Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRALIA

NEW ZEALAND

CHINA

HONG KONG

INDIA

Customer Care Centre

1300 362 603

0800 SAMSUNG (0800 726 786)

400-810-5858

010-6475 1880

(852) 3698-4698

Web Site www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com/hk www.samsung.com/hk_en/ www.samsung.com

INDONESIA

JAPAN

MALAYSIA

PHILIPPINES

SINGAPORE

THAILAND

TAIWAN

VIETNAM

3030 8282

1800 110011

1800 3000 8282

1800 266 8282

0800-112-8888

021-5699-7777

0120-327-527

1800-88-9999

1-800-10-SAMSUNG(726-7864)

1-800-3-SAMSUNG(726-7864)

1-800-8-SAMSUNG(726-7864)

02-5805777

1800-SAMSUNG(726-7864)

1800-29-3232

02-689-3232

0800-329-999

1 800 588 889 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

Plasma TV

user manual

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

[PD450-XY]BN68-03493A.indb 1

BN68-03493A-0 1

E-MANUAL

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com/register

Model _____________ Serial No. _____________

2011-01-27 오전 12:04:04

For more information on how to use e-Manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎ The appearance may differ depending on the product.

✎ Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand.

10 cm

10 cm

10 cm

10 cm

Installation with a wall-mount.

10 cm

10 cm

10 cm

English - 2

[PD450-XY]BN68-03493A.indb 2 2011-01-27 오전 12:04:04

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎ The items’ colours and shapes may vary depending on the models.

✎ Check that there is no accessory hidden behind packing materials when you open the box.

[ CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Remote Control & Batteries (AAA x 2)

• Owner’s Instructions

• Warranty Card (Not available in some locations) / Safety Guide

• Power Cord

• Cleaning-Cloth

✎ 43 inch model

Ferrite Core (2EA)

✎ Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

• A Minimum distance between the ferrite core and the end of the cord inserted in the

TV: 8 inches

• B Maximum distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inch

✎

51 inch model

A

Power Cord

B

Ferrite Core (2EA) Ferrite Core (1EA)

✎

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

• A Minimum distance between the ferrite core and the end of the cord inserted in the

TV: 8 inches

• B Maximum distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inch

✎ Ferrite Core : The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

A

Power Cord

B

Antenna Cable/

Component Cable

(sold separately)

English - 3

[PD450-XY]BN68-03493A.indb 3 2011-01-27 오전 12:04:05

Viewing the Control Panel

✎ The product colour and shape may vary depending on the model.

Control Panel

Remote control sensor

Power Indicator

SOURCE

MENU y

E z

P (Power)

Aim the remote control towards this spot on the TV.

Blinks and turns off when the power is on and lights up in standby mode.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E button on the remote control.

Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Adjusts the volume. In the OSD, use the y buttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the would use the ▼ and

Turns the TV on or off.

▲ z

buttons on the remote control.

buttons as you

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).

A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

[PD450-XY]BN68-03493A.indb 4

English - 4

2011-01-27 오전 12:04:05

Viewing the Remote Control

✎ This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons.

Turns the TV on and off.

Displays and selects the available video sources.

Have direct access to channels.

Alternately select Teletext ON, Double,

Mix or OFF.

Adjusts the volume.

Opens the OSD.

Displays the Content Home, which includes Watch TV , My Downloads and

Source .

Quickly select frequently used functions.

Returns to the previous menu.

These buttons are for the Channel

Manager, My Downloads menu, etc.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme

Guide).

Displays information on the TV screen.

u / d / l / r : Move the cursor on-screen menu item.

ENTER E : Selects the menu and changes the corresponding item value.

Exits the menu.

Use these buttons in My Downloads and Anynet+ (HDMI-CEC) modes.

(The Ă button also controls recording for Samsung recorders that have the

Anynet+ (HDMI-CEC).)

P.MODE

: Press to select the Picture

Mode .

SRS : Selects the Sound Mode .

DUAL f − g : Sound effect selection.

AD/SUBT.

: Turns the audio description on and off (not available in some locations). /

Displays digital subtitles.

P.SIZE

: Selects the Picture Size .

E-MANUAL : Displays the e-Manual .

Installing batteries (Battery size: AAA)

English - 5

[PD450-XY]BN68-03493A.indb 5 2011-01-10 오후 2:56:56

Changing the Input Source

Source

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box /STB satellite receiver.

