Datalogic Magellan 1100i Barcode Scanner Quick Reference Guide

PDF

દસ્તાવેજ

જાહેરાત

Magellan

1100i

Omni-Directional Imaging Scanner

Quick Reference Guide — Guida Rapida

Guide de Référence Rapide — Guía de Referencia Rápida

Schnellanleitung — Referência Rápida

快速参考

—

クイック・リファレンス

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners.

This product may be covered by one or more of the following patents:

4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879 • 4786798 • 4792666 • 4794240 • 4798943

• 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 • 4939356 •

4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120

• 5144118 • 5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 •

5214270 • 5229590 • 5231293 • 5232185 • 5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864

• 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 • 5311000 • 5327451 • 5329103 • 5330370 •

5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 • 5426507 • 5438187

• 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 •

5491328 • 5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531

• 5581707 • 5594231 • 5594441 • 5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 •

5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 • 5675138 • 5682028 • 5686716 • 5696370 • 5703347

• 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 • 5786585 • 5787103 •

5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983

• 5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 •

5929421 • 5945670 • 5959284 • 5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374

• 6042012 • 6045044 • 6047889 • 6047894 • 6056198 • 6065676 • 6069696 • 6073849 • 6073851 • 6094288 •

6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 • 6166375 • 6169614 • 6173894

• 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6244510 • 6259545 • 6260763 •

6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216

• 6332576 • 6332577 • 6343741 • 6454168 • 6478224 • 6568598 • 6578765 • 6705527 • 6857567 • 6974084 •

6991169 • 7051940 • 7170414 • 7172123 • 7201322 • 7204422 • 7215493 • 7224540 • 7234641 • 7243850 • 7374092

• 7407096 • 7490770 • 7495564 • 7506816 • 7527198 • 7527207 • 7537166 • 7562817 • 601 26 118.6 • AU703547 •

D312631 • D313590 • D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127 • D350735 •

D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565 • D372234 • D374630 •

D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • D606544

•EP0256296 • EP0260155 • EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 •

EP0498366 • EP0531645 • EP0663643 • EP0698251 • EP01330772 • EP870761 • GB2252333 • GB2284086 •

GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 • GB2333163 • GB2343079 •

GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 • JP2513442

• JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • RE40071

Additional patents pending.

English ..................................................1

Italiano .................................................5

Español .................................................9

Portugues ...........................................13

Francais ..............................................17

Deutsch ...............................................21

Chinese ...............................................25

Japanese .............................................29

Quick Reference Guide i

NOTES

ii Magellan™ 1100i

DATALOGIC ADC, INC. MAGELLAN

LICENSE AGREEMENT

END USER

Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the

Datalogic Product, you will be deemed to have accepted the terms and conditions of this

Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the

Software, and you must contact the party from whom you acquired the Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Datalogic Holdings, Inc. and its subsidiaries and affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under the terms of that license agreement. Datalogic and End User hereby agree as follows:

1. Definitions.

1.1 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the

Datalogic Product, whether in printed, "online", or other form.

1.2 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or (4) independently developed without access to Proprietary Information.

1.3 "Datalogic Product" means the Datalogic Magellan

800i, Magellan

1000i series,

Magellan

1100i series, Magellan lan

TM lan

2300HS series, Magellan

8100 series, Magellan

1400i series, Magellan

2200VS series, Magel-

3200VSi series, Magellan

8200 series, Magellan

3300HSi series, Magel-

8300 series, Magellan

8400 series, Magellan

8500 series, Magellan

9500 series, Magellan

9800i series and/or

Magellan SL

series scanner and/or scanner/scale product, including all embedded

Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.

1.4 "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Datalogic Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User.

Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under license." End

User is not entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any

Quick Reference Guide iii

other person or organization, for purposes other than as expressly provided in this

Agreement, without Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses, but instead may elect to notify End User that End

User is deemed to have ordered and accepted a license for each breaching use. End

User shall pay Datalogic the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and conditions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or

Datalogic's third party licensors and that the Software is protected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic

Product exclusively for End User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five

(5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that has been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End

User modifies the product, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-

VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS

OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPEiv Magellan

1100i

CIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic Holdings, Inc., Legal Department, 959

Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for

End User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to such claim, or 4) provide End User an opportunity to return the

Datalogic Product and receive a refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured, or modified to the specifications of End User, or

3) End User's modification of the Datalogic Product without written authorization from

Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION

CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL

PROPERTY INFRINGEMENT, CANCELS AND SUPERSEDES ANY PRIOR AGREE-

MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING

SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-

TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE

PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY

CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S

LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUD-

ING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER

BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PROD-

UCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR

ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR

SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT,

INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATA-

LOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S.

Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in

Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United Nations Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any non-

Quick Reference Guide v

embedded software and shall return to Datalogic or destroy all non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the

Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic Holdings, Inc., 959 Terry

Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions.

11.4

Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the

State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's assets are located.

this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.

- END -

vi Magellan

1100i

Quick Reference

This guide is provided to help get your installation up-and-running quickly and efficiently. For more details, including programming information, reference the Product Reference Guide (PRG), which is available for viewing and download from the Datalogic website listed on the back cover of this manual.

Installation

Route the interface cable from the terminal or host. Plug the AC adapter (if one is used) into a wall outlet and the interface (I/F) cable, then route and attach the I/F cable to the scanner. Verify operation by presenting known-good barcodes to the scanner.

The unit should beep

and/or flash its good read LED and send the barcode data to the host or terminal. If not, refer to the Troubleshooting section of this guide.

Scanner installation is complete.

Connect

Here

I/F Cable

To Host/Terminal

A/C Adapter

(if needed)

For 220-230 VAC adapters, the cord must be facing down as shown in the illustration. If installed upwards, it will pose an undue strain on the socket outlet.

The Magellan 1100i utilizes illumix™ intelligent illumination technology to optimize light levels for a variety of bar code scanner functions including automatic reading of bar codes from printed surfaces, mobile devices and image capture in variable contrast environments.

