Trane BAYECON086B Dry Bulb Economizer Specification
Trane BAYECON086B is a programmable thermostat that offers precise temperature control and energy-saving features. It can be programmed with up to 4 daily periods, allowing you to customize your home's temperature settings to match your schedule. Additional features include a large, easy-to-read display, a filter change reminder, and compatibility with various HVAC systems.
Advertisement
Advertisement
Upflow/Downflow
Horizontal Right or Left
Gas-Fired Furnace
XT 80
TUD1A040A9H21B, TUD1B060A9H31B
TUD1B080A9H31B, TUD1C080A9H41B
TUD1B100A9H31B, TUD1C100A9H51B
TUD1D120A9H51B, TUD1D140A9H51B
TDD1B060A9H31B, TDD1B080A9H31B
TDD1C100A9H51B, TDD1D120A9H51B
Single Stage, High Efficiency Motor
Upflow / Horizontal*
Downflow / Horizontal*
*Horizontal Conversion for these furnaces may be left or right side rotation.
PUB. NO. 22-1779-08
General
Features
Natural Gas Models
Central heating furnace designs are certified by the American Gas Association for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National
Standards Institute standards.
Safe Operation
The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation.
Dual solenoid combination gas valve and regulator provide extra safety.
Quick Heating
Durable, cycle tested, heavy gauge
alu-
minized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure.
Burners
Multi-port In-shot burners will give years of quiet and efficient service. All models can be converted to
L.P. gas.
Integrated System Control
Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self-diagnostics for ease of service. Also contains connection points for E.A.C./humidifier.
Air Delivery
The multispeed, high efficiency, direct drive blower motor, with sufficient airflow range for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed.
Styling
Heavy gauge steel and “wrap-around” cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil faced fiberglass insulation.
This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass.
Features And General Operation
The XT80 High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constant burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access.
a. Low energy power venter.
b. Vent proving differential switch.
© 2013 Trane All Rights Reserved 2 22-1779-08
Contents
General Features 2
Features and Benefits
Standard Equipment
Optional Equipment
General Data 6
TUD1A040A9H21B 6
TUD1B060A9H31B 6
TUD1B080A9H31B 6
TUD1C080A9H41B 6
TUD1B100A9H31B 7
TUD1C100A9H51B 7
TUD1D120A9H51B 7
TUD1D140A9H51B 7
TDD1B060A9H31B 8
TDD1B080A9H31B 8
TDD1C100A9H51B 8
TDD1D120A9H51B 8
Performance Data
4
4
5
9
Electrical Data
Field Wiring
Twinning Field Wiring
12
16
17
Dimensions 18
22-1779-08 3
Features and
Benefits
XT80 Upflow/Downflow Horizontal Right or Left
Standard Equipment
• Convertible to horizontal with left or right airflow
• Power supply 115/1/60
• Silicon Nitride Hot surface igniter with adaptive heat up
• Integrated solid state control with selfdiagnostics
• Single wire twinning
• Attractive color accents
• Hinged blower door
• Perfect Fit door latches
• Insulated blower door
• Gasketed blower door
• Internal filter rack
• Standard filter sizes
• Cleanable high velocity filters
• Heavy gauge aluminized steel heat exchanger
• Blower door safety switch
• Constant torque ECM blower motor
• Multi-port In-shot burners
• Complete front service access
• Alternate bottom/left/right return air
• Slide out blower assembly
• High efficiency direct drive 4 speed motor
• Adjustable fan off times
• Common vent capability
• Heavy gauge reinforced wrap-around steel cabinet
• Optional L.P. conversion kit
• Left/right gas connection
• Accessory hook-up capability
• Selectable cooling fan off eliminates need for BAY24X045 time delay relay
• 24 volt fuse
• Manual reset flame roll-out switches
4 22-1779-08
Features and
Benefits
Optional Equipment
OPTIONAL EQUIPMENT FOR CONDENSING UNITS (Check mark [✓] indicates accessories included).
