Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRIA

NEW ZEALAND

CHINA

HONG KONG

INDIA

Customer Care Centre

1300 362 603

02-201-24-18

800 - SAMSUNG (800-726786)

010-6475 1880

(852) 3698-4698

Web Site www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com/hk www.samsung.com/hk_en/ www.samsung.com

INDONESIA

JAPAN

MALAYSIA

PHILIPPINES

SINGAPORE

THAILAND

TAIWAN

VIETNAM

3030 8282

1800 110011

1800 3000 8282

1800 266 8282

0800-112-8888

021-5699-7777

0120-327-527

1800-88-9999

1-800-10-SAMSUNG(726-7864)

1-800-3-SAMSUNG(726-7864)

1-800-8-SAMSUNG(726-7864)

02-5805777

1800-SAMSUNG(726-7864)

1800-29-3232

02-689-3232

0800-329-999

1 800 588 889 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

Plasma TV user manual

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

[PD8000-XY]BN68-03453M-00Eng.indb 1

BN68-03453M-00

E-MANUAL imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

2011-03-21 오전 11:00:20

For more information on how to use e-Manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎ The appearance may differ depending on the product.

✎ Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand.

Installation with a wall-mount.

10 cm 10 cm

10 cm 10 cm

10 cm 10 cm

10 cm

[PD8000-XY]BN68-03453M-00Eng.indb 2

English - 2

2011-03-21 오전 11:00:20

Accessories

✎ Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎ The items’ colours and shapes may vary depending on the models.

✎ Check that there is no accessory hidden behind packing materials when you open the box.

[ Do not insert your fingers into the stand base slot of the TV when installing the stand base.

• Remote Control & Batteries (AAA x 2)

• Owner’s Instructions

• Warranty Card (Not available in some locations) / Safety Guide

• Cleaning-Cloth

AV/Component Adapter Ferrite Core (2EA) Ferrite Core (1EA)

✎

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference.

When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

x A Maximum distance between the ferrite core and the end of the cord inserted in the TV:

6~8 inches x B Maximum distance between the ferrite core and the other end of the cord inserted in the

AC outlet: 3/4 inch)

A

Power Cord

✎

Ferrite Core : The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

B

Antenna Cable/

Component Cable

(sold separately)

[PD8000-XY]BN68-03453M-00Eng.indb 3

English - 3

2011-03-21 오전 11:00:21

Viewing the Control Panel

✎ The product colour and shape may vary depending on the model.

Control Panel

Remote control sensor

Power Indicator

SOURCE

MENU y z

E

Aim the remote control towards this spot on the TV.

Blinks and turns off when the power is on and lights up in standby mode.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E button on the remote control.

Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Adjusts the volume. In the OSD, use the y buttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the z buttons as you would use the ▼ and ▲ buttons on the remote control.

Turns the TV on or off.

P (Power)

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).

A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

[PD8000-XY]BN68-03453M-00Eng.indb 4

English - 4

2011-03-21 오전 11:00:21

Remote Side View

Displays and selects the available video sources.

Turns the TV on and off.

Gives direct access to channels.

Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press

‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Link to various application services.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

Buttons used in the Channel and

SMART HUB menu, etc.

Use these buttons in SMART HUB and

Anynet+ (HDMI-CEC) modes.

QWERTY Remote

POWER SOURCE ON/OFF

1

4

7 8

TTX/MIX 0

2

5

MUTE

M

<

CH LIST

P

<

3

6

9

PRE-CH

SMART

HUB

MENU

GUIDE

5

9

E

7

B C D

SEARCH W

E-MANUAL

P.SIZE

l AD/SUBT

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed.

(Using the remote control with this button set to On will reduce the battery usage time.)

Returns to the previous channel.

MUTE : Cuts off the sound temporarily.

CH LIST : Displays channel lists on the screen.

Changes channels.

Opens the OSD.

Displays the EPG (Electronic Programme

Guide).

Displays information on the TV screen.

Exits the menu.

SOCIAL TV : Connect to Social TV application.

SEARCH : Support to recommendation search word and search function.

W: Turns the 3D image on or off.

E-MANUAL : Displays the e-Manual.

P.SIZE

: Lets you select the Picture Size.

AD/SUBT: Turns the audio description on and off (not available in some locations). / Displays digital subtitles.

