STMicroelectronics ULN2004 Datasheet
Quảng cáo
Quảng cáo
DIP-16L SO-16
(Narrow)
TSSOP16
Features
•
Seven Darlingtons per package
•
Output current 500 mA per driver (600 mA peak)
•
Output voltage 50 V
•
Integrated suppression diodes for inductive loads
•
Outputs can be paralleled for higher current
•
TTL/CMOS/PMOS/DTL compatible inputs
•
Input pins placed opposite to output pins to simplify layout
ULN2001, ULN2002
ULN2003, ULN2004
Seven Darlington arrays
Datasheet
-
production data
Description
The ULN2001, ULN2002, ULN2003 and ULN
2004 are high-voltage, high-current Darlington arrays each containing seven open collector
Darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout.
The versions interface to all common logic families: ULN2001 (general purpose, DTL, TTL,
PMOS, CMOS); ULN2002 (14 - 25 V PMOS);
ULN2003 (5 V TTL, CMOS); ULN2004 (6 - 15 V
CMOS, PMOS).
These versatile devices are useful for driving a wide range of loads including solenoids, relay DC motors, LED display filament lamps, thermal printheads and high-power buffers.
The ULN2001A/2002A/2003A and 2004A are supplied in a 16-pin DIP package with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as
ULN2001D1/2002D1/2003D1/ 2004D1.
ULN2003 is also available in TSSOP16 package, for reduced application space.
November 2021
This is information on a product in full production.
DocID5279 Rev 14 1/21 www.st.com
Contents
Contents
ULN2001, ULN2002, ULN2003, ULN2004
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DIP-16L package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
SO-16 Narrow package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
1 Diagram
Figure 1. Schematic diagram
Diagram
ULN2001 (each driver) ULN2002 (each driver)
ULN2003 (each driver) ULN2004 (each driver)
DocID5279 Rev 14 3/21
21
Pin configuration
2 Pin configuration
ULN2001, ULN2002, ULN2003, ULN2004
Figure 2. Pin connections (top view)
4/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
3 Maximum ratings
Maximum ratings
Symbol
I
F
V
R
T
A
T
STG
V
O
V
I
I
C
I
B
T
J
ESD
Table 1. Absolute maximum ratings
Parameter
Output voltage
Input voltage (for ULN2002A/D - 2003A/D - 2004A/D)
Continuous collector current
Continuous base current
Clamping diode continuous current
Clamping diode reverse voltage
Operating ambient temperature range
Storage temperature range
Junction temperature
Electrostatic discharge rating - HBM
Value
50
30
500
25
350
50
- 40 to 85
- 55 to 150
150
2
Unit
V
V mA mA mA
V
°C
°C
°C kV
Note:
Symbol
R thJA
R thJC
R thJB
Table 2. Thermal data
Parameter DIP-16 SO-16 TSSOP16 Unit
70 64.7
93.3
° C/W Thermal resistance junction-ambient, Max.
Thermal resistance junction-case (top),
Max.
Thermal resistance junction-board, Max.
22
31.5
30.7
68.5
°
C/W
°
C/W
Maximum power dissipation is a function of T
J(max)
, R thJA
and T
A
. The maximum allowable power dissipation at any allowable ambient temperature is P
D
= (T
J(max)
– T
A
) / R thJA
.
Operating at the absolute maximum T
J
of +150°C can affect reliability.
DocID5279 Rev 14 5/21
21
Electrical characteristics
4 Electrical characteristics
ULN2001, ULN2002, ULN2003, ULN2004
T
A
= 25 °C unless otherwise specified.
Symbol
I
CEX
V
CE(SAT)
Collector-emitter saturation
I
I(ON)
I
I(OFF)
V
I(ON) h
FE
C
I t
PLH t
PHL
I
R
Parameter
Output leakage current
Input current (
)
Input current (
)
)
DC Forward current gain
Input capacitance
Turn-on delay time
Turn-off delay time
Table 3. Electrical characteristics
Test condition
V
CE
= 50 V, (
T
A
= 85 °C, V
CE
T
A
= 85 °C for ULN2002, V
CE
= 50 V,
V
I
= 6 V (
)
T
A
= 85 °C for ULN2002, V
CE
= 50 V,
V
I
I
C
= 100 mA, I
B
= 250 µA
I
C
= 200 mA, I
B
= 350 µA
I
C
= 350 mA, I
B
= 500 µA for ULN2002, V
I
= 17 V for ULN2003, V
I
= 3.85 V for ULN2004, V
I
= 5 V
V
I
= 12 V
T
A
= 85 °C, I
C
= 500 µA
V
CE
= 2 V, for ULN2002
I
C
= 300 mA for ULN2003
I
C
= 200 mA
I
C
= 250 mA
I
C
= 300 mA for ULN2004
I
C
= 125 mA
I
C
= 200 mA
I
C
= 275 mA
I
C
= 350 mA for ULN2001, V
CE
= 2 V,
I
C
= 350 mA
Clamp diode leakage current
0.5 V
I to 0.5 V
O
0.5 V
I to 0.5 V
O
V
R
= 50 V
T
A
= 85 °C , V
R
= 50 V
V
F
Clamp diode forward voltage
)
I
F
= 350 mA
50
1000
Min.