1. Beeper and LED behavior is selectable and may have been disabled by a previous user.

Quick Reference Guide 1

Optional Stand

An optional stand is available for the scanner which can be permanently attached to a wall or countertop. After locating the stand in an optimal position, the scanner (along with the stand) can be detached for portable use by lifting the entire unit as shown below.

Power Supply

Models require

either a Listed class II or class III with a Limited

Power Source (LPS). For the safety certification to be valid, class

III input power sources must be IEC/EN60950-1 (EN 60335series, EN 60065 or relevant) approved.

Input: 100 - 240 VAC Output: 5 VDC

Max. Current: 2.5 A

Max. Power: 12.5 W

System Input Voltage

Input: 4.5 - 14.0 VDC Max. Power: 2.5 W

How to Scan

barcodes can be presented to the scanner while it is resting on the counter or in the optional stand, or the scanner/mount can be lifted and held as shown.

Optional Scan Button Shown

*Optional Stand

1. Power Off the Terminal (POT) units do not require a power supply.

2 Magellan™ 1100i

Targeted Scanning Mode

In order to read a barcode (button option only)...

• press and hold the scan button. An aiming pattern will appear.

• with the aiming pattern fairly centered over the barcode to be read, release the button to read the label.

NOTE

The scanner will not read barcodes while the button is pressed.

Targeted Scanning Mode will read barcodes in any orientation.

The scanner will return to full pattern Omni

Mode after a configurable time has elapsed.

Troubleshooting

If the scanner is not operating properly, the following checks should be performed:

1. If the scanner uses an external power supply and the external power supply has failed, the scanner will not operate.

Exchange the power supply with a known good power supply and retest operation.

Product

Reference

Guide

2. Verify the interface cable is securely attached to the host.

Consult your technical support personnel or refer to your host system manual to verify the proper connection for the scanner.

Quick Reference Guide 3

3. Verify that the interface cable is securely attached to the scanner.

4. Check that the barcodes are of sufficient quality to be recognized by the scanner. Wrinkled, smudged, or torn labels can cause the scanner to not read at all. Scan known-good labels of an active symbology

to check the scanner's read operation.

5. Ensure that the scanner's interface type is compatible with the host terminal by consulting your POS system manual and/or the Product Reference Guide.

If the scanner still does not function properly, contact your local supplier or Datalogic Customer Support Services.

Compliance Statement

This Class B digital apparatus complies with Canadian ICES -003.

Cet appareil numérique de la classe B est confrome à la norme NMB-003 du

Canada.

1. Reading of the various barcode symbologies can be independently enabled or disabled in the scanner.

4 Magellan™ 1100i

Guida Rapida

La presente guida vi aiuterà ad eseguire un'installazione rapida ed efficace. Per ulteriori dettagli, inclusi i dettagli relativi alla programmazione, consultare la Guida di Riferimento del Prodotto, che può essere consultata online e scaricata dal sito di Datalogic indicato sul retro del presente manuale.

Installazione

Svolgere il cavo d'interfaccia dal terminale o host. Inserire l'eventuale adattatore CA nella presa a parete e nel cavo d'interfaccia (I/

F), quindi collegare il cavo I/F allo scanner. Verificare il funzionamento facendo leggere allo scanner dei codici a barre dei quali si conosce il contenuto e in buono stato. L'unità emettera un suono

e/o farà lampeggiare il LED che segnala la corretta lettura del codice e invierà i dati del codice all'host o al terminale. In caso contrario, consultare la sezione "Risoluzione dei problemi" della presente guida.

L'installazione dello scanner è completa.

Collegare qui

Cavo d'interfaccia

All'host/terminale

Adattatore C

(se necessario)

Il cavo degli adattatori 220-230

VCA deve essere posizionato verso il basso come indicato nell'illustrazione. In caso contrario l'uscita della presa di corrente sarà sotto sforzo.

Il Magellan 1100i usa la tecnologia di illuminazione intelligente illumix™ allo scopo di ottimizzare i livelli di luce in molteplici funzionalità dello scanner inclusi: lettura automa tica di codici a barre da superfici stampate, dispositivi mobili e image capture in ambienti con contrasto variabile.

1. È possibile selezionare suono oppure LED. Tenere conto della configurazione impostata dall'utente che ha utilizzato lo scanner in precedenza.

Guida Rapida 5

Supporto Opzionale

È disponibile un supporto opzionale che può essere attaccato permanentemente alla parete o sul bancone. Dopo aver posizionato il supporto in posizione ottimale, lo scanner e il supporto potranno essere staccati per l'utilizzo mobile sollevando l'intera unità come illustrato in basso.

Alimentazione

Questi modelli

devono essere alimentati con alimentatori omologati di classe II o classe III LPS (Limited Power Source, sorgente di corrente limitata). Affinché il certificato di sicurezza sia valido, le sorgenti di alimentazione di classe III devono essere conformi a

IEC/EN60950-1 (serie EN 60335, EN60065 o relativi).

Tensione ingresso:

100 - 240 VAC

Tensione uscita:

5 VDC

Sistema di tensione in ingresso

Tensione ingresso: 4.5 - 14.0 VDC

Consumo massimo: 2.5 A

Potenza massima: 12.5 W

Potenza massima: 2.5 W

Come utilizzare lo Scanner

È possibile presentare i codici al lettore, mentre è posizionato sul bancone oppure inserito nel supporto opzionale, oppure lo scanner può essere sollevato come da illustrazione.

Pulsante opzione

*Supporto opzionale

1. Le unità alimentate dal terminale (POT - Power Off the Terminal) non richiedono alimentazione di rete.

6 Magellan™ 1100i

Modalità di Scansione a Bersaglio

Per utilizzare lo scanner con il pulsante opzione:

• tenere premuto il pulsante. Apparirà un mirino luminoso.

• Posizionare il mirino luminoso al centro del codice a barre da leggere e rilasciare il pulsante opzione per eseguire la lettura.

NOTE

Lo scanner non legge i codici, se il pulsante è premuto.

La modalità di scansione bersaglio consente di leggere codici orientati in qualunque verso.

Lo scanner ritornerà in modalità Omni dopo un periodo di tempo impostabile.

