- Computers & electronics
- Computers
- PC/workstation barebones
- HP
- LH4r - NetServer - 256 MB RAM
- Specification
advertisement
October 2000
Configuration and Options Guide
EMEA
xSeries
Netfinity
Rack products
Fibre Channel
Storage Enclosures
Clustering
Cables
Options
xSeries 200
xSeries 220
xSeries 230 /
Netfinity 5100
xSeries 240 /
Netfinity 5600
Netfinity 1000
Value Model
Netfinity 3000
Netfinity 3500
M20
Netfinity7100
Netfinity 7600
Netfinity 8500R
Netfinity 6000R
xSeries 340 /
Netfinity 4500R
Netfinity 4000R
xSeries 330
IBM FAStT EXP200
Storage Enclosure
IBM Rack Enclosure
IBM FAStT EXP500
Storage Enclosure
IBM NetBAY3
IBM EXP200
Storage Enclosure
xSeries 150 xSeries 130 xSeries 135
IBM EXP300
Storage Enclosure
Keep Us Informed
The IBM Configuration and Options Guide Survey:
Please give us the benefit of your experience
1. Please rate the value of the IBM Configuration and Options Guide overall.
Very useful ❒
Useful ❒
Not useful ❒
2. Please rate the usefulness of these sections in the IBM Configuration and
Options Guide:
Product Positioning
Selection Guidance
Business Model Summary
Product Family Pages
Sample Configurations
Fibre Array Section
Tape Drives Section
UPS Runtimes Section
Cabling Chart
Very
Useful
❒
❒
❒
❒
❒
❒
❒
❒
❒
Useful
❒
❒
❒
❒
❒
❒
❒
❒
❒
Not
Useful
❒
❒
❒
❒
❒
❒
❒
❒
❒
3. How would you rate the quality of information contained in the IBM Configuration and Options Guide?
❒ Too much
❒ About right
❒ Not enough
4. Does the format allow you to assemble a preliminary Server configuration?
❒ Quickly
❒ Able to get it done
❒ With some difficulty
5. Are you aware of the OrderBUILDER and Spreadsheet configurators that are available on PartnerInfo and the Web at URL: http://www.pc.ibm.com/europe/configurators
❒ Yes
❒ No
6. Other Comments
7. Are you a...? (Check one)
❒ PC Dealer
❒ PC Distributor
❒ PC VAR
❒ IBM Employee
❒ IBM Sales Rep.
❒ IBM Customer
❒ Large Account Customer
❒ Other ___________________________________
8. Please fill in your current address and any changes if required.
Current: Name: _______________________________________________
Company: ____________________________________________
Address: _____________________________________________
City: _______________ ___________Postcode:_____________
Country: ____________ Telephone: _______________________
9. Do you know anyone else that should get the IBM Configuration and
Options Guide?
Name: _______________________________________________
Company: ____________________________________________
Address: _____________________________________________
City: _______________ ______________Postcode__________
Country: __________________ Telephone:__________________
You can fax us at +44 (0) 1256 343964
Or mail it to us at:
IBM xSeries / Netfinity Configurator Team
Mailpoint AL10N, Alencon House
Alencon Link
Basingstoke
RG21 7EJ
UK
This page left intentionally blank
Table of Contents
Positioning of Configurator Aids............................................................................................... .................5
Server Product Positioning .........................................................................................................................6
IBM xSeries and Netfinity Selection Guide ...................................................................................... .........8
IBM xSeries and Netfinity Selection Guide ...................................................................................... .........9
Appliance Server and Business Model Summary.....................................................................................10
IBM xSeries 200 ....................................................................................................................................12
IBM xSeries 220 ...............................................................................................................................20
IBM xSeries 230 and Netfinity 5100 ........................................................................................................26
IBM xSeries 240 and Netfinity 5600 .................................................................................................34
IBM xSeries 330 .......................................................................................................................................42
IBM xSeries 340 and Netfinity 4500R .....................................................................................................48
IBM Netfinity 1000 Value Model Configurator.......................................................................................56
IBM Netfinity 3000 Configurator.............................................................................................................60
IBM Netfinity 3500 M20 Configurator ....................................................................................................66
IBM Netfinity 4000R Configurator ..........................................................................................................72
IBM Netfinity 6000R Configurator ..........................................................................................................76
IBM Netfinity 7100 Configurator.............................................................................................................84
IBM Netfinity 7600 Configurator.............................................................................................................92
IBM Netfinity 8500R Configurator ........................................................................................................100
IBM Netfinity EXP200 Configurator .....................................................................................................110
IBM EXP300 Configurator.....................................................................................................................114
IBM FAStT200 (HA) Configurator ........................................................................................................118
IBM FAStT EXP500 Configurator.........................................................................................................120
Fibre Array Solutions..............................................................................................................................122
IBM Netfinity NetBAY3/NetBAY3E Stackable Enclosure ...................................................................136
IBM Netfinity Rack Cabinet and Options ..............................................................................................138
Appendix A: Tape Drive Attributes........................................................................................................142
Appendix B: Tape Library Attributes ....................................................................................................144
Appendix C: UPS Runtime Estimate (minutes) ....................................................................................146
Appendix D: Cables - Storage Units - Controllers .............................................................................148
Appendix E: IBM Serial I/O ..................................................................................................................150
Appendix F: IBM ServicePacs for Hardware Maintenance ...................................................................151
Important Notes ......................................................................................................................................152
Positioning of Configurator Aids
There are several sources of configuration assistance available which complement one another by providing aid at different levels and with different deliverables.
Any combination of the configurators should be used depending on the situation. Always verify your hardware configurations with
Network Operating System compatibility by accessing the Proven compatibility pages on the World Wide Web at URL http:// www.pc.ibm.com/us/compat
OrderBUILDER Configurator: - a 32-bit Windows application containing local part numbers and prices, enabling the user to configure systems
for all PSG brands. Configurations can be added to a formatted Quote and then either printed directly from OrderBUILDER or exported to another application. OrderBUILDER provides coverage for 29 country versions and weekly update files are distribuuted via the Web and Lotus Notes. See
Distribution and Contact information below.
Spreadsheet Configurator:-
a quick, easy to use tool that incorporates local part numbers and prices in 19 country versions. Euro pricing is also included and the tool enables the user to quickly perform most System and Rack configurations with onscreen guidance provided. It is available in either Microsoft Excel or Lotus 1-2-3 formats and updated versions are distributed monthly via the Web and Lotus Notes.
Rack Configurator:- a graphical Windows application that can be used to configure solutions for the 42U and NetBAY22 Rack Units. It assists the
user to decide optimum placement of items taking into account space, power and weight factors. It provides cabling recommendations and supplies detailed specification sheets, parts lists and floor plans. The Rack Configurator is distributed in one European version and is updated inline with new product announcements.
Configuration and Options Guide (this document!):- produced in Adobe Acrobat (.PDF) format that can be printed and used as hardcopy or
viewed onscreen using Acrobat Reader. This configurator contains the complete range of currently marketed xSeries and Netfinity products and gives, for example, information on which options are required to achieve total amounts of memory or storage, while indicating prerequisite items such as cables. This is a powerful, complete, yet easy to use tool that is produced in one European version. Updated versions are available monthly without pricing.
Tape Sizer - Total Cost of Ownership Tool
:-
this spreadsheet is intended to help evaluate the three-year total cost of ownership estimation for different tape formats, based on the following factors - drive performance, media usage, cartridge changing costs, cleaning fre quency, cleaning cartridge usage. It is produced in Microsoft Excel format only, but can be loaded into Lotus 1-2-3, although formatting and use of navigation links will be affected. The pricing used for the comparison between different solutions is Estimated Selling Price (ESP).
The information contained in this document has not been submitted to any formal IBM test. The following paragraph does not appl y to the United
Kingdom or any country where any such provisions are inconsistent with local law.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW DISCLAIMER OF EXPRESS OR IMPLIED WARRANTIES IN CERTAIN TRANSACTIONS.
THEREFORE, THIS STATEMENT MAY NOT APPLY TO YOU. THERE IS NO GUARANTEE THAT IBM WILL MARKET ANY PARTICULAR PRODUCT
IN YOUR COUNTRY.
The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability to evaluate and integrate them into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adapt these techniques to their own environments do so at their own risk. The sample configurations contained within this document are for illustratio n only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements.
Configurator Distribution
All Users
:
Internet: http://www.pc.ibm.com/europe/configurators OrderBUILDER Updates, latest versions of Spreadsheet Configurator, Configuration and Options Guide, Rack Configurator, Tape Sizer.
Business Partners:
Lotus Notes: PC PartnerInfo:- Marketing Essentials Database - OrderBUILDER Updates, Spreadsheet Configurator, Configuration and Options Guide, Rack Configurator, Tape Sizer; Business Essentials Database - OrderBUILDER Updates, Spreadsheet Configurator.
IBM Internal: IBM EMEA xSeries / Netfinity Intranet site: w3.ibm.com/psg/emea/xseries - OrderBUILDER Application and Updates, Spread-
sheet Configurator, Configuration and Options Guide, Rack Configurator, Tape Sizer.
The OrderBUILDER application is available on CD - to receive your copy, send an e-mail to the address below with your name, company and full address details (not PO Box numbers)
For further information contact:- e-mail: [email protected]
Notes Mail: EMEA PSG-Configuration-Support/UK/IBM@IBMGB
5
Updated
17/10/00
Server Product Positioning
IBM xSeries and Netfinity Servers
Increasing:
Performance
Capacity
Availability
File and
To access information on the World Wide Web, use address: http://www.pc.ibm.com
Number of Clients
6
Updated
17/10/00
7
Updated
17/10/00
When in a competitive situation, this table suggests the appropriate IBM xSeries or Netfinity server to bid against other vendors’ equipment. However, as an IBM business partner, you may determine that customer specific requirements may make an alternative IBM solution a better choice
8-way
4-way
2-way
Uni
Value
IBM: xSeries 220,
Netfinity 3500 M20
Compaq: ProLiant ML350
Dell: PowerEdge 1300
HP: NetServer E60
IBM: xSeries 200,
Netfinity 1000
Compaq: ML330
Dell: No Offering
HP: No Offering
Price Performance
IBM: Netfinity 7100
Compaq: ProLiant 5500,
ML570
Dell: PowerEdge 6400
HP: NetServer LH4
IBM: xSeries 230,
Netfinity 5100
Compaq: ProLiant ML370
Dell: PowerEdge 2400
HP: NetServer LC2000
IBM: Netfinity 3000
Compaq: ProLiant 400
Dell: No Offering
HP: No Offering
Mission Critical
IBM: Netfinity 8500R
Compaq: ProLiant 8000
Dell: No Offering
HP: NetServer LH 6000,
LT6000R
IBM: Netfinity 7600
Compaq: No Offering
Dell: No Offering
HP: NetServer LXr 8000
IBM: xSeries 240,
Netfinity 5600
Compaq: ProLiant ML530
Dell: PowerEdge 4400
HP: NetServer LH 3000
Rack Optimized
IBM: Netfinity 8500R
Compaq:ProLiant 8500
Dell: PowerEdge 8450
HP: NetServer LXr 8000
IBM: Netfinity 6000R
Compaq: ProLiant 6400, DL580
Dell: PowerEdge 6450
HP: NetServer LH4r
IBM: xSeries 330, 340,
Netfinity 4000R, 4500R
Compaq: ProLiant DL380, DL360
Dell: PowerEdge 2450
HP: NetServer LPr
IBM xSeries and Netfinity Selection Guide
.
This chart represents general guidelines for selecting the appropriate server based on the number of users that can be supported in a particular application environment. This chart is for general guidance since each customer environment is unique and is unlikely to be precisely represented by any of the specific applications in the chart, but by using the chart, a reasonable approximation can be derived. External Storage Units are utilized when internal capacities are exceeded. Utilize the chart by following the steps outlined on the following page. These are not published benchmark results. Access http://www.ibm.com/pc/us/techlink/srvperf.html to obtain benchmark data.
Application/Expectation of Maximum # of Users
# of Users
DB Transaction Processing
Select, Update and Delete;
# of processors
Memory (MB)
Does not include image or
Decision Support
# Hard Disk Drives
# RAID Adapters
#Network Connections
# of Users
File and Print applications - cut number of users in half).
# of Processors
Application is stored locally.
(For server stored
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# 100Mbps Ethernet
Connections
# of Users
# of Processors
Lotus Notes
10% Power Users 40% Mail
50% Mail & DB
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
# of Users
Netfinity 1000
Value Model
Uni-Pentium
III 700 MHz/
256KB
50
1
384
3
-
1
100
1
512
3
-
> 2
100
1
384
3
-
> 1
600
Netfinity 3000
Uni-
Pentium III
700 MHz/
256 KB
1125
1
768
12 to 18
> 1 SCSI
1
1000
1
768
4 to 8
> 1 SCSI
> 2
675
1
768
4 to 8
> 1 SCSI
> 1
700 xSeries 200
Uni-
Pentium III
866 MHz/
256 KB
1280
1
768
12 to 18
>1 SCSI
1
1000
1
768
4 to 8
> 1 SCSI
> 2
740
1
1 GB
4 to 8
> 1 SCSI
> 1
1980
Netfinity 3500
M20 Dual
Pentium III
800 MHz/
256 KB
1950
2
1 to 2 GB
36 to 48
>1
1
2000
2
1 to 2 GB
16 to 24
1 to 2
4
1800
2
2 GB
16 to 20
1
>2
850 xSeries 220
Dual
Pentium III
933 MHz/
256 KB
1325
1
768
12 to 18
>1
1
1000
1
768
4 to 8
1
4
735
1
768
4 to 8
1
>2
2200 xSeries 330
Dual
Pentium III
1 GHz/
256 KB
2170
2
1 to 2 GB
36 to 48
>2
1
2100
2
1 to 2 GB
20 to 30
1 to 2
4
2000
2
2GB
20 to 30
1 to 2
>2
2310
Microsoft Exchange
Server
5.5
100% Med Users
30 MB Mailbox
# of Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
1
256
3
1
384
3 to 4
2
1 GB
9
1
512
3 to 4
2
1 GB
10
2
2 GB
10
# Network Connections
SAP 3-Tier Distributed
Ver 4.0b
Processing
Sales and Distribution
Application
(Minimum of 16-20 Servers)
See Note 1.
# of Users
# of Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
SAP Central
Ver 4.0b
Processing
Sales and Distribution
Application
(One Server)
See Note 1.
# Users
# Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
Hot-Swap HDD Bays
Hot-Plug PCI Slots
Hot-Swap Power
High Availability
Features
Hot-Swap Fans
RAID
Clustering Support
Sys. Mgt. Processor
Max # Processors
Max Memory (MB)
Other Distinquishing
Features
Max Int. Storage (GB)
Max Int. Storage (GB) with
Int. Tape drive
Available PCI Slots
19” Rack Models
NetBAY3x Support
-
-
1
768
30.3
-
-
-
-
-
-
-
-
-
-
-
> 1
-
-
-
N/A
-
N/A
-
30.3
3
-
-
-
Opt.
1
768
145.6
-
-
-
-
-
Opt.
> 1 SCSI
> 1
-
-
-
N/A
-
-
-
-
-
N/A
-
109.2
2
-
-
-
-
2
2 GB
145.6
-
-
1
-
-
Opt.
75
1
-
-
-
-
1
>1
-
N/A
1 GB
12
>1
145.6
5
-
-
-
Opt.
1
768
145.6
-
-
1
-
-
Opt.
> 1 SCSI
>1
-
-
-
N/A
-
-
139
2
1 GB
12 to 24
>1
109.2
5
-
-
-
Opt.
1
768
145.6
-
-
1
-
-
Opt.
> 1 SCSI
>1
-
-
-
N/A
80
1
-
-
1 GB
12
>1
109.2
5
-
-
-
-
2
2 GB
72.8
-
-
1
-
-
Opt.
-
-
160
2
-
-
1
>2
-
N/A
1 GB
12 to 24
>1
N/A
2
-
-
1. This information for SAP is a guide only. Refer to the IBM SAP R/3 Advanced Sizing and Planning Questionnaires at: www.pc.ibm.com/europe/configurators , or to your IBM representative, for more information.
8
Updated
17/10/00
To access information on the World Wide Web, use address: http://www.pc.ibm.com
IBM xSeries and Netfinity Selection Guide
9
Updated
17/10/00
Application/Expectation of
Maximum # of Users
# of Users
DB Transaction Processing
Select, Update and Delete;
Does not include image or
Decision Support
# of processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
#Network Connections
# of Users
File and Print # of Processors
Application is stored locally.
(For server stored
Memory (MB)
# Hard Disk Drives applications - cut number of users in half).
# RAID Adapters
# 100Mbps Ethernet Conn.
# of Users
# of Processors
Lotus Notes
10% Power Users 40% Mail
50% Mail & DB
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
# of Users
Microsoft Echange
Server 5.5
100% Med Users
30 MB Mailbox
# of Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
SAP 3-Tier Distributed
Ver 4.0b
Processing
Sales and Distribution
Application
(Minimum of 16-20 Servers)
See Note 1.
# of Users
# of Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
SAP Central
Ver 4.0b
Processing
Sales and Distribution
Application
(One Server)
See Note 1.
High Availability
Features
Other Distinquishing
Features
# Users
# Processors
Memory (MB)
# Hard Disk Drives
# RAID Adapters
# Network Connections
Hot-Swap HDD Bays
Hot-Plug PCI Slots
Hot-Swap Power
Hot-Swap Fans
RAID
Clustering Support
Sys. Mgt. Processor
Max # Processors
Max Memory (MB)
Max Int. Storage (GB)
Max Int. Storage (GB) with
Int. Tape drive
Available PCI Slots
19” Rack Models
NetBAY3x Support
X
X
X
X
X
245
4
>2 GB
24 to 36
>2
1
X
X
4
16GB
364
4 GB
40 to 50
>3
>2
3350
4
>4 GB
48 to 60
>3
1
245
4
>2 GB
24 to 36
>2
1
X
X
4
16GB
364
X
Opt.
X
X
Opt.
>3 GB
30 to 40
>2
>2
3150
4
>4 GB
48 to 60
>3
1
312
4
>2 GB
24 to 36
>2
1
X
X
X
X
Opt.
-
X
4
16 GB
218.4
3 GB
30
2
>2
4300
4
>4 GB
48 to 60
>3
1
180
2
1 to 2 GB
12 to 24
>1
1
X
X
X
X
Opt.
X
X
2
4 GB
218.4
2 GB
12
2
>1
2800
2
1 to 2 GB
24 to 36
>2
1
162
2
1 to 2 GB
12 to 24
>1
1
X
-
Opt.
-
Opt.
X
X
2
4 GB
218.4
2 GB
12
1
>1
2790
2
1 to 2 GB
24 to 36
>2
1
160
2
1 GB
12 to 24
>1
1
X
-
X
X
Opt.
X
X
2
4 GB
218.4
2 GB
9
1
>1
-
N/A
-
-
-
xSeries 340 /
Netfinity 4500R
Dual
Pentium III
1 GHz/
256 KB xSeries 230
Netfinity 5100
Dual
Pentium III
1 GHz/
256 KB xSeries 240
Netfinity 5600
Dual
Pentium III
1 GHz/
256 KB
Netfinity 6000R Netfinity 7100
Quad
Pentium III
Quad
Pentium III
Xeon
700 MHz/
2048 KB
Xeon
700 MHz/
2048 KB
Netfinity 7600
Quad
Pentium III
Xeon
700 MHz/
2048 KB
2720
2
2720
2
3650
2
6420
4
6420
4
6420
4
2 to 3 GB
48 to 64
>2
1
2100
2
1 to 2 GB
20 to 30
1 to 2
4
2110
2 to 3 GB
48 to 64
>2
1
2100
2
1 to 2 GB
20 to 30
1 to 2
4
2110
4 GB
80 to 140
>3
2 to 3
2100
2
1 to 2 GB
20 to 30
1 to 2
4
2110
4 GB
80 to 140
>4
2 to 3
5000
2
2 to 4 GB
50 to 90
4
8
4215
4 GB
80 to 140
>5
2 to 3
5000
2
2 to 4 GB
50 to 90
>4
8
4215
4 GB
80 to 140
>5
2 to 3
5000
2
2 to 4 GB
50 to 90
>4
8
4215
2
2 to 3 GB
20 to 30
1 to 2
>2
2310
2
2 to 3 GB
20 to 30
1 to 2
>2
2310
2
2 to 3 GB
20 to 30
1 to 2
>2
2310
4
3 GB
20 to 30
2 to 3
>3
6400
4
3 GB
20 to 30
2 to 3
>3
6600
4
3 GB
20 to 30
2 to 3
>3
7000
2
109.2
5
X
-
2
218.4
5
X
-
2
218.4
5
X
-
4
N/A
6
X
-
4
364
6
X
X
4
364
5
X
X
Netfinity 8500R
Eight-Way
Pentium III
Xeon
700 MHz/
2048 KB
10,315
8
4 GB
180 to 250
>5 or Fibre
2 to 3
6000
3-4
4 GB
75 to 150
>4 or Fibre
10
6695
8
4 GB
30 to 40
>3
>4
8000
1. This information for SAP is a guide only. Refer to the IBM SAP R/3 Advanced Sizing and Planning Questionnaires at: www.pc.ibm.com/europe/ configurators , or to your IBM representative, for more information.
2. 8500R - with a Rack-to-Tower kit installed.
8
N/A
12
X
X
2
375
8
>4 GB
24 to 36
>2
1
X
X
X
X
Opt.
X
X
8
32 GB
72.8
4 GB
40 to 50
>3
>2
5100
8
>4 GB
48 to 60
>3
1
Procedure for Server Selection Guidance Chart
File and Print numbers are Novell Netware-based with all others based on Microsoft Windows NT. Other Networking Operating System (NOS) results could vary.
Extensive SAP sizings are available from IBM/SAP Competency Centres. Contact your IBM Marketing Representative for additional information .
Step 1: Determine which application (row) most closely represents the customer’s environment.
Step 2: Move from left to right along the row (chosen in Step 1) noting which columns contain numbers that are equal to or greater than the maximum customer’s planned number of users.
Step 3: Move up the columns (chosen in Step 2) to the top row to determine which IBM xSeries or Netfinity Servers should be considered as possible solutions.
Step 4: Evaluate other features such as storage, memory capacity, high availability components, number of available expansion slots, etc., which are unique to each server, in order to determine which is the most appropriate to recommend.
For your reference, configuration information corresponding to the number of users is also provided.
Appliance Server and Business Model Summary
APPLIANCE SERVERS
xSeries 130 xSeries 135 xSeries 150 xSeries 150
-
-
-
-
K41YXxx
K41XXxx
K833Yxx
K83XYxx
BUSINESS MODELS
xSeries 330 xSeries 330 xSeries 330 xSeries 330 xSeries 340 xSeries 230 xSeries 240
-
-
-
-
-
-
-
K412Gxx
K432Gxx
K442Gxx
K452Gxx
K66SGxx
K862Gxx
K481Gxx
800
3
800
3
800
3
800
3
800
3
866
3
933
3
1GHz
3
1GHz
3
1GHz
3
1GHz
3
1/2 256
1/2 256
1/2 256
2/2
2
256
256MB
R
/1GB
1,4
256MB
R
/1GB
1,4
256MB
R
/2GB
4
1GB
R
/2GB
4
Rack(1U) 1/1 2 x 10/100
OB
Rack(1U) 1/1 2 x 10/100
OB
Tower 2/3 2 x 10/100
17
Rack(5U) 2/3 4 x 10/100
18
1 x 37L7204
1 x 37L7204
37L6091 3 x 37L7206
19
37L6889 6 x 37L7206
19
4/1 2/1
14
4/1 2/0
14
NOTE: 15
NOTE: 16
10/5
10/2
5/3 NOTE: 20
5/1 NOTE: 21
1/2 256 512MB
R
/4GB
4,10
1/2 256 512MB
R
/4GB
4,10
1/2 256 512MB
R
/4GB
4,10
1/2 256 512MB
R
/4GB
4,10
1/2
1/2
1/2
256
256
256
256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
512MB
R
/4GB
4,6
Rack(1U) 1/1 2 x 10/100
OB
Rack(1U) 1/1 2 x 10/100
OB
Rack(1U) 1/1 2 x 10/100
OB
Rack(1U) 1/1 2 x 10/100
OB
Rack(3U)
Tower
Tower
1/2
1/3
2/3
10/100
OB
10/100
OB
10/100
OB
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
2 x 37L7205
2 x 37L7205
2 x 37L7205
2 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
4/0
4/0
4/0
4/0
8
9
/3
10/5
10/5
2/1
2/1
2/1
2/1
K411Yxx
K431Yxx
K441Yxx
K451Yxx
5/4 K66RYxx
5/4 K861Yxx
5/4 K481Yxx
5100
5600
5600
5600
6000R
6000R
7100
7100
4500R
4500R
4500R
4500R
5100
5100
5100
7100
7100
7100
7100
7100
7100
-
-
-
-
-
-
-
-
-
-
-
854G9xx
454G9xx
464G9xx
474G9xx
-
-
23GG9xx
24GG9xx
24/10/00 65TG9xx
24/10/00 66TG9xx
614G9xx
634G9xx
644G9xx
654G9xx
824G9xx
834G9xx
844G9xx
-
-
67TG9xx
68TG9xx
24/10/00 65GG9xx
24/10/00 66GG9xx
-
-
67GG9xx
68GG9xx
800
3
866
3
700
5
700
5
550
5
550
5
700
5
700
5
700
5
700
5
550
5
550
5
933
3
800
3
866
3
933
3
733
3
800
3
866
3
933
3
733
3
1/2
1/2
1/2
1/2
256
256
256
256
256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
1/2 256
1/2 256 256MB
R
/4GB
4,8
256MB
R
/4GB
4,8
1/2 256
2/4
2
2/4
2
2/4
2
2/4
2
2/4
2
2/4
2
2/4
2
2/4
2
2/4
2
1/2 256
1/2 256
256MB
R
/4GB
4,8
512MB
R
/4GB
4,6
1/2 256 512MB
R
/4GB
4,6
1/2 256
2/4
2
1024
512MB
512MB
R
R/
/4GB
4,6
16GB
11
2048 512MB
R/
16GB
11
512 512MB
7
/16GB
1024
1024
2048
512
1024
1024
2048
512MB
7
/16GB
512MB
7
/16GB
512MB
7
/16GB
512MB
7
/16GB
512MB
7
/16GB
512MB
7
/16GB
512MB
7
/16GB
Rack(3U) 1/2
Rack(3U) 1/2
Rack(3U) 1/2
Rack(3U) 1/2
Tower 1/3
Tower
Tower
1/3
1/3
Tower
Tower
Tower
Tower
Rack(4U) 1/3
Rack(4U) 1/3
Tower
Tower
2/4
2/4
1/3
2/3
2/3
2/3
Tower
Tower
2/4
2/4
Rack(8U) 2/4
Rack(8U) 2/4
Rack(8U) 2/4
Rack(8U) 2/4
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
10/100
OB
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
37L6091
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
8
9
/3
8
9
/3
8
9
/3
8
9
/3
10/5
10/5
10/5
10/5
10/5
10/5
5/4
5/4
5/4
5/4
5/4
5/4
5/4
5/4
5/4
5/4
61RYMxx
63RYTxx
64RYTxx
65RYTxx
821YExx
831YExx
841YExx
851YExx
451YExx
461YExx
3 x 37L7205 10/5 5/4 471YExx
3 x 37L7205 8
12
/3 6/5 21RYMxx
3 x 37L7205 8
12
/3 6/5 22RYMxx
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
14/9
14/9
14/9
14/9
6/5
6/5
6/5
6/5
611YExx
621YExx
631YMxx
641YMxx
3 x 37L7205
3 x 37L7205
3 x 37L7205
3 x 37L7205
14/9
14/9
14/9
14/9
6/5
6/5
61RYExx
62RYExx
6/5 63RYMxx
6/5 64RYMxx
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
10
Updated
17/10/00
* Business Models are standard models shipped with additional options already installed. They provide popular starting configurations that give price&packaging advantages for easy installation. Appliance Servers are pre-configured with a pre-loaded, tuned, software stack to allow simple ‘out-of-the-box’ installation and instant enhancement of Web server capabilities.
1. These pre-configured, pre-loaded Appliance Servers support limited expansion capability.
2.One additional processor (of the same type and speed as the standard one) is supplied already installed with this Business Model.
3. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133MHz Front-side bus (FSB).
4. High-speed 133MHz SDRAM.
5. Intel Pentium III Xeon processor with advanced transfer (full speed) L2 cache.
6. One additional 256MB memory option P/N 33L3060 is supplied already installed with this Business Model.
7. The standard memory is replaced in these models with four 128MB memory options P/N 33L3113 - already installed.
8. The standard memory is replaced in this model with one 256MB RDIMM P/N 33L3125 - already installed
9. Assumes installation of optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) which converts the two available removable media bays into three slimline (SL) hot-swap bays.
10. One additional 256MB memory option P/N 33L3144 is supplied already installed with this Business Model.
11. Advanced Chipkill ECC memory - corrects two, three or four-bit errors.
12. Assumes installation of optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) which enables hot-swap bays 4 to 6.
13. Not available from IBM after this date: Business Partner inventory may be available.
14. The xSeries 130 Appliance Server supports the addition of 1 x P/N 3430301 Gigabit Ethernet Adapter only. The xSeries 135 Appliance Server does not support the addition of any adapters. Additional options support is limited for both of these servers.
15. The xSeries 130 Web Hosting Appliance Server is pre-loaded with a tuned Windows Powered operating system and is ready to use ‘out-of-the-box’. Pre-loaded software includes: Windows Powered OS, Microsoft Internet Information Services 5.0, Netfinity Web Server Accelerator V2.0, Advanced appliance configuration utility, Netfinity
Director 2.12 UM Server Extensions (agent version).
16. The xSeries 135 Web Hosting Appliance Server is pre-loaded with a tuned Turbo Linux operating system and is ready to use ‘out-of-the-box’. Pre-loaded software includes:
Turbo Linux OS, IBM HTTP Server, Appliance System Management, Advanced appliance configuration utility. The xSeries 135 Appliance Server pre-loaded software stack does not support the onboard Advanced System Management Processor
17. The xSeries 150 Network Attached Storage Appliance Server P/N K833Yxx (Tower model) includes one 10/100 onboard Ethernet controller and one additional 10/100
Ethernet adapter. Additional options support is limited for this server.
18. The xSeries 150 Network Attached Storage Appliance Server P/N K83XYxx (Rack model) includes one 10/100 onboard Ethernet controller and three additional 10/100
Ethernet adapters. Additional options support is limited for this server.
19. Only the Rack model P/N K83XYxx supports external storage via the attachment of an EXP300 enclosure.
20. The xSeries 150 Network Attached Storage Appliance Server P/N K833Yxx is pre-loaded with a tuned Windows Powered operating system and is ready to use ‘out-of-thebox’. Pre-loaded software includes: Windows Powered OS, Netfinity Director 2.12 UM Server Extensions (agent version), ServeRAID Manager RAID configuration and monitoring utilities, Advanced appliance configuration utility, Columbia Data Products Open Transaction Manager. This model is designed and configured to be a Workgroup
Model. It includes a ServeRAID 4L adapter and 3 x 36.4GB Ultra160 hot-swap disks.
21. The xSeries 150 Network Attached Storage Appliance Server P/N K83XYxx is pre-loaded with a tuned Windows Powered operating system and is ready to use ‘out-of-thebox’. Pre-loaded software includes: Windows Powered OS, Netfinity Director 2.12 UM Server Extensions (agent version), ServeRAID Manager RAID configuration and monitoring utilities, Advanced appliance configuration utility, Columbia Data Products Open Transaction Manager. This model is designed and configured to be a Departmental
Model. It includes a ServeRAID 4H adapter and 6 x 36.4GB Ultra160 hot-swap disks
11
Updated
17/10/00
IBM xSeries 200
xSeries 200 At-A-Glance Chart
K811Xxx
K812Xxx
K813Xxx
K841Xxx
K842Xxx
K851Xxx
3
-
-
-
-
-
-
667
1
667
1
667
1
800
4
800
4
866
4
866
4
1/1
1/1
1/1
1/1
1/1
1/1
128
128
128
256
256
256
64MB/1.5GB
64MB/1.5GB
128MB/1.5GB
64MB/1.5GB
128MB/1.5GB
64MB/1.5GB
Tower
Tower
Tower
Tower
Tower
Tower
1/1
1/1
1/1
1/1
1/1
1/1
-
-
-
-
-
-
10/100
10/100
10/100
10/100
10/100
10/100
IDE
IDE
4/2
4/1
15/90GB
2
15/90GB
2
U160 4/2 9.1/145.6GB
2
48X-20X 7/4
48X-20X 7/3
48X-20X 7/4
3
IDE 4/2 15/90GB
2
U160 4/2 9.1/145.6GB
2
IDE 4/2 15/90GB
2
U160 4/2 9.1/145.6GB
2
48X-20X 7/4
48X-20X 7/4
48X-20X 7/4
48X-20X 7/4 K852Xxx
-
1/1 256 128MB/1.5GB
Tower 1/1 10/100
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Intel Celeron processor.
2. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed), with the largest supported IBM hard disk drive.
3. This model is configured with an IBM 10/20GB TR5 Internal IDE Tape Drive P/N 20L0549 as standard.
4. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133 MHz front-side bus (FSB).
xSeries 200 Processor Upgrades
Part Number Processor Upgrades 256 KB Advanced Transfer Cache Processor Speed
Upgrade
1
21P9539
10K3818
800 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
866 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
All K81xXxx
All K81xXxx...K84xXxx
1.Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/ pc/support and enter machine type “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
5/4
5/5
5/4
5/5
5/5
5/4
5/5
DIMM Socket
DIMM Socket
DIMM Socket
Part Number
33L3079
33L3081
33L3083
33L3085
Memory Description
64MB 133MHz ECC SDRAM DIMM Memory
128MB 133MHz ECC SDRAM DIMM Memory
256MB 133MHz ECC SDRAM DIMM Memory
512MB 133MHz ECC SDRAM Unbuffered
DIMM Memory xSeries 200 Memory Configurator
Total System Memory
1
Standard
Model with 64MB
Standard
Model with 128MB
DIMMs
64 MB
P/N 33L3079
128 MB
P/N 33L3081
256 MB
P/N 33L3083
512 MB
P/N 33L3085
128 MB
192 MB
320 MB
384 MB
2
576 MB
768 MB
2
1088 MB
192 MB
256 MB
384 MB
-
640 MB
768 MB
2
1152 MB
1
2 or
-
1
2 or
3
1
2 or
3
1
2
1536 MB
(max)
2
1536 MB
2
3
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller DIMMs may provide a more cost-effective alternative to using larger DIMMs. Select the desired total memory from the appropriate column (Standard Model 64MB or 128MB), then select a quantity in that row from one of the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard DIMMs.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
12
Updated
17/10/00
13
Updated
17/10/00 xSeries 200 Internal Hard Disk Drive and External Storage Configurator
Bay
1
2
3
4
5...7
Form
Factor
133 mm
(5.25”)
133 mm
(5.25”)
89 mm
(3.5”)
89mm
(3.5”)
89mm
(3.5”)
Total
Internal
Storage
1
7200RPM Ultra160 SCSI Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8204)
18.2 GB
(P/N 00N8205)
36.4 GB
(P/N 00N8206)
9.1GB
18.2GB
27.3GB
36.4GB
45.5GB
54.6GB
1
2 or
3
-
1 and
Standard on Base SCSI Models (7200 rpm)
-
1
-
2 or
2
-
-
-
1
-
81.9GB
91GB
100.1GB
145.6GB
(max)
2
-
1 and
-
-
-
-
1 and
-
2
2
2
4
2
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed) with the largest supported IBM hard disk drive.
CD-ROM
Bay 2
Diskette
Bay 4
Bay 5
Bay 6
Bay 7
10,000 RPM Ultra160 SCSI Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8207)
18.2 GB
(P/N 00N8208)
36.4 GB
(P/N 00N8209)
1
2 or
Standard on Base SCSI Models (7200 rpm)
-
1
3
-
1 and
-
2 or
2
-
1 and
-
-
-
1 and
-
-
1
-
-
-
2
2
2
4
2
Total
Internal
Storage
1
7200RPM IDE Hard Disk Drives (HDDs)
2
15 GB
(P/N 19K4460)
20.4 GB
(P/N 19K4461)
30 GB
(P/N 00N8203 )
15GB
30GB
45GB
55.8GB
75GB
90GB (max)
4
2
3
1
-
-
-
or
Standard on EIDE Base Models
-
-
2
3
-
-
This table does not represent all possible hard drive configurations.
-
1
-
2
3
3
4
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +0.2 GB unless otherwise noted.
2. The xSeries 200 EIDE controllers support a maximum of four IDE devices per machine including CD-ROM drives, hard disks and IDE tape drives.
3. Not a supported configuration on model P/N K812Xxx which includes an IBM 10/20 GB TR5 Internal IDE Tape
Drive P/N 20L0549 as standard.
4. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed) with the largest supported IBM hard disk drive.
Height
HH
HH
SL
SL
SL
Front
Access yes yes yes yes yes
Usage
IDE CD-
ROM open
1, 2
Diskette open open
Part
Number
Description
IDE Hard Disk Drives (HDD)
1, 2
19K4460 15GB 7200 rpm ATA/100 (EIDE) HDD
19K4461 20.4GB 7200 rpm ATA/100 (EIDE) HDD
00N8203 30GB 7200 rpm ATA/100 (EIDE) HDD
Ultra160 Hard Disk Drives (HDD)
2
RPM Height
7200
7200
7200
SL
SL
SL
Bays
Supported
4...7
4...7
4...7
Max.
Qty
3
3
3
3
3
3
1. Supports removable media devices only. Hard drives are not supported.
2. 10/20GB TR5 Internal IDE Tape Drive P/N 20L0549 is standard in model P/N K812Xxx.
00N8204 9.1GB 7200 rpm Ultra160 SCSI HDD
00N8205 18.2GB 7200 rpm Ultra160 SCSI HDD
00N8206 36.4GB 7200 rpm Ultra160 SCSI HDD
00N8207 9.1GB 10,000 rpm Ultra160 SCSI HDD
00N8208 18.2GB 10,000 rpm Ultra160 SCSI HDD
00N8209 36.4GB 10,000 rpm Ultra160 SCSI HDD
External Storage Expansion Units
4
00N6xxx
7
Netfinity EXP200 Storage Expansion Unit
5
37L5857
37L0xxx
19K11xx
8
9
Netfinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant Power
Supply
EXP300 Storage Expansion Unit
6
09N7296 EXP300 Rack-to-Tower Conversion Kit
7200
7200
7200
10,000
10,000
10,000
SL
SL
SL
SL
SL
SL
Form Factor
Rack (3U)
4...7
4...7
4...7
4...7
4...7
4...7
-
-
Rack (3U)
-
4
4
4
4
4
4
1.The xSeries 200 EIDE controllers support a maximum of four IDE devices per machine including CD-ROM drives, hard disks and IDE tape drives.
2. Mixing of IDE and SCSI hard disk drives is not supported.
3. Limited to 2 drives in model -12X due to installed tape drive option.
4. Not supported by the external SCSI port included in SCSI models. Select an optional SCSI controller then refer to Appendix D:
Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
5. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply and standard country power cord. Optional hot-swap Netfinity EXP200 350W Redundant Power Supply (P/N 37L0xxx) includes an additional standard country power cord. To convert an EXP200 to match the system’s tower form factor, Netfinity EXP200 Rack-to-Tower
Conversion Kit P/N 37L5857 is required.
6. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500 W redundant power supplies, each with its own standard country power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit P/N
09N7296 is required.
7. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South Africa/
English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication Country Kits are included throughout.
8. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
9.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/English,
58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication Country Kits are included throughout.
xSeries 200 Internal SCSI Cabling
EIDE Models
In xSeries 200 models using the EIDE interface for storage device attachment, a two-drop cable is used to attach the standard 15 GB EIDE HDD to one of the EIDE connectors. A second EIDE controller provides the interface for the IDE CD-ROM drive. A two-drop cable connects the IDE controller to the IDE CD-ROM. Up to two additional EIDE or IDE devices can be installed (one off of each controller).
SCSI Models xSeries 200 models with a SCSI adapter are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator at one end of the cable. The other end of the cable is attached to the internal 68-pin connector of the standard Ultra160 SCSI adapter. SCSI devices can be connected to any of the five cable connectors. If 8-bit
(narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.
Other Configuration Alternatives
In the case where a RAID controller is used to support internal drives in a xSeries 200, the standard cable is moved from the onboard controller to the RAID adapter. To connect a tape drive to the onboard or other supported SCSI controller, use the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit
(P/N 10K2340).
External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
14
Updated
17/10/00
15
Updated
17/10/00
Part
Number
Description
Storage Controllers
2
37L6091 ServeRAID-4L Ultra160 SCSI Controller
3
37L6080 ServeRAID-4M Ultra160 SCSI Controller
4
19K4646 PCI Wide Ultra160 SCSI Adapter
7
02K3454 PCI Fast/Wide Ultra SCSI Adapter
Networking
5
Ethernet
09N9901 10/100 EtherLink Server Adapter by 3Com
34L0301 Netfinity Gigabit Ethernet SX Adapter
19K4401 Netfinity Gigabit Ethernet Adapter
34L4601 Netfinity 10/100 Ethernet Security Adapter
Token Ring
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
34L5001 16/4 Token-Ring PCI Management Adapter
Communications
6
37L14xx Serial I/O SST 8, 16 and 128 Port Adapters
8 xSeries 200 I/O Options
Adapter
Length
Full
Full
Half
Half
Half
Half
Half
Half
Half
Half
PCI
Support
32/64-bit
32/64-bit
32-bit
32-bit
32-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32-bit
Slots
Supported
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1
-
External Connector Access
Half 32-bit 1...5
1. The xSeries 200 has five full-length, 33 MHz PCI expansion slots. The number of available slots is model specific.
2. Some models of the xSeries 200 include a single channel Ultra160 SCSI Adapter with a five drop multi-mode terminated LVD SCSI Cable. All other models include dual-channel EIDE controllers and require an optional SCSI adapter for SCSI functionality. See At-A-Glance for model attributes
3. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection.
External connector is 0.8-mm VHDCI.
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two external 0.8-mm VHDCI Ultra160 connectors.
5. xSeries 200 includes an integrated full-duplex, 10.100 Mbps Ethernet controller.
6. xSeries 200 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A software compatible) and one high-speed parallel port supporting devices using SSP/EPP/ECP protocols adhering to the IEEE 1284 Standard.
7. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilised.
8. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416) may be installed.
xSeries 200 Power, Monitors, Accessories
Part Number
94G7448
Description
Power
1,10
Rack Power Cable Type C12 (3.7m)
10
Free Standing Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 700 SUP072Y
SUP102Y
SUP142Y
14RIxxx
9
30RIxxx
9
37L6862
T3347xx
8
31H2Nxx
8
T32N3xx
8
T274Axx
8
11AG1xx
8
APC Smart-UPS 1000
APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 1400RMB
3,10
APC Smart-UPS 3000RMB
3,10
APC Smart-UPS 5000RMB
4,10
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
6
6
G78 Color Monitor 17” (406.4mm, 16.0” Viewable Image Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable Image Size), stealth black
7
1. The xSeries 200 includes a 330 W voltage sensing power supply and a single standard country power cord.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 200 contains a S-3 Savage-4 LT video adapter with 8Mb of video memory plugged into the standard AGP slot.
6. Installation within a rack requires optional Monitor Compartment (P/N94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard Tray (P/
N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
8. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland,
UK=UK, EU=Europe.
9. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa,
SWS=Switzerland, UKM=United Kingdom, EUR=Europe.
10. The xSeries 200 ships with a standard country power cord. If conversion to Rack format is being carried out, Rack Power Cable P/N 94G7448
(type C12), must be ordered to allow connection to a high voltage UPS or PDU.
Part Number Description
Conversion Kits
09N4300 4Ux20D Tower-to-Rack Kit
6
Rack and NetBAY
1,6
930842P
930842X
9306900
9306910
36L9703
9306200
36L9702
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (Perforated Doors)
Netfinity Rack Extension Kit
Netfinity NetBAY22
NetBAY22 Rack Extension Kit
37L6888
94G7448
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
6
Keyboard and Mouse
2
Space Saver II Keyboard
3, 4
28L36xx
5
1 Rack installation of an xSeries 200 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed here. See IBM Netfinity Rack
Cabinet and Options section for IBM rack supported devices.
2. The xSeries 200 includes both a mouse and non-space saver keyboard.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English,
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
6. The xSeries 200 ships with a standard country power cord. If conversion to Rack format and connection to a high voltage UPS or PDU is being carried out, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
16
Updated
17/10/00
17
Updated
17/10/00 xSeries 200 Tape Options
Part
Number Supported Interface
(bit)
Factor Included Converter
Included.
Ext. Tape
Enclosures
1
20L0549
09N4041
09N4042
00N7991
10/20GB TR5 Internal IDE Tape Drive
2
12/24GB DDS/3 4-mm Internal SCSI
Tape Drive
3,4,5
10/20GB NS Internal SCSI Tape Drive
3,4,5
20/40 GB DDS/4 4-mm Internal Tape
Drive
4,5
2, 4
2
2, 4
2
-
8
8
16 Ultra2
LVD
101.6mm
(3.5” SL or
133mm
(5.25”) HH
89 mm (3.5”)
HH or 133 mm (5.25”)
HH
89 mm (3.5”)
SL or 133 mm (5.25”)
HH
89 mm (3.5”)
HH or 133 mm (5.25”)
HH
-
Y
Y
Y
-
Y
Y
N/A
-
10L7440,
03K8756
10L7440,
03K8756
10L7440,
03K8756
6
10L7440
03K8756
10L7113
External Tape Enclosures
External Half High SCSI Storage Enclosure
7
NetMEDIA Storage Expansion Unit EL
8
NetMEDIA Systems Management Adapter
9
Associated Options
-
-
-
8/16
16
16 LVD
Desktop
Rack
-
N
Y
N
N
N
N
-
-
03K8756
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
Media Bay Tray and LVD Cable Kit
4,6,10
16 LVD/SE External Y N 10L7440
10K2340 16 LVD Internal Y N -
Note: SCSI models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to single- ended performance. SCSI tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to Appendix D:
Cables - Storage Units - Controllers.
2. SCSI models include a two-drop EIDE cable for attachment to the CD-ROM and an optional IDE tape drive. EIDE Model P/N K812Xxx includes 10/20GB TR5 Internal IDE Tape Drive P/N 20L0549 as standard.
3.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode LVD SCSI cable.
4. For RAID configurations (in SCSI models) where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and
LVD Cable Kit P/N 10K2340 is required, to allow attachment of a SCSI Tape Drive to the standard Ultra160 SCSI Adapter.
5. EIDE models require optional PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode LVD SCSI cable, to allow attachment of a SCSI Tape Drive.
6. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop mult-mode terminated LVD cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
7. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin
External Multimode LVD/SE SCSI Terminator P/N 00N7956.
8. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
9. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in an Expansion Unit P/N 03K8756 to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
10. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
xSeries 200 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
K812Xxx
33L3081
19K4461
31H2Nxx
SUP072Y
1. For a total of 192 MB of system memory.
2. For a total of 35.4 GB of internal storage.
Description x200 Celeron 667/128, 64MB, EIDE, 15GB, Tape, 48X
128 MB 133Mhz ECC SDRAM DIMM Memory
1
20.4 GB 7200 rpm ATA/100 (EIDE) HDD
2
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
1
1
1
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this is mind, the the xSeries 200 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing, 192 MB of system memory (expandable to 1.5 GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods are used you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
File and Print Server
Part Number Description
K852Xxx
33L3081
00N8204
00N8205
00N7991
31H2Nxx
SUP072Y x200 Pentium III 866/256, 128MB, Ultra160, 1 x 9.1GB, 48X
128 MB 133 MHz ECC SDRAM DIMM Memory
1
9.1 GB Ultra160 SCSI HDD
2
18.2 GB Ultra160 SCSI HDD
2
20/40GB DDS/4 4-mm Internal Tape Drive
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
1. For a total of 256 MB of system memory.
2. For a total of 54.6 GB of internal storage.
Quantity
1
1
2
1
1
1
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 200 with 256 MB of memory and 54.6 GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage expansion still available. Demanding network traffic is effectively handled by the standard 100 Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Application Server
Part Number Description
K852Xxx
33L3083
37L6091
00N8204
10K2340
09N4042
31H2Nxx
SUP072Y x200 Pentium III 866/256, 128MB, Ultra160, 1 x 9.1GB, 48X
256 MB 133 MHz ECC SDRAM DIMM Memory
ServeRAID-4L Ultra160 SCSI Controller
9.1 GB Ultra160 SCSI HDD
2
Media Bay Tray and LVD Cable Kit
3
10/20 GB NS Internal SCSI Tape Drive
1
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
1. For a total of 384 MB of system memory.
2. For a total of 27.3 GB of internal storage.
3. Cable for dedicated attachment of tape to standard controller.
Quantity
1
1
3
1
1
2
1
1
An application server differs from a file and print server in that it has a higher workload, in providing application serving requirements for users. With this in mind, the xSeries 200 was selected to provide an affordable price point for an application server, with Pentium III processing, 384 MB of system memory (expandable to 1.5 GB), and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
18
Updated
17/10/00
19
Updated
17/10/00
IBM xSeries 220
xSeries 220 At-A-Glance Chart
K521Xxx
K522Xxx
K52AXxx
K531Xxx
K532Xxx
K53AXxx
K541Xxx
K542Xxx
-
-
-
-
-
-
-
-
800
800
800
866
866
866
933
933
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
256
256
256
256
256
256
256
256
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
128MB(R)/4GB
Tower
Tower
Tower
Tower
Tower
Tower
Tower
Tower
1/1
1/1
1/1
1/1
K54AXxx 933 1/2 256 128MB(R)/4GB Tower 1/1
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Intel Pentium III processor with advanced transfer (full speed) L2 cache.
2. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
1/1
1/1
1/1
1/1
-
-
-
H
H
H
-
-
-
-
-
-
-
-
-
-
-
-
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
U160 4/2
U160 4/2
U160 4/2
U160 4/2
U160 4/2
U160 4/2
U160 4/2
U160 4/2
U160 4/2
0/145.6GB
48X-20X 7/5
18.2/145.6GB
48X-20X 7/4
0/145.6GB
0/145.6GB
48X-20X
48X-20X
7/5
7/5
18.2/145.6GB
48X-20X 7/4
0/145.6GB
48X-20X 7/5
0/145.6GB
48X-20X 7/5
18.2/145.6GB
48X-20X 7/4
0/145.6GB
48X-20X 7/5
5/5
5/5
5/5
5/5
5/5
5/5
5/5
5/5
5/5 xSeries 220 Processor Upgrades
Part Number Processor Upgrades with Advanced Transfer Cache SMP Support
1
Processor Speed
Upgrade
2
21P9539
10K3818
800 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
Netfinity 866 MHz with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Upgrade
Processor
All K52xXxx
All K53xXxx
-
All K52xXxx
10K3819
Netfinity 933 MHz with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Upgrade
Processor
All K54xXxx All K52xXxx...K53xXxx
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2.Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine type “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
DIMM Socket
DIMM Socket
DIMM Socket
DIMM Socket
Part Number
33L3142
33L3144
33L3146
33L3152
Memory Description
128MB 133MHz SDRAM ECC RDIMM
Memory
256MB 133MHz SDRAM ECC RDIMM
Memory
512MB 133MHz SDRAM ECC RDIMM
Memory
1 GB 133MHz SDRAM ECC RDIMM xSeries 220 Memory Configurator
Total
System
Memory
1
128 MB
(1 x 128)
256MB
384 MB
512 MB
640 MB
896 MB
1024 MB
1152 MB
1664 MB
128 MB
(33L3142)
1
2 or
3
-
-
-
-
-
Quantity of RDIMMs Added
256 MB
(33L3144)
-
1
-
2 or
3
4
2
512 MB
(33L3146)
-
1
-
-
-
-
2 or
3
1 GB
(33L3152)
-
-
-
-
-
-
1
-
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
20
Updated
17/10/00
21
Updated
17/10/00
2048 MB
2176 MB
3200 MB
-
-
-
4
-
-
2
-
2
3
4096 MB
(max)
4
2
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller DIMMs may provide a more cost-effective alternative to using larger DIMMs. Select the desired total memory from the lefthand column (standard memory is
128MB), then select a quantity in that row from one of the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard memory.
xSeries 220 Internal Hard Disk Drive and External Storage Configurator
Total
Internal
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8204 or
37L7201)
2
18.2 GB
(P/N 00N8205 or
37L7202)
2
36.4 GB
(P/N 00N8206 or
37L7203)
2
10,000 RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8207 or
37L7204)
2
18.2 GB
(P/N 00N8208 or
37L7205)
2
36.4 GB
(P/N 00N8209 or
37L7206)
2
0 GB
9.1GB
18.2GB
27.3GB
36.4GB
1
Standard on Base Models
-
3
4
3
2 1 -
-
2 1
1
2
3
4
3
Standard on Base Models
-
1
-
2
-
-
-
1
45.5GB
54.6GB
72.8GB
-
-
-
-
3 -
4
3
2
-
-
-
-
3
4
3
-
-
2
91GB
109.2GB
-
-
-
-
-
3
4
3
-
-
-
-
-
3
4
3
145.6GB (max) -
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Both hot-swap and non-hot-swap HDDs are listed. Select the appropriate part number for the model of xSeries 220 being configured.
