dedicated KVM switch and rackmount screen technology

User Manual

17” / 19” LCD 1152 x 900 Native Resolution

NS117 / NS119

1U LCD Console Drawer

Options :

- DC power

751

Designed and manufactured by Austin Hughes

UM-CV-751-NS117-Q215V1 www.austin-hughes.com

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■

Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■

Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■

When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■

When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■

Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■

If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■

Observe all precautions and warnings attached to the equipment.

■

If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■

Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fi re or electrical shock.

■

Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■

If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

■

Any product, on which the serial number has been defaced, modifi ed or removed.

■

Damage, deterioration or malfunction resulting from:

□

Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product.

□

Repair or attempted repair by anyone not authorized by us.

□

Any damage of the product due to shipment.

Removal or installation of the product.

□

Causes external to the product, such as electric power fl uctuation or failure.

Use of supplies or parts not meeting our specifi cations.

□

Normal wear and tear.

Any other causes which does not relate to a product defect.

■

Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■

Re-position or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-CV-751-NS117-Q215V1 www.austin-hughes.com

Contents

< Part. 1 >

NS117 / NS119

1.1

1.2

1.3

1.4

Package Content

Structure Diagram & Dimension

Installation

Connection

< Part. 2 >

Specifi cations / OSD

2.1

2.2

2.3

Product Specifi cations

Keyboard / Mouse Specifi cations

On-screen Display Operation ( OSD )

< Part. 3 >

Options

3.1

DC Power : 12V / 24V / 48V / 110 ~ 125V

P.1

P.1 - 2

P.3 - 4

P.5 - 6

P.7 - 8

P.9 - 10

P.11 - 12

P.13

UM-CV-751-NS117-Q215V1 www.austin-hughes.com

Contents

< Part. 4 >

KVM Integration

Matrix

Cat6 KVM www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM-KIT.pdf

Local Remote

1 1

1

1

1

1

1

2

1 3

0

0

1

2

0

8-port

-

-

-

-

-

16-port

-MUIP1613

-MUIP1624

-MU1602

-MU1603

-MU1604

32-port

-MUIP3213

-MUIP3224

-MU3202

-MU3203

-MU3204

Combo

Cat6 KVM

Matrix

DB-15 KVM

Local Remote

1 0

1 1

1 0 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM-KIT.pdf

1

0

0

8-port

-UIP802

-U802

-U801

16-port

-UIP1602

-U1602

-U1601

32-port

-UIP3202

-U3202

-U3201 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf

Local Remote

1 1

1

1

1

1

1

1

2

3

1

2

0

0

0

8-port

-MIP813

-MIP824

-M802

-M803

-M804

16-port

-MIP1613

-MIP1624

-M1602

-M1603

-M1604

32-port

-

-

-

-

-

Combo

DB-15 KVM

Local Remote

1 0

1 1

1 0 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf

1

0

0

8-port

-IP802

-802

-S801

16-port

-IP1602

-1602

-S1601

32-port

-

-

-

DVI-D

KVM www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM-KIT.pdf

Local Remote

1 0 0

12-port

-1201D

-

-

-

-

UM-CV-751-NS117-Q215V1 www.austin-hughes.com

Before Installation

■

It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■

Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■

To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■

When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■

Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.

■

Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■

Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

1 Disconnect the power cord.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.

UM-CV-751-NS117-Q215V1 www.austin-hughes.com

< Part 1 >

< 1.1 > Package Content

NS117 or NS119 unit X 1

- CX-6 6ft DVI-D console cable X 1

( Alternative : CB-6 6ft VGA console cable )

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

The above package content is only for the single console models.

It varies with options such as KVM & DC power.