Risoluzione dei Problemi

Nel caso lo scanner non funzionasse correttamente, eseguire i seguenti controlli:

1. Se lo scanner utilizza un'alimentazione esterna e quest'ultima non fosse operativa, lo scanner non funzionerà. Utilizzare una sorgente di alimentazione affidabile e riprovare.

Product

Reference

Guide

2. Verificare che il cavo d'interfaccia sia saldamente collegato all'host. Consultare il proprio personale tecnico oppure il manuale del sistema host per controllare il corretto collegamento dello scanner.

Guida Rapida 7

3. Verificare che il cavo d'interfaccia sia saldamente collegato allo scanner.

4. Controllare che i codici a barre siano di qualità sufficientemente leggibile per lo scanner. Etichette piegate, strappate o sbavate potrebbero non essere leggibili. Utilizzare etichette sicuramente leggibili che appartenengono ad un sistema di simbologia

utilizzato per controllare il funziomento dello scanner in lettura.

5. Assicurarsi che il tipo di interfaccia dello scanner sia compatibile con il teminale/host consultando il manuale del POS e/ o la Guida di riferimento del prodotto.

Se lo scanner non funziona correttamente, contattare il rivenditore locale oppure il Servizio Assistenza Clienti di Datalogic.

Dichiarazione di Conformità

Il presente apparto digtale di Classe B è conforme alla normativa canadese

ICES-003.

1. La lettura delle varie simbologie dei codici a barre può essere indipendentemente abilitata o disabilitata nello scanner.

8 Magellan™ 1100i

Guía de Referencia Rápida

La finalidad de esta guía es ayudarle a instalar el equipo de forma rápida y eficiente. Para obtener más datos, incluida información de programación, consulte la Guía de referencia del producto

(PRG) que podrá ver y descargar de la página Web de Datalogic, cuya dirección aparece en la contracubierta de este manual.

Instalación

Encamine el cable de interfaz desde el terminal o el equipo central. Conecte el adaptador de CA (si se utiliza uno) a una toma de corriente de pared y al cable de interfaz (I/F). A continuación encamine y conecte el cable I/F al escáner. Para comprobar el funcionamiento, coloque un código de barras en buen estado ante el escáner. La unidad emitirá un pitido

y/o parpadeará el LED de lectura correcta y enviará los datos del código de barras al equipo central o al terminal. Si no es así, consulte la sección Solución de averías de esta guía.

La instalación del escáner ha finalizado.

Cable de interfaz

Al equipo central/terminal

Conectar aquí

Adaptador de CA (si es necesario)

Si se utilizan adaptadores de

220-230 V CA, el cable debe orientarse hacia abajo, como muestra la imagen.

Si se instala hacia arriba, ejercerá una tensión indebida sobre la toma de corriente.

El Magellan 1100i utiliza la tecnología de Iluminación illumix™ la cual perfecciona niveles de luz para una variedad de funciones de un lector de código de barras incluyendo lectura automática de códigos de barras impresos, en pantallas de dispositivos móviles y captura de imágenes en ambientes con contrastes variables.

1. El funcionamiento del indicador acústico y el LED es seleccionable y es posible que un usuario anterior lo haya desactivado.

Guía de referencia rápida 9

Soporte Opcional

Existe un soporte opcional para el escáner que puede acoplarse de forma permanente a una pared o a un mostrador. Después de colocar el soporte en la posición óptima, se podrá desmontar el escáner (junto con el soporte) si desea trasladarlo de lugar. Para ello, solo tiene que elevar la unidad completa, tal y como muestra la imagen.

Suministro Eléctrico

Se require fuente limitada

de alimentación (LPS) alistada en la clase II o la clase III para estos modelos. La certificación de seguridad solamente es válida si las enchufadas para fuente de alimentación clase III están aprobadas por IEC-EN60950-1 (serie EN

60335, EN 60065 o comparable).

Enchufada:

100 - 240 VAC

Despacho:

5 VDC

Sistema de tensión de entrada

Enchufada: 4.5 - 14.0 VDC

Corriente máximo: 2.5 A

Poder máximo: 12.5 W

Poder máximo: 2.5 W

Instrucciones Para Escanear

Los códigos de barras pueden colocarse delante del escáner mientras éste permanece apoyado sobre el mostrador o el soporte opcional. También es posible elevar y sostener el escáner/unidad como muestra la imagen.

Opción de interruptor mostrada

*Soporte opcional

1. Las unidades de desconexión del terminal (POT) no precisan una fuente de alimentación.

10 Magellan™ 1100i

Modo de Exploración de Objetivo

Para leer un código de barras (solo opción de interruptor)...

• Mantenga pulsado el interruptor. Aparecerá un haz para apuntar.

• Centre el haz para apuntar lo más posible sobre el código de barras que vaya a leer y suelte el interruptor para leer la etiqueta.

NOTA

El escáner no leerá códigos de barras mientras el interruptor permanezca pulsado.

El modo de exploración de objetivo leerá los códigos de barras en cualquier dirección.

El escáner volverá al modo de haz completo una vez que haya transcurrido un tiempo configurable.

Solución de Problemas

Si el escáner no funciona correctamente, deberán realizarse las siguientes comprobaciones:

1. Si el escáner utiliza una fuente de alimentación externa y dicha fuente se ha averiado, el escáner no funcionará. Cambie la fuente de alimentación por otra en buen estado y restablezca el funcionamiento.

Product

Reference

Guide

2. Compruebe que el cable de interfaz está perfectamente acoplado al equipo central. Pida ayuda al personal de asistencia técnica o consulte el manual del sistema central para comprobar que el escáner esta correctamente conectado.

Guía de referencia rápida 11

3. Compruebe que el cable de la interfaz está perfectamente acoplado al escáner.

4. Compruebe que los códigos de barras tienen la calidad suficiente para ser reconocidos por el escáner. El escáner no leerá etiquetas arrugadas, emborronadas o rasgadas. Para comprobar el funcionamiento de la función de lectura del escáner, explore etiquetas que contengan una simbología activa en buen estado

5. Asegúrese de que el tipo de interfaz del escáner es compatible con el terminal central. Para ello, consulte el manual del sistema POS y/o la Guía de referencia del producto.