3. A maximum of three hot-swap drives may be installed in hot-swap models. This configuration requires installation of a non-hot-swap HDD in Bay 4.
Part
Number
Description
Non-Hot-Swap Ultra160 Hard Disk
Drives (HDD)
1
00N8204 9.1GB 7200 rpm Ultra160 SCSI HDD
00N8205 18.2GB 7200 rpm Ultra160 SCSI HDD
00N8206 36.4GB 7200 rpm Ultra160 SCSI HDD
00N8207 9.1GB 10,000 rpm Ultra160 SCSI HDD
00N8208 18.2GB 10,000 rpm Ultra160 SCSI HDD
00N8209 36.4GB 10,000 rpm Ultra160 SCSI HDD
Hot-Swap Ultra160 Hard Disk Drives
(HDD)
2
37L7201 9.1GB Ultra160 SCSI Hot-Swap SL HDD
37L7202 18.2GB Ultra160 SCSI Hot-Swap SL HDD
37L7203 36.4GB Ultra160 SCSI Hot-Swap SL HDD
37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
37L7206
36.4GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
External Storage Expansion Units
3
00N6xxx
6
Netfinity EXP200 Storage Expansion Unit
4
37L5857
37L0xxx
7
19K11xx
8
Netfinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant Power
Supply
EXP300 Storage Expansion Unit
5
09N7296 EXP300 Rack-to-Tower Conversion Kit
RPM Height
7200
7200
7200
10,000
10,000
10,000
7200
7200
7200
10,000
10,000
10,000
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
SL
Form Factor
Rack (3U)
-
-
Rack (3U)
-
Hot-Swap Models
Bays
Supported
Maximum
Quantity
4
4
4
4
4
4
5...7
5...7
5...7
5...7
5...7
5...7
1
1
1
1
1
1
3
3
3
3
3
3
Non-Hot-Swap Models
Bays
Supported
Maximum
Quantity
-
-
-
-
-
-
4...7
4...7
4...7
4...7
4...7
4...7
4
4
4
4
4
4
-
-
-
-
-
-
1.Non-hot-swap HDDs are supported in bays 4...7 of non-hot swap models and in bay 4 of hot-swap models.
2.Hot-swap HDDs are supported in bays 5...7 of hot-swap models. Bay 4 supports non-hot-swap HDDs only.
3. Not supported by the onboard SCSI controller. Select an optional SCSI controller then refer to Appendix D: Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply and standard country power cord. Optional hot-swap Netfinity EXP200 350W
Redundant Power Supply (P/N 37L0xxx
7
) includes an additional standard country power cord. To convert an EXP200 to match the system’s tower form factor, Netfinity EXP200 Rackto-Tower Conversion Kit (P/N 37L5857) is required.
5. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500 W redundant power supplies, each with its own standard country power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is required.
6. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish, 902=European/French, 903=European/German, 904=Danish/English,
905=Israel/English, 906=Italian/Italian, 907=South Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication Country Kits are included throughout.
7. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/English, 080=South Africa/English, 081=Swiss/English,
082=UK/English. Line Cords/Publication Kits are included throughout.
8.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/English, 58=Italian/English, 59=South Africa/English, 60=Swiss/
English, 63=UK/English:- Line Cords/ Publication Country Kits are included throughout.
Bay Form
Factor
Height Front
Access
Usage
1
2
3
4
133 mm
(5.25”)
133 mm
(5.25”)
89 mm
(3.5”)
89mm
(3.5”)
HH
HH
SL
SL yes yes yes yes
IDE CD-
ROM open
1
Diskette open
5...7
89mm
(3.5”)
SL
2 yes open
1. This bay does not support hard drive options. It can be used for removable media devices such as tape drives.
2. These bays will be configured as hot-swap bays on model P/Ns
K52AXxx, K53AXxx, K54AXxx.
xSeries 220 Internal SCSI Cabling
Non-Hot-Swap Models xSeries 220 non-hot-swap models are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator on one end of the cable. The other end of the cable is attached to the internal 68-pin connector of the integrated Ultra160 SCSI controller. SCSI devices can be connected to any of the five cable connectors. If 8-bit
(narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.
Hot-Swap Models xSeries 220 hot-swap models are cabled internally with a two-drop, 16-bit wide LVD SCSI cable. One end is connected to the internal 68-pin connector of the integrated Ultra160
SCSI controller. The first drop is designed to support a SCSI device in the 3.5-inch non-hot-swap bay, while the second drop is connected to the hot-swap SCSI backplane.The SCSI backplane provides termination for the SCSI bus.
Other Configuration Alternatives
In the case where a RAID controller is used to support internal drives in a xSeries 220, the standard cable is moved from the onboard controller to the RAID adapter. To connect a tape drive to the onboard or other supported SCSI controller, the two-drop cable from Media Bay Tray and LVD Cable Kit (P/N 10K2340) must be used.
External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
22
Updated
17/10/00
23
Updated
17/10/00
Part
Number
Description
Storage Controllers
2
37L6091 ServeRAID-4L Ultra160 SCSI Controller
3
37L6080 ServeRAID-4M Ultra160 SCSI Controller
4
19K4646 PCI Wide Ultra160 SCSI Adapter
5
02K3454 PCI Fast/Wide Ultra SCSI Adapter
Networking
6
Ethernet
09N9901 10/100 EtherLink Server Adapter by 3Com
34L0301 Netfinity Gigabit Ethernet SX Adapter
19K4401 Netfinity Gigabit Ethernet Adapter
34L4601 Netfinity 10/100 Ethernet Security Adapter
Token Ring
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
34L5001 16/4 Token-Ring PCI Management Adapter
Communications
8
37L14xx Serial I/O SST 8, 16 and 128 Port Adapters
9 xSeries 220 I/O Options
Adapter
Length
Full
Full
Half
Half
Half
Half
Half
Half
Half
Half
PCI
Support
32/64-bit
32/64-bit
32-bit
32-bit
32-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32-bit
Slots
Supported
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
7
1...5
7
1
-
External Connector Access
Half 32-bit 1...5
1. The xSeries 220 has five full-length, 33 MHz PCI expansion slots, three 64-bit and two 32-bit.
2. xSeries 220 has an integrated Ultra160 SCSI Controller with a single internal channel and includes a five drop, multi-mode terminated LVD SCSI cable.
3. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection.
External connector is 0.8-mm VHDCI.
4. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two external 0.8-mm VHDCI Ultra160 connectors.
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilized.
6. The xSeries 220 includes an integrated full-duplex, 10/100 Mbps Ethernet controller.
7. Wake on LAN function supported when installed in slot 1 only.
8. xSeries 220 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A software compatible) and one high-speed parallel port supporting devices using SSP/EPP/ECP protocols adhering to the IEEE 1284 Standard.
9. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416) may be installed.
xSeries 220 Power, Monitors, Accessories
Part Number
94G7448
Description
Power
1,10
Rack Power Cable Type C12 (3.7m)
10
Free Standing Uninterruptible Power Supply (UPS)
2
SUP072Y
SUP102Y
APC Smart-UPS 700
APC Smart-UPS 1000
SUP142Y
14RIxxx
9
30RIxxx
9
37L6862
T3347xx
8
31H2Nxx
8
T32N3xx
8
T274Axx
8
11AG1xx
8
APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 1400RMB
3,10
APC Smart-UPS 3000RMB
3,10
APC Smart-UPS 5000RMB,
4,10
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
6
6
G78 Color Monitor 17” (406.4mm, 16.0” Viewable Image Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable Image Size), stealth black
7
1. The xSeries 220 includes a 330 W voltage sensing power supply and a single standard country power cord..
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 220 includes an integrated SVGA controller(S3 Savage4 Chipset) with 8Mb of video memory
6. Installation within a rack requires optional Monitor Compartment (P/N94G7444).
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II (P/N 37L6888) and Netfinity Rack Keyboard Tray (P/
N 28L4707). A space saver keyboard may coexist within the same 28L4707 keyboard tray.
8. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland,
UK=UK, EU=Europe.
9. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa,
SWS=Switzerland, UKM=United Kingdom, EUR=Europe.
10. The xSeries 220 ships with a standard country power cord. If conversion to Rack format is being carried out, Rack Power Cable P/N 94G7448
(type C12), must be ordered to allow connection to a high voltage UPS or PDU.
Part Number Description
Conversion Kits
09N4300 4Ux20D Tower-to-Rack Kit
6
Rack and NetBAY
1,6
930842P
930842X
9306900
9306910
36L9703
9306200
36L9702
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (Perforated Doors)
Netfinity Rack Extension Kit
Netfinity NetBAY22
NetBAY22 Rack Extension Kit
37L6888
94G7448
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
6
Keyboard and Mouse
2
Space Saver II Keyboard
3, 4
28L36xx
5
1 Rack installation of an xSeries 220 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed here. See IBM Netfinity Rack
Cabinet and Options section for IBM rack supported devices.
2. The xSeries 220 includes both a mouse and non-space saver keyboard.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English,
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
6. The xSeries 220 ships with a standard country power cord. If conversion to Rack format and connection to a high voltage UPS or PDU is being carried out, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
xSeries 220 Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Terminatio n Included
68/50-pin
Converter
Incl.
Ext. Tape
Enclosures
1
09N4041
09N4042
00N7991
12/24GB DDS/3 4-mm Internal SCSI
Tape Drive
2, 3
10/20GB NS Internal SCSI Tape Drive
2, 3
20/40 GB DDS/4 4-mm Internal Tape Drive
3
2
2, 4
2
8
8
16 Ultra2
LVD
89 mm (3.5”) HH or
133 mm (5.25”) HH
89 mm (3.5”) SL or
133 mm (5.25”) HH
89 mm (3.5”) HH or
133 mm (5.25”) HH
Y
Y
Y
Y
Y
N/A
10L7440,
03K8756
10L7440,
03K8756
10L7440,
03K8756
4
10L7440
03K8756
10L7113
External Tape Enclosures
External Half High SCSI Storage Enclosure
5
NetMEDIA Storage Expansion Unit EL
6
NetMEDIA Systems Management Adapter
7
Associated Options
-
-
-
8/16
16
16 LVD
Desktop
Rack
-
N
Y
N
N
N
N
-
-
03K8756
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
Media Bay Tray and LVD Cable Kit
3,4,8
16 LVD/SE External Y N 10L7440
10K2340 16 LVD Internal Y N -
Note: All models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to single- ended performance. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode terminated LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to Appendix D:
Cables - Storage Units - Controllers.
2.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide ultra160 SCSI Adapter (P/N 19K4646) which includes a five-drop multi-mode LVD SCSI cable.
3. For RAID configurations where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and LVD Cable Kit P/N
10K2340 is required, to allow attachment of a SCSI Tape Drive to the standard Ultra160 SCSI controller.
4. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 03K8756) requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop mult-mode terminated cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. NetMEDIA Storage Expansion Unit EL (P/N 03K8756) is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
7. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in an Expansion Unit P/N 03K8756 to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
24
Updated
17/10/00
25
Updated
17/10/00 xSeries 220 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number
K53AXxx
33L3142
37L7202
00N7991
31H2Nxx
SUP072Y
1. For a total of 256 MB of system memory.
2. For a total of 36.4 GB of internal storage.
Description x220 866 Mhz/256KB, 128MB ECC, OPEN-HS, 48X, PCI
128 MB 133Mhz SDRAM ECC RDIMM
1
18.2 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB DDS/4 4-mm Internal Tape Drive
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
1
1
2
1
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this is mind, the xSeries 200 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing,
256 MB of system memory (expandable to 4 GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods are used you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
File and Print Server
Part Number Description
K52AXxx
33L3142
37L7202
00N7991
31H2Nxx
SUP072Y x220 800 Mhz/256KB, 128MB ECC, OPEN-HS, 48X, PCI
128 MB 133Mhz SDRAM ECC RDIMM
1
18.2 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB DDS/4 4-mm Internal Tape Drive
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
1. For a total of 256 MB of system memory.
2. For a total of 54.6 GB of internal storage.
Quantity
1
1
3
1
1
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 220 with 256 MB of memory and 54.6 GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage expansion still available. Demanding network traffic is effectively handled by the standard 100 Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Application Server
Part Number Description
K542Xxx
10K3819
33L3144
37L6091
00N8205
10K2340 x220 933 MHz/256KB, 128MB ECC, 18.2GB, 48X, PCI
Netfinity 933 MHz with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium
III Upgrade Processor
256 MB 133 MHz SDRAM ECC RDIMM
1
ServeRAID-4L Ultra160 SCSI Controller
18.2GB 7200 rpm Ultra160 SCSI HDD
Media Bay Tray and LVD Cable Kit
3
2
00N7991
31H2Nxx
20/40 GB DDS/4 4-mm Internal Tape Drive NS Internal SCSI Tape Drive
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
SUP072Y APC Smart-UPS 700
1. For a total of 384 MB of system memory.
2. For a total of 54.6 GB of internal storage.
3. Contains a cable for dedicated attachment of tape to standard controller.
Quantity
1
1
1
1
1
2
1
1
1
An application server differs from a file and print server in that it has a higher workload, in providing application serving requirements for users. With this in mind, the xSeries 220 was selected to provide an affordable price point for an application server, with two-way Pentium III processing, 384 MB of system memory (expandable to 4 GB), and availability features such as RAID protected internal storage and power protection with an APC Smart-UPS.
IBM xSeries 230 and Netfinity 5100
xSeries 230 / Netfinity 5100 At-A-Glance Chart
xSeries 230
K861Yxx
K86RYxx
1
-
-
1 GHz 1/2 256
1 GHz 1/2 256
128MB
(R)/4GB
128MB
(R)/4GB
Tower 1/3
P-Optional,
H
Rack(5U) 1/3
P-Optional,
H
O-Power
O-Power
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
0/218.4
GB
0/218.4
GB
40X-17X 10/8 5/5
40X-17X 10/8 5/5
Netfinity 5100
811YExx
81RYExx
1
821YExx
82RYExx
1
831YExx
83RYExx
1
841YExx
84RYExx
1
851YExx
85RYExx
1
24/10/00 667 1/2 256
24/10/00 667 1/2 256
-
-
-
-
-
-
-
-
733 1/2 256
733 1/2 256
800 1/2 256
800 1/2 256
866 1/2 256
866 1/2 256
933 1/2 256
933 1/2 256
128MB
(R)/4GB
128MB
(R)/4GB
Tower
128MB
(R)/4GB
Rack (5U) 1/3
P-Optional,
H
Tower
1/3
P-Optional,
H
1/3
P-Optional,
H
128MB
(R)/4GB
Rack (5U) 1/3
P-Optional,
H
128MB
(R)/4GB
Tower 1/3
P-Optional,
H
128MB
(R)/4GB
Rack (5U) 1/3
P-Optional,
H
128MB
(R)/4GB
Tower 1/3
P-Optional,
H
128MB
(R)/4GB
Rack (5U) 1/3
P-Optional,
H
128MB
(R)/4GB
Tower 1/3
P-Optional,
H
128MB
(R)/4GB
Rack (5U) 1/3
P-Optional,
H
O-Power
O-Power
O-Power
O-Power
O-Power
O-Power
O-Power
O-Power
O-Power
O-Power
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
Y 10/100 D,U160 4/2
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
0/218.4
GB
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
40X-17X 10/8 5/5
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See Power, Monitors, Accessories section for supported IBM racks.
2. High-speed, 133 MHz SDRAM.
3. Up to two additional 250 W Hot-Swap Redundant Power Supplies P/N 33L37xx and a single Hot-Swap Power Supply Expansion Kit P/N 37L6881 are required for power supply redundancy.
See Power, Monitors, Accessories section for additional information.
4. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
5. Intel Pentium III processor with advanced transfer (full-speed) L2 cache and 133 MHz Front-Side Bus.
6. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 230 / Netfinity 5100 Processor Upgrades
Part Number Processor Upgrades with 256 KB Cache
(Full Speed)
SMP Support
1
Processor Speed Upgrade
2
00N7949
00N7943
10K2338
19K4630
19K4631
19K4640
3
Netfinity 667 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 733 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 800 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 866 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 933 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
1 GHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache
Pentium III Processor
1xY
2xY
3xY
4xY
5xY
3
6xY
-
1xY
All 1...2xY
All 1...3xY
-
5xY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
3. Netfinity 933 MHz Upgrade Processor P/N 19K4631 is only supported on models P/N 85xYExx due to thermal restrictions.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
26
Updated
17/10/00
27
Updated
17/10/00
R DIMM Socket 4
R DIMM Socket 3
R DIMM Socket 2 xSeries 230 / Netfinity 5100 Memory Configurator
Total Memory
1
128 MB
(1 x 128)
Models
256 MB
384 MB
128 MB
(33L3123)
1
2 or
R DIMM Socket 1
Std. (R)DIMM
The recommended order of installation:
Slot 1-2-3-4
Part Number Memory Description
1
33L3123 128 MB 133 MHz SDRAM ECC RDIMM II
33L3125
33L3127
256 MB 133 MHz SDRAM ECC RDIMM II
512 MB 133 MHz SDRAM ECC RDIMM II
1 GB 133 MHz SDRAM ECC RDIMM II 33L3129
1. The recommended order of installation is in sequence from Socket 1 to Socket 4.
Memory size is not a factor.
512 MB 3
Quantity of RDIMMs Added
256 MB
(33L3125)
-
1
-
512 MB
(33L3127)
-
-
-
1 GB
(33L3129)
-
-
-
640 MB
896 MB
1024 MB
1152 MB
1664 MB
-
-
-
-
-
2 or
3
4
2
-
-
1
-
-
2 or
3
4
2
-
-
-
1
-
2048 MB -
2176MB
3200 MB
4096 MB (max)
-
-
-
-
-
-
-
-
-
2
3
4
2
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard memory.
xSeries 230 / Netfinity 5100 Internal Hard Disk Drive and External Storage Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs) 10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
18.2 GB
(P/N 37L7202)
36.4 GB
(P/N 37L7203)
9.1 GB
(P/N 37L7204)
18.2 GB
(P/N 37L7205)
36.4 GB
(P/N 37L7206)
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
4
5
6
1
2
3
Standard on Base Models
-
1
-
2
-
3
1
-
-
-
-
-
4
5
6
1
2
3
Standard on Base Models
-
1
-
2
-
3
72.8 GB
91 GB
109.2 GB
-
-
-
4
5
6
2
-
3
-
-
-
4
5
6
2
-
3
145.6 GB
182 GB
-
-
-
-
4
5
-
-
-
-
4
5
218.4 GB
(max.)
6 6
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
1
-
-
-
-
-
Bay
A
B
-
-
Form
Factor
133 mm
(5.25”)
133 mm
(5.25”)
133 mm
(5.25”)
89 mm
(3.5”)
Height
HH
1
HH
1
SL
SL
Front
Access
Yes
Yes
Yes
Yes
Usage
Open
Open
IDE CD-
ROM
Diskette
Part
Number
Description RPM Height
Hot-Swap Ultra160 Hard Disk Drives (HDD)
Bays
Supported
37L7201
37L7202
37L7203
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
7200
7200
7200
SL
SL
SL
C...H
C...H
C...H
Max.
Qty.
6
6
6
C...H
HS
Tower Model View
Removable Media (RM)
A
B
CD-ROM
Hot-Swap
(HS)
C
D
E
F
G
H
SL
2
1. Two half-high (HH) bays can be combined to support a single full-high (FH) device. Installation of devices in Bays A or B may require Netfinity Hot-Swap
Power Supply Expansion Kit (P/N 37L6881) and at least one Netfinity 250 W Hot-
Swap Redundant Power Supply (P/N 33L37xx). Installation of HDDs in Bays A and B also requires Media Bay Tray and LVD Cable Kit (P/N 10K2340).
2. Two slim-line (SL) bays (C/D, E/F, G/H) can be combined to support a single half-high (HH) device.
For clarity purposes, bay labels in these diagrams are for reference by the accompanying tables and are not the actual labels. Refer to the documentation shipped with the system for further details on actual labels.
Rack Model View
Hot-Swap (HS)
G F E D
Removable Media (RM)
C
Yes
A
B
CD-ROM
Diskette
Open 37L7204
37L7205
37L7206
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000
10,000
10,000
SL
SL
SL
C...H
C...H
C...H
19K0655
19K0656
9.1 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
15,000
15,000
SL
SL
C...H
C...H
Non-Hot-Swap Internal Hard Disk Drives (HDDs)
20L0553 9.1 GB Wide Ultra2 SCSI HDD
1
20L0554 18.2 GB Wide Ultra2 SCSI HDD
1
7200
7200
SL
SL
A, B
1
A, B
1
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2
-
33L37xx
9
250 W Hot-Swap Redundant Power
Supply
-
-
-
A/B
-
6
6
6
6
6
2
2
1
-
37L6881
Hot-Swap Power Supply Upgrade
Kit
3
External Storage Expansion Units
4
-
Form
Factor
00N6xxx
10
37L5857
37L0xxx
19K11xx
11
12
09N7296
Netfinity EXP200 Storage Expansion
Unit
5, 8
Rack (3U)
Netfinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant
Power Supply
8
EXP300 Storage Expansion Unit
6, 8
EXP300 Rack-to-Tower Conversion
Kit
-
-
Rack (3U)
-
00N71xx
13
FAStT EXP500 Storage Expansion
Unit
7, 8
94G7448 Rack Power Cable Type C12 (3.7m)
8
Rack (3U)
-
1. Additional power may be required when installing a SCSI device in bay A or B. Configurations exceeding four SL hotswap hard disk drives and two PCI adapters require both Hot-Swap Power Supply Upgrade Kit P/N 37L6881 and at least one optional 250 W Hot-Swap Redundant Power Supply P/N 33L37xx. Example: 3 SL HS HDD’s plus 5 adapters - no additional power supply required. An optional SCSI cable is required. A two-drop terminated LVD SCSI cable is included with both Media Bay Tray and LVD Cable Kit P/N 10K2340 and Hot-Swap Power Supply Upgrade Kit P/N 37L6881.
2. Media Bay Tray and LVD Cable Kit P/N 10K2340 contains a two-drop terminated LVD SCSI cable and the hardware required to convert two half-high 5.25” removable media bays into two non-hot-swap 7200 RPM HDD bays.
3. Hot-Swap Power Supply Upgrade Kit P/N 37L6881 contains a hot-swap power backplane that supports installation for up to three hot-swap power supplies.
4. Select an optional SCSI controller then refer to Appendix D: Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
5. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and single hot-swap 350W power supply. Optional hot-swap
Netfinity EXP200 350W Redundant Power Supply (P/N 37L0075) provides redundancy.
6. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies.
7. FAStT EXP500 Storage Expansion Unit (P/N 00N71xx) includes dual hot-swap 350W power supplies.
8. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
9. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South
Africa, 66=Switzerland, 67=United Kingdom&Arabia.
10. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
11. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
12.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
13. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
xSeries 230 / Netfinity 5100 Internal SCSI Cabling
The xSeries 230 and Netfinity 5100 contain a DASD backplane supporting six hot-swap, SCA-2 compliant drive bays. The backplane is connected to channel A of the integrated dual-channel, Ultra160 SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID adapter rather than the integrated SCSI controller. No external SCSI port is included.
A two-drop, 16-bit LVD SCSI cable with integrated terminator is also included with the Netfinity Hot-Swap Power Supply Expansion Kit P/N 37L6881.This cable is included in the expansion kit because installation of SCSI devices in bays A and B requires additional power. The two-drop cable supports up to two internal devices in these bays. This cable can be attached to channel B of the integrated dual-channel Ultra160 SCSI controller or to a supported SCSI adapter.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
28
Updated
17/10/00
29
Updated
17/10/00 xSeries 230 / Netfinity 5100 I/O Options
Part
Number
Description
19K0564
37L6086
37L6091
37L6080
37L6889
19K4646
02K3454
00N6881
19K11xx
20
19K11xx
21
19K1121
34L1501
34L0301
34L0701
Storage Controllers
1
Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
2
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
3
ServeRAID-4L Ultra160 SCSI Controller
4
ServeRAID-4M Ultra160 SCSI Controller
5
ServeRAID-4H Ultra160 SCSI Controller
6
PCI Wide Ultra160 SCSI Adapter
15
PCI Wide Ultra SCSI Adapter
Fibre Storage Controller and Options
7
Netfinity FAStT Host Adapter
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT200 Redundant RAID Controller
Networking
8
Ethernet
Netfinity 10/100 Ethernet PCI Adapter 2
Netfinity Gigabit Ethernet SX Adapter
Token Ring
Token-Ring 16/4 PCIAdapter 2 with Wake on LAN
16
Communications
9
Adapter
Length
Full
Full
Full
Full
Full
Half
Half
Half
-
-
-
Half
Half
Half
PCI Support
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
-
-
-
32-bit
32/64-bit
32-bit
Slots
Supported
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
-
-
-
1...5
1...5
1...5
Exterior Connector Access
36L96xx
19
03K9309
36L9654
Systems Management
10
Netfinity Advanced System Management PCI Adapter
11
Netfinity Advanced System Management Interconnect Cable
Kit
13
Netfinity Advanced System Management Token-Ring
Connection
14
Full
-
-
32-bit
-
-
1...5
12
-
-
10L7368
Host Attach
Netfinity ESCON Adapter
17
Full 32-bit 1...5
18
1. xSeries 230 / Netfinity 5100 includes a dual-port, dual-channel Ultra160 SCSI controller for internal use only. No standard external port is available. See “Internal SCSI Cabling” for cabling alternatives.
2. Netfinity ServeRAID-3L Ultra2 SCSI Adapter II P/N 19K0564 provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
3. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter (P/N 37L6086) provides one internal and two external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8-mm VHDCI) providing a total of three external LVDS SCSI channels. Includes 32 MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection. External connector is 0.8-mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external
Uoltra160 connectors (only two connectors may be utilised). External connectors are 0.8-mm VHDCI .
6. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilised). External connectors are 0.8-mm VHDCI.
7. See Fibre Array Solutions section for additional configuration information.
8. xSeries 230 / Netfinity 5100 includes a full-duplex, 10/100 Mbps Ethernet PCI controller.
9. xSeries 230 / Netfinity 5100 includes two USB ports, two serial and one parallel port.
10. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 230 / Netfinity 4500R works with Netfinity Director to provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) and Netfinity Advanced System Management Interconnect Cable Kit (P/N
03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
11. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter, which requires a separate power source. Provides an integrated
10/100 Ethernet port and a PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
12. A maximum quantity of one is supported.
13. Required for all xSeries / Netfinity Servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1xX...4xX are not supported). Optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) includes the contents of this option.Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more
than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
14 Contains an IBM Turbo 16/4 Token-Ring PCI card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter (P/N 36L96xx), and a PC Card to 9-pin
D-Shell cable which is routed to an available adapter slot opening (reduces available slots by one). The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and
Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together.
15. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm VHDCI connector. Only one of the two connectors may be utilised.
16. The Wake on LAN function of this option is not supported by this server.
17. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
18. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single server.
19. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
20.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English
31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
21.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English,
45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
xSeries 230 / Netfinity 5100 Power, Monitors, Accessories
Part Number
33L37xx
11
37L6881
94G7448
Description
Power
1,10
250 W Hot-Swap Redundant Power Supply
2, 10
Hot-Swap Power Supply Expansion Kit
3
Rack Power Cable Type C12 (3.7m)
10
Free Standing Uninterruptible Power Supply (UPS)
4
SUP102Y
SUP142Y
14RIxxx
13
30RIxxx
13
37L6862
T3347xx
12
31H2Nxx
12
T32N3xx
12
T274Axx
12
11AG1xx
12
APC Smart-UPS 1000
APC Smart-UPS 1400
APC Smart-UPS 1400RMB
5
APC Smart-UPS 3000RMB
5
APC Smart-UPS 5000RMB
6
Rack Mount Uninterruptible Power Supply (UPS)
4
Monitors
7
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
8
8
8
8
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
9
1. xSeries 230 / Netfinity 5100 include a single 250 W, hot-swap power supply and a single standard country power cord. Power supply redundancy may be achieved with the addition of optional
250 W Hot-Swap Redundant Supply P/N 33L37xx. Hot-Swap Power Supply Upgrade Kit P/N 37L6881 is required when optional power supplies are to be added. Redundancy for configurations of greater than 250 W requires installation of a second optional supply. Whenever devices are installed in bays A or B, both the expansion kit and a second power supply are required. Generally, configurations containing greater than six PCI adapters and HDDs, in any combination, will require the second power supply. To assist in determining when an additional power supply is required to preserve redundancy, a “Non-Redundant LED” is a standard feature.
2. 250 W Hot-Swap Redundant Power Supply P/N 33L37xx includes a single standard country power cord for connection to a low voltage wall outlet. Hot-Swap Power Supply Expansion Kit P/N
37L6881 must be installed prior to adding optional power supplies.
3. Hot-Swap Power Supply Expansion Kit P/N 37L6881 includes a hot-swap power backplane, terminated two-drop LVD SCSI cable, and mounting brackets for DLT tape drives. Required when installing a second power supply or devices in the 133-mm (5.25”) HH bays.
4. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
5. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
6. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
7. Netfinity 5100 uses an SVGA controller (S3 Savage4 chipset) with 8 MB of video memory.
8. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
9. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
10. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection of a Rack model to a high voltage UPS or PDU.
11. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
12. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
13. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom,
EUR=Europe.
Part Number
37L6858
930842P
930842X
9306900
9306910
9306200
37L6888
94G7448
28L36xx
6
28L36xx
7
28L3675
Description
Conversion Kits
5Ux24D Tower-to-Rack Kit
Rack and NetBAY
1,8
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated front door)
Netfinity NetBAY22
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
2
Space Saver II Keyboard
3, 5
Preferred Keyboard (stealth black)
4
Sleek 2-Button Stealth Black Mouse
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
30
Updated
17/10/00
31
Updated
17/10/00
1. xSeries 230 / Netfinity 5100 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported devices.
2. Tower models include both a keyboard and mouse. Rack models include neither.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
6 . Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/
Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where ‘ xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The xSeries 230 / Netfinity 5100 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
xSeries 230 / Netfinity 5100 Tape Options
Part
Number
Tape Drives
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
1
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
1
09N4040 20/40 GB DLT Internal SCSI Tape Drive
1
00N7990 40/80 GB DLT Internal SCSI Tape Drive
1
Bays
Supported
A, B
A, B
A/B
A/B
SCSI
Interface
(bit)
Form
Factor
16 Ultra2 LVD
16
8
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
133 mm
(5.25”) HH
133 mm
(5.25”) FH
133 mm
(5.25”) FH
133 mm
(5.25”) HH
Termination
Included
Y
N
N
N
N
68/50-pin
Converter Incl.
N/A
N/A
Y
N/A
Ext. Tape
Enclosures
10L7440,
03K8756
2
10L7440
3
,
03K8756
03K8705
3
,
03K8756
03K8705
03K8756
3
2
,
10L7440
03K8756
3
2
,
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
1
00N79xx
11
Tape Autoloaders
DLT Tape Autoloader
00N7992 120/240GB DDS/4 Tape Autoloader
1
A, B
N/A
A/B
16
16 Ultra2 LVD
Desktop
133 mm
(5.25”) FH
Y
N
N/A
-
N
-
03K8756
2
External Tape Libraries
4
00N79xx
12
DLT Tape Library 16
Desktop orRack
Y -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
5
03K8705 DLT External SCSI Enclosure
6
03K8756 NetMEDIA Storage Expansion Unit EL
7
10L7113 NetMEDIA Systems Management Adapter
8
Associated Options
-
-
-
8/16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
-
-
-
03K8756
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
10K2340 Media BayTray and LVD Cable Kit
1,2,9
-
-
16 LVD/SE
16 LVD
Ext.
Int.
Y
Y
N
N
10L7440,
03K8705
-
37L6881
33L37xx
13
Netfinity Hot-Swap Power Supply Expansion
Kit
10
250 W Hot-Swap Redundant Power Supply
-
-
16 LVD
-
Int.
-
Y
-
N
-
-
-
Note: Additional power may be required when installing a SCSI device in bay A or B. Configurations exceeding four SL hot-swap hard disk drives and two PCI adapters require both Hot-Swap Power Supply
Expansion Kit P/N 37L6881 and at least one optional 250 W Hot-Swap Redundant Power Supply P/N 33L37xx. Example: 3 SL HS HDD’s plus 5 adapters - no additional power supply required. An optional
SCSI cable is required for attachment of media bay devices to Ultra160 controller B. No external SCSI port is available. External tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N
19K4646 which has an external 0.8-mm VHDCI connector.
1. Requires two-drop multi-mode terminated LVD SCSI cable included with either Media Bay Tray and LVD Cable Kit P/N 10K2340 or Hot-Swap Power Supply Expansion Kit P/N 37L6881.
2. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit P/N 10K2340.
3. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
6. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator P/
N 00N7956.
7. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
8. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
9. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
10. Hot-Swap Power Supply Expansion Kit P/N 37L6881 includes a hot-swap power backplane, and two-drop multi-mode terminated LVD SCSI cable. Required when installing a second power supply.
11. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
12. Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
13. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
xSeries 230 / Netfinity 5100 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number Description
851YExx
33L3123
37L6091
37L7201
01K1325
31H2Nxx
SUP102Y
37L6881
Netfinity 5100 933 MHz/256 KB, 128 MB ECC, OPEN, 40X, PCI
128 MB 133 MHz SDRAM ECC RDIMM II
ServeRAID-4L Ultra160 SCSI Controller
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
20/40 GB 8-mm Internal SCSI Tape Drive
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 1000
Hot-Swap Power Supply Expansion Kit
2
33L37xx 250 W Hot-Swap Redundant Power Supply
1. For a total of 256 MB of system memory.
2. For a total of 36.4 GB of RAID protected hot-swap, hot-spare internal storage.
1
Quantity
1
1
1
1
1
4
1
1
1
An internet server is a server that handles all requests from the Internet (intranet or extranet). Usually this type of server has the same characteristics as a file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (Firewall). In the case of an internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this in mind the xSeries 230 was selected to provide an affordable price point for the growing internet server market, 256 MB of system memory (expandable to 4 GB, and availability features such as RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the internet. Usually fast Ethernet routers are used, but if other methods are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
File and Print Server
Part Number
K861Yxx
33L3123
37L6091
37L7201
01K1325
31H2Nxx
SUP102Y
37L6881
33L37xx
APC Smart-UPS 1000
Hot-Swap Power Supply Expansion Kit
250 W Hot-Swap Redundant Power Supply
1. For a total of 256 MB of system memory.
2. For a total of 45.5 GB of RAID protected hot-swap, hot-spare internal storage.
Description xSeries 230 1 GHz/256 KB, 128 MB ECC, OPEN, 40X, PCI
128 MB 133 MHz SDRAM ECC RDIMM II
1
ServeRAID-4L Ultra160 SCSI Controller
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB 8-mm Internal SCSI Tape Drive
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
Quantity
1
1
1
1
5
1
1
1
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing environment, but doesn’t require the high end performance and fault tolerance properties of larger servers.
The sample configuration above consists of an xSeries 230 with 256 MB of memory (expandable to 4 GB) and 45.5 GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage expansion still available. Demanding network traffic is effectively handled by the standard 100 Mbps Ethernet connection.
The configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Rack Mounted Application Server
Part Number Description
85RYExx
19K4631
33L3125
37L6080
37L7201
01K1325
31H2Nxx
14RIxxx
33L37xx
37L6881
Netfinity 5100 933 MHz/256 KB, 128 MB ECC, OPEN, 40X, PCI (Rack 5U)
933 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
256 MB 133 MHz SDRAM ECC RDIMM II
1
ServeRAID-4M Ultra160 SCSI Controller
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB 8-mm Internal SCSI Tape Drive
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
9306200
250 W Hot-Swap Redundant Power Supply
Hot-Swap Power Supply Expansion Kit
Industry Standard 19” Rack, EIA-310D, min. depth of 28” (711 mm)
Netfinity NetBAY22
28L36xx
28L3645
Space Saver II Keyboard
Blank Filler Kit
1. For a total of 384 MB of system memory.
2. For a total of 36.4 GB of usable RAID 5 storage (45.5 GB total disk).
Quantity
1
1
1
5
1
1
1
1
1
1
1
1
2
An application server differs from a file and print server in that it has a higher workload, in providing application serving requirements for users. With this in mind, the xSeries 230 was selected to provide an affordable price point for an application server, with two-way Pentium III processing, 384 MB of system memory (expandable to 4 GB), and availability features such as battery-backed cache, RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
32
Updated
17/10/00
33
Updated
17/10/00
IBM xSeries 240 and Netfinity 5600
xSeries 240 / Netfinity 5600 At-A-Glance Chart
xSeries 240
K481Yxx
K48RYxx
1
-
-
1 GHz 1/2 256
1 GHz 1/2 256
256MB
(R)/4GB
256MB
(R)/4GB
Tower 2/3
Rack(5U) 2/3
P,
S,H,F
P,
S,H,F
S-Power
4
S-Fans
S-Power
4
S-Fans
Y 10/100
Y 10/100
D,U2
D,U2
4/2 0/218.4 GB 40X- 17X 10/8 5/5
4/2 0/218.4 GB 40X- 17X 10/8 5/5
Netfinity 5600
441YExx
44RYExx
451YExx
45RYExx
461YExx
46RYExx
471YExx
47RYExx
1
1
1
1
24/10/00
24/10/00
-
-
-
-
-
-
733
733
800
800
866
866
933
933
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
256
256
256
256
256
256
256
256
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
256MB
(R)/4GB
Tower
Rack
(5U)
Tower
Rack
(5U)
Tower
Rack
(5U)
Tower
Rack
(5U)
2/3
2/3
2/3
2/3
2/3
2/3
2/3
2/3
P,
S,H,F
P,
S,H,F
P,
S,H,F
P,
S,H,F
P,
S,H,F
P,
S,H,F
P,
S,H,F
P,
S,H,F
S-Power
4
S-Fans
S-Power
4
S-Fans
S-Power
4
S-Fans
S-Power
4
S-Fans
S-Power
4
S-Fans
S-Power
4
S-Fans
S-Power
S-Fans
S-Power
S-Fans
4
4
Y
Y
Y
Y
Y
Y
Y
Y
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
D,U2
D,U2
D,U2
D,U2
D,U2
D,U2
D,U2
D,U2
4/2
4/2
4/2
4/2
4/2
4/2
4/2
4/2
0/218.4 GB
0/218.4 GB
0/218.4 GB
0/218.4 GB
0/218.4 GB
0/218.4 GB
0/218.4 GB
0/218.4 GB
40X- 17X
40X- 17X
40X- 17X
40X- 17X
40X- 17X
40X- 17X
40X- 17X
40X- 17X
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133 Mhz Front-Side Bus.
3. High-speed, 133 MHz SDRAM.
4. Robust configurations may require optional 250W Hot-Swap Redundant Power Supply P/N 33L37xx for redundancy. See Power, Monitor, Accessories section for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. Not available from IBM after this date. Business Partner inventory may be available.
10/8
10/8
10/8
10/8
10/8
10/8
10/8
10/8
5/5
5/5
5/5
5/5
5/5
5/5
5/5
5/5 xSeries 240 / Netfinity 5600 Processor Upgrades
Part Number Processor Upgrades with 256 KB Cache
(Full Speed)
SMP Support
1
Processor Speed Upgrade
2
00N7943
10K2338
19K4630
19K4631
Netfinity 733 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 800 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 866 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 933 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
4xY
5xY
6xY
7xY
All 1...3xY
All 1...4xY
All 1...5xY
All 1...6xY
19K4640
1 GHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache
Pentium III Processor
8xY -
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
To access information on the World Wide Web, use address: http://www.pc.ibm.com
34
Updated
17/10/00
35
Updated
17/10/00 xSeries 240 / Netfinity 5600 Memory Configurator
Install largest RDIMM in socket 4 (J1) with subsequent RDIMMs in the following order: J4,
J3, J2.
Standard Memory
256MB Models
Total Memory
1
256 MB
384 MB
512 MB
640 MB
896 MB
1024 MB
1152 MB
1664 MB
2048 MB
2304MB
3200 MB
3328 MB
4096 MB (max)
-
-
1
-
-
-
128MB
-
-
1
-
1
-
1
-
-
1
1
-
-
256MB
1
1
1
-
-
1
1
-
-
-
1
-
-
512MB
1
1
1
-
-
-
-
2
-
1
1
3
4
2
1GB
-
-
-
-
-
-
-
Memory RDIMMs to be added
This table does not represent all possible memory configurations.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard memory.
Part Number Memory Description
1
33L3058
33L3060
33L3062
128 MB, 133 MHz SDRAM ECC RDIMM
256 MB, 133 MHz SDRAM ECC RDIMM
512 MB, 133 MHz SDRAM ECC RDIMM
33L3064 1 GB, 133 MHz SDRAM ECC RDIMM
1. Install largest RDIMM in socket 4 (J1) with subsequent RDIMMs in the following order: J4, J3, J2.
xSeries 240 / Netfinity 5600 Internal Hard Disk Drive and External Storage Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
2
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
1
2
3
4
5
Standard on Base Models
-
1
-
2
-
-
-
-
1
-
1
2
3
4
5
Standard on Base Models
-
1
-
2
-
54.6 GB
72.8 GB
91 GB
109.2 GB
145.6 GB
182 GB
218.4 GB
(max.)
6
-
-
-
-
-
-
3
4
5
6
-
-
-
4
5
6
-
2
-
3
3
3
3
6
-
-
-
-
-
-
3
4
5
6
-
-
-
-
2
-
3
4
3
5
3
6
3
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2.Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
-
-
-
1
-
2
Bay
A
B
-
-
C...H
Form
Factor
133 mm
(5.25”)
133 mm
(5.25”)
133 mm
(5.25”)
89 mm
(3.5”)
HS
Height
HH
1
HH
1
HH
SL
SL
2
Front
Access
Yes
Yes
Yes
Yes
Yes
Usage
Open
Open
IDE CD-
ROM
Diskette
Open
Part
Number
37L7201 9.1 GB Ultra160 SCSI Hot-Swap SL HDD
37L7202
37L7203
37L7204
Description
Ultra160 Hard Disk Drives (HDD)
1
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap
SL HDD
RPM Height
7200
7200
7200
10,000
SL
SL
SL
SL
Bays
Supported
C...H
C...H
C...H
C...H
Max.
Qty.
6
6
6
6
1. Two half-high (HH) bays can be combined to support a single full-high
(FH) device
2. Two slim-line (SL) bays can be combined to support a single half-high
(HH) device.
Tower Model View
Removable Media (RM)
A
B
CD-ROM
Hot-Swap
(HS)
C
D
E
F
G
H
37L7205
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap
SL HDD
10,000 SL C...H
6
37L7206
19K0655
19K0656
36.4 GB 10K-4 Ultra160 SCSI Hot-Swap
SL HDD
9.1 GB 15K-rpm Ultra160 SCSI Hot-Swap
HDD
18.2 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
10,000
15000
15000
SL
SL
SL
Non-Hot-Swap Internal Hard Disk Drives (HDD)
20L0553 9.1 GB Wide Ultra2 SCSI HDD
2
20L0554 18.2 GB Wide Ultra2 SCSI HDD
2
7200
7200
SL
SL
Associated Options
C...H
C...H
C...H
A, B
2
A, B
2
6
6
6
2
2
10K2340 Media Bay Tray and LVD Cable Kit
External Storage Expansion Units
3
00N6xxx
8
37L5857
Netfinity EXP200 Storage Expansion
Unit
4, 7
Netfinity EXP200 Rack-to-Tower
Conversion Kit
-
Form Factor
Rack (3U)
Tower
A/B 1
For clarity purposes, bay labels in these diagrams are for reference by the accompanying tables and are not the actual labels. Refer to the documentation shipped with the system for further details on actual labels.
Rack Model View
H G F E D
Removable Media (RM)
C
A
B
CD-ROM
Diskette
37L0xxx
9
19K11xx
10
Netfinity EXP200 350 W Redundant
Power Supply
7
EXP300 Storage Expansion Unit
5, 7
09N7296 EXP300 Rack-to-Tower Conversion Kit
00N71xx
11
FAStT EXP500 Storage Expansion Unit
6, 7
94G7448 Rack Power Cable Type C12 (3.7m)
7
-
Rack (3U)
-
Rack (3U)
-
1. Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Requires Media Bay Tray and LVD Cable Kit P/N 10K2340. Media Bay Tray and LVD Cable Kit converts two half-high
5.25” removable media bays into two non-hot-swap HDD bays.
3. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to see Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply. Optional hot-swap
Netfinity EXP 350 W Redundant Power Supply P/N 37L0xxx provides redundancy. To convert and EXP200 to a tower form factor, Netfinity EXP200 Rack-to-Tower Conversion Kit P/N 37L5857 is required.
5. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500 W redundant power supplies. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit P/N 09N7296 is required.
6. FAStT EXP500 Storage Expansion Unit P/N 00N71xx includes dual hot-swap 350 W power supplies.
7. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
8. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South Africa/
English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication Country Kits are included throughout.
9. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
10.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/English,
58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication Country Kits are included throughout.
11. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/Language
Line Cords/Publications are included as indicated.
xSeries 240 / Netfinity 5600 Internal SCSI Cabling
The xSeries 240 and Netfinity 5600 contain a backplane supporting six hot-swap drive bays. The backplane is connected to the integrated dual channel, wide Ultra2 SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID adapter rather than the integrated SCSI controller. A two-drop, 16-bit SCSI cable with integrated terminator is also included with the server to support up to two internal removable media devices. This cable can be attached to the integrated SCSI controller if a RAID adapter is used to support the internal hot-swap drive bays. It can also be used to attach to a supported SCSI adapter if the integrated Ultra2 SCSI controller is utilised for the hot-swap bays. The second channel is available through an industry-standard 0.8-mm very high density connector interface
(VHDCI) located on the rear panel for external use.
To access information on the World Wide Web, use address: http://www.pc.ibm.com
36
Updated
17/10/00
37
Updated
17/10/00 xSeries 240 / Netfinity 5600 I/O Options
Part
Number
Description
Storage Controllers
1
01K7364 Netfinity ServeRAID-3L Ultra2 SCSI Adapter
3
37L6086 Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
4
37L6091 ServeRAID-4L Ultra160 SCSI Controller
5
37L6080 ServeRAID-4M Ultra160 SCSI Controller
6
37L6889 ServeRAID-4H Ultra160 SCSI Controller
7
19K4646 PCI Wide Ultra160 SCSI Adapter
8
02K3454 PCI Fast/Wide Ultra SCSI Adapter
Fibre Storage Controller and Options
9
00N6881 Netfinity FAStT Host Adapter
19K11xx
22
FAStT200 Storage Server
19K11xx
23
FAStT200 HA Storage Server
19K1121 FAStT200 Redundant RAID Controller
Networking
10
Ethernet
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
09N9901 10/100 EtherLink Server Adapter by 3Com
34L0301 Netfinity Gigabit Ethernet SX Adapter
Adapter
Length
Full
Full
Full
Full
Full
Half
Half
Half
-
-
-
PCI Support
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
-
-
-
Slots
Supported
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
-
-
-
Hot-
Plug
X
X
X
-
-
X
X
X
-
-
-
2
Rack Model
Half
Half
Half
32-bit
32-bit
32/64-bit
1...5
1...5
1...5
X
X
X
Token Ring
34L5001 16/4 Token-Ring PCI Management Adapter
20
34L5201 High-Speed 100/16/4 Token-Ring PCI Management Adapter
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
20
Communications
11
37L14xx Serial I/O SST 8, 16 and 128 Port Adapters
12
Systems Management
13
36L96xx
21
Netfinity Advanced System Management PCI Adapter
14
03K9309 Netfinity Advanced System Management Interconnect Cable Kit
16
36L9654 Netfinity Advanced System Management Token-RIng Connection
17
Half
Half
Half
Full
-
-
32-bit
32-bit
32-bit
Half 32-bit
32-bit
-
-
1...5
1...5
1...5
1...5
12
1...5
15
-
-
-
-
-
X
X
X
-
Host Attach
10L7368 Netfinity ESCON Adapter
18
Full 32-bit 1...5
19
-
1. xSeries 240 / Netfinity 5600 has two integrated Wide Ultra2 SCSI channels. One is internal and the other is external with a 0.8-mm Very High Density Connection Interface (VHDCI).
2. Three of the five PCI slots are 32/64-bit hot-plug capable using IBM’s Active PCI technology. For Network Operating System support access URL www.ibm.com/pc/us/compat.
3. Netfinity ServeRAID-3L Ultra2 SCSI Adapter P/N 01K7364 provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
4. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter (P/N 37L6086) provides one internal and 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8mm VHDCI connector) providing a total of 3 external LVDS SCSI channels. Includes 32MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
5.ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection.
External connectors are 0.8-mm VHDCI..
6. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8-mm VHDCI.
7.ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external Ultra160 connectors
(only four connectors may be utilised). External connectors are 0.8-mm VHDCI.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilised.
9. See Fibre Array Solutions section for additional configuration information.
10. xSeries 240 / Netfinity 5600 has an integrated 10/100 PCI Ethernet Controller.
11. xSeries 240 / Netfinity 5600 includes two USB ports, three high-speed serial/asynchronous ports, (two NS16550A compatible, one for the Advanced System Management Processor), and one high-speed (up to 2 MB/sec. data transfer speed) bi-directional parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
12. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416) may be installed.
13. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 240 / Netfinity 5600 works with Netfinity Director to provide significant system management function.
When used with optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
14. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter which requires a separate power source. Provides an integrated 10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
15. A maximum quantity of one is supported.
16. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1xX...4xX are not supported). Optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) includes the content of this option.
Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
17. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter (P/N 36L96xx), and a PC Card to 9-pin D-Shell cable which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter integrated Ethernet port and Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together.
18. Provides an ESCON MIC and DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
19. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single server.
20. The Wake on LAN function of this option is not supported by this server.
21. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
22.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English 31=South
Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
23.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South
Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
xSeries 240 / Netfinity 5600 Power, Monitors, Accessories
Part Number
33L37xx
10
94G7448
Description
Power
1,8
250 W Hot-Swap Redundant Power Supply
8
Rack Power Cable Type C12 (3.7m)
8
Free Standing Uninterruptible Power Supply (UPS)
2
SUP102Y
SUP142Y
14RIxxx
11
30RIxxx
11
37L6862
T3347xx
9
31H2Nxx
9
T32N3xx
9
T274Axx
9
11AG1xx
9
APC Smart-UPS 1000
APC Smart-UPS 1400
Rack Mount Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 1400RMB
3
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
7
1. xSeries 240 / Netfinity 5600 include two 250W hot-swap power supplies, each with its own standard country power cord. These standard power supplies are sufficient to operate fully configured systems; however optional 250W Hot-Swap Redundant Power Supply P/N 33L37xx is required to preserve redundancy if any of the following are exceeded:
Single Processor Configuration: Six SL hard disk drive (HDDs) and two PCI adapters (1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
e.g. To preserve power supply redundancy with 3 PCI adapters only 4 SL HDDs can be installed before an optional power supply is required.
Dual Processor Configuration: Four SL hard disk drives (HDDs) and two PCI adapters (1 HH HDD = 2 SL, 1 tape = 2 SL, 1 PCI adapter = 2 SL)
A “non-redundant” LED on the system unit will indicate when 250W has been exceeded. 250 W Hot-Swap Redundant Power Supply (P/N 33L37xx) includes a standard country power cord which requires an additional power source. An independent power source such as a second UPS or second circuit is not required.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 240 / Netfinity 5600 use an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection of a Rack model to a high voltage UPS or PDU.
9. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
10. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United
Kingdom&Arabia.
11. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe.
Part Number Description
Conversion Kits
37L6858 5Ux24D Tower-to-Rack Kit
Rack and NetBAY
1,8
930842P
930842X
9306900
9306910
9306200
37L6888
94G7448
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated front door)
Netfinity NetBAY22
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
2
Space Saver II Keyboard
3, 5
Preferred Keyboard (stealth black)
4
Sleek 2-Button Stealth Black Mouse
28L36xx
6
28L36xx
7
28L3675
1. xSeries 240 / Netfinity 5600 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported devices.
2. Tower models include both a mouse and a keyboard. Rack models include neither.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
6 . Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where ‘ xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The xSeries 240 / Netfinity 5600 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448
(type C12), must be ordered.
To access information on the World Wide Web, use address: http://www.pc.ibm.com
38
Updated
17/10/00
39
Updated
17/10/00 xSeries 240 / Netfinity 5600 Tape Options
Part
Number
Tape Drives
09N4042 10/20 GB NS Internal SCSI Tape Drive
1
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
2
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
1
09N4040 20/40 GB DLT Internal SCSI Tape Drive
1
00N7990 40/80 GB DLT Internal SCSI Tape Drive
2
Bays
Supported
A, B
A, B
A, B
A/B
A/B
SCSI
Interface
(bit)
Form
Factor
8
16 Ultra2 LVD
16
8
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) SL or
133 mm
(5.25”) HH
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
133 mm
(5.25”) HH
133 mm
(5.25”) FH
133 mm
(5.25”) FH
133 mm
(5.25”) HH
Termination
Included
Y
Y
N
N
N
N
68/50-pin
Converter Incl.
Y
N/A
N/A
Y
N/A
Ext. Tape
Enclosures
10L7440
10L7440,
03K8756
3
10L7440
4
,
03K8756
03K8705
4
,
03K8756
03K8705
03K8756
4
3
,
10L7440
03K8756
4
3
,
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
2
00N79xx
11
Tape Autoloaders
DLT Tape Autoloader
A, B N/A
00N7992 120/240GB DDS/4 Tape Autoloader
2
N/A
A/B
16
16 Ultra2 LVD
Desktop
133 mm
(5.25”) FH
Y
N
-
N/A
-
03K8756
3
External Tape Libraries
5
00N79xx
12
DLT Tape Library 16
Desktop orRack
Y -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
6
03K8705 DLT External SCSI Enclosure
7
03K8756 NetMEDIA Storage Expansion Unit EL
8
10L7113 NetMEDIA Systems Management Adapter
9
Associated Options
-
-
-
8/16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
N
N
N
N
-
-
-
03K8756
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
10K2340 Media BayTray and LVD Cable Kit
2,3,10
-
-
16 LVD/SE
16 LVD
Ext.
Int.
Y
Y
N
N
10L7440,
03K8705
-
Note: Netfinity 5600 includes a wide two-drop single-ended terminated cable which can be used for attachment of internal tape drives to the onboard Ultra2 controller when the hot-swap backplane is attached to a RAID controller. If LVD support is required, an optional LVD cable must be ordered. An external Ultra2 SCSI port is available with a 0.8-mm VHDCI connector. External tape enclosures are supported by the standard external SCSI port or PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8-mm VHDCI connector.
1. Non-RAID Configurations: Requires PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which contains a five-drop multi-mode terminated LVD SCSI cable.
2. RAID configurations: Configurations where the hot-swap backplane is cabled to a RAID controller, require the two-drop multi-mode terminated LVD SCSI cable included with Media Bay Tray and LVD
Cable Kit (P/N 10K2340) for support of LVD devices in LVD mode. Use of the included single-ended terminated cable with an LVD device will be limited to single-ended SCSI rules.
3. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340).
4. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
5. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
6. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination
or 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator (P/
N 00N7956).
8. NetMEDIA Storage Expansion Unit EL (P/N 03K8756) is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
9. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
10. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
11 . Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
12 . Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
xSeries 240 / Netfinity 5600 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Part Number
471YExx
33L3060
37L7201
37L7205
01K1325
37L6091
33L37xx
31H2Nxx
SUP102Y
High Availability Application Server
Description
Netfinity 5600 933 MHz/256 KB, 256 MB ECC, Open, 40X, PCI
256 MB, 133 MHz SDRAM ECC RDIMM
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
20/40 GB 8-mm Internal SCSI Tape Drive
ServeRAID-4L Ultra160 SCSI Controller
250 W Hot-Swap Redundant Power Supply
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
APC Smart-UPS 1000
Quantity
1
1
1
1
2
4
1
1
1
Usage
-
512 MB total system memory
9.1 mirrored for NOS
36 GB RAID 5 with hot-spare
-
RAID 1 for OS, RAID 5 for data
Full power redundancy
UPS
This tower server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with enough disk drives to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset...data. A modem could be included to allow out-of-band (non-
LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Part Number
K481Yxx
37L7204
01K1325
37L6889
33L37xx
31H2Nxx
SUP102Y
High Availability File Server
Description xSeries 240 1 GHz/256KB, 256 MB ECC, Open, 40X, PCI
9.1 GB 10K-4 Ultra2 SCSI Hot-Swap SL HDD
20/40 GB 8-mm Internal SCSI Tape Drive
ServeRAID-4H Ultra160 SCSI Controller
250 W Hot-Swap Redundant Power Supply
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
APC Smart-UPS 1000
Quantity
1
1
1
1
1
1
6
Usage
-
45 GB available disk and one hot spare
RAID 5 array, with hot-spare
Full power redundancy
-
-
This tower model is configured to meet the need of server consolidation. Many businesses are trying to get their arms around the dispersed departmental servers that have grown up around the enterprise. By moving multiple servers onto one platform there is only one system to manage, both hardware and software. There is potentially less expensive for service, software licenses, etc., and there is no need to worry about putting all your eggs in one basket because the xSeries240 is designed for high availability. This configuration includes 56
GB of internal HDD storage, features a third power supply which provides fully redundant power, a UPS to help protect the system against a momentary electricity loss, and an internal tape drive that backs up, up to 40 GB per tape...in addition to all the standard features of the xSeries 240.
To access information on the World Wide Web, use address: http://www.pc.ibm.com
40
Updated
17/10/00
41
Updated
17/10/00
IBM xSeries 330
xSeries 330 At-A-Glance Chart
K411Yxx
1
K431Yxx
1
K441Yxx
1
K451Yxx
1
-
-
-
-
800
866
933
1GHz
1/2
1/2
1/2
1/2
256
256
256
256
256MB(R)/4GB
256MB(R)/4GB
256MB(R)/4GB
256MB(R)/4GB
Rack(1U)
Rack(1U)
Rack(1U)
Rack(1U)
1/1
1/1
1/1
1/1
H
H
H
H
Y
Y
Y
Y
10/100 U160
10/100 U160
10/100 U160
10/100 U160
-
-
-
-
0/72.8GB
24X-10X 4/2
0/72.8GB
24X-10X 4/2
0/72.8GB
24X-10X 4/2
0/72.8GB
24X-10X 4/2
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “xSeries 330 Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133 MHz Front-Side Bus (FSB).
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
xSeries 330 Processor Upgrades
Part Number Processor Upgrades with 256 KB Cache
(Full Speed)
SMP
Support
1
Processor Speed
Upgrade
2
10K3810
10K3806
10K0052
800 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
866 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
933 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor
11Y
31Y
41Y
-
11Y
11Y/31Y
10K0053 1 GHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor 51Y 11Y/31Y/41Y
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
2/2
2/2
2/2
2/2
Part Number Memory Description
1
33L3142
33L3144
128 MB, 133 MHz SDRAM ECC RDIMM II
256 MB, 133 MHz SDRAM ECC RDIMM II
33L3146
33L3152
512 MB, 133 MHz SDRAM ECC RDIMM II
1 GB, 133 MHz SDRAM ECC RDIMM II
1. Memory RDIMMs must be installed in sequence from RDIMM connector 1 through connector 4. RDIMM size is not relevent.
xSeries 330 Memory Configurator
Total Memory
1
256 MB
(1 x 256)
Models
384MB
512 MB
128 MB
(33L3123)
1
2 or
Quantity of RDIMMs Added
256 MB
(33L3125)
512 MB
(33L3127)
-
1
-
-
1 GB
(33L3129)
-
-
640 MB 3 -
768 MB
1024 MB
1280 MB
1792 MB
2048 MB
-
-
-
-
-
2 or
-
-
3
-
1
-
2 or
3
4
2
-
-
-
-
1
2304 MB 2
3328 MB
4096 MB (max)
-
-
-
-
-
-
3
4
2
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard memory.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
42
Updated
17/10/00
43
Updated
17/10/00 xSeries 330 Internal Hard Disk Drive and External Storage Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
18.2 GB
(P/N 37L7202)
36.4 GB
(P/N 37L7203)
0 GB
9.1 GB
18.2 GB
36.4 GB
1
2 or
-
Standard on Base Models
-
1
2 or
72.8 GB -
This table does not represent all possible hard drive configurations.
-
-
1
2
1
2 or
-
-
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
18.2 GB
(P/N 37L7205)
Standard on Base Models
-
1
2 or
-
36.4 GB
(P/N 37L7206)
-
-
1
2
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
Diskette / CD-ROM Bay 1 Bay 2
Bay Form Factor Height
1
2
1
89 mm
(3.5”)
89 mm
(3.5”)
HS
HS
1. Boot drive should be located in bay 1.
Front
Access
Yes
Yes
Usage
Open
Open
Part
Number
Description RPM Height Bays
Supported
Max.
Qty.
37L7201
37L7202
37L7203
37L7204
37L7205
Ultra160 Hard Disk Drives
(HDD)
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
7200
7200
7200
10,000
10,000
SL
SL
SL
SL
SL
1...2
1...2
1...2
1...2
1...2
2
2
2
2
2
37L7206
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
External Storage Expansion
Units
1
10,000 SL
Form Factor
1...2
2
00N6xxx
37L0xxx
6
7
Netfinity EXP200 Storage Expansion
Unit
2, 5
Netfinity EXP200 350 W Redundant
Power Supply
5
EXP300 Storage Expansion Unit
3, 5
Rack (3U)
-
19K11xx
8
Rack (3U)
00N71xx
9
FAStT EXP500 Storage Expansion
Unit
4, 5
94G7448 Rack Power Cable Type C12 (3.7m)
5
Rack (3U)
-
1. xSeries 330 does not include an external SCSI connector. Select an optional SCSI controller and then refer to Appendix
D: Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
2. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply. Optional hotswap Netfinity EXP200 350W Redundant Power Supply (P/N 37L0xxx) provides redundancy.
3. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies.
4. FAStT EXP500 Storage Expansion Unit (P/N 00N71xx) includes dual hot-swap 350W power supplies.
5. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
6. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
7. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
8.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
9. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
xSeries 330 Internal SCSI Cabling
xSeries 330 contains a DASD backplane supporting two hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal connectors of the integrated
Ultra160 SCSI controller through a 16-bit LVD SCSI cable. If internal RAID is required, the cable can be attached to the internal connector of the optional RAID adapter. The cable is of sufficient length to attach to adapters in slot 1 but not slot 2.
In configurations where external SCSI device attachment is required, a supported SCSI adapter or ServeRAID controller must be installed.
xSeries 330 I/O Options
Part
Number
Description
Storage Controllers
1
37L6091 ServeRAID-4L Ultra160 SCSI Controller
2
37L6080 ServeRAID-4M Ultra160 SCSI Controller
3
37L6889 ServeRAID-4H Ultra160 SCSI Controller
4
19K4646 PCI Wide Ultra160 SCSI Adapter
5
02K3454 PCI Fast/Wide Ultra SCSI Adapter
6
Fibre Storage Controller and Options
7
00N6881 Netfinity FAStT Host Adapter
19K11xx
14
FAStT200 Storage Server
19K11xx
15
FAStT200 HA Storage Server
19K1121 FAStT200 Redundant RAID Controller
Networking
8
Ethernet
34L0301 Netfinity Gigabit Ethernet SX Adapter
19K4401 Netfinity Gigabit Ethernet Adapter
09N9901 10/100 EtherLink Server Adapter by 3Com
34L4601 Netfinity 10/100 Ethernet Security Adapter
Adapter
Length
Full
Full
Full
Half
Half
Half
-
-
-
PCI Support
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
-
-
-
Slots
Supported
1
1
1
1, 2
1, 2
1, 2
-
-
-
Half
Half
Half
Half
32/64-bit
32/64-bit
32-bit
32/64-bit
1, 2
1, 2
1, 2
1, 2
Token Ring
34L0701 Token-Ring 16/4 PCI Adapter2 with Wake on LAN
9
34L5001 16/4 Token-Ring PCI Management Adapter
9
34L5201 High-Speed 100/16/4 Token-Ring PCI Management Adapter
Communications
10
37L14xx Serial I/O SST 8, 16 and 128 port adapters
11
Systems Management
12
36L96xx
13
Netfinity Advanced System Management PCI Adapter
Half
Half
Half
Half
32-bit
32-bit
32-bit
32-bit
1, 2
1, 2
1, 2
1, 2
Exterior
Connector
Access
Full 32-bit 1
03K9309
36L9654
Netfinity Advanced System Management Interconnect Cable
Kit
Netfinity Advanced System Management Token-Ring
Connection
-
-
-
-
-
-
1. xSeries 330 has an integrated single channel Ultra160 SCSI Controller.
2. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection. External connector is 0.8-mm VHDCI.
3. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two external 0.8-mm VHDCI
Ultra160 connectors.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz Power PC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external
Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8-mm VHDCI.
5. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and one external 0.8-mm VHDCI Ultra160 connector. Support for external SCSI devices only. A five-drop terminated LVD SCSI cable is included but not supported for use in this server.
6. For use in supporting external SCSI devices such as tape drives.
7. See the Fibre Array Solutions section for additional configuration information.
8. xSeries 330 includes dual full-duplex, 10/100 Mbps Ethernet controllers.
9. The Wake on LAN function of this option is not supported by this server.
10. xSeries 330 includes two USB ports and a high speed serial/asynchronous port (NS16550A compatible).
11. See Appendix E for details on Serial I/O options and configuration limitations.
12. xSeries 330 has a single integrated system management port and a single RS485 port.
13. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi
14.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English
31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
15.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English,
45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
44
Updated
17/10/00
45
Updated
17/10/00 xSeries 330 Power, Monitors, Accessories
Part Number
14RIxxx
10
30RIxxx
10
37L6862
94G7448
06P4792
T3347xx
9
31H2Nxx
9
T32N3xx
9
T274Axx
9
11AG1xx
9
APC Smart-UPS 1400RMB
3
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Rack Power Cable Type C12 (3.7m)
8
Cable Chain Technology Cable Kit
5
Description
Power
1,8
Uninterruptible Power Supply (UPS)
2
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
6
6
G78 Color Monitor 17” (406.4mm, 16.0” Viewable Image Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable Image Size), stealth black
7
1. The xSeries 330 includes a worldwide, voltage sensing 200 W power supply and a standard country power cord.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. The xSeries 330 uses an SVGA controller (S-3 Savage4 chipset) with 8Mb of video memory. A Cable Chain Technology Cable Kit P/N 06P4792 is required for the attachment of console devices to one or multiple chained xSeries 330s. The kit contains a 2M (6.5 feet) KVM breakout cable for attachment to a keyboard. mouse and monitor, as well as a 2 M (6.5 feet) KVM chaining cable for connecting two xSeries 330s together when the standard 245 mm (9.6 inches) KVM chaining cable is not long enough, A maximum of 42 xSeries 330s are supported in a single chain. No more than one kit may be used.
6. Installation within a rack requires optional Monitor Compartment P/N94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. Rack Power Cable P/N 94G7448 must be ordered for power connection of a rack model to a high voltage UPS or PDU.
9. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
10. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United
Kingdom, EUR=Europe
Part Number Description
Rack and NetBAY
1,2,10
930842P
930842X
9306900
06P6010
9306910
Netfinity Enterprise Rack
4
Netfinity Enterprise Expansion Cabinet
4
Netfinity Rack
2, 5
Netfinity Rack Front Door Kit
3
Netfinity Rack (includes perforated front door)
5
Netfinity Rack Extension Kit
Netfinity NetBAY22
4, 5
36L9703
9306200
36L9702
36L9701
37L6888
94G7448
NetBAY22 Rack Extension Kit
Netfinity NetBAY3E
4, 6
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
10
Keyboard and Mouse
7
06P4792
28L36xx
11
28L36xx
12
Cable Chain Technology Cable Kit
7
Space Saver II Keyboard
8
Preferred Keyboard (stealth black)
9
28L3675 Sleek 2-button Stealth Black Mouse
1. xSeries 330 is housed in a 19” rack mountable drawer and requires one of the racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported devices. To provide adequate cooling, Blank Filler Panel Kit P/N 94G6670 should be placed on the front of any unused rack space. If non-IBM racks are to be used, assure that both the front and rear doors offer a minimum of 48% open area uniformely distributed and in line with installed servers. A clearance of 51 to 64-mm (2 to 2-1/2 inches) must be maintained between the front door and the system unit’s front bezel. The rear door must maintain the same or greater clearance. Clearance between the EIA mounting rails and rack side covers must be less than 13-mm (1/2 inch) to prevent air re-circulation from back to front. Non-rack or NetBAY3E installations are not supported.
2. To enable proper cooling, optional Netfinity Rack Front Door Kit P/N 06P6010 must be installed or the front door must be removed. See also Rack P/N 9306910.
3. Provides a perforated front door replacement for the standard glass door of a Netfinity Rack P/N 9306900.
4. To enable proper cooling, the front door (bezel for NetBAY3E) must be removed.
5. Although not required, the use of an appropriate Extension Kit is recommended
6. Up to three xSeries 330s are supported for installation in a NetBAY3E. and up to three NetBAY3Es are supported while installed beneath a Netfinity 8500R. An 8500R must be installed on top of the NetBAY3E.
7. A Cable Chain Technology Cable Kit P/N 06P4792 is required for the attachment of console devices to one or multiple chained xSeries 330s. The kit contains a 2M (6.5 feet) KVM breakout cable for attachment to a keyboard. mouse and monitor, as well as a 2 M (6.5 feet) KVM chaining cable for connecting two xSeries 330s together when the standard 245 mm (9.6 inches) KVM chaining cable is not long enough, A maximum of 42 xSeries 330s are supported in a single chain. No more than one kit may be used.
8. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
9. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
10. The xSeries 330 ships with a standard country power cord. For connection to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
11 . Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland,
19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
12. Where ‘ xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
xSeries 330 Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
09N4041 12/24 GB DDS/4 4-mm Internal SCSI Tape Drive
09N4042 10/20GB NS Internal SCSI Tape Drive
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
09N4040 20/40 GB DLT Internal SCSI Tape Drive
00N7990 40/80 GB DLT Internal SCSI Tape Drive
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
8
8
16 Ultra2 LVD
8
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
89 mm
(3.5”) SL or
133 mm
(5.25”) HH
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
133 mm
(5.25”) FH
133 mm
(5.25”) FH
133 mm
(5.25”) FH
Y
Y
Y
N
N
N
Y
Y
N/A
Y
N/A
N/A
03K8756
03K8756
03K8756
2
03K8756
03K8756
2
03K8756
2
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader N/A
1
16 Ultra2 LVD
133 mm
(5.25”) FH
N N/A 03K8756
2
00N79xx
7
External Tape Libraries
3
DLT Tape Library
External Tape Enclosures
03K8756 NetMEDIA Storage Expansion Unit EL
4
10L7113 NetMEDIA Systems Management Adapter
5
-
-
-
16
16
16 LVD
Rack
Rack
-
Y
Y
N
N/A
N
N
-
-
03K8756
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2,6
16 LVD Int.
Y N -
1. xSeries 330 does not support internal tape drives and does not include an external SCSI connector. An external tape or internal tape with a tape enclosure, supported SCSI adapter and appropriate cable must be selected. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which has an external 0.8-mm VHDCI connector. Select tape drive, enclosure and supported adapter then use Appendix D: Cables-Storage Units-Controllers to select an appropriate external cable.
2.LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop mult-mode terminated cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
5. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
6. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
7. Where ‘xx’ represents a country specific power cord code: Rack versions - 81=EU1, 82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat xSeries 330 Sample Configurations
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
46
Updated
17/10/00
47
Updated
17/10/00
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
1
Part Number Description Quantity
K441Yxx
37L7205
06P4792
31H2Nxx
28L36xx
14RIxxx xSeries 330 (Pentium III 933/256 MB/0 GB)
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
2
Cable Chain Technology Cable Kit
3
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
1
2
1
1
1
1
1. This example shows a 19” rackable configuration. The rack components are not included.
2. For a total of 36.4 GB of internal storage.
3. A single Cable Chain Technology Cable Kit P/N 06P4792 is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single monitor, mouse and keyboard.
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this is mind, the xSeries 330 was selected to provide an affordable price point for the growing Internet server market with two-way Pentium III processing, 256 MB of system memory (expandable to 4GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods are used you can add the appropriate adapter.
File and Print Server
1
Part Number Description Quantity
K451Yxx
33L3142
37L7206
06P4792 xSeries 330 (Pentium III 1 GHz/256 MB/0 GB) xSeries 128 MB 133 MHz ECC SDRAM RDIMM
2
36.4 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
3
Cable Chain Technology Cable Kit
4
2
1
1
1
31H2Nxx
28L36xx
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
Space Saver II Keyboard
1
1
14RIxxx APC Smart-UPS 1400RMB 1
1. This example shows a 19” rackable configuration. The rack components are not included.
2. For a total of 384 MB of system memory.
2. For a total of 72.8 GB of internal storage.
4. A single Cable Chain Technology Cable Kit (P/N 06P4792) is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single monitor, mouse and keyboard.
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an xSeries 330 with 384MB of memory and 72.8 GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage expansion still available. Demanding network traffic is effectively handled by the standard 100 Mbps Ethernet connection.
This configuration also includes a UPS to keep the system protected during power surges and outages.
Application Server
1
Part Number
K431Yxx
10K3810
33L3144
37L7205
06P4792
Description xSeries 330 (Pentium III 800/256 MB/0 GB)
800 MHz Upgrade with 133MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor xSeries 256 MB 133 MHz ECC SDRAM RDIMM
2
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
3
Cable Chain Technology Cable Kit
4
Quantity
1
31H2Nxx
28L36xx
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
Space Saver II Keyboard
14RIxxx APC Smart-UPS 1400RMB
1. This example shows a 19” rackable configuration. The rack components are not included.
2. For a total of 512 MB of system memory.
2. For a total of 36.4 GB of internal storage.
4. A single Cable Chain Technology Cable Kit P/N 06P4792 is required for attachment of one or multiple (up to 42) chained xSeries 330s to a single monitor, mouse and keyboard.
1
1
1
2
1
1
1
An application server differs from a file and print server in that it has a higher workload, in providing application serving requirements for users. With this in mind, the xSeries 330 was selected to provide an affordable price point for an application server, with two-way Pentium III processing, 512 MB of system memory (expandable to 4 GB), and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
IBM xSeries 340 and Netfinity 4500R
xSeries 340 / Netfinity 4500R At-A-Glance
xSeries 340
K66RYxx
1
1 GHz 1/2 256
128MB
(R)/4GB
Rack(3U) 1/2 P, H, F
O - Power
3
S - Fans
Y 10/100 D,U160 4/2
4
0/218.4
GB
5
24X-
10X
8/6
5
5/5
Netfinity 5600
62RYMxx
61RYMxx
63RYTxx
64RYTxx
65RYTxx
1
1
1
1
1
24/10/00
-
-
-
-
667
733
800
866
933
1/2
1/2
1/2
1/2
1/2
256
256
256
256
256
128MB
(R)/4GB
128MB
(R)/4GB
128MB
(R)/4GB
128MB
(R)/4GB
128MB
(R)/4GB
Rack (3U)
Rack(3U)
Rack(3U)
Rack(3U)
Rack(3U)
1/2
1/2
1/2
1/2
1/2
P, H, F
P, H, F
P, H, F
P, H, F
P, H, F
O - Power
3
S- Fans
O - Power
3
S - Fans
O - Power
3
S - Fans
O - Power
3
S - Fans
O - Power
3
S - Fans
Y
Y
Y
Y
Y
10/100
10/100
10/100
10/100
10/100
D,U160
D,U160
D,U160
D,U160
D,U160
4/2
4/2
4/2
4/2
4/2
4
4
4
4
4
0/218.4
GB
0/218.4
GB
GB
GB
5
5
0/218.4
5
0/218.4
5
0/218.4
GB
5
24X-
10X
24X-
10X
24X-
10X
24X-
10X
24X-
10X
8/6
8/6
8/6
8/6
8/6
5
5
5
5
5
5/5
5/5
5/5
5/5
5/5
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See Power, Monitors, Accessories section for supported IBM racks.
2. Intel Pentium III processor with 133 MHz front-side bus.
3. Power supply redundancy requires installation of optional 270 W Hot-Swap Redundant Power Supply P/N 37L6879.
4. xSeries 340 / Netfinity 4500R includes two available removable media bays that can be converted to three slim-line (SL) hot-swap bays with the addition of optional 3-Pack Hot-Swap DASD Upgrade (P/
N 33L5050), thus doubling internal hard disk drive storage capacity.
5. Assumes installation of optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050 which converts the two available removable media bays into three slim-line (SL) hot-swap bays.
6. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
7. Not available from IBM after this date. Business Partner inventory may be available.
xSeries 340 / Netfinity 4500R Processor Upgrades
Part Number Processor Upgrades with 256 KB Cache
(Full Speed)
SMP Support
1
Processor Speed Upgrade
2
00N7949
00N7943
10K2338
Netfinity 667 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 733 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 800 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
Netfinity 866 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
2RY
1RY
3RY
-
2RY
1RY/2RY
19K4630
19K4631
19K4640
Netfinity 933 MHz 133 FSB/256 KB Upgrade with Pentium III Processor
1 GHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache
Pentium III Processor
4RY
5RY
6RY
All 1...3RY
All 1...4RY
All 1...5RY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
48
Updated
17/10/00
49
Updated
17/10/00
RDIMM Socket 4
RDIMM Socket 3
RDIMM Socket 2
RDIMM Socket 1 xSeries 340 / Netfinity 4500R Memory Configurator
Total Memory
1
128 MB
(1 x 128)
Models
256 MB
384 MB
128 MB
(33L3123)
1
2 or
Std. (R)DIMM
Recommended order of installation:
Slot 1-2-3-4
Part Number Memory Description
1
33L3123
33L3125
128 MB, 133 MHz SDRAM ECC RDIMM II
256 MB, 133 MHz SDRAM ECC RDIMM II
33L3127
33L3129
512 MB, 133 MHz SDRAM ECC RDIMM II
1 GB, 133 MHz SDRAM ECC RDIMM II
1. The recommended order of installation is in sequence from Socket 1 to Socket 4.
Memory size is not a factor.
512 MB 3
Quantity of RDIMMs Added
256 MB
(33L3125)
-
1
-
512 MB
(33L3127)
-
-
-
1 GB
(33L3129)
-
-
-
640 MB
896 MB
1024 MB
1152 MB
1664 MB
2048 MB
-
-
-
-
-
-
2 or
3
4
2
-
-
-
1
-
-
2 or
3
4
2
-
-
-
1
-
-
2176MB
3200 MB
4096 MB (max)
-
-
-
-
-
-
-
-
-
2
3
4
2
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. Requires removal of standard memory.
xSeries 340 / Netfinity 4500R Internal Hard Disk Drive and External Storage Coinfigurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
18.2 GB
(P/N 37L7202)
36.4 GB
(P/N 37L7203)
9.1 GB
10,000RPM Hard Disk Drives (HDDs)
(P/N 37L7204)
18.2 GB
(P/N 37L7205)
36.4 GB
(P/N 37L7206)
0 GB
9.1 GB 1
Standard on Base Models
1
Standard on Base Models
-
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
72.8 GB
91 GB
2
3
4
2
5
6
-
-
2
2
1
-
2
-
3
4
2
5
2
6
2
-
-
-
1
-
-
2
-
2
3
4
2
5
2
6
2
-
-
1
-
2
-
3
4
2
5
2
6
2
-
-
-
1
-
-
2
-
109.2 GB
145.6GB
-
-
3
4
2
5
2
-
-
3
4
2
5
2
182 GB
218.4 GB
(max.)
-
-
-
6
2
-
-
-
6
2
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Requires Netfinity 3-Pack Ultra 160 Hot-Swap Expansion Kit P/N 33L5050.
Bay
-
-
1...3
A, B
4...6
3
Form Factor
89 mm
(3.5”)
133 mm (5.25”)
HS
133 mm
(5.25”)
HS
RM A
RM B
HS 4
HS 5
HS 6
Height
Diskette
CD-ROM
Removable Media
(RM)
-
-
SL
1
HH
2
SL
1
Hot-Swap
(HS)
1
Front
Access
Yes
Yes
Yes
Yes
Yes
2 3
Usage
Diskette
IDE CD-
ROM
Open
Open
Open
1. Half-High devices are NOT supported.
2 Two half-high (HH) bays can be combined to support a single full-high (FH) device. By installing Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N
33L5050), bays A and B are transformed into three SL hot-swap
bays 4...6.
3. To enable bays 4...6, optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
(P/N 33L5050) is required.
Part
Number
Description RPM Height Bays
Supported
2
Max.
Qty.
37L7201
37L7202
37L7203
37L7204
37L7205
37L7206
19K0655
19K0656
Ultra160 Hard Disk Drives
(HDD)
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
7200
7200
7200
10,000
10,000
10,000
15000
15000
SL
SL
SL
SL
SL
SL
SL
SL
1...6
1...6
1...6
1...6
1...6
1...6
1...6
1...6
6
1
6
1
6
1
6
1
6
1
6
1
6
1
6
1
33L5050
Associated Options
Netfinity 3-Pack Ultra160 Hot-Swap
Expansion Kit
2
3 x SL 4...6
-
External Storage Expansion
Units
3
Form Factor
00N6xxx
37L0xxx
8
9
Netfinity EXP200 Storage Expansion
Unit
4, 7
Netfinity EXP200 350 W Redundant
Power Supply
7
EXP300 Storage Expansion Unit
5, 7
19K11xx
10
00N71xx
11
FAStT EXP500 Storage Expansion
Unit
6, 7
94G7448 Rack Power Cable Type C12 (3.7m)
7
Rack (3U)
-
Rack (3U)
Rack (3U)
-
1. Netfinity 4500R ships with Bays 1...3 enabled. To enable installation of greater than three HDDS requires Netfinity 3-
Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050.
2. Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050 includes a hot-swap backplane and associated components for two cabling options. The backplane may be cabled directly to the second integrated SCSI channel or be supported by the same SCSI channel as the standard backplane through the use of an included repeater card.
3. Select an optional SCSI controller and then refer to Appendix D: Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and single hot-swap 350W power supply. Optional hot-swap
Netfinity EXP200 350W Redundant Power Supply (P/N 37L0xxx) provides redundancy.
5. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies.
6. FAStT EXP500 Storage Expansion Unit (P/N 00N71xx) includes dual hot-swap 350W power supplies.
7. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
8. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
9. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
10.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
11. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
xSeries 340 / Netfinity 4500R Internal SCSI Cabling
The xSeries 340 and Netfinity 4500R contain a DASD backplane supporting three hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal connectors of the integrated Ultra160 SCSI controller through a 16-bit LVD SCSI cable. A single-drop 16-bit SCSI cable is included with the server for attachment from the second internal Ultra160 connector to a removable media bay device. If an LVD attachment is required or more than one media bay device is required, a terminated two-drop 16-bit LVD
SCSI cable available in the Netfinity Media Bay Conversion Kit P/N 10K2340 must be ordered. No external SCSI port is included.
If optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050 is installed in the removable media bays, four cabling options are possible. Included with this option is a 16-bit LVD SCSI cable, identical to the one used for attachment of the standard hot-swap backplane, which can be used to attach the optional 3-Pack Ultra160 Hot-Swap backplane directly to the second onboard SCSI connector or that of an optional RAID adapter. Alternatively, a repeater card and cable are included which may be used to link the standard hotswap backplane and optional hot-swap backplane together while utilising the standard SCSI cable for attachment of the repeater card to one of the onboard SCSI connectors or that of an optional RAID adapter.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
50
Updated
17/10/00
51
Updated
17/10/00 xSeries 340 / Netfinity 4500R I/O Options
Part
Number
Description
19K0564
37L6086
37L6091
37L6080
37L6889
19K4646
02K3454
00N6881
19K11xx
21
19K11xx
22
19K1121
34L1501
34L0301
34L0701
Storage Controllers
1
Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
2
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
3
ServeRAID-4L Ultra160 SCSI Controller
4
ServeRAID-4M Ultra160 SCSI Controller
5
ServeRAID-4H Ultra160 SCSI Controller
6
PCI Wide Ultra160 SCSI Adapter
16
PCI Fast/Wide Ultra SCSI Adapter
7
Fibre Storage Controllers and Options
8
Netfinity FAStT Host Adapter
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT200 Redundant RAID Controller
Networking
9
Ethernet
Netfinity 10/100 Ethernet PCI Adapter 2
Netfinity Gigabit Ethernet SX Adapter
Token Ring
Token-Ring 16/4 PCIAdapter 2 with Wake on LAN
17
Communications
10
Adapter
Length
Full
Full
Full
Full
Full
Half
Half
Half
-
-
-
Half
Half
Half
PCI Support
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
-
-
-
32-bit
32/64-bit
32-bit
Slots
Supported
1...5
1...5
1...5
1...5
1...5
1...5
1...5
1...5
-
-
-
1...5
1...5
1...5
Exterior Connector Access
36L96xx
20
03K9309
36L9654
Systems Management
11
Netfinity Advanced System Management PCI Adapter
12
Netfinity Advanced System Management Interconnect Cable
Kit
14
Netfinity Adv6nced System Management Token-Ring
Connection
15
Full
-
-
32-bit
-
-
1...5
13
-
-
10L7368
Host Attach
Netfinity ESCON Adapter
18
Full 32-bit 1...5
19
1. xSeries 340 / Netfinity 4500R include a dual-port, dual-channel Ultra160 SCSI controller for internal use only. No standard external port is available. See “Internal SCSI Cabling” for cabling alternatives. Due to Netfinity 4500R’s low profile, some adapters with connectors on the top edge may not have sufficient clearance to attach a cable. Cabling interferences are identified in the footnotes.
2. Netfinity ServeRAID-3L Ultra2 SCSI Adapter II (P/N 19K0564) provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
3. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter (P/N 37L6086) provides 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal connector is not accessible due to a cabling interference. Includes 32 MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection. External connector is 0.8-mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two external
0.8-mm VHDCI Ultra160 connectors.
6. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache. The internal connectors are not accessible due to cabling interference. Four external Ultra160 0.8-mm VHDCI connectors are available.
7. PCI Fast/Wide Ultra SCSI Adapter provides one external 68-pin high density connector. The internal connectors are not accessible due to a cabling interference.
8. See Fibre Array Solutions section for additional configuration information.
9. xSeries 340 / Netfinity 4500R include a full-duplex, 10/100 Mbps Ethernet PCI controller.
10. xSeries 340 / Netfinity 4500R include two USB ports, two serial and one parallel port.
11. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into xSeries 340 / Netfinity 4500R works with Netfinity Director to provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) and Netfinity Advanced System Management Interconnect Cable Kit (P/N
03K9309) additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
12. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter, which requires a separate power source. Provides an integrated
10/100 Ethernet port and a PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).
13. A maximum quantity of one is supported.
14. Required for all xSeries and Netfinity Servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1xX...4xX are not supported). Optional Netfinity Advanced System Management PCI Adapter (P/N 36L96xx) includes the contents of this option.Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more
than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
15 Contains an IBM Turbo 16/4 Token-Ring PCI card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter (P/N 36L96xx), and a PC Card to 9-pin
D-Shell cable which is routed to an available adapter slot opening (reduces available slots by one). The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and
Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together.
16. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm VHDCI connector. Only one of the two connectors may be utilised.
17. The Wake on LAN function of this option is not supported by this server.
18. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
19. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single server.
20. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
21.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English
31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
22.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English,
45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
xSeries 340 / Netfinity 4500R Power, Monitors, Accessories
Part Number
37L6879
94G7448
14RIxxx
10
30RIxxx
10
37L6862
T3347xx
9
31H2Nxx
9
T32N3xx
9
T274Axx
9
11AG1xx
9
Description
Power
1,8
270 W Hot-Swap Redundant Power Supply
8
Rack Power Cable Type C12 (3.7m)
8
Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 1400RMB
3
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
G78 Color Monitor 17” (406.4-mm, 16” Viewable Image Size), stealth black
6
6
6
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
7
1. xSeries 340 / Netfinity 4500R include a single 270 W, hot-swap power supply and a single standard country power cord. Power supply redundancy can be achieved with the addition of optional 270 W Hot-Swap Redundant Supply P/N 37L6879.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. xSeries 340 / Netfinity 4500R use an SVGA controller (S3 Savage4 chipset) with 8 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit II P/N 37L6888 and Netfinity Rack
Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection of a rack model to a high voltage UPS or PDU.
9. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa,
CH=Switzerland, UK=UK, EU=Europe.
10. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia,
SAF=South Africa, SWS=Switzerland, UKM=United Kingdom, EUR=Europe.
Part Number
930842P
Description
Rack and NetBAY
1,8
Netfinity Enterprise Rack
930842X
9306900
9306910
9306200
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated front door)
Netfinity NetBAY22
37L6888
94G7448
28L36xx
6
28L36xx
7
Netfinity Flat Panel Monitor Rack Mount Kit II
Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
2
Space Saver II Keyboard
3, 5
Preferred Keyboard (stealth black)
4
28L3675 Sleek 2-Button Stealth Black Mouse
1. xSeries 340 / Netfinity 4500R are housed in a 19” rack mountable drawer and requires one of the racks listed here. See IBM
Netfinity Rack Cabinet and Options section for IBM rack supported devices.
2. xSeries 340 / Netfinity 4500R ship without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
5. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
6 . Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English,
44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium,
19K3836=Russia, 19K3837=Poland.
7. Where ‘ xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian,
34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The xSeries 340 / Netfinity 4500R ships with a standard country power cord. For connection to a high voltage UPS or PDU, a
Rack Power Cable P/N 94G7448 (type C12), must be ordered.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
52
Updated
17/10/00
53
Updated
17/10/00 xSeries 340 / Netfinity 4500R Tape Options
Part
Number
Description Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
Ext. Tape
Enclosures
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
2
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
09N4040 20/40 GB DLT Internal SCSI Tape Drive
00N7990 40/80 GB DLT Internal SCSI Tape Drive
2
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
2
A, B
A, B
A/B
A/B
A, B
16 Ultra2 LVD
16
8
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
133 mm
(5.25”) HH
133 mm
(5.25”) FH
133 mm
(5.25”) FH
133 mm
(5.25”) HH
Y
N
3
N
3
N
3
N
3
N/A
N/A
Y
N/A
N/A
03K8756
1
03K8756
03K8756
03K8756
1
03K8756
1
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader
2
A/B 16 Ultra2 LVD
133 mm
(5.25”) FH
N
3
N/A 03K8756
1
00N79xx
8
External Tape Libraries
4
DLT Tape Library
External Tape Enclosures
03K8756 NetMEDIA Storage Expansion Unit EL
5
10L7113 NetMEDIA Systems Management Adapter
6
-
-
-
16
16
16 LVD
Rack
Rack
-
Y
Y
N
N/A
N
N
-
-
03K8756
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
1,2,7
16 LVD Int.
Y N -
Note: xSeries 340 / 4500R includes a single drop, 16-bit, single-ended, non-terminated SCSI cable for attachment of a device in Bay A or B to the second integrated Ultra160 SCSI channel or supported adapter. No external SCSI port is available. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) which has an external 0.8-mm VHDCI connector.
1.LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL (P/N 03K8756) requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit (P/N 10K2340) which contains a single two-drop multi-mode terminated cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
2. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, LVD SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340)
3. Termination requires installation of the multi-mode terminated, two-drop, LVD SCSI cable included with optional Media Bay Tray and LVD Cable Kit (P/N 10K2340)
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. NetMEDIA Storage Expansion Unit EL (P/N 03K8756) is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
6. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
7. Media Bay Tray and LVD Cable Kit (P/N 10K2340) includes an internal two-drop multi-mode terminated LVD SCSI cable.
8. Where ‘xx’ represents a country specific power cord code: Rack versions - 81=EU1, 82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
xSeries 340 / Netfinity 4500R Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number Description
65RYTxx
33L3123
37L6086
37L7201
01K1325
10K2340
Netfinity 4500R 340Pentium III 933 MHz/256 KB L2, 128 MB ECC, OPEN, 24X, PCI (Rack 3U)
128 MB SDRAM ECC RDIMM II
1
Netfinity ServeRAID 3HB Ultra2 SCSI Adapter
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB 8-mm Internal SCSI Tape Drive
Media Bay Tray and LVD Cable Kit
31H2Nxx
14RIxxx
37L6879
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
270 W Hot-Swap Redundant Power Supply
Industry Standard 19” Rack, EIA-310D, min. depth of 28” (711 mm)
9306200
28L36xx
Netfinity NetBAY22
Space Saver II Keyboard
94G6670 Blank Filler Kit
1. For a total of 256 MB of system memory.
2. For a total of 27.3 GB of RAID protected hot-swap, hot-spare internal storage.
Quantity
1
1
1
4
1
1
1
1
1
1
1
2
An internet server is a server that handles all requests from the Internet (intranet or extranet). Usually this type of server has the same characteristics as a file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (Firewall). In the case of an internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does. With this in mind the xSeries 340 was selected to provide an affordable price point for the growing internet server market, 256 MB of system memory (expandable to 4 GB), and availability features such as RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the internet. Usually fast Ethernet routers are used, but if other methods are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
Application Server
Part Number Description
K66RYxx
19K4630
33L3125
37L6086
37L7202
01K1325 xSeries 340 Pentium III 1 GHz/256 KB L2, 128 MB ECC, OPEN, 24X, PCI (Rack 3U) xSeries1 GHz Upgrade with 133 FSB and 256 KB Advanced Transfer Cache Pentium III Processor
256 MB 133 MHz SDRAM ECC RDIMM II
Netfinity ServeRAID 3HB Ultra2 SCSI Adapter
18.2 GB Ultra160 SCSI Hot-Swap SL HDD
2
20/40 GB 8-mm Internal SCSI Tape Drive
10K2340
31H2Nxx
37L6879
14RIxxx
Media Bay Tray and LVD Cable Kit
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
Netfinity 270 W Hot-Swap Redundant Power Supply
9306200
28L36xx
94G6670
APC Smart-UPS 1400RMB
Industry Standard 19” Rack, EIA-310D, min. depth of 28” (711 mm)
Netfinity NetBAY22
Space Saver II Keyboard
Blank Filler Kit
1. For a total of 384 MB of system memory.
2. For a total of 54.6 GB of usable RAID 5 storage.
Quantity
1
1
1
1
3
1
1
1
1
1
1
1
2
An application server is designed to handle a high workload while providing application serving requirements for users. With this in mind, the xSeries 340 was selected to provide an affordable price point for an application server, with two-way Pentium III processing, 384 MB of system memory (expandable to 4GB),and availability features such as batterybacked cache, RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
54
Updated
17/10/00
55
Updated
17/10/00
IBM Netfinity 1000 Value Model Configurator
751YExx 24/10/00 650
1
1/1 256 64/768 Tower 1/1 10/100
761YExx 700
1
1/1 256 64/768 Tower 1/1 10/100
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance
1. Intel Pentium III processor.
2. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
3. Not available from IBM after this date. Business Partner inventory may be available.
IDE
IDE
4/2
4/2
10.1/
30.3GB
10.1/
30.3GB
40X-17X
40X-17X
6/3
6/3
6/6
6/6
Netfinity 1000 Value Model Processor Upgrades
Processor Upgrade
Part
Numbers
Upgrade
Support
1
Netfinity 700MHz/256KB Pentium III Processor Upgrade 10K2165 51Y
1. Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest FLASH BIOS, access URL http:// www.pc.ibm.com/pc/us, select PERSONAL SUPPORT then select IBM SERVER SUPPORT. Choose a machine type then select Downloadable files and choose the category labled “BIOS”.
DIMM Socket
DIMM Socket
DIMM Socket
DIMM Description
Netfinity 1000 Value Model Memory Configurator
Part Numbers
64MB 100MHz ECC SDRAM DIMM 01K1130
128MB 100MHz ECC SDRAM DIMM
256MB 100MHz ECC SDRAM RDIMM
1
01K1131
01K1132
1. P/N 01K1132 is a registered DIMM and is not compatible with P/N 01K1130 or P/N 01K1131. Installation of this RDIMM requires replacement of any standard DIMM.
Total
Memory
64MB
128MB
192MB
256MB
All Models
64MB DIMM Standard
1 x 01K1130
1 x 01K1131
1 x 01K1131, 1 x 01K1130
320MB
384MB
512MB
2 x 01K1131
3 x 01K1131
1
2 x 01K1132
1
3 x 01K1132
1
768MB (max)
This table does not represent all possible memory configurations.
1. Replace standard DIMM.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
56
Updated
17/10/00
Netfinity 1000 Value Model Internal Hard Disk Drive Configurator
CD ROM
Bay 2
Bay 3
Diskette
Total Internal Disk
Storage
1
All Models
10.1GB
20.2GB
Standard
1 x 33L4958
30.3GB
2 x 33L4958
1. Total Internal Storage listed is within + 0.2GB unless otherwise noted.
Bay 5
Bay 6
Bays Form
Factor
1
2
3
4
5
6
133 mm
(5.25”)
133 mm
(5.25”) 1
89 mm
(3.5”)
89 mm
(3.5”)
89 mm
(3.5”)
89 mm
(3.5”)
Height Front
Access
HH
HH
SL
SL
SL
2
SL
2 yes yes yes yes no no
Usage
32x IDE CD-ROM open open diskette open open
1. A 3.5” conversion kit is standard in Bay 2 for installation of 3.5” devices.
2. Two slim-line bays can be combined to support a single half-high (HH) device.
Part
Numbers
33L4958
Description
10.1GB 7200rpm EIDE HDD
1
RPM
7200
Height
SL
1. This Hard Disk Drive is the only one supported in the Netfinity 1000 IDE Models.
Bays
Supported
2,3,5,6
Max.
Qty.
3
Internal Cabling
The Netfinity 1000 Value models have an onboard IDE Storage Controller that provides support for up to four internal IDE devices. A two-drop IDE cable is attached to one of the
IDE controller connectors and is used for the standard IDE CD-ROM drive and 10.1GB 7200rpm EIDE Hard Disk Drive. A second two-drop IDE cable is shipped with the server to be used for installing a second and third 10.1GB EIDE HDD as desired. This cable attaches to the second connector of the IDE controller.
Netfinity 1000 Value Model I/O Options
Part
Number
Description
02K3454
34L1501
34L0701
34L5201
37L14xx
Storage Controllers
1
PCI Fast/Wide Ultra SCSI Adapter
2
Networking
3
Ethernet
Netfinity 10/100 Ethernet PCI Adapter 2
Token Ring
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
4
High speed 100/16/4 Token Ring PCI Management Adapter
Communications
Serial I/O SST8, 16 and 128 port adapters
5
Systems Management
6
Adapter
Length
Half
Half
Half
Half
Half
PCI
Support
32-bit
32-bit
32-bit
32-bit
32-bit
Slots
Supported
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1. The Netfinity 1000 IDE models ship with integrated IDE controller and cable for support of up to 3 hard disk drives. Optional SCSI support is limited to Tape Drives only.
No SCSI hard disk drives are supported.
2. Supports attachment of internal tape drive only. Includes 16-bit SCSI cable.
3.The Netfinity 1000 IDE models have an integrated 10/100 PCI Ethernet Controller.
4.The Wake on LAN function of this option is not supported by Netfinity Servers.
5. See Appendix E for details on Serial I/O options and configuration limitations.
6. The Netfinity 1000 IDE models provide the following integrated system management features - Vital Product Data (VPD) plus thermal, voltage, and fan sensors.
57
Updated
17/10/00
I/
Netfinity 1000 Value Model Power, Monitors, Accessories
Part Number
SUP072Y
SUP102Y
Description
Power
1
Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 700
APC Smart-UPS 1000
Monitors
T3347xx
3
31H2Nxx
3
T32N3xx
3
T274Axx
3
11AG1xx
3
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
1. The Netfinity 1000 model 42Y includes a 330 W voltage sensing power supply.
2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.
3. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa,
CH=Switzerland, UK=UK, EU=Europe.
Netfinity 1000 Value Model Tape Option
Part Number
09N4042
Description
IBM 10/20GB NS Internal SCSI Tape Drive
1
Bays
Supported
SCSI Interface
(bit)
2, 3 8
Form
Factor
89 mm (3.5”)
SL or 133 mm
(5.25”) HH
1. Requires PCI Fast/Wide Ultra SCSI Adapter P/N 02K3454, which includes a SCSI cable.
Termination
Included
Y
68/50-pin
ConverterIncl.
Y
Ext. Tape
Enclosures
N/A
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
58
Updated
17/10/00
Netfinity 1000 Value Model Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Workgroup Internet Server
Part Number Description
761YExx
01K1130
33L4958
02K3454
09N4042
IBM Netfinity 1000 IDE Pentium III 700/256KB L2, 64MB ECC, 10.1GB
64MB 100MHz ECC SDRAM DIMM
1
10.1GB 7200rpm EIDE HDD
PCI Fast/Wide Ultra SCSI Adapter
2
IBM 10/20GB NS Internal SCSI Tape Drive
31H2Nxx
SUP102Y
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth-black
1. For a total of 128MB of system memory.
2. Includes a 16-bit SCSI Cable
APC Smart-UPS 1000
Quantity
1
1
1
1
1
1
1
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an Internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (Firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider(ISP), instead of many clients like a file server does.
With this in mind, the IBM Netfinity 1000 (IDE) was selected to provide an affordable price point for the growing Internet server market with Pentium III processing, 128MB of system memory (expandable to 768MB), integrated 100/10 Ethernet controller, high-performance storage, and power protection with an APC Smart-UPS.
The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
File & Print Server
Part Number Description
761YExx
01K1130
02K3454
09N4042
IBM Netfinity 1000 IDE Pentium III 700/256KB L2, 64MB ECC, 10.1GB
64MB 100MHz ECC SDRAM DIMM
1
PCI Fast/Wide Ultra SCSI Adapter
2
IBM 10/20GB NS Internal SCSI Tape Drive
31H2Nxx
SUP072Y
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth-black
APC Smart-UPS 700
1. For a total of 128MB of system memory.
2. Includes a 16-bit SCSI Cable
Quantity
1
1
1
1
1
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 50 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault tolerance properties of larger servers. The sample configuration above consists of an IBM Netfinity 1000 IDE model with 128MB of memory and 10.1GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional internal storage expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection. This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected from power surges and outages.
59
Updated
17/10/00
IBM Netfinity 3000 Configurator
761UExx
770UExx
771UExx
780UExx
781UExx 24/10/00
790UExx -
791UExx
24/10/00
29/12/00
29/12/00
24/10/00
-
550
3
600
3
600
3
650
4
650
4
700
4
700
4
1/1
1/1
1/1
1/1
1/1
1/1
1/1
512
512
512
256
256
256
256
64/768
64/768
64/768
64/768
128/768
64/768
128/768
Tower
Tower
Tower
Tower
Tower
Tower
Tower
1/1
1/1
1/1
1/1
1/1
1/1
1/1
10/100
10/100
10/100
10/100
10/100
10/100
10/100
U
U
U
U2
U2
U2
U2
4/2
4/2
4/2
4/2
4/2
4/2
4/2
9.1/145.6 GB
0/145.6 GB
9.1/145.6 GB
0/145.6 GB
9.1/145.6 GB
0/145.6 GB
9.1/145.6 GB
2
2
2
2
40X-17X
40X-17X
40X-17X
40X-17X
40X-17X
40X-17X
40X-17X
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance
1. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
2. Standard Hard Disk Drives (HDD) are 7200 RPM. Maximum internal capacities assume replacement of standard hard disk drives with the largest supported IBM hard disk drives.
