Black------

Grey------

White------

Black------

Grey------

White------

Black------

Grey------

White------

F1+ high resolution DLP™ projector

The F1+ projector has been developed specifi cally for graphically challenging high resolution display purposes. A bright, high resolution 1400 x 1050 pixel image provides the most versatile of all DLP™ projectors available. Medical imaging, visualization, simulation and public displays are amongst the main applications for which it is suited. Advanced optical solutions, powerful signal and video processing, and a fully integrated design philosophy create a projector with an extremely powerful combination of size, image quality and fl exibility. The projectiondesign F1+ defi nes state-of-the-art projection. In addition to the high resolution SXGA+ version, there is also an XGA version available. For the majority of business applications, where overall impression cannot be compromised, the brightness, contrast and and image quality of the F1+ XGA will yield optimal results. With it’s high performance, it is the perfect projector for meeting and conference rooms, where users interact with it on a daily basis.

1400 x 1050 SXGA+ resolution

1400 x 1050 pixel resolution provides the most detailed display of any DLP™ projector available. Ideal for visualization, simulation and medical imaging, the

F1+ easily resolves the fi ner detail of specialty graphics, such as XRay and medical imaging, CAD/CAM and design, and for instance oil and gas reservoir 3D modelling and visualisation. In addition, it provides a very high visual resolution display for immersive simulation. Compared to lower resolutions, such as SVGA or XGA, the SX+ resolution provides more than

306% and 186% pixels respectively. With additional support for 1600x1200 pixels and even higher resolutions - as well as very high perceived resolution of DLP™, the F1+ becomes near “resolutionless”, and as close to a continuous analogue image as possible.

Single Chip DLP™ technology

Single chip DLP™ technology ensures perfect colour uniformity across the image, as it is created by a single display. Instead of combining three displays like in LCD and

LCoS projectors - subject to change and become non-uniform, DLP™ projectors will always stay consistent. For the same reason, there are also no convergence errors that will discolour and smear detail of images. Most importantly, using a single chip DLP™ display ensures long life operation, even in heavy duty applications. Where other technologies change properties over time, and image quality changes dramatically, DLP™ remains consistent over hundreds of thousands of hours. In fact, so long that we guarantee the core DLP™ technology to work for at least 100.000 hours, more than 20 times competing technologies.

High Brightness

The bright, 2500 ANSI lumens available is perfect for most graphical displays, and enables great dynamic images with any screen size in both front and rear projection applications. The F1+’s fl exible adjustability and options for tailoring its’ high brightness to any screen type or size, is unique to this projector.

High Contrast images

The F1+ uses DLP™ technology with DarkChip2™ contrast enhancing technology.

This results in extremely high contrast – up to 2500:1 full on/full off – more than double that of projectors based on competing technologies, such as LCD and LCoS. The high contrast projects highly dynamic images, perfect for instance for discerning subtle detail in high resolution medical imaging, such as XRay images. High contrast also means a very deep black level, so that motion video and graphics really are outstanding.

Actual installation, Information billboards,

Manchester Airport www.projectiondesign.com

SOA – Sealed Optical

Architecture

To ensure faultless and troublefree operation in unforgiving and harsh environments, such as bars and clubs, the F1+ features a fully sealed optical architecture. Dust, smoke and other tiny particles are prevented from entering and contaminating the delicate light engine, thus will not alter the displayed image or quality over time. In addition, it ensures the projector requires almost no servicing and maintenance.

Designed for 24/7 continuous use

The F1+ has been designed to withstand 24/7 continuous use, in applications such as control rooms and public displays. With DLP™ technology, long life mechanical elements such as magnesium and ceramics, as well as over-specifi ed fans and colour wheel engine, the F1+ only requires very low frequency maintenance to meet the criteria for continuous use.

