User Manual
Basic Style KVM Switch
1U KVM Switch with DB-15 Connections
Options :
» KVM Over IP
»
» 8 or 16 port
»
Remote Console
Single or Multi-User
II
Contents
1-1 Package Content (Standalone KVM)
1-2 Package Content (Integrated KVM)
1-3 Basic Style KVM Table
2-1 Before Installation
2-2 Unpacking the Unit
2-3 Installation Instructions (Standalone KVM)
2-4 KVM Port & CATx Dongle Connection
2-5 Cascading the KVM
2-6 Local and Remote Console Diagram
2-7 Connecting a Remote Console
3-1 KVM Button
3-2 Password
3-3 On-Screen Display (OSD)
3-4 IP Operations
3-5 Hotkeys for KVM & Remote Console
4-1 Specifications Table
4-2 DC Power: 12V, 24V, 48V Input
Warranty Information
What the Warranty Does Not Cover
Regulatory Notices Federal Communications Commission (FCC)
Legal Information
12
13
10
11
8
9
11
14
15
15
15
1
1
2
5
6
7
3
4
3
3
iii
Safety Notice
Please read the following before using your Raloy unit:
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
1 Product Overview
1-1 Package Content (Standalone KVM)
Remote
Cat6
Console
Remote
Cat6
Console
KVM unit
■ 1 x KVM Unit
■ 1 x Mounting set w/ bracket & screws
■ 1 x Power cord (for KVM)
Local
USB console
CAT 5 / 6 cable max. 150m
KVM unit
Receiver
KVM with Remote User
■ 1 x KVM Unit
■ 1 x Mounting set w/ bracket & screws
■ 1 x Power cord (for KVM)
■ 1 x Power adapter with power cord (for receiver)
■ 1 x RCE-6 6ft combo KVM cable for receiver
Local
USB console
1-2 Package Content (Integrated KVM)
CAT 5 / 6 cable max. 150m
KVM unit
Receiver
■ 1 x KVM Unit
KVM with Remote User
■ 1 x KVM Unit
■ 1 x Receiver box for remote console
■ 1 x Power adapter with power cord (for receiver)
■ 1 x RCE-6 6ft combo KVM cable for receiver
1
1-3 Basic Style KVM Table
www.Raloy.com/support/downloads.html
Multi-User Matrix Part Numbers
KVM21016*
KVM31116*
KVM32016*
KVM42116*
KVM41216*
KVM43016*
Concurrent Users Local
3
4
2
3
4
4
Single User Part Numbers Concurrent Users Local
KVM10008*
KVM10016*
KVM10108*
KVM10116*
1
1
1
1
KVM11008*
KVM11016*
1
1
* Replace with either an e for the touchpad or b for the trackball. i.e. RNX119-KVM10108e
1
1
1
1
1
1
1
1
1
1
1
1
Remote
2
2
1
1
1
3
Remote
0
0
0
0
1
1
1
1
0
0
0
0
0
1
0
1
2
0
Ports
16
16
16
16
16
16
Ports
8
16
8
16
8
16
2
3
2 Installation
2-1 Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.
2-2 Unpacking the Unit
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact Raloy immediately.
2-3 Installation Instructions (Standalone KVM)
A
B
Step 1
■ Install each bracket using the screws provided.
Screw A: 2 pcs Screw B: 8 pcs
M3.2 x 4.5 mm M4 x 10 mm
Step 2
■ Mount the KVM into the rack.
2-4 KVM Port & CATx Dongle Connection
CE-6 / CE-10 / CE-15
■
6 / 10 / 15 ft Combo KVM cable
■
Support PS/2 or USB server
RDB-15 Combo KVM port
USB Servers
PS/2 Servers
RCE - 6 / 10 / 15 Combo KVM cable support PS/2 or USB server
RCE-6 / RCE-10 / RCE-15 Combo KVM Cable
■ 6 / 10 / 15 ft. Combo KVM cable
■ Supports PS/2 or USB server
4
2-5 Cascading the KVM
Raloy KVMs CATx10008 / CATx10016 / CATx10032 can be cascaded.
■ Cascade up to 8 levels (256 servers max)
■ Cascade multiple KVM Switches with RCBC-6 cascade cable.
RCBC-6
■ 6ft Combo KVM cascade cable
Master KVM
Slave KVM level 2
Slave KVM level 3
Cascade
To console VGA port
Slave KVM level 4
Slave KVM level 5
Slave KVM level 6
Slave KVM level 7
Slave KVM level 8
When multiple CATx KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
5
2-6 Local and Remote Console Diagram
6
7
2-7 Connecting a Remote Console
Receiver
Front
Local
Computer Monitor
Rear
USB
K/B Mouse
Remote I/O
Local
Button to
PC
Remote
Button to
KVM switch
Power
The receiver provides a hotkey function for remote console.
