Cotek BP-1205 Specifications

Final Titel mobil EN.ai 1 16.04.13 10:41

2013/ 06.01

EN

CM

MY

CY

CMY

K

C

M

Y

What do humans need?

Self-sufficient energy supply

Energy storage from sun and wind

Accu-technology without any risk

MOBILE ENERGY

-AUTARKY-

Water

Air Food

Power to live

Home

TRUSTEC E-HYB

®

mobil

Vertrauen schafft Energie · trust creates energy ™

Trustec Energy Products

A Company participating in the renewable segment

2

OUR COMPANY

Our Scope of Activities:

Business Perspectives:

Business Perspectives:

Our company philosophy:

Manufacturing and delivery of topquality high-tech solar products through our regional TRUSTEC partners as well as local traders in the individual countries. Our goal is to boost the share of electrically transformed solar and wind energy

For the implementation of renewable power generation, TRUSTEC provides certain innovative state-of-the-art technologies that can be specially customized under consideration of any geological conditions prevailing in the different countries. Our TRUSTEC technology combines top-level quality with safe and sturdy construction, high efficiency and cost-effectiveness, all of which being enabled by our compre-

Our Portfolio:

Energy Storage provided through

the TRUSTEC-E-HYB range of

products

Solar technology that serves for

grid as well as for insular systems

Premium-quality grid and insular

inverters

TRUSTEC wind power technology

Wind / sun tracker for solar char -

ging spots in self-sustained power

supply stations.

hensive network of partners and sales agents. Our technology has been designed to be sustainable and environmentally friendly, aiming at self-sustaining power generation and gradually replacing fossil fuels even today.

Development of specific solar pow-

er generation and storage systems based on 25 years of experience in the field of both solar power and energy storage.

technologies, batteries, cables, plugs as well as windmills to supplement solar power generation.

Selection of qualified manufacturers (mainly from Europe), e.g. for

TRUSTEC grid inverters using the

PLATINUM-DIEHL/AKO Technology

(10 years of warrantee / optionally up to 20 years resp.) for the required technical components such as solar modules, assembly systems, monitoring

Establishment of a TRUSTEC partner sales and long-term service in many different countries

Further development within the field of future technologies, likewise covering future methods of energy storage such as hydrogen / carbon dioxide (= synthetic natural gas) and similar systems.

In order to secure investors’ interests,

TRUSTEC may publish the addresses of renowned manufacturers and forward original guarantees of aforementioned manufacturers to their customers.

In case of any warrantee or liability claims occurring, only the manufacturer or the product may be held liable, which is to the benefit of all parties involved, i.e. investors, sales partners and TRUSTEC as your supplier and power generation partner.

trustworthy technology for power generation,

Known from our slogan “TRUST creates Energy”

Vertrauen schafft Energie • trust creates energy ™

Delivery Scope mobile/ solar/ inverter

E-HYB „mobil“ - the smallest solar plant

230V AC + 12V DC directly from the sun mobil - with lithium-store cell up to 2,5 kWh

TRUSTEC Solar Moduls

12/ 27/ 55/ 60

Solar modules from Germany

+ far east production

TRUSTEC Power Accu

Starter/ Energy

Iron Lithium Phosphate Technology

TRUSTEC pure sine wave inverter

SK-series

Our trusty classic in the inverter marketplace


ST-series

Inverter with grid interconnection


SB-series

Combined inverter/ Battery charger/ grid interconnection

TRUSTEC battery charger

CX-series

Lead/ gel/ lithium with interface

TRUSTEC battery charger

BP & CK-series

Proven technology

LITHIUM

® page

4

6

8

10

12

14

16

18


3

TRUSTEC E-HYB mobil

A complete solar/ wind plant

E-HYB mobil -Energy from sun/ wind -found everywhere-

This compact, complete TRUSTEC E-HYB solar power generation system increases the lifestyle quality for those who need 230 V AC or 12 V DC from 720 Wh up to 2400 Wh.

E-HYB-mobil is made up of premium components such as: pure sine inverter

lithium-iron-yttrium-battery

charge control device

cell monitoring/ voltage & temperat.

deep discharge protection

display of battery capacity

charging current, current consump-

tion, inverter function

robust and sturdy ABS/PC-housing

(refer to page 14)

It provides the optimum solution for: small residental units all over the

world

also to be used for gardens, cars

and boats, for sales vehicles and

technical vehicles, too .

Sturdy construction: heat-resistant up to XX °C

splash-water resistant in the plastic

case

expected operating time up to 15

years (according to use)

The portable E-HYB-mobile units are up to now unparalleled on the world market.

They comprise the technology of a complete solar plant with wind power, charge controller, rechargeable battery, inverter as well as control techniques. Solar modules – or a small wind turbine - just need to be connected producing 230 V AC and 12 V DC everywhere in the world.

EASY AND SIMPLE ASSEMBLY INSTALLATION:

1. Arrange the solar panels to their requested positions.

2. Connect the cables of the modules to the “E-

HYB“.

3. The yttrium-lithium-iron-battery will be charged now.

4. Switch on the TRUSTEC-E-HYB -> Sinus inverter is working -> 230 V can be picked off.

This way the generated solar current will be free of charge for many years (230 V + 12V).

4


TRUSTEC E-HYB mobil

Technical details

technical details:

Typ

Solar Technology

Moduls 80 W mono (2-4 panels)

Maximum solar system Wp

Average daily output in Watt for system installed in DK / DE / GR / ZY / EGY daily output/ max. energy

Elevated modules

Rubber-protection for modules (round)

Charge Controller

M solar cable with connector

MC 4 + photovoltaic connector

Lithium battery:

Voltage V

Storage capacity (compared to lead gel batteries)

Charge-Cape-state-monitoring

Display A / V / cap /

Direct current - 12 V terminals

Photovoltaic charging terminals, max. V

Output protection

Grid charger - through supply unit A

Overload protection

Pure sine wave inverter output:

AC voltage

Rated/ Peak capacity

Wave type

Frequency

AC regulation

LED display

Input:

No-load current

Stand-By current A

Efficiency in &

Protection:

Low battery level - alarm:

Low battery level - shut down

Overvoltage

Overheating

Short circuit

Cooling

Ambience:

Working temperature °C

Operating humidity

Safety & EMC

Compliance with:

Meassurements (width x height x depth)

Weight

TEM 720/ 230 TEM 1200/ 230 TEM 2400/ 230

1

170

240/ 254/ 315/ 363/ 415

601/ 508/ 630/ 726/ 830

5

12

60

120

18

10

2

170

481/ 508/ 630/ 363/ 415

1202/ 1017/ 1260/ 1451/ 1660 yes yes yes

5 yes

12

100

200 yes yes yes

18 yes

10 yes

4

340

961/ 1017/ 1260/ 363/ 415

2404/ 2033/ 2519/ 2902/3320

10

12

200

18

15

400

230

700/ 1400

230

1000/ 2000

Sinus (THD < 3%)

50 / 60 Hz switchable by DIP switch

+/- 3%

Input voltage level

Output load level and error status

230

1500/ 3000

1.2

0,25

91%

1.40 on 12V/ 0.70 on 24V

0.28 on 12V/ 0.15 on 24V

90% bei 12V/ 93% on 24V

11

10.5

11/ 22

10.5/ 21

15.3

15.3/ 30.6

Switch-off output voltage - automatically switched on when temperature decreases

Switch-off output voltage, energy is switched on automatically

Load-controlled ventilator

450 x 400 x 250 mm

18 kg

0 -+ 40

20 - ca. 90% RH non condensing

ENS55022 class A

EN61000 3-2.3

EN60950 - 1

450 x 450 x 250 mm

25 kg

450 x 650 x 250 mm

30 kg


5

TRUSTEC FlExiBlE SOlAR MODUlE flexible

6

TRUSTEC flexible solar modules - 30/ 60/ 100/ 135W

TRUSTEC high-efficient, top-quality, flexible solar modules (max. 30°) for professional application in every vehicle-, boat- and roof types. For the reliable mobile energy supply.

