Pentax QS-1 Digital Camera Operating Manual

PDF

Dokumentti

Mainos

QS1-SG-EN.book Page i Friday, August 8, 2014 8:51 AM

Digital Camera

Start Guide

Thank you for purchasing the PENTAX Q-S1 digital camera.

This Start Guide provides information on how to get your PENTAX Q-S1 ready for use and its basic operations. To ensure proper operation, please read this Start Guide before using the camera.

For details on how to use the various shooting methods and settings, please refer to the

Operating Manual (PDF) posted on our website.

Refer to p.48 for details on the Operating Manual.

QS1-SG-EN.book Page ii Friday, August 8, 2014 8:51 AM

Checking the Contents of the Package

Hot shoe cover F

(Installed on camera)

Q body mount cover

(Installed on camera)

Strap

O-ST131

Rechargeable lithium-ion battery D-LI68

Battery charger

D-BC68P

AC plug cord USB cable

I-USB7

Software (CD-ROM)

S-SW151

Start Guide (this manual)

Lenses that can be used with the PENTAX Q-S1

Lenses that can be used with the camera are Q-mount lenses. A K-mount lens can be attached to the camera with the use

of the optional Adapter Q for K Mount Lens. (p.30)

QS1-SG-EN.book Page 1 Friday, August 8, 2014 8:51 AM

For Using Your Camera Safely ............................ 37

Care to be Taken During Handling ....................... 39

WARRANTY POLICY .......................................... 42

Information on the Operating Manual ................... 48

There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.

QS1-SG-EN.book Page 2 Friday, August 8, 2014 8:51 AM

Regarding copyrights

Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.

Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display.

Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.

To users of this camera

• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.

• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology.

Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not.

However, this has no effect on the recorded image.

• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh.

• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.

Regarding User Registration

In order to better serve you, we request that you complete the user registration, which can be found on the CD-ROM supplied with the camera or on our website.

Thank you for your cooperation.

http://www.ricoh-imaging.com/registration/

QS1-SG-EN.book Page 3 Friday, August 8, 2014 8:51 AM

Names and Functions of the Working Parts

Speaker

AF assist light/

Self-timer lamp

Strap lug

Remote control receiver

Card cover

CMOS sensor

Hot shoe

Remote control receiver

Card access lamp

Strap lug

Lens mount index (red dot)

Built-in flash

Lens information contacts

Microphone

Battery cover

Monitor

Connection cable cover

Tripod socket

HDMI terminal

(Type D)

Terminal cover

PC/AV terminal

QS1-SG-EN.book Page 4 Friday, August 8, 2014 8:51 AM

Operating Controls

0 a b c d

1 E-dial (V)

Sets the shutter speed, aperture, and exposure

compensation values. (p.23)

You can change the camera settings when the control panel

is displayed. (p.8)

You can change the menu tabs when a menu screen is

displayed. (p.9)

In playback mode, use this to magnify an image or display multiple images at the same time.

2 Mode dial

Changes the capture mode. (p.20)

3 Shutter release button

Press to capture images. (p.20)

In playback mode, press halfway to switch to capture mode.

4 Quick dial

You can easily retrieve functions such as those assigned

with Smart Effect. (p.24)

5 Lens unlock button

Press to detach the lens on the camera. (p.16)

6 Playback button (3)

Switches to playback mode. (p.25) Press the button again

to switch to capture mode.

7 Flash pop-up switch

Slide to pop up the built-in flash.

8 Power switch

Press to turn the camera on and off.

9 EV compensation button (J)

Press to change the exposure compensation and aperture

values. (p.23)

In playback mode, the JPEG data remaining in the buffer memory is saved in RAW format.

QS1-SG-EN.book Page 5 Friday, August 8, 2014 8:51 AM

0 Green/Delete button (M/L)

Resets the values being adjusted. Also, you can assign a function to this button.

Press to delete images during playback. (p.25)

a OK button (E)

When the control panel or a menu is displayed, press this button to confirm the selected item.

b Four-way controller (ABCD)

Displays the Sensitivity, White Balance, Flash Mode

or Drive Mode setup menu. (p.8)

When the control panel or a menu is displayed, use this to move the cursor or change the item to set.

Press B during playback to display the playback mode

palette. (p.26)

c MENU button (F)

Displays a menu. Press this button while the menu

is displayed to return to the previous screen. (p.9)

d INFO button (G)

Changes the style of the display on the monitor. (p.5, p.7)

About the four-way controller

In this manual, each button of the four-way controller is indicated as shown in the illustration on the right.

Monitor Display

Capture Mode

When the camera enters capture mode, the subject and the current shooting function settings are displayed on the monitor.

This state is referred to as “standby mode”. Press G in standby mode to display the “control panel” and change

settings. (p.8) If you press G while the control panel is

displayed, you can change the type of information displayed in standby mode.

Standby mode

(Standard Information Display)

Control panel

Shooting Info Display selection screen

QS1-SG-EN.book Page 6 Friday, August 8, 2014 8:51 AM

Standby Mode

1 2 3 4 5 6 7 8 9 10 11

+1.7

999

99999

21 22 23 24 25 26 27 28

1 Capture mode

2 Flash Mode

3 Drive Mode

4 White Balance

5 Custom Image

6 HDR Capture/Digital

Filter

7 w mode

8 File Format

9 AE Metering

10 Shake Reduction/

Movie SR

11 Battery level

12 Turning the focus ring in w mode

13 Temperature warning

14 Eye-Fi communication status

15 Histogram

16 Electronic Level

(horizontal)

17 Electronic Level

(vertical)

18 AF frame

19 Reset exposure compensation value

20 Interval Shooting/

Multi-exposure/

Smart Effect

21 AE Lock

22 Shutter speed

23 Aperture value

24 EV bar scale

25 Sensitivity

26 ND Filter

27 Memory card

28 Image storage capacity

29 Face detection frame

(when [Autofocus

Method] is set to [Face

Detection])

Control Panel

mode

1 Function name

2 Setting

3 Custom Image/S mode

4 Digital Filter

5 HDR Capture

6 Highlight Correction

7 Shadow Correction

8 AE Metering

9 ND Filter

10 Focus Method

11 Autofocus Method

12 Focus Peaking

13 Distortion Correction

14 Aspect Ratio

15 File Format

16 JPEG Recorded Pixels and Quality Level/Movie

Recorded Pixels

17 Shake Reduction/

Movie SR

18 Exposure Setting

19 Framerate

20 Recording Sound Level

21 Destination

22 Current date and time

23 Memory card

24 Number of recordable still pictures/movie recordable time

QS1-SG-EN.book Page 7 Friday, August 8, 2014 8:51 AM

Playback Mode

The captured image and shooting information are displayed in single image display of the playback mode.