3. Intel Pentium III processor.
4. Intel Pentium III processor with advanced transfer (full speed) L2 cache.
5. Not available from IBM after this date. Business Partner inventory may be available.
6/3
6/4
6/3
6/3
6/4
6/3
6/4
DIMM Socket
DIMM Socket
DIMM Socket
Netfinity 3000 Processor Upgrades
Processor Upgrades
Part
Numbers
Upgrade
Support
1
Netfinity 600 MHz/512 KB Upgrade with Pentium III Processor 33L5106
All 71xxxxx to
76xxxxx
Netfinity 700 MHz/256 KB Upgrade with Pentium III Processor
2
10K2165 All 8xU
1. Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest FLASH BIOS, access URL http:// www.pc.ibm.com/europe/netfinity.html, then select SUPPORT. Choose a machine type then select Downloadable files and choose the category labled “BIOS”..
2. Cannot be used to upgrade models 71xxxxx through 77xxxxx.
Netfinity 3000 Memory Configurator
Total
Memory
64MB
128MB
64MB Models
64MB DIMM Standard
1 x 01K1130
128MB Models
-
128MB DIMM Standard
192MB 1 x 01K1131 1 x 01K1130
DIMM Description
64MB 100MHz ECC SDRAM DIMM
128MB 100MHz ECC SDRAM DIMM
256MB 100MHz ECC SDRAM RDIMM
1
Part Numbers
01K1130
01K1131
01K1132
1
256MB 1 x 01K1131, 1 x 01K1130 1 x 01K1131
320MB
384MB
512MB
2 x 01K1131
3 x 01K1131
2
2 x 01K1132
2
3 x 01K1132
2
1 x 01K1131, 1 x 01K1130
2 x 01K1131
2 x 01K1132
2
3 x 01K1132
2
768MB (max)
This table does not represent all possible memory configurations.
1. 256MB RDIMM P/N 01K1132 is a Registered DIMM and is not compatible with P/N 01K1130 or P/N 01K1131.
Installation of this RDIMM requires replacement of any standard DIMM.
2. Replace standard DIMM.
6/5
6/5
6/5
6/5
6/5
6/5
6/5
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
60
Updated
17/10/00
CD-ROM
Bay 2
Bay 3
Diskette
Bay 5
Bay 6
Netfinity 3000 Internal Hard Disk Drive Configurator
Total
Internal
Storage
1
Open Bay Examples
2
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8204)
18.2 GB
(P/N 00N8205)
36.4 GB
(P/N 00N8206)
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
Note: 9.1GB disk is standard in models
7x1UExx
2
3
4
-
-
1
-
2
-
-
-
-
1
-
54.6 GB
72.8 GB
91 GB
-
-
3
4
-
2
109.2 GB
145.6 GB
(max)
-
-
-
-
-
-
-
3
4
This table does not represent all possible hard drive configurations.
1. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Select a total storage row and then select the quantity of HDDs from a column corresponding to the appropriate hard disk drive. When configuring models which include a single 9.1 GB HDD, use the 9.1 GB column and order one less HDD than the table indicates.
Bay Form
Factor
Height Front
Access
Usage
1
2
3
4
133 mm
(5.25”)
133 mm
(5.25”)
1
89 mm
(3.5”)
89mm
(3.5”)
HH
HH
SL
SL yes yes yes yes
IDE CD-
ROM open open diskette
5
6
89mm
(3.5”)
89 mm
(3.5”)
SL
SL
2
2 no no
HDD on drive models open
1. A 3.5” conversion kit is standard in Bay 2 for installation of 3.5” hard disk drives.
2. Two slim-line bays can be combined to support a single half-high (HH) device.
Part
Number
Description
Ultra160 Hard Disk Drives (HDD)
00N8204 9.1GB Ultra160 SCSI HDD
00N8205 18.2GB Ultra160 SCSI HDD
00N8206 36.4GB Ultra160 SCSI HDD
External Storage Expansion Units
2
00N6xxx
4
EXP200 Storage Expansion Unit
3
1
RPM
7200
7200
7200
Height
SL
SL
SL
Form Factor
Rack (3U)
Bays
Supported
2,3,5,6
2,3,5,6
2,3,5,6
Max.
Qty.
4
4
4
37L5857
EXP200 Rack-to-Tower
Conversion Kit
3
-
37L0xxx
5
EXP200 350 W Redundant Power Supply -
1. Netfinity 3000 models P/N 771UExx and earlier contain an Ultra SCSI controller and cable which limits Ultra2 and Ultra160
HDDs to Ultra bus speeds. Netfinity 3000 models P/N 780UExx and later contain an Ultra2 SCSI controller which limits
Ultra160 HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to see Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
3. EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply and standard country power cord.
Optional hot-swap EXP200 350W Redundant Power Supply P/N 37L0xxx includes an additional standard country power cord.
To convert an EXP200 to match the system’s tower form factor, EXP200 Rack-to-Tower Conversion Kit P/N 37L5857 is required.
4. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South Africa/
English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English - Line Cords/ Publication Country Kits are included throughout.
5. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
Internal SCSI Cabling
Netfinity 3000 models 71xxxxx to 77xxxxx have a PCI Fast/Wide Ultra SCSI Adapter while models 78xxxxx and up have a PCI Wide Ultra2 SCSI Adapter. All models support up to four internal SCSI devices through the 16-bit internal connector or 15 external SCSI devices through the 16-bit external 68-pin High Density connector; however, when internal
SCSI devices are installed to the internal connector, only one SCSI device can be supported from the external connector. All models are cabled internally with a four-drop, 16-bit wide SCSI cable (models 78xxxxx and up have an Ultra2 SCSI cable), with a built-in active terminator at one end. The other end is attached to the internal 68-pin single-ended connector of the SCSI adapter. On the standard disk drive models, the hard disk drive (HDD) is attached to the cable connector closest to the active terminator. On open bay models the first disk drive installed should be attached in the same manner. In the event the standard four drop cable is attached to a RAID controller and a dedicated removable media attachment to the onboard controller is required, an optional, terminated, 16-bit cable is available (Netfinity Two-Drop Internal SCSI Cable P/N 36L9636). This is not an Ultra2 cable, therefore attached devices will operate at Ultra (or slower) speeds. If connecting narrow devices to this cable, additional 68-pin to 50-pin converters (P/N 32G3925) must be ordered. Some narrow devices include a converter in their ship group.
61
Updated
17/10/00
Netfinity 3000 I/O Options
Part
Number
Description Adapter
Length
PCI
Support
Slots
Supported
01K7364
37L6086
19K4646
02K3454
34L1501
09N9901
34L0301
34L0701
34L5001
34L5201
37L14xx
Full
Full
Half
Half
Half
Half
Half
Half
Half
Half
Half
32-bit
32/64-bit
32/64-bit
32-bit
32-bit
32-bit
32/64-bit
32-bit
32-bit
32-bit
32-bit
3
3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
Storage Controllers
1
Netfinity ServeRAID-3L Ultra2 SCSI Adapter
2
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
3
PCI Wide Ultra160 SCSI Adapter
8
PCI Fast/Wide Ultra SCSI Adapter
Networking
4
Ethernet
Netfinity 10/100 Ethernet PCI Adapter 2
10/100 Etherlink Server Adapter by 3Com
Netfinity Gigabit Ethernet SX Adapter
Token Ring
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
5
16/4 Token-Ring PCI Management Adapter
High speed 100/16/4 Token Ring PCI Management Adapter
Communications
Serial I/O SST 8, 16 and 128 Port Adapters
6
Systems Management
7
1. Netfinity 3000 models P/N 771UExx and earlier contain a single Fast/Wide Ultra SCSI Adapter. Netfinity 3000 models P/N 780UExx and later contain a PCI Wide Ultra2 SCSI controller.
2. Netfinity ServeRAID-3L Ultra2 SCSI Adapter P/N 01K7364 provides either one internal or one external LVDS SCSI channel.
3. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and 2 external (0.8mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8mm
VHDCI) providing a total of 3 external LVDS SCSI channels. Includes 32MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
4. Netfinity 3000 has an integrated 10/100 PCI Ethernet Controller.
5. The Wake on LAN function of this option is not supported by Netfinity Servers.
6. See Appendix E for details on Serial I/O options and configuration limitations.
7. Netfinity 3000 provides the following integrated system management features - Vital Product Data (VPD) plus thermal, voltage, and fan sensors. For additional functions, optional PC Server Advanced
Systems Management (P/N 94G7578) may be utilised. To enable the adapter’s Automated Restart and Alerting as well as Remote Power On/Off features, Advanced Systems Management Power Unit (P/N
94G5571) is required.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilised.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
62
Updated
17/10/00
Netfinity 3000 Power, Monitors, Accessories
Part Number Description
Power
1
Uninterruptible Power Supply (UPS)
2
SUP072Y
SUP102Y
APC Smart-UPS 700
APC Smart-UPS 1000
Monitors
T3347xx
3
31H2Nxx
3
T32N3xx
3
T274Axx
3
11AG1xx
3
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
1.Netfinity 3000 includes a 330 W voltage sensing power supply.
2. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimate.
3. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa,
CH=Switzerland, UK=UK, EU=Europe.
Netfinity 3000 Tape Options
Part Number
09N4041
00N7991
09N4042
09N4040
Description
12/24GB DDS/3 4mm Internal SCSI Tape Drive
2,4
20/40 GB DDS/4 4-mm Internal Tape Drive
3,5
10/20GB NS Internal SCSI Tape Drive
2,4
20/40GB DLT Internal SCSI Tape Drive
Bays
Supported
SCSI Interface
(bit)
2
2
2, 3
N/A
8
16 Ultra2 LVD
8
8
Form
Factor
89 mm (3.5”)
HH or 133 mm
(5.25”) HH
89 mm (3.5”)
HH or 133 mm
(5.25”) HH
89 mm (3.5”)
SL or 133 mm
(5.25”) HH
133 mm
(5.25”) FH
Termination
Included
Y
Y
Y
N
68/50-pin
ConverterIncl.
Y
N/A
Y
Y
Ext. Tape
Enclosures
10L7440
10L7440
10L7440
03K8705
9
1
10L7440
03K8705
External Tape Enclosures
External Half High SCSI Storage Enclosure
6
DLT External SCSI Enclosure
7
-
-
8/16
16
Desktop
Desktop
N
N
N
N
-
-
10K2340
00N7956
Associated Options
Media Bay Tray and LVD Cable Kit
4,8
68-pin External Multimode LVD/SE SCSI
Terminator
-
-
16 LVD/SE
16 LVD/SE
Internal
External
Y
Y
N
N
-
10L7440,
03K8705
Note: Models P/N 780UExx and above include an Ultra2 SCSI controller with a four-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to single-ended performance. Models P/N 771UExx and below include an Ultra SCSI controller with a four-drop,16-bit single-ended terminated SCSI cable. Support of LVD devices attached to this cable limits the LVD device to a maximum of Ultra SCSI bus speeds. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode
LVD SCSI cable and an external 0.8-mm VHDCI connector.
1. To determine external cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, and then refer to Appendix D:
Cables - Storage Units - Controllers.
2. This single-ended device will limit the SCSI bus of Models P/N 780UExx and above to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode LVD SCSI cable.
3. Models P/N 771UExx and below will support LVD tape drives attached to the standard cable, however, bus speeds will be restricted to Ultra SCSI or below. For LVD support, optional PCI Wide Ultra160
SCSI Adapter P/N 19K4646 may be installed (includes required terminated LVD cable).
4. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N 10K2340 is required, for attachment of the tape drive to the standard controller.
5. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N 10K2340 is required, for attachment of the tape drive to the standard controller. For LVD support, optional PCI Wide Ultra160 SCSI Adapter P/N 19K4646 may be installed (includes required terminated LVD cable).
6. Provides a black desktop 133-mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
7. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires either tape drive self termination or 68-pin External Multimode LVD/SE SCSI Terminator P/N
00N7956.
8. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
9. Requires 68-pin External Multimode LVD/SE SCSI Terminator P/N 00N7956.
NOTE: Additional tape drive information can be found in Appendix A: Tape Drive Attributes.
63
Updated
17/10/00
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Netfinity 3000 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Part Number
791UExx
00N8204
09N4042
31H2Nxx
SUP102Y
Workgroup Internet Server
Description
IBM Netfinity 3000 Pentium III 700/256KB L2, 128MB ECC, 9.1GB
IBM 9.1GB Wide Ultra160 SCSI HDD
IBM 10/20GB NS Internal SCSI Tape Drive
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth black
APC Smart-UPS 1000
Quantity
1
2
1
1
1
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an Internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (Firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider(ISP), instead of many clients like a file server does.
With this in mind, the IBM Netfinity 3000 was selected to provide an affordable price point for the growing Internet server market with Pentium III processing, 128MB of system memory (expandable to 768MB), integrated 100/10 ethernet controller, high-performance storage, and power protection with an APC Smart-UPS. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
Part Number
791UExx
00N8204
09N4042
31H2Nxx
SUP072Y
File & Print Server
Description
IBM Netfinity 3000 Pentium III 700/256KB L2, 128MB ECC, 9.1GB
IBM 9.1GB Wide Ultra160 SCSI HDD
IBM 10/20GB NS Internal SCSI Tape Drive
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
1
1
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 50 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault tolerance properties of larger servers. The sample configuration above consists of an IBM Netfinity 3000 with 128MB of memory and 18.2GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional internal storage expansion still available. Demanding network traffic is effectively handled by the standard 100Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected from power surges and outages.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
64
Updated
17/10/00
65
Updated
17/10/00
IBM Netfinity 3500 M20 Configurator
721YMxx
722YMxx
731YMxx
732YMxx
741YMxx
742YMxx
24/10/00
24/10/00
-
-
-
-
667
667
733
733
800
800
1/2
1/2
1/2
1/2
1/2
1/2
256
256
256
256
256
256
128MB(R)/2GB
128MB(R)/2GB
128MB(R)/2GB
128MB(R)/2GB
128MB(R)/2GB
128MB(R)/2GB
Tower
Tower
Tower
Tower
Tower
Tower
1/1
1/1
1/1
1/1
1/1
1/1
10/100
10/100
10/100
10/100
10/100
10/100
U160
U160
U160
U160
U160
U160
4/2
4/2
4/2
4/2
4/2
4/2
0/145.6GB
9.1/145.6GB
3
0/145.6GB
9.1/145.6GB
3
0/145.6GB
9.1/145.6GB
3
40X-17X
40X-17X
40X-17X
40X-17X
40X-17X
40X-17X
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance
1. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
2. Intel Pentium III processor with 133 MHz front-side bus (FSB).
3. Standard Hard Disk Drives (HDD) are Ultra2 7200 RPM. Maximum internal capacities assume replacement of standard hard disk drives with the largest supported IBM hard disk drives.
4. Not available from IBM after this date. Business Partner inventory may be available.
Netfinity 3500 M20 Processor Upgrades
Part Number Processor Upgrades with Full Speed Cache SMP
Support
1
Processor Speed
Upgrade
2
10K3804
10K3805
10K3817
Netfinity 667 MHz/256 KB Upgrade with 133 MHz FSB Pentium III Processor
Netfinity 733 MHz/256 KB Upgrade with 133 MHz FSB Pentium III Processor
Netfinity 800 MHz/256 KB Upgrade with 133 MHz FSB Pentium III Processor
2xY
3xY
4xY
-
2xY
All 2...3xY
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
Netfinity 3500 M20 Memory Configurator
(R) DIMM Slot 4
(R) DIMM Slot 3
(R) DIMM Slot 2
Std. (R)DIMM
(R) DIMM Slot 1
Recommended order of installation: Slot 4-3-2-1
Part Number Memory Description
1
33L3123
33L3125
33L3127
Netfinity 128 MB, 133 MHz SDRAM ECC RDIMM II
Netfinity 256 MB, 133 MHz SDRAM ECC RDIMM II
Netfinity 512 MB, 133 MHz SDRAM ECC RDIMM II
1. The recommended order of installation is in declining sequence from Slot 4 to Slot 1.
Memory size is not a factor.
Total Memory
1
128 MB
(1 x 128)
Models
256 MB
384 MB
Quantity of RDIMMs Added
128 MB
(P/N 33L3123)
256 MB
(P/N 33L3125)
512 MB
(P/N 33L3127)
1
2 or
-
1
-
-
512 MB 3 -
640 MB
896
1152 MB
1664 MB
-
-
-
-
2 or
3
-
-
1
-
2
3
4
2
2048 MB -
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory.
See operating system specifications for further information.
2. Requires removal of standard memory.
7/5
7/4
7/5
7/4
7/5
7/4
5/5
5/5
5/5
5/5
5/5
5/5
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
66
Updated
17/10/00
67
Updated
17/10/00
Netfinity 3500 M20 Internal Hard Disk Drive Configurator
Total Int.
Storage
1
Open Bay Examples
2
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8204)
18.2 GB
(P/N 00N8205)
36.4 GB
(P/N 00N8206)
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 00N8207)
18.2 GB
(P/N 00N8208)
36.4 GB
(P/N 00N8209)
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
72.8 GB
91 GB
Note: 9.1GB disk is standard in models 7x2YMxx
2 or
3
4 or
-
-
-
-
-
1
-
2 or
-
3
4 or
-
-
-
-
1
-
-
2
-
1
2 or
3
4 or
-
-
-
-
-
1
-
2 or
-
3
4 or
-
-
-
-
1
-
-
2
-
109.2 GB
145.6 GB
(max)
-
-
-
-
3
4
-
-
-
-
3
4
This table does not represent all possible hard drive configurations.
1. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Select a total storage row and then select the quantity of HDDs from a column corresponding to the appropriate hard disk drive. When configuring disk drive models P/N 7x2YMxx, which include a single
9.1GB 7200 RPM HDD, use the 9.1 GB column and order one less HDD than the table indicates.
Bay
A
B
1
C
D
E...F
G
Form Factor
133 mm (5.25”)
133 mm (5.25”)
89 mm (3.5”)
89 mm (3.5”)
89 mm (3.5”)
89 mm (3.5”)
Height
HH
HH
SL
SL
SL
SL
Front
Access
Yes
Yes
Yes
Yes
No
No
1. This bay does not support the installation of hard disk drives.
Usage
IDE CD-ROM
Open
1
Open
Diskette
Open
HDD on Drive
Models
Part
Number
Ultra160 Hard Disk Drives (HDD)
00N8204 9.1GB 7200 rpm Ultra160 SCSI HDD 7200
00N8205
18.2GB 7200 rpm Ultra160 SCSI
HDD
7200
00N8206
00N8207
36.4GB 7200 rpm Ultra160 SCSI
HDD
9.1GB 10,000 rpm Ultra160 SCSI
HDD
7200
10000
SL
SL
SL
SL
00N8208
00N8209
00N6xxx
4
37L5857
37L0xxx
5
19K11xx
6
Description
18.2GB 10,000 rpm Ultra160 SCSI
HDD
36.4GB 10,000 rpm Ultra160 SCSI
HDD
External Storage Expansion
Units
1
EXP200 Storage Expansion Unit
2
EXP200 Rack-to-Tower Conversion
Kit
EXP200 350 W Redundant Power
Supply
EXP300 Storage Expansion Unit
3
RPM
10000
10000
Form Factor
Rack (3U)
-
-
Height
SL
SL
Rack (3U)
Bays
Supported
Max.
Qty.
C,E,F,G
C,E,F,G
C,E,F,G
C,E,F,G
C,E,F,G
C,E,F,G
4
4
4
4
4
4
CD-ROM
Bay B
Bay C
Diskette
Bay E
Bay F
Bay G
09N7296
EXP300 Rack-to-Tower Conversion
Kit
-
1. No external SCSI port is available. Select an optional SCSI controller then refer to Appendix D: Cables-Storage Units-
Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable.
For HDD or other expansion unit options, see the specific expansion unit section.
2. EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply and standard country power cord. Optional hot-swap EXP200 350W Redundant Power Supply (P/N 37L0xxx) includes an additional standard country power cord. To convert an EXP200 to match the 3500 M20’s form factor, EXP200 Rack-to-Tower Conversion
Kit P/N 37L5857 is required.
3. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its own standard country power cord. To convert an EXP300 to match the 3500 M20’s form factor, EXP300 Rack-to-Tower
Conversion Kit P/N 09N7296 is required.
4. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English - Line Cords/ Publication
Country Kits are included throughout.
5. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
6.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
Internal SCSI Cabling
Netfinity 3500 M20 systems are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in active terminator at one end of the cable. The other end of the cable is attached to the internal connector of the integrated Wide Ultra160 SCSI controller. For RAID configurations, the cable can be moved from the onboard to the optional RAID controller. A tape drive can then be cabled directly to the onboard or other supported adapter with the terminated, two-drop, 16-bit, LVD SCSI cable available in the Netfinity Media
Bay Conversion Kit P/N 10K2340. No external SCSI port is included.
Netfinity 3500 M20 I/O Options
Part
Number
Description
Storage Controllers
1
19K0564 Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
2
37L6086 Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
3
02K3454 PCI Fast/Wide Ultra SCSI Adapter
37L6091 ServeRAID-4L Ultra160 SCSI Controller
4
37L6080 ServeRAID-4M Ultra160 SCSI Controller
5
19K4646 PCI Wide Ultra160 SCSI Adapter
9
Networking
7
Ethernet
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
09N9901 10/100 EtherLink Server Adapter by 3Com
34L0301 Netfinity Gigabit Ethernet SX Adapter
Token Ring
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
Communications
8
Adapter
Length
Full
Full
Half
Full
Full
Half
Half
Half
Half
Half
PCI Support
32-bit
32/64-bit
32-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32-bit
32/64-bit
32-bit
Slots
Supported
1...5
1...5
1...5
1...5
6
1...5
6
1...5
1...5
1...5
1...5
1,,,5
Exterior Connector Access
1. Netfinity 3500 M20 includes a single channel Ultra160 SCSI controller for internal use only. No standard external port is available. See “Internal SCSI Cabling” for cabling alternatives.
2. Netfinity ServeRAID-3L Ultra2 SCSI Adapter II P/N 19K0564 provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
3. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8-mm VHDCI connector) providing a total of 3 external LVDS SCSI channels. Includes 32 MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection. External connector is 0.8-mm VHDCI.
5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilised). External connectors are 0.8-mm VHDCI.
6. ServeRAID-4L P/N 37L6091 and -4M P/N37L6080 are not supported in slots 1 or 2 if more than one RAID adapter is to be installed or more than one logical drive is to be attached to the adapter.
7. Netfinity 3500 M20 includes a full-duplex, 10/100 Mbps Ethernet PCI controller.
8. Netfinity 3500 M20 includes two USB ports, one serial and one parallel port.
9. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm VHDCI connector. Only one of the two connectors may be utilised.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
68
Updated
17/10/00
69
Updated
17/10/00
Netfinity 3500 M20 Power, Monitors, Accessories
Part Number Description
Power
1
Uninterruptible Power Supply (UPS)
2
SUP072Y
SUP102Y
APC Smart-UPS 700
APC Smart-UPS 1000
SUP142Y APC Smart-UPS 1400
Monitors
3
T3347xx
4
31H2Nxx
4
T32N3xx
4
T274Axx
4
11AG1xx
4
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
1. Netfinity 3500 M20 includes a 330 W voltage sensing power supply.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Netfinity 3500 M20 uses an SVGA controller (S3 Savage4 chipset) with 8 MB of video memory.
4. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
Netfinity 3500 M20 Tape Options
Part
Number
Tape Drives Bays
Supported
2
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter
Incl.
Ext. Tape
Enclosures
09N4041
12/24 GB DDS/3 4-mm Internal SCSI Tape
Drive
2,3
09N4042 10/20 GB NS Internal SCSI Tape Drive
2,3
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
4
B
B, C
B
8
8
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
89 mm
(3.5”) SL or
133 mm
(5.25”) HH
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
Y
Y
Y
Y
Y
N/A
10L7440
10L7440
10L7440
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
5
Associated Options
8/16 Desktop N N -
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
10K2340 Media Bay Tray and LVD Cable Kit
3,4,6
16 LVD/SE External Y N 10L7440
16 LVD Internal Y N -
Note:All models include an Ultra160 SCSI controller with a five-drop multi-mode terminated LVD SCSI cable. Single-Ended devices attached to this cable will limit the entire SCSI bus to single-ended performance. All tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode terminated LVD SCSI cable and an external 0.8-mm VHDCI connector.
1
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section, and the desired enclosure, then refer to Appendix D: Cables -
Storage Units - Controllers.
2.This single-ended device will limit the SCSI bus to which it is attached to Ultra SCSI speeds. To provide a dedicated tape SCSI bus, install PCI Wide ultra160 SCSI Adapter P/N 19K4646 which includes a five-drop multi-mode LVD SCSI cable.
3. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N
10K2340 is required, for attachment of the tape drive to the standard SCSI controller.
4. For RAID configurations, where the standard SCSI cable is attached to a RAID adapter, the two-drop multi-mode terminated LVD SCSI cable included with Media BayTray and LVD Cable Kit P/N
10K2340 is required, for attachment of the tape drive to the standard SCSI controller. For LVD support, optional PCI Wide Ultra160 SCSI Adapter P/N 19K4646 may be installed (includes required terminated LVD cable).
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
6. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
Note: Additional tape information can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Netfinity 3500 M20 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number Description
732YMxx
33L3123
00N8204
09N4042
31H2Nxx
SUP072Y
1. For a total of 256 MB of system memory.
2. For a total of 27.3 GB of internal storage.
Netfinity 3500 M20 Pentium III 733 MHz/128 MB/9.1 GB
128 MB, 133 MHz SDRAM ECC RDIMM II
1
9.1 GB Wide Ultra160 SCSI HDD
2
10/20 GB NS Internal SCSI Tape Drive
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
2
1
1
1
An Internet server is a server that handles all requests from the Internet (Intranet or Extranet). Usually, this type of server has the same characteristics as a normal file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of an
Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this is mind, the IBM Netfinity 3500 M20 was selected to provide an affordable price point for the growing Internet server market with up to two-way Pentium III processing capability, 256 MB of system memory (expandable to 1 GB), and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods are used you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
File and Print Server
Part Number
731YMxx
33L3123
00N8208
00N7991
31H2Nxx
SUP072Y
1. For a total of 256 MB of system memory.
2. For a total of 54.6 GB of internal storage.
Description
Netfinity 3500 M20 Pentium III 733/128 MB/0 GB
128 MB, 133 MHz SDRAM ECC RDIMM II
1
18.2 GB 10,000 RPM Ultra160 SCSI HDD
2
20/40GB DDS/4 4mm Internal SCSI Tape Drive
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
Quantity
1
1
1
1
3
1
A small business or departmental server is usually required to perform all typical server functions while servicing up to 100 users in a normal workgroup computing environment, but doesn’t require the high-end performance and fault-tolerance properties of larger servers.
The sample configuration above consists of an IBM Netfinity 3500 M20 with 256 MB of memory and 54.6 GB of hard disk space. It has enough processor power and memory to run most current network operating systems comfortably and enough hard disk drive space to store a significant amount of data with additional external storage expansion still available.
Demanding network traffic is effectively handled by the standard 100 Mbps Ethernet connection.
This configuration also includes a tape backup unit, monitor, and a UPS to keep the system protected during power surges and outages.
Application Server
Part Number
741YMxx
Description
Netfinity 3500 M20 Pentium III 800 MHz/128 MB/0 GB
10K3817
33L3125
37L6091
10K2340
00N8207
09N4042
31H2Nxx
SUP072Y
Netfinity 800 MHz/256 KB Upgrade with 133 MHz FSB Pentium III Processor
256 MB, 133 MHz SDRAM ECC RDIMM II
10/20 GB NS Internal SCSI Tape Drive
1
Netfinity ServeRAID-4L Ultra160 SCSI Adapter
Media Bay Tray and LVD Cable Kit
2
9.1 GB 10,000 RPM Ultra 160 SCSI HDD
3
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 700
1. For a total of 384 MB of system memory.
2. Includes a cable for dedicated attachment of the tape drive to the standard controller.
3. For a total of 27.3 GB of internal storage.
Quantity
1
1
1
3
1
1
1
1
1
An application server differs from a file and print server in that it has a higher workload, in providing application serving requirements for users. With this in mind, the IBM
Netfinity 3500 M20 was selected to provide an affordable price point for an application server, with two-way Pentium III processing, 384 MB of system memory (expandable to 2
GB), and availability features such as RAID-protected internal storage and power protection with an APC Smart-UPS.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
70
Updated
17/10/00
71
Updated
17/10/00
IBM Netfinity 4000R Configurator
865341Y 24/10/00 2 x 750
2
865344Y
5
24/10/00 2 x 750
2
865345Y 24/10/00 2 x 750
2
865346Y 24/10/00 2 x 750
2
865351Y 24/10/00 1 x 650
2
865361Y 24/10/00 2 x 650
2
865362Y 24/10/00 2 x 650
2
2/2
2/2
2/2
2/2
1/2
2/2
256
256
256
256
256
256
512MB/2GB
512MB/2GB
1GB/2GB
2GB/2GB
256MB/2GB
512MB/2GB
Rack(1U)
Rack(1U)
Rack(1U)
Rack(1U)
Rack(1U)
Rack(1U)
1/1
1/1
1/1
1/1
1/1
1/1
2 x 10/100
2 x 10/100
2 x 10/100
2 x 10/100
2 x 10/100
2 x 10/100
U
U
R-U2
R-U2
U
U
1/0
1/0
1/0
1/0
1/0
1/0
18.2/36.4
4
GB
36.4/36.4
4
GB
18.2/36.4
4
GB
36.4/36.4
4
GB
9.1/36.4
4
GB
18.2/36.4
4
GB
18.2/36.4
4
GB
24X-10X
24X-10X
24X-10X
24X-10X
24X-10X
24X-10X
3/0
3/0
3/0
3/0
3/1
3/0
2/1
2/1
2/1
2/1
2/1
2/1
2/2 256 512MB/2GB Rack(1U) 1/1 2 x 10/100 R-U2 1/0 24X-10X 3/0 2/1
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. The Netfinity 4000R does not support customer installation of adapters, HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
2. Intel Pentium III processor with advanced transfer (full speed) L2 cache.
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
4. Standard Hard Disk drives (HDD) are 7200 RPM. Maximum internal capacities assume factory replacement of standard hard disk drives with the largest supported IBM hard disk drives.
5. Announced as a Business Model in Europe.
6. Not available from IBM after this date. Business Partner inventory may be available.
Note: General Availability of the Netfinity 4000R is limited to and supported in the following countries only at this time:- Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Israel,
Italy, Luxembourg, MEEP*, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, UK.
*MEEP includes: Bahrain, U.A.E, Jordan, Kuwait, Lebanon, Oman, Pakistan, Qatar, Saudi Arabia, Syria, Egypt, Iran, Iraq, Yemen.
Netfinity 4000R Processor Upgrades
Part
Number
1
N/A
Pentium II with 512KB Cache
SMP
Support
51Y
2
Netfinity 650 MHz/256 KB Upgrade with Pentium III Processor
1. The Netfinity 4000R does not support customer installation of adapters, HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
2. One additional processor can be installed, providing a maximum of two. all processors must be identical in type, speed and cache size.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
72
Updated
17/10/00
Netfinity 4000R Memory Configurator
RDIMM Socket
RDIMM Socket
RDIMM Socket
RDIMM Socket
DIMM Description
128MB 100MHz ECC SDRAM RDIMM
256MB 100MHz ECC SDRAM RDIMM
Part Numbers
N/A
1
N/A
1
N/A
1
512MB 100MHz ECC SDRAM RDIMM
1.The Netfinity 4000R does not support customer installation of adapters, HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
Netfinity 4000R Internal Hard Disk Drive Configurator
Bays Form
Factor
Height Front
Access
Usage
1
2
1
3
1
5.25”
3.5”
SL
SL yes no
IDE CD-ROM
HDD
3.5” SL no HDD
1. The Netfinity 4000R does not support customer installation of adapters,
HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory.
Contact your IBM Marketing Representative for more information
Part
Numbers
N/A
1
N/A
1
Description
9.1GB 7200rpm SCSI HDD
18.2GB 7200rpm SCSI HDD
RPM
7200
7200
Height
SL
SL
1. A maximum of two SL HDDs may be installed. The Netfinity 4000R does not support customer installation of adapters, HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information
Internal SCSI Cabling
Netfinity 4000R models (except 865345Y, 46Y and 62Y) contain a single channel Wide Ultra SCSI adapter that has two 68-pin connectors to support SCSI device attachment. Up to two Wide Ultra SCSI HDDs can be supported internally. Models 865345Y, 46Y and 62Y contain a single ServeRAID-3L RAID adapter for internal use only. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
.
Netfinity 4000R I/O Options
Part
Number
Description
Storage Controllers
2
N/A
1
N/A
1
N/A
1
N/A
1
Netfinity ServeRAID-3L Ultra2 SCSI Adapter (i channel)
PCI Fast/Wide Ultra SCSI Adapter (1 channel)
Ultra SCSI Adapter (2 channel)
Ultra2 SCSI Adapter (1 channel)
Networking
3
N/A
1
N/A
1
N/A
1
Netfinity 10/100 Ethernet PCI Adapter 2
Netfinity Gigabit Ethernet SX Adapter
16/4 Token-Ring PCI Management Adapter
1. The Netfinity 4000R does not support customer installation of adapters, HDDs, memory, processors, or any other devices that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
2. Netfinity 4000R models 865345Y, 46Y and 62Y contain a single channel ServeRAID-3L adapter for internal use only. Other models contain a single channel Wide Ultra SCSI adapter with an internal 68-pin connector supporting up to two internal HDDs.
3. Netfinity 4000R contains two integrated 10/100 PCI Ethernet controllers.
73
Updated
17/10/00
Netfinity 4000R Power, Monitors, Accessories
Part Number
94G7448
2PDUxxx
23
14RIxxx
22
30RIxxx
22
37L6862
T3347xx
19
31H2Nxx
19
T32N3xx
19
T274Axx
19
11AG1xx
19
Description
Power
1
Power Cable Type C12 (3.7m, 12 ft.)
2
Power Distribution Unit (PDU)
200-240V Power Distribution Unit
3
Uninterruptible Power Supply (UPS)
4
APC Smart-UPS 1400RMiB
5
APC Smart-UPS 3000RMiB
6
APC Smart-UPS 5000RMiB
7
Monitors
8
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
9
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
9
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
9
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
9
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
10
Rack and NetBay
11
930842P
930842X
9306900
9306910
36L9703
9306200
36L9702
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
12
Netfinity Rack (Perforated Doors)
12
Netfinity Rack Extension Kit
Netfinity NetBAY22
12
NetBAY22 Rack Extension Kit
Keyboard and Mouse
13
28L36xx
20
28L36xx
21
28L3675
Space Saver Keyboard
14, 15
Preferred Keyboard (stealth black)
16
Sleek 2-Button Stealth Black Mouse
Console Options
8,17
37L6888 Netfinity Flat Panel Monitor Rack Mount Kit
94G7445
28L0542
Console Server Selector Switch (8-port)
Netfinity Console Server Selector Switch (4-port)
Console Cable Set - 12 ft. (3.66m)
17,18
94G7447
1. Netfinity 4000R includes a single 150W power supply and a single 2.8 m (9 ft.) power cord for attachment to a high voltage UPS or PDU.
2. For attachment to a high voltage UPS or PDU.
3. Contains ten IEC 320-C13 outlets and three communication links, Supports up to 16 amps.
4. For runtimes and UPS attributes, see Appendix C: UPS Runtime Estimates.
5. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
6. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
7. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
8. An available port on a console switch is required for each Netfinity 4000R.
9. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
10. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
11. Netfinity 4000R is housed in a 19” rack mountable drawer and requires one of the racks listed here. See IBM Netfinity Rack cabinet and Options section for IBM rack supported devices. To provide adequate cooling, a blank filler panel should be placed on the front of any unused rack space. If non-IBM racks are to be used, assure that both front and rear doors offer approximately
60% open area uniformly distributed and in line with installed servers. A clearance of 51 to 64-mm (2 to 2-1/2 inches) must be maintained between the front door and the system unit’s front bezel.
The rear door must maintain the same or greater clearance. Clearance between the EIA mounting rails and rack side covers must be less than 13-mm (1/2-inch) to prevent air re-circulation from back to front. Non-rack installations are not supported.
12. Rack Extension kits 36L9703 and 36L9702 are recommended for 93069xx and 9306200 respectively, to provide sufficient room for cable management.
13. The Netfinity 4000R does not include a keyboard or mouse.
14. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
15. Advanced TrackPoint IV features are not available on IBM Netfinity sy.stems.
16. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
17. The Netfinity 4000R ships with a 4 foot console cable which should be sufficient for most customer’s needs. One end of this cable plugs into the system unit, the other end has male connectors and plugs into the Console Switch, carrying the keyboard, mouse and video signals. In exceptional circumstances, should the lon ger 12 foot Console Cable P/N 94G7447 be required, a special adapter cable has to be ordered directly from the manufacturer. This adapter cable plugs into the system unit and has female connectors for keyboard, mouse and video on the outbound end, thus enabling it to be connected to the Console Cable P/N 94G7447. This adapter cable is known as the KVM cable, it has a vendor part number of 09N7179 and requests should be sent to Julie Laws at Airspeed LLC ([email protected]) or telephone 00-1-919-644-1222.
18. Required to connect server to console switch.
19.Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
20. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland,
19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
21. Where ‘ xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=UK English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
22. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom,
EUR=Europe
23. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom,
EUR=Europe..
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
74
Updated
17/10/00
75
Updated
17/10/00
IBM Netfinity 6000R Configurator
21RYMxx
1
22RYMxx
1
-
-
700 1/4 1024 512MB(R)/16GB Rack(4U) 1/3
700 1/4 2048 512MB(R)/16GB Rack(4U) 1/3
P, S,
H,F
P, S,
H,F
S-Fans
O-Power
4
S-Fans
O-Power
4
Y 10/100 D,U160 2/0
Y 10/100 D,U160 2/0
0/218.4
GB
0/218.4
GB
40X-17X 8/6
6
40X-17X 8/6
6
6/6
6/6
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 6000R Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor with full speed ECC L2 cache and 100 MHz access to memory and I/O buses. IBM intends to make available a Netfinity 6000R model containing an Intel 800 MHz/2 MB
L2 Cache Pentium II Xeon processor when Intel makes this processor generally available to the marketplace.
3. Advanced Chipkill ECC memory corrects two-, three-, and four-bit memory errors.
4. N+1 power supply redundancy requires a minimum of one optional Netfinity 270 W Hot-Swap Redundant Power Supply P/N 37L6879. Robust configurations may require two. See “Power” under
“Netfinity 6000R Power, Monitors, Accessories” for additional information.
5. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
6. Netfinity 6000R includes three hot-swap bays. Optional Netfinity 3-Pack Ultra 160 Hot-Swap Expansion Kit P/N 33L5050 expands the total hot-swap bays to six.
Netfinity 6000R Processor Upgrades
Part Number Processor Upgrades with Full Speed Cache SMP
Support
1
Processor Speed
Upgrade
2
00N7946
00N7944
Netfinity 700 MHz/1 MB Upgrade with Pentium III Xeon Processor
Netfinity 700 MHz/2 MB Upgrade with Pentium III Xeon Processor
1RY
2RY
-
1RY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
1. Netfinity 6000R is housed in a 19” rack mountable drawer and requires one of the racks listed here. See “IBM Netfinity Rack Cabinet and Options” section for IBM rack supported devices.
2. Netfinity 6000R ships without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
6. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N
19K3831=Switzerland, 19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where ‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
76
Updated
17/10/00
77
Updated
17/10/00
Netfinity 6000R Memory Configurator
Total
Memory
1
Quantity of RDIMMs Added
2
128 MB
(P/N 33L3113)
256 MB
(P/N 33L3115)
512 MB
(P/N 33L3117)
1 GB
(P/N 33L3119)
Se t 1- J1
Set 2- J2
Set 3- J3
Set 4- J4
Set 1- J5
Set 2- J6
Set 3- J7
Set 4- J8
Std. RDIMM
Std. RDIMM
Set 1- J9
Set 2- J10
Set 3- J11
Set 4- J12
Set 1- J13
Set 2- J14
Set 3- J15
Set 4- J16
Std. RDIMM
Std. RDIMM
All RDIMMs installed in each set must be the same size, but all the sets do not have to contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from 1 to 4.
512 MB
1.0 GB
1.5 GB
2.0 GB
2.5 GB
4 x 128 RDIMMs standard
4
-
4
-
-
-
4
4
8
-
-
-
-
-
-
-
-
-
-
3.0 GB
4 GB
4
4
-
4
4
4
-
-
5 GB
6 GB
3
7 GB
3
8 GB
3
9 GB
10 GB
3
12 GB
3
14 GB
3
16 GB
3
(max)
4
-
-
-
4
-
-
-
-
-
8
4
-
-
-
-
-
-
8
8
12
16
-
12
8
4
-
-
-
-
-
8
4
8
12
16
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. To obtain the quantity of memory identified in the “Total Memory” column, select the appropriate row and order the quantity of RDIMMs identified in all columns for that row. Example: For 2.0 GB, order 4 x 33L3113 plus 4 x
33l3115.
3. Requires removal of standard RDIMMs.
Part Memory Description
1
Number
33L3113
33L3115
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
33L3117
33L3119
Netfinity 512 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 1 GB 100 MHz ECC SDRAM RDIMM
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do not have to contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from 1 to 4. Chipkill support is provided on the memory card.
Netfinity 6000R Internal Hard Disk Drive Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
18.2 GB
(P/N 37L7202)
36.4 GB
(P/N 37L7203)
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
18.2 GB
(P/N 37L7205)
36.4 GB
(P/N 37L7206)
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
72.8 GB
91 GB
109.2 GB
145.6GB
182GB
3
4
2
5
2
6
2
-
1
2
-
-
-
-
Standard on Base Models
-
1
-
2
-
-
-
1
-
1
2
3
4
2
5
2
6
2
-
-
-
-
-
Standard on Base Models
-
1
-
2
-
-
-
1
-
3
4
2
5
6
-
-
-
2
2
4
5
-
2
-
3
2
2
-
3
4
2
5
2
6
2
-
-
-
2
-
3
4
2
5
2
218.4GB
(max)
6
2
6
2
This table does not represent all possible hard drive configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. Requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050.
Bay Form Factor Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
1
Max.
Qty.
-
89 mm
(3.5”)
SL Yes Diskette
Ultra160 Hard Disk Drives (HDD)
-
1...3
4...6
2
133 mm (5.25”)
HS
HS
1. Half-high (HH) devices are NOT supported.
2. To enable Bays 4...6, optional Netfinity 3-Pack Utra160 Hot-Swap Expansion Kit
P/N 33L5050 is required.
Diskette
CD-ROM
HH
SL
1
SL
1
Bay 1
Bay 2
Bay 3
Yes
Yes
Yes
Bay 4
Bay 5
Bay 6
IDE CD-
ROM
Open
Open
To enable Bays 4...6, optional Netfinity 3-Pack Ultra160 Hot-
Swap Expansion Kit (P/N 33L5050) is required.
37L7201
37L7202
37L7203
37L7204
37L7205
37L7206
19K0655
19K0656
33L5050
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
7200
7200
7200
10,000
10,000
10,000
15000
15000
Associated Options
Netfinity 3-Pack Ultra160 Hot-Swap
Expansion Kit
2
-
SL
SL
SL
SL
SL
SL
SL
SL
3 x SL
1...6
1...6
1...6
1...6
1...6
1...6
1...6
1...6
4...6
6
1
6
1
6
1
6
1
6
1
6
1
6
1
6
1
-
00N6xxx
8
37L0xxx
9
External Storage Expansion
Units
3
EXP200 Storage Expansion Unit
4,7
EXP200 350 W Redundant Power
Supply
7
EXP300 Storage Expansion Unit
5,7
Form Factor
Rack (3U)
-
19K11xx
10
Rack (3U)
00N71xx
11
94G7448
FAStT EXP500 Storage Expansion
Unit
6,7
Rack Power Cable Type C12
(3.7m, 12 ft.)
7
Rack (3U)
-
1. Netfinity 6000R ships with bays 1...3 enabled. To enable installation of greater than three HDDs requires Netfinity 3-
Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050.
2. Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit P/N 33L5050 includes a hot-swap backplane and associated components for two cabling options. Within the option are two 16-bit LVD SCSI cables. One can be attached from the 3pack Ultra160 Hot-Swap backplane to the second connector of the dual-channel Ultra160 SCSI controller, the other, through the use of a repeater card included with the option, can be cabled directly to the standard backplane. Utilising the second channel will eliminate the possibility of attaching external devices to that channel.
3. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. EXP200 includes a single 2 M Ultra2 SCSI cable and single hot-swap 350W power supply. Optional hot-swap EXP200
350W Power Supply (P/N 37L0xxx) provides redundancy.
5. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies.
6. FAStT EXP500 Storage Expansion Unit includes dual hot-swap 350W power supplies.
7. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
8. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
9. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English, 079=Italy/
English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
10.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
11. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
Internal SCSI Cabling
The Netfinity 6000R contains a DASD backplane supporting three hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal connectors of the integrated dual-channel Ultra160 SCSI controller through a 16-bit LVD SCSI cable. An optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
(P/N 33L5050) can be installed to provide additional internal HDD storage capacity. Within this option are two 16-bit LVD SCSI cables. One can be attached from the 3-Pack Ultra
Hot-Swap backplane to the second connector of the dual-channel Ultra160 SCSI controller, the other, through the use of a repeater card included with the option, can be cabled directly to the standard backplane.
In configurations where external SCSI device attachment is required instead of additional internal HDD storage, a second 16-bit LVD SCSI cable is included with the server. One end of the cable can be attached to the second Ultra160 connector and the other is attached to the external 0.8-mm VHDCI connector on the back of the chassis. This provides an external connection to support LVDS devices.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
78
Updated
17/10/00
79
Updated
17/10/00
Netfinity 6000R I/O Options
Part
Number
Description
Storage Controllers
3
19K0564 Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
5
37L6086 Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
6
37L6091 Netfinity ServeRAID-4L Ultra160 SCSI Controller
7
37L6080 Netfinity ServeRAID-4M Ultra160 SCSI Controller
8
37L6889 Netfinity ServeRAID-4H Ultra160 SCSI Controller
9
02K3454 PCI Fast/Wide Ultra SCSI Adapter
19K4646 PCI Wide Ultra160 SCSI Adapter
10
Fibre Storage Controller and Options
11
00N6881 Netfinity FAStT Host Adapter
19K11xx
22
FAStT200 Storage Server
19K11xx
23
FAStT200 HA Storage Server
19K1121 FAStT200 Redundant RAID Controller
Networking
12
Adapter
Length
Full
Full
Full
Full
Full
Half
Half
Half
-
-
-
PCI
Support
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
32/64-bit
-
-
-
Slots
Supported
1, 5...6
1, 5...6
1...6
4
1...6
4
1...6
4
1, 5...6
1...6
1...6
-
-
-
1
Hot-
Plug
X
-
-
X
X
X
X
-
-
X
-
2
PCI Voltage
Key
5
5
Universal
Universal
Universal
5
Universal
Universal
-
-
-
MHz
-
-
66
-
Ethernet
09N9901 Netfinity 10/100 EtherLink Server Adapter by 3Com
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
34L0301 Netfinity Gigabit Ethernet SX Adapter
Half
Half
Half
32-bit
32-bit
32/64-bit
1...6
4
1...6
4
1...6
4
X
X
X
Universal
Universal
Universal
33
33
33
Token Ring
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
13
Communications
14
37L14xx Serial I/O SST 8, 16, and 128 port adapters
15
Systems Management
16
36L96xx
21
36L9654
Netfinity Advanced System Management PCI Adapter
17, 18
03K9309 Netfinity Advanced System Management Interconnect Cable Kit
19
Netfinity Advanced System Management Token-RIng Connection
20
Half
Half
Full
-
-
32-bit
32-bit
32-bit
-
-
1...6
4
1, 5...6
1, 5...6
-
-
18
X
-
-
-
-
Universal
5
5
-
-
33
33
33
-
-
1.The 5 V - 33 MHz slots support Universal or 5 V adapters. A universal voltage-66 MHz adapter plugged into these slots will operate at 33 MHz.The 3.3 V slots support universal or 3.3 V adapters. A universal voltage-33 MHz adapter plugged into these slots limits a 66 MHz PCI adapter installed on the same bus to 33 MHz.
2. All 6 slots are full length hot-plug capable using IBM’s Active PCI technology. For Network Operating System support access URL www.ibm.com/pc/us/compat
3. Netfinity 6000R includes a dual-port, dual-channel Ultra160 SCSI controller. See “Internal SCSI Cabling” for cabling alternatives.
4. Installation of a 33 MHz adapter into a Bus B 66 MHz slot will slow operation of all Bus B slots to 33 MHz.
5. Netfinity ServeRAID-3L Ultra2 SCSI Adapter II (P/N 19K0564) provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
6. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8mm VHDCI) providing a total of 3 external LVDS SCSI channels. Includes 32MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
7. Netfinity ServeRAID-4L Ultra160 SCSI controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and either one internal or one external Ultra160 connection. External connector is 0.8-mm VHDCI.
8. Netfinity ServeRAID-4M Ultra160 SCSI controller is powered by a 100MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8-mm VHDCI.
9. Netfinity ServeRAID-4H Ultra160 SCSI controller is powered by a 266MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8-mm VHDCI.
10. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8mm VHDCI connector. Only one of the two connectors may be utilised.
11. See Fibre Array Solutions section for additional configuration information.
12. Netfinity 6000R has an integrated 10/100 PCI Ethernet Controller.
13. The Wake on LAN function of this option is not supported by Netfinity servers.
14. Netfinity 6000R includes two USB ports, two serial and one parallel port.
15. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416) may be installed.
16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 6000R works with Netfinity Director to provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter P/N 36L96xx and Netfinity Advanced System Management Interconnect Cable Kit P/N 03K9309 additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter which requires a separate power source. Provides an integrated 10/100
Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection P/N 36L9654.
18. A maximum quantity of one is supported.
19. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1xX to 4xX are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
20. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable which is routed to an available adapter slot opening (reduces available slots by one). The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System
Management Token-Ring Connection cannot be connected or used together.
21. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
22.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English 31=South
Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
23.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South
Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
33
33
66
33
33
33
33
Exterior Connector Access
Netfinity 6000R Power, Monitors, Accessories
Part Number Description
Power
1,9
37L6879
94G7448
270 W Hot-Swap Redundant Power Supply
2,9
Rack Power Cable Type C12 (3.7m, 12 ft.)
9
Uninterruptible Power Supply (UPS)
3
14RIxxx
11
30RIxxx
11
APC Smart-UPS 1400RMB
APC Smart-UPS 3000RMB
4
4
37L6862 APC Smart-UPS 5000RMB
5
Monitors
6
T3347xx
10
31H2Nxx
10
T32N3xx
10
T274Axx
10
11AG1xx
10
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
7
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
7
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image
Size), stealth black
7
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image
Size), stealth black
7
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0”
Viewable), stealth black
8
Part Number
930842P
930842X
9306900
9306910
36L9703
9306200
36L9702
37L6888
94G7448
28L36xx
6
28L36xx
7
Description
Rack and NetBAY
1,8
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated front door)
Netfinity Rack Extension Kit
Netfinity NetBAY22
Netfinity NetBAY22 Rack Extension Kit
Netfinity Flat Panel Monitor Rack Mount Kit
Rack Power Cable Type C12 (3.7m)
8
Keyboard and Mouse
Space Saver II Keyboard
3, 4
Preferred Keyboard (stealth black)
5
2
28L3675 Sleek 2-Button Stealth Black Mouse
1. Netfinity 6000R systems include a single 270 W, hot-swap power supply. N+1 power supply redundancy may be achieved with the addition of optional 270 W Hot-Swap Redundant
Power Supply P/N 37L6879. Redundancy for configurations of greater than 270 W requires installation of a second optional supply. To assist in determining when an additional power supply is required to preserve redundancy, a “Non-Redundant LED” is a standard feature of the
Netfinity 6000R. The following table is provided as a reference.
Number of Power
Supplies
1
System Configuration Supported
Non-Redundant
Up to two processors
Up to three PCI adapters
Up to three HDDs
Up to eight memory RDIMMs
1. Netfinity 6000R is housed in a 19” rack mountable drawer and requires one of the racks listed here. See
“IBM Netfinity Rack Cabinet and Options” section for IBM rack supported devices.