Local computer
( Optional setup )
RCE-6
Combo
KVM cable
Monitor
VGA cable
Remote
Console
Cat6 cable up to 150m
12V DC Power
Adapter
Front
Rear
8
3 Operation
3-1 KVM Button
Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Power ON sequence
1. Turn on Rack Monitor (if applicable)
2. Turn on KVM switch
3. Turn on Servers
Front Panel - Port LED Indications
8 ports
16 ports
Bank no.
32 ports
Bank no.
PC port LEDs
Channel button
Bank button
PC port LEDs Channel button
Bank button
7-Segment BANK LED indication
Online : Blue LED on indicating a PC is connecting to the port
Active : Green LED on indicating a selected channel
Press to select channel from 01 to 32
Select the bank from 1 to 8
3-2 Password
The password is enabled by default. The default password is “00000000” (Do not use “0” on number pad)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout of the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” in both the user name & password fields (Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
5. Note: The system will automatically logout after 10 minutes of inactivity
■ Set your own user name & password
1. Login to the KVM on the SUPERVISOR level by entering “00000000” in user name & password fields
2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to access the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes a. Note: Blank has underscore, while SPACE doesn’t have one b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character
■ Change your password
1. Login to the KVM in SUPERVISOR level by entering your user name & password
2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to access the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes a. Note: Blank has underscore, while SPACE doesn’t have b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character
■ Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout of the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu
■ Forgot your password
Please contact your supplier for further support
Please Note:
■ You must press the KVM hotkey within 2 seconds
■ A beep sound will be heard upon pressing KVM hotkey
9
3-3 On-Screen Display (OSD)
OSD Menu
OSD operation
next to the system name
next to the system name
F1
F2
F3
Esc
Enter
PgUp/PgDn
1 / 2 / 3 / 4
The PC is powered on
The PC is selected
Access F1 MAIN MENU
Logout of the OSD menu
Previous menu
Cancel / Quit
Complete / Switch to selected port
Switch to previous or next port
Switch to previous bank or next bank
Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32
Remark: Display port 17 ~ 32 for 32 port model only
F1 Main Menu
10
01 LANGUAGE
02 PORT NAME EDIT
03 PORT SEARCH
04 USER SECURITY
05 ACCESS LIST
06 HOTKEY
07 TIME SETTINGS
08 OSD MOUSE
OSD language change
Define port name
Quick searching by port name
Change password
Define user access authority
Change hotkey
Modify scan display time interval
Modify OSD mouse speed
3-4 IP Operations
Please refer to the IP Manual for information on how to set-up and use the IP functions on compatible Raloy
KVM Switches. The IP Manual can be found at www.Raloy.com/files/Raloy-KVM-IP-Manual.pdf
3-5 Hotkeys for KVM & Remote Console
Local Console Hotkey
Scroll Lock + Scroll Lock + Space Bar
Function
Calling OSD menu
Right-button mouse + Esc
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock +
Scroll Lock + Scroll Lock + PgUp / PgDn
Calling OSD menu
Switch to previous port
Switch to next port
Switch to previous bank or next bank
Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port
Scroll Lock + Scroll Lock + B
Turn the buzzer ON and OFF
* Default the buzzer is ON
Scroll Lock + Scroll Lock + P
Logout the KVM if password security is ON.
Show up the status windows
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock + S
Scroll Lock + Scroll Lock + R
Scroll Lock + Scroll Lock + U
Scroll Lock + Scroll Lock + L
Activate auto-scan mode for connected servers
*Press any key to exit the auto-scan mode
Reset all the KVM settings to factory default
*Except User Security settings
Disable and enable password security
*Default security is ON
To enable / disable the screen saving function and 10 minutes auto-logout
*Default the screen saving is OFF
Note:
■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”
■ Bank No. : 1 to 8
■ Port No. : 01 to 32
■ e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4
■ e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6
■ You must press the hotkey within 2 seconds
■ A beep sound will be heard for successful entering
■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and
Enter keys are supported
Remote Console Hotkey
Scroll Lock + Scroll Lock + C
Scroll Lock + Scroll Lock + Q
Scroll Lock + Scroll Lock + S
Scroll Lock + Scroll Lock + A
Function
Toggle switch between remote & local port
Turn the buzzer ON & OFF
*Default the buzzer is ON
Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds
Auto-adjust the video signal
11
4 Product Specifications
4-1 Specifications Table
Product Information
Packaging Information
Dimensions (W x D x H)
Gross Weight
Dimensions (W x D x H)
Gross Weight
443 x 171 x 44 mm (17.4 x 6.7 x 1.73 in.)
5.5 lbs / 2.5 kg
500 x 400 x 90 mm (19.7 x 15.7 x 3.5 in.)