Si el escáner sigue sin funcionar correctamente, póngase en contacto con su proveedor local o con el Departamento de Atención al Cliente de Datalogic.

Nota de Conformidad

Este aparato digital de Clase B cumple la normativa canadiense ICES -003.

1. La lectura de distintas simbologías de códigos de barras puede activarse o desactivarse de forma independiente en el escáner.

12 Magellan™ 1100i

Referência Rápida

Este guia é fornecido para ajudar a ter sua instalação funcionando rápida e eficientemente. Para obter maiores detalhes, incluindo informações de programação, consultar o Guia de Referência do

Produto (PRG), que está disponível para visualização e download a partir do web-site Datalogic listado na contracapa deste manual.

Instalação

Rotear o cabo de interface a partir do terminal ou do host. Ligar o adaptador C.A. (se for usado um) em uma tomada na parede e o cabo de interface (I/F), então rotear e conectar o cabo I/F ao leitor. Verificar a operação apresentando códigos de barra em bom estado e reconhecidos pelo leitor. A unidade deve emitir um bip

1 e/ou lampejar sua boa leitura, enviando os dados de código de barras para o host ou terminal. Caso contrário, consultar a seção

Diagnóstico deste guia.

A instalação do leitor está completa.

Conectar aqui

Cabo de interface

Para Host/Terminal

Adaptador C.A.

(se necessário)

Para adaptadores

220-230 VAC, o fio deve estar voltado para baixo, como mostrado na ilustração. Se for instalado para cima, irá causar peso indevido na saída do soquete.

O Magellan 1100i utiliza tecnologia de Iluminação illumix™ que otimiza niveis de luz para uma variedade de funções de um leitor de código de barras, incluindo a leitura automatica de códigos de barras impressos, em telas de dispositivos móveis e captura de imagens em ambientes com contrastes variáveis.

1. O comportamento do bip e do LED pode ser selecionado e pode estar desabilitado por um usuário anterior.

Referência Rápida 13

Suporte Opcional

Um suporte opcional está disponível para o leitor, que pode ser conectado permanentemente a uma parede ou um balcão. Após localizar o balcão em uma boa posição , o leitor (paralelo ao balcão) pode ser destacado para uso portátil, levantando a unidade como mostrado abaixo.

Adaptador C.A / C.C.

Modelos podem ser classificados

como Classe II ou Classe III, com Fonte de Energia Limitada (LPS). Para o certificado de segurança eletrica ser válido, uma fonte de entrada de energia Classe

III precisa ser approvada como IEC/EN60950-1 (EN 60335serie, EN 60065 ou relevante).

Entrada:

100 - 240 V c.a.

Saída:

5 VDC

Sistema de tensão de entrada

Entrada: 4.5 - 14.0 VDC

Corrente Max.: 2.5 A

Potencia Max.: 12.5 W

Potencia Max.: 2.5 W

Como Fazer Leitura

Os códigos de barra podem ser apresentados ao leitor enquanto este está no balcão ou na suporte opcional, ou o leitor/montagem pode ser levantado e segurado como mostrado abaixo.

Opção com Botão

*Suporte opcional

1. Fornecimento de energia das unidades do tipo POT não exigem uma fonte de energia externa.

14 Magellan™ 1100i

Modo de Leitura Direcionada

Para ler um código de barra (somente opção de butão)...

• Pressionar e segurar o butão. Um padrão almejado irá aparecer.

• Com o padrão almejado centrado no código de barra para ser lido, soltar o butão para ler a etiqueta.

NOTA

O leitor não irá ler códigos de barra enquanto o butão estiver pressionado.

Modo de Leitura Etiquetado irá ler códigos de barra em qualquer orientação.

O leitor irá retornar para o padrão total Omni

Mode depois que um tempo configurável tiver passado.

Diagnóstico

Se o leitor não estiver operando de forma apropriada, as seguintes to verificações devem ser realizadas:

1. Se o leitor usar um fornecimento de energia externo e este estiver falhando, o leitor não irá operar. Trocar o fornecedor de energia com um reconhecidamente bom e testar novamente a operação.

Product

Reference

Guide

2. Verificar se o cabo de interface está conectado com segurança ao host. Consultar seu suporte técnico ou o manual do sistema host para verificar a conexão apropriada para o leitor.

Referência Rápida 15

3. Verificar se o cabo de interface está conectado de forma segura ao leitor.

4. Verificar se os códigos de barra são de qualidade suficiente para serem reconhecidos pelo leitor. Etiquetas dobradas, manchadas ou molhadas podem fazer com que o leitor não as leia. Fazer o scan de etiquetas boas de uma simbologia

para verificar a operação de leitura do leitor.

5. Garantir que o tipo de interface do leitor é compatível com o terminal host, consultando seu manual do sistema PDV e/ou o Guia de Referência do Produto.

Se o leitor não funcionar ainda adequadamente, contactar seu fornecedor local ou os Serviços de Suporte ao Cliente.

Declaração de Conformidade

Este equipamento digital Classe B atende à norma Canadense ICES -003.

1. A leitura de várias simbologias de código de barra pode ser independentemente habilitada ou desabilitada no leitor.

16 Magellan™ 1100i

Guide de Référence Rapide

Ce guide est fourni afin de vous aider à installer rapidement et efficacement votre lecteur de codes à barres. Pour plus de détails concernant les informations sur la programmation, consultez le Guide de Référence du

Produit qui est disponible soit pour lecture soit pour téléchargement à partir du site Internet Datalogic indiqué au dos de ce manuel.

Installation

Acheminez le câble d'interface à partir du terminal ou de l'ordinateur hôte. Branchez l'adaptateur CA (courant alternatif ) (s'il est nécessaire d'en utiliser un) à une prise du mur et le câble d'interface (I/F), ensuite acheminez et connectez le câble I/F au scanner. Vérifiez l'opération en présentant au scanner des codes à barres corrects. l'unité devrait émettre un bip

sonore et/ou faire clignoter la diode pour confirmer que la saisie est correcte et envoyez les données du codes à barres à un ordinateur hôte ou au terminal. Si ce n'est pas le cas, consultez la section Diagnostic de

Pannes de ce guide.