2. Netfinity 6000R ships without a keyboard or mouse.
3. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
4. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
5. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
6. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian,
50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/Finland,
19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
7. Where ‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English,
31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
8. The Netfinity 6000R ships with a standard country power cord. For connection to a high voltage UPS or
PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
2. Netfinity 270 W Hot-Swap Redundant Power Supply P/N 37L6879 includes a single standard country power cord.
3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
4. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
5. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
6. Netfinity 6000R uses an SVGA controller (S3 Savage4 chipset) with 8 MB of video memory.
7. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
8. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit
P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
9. Rack Power Cable P/N 94G7448 (type C12 - one for each power supply), must be ordered for power connection to a high voltage UPS or PDU.
10. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy,
SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
11. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark,
ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
80
Updated
17/10/00
81
Updated
17/10/00
Netfinity 6000R Tape Options
Part
Number
Tape Drives
01K1325 20/40GB 8-mm Internal SCSI Tape Drive
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
09N4040 20/40 GB DLT Internal SCSI Tape Drive
00N7990 40/80 GB DLT Internal SCSI Tape Drive
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
Bays
Supported
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
SCSI
Interface
(bit)
16
16 Ultra2
LVD
8
16 Ultra2
LVD
16 Ultra2
LVD
Form Factor
133 mm (5.25”) HH
89 mm (3.5”) HH or
133 mm (5.25”) HH
133 mm (5.25”) FH
133 mm (5.25”) FH
133 mm (5.25”) HH
Termination
Included
N
Y
N
N
N
68/50-pin
Converter
Incl.
N
N/A
Y
N/A
N/A
Ext. Tape
Enclosures
03K8756
03K8756
2
03K8756
03K8756
2
03K8756
2
Tape Autoloaders
00N7992 120/240GB DDS/4 Tape Autoloader N/A
1
16 Ultra2
LVD
133 mm (5.25”) FH N N/A 03K8756
2
00N79xx
7
External Tape Libraries
3
DLT Tape Library
External Tape Enclosures
03K8756 NetMEDIA Storage Expansion Unit EL
4
10L7113 NetMEDIA Systems Management Adapter
5
-
-
-
16
16
16 LVD
Rack
Rack
-
Y
Y
N
N/A
N
N
-
-
03K8756
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2,6
16 LVD Int.
Y N -
1. Netfinity 6000R does not support internal tape drives. An external tape or tape enclosure must be used. If not used internally, the second integrated Ultra160 connector may be routed to an external 0.8mm VHDCI connector with a cable included with the server. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which has an external 0.8-mm VHDCI connector. Select tape drive, enclosure and supported adapter then use Appendix D: Cables-Storage Units-Controllers to select an appropriate external cable.
2.LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop mult-mode terminated cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack-mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm (5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
5. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
6. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
7 . Where ‘xx’ represents a country specific power cord code: Rack versions - 81=EU1,82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
NOTE: Additional tape drive information can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
Netfinity 6000R Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Internet Server
Part Number Description
21RYMxx
19K0564
33L5050
37L7201
01K1325
03K8756
03K9310
31H2Nxx
14RIxxx
Netfinity 6000R 700/1 MB Xeon, 512 MB(R) ECC, Open, 40X, PCI (Rack 4U)
Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
1
20/40 GB 8-mm Internal SCSI Tape Drive
NetMEDIA Storage Expansion Unit EL
Netfinity 2 M Ultra2 SCSI Cable
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
Industry Standard 19” Rack, EIA-310D, min. depth of 28” (711 mm)
9306200
28L36xx
Netfinity NetBAY22
Space Saver II Keyboard
94G6670 Blank Filler Panel Kit
1. For a total of 18.2 GB of RAID protected, hot-swap, hot-spare internal storage.
Quantity
1
1
1
1
1
4
1
1
1
1
1
2
An Internet server is a server that handles all requests from the Internet (intranet or extranet). Usually, this type of server has the same characteristics as a file server. The main difference is that an internet server talks a different language (TCP/IP vs. NETBEUI or IPX/SPX) and often needs to do an extra security check (firewall). In the case of an Internet server, the server itself talks mostly to just one client, the Internet Service Provider (ISP), instead of many clients like a file server does.
With this in mind, the IBM Netfinity 6000R was selected to provide an affordable price point for the growing internet server market, 512 MB of system memory (expandable to 16
GB), and availability features such as RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
The network configuration depends on the method that will be used to connect the server to the Internet. Usually fast Ethernet routers are used, but if other methods are used, you can add the appropriate adapter. The configuration includes a tape backup unit for secure backup of critical data in the event of a system or storage failure.
Application Server
Part Number Description
22RYMxx
00N7944
33L3113
33L3115
33L5050
37L7203
37L6086
00N7990
03K8756
10L7113
03K9310
31H2Nxx
14RIxxx
37L6879
Netfinity 6000R 700/2 MB Xeon, 512 MB(R) ECC, Open, 40X, PCI (Rack 4U)
Netfinity 700 MHz/2 MB Upgrade with Pentium III Xeon Processor
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
1
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
1
Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
36.4 GB Ultra160 SCSI Hot-Swap SL HDD
2
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
40/80 GB DLT Internal SCSI Tape Drive
NetMEDIA Storage Expansion Unit EL
NetMEDIA Systems Management Adapter
Netfinity 2 M Ultra2 SCSI Cable
E54 Color Monitor 15” (350 mm, 13.8” Viewable Image Size), stealth black
APC Smart-UPS 1400RMB
Netfinity 270 W Hot-Swap Redundant Power Supply
Industry Standard 19” Rack, EIA-310D, min. depth of 28” (711 mm)
9306200
28L36xx
Netfinity NetBAY22
Space Saver II Keyboard
94G6670 Blank Filler Panel Kit
1. For a total of 2 GB of system memory.
2. For a total of 109.2 GB usable RAID 5 storage.
Quantity
1
1
2
1
1
1
1
4
1
4
1
1
3
4
1
1
2
An application server is designed to handle a high workload while providing application serving requirements for users. With this in mind, the IBM Netfinity 6000R was selected to provide an affordable price point for an application server, with four-way Pentium III Xeon processing, 2 GB of system memory (expandable to 16 GB), and availability features such as battery-backed cache RAID protected internal hot-swap storage and power protection with an APC Smart-UPS.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
82
Updated
17/10/00
83
Updated
17/10/00
IBM Netfinity 7100 Configurator
611YExx 24/10/00 550 1/4 512
61RYExx
1
24/10/00 550 1/4 512
62RYExx
1
24/10/00 550 1/4 1024 256MB(R)/16GB Rack(8U) 2/4 P, H,F
63RYMxx
1
64RYMxx
1
256MB(R)/16GB
256MB(R)/16GB Rack(8U) 2/4 P, H,F
621YExx 24/10/00 550 1/4 1024 256MB(R)/16GB
631YMxx
641YMxx
-
-
-
-
700 1/4 1024 256MB(R)/16GB
700 1/4 1024 256MB(R)/16GB Rack(8U) 2/4 P, H,F
700 1/4 2048 256MB(R)/16GB
Tower
Tower
Tower
Tower
2/4 P, H,F
2/4 P, H,F
2/4 P, H,F
2/4 P, H,F
700 1/4 2048 256MB(R)/16GB Rack(8U) 2/4 P, H,F
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
S-Fans
S-Power
Y 10/100 D,U2
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
4/2 0/364GB 40X-17X 14/12 6/6
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 7100 Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor with advanced transfer (full speed) L2 cache and 100 MHz access to memory and I/O buses.
3. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
4. Not available from IBM after this date. Business Partner inventory may be available.
Netfinity 7100 Processor Upgrades
Part Number Processor Upgrades with Full Speed Cache SMP
Support
1
Processor Speed
Upgrade
2
33L5056
33L5057
10K2331
Netfinity 550 MHz/512 KB Upgrade II with Pentium III Xeon Processor
Netfinity 550 MHz/1 MB Upgrade II with Pentium III Xeon Processor
Netfinity 700 MHz/1 MB Upgrade II with Pentium III Xeon Processor
1xY
2xY
3xY
-
All 1xY
All 1...2xY
10K2332 Netfinity 700 MHz/2 MB Upgrade II with Pentium III Xeon Processor 4xY All 1...3xY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
84
Updated
17/10/00
85
Updated
17/10/00
Netfinity 7100 Memory Configurator
Total
Memory
1
Quantity of RDIMMs Added
2
64 MB
(P/N 33L3067)
128 MB
(P/N 33L3113)
256 MB
(P/N 33L3115)
512 MB
(P/N 33L3117)
1 GB
(P/N 33L3119)
Se t 1- J1
Set 2- J2
Set 3- J3
Set 4- J4
Set 1- J5
Set 2- J6
Set 3- J7
Set 4- J8
Std. RDIMM
Std. RDIMM
Set 1- J9
Set 2- J10
Set 3- J11
Set 4- J12
Set 1- J13
Set 2- J14
Set 3- J15
Set 4- J16
Std. RDIMM
Std. RDIMM
All RDIMMs installed in each set must be the same size, but all the sets do not have to contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from 1 to 4.
256 MB
512 MB
768 MB
1.0 GB
1.2 GB
1.7 GB
2.0 GB
2.7 GB
3.0 GB
3.2 GB
3.7 GB
4 GB
3
5 GB
3
6 GB
3
7 GB
3
8 GB
3
9 GB
3
10 GB
3
12 GB
3
14 GB
3
16 GB
3
(max)
-
-
-
-
-
-
-
-
4 x 64 RDIMMs
Standard
4
-
4
-
-
4
-
-
-
-
4
-
-
4
8
-
4
4
-
-
4
4
-
4
4
-
-
-
-
-
-
-
-
-
4
4
12
-
-
4
4
4
4
-
-
-
4
-
-
-
-
8
4
-
-
4
4
4
4
4
4
-
-
-
-
-
-
8
12
8
8
12
16
4
-
-
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. To obtain the quantity of memory identified in the “Total Memory” column, select the appropriate row and order the quantity of RDIMMs identified in all columns for that row. Example: For 1.0 GB, order 4 x 33L3067 and 4 x 33L3113.
3. Requires removal of standard memory DIMMs.
Part Memory Description
1
Upgrade
Number 10K2169
Compatible
2
33L3067
33L3113
Netfinity 64 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
-
X
33L3115
33L3117
33L3119
10K2169
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 512 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 1 GB 100 MHz ECC SDRAM RDIMM
3
Netfinity Active PCI/Chipkill Upgrade Kit
3
X
X
X
X
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do not have to contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from 1 to 4.
2. Memory designated by an “X” may be used with NetfinityActive PCI/Chipkill Upgrade Kit P/N 10K2169.
3. Netfinity Active PCI/Chipkill Upgrade Kit P/N 10K2169 provides an upgrade to hot-swap PCI slots and “Chipkill” ECC memory.
-
-
-
-
-
-
-
-
-
-
-
-
4
4
8
12
16
-
-
-
Netfinity 7100 Internal Hard Disk Drive Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
2
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
2
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
63.7GB
72.8 GB
81.9GB
91 GB
109.2 GB
127.4GB
145.6GB
163.8GB
182GB
7 -
8 4
9 -
2
-
3
10
-
-
-
-
-
218.4GB
-
254.8GB -
291.2 GB -
3
4
5
6
1
2
Standard on Base Models
-
1
-
-
-
-
-
-
-
1
-
-
5
6
7
8 4
9 -
10 5
-
3
-
-
2
-
6
7
8
1
2
3
4
5
6
8
9
10
-
-
-
-
-
-
-
-
Standard on Base Models
-
1
-
2
-
3
4
-
5
6
7
8
9
10
-
-
-
-
1
-
-
-
-
-
3
-
-
2
-
327.6 GB
364 GB (max)
-
-
-
-
9
10
-
-
-
-
9
10
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Netfinity 7100 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
4
-
5
6
7
8
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
86
Updated
17/10/00
87
Updated
17/10/00
Bay
-
-
RM 1
RM 2
Form
Factor
89 mm
(3.5”)
133 mm
(5.25”)
133 mm
(5.25”)
133 mm
(5.25”)
Height
SL
HH
HH
1
HH
1
Front
Access
Yes
Yes
Yes
Yes
Usage
Diskette
IDE CD-
ROM
Open
Open
Part
Number
37L7201
37L7202
37L7203
Description
Ultra160 Hard Disk Drives (HDD)
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap
SL HDD
36.4 GB Ultra160 SCSI Hot-Swap
SL HDD
RPM
7200
7200
7200
Height
SL
SL
SL
1
Bays
Supported
See diagram
See diagram
See diagram
Max.
Qty.
10
10
10
1...10 or
1...7
HS SL or HH
2
Yes Open 37L7204
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000 SL See diagram 10
NB3
3
Diskette
Bay 1
Bay 2
19” Rack
1. Two half-high (HH) bays can be combined to support a single full-high
(FH) device drive can be installed in the same group. For clarity, the SCSI IDs are identified.
3. Tower configured systems support installation of up to 3 NetBAY3s. See
IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
Removable
Media (RM)
Bays
CD-ROM
5
9
SL
0
1
3
4
10
11
13
14
3U
2
4
8
10
12
14
Open
2. The top bay is HH; all others are configured in groups of 3 SL bays. When a HH drive is installed in one of these groups, only another HH or a single SL
HH
0
Yes
Netfinity NetBAY3 (NB3)
(Optional on Tower Configurations)
Hot-Swap (HS)
Bays 10 x SL
-or-
7 x HH
(SCSI IDs
shown)
1. The top bay is HH; all others are configured in groups of three SL bays.
When a HH drive is installed in one of these groups, only another HH or a single SL drive can be installed in the same group. For clarity, the SCSI IDs are identified.
37L7205
37L7206
19K0655
19K0656
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
External Storage Expansion
Units
2
10,000
10,000
15,000
15,000
SL
SL
SL
SL
See diagram
See diagram
See diagram
See diagram
10
10
10
10
Form
Factor
00N6xxx
37L5857
37L0xxx
7
8
Netfinity EXP200 Storage
Expansion Unit
3, 6
Netfinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant
Power Supply
6
Rack
(3U)
-
-
19K11xx
9
EXP300 Storage Expansion Unit
4, 6
Rack
(3U)
09N7296
00N71xx
10
94G7448
EXP300 Rack-to-Tower Conversion
Kit
FAStT EXP500 Storage Expansion
Unit
5, 6
Rack Power Cable Type C12
(3.7m, 12 ft.)
6
-
Rack
(3U)
-
1. Netfinity 7100 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
3. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350 W power supply. Optional hotswap Netfinity EXP200 350W Power Supply (P/N 37L0xxx) provides redundancy. To convert an EXP200 to a tower form factor, Netfinity EXP200 Rack-to-Tower Conversion Kit (P/N 37L5857) is required.
4. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500 W power supplies. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit P/N 09N7296 is required.
5. FAStT EXP500 Storage Expansion Unit includes dual hot-swap 350 W power supplies.
6. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
7. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
8. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
9.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
10. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
Internal SCSI Cabling
The Netfinity 7100 contains a DASD backplane supporting ten hot-swap, SCA-2 compliant drive bays. The backplane is connected to Channel B of the integrated dual-channel,
Wide Ultra2 SCSI controller through a 16-bit LVD SCSI cable. Channel A only supports external SCSI attachment and is cabled directly to the external 0.8mm VHDCI SCSI connector. To support devices in the internal 133/89-mm (5.25/3.5-inch) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated terminator is included with the server.
This cable can be used to connect to an optional SCSI adapter or, in the case of RAID configurations where the backplane cable is attached to an optional RAID adapter, it can be connected to the Channel B connector.
Netfinity 7100 I/O Options
Part
Number
Description Adapter
Length
PCI Support Slots
Supported
1
Hot-
Plug
2
PCI
Voltage
Key
MHz
Storage Controllers
3
01K7364 Netfinity ServeRAID-3L Ultra2 SCSI Adapter
4
37L6086 Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
5
37L6091 Netfinity ServeRAID-4L Ultra160 SCSI Controller
6
37L6080 Netfinity ServeRAID-4M Ultra160 SCSI Controller
7
37L6889 Netfinity ServeRAID-4H Ultra160 SCSI Controller
8
19K4646 PCI Wide Ultra160 SCSI Adapter
18
02K3454 PCI Fast/Wide Ultra SCSI Adapter
Fibre Storage Controller
9
00N6881 Netfinity FAStT Host Adapter
19K11xx
22
FAStT200 Storage Server
19K11xx
23
FAStT200 HA Storage Server
19K1121 FAStT200 Redundant RAID Controller
Networking
10
Ethernet
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
34L0301 Netfinity Gigabit Ethernet SX Adapter
Full
Full
Full
Full
Full
Half
Half
Half
-
-
-
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
32/64-bit
-
-
-
3...6
3...6
1...6
1...6
1...6
1...6
3...6
1...6
-
-
-
X
X
X
-
-
X
X
X
-
-
-
5
5
Universal
Universal
Universal
Universal
5
Universal
-
-
-
66
-
-
-
Half
Half
32-bit
32/64-bit
1...6
1...6
X
X
Universal
Universal
33
33
Token Ring
34L5001 16/4 Token-Ring PCI Management Adapter
11
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
11
34L5201 High speed 100/16/4 Token Ring PCI Management Adapter
Communications
12
Systems Management
13
36L96xx
21
Netfinity Advanced System Management PCI Adapter
14,15
03K9309 Netfinity Advanced System Management Interconnect Cable Kit
16
36L9654 Netfinity Advanced System Management Token-Ring Connection
17
Host Attach
10L7368 Netfinity ESCON Adapter
19,20
Half
Half
Half
Full
-
-
Full
32-bit
32-bit
32-bit
32-bit
-
-
32-bit
1...6
1...6
1...6
3...6
15
-
-
3...6
20
-
-
-
X
X
X
-
Universal
Universal
Universal
5
-
-
5
33
-
-
33
33
33
33
Other
10K2169 Netfinity Active PCI/Chipkill Upgrade Kit
2
3...6
X -
1.The 5 V slots support Universal or 5 V adapters. The 3.3 V slots support 3.3 V adapters. A Universal Keyed 66 MHz adapter plugged into a 33 MHz slot will operate at 33 MHz. A Universal Keyed 33 MHz adapter plugged into a 66 MHz slot limits other adapters installed on the same bus to 33 MHz.
2. Netfinity 7100 does not ship with hot-plug PCI slots. The addition of optional Netfinity Active PCI/Chipkill Upgrade Kit P/N 10K2169 provides slots 3-6 with hot-plug capability using IBM’s Active PCI technology. For Network Operating System support access URL www.ibm.com/pc/us/compat
3.Netfinity 7100 includes a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller with one internal connector and one external port with a 0.8-mm Very High Density Connection Interface (VHDCI).
4. Netfinity ServeRAID-3L Ultra2 SCSI Adapter P/N 01K7364 provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
5. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8mm VHDCI connector) providing a total of 3 external LVDS SCSI channels. Includes 32MB of mirrored battery-backup cache which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
6. Netfinity ServeRAID-4L Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides a single channel, 16 MB of ECC cache and one internal or one external Ultra160 connection.
External connectors are 0.8-mm VHDCI.
7. Netfinity ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external
Ultra160 connectors (only two connectors may be utilised). External connectors are 0.8-mm VHDCI.
8. Netfinity ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external Ultra160 connectors (only four connectors may be utilised). External connectors are 0.8-mm VHDCI.
9. See Netfinity Fibre Array Solutions section for additional configuration information.
10. Netfinity 7100 includes a full-duplex, 10/100 Mbps Ethernet PCI Controller.
11. The Wake on LAN function of this option is not supported by Netfinity servers.
12. Netfinity 7100 includes two USB ports, two high-speed serial/asynchronous ports, (NS16550A compatible), and one high-speed (up to 2 MB/sec. data transfer speed) bi-directional parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
13. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 7100 works with Netfinity Director to provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter P/N 36L96xx and Netfinity Advanced System Management Interconnect Cable Kit P/N 03K9309 additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
14. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter which requires a separate power source. Provides an integrated 10/100
Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection P/N 36L9654.
15. A maximum quantity of one is supported.
16. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that is to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1xX...4xX are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
17. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter), and a PC Card to 9-pin D-Shell cable which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together. To download the latest firmware access URL www.pc.ibm.com/us/netfinity. Select “Server Support”, “Family”, “Model”, “Downloadable files”, and finally “Advanced Systems
Management”.
18. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilised.
19. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
20. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single server.
21. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
22.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English 31=South
Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
23.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South
Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
33
33
33
33
33
66
33
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
88
Updated
17/10/00
89
Updated
17/10/00
Slot 1- Bus A- 66 MHz- 3.3 V or Universal
Slot 2- Bus A- 66 MHz- 3.3 V or Universal
Slot 3- Bus B- 33 MHz- 5 V or Universal
Slot 4- Bus B- 33 MHz- 5 V or Universal
Slot 5- Bus B- 33 MHz- 5 V or Universal
Slot 6- Bus B- 33 MHz- 5 V or Universal
All Slots- Full Length, 64-bit
Netfinity 7100 Power, Monitors, Accessories
Part Number
33L37xx
10
94G7448
Description
Power
1,9
250 W Hot-Swap Redundant Power Supply
9
Rack Power Cable Type C12 (3.7m, 12 ft.)
9
Uninterruptable Power Supply (UPS)
2
SUP102Y
SUP142Y
14RIxxx
12
30RIxxx
12
37L6862
T3347xx
11
31H2Nxx
11
T32N3xx
11
T274Axx
11
11AG1xx
11
APC Smart-UPS 1000
APC Smart-UPS 1400
APC Smart-UPS 1400RMB
3
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
6
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
6
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image
Size), stealth black
6
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image
Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0”
Viewable), stealth black
7
1. Netfinity 7100 includes two 250W hot-swap redundant power supplies, with the ability to accept up to two additional 250 W Hot-Swap Redundant Power Supplies P/N 33L37xx. To assist in determining when an additional power supply is required to preserve redundancy, a
“Non-Redundant LED” is a standard feature of the Netfinity 7100. Predicting whether or not a particular configuration will require an additional power supply for redundancy is very complex. However, once the system is installed, the “Non-Redundant LED” will indicate when an additional power supply is required. The following sample configuration is provided as a reference.
Power Supply Quan.
2
System Configuration Supported
Typical Non-Redundant Configuration
2 x Processors
3 x PCI Adapters
4 x Half-High or 5 Slim-Line HDDs
8 x 512 MB RDIMMs
Typical Redundant Configuration
3
4
8
4 x Processors
6 x PCI Adapters
7 x Half-High or 10 Slim-Line HDDs
16 x 512 MB RDIMMs
Full Configuration with Redundancy
Part Number
37L6860
37L6859
930842P
930842X
9306900
9306910
9306200
10L6912
10L6913
37L6888
94G7448
Netfinity Caster Set
Description
Conversion Kits
8Ux24D Rack-to-Tower Kit
1
8Ux24D Tower-to-Rack Kit
Rack and NetBAY
2,10
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated door)
Netfinity NetBAY22
Netfinity NetBAY3
3
Netfinity Flat Panel Monitor Rack Mount Kit
Rack Power Cable Type C12 (3.7m)
10
Keyboard and Mouse
4
28L36xx
8
Space Saver II Keyboard
5, 7
28L36xx
9
28L3675
Preferred Keyboard (stealth black)
6
Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3 with casters.
2. Netfinity 7100 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. Tower models require Netfinity 8Ux24D Tower-to-Rack Kit P/N 37L6859 for installation in a rack.
3. Netfinity 7100 tower models require Netfinity 8Ux24D Rack-to-Tower Kit P/N 37L6860 for use with a
NetBAY3. A maximum of three NetBAY3 enclosures, including the one which ships with the conversion kit, may be stacked beneath a supported Netfinity tower server. Optional NetBAY3s must be shipped separately and not while attached to the base configuration. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
4. Tower models includes both a mouse and keyboard. Rack models include neither.
5. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
6. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
7. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
8. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian,
50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/Finland,
19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia, 19K3837=Poland.
9. Where ‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English,
31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
10. The Netfinity 7100 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. Netfinity 7100 uses an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit P/N
37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. The addition of a DLT tape drive may require a fourth power supply to preserve redundancy.
9. Rack Power Cable P/N 94G7448 (type C12) - one for each Power Supply, must be ordered for power connection to a high voltage UPS or PDU.
10. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark,
63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
11. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy,
SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
12. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark,
ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe
Netfinity 7100 Tape Options
Part
Number
Tape Drives
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
1
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
1
00N7990 40/80 GB DLT Internal SCSI Tape Drive
1
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
1
00N79xx
10
Tape Autoloaders
DLT Tape Autoloader
00N7992 120/240GB DDS/4 Tape Autoloader
1
External Tape Libraries
4
00N79xx
11
DLT Tape Library
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
5
03K8705 DLT External SCSI Enclosure
6
03K8756 NetMEDIA Storage Expansion Unit EL
7
10L7113 NetMEDIA Systems Management Adapter
8
Associated Options
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
10K2340 Media BayTray and LVD Cable Kit
2,9
Note: Netfinity 7100 includes an external 0.8-mm VHDCI connector.
Bays
Supported
1, 2
1, 2
1/2
1, 2
N/A
1/2
-
-
-
-
-
-
SCSI
Interface
(bit)
Form
Factor
16 Ultra2 LVD
16
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”)HH
133 mm
(5.25”) HH
133-mm
(5.25”) FH
133 mm
(5.25”) HH
16
16 Ultra2 LVD
Desktop
133 mm
(5.25”) FH
16
8/16
16
16
16 LVD
16 LVD/SE
16 LVD
Desktop or
Rack
Desktop
Desktop
Rack
-
Ext.
Int.
Termination
Included
Y
N
N
N
Y
N
Y
Y
Y
N
N
Y
N
68/50-pin
Converter Incl.
N/A
N/A
N/A
N/A
N/A
N/A
-
N
N
N
N
N
N
Ext. Tape
Enclosures
10L7440,
03K8756
2
10L7440
3
,
03K8756
03K8705
3
03K8756
2
10L7440
03K8756
3
2
,
-
03K8756
2
-
-
-
-
03K8756
10L7440,
03K8705
-
1
1. Non-RAID Configurations require PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which contains a five-drop multi-mode terminated LVD SCSI cable. RAID configurations where the hot-swap backplane is cabled to a RAID controller, utilise the included two-drop multi-mode terminated LVD SCSI cable ito attach internal tapes to the onboard controller.
2. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit P/N 10K2340.
3. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
4. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
5. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
6. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator P/
N 00N7956.
7. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
8. NetMEDIA Systems Management Adapter (P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
9. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
10 . Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
11 . Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
90
Updated
17/10/00
91
Updated
17/10/00
Netfinity 7100 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Part Number
641YMxx
33L3067
33L3113
33L3115
10K2332
37L7201
37L7202
00N7990
37L6086
33L37xx
T274Axx
14RIxxx
High Availability Application Server
Description
Netfinity 7100 700/2 MB Xeon, 256 MB(R) ECC, Open, 40X, PCI
Netfinity 64 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 700 MHz/2 MB Upgrade II with Pentium III Xeon Processor
9.1 GB Wide Ultra160 SCSI Hot-Swap SL HDD
18.2 GB Wide Ultra160 SCSI Hot-Swap SL HDD
40/80 GB DLT Internal SCSI Tape Drive
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
250 W Hot-Swap Redundant Power Supply
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
APC Smart-UPS 1400
Quantity
1
2
6
1
4
2
4
4
1
1
1
1
Usage
-
-
-
2 GB Total System Memory
Total of 3 SMP processors
9.1 GB mirrored for NOS
72 GB RAID 5 with hot-spare
-
RAID 1 for NOS, RAID 5 for data
Full power redundancy
UPS
This tower server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with enough disk drives to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset...data. A modem could be included to allow out-of-band (non-
LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Server Consolidation
Part Number
631YMxx
33L3113
10K2331
37L7204
3L7205
37L6086
34L1501
00N7990
33L37xx
T274Axx
14RIxxx
Description
Netfinity 7100 700 MHz/1 MB Xeon, 256 MB(R) ECC, Open, 40X, PCI (Rack 8U)
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 700 MHz/1 MB Upgrade II with Pentium III Xeon Processor
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
Netfinity 10/100 Ethernet PCI Adapter 2
40/80 GB DLT Internal SCSI Tape Drive
250 W Hot-Swap Redundant Power Supply
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
APC Smart-UPS 1400
Quantity
1
1
1
1
2
1
1
2
8
4
1
Usage
-
768 MB Total System Memory
Total of 2 SMP processors
9.1 GB mirrored for NOS
109 GB RAID 5 with hot-spare
RAID 1 for NOS, RAID 5 for data
Total of 3 Ethernet connections
-
Full Power Redundancy
-
UPS
This tower model is configured to meet the need of server consolidation. Many businesses are trying to get their arms around the dispersed departmental servers that have grown up around the enterprise. By moving multiple servers onto one platform there is only one system to manage, both hardware and software. There is potentially less expense for service, software licenses, etc., and there is no need to worry about putting all your eggs in one basket because the Netfinity 7100 is designed for high availability. This configuration includes
109 GB of internal HDD storage, features a third power supply which provides fully redundant power, a UPS to help protect the system against a momentary electricity loss, and an internal tape drive that backs up, up to 80 GB per tape...in addition to all the standard features of the Netfinity 7100.
IBM Netfinity 7600 Configurator
51RYExx
1
24/10/00 550 1/4 1024 512MB(R)/16GB Rack(8U) 3/4
52RYExx
1
24/10/00 550 1/4 2048 512MB(R)/16GB Rack(8U) 3/4
53RYExx
1
K54RYxx
1
K55RYxx
1
-
-
-
700 1/4 2048 512MB(R)/16GB Rack(8U) 3/4
700 1/4 1024 512MB(R)/16GB Rack(8U) 3/4
700 1/4 2048 512MB(R)/16GB Rack(8U) 3/4
P, S,
H,F
P, S,
H,F
P, S,
H,F
P, S,
H,F
P, S,
H,F
S-Fans
S-Power
4
S-Fans
S-Power
4
Y 10/100 D,U2,R
5
4/2 0/364GB 40X-17X 14/12 6/5
Y 10/100 D,U2,R
5
4/2 0/364GB 40X-17X 14/12 6/5
S-Fans
S-Power
4
S-Fans
S-Power
4
Y 10/100 D,U2,R
5
4/2 0/364GB 40X-17X 14/12 6/5
Y 10/100 D,U2,R
6
4/2 0/364GB 40X-17X 14/12 6/5
S-Fans
S-Power
4
Y 10/100 D,U2,R
6
4/2 0/364GB 40X-17X 14/12 6/5
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 7600 Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor with advanced transfer (full speed) L2 cache and 100 MHz access to memory and I/O buses.
3. Advanced Chipkill ECC memory - corrects two-bit, three-bit, and four-bit memory errors.
4. Robust configurations may require optional Netfinity 250 W Hot-Swap Redundant Power Supply P/N 33L37xx for redundancy. See “Power” under Netfinity 7600 Power, Monitor & Accessories” for additional information.
5. RAID adapter is equivalent to Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086.
6. RAID adapter is equivalent to ServeRAID-4M Ultra160 SCSI Controller P/N 37L6080.
7. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
8. Not available from IBM after this date. Business Partner inventory may be available.
Netfinity 7600 Processor Upgrades
Part Number Processor Upgrades with Full Speed Cache SMP
Support
1
Processor Speed
Upgrade
2
33L5057
33L5058
Netfinity 550 MHz/1 MB Upgrade II with Pentium III Xeon Processor
Netfinity 550 MHz/2 MB Upgrade II with Pentium III Xeon Processor
1RY
2RY
-
1RY
10K2331
10K2332
Netfinity 700 MHz/1 MB Upgrade II with Pentium III Xeon Processor
Netfinity 700 MHz/2 MB Upgrade II with Pentium III Xeon Processor
-
3RY
1RY, 2RY
1RY, 2RY
1. Three additional processors may be installed, providing a maximum of four. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of four processors may be installed. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
92
Updated
17/10/00
Netfinity 7600 Memory Configurator
Total
Memory
1
Quantity of RDIMMs Added
2
128 MB
(P/N 33L3113)
256 MB
(P/N 33L3115)
512 MB
(P/N 33L3117)
1 GB
(P/N 33L3119)
512 MB
Se t 1- J1
Set 2- J2
Set 3- J3
Set 4- J4
Set 1- J5
Set 2- J6
Set 3- J7
Set 4- J8
Std. RDIMM
Std. RDIMM
Set 1- J9
Set 2- J10
Set 3- J11
Set 4- J12
Set 1- J13
Set 2- J14
Set 3- J15
Set 4- J16
Std. RDIMM
Std. RDIMM
All RDIMMs installed in each set must be the same size , but all the sets do not have to contain RDIMMs of the same size . Install RDIMM sets in numerical sequence from 1 to 4.
1.0 GB
1.5 GB
2.0 GB
2.5 GB
3.0 GB
4 GB
5 GB
6 GB
3
7 GB
3
8 GB
3
9 GB
10 GB
3
12 GB
3
14 GB
3
16 GB
3
(max)
4 x 128 RDIMMs standard
4
-
4
-
4
4
-
4
-
4
-
-
-
-
-
-
-
-
-
-
8
4
-
-
-
8
-
4
-
4
4
-
16
-
12
8
8
12
8
4
-
-
4
4
-
-
-
-
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system specifications for further information.
2. To obtain the Quantity of memory identified in the “Total Memory” column, select the appropriate row and order the quantity of RDIMMs identified in all columns for that row. Example: For 2.0 GB, order 4 x 33L3113 plus 4 x
33l3115.
3. Requires removal of standard RDIMMs.
Part Memory Description
1
Number
33L3113
33L3115
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
33L3117
33L3119
Netfinity 512 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 1 GB 100 MHz ECC SDRAM RDIMM
1. Due to four-way interleaving all RDIMMs installed in each set must be the same size, but all the sets do not have to contain RDIMMs of the same size. Install RDIMM sets in numerical sequence from 1 to 4. Chipkill support is provided on the memory card.
-
8
4
-
-
-
8
12
16
-
-
-
-
-
-
93
Updated
17/10/00
Netfinity 7600 Internal Hard Disk Drive Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
2
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
2
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
54.6 GB
63.7GB
72.8 GB
81.9GB
91 GB
109.2 GB
127.4GB
145.6GB
163.8GB
182GB
218.4GB
-
-
8
9
10
-
-
-
-
1
2
3
4
Standard on Base Models
-
5
6
7 -
-
3
1
-
2
4
-
5
6
7
-
-
-
-
-
-
1
2
-
-
3
-
8 4
9
10
-
-
5
6
5
6
1
2
3
4
8
9
10
-
-
-
-
-
-
Standard on Base Models
-
-
3
1
-
2
4
-
5
6
7
8
9
10
-
-
-
-
1
-
-
-
2
-
-
3
-
4
-
5
6
254.8GB -
291.2 GB -
327.6 GB
364 GB (max)
-
-
-
-
-
7
8
9
10
-
-
-
-
-
-
-
-
7
8
9
10
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Netfinity 7600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
Bay
-
-
RM 1
RM 2
1...10 or
1...7
NB3
3
Form
Factor
89 mm
(3.5”)
133 mm
(5.25”)
133 mm
(5.25”)
133 mm
(5.25”)
HS
19” Rack
Height
SL
HH
HH
1
HH
1
SL or HH
2
3U
Front
Access
Yes
Yes
Yes
Yes
Yes
Yes
Usage
Diskette
IDE CD-
ROM
Open
Open
Open
Open
Part
Number
Description RPM Height
Ultra160 Hard Disk Drives (HDD)
1
37L7201
37L7202
37L7203
37L7204
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap
SL HDD
36.4 GB Ultra160 SCSI Hot-Swap
SL HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
7200
7200
7200
10,000
37L7205
37L7206
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000
10,000
SL
SL
SL
SL
SL
SL
Bays
Supported
See diagram
See diagram
See diagram
See diagram
See diagram
See diagram
Max.
Qty.
10
10
10
10
10
10
1. Two half-high (HH) bays can be combined to support a single full-high
(FH) device
2. The top bay is HH; all others are configured in groups of 3 SL bays. When a
HH drive is installed in one of these groups, only another HH or a single SL drive can be installed in the same group. For clarity, the SCSI IDs are identified.
3. Tower configured systems (Netfinity 8Ux24D Rack-to-Tower Kit, P/N
37L6860 is required and includes a single NetBAY3) support installation of up to three NetBAY3s. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
94
Updated
17/10/00
SL
0
HH
0
19K0655
19K0656
00N6xxx
7
37L5857
37L0xxx
8
19K11xx
9
09N7296
00N71xx
10
94G7448
9.1 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
External Storage Expansion
Units
2
Netfinity EXP200 Storage
Expansion Unit
3, 6
Netfiinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant
Power Supply
6
EXP300 Storage Expansion Unit
4, 6
EXP300 Rack-to-Tower Conversion
Kit
FAStT EXP500 Storage Expansion
Unit
5, 6
Rack Power Cable Type C12
(3.7m, 12 ft.)
6
15,000
15,000
Form Factor
Rack (3U)
-
-
-
SL
SL
Rack (3U)
See diagram
See diagram
10
10
Removable
Media (RM)
Bays
Diskette
CD-ROM
Bay 1
Bay 2
1
3
4
5
9
10
11
13
14
2
4
8
10
12
14
Netfinity NetBAY3 (NB3)
(Optional on Tower Configurations)
1. The top bay is HH; all others are configured in groups of three SL bays.
When a HH drive is installed in one of these groups, only another HH or a single SL drive can be installed in the same group. For clarity, the SCSI IDs are identified.
Rack (3U)
-
Hot-Swap (HS)
Bays 10 x SL
-or-
7 x HH
(SCSI IDs
shown)
1. Netfinity 7600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
3. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply. Optional hotswap Netfinity EXP200 350W Power Supply P/N 37L0xxx provides redundancy. To convert an EXP200 to a tower form factor, Netfinity EXP200 Rack-to-Tower Conversion Kit P/N 37L5857 is required.
4. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500 W power supplies. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit P/N 09N7296 is required.
5. FAStT EXP500 Storage Expansion Unit includes dual hot-swap 350 W power supplies.
6. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
7. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
8. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
9.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
10. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
Internal SCSI Cabling
The Netfinity 7600 contains a DASD backplane supporting ten hot-swap, SCA-2 compliant drive bays. The backplane is connected to the internal connector of the standard Netfinity
ServeRAID-3HB Ultra2 SCSI Adapter through a 16-bit LVD SCSI cable. External RAID support is provided through the two external 0.8-mm VHDCI connectors on the back of the adapter. To support SCSI devices in the internal 133/89-mm (5.25/3.5-inch) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated terminator is included with the server.
This cable can be used to connect Channel B of the integrated Wide Ultra2 SCSI controller to SCSI devices in one or both of the removable media bays. Channel A, of the dualchannel, Wide Ultra2 SCSI controller, only supports external SCSI attachment and is cabled directly to an external 0.8-mm VHDCI SCSI connector.
95
Updated
17/10/00
Part
Number
Description
Storage Controllers
3
37L6086 Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
4
02K3454 PCI Fast/Wide Ultra SCSI Adapter
37L6080 Netfinity ServeRAID-4M Ultra160 SCSI Controller
5
37L6889 Netfinity ServeRAID-4H Ultra160 SCSI Controller
6
19K4646 PCI Wide Ultra160 SCSI Adapter
16
Fibre Storage Controller
7
00N6881 Netfinity FAStT Host Adapter
19K11xx
20
FAStT200 Storage Server
19K11xx
21
FAStT200 HA Storage Server
19K1121 FAStT200 Redundant RAID Controller
Networking
8
Ethernet
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
09N9901 10/100 EtherLink Server Adapter by 3Com
34L0301 Netfinity Gigabit Ethernet SX Adapter
Token Ring
34L5001 16/4 Token-Ring PCI Management Adapter
9
34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
9
34L5201 High speed 100/16/4 Token Ring PCI Management Adapter
Communications
10
Netfinity 7600 I/O Options
Adapter
Length
PCI Support Slots
Supported
1
Hot-
Plug
2
PCI
Voltage
Key
MHz
Full
Half
Full
Full
Half
Half
-
-
-
Half
Half
Half
Half
Half
Half
32/64-bit
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
-
-
-
32-bit
32-bit
32/64-bit
32-bit
32-bit
32-bit
3...6
3...6
1...6
1...6
1...6
1...6
-
-
-
1...6
1...6
1...6
1...6
1...6
1...6
X
X
-
X
-
X
X
X
X
X
X
-
-
X
-
5
5
Universal
Universal
Universal
Universal
-
-
-
Universal
Universal
Universal
Universal
Universal
Universal
33
33
33
33
33
33
-
-
66
-
33
33
33
33
66
Systems Management
11
36L96xx
19
Netfinity Advanced System Management PCI Adapter
12, 13
03K9309 Netfinity Advanced System Management Interconnect Cable Kit
14
36L9654 Netfinity Advanced System Management Token-RIng Connection
15
10L7368 Netfinity ESCON Adapter
17,18
Host Attach
Full
-
-
32-bit
-
-
3...6
13
-
-
-
-
-
5
-
-
Full 32-bit 3...6
18
5
1.The 5 V slots support Universal or 5 V adapters. The 3.3 V slots support universal or 3.3 V adapters. A Universal keyed 66 MHz adapter plugged into a 33 MHz slot will operate at 33 MHz. A
Universal keyed 33 MHz adapter plugged into a 66 MHz slot limits other adapters installed on the same bus to 33 MHz.
2. Slots 3-6 include hot-plug capability using IBM’s Active PCI technology.
3. Models P/N 51RYExx, 52RYExx and 53RYExx include a single ServeRAID-3HB Ultra2 SCSI controller as standard. Models P/N K54RYxx and K55RYxx include a single ServeRAID-4M
Ultra160 controller. One channel of these adapters is attached to the internal hot-swap backplane. Remaining channels are available for external usage just as the option would be. All models include a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller with one internal connector and one external port with a 0.8-mm Very High Density Connection Interface (VHDCI).
4. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and 2 external (0.8-mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8-mm VHDCI connector) providing a total of 3 external LVDS SCSI channels. Includes 32MB of mirrored battery-backup cache which helps protect against data loss in writeback cache mode in the event of a power outage or adapter maintenance.
5. Netfinity ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external Ultra160 connectors (only two connectors may be utilized). External connectors are 0.8-mm VHDCI.
6. Netfinity ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external Ultra160 connectors (only four connectors may be utilized). External connectors are 0.8-mm VHDCI.
7. See Fibre Array Solutions section for additional configuration information.
8. Netfinity 7600 includes a full-duplex, 10/100 Mbps Ethernet PCI Controller.
9. The Wake on LAN function of this option is not supported by Netfinity servers.
10. Netfinity 7600 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A compatible), and one high-speed (up to 2 MB/sec. data transfer speed) bi-directional parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
11. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 7600 works with Netfinity Director to provide significant system management function. When used with optional Netfinity Advanced System Management PCI Adapter P/N 36L96xx and Netfinity Advanced System Management Interconnect Cable Kit P/N 03K9309 additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.
12. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56-watt AC adapter which requires a separate power source. Provides an integrated
10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection P/N 36L9654.
13. A maximum quantity of one is supported.
14. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection (Netfinity 5500 models 1...4xX are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4 meters (300 ft.). A customer-supplied Ethernet cable is required for each interconnection.
15. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring
Connection cannot be connected or used together. To download the latest firmware access URL www.pc.ibm.com/us/netfinity. Select “Server Support”, “Family”, “Model”, “Downloadable files”, and finally “Advanced Systems Management”.
16. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm VHDCI connector. Only one of the two connectors may be utilised.
17. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
18. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single server.
19. Where ‘xx’ represents a country specific code: 57=Denmark, 58=South Africa/India, 59=UK, 60=Switzerland, 61=Italy, 62=Israel, 01K7310=Europe, 01K7209=US/Saudi Arabia.
20.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English
31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
21.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English,
45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
33
33
-
-
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
96
Updated
17/10/00
Slot 1- Bus A- 66 MHz- 3.3 V or Universal
Slot 2- Bus A- 66 MHz- 3.3 V or Universal
Slot 3- Bus B- 33 MHz- 5 V or Universal, Active PCI
Slot 4- Bus B- 33 MHz- 5 V or Universal, Active PCI
Slot 5- Bus B- 33 MHz- 5 V or Universal, Active PCI
Slot 6- Bus B- 33 MHz- 5 V or Universal, Active PCI
RAID Adapter
All Slots- Full Length, 64-bit
Netfinity 7600 Power, Monitors, Accessories
Part Number
33L37xx
10
94G7448
Description
Power
1,9
250 W Hot-Swap Redundant Power Supply
9
Rack Power Cable Type C12 (3.7m, 12 ft.)
9
Uninterruptable Power Supply (UPS)
2
SUP102Y
SUP142Y
14RIxxx
12
30RIxxx
12
37L6862
T3347xx
11
31H2Nxx
11
T32N3xx
11
T274Axx
11
11AG1xx
11
APC Smart-UPS 1000
APC Smart-UPS 1400
APC Smart-UPS 1400RMB
3
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Monitors
5
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
6
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image
Size), stealth black
6
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image
Size), stealth black
6
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image
Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0”
Viewable), stealth black
7
1. Netfinity 7600 includes three 250W hot-swap redundant power supplies, with the ability to accept one additional 250 W Hot-Swap Redundant Power Supply P/N 33L37xx. To assist in determining when an additional power supply is required to preserve redundancy, a “Non-
Redundant LED” is a standard feature of the Netfinity 7600. Predicting whether or not a particular configuration will require an additional power supply for redundancy is very complex. However, once the system is installed, the“Non-Redundant LED” will indicate when an additional power supply is required. The following sample configuration is provided as a reference.
Number of Power
Supplies
3
8
4
System Configuration Supported
Typical Redundant Configuration
4 x Processors
6 x PCI Adapters
7 x Half-High or 10 Slim-Line HDDs
16 x 512 MB RDIMMs
Full Configuration with Redundancy
Part Number
37L6860
930842P
930842X
9306900
9306910
9306200
10L6912
37L6888
94G7448
28L36xx
8
28L36xx
9
28L3675
Description
Conversion Kits
8Ux24D Rack-to-Tower Kit
1
Rack and NetBAY
2,10
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
Netfinity Rack (includes perforated door)
Netfinity NetBAY22
Netfinity NetBAY3
3
Netfinity Flat Panel Monitor Rack Mount Kit
Rack Power Cable Type C12 (3.7m)
10
Keyboard and Mouse
4
Space Saver II Keyboard
5, 7
Preferred Keyboard (stealth black)
6
Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3 with casters.
2. Netfinity 7600 rack models are housed in a 19” rack mountable drawer and require one of the racks listed here. See IBM Netfinity Rack Cabinet and Options section for IBM rack supported devices.
3. Netfinity 7600 requires 8Ux24D Rack-to-Tower Kit (P/N 37L6860) for use with a NetBAY3. A maximum of three NetBAY3 enclosures, including the one which ships with the conversion kit, may be stacked beneath a supported Netfinity tower server. Optional NetBAY3s must be shipped separately and not while attached to the base configuration. See IBM Netfinity NetBAY3 Stackable Enclosure section for supported devices.
4. Netfinity 7600 ships without a keyboard or mouse.
5. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
6. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
7. Advanced TrackPoint IV features are not available on IBM Netfinity systems.
8. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany, 49=Italian,
50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland, 19K3832=Sweden/Finland,
19K3833=Portugal, 19L3834=Belgium, 19K3836=Russia, 19K3837=Poland.
9. Where ‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian, 29=English,
31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
10. The Netfinity 7600 ships with a standard country power cord. For connection of a Rack model to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. Netfinity 7600 uses an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit
P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. The addition of a DLT tape drive may require a 4th power supply to preserve redundancy.
9. Rack Power Cable P/N 94G7448 (type C12 - one for each Power Supply), must be ordered for power connection to a high voltage UPS or PDU.
10. Where ‘xx’ refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark,
63=Israel, 64=Italy, 65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
11. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy,
SD=Saudi Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
12. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark,
ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe.
97
Updated
17/10/00
Netfinity 7600 Tape Options
Part
Number
Tape Drives Bays
Supported
SCSI
Interface
(bit)
Form
Factor
Termination
Included
68/50-pin
Converter Incl.
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
00N7990 40/80 GB DLT Internal SCSI Tape Drive
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
1, 2
1, 2
1/2
1, 2
16 Ultra2 LVD
16
16 Ultra2 LVD
16 Ultra2 LVD
89 mm
(3.5”) HH or 133 mm
(5.25”) HH
133 mm
(5.25”) HH
133 mm
(5.25”) FH
133 mm
(5.25”) HH
Y
N
N
N
N/A
N/A
N/A
N/A
00N79xx
9
Tape Autoloaders
DLT Tape Autoloader
00N7992 120/240GB DOS/4 Tape Autoloader
N/A
1/2
16
16 Ultra2 LVD
Desktop
133 mm
(5.25”) FH
Y
N
N/A
N/A
External Tape Libraries
3
00N79xx
10
DLT Tape Library 16
Desktop or
Rack
Y -
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
4
03K8705 DLT External SCSI Enclosure
5
03K8756 NetMEDIA Storage Expansion Unit EL
6
10L7113 NetMEDIA Systems Management Adapter
7
Associated Options
-
-
-
8/16
16
16
16 LVD
Desktop
Desktop
Rack
-
N
N
Y
N
00N7956
10K2340
68-pin External Multimode LVD/SE SCSI
Terminator
Media BayTray and LVD Cable Kit
1,8
-
-
16 LVD/SE
16 LVD
Ext.
Int.
Y
Y
N
N
Note: Netfinity 7600 includes a two-drop multimode terminated LVD SCSI cable, an available internal Ultra2 SCSI port and an external Ultra2 0.8-mm VHDCI connector.
N
N
N
N
Ext. Tape
Enclosures
10L7440,
03K8756
1
10L7440
2
,
03K8756
03K8705
03K8756
2
1
,
10L7440
03K8756
2
1
,
-
03K8756
1
-
-
-
-
03K8756
10L7440,
03K8705
-
1
1. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit P/N 10K2340.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator
P/N 00N7956.
6. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
7. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
9. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
10. Where ‘xx’ represents a country specific power cord code: Rack versions - 81=EU1, 82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
98
Updated
17/10/00
Netfinity 7600 Sample Configurations
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements.
Part Number
53RYExx
33L3113
33L3115
33L3117
10K2332
37L7201
37L7202
00N7990
33L37xx
T274Axx
28L36xx
14RIxxx
00N6xxx
37L0xxx
36L9750
9306200
28L0542
94G7448
94G7447
94G6670
High Availability Application Server
Description
Netfinity 7600 700/2 MB Xeon, 512 MB(R) ECC,RAID, Open, 40X, PCI (Rack 8U)
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 256 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 512 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 700 MHz/2 MB Upgrade II with Pentium III Xeon Processor
9.1 GB Wide Ultra160 SCSI Hot-Swap SL HDD
18.2 GB Wide Ultra160 SCSI Hot-Swap SL HDD
40/80 GB DLT Internal SCSI Tape Drive
250 W Hot-Swap Redundant Power Supply
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
External Storage
Netfinity EXP200 Storage Expansion Unit
Netfinity EXP200 350 W Redundant Power Supply
Netfinity 36.4 GB 10K-3 Wide Ultra2 SCSI Hot-Swap HDD
Rack
Netfinity NetBAY22
Netfinity Console Server Selector Switch (4-port)
Power Cable - Type C12
12ft Console Cable Set
Blank Filler Panel Kit
Quantity
1
1
10
1
1
1
1
6
1
3
2
4
4
1
4
1
1
1
1
1
Usage
-
-
-
4 GB Total System Memory
Total of 4 SMP processors
9.1 GB mirrored for NOS
72 GB RAID 5 with Hot-Spare
-
Full Power Redundancy
-
-
-
Includes 2-m Ultra2 cable
-
RAID 5 Data Storage with Hot-
Spare
This rack server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. Configured with enough disk drives to mirror the operating system and provide a standard RAID 5 environment for data, optional hot-swap redundant power and UPS for power even during a blackout, this server represents the leading edge in high availability. An internal tape drive is included to back up that all important asset...data. A modem could be included to allow out-of-band (non-
LAN) system management utilizing the integrated Netfinity Advanced System Management Processor.
