Powertech ZM9158 100W 12V Semi Flexible Solar Panel User manual

100W 12V Semi-Flexible Solar Panel with DF Technology

User Manual

ZM9158

Thank you for choosing this product.

This 100W solar panel is highly efficient, lightweight and versatile.

The operation guidance aims to give you a look at how this product could be used. More research is always recommended so that you can create your own solar power system that exactly meets your needs.

Operation Guidance:

Step 1: Select a site to mount the solar panel. It is advised to install solar panel in a shadefree location that has sunlight most of the day.

Step 2: Mount and secure the panel. There are many ways to do this but what is most important is to ensure that sunlight to the solar cells is not blocked. The simplest way is to fix panel with hooks or rope via the pre-drilled mounting holes.

Step 3: Set up your solar panel system and connect everything. The picture below provides one example.

PMW Charger Cotroller

100W Solar Panel

12V Power Inverter

12V Deep Cycle

Battery

Tips:

1. It is NOT recommended to connect more than 6 solar panels in series or in parallel.

2. We have tested that the panel can be safely curved up to 30 degrees’ maximum. Please handle the solar panel with care and avoid over-bending it on a bumpy surface, as this may result in damage to the product.

3. Loss of efficiency (over time) is not considered a defect. It is considered normal for the efficiency of solar panel to degrade a small amount every year. External factors such as local solar intensity, shading, soiling, snow and ambient temperature all could also influence the performance of the panel.

Warning:

1. This module produces electricity when exposed to light. Please follow all applicable electrical safety precautions.

2. Only qualified personnel should install or perform maintenance work on these modules.

3. Be aware that dangerously high DC voltages can occur when connecting multiple modules in series.

4. Do not damage or scratch the rear surface of the module.

Product Specifications:

Solar Cell:

Max. Power (Pmax):

Open Circuit Voltage (Voc):

Short Circuit Current (Lsc):

Max. Working Voltage (Vmp):

Max. Working Current (Imp):

Max. System Power:

Standard Test Condition:

Operating Temperature:

Dimensions:

Monocrystalline

100W (±5%)

20.5V

7.1A

18V

5.89A

600 ~ 900W

AM1.5, 1000W/m2, 25°C

-40°C ~ +85°C

690(W) x 940(H) x 2.5(D)mm

Distributed by:

TechBrands by Electus Distribution Pty. Ltd.

320 Victoria Rd, Rydalmere

NSW 2116 Australia

Ph: 1300 738 555

Int’l: +61 2 8832 3200

Fax: 1300 738 500 www.techbrands.com

Made in China