■ TV / AV / Component1 /

Component2 / PC / HDMI1/DVI /

HDMI2 / USB

✎ In the Source be highlighted.

, connected inputs will

✎ PC always stay activated.

✎

If the connected external devices are not highlighted, press the red button. The TV will search for connected devices.

■ VCR / DVD / Cable STB / Satellite STB / PVR

STB / AV Receiver / Game / Camcorder / PC /

DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD

DVD / DMA : Name the device connected to the input jacks to make your input source selection easier.

✎

When connecting a PC to the HDMI IN 1 (DVI) port with HDMI cable, you should set the TV to

PC mode under Edit Name .

✎ When connecting a PC to the HDMI IN 1 (DVI) port with HDMI to DVI cable, you should set the

TV to DVI PC mode under Edit Name .

✎ When connecting an AV devices to the HDMI IN 1

(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name .

Edit Name

In the Source , press the TOOLS button, and then you can set an external input sources name you want.

Information

You can see detailed information about the selected external device.

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

✎ The PDP device may interfere with an amateur radio or AM radio.

✎ When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the TV to malfunction.

Cable VHF/UHF Antenna

Power Input or

[PD450-XY]BN68-03493A.indb 6

English - 6

2011-01-27 오전 12:04:06

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.

Press the POWER P button. Plug & Play is available only when the Source is set to TV.

✎ Before turning on the TV, make sure the antenna cable is connected (p. 6).

✎

To return to the previous step, press the Red button.

1 Selecting Store

Demo or Home Use

Press the ◄ or ► button, then press the ENTER E button.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

POWER P

Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

2 Selecting a Country Press the ▲ or ▼ button, then press the ENTER E button. Select the appropriate country.

✎ After selecting the Country in the Country menu, some models may proceed with an additional option to setup the pin number.

3

4

Setting the

Mode

Clock

Selecting and memorising channels

When you input the PIN number, “0-0-0-0” is not available.

Set the Clock Mode automatically or manually.

Auto : Allows you to select a time zone.

✎

Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER E button. (Australia only)

Manual : Allows you to manually set the current date and time.

Select the channel search option to memorise. Press the l or r button to select Digital & Analogue , Digital or Analogue , and then press ENTER E . A check appears on your selection. Select Next , and then press the ENTER E button. The channel search will start. For more information, refer to “Channel →

Memorising Channels” in the e-Manual.

Press the ENTER E button at any time to interrupt the memorisation process.

5 Enjoy your TV. Press the ENTER E button.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”

If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play ( MENU → System ) again at home although you did in shop.

[PD450-XY]BN68-03493A.indb 7

English - 7

2011-01-27 오전 12:04:07

Connecting to an AV devices

¦ ¦

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR

HDMI connection

HDMI OUT

HDMI to DVI connection

DVI OUT

AUDIO OUT

R-AUDIO-L

Using an HDMI or an HDMI to DVI cable (up to 1080p)

✎ HDMI IN 1 (DVI), 2 / PC/DVI AUDIO IN x When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack for video. A DVD player, Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to

HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI IN jack is required for audio.

x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

[PD450-XY]BN68-03493A.indb 8

English - 8

2011-01-27 오전 12:04:07

Component connection

AUDIO OUT

COMPONENT OUT

P

R

R-AUDIO-L

P

B

G

AV connection

VIDEO OUT

AUDIO OUT

R-AUDIO-L

Using a Component (up to 1080p) or an Audio/Video (480i only) Cable

✎ When connecting to

(yellow).

AV IN , the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable

✎ To obtain the best picture quality, the Component connection is recommended over the A/V connection.

[PD450-XY]BN68-03493A.indb 9

English - 9

2011-01-27 오전 12:04:07

Connecting to a PC and Audio device

¦ Available devices: digital audio system, amplifier, DVD home theatre, PC

Audio connection

AUDIO IN

R-AUDIO-L

OPTICAL

DVD home theatre connection

Using an Optical (Digital) or an Audio (Analog) Cable Connection

✎

DIGITAL AUDIO OUT (OPTICAL) x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.

When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.