For Comfort Controls, See price book pages .............................................................................................................................. [ ]
CleanEffects
TM
Whole House Air Cleaner (14-1/2" Wide, Upflow / Side Return Furnace) ........................... TFD145ALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (17-1/2" Wide, Upflow / Side Return Furnace) ........................... TFD175ALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (21" Wide, Upflow / Side Return Furnace) ................................. TFD210ALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (24-1/2" Wide, Upflow / Side Return Furnace) ........................... TFD245ALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (14-1/2" Wide, Downflow Furnace) .............................................TFD14DALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (17-1/2" Wide, Downflow Furnace) .............................................TFD17DALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (21" Wide, Downflow Furnace) ...................................................TFD21DALFR000A [ ]
CleanEffects
TM
Whole House Air Cleaner (24-1/2" Wide, Downflow Furnace) .............................................TFD24DALFR000A [ ]
Electronic Air Filter, “Perfect Fit” Super Efficiency (14-1/2" Wide Gas Furnace)................................................... TFE145A9FR0 [ ]
Electronic Air Filter, “Perfect Fit” Super Efficiency (17-1/2" Wide Gas Furnace)................................................... TFE175A9FR0 [ ]
Electronic Air Filter, “Perfect Fit” Super Efficiency (21" Wide Gas Furnace) ......................................................... TFE210A9FR0 [ ]
Electronic Air Filter, “Perfect Fit” Super Efficiency (24-1/2" Wide Gas Furnace)................................................... TFE245A9FR0 [ ]
Air Filter, “Perfect Fit” High Efficiency (14-1/2" Wide Gas Furnace) .................................................................... TFM145A9FR0 [ ]
Air Filter, “Perfect Fit” High Efficiency (17-1/2" Wide Gas Furnace) .................................................................... TFM175A9FR0 [ ]
Air Filter, “Perfect Fit” High Efficiency (21" Wide Gas Furnace) ........................................................................... TFM210A9FR0 [ ]
Air Filter, “Perfect Fit” High Efficiency (24-1/2" Wide Gas Furnace) .................................................................... TFM245A9FR0 [ ]
Air Filter, “Perfect Fit” Standard Efficiency (14-1/2" Wide Gas Furnace) .............................................................. TFP145A9FR0 [ ]
Air Filter, “Perfect Fit” Standard Efficiency (17-1/2" Wide Gas Furnace) .............................................................. TFP175A9FR0 [ ]
Air Filter, “Perfect Fit” Standard Efficiency (21" Wide Gas Furnace) .................................................................... TFP210A9FR0 [ ]
Air Filter, “Perfect Fit” Standard Efficiency (24-1/2" Wide Gas Furnace) .............................................................. TFP245A9FR0 [ ]
Coil Enclosure (14-1/2" Wide Cabinets) ........................................................................................................ BAYCLE14A1422A [ ]
Coil Enclosure (17-1/2" Wide Cabinets) ........................................................................................................ BAYCLE17A1722A [ ]
Coil Enclosure (21" Wide Cabinets) .............................................................................................................. BAYCLE21A2130A [ ]
Coil Enclosure (24-1/2" Wide Cabinets) ........................................................................................................ BAYCLE24A2430A [ ]
High Altitude Switch ................................................................................................................................................ BAYHALT248 [ ]
Downflow Subbase .................................................................................................................................................BAYBASE205 [ ]
Propane Conversion Kit ........................................................................................................................................BAYLPKT210B [ ]
Propane Conversion Kit (With Stainless Steel burners) .......................................................................................BAYLPSS210B [ ]
Masonry Chimney Vent Kit (Upflow models only) ................................................................................................ BAYVENT800B [ ]
Filter Access Door Kit (Downflow models) ..............................................................................................................BAYFLTR206 [ ]
22-1779-08 5
General
Data
TUD1-H Product Specifications 1
TUD1A040A9H21B TUD1B060A9H31B TUD1B080A9H31B
MODEL
RATINGS2
Input BTUH
40000
Capacity BTUH (ICS) 3
AFUE
Temp. Rise (Min.-Max.) °F.
BLOWER DRIVE
Dia.-Width (In.)
No. Used
Speeds (No.)
CFM vs. in. w.g.
Motor HP 5
R.P.M.
Volts/Ph/Hz
FLA
COMBUSTION FAN — TYPE
Drive - No. Speeds
Motor HP - RPM
Volts/Ph/Hz
FL Amps
FILTER — Furnished?
Type Recommended
Filter (No.-Size-Thk.)
VENT — Size (In.)
HEAT EXCHANGER
Type -Fired
-Unfired
Gauge (Fired)
ORIFICES — Main
Nat. Gas. Qty. — Drill Size
L.P. Gas Qty. — Drill Size
GAS VALVE
DIRECT IGNITION DEVICE
Type
BURNERS — Type
Number
POWER CONN. — V/Ph/Hz4
Ampacity (In Amps)
Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DUCT CONN.