Press G to change the type of information displayed in single image display. Use CD to select the type and press E.

Single image display

(Standard Information Display)

Playback Info Display selection screen

QS1-SG-EN.book Page 8 Friday, August 8, 2014 8:51 AM

How to Change Function Settings

The camera functions and their settings can be selected and changed by using the following ways.

Direct keys

Control panel

Menus

Press ABCD in standby mode.

Press G in standby mode.

(indicated with the v icon in this manual)

Press F.

WXYZ Using the Direct Keys

Sensitivity

White Balance

Flash Mode

Drive Mode

Using the Control Panel

You can set frequently used shooting functions. Press G in standby mode.

Use ABCD to select an item.

Use V to change settings.

MENU

Press F to cancel setting operation.

Press E to confirm the selected item and return to the control panel.

QS1-SG-EN.book Page 9 Friday, August 8, 2014 8:51 AM

Using the Menus

Most functions are set from the menus. Functions that can be set on the control panel can also be set from the menus.

1 2 3

Use V to switch the menu tabs.

Use AB to select an item.

Menu numbers

1 2 3

MENU

Press F to exit the menu screen.

1 2 3

MENU

Press D to display the pop-up menu.

MENU

F

Press D to display the submenu.

1 2 3

Use AB to select an item.

MENU OK

Press F to cancel the pop-up menu.

Press E to confirm the selected item.

MENU

Press F to return to the previous screen.

QS1-SG-EN.book Page 10 Friday, August 8, 2014 8:51 AM

Menu List

Rec. Mode Menus

Item

Custom Image

Digital Filter

HDR Capture

Image

Capture

Settings

Aspect Ratio

File Format

JPEG Recorded

Pixels

JPEG Quality

Focus Method

Autofocus Method

AF Assist Light

AF/MF

Settings

MF Autozoom

AE Metering

ND Filter

Focus Peaking

Distortion Correction

Function

Sets the image finishing tone such as color and contrast before shooting an image.

Applies a digital filter effect when taking pictures.

Enables capturing images with high dynamic range.

Sets the horizontal and vertical ratio of images.

Sets the file format of images.

Default Setting

Bright

No Filter

Off w

JPEG q

Sets the recording size of images saved in JPEG format.

Sets the quality of images saved in JPEG format.

Selects the autofocus or manual focus mode.

Selects the autofocus method in v mode.

Sets whether to use the assist light when autofocusing in dark locations.

Magnifies the monitor display and makes it easier to focus on the subject.

Emphasizes the outline of the subject in focus and makes it easier to check the focus.

Selects the part of the sensor to use for measuring brightness and determining exposure.

Sets whether to use the ND filter built-in to the lens.

Reduces distortions occurring due to lens properties.

m v

Multiple AF Points

Off

Multi-segment

Off

QS1-SG-EN.book Page 11 Friday, August 8, 2014 8:51 AM

Item

Highlight

Correction

Function

Expands the dynamic range and prevents bright areas from occurring.

D-Range

Settings

High-ISO NR

Shadow

Correction

Expands the dynamic range and prevents dark areas from occurring.

Sets the Noise Reduction setting when shooting with a high ISO sensitivity.

Shake Reduction

Input Focal Length

Live View

Instant

Review

Electronic Level

Grid Display

Histogram Display

Highlight Alert

Display Time

Displays the grid in standby mode.

Displays the histogram in standby mode.

Bright (overexposed) areas blink red in standby mode.

Sets the Instant Review display time.

Zoom Instant Review Sets whether to display magnified image during Instant Review.

Save RAW Data Sets whether to save the RAW image during Instant Review.

Delete

Histogram Display

Activates the Shake Reduction function.

Sets the focal length when using a lens for which focal length information cannot be obtained.

Displays the camera angle (horizontal and vertical) in standby mode.

Sets whether to delete the displayed image during Instant Review.

Displays the histogram during Instant Review.

Quick Dial

Green

Button

Highlight Alert Bright (overexposed) areas blink red during Instant Review.

Assigns functions to the quick dial.

Green Button Assigns a function to M.

Action in M/TAv Mode Sets the camera action for when M is pressed in L / K mode.

E-dial in Program Sets the value to change when V is turned in G mode.

Memory Determines which settings to save when the power is turned off.

Default Setting

Auto

0.0 mm

Off

1sec.

Off

Smart Effect

Green Button

P LINE

P SHIFT

All On except

Focus Position,

Digital Filter,

HDR Capture

*1 The functions can also be set from the control panel.

QS1-SG-EN.book Page 12 Friday, August 8, 2014 8:51 AM

Movie Menu

Menu Item

Exposure Setting

Digital Filter

Movie Capture Settings

Movie Continuous AF

Recording Sound Level

Movie SR

*1 The functions can also be set from the control panel.

Function

Sets whether to adjust the shutter speed and aperture value manually.

Applies a digital filter effect when recording a movie.

Sets the number of recorded pixels and the framerate of the movie.

Continues autofocusing even while recording a movie.

Sets the volume level for recording.

Activates the Movie Shake Reduction function.

Default Setting

Program AE

No Filter u/30 fps

Volume level 3

Playback Menu

Slideshow

Item

Display Duration

Screen Effect

Repeat Playback

Function

Sets an image display interval.

Sets a transition effect when the next image is displayed.

Starts the slideshow again from the beginning after the last image is displayed.

Quick Zoom

Auto Movie Playback Plays back movies during the slideshow.

Sets the initial magnification when magnifying images.

Highlight Alert

Auto Image Rotation

Delete All Images

Bright (overexposed) portions blink red in Standard Information

Display or Histogram Display in playback mode.

Rotates images which were captured with the camera held vertically or of which the rotation information has been changed.

Deletes all saved images at once.

Default Setting

3sec.

Off

QS1-SG-EN.book Page 13 Friday, August 8, 2014 8:51 AM

Set-up Menus

Menu Item

Language/W

Date Adjustment

World Time

1 Sound Effects

LCD

Display

Guide Display

Display Color

LCD Display Settings

Flicker Reduction

Video Out

Interface

Options HDMI Out

Folder Name

USB Connection

Create New Folder

File No.

Sequential

Numbering

Reset File Number

Eye-Fi

Function

Changes the display language.

Sets the date and time and the display format.

Switches the displayed date and time to that of your hometown or a specified city.

Switches the operation sound on/off and changes the volume for

In-focus, AE-L, Self-timer, Remote Control, One Push File Format and Shutter Sound.