Through the back-contact technique the cells can be coated with a flexible material thus producing high-efficient flexible PV-Modules.

These modules are suitable for:

slightly inclined surfaces

(max. 30°)

every vehicle-type (from Golf cars to camping vehicles)

every boat-type (from

sailing boats to Yacht)

Characteristics:

PV-module with max. 30°

bending

High-efficient cells with up to

21,5 % efficiency

up to 25 % higher yields than

conventional PV-module

extremely lightweight PV-modules max. recommended bending degree: 30°

Pm(W):

Voc(V):

Isc (A):

Vmp(V):

Imp(A):

Efficiency:

Module size (mm):

Cell-size (mm):

Junction box:

Cell-connections type:

Weight (kg):

HMB-30W

30W

21.2

1.83

17.6

1.70

19.6%

535 x 378 x 3

1/3 125 x 125

QC0911-1 with wire series connections, 32=4 x 8

0.49

HMB-60W

60W

21.0

3.84

17.5

3.43

19.6%

725 x 535 x 3

1/3 125 x 125

QC0911-2 with wire series connections 64=4x16

0.93

HMB 100W

100W

21.6

5.97

17.8

5.62

19.9%

1050 x 540 x 3/ 1175 x 540 x 3

4 x 8/ 4 x 9

QC0911-2 with wire series connection 36=4x9

1.35

HMB 135W

135W

29.5

5.82

24.9

5.45

20.00%

1435x540x3

125x125

QC0911-2 with wire series connection 44=4x11

2.00


TRUSTEC Mini-PV-Module flexible high power

TRUSTEC Mini-PV-Module - 30/ 60/ 100/ 135 W

These small PV-modules achieve the highest efficiency through the back-contact technique and reach a higher solar yield up to 25 %.

The plus- and minus-pole of the single cells is located on the back side, in this way the complete cell surface is available and can produce energy from the solar radiation.

Areas of application: general solar roof system off-grid system street lighting system.

Characteristics:

high-efficient cells

with up to 20 % efficiency

up to 25 % higher yield

than conventional PV-module

extremely lightweight PV-module

Pm(W):

Voc(V):

Isc (A):

Vmp(V):

Imp(A):

Efficiency:

Module size (mm):

Cell-size (mm):

Junction box:

Cell-connections type:

Weight (kg):

HMG-30W

30W

21.2

1.83

17.6

1.70

22.0%

535 x 378 x 30

1/3 125 x 125

JB007 without wire

2.2

HMG-60W

60W

21.0

3.84

17.5

3.43

19.6%

725 x 535 x 35

4x16

JB016 with wire series connections 64=4x16

5.7

HMG 100W

100W

21.6

5.97

17.8

5.62

19.9%

1050 x 540 x 35/ 1175 x 540 x 35

4 x 8/ 4 x 9

JB016 with wire series connection 36=4x9

7.6

HMG 135W

135W

29.5

5.82

24.9

5.45

20.00%

1435x540x35

125x125

JB016 with wire series connection 44=4x11

10.2


7

TRUSTEC SOlAR MODUlS

Centrosolar

TRUSTEC SOlAR-MODUlE - S-Serie 12/ 27/ 55/ 60

TRUSTEC Solar Modul of the Small Series of top quality for professional usage by German Manufacturer "Centrosolar". A reliable mobile power supply.

Solar modules with 36

high-performance solar cells

High performance also during

low irradiation and months with

diminished light

Salt spray corrosion tested accord.

to DIN EN ISO 9227-NSS

Ammonia resistant

Sturdy, seawater-resistant

aluminium frame

Frost resistant frame construction

Large, waterproof junction box

equipped with spring-type

terminals

Weather and water proof foil

provides highest life expectancy

even under extreme

climatic conditions

Made in Germany

certified according to DIN EN ISO

9001:2008 and ISO 14001:2009

up to 26 years performance

guarantee according to the

specific warranty terms of the

manufacturer

8

Technical details (STC)

Module-Typ

Performance class Wp

Voltage (Umpp) in V

Current (impp) in A

Open circuit voltage (Voc) in V

Short-circuit current (Isc) in A

Module efficiency in % system voltage in V

TK (Pmpp) in %/K

TK (Uoc) in %/K

TK (Isc) in %/K

NOCT in °C

Dimensions (WxDxH) in mm

Weight in kg

S240M36 Ultra mono

60

17,4

3,7

21,9

4

11,4

S325P36 Ultra poly

80

18

5

21,68

5,45

13,1

S405M36 Ultra mono

100

17,2

5,9

21,5

6,2

14,5

12

-0,45

-0,36

0,03

46 +/- 2

775x680x40

6,6

1070x680x40

8,6

1237x557x40

7,9


S560P36 Ultra poly

140

17,9

7,82

21,8

8,42

13,7

1500x680x40

12,1

SOlAR MPP-TRACKER fast tracking for a maximum performance

Solar MPP-TRACKER

The maximum power point tracking technology will boost the efficiency of your system. Inexpensive solar modules that were actually designed for power feed-in, may be used in these

12V/24V systems. Electronic protection

(polarization, over currents, short circuits, over temperature )High degree of efficiency – suitable for mounting on

Typ nominal voltage nominal battery charge current max.Modulinput voltage max. PV-power max.Battery load current max. eficiency consumption of auxiliaries noload „ temperaturcompensation cross section cable dimension weight operating temperature protection class

Solar Charge Controller top-hat rails - negative earthing. With innovative maximum-power-tracking technology, Phocos‘ MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions. The MPPT can yield an energy gain of up to 30% from your PV array (with the average gain being 10%-25%).

When a Central Unit is used, up to 16

MPPTs can be used together in one system. The charge regulation is then done via data bus by the Central Unit.