< 1.2 > Structure Diagram

1

2

3

4

5

1

2

Carry handle to release the 2-pt lock

2-point lock

3

Installation Slides

4 LCD membrane

5

Membrane switch (KVM option)

6

7

8

9

LCD interchangeable module kit

Micro switch for screen auto power off

Keyboard interchangeable module kit

Mouse interchangeable module kit

8

9

6

7

< 1.2 > Dimension

Front View

Side View

Top View

NS117 / 119

UNIT : mm

1mm = 0.03937 inch

Model

NS117 series

NS119 series

Product Dimension

(W x D x H)

441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73"

441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73"

Packing Dimension

(W x D x H)

590 x 768 x 140 mm

23.2 x 30.2 x 5.5”

590 x 768 x 140 mm

23.2 x 30.2 x 5.5”

Net

Weight

12.3 kg

27.1 lb

12.5 kg

27.5 lb

Gross

Weight

16.5 kg

36 lb

17 kg

37.4 lb

The weight is only for the single console models. It varies with accessories & options such as KVM & DC power.

< 1.3 > Installation - How to install Installation Slides

Step

1

■

Insert the left and right rear mounting brackets into

the LCD console drawer.

Step

2

■

Measure the depth of the front and rear mounting rails.

■

Align each rear mounting bracket to a suitable length.

Step

3

Complete the installation

■

Fix the LCD console drawer into the rack.

M6 screw, cage nut & cup washer x 8 are provided.

< 1.3 > Installation- How to use the drawer

NS117 / 119

■

Pull the tab on the front handle and gently

slide out the drawer.

■

Flip up the LCD to a suitable angle.

■

Operate the LCD console drawer.

< 1.4 > Connection to USB Server via CX-6 cable

LCD Console Drawer

Power DVI-D KVM

CX-6 DVI-D console cable

USB DVI-D

USB server

< 1.4 > Connection to external KVM via CX-6 cable

LCD Console Drawer

Power DVI-D KVM

CX-6 DVI-D console cable

DVI-D USB

DVI console KVM

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.

< 1.4 > Connection to USB Server via CB-6 cable

LCD Console Drawer

Power KVM

CB-6 VGA console cable

USB VGA

USB server

NS117 / 119

< 1.4 > Connection to external KVM via CB-6 cable

LCD Console Drawer

Power KVM

CB-6 VGA console cable

USB VGA

USB console KVM

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.

< Part 2 >

< 2.1 > Product Specifi cations

LCD

Panel

Manufacturer

Panel Size ( diagonal )

Display pixel ( dots x lines )

Brightness ( typ. )

Contrast Ratio ( typ. )

Color

Viewing Angle ( L/R/U/D )

Response Time ( ms )

Dot pitch ( mm )

Display Area ( mm )

Surface treatment

Surface hardness

Backlight Type

MTBF ( hrs )

NS117 NS119

17-inch TFT color LCD

1280 x 1024 ( Direct )

1280 x 1024 ( Native )

250

1000:1

16.7 M

80/80/80/80

5

0.264

19-inch TFT color LCD

1152 x 900 ( Direct )

1280 x 1024 ( Native )

250

1000:1

16.7 M

85/85/80/80

5

0.294

337.92H x 270.33V 376.32H x 301.06V

Haze 25%, Hard-coating

3H

CCFL

50,000

3H

LED

30,000

Video

Connectivity

Digital

Analog

Plug & Play

Synchronization

HDMI

DVI

VGA

DVI / VGA

VGA

HDMI 1.1, CEA-861-D

DVI-D, TMDS single link

Analog 0.7Vp-p

VESA EDID structure 1.3

Separate, Composite & SOG

Audio

Connectivity

Audio Input

Audio Output

Connector 3.5mm stereo jack

Impedance / Power level 30kΩ / 750mV

Connector 3.5mm stereo jack

Speaker Output

Resistance / Power level 30kΩ / 2.8V

Power 2 x 2W

*When the audio output is connected, speaker output is OFF

Power Power Supply Range

Power Consumption Screen display ON

Power saving mode

Power button OFF

Auto-sensing 100 to 240VAC,

50 / 60Hz

25W or less

4W or less

1W or less

Regulatory Safety

Environmental cUL, FCC & CE certifi ed

RoHS2 & REACH compliant

Environmental

Conditions

Physical

Specifi cation

Applicable

Format

Operating

Storage

Temperature

Humidity

Temperature

Humidity

Shock

Vibration

NS117 / 119

0 to 55°C degree

20~90%, non-condensing

-5 to 60°C degree

5~90%, non-condensing

10G acceleration (11ms duration)