Sets whether to display the operation guides when the capture mode is changed.

Sets the display color of the control panel and the menus.

Adjusts the brightness and the color of the monitor.

Cuts down on screen flicker by setting the power frequency.

Sets the output format when connecting to an AV device with a video input terminal.

Sets the output format when connecting to an AV device with an HDMI input terminal.

Sets the USB connection mode when connecting to a computer.

Sets the naming system for folders to store images.

Creates a new folder on the memory card.

Sets whether to continue the sequential numbering for the file name even if a new folder is created.

Resets the file number and starts numbering from 0001 again.

Sets the camera action for when an Eye-Fi card is used.

Default Setting

English

01/01/2014

Hometown

Volume 3

Shutter Sound: 1

Others: On

50Hz

Auto

MSC

Date

Off

QS1-SG-EN.book Page 14 Friday, August 8, 2014 8:51 AM

Power Saving

Auto Power Off

Reset

Pixel Mapping

Dust Removal

Format

Item

Firmware Info/Options

Function

Enables saving battery power by setting the monitor display to dim automatically if no operations are made within 5 seconds.

Sets the time until the camera turns off automatically if no operations are made for a certain period of time.

Resets the settings of the direct keys and for the items of the A menu, C menu, B menu, D menu, control panel, and playback mode palette.

Maps out and corrects any defective pixels on the CMOS sensor.

Cleans the CMOS sensor by shaking it.

Formats a memory card.

Displays the camera’s firmware version.

Default Setting

1min.

QS1-SG-EN.book Page 15 Friday, August 8, 2014 8:51 AM

Custom Setting Menus

Item

1. Lens Shutter Options

2. Sensitivity Steps

3. AE-L with AF Locked

4. Link AE and AF Point

5. Bracketing Order

6. WB When Using Flash

7. AWB in Tungsten Light

8. AF Release Options

9. AF with Remote Control

10. Focus Ring in AF Mode

11. Flash When Retracted

12. Release While Charging

13. Color Space

14. Save Rotation Info

15. Save Menu Location

16. Auto SR Off

Reset Custom Functions

Function Default Setting

Sets whether to use the lens shutter and/or the electronic shutter. Lens shutter only

Sets the adjustment steps for ISO sensitivity.

1 EV Step

Off Sets whether to lock the exposure value when the focus is locked.

Sets whether to link the exposure and AF point in the focusing area during multi-segment metering.

Sets the order for Exposure Bracketing shooting.

Sets the white balance setting when using flash.

Off

0 - +

Auto White

Balance

Sets the tungsten light color tone when the white balance is set to g (Auto White Balance).

Sets the action priority for when the shutter release button is fully pressed in v mode.

Subtle Correction

Focus-priority

Sets whether to use autofocus when shooting with a remote control unit.

Disables the focus ring operation during v mode.

Sets whether to discharge the built-in flash when retracted.

Sets whether to release the shutter while the built-in flash is charging.

Sets the color space to use.

Sets whether to save rotation information when shooting.

Saves the last menu tab displayed on the monitor and displays it again the next time F is pressed.

Automatically turns off the Shake Reduction function when Selftimer or Remote Control is set.

Resets all the settings in the E 1-3 menus to the defaults.

Off

Enable

Discharge Flash

Off sRGB

Reset Menu

Location

Enable

Auto SR Off

QS1-SG-EN.book Page 16 Friday, August 8, 2014 8:51 AM

Getting Your Camera Ready for Use

Attaching the Strap

Pass the end of the strap through the strap lug and secure it on the inside of the clasp.

Attach the other end in the same manner.

Attaching a Lens

Make sure that the camera is turned off.

Remove the body mount cover (1) and lens mount cover (2).

After removing the cover, be sure to put the lens down with the lens mount side facing upward.

Align the lens mount index

(red dots: 3) on the camera and the lens, and secure by turning the lens clockwise until it clicks.

To remove the lens

Attach the lens cap, and then turn the lens counterclockwise while holding down the lens unlock button (4).

QS1-SG-EN.book Page 17 Friday, August 8, 2014 8:51 AM

Using the Battery and Charger

Charging the Battery

Connect the AC plug cord to the battery charger.

Plug the AC plug cord into the power outlet.

Indicator lamp

Battery charger

AC plug cord

Inserting/Removing the Battery

Slide the battery cover in the direction of 1.

Insert the battery until it locks into place with the A mark facing toward the lens.

To remove the battery, push the battery lock lever in the direction of 3.

Close the battery cover, and slide it in the direction of 5.

Face the A mark on the battery up, and insert it into the battery charger.

The indicator lamp is lit while charging and turns off when the battery is fully charged.

(Approximate maximum charging time: 115 minutes)

QS1-SG-EN.book Page 18 Friday, August 8, 2014 8:51 AM

Inserting a Memory Card

Slide the card cover in the direction of 1.

Insert the card all the way with the memory card label facing toward the monitor.

Push the memory card in once to remove.

Close the card cover, and slide it in the direction of 4.

Initial Settings

Press the power switch.

The [Language/W] screen appears.

Use ABCD to select the desired language and press E.

The [Initial Setting] screen appears in the selected language.

Proceed to Step 7 if F

(Hometown) does not need to be changed.

MENU

Press B to move the frame to F and press D.

The [F Hometown] screen appears.

Use CD to select a city.

Use V to change the region.

MENU

Press B to select [DST] (daylight saving time), and use CD to select S or T.

Press E.

The camera returns to the [Initial Setting] screen.

QS1-SG-EN.book Page 19 Friday, August 8, 2014 8:51 AM

Press B to select [Settings complete] and press E.

The [Date Adjustment] screen appears.

Press D, and use AB to select the date format.

MENU OK

Press D, and use AB to select 24h or 12h.

Press E.

The frame returns to [Date Format].

Press B, and then press D.

The frame moves to the month if the date format is set to [mm/dd/yy].

Use AB to set the month.

Set the day, year and time in the same manner.

mm/dd/yy 24h

MENU

Press B to select

[Settings complete] and press E.

The camera switches to capture mode and is ready to take a picture.

MENU

Formatting a Memory Card

Press F.

The A1 menu appears.

Use V to display D4 menu.

Use AB to select [Format] and press D.

The [Format] screen appears.

Press A to select [Format] and press E.

mm/dd/yy 24h

D4

QS1-SG-EN.book Page 20 Friday, August 8, 2014 8:51 AM

Basic Shooting Operation

Remove the front lens cap by pushing the top and bottom portions as indicated in the illustration.

Turn the mode dial to select the capture mode.