This will enable you to increase your system capacity substantially. The temperature-compensated three-stage

I-U curve charge regulation alogarithm significantly extends the lifespan of your battery. The possibility to use less expensive grid-feed-in solar-panels with up to 95V open circuit voltage

MPPT 100/30 MPPT 100/20

12V/24V autom. Cognition

30 A 20 A

95 V

450W 12V; 900 W 24V

33A

98,00%

<30mW bei 12VSystemvoltage (>2mA)

>80mW bei 24V Systemvoltage (>3mA)“

minus 4mV/cell *K

32 qmm

185 x 150 x 115 mm

1,6 kg

- 40°C up to +50°C

IP 22

300W 12V; 600W 24V

20A

97,00% key features overload protection discharge contactor informationsoptions

Safety other features

system voltage solar nominal load load current charge controlling

PWM battery load temperature compensation balance charging charge increase ventilated or sealed battery controlling operations

Battery deep discharge protection display battery and charger audible alarm manuel safety circuit breaker

Data control m.opt.PC connector

reserve palaity protection short circuit protection overheat control overvoltage protection overload protection current reserve

night light function external temper. Sensor

PCB coating system temperature max. cable

IP protection class certificate

TT-CM

12 V

4,0 A

None

Shunt x x x voltage

1 LED x no load

x without load x x

CE

TT-CA

12 V

5,8A

6,8 A

Serie x x x

voltage or SOC

3 LED x x x

TT-CML

12/24 V

5,8/10/15/20 A

5,8/10/15/20 A

Serie x x x by jumper voltage or SOC

only load

5 LED x x

electr. Fuse x x x

CE WeltBank x

-40 °C bis +50°C

16 qmm

IP 22

CE WeltBank

TT-CX

12/24 V

10/20/40 A

10/20/40 A

Serie x x x

by menue voltage x

Grafik LCD x x

USB x x x x x x x

CE

TT-PL

12/24/32/36/48 V

20/40/60 A

20,7/30 A

Serie o. Serie&Shunt

PWM or on/off

PreSet or user spez.





TT-CJS technical Details on request

Digital LCD

PV and load

RS232C x x x x x x x

32 qmm

CE


9

POWER ACCU

The stable Traction Battery

NEW

liTHiUM STORAGE BATTERiES light - compact - safe - high performance

Power Accu - The stable traction battery

TRUSTEC-Power-Accu "Traction"- Lithium-power supply as never before. Light, compact and reliable Lithium-Accu construction = up to 4 times more energy - "A very profitable long-term investment"

Iron Lithium Phosphate Technology

Very high operating and function safety

The advantages during engine-starting:

■ Small weight : ca 80% saving

■ Very compact: just 1/3 of the usual

size

■ Rapid charging capability: ca.

1h/1C

■ Charging by means of normal char-

ging devices e.g. Trustec-TCX-

series,also with dynamo

■ Ventilation not required

■ Higher discharge current up to 3C

continuously

■ Steady voltage curve

■ Lowest self-discharge: 10% per

year

■ Integrated battery manage system

■ Integrated melt fuse and cell balan-

cing

■ Data interface CANopen

■ Full Ah supply, even though with

higher power

■ Serial connection up to 1100V

permitted

■ Triggering for external protection

relay

■ Aluminium-plastic case

■ Contact connections: 2 x plus, 2 x

minus

■ Long lifecycle

10

Traction Batteries

Designation

TP-TR 12V3200E-AC

TP-TR 12V6400E-BC

TP-TR 12V10E-CC

TP-TR 12V19E-EC-SC

TP-TR 12V26E-FC-SC

TP-TR 12V32E-SC

Sy ste m

Balancing at 1 dis m ax char

A/W

. c on

) ge tin uo us pe rfo rm dis ch arg e p anc e (A uls c

/W

) urr en t/

12/158 28/370 po we r 1

No minal

3,2 V ( capa

Ah

/W h) cit y/

3,2 /42

CC C Ch

V t o 1 arge

4,4

me

V (

A) tho d

3,2 ope

(ch ra tin arg e) ( g te

°C

) m hig h/lo w s pe ra tora ge tur e

+60/-20

(dis ch tem arg hig pe e) ( h/lo rat w ope

°C

) ure ra tin g at 2 pe

0°C (

Hig rfo

Ah h r rm

/W h) ate d anc isc e ha rge we igh t (

Kg

)

+60/-20 2,88/38

Balancing 24/317 56/739 6,4 /84 6,4 +60/-20 +60/-20 5,76/76

Balancing

Balancing

Balancing

Balancing

36/475

72/950

96/1300

120/1600

84/1100

168/2200

224/3000

280/3700

9,6 /127

19,2/253

25,6/338

32/422

10

19

26

32

+60/-20

+60/-20

+60/-20

+60/-20

+60/-20

+60/-20

+60/-20

+60/-20

8,64/114

0,45

0,85

1,3 olu m m e

114x82x35

114x82x62

120x95x82

15,36/203 2,5 120x180x82/ 200x141x96

20,48/270 3,2 120x238x82/ 249x141x96

25,6/337 4,2 248x140x95

TPC-TR 12V50E-MC

TPC-TR 12V100E-NC

TPC-TR 12V160E-OC

BMS

BMS

BMS

150/2000

300/4000

480/6300

250/3300

500/6600

800/10500

50/660

100/1300

160/2100

50

100

160

+45/0

+45/0

+45/0

+60/-20

+60/-20

+60/-20

45/594

90/1188

144/1841

11

20

28

270x245x175

365x265x190

415x290x190


POWER ACCU performance

Power Accu Traction - performance

The temperature performance shows: 25 deg C, 160 A =

100%

0 deg C, 160 A = 88%

-20 deg C, 160A = ca.60%

Peukert Graphics discharge = 3C the voltage drops even with higher loads, but the capacity remains about the same. The voltage drops down in relation to the load and remains stable till the end at the same time.

Comparison of the performance between 320 Ah lead-acid battery and 160 Ah lithium-battery. during discharge with

600 Watt the lead- acid battery has a capacity of just ca.

160Ah = 1/2 of the nominal caopacity. As the lead-acid battery can be discharged just for the 50% the lithium- battery

160Ah Batterie can offer 4 times more the total capacity.

High number of cycles (bei 23%)

4 different charge-/ discharge curve at 80% discharge


11

Power Accu

The ultra light Starter Battery

Power Accu - The ultra light Starter Battery

TRUSTEC-Power-Accu "Start"- Lithium - great, unexpected, reliable power is contained in this new, light, durable, reliable and very compact battery. incredibly high starting power!

Iron Lithium Phosphate Technology

Very high operating and function safety

The advantages during engine-starting:

Smaller, lighter, more powerful and durable

The best starter battery

■ Sensational starting-power perfor-

mance Kg/A

■ Small weight : ca 80% saving

■ Very compact: just 1/3 of the usual

size

■ Rapid charging capability: ca.

1h/1C

■ Recharging after starting within ca.