[PD8000-XY]BN68-03453M-00Eng.indb 5

English - 5

2011-03-21 오전 11:00:21

QWERTY Side View

Displays the characters the user typed in.

When the user presses ENTER E, all characters on the screen are removed.

A

1

4

$

7

&

!

ESC

B

2

@

5

%

8

*

0

)

C

3

#

6

^

9

(

CAPS

D

Q

_

A

`

TAP

SHIFT

W

-

S

~

Z

E

D

X

SYM

+

R

=

F

<

@

C

>

T

G

V

[

/

Y

]

H

;

B

,

U

{

J

:

N

.

.COM

I

}

K

‘

M

?

SYM

O

L

“

/

P

ENTER

SHIFT

|

SMART

HUB

E

SEARCH

Convenient QWERTY keyboard to type characters in

SMART HUB and SOCIAL TV menu, etc.

SYM : Enables the symbol printed on the lower right side of each button.

OFN(Optical Finger

Navigation) Sensor

In full browser function, it can be used as the pointer.

If the user doesn’t press any button during 30 seconds, the sensor will be off automatically.

To wake up the sensor, press any button on the

QWERTY side.

✎ NOTE

• The remote side doesn’t work when the QWERTY side is up, and vice versa.

Initial Pairing

1. When the user inserts batteries into the QWERTY Remote, “NEED PAIRING PRESS SYM+TAB” will be displayed on the screen.

2. Press the SYM and TAB buttons at the same time for more than 2 seconds.

✎ The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds after turning on the TV.

✎ Keep within 20 inches(50 cm) between the QWERTY Remote and the TV.

Performing the Pairing Process Again

1. If the QWERTY Remote has been paired before, press @ and ← on the QWERTY side for more than 3 seconds.

“RESET OK” will be displayed on the LCD screen of the QWERTY remote.

2. Press MUTE , 0, MUTE and 0 on the remote side of the QWERTY Remote as it faces the TV. This sequence must be completed within 4 seconds.

✎ There might be a slight delay between input and the response from the OSD. Do not wait for visual confirmation on the screen.

3. Follow the initial pairing process within 3 minutes. If the initial pairing process does not finish within 3 minutes, the whole process must be performed again.

[PD8000-XY]BN68-03453M-00Eng.indb 6

English - 6

2011-03-21 오전 11:00:21

Inserting Batteries

1

• Slide out the battery cover.

3

2

• Push the button right.

4

• Pull the battery tray out.

• Insert 4 AAA batteries in the tray, insert the battery tray into the QWERTY Remote and put the cover back on.

Changing the Input Source

Source

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

■ TV / PC / AV / Component /

HDMI1/DVI / HDMI2 / HDMI3 /

HDMI4 / USB / AllShare

✎ In the Source, connected inputs will be highlighted.

✎ PC always stay activated.

SOURCE

✎ When connecting a PC to the HDMI IN 1 (DVI) port with HDMI cable, you should set the TV to

PC mode under Edit Name.

✎ When connecting a PC to the HDMI IN 1 (DVI)

✎ port with HDMI to DVI cable, you should set the

TV to DVI PC mode under Edit Name.

When connecting an AV devices to the

HDMI IN 1 (DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under

Edit Name.

Edit Name

In the Source, press the TOOLS button, and then you can set an external input sources name you want.

■ VCR / DVD / Cable STB / Satellite STB /

PVR STB / AV Receiver / Game / Camcorder /

PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray

/ HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

Edit Favourites

In the Source, press the TOOLS button to select

Edit Favourites. You can set an external input source to Favourites.

Information

You can see detailed information about the selected external device.

Refresh

In the Source, If the external devices are not displayed, press the TOOLS button to select Refresh.

Search for connected devices.

English - 7

[PD8000-XY]BN68-03453M-00Eng.indb 7 2011-03-21 오전 11:00:22

✎ For best cable connection to this product, be sure to use cables with a maximum thickness as below:

• Maximum thickness - 0.55 inches (14mm)

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎ The PDP device may interfere with an amateur radio or AM radio.

✎ When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the TV to malfunction.

Cable VHF/UHF Antenna

ANT IN or

[PD8000-XY]BN68-03453M-00Eng.indb 8

English - 8

2011-03-21 오전 11:00:22

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.

Press the POWER P button. Plug & Play is available only when the Source is set to TV.