5~500Hz 1G RMS random

Product ( W x D x H )

Packing ( W x D x H )

Net Weight

Gross Weight

DVI-D / VGA Input PC Signal

NS117

441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73 inch

590 x 768 x 140 mm

23.2 x 30.2 x 5.5 inch

12.3 kgs / 27.1 lbs

16.5 kgs / 36 lbs

NS119

441.6 x 500 x 44 mm

17.4 x 19.7 x 1.73 inch

590 x 768 x 140 mm

23.2 x 30.2 x 5.5 inch

12.5 kgs / 27.5 lbs

17 kgs / 37.4 lbs

1152 x 900 x 66Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 760 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

< 2.2 > Keyboard / Mouse Specifi cations

Se

S keyboard integrated with touchpad

Sb

S keyboard integrated with trackball

Num Caps Scro ll Comp ose Num Caps Scro ll Comp ose

S keyboard integrated with touchpad / trackball

■

Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help

■

104 key notepad keyboard with full numerical pad and SUN function

■

USB interface

Key force

Travelling distance

Switch life

Software support

Supporting layouts

America

United States

55 ± 5g

3 ± 0.3mm

> 10 million life cycle time

MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC

Linux / Mac / SUN system

< 2.2 > Keyboard / Mouse Specifi cations

How to Use "S" Keyboard

NS117 / 119

Num LED in Off mode

Key pad behaves as a SUN Solar system administration command mode

Num LED in Green mode

Key pad behaves as a normal key pad mode

Audio / Display Keys

* Please ask your supplier for full details

F9

Audio : Mute

Display : Degauss

F11

Audio : Decrease volume

Display : Decrease contrast

F12

Audio : Increase volume

Display : Increase contrast

< 2.3 > On-screen Display Operation ( OSD )

Membrane Switch Function

Turn the monitor on or off

Display the OSD menu

Act as an Enter key to select screen setting options

Scroll through menu options and adjust the displayed control

Exit the OSD screen

Go back to the previous on-screen sub-menu or main menu

Remark : All LED touch buttons in WHITE light.

The LED of Power touch button will fl ash continuously when there is no signal input.

1

All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).

2

Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

< 2.3 > On-screen Display Operation ( OSD )

NS117 / 119

OSD Confi guration Page

Image: for the brightness, contrast, color temp, red, green, and blue

Geometry: for the auto adjust, H position, V position, phase and clock

Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio: for volume, bass, treble, balance, AVL and mute

Misc: for the language, OSD position, graphic mode, ratio, reset and timer

< Part 3 >

< 3.1 > Options : DC Power

Model

Input rating

Input voltage:

Input range:

Input current

- No load

- Full load

Output rating

Output voltage:

Output current:

Effi ciency

12V

12-Volt

9 ~ 18V

50 mA

4950 mA

12-Volt

4.16A

84%

24V

24-Volt

18 ~ 36V

50 mA

2450 mA

12-Volt

4.16A

85%

48V

48-Volt

36 ~ 75V

50 mA

1220 mA

12-Volt

4.16A

85%

DC power

KVM

***

For DC power option :

( 1 ) Option excludes 1 x power cord and 1 x AC power adapter.

( 2 ) Casing depth will be extended from 500mm ( 19.7” ) to 570mm ( 22.4” )

DVI-D

110 ~ 125V

110-Volt

66 ~ 160V

40 mA

993 mA

12-Volt

8.4A

92%

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.

Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.

UM-CV-751-NS117-Q215V1 www.austin-hughes.com