Multiple available product confi gurations

The F1+ is available with a range of different colour wheels, each suited to different applications. The options tailor the F1+ to specifi c properties, for instance photographic colour reproduction, high brightness, video performance, improved contrast, etc. And, for the most extreme conditions of all, the F1+ is available with no colour wheel at all – to create a fully monochromatic image. This is perfect for applications where colour is not used, and a high contrast black and white image is desired, for instance in some medical and engineering applications.

Custom Optimization controls for multiple screen confi gurations

The F1+ builds on and extends the Digital Dynamic Concept integrated in our home theatre projectors. With continuously adjustable lamp power (200 – 250W), white boost and clear segment control, as well as per-source customizable colour balance and gain/offset, DDC provides an easy to use and simple way of matching a number of projectors clustered together, for single display use.

Image sizes and distances

Offset (8%) m ft

0.60

1.98

Image height m ft

7.50

24.75

0.54

1.78

0.48

1.58

6.75

22.28

6.00

19.80

0.42

1.39

0.36

1.19

0.30

0.99

0.24

0.79

0.18

0.59

0.12

0.40

0.06

0.20

0 0.0

5.25

17.33

4.50

14.85

3.75

12.38

3.00

9.90

2.25

7.43

1.50

4.95

0.75

2.48

0 0

0

0

1.00

3.30

2.00

6.60

Image width m ft

10.00

33.00

9.00

29.70

8.00

26.40

Screen diagonal m ft

12.50

41.25

11.25

37.13

10.00

33.00

3.00

9.90

1 :

1

1

XGA+ Fixed 1 :

SXG

A+ Fixed

1 1

1 1

1

SXGA+ Zoom lens 1.75 :

XGA Zoom lens 2.20 :

SXGA+ Zoom lens 2.2 :

XGA Long thr

XGA Long thr ow Zoom lens 4.

40 : 1

7.00

23.10

6.00

19.80

5.00

16.50

4.00

13.20

3.00

9.90

2.00

6.60

1.00

3.3

4.00

13.20

5.00

16.50

6.00

19.80

7.00

23.10

8.00

26.40

9.00

29.70

0 0

10.00 m

33 .00 ft

Projection distance

0

8,75 28.88

7.50

24.75

6.25

20.63

5.00

16.50

3.75

12.38

2.50

8.25

1.25

4.13

0.0

Highly predictable cost of ownership

The F1+ ensures a low cost of ownership in many ways. The 4000 hour economy lamp mode, extremely low daily maintenance requirements, and the choice of using long life DLP™ technology all result in a projector that is very cost effective in heavy usage situations.

Network connectivity

Simple and easy asset management, as well as precise control is available through the built-in network connectivity. The internal web page provides easy access to setting up projector network properties, and the network interface provides an easy-to-use interface to controlling all projector properties, specially designed for multiple projector installations. Important status parameters, such as power- and lamp mode, accumulated lamp hours, active source and others are readily available.

88mm

278mm 120mm 244mm 278mm

Extreme Size/Weight/Form factor combination

The extreme form factor of the F1+ is not matched by any other projector. While small and unobtrusive in single unit installations, the lightweightand sturdy chassis enables it to withstand mounting and use in very demanding installation environments, such as motion simulators and at-sea applications where the construction provides a stable imaging platform at any time.

Actual installation, Navigation Bridge Simulator,

Courtesy of TRANSAS

Courtesy of AA Video.

Comprehensive connectivity

The F1+ connectivity allows simple connection to nearly any available source, from digital and analogue RGB (DVI and VGA), through various video interfaces, sound,

USB and RS232 in/out, as well as network and a monitor redrive.