L'installation du scanner est terminée.

Connectez ici

Câble d'Interface

A l'ordinateur hôte/Terminal

Adaptateur CA

(si nécessaire)

Pour les adaptateurs 220-

230 VCA, le cordon doit être face vers le bas comme montré sur l'illustration. S'il est installé vers la haut, ceci provoque une tension excessive au niveau de la prise.

Le scanner Magellan 1100i fonctionne avec la technologie dernière génération d’illumination intelligente illumix™, qui permet d’optimiser les niveaux de lumière automatiquement pour permettre une agressivité de lecture inégalée des codes sur papier et écran d’appareils portables ainsi que la capture d’images quelque soit la luminosité.

1. Le bip sonore et le clignotement de la diode LED peuvent être sélectionnés et peuvent avoir été désactivés par un utilisateur précédent.

Guide de Référence Rapide 17

Support Facultatif

Un support facultatif est disponible pour le scanner qui peut être fixé en permanence à un mur ou à un comptoir. Après avoir placé le support dans une position optimale, le scanner (ainsi que le support) peuvent

être détachés pour un usage portatif en levant l'unité complète comme illustré ci-dessous.

Alimentation Électrique

Modèles

référencés Classe II et Classe III nécessitant une alimentation externe (Limited Power Source). Afin de valider le certificat de sécurité, l’alimentation classe III doit être certifiée IEC/EN60950-1 (Séries EN

60335, EN 60065 ou équivalent).

Tension d'entrée:

100 - 240 VAC

Tension de sortie:

5 VDC

Système de tension d'entrée

Tension d'entrée: 4.5 -

14.0 VDC

Max. de courant: 2.5 A

La puissance max.: 12.5 W

La puissance max.: 2.5 W

Comment Scanner

La lecture peut être en mode mains libres pour les pièces faciles à manipuler ou à la main pour les pièces plus encombrantes.

Bouton pour mode ciblée

*Support Facultatif

1. Les unités de mise hors tension du terminal n'exigent aucune alimentation

électrique.

18 Magellan™ 1100i

Mode Saisie Ciblée

Afin de saisir un code-barre (option commutation uniquement)...

• appuyez et maintenez la pression sur le bouton de commutation. Un rayon de visée apparaîtra.

• centrez bien le rayon de visée au-dessus du codes à barres qui doit être saisi, puis relâchez le bouton pour lire l'étiquette.

NOTE

Le scanner ne lira pas les codes à barres tant que le bouton sera enfoncé. Le Mode de Saisie Ciblée lira les codes à barres dans n'importe quel sens. Le scanner retournera complètement en mode Omni après qu'un certain temps configurable se sera écoulé.

Diagnostic de Pannes

Si le lecteur ne fonctionne pas correctement, effectuez les vérifications suivantes :

1. Si le lecteur utilise une alimentation électrique extérieure et que l'alimentation extérieure ne fonctionne pas, le lecteur ne fonctionnera pas. Echangez la source d'alimentation avec une autre alimentation électrique correcte et effectuez de nouveau l'opération pour vérification.

Product

Reference

Guide

2. Vérifiez que le câble d'interface est correctement connecté à l'ordinateur hôte/terminal. Consultez votre service technique ou référez-vous au manuel de votre ordinateur hôte afin de vérifier si la connexion au lecteur est correcte.

Guide de Référence Rapide 19

3. Vérifiez que le câble d'interface est connecté correctement au lecteur.

4. Contrôlez que la qualité des codes à barres est suffisante pour que ceux-ci soient reconnus par le scanner. Les

étiquettes pliées, sales ou déchirées peuvent empêcher le scanner de lire les codes. Saisissez des étiquettes correctes avec une symbologie

active afin de vérifier que le scanner effectue l'opération de saisie correctement.

5. Assurez-vous que le type d'interface du scanner est compatible avec le terminal hôte en consultant la manuel de votre système POS et/ou le Guide de Référence du Produit.

Si le lecteur ne fonctionne toujours pas correctement, contactez votre fournisseur local ou le Service d'Assistance Clientèle de Datalogic.

Déclaration de Conformité

This Class B digital apparatus complies with Canadian ICES -003.

Cet appareil numérique de la classe B est confrome à la norme NMB-003 du Canada.

1. La lecture des différentes symbologies et de codes à barres peuvent être activées ou désactivées de façon indépendante.

20 Magellan™ 1100i

Schnellanleitung

Diese Anleitung soll eine schnelle und effiziente Installation und Inbetriebnahme ermöglichen. Weitere Einzelheiten, u.a. zur Programmierung, entnehmen Sie dem Produktleitfaden (Product Reference Guide,

PRG), der zum Anzeigen und Herunterladen auf der Datalogic-Webseite verfügbar ist (siehe Rückseite dieses Leitfadens).

Installation

Verlegen Sie das Interfacekabel vom Haupt- oder Endgerät. Schließen Sie den Netzadapter (sofern verwendet) an einer Netzsteckdose und am

Interfacekabel (IF-Kabel) an, und verlegen Sie das IF-Kabel zum Scanner und schließen es daran an. Führen Sie einen Funktionstest aus, indem

Sie mit dem Scanner garantiert funktionsfähige Barcodes einlesen. Das

Gerät muss einen Piepton

aussenden und/oder mit der gut sichtbaren

LED blinken und die Barcodedaten an das End- oder Hauptgerät senden. Andernfalls ziehen Sie den Abschnitt zu Fehlerbehebung in diesem

Leitfaden zurate.

Die Scannerinstallation ist abgeschlossen.

Hier anschließen

Interfacekabel

Zum

End-/Hauptgerät

Netzadapter

(falls erforderlich)

Bei 220-230 V-

Adaptern, muss das Kabel wie in der Abbildung nach unten zeigen.

Wenn es nach oben zeigt, wird die Steckdose unnötig belastet.

Der Magellan 1100i verwendet die intelligente Beleuchtungstechnologie illumix™ und optimiert so die automatische Erfassung bei einer Vielzahl von Barcodescannerfunktionen. Hierzu gehört das Lesen von gedruckten

Barcodes sowie von Barcodes auf mobilen Endgeräten und die Bilderfassung in Umgebungen mit unterschiedlich starker Beleuchtung.