✎ Before turning on the TV, make sure the antenna cable is connected (p. 6).

1 Selecting a language Press the ▲ or ▼ button, then press the ENTER E button.

Select the desired OSD (On Screen Display) language.

(Not available in some locations)

2

3

Wired/Wireless

Network Connection

Software upgrade

Set up your network connection. Press the ENTER E button to start. If you want to setting to it later, select Skip. For more information, refer to “Wired/Wireless

Network Connection” in the e-Manual.

When network connection settings are complete, Software Upgrade is available.

Select Next to upgrade TV software. Your TV will automatically upgrade, if your

TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to “Software Upgrade” (Preference Features → Support

Menu) in the e-Manual.

4 Selecting Store

Demo or Home Use

✎ This may take some time, depending on network status.

Press the ◄ or ► button, then press the ENTER E button.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

5 Selecting an country Press the ▲ or ▼ button, then press the

Select the appropriate country.

ENTER E button.

6 Selecting an area Press the ▲ or ▼ button, then press the ENTER E button.

Select the appropriate area. (Not available in some locations)

7 Setting the

Clock Mode

Set the Clock Mode automatically or manually.

Auto: Allows you to select a time zone.

✎ Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER E button. (Australia only).

Manual: Allows you to manually set the current date and time.

8 Selecting a channel Select the channel source to memorise among Digital & Analogue / Digital /

Analogue. When done, select Next. Scans for a channel automatically and stores in the TV.

9 Enjoy your TV. If you want to watch a broadcast programme, select Close. If you want to enjoy the Smart Hub, select the Smart Hub. The Smart Hub will start. For more detailed information, refer to “Smart Hub” in the e-Manual.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”

If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play ( MENU → System) again at home although you did in shop.

✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 9

[PD8000-XY]BN68-03453M-00Eng.indb 9 2011-03-21 오전 11:00:22

Connecting to an AV devices

¦¦

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR

HDMI connection

HDMI OUT

HDMI to DVI connection

DVI OUT

AUDIO OUT

R-AUDIO-L

Using an HDMI or an HDMI/DVI cable (up to 1080p)

✎ HDMI IN 1 (DVI), 2 (ARC), 3, 4 / PC/DVI AUDIO IN x For better picture and audio quality, connect to a digital device using an HDMI cable.

x An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

x Be sure to use an HDMI cable with a thickness of 14 mm or less.

x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.

x This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2 (ARC) port only.

– If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this case, set 3D Auto View or 3D Mode to Off.

x The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.

English - 10

[PD8000-XY]BN68-03453M-00Eng.indb 10 2011-03-21 오전 11:00:23

Component connection

COMPONENT OUT

P

B

AUDIO OUT

Y

R-AUDIO-L

AV connection

AUDIO OUT

R-AUDIO-L

VIDEO OUT

Using a Component (up to 1080p) or an Audio/Video (480i only) Cable

✎ When connecting to

(yellow).

AV IN , the colour of the AV IN [VIDEO] jack (green) will not match the video cable

✎ To obtain the best picture quality, the Component connection is recommended over the A/V connection.

[PD8000-XY]BN68-03453M-00Eng.indb 11

English - 11

2011-03-21 오전 11:00:23

Connecting to a PC and Audio device

¦ Available devices: digital audio system, amplifier, DVD home theatre

OPTICAL

DVD home theatre connection

Audio connection

AUDIO IN

R-AUDIO-L

Using an Optical (Digital) or an Audio (Analogue) Cable Connection

✎ DIGITAL AUDIO OUT (OPTICAL) x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.

When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.

When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-

Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎ AUDIO OUT : Connects to the audio input jacks on your amplifier/DVD home theatre.

x When connecting, use the appropriate connector.

x When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

[PD8000-XY]BN68-03453M-00Eng.indb 12

English - 12

2011-03-21 오전 11:00:24

¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

✎ Connecting through the HDMI cable may not be supported depending on the PC.