Low image processing latency

Ideal for simulation applications and critical displays where delay of input image to output image plays a deciding role, the F1+ features image processing latency as low as one frame for graphics inputs through the DVI and VGA ports. The output image is displayed on the screen immediately upon completion of writing to the frame memory, thus provides a latency of only ~17ms with a 60Hz input signal. The

F1+ runs frame synchronized on any input signal from 48 – 62 Hz

Multiple Projector Control Options

The F1+ can be controlled through both a TCP/IP network protocol, via RS232, or from a comprehensive remote with multiple discrete commands. Using RS232, up to 128 devices can be connected in series, and commands can be broadcast from a single UART. The remote features discrete commands such as source select, brightness, contrast, colour, volume, in addition to menu control, AV mute and freeze image commands.

wide angle lens standard lens

Zoom and Wide Angle Lens options

The F1+ is delivered with a standard throw zoom lens, covering most application needs, or with an optional ultra wide angle lens, at 1:1 throw ratio. Both lenses are designed with performance in mind, with high brightness and contrast, and very low optical distortion. Unlike any competing lens, the wide angle optics feature a fully off-set image, making it possible to mount the F1+ fl at on a ceiling, but with a very short throw ratio. The high speed of the wide angle lens – F/2.8 – is the same as for the standard zoom, so full brightness is retained at any one time.

www.projectiondesign.com

Projector

Display

Compatibility

Optics

Inputs / Outputs

Supplied Accessories

General

Technology

Concept

Resolution

Brightness

Contrast Ratio

Aspect Ratio

Colours

Image Processing Latency

Computer Compatibility

Horizontal Scan Frequency

Vertical Scan Frequency

Video Compatibility

Bandwidth

Standard Lens

Throw Ratio (distance : width)

Image size (diagonal)

Focusing Distance

Lens Offset (of image height)

Zoom Ratio

Wide Angle Lens

Throw Ratio (distance : width)

Image size (diagonal)

Focusing Distance

Lens Offset (of image height)

Long throw Lens

Throw Ratio (distance : width)

Image size (diagonal)

Focusing Distance

Lens Offset (of image height)

Zoom Ratio

Lamp

Lamp Life (typ)

Computer Inputs

Video Inputs

Audio Inputs

Control and Communication

Computer Output

Audio Output

Cables

Other

Operating noise level (typ)

Dimensions (dwh)

Weight

Power Requirements

Conformances

Operating Temperature

Operating Humidity

Storage conditions

Colour

Warranties

F1+ SX+

101-0050-08 SXGA+ DLP™ digital projector

101-0051-08 SXGA+ wide DLP™ digital projector

LVDS DMD™ with DarkChip2™

Sealed all-glass, prism less optical design

1 400 x 1 050 pixels

2 500 ANSI lumens (typ)

2 500 : 1 (max on/off)

4 : 3, 5 : 4 and 16 : 9 compatible

24-bit colour resolution

~ 1 input frame on graphics port

UXGA, SXGA+, SXGA, XGA, SVGA, VGA

1920 x 1080 - 640 x 480 pixel resolution

RGBHV, RGBS, RGsB

15 - 150 kHz

48 - 190 Hz

HDTV (1080i, 720p, 576i/p, 480i/p)

NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM

205 MHz on analog RGB

165 MHz on digital RGB over DVI f = 33 - 42 mm, F/2.75 - 3.1

1.75 - 2.20 : 1

0.9 - 7.3 m (3 - 24 ft)

1.5 - 10 m (5 - 33 ft)

8%

1.25x

f = 19 mm, F/2.8

1 : 1 throw ratio

2 - 13 meters (6 - 43 ft)

1.5 - 10m

8%

250W UHP™

4 000 hours (eco mode), 2000 hours full power mode

2x 15 pin HDDSUB (analog RGB)

1x DVI-D (digital RGB)

3x RCA (component YUV)

1x 4-pin Mini DIN (S-video Y/C)

1x RCA (composite video)

2x 3.5 mm stereo mini jack (data / video)

2x RS232 9-pin DSUB (control) in/out

1x RJ45 TCP/IP network port

1x USB (mouse control and fi rmware upgrade)

1x 3.5mm mini jack RC repeater

1x 15 pin HDDSUB (analog RGB)