9 lbs / 4.1 kg
Environmental
KVM
Local Console
Operating Temperature
Storage Temperature
Relative Humidity
Shock
Vibration
Number of Ports
Connector
Connectivity
0 to 50 °C (32 to 122 °F)
-5 to 60 °C (23 to 140 °F)
90% non-condensing
50G peak acceleration (11ms, half-sine wave)
58~100Hz / 0.98G (11ms / cycle)
8, 16
DB-15 Combo
Combo 4-in-1 KVM Cable
Up to 6, 10, and 15 feet
1 x DB-15 VGA
Up to 1600 x 1200
2 x USB type A (keyboard & mouse)
Remote Console
IP Remote Console
Compatibility
Power
Regulatory
Graphic Connector
Resolution
Input Device
Connector
Resolution
Input Device
Remote I/O
Compensation
Connector
User Management
Network Protocol
Security
Resolution
Browser
Multi-Platform
Support
Input
Option DC
Consumption
Safety
Environment
1 x DB-15 VGA
Up to 1600 x 1200 (500ft.);
Up to 1024 x 768 (1000ft.)
2 x USB type A (keyboard & mouse)
RJ45 via CAT6/CAT5e/CAT5 cable up to 500 feet
Auto adjusts for cable length
RJ45 Ethernet
15-user login; 1 active user
DHCP / BOOTP / DNS
SSL v3, RSA, AES, HTTP / HTTPs, CSR
Up to 1600 x 1200
IE, Firefox, Safari, Netscape
Mix PCs, SUN and Mac G3 / G4 Mac / iMac
Windows 7 / Vista / 2003 / XP, Linux, Unix
Auto sensing 11 to 240VAC, 50/60 Hz; or AC / DC power adapter [email protected] (optional)
12V / 24V / 48V DC input
Max. 24W; Standby 5W cUL, FCC, CE
RoHS2, REACH
12
4-2 DC Power: 12V, 24V, 48V Input
Model
Input rating
Input voltage:
Input range:
Input current
- No load
- Full load
Output rating
Output voltage:
Output current:
Efficiency
12V
12-Volt
9 ~ 18V
50 mA
4950 mA
12-Volt
4.16A
84%
24V
24-Volt
18 ~ 36V
50 mA
2450 mA
12-Volt
4.16A
85%
48V
48-Volt
36 ~ 75V
50 mA
1220 mA
12-Volt
4.16A
85%
13
5 Important Information
Warranty Information
I. Raloy Limited Warranty
Raloy Customer Support warrants to the original retail purchaser that this product is and will be free from defects in materials and workmanship for a period of twenty-four (24) months from date of purchase. During the warranty period, the purchaser must promptly contact Raloy Tech Support for assistance to report a unit failure.
II. Warranty Period
1. The standard warranty period is 24 months commencing from the date of your Raloy invoice.
2. For Touch Screen and High Brightness LCD custom units, the standard warranty period is 15 months commencing from the date of your Raloy invoice.
3. Warranty will be void if any of these cases apply: physical damages by accident, natural disaster, neglect, misuse or improper use of the equipment.
III. Product Return Procedure
Please see the Raloy website at www.raloy.com/support/raloy-product-warranty.html
for detailed product return information.
IV. Raloy Extended Warranty
Raloy also provides the option to extend your warranty service up to 60 Months, please contact our sales at [email protected]
for more warranty service and upgrade details.
Disclaimer of Warranty
EXCEPT AS SPECIFICALLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW,
RALOY DISCLAIMS ALL WARRANTIES AND CONDITIONS WHETHER EXPRESSED, IMPLIED, OR
STATUTORY AS TO ANY MATTER WHATSOEVER INCLUDING, WITHOUT LIMITATION, TITLE, NON-
INFRINGEMENT, CONDITION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR OR INTENDED
PURPOSE. EXCEPT AS EXPRESSLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY
LAW, RALOY SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
(INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF INFORMATION,
FINANCIAL LOSS, PERSONAL INJURY, LOSS OF PRIVACY OR NEGLIGENCE) WHICH MAY BE CAUSED
BY OR RELATED TO, DIRECTLY OR INDIRECTLY, THE USE OF A PRODUCT OR SERVICE, THE
INABILITY TO USE A PRODUCT OR SERVICE, INADEQUACY OF A PRODUCT OR SERVICE FOR ANY
PURPOSE OR USE THEREOF OR BY ANY DEFECT OR DEFICIENCY THEREIN EVEN IF RALOY OR AN
AUTHORIZED RALOY RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSSES.
Visit www.Raloy.com
for full warranty information.
14
What the Warranty Does Not Cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
■ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
■ Repair or attempted repair by anyone not authorized by us.
■ Any damage of the product due to shipment.
■ Removal or installation of the product.
■ Causes external to the product, such as electric power fluctuation or failure.
■ Use of supplies or parts not meeting our specifications.
■ Normal wear and tear.
■ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Legal Information
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
15
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2014 Raloy. All rights reserved.
