User Manual
RD119
1U Dual Slide LCD Console Drawer
Options :
» AV / DVI-D / HDMI / Audio
» Full Range of Integrated KVMs
» DC power
Contents
1-1 Package Content
1-2 Structure Diagram
1-3 Dimensions & Weight
2-1 Before Installation
2-2 Unpacking
2-3 How To Clean Your LCD Monitor
2-4 How To Install
2-5 Connecting to a PS/2 or USB Server
2-6 Connecting to an External KVM Switch
3-1 Opening the Drawer
3-2 On-screen Display Operation (OSD)
4-1 Specifications Table
4-2 Keyboard / Mouse Specifications
5-1 Port Options
5-2 DC Power Options
IP Enabled KVM Switches
High Density CATx KVMs
Basic Cabled Style KVMs
Specialty KVMs
Warranty Information
What the Warranty Does Not Cover
Regulatory Notices Federal Communications Commission (FCC)
Legal Information
ii
3
4
3
3
5
5
1
1
2
11
11
12
12
12
12
13
14
14
14
8
10
6
7
iii
Safety Notice
Please read the following before using your Raloy unit:
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment wit temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to people nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep the unit from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent the unit from potentially being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
1
1 Product Overview
1-1 Package Content
1 x RNX119 Rackmount Console
1 x RCE-6 6ft Combo KVM cable
1 x Power cord
8 x M6 screw, cage nut & cup washer
The above package content is only for the single console models. Options such as KVM, HDMI, DVI-D, AV, audio & DC power may cause package contents to change.
1-2 Structure Diagram
5
1
2
3
4
5
8
9
6
7
1
2
3
4
5
Carry handle to release the 2-pt lock
LCD interchangeable module kit
Installation Slides
LCD membrane
Membrane switch (KVM option)
6
7
8
9
Audio speaker ( for HDMI or Audio option )
Keyboard interchangeable module kit
Touchpad mouse module
1U dual slide for LCD console drawer
1-3 Dimensions & Weight
Front View
UNIT : mm
1mm = 0.03937 inch
Side View
Top View
2
Model
RNX119 Series
Product Dimension
(W x D x H)
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73"
Packing Dimension
(W x D x H)
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
Net Weight
13.2 kg
29 lb
Gross Weight
The weight listed is only for the single console drawer. Weight will vary depending on additional accessories & options such as Integrated KVM, HDMI, DVI-D, AV, audio & DC power.
19 kg
41.8 lb
3
2 Installation
2-1 Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.
2-2 Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
2-3 How To Clean Your LCD Monitor
Caution. Read this before cleaning:
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1. Disconnect the power cord.
2. Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1. Disconnect the power cord.
2. Spray a small amount of non-abrasive cleanser on a microfiber cloth.
3. Gently wipe the surface. Use as little pressure as possible.
4. Wait until your monitor is completely dry before plugging it in and powering it up.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.
2-4 How To Install
Step 1
■ Insert the left and right rear mounting brackets into the
LCD console drawer.
Step 2
■ Measure the depth of the front and rear mounting rails.
■ Align each rear mounting bracket to a suitable length.
Step 3
■ Fix the LCD console drawer into the rack using the included M6 screws, cage nuts & cup washers
4
2-5 Connecting to a PS/2 or USB Server
LCD console drawer
KVM
RCE-6 Combo
KVM cable
LCD console drawer
KVM
RCE-6 Combo
KVM cable
PS/2 server USB server
2-6 Connecting to an External KVM Switch
LCD console drawer
KVM
RCE-6 Combo
KVM cable
LCD console drawer
KVM
RCE-6 Combo
KVM cable
PS/2 console KVM USB console KVM
Caution: The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.
5
6
3 Basic Operation
3-1 Opening the Drawer
Step
1
■ Press the handle button and gently side out the drawer.
Step 2
■ Flip up the LCD to a suitable angle.
Step 3
■ Operate the LCD console drawer.
3-2 Closing the Drawer
Step 1
■ Flip down the LCD panel.
Step 2
■ Press the handle button and gently push back the drawer into the rack.
Step 3
■ Return the LCD drawer to park position.