1. Piepton- und LED-Verhalten können eingestellt werden und sind durch Vornutzer ggf. deaktiviert.

Schnellanleitung 21

Optionaler Ständer

Zu dem Scanner gibt es einen optionalen Sockel zur dauerhaften Befestigung an einer Wand oder Ladentheke. Nachdem Sie den Sockel optimal positioniert haben, können Sie den Scanner (mit Sockel) für freihändigen Einsatz abnehmen, indem Sie das gesamte Gerät wie unten dargestellt anheben.

Stromversorgung

Die Modelle

erfordern eine Stromquelle der Klasse II oder III mit einer

Leistungsbegrenzung (LPS). Für eine gültige Sicherheitszertifizierung müssen Klasse III Stromquellen am Eingang nach den Bestimmungen

IEC/EN60950-1 (EN 60335-Serien, EN 60065 oder entsprechenden) zugelassen sein.

Eingang:

100 - 240 VAC

Ausgang:

5 VDC

System Eingangsspannung

Eingang: 4.5 - 14.0 VDC

Max. Strom: 2.5 A

Max. Leistung: 12.5 W

Max. Leistung: 2.5 W

Scanverfahren

Barcodes werden mit dem Scanner eingescannt, während dieser auf der

Ladentheke steht oder am optionalen Sockel befestigt ist, oder indem der

Scanner/die Halterung hochgehoben und wie folgt gehalten wird.

Optionaler Schalter

*Optionaler Sockel

1. Für Geräte mit POT-Option (Power Off the Terminal) ist keine Stromversorgung erforderlich.

22 Magellan™ 1100i

Zielscanmodus

So lesen Sie einen Barcode ein (nur optionaler Schalter):

• Schalter gedrückt halten Ein Zielmuster wird angezeigt.

• Zielmuster entsprechend über dem einzulesenden Barcode ausrichten und Schalter zum Scannen des Etiketts loslassen.

Bei gedrücktem Schalter werden die Barcodes vom Scanner nicht eingelesen.

HINWEIS

Mit dem Zielscanmodus werden Barcodes in jeder Ausrichtung eingelesen.

Der Scanner wechselt nach Ablauf einer konfigurierbaren Zeit wieder in den omnidirektionalen Vollmustermodus.

Fehlerbehebung

Bei fehlerhaftem Scannerbetrieb prüfen Sie Folgendes:

1. Wenn der Scanner mit einer externen Stromversorgung betrieben wird, funktioniert er nicht, wenn diese ausfällt.

Stromversorgung durch ein garantiert funktionsfähiges Gerät ersetzen und Betrieb testen.

Product

Reference

Guide

2. Sicherstellen, dass das Interfacekabel am Endgerät richtig angeschlossen ist. Wenden Sie sich an Ihr zuständiges Technikpersonal oder ziehen Sie das Endgeräthandbuch zurate, um einen ordnungsgemäßen Anschluss des Scanners sicherzustellen.

Schnellanleitung 23

3. Sicherstellen, dass das Interfacekabel am Scanner richtig angeschlossen ist.

4. Sicherstellen, dass die Barcodes ausreichende Qualität aufweisen, um vom Scanner erkannt zu werden. Zerknitterte, beschmierte, oder angerissene Etiketten machen ein Einlesen unmöglich. Scannen Sie garantiert gute Etiketten mit aktiver Symbologie

, um die

Einlesefunktion des Scanners zu überprüfen.

5. Vergewissern Sie sich, dass der Schnittstellentyp des Scanners mit dem Endgerät kompatibel ist, indem Sie das Handbuch des POS-Systems und/oder den Produktleitfaden (Product

Reference Guide) zurate ziehen.

Wenn der Scanner weiterhin nicht ordnungsgemäß funktioniert, wenden

Sie sich an Ihren örtlichen Händler oder an den Datalogic-Kundensupport.

Erfüllung von Vorschriften

Dieses Digitalgerät der Klasse B entspricht dem kanadischen Standard ICES -003.

