U-Line U-CO29FW-00A Compact Refrigerator Quick Start Guide

QUICK START GUIDE
Combo® Models & Refrigerators / Freezers
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Refrigerator Drawers, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Integrated Panel
Instructions, Compliance Documentation and Product Warranty information are all available for reference and download at
u-line.com under Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
2
Safety and Warning
2
Environmental Requirements
2
Water Hookup
4
Door Swing
5
General Installation
6
Control Operation
6
First Use
7
Ice
7
Sabbath Mode
8
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Combo® Models
U-CO29FB-00A
U-CO29FW-00A
U-CO1224FS-00A
U-CO1224FINT-00A
U-CO1224FB-40A
U-CO1224FW-00A
Marine Series
ULN-CO29B-03A
ULN-CO29B-20A
ULN-CO29W-03A
ULN-CO29W-20A
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
1
QUICK START GUIDE
u-line.com
Safety and Warning
Environmental Requirements
NOTICE
This unit is designed to operate between 50°F (10°C) and
100°F (38°C). Higher ambient temperatures may reduce
PLEASE READ all instructions before installing,
the unit’s ability to reach low temperatures and/or reduce
operating, or servicing the appliance.
ice production on applicable models.
Use this appliance for its intended purpose only and follow
For best performance, keep the unit out of direct sunlight
these general precautions with those listed throughout this
and away from heat generating equipment.
guide:
In climates where high humidity and dew points are
SAFETY ALERT DEFINITIONS
present, condensation may appear on outside surfaces.
Throughout this guide are safety items labeled with a
This is considered normal. The condensation will
Danger, Warning or Caution based on the risk type:
evaporate when the humidity drops.
! DANGER
! CAUTION
Danger means that failure to follow this safety
Damages caused by ambient temperatures of
statement will result in severe personal injury or
40°F (5°C) or below are not covered by the
death.
warranty.
! WARNING
Water Hookup
Warning means that failure to follow this safety
PREPARE PLUMBING
statement could result in serious personal injury
Please use a braided stainless steel water supply line.
or death.
P/N (WATERHOOKUP).
! CAUTION
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
Plumbing installation must observe all state and
personal injury, property or equipment damage.
local codes. All water and drain connections
MUST BE made by a licensed/qualified plumbing
contractor. Failure to follow recommendations
and instructions may result in damage and/or
harm.
2
QUICK START GUIDE
u-line.com
1. Turn off water supply and disconnect electrical supply
Water Supply Connection
to product prior to attempting installation.
When connecting the water supply, please note the
following:
2. Remove the back panel.
• Before installing the unit and connecting to the cold
water supply, review the local plumbing codes.
3. Locate water valve inlet.
• The water pressure should be between 20 and 120 psi.
• The water line MUST have a shut-off valve in the
supply line.
• The water line should be looped into 2 coils. This will
allow the unit to be removed for cleaning and servicing.
However, make certain that the tubing is not pinched
or damaged during installation.
4. Break away filler feature
! CAUTION
in bushing, with flat
screwdriver.
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
Remove
ZLWKɠDW
screwdriver
home.
Do not use Teflon tape or joint compound on the
5. Thread water line
water fitting. The rubber washer provides an
through back panel hole
adequate seal. Other materials could cause
(with bushing).
blockage of the valve.
6. Locate water valve inlet
Failure to follow recommendations and
and connect to valve.
instructions may result in damage and/or harm,
flooding or void the product warranty.
7. Turn on water supply
and check for leaks.
! CAUTION
8. Reinstall back panel.
Turn off water supply and disconnect electrical
supply to unit prior to installation.
Use caution when handling back panel. The
edges could be sharp.
3
QUICK START GUIDE
u-line.com
Integrated models require 1/4" (6 mm) clearance if
9. Install retaining clip.
installed next to a wall. Allow for additional space for any
knobs or pulls installed on the integrated panel/frame.
BI SERIES
1/4" Min. (6 mm)
90°
Door Swing
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 1/4"
Door Swing
(6 mm) to accommodate the handle if the unit is installed
next to a wall.
1200 SERIES
Wall
MARINE SERIES
Wall
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
Wall
3/4" (19 mm) Min.
90°
Door Swing
90°
Door Swing
90°
Door Swing
Units have a zero clearance for the door to open 90°,
All units have a zero clearance for the door to open 90°.
when installed adjacent to cabinets.
U-Line recommends a minimum door clearance of 3/4"
(19 mm) to accommodate the handle if the unit is
Stainless Steel and black and white models require 2-1/8"
installed next to a wall or similar type of structure.