Server Consolidation
Part Number
53RYExx
33L3113
10K2332
37L7204
37L7205
34L1501
00N7990
T274Axx
28L36xx
14RIxxx
9306200
28L0542
94G7448
94G7447
94G6670
Description
Netfinity 7600 700/2 MB Xeon, 512 MB(R) ECC, RAID, Open, 40X, PCI (Rack 8U)
Netfinity 128 MB, 100 MHz ECC SDRAM RDIMM
Netfinity 700 MHz/2 MB Upgrade II with Pentium III Xeon Processor
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Netfinity 10/100 Ethernet PCI Adapter 2
40/80 GB DLT Internal SCSI Tape Drive
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
Space Saver II Keyboard
APC Smart-UPS 1400RMB
Rack
Netfinity NetBAY22
Netfinity Console Server Selector Switch (4-port)
Power Cable - Type C12
12ft Console Cable Set
Blank Filler Panel Kit
Quantity
1
1
1
3
1
2
8
4
1
1
1
1
1
1
2
Usage
-
1 GB Total System Memory
Total of 2 SMP processors
9.1 GB mirrored for NOS
109 GB RAID 5 with Hot-Spare
Total of 4 Ethernet connections
-
-
-
-
-
-
Attaches to monitor
-
-
This rack server is configured to meet the need of server consolidation. Many businesses are trying to get their arms around the dispersed departmental servers that have grown up around the enterprise. By moving multiple servers on to one platform there is only one system to manage, both hardware and software. There is potentially less expense for service, software licenses, etc., and there is no need to worry about putting all your eggs in one basket because the Netfinity 7600 is designed for high availability. This configuration includes
109 GB of internal HDD storage, features three power supplies which provide fully redundant power, a UPS to help protect the system against a momentary electricity loss, and an internal tape drive that backs up, up to 80 GB per tape...in addition to all the standard features of the Netfinity 7600.
99
Updated
17/10/00
IBM Netfinity 8500R Configurator
15RYNxx
16RYNxx
1
1
24/10/00
24/10/00
550
550
1/8
1/8
1024
2048
512 MB
512 MB
R
R
/32 GB
/32 GB
Rack
(8U)
Rack
(8U)
Rack
(8U)
3/3
3/3
P, S, H,
F
P, S, H,
F
S-Fans,
S-Power
S-Fans,
S-Power
Y
Y
-
-
D, U2
D, U2
2/0
2/0
0/72.8 GB
0/72.8 GB
40X-17X
40X-17X
4/2
4/2
12/12
12/12
17RYNxx
1
700 1/8 1024 512 MB
R
/32 GB 3/3
P, S, H,
F
S-Fans,
S-Power
Y D, U2 2/0 0/72.8 GB 40X-17X 4/2 12/12
18RYNxx
1
700 1/8 2048 512 MB
R
/32 GB
Rack
(8U)
3/3
P, S, H,
F
S-Fans,
S-Power
Y D, U2 2/0 0/72.8 GB 40X-17X 4/2 12/12
* For IBM ServicePacs see Appendix F: IBM ServicePacs for Hardware Maintenance.
1. Housed in a 19” Rack mountable drawer and ships standard without a keyboard or mouse. See “Rack and NetBAY” under “Netfinity 8500R Power, Monitor & Accessories” for supported IBM racks.
2. Intel Pentium III Xeon processor.
3. Netfinity 8500R includes a systems management adapter equivalent to the one shipped with Netfinity Advanced System Management PCI Adapter P/N 36L96xx (Advanced System Management PCI
Adapter).
4. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
5. Not available from IBM after this date. Business Partner inventory may be available.
Netfinity 8500R Processor Upgrades
Part Number Processor Upgrades with 512 KB, 1 MB or 2 MB Cache
1
SMP Support
2
Processor Speed/Cache Upgrade
3
33L5104
33L5105
28L4730
28L4727
10K2330
Netfinity 8500R 550 MHz/1 MB Upgrade with Pentium III Xeon Processor
Netfinity 8500R 550 MHz, 2 MB Upgrade with Pentium III Xeon Processor
Netfinity 8500R>4-Way Enablement Kit (1X SRAM)
5
Netfinity 8500R>4-Way Enablement Kit (4X SRAM)
5
Netfinity 8500R 700 MHz/1 MB Upgrade with Pentium III Xeon Processor
3
Netfinity 8500R 700 MHz, 2 MB Upgrade with Pentium III Xeon Processor
3
5RY
6RY
4...6RY
4
4...6RY
4
7RY
4RY
4...5RY
4...6RY
4...6RY
4...6RY
5
4...7RY
5
10K2166
10K2335
10K2337
Netfinity 4X Accelerator Filter
Netfinity Mezzanine Expansion Kit
8RY
7...8RY
4
7...8RY
4
4...7RY
4...7RY
1. Netfinity 8500R architecture optimises memory and bus performance using a 100 MHz, five-port crossbar core chipset. Up to eight Pentium III Xeon processors are supported on two 100 MHz P-6
CPU buses. The recommended order of processor installation is: Sockets A1, A3, A2, A4, B1, B3, B2, B4.
2. Up to seven additional processors may be installed, providing a maximum of eight. All processors must be identical in type, speed, and cache size.
3. Requires removal of the standard processor(s). A maximum of eight processors may be installed. Installation of greater than four processors requires the addition of a mezzanine board and two cache coherency filters. Required options which provide the board and filters vary by model. For more information refer to “Processor Upgrade Requirements”. All processors must be identical in type, speed and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
4. See “Processor Upgrade Requirements” to determine when this option is required.
5. Replacement of the standard processor mezzanine board and the mezzanine board from any installed enablement kit of 550 MHz models is required. See “Processor Upgrade Requirements” to determine specific model upgrade requirements.
Processor Upgrade Requirements
1,2
Upgrade To
Upgrade From
< 4 x 550 MHz processors
> 4 x 550 MHz processors
< 4 x 700 MHz processors
< 4 x 550 MHz processors
n/a n/a
> 4 x 550 MHz processors
1 x 28L4730 or 1 x 28L4727
n/a
< 4 x 700 MHz processors
1 x 10K2337
3
1 x 10K2337
-
3, 4
> 4 x 700 MHz processors
1 x 10K2335, 2 x 10K2337
3
2 x 10K2337
3, 5
1 x 10K2335, 1 x 10K2337
1. This table does not address the processor part numbers required. It does address the optional Enablement Kit, Filters, and Mezzanine Board part numbers required.
2. All processors must be identical in type, speed, and cache size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in
Quick Path. Select “Downloadable files” then “BIOS”.
3. Remove the standard processor mezzanine board.
4. Remove all optional Enablement Kit components.
5. Remove Enablement Kit mezzanine board. The Enablement Kit 4X cache coherency filters are supported for use with Netfinity Mezzanine Expansion Kit P/N 10K2337.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
100
Updated
17/10/00
101
Updated
17/10/00
Netfinity 8500R ships with a single mezzanine board containing four Pentium III Xeon processor sockets with terminators in the unoccupied sockets. An additional mezzanine board may be added, expanding the number of processor sockets to eight. The two mezzanine boards are then linked through two cache coherency filter cards, one for each mezzanine board.
Netfinity 8500R > 4-Way Enablement Kits
(P/N 28L4730 and P/N 28L4727)
•Support for 550 MHz models only
•Required for installation of processors 5...8.
•One Processor Mezzanine Board
•Two cache coherency filter modules
•28L4730 economical 1X (256 K entries)
•28L4727 high performance 4X (1 M entries)
•Filters may be used with Mezzanine Expansion
Kit (P/N 10K2337)
Option Content
Netfinity 4X Accelerator Filter (P/N 10K2335)
• Two cache coherency filter modules
• Requires Mezzanine Kit 10K2337
Netfinity Mezzanine Expansion Kit (P/N 10K2337)
• One Processor Mezzanine Board
• Supports cache coherency filters from
the following options:
• P/N 10K2335
• P/N 28L4730
• P/N 28L4727
• Supports 700 MHz and above processors
only
• Required when upgrading models
8681-4RY...6RY to 700 MHz or above
Standard Mezzanine Board Optional Mezzanine Board
All installed processors must be identical in type, speed and cache size.
Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/pc/support and enter machine “Type-Model” in
Quick Path. Select “Downloadable files” then “BIOS”.
A1 A2 A3 A4 B1 B2 B3 B4
Optional Cache
Coherency Filter
Cards
A B
Recommended order of processor installation is:
Sockets A1, A3, A2, A4,
B1, B3, B2, B4
Netfinity 8500R Memory Configurator
Total System
Memory
1
Quantity of RDIMMs Added
Standard Models
256 MB
(2 x 128)
384
512
512 MB
(4 x 128)
640
768
128 MB
(P/N 20L0245)
1
2 or
256 MB
(P/N 20L0247)
-
1
512 MB
(P/N 20L0249)
-
-
1 GB
(P/N 33L3056)
-
-
Memory Card A- Std.
A1 Socke
A2 Socket
A3 Socket t
Memory Card B- Optional
Std. RDIMM B1 Socket
B2 Socket
B3 Socket
A4 Socket
B4 Socket
768
1024
1280
1536
1024
1280
1536
1792
4 or
6 or
8 or
10 or
2 or
3
4 or
5
1
-
2 or
-
1
-
-
-
A5 Socket
A6 Socket
A7 Socket
A8 Socket
Std. RDIMM
B5 Socket
B6 Socket
B7 Socket
B8 Socket
1792
2304
2560
2816
3072
3328
3840
4096
4352
4864
5376
5888
6400
7424
8192
8448
9472
10496
11520
12544
13568
14592
15488
16384
16640
18688
20736
22784
24832
26880
28928
30720
32768
2048
2560
2816
3072
3328
3584
4096
-
4608
5120
5632
6144
6656
7680
8192
8704
9728
10752
11776
12800
13824
14848
15488
16384
16896
18944
20992
23040
25088
27136
29184
30720
32768
12 or
16
2 or
18
2
or
20
2
or
22
2
or
24
2
or
28
2
or
30
2 or
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6 or
8 or
9
10 or
11
12 or
14
4
or
16
3
16
2
or
18
2
or
20
2
or
22
2
or
24
2
or
28
2
or
32
2, 3 or
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
32
3
4 or
-
5
-
6 or
7
-
8 or
9
10 or
11
12 or
14
4
or
16
3 or
16
2
or
18
2
or
20
2
or
22
2
or
24
2
or
26
2
or
28
2
or
-
2, 3
-
-
-
-
-
-
-
-
-
-
2
-
-
-
3
-
-
4
-
5
-
6
7
8
3
8
9
10
11
12
16
2
18
2
20
2
22
2
24
2
26
2
13
14
4
15
6
16
3
28
2
30
5
32
3
A9 Socket
A10 Socket
A11 Socket
A12 Socket
A13 Socket
A14 Socket
A15 Socket
A16 Socket
(J1-J16)
Std. RDIMM
Std. RDIMM
B9 Socket
B10 Socket
B11 Socket
B12 Socket
B13 Socket
B14 Socket
B15 Socket
B16 Socket
(J1-J16)
Recommended order of RDIMM population for optimum cooling: 1, 5, 9, 13, 3, 7, 11, 15, 2, 6, 10, 14, 4, 8, 12, 16.
This table does not represent all possible memory configurations. Memory modules may vary in price per MB. Selection of smaller RDIMMs may provide a more cost-effective alternative to using larger RDIMMs.
NOTE: Cache line interleaving may be enabled by installing Netfinity 8500R Memory Expansion Card P/N 28L4454 with as few as two RDIMMs. Matched pairs must be installed if the memory expansion card is present.
1. Network Operating Systems may limit the maximum amount of addressable memory. See the operating system specifications for further information.
2. Netfinity 8500R Memory Expansion Card (P/N 28L4454) is required for installation of greater than 16 RDIMMs.
3. Requires removal of standard memory.
4. Models with 4 x 128 RDIMMs standard require Netfinity 8500R Memory Expansion Card (P/N 28L4454) for installation of greater than 16 RDIMMs.
5. Requires removal of all but two of the standard RDIMMs.
6. Requires removal of all but one of the standard RDIMMs.
Part Number Memory Description
1
20L0245
20L0247
20L0249
28L4454
Netfinity 128 MB SDRAM ECC RDIMM II
Netfinity 256 MB SDRAM ECC RDIMM II
Netfinity 512 MB SDRAM ECC RDIMM II
Netfinity 8500R Memory Expansion Card
2
33L3056 Netfinity 1 GB SDRAM ECC RDIMM II
1. Netfinity 8500R includes a single memory card with the ability to support up to 16 GB of memory. Model 14RYNxx contains two RDIMMs standard, other models contain four. For memory installation of greater than 16 GB, Netfinity 8500R Memory Expansion Card (P/N 28L4454) is required. Installation of memory on systems containing a single memory card (standard on all models) has no restrictions on size or placement. When Netfinity 8500R Memory Expansion Card (P/N 28L4454) is installed, the memory RDIMM in each socket of Card A must match the RDIMM in the same socket on Card B. To enable cache line interleaving, both memory cards must be installed and configured identically.
2. Required for enablement of cache line interleaving or installation of greater than 16 RDIMMs. Configuration of the standard memory card (Card A) and optional 28L4454 (Card B) must be identical.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
102
Updated
17/10/00
Netfinity 8500R Internal Hard Disk Drive Configurator
Total Internal
Storage
1
9.1 GB
7200 RPM Hard Disk Drives (HDDs)
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
9.1 GB
(P/N 37L7204)
2
10,000 RPM HDDs
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
2
0 GB
9.1 GB
18.2 GB
1
2
Standard on Base Models
-
1
-
-
1
2
Standard on Base Models
-
1
-
-
36.4 GB
72.8 GB (max)
-
-
2
-
1
2
-
-
2
-
1
2
This table does not represent all possible hard drive configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Netfinity 8500R contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
Bay
-
-
1...2
NB3E
1
Form
Factor
133 mm
(5.25”)
89 mm
(3.5”)
HS
19” Rack
Height
HH
SL
HH
3U
Front
Access
Yes
Usage
IDE CD-ROM
Yes
Yes
Yes
1. A total of three optional 3U NetBAY3Es can be stacked beneath a Netfinity
8500R which has Netfinity 8Ux28D Rack-to-Tower Kit (P/N 28L4705) installed. See IBM Netfinity NetBAY3x Stackable Enclosure section for supported devices.
CD-ROM
Diskette
Hot-Swap (HS)
Bay 1 Bay 2
Netfinity NetBAY3E (NB3E)
(Optional)
(Requires Rack to
Tower Kit)
Diskette
Open
Open
Part
Number
Description RPM Height Bays
Supported
Max
Qty.
Ultra160 Hard Disk Drives (HDD)
1
37L7201
37L7202
37L7203
37L7204
37L7205
37L7206
19K0655
19K0656
9.1 GB Ultra160 SCSI Hot-Swap SL
HDD
18.2 GB Ultra160 SCSI Hot-Swap SL
HDD
36.4 GB Ultra160 SCSI Hot-Swap SL
HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10-K Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
External Storage Expansion Units
2
7200
7200
7200
10,000
10,000
10,000
15,000
15,000
SL
SL
SL
SL
SL
SL
SL
SL
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
2
2
2
2
2
2
2
2
Form Factor
00N6xxx
37L5857
37L0xxx
19K11xx
7
8
09N7296
9
Netfinity EXP200 Storage Expansion
Unit
3, 6
Netfinity EXP200 Rack-to-Tower
Conversion Kit
Netfinity EXP200 350 W Redundant
Power Supply
6
EXP300 Storage Expansion Unit
4, 6
EXP300 Rack-to-Tower Conversion
Kit
Rack (3U)
Tower
-
Rack (3U)
-
00N71xx
10
94G7448
FAStT EXP500 Storage Expansion
Unit
5, 6
Rack Power Cable Type C12
(3.7m, 12 ft.)
6
Rack (3U)
-
1. Netfinity 8500R contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to Appendix D: Cables-
Storage Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
3. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350W power supply. Optional hotswap Netfinity EXP 350W Power Supply P/N 37L0xxx provides redundancy. To convert an EXP200 to a tower form factor, Netfinity EXP200 Rack-to-Tower Conversion Kit P/N 09N7296 is required.
4. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies. To convert an
EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit P/N 09N7296 is required.
5. FAStT EXP500 Storage Expansion Unit includes dual hot-swap 350 W power supplies.
6. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
7. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/Spanish,
902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/Italian, 907=South
Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
8. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication Kits are included throughout.
9.Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
10. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
103
Updated
17/10/00
Internal SCSI Cabling
Netfinity 8500R systems contains an LVDS backplane supporting two hot-swap drive bays that support installation of up to two 3.5-inch, slim-high or half-high HDDs. The backplane is connected to the internal Wide Ultra2 SCSI controller through a 16-bit LVD SCSI cable. RAID support for the internal hot-swap drive bays is provided by adding a supported RAID adapter and moving the standard SCSI cable from the onboard controller to the optional RAID controller. The standard external Wide Ultra2 SCSI port uses a 0.8-mm Very High Density Connector Interface (VHDCI).
.
Netfinity 8500R I/O Options
Part
Number
Description Adapter
Length
PCI
Support
Slots
Supported
1
Hot-
Plug
2
PCI Voltage
Key
MHz
01K7364
37L6086
37L6080
37L6889
19K4646
02K3454
Storage Controllers
3
Netfinity ServeRAID-3L Ultra2 SCSI Adapter
4
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
5
ServeRAID-4M Ultra160 SCSI Controller
6
ServeRAID-4H Ultra160 SCSI Controller
7
PCI Wide Ultra160 SCSI Adapter
10
PCI Fast/Wide Ultra SCSI Adapter
Fibre Storage Controller
9
Netfinity FAStT Host Adapter
FAStT200 Storage Server
FAStT200 HA Storage Server
Full
Full
Full
Full
Half
Half
32-bit
32/64-bit
32/64-bit
32/64-bit
32/64-bit
32-bit
(1...5, 10...12)
8
(1...5, 10...12)
8
1...12
1...12
1...12
1...5, 10...12
X
X
X
X
-
-
5
5
Universal
Universal
Universal
5
33
33
33
33
66
33
00N6881
19K11xx
22
19K11xx
23
19K1121
Half
-
-
-
32/64-bit
-
-
-
1...12
-
-
-
X
-
-
-
Universal
-
-
-
66
-
-
-
34L1501
09N9901
34L0301
FAStT200 Redundant RAID Controller
Networking
11
Ethernet
Netfinity 10/100 Ethernet PCI Adapter 2
10/100 EtherLink Server Adapter by 3Com
Netfinity Gigabit Ethernet SX Adapter
Half
Half
Half
32-bit
32-bit
32/64-bit
1...12
1...12
1...12
X
X
X
Universal
Universal
Universal
33
33
33
34L5001
34L0701
34L5201
37L14xx
03K9309
36L9654
02K65xx
21
Token Ring
16/4 Token-Ring PCI Management Adapter
12
Token-Ring 16/4 PCI Adapter 2 with Wake on LAN
12
High speed 100/16/4 Token Ring PCI Management Adapter
Communications
13
Serial I/O SST 8, 16 and 128 Port Adapters
14
Systems Management
15
Netfinity Advanced System Management Interconnect Cable Kit
16
Netfinity Advanced System Management Token-Ring Connection
17
UltraSlim 56W AC Adapter
18
Half
Half
Half
32-bit
32-bit
32-bit
Half 32-bit
-
-
-
-
-
-
-
-
-
1...12
1...12
1...12
10...12)
14
X
X
-
-
-
-
-
Universal
Universal
Universal
5
-
-
-
-
-
-
33
33
33
33
10L7368
Host Attach
Netfinity ESCON Adapter
19, 20
Full 32-bit (1...5, 10...12)
20
5 33
1. The P-6 I/O bus supports four independent 64-bit PCI buses, two of which drive eight 33 MHz, 5.0 V slots (1-5, 10-12), while the other two buses drive four 66 MHz, 3.3 V slots (6-9). The 5 V slots support
Universal or 5 V adapters. A 66 MHz adapter plugged into these slots will operate at 33 MHz. The 3.3 V slots support Universal or 3.3 V adapters. A 33 MHz adapter plugged into these slots limits a 66 MHz
PCI adapter installed on the same bus to 33 MHz.
2. All 12 Slots are hot-plug capable using IBM’s Active PCI technology. For Network Operating System support access URL www.ibm.com/pc/us/compat.
3. Netfinity 8500R includes a dual-port, dual-channel, 64-bit Wide Ultra2 SCSI controller which supports either Single Ended (SE) or Low Voltage Differential SCSI (LVDS) modes. One internal connector and one external port with a 0.8-mm Very High Density Connection Interface (VHDCI) are standard. The internal LVD SCSI cable has sufficient length to attach to an adapter located in slots 10...12. If a boot device (internal or external) is to be attached to an adapter, the adapter must reside in slots 10...12 due to BIOS scanning sequences.
4. Netfinity ServeRAID-3L Ultra2 SCSI Adapter P/N 01K7364 provides either one internal or one external (0.8-mm VHDCI) LVDS SCSI channel.
5. Netfinity ServeRAID-3HB Ultra2 SCSI Adapter P/N 37L6086 provides one internal and two external (0.8 mm VHDCI) LVDS SCSI channels. The internal channel can be configured for external usage (0.8 mm VHDCI) providing a total of three external LVDS SCSI channels. Includes 32 MB of mirrored battery-backup cache, which helps protect against data loss in write-back cache mode in the event of a power outage or adapter maintenance.
6. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100 MHz Intel i960 processor and provides two channels, 64 MB of battery-backed ECC cache and two internal and two external Ultra160 connectors (only two connectors may be utilised). External connectors are 0.8-mm VHDCI.
7. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266 MHz PowerPC 750 processor and provides 128 MB of battery-backed ECC cache with two internal and up to four external Ultra160 connectors (only four connectors may be utilised). External connectors are 0.8-mm VHDCI.
8. A total quantity of eight, in any combination of 01K7364 and 37L6086 is supported.
9. See Fibre Channel Solutions section for additional configuration information.
10. PCI Wide Ultra160 SCSI Adapter P/N 19K4646 provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector with a 0.8-mm
VHDCI connector. Only one of the two connectors may be utilised.
11. Netfinity 8500R does not include an onboard network controller.
12. The Wake on LAN function of this option is not supported by Netfinity servers.
13. Netfinity 8500R includes two USB ports, two high-speed serial/asynchronous ports, (NS 16550A compatible), and one high-speed (up to 2 MBps data transfer speed) bi-directional parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.
14. See Appendix E for details on Serial I/O options and configuration limitations. A maximum of four Serial I/O adapters (any combination of P/N 37L1414, 37L1415, 37L1416) may be installed.
15. Netfinity 8500R ships standard with a Netfinity Advanced System Management PCI Adapter.
16. Required for all Netfinity Servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or modem connection
(Netfinity 5500 models 1xX...4xX are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an aggregate connection length of no more than 91.4 meters (300 ft). A customer-supplied Ethernet cable is required for each interconnection.
17. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter and a PC Card to 9-pin D-Shell cable which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring Connection cannot be connected or used together. To download the latest firmware, access URL www.ibm.com/pc/us/netfinity. Select “Server Support”, “Family”, “Model”, “Downloadable Files” and finally “Advanced System Management”.
18. Although the 8500R integrated Netfinity Advanced System Management PCI Adapter is powered continuously through the redundant power supply subsystem, an even higher level of availability is offered with the addition of UltraSlim 56W AC Adapter by allowing an independent power source or connection to a separate optional UPS.
19. Provides an ESCON MIC and DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.
20. A maximum of two ESCON adapters (installed in non-adjacent slots) are supported in a single Netfinity server. Where possible, install in a minimally loaded bus.
21. Where ‘xx’ represents a country specific code: 84=Denmark, 89=Israel, 88=Italy, 85=South Africa/India, 87=Switzerland, 86=UK, 83=EU1.
22.Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English 31=South
Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
23.Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South
Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
104
Updated
17/10/00
Full Length, 64-bit, Hot-Plug PCI Slots
Netfinity 8500R Power, Monitors, Accessories
Part
Number
Description
94G7448
30RIxxx
10
37L6862
Power
1
Rack Power Cable Type C12 (3.7m, 12 ft.)
8
Uninterruptible Power Supply (UPS)
2
APC Smart-UPS 3000RMB
3
APC Smart-UPS 5000RMB
4
Monitors
5
T3347xx
31H2Nxx
9
9
E51 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
E54 Color Monitor 15” (350-mm, 13.8” Viewable Image Size), stealth black
6
T32N3xx
9
E74 Color Monitor 17” (403-mm, 15.9” Viewable Image Size), stealth black
6
T274Axx
11AG1xx
9
9
G78 Color Monitor 17” (454-mm, 17.9” Viewable Image Size), stealth black
6
T54A TFT LCD Color Monitor (306-mm x 230-mm, 15.0” Viewable), stealth black
7
1.Netfinity 8500R systems contain three 750 W (at 220 V), hot-swap power supplies which handle robust configurations while providing full redundancy. Even though multiple UPSs may provide redundant power sources, systems management software does not currently take advantage of its power outage alerts.
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimates.
3. Height is 3U. See “Rack and NetBAY” for supported IBM racks.
4. Height is 5U. See “Rack and NetBAY” for supported IBM racks.
5. Netfinity 8500R uses an SVGA controller (S3 Trio 3D chipset) with 4 MB of video memory.
6. Installation within a rack requires optional Monitor Compartment P/N 94G7444.
7. Installation within a rack requires optional Netfinity Flat Panel Monitor Rack Mount Kit
P/N 37L6888 and Netfinity Rack Keyboard Tray P/N 28L4707. A space saver keyboard may coexist within the same keyboard tray.
8. Rack Power Cable P/N 94G7448 (type C12 - one for each Power Supply), must be ordered for power connection to a high voltage UPS or PDU.
9. Where ‘xx’ represents a specific country code: DK=Denmark, IS=Israel, IT=Italy, SD=Saudi
Arabia, SA=South Africa, CH=Switzerland, UK=UK, EU=Europe.
10. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel,
ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom,
EUR=Europe.
Part Number
28L4705
930842P
930842X
9306900
9306910
36L9703
9306200
8Ux28D Rack-to-Tower Kit
1
Rack and NetBAY
2,12
Netfinity Enterprise Rack
Netfinity Enterprise Expansion Cabinet
Netfinity Rack
3
Netfinity Rack
3
(includes perforated front door)
Netfinity NetBAY22
4
Description
Conversion Kits
Netfinity Rack Extension Kit
36L9702 NetBAY22 Rack Extension Kit
36L9701 Netfinity NetBAY3E
5
37L6888
94G7448
28L36xx
10
28L36xx
11
Netfinity Flat Panel Monitor Rack Mount Kit
Rack Power Cable Type C12 (3.7m)
12
Keyboard and Mouse
6
Space Saver Keyboard
7, 8
Preferred Keyboard (stealth black)
9
28L3675 Sleek 2-Button Stealth Black Mouse
1. Includes one Netfinity NetBAY3E with casters.
2. Netfinity 8500R is housed in a 19” rack mountable drawer and requires one of the racks listed here. See “IBM Netfinity Rack Cabinet and Options” section for IBM rack supported devices.
3. Netfinity Rack Extension Kit P/N 36L9703 is required for proper rear door closure clearance.
4. NetBAY22 Rack Extension Kit P/N 36L9702 is required for proper rear door closure clearance.
5. A maximum of three NetBAY3E enclosures may be stacked beneath a supported Netfinity tower server (conversion kit P/N 28L4705 required). See IBM Netfinity NetBAY3X Stackable Enclosure section for supported devices.
6.Netfinity 8500R ships without a keyboard or mouse.
7. Installation within a rack requires optional keyboard tray P/N 28L4707 (stows in “ready-to-use” position).
8. Advanced TrackPoint IV features are not available on IBM Netfinity sy.stems.
9. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel display.
10. Where ‘xx’ represents country specific code: 46=Danish , 47=France, 48=Germany,
49=Italian, 50=Spanish, 51=UK English, 44=US English, and P/N 19K3831=Switzerland,
19K3832=Sweden/Finland, 19K3833=Portugal, 19K3834=Belgium, 19K3836=Russia,
19K3837=Poland.
11. Where ‘xx’ represents a country specific code: 25=French, 26=German, 27=Italian,
29=English, 31=Danish, 33=Norwegian, 34=Swedish/Finnish, 35=Swiss, 36=Dutch.
12. The Netfinity 8500R ships with a standard country power cord. For connection to a high voltage UPS or PDU, a Rack Power Cable P/N 94G7448 (type C12), must be ordered.
105
Updated
17/10/00
.
Netfinity 8500R Tape Options
Part
Number
Description
00N7991 20/40 GB DDS/4 4-mm Internal Tape Drive
01K1325 20/40 GB 8-mm Internal SCSI Tape Drive
09N4040 20/40 GB DLT Internal SCSI Tape Drive
00N7990 40/80 GB DLT Internal SCSI Tape Drive
00N8017 60/120GB 8-mm M2 SCSI Tape Drive
Bays
Supported
N/A
N/A
N/A
N/A
N/A
SCSI
Interface
(bit)
16 Ultra2
LVD
16
8
16 Ultra2
LVD
16 Ultra2
LVD
Form Factor
89 mm (3.5”) HH or
133 mm (5.25”) HH
133 mm (5.25”) HH
133 mm (5.25”) FH
133 mm (5.25”) FH‘
133 mm (5.25”) HH
Termination
Included
Y
N
N
N
N
68/50-pin
Converter
Incl.
N/A
N/A
Y
N/A
N/A
Ext. Tape
Encl.
10L7440
03K8756
1
10L7440
2
03K8756
03K8705
2
,
03K8756
03K8705
03K8756
2
1
,
10L7440
03K8756
2
1
,
00N79xx
9
Tape Autoloaders
DLT Tape Autoloader
00N7992 120/240GB DDS/4 Tape Autoloader
-
N/A
16
16 Ultra2
LVD
Desktop
133 mm (5.25”) FH
Y
N
N/A
N/A
-
03K8756
1
External Tape Libraries
3
00N79xx
10
DLT Tape Library
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
4
03K8705 DLT External SCSI Enclosure
5
03K8756 NetMEDIA Storage Expansion Unit EL
6
10L7113 NetMEDIA Systems Management Adapter
7
Associated Options
-
-
-
-
-
16
8/16
16
16
16 LVD
Desktop or Rack
Desktop
Desktop
Rack
-
Y
N
N
Y
N
-
N
N
N
N
-
-
-
-
03K8756
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
10K2340 Media BayTray and LVD Cable Kit
1,8
16 LVD/SE Ext.
Y N
10L7440,
03K8705
16 LVD Int.
Y N
Note: Netfinity 8500R does not support internal tape drives but does include an external Ultra2 0.8-mm VHDCI SCSI connector for attachment of an external tape or tape enclosure. All tape drives and enclosures are also supported by PCI Wide Ultra160 SCSI Adapter P/N 19K4646 which has an external 0.8-mm VHDCI connector. Select tape drive, enclosure and controller then use Appendix D: Cables-
Storage Units-Controllers to select an appropriate external cable
1. LVD support for LVD devices requires installation of the 16-bit multi-mode terminated, two-drop, SCSI cable included with optional Media Bay Tray and LVD Cable Kit P/N 10K2340.
2. Requires 68-pin External Multimode LVD/SE SCSI terminator P/N 00N7956.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Provides a black desktop 133 mm (5.25”) half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or 68-pin External
Multimode LVD/SE SCSI Terminator P/N 00N7956.
5. Provides a black desktop DLT tape enclosure with a 68-pin high density external connector. Requires termination by the tape drive or by installation of an External Multimode LVD/SE SCSI terminator
P/N 00N7956.
6. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half high (HH) extended length 133 mm
(5.25”) bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two power cords are also included.
7. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
8. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
9. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
10. Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
Note: For a complete list of all IBM and non-IBM options compatibility with Network Operating Systems and IBM xSeries and Netfinity Servers, access the IBM Proven compatibility pages on the Web at URL http://www.pc.ibm.com/us/compat
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
106
Updated
17/10/00
Netfinity 8500R Sample Configurations
The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing
Representative for assistance with your specific configuration requirements.
High Availability-Rack
Part Number
18RYNxx
10K2166
10K2335
10K2337
20L0247
28L4454
37L7201
37L6086
34L1501
31H2Nxx
28L36xx
30RIxxx
03K8756
00N7990
00N6xxx
37L0xxx
03K9311
37L7204
9306200
36L9702
94G7448
94G6670
Description
Netfinity 8500R (PIII Xeon 700/2MB 512 MB/Rack) (8U)
Netfinity 8500R 700 MHz/2MB Upgrade with Pentium III Xeon Processor
Netfinity 4X Accelerator Filter
Netfinity Mezzanine Expansion Kit
Netfinity 256 MB SDRAM ECC RDIMM II
Netfinity 8500R Memory Expansion Card
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
Netfinity 10/100 Ethernet PCI Adapter 2
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth black
Space Saver Keyboard
APC Smart-UPS 3000RMB
External Storage
NetMEDIA Storage Expansion Unit EL
40/80 GB DLT Internal SCSI Tape Drive
Netfinity EXP200 Storage Expansion Unit
Netfinity EXP200 350 W Redundant Power Supply
Netfinity 4.2 M Ultra2 SCSI Cable
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Rack Options
Netfinity NetBAY22
NetBAY22 Rack Extension Kit
Power Cable - Type C12
Blank Filler Panel Kit
Quantity
1
5
1
1
1
5
1
2
6
1
1
1
2
1
8
1
1
1
2
1
1
1
Usage
Power Redundancy standard
Total of 6 SMP processors
Required for greater than 4 processors in this model
Required for greater than 4 processors in this model
Total of over 2 GB of memory
Enables cache line interleaving
NOS mirroring
RAID Controller - NOS plus EXP200
-
-
-
-
External Tape Drive Enclosure
Installs in 03K8756
Provides additional 10 bays
-
Tape to Onboard SCSI, 3-HB to EXP200
RAID 5 with Hot-Spare in EXP200
Monitor and keyboard mount on top
Required for rear door closure
-
-
This high availability server is configured to act as the foundation for business critical applications, applications your business cannot afford to be without. The configuration includes enough disk drives to mirror the operating system and provide a RAID 5 data environment, power supply redundancy by the server and EXP200 and a UPS for power even during a blackout. A rack mounted tape drive is included to back up that all important asset...data. This server represents the leading edge in high availability.
Part Number
17RYNxx
10K2330
10K2335
10K2337
20L0249
28L4454
37L7201
34L1501
37L6086
31H2Nxx
28L36xx
30RIxxx
03K8756
00N7990
03K9310
00N6xxx
37L0xxx
3L7205
28L4705
36L9701
Notes/Exchange-Stack
Description
Netfinity 8500R (PIII Xeon 700/1 MB 512 MB/Rack) (8U)
Netfinity 8500R 700 MHz/1 MB Upgrade with Pentium III Xeon Processor
Netfinity 4x Accelerator Filter
Netfinity Mezzanine Expansion Kit
Netfinity 512 MB SDRAM ECC RDIMM II
Netfinity 8500R Memory Expansion Card
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
Netfinity 10/100 Ethernet PCI Adapter 2
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
E54 Color Monitor 15” (13.8” Viewable Image Size), stealth black
Space Saver Keyboard
APC Smart-UPS 3000RMB
External Storage
NetMEDIA Storage Expansion Unit EL
40/80 GB DLT Internal SCSI Tape Drive
Netfinity 2M Ultra2 SCSI Cable
Netfinity EXP200 Storage Expansion Unit
Netfinity EXP200 350 W Redundant Power Supply
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Stack Options
8Ux28D Rack-to-Tower Kit
Netfinity NetBAY3E
Quantity
2
1
3
1
1
1
1
5
1
1
1
1
1
1
1
2
1
10
1
3
Usage
Power redundancy standard
Total of 6 SMP processors
Required for greater than 4 processors
Required for greater than 4 processors
Total of 2 GB of memory
Enables cache line interleaving
NOS Mirroring
-
NOS plus EXP200
-
-
-
External Tape Enclosure - Install in NetBAY3E
Installs in 03K8756
Tape to Onboard SCSI
Provides additional 10 Bays, 1 x 2M cable
-
RAID 5 with Hot-Spare in EXP200
-
3 x 3U enclosure for UPS, EXP200, Tape
107
Updated
17/10/00
Two Node High Availability Cluster
Public LAN
Server Node A
CH3
ServeRAID-3HB
(37L6086)
CH2 CH1
10/100 Ethernet (34L1501)
10/100 Ethernet (34L1501)
(2 m cable std.
(03K9311) on EXP200)
Netfinity EXP200
Ethernet Crossover
Cable
1
CH3 CH2 CH1
Server Node B
10/100 Ethernet (34L1501)
ServeRAID-3HB
(37L6086)
10/100 Ethernet (34L1501)
Public LAN
1.Customer supplied Ethernet Crossover Cable may vary in length up to a maximum of 25 feet (7.6 m).
Part Number
18RYNxx
10K2166
10K2335
10K2337
20L0247
28L4454
34L1501
37L6086
37L7201
30RIxxx
03K8756
03K9311
00N7990
00N6xxx
37L0xxx
03K9311
37L7204
Two Node High Availability Cluster
Description
Server Nodes A & B
Netfinity 8500R (PIII Xeon 700/2 MB 512 MB/Rack) (8U)
Netfinity 8500R 700 MHz/2 MB Upgrade with Pentium III Xeon Processor
Netfinity 4X Accelerator Filter
Netfinity Mezzanine Expansion Kit
Netfinity 256 MB SDRAM ECC RDIMM II
Netfinity 8500R Memory Expansion Card
Netfinity 10/100 Ethernet Adapter 2
1
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
2
9.1 GB Ultra160 SCSI Hot-Swap SL HDD
APC Smart-UPS 3000RMB (3U)
External Storage
NetMEDIA Storage Expansion Unit EL (3U)
Netfinity 4.2 M Ultra2 SCSI Cable
3
40/80 GB DLT Internal SCSI Tape Drive
Netfinity EXP200 Storage Expansion Unit (3U)
2
Netfinity EXP200 350 W Redundant Power Supply
2
Netfinity 4.2 M Ultra2 SCSI Cable
2, 3
Quantity
2
16
2
4
2
10
2
2
4
2
1
2
1
1
1
1
10
Usage
Power redundancy standard
Total of 6 SMP processors per node
Required for greater than 4 processors
Required for greater than 4 processors
Total of over 2 GB of memory per node
Enables cache line interleaving
1 for crossover, 1 for public LAN/node
RAID controller - NOS plus EXP200
NOS mirroring
-
External Tape Drive Enclosure
03K8756 to onboard SCSI
Installs in 03K8756
Provides additional 10 bays
-
3-HB to EXP200
RAID 5 shared storage in EXP200
11AG1xx
28L36xx
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
Shared (or single occurrence) Resources
T54A Flat Panel Color Monitor (15.0” Viewable Image Size), stealth black
Space Saver Keyboard
Rack Options
1
1
Mounts in keyboard tray
-
930842P
37L6888
28L4707
28L0542
Netfinity Enterprise Rack
Netfinity Flat Panel Monitor Rack-Mount Kit (3U)
Netfinity Rack Keyboard Tray
Netfinity Console Server Selector Switch (4-port)
1
1
1
1
-
Mounts in keyboard tray
-
-
94G7448
94G7447
Power Cable-Type C12
12 ft. Console Cable Set
4
2
-
-
94G6670 Blank Filler Panel Kit 1 -
1. Requires customer supplied Ethernet Crossover Cable which may vary in length up to a maximum of 25 feet (7.6 m).
2. By replicating this item, up to a total quantity of four ServeRAID-3HB Adapters (plus options) and eleven EXP200s can provide over 2 Terabytes of storage. Additional power and rack space will be required.
3. Cable length requirements are dependent on component placement within the rack or rack suite. To determine specific configuration requirements use the Netfinity Rack and/or Spreadsheet Configurators which can be downloaded from Web site www.pc.ibm.com/europe/configurators
Clustering is a group of interconnected computers used as a single, unified computing resource. Clustering Netfinity servers, like the IBM Netfinity 8500R, provides a high availability solution to keep you in touch with the key applications you need to run your business.
This sample configuration consists of paired IBM Netfinity 8500R cluster nodes equipped with eight-way SMP capability and redundant power supplies. Microsoft Cluster Service (MSCS) has been validated on
IBM Netfinity 8500R servers, using the Netfinity ServeRAID-3HB with the EXP200 Storage Expansion Unit. MSCS allows two configured servers, referred to as nodes, to be connected together to form a cluster. Providing system redundancy means that a complete server can fail and client access to server resources is largely unaffected. MSCS extends this theme by also allowing for software failures at an application level as well as an operating system level. If the operating system fails, all applications and services can be restarted on another server, and if just one application fails, it can be managed by MSCS individually. An additional independent network connection is used to perform monitoring within the cluster. One or more disk subsystems are attached to both nodes. In the above example, a Netfinity EXP200 was selected and the Netfinity ServeRAID-3HB Ultra2 SCSI Adapters provide the I/O control. Netfinity ServeRAID-3HB handles the “SCSI heartbeat” connection without the need for a dedicated SCSI connection and logically attaches the quorum disk, which allows arbitration when a failure occurs. Additional information on IBM Netfinity and IBM PC Server Clustering Solutions may be found on the World
Wide Web by accessing URL www.ibm.com/pc/us/netfinity/clustering.html.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
108
Updated
17/10/00
109
Updated
17/10/00
IBM Netfinity EXP200 Configurator
Netfinity EXP200 Hard Disk Drive Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7204)
2
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
2
0 GB
9.1 GB
18.2 GB
27.3 GB
36.4 GB
45.5 GB
1
2
3
4
5
Standard on Base Models
-
1
-
2
-
-
-
-
1
5
6
1
2
3
4
Standard on Base Models
-
1
-
3
-
2
-
-
-
1
-
54.6 GB
63.7GB
72.8 GB
81.9GB
91 GB
109.2 GB
127.4GB
145.6GB
163.8GB
182GB
218.4GB
6
8
9
10
-
-
-
-
-
-
254.8GB -
3
7 -
4
-
5
6
7
10
-
-
-
-
2
-
-
3
-
8 4
9 -
5
6
7
-
-
8
9
10
-
-
-
-
-
4
-
5
6
7
8
9
10
-
-
-
-
3
-
-
2
291.2 GB
327.6 GB
-
-
-
-
8
9
-
-
-
-
8
9
364 GB (max) 10 10
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within + 0.2 GB unless otherwise noted.
2. Ultra160 HDDs are limited to a maximum of Ultra2 bus speeds.
-
4
-
5
6
7
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
110
Updated
17/10/00
Bay Form
Factor
HS Odd #s
Even
#s
HS
Height
Netfinity EXP200
P/N 00N6xxx
HH
HH
Front
Access yes yes
On - 2 x 5 bay bus
Switch
Off - 1 x 10 bay bus
External: LVD or SE SCSI
Internal: LVD SCSI
Auto Termination
Usage open open
2 x 0.8mm VHDCI
Connectors
1. Housed in a 19” rack-mountable drawer and ships standard with a single power supply, power cord and 2 meter Ultra2 SCSI cable.
Requires IBM Netfinity Enterprise Rack (P/N 930842P) or
Expansion Cabinet (P/N 9308842X), Rack (P/N 9306900),
NetBAY22 (P/N 9306200), NetBAY3 (P/N 10L6912) or NetBAY3E
(P/N 36L9701).
External Storage Expansion Unit requires storage controllers and external cables. Select a supported controller from the system configurator and cables from Appendix D: Cables-Storage Units-
Controllers.
Bus
1
2
Part
Number
Description RPM Height Bays
Supported
Max.
Qty.
Ultra160 Hard Disk Drives (HDD)
1
37L7201
37L7202
9.1 GB Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB Ultra160 SCSI Hot-
Swap SL HDD
37L7203
37L7204
36.4 GB Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 10K-4 Ultra160
SCSI Hot-Swap SL HDD
37L7205 18.2 GB 10K-4 Ultra160
37L7206
19K0655
36.4 GB 10K-4 Ultra160
SCSI Hot-Swap SL HDD
9.1 GB 15K-rpm Ultra160
SCSI Hot-Swap HDD
19K0656
18.2 GB 15K-rpm Ultra160
SCSI Hot-Swap HDD
External Storage
Expansion Unit
7200
7200
7200
10,000
10,000
10,000
15,000
15,000
SL
SL
SL
SL
SL
SL
SL
SL
Form Factor
1...10
1...10
1...10
1...10
1...10
1...10
1...10
1...10
10
10
10
10
10
10
10
10
00N6xxx
37L5857
4
Netfinity EXP200 Storage
Expansion Unit
2, 3
Netfinity EXP200 Rack-to-
Tower Conversion Kit
Rack (3U)
-
37L0xxx
5
94G7448
Netfinity EXP200 350 W
Redundant Power Supply
3
Rack Power Cable Type C12
(3.7m)
3
-
-
1. Ultra160 HDDs are limited to a maximum of Ultra2 bus speeds.
2. Netfinity EXP200 Storage Expansion Unit ships with 10 half-high hot-swap bays which can be configured as a single bus, two independent buses or twintailed single bus. Netfinity EXP200 includes a single 2 M Ultra2 SCSI cable and a single hot-swap 350 W power supply. Optional hot-swap Netfinity EXP200 350W Power Supply (P/
N 37L0xxx) provides redundancy. To convert an EXP200 to a tower form factor, Netfinity EXP200 Rack-to-
Tower Conversion Kit (P/N 37L5857) is required.
3. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage
UPS or PDU). Standard country power cords only are included. If required, order Rack Power Cables according to the number of power supplies.
4. Where ‘xxx’ represents a specific country code: 899=US/French, 900=European/English, 901=European/
Spanish, 902=European/French, 903=European/German, 904=Danish/English, 905=Israel/English, 906=Italian/
Italian, 907=South Africa/English, 908=Swiss/English, 909=Swiss/French, 910=Swiss/German, 912=UK/
English:- Line Cords/ Publication Country Kits are included throughout.
5. Where ‘xxx’ represents a country specific code:076=Euro/English , 077=Danish/English, 078=Israel/English,
079=Italy/English, 080=South Africa/English, 081=Swiss/English, 082=UK/English. Line Cords/Publication
Kits are included throughout.
Limitations
Netfinity EXP200 hot-swapping of HDDs is restricted to a HDD that is inactive or where a lighted fault LED is indicated. The EXP200 is not supported when the SCSI channel of the SCSI adapter to which it is attached is split between internal devices and external devices. Each EXP200 must be attached to a dedicated SCSI channel of a supported SCSI adapter. The standard EXP200 configuration is supported as a rack drawer and is not currently supported for stacking directly on one another. It can be installed in a Netfinity NetBAY3 or NetBAY3E storage unit and stacked up to three units high, with a supported server on top. In addition, it can be converted to a tower with the addition of a Netfinity EXP200 Rack-to-Tower Conversion Kit (37L5857). See Appendix D:
Cables- Storage Units- Controllers for supported controllers and cables. A single two meter cable is included with the EXP200.
111
Updated
17/10/00
Cables and Controllers:
See Appendix D: Cables - Storage Units - Controllers
Sample Configurations
The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing
Representative for assistance with your specific configuration requirements.
Netfinity EXP200 One Independent SCSI Bus
To configure as a single 10 drive SCSI channel, attach one external cable from the SCSI adapter to either the 1 IN or 2 IN connectors in the EXP200. Set switch
1 to “Off” position.
External cable
(or)
SERVER
Server SCSI
Adapter
Order:
1 x 00N6xxx
1 x External Cable*
See Cables - Storage Units -
Controllers section
Up to 10 Disk Drives
19” Rack Space
* One 2M Ultra2 cable is included with each EXP200.
Netfinity EXP200 Two Independent SCSI Buses
To configure as two independent 5 drive SCSI channels, attach one external cable from the SCSI adapter to the SCSI bus 1 IN connector in the EXP200.
Attach a second External SCSI cable from another SCSI adapter, in the same or separate server, to the 2 IN connector in the unit. Set switch 1 to “On” position.
SERVER
Server SCSI
Adapter
Server SCSI
Adapter
Order:
1 x 00N6xxx
2 x External Cables*
See Cables - Storage Units -
Controllers section
Up to 10 Disk Drives
19” Rack Space
External cables
* One 2M Ultra2 cable is included with each EXP200.
Switch 1
Off
Standard Repeater Card
Operational mode (SCSI F/
W, Ultra SCSI, Ultra2 SCSI) may be limited by controller, cable or cable length. See
Appendix D for additional information.
Switch 1
On
Standard Repeater Card
Operational mode (SCSI F/
W, Ultra SCSI, Ultra-2
SCSI) may be limited by controller, cable or cable length, or hard disk drive type. See Appendix D for additional information.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Netfinity EXP200 One Independent SCSI Bus
High Availability Configuration
To configure a single 10 drive SCSI channel for clustering, attach one external cable from the SCSI adapter in Node A to the 1 IN connector in the EXP200.
Connect a second external cable to a SCSI adapter in Node B and to the 2 IN connector in the EXP200.
Node B
Server SCSI
Adapter
Node A
Server SCSI
Adapter
Order:
1 x 00N6xxx
2 x External Cables*
See Cables - Storage Units -
Controllers section
Up to 10 Disk Drives
19” Rack Space
* One 2M Ultra2 cable is included with each EXP200.
External cables
Switch1
Off
Standard Repeater Card
Operational mode (SCSI F/
W, Ultra SCSI, Ultra-2
SCSI) may be limited by controller, cable, or cable length. See Appendix D for additional information.
1 2 3 4 5 6 7 8 9 10
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
112
Updated
17/10/00
113
Updated
17/10/00
IBM EXP300 Configurator
Total Int.
Storage
1
7200RPM Hard Disk Drives (HDDs) 10,000RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L7201)
2
18.2 GB
(P/N 37L7202)
2
36.4 GB
(P/N 37L7203)
2
9.1 GB
(P/N 37L7204)
2
18.2 GB
(P/N 37L7205)
2
36.4 GB
(P/N 37L7206)
2
0 GB
18.2 GB
36.4 GB
54.6 GB
72.8 GB
91 GB
109.2 GB
127.4 GB
145.6GB
182 GB
218.4 GB
254.8 GB
291.2 GB
2
4
6
8
10
12
14
-
-
-
-
-
Standard on Base Models
1
2
3
4
5
6
7
8
10
12
14
-
-
1
-
-
-
2
3
4
5
6
7
8
2
4
6
8
10
12
14
-
-
-
-
-
Standard on Base Models
1
2
3
4
5
6
7
8
10
12
14
-
364.0 GB
436.8 GB
-
-
-
-
10
12
-
-
-
-
10
12
509.6 GB
(max.)
14 14
This table does not represent all possible hard drive configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +/- 0.2 GB unless otherwise noted.
2. When combined with a ServeRAID-4x controller, Ultra2 and Ultra160 HDD’s may be mixed on the same bus and operate up to their maximum respective speeds.
2
-
3
-
1
-
6
7
8
-
4
5
SCSI ID
0...6
8...14
Cable
Length
(Meters
2
Form
Factor
HS
HS
80
Height
SL
SL
Front
Access
Yes
Yes
Maximum MB/s
Ultra2 Controller
160
Usage open open
Ultra160
Controller
EXP300 Hard Disk Drive Configurator
4.2
80 160
1. The EXP300 ships with a single Ultra2 SCSI cable similar to Netfinity
2M Ultra2 SCSI Cable (P/N 03K9310).
Part
Number
Description RPM Height
37L7201
37L7202
37L7203
37L7204
37L7205
37L7206
19K0655
19K0656
Ultra 160 Hard Disk Drives
(HDD)
2
9.1 GB Wide Ultra2 SCSI Hot-Swap
SL HDD
18.2 GB Ultra160 SCSI Hot-Swap
SL HDD
36.4 GB Ultra160 SCSI Hot-Swap
SL HDD
9.1 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
9.1 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
RPM
7200
7200
7200
10,000
10,000
10,000
15,000
15,000
Height
SL
SL
SL
SL
SL
SL
SL
SL
Bays
Supported
1
Bays
Supported
1...14
1...14
1...14
1...14
1...14
1...14
1...14
1...14
Max.
Qty.
14
3
14
3
14
3
14
3
14
3
14
3
14
3
14
3
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
114
Updated
17/10/00
115
Updated
17/10/00
EXP300
1
P/N 19K11xx
2 x 0.8mm VHDCI
Connectors
Selectable Bus Configuration
2 x 7 bays
1 x 14
2
bays
Ultra2 and/or Ultra160 HDDs
3
Auto Termination
SCSI IDs 0...6
SCSI IDs 8...14
External Storage Expansion
Unit
EXP300 Storage Expansion Unit
4, 5
Form
Factor
19K11xx
6
Rack (3U)
09N7296
EXP300 Rack-to-Tower Conversion
Kit
-
94G7448
Rack Power Cable Type C12
(3.7m)
5
-
1. EXP300 Storage Expansion Unit ships with 14 slim-line hot-swap bays which can be configured as a single bus, two independent buses or a twintailed single bus.