7
3-3 On-screen Display Operation (OSD)
Power light
Green = On
Orange = Power saving
Membrane Switch Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
8
OSD Configuration Page
Image: for the brightness, contrast, color temp, red, green, and blue
Geometry: for the auto adjust, H position, V position, phase and clock
Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio: for volume, bass, treble, balance, AVL and mute
Misc: for the language, OSD position, graphic mode, ratio, reset and timer
9
4 Product Specifications
4-1 Specifications Table
LCD
Panel
Manufacturer
Panel Size ( diagonal )
Display pixel ( dots x lines )
Brightness ( typ. )
Contrast Ratio ( typ. )
Color
Viewing Angle ( L/R/U/D )
Response Time ( ms )
Dot pitch ( mm )
Display Area ( mm )
Surface treatment
Surface hardness
Backlight Type
MTBF ( hrs )
19-inch TFT color LCD
1280 x 1024
250
1000:1
16.7 M
85/85/80/80
5
0.294
376.32H x 301.06V
Haze 25%, Hard-coating
3H
LED
30,000
Video
Connectivity
Digital
Analog
HDMI 1.1, CEA-861-D
DVI-D, TMDS single link
Analog 0.7Vp-p
NTSC & PAL
NTSC & PAL
VESA EDID structure 1.3
Separate, Composite & SOG
Plug & Play
Synchronization
Audio
Connectivity
Audio Input
Audio Output
3.5mm stereo jack
30kΩ / 750mV
3.5mm stereo jack
30kΩ / 2.8V
Speaker Output 2 x 2W
*When the audio output is connected, speaker output is OFF
Power Power Supply Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption 25W or less
4W or less
1W or less
Regulatory Safety
Environmental cUL, FCC & CE certified
RoHS2 & REACH compliant
Environmental
Conditions
Physical
Specification
Applicable
Format
Operating
Storage
Temperature
Humidity
Temperature
Humidity
Shock
Vibration
Product ( W x D x H )
Packing ( W x D x H )
Net Weight
Gross Weight
VGA Input PC Signal
0 to 50°C degree
20~90%, non-condensing
-5 to 60°C degree
5~90%, non-condensing
10G acceleration (11ms duration)
5~500Hz 1G RMS random
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
13.2 kgs / 29 lbs
19 kgs / 41.8 lbs
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
10
4-2 Keyboard / Mouse Specifications
Ge
G keyboard integrated with touchpad
Key force
Travelling distance
Switch life
Software support
Supporting layouts
55 ± 5g
3 ± 0.3mm
> 10 million life cycle time
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC / Linux / Mac
America
United States
EMEA
Asia
United Kingdom Germany
Italy
China
Russia
Japan
France Spain Norway
Switzerland Netherlands Portugal
Korea Arabia Turkey
11
P.8
5 Product Options
5-1 Port Options
■ HDMI
■ DVI-D
■ AV
■ Audio
(HDMI 1.1, CEA-861-D)
(DVI-D TMDS single link)
(S-Video + Composite, BNC)
(3.5mm audio jacks for audio in & out, and 2W + 2WW Speakers
■ For dual slide 1U / 2U LCD console drawer, the user can only select one of the above four options.
Power
Audio in - in - out
PC Video
S-Video BNC
5-2 DC Power Options
12V Model
Input rating
Input voltage:
Input range:
Input current
- No load
- Full load
Output rating
Output voltage:
Output current:
Efficiency
DC Power
12-Volt
9 ~ 18V
50 mA
4950 mA
12-Volt
4.16A
84%
24V
24-Volt
18 ~ 36V
50 mA
2450 mA
12-Volt
4.16A
85%
HDMI
KVM
DVI-D
48V
48-Volt
36 ~ 75V
50 mA
1220 mA
12-Volt
4.16A
85%
KVM
For DC power option :
■ Option excludes 1 x power cord and 1 x AC power adapter.
12
6 Integrated KVM Options
IP Enabled KVM Switches
■ CATx Style
■ Basic Cabled Style
High Density CATx KVMs
■ Multi-User Matrix
■ Single User
Basic Cabled Style KVMs
■ Multi-User Matrix
■ Single User
Specialty KVMs
■ DVI-D + Audio
■ With USB Hub
Data Sheet www.Raloy.com/support/downloads.html
Product Manual www.Raloy.com/support/downloads.html
Data Sheet www.Raloy.com/support/downloads.html
Product Manual www.Raloy.com/support/downloads.html
Data Sheet www.Raloy.com/support/downloads.html
Product Manual www.Raloy.com/support/downloads.html
Data Sheet www.Raloy.com/support/downloads.html
Product Manual www.Raloy.com/support/downloads.html
13
7 Important Information
Warranty Information
I. Raloy Limited Warranty
Raloy Customer Support warrants to the original retail purchaser that this product is and will be free from defects in materials and workmanship for a period of twenty-four (24) months from date of purchase. During the warranty period, the purchaser must promptly contact Raloy Tech Support for assistance to report a unit failure.
II. Warranty Period
1. The standard warranty period is 24 months commencing from the date of your Raloy invoice.
2. For Touch Screen and High Brightness LCD custom units, the standard warranty period is 15 months commencing from the date of your Raloy invoice.
3. Warranty will be void if any of these cases apply: physical damages by accident, natural disaster, neglect, misuse or improper use of the equipment.
III. Product Return Procedure
Please see the Raloy website at www.raloy.com/support/raloy-product-warranty.html
for detailed product return information.
IV. Raloy Extended Warranty
Raloy also provides the option to extend your warranty service up to 60 Months, please contact our sales at [email protected]
for more warranty service and upgrade details.
Disclaimer of Warranty
EXCEPT AS SPECIFICALLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW,
RALOY DISCLAIMS ALL WARRANTIES AND CONDITIONS WHETHER EXPRESSED, IMPLIED, OR
STATUTORY AS TO ANY MATTER WHATSOEVER INCLUDING, WITHOUT LIMITATION, TITLE, NON-
INFRINGEMENT, CONDITION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR OR INTENDED
PURPOSE. EXCEPT AS EXPRESSLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY
LAW, RALOY SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
(INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF INFORMATION,
FINANCIAL LOSS, PERSONAL INJURY, LOSS OF PRIVACY OR NEGLIGENCE) WHICH MAY BE CAUSED
BY OR RELATED TO, DIRECTLY OR INDIRECTLY, THE USE OF A PRODUCT OR SERVICE, THE
INABILITY TO USE A PRODUCT OR SERVICE, INADEQUACY OF A PRODUCT OR SERVICE FOR ANY
PURPOSE OR USE THEREOF OR BY ANY DEFECT OR DEFICIENCY THEREIN EVEN IF RALOY OR AN
AUTHORIZED RALOY RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSSES.
Visit www.Raloy.com
for full warranty information.
14
What the Warranty Does Not Cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
■ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
■ Repair or attempted repair by anyone not authorized by us.
■ Any damage of the product due to shipment.
■ Removal or installation of the product.
■ Causes external to the product, such as electric power fluctuation or failure.
■ Use of supplies or parts not meeting our specifications.
■ Normal wear and tear.
■ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Legal Information
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
15
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2014 Raloy. All rights reserved.