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
4
QUICK START GUIDE
u-line.com
General Installation
2. If the unit is not level, adjust the feet on the corners of
the unit as necessary.
MARINE AND BI SERIES
LEVELING INFORMATION
NOTICE
It is extremely important that these units sit on
a level surface, as they do not have feet levelers.
If they are not level, the ice mold will not fill
evenly.
Turn Foot to Adjust
Use a level to confirm
the unit is level. Level
3. Confirm the unit is level after each adjustment and
should be placed along
repeat the previous steps until the unit is level.
top edge and side edge
as shown.
INSTALLATION TIP
If the room floor is higher than the floor in the cut-out
opening, adjust the rear feet to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
1
Shorten the unit height in the front by adjusting the front
feet. This allows the unit to be gently tipped into the
opening. Readjust the front feet to level the unit after it is
correctly positioned in the opening.
1200 SERIES
INSTALLATION
LEVELING INFORMATION
1. Open the water supply valve in the main water source.
1. Use a level to
confirm the unit is
2. Plug in the power cord.
level. Level should
be placed along top
edge and side edge
3. Gently push the unit into position. Be careful not to
as shown.
kink the water supply line or entangle the power cord.
4. Re-check the leveling, from front to back and side to
side. Make any necessary adjustments. The unit’s top
1
surface should be approximately 1/8" (3 mm) below
the countertop.
5
QUICK START GUIDE
u-line.com
Control Operation
Not Alert
Light Power Used LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Press
and release to leave interior
Toggle lights
light on for 3 hours
When the “F” or “C” in the display is flashing, press
Adjust temperature
Press
or
and release
View temperature in unit
Press
and
together and release
Toggle between F/C
Hold
and
Glass door wine and beverage centers only.
or
for five seconds
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
First Use
All U-Line controls are preset at the factory. Initial startup
When plugged in, the unit will begin operating under the
requires no adjustments.
factory default settings. If the unit was turned off during
installation, simply press
and the unit will immediately
switch on. To turn the unit off, press
NOTICE
seconds and release.
U-Line recommends allowing the unit to run
overnight before loading with product.
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
6
and hold for 5
QUICK START GUIDE
u-line.com
Ice
During periods of limited use or high ambient
ICE MAKER OPERATION
Gently shake the bucket to break apart cubes. If not using
When the ice bucket is full, the ice making mechanism will
the ice maker regularly, empty the ice bucket periodically
shut off. However, the refrigeration system will continue
to ensure fresh cubes.
temperatures, it is common for cubes to fuse together.
to cool and maintain the ice supply.
It is normal for cubes to appear cloudy. The cause is air
trapped in the water because of fast freezing. It is not
NOTICE
caused by the health, taste or chemical make up of the
Do not place cans or bottles in the ice
water. It is the same air that is in every glass of water you
compartment because they will freeze.
drink.
Remove the ice bucket for emptying and cleaning. To
OFF
remove the ice bucket, raise the bin arm and remove the
bucket from the ice compartment. Use the ice bucket for
ice storage only.
ON
L
Sabbath Mode
To turn off ice production: Raise the bin arm into
1
an upright and locked position. The unit will preserve
2
3
4
5
6
temperature for ice storage.
NOTICE
This unit is Star-K certified and offers a Sabbath mode.
If not intending to use the ice maker, turn the
Sabbath mode disables system responses to user initiated
water supply valve off. It is also important to
activities and all external functions, including lighting,
raise the bin arm of the ice maker (see above).
display and audible alarms. The unit will still maintain
Failure to raise the bin arm may result in damage
internal temperatures and set points. View a full list of
to the water valve.
Star-K certified U-Line units at www.star-k.org.
Certain sounds are normal during the unit’s operation. You
To enable Sabbath Mode:
may hear the compressor or fan motor, the water valve,
or ice dropping into the ice bucket.
1. Press
(4) and hold for ten seconds and release (the
°F/°C symbol will flash briefly at the end of the ten
second period).
! CAUTION
NEVER use an ice pick, knife or other sharp
2. The interior light and control display (3) will go dark
instrument to separate cubes. Shake the ice
until user resets mode.
bucket instead.