When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-

Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎

AUDIO OUT : Connects to the audio input jacks on your amplifier/DVD home theater.

x When connecting, use the appropriate connector.

x When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

[PD450-XY]BN68-03493A.indb 10

English - 10

2011-01-27 오전 12:04:08

¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

✎

Connecting through the HDMI cable may not be supported depending on the PC.

PC connection

PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT

Display Modes (D-Sub and an HDMI to DVI Input)

Optimum resolution:

• PS43D450, PS43D451: 1024 X 768 @ 60Hz

• PS51D450, PS51D451: 1360 X 768 @ 60Hz

Mode

IBM

MAC

VESA DMT

Resolution

640 x 350

720 x 400

640 x 480

832 x 624

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1360 x 768

Horizontal

Frequency (KHz)

31.469

31.469

35.000

49.726

31.469

37.500

37.861

37.879

46.875

48.077

48.363

56.476

60.023

47.712

Vertical

Frequency (Hz)

70.086

70.087

66.667

74.551

59.940

75.000

72.809

60.317

75.000

72.188

60.004

70.069

75.029

60.015

Pixel Clock

Frequency (MHz)

25.175

28.322

30.240

57.284

25.175

31.500

31.500

40.000

49.500

50.000

65.000

75.000

78.750

85.500

Sync Polarity

(H / V)

+/-

-/+

-/-

-/-

+/+

+/+

-/-

-/-

-/-

-/-

-/-

+/+

+/+

+/+

✎ NOTE x For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack. x The interlace mode is not supported. x The set might operate abnormally if a non-standard video format is selected. x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

PS43D450

PS43D451

>

>

>

>

>

>

>

>

>

>

>

>

>

PS51D450

PS51D451

>

>

>

>

>

>

>

>

>

>

>

>

>

>

English - 11

[PD450-XY]BN68-03493A.indb 11 2011-01-27 오전 12:04:09

How to view the e-Manual

E-MANUAL

You can read the introduction and instructions about the TV features stored in your TV.

O

MENU

m →

Support

→

e-Manual

→

ENTER

E

✎ If you want to return to e-Manual, press E-MANUAL button on remote.

✎

You can’t use the Try Now function, if the menu is not activated.

Screen Display

TV Screen: Displays the current input source screen.

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

Change the category. Press l or r button to select category you want.

Displays the sub-menu list. Press

ENTER E button to select submenu you want.

} Index E Enter e Exit

Operation Buttons:

} Blue ( Index ): Displays index screen.

E Enter : Select a category or sub-menu.

e Exit : Exit the e-Manual.

How to toggle between the e-Manual and the corresponding menu(s).

Basic Features > Changing the Preset Picture Mode (1/1)

‰ Changing the Preset Picture Mode

■

O MENU m → Picture t

→ Picture Mode → ENTER E

■

• Dynamic : Suitable for a bright room.

•

•

N

•

•

•

•

•

•

In PC

Relax

Movie

mode, you can only select

Dynamic

Standard

/ Relax

Entertain

: Suitable for a bright room.

and Standard .

for PDP TV

: Suitable for reducing eye strain.

: Suitable for a normal environment.

: Suitable for watching movies and games.

: Suitable for watching movies in a dark room.

• Entertain : Suitable for watching movies and games.

Try Now

E-MANUAL

Picture Mode : Standard r

Cell Light

Contrast

Brightness

Sharpness

Colour

Tint (G/R)

Screen Adjustment

: 10

: 100

: 45

: 50

: 50

: G50/R50 a Try Now b Home { Zoom } Index L Page e Exit

✎ This function is not enabled in some menus.

Method 1

1. If you want to use the menu that corresponds to an e-Manual topic, press the red button to select

Try Now .

2. To return to the e-Manual screen, press the

E-MANUAL button.

Method 2

1. Press the ENTER E button when selecting

Contents Area. The “ Are you sure?

” is displayed.

Select Yes and then press the ENTER E button.

The OSD window will be displayed.

2. To return to the e-Manual screen, press the

E-MANUAL button.

English - 12

[PD450-XY]BN68-03493A.indb 12 2011-01-27 오전 12:04:11

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (1/1)

‰ Changing the Preset Picture Mode

O MENU m → Picture → Picture Mode → ENTER E

■

Picture Mode

Select your preferred picture type.

N

•

In PC mode, you can only select Entertain and Standard .

Dynamic : Suitable for a bright room.