DIMENSIONS
Crated (In.)
Uncrated
WEIGHT
Shipping (Lbs.)/Net (Lbs.)
32000
80.0
30 - 60
DIRECT
10 x 6
1
4
SEE FAN PERF. TABLE
1/2
1080
115/1/60
6.8
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 14 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
2 - 45
2 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
2
115/1/60
10.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 16-1/2 X 30-1/2
SEE OUTLINE DRAWING
119/110
60000
47000
80.0
30 - 60
DIRECT
10 x 7
1
4
SEE FAN PERF. TABLE
1/2
1075
115/1/60
6.8
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 17 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
3 - 45
3 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
3
115/1/60
10.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 19-1/2 X 30-1/2
SEE OUTLINE DRAWING
136/126
80000
63000
80.0
30 - 60
DIRECT
10 x 8
1
4
SEE FAN PERF. TABLE
1/2
1075
115/1/60
6.8
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 17 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
4 - 45
4 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
4
115/1/60
10.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 19-1/2 X 30-1/2
SEE OUTLINE DRAWING
142/132
TUD1C080A9H41B
80000
64000
80.0
30 - 60
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
3/4
1100
115/1/60
8.4
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 20 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
4 - 45
4 - 56
REDUNDANT - SINGLE STAGE
1
Central Furnace heating designs are certified to ANSI Z21.47 / CSA 2.3.
2
For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.
For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level.
3
Based on U.S. government standard tests.
4
The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.
5
Constant torque ECM blower motor.
HOT SURFACE
IN-SHOT
4
115/1/60
12.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 23 X 30-1/2
SEE OUTLINE DRAWING
162/151
6 22-1779-08
General
Data
MODEL
RATINGS2
Input BTUH
TUD1-H Product Specifications 1
TUD1B100A9H31B TUD1C100A9H51B TUD1D120A9H51B
TUD1D140A9H51B
100000 100000 120000 140000
Capacity BTUH (ICS)3
AFUE
Temp. Rise (Min.-Max.) °F.
BLOWER DRIVE
Dia.-Width (In.)
No. Used
Speeds (No.)
CFM vs. in. w.g.
Motor HP 5
R.P.M.
Volts/Ph/Hz
FLA
COMBUSTION FAN — TYPE
Drive - No. Speeds
Motor HP - RPM
Volts/Ph/Hz
FL Amps
FILTER — Furnished?
Type Recommended
Filter (No.-Size-Thk.)
VENT — Size (In.)
HEAT EXCHANGER
Type -Fired
-Unfired
Gauge (Fired)
ORIFICES — Main
Nat. Gas. Qty. — Drill Size
L.P. Gas Qty. — Drill Size
GAS VALVE
DIRECT IGNITION DEVICE
Type
BURNERS — Type
Number
POWER CONN. — V/Ph/Hz4
Ampacity (In Amps)
Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DUCT CONN.
DIMENSIONS
Crated (In.)
Uncrated
WEIGHT
Shipping (Lbs.)/Net (Lbs.)
80000
80.0
40 - 70
DIRECT
10 x 8
1
4
SEE FAN PERF. TABLE
3/4
1075
115/1/60
8.4
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 17 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
5 - 45
5 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
5
115/1/60
12.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 19-1/2 X 30-1/2
SEE OUTLINE DRAWING
153/143
79000
80.0
30 - 60
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
1
1075
115/1/60
10.9
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 20 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
5 - 45
5 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
5
115/1/60
15.4
20
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 23 X 30-1/2
SEE OUTLINE DRAWING
96000
80.0
30 - 60
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
1
1075
115/1/60
10.9
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 24 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
20
6 - 45
6 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
6
115/1/60
15.4
20
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 26-1/2 X 30-1/2
SEE OUTLINE DRAWING
80.0
40 - 70
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
1
1075
115/1/60
10.9
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
1 - 24 X 25 - 1 IN.
4 ROUND
ALUMINIZED STEEL TYPE 1
7 - 45
7 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
7
115/1/60
15.4
20
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 26-1/2 X 30-1/2
SEE OUTLINE DRAWING
162/151 186/174
1
Central Furnace heating designs are certified to ANSI Z21.47 / CSA 2.3.
2
For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.
For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level.