5 minutes

■ Charging by means of dynamo

■ Steady voltage curve

■ Lowest self-discharge: 10% per

year

■ Full Ah supply, even though with

higher power

■ Vehicles 12V

–external protection relay-

■ Plastic case

■ Contact connections: 1 x plus,

1 x minus

■ Long lifecycle: more than 5 years

■ Extreme performance even with

extreme temperature

Ideal by engine starting for motorcycles, cars, jet-skis, snowmobiles,

ATVs, quads, micro-ultralight fliegers, sport airplanes (not certified)

12

Starter Batteries m oto

(c cm

) rcy cle s - e

Designation

TP-ST 12V2600P-AC ca ng ine s

450 r/ra ci ng

e ng ine s

Av iat io n

TP-ST 12V5200P-BC

TP-ST 12V7800P-CC

TP-ST 12V10P-DC

TP-ST 12V15P-EC

1000

1500

Harley 2 L

3 L

3 L TP-ST 12V15P-SC

TP-ST 12V20P-FC

TP-ST 12V20P-SC

TP-ST 12V25P-SC

4 L

4L

6 L di

(1 s ec sc ha

.)/p erf rg e p

. ( uls

c

A/W

) ur rent

150/1980 at 1

3,2 V ( di sc m ax ha

. c ont

A/W

) rg e inu

50/660 po we

No r 1

3,2 V ( ou s m inal

c ap

Ah

/W ac ity h)

/ fo r e nd ura cha rg ch arg e c ur e c nc e ( rent urr en

1C

)

2,6/34 t (

4C

)/ temp hig h/lo erat w o ure pe

(°C

) rat ing temp hig erat h/lo w s ure

(°C to rag

) e

10/3 -30/+60 -50/+60

Hig at 2

0°C ( pe rfo

Ah h r rman

/W ate d isc h) ce ha rg e

2,185/29 wei ght

(K g)

0,45 x x

300/3960

450/5940

600/7920

900/11880

900/11880

1200/15840

1200/15840

1500/19800

100/1320

150/1980

200/2640

300/3960

300/3960

400/5280

400/5280

500/6600

5,2/68

7,8/103

10/130

15/198

15/198

20/264

20/264

25/330

20/6

30/9

40/12

60/18

60/18

80/24

80/24

100/30

-30/+60

-30/+60

-30/+60

-30/+60

-30/+60

-30/+60

-30/+60

-30/+60

-50/+60

-50/+60

-50/+60

-50/+60

-50/+60

-50/+60

-50/+60

-50/+60

4,37/57

6,555/86

8,74/115

13,11/173

13,11/173

17,48/231

17,48/231

21,85/288

2,9

3,2

3,6

4,2

0,85

1,3

1,7

2,5

Vertrauen schafft Energie • trust creates energy ™ sm all v olu m m e

114x82x35

114x82x62

120x93x82

120x127x82

120x180x82

200x132x77

120x236x82

248x140x95

248x140x95

Power Accu

Accessories

Optimate Lithium Charger

OptiMateTM lithium, the first OptiMate to protect your LiFePO4 battery in a way no other charger did before! The new OptiMate lithium will protect your investment and guarantee your Lithium Iron Phosphate (LiFePO4 / LFP) battery will perform as advertised for a very long time. With 5 Amps of charge current available OptiMate lithium unique multi step ampmaticTM program recharges and balances cells within the battery quickly and efficiently. OptiMate lithium’s maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. OptiMate lithium – Battery Performance Guaranteed!

How it works

1. Pre-qualification test: OptiMate Lithium displays the condition of the battery before charging and measures environment temperature. The ampmaticTMcharge program is selected according to temperature and battery condition.

2. Low Volts recovery: The safeTo protection mode controls charging during this sensitive battery SAVE stage, to ensure that an over discharged battery will be correctly and safely recovered. Tests are conducted through-out the SAVE program to determine if the battery has successfully recovered and can advance to BULK CHARGE.

3. Bulk charge: the ampmaticTM processor actively adjusts charge current to match battery capacity and condition, achieving a complete charge in the shortest time. Progress is tracked against the ideal charge curve for LiFePO4 batteries.

4. Short-circuited / dead cell check: Charge progress is tracked against the ideal LiFePO4 charge curve, internal damage will be detected and unnecessary charging is prevented of a battery that cannot be recovered.

5. Absorption and equalisation: for 10 minutes the current is delivered in pulses with voltage controlled between 14,0 and 14,3V, aiding cell voltage equalisation and improving the battery's overall power delivery.

Recommended for

Programme control

Input current max.

Typical annual energy cost

Reverse drain current

Output current (bulk charge)

Automatic desulphation

Charge time limit

Maintain / test cycles

Charge retention test

Size

Weight

Enclosure classification

Mounting

Input cable length

Output cable length

All TRUSTEC TR/ TS batteries ampmaticTM microprocessor

0,55A @ 230V

< €1 (continuous maintenance) less than 0,001A

0,4A – 5,0A multistage (high voltage, turbo and pulsed mode)

24 hours (maintenance time: unlimited)

30 min/30 min (alternating hourly)

Range: 10,1 - 13,3V. GOOD (green) = battery voltage > 13,3V

199 x 71 x 61mm

740g

IP54 easy direct wall mounting

2m

2m

Included Accessories

Included Accessories

SAE-71 fused eyelet set, weather protected

SAE-74 clamps set for bench charging

Operation temperature range

6. Charge verification: the voltage is limited at 13,6V while the ampmaticTM processor monitors the current absorbed by the battery. If this reveals a less than optimal charge, the program reverts to absorption for a further 10 minutes.

7. Voltage retention test: is conducted for 30 minutes during which no charge current is delivered, with 5 possible test results indicating the battery's general state of health.

A green (voltage > 12,7V) result extends the test up to 12 hours, to check for excessive self discharge or higher than expected power loss through the vehicle’s electrical system.

-40°C / +40°C

8. Charge maintenance: The 12 hour MAINTENANCE

CHARGE CYCLE consists of 30 minute float charge periods at a voltage of 13,6V followed by and alternating with a 30 minute ‘rest’ (no charge current) periods. During the float charge period current is delivered only if the battery has lost charge due to connected vehicle circuitry. A refresh cycle may be performed if the charge level has dropped significantly.

TRUSTEC SB-DBD-250

TRUSTEC´s external under and overvoltage protector, to secure Power Accu tractions batteries against under- and overvoltage with the lowest possible stand-by current.

Boot

Before the BDB-250 becomes operational, it has to determine if a 12V or a 24V system is connected. This means that after connecting the BDB-250, the first thing it does is wait a second before doing anything else. After this, if the input voltage is above 10.0V below and

15.4V, the relay will close. If these conditions are not met, the relay will open.

High voltage

If the input voltage rises above 15.0V, the LED will start blinking to indicate a detected overvoltage. This will continue for 90 seconds after which the relay will be opened and the LED will turn off. When the voltage rises above

15.4V, the entire “warning” process will be skipped and the relay will switch off immediately. Low voltage If the input voltage drops below 10.0V, the LED will blink to indicate an under-voltage situation. This will continue for 90 seconds after which the relay will be opened and the LED will turn off.

RESET

When the BDB-250 is switched off and the voltage returns between 11.0V and 14.0V, there are two ways to re-activated it. If the user has chosen the automatic reset function, the relay of the BDB-250 will be activated directly after a “correct” voltage has been measured. However, when the manual reset function has been programmed, the user has to reset the BDB-250 by hand. This is done by pressing the build-in switch. If an external switch is connected to the remote input, this can also be used to reset it manually. The manner in which the BDB-250 will be reset is programmable by the user. The manner in which this is done can be found under “Programming”

Programming

The user can choose if the BDB-250 is reset manually of automatically. This is done by pressing the programming button and holding it down until the LED flashes. This indicates that the BDB-250 is in programming mode. At this point the button must be released. When the button is pressed once now, the automatic reset function is selected. If the user presses the button twice, the manual reset is selected. Approximately 4 seconds after the last time the button is pressed, the LED will blink to show the programmed reset function. (e.g.: If position 2 – manual reset – is selected, the LED will blink twice.)