Dial indicator

The selected capture mode is displayed on the monitor

(Guide Display).

View the subject on the monitor.

When using a zoom lens, turn the zoom ring to the right or left to adjust the composition of the image.

Position the subject inside the AF frame and press the shutter release button halfway.

Focus on the subject.

AF frame

Press the shutter release button fully.

The captured image is displayed on the monitor

(Instant Review).

Available operations

Deletes the image.

Saves the RAW image.

QS1-SG-EN.book Page 21 Friday, August 8, 2014 8:51 AM

Capture Mode Types

Select the capture mode that suits the subject and shooting conditions.

The following capture modes are available on this camera.

Capture Mode

(Auto Picture modes)

(Scene modes)

(Blur Control mode)

Application

Automatically selects the optimal capture mode from a (Standard), b (Portrait), c

(Landscape), d (Macro), f (Night

Scene Portrait), g (Sunset), h (Blue Sky) or i (Forest).

Offers you various scene modes to choose from.

Enables you to create a picture that looks as if it was taken with a wide-open aperture and shallow depth of field, by shooting multiple images with different focus positions and merging them into a single image.

/I/J/L

(Exposure modes)

(Movie mode)

Changes the shutter speed and aperture value.

Records a movie.

tMemo

• The functions that can be set vary depending on the capture

mode. Refer to “Restrictions on Each Capture Mode” (p.27)

for details.

Scene Modes

Set the mode dial to S.

The Scene mode selection screen appears.

Use ABCD to select a scene mode.

MENU OK

b c d

Portrait

Landscape

Macro

For capturing portraits. Reproduces a healthy and bright skin tone.

For capturing landscape views.

Reproduces the vivid green of trees.

For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.

e f g h

Night Scene

Portrait

Sunset

Blue Sky i j k l

Forest

Night Scene

HDR

Night Snap

For capturing images of people in low light conditions, such as dusk or at night.

For capturing sunrises or sunsets in beautiful, vivid color.

For capturing images of blue sky.

Produces a more impressive deep blue.

Enhances colors of trees and sunbeams through foliage and produces a vivid color image.

Used for shooting at night.

Takes three consecutive images at three different exposure levels to create a single composite image with them.

For taking snapshots in poorly lit place.

QS1-SG-EN.book Page 22 Friday, August 8, 2014 8:51 AM r n m o p q

HDR

Quick Macro

Food

Pet

Kids

Surf & Snow

Backlight

Silhouette

Candlelight

Captures 3 images to generate a single

HDR image and provides a wider dynamic range.

For quick capture of tiny objects at close focus range.

For capturing images of food. Saturation will be rather high to make food look appetizing.

For capturing moving pets.

For capturing moving kids. Reproduces healthy and bright skin tone.

For capturing images of dazzling backgrounds, such as snowy mountains.

Produces a silhouette image of subject in backlight condition.

For capturing scenes in candlelight.

s t u v Museum

For capturing images in places where a flash is prohibited.

Press E.

tMemo

• You can change the scene mode from the control panel or the A1 menu.

Blur Control Mode

Set the mode dial to U.

Use V to adjust the level of blur.

Check the blur effect in the image by viewing it in playback mode.

QS1-SG-EN.book Page 23 Friday, August 8, 2014 8:51 AM

Exposure Modes

Mode

Program

Automatic

Exposure

Shutter Priority

Automatic Exposure

J x: Available #: Restricted

: Not available

Change

Shutter

Speed

Change

Aperture

Value

Change

Sensitivity

EV Compensation

*1 x

× x x x x

Aperture Priority

Automatic Exposure

Manual Exposure

× x x x x x

*2 x

*1 You can set the value to be changed in [Green Button] of the A3 menu.

*2 When the sensitivity is set to [ISO AUTO], the camera operates in K (Shutter & Aperture Priority Automatic Exposure) mode.

Set the mode dial to G, I, J or L.

D appears next to the value that can be changed.

Use V to adjust the value.

In L mode, press J (1), and use V (2) to change the aperture value.

In G/I/J mode, the exposure compensation value can be adjusted (from -3 to +3 EV in increments of 1/3 EV) by the same operation.

+1.7

EV bar scale

QS1-SG-EN.book Page 24 Friday, August 8, 2014 8:51 AM

Movie Mode

Set the mode dial to C.

Sound

Recordable Time

Press the shutter release button halfway.

When [Focus Method] is set to v, autofocus is performed.

Press the shutter release button fully.

Movie recording starts.

R blinks at the top left of the screen.

When [Focus Method] is set to v, press E to perform autofocus.

Press the shutter release button fully.

Movie recording stops.

Shooting with Smart Effect

You can take images using various effects.

The following effects are available.

Brilliant Color

Unicolor Bold

Vintage Color

Antique

Warm Fade

Tone Expansion

Bold Monochrome

Vibrant Color Enhance

Faded Color

USER 1 to 3

In standby mode, turn the quick dial to select the position 1 to 4.

With the default settings, Brilliant

Color, Unicolor Bold, Vintage

Color, and Antique can be selected.

Shoot.

After taking pictures, return the quick dial to the position 0.

The camera returns to the original settings.

tMemo

• To use effects other than Brilliant Color, Unicolor Bold,

Vintage Color, and Antique, the settings of the quick dial must be changed. For details on how to change the settings, refer to the Operating Manual.

QS1-SG-EN.book Page 25 Friday, August 8, 2014 8:51 AM

Reviewing Images

Press 3.

The camera enters playback mode and the most recently captured image is displayed

(single image display).

Review the captured image.

Available operations

Displays the previous image.

Displays the next image.

Deletes the image.

V to the right

V to the left

Magnifies the image (up to 16×).

Use ABCD to change the area to display.

Press M to return the display area to the center.

Switches to the thumbnail display.

Saves the RAW image (only when a JPEG image was taken and the data remains in the buffer).

Changes the type of information displayed.

Displays the playback mode palette.

Playing Back Movies

Available operations

Plays back/pauses a movie.

Forwards a frame (when paused).

Press and hold D

Fast-forwards playback.

Reverses a frame (when paused).

Press and hold C

Fast-reverses playback.

Stops playback.

Adjusts the volume (6 levels).

Saves the displayed frame as a JPEG file (when paused).

QS1-SG-EN.book Page 26 Friday, August 8, 2014 8:51 AM

Playback Mode Palette

Playback functions can be set from the playback mode palette as well as the B1 menu.

You can edit images with the playback mode palette.

Rotates captured images.

Useful for image playback on

MENU OK

Item

Image Rotation

Digital Filter

U Red-eye Edit

V Resize

*1 *2

o Save as Manual

W Cropping

X Index

Y Protect

Z Slideshow

Function

Changes the rotation information of images.