•

•

Standard

Relax

: Suitable for a normal environment.

: Suitable for reducing eye strain.

•

•

Movie : Suitable for watching movies in a dark room.

Entertain : Suitable for watching movies and games.

Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the l or r button.

a Try Now b Home { Zoom } Index L Page e Exit

Operation Buttons: a Red ( Try Now ): Displays the corresponding menu(s). b Green ( Home ): Moves to the e-Manual home screen.

{ Yellow ( Zoom ): Magnifies a screen.

} Blue ( Index ): Displays index screen.

L ( Page ): Moves to previous or next page.

Using the Zoom mode

When you view the e-Manual instruction, press the yellow button to magnify the screen. You can scroll through the magnified screen by using the u or d buttons.

✎

To return to the previous screen, press the button.

RETURN

‰ Changing the Preset Picture Mode

O MENU m → Picture → Picture Mode → ENTER E

■

Picture Mode

Select your preferred picture type.

N In PC mode, you can only select Entertain and Standard .

• Dynamic : Suitable for a bright room.

• Standard : Suitable for a normal environment.

• Relax : Suitable for reducing eye strain.

• Movie : Suitable for watching movies in a dark room.

k¦ Move ¦¦¦R Return

How to search a keyword by using index page

✎ This function may not support depending on the language.

1. If you want to search a keyword, press the blue button to select Index .

2. Press the l or r button to select a character order you want, and then press the ENTER E button.

3. Press the u or d button to select a keyword you want to see, and then press the ENTER E button.

4. You can view the corresponding e-Manual instruction screen.

✎

To close the Index screen, press the Return button.

[PD450-XY]BN68-03493A.indb 13

English - 13

2011-01-27 오전 12:04:12

Installing the Wall Mount

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifications (VESA)

✎ The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎ NOTE x Standard dimensions for wall mount kits are shown in the table below.

x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

x Do not use screws that do not comply with the VESA standard screw specifications.

x Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

x For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

x Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

x Do not mount the TV at more than a 15 degree tilt.

Product Family

PDP-TV inches

43~51

59~64

VESA Spec.

(A * B)

400 X 400

600 X 400

Standard Screw Quantity

M8 4

✎

Unscrew the hole around before installing Wall-Mount on the wall.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

[PD450-XY]BN68-03493A.indb 14

English - 14

2011-01-27 오전 12:04:12

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues

The TV won’t turn on.

There is no picture/video.

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

Solutions and Explanations

• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below.

• Check cable connections (remove and reconnect all cables connected to the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the

SAMSUNG TV code.

✎

Some of above pictures and functions are available at specific models only.

✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →

Support → Downloads) by USB.

Licence

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

Anynet+(HDMI-CEC)

Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.

My Downloads

Allows you to play music files, pictures, and movies saved on a USB device.

[PD450-XY]BN68-03493A.indb 15

English - 15

2011-01-27 오전 12:04:13

Securing the TV to the wall

Caution : Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety

Flyer. For added stability and safety, install the anti-fall device as follows.

To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall.

Confirm that the screws have been firmly installed onto the wall.

✎ You may need additional material such as an anchor depending on the type of wall.

✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.

✎

NOTE

Wall x Install the TV near to the wall so that it does not fall backwards.

x It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

x Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Storage and Maintenance

✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.

Clean the product with a soft cloth dapped in a small amount of water.

English - 16

[PD450-XY]BN68-03493A.indb 16 2011-01-27 오전 12:04:13

Specifications

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Stand Swivel (Left / Right)

Model Name

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

0˚

Screen Size

Sound

(Output)

Dimensions (WxDxH)

Body

With stand

Weight

Without Stand

With Stand

Display Resolution

PS43D450

PS43D451

43 inches

1011.8 X 56.0 X 622.4mm

1011.8 X 250 X 698.7mm

16.0 kg

19.0 kg

1024 X 768

10 W X 2

PS51D450

PS51D451

51 inches

1187.8 X 56.0 X 706.6mm

1187.8 X 250.0 X 782.9mm

22.5 kg

25.5 kg

1360 X 768

✎ Design and specifications are subject to change without prior notice.

✎ For information about power supply, and more about power consumption, refer to the label attached to the product.

[PD450-XY]BN68-03493A.indb 17

English - 17

2011-01-27 오전 12:04:13