SKU

Autodetect 12V

Autodetect 24V

Current consumption

Input surge current (100ms) 12V mode

8V to 20V

20V to 35V

2mA

2,6A

Input surge current (100ms) 24V mode

Switch current Continues

Switch current Peak

Dimensions WxHxD

Weight

5,0A

250A

1,500A

82x57x120 mm

370 g


13

TRUSTEC PURE SiNE WAVE iNVERTER

200 ~ 3000W

14

200 ~ 3000W Pure Sine Wave Inverter

TRUSTEC-Pure-Wave Inverter "the trusty classic inverter in the vehicles" proven technology from 350 to 3000 W - millions in use worlwide produced for TRUSTEC by Cotek

Features :

■

True sine wave output (THD <

3%)

■

Power ON-OFF remote control

■

Input and output fully isolation

■

Load control cooling fan

■

Advanced microprocessor

■

switch selectable

■

■

Output frequency 50/60 Hz e13 / CE / FCC approved

Output short circuit / overload /

over temperature protections

■

Tri-color indicators display input,

output level and failure status

■

Input polarity reverse / under

voltage / over voltage protec-

tions

H

J

I

D

A

E

G F

B C

200/350W 700W

A 6.5mm

-

B 7.75mm

-

C -

1000/1500W 2500/3000W

7mm 8.5mm

11.5mm

43.49mm

11.5mm

56mm

D 22.75mm 38.5mm 72/87mm 61.5/76.5mm

E 132mm 196mm 196mm

F 22.75mm 38.5mm 72/87mm

245mm

61.5/70.5mm

G 177.5mm 273mm 340/370mm 368/386mm

H 147mm 179mm 182/191mm 209mm

I 126.44mm 152mm 155/164mm 178mm

J 61.3mm

72mm 88.5mm

166mm



200 ~ 3000W

Model

Rated Output Power

Surge Power

AC Voltage

AC Waveform

AC Regulation

DC Input Voltage

Working Temp.

EMC & Safety

Standards

100/ 110/ 120 VAC

220/ 230/ 240

VAC

Packing

Warranty

Model

Output

Input

Model

Output

Input

SK200

200W

SK350

350W

SK700

700W

SK1000

1000W

Sk1500

1500W

SK2000

2000W

SK3000

3000W

400W 700W 1400W 2000W 3000W

100/ 110/ 120 VAC or 220/ 230/ 240 VAC

True sine wave (THD < 3%)

‚-3% ~ +5%

4000W 6000W

1.5kg; 6sets

11.5kg; Carton

3kg; 6 sets

22kg; Carton

12 VDC, 24VDC or 48 VDC

0 ~ + 40° C

UL458 (For SK 350, SK700, SK1000, and SK1500 in „GFCI“ Receptacles), Compliance to FCC Class A

Compliance to EN55022 Class A, Compliance to EN61000 – 3 – 2, 3, Compliance to EN60950-1

Compliance to e-13*72/ 245/ EEC, 95/ 94/ EC, CISPR 25 (2nd edition 2002), ISO 7637-2 : 2004

185x147x60 mm 296x180x72 mm 338x182x88 mm 415x191x88 mm 422x208x166 mm 452x208x166 mm

4kg; 4sets

20kg/ Carton

2 years

4.8 kg; 4sets

22.5kg/ Carton

8.85kg; 2sets

20.5kg/ Carton

10.2 kg; 2sets

23.2kg/ Carton

LED-Indictor

DC Voltage

Voltage Range

Efficiency (Typ.)

LED-Indictor

DC Voltage

Voltage Range

Efficiency (Typ.)

SK200/350-212

12VDC

10.5 ~ 15.0VDC

91%

SK200/ 350-224

Fault status (Red)

24VDC

21.0 ~ 30.0VDC

93%

SK200/350-248

48VDC

42.0 ~ 60.0VDC

94%

SK1500/2000-212 SK1500/2000-224 SK1500/2000-248

Input voltage level, output load level and fault status

12VDC 24VDC 48VDC

10.5 ~ 15.0VDC

90%

21.0 ~ 30.0VDC

93%

42.0 ~ 60.0VDC

94%

SK700/1000-212 SK700/1000-224 SK700/1000-248


12VDC

10.5 ~ 15.0VDC

91%

24VDC

21.0 ~ 30.0VDC

93%

48VDC

42.0 ~ 60.0VDC

94%

SK3000-212 SK3000-224 SK3000-248


12VDC 24VDC 48VDC

10.5 ~ 15.0VDC

90%

21.0 ~ 30.0VDC

93%

42.0 ~ 60.0VDC

94%

Power inverter Remote Control

This user friendly remote control is easy to understand and set - up

Model No.

CR-5

CR-6

CR-8

Length

10‘/ 25‘/ 50‘

10‘/ 25‘/ 50‘

10‘/ 25‘/ 50‘

Dimensions (WxL) mm

53.5 x 70.0

130.0 x 120.0

53.5 . 70.0

Application

S1500 Series

SK Series, ST Series (except ST600), SD Series

SK Series, ST Series, SD Series, SE350


15


200 ~ 3000W

16

200 ~ 3000W Pure Sine Wave Inverter

TRUSTEC-Pure-Wave Inverter "with reliable transfer switch" reliable technology from 600 to 2500 W produced for TRUSTEC by Cotek

Features :

■

True sine wave output (THD <

3%)

■

Power ON-OFF remote control

■

Input and output fully isolation

■

Load control cooling fan

■

Advanced microprocessor

■

Built-in transfer switch and AC

circuit breaker

Mechanical Specification:

■

ROF(remote override function) or

ignition lockout function option

■

e13 / CE / FCC approved

■

Speed up transfer time and syn

chronized operation with utility

AC source

■

Output short circuit / overload /

over temperature protections

■

Tri-color indicators display input,

output level and failure status

Input polarity reverse / under

voltage / over voltage protec-

tions

600W 1000W

A 290mm 373mm

1500W

403mm

2000W

433mm

2500W

463mm

B 179mm 236mm 332mm 332mm 332mm

C 80.9mm 115.8mm 115.8mm 118.65mm 118.65mm

600W 1000W 1500W

D 154.5mm 206mm 206mm

E 47mm

F 196mm

2000W

302mm

2500W

302mm

88.5mm 103.5mm 118.5mm 133.5mm

196mm 196mm 196mm 196mm



200 ~ 3000W

Model

Rated Output Power

Surge Power

AC Voltage

AC Waveform

DC Input Voltage

Power Saving Setting

LCDE Indicator

Working Temp.

EMC & Safety Standards

Packing

Warranty

Model

Output

Input

Voltage

Transfer switch

No Load Current Draw

DC Voltage

Voltage Range

Efficiency (Typ.)

Model

Output

Input

Voltage

Transfer switch


DC Voltage

Voltage Range

Efficiency (Typ.)

Model

Output

Input

Voltage

Transfer switch


DC Voltage

Voltage Range

Efficiency (Typ.)