1x 3.5 mm stereo mini jack, variable line level

2 m DVI-D cable

2 m VGA cable, 15pin HDDSUB

2 m USB cable

2 m A/V cable, 3x RCA - 1x RCA + 3.5 mm Mini Jack

Stereo Audio cable 3.5mm Mini Jack - 3.5 mm Mini Jack

Ceiling Mount Cable Cover

Standard IR remote control

28 dB (A) at 20C/ 68F, sea level

244 x 278 x 88 mm (9.6 x 10.9 x 3.5 inches)

3.4 kg / 7.5 lbs

100 - 240 VAC, 50/60 Hz, +/- 10%

350 W power consumption

CE, CSA “C/US”, FCC Class A

0 - 40C / 32 - 104F, 0 - 1500 m

0 - 35C / 32 - 95F, 1500 - 3000 m

20 - 90% RH

20 - 90% RH

Gun metal grey metallic

2 years, 500 hours or 90 days on lamp

F1+ XGA

101-0060-08 XGA DLP™ digital projector

101-0067-08 XGA wide DLP™ digital projector

101-0070-08 XGA long throw DLP™ digital projector

DDR DMD™ with DarkChip2™

Sealed all-glass, prism less optical design

1024 x 768 pixels

3000 ANSI lumens (typ)

2000 : 1 (max on/off)

4 : 3, 5 : 4 and 16 : 9 compatible

24-bit colour resolution

~ 1 input frame on graphics port

UXGA, SXGA+, SXGA, XGA, SVGA, VGA

1920 x 1080 - 640 x 480 pixel resolution

RGBHV, RGBS, RGsB

15 - 150 kHz

48 - 190 Hz

HDTV (1080i, 720p, 576i/p, 480i/p)

NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM

205 MHz on analog RGB

165 MHz on digital RGB over DVI f = 33 - 42 mm, F/2.75 - 3.1

2.20 - 2.80 : 1

0.7 - 5.7 m (2.5 - 18 ft)

1.5 - 10 m (5 - 33 ft)

13%

1.30x

f = 19 mm, F/2.8

1.28 : 1 throw ratio

2 - 13 meters (6 - 43 ft)

1.5 - 10m

13% f = 44.4 mm - 62.5, F/2.8

3.10 - 4.40 : 1 throw ratio

1.4 - 25 meters (6 - 43 ft)

5 - 25m

13%

1.4x

250W UHP™

4 000 hours (eco mode), 2000 hours full power mode

2x 15 pin HDDSUB (analog RGB)

1x DVI-D (digital RGB)

3x RCA (component YUV)

1x 4-pin Mini DIN (S-video Y/C)

1x RCA (composite video)

2x 3.5 mm stereo mini jack (data / video)

2x RS232 9-pin DSUB (control) in/out

1x RJ45 TCP/IP network port

1x USB (mouse control and fi rmware upgrade)

1x 3.5mm mini jack RC repeater

1x 15 pin HDDSUB (analog RGB)

1x 3.5 mm stereo mini jack, variable line level

2 m DVI-D cable

2 m VGA cable, 15pin HDDSUB

2 m USB cable

2 m A/V cable, 3x RCA - 1x RCA + 3.5 mm Mini Jack

Stereo Audio cable 3.5mm Mini Jack - 3.5 mm Mini Jack

Ceiling Mount Cable Cover

Standard IR remote control

28 dB (A) at 20C/ 68F, sea level

244 x 278 x 88 mm (9.6 x 10.9 x 3.5 inches)

3.0 kg / 6.5 lbs

100 - 240 VAC, 50/60 Hz, +/- 10%

350 W power consumption

CE, CSA “C/US”, FCC Class A

0 - 40C / 32 - 104F, 0 - 1500 m

0 - 35C / 32 - 95F, 1500 - 3000 m

20 - 90% RH

20 - 90% RH

Gun metal grey metallic

2 years, 500 hours or 90 days on lamp

601-0052-02

All brands and trade names are the property of their respective owners. Specifi cations subject to change without prior notice. All values are typical and may vary. Patent pending on lamp and cooling system.