2. When combined with a ServeRAID-4x controller, Ultra2 and Ultra160 HDDs may be mixed on the same bus and operate at up to their maximum respective speeds.
3.Twintailing reduces the maximum number of HDDs on a single bus to 13.
4. EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies.
5. This unit does not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). A standard country power cord only is included. If required, order a Rack Power Cable.
6. Where ‘xx’ represents a specific country code: 51=US/English, 52=European/English, 56=Danish/English, 57=Israel/
English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included throughout.
1. Housed in a 19” rack mountable drawer and ships standard with redundant 500 W hot-swap power supplies, two power cords and a single 2M Ultra2 SCSI cable capable of supporting Ultra160 speeds.
2. Twintailing reduces the maximum number of HDDs on a single bus to 13.
3. When combined with a ServeRAID-4x controller, Ultra2 and
Ultra160 HDDs may be mixed on the same bus and operate at up to their maximum respective speeds.
Requires IBM Netfinity Enterprise Rack (930842P) or
Expansion Cabinet (930842X), Rack (9306900), NetBAY22
(9306200), NetBAY3 (10L6912), NetBAY3E (36L9701) or Rackto-Tower Conversion Kit (09N7296).
External Storage Expansion Units require storage controllers and external cables. Select a supported controller from the system configurator and cables from Appendix D: Cables-Storage Units-
Controllers.
Cables and Controllers:
See Appendix D: Cables - Storage Units - Controllers
EXP300 One Independent SCSI Bus
SERVER
ServeRAID
3x or 4x
Cable Group A
1
OR
Selectable Bus Configuration
1 x 14 bays
SCSI IDs 0...14
Order:
• 1 x P/N 19K11xx
• 1 x External Cable from Group A
1
• Up to 14 Ultra2 and/or Ultra160 HDDs
1. One 2 M Ultra2 cable is included with each EXP300. If a longer cable is desired, select one from cable group A.
EXP300 One Independent Twintail SCSI Bus
High Availability Configuration
To configure as one independent twintailed 13 bay SCSI bus, attach two external cables from two ServeRAID adapters, in the same or separate servers, to the two external ports of the EXP300. The EXP300 must be set for 1 x 14
2 bays.
SERVER
ServeRAID
3x or 4x
OR
SERVER
ServeRAID
3x or 4x
ServeRAID
3x or 4x
Cable Group A
1
Selectable Bus Configuration
1 x 14
2
bays
EXP300 Sample Configurations
EXP300 Two Independent SCSI Buses
To configure as two independent 7 bay SCSI buses, attach two external cables from two ServeRAID adapters, in the same or separate servers, to the two external ports of the EXP300. The EXP300 must be set for 2 x 7 bays.
SERVER
ServeRAID
3x or 4x
OR
SERVER
ServeRAID
3x or 4x
ServeRAID
3x or 4x
Cable Group A
1
Selectable Bus Configuration
2 x 7 bays
SCSI IDs 0...6
SCSI IDs 8...14
Order:
• 1 x P/N 19K11xx
• 2 x External Cables from Group A
1
• Up to 14 Ultra2 and/or Ultra160 HDDs
1. One 2 M Ultra2 cable is included with each EXP300. If a longer cable is desired, select one from cable droup A.
SCSI IDs 0...5, 8...14
Order:
• 1 x P/N 19K11xx
• 2 x External Cables from Group A
1
• Up to 13 Ultra2 and/or Ultra160 HDDs
1. One 2 M Ultra2 cable is included with each EXP300. If a longer cable is desired, select one from cable droup A.
2. Twintailing reduces the maximum number of HDDs on a single bus to 13.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
116
Updated
17/10/00
117
Updated
17/10/00
IBM FAStT200 (HA) Configurator
FAStT200 Storage Server - Hard Disk Drive Configurator
Total Internal
Storage
1
10,000 RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L6209)
18.2 GB
(P/N 37L6210 or
P/N 19K0652)
36.4 GB
(P/N 37L6211 or
P/N 19K0653)
0 GB
18.2 GB
36.4 GB
54.6 GB
72.8 GB
73.4 GB
91.0 GB
109.2 GB
145.6 GB
146.8 GB
182.0 GB
218.4 GB
220.2 GB
254.8 GB
291.2 GB
-
-
-
-
10 or
-
-
-
-
2 or
4 or
6 or
8 or
-
5
6 or
8 or
-
10 or
-
-
-
-
1
Standard on all Base Models
-
2 or
3
4 or
-
1
-
2
-
6
-
-
5
7
8
-
3
4
293.6 GB
327.6 GB
364.0 GB
367.0 GB
440.4 GB
513.8 GB
-
-
-
-
-
-
-
-
-
-
-
-
-
9
10
-
-
-
587.2GB
660.6 GB
-
-
-
-
-
-
734.0 GB (max) -
This table does not represent all valid hard drive configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +- 0.2 GB unless otherwise noted.
73.4 GB
(P/N 19K0654)
Part
Number
Description
37L6209 9.1 GB 10K-3 FC Hot-Swap HDD
37L6210 18.2 GB 10K-3 FC Hot-Swap HDD
37L6211 36.4 GB 10K-3 FC Hot-Swap HDD
19K0652 18.2 GB 10K-4 FC Hot-Swap HDD
19K0653 36.4 GB 10K-4 FC Hot-Swap HDD
19K0654 73.4GB 10K-4 FC Hot-Swap HDD
RPM
10,000
10,000
10,000
10,000
10,000
10,000
Height
SL
SL
HH
SL
SL
HH
Bays
Supported
1...10
1...10
1...10
1...10
1...10
1...10
Max. Qty
Supported
10
10
10
10
10
10
External Storage Expansion Unit
19K11xx
4
19K11xx
5
FAStT200 Storage Server
1,2,3
FAStT200 HA Storage Server
1,2
19K1121 FAStT200 Redundant RAID Controller
3
94G7448 Rack Power Cable Type C12 (3.7m)
2
Form Factor
Rack (3U)
Rack (3U)
-
-
1. The FAStT200 Storage Server and HA Storage Server include two hot-swap, 350 W auto-ranging redundant power supplies.
2. These units do not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU). A standard country power cord only is included. If required, order a Rack Power Cable.
3. Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controler P/N 19K1121.
4. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German,
28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German,
36=UK/English. Country/Language - Line Cords/Publications are included as indicated
5. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German,
42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German,
50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
5
6
7
4
-
-
8
9
10
-
3
2
-
-
-
-
-
-
-
-
1
-
-
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
118
Updated
17/10/00
119
Updated
17/10/00
IBM FAStT200 Storage Server P/N 19K11xx
1,2,3,5
IBM FAStT200 HA Storage Server P/N 19K11xx
1,2,4,5
Fibre Channel
Connectors
6
IN OUT
External: Fibre Channel
Internal: Fibre Channel
Auto Termination
Loop A
OUT IN
Loop B
1. Housed in a 19" Rack mountable drawer and ships standard with redundant power supplies and two standard country power cables requiring separate power sources. Requires IBM industry standard 19" rack, EIA-310D, with a minimum depth of 24"
(711.2 mm) or NetBAY3/3E.
Note: External Storage Expansion Units require storage controllers and external cables. Select a supported controller from the system configurator and cables from Appendix D: Cables-Storage-Units-Controllers.
2. The FAStT200 Storage Server includes a single loop only. The second loop (shown in the diagram) is available with the addition of a FAStT200 Redundant RAID Controller P/N 19K1121. This configuration then becomes equivalent to the
FAStT200 HA Storage Server.
3. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/
German, 28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English,
34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated.
4. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/
German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English,
48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
5. This unit does not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
A standard country power cord only is included. If required, order a Rack Power Cable.
6. GBICs are not included. Either Fibre Channel Long or Short-Wave GBICs (P/N 03K9307 or 03K9308 respectively) may be used.
IBM FAStT EXP500 Configurator
FAStT EXP500 Storage Expansion Unit - Hard Disk Drive Configurator
Total Internal
Storage
1
10,000 RPM Hard Disk Drives (HDDs)
9.1 GB
(P/N 37L6209)
18.2 GB
(P/N 37L6210 or
P/N 19K0652)
36.4 GB
(P/N 37L6211 or
P/N 19K0653)
0 GB
18.2 GB
36.4 GB
54.6 GB
72.8 GB
73.4 GB
91.0 GB
109.2 GB
145.6 GB
146.8 GB
182.0 GB
218.4 GB
220.2 GB
254.8 GB
291.2 GB
-
-
-
-
10 or
-
-
-
-
2 or
4 or
6 or
8 or
-
5
6 or
8 or
-
10 or
-
-
-
-
1
Standard on all Base Models
-
2 or
3
4 or
-
1
-
2
-
6
-
-
5
7
8
-
3
4
293.6 GB
327.6 GB
364.0 GB
367.0 GB
440.4 GB
513.8 GB
-
-
-
-
-
-
-
-
-
-
-
-
-
9
10
-
-
-
587.2GB
660.6 GB
-
-
-
-
-
-
734.0 GB (max) -
This table does not represent all valid hard drive configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive of choice. Total Internal Storage listed is within +- 0.2 GB unless otherwise noted.
73.4 GB
(P/N 19K0654)
Part
Number
Description
37L6209 9.1 GB 10K-3 FC Hot-Swap HDD
37L6210 18.2 GB 10K-3 FC Hot-Swap HDD
37L6211 36.4 GB 10K-3 FC Hot-Swap HDD
19K0652 18.2 GB 10K-4 FC Hot-Swap HDD
19K0653 36.4 GB 10K-4 FC Hot-Swap HDD
19K0654 73.4GB 10K-4 FC Hot-Swap HDD
RPM
10,000
10,000
10,000
10,000
10,000
10,000
Height
SL
SL
HH
SL
SL
HH
Bays
Supported
1...10
1...10
1...10
1...10
1...10
1...10
Max. Qty
Supported
10
10
10
10
10
10
External Storage Expansion Unit
00N71xx
3
FAStT EXP500 Storage Expansion Unit
1,2
94G7448 Rack Power Cable Type C12 (3.7m)
2
Form Factor
Rack (3U)
-
1. The FAStT EXP500 Storage Expansion Unit includes two hot-swap, 350 W auto-ranging redundant power supplies.
2. This unit does not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU). A standard country power cord only is included. If required, order a Rack Power Cable.
3. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English, 42=Israel/English,
43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/Language Line Cords/Publications are included as indicated.
5
6
7
4
-
-
8
9
10
-
3
2
-
-
-
-
-
-
-
-
1
-
-
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
120
Updated
17/10/00
121
Updated
17/10/00
IBM FAStT EXP500 Storage Expansion Unit
1
P/N 00N71xx
3,4
Fibre Channel
Connectors
2
IN OUT Switch
External: Fibre Channel
Internal: Fibre Channel
Auto Termination
Loop A
OUT IN
Loop B
1. Housed in a 19" Rack mountable drawer and ships standard with redundant power supplies and two standard country power cables requiring separate power sources. Requires IBM industry standard 19" rack, EIA-310D, with a minimum depth of 24"
(711.2 mm) or NetBAY3/3E.
Note: External Storage Expansion Units require storage controllers and external cables. Select a supported controller from the system configurator and cables from Appendix D: Cables-Storage-Units-Controllers.
2. GBICs are not included. Either Fibre Channel Long or Short-Wave GBICs (P/N 03K9307 or 03K9308 respectively) may be used.
3. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/Language
Line Cords/Publications are included as indicated.
4. This unit does not include a Rack Power Cable P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
Fibre Array Solutions
Fibre Interconnection Guidelines
00N6881
00N6882
01K7296
19K1121
2108R3S
2109S08
2109S16
SFCU1xx
3
FAStT Host Adapter
FAStT500 Mini Hub
FC Failsafe RAID Controller
FAStT200 Redundant RAID Controller
SAN Data Gateway Router
SAN FC Switch, 8-Port
SAN FC Switch, 16-Port
FC RAID Controller Unit
-
-
-
S
S
S
S
S
-
E
-
-
-
E
E
-
S
-
-
-
-
S
S
H
S
E
-
E
E
-
-
-
S
-
-
-
-
S
S
-
S
E
S
E
S
E
E
S
S
E
S
E
S
E
E
S
S
-
H
-
-
E
E
-
35L1647
19K11xx
5
19K11xx
6
00N69xx
2
00N71xx
4
03K9307
03K9308
SAN FC Managed Hub
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT500 Storage Server
FAStT EXP500 Storage Expansion Unit
FC Long-Wave GBIC
FC Short-Wave GBIC
S
S
S
-
-
-
-
E
-
-
H
E
H
H
S
-
-
-
-
-
-
E
H
-
-
E
H
H
S
-
-
-
-
-
-
-
E
E
E
-
H
H
-
E
E
E
-
H
H
E
-
-
-
-
H
H
E
E
E
E
-
H
H
S Short-wave connection only. See Fibre Device Ports Reference section for GBIC/Integrated port information.
L Long-wave connection only. See Fibre Device Ports Reference section for GBIC/Integrated port information
E Either Short-wave or Long-wave connections allowed. See Fibre Device Ports Reference section for GBIC/Integrated pinformation.
H Hardware connection. One of these devices installs directly into the other. i.e.: The FAStT500 Mini Hub (P/N 00N6882) installs directly into the FAStT500 Storage Server
(P/N 00N69xx
5
) to provide GBIC availability
S
E
S
-
-
-
S
-
S
-
-
H
-
E
E
-
E
-
-
-
E
H
H
S
-
-
-
-
-
E
E
-
E
-
-
E
H
H
S
H
-
-
-
E
E
-
E
-
-
-
E
H
H
1. This device requires the use of GBICs. Purchase of GBICs may be needed in order to make connections to this device. See the Fibre Device Ports Reference section for
GBIC/Integrated port information.
2. Where ‘xx’ represents a country specific code as follows:- 13=US/English, 14=Euro/English, 18=Denmark/English, 19=Israel/English, 20=Italy/English, 21=South Africa/English, 22=Switzerland/
English, 26=UK/English. Country/Language - Line Cords/Publications are included as indicated
3.
Where ’xx’ = country publication and power cord codes as follows:- UK=United Kingdom and Arabia, DK=Denmark, IS=Israel, IT=Italy, SD=Saudi Arabia, SA=South Africa, SE=Switzerland/
English, EU=countries not covered previously.
4. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English, 42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/
English, 49=UK/English. Country/Language - Line Cords/Publications are included as indicated
5. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English,
31=South Africa/English, 32=Switzerland/English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
6. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English,
45=South Africa/English, 46=Switzerland/English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
E
H
H
-
E
E
E
E
-
-
E
-
-
-
E
123
Updated
17/10/00
Fibre Device Ports Reference
Part
Number
Description Total
Connections
Possible
Integrated
Ports
Mini Hubs
Possible
Mini Hubs
Installed
GBIC
Ports
00N6881
00N6882
01K7296
03K9307
03K9308
19K1121
2108R3S
2109S08
2109S16
SFCU1xx
35L1647
FAStT Host Adapter
FAStT500 Mini Hub
1
FC Failsafe RAID Controller
FC Long-Wave GBIC
FC Short-Wave GBIC
FAStT200 Redundant RAID Controller
SAN Data Gateway Router
2
SAN FC Switch, 8-Port
SAN FC Switch, 16-Port
FC RAID Controller Unit
SAN FC Managed Hub
1
2
1
1
1
2
1
8
16
1
8
1
-
1
1
1
-
-
1
1
-
7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
19K11xx
19K11xx
00N69xx
FAStT200 Storage Server
FAStT200 HA Storage Server
FAStT500 Storage Server
2
4
16
4
-
-
-
-
-
8
-
-
4
00N71xx FAStT EXP500 Storage Expansion Unit 5 -
1. Each FAStT500 Mini Hub provides two GBIC ports.
2. Single-ended SCSI.
3. Included GBICs and integrated optical ports are short-wave.
4. FAStT500 Storage Server supports up to eight non-redundant or four redundant host connections and up to eight non-redundant or four redundant storage
connections.
4
2
4
8
1
-
8
16
-
1
-
2
-
-
-
2
Supported Cable Groups
Cable Group A (0.8 mm to 0.8 mm)
03K9310
03K9311
Netfinity 2 M Ultra2 SCSI Cable
Netfinity 4.2 M Ultra2 SCSI Cable
37L7101 Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973
03K9306
03K9305
Netfinity Fibre Channel 1 M Cable
Netfinity Fibre Channel 5 M Cable
Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters
(0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10 kilometers
(6.2 miles)
GBIC
03K9308
03K9307
Netfinity Fibre Channel Short-Wave
GBIC
1
Netfinity Fibre Channel Long-Wave
GBIC
1. Four Netfinity Fibre Channel Short-Wave GBIC’s (P/N 03K9308) are included with SAN Fibre Channel Switches (P/Ns 2109508 and
2109516).
GBICs
Included
-
-
-
-
-
-
4
3
4
3
-
-
-
-
-
-
-
FAStT Host Adapter
P/N 00N6881
Netfinity FAStT
Host Adapte
• PCI to FCAL 64/32-bit host adapter.
• Supported Attachments (use cable group D):
FAStT500 Storage Server
• Integrated short-wave optical port. No GBICs required.
•Full Fibre Channel Fabric support.
FAStT500 Storage Server
P/N 00N69xx
Mini Hub Mini Hub
Expansion Bays for
Additional Mini Hubs
GBIC Ports
GBIC Ports
FAStT500 Mini Hub
P/N 00N6882
GBIC Ports
GBIC
• Provides additional connections to the Netfinity FAStT500 Storage
Server - supports complex clustering or advanced storage applications.
• All connections to FAStT500 Mini Hubs require the use of GBICs.
GBICs are not included.
FAStT200 Storage Server P/N 19K11xx
GBIC Port
10/100 Ethernet Port RS-232
Power Supplies
• Dual high-performance, RAID controller cards-supports up to 100 MB/sec data transfer rate per controller.
• Two 175 W auto-ranging, hot-swap, redundant power supplies.
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) with shortwave cables and GBICs or indirectly through SAN Fibre Channel Managed Hub
(P/N 35L1647) using cables from cable group D or E with corresponding
GBICs.
• Height is 4U (1 U = 1.75 in. or 44.45 mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard Rack. Mounting rails are included with the controller.
• For optimum performance no more than two FAStT500 Storage Servers
(P/N 00N69xx) should be attached to a single hub (P/N 35L1647)
• Includes four FAStT500 Mini Hubs (P/N 00N6882), two for host and two for storage.
• FAStT500 256 MB Cache (P/N 00N6883) expansion is required in installations where a large number of devices are supported.
• All connections to FAStT500 Mini Hubs require the use of GBICs. GBICs not included.
Fibre Channel RAID Controller Unit
P//N SFCU1xx)
Standard Fibre Channel RAID
Controller
Netfinity Fibre Channel Failsafe
RAID Controller Opt. (P/N
01K7296)
Hot-swap Fan
Hot-swap Power GBIC Port
Hot-swap Fan
Supplies
• Contains a single hot-plug, RAID controller which provides a single host
Fibre Channel arbitrated loop and a single storage Fibre Channel arbitrated loop.
• Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).
• Integrated 10/100 Mbps Ethernet connector and RS-232 service support port.
• Performance optimised for 30 disk drives - supports optional FAStT
EXP500 Storage Expansion Units (P/N 00N71xx).
• Two hot-swap 350 W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap hard disk drives.
• Height is 3U (1U= 1.75 in or 44.45 mm.
•Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D industry standard rack. Mounting rails are included with the controller.
• Support long- and short-wave connections. Requires optional GBICs for each connection. GBICs not included.
FAStT200 HA Storage Server P/N 19K11xx
GBIC Port 10/100 Ethernet Port
RS-232
• Contains a single Short-Wave Fibre Connection (use cable group D) and six female 0.8 mm Very High Density Connection Interface (VHDCI) SCSI connectors
• Hot-Swap Redundant Fans and Power Supplies
• Optional Netfinity Fibre Channel Failsafe RAID Controller (P/N 01K7296) provides a redundant RAID controller and second Short-Wave Fibre Connection
(use cable group D)
• Attach directly to FAStT Host Adapter(s) (P/N 00N6881) or indirectly through
SAN Fibre Channel Managed Hub (P/N 35L1647) using cables from cable group
D.
• Height is 4 U (1 U=1.75 in. or 44.45 mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard Rack. Mounting rails are included with the controller.
• For optimum performance no more than two RAID controller units
P/N SFCU1xx should be attached to a single hub
Hot-swap Fan
Hot-swap Power GBIC Port
Hot-swap Fan
• Contains two hot-plug, RAID controllers. Each controller provides a single host Fibre Channel arbitrated loop and a single storage Fibre
Channel arbitrated loop.
• Integrated 10/100 Mbps Ethernet connector and RS-232 service support port.
• Performance optimised for 30 disk drives- supports optional FAStT
EXP500 Storage Expansion Units (P/N 00N71xx).
• Two hot-swap 350 W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap hard disk drives.
• Height is 3U (1U= 1.75 in or 44.45 mm.
•Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity Rack,
Netfinity NetBAY22 or 19-inch EIA-D industry standard rack. Mounting rails are included with the controller.
• Support long- and short-wave connections. Requires optional GBICs for each connection. GBICs not included.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
124
Updated
17/10/00
125
Updated
17/10/00
FAStT EXP500 Storage Expansion Unit
P/N 00N71xx
GBIC Ports
Hot-swap
Fan
Hot-swap
Power Supplies
Hot-swap
Fan
• Two hot-swap, 350 W auto-ranging, redundant power supplies.
• Redundant fans - two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over temperature, and other abnormalities.
• Ten drive bays - supports slim-high or half-high Fibre Channel hotswap hard disk drives.
• Height is 3U (1 U = 1,75 in. or 44.45 mm)
• Requires Netfinity Enterprise Rack or Expansion Cabinet, Netfinity
Rack, Netfinity NetBAY22 or 19-inch EIA-D Industry-Standard
Rack. Mounting rails are included with the controller.
• Requires optional GBICs for each connection. GBICs not included.
EXP300 Storage Expansion Unit P/N 19K11xx
SCSI Connectors
Hot-swap Power Supplies with
Integrated Fan
• Fourteen slim-high drive bays.
• Supports Ultra160 SCSI data transfer speeds - up to 160 MB/s.
• Single or dual SCSI bus configurations.
• Dual hot-swap 500 W redundant power supplies with integrated
fan assemblies.
• Height is 3 U (1 U=1.75 in. or 44.45 mm).
• Tower capability through optional Rack-to-Tower Conversion Kit.
• Requires Netfinity Enterprise Rack or Expansion Cabinet,
Netfinity Rack, Netfinity NetBAY22 or 19-inch EIA-D
Industry-Standard Rack. Mounting rails are included with
the controller.
SAN Fibre Channel Switch, 8 or 16 Ports
P/Ns 2109S08, 2109S16
8 port switch
GBIC Ports with GBICs GBIC Ports
16 port switch
GBIC Ports with GBICs
GBIC Ports
P/N 2019S08
P/N 2019S16
GBIC Ports with GBICs
GBIC Ports
• Each port delivers up to 100 MB/sec, full-duplex data transfer.
• Comes with 4 Short-Wave GBICs installed.
• Embedded Web browser configuration, management and
service.
• Support for Public Fibre Channel Arbitrated Loops.
• Optional power supply (P/N 09L5403) available.
• The 8 port switch is 1 U (1 U=1.75 in. or 44.45 mm) high and
the 16 port switch is 2 U (1 U=1.75 in. or 44,45 mm) high.
SAN Fibre Channel Managed Hub
P/N 35L1647
Serial Port 10/100 Ethernet Port
Power
Integrated Short-Wave
Optical Ports
GBIC Port
• High-speed performance utilising nonblocking switch-based technology.
• Simultaneous 100 MB/sec full duplex data transfers across all ports.
• Eight ports, one that is configurable with either a short-wave or longwave optical GBIC.
• Support for industry standard MIBs enabling standard SNMP management.
• Height is 1 U (1 U=1.75 in. or 44.45 mm) high.
Fibre / Fibre Configuration Examples
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing
Representative for assistance with your specific configuration requirements.
Fibre Channel
Adapter
1
(D)
FAStT500 Storage Server
(P/N 00N69xx)
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D)
(D)
FAStT500 Storage Server
(P/N 00N69xx)
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D)
(D)
(D)
Switch/Hub
(D or E)
Switch/Hub
Switch/Hub
(D or E)
Switch/Hub
(D or E)
(D)
FAStT500 Storage Server
(P/N 00N69xx)
FAStT500 Storage Server
(P/N 00N69xx)
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D)
Switch/Hub
(D or E)
FAStT500 Storage Server
(P/N 00N69xx)
Shaded boxes represent separate hosts.
1. FAStT Host Adapter (P/N 00N6881) supports shortwave connections only.
P = Primary path, S = Secondary/Redundant path
All storage connections require a secondary/redundant pathway in order to function properly.
(D), (E) = Cable Groups used, refer to chart on earlier page in this section for more information
P
FAStT EXP500
(D or E)
P
FAStT EXP500
(D or E)
P
FAStT EXP500
(D or E)
FAStT EXP500
P
P
FAStT EXP500
(D or E)
P
P
FAStT EXP500
FAStT EXP500
P
FAStT EXP500
(D or E)
S
S
S
S
S
S
S
S
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
126
Updated
17/10/00
127
Updated
17/10/00
Fibre / SCSI Configuration Examples
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing
Representative for assistance with your specific configuration requirements.
Fibre Channel
Adapter
1
(D)
RAID Unit (P/N SFCU1xx)
Std. RAID Controller
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D)
(D)
RAID Unit (P/N SFCU1xx)
Std. RAID Controller Opt. Failsafe
Controller
Fibre Channel
Adapter
1
(D)
(D)
(D or E)
RAID Unit (P/N SFCU1xx)
Std. RAID Controller
Switch/Hub
Switch/Hub
RAID Unit (P/N SFCU1xx)
Std. RAID Controller
Fibre Channel
Adapter
1
(D)
Switch/Hub (D or E)
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D or E)
(D)
Switch/Hub
(D or E)
RAID Unit (P/N SFCU1xx)
Std. RAID Controller Opt. Failsafe
Controller
Fibre Channel
Adapter
1
Fibre Channel
Adapter
1
(D)
Switch/Hub
Shaded boxes represent separate hosts.
1. Configured as two independent 5 HDD buses.
(D), (E) = Cable Groups used, refer to chart on earlier page in this section for more information
(A)
EXP200
(A)
EXP200
(A)
EXP200
(A)
EXP200
(A)
EXP200
IBM Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM
Marketing Representative for assistance with your specific configuration requirements
High-speed single-node Netfinity Fibre Channel Storage configuration offering performance, bandwidth & capacity
Netfinity Rack (P/N 9306900)
Tape Library Support
Netfinity Rack (P/N 9306900)
Monitor Compartment
(P/N 94G7444)
E74 Monitor
(P/N T32N3xx) (10U)
Four Port Console Selector Switch
(P/N 28L0542)
Keyboard Tray (P/N 28L4707) (2U)
Space Saver Keyboard
(P/N 28L36xx)
Short Wave
Fibre Cable
(Cable Group D)
Short Wave GBIC
(P/N 03K9308
Netfinity FAStT500 Storage
Server (P/N 00N69xx)
- Height (4U)
- Includes 19" Rack Installation
Hardware
Cable Selection
EXP500 - Cable Group D
Other Components
(Quantities will vary based on specific configurations)
FAStT Host Adapter
(P/N 00N6881)
EXP500 Storage Expansion Unit
(P/N 00N71xx)
- Height (3U)
- Up to 10 HDDs
- Cable Group D
(Up to 22 per FAStT500 Storage
Server P/N 00N69xx. Above 11 requires additional Mini Hubs to be installed in the Storage Server).
Server Node A
APC Smart-UPS 1400RMB
(P/N 14RIxxx) (3U)
Short Wave
Fibre Cable
(Cable Group D)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
Connector Types
68-pin - High Density Connector
0.8 mm - Very High Density Connection Interface VHDCI
Cable Group A (0.8 mm to 0.8 mm)
03K9310 - Netfinity 2 M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2 M Ultra2 SCSI Cable
37L7101- Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1 M Cable
03K9306 - Netfinity Fibre Channel 5 M Cable
03K9305 - Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10 kilometers (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
1
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
1. Four Netfinity Fibre channel Short-Wave GBIC’s (P/N 03K9308)
are included with SAN Fibre Channel Managed Hub (P/N 35L1647)
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
128
Updated
17/10/00
129
Updated
17/10/00
IBM Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements
High-speed single-node Netfinity Fibre Channel Storage configuration with Microsoft NT failover support and RAID redundancy for availability, performance, capacity
Netfinity Rack (P/N 9306900)
Monitor Compartment
(P/N 94G7444)
E74 Monitor
(P/N T32N3xx) (10U)
Four Port Console Selector Switch
(P/N 28L0542)
Keyboard Tray (P/N 28L4707) (2U)
Space Saver Keyboard
(P/N 28L36xx)
Short Wave
Fibre Cable
(Cable Group D)
Netfinity Rack (P/N 9306900)
Tape Library Support
Short Wave GBIC
(P/N 03K9308
Netfinity FAStT500 Storage
Server (P/N 00N69xx)
- Height (4U)
- Includes 19" Rack Installation
Hardware
Cable Selection
EXP500 - Cable Group D
Other Components
(Quantities will vary based on specific configurations)
Rack
- Blank Filler Kits (P/N 94G6670)
- Power Cable (P/N 94G7448)
- Console Cable (P/N 94G7447)
- Side Panel Kit (P/N 94G6669)
- Rack Attachment Kit
(P/N 94G7446)
FAStT Host Adapter
(P/N 00N6881)
FAStT Host Adapter
(P/N 00N6881)
Server Node A
)
Netfinity EXP500 Storage
Expansion Unit (P/N 00N71xx)
- Height (3U)
- Up to 10 HDDs
- Cable Group D
(Up to 22 per FAStT500 Storage
Server P/N 00N69xx. Above 11 requires additional Mini Hubs to be installed in the Storage Server).
APC Smart-UPS 1400RMB
(P/N 14RIxxx) (3U)
Short Wave
Fibre Cable
(Cable Group D)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
Connector Types
68-pin - High Density Connector
0.8 mm - Very High Density Connection Interface VHDCI
Cable Group A (0.8 mm to 0.8 mm)
03K9310 - Netfinity 2 M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2 M Ultra2 SCSI Cable
37L7101 - Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1 M Cable
03K9306 - Netfinity Fibre Channel 5 M Cable
03K9305 - Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10 kilometers (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
1. Four Netfinity Fibre channel Short-Wave GBIC’s (P/N 03K9308)
are included with SAN Fibre Channel Managed Hub (P/N 35L1647).
IBM Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements
Cluster Solution
High speed multiple node Microsoft Cluster Service (MSCS) and Netfinity Fibre Channel Storage configuration offering data protection and RAID redundancy.
Public Lan
Netfinity Rack (P/N 9306900)
Monitor Compartment
(P/N 94G7444)
E74 Monitor
(P/N T32N3xx) (10U)
Four Port Console Selector Switch
(P/N 28L0542)
Keyboard Tray (P/N 28L4707) (2U)
Space Saver Keyboard
(P/N 28L36xx)
Short Wave
Fibre Cable
(Cable Group D)
Netfinity Rack (P/N 9306900)
Tape Library Support
Standard Fibre
Channel RAID
Controller
Netfinity Fibre Channel
Failsafe RAID Controller
(P/N 01K7296)
- SAN Fibre Channel Managed
Hub (P/N 35L1647).Qty. 1
- Height (1U)
25 ft. Ethernet
Crossover Cable
1
Onboard or
Supported LAN
Adapter
Netfinity 10/100
Ethernet Adapter
(P/N 34L1501)
FAStT Host
Adapter
(P/N 00N6881)
Onboard RAID or
ServeRAID-3x
(NOS Mirroring)
Cable Selection
EXP200 - Cable Group A
Mirrored Quorum Disks
Netfinity Fibre Channel RAID
Controller Unit (P/N SFCU1xx)
- Height (4U)
- Six 0.8 mm VHDCI
Female Connectors
- LVDS
- Includes 19" Rack Installation
Hardware
Server Node B
Netfinity 10/100
Ethernet Adapter
(P/N 34L1501)
FAStT Host
Adapter
(P/N 00N6881)
Supported Storage Expansion Units
In Any Combination
(Up to six per Controller
P/N SFCU1xx)
Netfinity EXP200 (P/N 00N6xxx)
- Height (3U)
- Up to 10 HDDs
- Two 0.8 mm VHDCI
Female Connectors
- Cable Group A
- Switch 1 "off"
Other Components
(Quantities may vary based on specific configurations)
Rack
- Blank Filler Kits (P/N 94G6670)
- Power Cable (P/N 94G7448)
- Console Cable (P/N 94G7447)
- Side Panel Kit (P/N 94G6669)
- Rack Attachment Kit
(P/N 94G7446)
Server
- Each server requires two
identical HDDs for NOS
mirroring
Onboard or
Supported LAN
Adapter
Onboard RAID or
ServeRAID-3x
(NOS Mirroring)
Server Node A
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
Connector Types
68-pin - High Density Connector
0.8 mm - Very High Density Connection Interface VHDCI
Cable Group A (0.8 mm to 0.8 mm)
03K9310 - Netfinity 2 M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2 M Ultra2 SCSI Cable
37L7101 - Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1 M Cable
03K9306 - Netfinity Fibre Channel 5 M Cable
03K9305 - Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10 kilometers (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
1
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
1. Microsoft Cluster Server (MSCS) requires a private interconnect
between clustered nodes. A 25 ft. Ethernet crossover cable is
shown but not available from IBM as a separate option. Contact
your IBM Business Partner for assistance.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
130
Updated
17/10/00
131
Updated
17/10/00
IBM Netfinity Fibre Array Solutions
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements
Advanced high-speed high-availability multiple node Microsoft Cluster Service (MSCS) and fully redundant Netfinity Fibre
Channel Storage configuration offering the highest levels of data protection and availability and access to data
Public Lan
See Other Components-
Server
25 ft. Ethernet
Crossover
Cable
1
Netfinity Rack (P/N 9306900)
Monitor Compartment
(P/N 94G7444)
E74 Monitor
(P/N T32N3xx) (10U)
Four Port Console Selector Switch
(P/N 28L0542)
Keyboard Tray (P/N 28L4707) (2U)
Space Saver Keyboard
(P/N 28L36xx)
Netfinity 10/100
Ethernet PCI Adapter 2
(P/N 34L1501)
Onboard RAID or
ServeRAID-3x
(NOS Mirroring)
FAStT Host Adapter
(P/N 00N6881)
Server Node B
FAStT Host
Adapter
(P/N 00N6881)
Short Wave
Fibre Cable
(Cable Group D)
Netfinity Rack (P/N 9306900)
Tape Library Support
Standard Fibre
Channel RAID
Controller
Netfinity Fibre Channel
Failsafe RAID Controller
(P/N 01K7296)
Cable Selection
EXP200 - Cable Group A
Mirrored Quorum Disks
- SAN Fibre Channel Managed
Hub (P/N 35L1647).Qty. 2
- Height (1U)
Netfinity Fibre Channel RAID
Controller Unit (P/N SFCU1xx)
- Height (4U)
- Six 0.8 mm VHDCI
Female Connectors
- LVDS
- Includes 19" Rack Installation
Hardware
Supported Storage Expansion Units
In Any Combination
(Up to six per Controller
P/N SFCU1xx)
Netfinity EXP200 (P/N 00N6xxx)
- Height (3U)
- Up to 10 HDDs
- Two 0.8 mm VHDCI
Female Connectors
- Cable Group A
- Switch 1 "off"
Netfinity 10/100
Ethernet PCI Adapter 2
(P/N 34L1501)
FAStT Host Adapter
(P/N 00N6881)
Other Components
(Quantities may vary based on specific configurations)
Rack
- Blank Filler Kits (P/N 94G6670)
- Power Cable (P/N 94G7448)
- Console Cable (P/N 94G7447)
- Side Panel Kit (P/N 94G6669)
- Rack Attachment Kit
(P/N 94G7446)
Server
- Each server requires two
identical HDDs for NOS
mirroring
- Public LAN access through an
onboard or supported LAN
adapter
Onboard RAID or
ServeRAID-3x
(NOS Mirroring)
FAStT Host
Adapter
(P/N 00N6881)
Server Node A
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U))
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
APC Smart-UPS 3000RMB
(P/N 30RIxxx) (3U)
Connector Types
68-pin - High Density Connector
0.8 mm - Very High Density Connection Interface VHDCI
Cable Group A (0.8 mm to 0.8 mm)
03K9310 - Netfinity 2 M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2 M Ultra2 SCSI Cable
37L7101 - Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
36L9973 - Netfinity Fibre Channel 1 M Cable
03K9306 - Netfinity Fibre Channel 5 M Cable
03K9305 - Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters (0.31 miles)
Cable Group E (Long-Wave Fibre)
Customer supplied long-wave cable of up to 10 kilometers (6.2 miles)
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
1
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
1. Microsoft Cluster Server (MSCS) requires a private interconnect
between clustered nodes. A 25 ft. Ethernet crossover cable is
shown but not available from IBM as a separate option. Contact
your IBM Business Partner for assistance.
Netfinity Availability Extensions for NT 4.0
MSCS Four Node Cluster
Note: - The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Customer specific
MSCS configurations require IBM approval. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements.
CISCO Ethernet LAN Switch
4
AdditionalPower Supply
(P/N 09L5403)
SAN Fibre Channel Switch(P/N 2109S08)
Cluster Interconnect
Node 1
Node 2
Node 3
Node 4
Node 1
Node 2
Node 3
Node 4
Onboard Advanced
System Management
Adapter
PCI Slot 7
Netfinity 10/100
Ethernet PCI Adapter 2
(P/N 34L1501)
PCI Slot 6
Netfinity 10/100
Ethernet PCI Adapter 2
(P/N 34L1501)
Memory: 2 x (P/N 20L0247)
1 x Expansion Card (P/N
28L4454
PCI Slot 4
Netfinity FAStTHost
Processors
7 X (P/N 10K2166),
1 X Kit (10K2337, PCI Slot 3
Adapter
(P/N 00N6881)
1 X Filter (10K2335)
Netfinity FAStTHost
Adapter
(P/N 00N6881)
PCI Slot 1
Mirrored Hot-Swap HDD
2 x P/N 37L7206
ServeRAID-3HB
Ultra2 SCSI Adapter
(P/N 36L6086)
Server Nodes 1... 4
Netfinity 8500R (P/N 18RYNxx)
Single Occurrence Options
(Any node 1...4)
PCI tape controller included with library
Rack B
Tape
FC Switch
FC Switch
EXP200
EXP200
EXP200
8500R
8500R
5000 UPS
5000 UPS
Public
LAN
AdditionalPower
Supply (P/N
09L5403)
Node 1
Node 2
Node 3
Node 4
RAID 5
Minimum 3 HDDs
plus
1 Hot-spare
IBM
Cable Group D
2
(Short-Wave
Fibre)
Mirrored
Quorum
Disks
SAN Fibre Channel Switch (P/N 2109S08)
Standard Fibre
Channel RAID
Controller
SAN Fibre Channel Switch
2109-S08- Qty. 2
- Height (2U)
-- Includes Four Short Wave
- GBICs per Switch
- Includes 19" Rack
Installation Hardware
- Optional Short Wave
GBICs (P/N 03K9308).
-Optional Additional Power
Supply (P/N 09L5403
Cable Group D
2
(Short-Wave Fibre)
Netfinity Fibre Channel
Failsafe RAID Controller
(P/N 01K7296)
Fibre Channel RAID
Controller Unit
(P/N SFCU1xx)
- Height (4U)
- Six 0.8 mm VHDCI
Female Connectors
- Ultra2 SCSI
- Includes 19" Rack
Installation Hardware
Cable Group A
2
Rack A
RAID Controller
EXP200
EXP200
EXP200
8500R
Flat Panel Monitor
Keyboard
Console Switch
8500R
5000 UPS
5000 UPS
Optional
DLT Tape Library
Netfinity EXP200
(P/N 00N6xxx)
- Height (3U)
- Up to 10 HDDs
(Example: 10 x 18.2 GB P/N
37L7205)
- Two 0.8 mm VHDCI Female
Connectors
- Up to six (>1 Terabyte) per
Controller P/N SFCU1xx
- Cable Group A
(Ultra2 0.8 - 0.8mm)
Connector Types
0.8 mm - Very High Density Connection Interface VHDCI
Cable Group A (0.8 mm to 0.8 mm)
03K9310 - Netfinity 2 M Ultra2 SCSI Cable
03K9311 - Netfinity 4.2 M Ultra2 SCSI Cable
037L7101 - Netfinity 20 M Ultra2 SCSI Cable
Cable Group D (Short-Wave Fibre)
03K9306 - Netfinity Fibre Channel 5 M Cable
03K9305 - Netfinity Fibre Channel 25 M Cable
Customer supplied short-wave cable of up to 500 meters (0.31 miles)
.
GBIC
03K9308 - Netfinity Fibre Channel Short-Wave GBIC
1
03K9307 - Netfinity Fibre Channel Long-Wave GBIC
(1) Four Fibre Channel Short-Wave GBICs are included with SAN
Fibre Channel Switch P/N 2109S08
(2) Cable length requirements are dependant on component placement within the rack suite. The parts list for this example reflects requirements for the illustrated configuration only. Cable length requirements for other configurations are best determined by using the Netfinity Rack Configurator which is downloadable from
Web site www.ibm.com/pc/us/products/server/download.html
(3) A tape library is optional and attaches to any one of the nodes within the cluster.
(4) Please contact your NAE Specialist in Advanced Technical
Support about the most up-to-date Cluster interconnect requirements.
Additional Information and Configuration
Tools Available
See "Information Sources" section for Clustering, Server Paper
Configurator, ConfigXpert and Netfinity Rack Configurator URLs
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
132
Updated
17/10/00
133
Updated
17/10/00
Netfinity Availability Extensions for NT4.0
MSCS Four Node Cluster - Parts List
1
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Customer specific MSCS configurations require IBM approval. Contact your IBM Business Partner or IBM Marketing Representative for assistance with your specific configuration requirements.
Part
Number
Description
18RYNxx Netfinity 8500R-700 MHz/2 Mb L2, 512k Mb RAM
10K2335 Netfinity 4x Accelerator Filter
10K2337 Netfinity Mezzanine Expansion Kit
10K2166
Netfinity 8500R 700 MHz/ 2 Mb Upgrade with Pentium III Xeon
Processor
37L7206 36.4 GB 10K-4 Ultra160 SCSI Hot-Swap SL HDD
36L6086 IBM Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
34L1501 Netfinity 10/100 Ethernet PCI Adapter 2
00N6881 Netfinity FAStT Host Adapter
37L0xxx Netfinity EXP200 350 W Redundant Power Supply II
20L0247 256 MB ECC SDRAM RDIMM II Memory
28L4454 Netfinity Memory Expansion Card
02K65xx UltraSlim 56 W AC Adapter
Storage Subsystems
Qty.
28 7 per node, total of 8 SMP processors per node
8
8
4
8
4
4
8
4
4
4
4
Cluster Nodes
Allows expansion to 8 SMP processors.
Usage
2 per node, mirrored NOS, attached to ServeRAID
1 per node for NOS HDDs. Install in PCI slot 1
Public LAN - slot 6/ interconnect slot 7
2 per node, each attaches to one of the two Fibre Hubs. Install in PCI slots 3 and 4.
1 per node, provides power supply redundancy for each node
2 per node to increase memory to 1GB
1 per node, to expand for additional memory
Provides an independent backup power source for systems management
2109S08 SAN Fibre Channel 8 Port Switch
09L5403 Additional Power Supply
03K9308 Netfinity Fibre Channel Short-Wave GBIC
SFCU1xx Netfinity Fibre Channel RAID Controller Unit
01K7296 Netfinity Fibre Channel Failsafe RAID Controller
00N6xxx Netfinity EXP200 Storage Expansion Unit
37L7206 Netfinity EXP 36,4 GB 10K-4 Ultra160 SCSI Hot-Swap HDD
37L7204 Netfinity EXP 9.1 GB 10K-4 Ultra160 SCSI Hot-Swap HDD
00N79xx DLT Tape Library
37L6862 APC Smart-UPS 5000RMB
2
Storage Cables
03K9306 Netfinity Fibre Channel 5 M Cable
03K9310 Netfinity 2 M Ultra2 SCSI Cable
03K9311 Netfinity 4.2 M Ultra2 SCSI Cable
-
-
Internet Components
CISCO Ethernet Switch
4
Standard CAT5 Cables
4
Other Non-Rack
Customer
Supplied
Ethernet System Management Cables
28L36xx Space Saver II Keyboard (1U)
11AG1xx Flat Panel Monitor
37L6888 Flat Panel Monitor Adapter
1
1
1
2
Redundant short-wave (SW) connections from each of four nodes to Netfinity Fibre
Channel RAID Controller Unit. Each switch includes four standard SW BBICs
Hot-Swap redundant power supply for SAN Fibre Channel Switch 2
10 8 for adapters and 2 for switches
1 Attaches to 6 EXP200s, with Failsafe Controller - two attachments to the hubs
1 Installs in Controller Unit, providesredundant path to EXP200s
6 One LVDS attachment to RAID Controller Unit per EXP200, max, of 60 HDDs
58 A minimum of four RAID 5 HDDs( 3 plus a hot-spare) with a maximum of 58
2
1
4
Mirrored Quorum HDDs
Tape subsystems are optional. The 3502R14 includes a 3 M cable and PCI controller
Power connections are intra-rack only
2
10 2 x 4 nodes to hub, 2 hub to RAID controllers
3
3
RAID controller to EXP200s
RAID controller to EXP200s
1
8
8
Standard configuration supports interconnection up to 4 nodes
2 per node for cluster interconnect/network access
Provides interconnection between Advanced System Management Adapters.
Includes TrackPoint
Rack / Related
930842P Netfinity Enterprise Rack
930842X Netfinity Enterprise Expansion Cabinet
28L4707 Netfinity Rack Keyboard Tray
28L0542 Netfinity Console Selector Switch (4-port)
1
1
1
1
Provides 42U of mounting space per rack
Provides 42U of additional mounting space
Allows keyboard 28L3640 to be stowed in a ready-to-use position
Connects 4 nodes to 4-port switch
94G7448 Power Cable - TypeC12
94G7447 NetBAY 12ft. Console Cable Set
Netfinity Availability Extensions for MSCS
3
36L9891 Netfinity Availability Extensions for MSCS (3 node)
5
36L9892 Netfinity Availabilty Extensions for MSCS (1 additional node)
5
1
1
15 Provides power cables for UPS attachment to installed components
4 Attaches each node to the console switch.
License for first 3 nodes
License for last additional node (4th)
1. Cable, power, cooling and weight are dependent on component placement within the rack and rack suite. This parts list reflects one possible configuration of the listed components. Prior to ordering, you should configure your specific environment using the Netfinity Rack Configurator. The Netfinity Rack Configurator is downloadable from URL: www.ibm.com/pc/us/products/server/download.html.
2. Pre-installation site planning information: P/N 34L6862 contains four L6-30P, 220V 30 amp circuitry.
3. Consists of Netfinity Availability Extensions for MSCS software licenses (support for up to four nodes) and installation services for the complete Netfinity solution being installed. Netfinity Availabilty
Extensions for MSCS is available through IBM Direct as a solution offering and is designed for installation by trained service personnel. Please contact your IBM representative for ordering information.
4. Please contact your IBM representative about the most up-to-date Cluster Interconnect requirements.
5. Netfinity Availability Extensions for MSCS(NAE) require NAE Service Pack 3.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
134
Updated
17/10/00
135
Updated
17/10/00
IBM Netfinity NetBAY3/NetBAY3E Stackable
Enclosur e
Sample
Configuration
Installation Guidelines:
1) Locate power units with line cords in the bottom enclosure.
2) Install components starting from the bottom; start with the heaviest device.
3) If nothing is installed in the enclosure, attach the rear blank panel for stability.
Netfinity 7600
Networking
EXP200
UPS
NetBAY3
19 in.
36 in.
914 mm
36 in.
6 in.
36 in.
914 mm
3.2 ft
2
19 in x 24 in.
483 mm x 610mm
26 in.
Service clearance
Front
6 in.
20 in.
152 mm
508 mm
Operational clearance
(1.7 ft.X 3 ft.= 5 ft.
2
)
(508 mm x 914 mm = 0.46 m
2
(7.6 ft. X 8.2 ft.= 62.3ft
2
)
)
(2316 mm x 2499 mm = 5.79 m
2
)
36 in.
914 mm
Netfinity 7600
1
Supported Devices
Servers
Netfinity 7100
Netfinity 7000-M10
2
Netfinity 5500
Netfinity 5500-Mxx
Netfinity 8500R
3
Expansion
4
Netfinity EXP200
Tape Units
4
NetMEDIA
Power
4
APC Smart-UPS 1400RMiB
APC Smart-UPS 3000RMiB
200-240V PDU
Networking
4
2210 Multiprotocol Router
8230 T-R Controlled Access Unit
8235 Dial-in Access to LANs
8237 Ethernet Hub
8238 Nways T-R Hub
8271 Ethernet Switch
8272 T-R Switch
8285 ATM Switch
NetBAY3
X
X
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NetBAY3E
-
-
X
-
-
-
X
X
X
X
X
X
X
X
X
X
X
X
X
Size (U)
-
-
-
-
-
3
3
3
3
1
1, 2
2
1
2
2
2
2
3
Weight(lb/kg)
120/54.4
120/54.4
160/72.6
120/54.4
123.4/56.0
170/77.1
80/36
37/17
55/24.9
112/50.8
8/3.6
7/3.2, 20/9.1
15/6.8
8/3.6
10/4.5
11/5.0
16/7.3
16/7.3
70/31.8
Max/Enclosure n/a n/a n/a n/a n/a n/a
1
1
1
1
1
3, 1
1
3
1
1
1
1
1
Max/Stack
1
1
1
1
1
1
3
3
1
1
1
9, 3
3
9
3
3
3
3
3
1. Netfinity 7600 systems are rack mountable and ship without a keyboard or mouse. In order to be utilised with a NetBAY3 or in a tower configuration, optional 8Ux28D Rack-to-Tower Kit
(P/N 28L4705) must be installed.
2. Netfinity 7000-M10 systems are rack mountable and ship without a keyboard. In order to be utilized with a NetBAY3 or in a tower configuration, optional Rack-to-Tower Conversion Kit
(P/N 01K8005) must be installed.
3. Netfinity 8500R systems are rack mountable and ship without a keyboard. In order to be utilized with a NetBAY3E or in a tower configuration, optional Rack-to-Tower Kit (P/N 28L4705) must be installed.
4. NetBAY3 and NetBAY3E do not contain a top cover and therefore require a supported server as the top component in a stack
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
136
Updated
17/10/00
137
Updated
17/10/00
IBM Netfinity NetBAY3/3E Stackable Enclosure
Tower Models
Monitor/
Keyboard
1
Add Options
Single NetBay and Casters
Add Options
Max Configurations
Monitor/
Keyboard
1
Netfinity 5500,
5500 Mxx
Std. NetBAY3
2
Skid Pads
Monitor/
Keyboard
1
Netfinity 7100
Casters
(P/N 10L6913)
NetBAY3
(P/N 10L6912)
- and -
Casters
(P/N 10L6913)
Netfinity 5500,
5500 Mxx
Std. NetBAY3
Netfinity 7100
NetBAY3
Up to Two Additional
NetBAY3s
(P/N 10L6912)
Up to Two Additional
NetBAY3s
(P/N 10L6912)
Netfinity 5500,
5500 Mxx, 7100
5
,
7000 M10
NetBAY3
NetBAY3
NetBAY3
Caster Stabiliser
Monitor/
Keyboard
1
Glide Feet
Rack Models
Netfinity 7000
M10
Netfinity 7000 M10
Rack-to-Tower
Conversion Kit
2
(P/N 01K8005)
- and -
NetBAY3
(P/N 10L6912)
Netfinity 7000
M10
NetBAY3
Netfinity 5500,
5500 Mxx, 7100,
7600
Glide Feet
Monitor/
Keyboard
1
Netfinity 5500,
5500 Mxx
Netfinity 7100,
7600
Netfinity 8Ux24D
Rack-to-Tower Kit
3
(P/N 37L6860)
-OR-
Netfinity 5500,
5500 Mxx, 7100,
7600
Up to Two Additional
NetBAY3s
(P/N 10L6912)
Netfinity 5500,
5500 Mxx, 7100
5
,
7600
5
NetBAY3
NetBAY3
NetBAY3
NetBAY3
Caster Stabiliser
Monitor/
Keyboard
1
Netfinity 8500R
Netfinity 8500R
Netfinity 8Ux28D
Rack-to-Tower Kit
4
P/N (28L4705)
Up to Two Additional
NetBAY3Es
(P/N 36L9701)
Netfinity 8500R
5
NetBAY3E
NetBAY3E
NetBAY3E
NetBAY3E
1. Netfinity rack models ship without a keyboard or mouse. Those supported for stacking on a NetBAY3 or NetBAY3E must have a rack-to-tower kit installed.