ST600

600W

2050W

No

ST1000

1000W

2000W

ST1500

1500W

3000W

100/ 110/ 120 VAC or 220/ 230/ 240 VAC

ST2000

2000W

4000W

Pure sine wave (THD < 3%)

12 VDC, 24VDC or 48 VDC

20 ~ 110W


40 ~ 220W

ST2500

2500W

5000W

3.3kg; 4sets

15kg/ Carton

0 ~ + 40° C

Meet UL458, Compliance to FCC Class A

Compliance to EN6100-3-2, 3/ Compliance to EN60950-1, Compliance to EN55022 Class A

Compliance to e-13*72/ 245/ EEC, 95/ 54/ EC, CISPR 25 (2nd edition 2002), ISO 7637-2 : 2004

290x179x80 mm 373x236x115 mm 403x236x115 mm 433x332x115 mm

6.2kg; 2sets

14kg/ Carton

7.0kg; 2sets

15kg/ Carton

2 years

11.2kg; 1set

13kg/ Carton

12kg; 1 set

14kg/ Carton

ST600-212

0.83 A

12VDC

10.5 ~ 15.0VDC

91%

ST600-224

220/ 230/ 240V +/- 3%

12 Amp

0.43 A

24VDC

21.0 ~ 30.0VDC

93%

ST600-248

0.22 A

48VDC

42.0 ~ 60.0VDC

94%

ST1500-212

1.40 A

12VDC

10.5 ~ 15.0VDC

92%

ST1500-224

220/ 230/ 240V +/- 3%

16 Amp

0.70 A

24VDC

21.0 ~ 30.0VDC

93%

ST1500-248

0.40 A

48VDC

42.0 ~ 60.0VDC

94%

ST3000-212

2.32 A

12VDC

10.5 ~ 15.0VDC

90%

ST3000-224

220/ 230/ 240V +/- 3%

15 Amp

1.15 A

24VDC

21.0 ~ 30.0VDC

93%

ST3000-248

0.68 A

48VDC

42.0 ~ 60.0VDC

94%

ST1000-212

1.25 A

12VDC

10.5 ~ 15.0VDC

90%

ST1000-224

220/ 230/ 240V +/- 3%

25 Amp

0.65 A

24VDC

21.0 ~ 30.0VDC

93%

ST1000-248

0.35 A

48VDC

42.0 ~ 60.0VDC

94%

ST2000-212

2.30 A

12VDC

10.5 ~ 15.0VDC

90%

ST2000-224

220/ 230/ 240V +/- 3%

15 Amp

1.10 A

24VDC

21.0 ~ 30.0VDC

93%

ST2000-248

0.65 A

48VDC

42.0 ~ 60.0VDC

94%


17

PURE SiNE WAVE iNVERTER

2500 ~ 3500W

18

Pure sine wave inverter - scalable

TRUSTEC-Pure-Wave Inverter "with reliable transfer switch" reliable technology from 2500 to 3500 W produced for TRUSTEC by Cotek

Features :

■ Parallel redundancy design for

power expansion

■ User-friendly LCM Module

■ Automatic master mechanism to

eliminate single point failure and

optimize reliability

■ Built-in ATS and AC circuit breaker

■ RS-232 and CAN BUS

communication

■ Input & output fully isolation

■ Output voltage / power saving mode

selectable

■ Input Protection: Reverse Polarity

Fuse/ Under Voltage / Over Voltage

Protection

■ Output Protection: Short Circuit/

Overload/ Over Temperature/

Over Voltage Protection

■ Built-in Ethernet function

■ High-Tech - robust - inexpensive

■ Ideal combination with TRUSTEC

CX-charger

(15~80A/ 12-24 V)

2500W 3500W

A 240mm 240mm

B 95.6mm 125.6mm

C 100.4mm 130.4mm

D 8.5mm

8.5mm

E 11.5mm

11.5mm

F 283.1mm 283.1mm

G 128.4mm 128.4mm

H 255.4mm 255.4mm


REiN SiNE WAVE iNVERTER

2500 ~ 3500W

Output

Input

Model

Rated Power

Surge Power

Waveform

Efficiency (full load @ rated VDC)

Output voltage (@rated VDC)

Output frequency

Total Harmonic Distortion (THD)

DC Voltage

Voltage Range

Power Consumption @ Save Mode

Power Consumption @ No Load Mode

BAT. Low Alarm Protection

BAT. Low Shutdown

BAT. Low Restart

BAT. High Alarm

BAT. High Shutdown

BAT. High Restart

Input Protection

Output Protection

DC Input Reverse Polarity

Environment Working Temperature

Storage Temperature

Relative Humidity

Safety & EMC Safety Standards

Control &

Signal other

EMC Standards

LED Indicator

LCM (Optional)

Dimensions (W x H x D)

Weight

Cooling

Communication Port

Application

SD2500-212

88,00%

12 VDC

10.0~16.0 VDC

1.1 A

< 3.6 A

10.5 VDC

10.0 VDC

12.5 VDC

15.5 VDC

16.0 VDC

15.0 VDC

SD2500-224

2500 W

4000 W

SD2500-248 SD3500-212

88,00%

True Sine Wave

90,00% 90,00%

200/ 220/ 230/ 240 VAC ± 3%

50/ 60Hz ± 0.1%

24 VDC

< 3% (@ rated/ VDC, linear load)

48 VDC 12 VDC

20.0~32.0 VDC

0.7 A

< 1.9 A

21.0 VDC

20.0 VDC

25.0 VDC

31.0 VDC

32.0 VDC

40.0~64.0 VDC

0.4 A

< 1.0 A

42.0 VDC

40.0 VDC

50.0 VDC

62.0 VDC

64.0 VDC

10.0~16.0 VDC

1.4 A

< 2.5 A

10.5 VDC

10.0 VDC

12.5 VDC

15.5 VDC

16.0 VDC

SD3500-224

3500 W

6000 W

91,00%

24 VDC

20.0~32.0 VDC

0.5 A

< 1.35 A

21.0 VDC

20.0 VDC

25.0 VDC

31.0 VDC

32.0 VDC

30.0 VDC 60.0 VDC 15.0 VDC 30.0 VDC

Reverse Polarity (Fuse)/ Under Voltage/ Over Voltage Protection

Short Circuit/ Overload/ Over Temperature/ Over Voltage Protection

By Fuse

-20°C ~ +60°C

-30°C ~ +70°C

Max. 90% non condersing

Certified EN 61558-1, EN 61558-2-16

Certified EN 55014, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2,3,4,5,6,11

Input voltage level, output load level and faulty status

2 x 16 LCM controll panel

283.1 x 128.4 x 436 mm 283.1 x 128.4 x 496 mm

8 kg 10 kg

SD3500-248

91,00%

48 VDC

40.0~64.0 VDC

0.5 A

< 0.75 A

42.0 VDC

40.0 VDC

50.0 VDC

62.0 VDC

64.0 VDC

60.0 VDC

Load & Thermal control fan

CAN BUS (RJ45), RS 232 (RJ11 type connector)

Home and Office appliances, Portable Power Equipment, Vehicle, Yacht and Off-Grid Solar power systems...etc.


19

TRUSTEC ADVANCED BATTERY CHARGER

20

Advanced inverter battery charger

TRUSTEC-Pure-Wave Combi-Inverter/ Accu-charger SB "with transfer switch"

New technology 2000 W produced for TRUSTEC by Cotek

Features :

■ DA microprocessor controls self-

diagnosis and operation

■ User-friendly LCM Module

■ Can parallel with the utility AC to

generate up to 4 KW

■ Battery charger current 100A Max.