7
QUICK START GUIDE
u-line.com
connection with the replacement of any defective part
3. NOTE: Although the display will not be visible, the
temperature controls in the unit remain active and
of the sealed system. All other charges, including
preserve the interior temperature.
transportation charges for replacements under this
warranty and labor costs not specifically covered by
this warranty, shall be the responsibility of the
4. Access the Ice Maker behind the freezer door and lift
purchaser. This warranty extends only to the original
the wire lever until it engages and remains in the lifted
purchaser of the U-Line product. The Product
position.
Registration Card included with the product should be
promptly completed by you and mailed back to U-Line
Sabbath Mode remains active until
(4) is quickly
or you can register on-line at www.u-lineservice.com.
pressed and released. Ice production will remain
suspended until the lever is placed back into its original
3. The warranty listed above does not apply to floor
(Lowered) position.
display models. The warranty for these models shall
be 30 days from the date of retail purchase and only if
U-Line’s Product Registration Card included with the
Warranty
unit is completed and mailed back or electronically
U-LINE CORPORATION LIMITED WARRANTY
apply to cosmetic damages. A proof of purchase may
1. U-Line Corporation (“U-Line”) warrants each U-Line
be required.
submitted to U-Line. This 30 day warranty does not
product to be free from defects in materials and
workmanship for a period of one year (two years on
4. The following conditions are excluded from this limited
Modular 3000 Series) from the date of purchase.
warranty: use of cleaners other than the recommended
U-Line further warrants the sealed system (consisting
stainless steel cleaners and U-Line Clear Ice Maker
of the compressor, condenser, evaporator, hot gas
cleaner; installation charges; damages caused by
bypass valve, dryer, and connecting tube) in each
disasters or acts of God, such as fire, floods, wind and
U-Line product to be free from defects in materials and
lightning; damages incurred or resulting from shipping,
workmanship for a period of five years from the date of
improper installation, unauthorized modification, or
purchase.
misuse/abuse of the product; customer education
calls; food loss and spoilage; door and water level
adjustments (except during the first 30 days from the
2. During the initial one year warranty period (two years
date of installation); defrosting the product; adjusting
on Modular 3000 Series) for all U-Line products U-Line
the controls; door reversal; and cleaning the
shall: (1) repair any product or replace any part of a
condenser.
product; and (2) for all Marine, RV and Domestic
U-Line products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line
5. U-Line products are designed to operate in ambient
shall be responsible for the labor costs performed by a
temperatures between 50°F and 100°F unless
U-Line authorized service company, incurred in
otherwise noted in the product manual. Exposure to
connection with the replacement of any defective part.
temperatures outside this range may cause
During years two through five of the warranty period
degradation of performance and issues such as lower
for the sealed system, U-Line shall: (1) at U-Line’s
ice production or spoiled contents that are not covered
option repair or replace any part of the sealed system;
under the terms of this warranty as a result of that
and (2) for all Marine, RV and Domestic U-Line
exposure. U-Line product may not be subjected to
products sold and serviced in the United States
temperatures below 40°F without following the
(including Alaska and Hawaii) and Canada, U-Line shall
winterization and vacation shutdown procedures in the
be responsible for the labor costs incurred in
user guide.
8
QUICK START GUIDE
u-line.com
Some states do not allow limitations on how long an
6. U-Line’s Outdoor Limited Warranty, set forth in this
Paragraph 6, shall apply to U-Line models deemed
implied warranty lasts or the exclusion or limitation of
suitable for outdoor use by Underwriters Laboratory
incidental or consequential damages, so the above
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
limitations may not apply to you. This warranty gives you
website and/or on the serial tag located inside the
specific legal rights, and you may also have other rights
product.
which vary from state to state.
A. Outdoor product may come into contact with rain by
Warranty 6/2014 Rev.G
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit
greater than 1/8" deep in water, hurricanes, splashing
of pool water, or directing a spray from a hose or
similar device into and around the unit.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify either
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
53223 USA or at +1.800.779.2547 or the dealer from
whom you purchased the product. In no event shall
such notification be received later than 30 days after
the expiration of the applicable warranty period. U-Line
may require that defective parts be returned, at your
expense, to U-Line’s factory in Milwaukee, Wisconsin,
for inspection. Any action by you for breach of
warranty must be commenced within one year after
the applicable warranty period.
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
ARE DISCLAIMED. U-Line’s sole liability and your
exclusive remedy under this warranty are set forth in
the paragraphs above. U-Line shall have no liability
whatsoever for any incidental, consequential or special
damages arising from the sale, use or installation of
the product or from any other cause whatsoever,
whether based on warranty (express or implied) or
otherwise based on contract, tort or any other theory
of liability.
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30423 8/2014 Rev.A
9