Processes images with digital filters.

Corrects images of a subject captured with red eyes.

Changes the number of recorded pixels of the image.

Crops out only the desired area of an image.

Joins a number of images together and creates an index image with them.

Protects images from being accidentally erased.

Plays back images one after another.

Saves the white balance settings of the captured image as Manual

White Balance.

Item a Save Cross g

Processing

Save Smart

Effect

b RAW c

Development

Movie Edit

Function

Saves the settings used for an image captured in Cross Processing mode of

Custom Image or Smart Effect as your

“Favorite” settings.

Saves the shooting settings of your favorite image to the quick dial.

Develops RAW images into JPEG format.

Divides a movie or deletes unwanted segments.

Transfers selected images wirelessly using an optional Eye-Fi card.

e Eye-Fi Image

Transfer

*1 Not available when a movie is displayed.

*2 Not available when a RAW image is displayed.

*3 Available only when a RAW image is saved.

*4 Available only when a movie is displayed.

QS1-SG-EN.book Page 27 Friday, August 8, 2014 8:51 AM

Restrictions on Each Capture Mode

#: Restricted

: Not available

Capture Mode

Function

R bf cg js t dh im q e kr l n o p u v

Sensitivity

Flash

Single Frame

Shooting

Continuous

Shooting

Self-timer

Remote

Control

0 sec./

3 sec.

Continuous

Shooting

Exposure

Bracketing

Multi-exposure

Interval Shooting

AUTO

× ×

AUTO

× ×

× × e

*1 e

× ×

*1 f

× × ×

× × × f

*1 e

Focus Method

File Format

RAW/

RAW+

× ×

U V C

- ISO

1600

× × ×

× ×

× × ×

× ×

QS1-SG-EN.book Page 28 Friday, August 8, 2014 8:51 AM

Capture Mode

Function

Shake Reduction

R bf cg js t dh im q e kr l

*1 g

× g

n o p u v g

*1 g

White Balance

Custom Image

Digital Filter

HDR Capture

Save RAW Data

× × × × × × × × × × × ×

× × × ×

*1 Fixed to; the setting cannot be changed.

*2 Limited to; available settings are limited.

*3 Fixed to; M for JPEG, N for RAW/RAW+.

*4 The shortest shooting interval is 10 sec.

*5 Focus methods other than e and f can be selected.

*6 Specific settings are used.

U V C

× ×

QS1-SG-EN.book Page 29 Friday, August 8, 2014 8:51 AM

Restrictions on the Combinations of Special Functions

Continuous

Shooting

Flash

Continuous

Shooting

Self-timer

Remote Continuous

Shooting

Exposure Bracketing

Multi-exposure

Interval Shooting

File Format

RAW/

RAW+

Custom Image

Digital Filter

Smart Effect

Save RAW Data

*1 Fixed to; the setting cannot be changed.

Exposure

Bracketing

Multi-exposure

Interval

Shooting

Digital Filter Smart Effect

: Not available

HDR Capture

QS1-SG-EN.book Page 30 Friday, August 8, 2014 8:51 AM

Functions Available with Various

Lenses

A group

B group

01 STANDARD PRIME

02 STANDARD ZOOM

06 TELEPHOTO ZOOM

08 WIDE ZOOM

04 TOY WIDE

05 TOY TELEPHOTO

07 MOUNT SHIELD

03 FISH-EYE

C group

D group

ADAPTER Q FOR K MOUNT LENS

Function v w

Quick-shift focus

Autofocus Method

MF Autozoom

Lens Type

Aperture control

ND filter on the lens

Shutter on the lens

Electronic shutter x: Available #: Restricted

: Not available

A group x x x x x x x x

B group

× x

C group

× x

/S/U mode

/I/J mode

mode

Movie Continuous AF

P-TTL auto flash x x x x

*5 *6

*9 *10

*9 *11

D group

× x

*1 No focusing mechanism on 07 MOUNT SHIELD

*2 Set the aperture manually.

*3 Lens shutter built-in to the adapter used.

*4 Set [1. Lens Shutter Options] to [Lens and electronic shutters] or

[Electronic shutter only] in the E1 menu. When [Lens and electronic shutters] is selected, you can take pictures at higher speeds with the electronic shutter than with the lens shutter.

Ex.)With a 01 STANDARD lens

Pictures are taken at 1/2000 sec. or slower with the lens shutter and 1/2000 sec. or faster with the electronic shutter.

*5 Aperture value fixed.

*6 V mode is not available. Allows the use of a slow shutter speed of up to 2 sec.

*7 06 TELEPHOTO ZOOM lens is not available.

*8 Built-in flash: 1/2000 sec., external flash: 1/250 sec.

*9 Flash sync speed is approx. 1/13 sec.

*10 Light is unevenly distributed.

*11 Light may be unevenly distributed.

Compatibility with the Built-in Flash

Depending on the lens being used, the use of the built-in flash may be limited.

Lens

02 STANDARD ZOOM

03 FISH-EYE

08 WIDE ZOOM

Restrictions when using the built-in flash

If the focal length is less than 6 mm, vignetting may occur at the wideangle setting.

The built-in flash is not available due to vignetting.

Light may be unevenly distributed depending on the shooting conditions because the built-in flash does not cover the angle of view of the lens.

QS1-SG-EN.book Page 31 Friday, August 8, 2014 8:51 AM

About Hoods

When using a hood with a 02 STANDARD ZOOM lens, be sure to use the PH-RBB 40.5mm. If the PH-SBA 40.5mm is used, vignetting may occur at the wide-angle setting.

About Filters

Vignetting will occur at the wide-angle setting if the 100 PL

FILTER is used with a 02 STANDARD ZOOM lens.

Using a K-Mount Lens

A K-mount lens can be attached to this camera with the use of the optional Adapter Q for K Mount Lens. When a K-mount lens is used, the focal length must be set manually for some functions such as Shake Reduction, since the focal length cannot be obtained automatically.

Turn the camera off.

Attach the adapter and lens to the camera, and turn the camera on.

The [Input Focal Length] screen appears.

Set the lens focal length.

0 0 0 0 . 0 mm

MENU OK

Available operations

Changes the value of each digit.

Selects a digit.

Selects a value from the list.

When using a zoom lens, select the actual focal length which the zoom is set to.

Press E.

The camera returns to standby mode.

tMemo

• The focal length setting can be changed in [Input Focal

Length] of the A2 menu.

• When the Adapter Q for K Mount Lens is used, the camera operates in J mode when the capture mode is set to other than L mode.