3
Based on U.S. government standard tests.
4
The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.
5
Constant torque ECM blower motor.
111000
20
193/181
22-1779-08 7
General
Data
TDD1-H Product Specifications 1
MODEL
RATINGS2
Input BTUH
Capacity BTUH (ICS)3
AFUE
Temp. Rise (Min.-Max.) °F.
BLOWER DRIVE
Dia.-Width (In.)
No. Used
Speeds (No.)
CFM vs. in. w.g.
Motor HP 5
R.P.M.
Volts/Ph/Hz
FLA
COMBUSTION FAN — TYPE
Drive - No. Speeds
Motor HP - RPM
Volts/Ph/Hz
FL Amps
FILTER — Furnished?
Type Recommended
Filter (No.-Size-Thk.)
VENT — Size (In.)
HEAT EXCHANGER
Type -Fired
-Unfired
Gauge (Fired)
ORIFICES — Main
Nat. Gas. Qty. — Drill Size
L.P. Gas Qty. — Drill Size
GAS VALVE
DIRECT IGNITION DEVICE
Type
BURNERS — Type
Number
POWER CONN. — V/Ph/Hz4
Ampacity (In Amps)
Max. Overcurrent Protection (Amps)
PIPE CONN. SIZE (IN.)
DUCT CONN.
DIMENSIONS
Crated (In.)
Uncrated
WEIGHT
Shipping (Lbs.)/Net (Lbs.)
TDD1B060A9H31B
60000
48000
80.0
25 - 55
DIRECT
10 x 7
1
4
SEE FAN PERF. TABLE
1/2
1075
115/1/60
6.8
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
2 - 14 X 20 - 1 IN
4 ROUND
ALUMINIZED STEEL TYPE 1
20
3 - 45
3 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
3
115/1/60
10.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41 X 19-1/2 X 29-1/2
SEE OUTLINE DRAWING
TDD1B080AH931B
80000
64000
80.0
35 - 65
DIRECT
10 x 8
1
4
SEE FAN PERF. TABLE
1/2
1075
115/1/60
6.8
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
2 - 14 X 20 - 1 IN
4 ROUND
ALUMINIZED STEEL TYPE 1
20
4 - 45
4 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
4
115/1/60
10.3
15
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 18-1/2 X 29-1/2
SEE OUTLINE DRAWING
TDD1C100A9H51B
100000
81000
80.0
30 - 60
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
1
1075
115/1/60
10.9
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
2 - 16 X 20 - 1 IN
4 ROUND
ALUMINIZED STEEL TYPE 1
20
5 - 45
5 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
5
115/1/60
15.4
20
1/2
SEE OUTLINE DRAWING
H X W X D
41-3/4 X 22 X 29-1/2
SEE OUTLINE DRAWING
TDD1D120A9H51B
6 - 45
6 - 56
REDUNDANT - SINGLE STAGE
HOT SURFACE
IN-SHOT
6
115/1/60
15.4
20
1/2
SEE OUTLINE DRAWING
H X W X D
41 X 25-1/2 X 29-1/2
SEE OUTLINE DRAWING
136 / 126 146 / 135 167/155
1
Central Furnace heating designs are certified to ANSI Z21.47 / CSA 2.3.
2
For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.
For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level.
3
Based on U.S. government standard tests.
4
The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.
5
Constant torque ECM blower motor.
120000
96000
80.0
35 - 65
DIRECT
11 x 10
1
4
SEE FAN PERF. TABLE
1
1075
115/1/60
10.9
CENTRIFUGAL
DIRECT - 1
1/50 - 3180
115/1/60
1.09
Yes
High Velocity
2 - 16 X 20 - 1 IN
4 ROUND
ALUMINIZED STEEL TYPE 1
20
189 / 176
8 22-1779-08
Performance
Data
TUD1-H Airflow
FURNACE AIRFLOW (CFM) VS. STATIC PRESSURE (ins.w.g.)