@12VDC / 50A Max. @24VDC

Provide 5A Max. second charger

■ Provide 5A Max. second charger

■ Built-in 25A rated bypass switch

A

■ Power sharing function between

charger and load

■ Fan failure alarm with buzzer

■ DIP switch and remote control

management

■ RS-232 and CAN BUS

communication

■ Dry contact for system alarm

■ DC Input Protection: Reverse

Polarity Fuse/ Under Voltage /

Over Voltage Protection

B

■ AC Input Protection: Short circuit /

Under Voltage / Over Voltage

Protection

■ AC Output Protection:

Short Circuit / Overload /

Over Temperature Protection

2000W

A 30mm

B 13mm

C 79.7mm

D 300mm

E 85.1mm

F 464.8mm

G 331mm

H 295.3mm

I 155.8mm

G H

I C

D

F

E


TRUSTEC ADVANCED BATTERY CHARGER

Model

AC Input

Characteristic

DC Output

Characteristic

Bypass Relay

Operating

Temperature

Range

Operating Humidity Range

Fan Operation

And Indicator

Power Sharing

Function

Ground Relay

Safety and EMS

Mechanical

Specification

SB2000-212 SB2000-224

Nominal Voltage/ Frequency

Input Voltage Range

Input Frequency Range

Nominal Current

Efficiency (Full Load)

Power Factor Correction (PFC)

Charging Current Range

Second Charger Output

230 VAC / 50 HZ

180 ~ 260 VAC

47 ~ 63 Hz

7.4 A (@ 230 VAC)

> 87%

> 0.98 (40% Load)

Max. Output Voltage

Battery Temperature Compensation

Bulk Voltage

Absorption Voltage

Float Voltage

LCD Panel

Remote Control Terminal

20 ~ 100 A

5 A, 3-Stage

Battery Chargers

10 ~ 50 A

2.5 A, 3-Stage

Battery Chargers

14.8 VDC

-25mV per°C

14.4 V

14.25 V

29.6 VDC

-50mV per°C

28.8 V

28.5 V

27 V 13.5 V

Charger Voltage @Battery Type Setting „Standard“, temperature at 25° C

2 Lines LCD Panel with keypad for navigation and red/ orange/ green LED

Controls the inverter ON/ OFF operation

Dry Contact Terminal

Relay Specification

Full Load

Power De-rating

Storage

By a relay

25 Amp/ 250 VAC

-25 ~ 40°C

50W / °C, 41 ~ 60°C

-30 ~ 70°C

0~93% non-condensing

Failure Indication

Switchen On/ Off

Buzzer alarm

The fan does operate in load and internal temperature control related PWM variable speed controll

Inverter Mode/ Charger mode/ Power sharing (Generator mains support function/ Power support)/ Charger Sharing

Ground relay included for Connection of neutral of inverter to ground only at inverter mode. Standard disable

Safety Standards Meet EN60950-1

EMS Standards FCC Class A EN55022:1998+A1:2000+A2:2003 Class A

EN55024:1997+A1:2001+A2:2003

EN61000-3-2:2006 Class A

EN61000-3-3:1995+A1:2001

Dimension

Weight

465x331x156 mm / 18.31x13.03x6.14 inch

10.5 Kg (23.1 Lbs)


21

ADVANCED BATTERY CHARGER

22

Advanced Battery Charger

TRUSTEC-Battery-Charger CX "Superlative functionality" newest technology from 15 to 80 A / 12/24 V - programmable - lead/gel/AGM/lithium produced for TRUSTEC by Cotek

Features :

■

Universal AC input with

active PFC

■

Adjustable charging voltage

& time setting capability for

each charging stage

■

Compatible with lead adcid,

Li-ion, Gel and AGM batteries

■

interface

■

compensation

■

■

■

RS232 communications

Voltage/ temperature

2 stage fan speed control

Output power OK signal

High efficiency and

high reliability

■

■

■

■

Built-in battery rescue function

Built-in Engine Start Battery

(ESB) output function

Protection Short Circuit/ Over

Voltage/ Over Temperature/

Brown-out Protection

Withstand 2G vibration test

Note 1. All parameter not specially mentioned are measured at 230 VAC input, rated load and 25 of ambient temperature.

2. The Charger is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

3. Before charging, make sure the battery charger and battery specifications are compatible.

4. When use sleep mode, please refer to charging current v.s. Heat sink temperature de-rating curve.

1250/2425 1280/2440 1215/25/15 1235

A 272.4mm 312.4mm 243.4mm 263.4mm

B 213mm 213mm 183mm

C 76.5mm 76.5mm 72mm

183mm

72mm

B

C

A


ADVANCED BATTERY CHARGER

Modell

Output

Input

Protection

Function

Environment

Safety

&

EMC

Other

Battery Type

Boost Charge Voltage

Float Charge Voltage

Main Rated Current

Current Range

Main Output

ESB Output

ESB Output/Voltage/ Current

Battery Charging Mode

Single Output Current Limit

Voltage Range

Power Factor (Typ.)

Frequency Range

Efficiency Range

Efficiency (Typ.) at 230Vac

AC Current (Typ.)

Leakage Current

Short Circuit

Over Voltage

Over Temperature

Battery Over Temperature

Alarm Signal

Communication

Temperature Compensation

Charging Sleep Mode

Remote Control

Working Temp.

Working Humidity

Storage Temp., Humidity

Temp. Coefficient

Vibration

Safety Standards

Withstand Voltage

Isolation Resistance

EMI Conduction & Radiation

Harmonic Current

EMS Immunity

Dimensions (WxHxD mm)

Packing

CX1215

15A

0-15A

CX1225

25A

0-25A

CX1235

14.4V/ 14.7 V

13.80V

35A

0-35A

CX1250 CX1280

Lead Acid/ Li-ion/ Gel/ AGM

50A

0-50A

80A

0-80A

CX2415

12.5A

0-12.5A

CX2425

28.8V/ 29.4 V

27.60V

25A

0-25A

CX2440

40A

0-40A

15A

13.8V/ 2A

25A 35A

-

-

3-Stage charging capability

40A 40A

90-264Vac

-

-

PF>0.92 at full load

47-63Hz

12.5 A 25A 40A

2.5A/

100Vac

1.07/ 240Vac

4.1A/

100VAC

1.8A/

240Vac

6.2A/

100Vac

2.8A/

240Vac

8.24A/

100Vac

3.6A/

240Vac

13.3A/

100Vac

5.4A/

240Vac

4.2A/

100Vac

1.7/

240Vac

8.3A/

100VAC

3.6A/

240Vac

For earth < 1mA/ 240Vac

Current is reduced to < 1A coninued 30sec., fan will operate 30seconds then turn off

13.3A/

100Vac

5.4A/

240Vac

17.5V ± 1% 35V ± 1%

Protection type: Shut down output (recovery after resetting AC power on)

100 ± 5°C detected by heat sink

Protection type: shut down output (recovery after heat sink temperature goes down to 50° C)

52 ± 5°C (optional device – temperature sensor)

NC./ NO. Relay contact output

RS232 Communication protocol

-10mV/ 0.5°C provided by optional device - Cotek temperature sensor -20mV/ 0.5°C provided by optional device -