• Refer to the Adapter Q for K mount lens manual for details.

QS1-SG-EN.book Page 32 Friday, August 8, 2014 8:51 AM

Main Specifications

Model Description

Type

Lens Mount

Lens-interchangeable SL digital camera

PENTAX bayonet Q-mount

Compatible Lens Q-mount lenses

Image Capture Unit

Image Sensor

Effective Pixels

Total Pixels

Type: CMOS sensor with a primary color filter

Size: 1/1.7-inch

Approx. 12.4 megapixels

Approx. 12.76 megapixels

Dust Removal

Sensitivity

(Standard output)

Image sensor cleaning using ultrasonic vibrations

“DR II”

AUTO: ISO 100 to ISO 12800 (1/3 EV steps)

• Up to ISO 1600 when the shutter speed is set to 2 sec. or slower.

Image Stabilizer Sensor shift Shake Reduction

File Formats

Recording

Formats

Recorded Pixels

RAW (DNG), JPEG (Exif 2.3), DCF 2.0 compliant

JPEG: w q 12M (4000×3000) p 7M (3072×2304) o 3M (1920×1440) x q 10M (4000×2664) p 6M (3072×2048) o 2M (1920×1280) y q 9M (4000×2248) p 5M (3072×1728) o 2M (1920×1080) v q 9M (2992×2992) p 5M (2304×2304) o 2M (1440×1440)

RAW: w q 12M (4000×3000)

Quality Level

Color Space

Storage Media

Storage Folder

RAW (12 bit): DNG

JPEG: m (Best), l (Better), k (Good)

• RAW and JPEG simultaneously recordable sRGB, AdobeRGB

SD Memory Cards, SDHC Memory Cards, SDXC

Memory Cards and Eye-Fi Cards

Date (100_1018, 100_1019...)/

PENTX (100PENTX, 101PENTX...)

LCD Monitor

Type

Size

Dots

Adjustment

Display

TFT color LCD monitor, wide angle viewing, with AR coating

3.0 inches

Approx. 460,000 dots

Brightness and colors adjustable

Field of view: approx. 100%, Electronic Level,

Grid Display (4 × 4 Grid, Golden Section, Scale),

Highlight Alert, Histogram

White Balance

Auto

Preset

TTL by CMOS image sensor

Daylight, Shade, Cloudy, Fluorescent Light

(D: Daylight Color, N: Daylight White, W: Cool White,

L: Warm White), Tungsten, Flash, n, Manual

Manual

Configuration using the display screen (up to 3 settings can be saved), Copying the white balance settings of a captured image

Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis

Autofocus System

Type Contrast detection AF

Brightness Range EV 0 to 18 (ISO100)

Focus Method v/w switching

AF Assist Light Dedicated LED AF assist light

QS1-SG-EN.book Page 33 Friday, August 8, 2014 8:51 AM

MF Autozoom

Focus Peaking

Off/×2/×4/×6

Off/On

Exposure Control

Type

Metering Range

Aperture

ND Filter

TTL image sensor metering

Metering modes: Multi-segment metering, Centerweighted metering, and Spot metering

EV 1 to 17 (ISO 100, F1.9 lens), +2 EV with

Electronic Shutter enabled, +2 EV with an ND filter

Exposure Modes

Shutter

Auto Picture modes: Standard, Portrait, Landscape,

Macro, Night Scene Portrait, Sunset, Blue Sky,

Forest

Scene modes: Portrait, Landscape, Macro, Moving

Object, Night Scene Portrait, Sunset, Blue Sky,

Forest, Night Scene, Night Scene HDR*, Night Snap,

HDR*, Quick Macro*, Food, Pet, Kids, Surf & Snow,

Backlight Silhouette, Candlelight, Stage Lighting,

Museum

Program, Shutter Priority, Aperture Priority, Manual,

Bulb, Blur Control*

*JPEG only

EV Compensation ± 3 EV (1/3 EV steps)

AE Lock Can be assigned to the M/L button from the menu.

Lens shutter: 1/2000 - 30 seconds (1/3 EV steps,

1/8000 - 30 seconds with Electronic Shutter enabled), Bulb

• When using a lens that has no lens shutter, shooting at 1/8000 - 2 seconds with the electronic shutter is available, while Bulb shooting is not available.

From wide open to F8

• Aperture is fixed when using a lens that has no lens shutter.

Off/On

• Not available when using a lens that has no lens shutter.

Drive Modes

Mode Selection

Continuous FPS

Single frame, Continuous (Hi, Lo), Self-timer (12s,

2s), Remote Control (0 sec., 3 sec., continuous),

Exposure Bracketing (3 frames, remote control),

Multi-exposure (0 sec., self-timer, remote control),

Interval Shooting

Approx. 5 fps, JPEG (wq12M/m/Continuous

Hi): up to 5 frames

Approx. 1.5 fps, JPEG (wq12M/m/

Continuous Lo): up to 100 frames

Built-in Flash

Type

Flash Modes

Sync Speed

Built-in retractable P-TTL flash

Guide number: approx. 4.9 (ISO100/m), approx. 7 (ISO200/m)

Angle of view coverage: equivalent to 28 mm in 35 mm format

P-TTL, Red-eye Reduction, Slow-speed Sync,

Trailing Curtain Sync

Lens shutter: built-in flash 1/2000 seconds

Used with external flash units: 1/250 seconds

Electronic shutter: 1/13 seconds

-2.0 to +1.0 EV

Flash Exposure

Compensation

Capture Functions

Custom Image

Bright, Natural, Portrait, Landscape, Vibrant,

Radiant, Muted, Bleach Bypass, Reversal Film,

Monochrome, Cross Processing

Noise Reduction High-ISO NR

Dynamic Range

Setting

Lens Correction

Highlight Correction, Shadow Correction

Distortion Correction

Digital Filter

HDR Capture

Toy Camera, High Contrast, Shading, Tone

Expansion, Invert Color, Extract Color, Unicolor

Bold, Water Color, Posterization, Slim, Fish-eye

Auto, Type1, Type2

QS1-SG-EN.book Page 34 Friday, August 8, 2014 8:51 AM

Multi-exposure

Interval Shooting

Smart Effect

Electronic Level

Number of Shots: 2-9

Exposure adjusted automatically.

Shooting interval: 3 sec. to 24 hr.