PC connection

HDMI OUT

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and HDMI to DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode

IBM

MAC

VESA DMT

VESA DMT /

DTV CEA

Resolution

640 x 350

720 x 400

640 x 480

832 x 624

1152 x 870

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1280 x 800

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1440 x 900

1600 x 1200

1680 x 1050

1920 x 1080p

Horizontal Frequency (KHz)

31.469

31.469

35.000

49.726

68.681

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

47.712

55.935

70.635

75.000

65.290

67.500

Vertical Frequency (Hz) Pixel Clock Frequency (MHz)

70.086

70.087

25.175

28.322

66.667

74.551

75.062

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.015

59.887

74.984

60.000

59.954

60.000

30.240

57.284

100.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

83.500

106.500

108.000

85.500

106.500

136.750

162.000

146.250

148.500

✎ NOTE x For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack. x The interlace mode is not supported. x The set might operate abnormally if a non-standard video format is selected. x Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

Sync Polarity (H / V)

+/-

-/+

-/-

-/-

-/-

-/-

+/+

+/+

+/+

+/+

-/+

-/+

+/+

+/+

-/+

-/+

+/+

-/+

-/-

-/-

-/-

+/+

+/+

+/+

-/-

+/+

English - 13

[PD8000-XY]BN68-03453M-00Eng.indb 13 2011-03-21 오전 11:00:24

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.

The LAN Port on the Wall

Wireless IP sharer

(router having DHCP server)

TV

LAN Cable

This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE

802.11n. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup.

They are illustrated below:

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

TV Rear Panel

Modem Cable LAN Cable

The LAN Port on the Wall

TV Rear Panel

LAN Cable

✎ It is not supported when the network speed is under 10 Mbps.

English - 14

[PD8000-XY]BN68-03453M-00Eng.indb 14 2011-03-21 오전 11:00:25

How to view the e-Manual

E-MANUAL

You can read the introduction and instructions about the TV features stored in your TV.

O MENU m → Support → e-Manual → ENTER E

✎ If you want to return to e-Manual, press E-MANUAL button on remote.

✎ You can’t use the Try Now function, if the menu is not activated.

Screen Display

TV Screen: Displays the current input source screen.

Help: Displays the e-Manual

Guide or Product Guide. Press

ENTER E button.

Help

Change the category. Press l or r button to select category you want.

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

Displays the sub-menu list. Press

ENTER E button to select submenu you want.

Index

Index: Displays index screen.

X: Exit the e-Manual.

Using the Help

Display the e-Manual Guide & the Product Guide by pressing Help.

‰ How to view the e-Manual

You can read the introduction and instructions about the TV features stored in your TV.

O MENU m → Support → e-Manual →

ENTER E

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

Index Help

Cinema - quality 3D experience

3-Dimensional TVs add new depth and dimension to create larger-than life experiences. 3D

Active Glasses sync up with the 3D TV to produce

3D images that virtually leap off the screen. Favorite shows can even be transformd to 3D in

Favourite for the ultimate “reality” TV.

<e-Manual Guide>

The e-Manual guide appears as above.

Return

How to toggle between the e-Manual and the corresponding menu(s).

<Product Guide>

The product guide appears as above.

Return

Help

Basic Features > Changing the Preset Picture Mode (5/10)

‰ Changing the Preset Picture Mode

■

Picture Mode t

Select your preferred picture type.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain: Suitable for watching movies and games.

Try Now Home Zoom Index

✎ This function is not enabled in some menus.

Try Now

E-MANUAL

Picture

Picture Mode

Cell Light

Contrast

Brightness

Sharpness

Colour

Tint (G/R) G 50

Standard

14

100

45

50

50

R 50

English - 15

[PD8000-XY]BN68-03453M-00Eng.indb 15 2011-03-21 오전 11:00:31

Method 1

1. Select Try Now, when you want to execute the corresponding menu(s).

2. To return to the e-Manual screen, press the

E-MANUAL button.

Method 2

1. Press the ENTER E button when selecting

Contents Area. The “Are you sure?” is displayed.

Select Yes and then press the ENTER E button.

The OSD window will be displayed.

2. To return to the e-Manual screen, press the

E-MANUAL button.

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (5/10)

‰ Changing the Preset Picture Mode

O MENU m → Picture → Picture Mode → ENTER E

■

Picture Mode t

Select your preferred picture type.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain: Suitable for watching movies and games.

Help Try Now Home Zoom Index

Try Now: Displays the corresponding menu(s).

Home: Moves to the e-Manual home screen.

Zoom: Magnifies a screen.

Index: Displays index screen.

Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the l or r button.

Using the Zoom mode

When you view the e-Manual instruction, select the

Zoom to magnify the screen. You can scroll through the magnified screen by using the u or d buttons.