1. Das Einlesen der verschiedenen Barcodesymbologien kann im Scanner unabhängig aktiviert bzw. deaktiviert werden.

24 Magellan™ 1100i

快速参考

提供本指南帮助您迅速有效地安装和运行。欲知详

情，包括编程信息，请参阅产品参考指南 (PRG)，可以从

本指南封底列出的 Datalogic 网站浏览和下载该指南。

安装

对从终端或主机来的接口电缆进行布线。将 AC 适配

器 ( 如果使用了的话 ) 插入墙壁上的电源插座和 (I/F) 电

缆接口，然后布线并将 I/F 电缆连接到扫描器。用已知的

好条形码进行检查。扫描器的喇叭

应该鸣响并且 / 或者它的 LED 应该闪烁以表示读数正

确，同时将条码数据发送到主机或者终端。如果无鸣响或

者不闪烁，参阅本指南的故障检修部分。

至此 1, 扫描器安装完毕。

Magellan 1100i 采用 illumix ™ 智能照明技术，可优化

各种条形码扫描器的亮度级别

功能包括自动读取印刷表面、移动设备上的条形码和捕获

各种对比环境中的图像。

1. 蜂鸣器和 LED 的状态可选，并可由先前用户禁止。

快速参考

可选用机座

可使用可选机座将扫描器永久地装在墙壁或柜台上。

将机座放在一个最佳位置后，可以像图例所示的那样举起

整个扫描器 ( 与机座一起 ) 进行使用。

电源

有些型号要求使用所列出的第

类或者 LPS 电源 3 对

扫描器进行直接供电。电源块要求 class II 或 class III

有限电源。

为保证安全证书有效，class III 输入源必须满足

IEC/EN60950-1(EN 60335-series, EN 60065 or relevant) 标准。

输入

: 100 - 240

VAC

系统输入电压

输入

: 4.5-14.0 VDC

输出

: 5 VDC

最大电流

: 2.5 A

最大功率

: 12.5 W

最大功率

: 2.5 W

怎样进行扫描

将条码静止在柜台上或者可选机座上对着扫描器，或

者将扫描器 / 机座如图所示那样举起后进行扫描。

1. POT 型不需要电源。

26 Magellan™ 1100i

瞄准扫描模式

为了读条码 ( 仅适用于开关型 ) ，应该：

• 压下开关并保持，进入瞄准模式。

• 在瞄准模式下对准要读取的条码，松开开关读标

签。

注意

在开关被按着时扫描器不会读条码。

瞄准扫描模式能在任意方向上读条码。

在一定时间之后扫描器将返回到全向模式。

故障处理

如果扫描器不能正常工作，应当进行以下检查：

1.如果扫描器使用外部电源供电而外部电源发生故障，

则扫描器不会工作。用已知的能正常工作的电源进行

替换并重新进行试验。

Product

Reference

Guide

2.检验接口电缆与主机是否牢固地连接。咨询技术支持

人员或参阅主机系统指南以核实扫描器是否已经适当

的连接。

快速参考

3.核查接口电缆是否牢固地与扫描器相连接。

4.检查条码质量是否完好以便能让扫描器识别。起皱纹

的、弄脏的、或者撕坏的标签可能导致扫描器根本无

法读出。扫描已知完好的标签来检查扫描器的读操

作。

5.查阅 POS 系统手册和 / 或者产品参考指南确保扫描器

的接口类型与主机终端兼容。

如果扫描器仍然不能正常工作，可与本地供应商或者 Dat

alogic 用户支持服务中心联系。

符合法规声明

B 类数字式设备符合加拿大 ICES-003。

28 Magellan™ 1100i

クイック・リファレンス

このガイドでは、迅速かつ効率的にインストール手順を実行す

るための情報を提供します。プログラミング情報を含む詳細に

ついては、製品リファレンス・ガイド (PRG) を参照してくだ

さい。PRG は、このマニュアルの背表紙に記載されている

Datalogic

Web サイトからダウンロードすることができます。

インストール

インターフェース・ケーブルをターミナルまたはホストに接続

します。必要に応じて AC アダプタを壁コンセントおよびイン

ターフェース (I/F) ケーブルに接続し、I/F ケーブルをスキャ

ナに接続します。状態のよいバーコードをスキャンし、正しく

作動するか確認してください。ユニットはビープ音

を発する

か、読み取り正常 LED を点滅させ、ホストまたはターミナル

にバーコード・データを送信します。正しく作動しない場合

は、このガイドのトラブルシューティング・セクションを参照

してください。

これで、スキャナのインストールが完了しました。

Magellan 1100i は、illumix

™

インテリジェント・イルミネー

ション・テクノロジーを搭載し、印刷物、モバイルデバイス

やイメージキャプチャからのバーコード読み取りを自動で行

い、かつ幅広いコントラストに対応するなど、各種の機能を取

り揃えています。

1. ビーパーおよび LED の動作は選択可能です。また、以前のユーザーに

より無効にされている場合があります。

クイック・リファレンス

オプションのスタンド

オプションのスタンドを使用すると、壁面または台上にスキャ

ナを固定することができます。スタンドを最適な位置に配置し

た後でも、図のようにユニット全体を持ち上げることにより、

スタンドを取り付けたままスキャナを手持ちで使用することが

できます。

電源

一部のモデルは

、ユニットに直接電源を必要とします。

このモデルはリステッドクラス II かクラス III のどちらかの限

られた電源 (LPS) を必要とします。安全証明が有効であるため

には、クラス III の入力電源が IEC/EN60950-1(EN 60335 シ

リーズ、EN60065、もしくは同等 ) に承認されなければなら

なりません。

入力 : 100 - 240 VAC 出力 : 5 VDC

最大 . 電流 : 2.5 A

最大 . 電力 : 12.5 W

システム入力電圧

入力 : 4.5 - 14.0 VDC 最大 . 電力 : 2.5 W

スキャンの仕方

スキャナを卓上またはオプションのスタンドに置いた状態、ま

たはスタンドを取り付けたスキャナを図のように持ち上げた状

態で、バーコードをスキャンすることができます。

1. POT (Power Off the Terminal) ユニットには電源は不要です。

30 Magellan™



1100i

目標スキャニング・モード

バーコードを読み取るには ( スイッチ・オプション使用の場合

のみ ) …

• スイッチを押したままにします。照準パターン

が表示されます。

• 照準パターンを読み取るバーコードの中央に当

て、スイッチを放してラベルを読み取ります。

注記

スイッチを押したままの状態では、スキャナ

はバーコードを読み取りません。

目標スキャニング・モードでは、任意の向き

のバーコードを読み取ることができます。

設定時間を過ぎると、スキャナはフル・パタ

ーン・オムニ・モードに戻ります。

トラブルシューティング

スキャナが正しく作動しない場合は、以下の確認作業を行って

ください。

1. 外部電源をお使いの場合は、外部電源が故障すると

スキャナも作動しません。信頼できる電源装置と交

換し、スキャナが作動するか再テストしてくださ

い。

Product

Reference

Guide

2. インターフェース・ケーブルがホストにしっかりと接続さ

れていることを確認してください。スキャナの正しい接続

方法については、テクニカルサポートの担当者にお問い合

クイック・リファレンス

わせいただくか、ホストのシステムマニュアルを参照して

ください。

3. インターフェース・ケーブルがスキャナにしっかりと接続

されていることを確認してください。

4. バーコードの状態がスキャナで認識するのに十分な状態で

あることを確認してください。ラベルにしわ、汚れ、破れ

などがあると、スキャナでまったく読み取れない場合があ

ります。有効なシンボル体系が印刷された状態のよいラ

ベルをスキャンして、スキャナの読み取り機能をテストし

てください

。

5. スキャナのインターフェースのタイプとホストターミナル

との互換性を確認してください。確認方法は、POS シス

テムマニュアルまたはスキャナの製品ガイドを参照してく

ださい。

上記の方法を実行してもスキャナが正しく作動しない場合は、

お近くのサプライヤーまたは Datalogic カスタマーサポートサ

ービスまでご連絡ください。

適合性について

本製品は、VCCI に適合したクラス B デジタル装置です。

1. さまざまなバーコード体系ごとに、スキャナでの読み取りを有効または

無効にすることができます。

32 Magellan™



1100i

FCC Statement

This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which receiver is connected

• Consult the dealer or an experienced radio / TV technician for help.