Start Interval: immediately, from the set time

Number of Shots: up to 999 images

Brilliant Color, Unicolor Bold, Vintage Color, Antique,

Warm Fade, Tone Expansion, Bold Monochrome,

Faded Color, Vibrant Color Enhance, USER 1-3

Displayed on LCD monitor (horizontal and vertical directions)

Movie

Recording Format MPEG-4 AVC/H.264

Recorded Pixels u (1920×1080, y, 30 fps/25 fps/24 fps) t (1280×720, y, 30 fps/25 fps/24 fps) s (640×480, w, 30 fps/25 fps/24 fps)

Sound

Recording Time

Built-in monaural microphone

Up to 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.

Custom Image

Digital Filter

Interval Movie

Record

Bright, Natural, Portrait, Landscape, Vibrant,

Radiant, Muted, Bleach Bypass, Reversal Film,

Monochrome, Cross Processing

Toy Camera, High Contrast, Shading, Tone

Expansion, Invert Color, Extract Color, Unicolor

Bold, Water Color, Posterization, Slim, Fish-eye

Recording interval: 3 sec., 5 sec., 10 sec., 30 sec.,

1 min., 5 min., 10 min., 30 min., 1 hr.

Recording time: 12 sec. to 99 hr.

Start Interval: immediately, from the set time

Movie Continuous

Off/On

Playback Functions

Playback View

Delete

Digital Filter

RAW

Development

Editing Features

Single frame, Multi-image display (4, 9, 30, and

56 thumbnails), Image magnification (up to 16×, scrollable, quick zoom), Rotated image display,

Histogram (Y histogram, RGB histogram), Highlight

Alert, Auto Image Rotation, Detailed Information

Display, Folder Display, Calendar Filmstrip Display,

Slideshow

Single image, all images, select & delete, folder, instant review image

Base Parameter Adj, Toy Camera, High Contrast,

Shading, Tone Expansion, Invert Color, Extract

Color, Unicolor Bold, Water Color, Posterization,

Slim, Fish-eye, Retro, Sketch, Miniature, Soft,

Starburst

File Format (JPEG), Aspect Ratio, Color Space,

White Balance, Custom Image, Digital Filter,

Sensitivity, High-ISO NR, Shadow Correction,

Distortion Correction

Resize, Cropping (aspect ratio can be changed),

Index, Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a JPEG still picture from a movie, Red-eye Edit, Save RAW Data

Customization

Custom Functions 16 items

Mode Memory 11 items

Button/Dial

Customization

World Time

M/L button: Green Button, Preview, One Push File

Format, AE Lock, Enable AF

Quick Dial: Smart Effect, Aspect Ratio, Focus

Method, Focus Peaking, ND Filter

World Time settings for 75 cities (28 time zones)

Power Supply

Battery Type

AC Adapter

Rechargeable Lithium-ion Battery D-LI68

AC Adapter Kit K-AC115 (optional)

QS1-SG-EN.book Page 35 Friday, August 8, 2014 8:51 AM

Battery Life

Number of recordable images (with 50% flash usage): approx. 250 images,

(without flash usage): approx. 260 images

Playback time: approx. 160 minutes

• Tested in compliance with CIPA standard using a new rechargeable lithium-ion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/ circumstances.

Interfaces

Connection Port

USB 2.0/AV output terminal, HDMI output terminal

(Type D)

USB Connection MSC/PTP

Video Output

Format

NTSC/PAL

Dimensions and Weight

Dimensions

Weight

Approx. 105.0 mm (W) × 58.0 mm (H) × 34.0 mm (D)

(excluding the operation parts and protrusion)

Approx. 203 g (loaded and ready with the dedicated battery and SD Memory Card)

Approx. 183 g (body only)

Accessories

Package

Contents

Software

USB Cable I-USB7, Strap O-ST131, Rechargeable

Lithium-ion Battery D-LI68, Battery Charger

D-BC68P,

AC plug cord, Software (CD-ROM) S-SW151,

Start Guide

Hot shoe cover F

, Body mount cover

Digital Camera Utility 5

Approximate Image Storage Capacity and Playback Time

(When using the fully charged battery)

Battery

D-LI68

Temperature

23°C

Normal

Shooting

260

Flash Photography

50% Use 100% Use

250 240

Playback

Time

160 minutes

• The image storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on the selected capture mode and shooting conditions.

Approximate Image Storage Capacity by Size

(When using a 2 GB memory card)

Aspect Ratio y x w v

Recorded

Pixels q 9M p 5M o 2M q 10M p 6M o 2M q 12M p 7M o 3M q 9M p 5M o 2M

410

687

1679

547

908

2183 m

JPEG Quality l

544

908

755

1250

2183

461

771

1871

2939

641

1064

2533

571

951

2281

759

1250

2939

RAW

• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode and memory card, etc.

1264

2060

4596

1077

1764

4010

961

1582

3639

1270

2060

4596

–

103

–

103

–

103

–

103

–

QS1-SG-EN.book Page 36 Friday, August 8, 2014 8:51 AM

Operating Environment for USB Connection and Provided Software

With the provided software “Digital Camera Utility 5”, you can develop RAW files on a computer. Install the software from the provided CD-ROM (S-SW151).

We recommend the following system requirements to connect the camera to a computer and to use the software.

Windows

CPU

RAM

HDD

Monitor

Windows 8.1 (32-bit, 64-bit), Windows 8 (32-bit,

64-bit), Windows 7 (32-bit, 64-bit) or Windows

Vista (32-bit, 64-bit)

Intel Core 2 Duo or higher

2 GB or more

For installing and starting up the program: 100 MB or more of available space

For saving image files: Approx. 5 MB/file (JPEG),

Approx. 25 MB/file (RAW)

1280×1024 dots, 24-bit full color or higher

Macintosh

CPU

RAM

HDD

OS X 10.9, 10.8 or 10.7, or Mac OS X 10.6

Intel Core 2 Duo or higher

2 GB or more

For installing and starting up the program: 100 MB or more of available space

For saving image files: Approx. 5 MB/file (JPEG),

Approx. 25 MB/file (RAW)

1280×1024 dots, 24-bit full color or higher Monitor

tMemo

• QuickTime is required to play back movies transferred to a computer. You can download it from the following site: http://www.apple.com/quicktime/download/

QS1-SG-EN.book Page 37 Friday, August 8, 2014 8:51 AM

For Using Your Camera Safely

We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.

Warning

This symbol indicates that ignoring this item could cause serious personal injuries.

Caution

This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.

About the Camera

Warning

• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.

• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.

• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with the lens cap off. Doing so may cause the camera to malfunction or cause a fire.

• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.

• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electrical shock.

Caution

• Do not place your finger over the flash when discharging the flash.

You may burn yourself.

• Do not cover the flash with clothing when discharging the flash.

Discoloration may occur.

• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.