✎

To return to the previous screen, press the button.

RETURN

‰ Changing the Preset Picture Mode

O MENU m → Picture → Picture Mode → ENTER E

■

Picture Mode t

Select your preferred picture type.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural

for LED TV

/ Relax

for PDP TV

: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain: Suitable for watching movies and games.

How to search a keyword by using index page

✎ This function may not be supported depending on the language.

1. If you want to search a keyword, press the u / d / l / r button to select Index.

2. Press the l or r button to select a character order you want, and then press the ENTER E button.

3. Press the u or d button to select a keyword you want to see, and then press the ENTER E button.

4. You can view the corresponding e-Manual instruction screen.

✎

To close the Index screen, press the RETURN button.

Return

English - 16

[PD8000-XY]BN68-03453M-00Eng.indb 16 2011-03-21 오전 11:00:32

Installing the Wall Mount

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifications (VESA)

✎ The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎ NOTE

• Standard dimensions for wall mount kits are shown in the table below.

• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

• Do not use screws that do not comply with the VESA standard screw specifications.

• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

• Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

• Our 59” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

• Do not mount the TV at more than a 15 degree tilt.

• Always use two people to mount the TV to a wall.

Product Family inches VESA Spec. (A * B) Standard Screw Quantity

51 400 X 400

PDP - TV M8 4

59~64 600 X 400

✎ Unscrew the hole around before installing Wall-Mount on the wall.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

[PD8000-XY]BN68-03453M-00Eng.indb 17

English - 17

2011-03-21 오전 11:00:33

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues

The TV won’t turn on.

There is no picture/video.

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

Solutions and Explanations

• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below.

• Check cable connections (remove and reconnect all cables connected to the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.

✎ Some of above pictures and functions are available at specific models only.

✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →

Support → Downloads) by USB.

Licence

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

3D

This exciting new feature enables you to view 3D content.

SMART HUB

The Gateway to all content integrated in one place.

• It’s all integrated to guide you to easier and diverse entertainment choices.

• Control your entertainment life with easy and simple user friendly UI.

• Access to diverse Apps that are adding up every day.

• Customize your TV, by App grouping & sorting to your taste.

AllShare™

AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

Anynet+(HDMI-CEC)

Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

English - 18

[PD8000-XY]BN68-03453M-00Eng.indb 18 2011-03-21 오전 11:00:33

Securing the TV to the wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety

Flyer. For added stability and safety, install the anti-fall device as follows.

To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall.

Confirm that the screws have been firmly installed onto the wall.

✎ You may need additional material such as an anchor depending on the type of wall.

✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.

✎ NOTE

Wall x Install the TV near to the wall so that it does not fall backwards.

x It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

x Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Storage and Maintenance

✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.

Clean the product with a soft cloth dapped in a small amount of water.

[PD8000-XY]BN68-03453M-00Eng.indb 19

English - 19

2011-03-21 오전 11:00:34

Model Name

Battery

Dimension(WxDxH)

Weight

Specifications - Qwerty Remote

RMC-QTD1

AAA x 4

To extend the battery life, use of alkaline battery is recommended.

2.4 X 1.0 X 6.0 inches

(60.9 x 24.36 x 152.2 mm)

0.295 lbs (134 g)

Specifications

Display Resolution

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Stand Swivel (Left / Right)

Model Name

Screen Size

Sound

(Output)

Dimensions (WxDxH)

Body

With stand

Weight

Without Stand

With Stand

PS51D8000

51 inches

10 W X 2

1195.9 x 37.2 x 719.4 mm

1195.9 x 309.5 x 802.0 mm

1920 x 1080

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

-20˚ ~ 20˚

PS59D8000

59 inches

1378.4 x 37.1 x 827.3 mm

1378.4 x 351.6 x 917.8 mm

15 W X 2

PS64D8000

64 inches

1487.9 X 37.1 X 888.9 mm

1487.9 X 351.6 X 979.2 mm

22.4 kg

24.8 kg

30.6 kg

33.9 kg

35.0 kg

38.3 kg

✎ Design and specifications are subject to change without prior notice.

✎ For information about power supply, and more about power consumption, refer to the label attached to the product.

[PD8000-XY]BN68-03453M-00Eng.indb 20

English - 20

2011-03-21 오전 11:00:34