The User is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Warranty

Datalogic warrants to Customer that this product will be free from defects in materials and workmanship for a period of 2years from product shipment.

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase

(Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default” configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to

the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;

(iii)

(iv) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus; any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;

(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT.

DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM

DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET

FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR

WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY

THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR

CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POS-

SIBILITY OF SUCH DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.

DECLARATION OF CONFORMITY

EC-70

Rev.: 1

Pag.: 1 di 1

Datalogic ADC, Inc, 959 Terry Street, Eugene, Oregon 97402 USA

La presente dichiarazione di conform ita e rilasciata sotto la responsabilita esclusiva di Datalogic ADC, Inc. per:

This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC, Inc. for:

Cette declaration de conformite est etablie so us la seule responsabilite de Datalogic ADC, Inc:

Diese Konformitatserklarung wird unter der alleinigen Verantwortung des Datalogic ADC, Inc. erte ilt fOr:

Esta declaraci6n de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC, Inc. para:

Magellan 1100i Barcode Reader

e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

2004/108/EC EMC Directive

2011/65/EC RoHS Directive (8 June 2012)

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EN 55022 (C

LASS

B ITE), S

EPTEMBER

2006:

MENDMENT

A1 (C

LASS

B ITE) O

CTOBER

2007

EN 55024, S

EPTEMBER

1998:

MENDMENT

A2:J

UNE

2003

EN 60950-1, APRIL 2006 + A11:2009

+A1:2010+A12:2011

UGENE

, O

REGON

USA, U

PDATED

PRIL

, 2013

IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE CHARAC

TERISTICS OF INFORMATION TECHNOLOGY EQUIPMENTS

NFORMATION TECHNOLOGY EQUIPMENT

- I

MMUNITY CHARACTERISTICS

ITS AND METHODS OF MEASUREMENT

NFORMATION TECHNOLOGY EQUIPMENT

-S

AFETY

- P

ART

1 : G

ENERAL

EQUIREMENTS

RAD

EST

ICE

RESIDENT

- G

LOBAL

UPPLY

HAIN

PERATIONS

www.datalogic.com

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.

Datalogic ADC, Inc.

959 Terry Street

Eugene

OR 97402

USA

Telephone: (1) 541-683-5700

Fax: (1) 541-345-7140

820045514 (Rev. D) May 2013

નમસ્તે! હું એક AI ચેટબોટ છું જે ખાસ કરીને Datalogic Magellan 1100i Barcode Scanner Quick Reference Guide સાથે તમને સહાય કરવા માટે તાલીમ પામેલો છે. મેં દસ્તાવેજની સંપૂર્ણ સમીક્ષા કરી છે અને તમને જરૂરી ચોક્કસ માહિતી શોધવામાં અથવા સ્પષ્ટ અને સરળ શબ્દોમાં સામગ્રી સમજાવવામાં મદદ કરી શકું છું. પછી ભલે તમે ચોક્કસ સુવિધાઓ, મુશ્કેલીનિવારણ પગલાં અથવા સામાન્ય વપરાશ વિશે માર્ગદર્શન શોધી રહ્યા હોવ, તમારા પ્રશ્નો પૂછવા માટે નિઃસંકોચ રહો. તમે તમારી ચિંતાઓ અથવા જરૂરિયાતો વિશે જેટલી વધુ વિગતો પ્રદાન કરશો, તેટલી વધુ ચોક્કસ અને અસરકારક રીતે હું તમને સહાય કરી શકું છું!

સહાયક ટાઇપ કરી રહ્યા છે

સહાયક કીબોર્ડથી બહાર છે. કૃપા કરીને, પછીથી ફરી પ્રયાસ કરો.

સામગ્રીનું કોષ્ટક

એવું લાગે છે કે તમે એક એવા દસ્તાવેજ પર પહોંચી ગયા છો જે ઘણી ભાષાઓમાં લખાયેલ છે, જેમાં તમારી મૂળ ભાષા નથી. તમે તમારી પસંદગીની ભાષા વિનાના પૃષ્ઠોને અસ્થાયી રૂપે છુપાવવા માટે નીચેની લિંક્સનો ઉપયોગ કરી શકો છો.

જાહેરાત

Magellan

1100i

Omni-Directional Imaging Scanner

Quick Reference Guide — Guida Rapida

Guide de Référence Rapide — Guía de Referencia Rápida

Schnellanleitung — Referência Rápida

快速参考

—

クイック・リファレンス

Table of Contents

NOTES

DATALOGIC ADC, INC. MAGELLAN

LICENSE AGREEMENT

END USER

Quick Reference

Installation

Optional Stand

Power Supply

How to Scan

Targeted Scanning Mode

NOTE

Troubleshooting

Compliance Statement

Guida Rapida

Installazione

Supporto Opzionale

Alimentazione

Come utilizzare lo Scanner

Modalità di Scansione a Bersaglio

NOTE

Risoluzione dei Problemi

Dichiarazione di Conformità

Guía de Referencia Rápida

Instalación

Soporte Opcional

Suministro Eléctrico

Instrucciones Para Escanear

Modo de Exploración de Objetivo

NOTA

Solución de Problemas

Nota de Conformidad

Referência Rápida

Instalação

Suporte Opcional

Adaptador C.A / C.C.

Como Fazer Leitura

Modo de Leitura Direcionada

NOTA

Diagnóstico

Declaração de Conformidade

Guide de Référence Rapide

Installation

Support Facultatif

Alimentation Électrique

Comment Scanner

Mode Saisie Ciblée

NOTE

Diagnostic de Pannes

Déclaration de Conformité

Schnellanleitung

Installation

Optionaler Ständer

Stromversorgung

Scanverfahren

Zielscanmodus

HINWEIS

Fehlerbehebung

Erfüllung von Vorschriften

快速参考

安装

可选用机座

电源

怎样进行扫描

瞄准扫描模式

故障处理

符合法规声明

クイック・リファレンス

インストール

オプションのスタンド

電源