Cotek temperature sensor

By remote control and DIP switch (low noise mode)

3 colour LED and botton for ON/ OFF and Sleep mode control

-20°C - 50°C (refer to output load de-rating curve)

20 – 90% RH non-condensing

-40°C - +85°C, 20-90% RH

± 0.03% (0°-50°C)

179x63x238

1.6kg

1,7 kg

10-500Hz, 2G 10min./ 1 cycle period for 60min. Each along X, Y, Z axes

Certified EN 60335-1, EN 60335-2-29

I/ P-O/P: 4242 VDC, I/P-FG: 1768 VDC, O/P-FG: 700VDC

I/ P-O/P: 100M Ohms/ 500VDC

179x63x238

EN55022

EN61000-3-2; EN 61000-3-3

EN 61000-4-2,3,4,5,6,8,11; ENV 50204

179x63x274 208.5x75x

283

208.5x75x

303

179x63x238

1.9kg

3.1kg

4.0 kg 1.6 kg

208.5x75x

283

2.9 kg

208x75x303

3.9 kg

23


3-STEP BATTERY CHARGER

144W 3-Step Battery Charger

TRUSTEC-Battery-Charger BP "Small battery charger" proven 3 step-charging technology for lead/gel battery produced for TRUSTEC by Cotek

Features :

■

Universal AC input with active

PFC

■

High - performance 3 - step char-

ging effect

Battery charging curve

IUoU Charging Characteristic

■

control circuit

■

■

Advanced 8 bit microprocessor

Reverse battery protected by fuse

Ignition protection

■

Over power protection

lED Status

■

Easy to read LED´s for system

status

■

Compact size, light weight

■

Output short circuit protection

LED Signal Charging Status

Bulk charge

Absorption charge

Floating charge

Charging failure

LED Indiction

Fast green blink

Slow green blink

Solid green red blink

Model

AC Voltage Range

AC Frequency Range

AC Current (Max.)

AC Inrush Current (Typ.)

Over Load

Over Temp.

Working Temp.

Withstand Voltage


24

Dimmension

Packing

Warranty

BP-1210 BP-1205 A BP-2405 A

85 ~ 264 VAC | 125 ~ 373 VDC

47 ~ 63 Hz

1.9 A/ 90 VAC, 0.95 A/ 180 VAC

BP-2403 A

Cold Start 30 A / 230 VAC

102 ~ 110% rated output power

Protection type: Constant current limiting, Hiccup mode, recovers automatically after fault condition is removed

85°C + 5°C (TH1) detect on heat sink

-20°C ~ +50°C (Refer to output load de-rating curve)

-20°C ~ +50°C (Siehe Ausgangslast Deratingkurve)

I/P – O/P: 3KVAC, I/P – FG: 1.5KVAC, O/P – FG: 0.5KVAC, 1 minute

EN55022 : 2006 Class B

EN61000-3-2:2006; EN61000-3-3:1995+A1:2001+A2:2005; EN55024:1998+A1:2001+A2:2003

IEC61000-4-2 Edition 1.2 : 2001 -04; IEC61000 -4 -4 : 2004

IEC61000-4-5 Edition 1.1 : 2001 -04; IEC61000 –4 -6 : 2004 Edition 2.1 : 2004 -11

IEC61000 -4 -8 Edition 1.1 : 2001 -03; IEC61000 -4 -11 : 2004 Second Edition : 2004 -03

210 x 85 x 50 mm / 8.26 x 3.34 x 1.96 inch

1.0kg / 2.2 Lbs

2 years


4-STEP BATTERY CHARGER

220W 4 - Stufen Ladegerät

Features :

■

Green design, No-load power consumption < 1W

■

Universal AC input with active PFC

■

Advanced 8 bit microprocessor control circuit

■

Reverse polarity protected by electronic circuit

■

Intelligent output detective protection

■

Protections: OVP, OLP, OTP, SCP

■

Easy to read LED´s for system status

Model

AC Voltage Range

AC Frequency Range

AC Current (max.)

AC Inrush Current (Typ.)

Over Load

Over Temp.

Working Temp.

Withstand Voltage

Dimension

Weight

Warranty output

Input orange green red


Model

VA

VB

VC

IA

IB

CK-1215

12V/ 15A

14.4 V

13.6 V

13.2 V

15.0 A

2.25 A

CK-2408

12V/ 7.5

28.8 V

27.2 V

26.4 V

7.5 A

1.12 A

Model

LED Indiction

DC Voltage range

Rated Current

Current Range

Efficiency (Typ.)

Fast Blink

Slow Blink

Solid

Solid

Blink solid slow Blink

CK-1215

14.4 V

15 A

0 ~ 15 A

83,00%

LED Signal

CK-1215 CK-2408

100 ~ 264 VAC

47 ~ 63 Hz

2.95A/ 100VAC/ 1.52A/ 240 AC

Cold Start 80A/ 230 VAC

100% +/-5% rated output current

Protection type: Constant current limiting

65°C +5°C (N3) detect on heat sink

Protection type: Output voltage disable, recovers automatically after temperature goes down

-20°C ~ +50°C (Refer to output load de-rating curve)

I/P – O/P: 4242 VDC, I/P – FG: 2121 VDC, O/P – FG: 707VDC, 1 minute

EN60335 -2 -29

EN55022 : 2006 Class B

EN61000 -3 -2 : 2006

EN55024, EN61000 -4 -2, 3, 4, 5, 6, 8, 11

220x85x50mm/ 8.67x3.34x1.96 inch

1.2kg/ 2.6 Lbs

2 years

CK-2408

28.8 V

7.5 A

0 ~ 7.5 A

86,00%

Charging Status

Bulk charge

Absorption charge

Floating charge

Storage charge

Wire disconnection

Charging Failure/ OVP/ UVP

OTP


25

Product range

Storage/ Off-Grid/ inverter

Final Titel Speicher EN.ai 1 16.04.13 10:42 Final Titel solar EN.ai 1 16.04.13 13:34

CMY

K

MY

CY

Y

CM

C

M





Very reliable energy autarky and feeding

ENERGY STORAGE SYSTEM

CMY

K

MY

CY

Y

CM

C

M





SOLAR TECHNOLOGY

AND AUTARKY

Sets and components

Water

Air Food

Power to live

Home


Y B

Water

Air Food

Power to live

Home

TRUSTEC solar-tech


Solar energy storage technology to full self-sufficiency

Solar Off-Grid storage technology

High-tech solar inverter

- Diehl-technology -

for home, commercial and

industrial of 2.5 kWh to MWh solar power self-marketing

power stabilization for network

providers

Off-Grid Storage Systems solar inverters, batteries and

Off-grid systems components

solar tracker & moduls single phase three-phase

for all solar installations from

2 kW to MW

or visit our website: www.trustec-energy.eu

TRUSTEC Energy GmbH

Electrotechnical Energy Products

D-91522 Ansbach · Technologiepark 20

Telefon +49(0)981 48 74 49 - 00

Fax +49(0)981 48 74 49 - 29

E-Mail: [email protected] www.TRUSTEC-energy.eu

TRUSTEC sales partner:

Vertrauen schafft Energie · trust creates energy TM

All technical data may be modified any time without prior notice. No liability can be taken over for possible printing, translating or further transmission errors.

No results