Typ.
Max.
Unit
50
100
500
µA
0.9
1.1
1.3
1.1
1.3
1.6
0.82
1.25
0.93
1.35
0.35
0.5
1 1.45
65
15
0.25
0.25
1.7
500
13
2.4
2.7
3
25
1
1
50
100
7
8
5
6
2
V mA
µA
V pF
µs
µs
µA
V
6/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
5 Test circuits
Figure 3. Output leakage current
Test circuits
Figure 4. Output leakage current (for ULN2002 only)
Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON)
Figure 7. Input current (OFF) Figure 8. Input voltage
DocID5279 Rev 14 7/21
21
Test circuits
Figure 9. Clamp diode leakage current
ULN2001, ULN2002, ULN2003, ULN2004
Figure 10. Clamp diode forward voltage
8/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
6
Typical performance characteristics
Typical performance characteristics
Figure 11. Collector current vs. saturation voltage (T
J
= 25 °C)
Figure 12. Collector current vs. saturation voltage
85°C
25°C
-30°C
Figure 13. Input current vs. input voltage
ULN2003A
Max
Typ
Min
I
IN
= 500 µA
VCE
SAT
[V]
Figure 14. Input current vs. input voltage
(Ta = 25 °C)
ULN2003A
Ta = 25
°
C
Iout=100 mA
Io ut=200mA
I ou t=300mA
Figure 15. Collector current vs. input current
85 °C
-30 °C
Figure 16. h
FE
vs. output current
10000
V
CE
= 2 V
85 °C
1000
40 °C
25 °C
100
25 °C
V
CE
= 2 V
10
1
1 10 100
Output current I
OUT
[mA]
I
IN
[ μ A]
1000
DocID5279 Rev 14 9/21
21
Typical performance characteristics ULN2001, ULN2002, ULN2003, ULN2004
Figure 17. Peak collector current vs. duty cycle
(DIP-16)
Ic peak
(mA)
D96IN451
NUMBER OF ACTIVE OUTPUT
7 6 5 4 3 2
500
Figure 18. Peak collector current vs. duty cycle
(SO-16)
Ic peak
(mA)
500
Tamb=70°C
(SO16)
D96IN452A
400
400
2
300
300
Tamb=70°C
(DIP16)
200 200
5
3
7
100
100
NUMBER OF ACTIVE OUTPUT
0
0 20 40 60 80 DC
0
0 20 40 60 80 100 DC
10/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
7 Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK is an ST trademark.
7.1 DIP-16L package information
Figure 19. DIP-16L package outline
0015895_E
DocID5279 Rev 14 11/21
21
Package information
Dim.
E1 e e1 eA eB
L b2 c
D
E
A
A1
A2 b
ULN2001, ULN2002, ULN2003, ULN2004
Table 4. DIP-16L mechanical data mm.
Min.
Typ.
0.38
2.92
0.36
1.14
0.20
18.67
7.62
6.10
2.92
3.30
0.46
1.52
0.25
19.18
7.87
6.35
2.54
17.78
7.62
3.30
Max.
5.33
4.95
0.56
1.78
0.36
19.69
8.26
7.11
10.92
3.81
12/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
7.2 SO-16 Narrow package information
Figure 20. SO-16 package outline
Package information
DocID5279 Rev 14 13/21
21
Package information
Dim.
A a1
D (1)
E e e3
F (1)
G
L a2 b b1
C c1
M
S
ULN2001, ULN2002, ULN2003, ULN2004
Min.
0.1
Table 5. SO-16 Narrow mechanical data mm.
Typ.
Min.
Max.
1.75
0.25 0.004 inch.
Typ.
Max.
0.069
0.009
0.35
0.19
9.8
5.8
0.5
1.6
0.46
0.25
45°
10
6.2
0.014
0.007
(typ.)
0.386
0.228
0.020
0.063
0.018
0.010
0.394
0.244
1.27
8.89
0.050
0.350
3.8
4.60
0.4
4.0
5.30
1.27
0.62
8° (max.)