MODEL SPEED TAP 0.1
0.2
0.3
0.4
*UD1A040A9H21B
*UD1B060A9H31B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1121
926
761
750
1360
1188
1040
942
1094
896
720
644
1329
1152
1003
873
1067
866
678
538
1298
1116
966
803
1039
837
648
499
1268
1089
931
771
*UD1B080A9H31B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1440
1249
1179
1048
1406
1219
1143
989
1372
1189
1106
929
1345
1158
1078
888
*UD1C080A9H41B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1755
1519
1369
1300
1717
1478
1265
1161
1678
1436
1161
1021
1639
1394
1115
965
*UD1B100A9H31B
*UD1C100A9H51B
*UD1D120A9H51B
*UD1D140A9H51B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1355
1258
1142
996
2154
1959
1778
1590
2091
1929
1712
1541
2096
1896
1711
1533
1380
1283
1176
1029
2195
1998
1813
1630
2119
1963
1751
1579
2130
1935
1752
1576
1330
1232
1108
962
2113
1919
1742
1550
2062
1895
1673
1502
2062
1857
1669
1490
1305
1204
1081
928
2076
1883
1703
1511
2029
1857
1638
1459
2023
1824
1632
1452
* May be "A" or "T"
0.6
0.7
983
783
583
415
955
757
548
371
1208
1031
861
699
1178
1000
826
659
1287
1091
1010
802
1255
1055
970
757
1561
1309
1023
860
1522
1267
978
810
1248
1144
1019
855
1216
1112
983
816
1992
1814
1630
1434
1945
1781
1595
1396
1959
1785
1566
1378
1921
1751
1529
1340
1952
1750
1551
1375
1919
1709
1507
1336
1280
1176
1054
894
2038
1847
1664
1471
1996
1818
1602
1416
0.5
1011
808
617
459
1238
1062
896
739
1318
1127
1050
847
1600
1351
1068
909
1984
1790
1594
1413
1191
1084
947
756
1876
1744
1560
1361
1887
1716
1490
1293
0.8
929
723
514
337
1147
962
787
619
1219
1019
929
708
1481
1225
925
754
1884
1673
1472
1295
1165
1056
911
696
1807
1706
1525
1325
1852
1681
1451
1246
0.9
902
689
479
303
1116
924
747
579
1183
982
887
658
1439
1182
871
697
1849
1636
1436
1254
1 Central Furnace heating designs are certified to ANSI Z21.47 / CSA 2.3.
2
For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level.
For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level.
3
Based on U.S. government standard tests.
4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.
22-1779-08 9
Performance
Data
TUD1-H CFM
CFM VS. TEMPERATURE RISE
CFM (CUBIC FEET PER MINUTE)
MODEL
*UD1A040A9H21B
400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
59 49 42 37 33 30
*UD1B060A9H31B 63 56 49 44 40 37 34 32 30
*UD1B080A9H31B
*UD1C080A9H41B
*UD1B100A9H31B
59
59
74
54
54
67
49
49
62
46
46
57
42
42
53
40
40
49
37
37
46
35
35
44
33
33
41
31
31
*UD1C100A9H51B
*UD1D120A9H51B
*UD1D140A9H51B
* May be "A" or "T"
62 57 53 49 46 44 41 39 37 35
59 56 52 49 47 44 42
69 65 61 58 55 52 49
TDD1-H CFM
MODEL
*DD1B060A9H31B
*DD1B080A9H31B
*DD1C100A9H51B
*DD1D120A9H51B
* May be "A" or "T"
CFM VS. TEMPERATURE RISE
CFM (CUBIC FEET PER MINUTE)
400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
56 49 44 40 37 34 32 30 28 26
66 59 54 49 46 42 40 37 35
62 57 53 49 46 44 41 39 37 35
68 63 59 56 52 49 47 44 42
10 22-1779-08
Performance
Data
TDD1-H Airflow
FURNACE AIRFLOW (CFM) VS. STATIC PRESSURE (ins.w.g.)