• Should the monitor be damaged, be careful of glass fragments.

Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.

• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.

About the Battery Charger and AC Adapter

Warning

• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown.

The specified voltage is 100 - 240V AC.

• Do not disassemble or modify the product. This can cause a fire or electrical shock.

• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electrical shock.

• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electrical shock.

• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.

Continued use can cause damage to the product, fire or electrical shock.

• Wipe off the power plug if it should become covered with dust.

Accumulated dust may cause a fire.

• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Caution

• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.

QS1-SG-EN.book Page 38 Friday, August 8, 2014 8:51 AM

• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.

• Do not handle the power plug with wet hands. This can cause an electric shock.

• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.

• Do not use the battery charger D-BC68P to charge batteries other than the rechargeable lithium-ion battery D-LI68. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.

About the Rechargeable Lithium-ion Battery

Warning

• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.

Caution

• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.

• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.

• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.

• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.

• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.

• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.

• Precautions for D-LI68 Battery Usage:

- USE SPECIFIED CHARGER ONLY.

- DO NOT INCINERATE.

- DO NOT DISASSEMBLE.

- DO NOT SHORT CIRCUIT.

- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)

Keep the Camera and its Accessories out of the Reach of Small Children

Warning

• Do not place the camera and its accessories within the reach of small children.

1. If the product falls or is operated accidentally, it may cause serious personal injuries.

2. Wrapping the strap around a neck may cause suffocation.

3. To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.

QS1-SG-EN.book Page 39 Friday, August 8, 2014 8:51 AM

Care to be Taken During Handling

Before Using Your Camera

• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.

About the Battery and Charger

• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.

• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.

• Charging the battery a day before use or on the day of use is recommended.

• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC68P. Do not use it with other devices.

Precautions on Carrying and Using Your Camera

• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.

• Do not subject the camera to strong vibrations, shocks, or pressure.

Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).

• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.

• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.

• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.

These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.

• Do not press on the monitor with excessive force. This could cause it to break or malfunction.

• Be careful not to overtighten the screw in the tripod socket when using a tripod.

Cleaning Your Camera

• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.

• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.

• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to maintain high performance.

Storing Your Camera

• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.

Remove the camera from its case and store it in a dry and well-ventilated place.

• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.

QS1-SG-EN.book Page 40 Friday, August 8, 2014 8:51 AM

About SD Memory Cards

• The SD Memory Card is equipped with a write-protect switch. Setting the switch to

LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.

• The SD Memory Card may be

Write-protect switch hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.

• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if

1. the SD Memory Card is mishandled by the user.

2. the SD Memory Card is exposed to static electricity or electrical interference.

3. the SD Memory Card has not been used for a long time.

4. the SD Memory Card or the battery is removed while the card is being accessed.

• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.

• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.

• The data on your SD Memory Card should be managed at your own risk.

About Eye-Fi Cards

• An SD Memory Card with a built-in wireless LAN (“Eye-Fi card”) can be used with this camera.

• Use of an access point and an Internet connection are required for transferring images via wireless LAN. For details, refer to the Eye-Fi website. (http://www.eye.fi)

• Update your Eye-Fi card to the latest firmware before using it.

• Set [Eye-Fi Communication] of [Eye-Fi] to [OFF], or do not use an Eye-

Fi card in a location where the use of wireless LAN devices is restricted or prohibited, such as airplanes.

• Eye-Fi cards can be used only in the country in which the card was purchased. Please observe all local laws governing the Eye-Fi card usage.

• This camera features a function to enable/disable the communication function of the Eye-Fi card, however, we do not guarantee the operability of all Eye-Fi card functions.

• Refer to the Eye-Fi card manual for details on how to use the card.

• Please contact the Eye-Fi card manufacturer regarding any malfunctions or problems concerning Eye-Fi cards.

QS1-SG-EN.book Page 41 Friday, August 8, 2014 8:51 AM

Trademarks

Microsoft, Windows and Windows Vista are registered trademarks of

Microsoft Corporation in the United States of America and other countries.

Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other countries.

Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries.

SDXC Logo is a trademark of SD-3C, LLC.

Eye-Fi, the Eye-Fi logo and Eye-Fi connected are trademarks of Eye-Fi,

Inc.

This product includes DNG technology under license by Adobe Systems

Incorporated.

The DNG logo is either a registered trademark or trademark of Adobe

Systems Incorporated in the United States and/or other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United

States and/or other countries.

All other trademarks are the property of their respective owners.

This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.

Image Matching is a trademark of Seiko Epson Corporation. The PRINT

Image Matching logo is a trademark of Seiko Epson Corporation.

AVC Patent Portfolio License

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard

(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com.

QS1-SG-EN.book Page 42 Friday, August 8, 2014 8:51 AM

WARRANTY POLICY

All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.

Procedure During 12-month Warranty Period

Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply.

Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy.

In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year.

Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from our distributors in some countries can supersede this warranty policy.

Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.

QS1-SG-EN.book Page 43 Friday, August 8, 2014 8:51 AM

For customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-

003.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

FOR CALIFORNIA, U.S.A. ONLY

Perchlorate Material-special handling may apply.

The lithium battery used in this camera contains perchlorate material, which may require special handling.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

QS1-SG-EN.book Page 44 Friday, August 8, 2014 8:51 AM

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We:

Located at:

RICOH IMAGING AMERICAS

CORPORATION

633 17 Street, Suite 2600

Denver, Colorado 80202 U.S.A.

Phone: 800-877-0155

FAX: 303-790-1131

Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name:

Model Number:

Contact person:

Date and Place:

Digital Camera

PENTAX Q-S1

Customer Service Manager

August, 2014, Colorado

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.

Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.

By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.

For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.

QS1-SG-EN.book Page 45 Friday, August 8, 2014 8:51 AM

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.

For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.

The CE Mark is a Directive conformity mark of the European Union.

QS1-SG-EN.book Page 46 Friday, August 8, 2014 8:51 AM

Memo

QS1-SG-EN.book Page 47 Friday, August 8, 2014 8:51 AM

Memo

QS1-SG-EN.book Page 48 Friday, August 8, 2014 8:51 AM

Information on the Operating

Manual

An Operating Manual (PDF) containing information on how to use this camera is available. Please download it from our website. A printed version can also be purchased upon request.

Please contact your nearest service center.

Operating Manual Download: http://www.ricoh-imaging.com/ manuals/

User Registration: http://www.ricoh-imaging.com/registration/

QS1-SG-EN.book Page iii Friday, August 8, 2014 8:51 AM

Memo

QS1-SG-EN.book Page iv Friday, August 8, 2014 8:51 AM