2. Netfinity 7000 M10 Rack-to-Tower Conversion Kit P/N 01K8005 includes casters which can also be used with a NetBAY3.
3. Netfinity 8Ux24D Rack-to-Tower Kit P/N 37L6860 includes casters, caster stabiliser, glide feet and a single NetBAY3.
Either NetBAY3 or the glide feet may be utilised but not both.
4. Netfinity 8Ux28D Rack-to-Tower Kit (P/N 28L4705) includes casters, caster stabiliser, and a single NetBAY3E.
5. Netfinity 7100, 7600 and 8500R are not supported for installation with three empty NetBAY enclosures without a caster stabiliser. The caster stabiliser is included in Rack-to-Tower Kits P/N 37L6860 and P/N 28L4705 and is recommended for use with any quantity of NetBAY enclosures.
Caster Stabiliser
IBM Netfinity Rack Cabinet and Options
Note: For a robust rack configurator application access URL http://www.pc.ibm.com/europe/configurators
Rack Enclosure
P/N 9306900
1
,
P/N 9306910
1
1st Console
Switch, if no monitor compartment
C
2nd PDU
14
13
12
11
10
9
8
7
6
20
19
18
17
16
15
5
4
3
2
1
30
29
28
27
A 26
25
24
23
22
21
34
33
32
31
38
37
36
35
42
41
40
39
B
42U
Vertical Rack Mount Area
22U
D
Special Side Wall
Compartments
1st PDU
1st Console
Switch, if no monitor compartment, or 2nd PDU
A 14
13
12
11
10
9
8
7
6
22
21
20
19
18
17
16
15
5
4
3
2
1
1. P/N 9306900 includes a glass front door and no side panels.
P/N 9306910 includes a perforated front door and side panels.
NetBAY22
P/N 9306200
Mounting Location for Display and
Keyboard
E
D
1st PDU
Direct Rack Mount
1
: Units Supported Examples
IBM Servers
Netfinity 4000R xSeries 330 xSeries 340 / Netfinity 4500R xSeries 230 / Netfinity 5100 xSeries 240 / Netfinity 5600
Netfinity 6000R
Netfinity 7100
Netfinity 7600
Netfinity 8500R
All Models
All Models
All Models
Rack Models
Rack Models
All Models
Rack Models
All Models
All Models
IBM Storage Expansion Units
1U
3
1U
4
3U
5U
5U
5U
8U
8U
8U
2
Netfinity EXP15
Netfinity EXP200
Netfinity EXP300
P/N SE2RXxx
P/N 00N6xxx
P/N 19K11xx
IBM Fibre Solutions
3U
3U
3U
RAID Controller Unit
FAStT500 Storage Server
FAStT500 EXP500 Expansion Unit
SAN FC Managed Hub
8-port Switch
16-port Switch
FAStT200 Storage Server
P/N SFCU1xx
P/N 00N69xx
P/N 00N71xx
P/N 35L1647
P/N 2109S08
P/N 2109S16
P/N 19K11xx
IBM Tape Unit Enclosures
NetMEDIA Enclosure P/N 03K8756
IBM Networking Products
1U
2U
3U
4U
4U
3U
1U
3U
Dial-in Access to LANS 8235-03x 1U
New Rack Options
09N4290
09N4291
09N4293
37L68xx
1
37L68xx
2
37L6885
NetBAY 1x4 Console Switch
NetBAY 2x8 Console Switch
NetBAY 7-foot Console Cable Set
NetBAY Server Dual Cord Power Distribution Unit
NetBAY Rack Power Distribution Unit
NetBAY Single Phase Front-End Power Distribution Unit
37L6883
37L6887
NetBAY Single Phase Front-End Power Distribution Unit with 120V Line Cord
NetBAY Three Phase Front-End Power Distribution Unit
1. Where xx provides a country line cord: 65=US, 67=EUR, 69=Den/Switz, 71=Israel, 73=Italy,
65=Saudi Arabia, 75=S/Africa, and P/N 06P6027=UK.
2. Where xx provides a country line cord: 66=US, 68=EUR, 70=Den/Switz, 72=Israel, 74=Italy,
66=Saudi Arabia, 76=S/Africa, and P/N 06P6028=UK.
1. Mounting hardware provided with product
2. Netfinity 8500R requires installation of extension kit P/N 36L9703 or 36L9702 when installed in a Rack 9306900/910 or NetBAY22
P/N 9306200 respectively for proper rear door closure clearance.
3. To provide adequate cooling, a blank filler panel should be placed on the front of any unused rack space. If non-IBM racks are to be used, assure that both front and rear doors offer approximately 60% open area uniformly distributed and in line with installed servers. A clearance of 51 to 64-mm (2 to 2-1/2 inches) must be maintained between the front door and the system unit’s front bezel. The rear door must maintain the same or greater distance. Clearance between the EIA mounting rails and rack side covers must be less than 13-mm (1/2-inch) to prevent air recirculation from back to front. Non-rack installations are not supported.
4. To provide adequate cooling, Blank Filler Panel Kit (P/N 94G6670) should be placed on the front of any unused rack space. If non-IBM racks are to be used, assure that both front and rear doors offer a minimum of
48% open area uniformly distributed and in line with installed servers. A clearance of 51 to 64-mm (2 to 2-1/2 inches) must be maintained between the front door and the system unit’s front bezel. The rear door must maintain the same or greater clearance. Clearance between the EIA mounting rails and the rack side covers must be less than 13-mm (1/2 inch) to prevent air re-circulation from back to front. Non-rack or
NetBAY3E installations are not supported.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
138
Updated
17/10/00
139
Updated
17/10/00
Keyboard/Pointer/Monitor & Switch ... all in 3U
Console Switch
• Mounts to rear flanges
• Shares 3U space with display, keyboard and tray
Keyboard Tray Components
• P/N 28L4707 Rack Keyboard Tray
• P/N 37L6888 Flat Panel Monitor Rack Mount Kit II
• P/N 28L36xx Space Saver Keyboard
• P/N 11AG1xx T54A Flat Panel Color Monitor
Front
Keyboard Tray
Mounting Flanges
Slide-Out and Flip-Up
Optional Accessories
Part
Number
Mounting Support
94G7442
36L9702
36L9703
06P6010
Fixed Shelf: width x depth= (439 mm x 663mm) 17.3 in. x
26.1 in max. weight= (45 kg)100lbs.
Netfinity NetBAY22 Rack Extension Kit installs on the rear of a 9306200
1
.
Netfinity Rack Extension Kit installs on the rear of a Rack P/N 9306900 or 9306910
1
.
2 to xx U
Netfinity Rack Front Door Kit
Rack Space
-
-
-
Units Supported
IBM Networking Products
8222-008, 016
8225-003
Nways Enet Wkgp Hub
Ethernet Hub
Netfinity NetBAY22 9306200
Netfinity Rack 9306900, 9306910
Netfinity Rack 9306900
2U
2U
Part
Number
Description Console Support Devices Supported
Devices Height Part Number
Monitors
94G7444 Monitor compartment One monitor and one console
E51 Color Monitor
E54 Color Monitor
E74 Color Monitor
G78 Color Monitor
9U
9U
10U
10U
T3347xx
31H2Nxx
T32N3xx
T274Axx
11AG1xx T54A TFT LCD Color Monitor 3U
Keyboards/Mouses
2
28L4707 Netfinity Rack Keyboard Tray
One flat panel display and one space saver keyboard, and one keyboard mouse
Space Saver Keyboard
3, 4
TrackPoint IV 104-Key 3
Tower Model Keyboards
5
1U
1U
1 to 2U
28L36xx
01K1260
-
Monitors
T54A flat panel monitor
6
Flat Panel Monitor Mount Kit II
7
3U
11AG1xx
37L6888
37L6888
94G7445
28L0542
Flat Panel Monitor Rack Mount Kit
Supports installation of a flat panel monitor into tray 28L4707
T54A Flat Panel Monitor
6
Console Server Selector Switch (8-port, Tier up to 64)
Netfinity Console Server Selector Switch (4port)
Mounts behind monitor compartment or in rack side
When used with keyboard tray 28L4707 and flat panel kit 37L6857 it can also be installed behind the keyboard tray.
Console Cable Set - 12ft. (366 m)
Monitors
-
11AG1xx
94G7447
94G7447 NetBay Console Cable Set- (3.66 m) 12 ft.
Attaches server to console switch
Console Server Selector Switch (8-port)
Netfinity Console Server Selector Switch (4-port) -
94G7445
28L0542
1.Expands current racks for better cable management or to accomodate systems requiring greater installation depth.
2. Check system sections for support of desired keyboards, mouse and monitors.
3. Advanced TrackPoint IV features are not supported by Netfinity servers or rack console switches.
4. Space saver keyboards may be stowed in a ready-to-use position within tray 28L4707.
5. Tower models of Netfinity servers includes keyboards, which are supported by both keyboard trays and console switches. These are not space saver keyboards.
6. Installation in a Netfinity Rack Keyboard Tray P/N 28L4707 requires Netfinity Flat Panel Monitor Rack Mount Kit P/N 37L6888. A space saver keyboard may coexist within keyboard tray P/N 28L4707.
7. When installed in Netfinity Rack Keyboard Tray P/N 28L4707 a flat panel monitor and space saver keyboard may coexist in the tray. Hardware is included for mounting a console selector switch to the rack directly to the rear of the tray thus sharing the same 3U space. See the Keyboard/Pointer/Monitor & Switch diagram above.
Part
Number
Power Support Rack Space Comments
2PDUxxx
1
14RIxxx
30RIxxx
94G7448
1
1
200-240V 16a Power Distribution Unit
1400VA UPS 220-240V EMEA/
AP
3000VA UPS 220-240V EMEA/
AP
Power Cable
Type Connectors
C12 IEC 320-C13 to IEC 320-C14
--
3U
3U
-
10 IEC 320-C13 outlets
Mounts in rack side wall D,C
4 IEC 320-C13 outlets
8 IEC 320-C13 and 1 C19
Length
(3.66 m) 12 ft.
Part
Number
Miscellaneous Rack Space Comments
94G6670
Blank Filler Panel Kit
1U panel (qty. = 2)
3U panel (qty. =1)
5U panel (qty. = 1)
1U + 1U
3U
5U
Use as required to fill empty space in the vertical rack mount area.
Note: You can select up to two power units per rack. Select the optional Power Cables when the standard cable is not long enough or has incompatible power plug.
1. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland,
UKM=United Kingdom, EUR=Europe.
Single Cabinet or Multi-Rack Suite Options using Rack Cabinet P/N 9306900
Side Panel Kit (94G6669)
1
Single Stand-alone
IBM Netfinity Rack Cabinet
2 Locking Side
Panels
Rack Attachment Kit (94G7446)
2
Bolts, Brackets, and Trim Pieces front and side stabilisers required
Multi-Rack Suites -- 2 to 8 racks
1. Supported on Rack Cabinet P/N 9306900 only. Included with Rack
Cabinet P/N 9306910.
2. Supported on P/Ns 9306900 and 9306910 side stabilisers not required
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
140
Updated
17/10/00
141
Updated
17/10/00
36 in.
914 mm
Dimensions for
NetBAY22
P/N 9306200
90 in.
2286 mm
Side Stabilizers not required on a
NetBAY22
P/N 9306200
Netfinity Rack Cabinet P/Ns 9306900, 9306910 and NetBAY22 P/N 9306200 Dimensions
42 in.
1067 mm
23.6 in.
600 mm
26 in.
660 mm
30 in.
762 mm
36 in.
914 mm Front View
25.5 in.
648 mm
42U
22U
Top View
5.6 ft.
.52m
2
2
(23.5 in. x 34.in.)
(597mm x 864mm)
34.5 in.
876 mm
30 in.
762 mm
60 in.
1524 mm
Side Stabilisers not required on a
NetBAY22
P/N 9306200 Service Clearance
(8 ft. x 10.4 ft. = 83.2 ft.
2 )
(2438 mm x 3170 mm = 7.73 m 2 )
Front
Operational Clearance
(3.5 ft. x 7.5 ft. = 26.25 ft.
2
)
(1067 mm x 2286 mm = 2.44 m
2
)
12 in.
305 mm
Dimensions for
NetBAY22
P/N 9306200
81.5 in.
2070 mm
46.25 in.
1175 mm
EIA 310-D standard 19-inch, type A cabinet
1U = (44.45 mm)1.75 inches
Weight (lb/kg)
Empty rack
Max load
Total
31.8 in. (807.7 mm)
(surface to surface)
Rack Cabinet P/Ns 9306900,
9306910
Moveable Stationary
276/125
824/374
1100/499
276/125
1424/646
1700/771
NetBAY22 P/N 9306200
Moveable or Stationary
182/83
746/338
928/421
Internal Dimensions
Top View
Front to lock = 1.4 in.
(35.6 mm) to door = 2.3 in.
(58.4 mm)
28.125 in.
(714.4 mm)
(inside flange to inside flange) to frame = 2.2 in.
(55.9 mm) to glass = 3.0 in.
(76.2 mm)
Switch Arrangements
Tiering
Console
Mounting flange dimensions and universal hole spacing defined by
EIA 310 for 19-inch racks
Single Switch
Console
Primary Switch
Switch
Secondary Switch Secondary Switch console cable set console cable set
Up to 4 or 8 Servers
(depending on switch type)
Up to 64 Servers
(depending on switch type)
Appendix A: Tape Drive Attributes
Form Factor
LEGEND
HH: Half High - approx. height of 1.6”
SL: Slim Line - approx. height of 1”
FH: Full High
Description
01K1282
09N4041
00N7991
01K1319
09N4042
31/08/00 12/24GB DDS/3 4mm Internal Tape Drive
-
-
31/08/00 10/20GB NS Internal SCSI Tape Drive
-
12/24GB DDS/3 4mm Internal Tape Drive
20/40 GB DDS/4 4-mm Internal Tape Drive
10/20GB NS Internal SCSI Tape Drive
01K1325 20/40GB 8mm Internal SCSI Tape Drive
01K1320 25/08/00 20/40GB DLT SCSI Tape Drive
09N4040 20/40GB DLT Internal SCSI Tape Drive
00N7990
00N8017
00N8016
00N7956
94G7587
36L9636
10K2340
00N79xx
14
00N7992
-
-
-
-
-
-
-
-
-
40/80 GB DLT Internal SCSI Tape Drive
60/120 GB 8mm M2 SCSI Tape Drive
100/200 GB LTO Tape Drive
Associated Options
68-pin External Multimode LVD/SE
SCSI Terminator
PC Server SCSI Terminator Kit
Netfinity Two-Drop Internal SCSI Cable
6
Media Bay Tray and LVD Cable Kit
7
Tape Autoloaders
DLT Tape Autoloader
120/240 GB DDS/4 Tape Autoloader
8
8
16 Ultra2
LVD
8
8
16
8
8
16 Ultra2
LVD
16 Ultra2
LVD
16 Ultra2
LVD
89 mm (3.5”)
HH or 133 mm
(5.25”)HH
89 mm (3.5”)
HH or 133 mm
(5.25”)HH
89 mm (3.5”)
HH or 133 mm
(5.25”)HH
89 mm (3.5”) SL or 133 mm
(5.25”)HH
89 mm (3.5”) SL or 133 mm
(5.25”)HH
133 mm
(5.25”)HH
133 mm
(5.25”)FH
133 mm
(5.25”)FH
133 mm
(5.25”)FH
133 mm
(5.25”)HH
133 mm
(5.25”)FH
12/24
12/24
20/40
10/20
10/20
20/40
20/40
20/40
40/80
60/120
100/200
1.1/2.2
1.1/2.2
2.75/5.5
1/2
1/2
3/6
1.5/3
1.5/3
6/10
12/24
15/30
Y
3
Y
Y
Y
Y
N
Y
N
N
N
N
Y
Y
N/A
Y
Y
N/A
Y
Y
N/A
N/A
N/A
-
-
-
-
-
-
-
-
-
-
-
16 LVD/SE
8/16
16
16 LVD
16
16 Ultra2
LVD
Ext.
Int.
Int.
Int.
Desktop
133 mm
(5.25”)FH
-
-
-
-
280/560
120/240
-
-
-
-
5/10
3/6
1/1
1/1
1/1
1/0
1/0
1/1
1/1
1/1
1/1
1
12
1/1
10L7440
03K8756
10L7440
03K8756
10L7440,
03K8756
3
10L7440,
03K8756
10L7440,
03K8756
10L7440
4,
03K8756
03K8705,
03K8756
03K8705
4
,
03K8756
03K8705
03K8756
4
3
,
10L7440
03K8756
4
3
,
03K8756
3
Y
N
Y
Y
Y
Y
N
N
N
N
-
-
16-bit,
2-drop
16-bit
2-drop
-
-
-
-
-
N
-
-
1/1
5/1
10L7440,
03K8705
-
-
03K8756
-
03K8756
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
142
Updated
17/10/00
Form Factor
LEGEND
HH: Half High - approx. height of 1.6”
SL: Slim Line - approx. height of 1”
FH: Full High
Description
External Tape Enclosures
10L7440 External Half High SCSI Storage Enclosure
8
8/16 Desktop N N
8-bit or
16-bit
-
03K8756 NetMEDIA Storage Expansion Unit EL
9
16 Rack Y N
16-bit,
4-drop
-
10L7113
03K8705
-
-
NetMEDIA Systems Management Adapter
10
DLT External SCSI Enclosure
11
16
16
-
Desktop
-
-
-
-
N
N
N
N
N
16-bit
-
-
03K8756
-
1. To determine cable requirements, note the tape drive’s SCSI interface, the appropriate SCSI controller from the system configurator section and the desired enclosure then refer to Appendix D: Cables-
Storage Units-Controllers.
2. Data compression typically provides a 2X improvenent in capacity and transfer rate, bur since data compression is affected by many factors, actual improvements may be more or less than 2X.
3. LVD support for LVD devices installed in a NetMEDIA Storage Expansion Unit EL P/N 03K8756 requires replacement of the standard single-ended internal cables with one or more (depending on configuration) cables from Media Bay Tray and LVD Cable Kit P/N 10K2340 which contains a single two-drop multi-mode terminated cable. If the standard cables are used for attachment to LVD devices, single-ended SCSI rules and bus speeds apply.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator P/N 00N7956.
5. Requires installation of the multi-mode terminated LVD cable from Media Bay Tray and LVD Cable Kit P/N 10K2340.
6. Netfinity Two-Drop Internal SCSI Cable P/N 36L9636 is a single-ended wide two-drop terminated cable.
7. Media Bay Tray and LVD Cable Kit P/N 10K2340 includes an internal two-drop multi-mode terminated LVD SCSI cable.
8. Provides a black desktop 5.25” half-high (HH) tape enclosure. Connector is configurable as 50-pin Centronix or 68-pin high density. Requires either tape drive self termination or SCSI-2 16-bit Active
Termination P/N 32G3918.
9. NetMEDIA Storage Expansion Unit EL P/N 03K8756 is a black 3U, 19” rack or NetBAY3/3E mountable tape enclosure which includes two full high (FH) or four half-high (HH) extended length 5.25” bays, two external 68-pin high density connectors and two internal four-drop single-ended terminated 16-bit SCSI cables for device attachment. Two power supplies and two standard country power cords are also included.
10. NetMEDIA Systems Management Adapter P/N 10L7113 may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and auto-termination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
11. Provides a black desktop DLT tape enclosure, with a 68-pin high density external connector. Requires termination by the tape drive or by installation of 68-pin External Multimode LVD/SE SCSI
Terminator P/N 00N7956.
12. A combination data/cleaning cartridge cleans the drive each time the data cartridge is used.
13. Not available from IBM after this date. Business Partner inventory may be available.
14. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
Note: Tape support varies by system depending on internal bay availability, SCSI cabling type, number of cable drops, existence of a RAID controller and availability of a suitable external enclosure. The following general rules should be followed.
a) Tapes are not supported for attachment to RAID controllers.
b) Single-ended (non-LVD) devices may be attached to internal multi-mode terminated cables. The entire SCSI bus will be limited to single-ended operation with a maximum bus speed of Ultra-SCSI.
c) LVD devices attached to single-ended terminated cables will operate in single-ended mode with a maximum bus speed of Ultra-SCSI.
Internal SCSI Cables and Optional SCSI Adapters
Most systems support the following SCSI adapters for use with tape. Consult the I/O Options table in the system sections for specific system support. Where tapes are supported internal to the system, the cables which ship with the adapters are supported for tape attachment. Some restrictions may apply based on cable and tape type which are explaned in the note above.
Part Number
02K3454
19K4646
36L9636
10K2340
Description Cable Description
PCI Fast/Wide Ultra SCSI Adapter
PCI Wide Ultra160 SCSI Adapter
Four-drop, single-ended terminated, 16-bit
Five-drop, multi-mode terminated
Netfinity Two-Drop Internal SCSI Cable Two-drop, single-ended terminated, 16-bit
Media Bay Tray and LVD Cable Kit Two-drop, multi-mode terminated
143
Updated
17/10/00
Appendix B: Tape Library Attributes
SCSI INTERFACE
LEGEND
F: Female - External
M: Male - External
68: 16-bit, 68-pin High Density connector
0.8: 16-bit, 68-pin Very High Density Connection
Interface (VHDCI) 0.8 mm connector
Diff: Differential SCSI
Description
00N79xx
4
DLT Tape Autoloader M68 Desktop Y
M0.8mm - F68
Converter
Y 1/7 1 1/1 1/1 280/560 5/10
00N79xx
5
00N79xx
5
33L4979
DLT Tape Library - Tower
DLT Tape Library - Rack
2
DLT Library Drive Upgrade
3
M68
M68
Desktop
4U Rack
Y
Y
M68-M68 (3)
M68-M68 (3)
Y
Y
1/14
1/14
1
1
2/2
2/2
1/3
1/3
490/980
490/980
5/10
5/10
M68 N Jumper N 5/10
1. Transfer rates are for single SCSI Channel configurations. Tape Libraries utilizing split library or dual host configurations may obtain higher rates. Data compression typically provides a 2X improvement in capacity and transfer rate, bur since data compression is affected by many factors , actual improvements may be more or less than 2X.
2. Includes Fixed Shelf P/N 94G7442 for installation in an IBM Rack or NetBAY22.
3. Upgrade 33L4979 is an additional drive for DLT Tape Libraries. Up to two tape drives may be installed for a maximum of three drives per DLT Tape Library
4. Where ‘xx’ represents a country specific power cord code: 70=UK, 71=Swiss, 72=Italy, 73=Israel, 33L4981=EU1, 33L4982=Denmark, 33L4983=South Africa/India.
5. Where ‘xx’ represents a country specific power cord code: Tower versions - 74=EU1, 75=Denmark, 76=India/South Africa, 77=UK, 78=Swiss, 79=Italy, 80=Israel: Rack versions - 81=EU1,
82=Denmark, 83=India/South Africa, 84=UK, 85=Swiss, 86=Italy, 87=Israel.
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
144
Updated
17/10/00
145
Updated
17/10/00
Appendix C: UPS Runtime Estimate (minutes)
Servers
Netfinity 1000
2
Netfinity 3000
2
Netfinity 3500 M20
2
Netfinity 4000R xSeries 200
2 xSeries 220
2 xSeries 230 / Netfinity 5100
2 xSeries 240 / Netfinity 5600
2 xSeries 330
2 xSeries 340 / Netfinity 4500R
2
Netfinity 6000R
2
Netfinity 7100
2
Netfinity 7600
2
Netfinity 8500R
2
Other Devices
Fibre Channel RAID Controller Unit (P/N SFCU1xx)
2
FAStT500 Storage Server (P/N 00N69xx)
2
FAStT EXP500 Storage Expansion Unit (P/N 00N71xx)
2
FAStT200 Storage Server (P/N 19K11xx)
2
FAStT200 HA Storage Server (P/N 19K11xx)
2
EXP200 Storage Expansion Unit
2
EXP300 Storage Expansion Unit
2
SAN Fibre Channel Switch 8-port (P/N 2109S08)
SAN Fibre Channel Switch 16-port (P/N 2109S16)
# Pwr. Cords Std/Max
2/2
2/2
2/2
2/2
2/2
1/1
1/3
2/3
1/1
1/2
1/4
2/4
3/4
3/3
1/1
1/1
1/1
1/1
1/1
1/2
2/2
1/2
1/2
Watts Load Max./Typ.
225/160
225/160
430/300
150/105
350/245
350/245
375/250
450/315
220/160
390/270
525/395
475/330
475/330
1450/1015
160/105
200/140
350/245
390/275
390/275
350/280
360/285
200/140
200/140
1
SAN Data Gateway Router (P/N 2108R3S)
DLT Tape Autoloader and Library (P/N 00N79xx)
1/1
1/1
90/60
135/100
NetMEDIA Storage Expansion Unit EL (P/N 03K8756) 2/2 185/130
1. This table represents general guidelines for selecting the appropriate UPS based on minimum and typical runtime estimates. A ‘maximum configuration’ load will result in ‘minimum’
UPS runtime. ‘Typical’ loads are based on a production system running at approximately 70% of maximum capacity. The ‘typical’ loads represent a more likely configuration and, therefore, a more likely estimate of runtime. Customer environments are unique and are unlikely to be precisely represented by any of the specific entries in the table.
2. Power-Factor Corrected (PFC) power supply.
UPS Attributes
1
Communications Links to Servers
Color
EIA Height
EMEA Models
50 or 60 Hz, single phase, VAC:
EMEA
P/N
SU-700iNET
P/N
SUP072Y
US
P/N
SU-
700NET
94G3134
1 black
-
220-240 (208)
2
Tower
SU-1000iNET
P/N
SUP102Y
SU-
1000NET
94G3135
SU-1400iNET
P/N
SUP142Y
SU-
1400NET
94G3136
SU-2200iNET
P/N
06P60xx
6
Not Available
1 black
-
220-240 (208)
2
1 black
-
220-240 (208)
2
1 beige
-
220-240 (208)
2
SU-
1400RMiB
P/N 14RIxxx
7
Rack Mounted
SU-
3000RMiB
P/N 30RIxxx
7
SU-
1400RMB
94G6674
SU-
3000RMB
94G6676
SU-
5000RMiB
P/N 37L6862
SU-
5000RMB
37L6861
1 black
3U
220-240 (208)
2
3 black
3U
3 black
5U
220-240 (208)
2
220-240 (xxx)
2,
3
10 Amp, IEC 320-C13
(Device) receptacles
16 Amp, IEC 320-C19
(PDU P/N 2PDUxxx) receptacles
Line Cord Receptacle (IEC 320- )
US Models
50 or 60 Hz, single phase, VAC:
Receptacles (NEMA 5-15R)
10 Amp, IEC 320-C13
(Device) receptacles
16 Amp, IEC 320-C19
(PDU 94G7450) receptacles
Line Cord Length, NEMA Plug
4
-
C14
120 (120)
2
4
-
-
6 ft., 5-15P
4
-
C14
120 (120)
2
6
-
-
6 ft., 5-15P
4
-
C20
120 (120)
2
6
-
-
6 ft., 5-15P
8
1
C20
-
-
-
-
-
4
-
C14
120 (120)
2
6
-
-
6 ft., L5-15P
8
1
C20
120 (120)
2
8
-
-
6 ft., L5-30P
8
2
TB
5
200-220 (208)
2
-
8
2
4
8 ft., L5-30P
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
146
Updated
17/10/00
147
Updated
17/10/00
1. Data provided by APC.
2. How-to-Read example for 220-240(208): Input VAC is 220- 240 as is the UPS output when electric service is active. When electriic service is interupted and the UPS is on battery the UPS output is 208 VAC.
3. Battery output may be set to 220, 225, 230, or 240 VAC.
4. Two PDU jumper cables ship with the UPS for attachment from the IEC 320-C19 receptacles to Power Distribution Units (PDU) (P/N 2PDUxxx).
5. SU-5000RMiB (P/N 37L6862) contains a Terminal Block (TB) for direct attachment to an electrical source by qualified personnel.
6.Where ‘xx’ represents the appropriate country code as follows:- 14=UK, 15=Denmark/Switzerland, 16=EUR, 17=Israel, 18=Italy, 19=South Africa.
7. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom, EUR=Europe.
Total Configuration Runtime Estimator (Time in minutes)
1
Tower Rack Mount
EMEA
Part Number
US
Part Number
SU-700iNET
P/N SUP072Y
SU-700NET
94G3134
SU-1000iNET
P/N SUP102Y
SU-1000NET
94G3135
SU-1400iNET
P/N SUP144Y
SU-1400NET
94G3136
SU-2200iNET
P/N 06P60xx
5
Not Available
SU-1400RMiB
P/N 14RIxxx
94G6674
6
SU-1400RMB
SU-3000RMiB
P/N 30RIxxx
6
SU-3000RMB
94G6676
SU-5000RMiB
P/N 37L6862
SU-5000RMB
37L6861
Total Load (Watts) Runtime Minutes Runtime Minutes Runtime Minutes Runtime Minutes Runtime Minutes Runtime Minutes Runtime Minutes
-
-
-
-
-
-
9
7
5
22
17
12
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1900
2000
2100
2200
2300
2400
1300
1400
1500
1600
1700
1800
2500
2600
2700
2800
1. Data provided by APC.
500
550
600
650
700
750
200
250
300
350
400
450
800
850
900
950
1000
1100
1200
7
6
-
11
9
8
18
14
12
38
28
22
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
12
11
10
18
16
13
29
23
20
62
43
34
-
-
6
-
9
8
7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
31
28
25
43
38
34
130
104
85
71
65
52
18
17
15
13
23
21
19
-
-
-
-
-
-
-
-
-
-
8
-
-
11
9
9
9
8
8
13
11
10
22
18
15
45
34
25
-
-
5
-
7
7
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
29
26
24
38
35
31
58
52
45
104
84
70
17
16
14
12
22
20
18
8
7
-
10
9
8
-
-
-
-
-
-
-
68
63
59
97
87
76
240
200
166
145
125
110
43
39
34
31
55
51
47
11
10
10
14
12
11
8
8
9
9
20
18
17
28
25
22
Steps:
1. Identify the devices contained in the configuration.
2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimum runtime, or Typical Load for typical runtime.
3. Find the Total Configuration Load in the table above.
4. Select the most appropriate UPS model to achieve the desired runtime.
5. Where ‘xx’ represents the appropriate country code as follows:- 14=UK, 15=Denmark/Switzerland, 16=EUR, 17=Israel, 18=Italy, 19=South Africa.
6. Where ‘xxx’ represents the appropriate country code as follows:- DEN=Denmark, ISR=Israel, ITA=Italy, SDI=Saudi Arabia, SAF=South Africa, SWS=Switzerland, UKM=United Kingdom, EUR=Europe.
NOTE: If the Total Configuration Load is greater than the entries above, split the load across two or more UPS units.
Appendix D: Cables - Storage Units - Controllers
F: Female - External
M: Male - External
I: Internal
68: 16-bit, 68-pin High Density connector
50: 8-bit, 50-pin Centronix Connector
0.8: 16-bit, 68-pin Very HighDensity Connection
Interface (VHDCI) 0.8 mm connector
16: 16-bit, 68-pin connector
8: 8-bit, 50-pin connector
Description
RAID Storage Controllers
Netfinity Fibre Channel RAID Controller Unit
Netfinity ServeRAID-4L Ultra160 SCSI Controller
Netfinity ServeRAID-4M Ultra160 SCSI Controller
Netfinity ServeRAID-4H Ultra160 SCSI Controller
Netfinity ServeRAID-3HB Ultra2 SCSI Adapter
Netfinity ServeRAID-3L Ultra2 SCSI Adapter
Netfinity ServeRAID-3L Ultra2 SCSI Adapter II
Ultra160 SCSI Controllers
PCI Wide Ultra160 SCSI Adapter
Netfinity 6000R - Ultra160 SCSI
Ultra2 SCSI Controllers
Netfinity 3000 - Model P/Ns 780UExx and up xSeries 240 / Netfinity 5600
Netfinity 7100
Netfinity 7600
Netfinity 8500R
Ultra SCSI Controllers
PCI Fast/Wide Ultra SCSI Adapter
Netfinity 3000 - Model P/Ns 771UExx and before
Netfinity 4000R - non-RAID models
No Onboard External Port
22
Netfinity 1000 Value Model (IDE)
Netfinity 3500 M20
Netfinity 4000R - RAID models xSeries 200 xSeries 220 xSeries 330 xSeries 340 / Netfinity 4500R xSeries 230 / Netfinity 5100
Related Options
0.8mm to 68-pin SCSI Adapter
Cable Group A (M0.8-M0.8)
Netfinity 2M Ultra2 SCSI Cable
Netfinity 4.2M Ultra2 SCSI Cable
Netfinity 20 M Ultra2 SCSI Cable
Cable Group B (M68-M0.8)
IBM 2M External .8mm SCSI Cable
Cable Group C (M68-M68)
PC Server F/W to F/W External SCSI Cable-1m
SFCU1xx
37L6091
37L6080
37L6889
37L6086
01K7364
19K0564
19K4646
Onboard
Adapter
Onboard
Onboard
Onboard
Onboard
02K3454
Adapter
Adapter
N/A
Onboard
Adapter
Onboard
Onboard
Onboard
Onboard
Onboard
Part
Number
Instructions: Identify Desired Controller Row and Storage Unit Column. The intersection of row and column contains the cable group letter which supports the connection. Go to the cable group under the corresponding storage unit for specific support. Read all Notes for row, column, and any cable group footnotes.
Storage Enclosure Unit
EXP15
SE2RXxx
EXP200
00N6xxx
19
EXP300
19K11xx
External HH
SCSI
10L7440
DLT Ext.
SCSI
03K8705
NetMEDIA
03K8756
NetMEDIA
Adapter
10L7113
Max.MB/sec.)
1
LVDS
Connector Type
40
X
F0.8
80
X
F0.8
160
X
F0.8
-
-
F68 or F50
-
-
F68
-
X
F0.8
-
-
F0.8
Max./
Channel
(MB/sec)
1
LVDS
Connector
Type/ Max
Note # 2, 3 2, 4 2, 5 6 6, 7 2, 6 2, 6, 8
160
160
80
80
80
80
80
40
40
40
80
160
160
160
80
80
80
-
-
80
-
-
-
-
-
X
X
X
X
X
X
X
-
-
-
X
X
X
X
X
X
X
X
-
-
-
-
-
-
-
F0.8/1
F0.8/1
F68/1
F0.8/1
F0.8/1
F0.8/1
F0.8/1
F68/1
F68/1
F68/1
F0.8/6
F0.8/1
F0.8/2
F0.8/4
F0.8/3
F0.8/1
F0.8/1
N/A
N/A
F0.8/1
N/A
N/A
N/A
N/A
N/A
-
-
-
-
-
B
11
-
-
-
-
-
-
-
-
-
-
A
A
A
A
A
A
A
-
-
-
-
-
-
-
B
11
-
-
-
-
-
-
-
-
-
-
A
A
A
A
A
A
A
-
-
-
14
-
-
-
-
-
-
-
-
9
13
13
13
-
-
-
15
-
21
-
-
-
-
-
B
B
C
B
B
B
-
C
C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
B
B
C
B
B
-
-
C
C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
A
A
-
A
A
A
A
-
-
-
-
-
-
-
-
A
A
-
A
A
A
A
B
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
B
B
-
B
B
C
23
-
B
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
B
B
01K8017 M0.8-F68 16 -
03K9310
03K9311
37L7101
01K8027
SS2C02Y
-
-
-
-
-
X
X
X
-
-
M0.8-M0.8
M0.8-M0.8
M0.8-M0.8
M68-M0.8
M68-M68
15
15
10
-
23
X
X
X
10
X
-
-
X
18
X
X
10
X
-
-
X
18
X
X
X
-
-
-
-
X
X
-
-
-
X
X
X
X
23
X
X
-
X
X
-
X
-
F: Female - External
M: Male - External
I: Internal
68: 16-bit, 68-pin High Density connector
50: 8-bit, 50-pin Centronix Connector
0.8: 16-bit, 68-pin Very HighDensity Connection
Interface (VHDCI) 0.8 mm connector
16: 16-bit, 68-pin connector
8: 8-bit, 50-pin connector
Part
Number
Instructions: Identify Desired Controller Row and Storage Unit Column. The intersection of row and column contains the cable group letter which supports the connection. Go to the cable group under the corresponding storage unit for specific support. Read all Notes for row, column, and any cable group footnotes.
Storage Enclosure Unit
EXP15
SE2RXxx
EXP200
00N6xxx
19
EXP300
19K11xx
External HH
SCSI
10L7440
DLT Ext.
SCSI
03K8705
NetMEDIA
03K8756
NetMEDIA
Adapter
10L7113
Max.MB/sec.)
1
40 80 160 -
LVDS X X X X -
Connector Type F0.8
F0.8
F0.8
F68 or F50 F68 F0.8
F0.8
Max./
Channel
(MB/sec)
1
LVDS
Connector
Type/ Max
Note # 2, 3 2, 4 2, 5 6 6, 7 2, 6 2, 6, 8 Description
Cable Group D (Short Wave Fibre)
19
Netfinity Fibre Channel 1 M Cable
Netfinity Fibre Channel 5 M Cable
Netfinity Fibre Channel 25 M Cable
Customer supplied cables <500M (0.31 miles)
Cable Group E (Long Wave Fibre)
19
Customer supplied cables < 10 KM (6.2 miles)
Cable Group G (Other)
68-pin External Multimode LVD/SE SCSI Terminator
GBIC
19
Netfinity Fibre Channel Short-Wave GBIC
Netfinity Fibre Channel Long-Wave GBIC
36L9973
03K9306
03K9305
**********
**********
00N7956
-
-
-
-
-
-
N/A
N/A
N/A
N/A
N/A
-
S/W Fibre
S/W Fibre
S/W Fibre
S/W Fibre
L/W Fibre
M68
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X
-
-
-
-
-
X
-
-
-
-
-
-
-
-
-
-
-
-
03K9308
03K9307
-
-
N/A
N/A
S/W Fibre
L/W Fibre
20
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1. Maximum supported speeds may be limited by installation of lower speed devices, controllers or cable lengths greater than 2 meters.
2. Rack installation cable management requires devices to have a minimum cable length of 2 meters. Cable length requirements will vary based on placement within a single or multiple rack suite.
3. Attachment to wide ultra SCSI controllers limits operational speeds to Ultra SCSI (40 MB/s) for cables up to 2 meters in length and Fast/Wide SCSI (20 MB/s) for cable lengths between 2 meters and 4.3 meters. Ultra2 SCSI controllers and cables allow cable lengths of up to twenty meters at up to 40 MB/s.
4. Attachment to wide ultra SCSI controllers limits operational speeds to Ultra SCSI (40 MBps) for cables up to two meters in length and Fast Wide (20 MBps) for cable lengths between 2 meters and 4.3 meters. Ultra2 SCSI controllers and cables allow cable lengths up to 20 meters at up to 80 MBps.
5. Maximum speeds may be limited by the installed devices or SCSI controller.
6. Daisy chaining tape enclosures is not supported at this time.
7. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
8. NetMEDIA Systems Management Adapter (P/N 10L7113) may be installed in a NetMEDIA Storage Expansion Unit to provide repeater function, LVDS interface, aggregate cable lengths up to 12 meters when attached to an LVD SCSI controller, and autotermination when the Expansion Unit is powered off. External connector is 0.8-mm VHDCI.
9. Connection to either IBM SAN Fibre Channel Managed Hub (P/N 35L1647) or Netfinity Fibre Channel PCI Adapter (P/N 01K7297) requires short wave fibre cables from Cable Group D.
10. Cable lengths exceeding 4.3 meters are NOT supported for attachment to non-Ultra-2 controllers.
11. Installations with cable lengths greater than 2 meters are limited to SCSI Fast/Wide speeds of 20MB/S .
12. RAID support for tape drives is limited to Non-RAID functions and utilisation of a dedicated channel.
13. Maximum speeds may be limited by the enclosure or installed devices.
14. Netfinity 7600 also includes a Netfinity ServeRAID-3HB Ultra2 SCSI Adapter (P/N 37L6086). See ServeRAID-3HB for connectivity requirements.
15. Does not support external attachment of SCSI devices attached to optional controllers.
16. Converts a F0.8mm into a F68-pin connector for attachment of an external M68 cable .
17. Supports attachment to Ultra-2 or single-ended SCSI controllers with operational speeds of up to Ultra-2. Controller, storage unit, cable length or storage device limitations may apply (see Max. MB/sec row and column above).
18. Netfinity EXP200 (P/N 00N6xxx) and EXP300 (P/N 19K11xx) include a single 2 metre Ultra2 SCSI cable similar to Netfinity 2 M Ultra2 SCSI Cable (P/N 03K9310).
19. See Fibre Array Solutions section for device attachment.
20. Short wave GBICs are included with various devices. See Fibre Array Solutions section for specific details.
21. The RAID adapter has both an internal and external port. Only one of the two ports may be used. The internal HDDs are attached to the RAID adapter therefore the external port must not be used.
22. No external SCSI port is available on these systems. A supported optional controller must be installed. See the systems section to determine which controllers and external storage units are supported then refer back to this table for cable requirements using the controller row. The Netfinity 4000R does not support customer installation of adapters that must be installed inside the server. Non-standard features must be installed at the factory. Contact your IBM Marketing Representative for more information.
23. Not supported for use in a rack. Rack installations require a minimum cable length of two meters.
CABLES - STORAGE UNITS -
CONTROLLERS
Appendix E: IBM Serial I/O
IBM Serial I/O Adapters
IBM Serial I/O SST8P
DB Adapter
(P/N 37L1414)
IBM Serial I/O Port Module
Serial I/O
PM16DB Port
Module
(P/N 37L1418)
Serial I/O
PM16RJ Port
Module
(P/N 37L1417)
IBM Serial I/O SST16P
RJ Adapter
(P/N 37L1415)
IBM Serial I/O SST128P
Expandable Adapter
(P/N 37L1416)
Includes two
4’ (1.2 m)
Cables
IBM Serial I/O Power Supply
Serial I/O PS4
Power Supply
(P/N 37L1421)
IBM Serial I/O Multiplexer Sets
Serial I/O 16RJ Multiplexer Set
(P/N 37L1419)
•Multiplexer Interface Unit
•RJ Expansion Module
•Power Supply
•Test Cable
Customer Supplied
Unshielded
Two-Twisted Pair
Cable < 3500’ (1km)
Serial I/O 16DB Multiplexer Set
(P/N 37L1420)
•Multiplexer Interface Unit
•DB Expansion Module
•Power Supply
•Test Cable
Customer Supplied
Unshielded
Two-Twisted Pair
Cable < 3500’ (1km)
SST128P
(P/N 37L1416)
Sample Configurations
PS4
(P/N 37L1421)
37L1414
37L1415
37L1416
37L1417
37L1418
37L1419
37L1420
37L1421
Serial I/O SST8P DB Adapter
1, 5
Serial I/O SST16P RJ Adapter
2, 5
Serial I/O SST128P Expandable Adapter
3, 5
Serial I/O PM16RJ Port Module
4
Serial I/O PM16DB Port Module
4
Serial I/O 16RJ Multiplexer Set
4, 6
Serial I/O 16DB Multiplexer Set
4, 6
Serial I/O PS4 Power Supply
4
4’ (1.2 m)
Cables
Four PM16DB
(P/N 37L1418)
PS4
(P/N 37L1421)
PM16RJ
(P/N 37L1417)
PM16DB
(P/N 37L1418)
Customer
Supplied
Unshielded
Two-Twisted Pair
Cable < 3500’ (1km)
16DB
Multiplexer Set
(P/N 37L1420)
16RJ
Multiplexer Set
(P/N 37L1419)
1. Intelligent serial I/O interface card providing eight DB-25 RS232 serial connections using an octopus cable. Support for all ports at 921.6 Kbps simultaneously.
2. Intelligent serial I/O interface card providing sixteen RJ-45 RS232 serial connections in a breakout box. Support for all ports at 115.2 Kbps simultaneously.
3. Intelligent interface card providing up to 128 RS232 serial connections
(DB25 or RJ45) configured in 16 port increments utilizing any combination of
Port Modules and Multiplexer Sets. Includes two 4' (1.2 m) bus cables. Each 4' cable supports attachment of 1 to 4 Port Modules and/or Multiplexer Interface
Units for a total of 8 per adapter. The first Port Module or Multiplexer Set attached to a cable requires a Serial I/O PS4 Power Supply (P/N 37L1421).
Support for all ports at 115.2 Kbps simultaneously.
4. Port Modules and Multiplexer Sets attach directly to one the two standard 4'
(1.2m) bus cables of the Serial I/O SST128P Expandable Adapter (P/N
37L1416) or directly to 1 or more Port Modules or Multiplexer Sets already attached to one of the cables. A maximum of 4 Port Modules or Multiplexer
Sets may be attached to single cable. The first Port Module or Multiplexer Set attached to a cable requires a Serial I/O PS4 Power Supply (P/N 37L1421).
5. Serial I/O Adapters are 32-bit PCI half length cards. A maximum of four
Serial I/O adapters (in any combination) may be installed in a single host system.
6. Requires a customer supplied Unshielded Two-Twisted Pair (Catagory 3 minimum) cable with a maximum length of 3,500 feet (1 Km).
To access IBM information specific to your country via the World Wide Web, use address: http://www.pc.ibm.com
150
Updated
17/10/00
Appendix F: IBM ServicePacs for Hardware
Maintenance
IBM Netfinity 24 hour by 7 days cover - 4 hour response target
Model Type Part No xSeries 130 / 135 xSeries 150 xSeries 200 xSeries 220 xSeries 330
Netfinity 1000
Netfinity 3000
Netfinity 3500 M10
Netfinity 3500 M20 xSeries 340 / Netfinity 4500R
Netfinity 5000 xSeries 230 / Netfinity 5100
Netfinity 5500
Netfinity 5500 M10
Netfinity 5500 M20 xSeries 240 / Netfinity 5600
Netfinity 6000R
Netfinity 7000 M10
Netfinity 7100
Netfinity 7600
Netfinity 8500R
14J1468
14J1470
14J1466
14J1466
14J1468
14J1225
72H9988
72H9988
14J1466
14J1468
72H9989
14J1470
72H9989
72H9989
72H9989
14J1316
14J1472
72H9991
14J1330
14J1318
14J1315
IBM Netfinity 9 hour by 5 days cover - 4 hour response target
Model Type Part No xSeries 130 / 135 14J1467 xSeries 150 xSeries 200 xSeries 220 xSeries 330
Netfinity 1000
Netfinity 3000
Netfinity 3500 M10
Netfinity 3500 M20 xSeries 340 / Netfinity 4500R
Netfinity 5000 xSeries 230 / Netfinity 5100
Netfinity 5500
Netfinity 5500 M10
Netfinity 5500 M20 xSeries 240 / Netfinity 5600
Netfinity 6000R
Netfinity 7000 M10
Netfinity 7100
Netfinity 7600
Netfinity 8500R
14J1469
14J1465
14J1465
14J1467
14J1224
14J0528
14J0528
14J1465
14J1467
14J0528
14J1469
14J0528
14J0528
14J0528
14J1317
14J1471
14J0528
14J1320
14J1319
14J1329
151
Updated
17/10/00
Important Notes
IBM reserves the right to change product specifications and to discontinue marketing products without notice.
MHz only measures microprocessor internal clock speed, not application performance. Many factors affect application performance.
When referring to hard drive capacity, MB stands for million bytes and GB stands for one thousand million bytes.Total user-accessible capacity may vary depending on operating environments.
Tape Drives which utilise data compression technology have storage capacity that will vary depending upon whether the drive is operating in native mode
(without compression) or compressed mode. Actual storage capacity will vary based upon many factors and may be less than the maximum possible.
Maximum internal hard disk drive capacities assume the replacement of any hard disk drives and the population of all hard disk drive bays with the largest currently supported drives available from IBM.
The information contained in this document has not been submitted to any formal IBM test and is distributed AS IS. The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability to evaluate and integrate them into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adapt these techniques to their own environments do so at their own risk.
For more information on IBM’s statement of Limited Warranty, please contact your IBM representative or reseller. Copies are available upon request.
Unless otherwise stated, IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM.
Applications included in IBM products may vary from retail versions and may not include all documentation or functions. Not all products are sold separately.
This publication was produced in the United States. IBM may not offer the products, services or features discussed in this document in other countries, and the information is subject to change without notice. Consult your local IBM representative for more information on the products, services and features available in your area.
©IBM Personal Systems Group
Department 2W6A
3039 Cornwallis Rd.
Research Triangle Park, NC 27709
Printed in the United States of America
All the part numbers referenced in this publication are product part numbers and not service part numbers.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of this publication. IBM may make improvements and/or changes in the product(s) and/or program(s) described in this publication at any time. IBM reserves the right to alter specifications and other product information without notice. It is your responsibility to obtain the latest information.
Other part numbers in addition to those listed in this document may be required to support a specific device or function.
Data on competitive products is obtained from publicly obtained information and is subject to change without notice. Please contact the manufacturer for the most recent information.
This IBM equipment is subject to applicable rules and regulations of the United States Federal Communication Commission (FCC).
The following items are trademarks or registered trademarks of IBM Corporation in the United States or other countries or both: AT, Flo Thru, HelpWare,
IBM, IntelliStation, LANStreamer, MWave, Netfinity, OS/2, Predictive Failure Analysis, SurePath, TechConnect,
WIN-OS/2, 800-CALL-IBM, ServerProven™.
TME 10 Netfinity is a trademark of Tivoli Systems, an IBM Company. Lotus, Lotus Notes and Lotus SmartSuite are trademarks of Lotus Development
Corporation.
Intel, Pentium Pro and Pentium II and MMX are trademarks or registered trademarks of Intel Corporation. Microsoft, Windows and Windows NT are trademarks or registered trademarks of the Microsoft Corporation. UNIX is a registered trademark in the United States and other countries or registered trademarks licensed exclusively through X/Open Company Limited. Trinitron is a trademark of the Sony Corporation. Java and HotJava are trademarks of
Sun MicroSystems, Inc. Adobe and PostScript are trademarks of Adobe Systems, Inc., APC is a trademark of American Power Conversion, Inc. All other registered trademarks and trademarks are properties of their respective owners.
152
Updated
17/10/00
To access information on the World Wide Web, use address: http://www.pc.ibm.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Positioning of Configurator Aids
- 7 Server Product Positioning
- 9 IBM xSeries and Netfinity Selection Guide
- 11 Appliance Server and Business Model Summary
- 13 IBM xSeries
- 27 IBM xSeries 230 and Netfinity
- 35 IBM xSeries 240 and Netfinity
- 43 IBM xSeries
- 49 IBM xSeries 340 and Netfinity 4500R
- 57 IBM Netfinity 1000 Value Model Configurator
- 61 IBM Netfinity 3000 Configurator
- 67 IBM Netfinity 3500 M20 Configurator
- 73 IBM Netfinity 4000R Configurator
- 77 IBM Netfinity 6000R Configurator
- 85 IBM Netfinity 7100 Configurator
- 93 IBM Netfinity 7600 Configurator
- 101 IBM Netfinity 8500R Configurator
- 111 IBM Netfinity EXP200 Configurator
- 115 IBM EXP300 Configurator
- 119 IBM FAStT200 (HA) Configurator
- 121 IBM FAStT EXP500 Configurator
- 123 Fibre Array Solutions
- 137 IBM Netfinity NetBAY3/NetBAY3E Stackable Enclosure
- 139 IBM Netfinity Rack Cabinet and Options
- 143 Appendix A: Tape Drive Attributes
- 145 Appendix B: Tape Library Attributes
- 147 Appendix C: UPS Runtime Estimate (minutes)
- 149 Appendix D: Cables - Storage Units - Controllers
- 151 Appendix E: IBM Serial I/O
- 152 Appendix F: IBM ServicePacs for Hardware Maintenance
- 153 Important Notes