0.150
0.181
0.150
0.157
0.208
0.050
0.024
14/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004 Package information
Figure 21. SO-16 Narrow tape and reel drawing
1
' &
$
3R
%R
.R
$R 3
1RWH'UDZLQJQRWLQVFDOH
T
Ao
Bo
Ko
Po
P
A
C
D
N
Dim.
Table 6. SO-16 Narrow tape and reel mechanical data mm.
Min.
12.8
20.2
60
-
6.45
10.3
2.1
3.9
7.9
Typ.
-
-
-
-
-
-
-
-
-
-
Max.
22.4
6.65
10.5
2.3
4.1
8.1
330
13.2
-
-
7
DocID5279 Rev 14 15/21
21
Package information
7.3 TSSOP16 package information
ULN2001, ULN2002, ULN2003, ULN2004
Figure 22. TSSOP16 package outline
L
D
NN
("(&1-"/&
5'#6+0) 2.#0'
& "
"
"
16/21
1*/*%&/5*'*$"5*0/
DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004 Package information
Dim.
L
L1 ʘ
D
E
E1 e b b1 c c1
A
A1
A2
A3
Table 7. TSSOP16 mechanical data mm.
Min.
0.05
0.90
0.39
0.20
0.19
0.13
0.12
4.90
6.20
4.30
0.45
0
Typ.
1.00
0.44
0.22
0.13
5.00
6.40
4.40
0.65 BSC
0.60
1.00 BSC
Max.
0.28
0.25
0.17
0.14
1.20
0.15
1.05
0.49
5.10
6.60
4.50
0.75
8°
Figure 23. TSSOP16 recommended footprint (dimensions are in mm)
DocID5279 Rev 14 17/21
21
Package information
'
ULN2001, ULN2002, ULN2003, ULN2004
Figure 24. TSSOP16 tape and reel drawing
1
&
$
18/21
3R
%R
.R
$R 3
1RWH'UDZLQJQRWLQVFDOH
Dim.
T
Ao
Bo
Ko
Po
P
A
C
D
N
Table 8. TSSOP16 tape and reel mechanical data mm.
Min.
12.8
20.2
60
-
6.7
5.3
1.6
3.9
7.9
Typ.
-
-
-
-
-
-
-
-
-
-
Max.
22.4
6.9
5.5
1.8
4.1
8.1
330
13.2
-
-
7
DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
8 Order codes
Order codes
Part number
ULN2001A
ULN2002A
ULN2003A
ULN2004A
ULN2001D1013TR
ULN2002D1013TR
ULN2003D1013TR
ULN2004D1013TR
ULN2003TTR
Table 9. Order codes
Package
DIP-16
DIP-16
DIP-16
DIP-16
SO-16 in tape and reel
SO-16 in tape and reel
SO-16 in tape and reel
SO-16 in tape and reel
TSSOP16 in tape and reel
DocID5279 Rev 14 19/21
21
Revision history
9 Revision history
ULN2001, ULN2002, ULN2003, ULN2004
Date
05-Dec-2006
28-Aug-2007
07-May-2012
01-Jun-2012
22-Jul-2015
07-Nov-2017
27-Jun-2018
09-Jul-2019
23-Jul-2020
30-Nov-2021
Revision
5
6
7
8
9
10
11
12
13
14
Table 10. Revision history
Changes
Order code updated and document reformatted.
Added Table 1 in cover page.
Modified: Figure 12 on page 9.
Added: Figure 13, 14, 15 and Figure 16 on page 9.
Updated: DIP-16L package mechanical data Table 4 on page 12 and
Figure 19 on page 11.
Added Plastic DIP16-L package.
Removed Device summary table.
Updated Table 7: Order code.
Added Section 7.2: Plastic DIP-16L package information.
Minor text changes.
Removed plastic DIP-16L package and associated order code
ULN2003A
Updated: I
I(ON)
test condition in Table 3: Electrical characteristics.
Added IF, VR, ESD parameters in Table 1: Absolute maximum ratings and note in Table 2: Thermal data.
Added new part number ULN2003TTR in Table 9: Order codes and new Section 7.3: TSSOP16 package information.
Updated Table 7: TSSOP16 mechanical data
.
20/21 DocID5279 Rev 14
ULN2001, ULN2002, ULN2003, ULN2004
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DocID5279 Rev 14 21/21
21
Tải xuống
Đã cập nhật liên kết công khai
Liên kết công khai đến cuộc trò chuyện của bạn đã được cập nhật. You may view and manage your chat links after registration here.
Liên kết công khai tài liệu
Quảng cáo
