EZI 120, EZT 1011, EZT 100
EZI 120 Induction Coupler
Induction coupler for inductive audio transmission to a hearing aid with a telecoil (“T”) switch.
Suitable for connection to the RI 250 J, RI 100 J, or RI 250 S infra-red receiver.
Required cable for use with EZI 120, RI 250 J, or RI 250 S:
Monoaural cable, 3.5 mm plug
HZL 30-6
Binaural cable, 3.5 mm plug
HZL 32-6
Required cable for use with EZI 120 & RI 100 J:
Monaural cable, 2.5 mm plug
KA 100
Binaural cable, 2.5 mm plug
KAB 100
EZT 1011 Induction Neck Loop
Induction neck loop for use with the EK 2013 radio receiver or the RI250-J or RI 250 S
infrared receiver. It transmits the audio signal from the receiver to hearing aids with a
telecoil (“T“) switch.
Connector:
1/8" right-angled stereo jack plug
Cable length:
12"
Impedance:
32 Ω
EZT 100 Induction Neck Loop
Induction neck loop for use with the RI 100 J infrared receiver. It transmits the audio signal from
the receiver to hearing aids with a telecoil (“T“) switch.
Connector:
1/8" right-angled stereo jack plug
Sennheiser Electronic Corporation, 1 Enterprise Drive, Old Lyme, CT 06371
Telephone: 860-434-9190 • Fax: 860-434-1759 • Web: http://www.sennheiserusa.com
Sennheiser Mexico: Av. Xola 613, PH6, Col. Del Valle 03100, Mexico, DF. Telephone: (525) 639-0956. Fax: (525) 639-9482
Sennheiser Canada: 221 Labrosse Ave, Pte-Claire, PQ H9R 1A3. Telephone: 514-426-3013. Fax: 514-426-3953
Manufacturing Plant: Am Labor 1, 30900 Wedemark, Germany
">