MODEL SPEED TAP 0.1
0.2
0.3
*DD1B060A9H31B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1449
1303
1182
1012
1415
1270
1150
974
1381
1236
1117
935
*DD1B080A9H31B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
1450
1302
1190
1033
1417
1269
1153
992
1393
1235
1115
951
*DD1C100A9H51B
*DD1D120A9H51B
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
4 - HIGH - Black
3 - MED-HIGH - Blue
2 - MED-LOW - Yellow
1 - LOW - Red
2170
1971
1766
1579
2171
1976
1770
1575
2126
1932
1720
1537
2128
1934
1730
1531
2082
1893
1674
1495
2085
1891
1690
1487
* May be "A" or "T"
2045
1855
1633
1447
2048
1856
1652
1446
0.4
1345
1202
1080
904
1349
1200
1079
912
2007
1816
1591
1399
2010
1820
1614
1404
0.5
1309
1167
1042
872
1314
1164
1042
873
1964
1771
1547
1352
1968
1781
1575
1363
0.6
0.7
1265
1133
1005
835
1220
1099
968
798
1272
1127
1009
832
1229
1089
976
791
1920
1726
1502
1304
1925
1741
1535
1321
1884
1688
1456
1250
1893
1704
1493
1277
0.8
1143
1054
933
760
1147
1041
934
729
1848
1649
1409
1196
1861
1666
1450
1233
0.9
1066
1009
897
721
1064
992
891
666
22-1779-08 11
Electrical
Data
TUD1-H Wiring Diagram For Gas Furnaces
From Dwg. D342489 Rev. 6
12 22-1779-08
Electrical
Data
TUD1-H Schematic Diagram For Gas Furnaces
22-1779-08 13
From Dwg. D341289 Rev. 6
Electrical
Data
TDD1-H Wiring Diagram For Gas Furnaces
From Dwg. D342490P03
14 22-1779-08
Electrical
Data
TDD1-H Schematic Diagram For Gas Furnaces
22-1779-08 15
From Dwg. D342490P03
Field
Wiring
SEE
NOTE 7
FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE
1 STAGE HEATING
USING A 1 STAGE HEATING THERMOSTAT
NO COOLING
FURNACE
TWIN
OUTDOOR UNIT
(NO TRANSFORMER)
B/C
SEE
NOTE 6
B/C
TO 115 V 1 PH.,
60 HZ., POWER
SUPPLY PER
LOCAL CODES
HUM SEE
NOTE 5
EAC SEE
NOTE 5
From Dwg. B341437 Rev. 1
FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE
1 STAGE HEATING, 1 STAGE COOLING
USING A 1 STAGE HEATING, 1 STAGE COOLING THERMOSTAT
(OUTDOOR SECTION WITHOUT TRANSFORMER)
FURNACE
SEE
NOTE 6
B/C
SEE
NOTE 8
B/C
TO 115 V 1 PH.,
60 HZ., POWER
SUPPLY PER
LOCAL CODES
HUM SEE
NOTE 5
EAC SEE
NOTE 5
From Dwg. B340388 Rev. 2
16 22-1779-08
Twinning
Field Wiring
1 STAGE HEAT
ONLY
THERMOSTAT
(WITH FAN SWITCH) FURNACE NO. 1
TWINNING CONNECTION DIAGRAM
FOR TWINNING 1 STAGE FURNACES WITH
SINGLE WIRE TWINNING FEATURE
1 STAGE HEATING ONLY THERMOSTAT
TWIN
FURNACE NO. 2
BLOWER OPERATION OF
UNIT NO. 2 IS SYNCRONIZED
WITH UNIT NO. 1 VIA SIGNALS
FROM TWIN CONNECTION.
TWIN
ISOLATION RELAY
(FIELD SUPPLIED)
SEE NOTE 4
R1
SEE NOTE 4
R1
ISOLATION RELAY
SEE NOTE 4
OUTDOOR UNIT
(WITH TRANSFORMER)
B/C
SEE NOTE 3
B/C B/C
1 STAGE
HEATING / COOLING
THERMOSTAT
TWINNING CONNECTION DIAGRAM
FOR TWINNING 1 STAGE FURNACES WITH
SINGLE WIRE TWINNING FEATURE
1 STAGE HEAT / 1 STAGE COOL THERMOSTAT
FURNACE NO. 1
TWIN
FURNACE NO. 2
BLOWER OPERATION OF
UNIT NO. 2 IS SYNCRONIZED
WITH UNIT NO. 1 VIA SIGNALS
FROM TWIN CONNECTION.
TWIN
ISOLATION RELAY
(FIELD SUPPLIED)
SEE NOTE 3
OUTDOOR UNIT
(NO TRANSFORMER)
SEE NOTE 4
R1
ISOLATION RELAY
SEE NOTE 4
From Dwg. 21B341422 Rev. 3
B/C
SEE NOTE 5
B/C
R1
ISOLATION RELAY
(FIELD SUPPLIED)
SEE NOTE 4
B/C
22-1779-08 17
From Dwg. 21B341423 Rev. 2
Dimensions
18 22-1779-08
Dimensions
22-1779-08 19
Trane
6200 Troup Highway
Tyler, TX 75707 www.trane.com
06/13
Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice.
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement