Juniper Networks PTX 5000, PTX 1000 Packet Transport Switch Documentation

PTX Series Packet Transport Switch Software
Documentation
Published: 2013-10-15
Copyright © 2013, Juniper Networks, Inc.
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
PTX Series Packet Transport Switch Software Documentation
Copyright © 2013, Juniper Networks, Inc.
All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of
that EULA.
ii
Copyright © 2013, Juniper Networks, Inc.
Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Supported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Using the Examples in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Merging a Full Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Merging a Snippet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Part 1
Overview
Chapter 1
Platform Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chained Composite Next Hops for Transit Devices . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 2
Platform Components Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Platform Components for PTX Series Packet Transport Switches . . . . . . . . . . . . . 5
Part 2
Configuration
Chapter 3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Understanding Ethernet Interfaces for PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Physical Part of an Interface Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Interface Names for ACX Series Universal Access Routers . . . . . . . . . . . . . . . 10
J Series Interface Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Interface Names for M Series and T Series Routers and PTX Series Packet
Transport Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MX Series Router Interface Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Logical Part of an Interface Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PTX Series Packet Transport Switch Management Ethernet Interfaces . . . . . . . . 12
Overview of Forwarding Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Output Queue Assignments Based on Forwarding Class . . . . . . . . . . . . . . . . 13
Devices That Support Up to Four Forwarding Classes . . . . . . . . . . . . . . . . . . . 13
Devices That Support Up to 16 Forwarding Classes . . . . . . . . . . . . . . . . . . . . . 14
Default and Configurable Packet Loss Priority Values . . . . . . . . . . . . . . . . . . . 14
Configuration Statements Used to Configure and Apply Forwarding
Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10-Gigabit Ethernet Framing Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Copyright © 2013, Juniper Networks, Inc.
iii
PTX Series Packet Transport Switch Software Documentation
Chapter 4
Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring MAC Filtering on PTX Series Packet Transport Switches . . . . . . . . . . . 17
Configuring Flexible VLAN Tagging on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Configuring Tag Protocol IDs (TPIDs) on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Interface Encapsulation on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Ethernet 802.3ah OAM on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Configuring Aggregated Ethernet Interfaces on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configuring 10-Gigabit Ethernet Framing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 5
Clocking, Power Management, and Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clock Sources for PTX Series Packet Transport Switches . . . . . . . . . . . . . . . . . . . 27
Cooling System for PTX Series Packet Transport Switches . . . . . . . . . . . . . . . . . . 29
Configuring an External Clock Synchronization Interface for PTX Series Packet
Transport Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Synchronous Ethernet Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Configuring the Power-On Sequence for FPCs on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and
PTX Series Routing Engines ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Chapter 6
Interoperability between 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4
and P1-PTX-2-100GE-CFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4 . . . . . . . . . . . . . . . . . . . . . . . . 38
Configuring SA Multicast Bit Steering Mode on 100-Gigabit Ethernet PIC
P1-PTX-2-100GE-CFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configuring Two 50-Gigabit Ethernet Physical Interfaces on the 100-Gigabit
Ethernet PIC PD-1CE-CFP-FPC4 as One Aggregated Ethernet
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter 7
Traffic Black Hole Detection and Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Traffic Black Hole Caused by Fabric Degradation . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Disabling FPC Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Chapter 8
Routing Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Example: Overriding the Default BGP Routing Policy on Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Understanding the Default BGP Routing Policy on Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Example: Overriding the Default BGP Routing Policy on Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
iv
Copyright © 2013, Juniper Networks, Inc.
Table of Contents
Chapter 9
Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Understanding CoS CLI Configuration Statements on PTX Series Packet
Transport Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Configuring Up to 16 Forwarding Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Enabling Eight Queues on Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Multiple Forwarding Classes and Default Forwarding Classes . . . . . . . . . . . . 59
PICs Restricted to Four Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Examples: Configuring Up to 16 Forwarding Classes . . . . . . . . . . . . . . . . . . . . 61
Configuring Drop Profile Maps for Schedulers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Example: Configuring Excess Rate for PTX Series Packet Transport Switches . . . 63
Hardware Capabilities and Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CoS Hardware Capabilities and Limitations on M Series and T Series
Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CoS Hardware Capabilities and Limitations on PTX Series Packet Transport
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Chapter 10
Firewall Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Standard Firewall Filter Match Conditions for IPv4 Traffic . . . . . . . . . . . . . . . . . . . 79
Standard Firewall Filter Match Conditions for IPv6 Traffic . . . . . . . . . . . . . . . . . . 88
Standard Firewall Filter Match Conditions for MPLS Traffic . . . . . . . . . . . . . . . . . 95
Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic . . . . . . . . . . . . 96
Standard Firewall Filter Terminating Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Standard Firewall Filter Nonterminating Actions . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Chapter 11
Configuration Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
accept-source-mac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
action-fpc-restart-disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
degraded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
degraded-fabric-detection-enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
degraded-fpc-bad-plane-threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
encapsulation (Logical Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
encapsulation (Physical Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
framing (10-Gigabit Ethernet Interfaces) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
flexible-vlan-tagging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
forwarding-classes (Class-of-Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
forwarding-mode (PTX Series Packet Transport Switches) . . . . . . . . . . . . . . . . . 123
fru-poweron-sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
hold-interval (OAM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
loss-threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
maintenance-domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
maximum-links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
mtu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
name-format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
oam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
protocol (Schedulers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
recovered-clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
sa-multicast (PTX Series Packet Transport Switches) . . . . . . . . . . . . . . . . . . . . . 136
short-name-format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Copyright © 2013, Juniper Networks, Inc.
v
PTX Series Packet Transport Switch Software Documentation
source-address-filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
source-filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
synchronization (M Series, T Series, and PTX Series) . . . . . . . . . . . . . . . . . . . . . . 140
vlan-tags (Stacked VLAN Tags) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Chapter 12
Differences Between PTX Series and T Series . . . . . . . . . . . . . . . . . . . . . . . . 145
COS Feature Differences Between PTX Series Packet Transport Switches and
T Series Matrix Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Firewall and Policing Differences Between PTX Series Packet Transport Switches
and T Series Matrix Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Part 3
Administration
Chapter 13
Managing PTX Series Packet Transport Switches . . . . . . . . . . . . . . . . . . . . . 153
request chassis ccg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
request chassis clock master switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
request chassis fpc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
request chassis synchronization switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Chapter 14
Managing the Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and
PTX Series Routing Engines ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Chapter 15
Monitoring Commands for PTX Series Packet Transport Switches . . . . . . 167
show chassis alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
show chassis environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
show chassis environment cb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
show chassis environment ccg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
show chassis environment fpc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
show chassis environment fpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
show chassis environment monitored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
show chassis environment pdu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
show chassis environment routing-engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
show chassis environment sib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
show chassis ethernet-switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
show chassis fabric degraded-fabric-reachability . . . . . . . . . . . . . . . . . . . . . . . . 367
show chassis fabric errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369
show chassis fabric fpcs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
show chassis fabric plane-location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
show chassis fabric summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
show chassis fabric topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
show chassis fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
show chassis fpc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
show chassis hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
show chassis power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577
show chassis power sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 589
show chassis routing-engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 591
show chassis sibs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
show chassis synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619
show chassis temperature-thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 623
vi
Copyright © 2013, Juniper Networks, Inc.
Table of Contents
show chassis zones (PTX Series Packet Transport Switches) . . . . . . . . . . . . . . 640
show interfaces (PTX Series Packet Transport Switches) . . . . . . . . . . . . . . . . . . 642
show interfaces extensive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656
show interfaces filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675
show interfaces (M Series and T Series Routers, and PTX Series Packet Transport
Switches Management and Internal Ethernet) . . . . . . . . . . . . . . . . . . . . . . . 677
show interfaces mac-database (Gigabit Ethernet) . . . . . . . . . . . . . . . . . . . . . . . 693
show interfaces media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697
show interfaces policers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 699
show interfaces routing summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 701
show interfaces statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 704
show interfaces terse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716
Part 4
Troubleshooting
Chapter 16
Troubleshooting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721
show chassis alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722
Part 5
Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735
Copyright © 2013, Juniper Networks, Inc.
vii
PTX Series Packet Transport Switch Software Documentation
viii
Copyright © 2013, Juniper Networks, Inc.
List of Figures
Part 2
Configuration
Chapter 3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 1: PTX5000 in a Juniper Networks Environment . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 5
Clocking, Power Management, and Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 2: Clocking Example for PTX Series Packet Transport Switches . . . . . . . . . 28
Chapter 9
Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 3: Customer-Facing and Core-Facing Forwarding Classes . . . . . . . . . . . . . 56
Copyright © 2013, Juniper Networks, Inc.
ix
PTX Series Packet Transport Switch Software Documentation
x
Copyright © 2013, Juniper Networks, Inc.
List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Part 1
Overview
Chapter 2
Platform Components Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table 3: Maximum FRUs supported on the PTX5000 Packet Transport
Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Part 2
Configuration
Chapter 5
Clocking, Power Management, and Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table 4: Synchronous Ethernet Support on Junos OS . . . . . . . . . . . . . . . . . . . . . . 32
Chapter 9
Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Table 5: Sample Forwarding Class-to-Queue Mapping . . . . . . . . . . . . . . . . . . . . . 57
Table 6: CoS Features and Limitations on M Series and T Series Routers . . . . . . . 70
Table 7: CoS Hardware Capabilities and Limitations on PTX Series Packet
Transport Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Chapter 10
Firewall Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic . . . . . . . . . . . . 79
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic . . . . . . . . . . . 89
Table 10: Standard Firewall Filter Match Conditions for MPLS Traffic . . . . . . . . . . 95
Table 11: Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic . . . . . . 97
Table 12: Terminating Actions for Standard Firewall Filters . . . . . . . . . . . . . . . . . . 99
Table 13: Nonterminating Actions for Standard Firewall Filters . . . . . . . . . . . . . . . 101
Part 3
Administration
Chapter 15
Monitoring Commands for PTX Series Packet Transport Switches . . . . . . 167
Table 14: show chassis alarms Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Table 15: show chassis environment Output Fields . . . . . . . . . . . . . . . . . . . . . . . . 185
Table 16: show chassis environment cb Output Fields . . . . . . . . . . . . . . . . . . . . . 231
Table 17: show chassis environment cb Output Fields . . . . . . . . . . . . . . . . . . . . . 246
Table 18: show chassis environment fpc Output Fields . . . . . . . . . . . . . . . . . . . . . 251
Table 19: show chassis environment fpm Output Fields . . . . . . . . . . . . . . . . . . . 274
Table 20: show chassis environment monitored Output Fields . . . . . . . . . . . . . . 279
Table 21: show chassis environment pdu Output Fields . . . . . . . . . . . . . . . . . . . . 292
Table 22: show chassis environment routing-engine Output Fields . . . . . . . . . . 297
Table 23: show chassis environment sib Output Fields . . . . . . . . . . . . . . . . . . . . 301
Copyright © 2013, Juniper Networks, Inc.
xi
PTX Series Packet Transport Switch Software Documentation
Table 24: show chassis ethernet-switch Output Fields . . . . . . . . . . . . . . . . . . . . 326
Table 25: show chassis fabric degraded-fabric-reachability Output Fields . . . . . 367
Table 26: show chassis fabric errors Output Fields . . . . . . . . . . . . . . . . . . . . . . . 370
Table 27: show chassis fabric fpcs Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . 375
Table 28: show chassis fabric plane-location Output Fields . . . . . . . . . . . . . . . . 407
Table 29: show chassis fabric summary Output Fields . . . . . . . . . . . . . . . . . . . . 410
Table 30: show chassis fabric topology Output Fields . . . . . . . . . . . . . . . . . . . . . 416
Table 31: show chassis fan Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432
Table 32: show chassis fpc Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
Table 33: Routing Engines Displaying DIMM Information . . . . . . . . . . . . . . . . . . . 473
Table 34: show chassis hardware Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . 476
Table 35: show chassis power Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579
Table 36: show chassis power sequence Output Fields . . . . . . . . . . . . . . . . . . . 589
Table 37: show chassis routing-engine Output Fields . . . . . . . . . . . . . . . . . . . . . 593
Table 38: show chassis sibs Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 612
Table 39: show chassis synchronization Output Fields . . . . . . . . . . . . . . . . . . . . 620
Table 40: show chassis temperature-thresholds Output Fields . . . . . . . . . . . . . 624
Table 41: show chassis zones detail Output Fields . . . . . . . . . . . . . . . . . . . . . . . 640
Table 42: show interfaces PTX Series Output Fields . . . . . . . . . . . . . . . . . . . . . . 643
Table 43: show interfaces filters Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . 675
Table 44: M Series and T Series Router Management and Internal Ethernet show
interfaces Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 678
Table 45: show interfaces mac-database Output Fields . . . . . . . . . . . . . . . . . . . 693
Table 46: show interfaces policers Output Fields . . . . . . . . . . . . . . . . . . . . . . . . 699
Table 47: show interfaces routing summary Output Fields . . . . . . . . . . . . . . . . . . 701
Table 48: show interfaces terse Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . 716
Part 4
Troubleshooting
Chapter 16
Troubleshooting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721
Table 49: show chassis alarms Output Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 728
xii
Copyright © 2013, Juniper Networks, Inc.
About the Documentation
•
Documentation and Release Notes on page xiii
•
Supported Platforms on page xiii
•
Using the Examples in This Manual on page xiii
•
Documentation Conventions on page xv
•
Documentation Feedback on page xvi
•
Requesting Technical Support on page xvii
Documentation and Release Notes
®
To obtain the most current version of all Juniper Networks technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at http://www.juniper.net/books.
Supported Platforms
For the features described in this document, the following platforms are supported:
•
PTX Series
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load
merge relative command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the load merge command.
Copyright © 2013, Juniper Networks, Inc.
xiii
PTX Series Packet Transport Switch Software Documentation
If the example configuration does not start at the top level of the hierarchy, the example
is a snippet. In this case, use the load merge relative command. These procedures are
described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1.
From the HTML or PDF version of the manual, copy a configuration example into a
text file, save the file with a name, and copy the file to a directory on your routing
platform.
For example, copy the following configuration to a file and name the file ex-script.conf.
Copy the ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the
load merge configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
Merging a Snippet
To merge a snippet, follow these steps:
1.
From the HTML or PDF version of the manual, copy a configuration snippet into a text
file, save the file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file
ex-script-snippet.conf. Copy the ex-script-snippet.conf file to the /var/tmp directory
on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following
configuration mode command:
xiv
Copyright © 2013, Juniper Networks, Inc.
About the Documentation
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the
load merge relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see the CLI User Guide.
Documentation Conventions
Table 1 on page xv defines notice icons used in this guide.
Table 1: Notice Icons
Icon
Meaning
Description
Informational note
Indicates important features or instructions.
Caution
Indicates a situation that might result in loss of data or hardware damage.
Warning
Alerts you to the risk of personal injury or death.
Laser warning
Alerts you to the risk of personal injury from a laser.
Table 2 on page xv defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
Convention
Description
Examples
Bold text like this
Represents text that you type.
To enter configuration mode, type the
configure command:
user@host> configure
Fixed-width text like this
Italic text like this
Copyright © 2013, Juniper Networks, Inc.
Represents output that appears on the
terminal screen.
user@host> show chassis alarms
•
Introduces or emphasizes important
new terms.
•
•
Identifies guide names.
A policy term is a named structure
that defines match conditions and
actions.
•
Identifies RFC and Internet draft titles.
•
Junos OS CLI User Guide
•
RFC 1997, BGP Communities Attribute
No alarms currently active
xv
PTX Series Packet Transport Switch Software Documentation
Table 2: Text and Syntax Conventions (continued)
Convention
Description
Examples
Italic text like this
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Configure the machine’s domain name:
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
•
To configure a stub area, include the
stub statement at the [edit protocols
ospf area area-id] hierarchy level.
•
The console port is labeled CONSOLE.
< > (angle brackets)
Enclose optional keywords or variables.
stub <default-metric metric>;
| (pipe symbol)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
broadcast | multicast
# (pound sign)
Indicates a comment specified on the
same line as the configuration statement
to which it applies.
rsvp { # Required for dynamic MPLS only
[ ] (square brackets)
Enclose a variable for which you can
substitute one or more values.
community name members [
community-ids ]
Indention and braces ( { } )
Identify a level in the configuration
hierarchy.
; (semicolon)
Identifies a leaf statement at a
configuration hierarchy level.
Text like this
[edit]
root@# set system domain-name
domain-name
(string1 | string2 | string3)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
GUI Conventions
Bold text like this
Represents graphical user interface (GUI)
items you click or select.
> (bold right angle bracket)
Separates levels in a hierarchy of menu
selections.
•
In the Logical Interfaces box, select
All Interfaces.
•
To cancel the configuration, click
Cancel.
In the configuration editor hierarchy,
select Protocols>Ospf.
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
[email protected], or fill out the documentation feedback form at
xvi
Copyright © 2013, Juniper Networks, Inc.
About the Documentation
https://www.juniper.net/cgi-bin/docbugreport/ . If you are using e-mail, be sure to include
the following information with your comments:
•
Document or topic name
•
URL or page number
•
Software release version (if applicable)
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or JNASC support contract,
or are covered under warranty, and need post-sales technical support, you can access
our tools and resources online or open a case with JTAC.
•
JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•
Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/.
•
JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•
Find CSC offerings: http://www.juniper.net/customers/support/
•
Search for known bugs: http://www2.juniper.net/kb/
•
Find product documentation: http://www.juniper.net/techpubs/
•
Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•
Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
•
Search technical bulletins for relevant hardware and software notifications:
https://www.juniper.net/alerts/
•
Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
•
Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Copyright © 2013, Juniper Networks, Inc.
xvii
PTX Series Packet Transport Switch Software Documentation
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•
Use the Case Management tool in the CSC at http://www.juniper.net/cm/.
•
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
http://www.juniper.net/support/requesting-support.html.
xviii
Copyright © 2013, Juniper Networks, Inc.
PART 1
Overview
•
Platform Overview on page 3
•
Platform Components Overview on page 5
Copyright © 2013, Juniper Networks, Inc.
1
PTX Series Packet Transport Switch Software Documentation
2
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 1
Platform Overview
•
Chained Composite Next Hops for Transit Devices on page 3
Chained Composite Next Hops for Transit Devices
The Juniper Networks PTX Series Packet Transport Switch is principally designed to
handle large volumes of transit traffic in the core of large networks. Chained composite
next hops help to facilitate this capability by allowing a packet transport switch to process
much larger volumes of routes. A chained composite next hop allows the packet transport
switch to direct sets of routes sharing the same destination to a common forwarding
next hop, rather than having each route also include the destination. In the event that a
network destination is changed, rather than having to update all of the routes sharing
that destination with the new information, just the shared forwarding next hop is updated
with the new information. The chained composite next hops continue to point to this
forwarding next hop which now contains the new destination.
When the next hops for MPLS LSPs are created on packet transport switches, the tag
information corresponding to the inner-most MPLS label is extracted into a chained
composite next hop. The chained composite next hop is stored in the ingress PFE. The
chained composite next hop points to a next hop called the forwarding next hop that
resides on the egress PFE. The forwarding next hop contains all of the other information
(all of the labels except for the inner-most labels; and the IFA/IP information
corresponding to the actual next hop node). Many chained composite next hops can
share the same forwarding next hop. Additionally, separating the label from the forwarding
next hop and storing it on the ingress PFE (within the chained composite next hop) helps
to conserve egress PFE memory by reducing the number of rewrite strings stored on the
egress PFE.
On PTX Series Packet Transport Switches, chained composite next hops are enabled by
default for the following MPLS and VPN protocols and applications:
•
Labeled BGP
•
Layer 2 VPNs
•
Layer 3 VPNs
•
LDP
•
MPLS
Copyright © 2013, Juniper Networks, Inc.
3
PTX Series Packet Transport Switch Software Documentation
Related
Documentation
4
•
Point-to-Multipoint LSPs
•
RSVP
•
Static LSPs
•
Accepting Route Updates with Unique Inner VPN Labels in Layer 3 VPNs
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 2
Platform Components Overview
•
Platform Components for PTX Series Packet Transport Switches on page 5
Platform Components for PTX Series Packet Transport Switches
The PTX Series Packet Transport Switches are a portfolio of high-performance platforms
designed for the service provider supercore. These switches deliver powerful capabilities
based on innovative silicon and a forwarding architecture focused on MPLS and Ethernet.
PTX Series Packet Transport Switches deliver several critical core functionalities, including
industry-leading density and scalability, cost optimization, high availability, and network
simplification.
The Junos OS chassis management software for the PTX Series Packet Transport
Switches provides enhanced environmental monitoring and field-replaceable unit (FRU)
control. Chassis management delivers: a faster master switchover, enhanced power
budgeting with modular power management, reduced power consumption for partially
populated systems, granular control over FRU power-on, multizone cooling with better
fan speed control for reduced noise, and CPU leveling during monitoring intervals.
System clocking is controlled by centralized clock generators (CCGs) that provide a
19.44-MHz Stratum 3 clock signal. The CCG can derive a master clock from a valid source
and synchronize all interfaces on the chassis to this master clock.
The modular power design allows power efficiency on the order of 1 watt per Gbps. Power
supply modules (PSMs) regulate zone power and provide power to specific FRUs in the
system. Power distribution units (PDUs) distribute zone power. Customers can use only
as much power required for their chassis depending on the number of FRUs present.
The chassis has separate cooling chambers. Fans operating in one chamber have no
impact on cooling in another chamber, enabling the chassis to run fans at different speeds
in different chambers. The chassis can coordinate FRU temperatures in each zone and
the fan speeds of the fan trays in these zones.
Table 3: Maximum FRUs supported on the PTX5000 Packet Transport
Switch
FRU
Maximum Number
Routing Engines
2
Copyright © 2013, Juniper Networks, Inc.
5
PTX Series Packet Transport Switch Software Documentation
Table 3: Maximum FRUs supported on the PTX5000 Packet Transport
Switch (continued)
Related
Documentation
6
FRU
Maximum Number
Control Board (CB)
2
Power distribution unit (PDU)
2
Power supply module (PSM)
4 per PDU
Fan
3
FPC
8
PIC
2 per FPC
Switch Interface Board (SIB)
9
Craft Interface (FPD)
1
Centralized clock generator (CCG)
2
•
PTX5000 Hardware Component Overview
•
PTX5000 Field-Replaceable Units
•
PTX Series PIC Description
•
PTX5000 Centralized Clock Generator Description
•
Clock Sources for PTX Series Packet Transport Switches on page 27
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
PTX5000 Packet Transport Switch Hardware Guide
Copyright © 2013, Juniper Networks, Inc.
PART 2
Configuration
•
Overview on page 9
•
Interfaces on page 17
•
Clocking, Power Management, and Cooling on page 27
•
Interoperability between 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP on page 37
•
Traffic Black Hole Detection and Recovery on page 43
•
Routing Policy on page 47
•
Class of Service on page 53
•
Firewall Filters on page 79
•
Configuration Statements on page 107
•
Differences Between PTX Series and T Series on page 145
Copyright © 2013, Juniper Networks, Inc.
7
PTX Series Packet Transport Switch Software Documentation
8
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 3
Overview
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
Physical Part of an Interface Name on page 10
•
Logical Part of an Interface Name on page 12
•
PTX Series Packet Transport Switch Management Ethernet Interfaces on page 12
•
Overview of Forwarding Classes on page 13
•
10-Gigabit Ethernet Framing Overview on page 15
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches
PTX Series Packet Transport Switches are a portfolio of high-performance platforms
designed for the service provider supercore. A PTX Series Packet Transport Switch working
in conjunction with a T Series core router allows a service provider to build a core network
that is flexible enough to accommodate cloud-delivered services, mobility for devices
and users, and bandwidth-intensive applications such as HD video. Forwarding
architecture for PTX Series Packet Transport Switches is focused on MPLS and Ethernet.
Figure 1: PTX5000 in a Juniper Networks Environment
T4000
T4000
Converged Supercore
IP services
PTX5000
PTX5000
T4000
MX Series
T4000
IP services
g017760
MX Series
All physical interfaces on a PTX Series Packet Transport Switch use et for the FPC type.
For information about how to specify interfaces, see these topics:
•
Physical Part of an Interface Name on page 10
•
Logical Part of an Interface Name on page 12
Copyright © 2013, Juniper Networks, Inc.
9
PTX Series Packet Transport Switch Software Documentation
NOTE: Physical interfaces on PTX Series Packet Transport Switches do not
support:
•
VLAN rewrite for CCC encapsulation
•
Source MAC learning for accounting
•
MAC policing
NOTE: Starting in Junos OS Release 12.3R2, Wide Area Network Physical
Layer Device (WAN PHY) mode is supported on the 24-port 10-Gigabit
Ethernet LAN/WAN PIC with SFP+. No other PIC supports WAN PHY on the
PTX packet transport switch.
Related
Documentation
•
PTX Series Packet Transport Switch PIC Guide.
•
PTX Series Packet Transport Switch Management Ethernet Interfaces on page 12
•
Configuring MAC Filtering on PTX Series Packet Transport Switches on page 17
•
Configuring Aggregated Ethernet Interfaces on PTX Series Packet Transport Switches
on page 23
Physical Part of an Interface Name
•
Interface Names for ACX Series Universal Access Routers on page 10
•
J Series Interface Names on page 11
•
Interface Names for M Series and T Series Routers and PTX Series Packet Transport
Switches on page 11
•
MX Series Router Interface Names on page 11
Interface Names for ACX Series Universal Access Routers
ACX Series routers do not have actual PIC devices. Instead they have built-in network
ports on the front panel of the router. These ports are named using the same naming
convention used for routers with PIC devices with the understanding that the FPC, PIC
and port are pseudo devices. When you display information about one of these ports,
you specify the interface type, the slot for the Flexible PIC Concentrator (FPC), the slot
on the FPC for the Physical Interface Card (PIC), and the configured port number.
In the physical part of the interface name, a hyphen (-) separates the media type from
the FPC number, and a slash (/) separates the FPC, PIC, and port numbers:
type-fpc/pic/port
10
Copyright © 2013, Juniper Networks, Inc.
Chapter 3: Overview
J Series Interface Names
On J Series routers, when you display information about an interface, you specify the
interface type, the slot in which the Physical Interface Module (PIM) is installed, 0, and
the configured port number.
In the physical part of the interface name, a hyphen (-) separates the media type from
the PIM number, and a slash (/) separates the PIM, 0, and port numbers:
type-pim/0/port
NOTE: An exception to the type-pim/0/port physical description is the
Integrated Services Digital Network (ISDN) dialer interface, which uses the
syntax dlnumber.
Interface Names for M Series and T Series Routers and PTX Series Packet Transport Switches
On M Series and T Series routers and PTX Series Packet Transport Switches, when you
display information about an interface, you specify the interface type, the slot in which
the Flexible PIC Concentrator (FPC) is installed, the slot on the FPC in which the Physical
Interface Card (PIC) is located, and the configured port number.
In the physical part of the interface name, a hyphen (-) separates the media type from
the FPC number, and a slash (/) separates the FPC, PIC, and port numbers:
type-fpc/pic/port
NOTE: Exceptions to the type-fpc/pic/port physical description include the
aggregated Ethernet and aggregated SONET/SDH interfaces, which use the
syntax aenumber and asnumber, respectively.
MX Series Router Interface Names
On MX Series routers when you display information about an interface, you specify the
interface type, the Dense Port Concentrator (DPC), Flexible PIC Concentrator (FPC), or
Modular Port Concentrator (MPC) slot, the PIC or MIC slot, and the configured port
number.
NOTE: Although the MX Series routers use DPCs, FPCs, MPCs, MICs, and
PICs, command syntax in this book is shown as fpc/pic/port for simplicity.
In the physical part of the interface name, a hyphen (-) separates the media type from
the FPC number, and a slash (/) separates the DPC, FPC or MPC, MIC or PIC, and port
numbers:
type-fpc/pic/port
Copyright © 2013, Juniper Networks, Inc.
11
PTX Series Packet Transport Switch Software Documentation
•
fpc—Slot in which the DPC, FPC, or MPC is installed.
•
pic—Slot on the FPC in which the PIC is located or slot on the MPC in which the MIC is
located.
For DPCs, the PIC value is logically mapped to the DPC port numbers. The PIC-to-port
mapping varies on different platforms.
•
port—Port number on the DPC, PIC, or MIC.
Logical Part of an Interface Name
The logical unit part of the interface name corresponds to the logical unit number, which
can be a number from 0 through 16,384. In the virtual part of the name, a period (.)
separates the port and logical unit numbers:
•
J Series routers:
type-pim/0/port.logical
•
Other platforms:
type-fpc/pic/port.logical
PTX Series Packet Transport Switch Management Ethernet Interfaces
For PTX Series Packet Transport Switches, the Junos OS automatically creates the
router’s management Ethernet interface, em0. To use em0 as an out-of-band
management port, you must configure its logical port (for example, em0.0) with a valid
IP address.
Internal Ethernet interfaces are automatically created to connect the Routing Engines
to the Packet Forwarding Engines in the FPCs.
When you enter the show interfaces command on a PTX Series Packet Transport Switch,
the management Ethernet interface and internal Ethernet interfaces (and logical
interfaces) are displayed:
user@host> show interfaces ?
...
em0
em0.0
ixgbe0
ixgbe0.0
ixgbe1
ixgbe1.0
...
NOTE: The Routing Engines in the PTX Series Packet Transport Switches do
not support the management Ethernet interface fxp0, or the internal Ethernet
interfaces fxp1 or fxp2.
12
Copyright © 2013, Juniper Networks, Inc.
Chapter 3: Overview
Related
Documentation
•
Understanding Management Ethernet Interfaces
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
Overview of Forwarding Classes
This topic covers the following information:
•
Output Queue Assignments Based on Forwarding Class on page 13
•
Devices That Support Up to Four Forwarding Classes on page 13
•
Devices That Support Up to 16 Forwarding Classes on page 14
•
Default and Configurable Packet Loss Priority Values on page 14
•
Configuration Statements Used to Configure and Apply Forwarding Classes on page 14
Output Queue Assignments Based on Forwarding Class
It is helpful to think of forwarding classes as output queues. In effect, the end result of
classification is the identification of an output queue for a particular packet.
CoS packet classification assigns an incoming packet to an output queue based on the
packet’s forwarding class. Each packet is associated with one of the following default
forwarding classes:
•
Expedited forwarding (EF)—Provides a low-loss, low-latency, low- jitter, assured
bandwidth, end-to-end service.
•
Assured forwarding (AF)—Provides a group of values you can define and includes four
subclasses: AF1, AF2, AF3, and AF4, each with three drop probabilities: low, medium,
and high.
•
Best effort (BE)—Provides no service profile. For the best effort forwarding class, loss
priority is typically not carried in a class-of-service (CoS) value and random early
detection (RED) drop profiles are more aggressive.
•
Network control (NC)—This class is typically high priority because it supports protocol
control.
Devices That Support Up to Four Forwarding Classes
Some of the Juniper Networks routing platforms support up to four forwarding classes
for classifying customer traffic. On these platforms, you can configure one of each type
of default forwarding class. The following Juniper Networks platforms support up to four
forwarding classes:
•
M7i Multiservice Edge Routers with Compact Forwarding Engine Boards (CFEBs)
•
M10i Multiservice Edge Routers with CFEBs
Copyright © 2013, Juniper Networks, Inc.
13
PTX Series Packet Transport Switch Software Documentation
NOTE: This list does not reference any Juniper Networks device that has
reached its End of Life (EOL) period and its End of Support (EOS) milestone
date.
Devices That Support Up to 16 Forwarding Classes
Other Juniper Networks routing platforms support up to 16 forwarding classes, which
enables you to classify packets more granularly. For example, you can configure multiple
classes of EF traffic: EF, EF1, and EF2. On these platforms, the Junos OS software supports
up to eight output queues; therefore, if you configure more than eight forwarding classes,
you must map multiple forwarding classes to single output queues. The following Juniper
Networks routing and switching platforms support up to 16 forwarding classes and up
to 8 output queues:
•
EX Series switches
•
M7i Multiservices Edge Routers with Enhanced Compact Forwarding Engine Boards
(CFEB-Es)
•
M10i Multiservices Edge Routers with CFEB-Es
•
M120 Multiservices Edge Routers
•
M320 Multiservices Edge Routers
•
MX Series 3D Universal Edge Routers
•
T Series Core Routers
•
PTX Packet Transport Switches
Default and Configurable Packet Loss Priority Values
By default, the loss priority is low. On most devices, you can configure high or low loss
priority. On the following devices, you can configure high, low, medium-high, or
medium-low loss priority:
•
J Series Services Router interfaces
•
M320 routers and T Series routers with Enhanced II Flexible PIC Concentrators (FPCs)
•
T640 routers with Enhanced Scaling FPC4s
•
PTX Series Packet Transport Switches
Configuration Statements Used to Configure and Apply Forwarding Classes
To configure CoS forwarding classes, include the forwarding-classes statement at the
[edit class-of-service] hierarchy level:
[edit class-of-service]
forwarding-classes {
class class-name queue-num queue-number priority (high | low);
queue queue-number class-name priority (high | low);
14
Copyright © 2013, Juniper Networks, Inc.
Chapter 3: Overview
}
forwarding-classes-interface-specific forwarding-class-map-name {
class class-name queue-num queue-number [ restricted-queue queue-number ];
}
interfaces {
interface-name {
unit logical-unit-number {
forwarding-class class-name;
forwarding-classes-interface-specific forwarding-class-map-name;
}
}
}
restricted-queues {
forwarding-class class-name queue queue-number;
}
Related
Documentation
•
Default Forwarding Classes
•
Configuring Forwarding Classes
•
Applying Forwarding Classes to Interfaces
•
Configuring Up to 16 Forwarding Classes on page 56
•
Policer Overview
10-Gigabit Ethernet Framing Overview
The 10-Gigabit Ethernet interfaces support operation in two modes:
•
10GBASE-R, LAN Physical Layer Device (LAN PHY)
•
10GBASE-W, WAN Physical Layer Device (WAN PHY)
When the external interface is running in LAN PHY mode, it bypasses the WIS sublayer
to directly stream block-encoded Ethernet frames on a 10-Gigabit Ethernet serial interface.
When the external interface is running in WAN PHY mode, it uses the WIS sublayer to
transport 10-Gigabit Ethernet frames in an OC192c SONET payload.
NOTE: The T4000 Core Router supports only LAN PHY mode in Junos OS
Release 12.1R1. Starting with Junos OS Release 12.1R2, WAN PHY mode is
supported on the T4000 routers with the 12-port 10-Gigabit Ethernet
LAN/WAN PIC with SFP+ (PF-12XGE-SFPP). Starting with Junos OS Release
12.2, WAN PHY mode is supported on the T4000 routers with the 24-port
10-Gigabit Ethernet LAN/WAN PIC with SFP+ (PF-24XGE-SFPP).
Although the external interface provides a lower throughput when running in WAN PHY
mode because of the extra SONET overhead, it can interoperate with SONET section or
line level repeaters. This creates an advantage when the interface is used for
long-distance, point-to-point 10-Gigabit Ethernet links. When the external interface is
running in WAN PHY mode, some SONET options are supported. For information about
Copyright © 2013, Juniper Networks, Inc.
15
PTX Series Packet Transport Switch Software Documentation
SONET options supported on this interface, see Configuring SONET Options for 10-Gigabit
Ethernet Interfaces.
NOTE: SONET or SDH framing mode configuration framing (sdh | sonet) is
not applicable on the 10-Gigabit Ethernet ports. Configuring the wan-phy
framing mode on the 10-Gigabit Ethernet ports allows the interface to accept
SONET or SDH frames without further configuration.
Related
Documentation
16
•
Configuring SONET/SDH Framing Mode
•
Configuring 10-Gigabit Ethernet Framing on page 24
•
Understanding WAN Framing for 10-Gigabit Ethernet Trio Interfaces
•
Junos® OS Ethernet Interfaces
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 4
Interfaces
•
Configuring MAC Filtering on PTX Series Packet Transport Switches on page 17
•
Configuring Flexible VLAN Tagging on PTX Series Packet Transport Switches on page 18
•
Configuring Tag Protocol IDs (TPIDs) on PTX Series Packet Transport
Switches on page 19
•
Configuring Interface Encapsulation on PTX Series Packet Transport
Switches on page 19
•
Configuring Ethernet 802.3ah OAM on PTX Series Packet Transport Switches on page 21
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
•
Configuring Aggregated Ethernet Interfaces on PTX Series Packet Transport
Switches on page 23
•
Configuring 10-Gigabit Ethernet Framing on page 24
Configuring MAC Filtering on PTX Series Packet Transport Switches
This topic describes how to configure MAC filtering on PTX Series Packet Transport
Switches. MAC filtering enables you to specify the MAC addresses from which the Ethernet
interface can receive packets.
MAC filtering support on PTX Series Packet Transport Switches includes:
•
MAC source and destination address filtering for each port.
•
MAC source address filtering for each physical interface.
•
MAC source address filtering for each logical interface.
When you filter logical and physical interfaces, you can specify up to 1000 MAC source
addresses per port.
To configure MAC source address filtering for a physical interface, include the
source-filtering and source-address-filter statements at the [edit interfaces et-fpc/pic/port
gigether-options] hierarchy level:
[edit interfaces]
et-x/y/z {
gigether-options {
source-filtering;
Copyright © 2013, Juniper Networks, Inc.
17
PTX Series Packet Transport Switch Software Documentation
source-address-filter {
mac-address;
}
}
}
The source-address-filter statement configures which MAC source addresses are filtered.
The specified physical interface drops all packets from the MAC source addresses you
specify. You can specify the MAC address as nn:nn:nn:nn:nn:nn where n is a decimal digit.
To specify more than one address, include multiple mac-address options in the
source-address-filter statement.
To configure MAC source address filtering for a logical interface, include the
accept-source-mac statement at the [edit interfaces et-fpc/pic/port unit
logical-unit-number] hierarchy level:
[edit interfaces]
et-x/y/z {
gigether-options {
source-filtering;
}
unit logical-unit-number {
accept-source-mac {
mac-address mac-address;
}
}
}
The accept-source-mac statement configures which MAC source addresses are accepted
on the logical interface. You can specify the MAC address as nn:nn:nn:nn:nn:nn where n
is a decimal digit. To specify more than one address, include multiple mac-address
mac-address options in the accept-source-mac statement.
After an interface filter is configured, there is an accounting entry that is associated with
the MAC address filter. Counters accumulate if there are packets with matching MAC
source addresses. You can use the show interfaces mac-database Junos OS CLI command
to view the address count.
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
show interfaces mac-database (Gigabit Ethernet) on page 693
Configuring Flexible VLAN Tagging on PTX Series Packet Transport Switches
This topic describes how to configure flexible VLAN tagging on PTX Series Packet
Transport Switches. In addition to VLAN tagging and stacked VLAN tagging, you can
configure a port for flexible tagging. With flexible VLAN tagging, you can configure two
logical interfaces on the same Ethernet port, one with single-tag framing and one with
dual-tag framing.
To configure mixed tagging, include the flexible-vlan-tagging statement at the [edit
interfaces et-fpc/pic/port ] hierarchy level. You must also include the vlan-tags statement
18
Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Interfaces
with inner and outer options or the vlan-id statement at the [edit interfaces et-fpc/pic/port
unit logical-unit-number] hierarchy level:
[edit interfaces et-fpc/pic/port]
flexible-vlan-tagging;
unit logical-unit-number {
vlan-id number;
}
unit logical-unit-number {
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
}
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
Configuring Tag Protocol IDs (TPIDs) on PTX Series Packet Transport Switches
This topic describes how to configure the TPIDs expected to be sent or received on a
particular VLAN for PTX Series Packet Transport Switches.
For other types of Juniper Networks Ethernet PICs, you could configure 8 TPIDs per port.
However, the PTX Series Packet Transport Switches use MTIP and TL to classify a specific
TPID and Ethernet type. For MTIP, you can configure a maximum of 8 TPIDs for each
MAC chip.
As a consequence, you can specify the tag-protocol-id configuration statement only for
the first port (0) of a PTX Series Ethernet PIC. If you configure tag-protocol-id statements
on the other port, the configuration is ignored and a system error is recorded.
For example, the following is a supported configuration:
[edit interfaces et-2/0/0]
gigether-options {
ethernet-switch-profile {
tag-protocol-id [0x8100 0x9100];
}
}
The tag-protocol-id configuration statement supports up to eightTPIDs on port 0 of a
given Ethernet PIC. All eight TPIDs are populated to the two MTIPs and TLs associated
with the Ethernet PIC.
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
Configuring Flexible VLAN Tagging on PTX Series Packet Transport Switches on page 18
Configuring Interface Encapsulation on PTX Series Packet Transport Switches
This topic describes how to configure interface encapsulation on PTX Series Packet
Transport Switches. Use the flexible-ethernet-services configuration statement to
configure different encapsulation for different logical interfaces under a physical interface.
With flexible Ethernet services encapsulation, you can configure each logical interface
encapsulation without range restrictions for VLAN IDs.
Copyright © 2013, Juniper Networks, Inc.
19
PTX Series Packet Transport Switch Software Documentation
Supported encapsulations for physical interfaces include:
•
flexible-ethernet-services
•
ethernet-ccc
•
ethernet-tcc
Supported encapsulations for logical interfaces include:
•
ENET2
•
vlan-ccc
•
vlan-tcc
NOTE: PTX Series Packet Transport Switches do not support extended-vlan-cc
and extended-vlan-tcc encapsulation on logical interfaces. Instead, you can
configure a tag protocol ID (TPID) value of 0x9100 to achieve the same
results.
To configure flexible Ethernet services encapsulation, include the encapsulation
flexible-ethernet-services statement at the [edit interfaces et-fpc/pic/port ] hierarchy
level. For example:
interfaces {
et-fpc/pic/port {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
vlan-id 1000;
family inet {
address 11.0.0.20/24;
}
}
unit 1 {
encapsulation vlan-ccc;
vlan-id 1010;
}
unit 2 {
encapsulation vlan-tcc;
vlan-id 1020;
family tcc {
proxy {
inet-address 11.0.2.160;
}
remote {
inet-address 11.0.2.10;
}
}
}
}
}
20
Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Interfaces
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
Configuring Ethernet 802.3ah OAM on PTX Series Packet Transport Switches
The IEEE 802.3ah standard for Operation, Administration, and Management (OAM)
provides a specification for Ethernet in the first mile (EFM) connectivity. EFM defines how
Ethernet can be transmitted over new media types using new Ethernet physical layer
(PHY) interfaces. You can configure IEEE 802.3ah OAM on Ethernet point-to-point direct
links or links across Ethernet repeaters. The IEEE 802.3ah OAM standard meets the
requirement for OAM capabilities as Ethernet moves from being solely an enterprise
technology to being a WAN and access technology, as well as being backward-compatible
with existing Ethernet technology.
For Ethernet interfaces capable of running at 100 Mbps or faster, the IEEE 802.3ah OAM
standard is supported on numerous Juniper Networks routers and switches. This topic
describes configuration support for IEEE 802.3ah OAM features on PTX Series Packet
Transport Switches.
On PTX Series Packet Transport Switches, Junos OS Release 12.1 supports the following
IEEE 802.3ah OAM features at the physical interface level:
•
Discovery and link monitoring
•
Fault signaling and detection
•
Periodic packet management (PPM) processing
•
Action profile support
•
graceful Routing Engine switchover (GRES)
To configure 802.3ah OAM support for Ethernet interfaces, include the oam statement
at the [edit protocols] hierarchy level:
oam {
ethernet {
link-fault-management {
interfaces {
interface-name {
pdu-interval interval;
link-discovery (active | passive);
pdu-threshold count;
}
}
}
}
}
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
Configuring IEEE 802.3ah OAM Link-Fault Management
•
Configuring Link Discovery
Copyright © 2013, Juniper Networks, Inc.
21
PTX Series Packet Transport Switch Software Documentation
•
Detecting Remote Faults
•
Configuring an OAM Action Profile
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches
The IEEE 802.1ag provides a specification for Ethernet connectivity fault management
(CFM). The Ethernet network may be comprised of one or more service instances. A
service instance could be a VLAN, or a concatenation of VLANs. The goal of CFM is to
provide a mechanism to monitor, locate, and isolate faulty links. Ethernet 802.1ag is
supported on numerous Juniper Networks routers and switches. This topic describes
configuration support for Ethernet OAM 802.1ag features on the PTX Series Packet
Transport Switches.
Supported features include:
•
Maintenance domain (maintenance-domain domain-name) and maintenance levels
(level number).
•
Maintenance association (maintenance-association ma-name), including name formats
(name-format and short-name-format for vlan and 2octet), loss threshold
(loss-threshold number), and hold interval (hold-interval minutes).
•
maintenance association endpoint (MEP) functions, including Maintenance Endpoint
ID (mep mep-id), direction down (direction down), and autodiscovery (auto-discovery).
•
Link trace for down MEPs (link-down).
•
action profile (action-profile profile-name)
•
Loopback message generation and reply for down MEPs.
Features that are not supported include:
•
Up MEP configuration.
•
maintenance association intermediate point (MIP) configuration.
To configure flexible Ethernet services encapsulation on PTX Series Packet Transport
Switches, include the oam statement at the [edit protocols] hierarchy level. For example:
[edit protocols]
oam {
ethernet {
connectivity-fault-management {
maintenance-domain md1 {
level 0;
maintenance-association ma1 {
continuity-check {
interval 100ms;
}
mep 1 {
interface et-0/1/1;
direction down;
auto-discovery;
22
Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Interfaces
}
}
}
}
}
}
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
IEEE 802.1ag OAM Connectivity Fault Management Overview
Configuring Aggregated Ethernet Interfaces on PTX Series Packet Transport Switches
IEEE 802.3ad link aggregation enables you to group Ethernet interfaces to form a single
link layer interface, also known as a link aggregation group (LAG) or bundle. Link
aggregation can be used for point-to-point connections. It balances traffic across the
member links within an aggregated Ethernet bundle and effectively increases the uplink
bandwidth. Another advantage of link aggregation is increased availability because the
LAG is composed of multiple member links. If one member link fails, the LAG continues
to carry traffic over the remaining links.
This topic describes how to configure aggregated Ethernet interfaces on PTX Series
Packet Transport Switches.
On PTX Series Packet Transport Switches, aggregated Ethernet support includes the
following features:
•
A consistent interface type (et fpc/pic/port) across all Ethernet interfaces.
•
Ability to bundle multiple Ethernet interfaces
•
Fault tolerance
•
Load balancing between child links
•
Advanced features including flexible VLAN tagging and Ethernet services encapsulation
Aggregated Ethernet interfaces can use interfaces from different FPCs or PICs. The
following configuration is sufficient to get an aggregated Gigabit Ethernet interface up
and running.
[edit chassis]
aggregated-devices {
ethernet {
device-count 2;
}
}
[edit interfaces]
et-0/0/0 {
gigether-options {
802.3ad ae0;
}
}
et-0/0/1 {
Copyright © 2013, Juniper Networks, Inc.
23
PTX Series Packet Transport Switch Software Documentation
gigether-options {
802.3ad ae0;
}
}
ae0 {
vlan-tagging;
unit 0 {
vlan-id 100;
family inet {
address 200.200.1.2/24;
}
}
unit 1 {
vlan-id 101;
family inet {
address 200.200.2.2/24;
}
}
}
Related
Documentation
•
Understanding Ethernet Interfaces for PTX Series Packet Transport Switches on page 9
•
Configuring Junos OS for Supporting Aggregated Devices
Configuring 10-Gigabit Ethernet Framing
The 10-Gigabit Ethernet interfaces uses the interface type xe-fpc/pic/port. On single port
devices, the port number is always zero.
The xe-fpc/pic/port interface inherits all the configuration commands that are used for
gigabit Ethernet (ge-fpc/pic/port) interfaces.
To configure LAN PHY or WAN PHY operating mode, include the framing statement with
the lan-phy or wan-phy option at the [edit interfaces xe-fpc /pic/0 ] hierarchy level.
[edit interfaces xe-fpc/pic/0 framing]
framing (lan-phy | wan-phy);
NOTE:
•
The T4000 Core Router supports only LAN PHY mode in Junos OS Release
12.1R1. Starting with Junos OS Release 12.1R2, WAN PHY mode is supported
on the T4000 routers with the 12-port 10-Gigabit Ethernet LAN/WAN PIC
with SFP+ (PF-12XGE-SFPP). Starting with Junos OS Release 12.2, WAN
PHY mode is supported on the T4000 routers with the 24-port 10-Gigabit
Ethernet LAN/WAN PIC with SFP+ (PF-24XGE-SFPP).
•
When the PHY mode changes, interface traffic is disrupted because of port
reinitialization.
To display interface information, use the operational mode command show interfaces
xe-fpc/pic/port extensive.
24
Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Interfaces
NOTE:
Related
Documentation
•
SONET or SDH framing mode configuration framing (sdh | sonet) is not
applicable on the 10-Gigabit Ethernet ports. Configuring the wan-phy
framing mode on the 10-Gigabit Ethernet ports allows the interface to
accept SONET or SDH frames without further configuration.
•
If you configure the WAN PHY mode on an aggregated Ethernet interface,
you must set the aggregated Ethernet link speed to OC192.
•
framing on page 120
•
10-Gigabit Ethernet Framing Overview on page 15
•
Understanding WAN Framing for 10-Gigabit Ethernet Trio Interfaces
•
Junos® OS Ethernet Interfaces
Copyright © 2013, Juniper Networks, Inc.
25
PTX Series Packet Transport Switch Software Documentation
26
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 5
Clocking, Power Management, and
Cooling
•
Clock Sources for PTX Series Packet Transport Switches on page 27
•
Cooling System for PTX Series Packet Transport Switches on page 29
•
Configuring an External Clock Synchronization Interface for PTX Series Packet Transport
Switches on page 30
•
Synchronous Ethernet Overview on page 32
•
Configuring the Power-On Sequence for FPCs on PTX Series Packet Transport
Switches on page 34
•
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and PTX
Series Routing Engines ) on page 35
Clock Sources for PTX Series Packet Transport Switches
System clocking on PTX Series Packet Transport Switches is controlled by a Centralized
Clock Generator (CCG). The CCG is capable of deriving a master clock from a valid source
and synchronizing all interfaces on the chassis to this master clock. The CCG plugs into
the rear of the chassis. A pair of CCGs installed in the chassis provide a redundant fallback
option.
PTX Series Packet Transport Switches can use an internal clock source or it can extract
clocking from an external source.
Clock sources and specifications include:
•
The PTX Series Packet Transport Switch clock is a Stratum 3E-compliant clock with
Free Run +/- 4.6 ppm/20 years, Holdover +/- 0.01 ppm/24 hours, and Drift +/- 0.001
ppm/24 hours.
•
The internal clock is based on Freerun OCXO with +/- 10 ppb accuracy.
•
External clocking includes a choice of GPS-based clock recovery (5 MHz and 10 MHz)
or BITS-T1/E1 Line synchronization (1.544 MHz and 2.048 MHz)
•
Synchronous Ethernet is supported based on the ITU G.8261 and G.8262 specifications
with line timing from the 10-Gigabit Ethernet, 40-Gigabit Ethernet, or 100-Gigabit
Ethernet interface.
Copyright © 2013, Juniper Networks, Inc.
27
PTX Series Packet Transport Switch Software Documentation
Synchronous Ethernet is a key requirement for circuit (emulation) services and mobile
radio access technologies. Synchronous Ethernet supports sourcing and transfer of
frequency for synchronization purposes for both wireless and wireline services and is
primarily used for mobile backhaul and converged transport.
Figure 2: Clocking Example for PTX Series Packet Transport Switches
BITS0
Local
Oscillator
GPS0
BITS1
GPS1
Secondary
Clock Source
System Clock Source
System Clocking
FPC7
FPC0
et-7/1/0
et-7/1/1
Primary
Clock Source
g041217
et-7/0/1
et-0/1/1
et-7/0/0
et-0/1/0
PIC1
et-7/0/23
PIC0
PIC1
et-0/0/23
et-0/0/1
et-0/0/0
PIC0
In this example, the primary clock source is configured as interface et-7/1/1 and the
secondary clock source is configured as gps1.
Related
Documentation
28
•
Configuring an External Clock Synchronization Interface for PTX Series Packet Transport
Switches on page 30
•
recovered-clock on page 135
•
synchronization on page 140
Copyright © 2013, Juniper Networks, Inc.
Chapter 5: Clocking, Power Management, and Cooling
Cooling System for PTX Series Packet Transport Switches
The cooling system components work together to keep all components within the
acceptable temperature range. The host subsystem monitors the temperature of the
components. When the PTX Series Packet Transport Switch is operating normally, the
fans function at lower than full speed. If a fan fails or the ambient temperature rises
above a threshold, the speed of the remaining fans is automatically adjusted to keep the
temperature within the acceptable range. If the ambient maximum temperature
specification is exceeded and the system cannot be adequately cooled, the Routing
Engine shuts down some or all of the hardware components.
The PTX5000 Packet Transport Switch has a cooling system that contains different
zones that are monitored and cooled independently.
The cooling system consists of:
•
Fans
•
Different cooling zones
•
Individual monitors and controls for each fan
•
Temperature sensors
Fans are monitored by using CLI commands such as show chassis fan, show chassis
environment , and show chassis zones. The command displays the cooling zones, number
of fans running, and the temperature of the chassis components. Each horizontal fan
tray has 6 fans. The fans run at 30% capacity, instead of 70%, which saves 845 W.
Temperature sensors drive fan speeds. PTX5000 has variable fan speed control for each
fan. Fan trays have a wide range of 30-100% of maximum RPM. A wide RPM range allows
fans to run at minimum speed, while still enabling an increase in RPM to protect hot
components.
Fan trays fail if:
•
Any fan falls below the set RPM
•
Any fan rises above the set RPM
•
Any fan loses power
Cooling Protections
•
Vertical fan tray 0 ramps to 70
•
Horizontal Fan trays 1,2 ramp to 50%
•
After 10 minutes, all fan trays ramp to 100%
•
If the fans cooling the Routing Engine and Control Board are below 50% of the
maximum RPM, the Routing Engine and Control Board will shutdown in 15 minutes
•
If a fan fails, all other fans in that cooling zone will ramp to 100%.
Copyright © 2013, Juniper Networks, Inc.
29
PTX Series Packet Transport Switch Software Documentation
Related
Documentation
•
show chassis fan on page 431
•
show chassis environment on page 179
•
show chassis zones
•
PTX5000 Hardware Guide
Configuring an External Clock Synchronization Interface for PTX Series Packet Transport
Switches
The PTX Series Packet Transport Switches support an external synchronization interface
that can be configured to synchronize the internal Stratum 3 clock to an external source,
and then synchronize the chassis interface clock to that source.
This feature can be configured for external primary and secondary interfaces that use
building-integrated timing system (BITS), SDH Equipment Timing Source (SETS) timing
sources, or an equivalent quality timing source. On the Physical Interface Cards (PICs),
the transmit clock of the interface is synchronized to BITS/SETS timing and is traceable
to timing within the network.
The PTX Series Packet Transport Switches include a Centralized Clock Generator (CCG)
that is used to generate systemwide interface timing signals. The CCG:
•
Provides a synchronous Ethernet clock source to the chassis.
•
Accepts a BITS clock from CCG bulkhead to use as the basis for the Stratum clock
source.
•
Accepts an RX recovered clock from an FPC to use as input for the Stratum clock
source.
The sources can be BITS, GPS, freerunning, or RX recovered line timing.
To configure a recovered clock for an FPC, include the recovered-clock statement at the
[edit chassis fpc slot-number pic pic-number] hierarchy level:
[edit chassis fpc slot-number pic pic-number]
recovered-clock {
port port-number;
}
To configure external synchronization on the router, include the synchronization statement
at the [edit chassis] hierarchy level:
[edit chassis]
synchronization {
signal-type (t1 | e1);
switching--mode (revertive | non-revertive);
transmitter-enable;
primary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz |
gps-1-10mhz | gps-1-5mhz |bits-a | bits-b);
secondary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz |
gps-1-10mhz | gps-1-5mhz |bits-a | bits-b);
30
Copyright © 2013, Juniper Networks, Inc.
Chapter 5: Clocking, Power Management, and Cooling
}
Use the synchronization statement options to specify a primary and secondary timing
source. To do this, configure the following options:
•
For the PTX Series Packet Transport Switches, specify a signal type mode for interfaces,
either t1 or e1.
•
Specify the switching mode as revertive if a lower-priority synchronization can be
switched to a valid, higher-priority synchronization.
•
Specify the primary external timing source by using the primary (fpc-slot-number |
gps-0-10mhz | gps-0-5mhz | gps-1-10mhz | gps-1-5mhz |bits-a | bits-b) statement.
•
Specify the secondary external timing source by using the secondary (fpc-slot-number
| gps-0-10mhz | gps-0-5mhz | gps-1-10mhz | gps-1-5mhz |bits-a | bits-b) statement.
For the PTX 5000 Packet Transport Switch, the supported clock sources are:
Related
Documentation
•
fpc-0, fpc-1, fpc-2, fpc-3, fpc-4, fpc-5, fpc-6, or fpc-7.
•
gps-0-10mhz, gps-0-5mhz, gps-1-10mhz, or gps-1-5mhz.
•
bits-a or bits-b
•
Clock Sources for PTX Series Packet Transport Switches on page 27
•
recovered-clock on page 135
•
synchronization on page 140
Copyright © 2013, Juniper Networks, Inc.
31
PTX Series Packet Transport Switch Software Documentation
Synchronous Ethernet Overview
Synchronization is a key requirement for circuit (emulation) services and mobile radio
access technologies. Traditionally, mobile networks utilized SONET/SDH technologies
to backhaul voice and data traffic, and used the native support for frequency of
SONET/SDH to synchronize their radio network. With the need for greater-capacity
backhaul networks, packet-based technologies such as Carrier Ethernet (which do not
support the transfer of frequency), and wireless technologies such as frequency division
duplex and time division duplex require not only frequency synchronization but also
proper time and phase alignment. This requirement is fulfilled by Synchronous Ethernet,
which is used for physical layer frequency synchronization of connected access devices
(such as base stations, access nodes, and so on). Synchronous Ethernet supports sourcing
and transfer of frequency for synchronization purposes for both wireless and wireline
services and is primarily used for mobile backhaul and converged transport.
Synchronous Ethernet (ITU-T G.8261 and ITU-T G.8264) is a physical layer technology
that functions regardless of the network load and supports hop-by-hop frequency transfer,
where all interfaces on the trail must support Synchronous Ethernet. It enables you to
deliver synchronization services that meet the requirements of the present-day mobile
network, as well as future Long Term Evolution (LTE)–based infrastructures.
Table 4 on page 32 summarizes the first Junos OS release that supports Synchronous
Ethernet on the various Juniper Networks routers and their components:
Table 4: Synchronous Ethernet Support on Junos OS
32
Routers and Components
Junos OS Release
10-Gigabit Ethernet MPC with SFP+ transceivers
11.2R4
MX5, MX10, MX40, and MX80 3D Universal Edge routers with model
numbers MX5-T, MX10-T, MX40-T, and MX80-T
11.2R4
On MX240, MX480, and MX960 3D Universal Edge routers, only the
following Enhanced MPCs (MPCEs) support Synchronous Ethernet:
11.2R4
•
MPC1E (MX-MPC1E-3D)
•
MPC1E Q (MX-MPC1E-3D-Q)
•
MPC2E (MX-MPC2E-3D)
•
MPC2E Q (MX-MPC2E-3D-Q)
•
MPC2E EQ (MX-MPC2E-3D-EQ)
10-Gigabit Ethernet MIC with XFP in WAN-PHY framing mode
11.2R4
10-Gigabit Ethernet MIC with XFP in LAN-PHY framing mode
11.4
Juniper Networks PTX Series Packet Transport Switches with their
10-Gigabit Ethernet, 40-Gigabit Ethernet, and 100-Gigabit Ethernet
interfaces
12.1
Copyright © 2013, Juniper Networks, Inc.
Chapter 5: Clocking, Power Management, and Cooling
Table 4: Synchronous Ethernet Support on Junos OS (continued)
Routers and Components
Junos OS Release
Juniper Networks ACX2000 Series Universal Access routers with
Gigabit Ethernet and 10-Gigabit Ethernet SFP and SFP+ transceivers.
12.2
The ingress clock monitoring feature is supported on all MX Series routers with the 16x10GE
MPC. On these routers, the incoming Synchronous Ethernet signals cannot be monitored
on the 16x10GE MPC but are monitored by other Modular Port Concentrators (MPCs) in
the chassis. Therefore, you can use the 16x10GE MPC for incoming Synchronous Ethernet
signals if at least one other MPC with an Ethernet equipment clock (EEC) is present in
the chassis. This behavior is referred to as ingress clock monitoring. Note that the 16x10GE
MPC does not have a built-in EEC or internal clock; therefore, it can only input (accept)
a clock signal but cannot act as a clock source.
When an MX Series router is configured for Synchronous Ethernet on the 16x10GE MPC
and no other MPC with an EEC is present in the chassis, the Synchronous Ethernet feature
cannot be supported by the system. The system notifies the user through log messages
and CLI output and justifies its inability to support Synchronous Ethernet.
For information about Synchronous Ethernet support on the 10-Gigabit Ethernet MIC,
see Synchronous Ethernet on 10-Gigabit Ethernet MIC Overview.
Starting with Junos OS Release 12.1, Synchronous Ethernet is supported on Juniper
Networks PTX Series Packet Transport Switches. On the packet transport switches,
Synchronous Ethernet is supported on 10-Gigabit Ethernet, 40-Gigabit Ethernet, and
100-Gigabit Ethernet interfaces and is compliant with ITU-T G.8261 and ITU-T G.8262
standards.
Starting with Junos OS Release 12.2, Synchronous Ethernet is supported on Juniper
Networks ACX Series Universal Access routers with Gigabit Ethernet and 10-Gigabit
Ethernet SFP and SFP+ transceivers and is compliant with the ITU-T G.8261 and G.8264
standards.
Synchronous Ethernet is not supported in the following instances:
•
Slot 10 on MX Series router chassis
•
RJ45 ports
•
MPC3E with C form-factor pluggable (CFP) transceiver (CFP)
NOTE: Unified in-service software upgrade (unified ISSU) is currently not
supported when clock synchronization is configured for Synchronous Ethernet
on MX80 3D Universal Edge routers and on the MICs and MPCEs on MX240,
MX480, and MX960 routers.
Related
Documentation
•
Clock Sources for PTX Series Packet Transport Switches on page 27
•
Configuring Clock Synchronization Interface for MX Series Routers
Copyright © 2013, Juniper Networks, Inc.
33
PTX Series Packet Transport Switch Software Documentation
•
Configuring External Clock Synchronization for ACX Series Routers
•
Ethernet Synchronization Message Channel Overview
•
Example: Configuring Synchronous Ethernet on MX Series Routers
•
Example: Configuring Framing Mode for Synchronous Ethernet on MX Series Routers with
10-Gigabit Ethernet MIC
•
request chassis synchronization mode
•
show chassis synchronization (MX Series Routers)
•
Synchronous Ethernet on 10-Gigabit Ethernet MIC Overview
•
synchronization
Configuring the Power-On Sequence for FPCs on PTX Series Packet Transport Switches
The PTX Series Packet Transport Switch chassis supplies redundant power to all FPCs.
The Power Supply Modules—PSM2 and PSM3—can power up to four FPCs without
redundancy. In cases where all PSMs are not present, or some Power Supply Modules
(PSMs) fail or are removed during operation, service interruption is minimized by keeping
as many affected FPCs online without supplying redundant power to these FPCs. For
example, If there is only one PSM in the PSM2 and PSM3 slots on both Power Distribution
Units (PDUs) and more than four FPCs in the chassis, then the first four FPCs as configured
by the fru-poweron-sequence configuration are kept online, whereas the other FPCs are
offline because of no power.
By default, Junos OS uses the ascending order of the slot numbers of the FPCs as the
sequence to power on the FPCs. To configure the power-on sequence, include the
fru-poweron-sequence statement at the [edit chassis] hierarchy level:
[edit chassis]
fru-poweron-sequence;
Issue the show chassis power command to view power limits and usage details for the
FPCs. Issue the show chassis power sequence command to view details about the
power-on sequence for the FPCs. For more information about these commands, see the
Junos OS Operational Mode Commands.
If the power-on sequence is not configured by including the fru-poweron-sequence
statement, Junos OS uses the ascending order of the slot numbers of the FPCs as the
sequence to power-on the FPCs.
Related
Documentation
34
•
fru-poweron-sequence on page 124
Copyright © 2013, Juniper Networks, Inc.
Chapter 5: Clocking, Power Management, and Cooling
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and PTX
Series Routing Engines )
NOTE: For information about which Routing Engines are supported by each
device, see http://www.juniper.net/techpubs/en_US/release-independent/
junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html.
The M Series, MX Series (except for the MX80 routers), T Series, and TX Matrix routers
with a Routing Engine that has a hard disk attempt to boot from the storage media in
the following order:
1.
Removable media emergency boot device, such as a PC Card (if present)
2. CompactFlash card (if present)
3. Hard disk
The M Series and MX Series with a Routing Engine that has a solid-state drive (SSD)
attempt to boot from the storage media in the following order:
1.
USB media emergency boot device (if present)
2. CompactFlash card
3. Solid-state drive (SSD) in the SSD slot 1 or SSD slot 2 (if present)
MX80 routers attempt to boot from the storage media in the following order:
1.
USB media emergency boot device
2. Dual, internal NAND flash device (first da0, then da1)
The T series routers with a Routing Engine that has a solid-state drive (SSD) and TX
Matrix Plus routers attempt to boot from the storage media in the following order:
1.
USB media emergency boot device
2. CompactFlash card (if present)
3. Solid-state drive (SSD) in the Disk 1 slot (if present)
NOTE: The Disk 2 slot is not currently supported.
4. Storage media available on the LAN
The PTX Series Packet Transport Switches attempt to boot from the storage media in
the following order:
1.
USB media emergency boot device
2. CompactFlash card
Copyright © 2013, Juniper Networks, Inc.
35
PTX Series Packet Transport Switch Software Documentation
3. Solid-state drive (SSD) in the Disk 1 slot (if present)
4. Storage media available on the LAN
NOTE: Do not insert an emergency boot device during normal operations.
The router does not operate normally when it is booted from an emergency
boot device.
If the router boots from an alternate boot device, Junos OS displays a message indicating
this when you log in to the router. For example, the following message shows that the
software booted from the hard disk (/dev/ad1s1a):
login: username
Password: password
Last login: date on terminal
--- Junos 8.0 R1 built date
----- NOTICE: System is running on alternate media device (/dev/ad2s1a).
This situation results when the router detects a problem with the primary boot
device—usually the CompactFlash card—that prevents it from booting, and consequently
boots from the alternate boot device (the hard disk drive). When this happens, the primary
boot device is removed from the list of candidate boot devices. The problem is usually
a serious hardware error. We recommend you contact the Juniper Networks Technical
Assistance Center (JTAC).
When the router boots from the alternate boot device, the software and configuration
are only as current as the most recent request system snapshot command. However, if
the mirror-flash-on-disk command was enabled, then the hard disk drive contains a
synchronized, mirror image of the compact flash drive and therefore the current software
and configuration.
Related
Documentation
36
•
Routing Engine Specifications
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 6
Interoperability between 100-Gigabit
Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP on page 37
•
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4 on page 38
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP
You can enable interoperability between the 100-Gigabit Ethernet PIC PD-1CE-CFP-FPC4
and the 100-Gigabit Ethernet PIC P1-PTX-2-100GE-CFP by:
•
Configuring the two 50-Gigabit Ethernet physical interfaces on the 100-Gigabit Ethernet
PIC PD-1CE-CFP-FPC4 as one aggregated Ethernet physical interface.
•
Configuring source address (SA) multicast bit steering mode on the 100-Gigabit
Ethernet PIC P1-PTX-2-100GE-CFP.
SA multicast bit steering mode uses the multicast bit in the source MAC address for
packet steering.
NOTE: When SA multicast bit steering mode is configured on a PTX Series
Packet Transport Switch 100-Gigabit Ethernet port, VLANs are not supported
for that port.
The 100-Gigabit Ethernet PIC PD-1CE-CFP-FPC4 uses two 50-Gpbs Packet Forwarding
Engines to achieve 100-Gbps throughput. The 50-Gigabit Ethernet physical interfaces
are created when the 100-Gigabit Ethernet PIC is plugged in. The two physical interfaces
are visible and configuration is allowed on both the physical interfaces. You must configure
the physical interfaces on the 100-Gigabit Ethernet PIC PD-1CE-CFP-FPC4 in static link
aggregation group (LAG) mode without enabling Link Aggregation Control Protocol
(LACP). This ensures that a single 100-Gigabit aggregated interface is visible on the link
connecting to the 100-Gigabit Ethernet PIC P1-PTX-2-100GE-CFP.
Copyright © 2013, Juniper Networks, Inc.
37
PTX Series Packet Transport Switch Software Documentation
On the 100-Gigabit Ethernet PIC PD-1CE-CFP-FPC4, ingress packets are forwarded to
either Packet Forwarding Engine number 0 or 1 based on the SA multicast bit in the
received packet. The SA multicast bit of egress packets is set based on whether the
packet is forwarded from Packet Forwarding Engine number 0 or 1. As the default packet
steering mode is SA multicast bit steering mode, no configuration is necessary to enable
this mode.
On the 100-Gigabit Ethernet PIC P1-PTX-2-100GE-CFP, the SA multicast bit is ignored
in ingress packets. When SA multicast bit steering mode is enabled, the SA multicast bit
in the egress packets is set to 0 or 1 based on the flow hash value that is computed
internally by the Packet Forwarding Engine complex for each packet. No CLI configuration
is required to generate the flow hash value as this computation is done automatically.
The flow hash algorithm uses fields in the packet header to compute the flow hash value.
By default, the SA multicast bit is set to 0 in egress packets. You must configure SA
multicast bit steering mode to enable interoperability with the 100-Gigabit Ethernet PIC
PD-1CE-CFP-FPC4 .
NOTE: If you try to enable the interoperability between the 100-Gigabit
Ethernet PICs PD-1CE-CFP-FPC4 and P1-PTX-2-100GE-CFP without
configuring PD-1CE-CFP-FPC4 (with two 50-Gigabit Ethernet interfaces) in
static LAG mode, then there are issues in forwarding or routing protocols. For
example, if you create two untagged logical interfaces—one each on the two
50-Gigabit Ethernet interfaces—on the PD-1CE-CFP-FPC4 and one untagged
logical interface on the P1-PTX-2-100GE-CFP, then P1-PTX-2-100GE-CFP
does not learn about one of the 50-Gigabit Ethernet interfaces on
PD-1CE-CFP-FPC4.
Related
Documentation
•
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4 on page 38
•
sa-multicast on page 136
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
PF-1CGE-CFP
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4
You can enable interoperability between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4
and P1-PTX-2-100GE-CFP by performing the following tasks:
38
•
Configuring SA Multicast Bit Steering Mode on 100-Gigabit Ethernet PIC
P1-PTX-2-100GE-CFP on page 39
•
Configuring Two 50-Gigabit Ethernet Physical Interfaces on the 100-Gigabit Ethernet
PIC PD-1CE-CFP-FPC4 as One Aggregated Ethernet Interface on page 40
Copyright © 2013, Juniper Networks, Inc.
Chapter 6: Interoperability between 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and P1-PTX-2-100GE-CFP
Configuring SA Multicast Bit Steering Mode on 100-Gigabit Ethernet PIC P1-PTX-2-100GE-CFP
To enable the interoperability between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4
and P1-PTX-2-100GE-CFP, you must enable source address (SA) multicast bit steering
mode on P1-PTX-2-100GE-CFP.
NOTE: When you configure the SA multicast bit steering mode on the PTX
Series PIC P1-PTX-2-100GE-CFP, we recommend that you do not configure
the PIC ports as member links of an aggregated Ethernet interface because
this prevents load balancing on the peering T Series PIC PD-1CE-CFP-FPC4.
This T Series PIC must be in aggregated Ethernet mode to share bandwidth
between its two 50-Gigabit Ethernet interfaces.
To configure SA multicast bit steering mode on the 100-Gigabit Ethernet PIC
P1-PTX-2-100GE-CFP:
1.
Specify the FPC, PIC, and port information on the chassis.
[edit ]
user@host# edit chassis fpc slot pic slot port port-number
For example:
[edit ]
user@host# edit chassis fpc 1 pic 0 port 0
2. Configure the interoperation mode (SA multicast bit steering mode).
[edit chassis fpc 1 pic 0]
user@host# set forwarding-mode sa-multicast
3. Verify the configuration.
[edit ]
user@host# show chassis
fpc 1 {
pic 0 {
port 0 {
forwarding-mode {
sa-multicast;
}
}
}
}
NOTE: As the default packet steering mode for the 100-Gigabit Ethernet PIC
PD-1CE-CFP-FPC4 is SA multicast bit steering mode, no configuration is
necessary to enable this mode.
Copyright © 2013, Juniper Networks, Inc.
39
PTX Series Packet Transport Switch Software Documentation
Configuring Two 50-Gigabit Ethernet Physical Interfaces on the 100-Gigabit Ethernet PIC
PD-1CE-CFP-FPC4 as One Aggregated Ethernet Interface
To enable the interoperability between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4
and PF-1CGE-CFP or P1-PTX-2-100GE-CFP, you need to configure the two 50-Gigabit
Ethernet physical interfaces on PD-1CE-CFP-FPC4 as one aggregated Ethernet physical
interface. This ensures that a single 100-Gigabit aggregated interface is visible on the
link connecting to PF-1CGE-CFP or P1-PTX-2-100GE-CFP instead of two independent
50-Gigabit Ethernet interfaces.
When the PIC is in aggregated Ethernet mode, the two physical interfaces on the same
PIC are aggregated into one aggregated Ethernet physical interface. When the PIC is
configured with two physical interfaces, it creates the physical interfaces et-x/y/0:0 and
et-x/y/0:1, where x is the FPC slot number and y is the PIC slot number. For example, to
configure two physical interfaces for PIC slot 0 in FPC slot 5:
1.
Specify the number of aggregated Ethernet interfaces to be created.
[edit chassis]
user@host# set aggregated devices ethernet device-count count
For example:
[edit chassis]
user@host# set aggregated devices ethernet device-count 1
2. Specify the members to be included within the aggregated Ethernet bundle.
[edit interfaces ]
user@host# set interface-name gigether-options 802.3ad bundle
The following example shows how to configure two physical interfaces for PIC 0 on
a T1600 router.
[edit interfaces ]
user@host# set et-5/0/0:0 gigether-options 802.3ad ae0
user@host# set et-5/0/0:1 gigether-options 802.3ad ae0
3. Verify the configuration at the chassis.
[edit ]
user@host# show chassis
aggregated-devices {
ethernet {
device-count 1;
}
}
4. Verify the configuration at the interface.
[edit ]
user@host# show interfaces
et-5/0/0:0 {
gigether-options {
802.3ad ae0;
}
}
40
Copyright © 2013, Juniper Networks, Inc.
Chapter 6: Interoperability between 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and P1-PTX-2-100GE-CFP
et-5/0/0:1 {
gigether-options {
802.3ad ae0;
}
}
Related
Documentation
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP on page 37
•
sa-multicast on page 136
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
PF-1CGE-CFP
Copyright © 2013, Juniper Networks, Inc.
41
PTX Series Packet Transport Switch Software Documentation
42
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 7
Traffic Black Hole Detection and Recovery
•
Traffic Black Hole Caused by Fabric Degradation on page 43
•
Disabling FPC Restart on page 44
Traffic Black Hole Caused by Fabric Degradation
A traffic black hole occurs when packets are dropped by a device without notification.
Other connected devices continue to forward traffic to the affected device, impacting
the network performance. A severely degraded fabric plane can be one of the reasons
for a traffic black hole.
Devices can limit the black-hole time by detecting unreachable destination Packet
Forwarding Engines and signaling connected devices when they cannot carry traffic
because of a severely degraded fabric.
Packet Forwarding Engine destinations can become unreachable for the following reasons:
•
The fabric Switch Interface Boards (SIBs) go offline as a result of a CLI command or
a pressed physical button.
•
The fabric SIBs are turned offline by the Switch Processor Mezzanine Board (SPMB)
because of high temperature.
•
Voltage or polled I/O errors in the SIBs detected by the SPMB.
•
On T640 and T1600 routers:
•
•
All Packet Forwarding Engines receive destination errors on all planes from remote
Packet Forwarding Engines, even when the SIBs are online
•
Complete fabric loss caused by destination timeouts, even when the SIBs are online.
On PTX Series systems:
•
Link errors on all connected planes
•
Two Packet Forwarding Engines can reach the fabric but not each other
•
Link errors where two Packet Forwarding Engines have connectivity with the fabric
but not through a common plane
Copyright © 2013, Juniper Networks, Inc.
43
PTX Series Packet Transport Switch Software Documentation
When the system detects any unreachable Packet Forwarding Engine destinations,
healing from a traffic black hole is attempted. If the healing fails, the system turns off
the interfaces, thereby stopping the traffic black hole.
The recovery process consists of the following phases:
1.
On T640 and T1600 routers:Fabric plane restart phase: Healing is attempted by
restarting the fabric planes one by one. This phase does not start if the fabric plane
is functioning properly and a single Flexible PIC Concentrator (FPC) is bad.
On PTX Series systems: SIB restart phase: Healing is attempted by restarting the SIBs
one by one. This phase does not start if the SIBs are functioning properly and a single
Flexible PIC Concentrator (FPC) is bad.
2. On T640 and T1600 routers: Fabric plane and FPC restart phase: Healing is attempted
by restarting both the fabric planes and the FPCs. If there are bad FPCs that are unable
to initiate high-speed links to the fabric after reboot, creation of traffic black hole is
limited because no interfaces are created for these FPCs.
On PTX Series systems: SIB and FPC restart phase: Healing is attempted by restarting
both the SIBs and the FPCs. If there are bad FPCs that are unable to initiate high-speed
links to the fabric after reboot, creation of traffic black hole is limited because no
interfaces are created for these FPCs.
3. FPC offline phase: Traffic black hole is limited by turning the FPCs offline and by
turning off interfaces because previous attempts at recovery have failed.
By default, the system limits black-hole time by detecting severely degraded fabric. No
user interaction is necessary.
Related
Documentation
•
Disabling FPC Restart on page 44
•
Router Chassis Configuration Statements
•
degraded on page 109
Disabling FPC Restart
You can disable FPC restart to limit recovery actions from a degraded fabric condition.
On T640 and T1600 routers, only the fabric plane is restarted. On PTX Series systems,
only the Switch Interface Boards (SIBs) are restarted. To disable the restarting of FPCs,
use the action-fpc-restart-disable statement at the [edit chassis fabric degraded] hierarchy
level:
[edit chassis fabric]
degraded {
action-fpc-restart-disable;
}
Whenever FPC restart is disabled, an alarm is raised when there are unreachable
destinations present in the router, and you must restart the FPCs manually.
44
Copyright © 2013, Juniper Networks, Inc.
Chapter 7: Traffic Black Hole Detection and Recovery
To ensure that both the fabric planes (T640 and T1600 routers) or the SIBs (PTX Series
systems) and the FPCs are restarted during the recovery process, do not configure the
action-fpc-restart-disable statement at the [edit chassis fabric degraded] hierarchy level.
Related
Documentation
•
Traffic Black Hole Caused by Fabric Degradation on page 43
•
Router Chassis Configuration Statements
Copyright © 2013, Juniper Networks, Inc.
45
PTX Series Packet Transport Switch Software Documentation
46
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 8
Routing Policy
•
Example: Overriding the Default BGP Routing Policy on Packet Transport
Switches on page 47
Example: Overriding the Default BGP Routing Policy on Packet Transport Switches
•
Understanding the Default BGP Routing Policy on Packet Transport Switches on page 47
•
Example: Overriding the Default BGP Routing Policy on Packet Transport
Switches on page 49
Understanding the Default BGP Routing Policy on Packet Transport Switches
On PTX Series Packet Transport Switches, the default BGP routing policy differs from
that of other Junos OS routing devices.
The PTX Series switches are MPLS transit platforms that do IP forwarding, typically using
interior gateway protocol (IGP) routes. The PTX Series Packet Forwarding Engine (PFE)
can accommodate a relatively small number of variable-length prefixes.
NOTE: A PTX Series switch can support full BGP routes in the control plane
so that it can be used as a route reflector (RR). It can do exact-length lookup
multicast forwarding and can build the multicast forwarding plane for use
by the unicast control plane (for example. to perform a reverse-path
forwarding lookup for multicast).
Given the PFE limitation, the default routing policy for PTX Series switches is for BGP
routes not to be installed in the forwarding table. You can override the default routing
policy and select certain BGP routes to install in the forwarding table.
The default behavior for load balancing and BGP routes on PTX Series switches is as
follows. It has the following desirable characteristics:
•
Allows you to override the default behavior without needing to alter the default policy
directly
•
Reduces the chance of accidental changes that nullify the defaults
•
Sets no flow-control actions, such as accept and reject
Copyright © 2013, Juniper Networks, Inc.
47
PTX Series Packet Transport Switch Software Documentation
The default routing policy on the PTX Series switches is as follows:
user@host# show policy-options | display inheritance defaults no-comments
policy-options {
policy-statement junos-ptx-series-default {
term t1 {
from {
protocol bgp;
rib inet.0;
}
then no-install-to-fib;
}
term t2 {
from {
protocol bgp;
rib inet6.0;
}
then no-install-to-fib;
}
term t3 {
then load-balance per-packet;
}
}
}
routing-options {
forwarding-table {
default-export junos-ptx-series-default;
}
}
user@host# show routing-options forwarding-table default-export | display inheritance
defaults no-comments
default-export junos-ptx-series-default;
As shown here, the junos-ptx-series-default policy is defined in [edit policy-options]. The
policy is applied in [edit routing-options forwarding-table], using the default-export
statement. You can view these default configurations by using the | display inheritance
flag.
Also, you can use the show policy command to view the default policy.
user@host> show policy junos-ptx-series-default
Policy junos-ptx-series-default:
Term t1:
from proto BGP
inet.0
then install-to-fib no
Term t2:
from proto BGP
inet6.0
then install-to-fib no
Term t3:
then load-balance per-packet
CAUTION: We strongly recommend that you do not alter the
junos-ptx-series-default routing policy directly.
48
Copyright © 2013, Juniper Networks, Inc.
Chapter 8: Routing Policy
Junos OS chains the junos-ptx-series-default policy and any user-configured export policy.
Because the junos-ptx-series-default policy does not use flow-control actions, any export
policy that you configure is executed (by way of the implicit next-policy action) for every
route. Thus you can override any actions set by the junos-ptx-series-default policy. If you
do not configure an export policy, the actions set by junos-ptx-series-default policy are
the only actions.
You can use the policy action install-to-fib to override the no-install-to-fib action.
Similarly, you can set the load-balance per-prefix action to override the load-balance
per-packet action.
Example: Overriding the Default BGP Routing Policy on Packet Transport Switches
This example shows how to override the default routing policy on packet transport
switches, such as the PTX Series Packet Transport Switches.
•
Requirements on page 49
•
Overview on page 49
•
Configuration on page 50
•
Verification on page 51
Requirements
This example requires Junos OS Release 12.1 or later.
Overview
By default, the PTX Series switches do not install BGP routes in the forwarding table.
For PTX Series switches, the configuration of the from protocols bgp condition with the
then accept action does not have the usual result that it has on other Junos OS routing
devices. With the following routing policy on PTX Series switches, BGP routes do not get
installed in the forwarding table.
user@host# show policy-options
policy-statement accept-no-install {
term 1 {
from protocol bgp;
then accept;
}
}
user@host# show routing-options
forwarding-table {
export accept-no-install
}
user@host> show route forwarding-table
Routing table: default.inet
Internet:
Destination
Type RtRef Next hop
default
perm
0
Type Index NhRef Netif
rjct
36
2
No BGP routes are installed in the forwarding table. This is the expected behavior.
Copyright © 2013, Juniper Networks, Inc.
49
PTX Series Packet Transport Switch Software Documentation
This example shows how to use the then install-to-fib action to effectively override the
default BGP routing policy.
Configuration
CLI Quick
Configuration
To quickly configure this example, copy the following commands, paste them into a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [edit] hierarchy
level.
set policy-options prefix-list install-bgp 66.0.0.1/32
set policy-options policy-statement override-ptx-series-default term 1 from prefix-list
install-bgp
set policy-options policy-statement override-ptx-series-default term 1 then load-balance
per-prefix
set policy-options policy-statement override-ptx-series-default term 1 then install-to-fib
set routing-options forwarding-table export override-ptx-series-default
Installing Selected BGP Routes in the Forwarding Table
Step-by-Step
Procedure
The following example requires you to navigate various levels in the configuration
hierarchy. For information about navigating the CLI, see Using the CLI Editor in Configuration
Mode in the CLI User Guide.
To install selected BGP routes in the forwarding table:
1.
Configure a list of prefixes to install in the forwarding table.
[edit policy-options prefix-list install-bgp]
user@host# set 66.0.0.1/32
2.
Configure the routing policy, applying the prefix list as a condition.
[edit policy-options policy-statement override-ptx-series-default term 1]
user@host# set from prefix-list install-bgp
user@host# set then install-to-fib
user@host# set then load-balance per-prefix
3.
Apply the routing policy to the forwarding table.
[edit routing-options forwarding-table]
user@host# set export override-ptx-series-default
Results
From configuration mode, confirm your configuration by entering the show policy-options
and show routing-options commands. If the output does not display the intended
configuration, repeat the instructions in this example to correct the configuration.
user@host# show policy-options
prefix-list install-bgp {
66.0.0.1/32;
}
policy-statement override-ptx-series-default {
term 1 {
from {
prefix-list install-bgp;
}
then {
50
Copyright © 2013, Juniper Networks, Inc.
Chapter 8: Routing Policy
load-balance per-prefix;
install-to-fib;
}
}
}
user@host# show routing-options
forwarding-table {
export override-ptx-series-default;
}
If you are done configuring the device, enter commit from configuration mode.
Verification
Confirm that the configuration is working properly.
Verifying That the Selected Route Is Installed in the Forwarding Table
Purpose
Action
Make sure that the configured policy overrides the default policy
From operational mode, enter the show route forwarding-table command.
user@host> show route forwarding-table destination 66.0.0.1
Internet:
Destination
Type RtRef Next hop
Type Index NhRef
66.0.0.1/32
user
0
indr 2097159
ulst 2097156
5.1.0.2
ucst
574
1
5.2.0.2
ucst
575
1
Meaning
Related
Documentation
Netif
3
2
et-6/0/0.1
et-6/0/0.2
This output shows that the route to 66.0.0.1/32 is installed in the forwarding table.
•
Default Routing Policies and Actions
•
Default Import and Export Policies for Protocols
•
Examples: Configuring BGP Multipath
Copyright © 2013, Juniper Networks, Inc.
51
PTX Series Packet Transport Switch Software Documentation
52
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 9
Class of Service
•
Understanding CoS CLI Configuration Statements on PTX Series Packet Transport
Switches on page 53
•
Configuring Up to 16 Forwarding Classes on page 56
•
Configuring Drop Profile Maps for Schedulers on page 62
•
Example: Configuring Excess Rate for PTX Series Packet Transport Switches on page 63
•
Hardware Capabilities and Limitations on page 69
Understanding CoS CLI Configuration Statements on PTX Series Packet Transport
Switches
PTX Series Packet Transport Switches have no new Junos OS CLI configuration
statements. However, some statements or statement options supported on other
platforms are not supported or may not have effect on PTX Series devices. These
exceptions are summarized here.
[edit chassis] Hierarchy Level
The following statement is not applicable to PTX Series Packet Transport Switches.
There are always eight queues available. However, if there is a requirement to use only
four of eight queues, you can do this by configuring the forwarding class to queue mapping,
as appropriate.
[edit chassis fpc slot-number pic pic-number],
max-queues-per-interface (4 | 8);
The following CLI is not applicable to PICs supported on PTX Series Packet Transport
Switches:
[edit chassis fpc slot-number pic pic-number],
q-pic-large-buffer {
[large-scale | small-scale]
}
On PTX Series Packet Transport Switches, buffer occupancy is computed as weighted
average. However, configuration of weight at the PIC level is not supported. The default
weights are applied.
[edit chassis fpc slot-number pic pic-number],
red-buffer-occupancy {
Copyright © 2013, Juniper Networks, Inc.
53
PTX Series Packet Transport Switch Software Documentation
weighted-averaged [ instant-usage-weight-exponent ] weight-value;
}
The following CLI is not applicable to PICs supported on PTX Series Packet Transport
Switches:
[edit chassis fpc slot-number pic pic-number],
traffic-manager {
egress-shaping-overhead number;
ingress-shaping-overhead number;
mode session-shaping;
}
[edit class-of-service] Hierarchy Level
The following CLI is not applicable to PTX Series Packet Transport Switches because
there are no separate fabric queues and egress queues:
fabric {
scheduler-map {
priority (high | low) scheduler scheduler-name;
}
}
The following CLI does not support the priority and policing-priority options.
forwarding-classes {
class queue-num queue-number priority (high | low);
queue queue-number class-name priority (high | low) [ policing-priority (premium |
normal) ];
}
The following statements are not supported on PTX Series Packet Transport Switches:
•
inet-precedence rewrite
•
Rewrite of both exp and inet-precedence fields for VPN and non-VPN traffic that use
the mpls-inet-both and mpls-inet-both-non-vpn protocol types.
•
exp-push-push-push and exp-swap-push-push rules
•
input-scheduler-map and input-shaping-rate
•
The physical interface scheduler is applied on the Packet Forwarding Engine, hence
the scheduler-map-chassis statement is not applicable.
interfaces {
interface-name {
input-scheduler-map map-name;
input-shaping-rate rate;
scheduler-map-chassis map-name;
unit logical-unit-number {
rewrite-rules{
inet-precedence (rewrite-name | default) protocol
protocol-types;
exp (write-name | default) protocol protocol-types;
exp-push-push-push default;
exp-swap-push-push default;
54
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
}
}
}
}
In the following CLI, only the inet-precedence statement is not supported.
rewrite-rules {
(dscp | dscp-ipv6 | exp | ieee-802.1 |ieee-802.1ad |inet-precedence) rewrite-name {
import (rewrite-name | default);
forwarding-class class-name {
loss-priority level code-point (alias | bits);
}
}
}
Classifiers on routing instances are not supported on PTX Series Packet Transport
Switches because L3VPN is not supported. Hence, the following CLI is not applicable.
[edit class-of-service]
routing-instances routing-instance-name {
classifiers {
exp (classifier-name | default);
dscp (classifier-name | default);
dscp-ipv6 (classifier-name | default);
}
}
The following limitations apply to statements under schedulers on PTX Series Packet
Transport Switches:
•
protocol (non-tcp | tcp) is not supported for drop-profile-map. The any option is
supported.
•
excess-priority is not supported.
•
rate-limit is supported for transmit-rate. It is applied only when schedulers are configured
as strict-high.
schedulers (Class of Service) {
scheduler-name {
buffer-size (percent percentage | remainder | temporal microseconds);
drop-profile-map loss-priority (any | low | medium-low | medium-high
high) protocol (any ) drop-profile profile-name;
priority priority-level;
transmit-rate (rate | percent percentage | remainder) <exact | rate-limit>;
}
}
NOTE: Configurations that are supported only on Gigabit Ethernet IQ PICs,
channelized IQ PICs, and so forth are not applicable to PTX Series Packet
Transport Switches. These PICs are not supported on this platform. Those
CLIs are not listed here.
[edit firewall] Hierarchy Level
Copyright © 2013, Juniper Networks, Inc.
55
PTX Series Packet Transport Switch Software Documentation
In the following CLI, the dscp clause is not supported.
family family-name {
filter filter-name {
term term-name {
from {
match-conditions;
}
then {
dscp 0;
forwarding-class class-name;
loss-priority (high | low);
three-color-policer {
(single-rate | two-rate) policer-name;
}
}
}
}
Configuring Up to 16 Forwarding Classes
By default on all routers, four output queues are mapped to four forwarding classes, as
shown in the topic Default Forwarding Classes. On Juniper Networks J Series Services
Routers, M120 and M320 Multiservice Edge Routers, and T Series Core Routers, you can
configure more than four forwarding classes and queues. For information about configuring
J Series routers, see the J Series router documentation.
NOTE: You cannot use CoS-based forwarding features if you configure more
than eight forwarding classes on the device.
On M120, M320, MX Series, T Series routers, EX Series switches and PTX Series Packet
Transport Switches, you can configure up to 16 forwarding classes and eight queues,
with multiple forwarding classes assigned to single queues. The concept of assigning
multiple forwarding classes to a queue is sometimes referred to as creating
forwarding-class aliases. This section explains how to configure M320 and T Series routers.
Mapping multiple forwarding classes to single queues is useful. Suppose, for example,
that forwarding classes are set based on multifield packet classification, and the multifield
classifiers are different for core-facing interfaces and customer-facing interfaces. Suppose
you need four queues for a core-facing interface and five queues for a customer-facing
interface, where fc0 through fc4 correspond to the classifiers for the customer-facing
interface, and fc5 through fc8 correspond to classifiers for the core-facing interface, as
shown in Figure 3 on page 56.
Figure 3: Customer-Facing and Core-Facing Forwarding Classes
56
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
In this example, there are nine classifiers and, therefore, nine forwarding classes. The
forwarding class-to-queue mapping is shown in Table 5 on page 57.
Table 5: Sample Forwarding Class-to-Queue Mapping
Forwarding Class Names
Queue Number
fc0
0
fc5
1
fc1
fc6
fc2
2
fc7
fc3
3
fc8
fc4
4
To configure up to 16 forwarding classes, include the class and queue-num statements
at the [edit class-of-service forwarding-classes] hierarchy level:
[edit class-of-service forwarding-classes]
class class-name queue-num queue-number;
You can configure up 16 different forwarding-class names. The corresponding output
queue number can be from 0 through 7. Therefore, you can map multiple forwarding
classes to a single queue. If you map multiple forwarding classes to a queue, the multiple
forwarding classes must refer to the same scheduler (at the [edit class-of-service
scheduler-maps map-name forwarding-class class-name scheduler scheduler-name]
hierarchy level).
When you configure up to 16 forwarding classes, you can use them as you can any other
forwarding class—in classifiers, schedulers, firewall filters (multifield classifiers), policers,
and rewrite rules.
When you configure up to 16 forwarding classes, the following limitations apply:
•
The class and queue statements at the [edit class-of-service forwarding-classes]
hierarchy level are mutually exclusive. In other words, you can include one or the other
of the following configurations, but not both:
[edit class-of-service forwarding-classes]
queue queue-number class-name;
[edit class-of-service forwarding-classes]
class class-name queue-num queue-number;
Copyright © 2013, Juniper Networks, Inc.
57
PTX Series Packet Transport Switch Software Documentation
•
On T Series routers only, when you configure IEEE 802.1p rewrite marking on Gigabit
Ethernet IQ, Gigabit Ethernet IQ2, Gigabit Ethernet Enhanced IQ (IQE), and Gigabit
Ethernet Enhanced IQ2 (IQ2E) PICs, you cannot configure more than eight forwarding
classes. This limitation does not apply to M Series routers. On M Series routers, you
can configure up to 16 forwarding classes when you configure IEEE 802.1p rewrite
marking on any of these PICs.
•
For GRE and IP-IP tunnels, IP precedence and DSCP rewrite marking of the inner header
do not work with more than eight forwarding classes.
•
When you use CoS-based forwarding features, you cannot configure more than eight
forwarding classes with a forwarding policy. However, if you try to configure CoS-based
forwarding with more than eight forwarding classes configured, commit fails with a
message. Therefore, you can configure CBF on a router with eight or less than eight
forwarding classes only. Under this condition, the forwarding class to queue mapping
can be either one-to-one or one-to-many.
•
A scheduler map that maps eight different forwarding classes to eight different
schedulers can only be applied to interfaces that support eight queues. If you apply
this type of scheduler map to an interface that only supports four queues, then the
commit will fail.
•
We recommend that you configure the statements changing PICs to support eight
queues and then applying an eight queue scheduler map in two separate steps.
Otherwise, the commit might succeed but the PIC might not have eight queues when
the scheduler map is applied, generating an error.
You can determine the ID number assigned to a forwarding class by issuing the show
class-of-service forwarding-class command. You can determine whether the classification
is fixed by issuing the show class-of-service forwarding-table classifier mapping command.
In the command output, if the Table Type field appears as Fixed, the classification is fixed.
For more information about fixed classification, see Applying Forwarding Classes to
Interfaces.
For information about configuring eight forwarding classes on ATM2 IQ interfaces, see
Enabling Eight Queues on ATM Interfaces.
This section discusses the following topics:
•
Enabling Eight Queues on Interfaces on page 58
•
Multiple Forwarding Classes and Default Forwarding Classes on page 59
•
PICs Restricted to Four Queues on page 60
•
Examples: Configuring Up to 16 Forwarding Classes on page 61
Enabling Eight Queues on Interfaces
By default, Intelligent Queuing (IQ), Intelligent Queuing 2 (IQ2), Intelligent Queuing
Enhanced (IQE), and Intelligent Queuing 2 Enhanced (IQ2E) PICs on M320 and T Series
routers are restricted to a maximum of four egress queues per interface. To configure a
maximum of eight egress queues on these interfaces, include the
max-queues-per-interface statement at the [edit chassis fpc slot-number pic pic-number]
hierarchy level:
58
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
[edit chassis fpc slot-number pic pic-number]
max-queues-per-interface (4 | 8);
On a TX Matrix or TX Matrix Plus router, include the max-queues-per-interface statement
at the [edit chassis lcc number fpc slot-number pic pic-number] hierarchy level:
[edit chassis lcc number fpc slot-number pic pic-number]
max-queues-per-interface (4 | 8);
The numerical value can be 4 or 8.
For Juniper Networks J Series routers, this statement is not supported. J Series routers
always have eight queues available.
NOTE: In addition to configuring eight queues at the [edit chassis] hierarchy
level, the configuration at the [edit class-of-service] hierarchy level must
support eight queues per interface.
The maximum number of queues per IQ PIC can be 4 or 8. If you include the
max-queues-per-interface statement, all ports on the IQ PIC use configured mode and
all interfaces on the IQ PIC have the same maximum number of queues.
To determine how many queues an interface supports, you can check the CoS queues
output field of the show interfaces interface-name extensive command:
user@host> show interfaces so-1/0/0 extensive
CoS queues: 8 supported
If you include the max-queues-per-interface 4 statement, you can configure all four ports
and configure up to four queues per port.
For 4-port OC3c/STM1 Type I and Type II PICs on M320 and T Series routers, when you
include the max-queues-per-interface 8 statement, you can configure up to eight queues
on ports 0 and 2. After you commit the configuration, the PIC goes offline and comes
back online with only ports 0 and 2 operational. No interfaces can be configured on ports
1 and 3.
For Quad T3 and Quad E3 PICs, when you include the max-queues-per-interface 8
statement, you can configure up to eight queues on ports 0 and 2. After you commit the
configuration, the PIC goes offline and comes back online with only ports 0 and 2
operational. No interfaces can be configured on ports 1 and 3.
When you include the max-queues-per-interface statement and commit the configuration,
all physical interfaces on the IQ PIC are deleted and readded. Also, the PIC is taken offline
and then brought back online immediately. You do not need to take the PIC offline and
online manually. You should change modes between four queues and eight queues only
when there is no active traffic going to the IQ PIC.
Multiple Forwarding Classes and Default Forwarding Classes
For queues 0 through 3, if you assign multiple forwarding classes to a single queue, default
forwarding class assignment works as follows:
Copyright © 2013, Juniper Networks, Inc.
59
PTX Series Packet Transport Switch Software Documentation
•
The first forwarding class that you assign to queue 0 acquires the default BE
classification and scheduling.
•
The first forwarding class that you assign to queue 1 acquires the default EF
classification and scheduling.
•
The first forwarding class that you assign to queue 2 acquires the default AF
classification and scheduling.
•
The first forwarding class that you assign to queue 3 acquires the default NC
classification and scheduling.
Of course you can override the default classification and scheduling by configuring custom
classifiers and schedulers.
If you do not explicitly map forwarding classes to queues 0 through 3, then the respective
default classes are automatically assigned to those queues. When you are counting the
16 forwarding classes, you must include in the total any default forwarding classes
automatically assigned to queues 0 through 3. As a result, you can map up to 13 forwarding
classes to a single queue when the single queue is queue 0, 1, 2, or 3. You can map up to
12 forwarding classes to a single queue when the single queue is queue 4, 5, 6, or 7. In
summary, there must be at least one forwarding class each (default or otherwise)
assigned to queue 0 through 3, and you can assign the remaining 12 forwarding classes
(16–4) to any queue.
For example, suppose you assign two forwarding classes to queue 0 and you assign no
forwarding classes to queues 1 through 3. The software automatically assigns one default
forwarding class each to queues 1 through 3. This means 11 forwarding classes (16–5)
are available for you to assign to queues 4 through 7.
For more information about forwarding class defaults, see Default Forwarding Classes.
PICs Restricted to Four Queues
Some Juniper Networks T Series Core Router PICs support up to 16 forwarding classes
and are restricted to 4 queues. Contact Juniper Networks customer support for a current
list of T Series router PICs that are restricted to four queues. To determine how many
queues an interface supports, you can check the CoS queues output field of the show
interfaces interface-name extensive command:
user@host> show interfaces so-1/0/0 extensive
CoS queues: 8 supported
By default, for T Series router PICs that are restricted to four queues, the router overrides
the global configuration based on the following formula:
Qr = Qd mod Rmax
Qr is the queue number assigned if the PIC is restricted to four queues.
Qd is the queue number that would have been mapped if this PIC were not restricted.
Rmax is the maximum number of restricted queues available. Currently, this is four.
60
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
For example, assume you map the forwarding class ef to queue 6. For a PIC restricted to
four queues, the queue number for forwarding class ef is Qr = 6 mod 4 = 2.
To determine which queue is assigned to a forwarding class, use the show class-of-service
forwarding-class command from the top level of the CLI. The output shows queue
assignments for both global queue mappings and restricted queue mappings:
user@host> show class-of-service forwarding-class
Forwarding class
Queue
Restricted Queue
be
0
2
ef
1
2
assured-forwarding
2
2
network-control
3
3
Fabric priority
low
low
low
low
For T Series router PICs restricted to four queues, you can override the formula-derived
queue assignment by including the restricted-queues statement at the [edit
class-of-service] hierarchy level:
[edit class-of-service]
restricted-queues {
forwarding-class class-name queue queue-number;
}
You can configure up to 16 forwarding classes. The output queue number can be from 0
through 3. Therefore, for PICs restricted to four queues, you can map multiple forwarding
classes to single queues. If you map multiple forwarding classes to a queue, the multiple
forwarding classes must refer to the same scheduler. This requirement applies to all
PICs. The class name you configure at the [edit class-of-service restricted-queues]
hierarchy level must be either a default forwarding class name or a forwarding class you
configure at the [edit class-of-service forwarding-classes] hierarchy level.
Examples: Configuring Up to 16 Forwarding Classes
Configure 16 forwarding classes:
Configuring 16
Forwarding Classes
[edit class-of-service]
forwarding-classes {
class fc0 queue-num 0;
class fc1 queue-num 0;
class fc2 queue-num 1;
class fc3 queue-num 1;
class fc4 queue-num 2;
class fc5 queue-num 2;
class fc6 queue-num 3;
class fc7 queue-num 3;
class fc8 queue-num 4;
class fc9 queue-num 4;
class fc10 queue-num 5;
class fc11 queue-num 5;
class fc12 queue-num 6;
class fc13 queue-num 6;
class fc14 queue-num 7;
class fc15 queue-num 7;
}
For PICs restricted to four queues, map four forwarding classes to each queue:
Copyright © 2013, Juniper Networks, Inc.
61
PTX Series Packet Transport Switch Software Documentation
Restricted Queues:
Mapping Two
Forwarding Classes to
Each Queue
[edit class-of-service]
restricted-queues {
forwarding-class fc0 queue 0;
forwarding-class fc1 queue 0;
forwarding-class fc2 queue 0;
forwarding-class fc3 queue 0;
forwarding-class fc4 queue 1;
forwarding-class fc5 queue 1;
forwarding-class fc6 queue 1;
forwarding-class fc7 queue 1;
forwarding-class fc8 queue 2;
forwarding-class fc9 queue 2;
forwarding-class fc10 queue 2;
forwarding-class fc11 queue 2;
forwarding-class fc12 queue 3;
forwarding-class fc13 queue 3;
forwarding-class fc14 queue 3;
forwarding-class fc15 queue 3;
}
If you map multiple forwarding classes to a queue, the multiple forwarding classes must
refer to the same scheduler:
Configuring a
Scheduler Map
Applicable to an
Interface Restricted to
Four Queues
[edit class-of-service]
scheduler-maps {
interface-restricted {
forwarding-class be scheduler Q0;
forwarding-class ef scheduler Q1;
forwarding-class ef1 scheduler Q1;
forwarding-class ef2 scheduler Q1;
forwarding-class af1 scheduler Q2;
forwarding-class af scheduler Q2;
forwarding-class nc scheduler Q3;
forwarding-class nc1 scheduler Q3;
}
}
[edit class-of-service]
restricted-queues {
forwarding-class be queue 0;
forwarding-class ef queue 1;
forwarding-class ef1 queue 1;
forwarding-class ef2 queue 1;
forwarding-class af queue 2;
forwarding-class af1 queue 2;
forwarding-class nc queue 3;
forwarding-class nc1 queue 3;
}
Configuring Drop Profile Maps for Schedulers
Drop-profile maps associate drop profiles with a scheduler. The map examines the current
loss priority setting of the packet (high, low, or any) and assigns a drop profile according
to these values. For example, you can specify that all TCP packets with low loss priority
62
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
are assigned a drop profile that you name low-drop. You can associate multiple
drop-profile maps with a single queue.
The scheduler drop profile defines the drop probabilities across the range of delay-buffer
occupancy, thereby supporting the RED process. Depending on the drop probabilities,
RED might drop packets aggressively long before the buffer becomes full, or it might
drop only a few packets even if the buffer is almost full. For information on how to
configure drop profiles, see RED Drop Profiles Overview.
By default, the drop profile is mapped to packets with low PLP and any protocol type.
To configure how packet types are mapped to a specified drop profile, include the
drop-profile-map statement at the [edit class-of-service schedulers scheduler-name]
hierarchy level:
[edit class-of-service schedulers scheduler-name ]
drop-profile-map loss-priority (any | low | medium-low | medium-high | high)protocol (any
| non-tcp | tcp) drop-profile profile-name;
The map sets the drop profile for a specific PLP and protocol type. The inputs for the
map are the PLP and the protocol type. The output is the drop profile. For more information
about how CoS maps work, see CoS Inputs and Outputs Overview.
NOTE: On Juniper Network MX Series 3D Universal Edge Routers, T4000
Core Routers, EX Series switches, and PTX Series Packet Transport Switches,
you can configure only the any option for the protocol statement.
For each scheduler, you can configure separate drop profile maps for each loss priority.
You can configure a maximum of 32 different drop profiles.
Related
Documentation
•
Configuring RED Drop Profiles
Example: Configuring Excess Rate for PTX Series Packet Transport Switches
You can configure excess rate to customize the distribution of available excess bandwidth
among the queues for PTX Series Packet Transport Switches. When excess rate is not
configured, the excess bandwidth available is distributed in proportion to the transmit
rates allocated to the queues.
•
Requirements on page 63
•
Overview on page 64
•
Configuration on page 64
•
Verification on page 69
Requirements
This example uses the following hardware and software components:
•
One PTX Series Packet Transport Switch
Copyright © 2013, Juniper Networks, Inc.
63
PTX Series Packet Transport Switch Software Documentation
•
Junos OS Release 12.1X48R2 or later
Overview
This set of examples illustrates how you configure schedulers for the PTX Series Packet
Transport Switch to distribute the remaining bandwidth (excess rate) among the
configured queues.
When you configure excess rate, use the following guidelines:
•
The transmit-rate statements of the configured schedulers can add up to at most
100%.
•
All queues on the PTX Series Packet Transport Switch have the same excess priority.
Excess priority configuration is not supported.
•
If a strict-high priority queue is configured and is rate-limited, this queue gets the
rate-limited bandwidth first. Then the configured transmit-rate value of other queues
is met (regardless of queue priority), and finally the excess bandwidth is distributed in
proportion to the configured excess-rate values.
NOTE: We recommend that you configure rate limit on strict-high queues
because the other queues may not meet their guaranteed bandwidths. See
transmit-rate.
Configuration
To configure excess rate, perform one or more of these tasks:
•
Configuring Schedulers Without Specifying Excess Rate on page 64
•
Configuring Schedulers by Specifying Excess Rate on page 66
•
Configuring Schedulers to Control Excess Rate for Non-High Priority Queues on page 67
Configuring Schedulers Without Specifying Excess Rate
CLI Quick
Configuration
To quickly configure this example, copy the following commands, paste them into a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [edit] hierarchy
level.
set class-of-schedule schedulers sched_queue_0 transmit-rate percent 20
set class-of-schedule schedulers sched_queue_1 transmit-rate percent 40
set class-of-schedule schedulers sched_queue_2 transmit-rate percent 10
set class-of-schedule schedulers sched_queue_3 transmit-rate percent 10
64
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
Step-by-Step
Procedure
In this example, four queues are configured and each associated scheduler is assigned
the indicated transmit rate. Across the four queues, the transmit rate totals to 80%. No
excess rate is configured. Assuming that each queue has loads greater than or equal to
the configured transmit rate, the remaining 20% of the bandwidth is distributed in
proportion to the configured transmit rates (20:40:10:10):
•
sched_queue_0—5% (20% of the guaranteed rate plus 5% of the remaining bandwidth
is 25%)
•
sched_queue_1—10% (40% of the guaranteed rate plus 10% of the remaining
bandwidth is 50%)
•
sched_queue_2—2.5% (10% of the guaranteed rate plus 2.5% of the remaining
bandwidth is 12.5%)
•
sched_queue_3—2.5% (10% of the guaranteed rate plus 2.5% of the remaining
bandwidth is 12.5%)
The following example requires you to navigate various levels in the configuration
hierarchy. For instructions on how to do that, see Using the CLI Editor in Configuration
Mode in the CLI User Guide.
To configure the schedulers:
1.
Create the scheduler for queue 0:
[edit class-of-schedule]
user@host# set schedulers sched_queue_0 transmit-rate percent 20
2.
Create the scheduler for queue 1:
[edit class-of-schedule]
user@host# set schedulers sched_queue_1 transmit-rate percent 40
3.
Create the scheduler for queue 2:
[edit class-of-schedule]
user@host# set schedulers sched_queue_2 transmit-rate percent 10
4.
Create the scheduler for queue 3:
[edit class-of-schedule]
user@host# set schedulers sched_queue_3 transmit-rate percent 10
Results
From configuration mode, confirm your configuration by entering the show class-of-service
schedulers command. If the output does not display the intended configuration, repeat
the configuration instructions in this example to correct it.
sched_queue_0 {
transmit-rate percent 20;
}
sched_queue_1 {
transmit-rate percent 40;
}
sched_queue_2 {
transmit-rate percent 10;
}
Copyright © 2013, Juniper Networks, Inc.
65
PTX Series Packet Transport Switch Software Documentation
sched_queue_3 {
transmit-rate percent 10;
}
If you are done configuring the device, enter commit from configuration mode.
Configuring Schedulers by Specifying Excess Rate
CLI Quick
Configuration
To quickly configure this example, copy the following commands, paste them into a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [edit] hierarchy
level.
set class-of-schedule schedulers sched_queue_0 transmit-rate percent 25
set class-of-schedule schedulers sched_queue_0 excess-rate percent 25
set class-of-schedule schedulers sched_queue_1 transmit-rate percent 25
set class-of-schedule schedulers sched_queue_1 excess-rate percent 50
set class-of-schedule schedulers sched_queue_2 transmit-rate percent 25
set class-of-schedule schedulers sched_queue_3 transmit-rate percent 25
Step-by-Step
Procedure
In this example, four schedulers are configured and each is assigned a transmit rate of
25%. Queue 0 is configured with 40% and queue 1 with 60% of the excess rate. If the
offered load through queue 2 is only 10%, the remaining bandwidth is distributed as:
queue excess rate / total excess rate * remaining bandwidth percentage. If a queue has
transmit rate configured but not excess rate, the excess rate for that queue is 1. In this
example, the excess rate ratio is 25:50:1:1, which yields the following distribution of the
15% remaining bandwidth from queue 2:
•
sched_queue_0—4.93% (25 / 76 * 15%)
•
sched_queue_1—9.87% (50 / 76 * 15%)
•
sched_queue_3—0.197% (1 / 76 * 15%)
When the offered load on queue 2 increases to 25% or greater, the other queues get only
their configured transmit rates.
The following example requires you to navigate various levels in the configuration
hierarchy. For instructions on how to do that, see Using the CLI Editor in Configuration
Mode in the CLI User Guide.
To configure the schedulers:
1.
Create the scheduler for queue 0:
[edit class-of-schedule]
user@host# set schedulers sched_queue_0 transmit-rate percent 25
user@host# set schedulers sched_queue_0 excess-rate percent 25
2.
Create the scheduler for queue 1:
[edit class-of-schedule]
user@host# set schedulers sched_queue_1 transmit-rate percent 25
user@host# set schedulers sched_queue_1 excess-rate percent 50
3.
66
Create the scheduler for queue 2:
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
[edit class-of-schedule]
user@host# set schedulers sched_queue_2 transmit-rate percent 25
4.
Create the scheduler for queue 3:
[edit class-of-schedule]
user@host# set schedulers sched_queue_3 transmit-rate percent 25
Results
From configuration mode, confirm your configuration by entering the show class-of-service
schedulers command. If the output does not display the intended configuration, repeat
the configuration instructions in this example to correct it.
sched_queue_0 {
transmit-rate percent 25;
excess-rate percent 25;
}
sched_queue_1 {
transmit-rate percent 25;
excess-rate percent 50;
}
sched_queue_2 {
transmit-rate percent 25;
}
sched_queue_3 {
transmit-rate percent 25;
}
If you are done configuring the device, enter commit from configuration mode.
Configuring Schedulers to Control Excess Rate for Non-High Priority Queues
CLI Quick
Configuration
To quickly configure this example, copy the following commands, paste them into a text
file, remove any line breaks, change any details necessary to match your network
configuration, and then copy and paste the commands into the CLI at the [edit] hierarchy
level.
set class-of-schedule schedulers sched_queue_0 transmit-rate percent 90
set class-of-schedule schedulers sched_queue_0 priority high
set class-of-schedule schedulers sched_queue_1 transmit-rate percent 10
set class-of-schedule schedulers sched_queue_1 priority low
set class-of-schedule schedulers sched_queue_2 excess-rate percent 10
set class-of-schedule schedulers sched_queue_3 excess-rate percent 30
Copyright © 2013, Juniper Networks, Inc.
67
PTX Series Packet Transport Switch Software Documentation
Step-by-Step
Procedure
In this example, the scheduler for queue 0 is configured to transmit up to 90% of traffic
if there is enough offered load. When the traffic to queue 0 is less than 90%, excess rate
is configured to distribute the remaining bandwidth in the ratio 1:1:10:30 (when the offered
load on queue 1 is greater than 10%), which yields the following distribution of the
remaining bandwidth from queue 0:
•
sched_queue_1—0.0244 * x% (1 / 41 * remaining bandwidth (x)%)
•
sched_queue_2—0.244 * x% (10 / 41 * remaining bandwidth (x)%)
•
sched_queue_3—0.732 * x% (30 / 41 * remaining bandwidth (x)%)
NOTE: Although the transmit-rate values on queues can add up to at most
100%, the excess-rate value does not have this restriction because it is a ratio.
The following example requires you to navigate various levels in the configuration
hierarchy. For instructions on how to do that, see Using the CLI Editor in Configuration
Mode in the CLI User Guide.
To configure the schedulers:
1.
Create the scheduler for queue 0:
[edit class-of-schedule]
user@host# set schedulers sched_queue_0 transmit-rate percent 90
user@host# set schedulers sched_queue_0 priority high
2.
Create the scheduler for queue 1:
[edit class-of-schedule]
user@host# set schedulers sched_queue_1 transmit-rate percent 10
user@host# set schedulers sched_queue_1 priority low
3.
Create the scheduler for queue 2:
[edit class-of-schedule]
user@host# set schedulers sched_queue_2 excess-rate percent 10
4.
Create the scheduler for queue 3:
[edit class-of-schedule]
user@host# set schedulers sched_queue_3 excess-rate percent 30
Results
From configuration mode, confirm your configuration by entering the show class-of-service
schedulers command. If the output does not display the intended configuration, repeat
the configuration instructions in this example to correct it.
sched_queue_0 {
transmit-rate percent 90;
priority high;
}
sched_queue_1 {
transmit-rate percent 10;
priority low;
68
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
}
sched_queue_2 {
excess-rate percent 10;
}
sched_queue_3 {
excess-rate percent 30;
}
If you are done configuring the device, enter commit from configuration mode.
Verification
Verifying the Excess Rate Configuration
Purpose
Action
Meaning
Related
Documentation
Verify that the excess rate configuration is producing the results you expect.
From operational mode, enter the show interfaces queue interface command for the
physical interface to verify.
The show command output lists the traffic by queue and forwarding class names. Verify
that the Bytes field for active queues on the specified physical interface match the
proportions you expect from the excess rate configuration.
•
Schedulers Overview
•
Configuring a Scheduler
•
excess-rate
•
Table 7 on page 76
Hardware Capabilities and Limitations
For basic MX Series router architecture information, see Packet Flow on MX Series Ethernet
Services Routers and EX Series Switches. For CoS hardware capabilities about other
routers, see these sections:
•
CoS Hardware Capabilities and Limitations on M Series and T Series Routers on page 69
•
CoS Hardware Capabilities and Limitations on PTX Series Packet Transport
Switches on page 76
CoS Hardware Capabilities and Limitations on M Series and T Series Routers
Juniper Networks M320 Multiservice Edge Routers and T Series Core Routers, as well as
M Series Multiservice Edge Routers with enhanced Flexible PIC Concentrators (FPCs),
have more CoS capabilities than M Series routers that use other FPC models.
Table 6 on page 70 lists some of these the differences.
Copyright © 2013, Juniper Networks, Inc.
69
PTX Series Packet Transport Switch Software Documentation
To determine whether your M Series router is equipped with an enhanced FPC, issue the
show chassis hardware command. The presence of an enhanced FPC is designated by
the E-FPC description in the output.
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 02
710-008761
Power Supply 0
REV 04
740-008537
Routing Engine
REV 01
740-008846
CFEB
REV 02
750-009492
FPC 0
PIC 0
REV 04
750-003163
PIC 1
REV 04
750-003163
PIC 2
REV 04
750-003163
PIC 3
REV 02
750-003163
FPC 1
PIC 2
REV 01
750-009487
PIC 3
REV 01
750-009098
Serial number
31959
CA0209
PD10272
1000396803
CA0166
HJ6416
HJ6423
HJ6421
HJ0425
HM2275
CA0142
Description
M7i
M7i Midplane
AC Power Supply
RE-5.0
Internet Processor IIv1
E-FPC
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
E-FPC
ASP - Integrated
2x F/E, 100 BASE-TX
Many operations involving the DSCP bits depend on the router and PIC type. For example,
some DSCP classification configurations for MPLS and Internet can only be performed
on M120 routers, M320 routers with Enhanced Type III FPCs, and MX Series routers only.
Table 6 on page 70 summarizes CoS features and limitations on M Series and T Series
routers.
NOTE: The T4000 router supports the lowest of the scaling numbers for
classifiers, rewrite rules, and WRED associated with MX Series and T Series
routers.
Table 6: CoS Features and Limitations on M Series and T Series Routers
Interface Hardware
Feature
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
Details
Classifiers
70
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
Table 6: CoS Features and Limitations on M Series and T Series Routers (continued)
Interface Hardware
Feature
Maximum
number per FPC
or PIC
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
1
8
64
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
64 or 58
total
Details
On IQ2 and IQ2E PICs, the CoS classification and CoS
rewrite processes are off-loaded from the FPC to the PIC,
so the capabilities and limitations of these types of PICs
must be taken into consideration.
For M Series router FPCs, the one-classifier limit includes
the default IP precedence classifier. If you create a new
classifier and apply it to an interface, the new classifier
does not override the default classifier for other interfaces
on the same FPC. In general, the first classifier associated
with a logical interface is used. The default classifier can
be replaced only when a single interface is associated with
the default classifier.
Only 58 user-configurable BA classifiers can be attached
to logical interfaces on Type-4 FPCs in T640, T1600, or
T4000 routers, because six default classifiers are
automatically attached to the interfaces. When interfaces
on the FPC come up, three default classifiers are installed
in the FPC ASIC table: IPv4 and IPv6, MPLS tagging, and
multiservices. Next, three default BA classifiers are
installed: DSCP IPv6 (9), and MPLS EXP (10), and IP
precedence (13).
For user-defined BA classifier types (dscp, dscp-ipv6,
ieee-802.1p, ieee-802.1ad, inet-precedence, and mpls-exp),
you can attach a maximum of 32 classifiers of the same
type (including one default classifier) to a logical interface
hosted on a Type-4 FPC in a T640, T1600, or T4000
router.
You can attach a maximum of 8 user-configured BA
classifiers of the same type to a logical interface hosted
on an Enhanced Scaling FPC in a T640, T1600, or T4000
router.
dscp
No
Yes
Copyright © 2013, Juniper Networks, Inc.
Yes
Yes
On all routers, you cannot configure IP precedence and
DiffServ code point (DSCP) classifiers on a single logical
interface, because both apply to IPv4 packets.
71
PTX Series Packet Transport Switch Software Documentation
Table 6: CoS Features and Limitations on M Series and T Series Routers (continued)
Interface Hardware
Feature
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
dscp-ipv6
No
Yes
Yes
Yes
Details
For T Series routers, you can apply separate classifiers for
IPv4 and IPv6 packets per logical interface.
For M Series router enhanced FPCs, you cannot apply
separate classifiers for IPv4 and IPv6 packets. Classifier
assignment works as follows:
ieee-802.1p
No
Yes
Yes
Yes
•
If you assign a DSCP classifier only, IPv4 and IPv6
packets are classified using the DSCP classifier.
•
If you assign an IP precedence classifier only, IPv4 and
IPv6 packets are classified using the IP precedence
classifier. The lower three bits of the DSCP field are
ignored because IP precedence mapping requires the
upper three bits only.
•
If you assign either the DSCP or the IP precedence
classifier in conjunction with the DSCP IPv6 classifier,
the commit fails.
•
If you assign a DSCP IPv6 classifier only, IPv4 and IPv6
packets are classified using the DSCP IPv6 classifier,
but the commit displays a warning message.
On M Series router enhanced FPCs and T Series routers,
if you associate an IEEE 802.1p classifier with a logical
interface, you cannot associate any other classifier with
that logical interface.
For most PICs, if you apply an IEEE 802.1p classifier to a
logical interface, you cannot apply non-IEEE classifiers on
other logical interfaces on the same physical interface.
This restriction does not apply to Gigabit Ethernet IQ2
PICs.
inet-precedence
Yes
Yes
Yes
Yes
On all routers, you cannot assign IP precedence and DSCP
classifiers to a single logical interface, because both apply
to IPv4 packets.
mpls-exp
Yes
Yes
Yes
Yes
For M Series router FPCs, only the default MPLS EXP
classifier is supported; the default MPLS EXP classifier
takes the EXP bits 1 and 2 as the output queue number.
Loss priorities
based on the
Frame Relay
discard eligible
(DE) bit
No
No
No
No
–
72
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
Table 6: CoS Features and Limitations on M Series and T Series Routers (continued)
Interface Hardware
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
Maximum
number per FPC
or PIC
2
16
32
32
–
Per queue
No
Yes
Yes
Yes
–
Per loss priority
Yes
Yes
Yes
Yes
–
Per
Transmission
Control Protocol
(TCP) bit
No
Yes
Yes
Yes
–
Adaptive
shaping for
Frame Relay
traffic
No
No
No
No
–
Traffic policing
Yes
Yes
Yes
Yes
–
Two-rate
tricolor marking
(TCM)
No
No
Yes
Yes
Allows you to configure up to four loss priorities.
Two-rate TCM is supported on T Series routers with
Enhanced II FPCs and the T640 Core Router with
Enhanced Scaling FPC4.
Virtual channels
No
No
No
No
–
Feature
Details
Drop Profiles
Policing
Queuing
Copyright © 2013, Juniper Networks, Inc.
73
PTX Series Packet Transport Switch Software Documentation
Table 6: CoS Features and Limitations on M Series and T Series Routers (continued)
Interface Hardware
Feature
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
Priority
Yes
No
Yes
Yes
Details
Gigabit Ethernet IQ2 PICs support only one queue in the
scheduler map with medium-high, high, or strict-high
priority. If more than one queue is configured with high or
strict-high priority, the one that appears first in the
configuration is implemented as strict-high priority. This
queue receives unlimited transmission bandwidth.
The remaining queues are implemented as low priority,
which means they might be starved.
On the IQE PIC, you can rate-limit the strict-high and high
queues. Without this limiting, traffic that requires low
latency (delay) such as voice can block the transmission
of medium-priority and low-priority packets. Unless
limited, high and strict-high traffic is always sent before
lower priority traffic.
Support for the medium-low and medium-high queuing
priority mappings varies by FPC type.
Per-queue
output statistics
No
Yes
Yes
Yes
Per-queue output statistics are shown in the output of the
show interfaces queue command.
Maximum
number per FPC
or PIC
No
maximum
No
maximum
64
64
On IQ2 and IQ2E PICs, the CoS classification and CoS
rewrite processes are off-loaded from the FPC to the PIC,
so the capabilities and limitations of these types of PICs
must be taken into consideration.
dscp
No
Yes
Yes
Yes
For M Series Enhanced FPCs, bits 0 through 5 are rewritten,
and bits 6 through 7 are preserved.
Rewrite Markers
For M320 and T Series router non-IQ FPCs, bits 0 through 5
are rewritten, and bits 6 through 7 are preserved.
For M320 and T Series router FPCs, you must decode the
loss priority using the firewall filter before you can use loss
priority to select the rewrite CoS value.
For M320 and T Series router FPCs, Adaptive Services PIC
link services IQ interfaces (lsq-) do not support DSCP
rewrite markers.
74
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
Table 6: CoS Features and Limitations on M Series and T Series Routers (continued)
Interface Hardware
Feature
FPCs in
M120
Routers
Enhanced
FPCs in
M120
Routers
FPCs in
M320 or
T Series
Routers
Type-4
or
Enhanced
Scaling
FPCs in
T Series
Routers
dscp-ipv6
No
Yes
Yes
Yes
Details
For M Series router Enhanced FPCs and M320 and T Series
router FPCs, bits 0 through 5 are rewritten, and bits 6
through 7 are preserved.
For M320 and T Series routers FPCs, you must decode the
loss priority using the firewall filter before you can use loss
priority to select the rewrite CoS value.
For M320 and T Series router FPCs, Adaptive Services PIC
link services IQ interfaces (lsq-) do not support DSCP
rewrite markers.
frame-relay-de
No
No
No
No
–
ieee-802.1
No
Yes
Yes
Yes
For M Series router enhanced FPCs and T Series router
FPCs, fixed rewrite loss priority determines the value for
bit 0; queue number (forwarding class) determines
bits 1 and 2. For IQ PICs, you can only configure one
IEEE 802.1 rewrite rule on a physical port. All logical ports
(units) on that physical port should apply the same
IEEE 802.1 rewrite rule.
inet-precedence
Yes
Yes
Yes
Yes
For M Series router FPCs, bits 0 through 2 are rewritten,
and bits 3 through 7 are preserved.
For M Series router Enhanced FPCs, bits 0 through 2 are
rewritten, bits 3 through 5 are cleared, and bits 6 through 7
are preserved.
For M320 and T Series routers FPCs, bits 0 through 2 are
rewritten and bits 3 through 7 are preserved.
For M320 and T Series router FPCs, you must decode the
loss priority using the firewall filter before you can use loss
priority to select the rewrite CoS value.
mpls-exp
Yes
Yes
Yes
Yes
For M320 and T Series router FPCs, you must decode the
loss priority using the firewall filter before you can use loss
priority to select the rewrite CoS value.
For M Series routers FPCs, fixed rewrite loss priority
determines the value for bit 0; queue number (forwarding
class) determines bits 1 and 2.
Copyright © 2013, Juniper Networks, Inc.
75
PTX Series Packet Transport Switch Software Documentation
CoS Hardware Capabilities and Limitations on PTX Series Packet Transport Switches
Table 7 on page 76 lists CoS hardware capabilities and limitations on PTX Series Packet
Transport Switches.
Table 7: CoS Hardware Capabilities and Limitations on PTX Series Packet Transport Switches
Feature
PTX Series
Comments
64
L2 classifiers (sum of ieee-802.1 +
ieee-802.1ad cannot exceed 32)
Classifiers
Maximum number per PFE
DSCP and inet-precedence classifiers (sum
of dscp + inet-precedence classifiers
cannot exceed 32)
dscp-ipv6 classifiers
exp classifiers
dscp
Yes
DSCP and IP precedence classifiers cannot
be configured on the same logical interface.
dscp-ipv6
Yes
Separate classifiers can be applied for IPv4
and IPv6 packets per logical interface.
ieee-802.1p
Yes
You can associate ieee-802.1p with any
other type of classifier on the same logical
interface. For L3 packets, an L3 classifier
takes precedence over an IEEE classifier.
inet-precedence
Yes
mpls-exp
Yes
Loss priorities based on the Frame Relay
discard eligible (DE) bit
No
76
Copyright © 2013, Juniper Networks, Inc.
Chapter 9: Class of Service
Table 7: CoS Hardware Capabilities and Limitations on PTX Series Packet Transport
Switches (continued)
Feature
PTX Series
Comments
Maximum number
32
You can configure up to 32 drop profiles in
the PTX chassis.
Per queue
Yes
Per loss priority
Yes
Per Transmission Control Protocol (TCP)
bit
No
Drop Profiles
Policing
Traffic policing
Yes
Two-rate tricolor marking (TCM)
Yes
Queuing
Priority
Yes (4)
Per-queue output statistics
Yes
Red-dropped counters are not maintained
per drop precedence. Also tail drop
counters always show zero because
packets are always dropped by the RED
algorithm.
Maximum number per PFE
64
The sum of L2 and L3 rewrite rules cannot
exceed 64.
dscp
Yes
dscp-ipv6
Yes
ieee-802.1
Yes
inet-precedence
No
mpls-exp
Yes
Rewrite Markers
Related
Documentation
L2 and L3 rewrites can be applied to the
same packet simultaneously.
•
Applying Classifiers to Logical Interfaces
•
Setting Packet Loss Priority
•
Platform Support for Priority Scheduling
•
CoS Capabilities and Limitations on IQ2 and IQ2E PICs (M Series and T Series Platforms)
Copyright © 2013, Juniper Networks, Inc.
77
PTX Series Packet Transport Switch Software Documentation
•
78
CoS Capabilities and Limitations on MPCs and MICs
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 10
Firewall Filters
•
Standard Firewall Filter Match Conditions for IPv4 Traffic on page 79
•
Standard Firewall Filter Match Conditions for IPv6 Traffic on page 88
•
Standard Firewall Filter Match Conditions for MPLS Traffic on page 95
•
Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic on page 96
•
Standard Firewall Filter Terminating Actions on page 99
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Match Conditions for IPv4 Traffic
You can configure a standard stateless firewall filter with match conditions for Internet
Protocol version 4 (IPv4) traffic (family inet). Table 8 on page 79 describes the
match-conditions you can configure at the [edit firewall family inet filter filter-name term
term-name from] hierarchy level.
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic
Match Condition
Description
address address [ except ]
Match the IPv4 source or destination address field unless the except option is included. If the
option is included, do not match the IPv4 source or destination address field.
ah-spi spi-value
(M Series routers, except M120 and M320) Match the IPsec authentication header (AH) security
parameter index (SPI) value.
NOTE: This match condition is not supported on PTX series packet transport switches.
ah-spi-except spi-value
(M Series routers, except M120 and M320) Do not match the IPsec AH SPI value.
NOTE: This match condition is not supported on PTX series packet transport switches.
apply-groups
Specify which groups to inherit configuration data from. You can specify more than one group
name. You must list them in order of inheritance priority. The configuration data in the first group
takes priority over the data in subsequent groups.
apply-groups-except
Specify which groups not to inherit configuration data from. You can specify more than one group
name.
Copyright © 2013, Juniper Networks, Inc.
79
PTX Series Packet Transport Switch Software Documentation
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
destination-address address
[ except ]
Match the IPv4 destination address field unless the except option is included. If the option is
included, do not match the IPv4 destination address field..
You cannot specify both the address and destination-address match conditions in the same term.
destination-class
class-names
Match one or more specified destination class names (sets of destination prefixes grouped
together and given a class name). For more information, see Firewall Filter Match Conditions
Based on Address Classes.
NOTE: This match condition is not supported on PTX series packet transport switches.
destination-class-except
class-names
Do not match one or more specified destination class names. For details, see the destination-class
match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
destination-port number
Match the UDP or TCP destination port field.
You cannot specify both the port and destination-port match conditions in the same term.
If you configure this match condition, we recommend that you also configure the protocol udp or
protocol tcp match statement in the same term to specify which protocol is being used on the
port.
In place of the numeric value, you can specify one of the following text synonyms (the port
numbers are also listed): afs (1483), bgp (179), biff (512), bootpc (68), bootps (67), cmd (514),
cvspserver (2401), dhcp (67), domain (53), eklogin (2105), ekshell (2106), exec (512), finger (79),
ftp (21), ftp-data (20), http (80), https (443), ident (113), imap (143), kerberos-sec (88),
klogin (543), kpasswd (761), krb-prop (754), krbupdate (760), kshell (544), ldap (389), ldp (646),
login (513), mobileip-agent (434), mobilip-mn (435), msdp (639), netbios-dgm (138),
netbios-ns (137), netbios-ssn (139), nfsd (2049), nntp (119), ntalk (518), ntp (123), pop3 (110),
pptp (1723), printer (515), radacct (1813), radius (1812), rip (520), rkinit (2108), smtp (25),
snmp (161), snmptrap (162), snpp (444), socks (1080), ssh (22), sunrpc (111), syslog (514),
tacacs (49), tacacs-ds (65), talk (517), telnet (23), tftp (69), timed (525), who (513), or xdmcp (177).
destination-port-except
number
Do not match the UDP or TCP destination port field. For details, see the destination-port match
condition.
destination-prefix-list name
[ except ]
Match destination prefixes in the specified list unless the except option is included. If the option
is included, do not match the destination prefixes in the specified list.
Specify the name of a prefix list defined at the [edit policy-options prefix-list prefix-list-name]
hierarchy level.
80
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
dscp number
Match the Differentiated Services code point (DSCP). The DiffServ protocol uses the
type-of-service (ToS) byte in the IP header. The most significant 6 bits of this byte form the
DSCP. For more information, see the Junos OS Class of Service Configuration Guide.
You can specify a numeric value from 0 through 63. To specify the value in hexadecimal form,
include 0x as a prefix. To specify the value in binary form, include b as a prefix.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed):
•
RFC 3246, An Expedited Forwarding PHB (Per-Hop Behavior), defines one code point: ef (46).
•
RFC 2597, Assured Forwarding PHB Group, defines 4 classes, with 3 drop precedences in each
class, for a total of 12 code points:
•
af11 (10), af12 (12), af13 (14)
•
af21 (18), af22 (20), af23 (22)
•
af31 (26), af32 (28), af33 (30)
•
af41 (34), af42 (36), af43 (38)
dscp-except number
Do not match on the DSCP number. For more information, see the dscp match condition.
esp-spi spi-value
Match the IPsec encapsulating security payload (ESP) SPI value. Match on this specific SPI value.
You can specify the ESP SPI value in hexadecimal, binary, or decimal form.
NOTE: This match condition is not supported on PTX series packet transport switches.
esp-spi-except spi-value
Match the IPsec ESP SPI value. Do not match on this specific SPI value.
NOTE: This match condition is not supported on PTX series packet transport switches.
first-fragment
Match if the packet is the first fragment of a fragmented packet. Do not match if the packet is a
trailing fragment of a fragmented packet. The first fragment of a fragmented packet has a
fragment offset value of 0.
This match condition is an alias for the bit-field match condition fragment-offset 0 match condition.
To match both first and trailing fragments, you can use two terms that specify different match
conditions: first-fragment and is-fragment.
forwarding-class class
Match the forwarding class of the packet.
Specify assured-forwarding, best-effort, expedited-forwarding, or network-control.
For information about forwarding classes and router-internal output queues, see the Junos OS
Class of Service Configuration Guide.
forwarding-class-except
class
Do not match the forwarding class of the packet. For details, see the forwarding-class match
condition.
fragment-flags number
(Ingress only) Match the three-bit IP fragmentation flags field in the IP header.
In place of the numeric field value, you can specify one of the following keywords (the field values
are also listed): dont-fragment (0x4), more-fragments (0x2), or reserved (0x8).
Copyright © 2013, Juniper Networks, Inc.
81
PTX Series Packet Transport Switch Software Documentation
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
fragment-offset value
Match the 13-bit fragment offset field in the IP header. The value is the offset, in 8-byte units, in
the overall datagram message to the data fragment. Specify a numeric value, a range of values,
or a set of values. An offset value of 0 indicates the first fragment of a fragmented packet.
The first-fragment match condition is an alias for the fragment-offset 0 match condition.
To match both first and trailing fragments, you can use two terms that specify different match
conditions (first-fragment and is-fragment).
fragment-offset-except
number
Do not match the 13-bit fragment offset field.
icmp-code number
Match the ICMP message code field.
If you configure this match condition, we recommend that you also configure the protocol icmp
match condition in the same term.
If you configure this match condition, you must also configure the icmp-type message-type match
condition in the same term. An ICMP message code provides more specific information than an
ICMP message type, but the meaning of an ICMP message code is dependent on the associated
ICMP message type.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed). The keywords are grouped by the ICMP type with which they are associated:
•
parameter-problem: ip-header-bad (0), required-option-missing (1)
•
redirect: redirect-for-host (1), redirect-for-network (0), redirect-for-tos-and-host (3),
redirect-for-tos-and-net (2)
•
time-exceeded: ttl-eq-zero-during-reassembly (1), ttl-eq-zero-during-transit (0)
•
unreachable: communication-prohibited-by-filtering (13), destination-host-prohibited (10),
destination-host-unknown (7), destination-network-prohibited (9),
destination-network-unknown (6), fragmentation-needed (4), host-precedence-violation (14),
host-unreachable (1), host-unreachable-for-TOS (12), network-unreachable (0),
network-unreachable-for-TOS (11), port-unreachable (3), precedence-cutoff-in-effect (15),
protocol-unreachable (2), source-host-isolated (8), source-route-failed (5)
icmp-code-except
message-code
Do not match the ICMP message code field. For details, see the icmp-code match condition.
icmp-type number
Match the ICMP message type field.
If you configure this match condition, we recommend that you also configure the protocol icmp
match condition in the same term.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed): echo-reply (0), echo-request (8), info-reply (16), info-request (15),
mask-request (17), mask-reply (18), parameter-problem (12), redirect (5), router-advertisement (9),
router-solicit (10), source-quench (4), time-exceeded (11), timestamp (13), timestamp-reply (14),
or unreachable (3).
icmp-type-except
message-type
82
Do not match the ICMP message type field. For details, see the icmp-type match condition.
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
interface interface-name
Match the interface on which the packet was received.
NOTE: If you configure this match condition with an interface that does not exist, the term
does not match any packet.
interface-group
group-number
Match the logical interface on which the packet was received to the specified interface group or
set of interface groups. For group-number, specify a single value or a range of values from 0 through
255.
To assign a logical interface to an interface group group-number, specify the group-number at the
[interfaces interface-name unit number family family filter group] hierarchy level.
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Filtering Packets Received on a Set of Interface Groups Overview.
interface-group-except
group-number
Do not match the logical interface on which the packet was received to the specified interface
group or set of interface groups. For details, see the interface-group match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
interface-set
interface-set-name
Match the interface on which the packet was received to the specified interface set.
To define an interface set, include the interface-set statement at the [edit firewall] hierarchy level.
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Filtering Packets Received on an Interface Set Overview.
Copyright © 2013, Juniper Networks, Inc.
83
PTX Series Packet Transport Switch Software Documentation
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
ip-options values
Match the 8-bit IP option field, if present, to the specified value or list of values.
In place of a numeric value, you can specify one of the following text synonyms (the option values
are also listed): loose-source-route (131), record-route (7), router-alert (148), security (130),
stream-id (136),strict-source-route (137), or timestamp (68).
To match any value for the IP option, use the text synonym any. To match on multiple values,
specify the list of values within square brackets ('[’ and ']’). To match a range of values, use the
value specification [ value1-value2 ].
For example, the match condition ip-options [ 0-147 ] matches on an IP options field that contains
the loose-source-route, record-route, or security values, or any other value from 0 through 147.
However, this match condition does not match on an IP options field that contains only the
router-alert value (148).
For most interfaces, a filter term that specifies an ip-option match on one or more specific IP option
values (a value other than any) causes packets to be sent to the Routing Engine so that the kernel
can parse the IP option field in the packet header.
•
For a firewall filter term that specifies an ip-option match on one or more specific IP option
values, you cannot specify the count, log, or syslog nonterminating actions unless you also
specify the discard terminating action in the same term. This behavior prevents double-counting
of packets for a filter applied to a transit interface on the router or switch.
•
Packets processed on the kernel might be dropped in case of a system bottleneck. To ensure
that matched packets are instead sent to the Packet Forwarding Engine (where packet
processing is implemented in hardware), use the ip-options any match condition.
The 10-Gigabit Ethernet Modular Port Concentrator (MPC), 100-Gigabit Ethernet MPC, 60-Gigabit
Ethernet MPC, 60-Gigabit Queuing Ethernet MPC, and 60-Gigabit Ethernet Enhanced Queuing
MPC on MX Series routers (and EX Series switches) are capable of parsing the IP option field of
the IPv4 packet header. For interfaces configured on those MPCs, all packets that are matched
using the ip-options match condition are sent to the Packet Forwarding Engine for processing.
NOTE: On M and T series routers, firewall filters cannot count ip-options packets on a per option
type and per interface basis. A limited work around is to use the show pfe statistics ip options
command to see ip-options statistics on a per PFE basis. See show pfe statistics ip for sample
output.
ip-options-except values
Do not match the IP option field to the specified value or list of values. For details about specifying
the values, see the ip-options match condition.
is-fragment
Match if the packet is a trailing fragment of a fragmented packet. Do not match the first fragment
of a fragmented packet.
NOTE: To match both first and trailing fragments, you can use two terms that specify different
match conditions (first-fragment and is-fragment).
84
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
loss-priority level
Match the packet loss priority (PLP) level.
Specify a single level or multiple levels: low, medium-low, medium-high, or high.
Supported on M120 and M320 routers; M7i and M10i routers with the Enhanced CFEB (CFEB-E);
and MX Series routers.
For IP traffic on M320, MX Series and T Series routers with Enhanced II Flexible PIC Concentrators
(FPCs) and EX Series switches, you must include the tri-color statement at the [edit
class-of-service] hierarchy level to commit a PLP configuration with any of the four levels specified.
If the tri-color statement is not enabled, you can only configure the high and low levels. This
applies to all protocol families.
NOTE: This match condition is not supported on PTX series packet transport switches.
For information about the tri-color statement and for information about using behavior aggregate
(BA) classifiers to set the PLP level of incoming packets, see the Junos OS Class of Service
Configuration Guide.
loss-priority-except level
Do not match the PLP level. For details, see the loss-priority match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
packet-length bytes
Match the length of the received packet, in bytes. The length refers only to the IP packet, including
the packet header, and does not include any Layer 2 encapsulation overhead.
packet-length-except bytes
Do not match the length of the received packet, in bytes. For details, see the packet-length match
type.
port number
Match the UDP or TCP source or destination port field.
If you configure this match condition, you cannot configure the destination-port match condition
or the source-port match condition in the same term.
If you configure this match condition, we recommend that you also configure the protocol udp or
protocol tcp match statement in the same term to specify which protocol is being used on the
port.
In place of the numeric value, you can specify one of the text synonyms listed under
destination-port.
port-except number
Do not match the UDP or TCP source or destination port field. For details, see the port match
condition.
precedence
ip-precedence-value
Match the IP precedence field.
In place of the numeric field value, you can specify one of the following text synonyms (the field
values are also listed): critical-ecp (0xa0), flash (0x60), flash-override (0x80), immediate (0x40),
internet-control (0xc0), net-control (0xe0), priority (0x20), or routine (0x00). You can specify
precedence in hexadecimal, binary, or decimal form.
Copyright © 2013, Juniper Networks, Inc.
85
PTX Series Packet Transport Switch Software Documentation
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
precedence-exceptip-precedence-value
Do not match the IP precedence field.
In place of the numeric field value, you can specify one of the following text synonyms (the field
values are also listed): critical-ecp (0xa0), flash (0x60), flash-override (0x80), immediate (0x40),
internet-control (0xc0), net-control (0xe0), priority (0x20), or routine (0x00). You can specify
precedence in hexadecimal, binary, or decimal form.
prefix-list name
Match the prefixes of the source or destination address fields to the prefixes in the specified list
unless the except option is included. If the option is included, do not match the prefixes of the
source or destination address fields to the prefixes in the specified list.
The prefix list is defined at the [edit policy-options prefix-list prefix-list-name] hierarchy level.
protocol number
Match the IP protocol type field. In place of the numeric value, you can specify one of the following
text synonyms (the field values are also listed): ah (51), dstopts (60), egp (8), esp (50),
fragment (44), gre (47), hop-by-hop (0), icmp (1), icmp6 (58), icmpv6 (58), igmp (2), ipip (4),
ipv6 (41), ospf (89), pim (103), rsvp (46), sctp (132), tcp (6), udp (17), or vrrp (112).
protocol-except number
Do not match the IP protocol type field. In place of the numeric value, you can specify one of the
following text synonyms (the field values are also listed): ah (51), dstopts (60), egp (8), esp (50),
fragment (44), gre (47), hop-by-hop (0), icmp (1), icmp6 (58), icmpv6 (58), igmp (2), ipip (4),
ipv6 (41), ospf (89), pim (103), rsvp (46), sctp (132), tcp (6), udp (17), or vrrp (112).
rat-type tech-type-value
Match the radio-access technology (RAT) type specified in the 8-bit Tech-Type field of Proxy
Mobile IPv4 (PMIPv4) access technology type extension. The technology type specifies the
access technology through which the mobile device is connected to the access network.
Specify a single value, a range of values, or a set of values. You can specify a technology type as
a numeric value from 0 through 255 or as a system keyword.
•
The following numeric values are examples of well-known technology types:
•
Numeric value 1 matches IEEE 802.3.
•
Numeric value 2 matches IEEE 802.11a/b/g.
•
Numeric value 3 matches IEEE 802.16e
•
Numeric value 4 matches IEEE 802.16m.
•
Text string eutran matches 4G.
•
Text string geran matches 2G.
•
Text string utran matches 3G.
rat-type-except
tech-type-value
Do not match the RAT Type.
service-filter-hit
Match a packet received from a filter where a service-filter-hit action was applied.
NOTE: This match condition is not supported on PTX series packet transport switches.
source-address address
[ except ]
Match the IPv4 address of the source node sending the packet unless the except option is included.
If the option is included, do not match the IPv4 address of the source node sending the packet.
You cannot specify both the address and source-address match conditions in the same term.
86
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
source-class class-names
Match one or more specified source class names (sets of source prefixes grouped together and
given a class name). For more information, see Firewall Filter Match Conditions Based on Address
Classes.
NOTE: This match condition is not supported on PTX series packet transport switches.
source-class-except
class-names
Do not match one or more specified source class names. For details, see the source-class match
condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
source-port number
Match the UDP or TCP source port field.
You cannot specify the port and source-port match conditions in the same term.
If you configure this match condition for IPv4 traffic, we recommend that you also configure the
protocol udp or protocol tcp match statement in the same term to specify which protocol is being
used on the port.
In place of the numeric value, you can specify one of the text synonyms listed with the
destination-port number match condition.
source-port-except number
Do not match the UDP or TCP source port field. For details, see the source-port match condition.
source-prefix-list name
[ except ]
Match source prefixes in the specified list unless the except option is included. If the option is
included, do not match the source prefixes in the specified list.
Specify the name of a prefix list defined at the [edit policy-options prefix-list prefix-list-name]
hierarchy level.
tcp-established
Match TCP packets of an established TCP session (packets other than the first packet of a
connection). This is an alias for tcp-flags "(ack | rst)".
This match condition does not implicitly check that the protocol is TCP. To check this, specify
the protocol tcp match condition.
Copyright © 2013, Juniper Networks, Inc.
87
PTX Series Packet Transport Switch Software Documentation
Table 8: Standard Firewall Filter Match Conditions for IPv4 Traffic (continued)
Match Condition
Description
tcp-flags value
Match one or more of the low-order 6 bits in the 8-bit TCP flags field in the TCP header.
To specify individual bit fields, you can specify the following text synonyms or hexadecimal values:
•
fin (0x01)
•
syn (0x02)
•
rst (0x04)
•
push (0x08)
•
ack (0x10)
•
urgent (0x20)
In a TCP session, the SYN flag is set only in the initial packet sent, while the ACK flag is set in all
packets sent after the initial packet.
You can string together multiple flags using the bit-field logical operators.
For combined bit-field match conditions, see the tcp-established and tcp-initial match conditions.
If you configure this match condition, we recommend that you also configure the protocol tcp
match statement in the same term to specify that the TCP protocol is being used on the port.
For IPv4 traffic only, this match condition does not implicitly check whether the datagram contains
the first fragment of a fragmented packet. To check for this condition for IPv4 traffic only, use
the first-fragment match condition.
Match the initial packet of a TCP connection. This is an alias for tcp-flags "(!ack & syn)".
tcp-initial
This condition does not implicitly check that the protocol is TCP. If you configure this match
condition, we recommend that you also configure the protocol tcp match condition in the same
term.
ttl number
Match the IPv4 time-to-live number. Specify a TTL value or a range of TTL values. For number,
you can specify one or more values from 0 through 255. This match condition is supported only
on M120, M320, MX Series, and T Series routers.
ttl-except number
Do not match on the IPv4 TTL number. For details, see the ttl match condition.
Related
Documentation
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Terminating Actions on page 99
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Match Conditions for IPv6 Traffic
You can configure a standard stateless firewall filter with match conditions for Internet
Protocol version 6 (IPv6) traffic (family inet6). Table 9 on page 89 describes the
match-conditions you can configure at the [edit firewall family inet6 filter filter-name term
term-name from] hierarchy level.
88
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic
Match Condition
Description
address address [ except ]
Match the IPv6 source or destination address field unless the except option is included. If the
option is included, do not match the IPv6 source or destination address field.
apply-groups
Specify which groups to inherit configuration data from. You can specify more than one group
name. You must list them in order of inheritance priority. The configuration data in the first group
takes priority over the data in subsequent groups.
apply-groups-except
Specify which groups not to inherit configuration data from. You can specify more than one group
name.
destination-address address
[ except ]
Match the IPv6 destination address field unless the except option is included. If the option is
included, do not match the IPv6 destination address field.
You cannot specify both the address and destination-address match conditions in the same term.
destination-class
class-names
Match one or more specified destination class names (sets of destination prefixes grouped
together and given a class name).
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Firewall Filter Match Conditions Based on Address Classes.
destination-class-except
class-names
Do not match one or more specified destination class names. For details, see the destination-class
match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
destination-port number
Match the UDP or TCP destination port field.
You cannot specify both the port and destination-port match conditions in the same term.
If you configure this match condition, we recommend that you also configure the next-header
udp or next-header tcp match condition in the same term to specify which protocol is being used
on the port.
In place of the numeric value, you can specify one of the following text synonyms (the port
numbers are also listed): afs (1483), bgp (179), biff (512), bootpc (68), bootps (67), cmd (514),
cvspserver (2401), dhcp (67), domain (53), eklogin (2105), ekshell (2106), exec (512), finger (79),
ftp (21), ftp-data (20), http (80), https (443), ident (113), imap (143), kerberos-sec (88),
klogin (543), kpasswd (761), krb-prop (754), krbupdate (760), kshell (544), ldap (389), ldp (646),
login (513), mobileip-agent (434), mobilip-mn (435), msdp (639), netbios-dgm (138),
netbios-ns (137), netbios-ssn (139), nfsd (2049), nntp (119), ntalk (518), ntp (123), pop3 (110),
pptp (1723), printer (515), radacct (1813), radius (1812), rip (520), rkinit (2108), smtp (25),
snmp (161), snmptrap (162), snpp (444), socks (1080), ssh (22), sunrpc (111), syslog (514),
tacacs (49), tacacs-ds (65), talk (517), telnet (23), tftp (69), timed (525), who (513), or xdmcp (177).
destination-port-except
number
Do not match the UDP or TCP destination port field. For details, see the destination-port match
condition.
destination-prefix-list
prefix-list-name [ except ]
Match the IPv6 destination prefix to the specified list unless the except option is included. If the
option is included, do not match the IPv6 destination prefix to the specified list.
The prefix list is defined at the [edit policy-options prefix-list prefix-list-name] hierarchy level.
Copyright © 2013, Juniper Networks, Inc.
89
PTX Series Packet Transport Switch Software Documentation
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic (continued)
Match Condition
Description
forwarding-class class
Match the forwarding class of the packet.
Specify assured-forwarding, best-effort, expedited-forwarding, or network-control.
For information about forwarding classes and router-internal output queues, see the Junos OS
Class of Service Configuration Guide.
forwarding-class-except
class
Do not match the forwarding class of the packet. For details, see the forwarding-class match
condition.
hop-limit hop-limit
Match the hop limit to the specified hop limit or set of hop limits. For hop-limit, specify a single
value or a range of values from 0 through 255..
hop-limit-except
message-code
Do not match the hop limit to the specified hop limit or set of hop limits. For details, see the
hop-limit match condition.
icmp-code message-code
Match the ICMP message code field.
If you configure this match condition, we recommend that you also configure the next-header
icmp or next-header icmp6 match condition in the same term.
If you configure this match condition, you must also configure the icmp-type message-type match
condition in the same term. An ICMP message code provides more specific information than an
ICMP message type, but the meaning of an ICMP message code is dependent on the associated
ICMP message type.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed). The keywords are grouped by the ICMP type with which they are associated:
•
parameter-problem: ip6-header-bad (0), unrecognized-next-header (1), unrecognized-option
(2)
•
time-exceeded: ttl-eq-zero-during-reassembly (1), ttl-eq-zero-during-transit (0)
•
destination-unreachable: administratively-prohibited (1), address-unreachable (3),
no-route-to-destination (0), port-unreachable (4)
icmp-code-except
message-code
Do not match the ICMP message code field. For details, see the icmp-code match condition.
icmp-type message-type
Match the ICMP message type field.
If you configure this match condition, we recommend that you also configure the next-header
icmp or next-header icmp6 match condition in the same term.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed): destination-unreachable (1), echo-reply (129), echo-request (128),
membership-query (130), membership-report (131), membership-termination (132),
neighbor-advertisement (136), neighbor-solicit (135), node-information-reply (140),
node-information-request (139), packet-too-big (2), parameter-problem (4), redirect (137),
router-advertisement (134), router-renumbering (138), router-solicit (133), or time-exceeded (3).
icmp-type-except
message-type
90
Do not match the ICMP message type field. For details, see the icmp-type match condition.
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic (continued)
Match Condition
Description
interface interface-name
Match the interface on which the packet was received.
NOTE: If you configure this match condition with an interface that does not exist, the term
does not match any packet.
interface-group
group-number
Match the logical interface on which the packet was received to the specified interface group or
set of interface groups. For group-number, specify a single value or a range of values from 0 through
255.
To assign a logical interface to an interface group group-number, specify the group-number at the
[interfaces interface-name unit number family family filter group] hierarchy level.
For more information, see Filtering Packets Received on a Set of Interface Groups Overview.
interface-group-except
group-number
Do not match the logical interface on which the packet was received to the specified interface
group or set of interface groups. For details, see the interface-group match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
interface-set
interface-set-name
Match the interface on which the packet was received to the specified interface set.
To define an interface set, include the interface-set statement at the [edit firewall] hierarchy level.
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Filtering Packets Received on an Interface Set Overview.
loss-priority level
Match the packet loss priority (PLP) level.
Specify a single level or multiple levels: low, medium-low, medium-high, or high.
Supported on M120 and M320 routers; M7i and M10i routers with the Enhanced CFEB (CFEB-E);
and MX Series routers and EX Series switches.
For IP traffic on M320, MX Series, T Series routers and EX Series switches with Enhanced II Flexible
PIC Concentrators (FPCs), you must include the tri-color statement at the [edit class-of-service]
hierarchy level to commit a PLP configuration with any of the four levels specified. If the tri-color
statement is not enabled, you can only configure the high and low levels. This applies to all
protocol families.
NOTE: This match condition is not supported on PTX series packet transport switches.
For information about the tri-color statement and for information about using behavior aggregate
(BA) classifiers to set the PLP level of incoming packets, see the Junos OS Class of Service
Configuration Guide.
loss-priority-except level
Do not match the PLP level. For details, see the loss-priority match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
Copyright © 2013, Juniper Networks, Inc.
91
PTX Series Packet Transport Switch Software Documentation
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic (continued)
Match Condition
Description
next-header header-type
Match the 8-bit Next Header field that identifies the type of header between the IPv6 header
and payload.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed): ah (51), dstops (60), egp (8), esp (50), fragment (44), gre (47), hop-by-hop (0),
icmp (1), icmp6 (58), icmpv6 (58), igmp (2), ipip (4), ipv6 (41), no-next-header (59), ospf (89),
pim (103), routing (43), rsvp (46), sctp (132), tcp (6), udp (17), or vrrp (112).
NOTE: next-header icmp6 and next-header icmpv6 match conditions perform the same function.
next-header icmp6 is the preferred option. next-header icmpv6 is hidden in the Junos OS CLI.
next-header-except
header-type
Do not match the 8-bit Next Header field that identifies the type of header between the IPv6
header and payload. For details, see the next-header match type.
packet-length bytes
Match the length of the received packet, in bytes. The length refers only to the IP packet, including
the packet header, and does not include any Layer 2 encapsulation overhead.
packet-length-except bytes
Do not match the length of the received packet, in bytes. For details, see the packet-length match
type.
payload-protocol
protocol-type
Match the payload protocol type.
In place of the protocol-type numeric value, you can specify one of the following text synonyms
(the field values are also listed): specify one or a set of of the following: ah (51), dstopts (60),
egp (8), esp (50), fragment (44), gre (47), hop-by-hop (0), icmp (1), icmp6 (58, igmp (2), ipip (4),
ipv6 (41), no-next-header, ospf (89), pim (103), routing, rsvp (46), sctp (132), tcp (6), udp (17), or
vrrp (112).
payload-protocol-except
protocol-type
Do not match the payload protocol type. For details, see the payload-protocol match type.
port number
Match the UDP or TCP source or destination port field.
If you configure this match condition, you cannot configure the destination-port match condition
or the source-port match condition in the same term.
If you configure this match condition, we recommend that you also configure the next-header
udp or next-header tcp match condition in the same term to specify which protocol is being used
on the port.
In place of the numeric value, you can specify one of the text synonyms listed under
destination-port.
port-except number
Do not match the UDP or TCP source or destination port field. For details, see the port match
condition.
prefix-list prefix-list-name
[ except ]
Match the prefixes of the source or destination address fields to the prefixes in the specified list
unless the except option is included. If the option is included, do not match the prefixes of the
source or destination address fields to the prefixes in the specified list.
The prefix list is defined at the [edit policy-options prefix-list prefix-list-name] hierarchy level.
92
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic (continued)
Match Condition
Description
service-filter-hit
Match a packet received from a filter where a service-filter-hit action was applied.
NOTE: This match condition is not supported on PTX series packet transport switches.
source-address address
[ except ]
Match the IPv6 address of the source node sending the packet unless the except option is included.
If the option is included, do not match the IPv6 address of the source node sending the packet.
You cannot specify both the address and source-address match conditions in the same term.
source-class class-names
Match one or more specified source class names (sets of source prefixes grouped together and
given a class name).
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Firewall Filter Match Conditions Based on Address Classes.
source-class-except
class-names
Do not match one or more specified source class names. For details, see the source-class match
condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
source-port number
Match the UDP or TCP source port field.
You cannot specify the port and source-port match conditions in the same term.
If you configure this match condition, we recommend that you also configure the next-header
udp or next-header tcp match condition in the same term to specify which protocol is being used
on the port.
In place of the numeric value, you can specify one of the text synonyms listed with the
destination-port number match condition.
source-port-except number
Do not match the UDP or TCP source port field. For details, see the source-port match condition.
source-prefix-list name
[ except ]
Match the IPv6 address prefix of the packet source field unless the except option is included. If
the option is included, do not match the IPv6 address prefix of the packet source field.
Specify a prefix list name defined at the [edit policy-options prefix-list prefix-list-name] hierarchy
level.
tcp-established
Match TCP packets other than the first packet of a connection. This is a text synonym for tcp-flags
"(ack | rst)" (0x14).
NOTE: This condition does not implicitly check that the protocol is TCP. To check this, specify
the protocol tcp match condition.
If you configure this match condition, we recommend that you also configure the next-header tcp
match condition in the same term.
Copyright © 2013, Juniper Networks, Inc.
93
PTX Series Packet Transport Switch Software Documentation
Table 9: Standard Firewall Filter Match Conditions for IPv6 Traffic (continued)
Match Condition
Description
tcp-flags flags
Match one or more of the low-order 6 bits in the 8-bit TCP flags field in the TCP header.
To specify individual bit fields, you can specify the following text synonyms or hexadecimal values:
•
fin (0x01)
•
syn (0x02)
•
rst (0x04)
•
push (0x08)
•
ack (0x10)
•
urgent (0x20)
In a TCP session, the SYN flag is set only in the initial packet sent, while the ACK flag is set in all
packets sent after the initial packet.
You can string together multiple flags using the bit-field logical operators.
For combined bit-field match conditions, see the tcp-established and tcp-initial match conditions.
If you configure this match condition, we recommend that you also configure the next-header tcp
match condition in the same term to specify that the TCP protocol is being used on the port.
tcp-initial
Match the initial packet of a TCP connection. This is a text synonym for tcp-flags "(!ack & syn)".
This condition does not implicitly check that the protocol is TCP. If you configure this match
condition, we recommend that you also configure the next-header tcp match condition in the
same term.
traffic-class number
Match the 8-bit field that specifies the class-of-service (CoS) priority of the packet.
This field was previously used as the type-of-service (ToS) field in IPv4.
You can specify a numeric value from 0 through 63. To specify the value in hexadecimal form,
include 0x as a prefix. To specify the value in binary form, include b as a prefix.
In place of the numeric value, you can specify one of the following text synonyms (the field values
are also listed):
traffic-class-except number
94
•
RFC 3246, An Expedited Forwarding PHB (Per-Hop Behavior), defines one code point: ef (46).
•
RFC 2597, Assured Forwarding PHB Group, defines 4 classes, with 3 drop precedences in each
class, for a total of 12 code points:
•
af11 (10), af12 (12), af13 (14)
•
af21 (18), af22 (20), af23 (22)
•
af31 (26), af32 (28), af33 (30)
•
af41 (34), af42 (36), af43 (38)
Do not match the 8-bit field that specifies the CoS priority of the packet. For details, see the
traffic-class match description.
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
NOTE: If you specify an IPv6 address in a match condition (the address,
destination-address, or source-address match conditions), use the syntax for
text representations described in RFC 2373, IP Version 6 Addressing
Architecture. For more information about IPv6 addresses, see “IPv6 Overview”
and “IPv6 Standards” in the Junos OS Routing Protocols Configuration Guide.
Related
Documentation
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Terminating Actions on page 99
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Match Conditions for MPLS Traffic
You can configure a standard stateless firewall filter with match conditions for MPLS
traffic (family mpls).
NOTE: The input-list filter-names and output-list filter-names statements for
firewall filters for the mpls protocol family are supported on all interfaces
with the exception of management interfaces and internal Ethernet interfaces
(fxp or em0), loopback interfaces (lo0), and USB modem interfaces (umd).
Table 10 on page 95 describes the match-conditions you can configure at the [edit firewall
family mpls filter filter-name term term-name from] hierarchy level.
Table 10: Standard Firewall Filter Match Conditions for MPLS Traffic
Match Condition
Description
apply-groups
Specify which groups to inherit configuration data from. You can specify more than one group
name. You must list them in order of inheritance priority. The configuration data in the first group
takes priority over the data in subsequent groups.
apply-groups-except
Specify which groups not to inherit configuration data from. You can specify more than one group
name.
exp number
Experimental (EXP) bit number or range of bit numbers in the MPLS header. For number, you can
specify one or more values from 0 through 7 in decimal, binary, or hexadecimal format.
NOTE: This match condition is not supported on PTX series packet transport switches.
exp-except number
Do not match on the EXP bit number or range of bit numbers in the MPLS header. For number,
you can specify one or more values from 0 through 7.
NOTE: This match condition is not supported on PTX series packet transport switches.
forwarding-class class
Forwarding class. Specify assured-forwarding, best-effort, expedited-forwarding, or network-control.
forwarding-class-except
class
Do not match on the forwarding class. Specify assured-forwarding, best-effort,
expedited-forwarding, or network-control.
Copyright © 2013, Juniper Networks, Inc.
95
PTX Series Packet Transport Switch Software Documentation
Table 10: Standard Firewall Filter Match Conditions for MPLS Traffic (continued)
Match Condition
Description
interface interface-name
Interface on which the packet was received. You can configure a match condition that matches
packets based on the interface on which they were received.
NOTE: If you configure this match condition with an interface that does not exist, the term
does not match any packet.
Match the interface on which the packet was received to the specified interface set.
interface-set
interface-set-name
To define an interface set, include the interface-set statement at the [edit firewall] hierarchy level.
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Filtering Packets Received on an Interface Set Overview.
(Interfaces on Enhanced Scaling flexible PIC concentrators [FPCs] on supported T Series routers
only) Inner IP version. To match MPLS-tagged IPv4 packets, match on the text synonym ipv4.
ip-version number
NOTE: This match condition is not supported on PTX series packet transport switches.
Match the packet loss priority (PLP) level.
loss-priority level
Specify a single level or multiple levels: low, medium-low, medium-high, or high.
Supported on M120 and M320 routers; M7i and M10i routers with the Enhanced CFEB (CFEB-E);
and MX Series routers and EX Series switches.
For IP traffic on M320, MX Series, T Series routers with Enhanced II Flexible PIC Concentrators
(FPCs) and EX Series switches, you must include the tri-color statement at the [edit
class-of-service] hierarchy level to commit a PLP configuration with any of the four levels specified.
If the tri-color statement is not enabled, you can only configure the high and low levels. This
applies to all protocol families.
For information about the tri-color statement and for information about using behavior aggregate
(BA) classifiers to set the PLP level of incoming packets, see the Junos OS Class of Service
Configuration Guide.
Do not match the PLP level. For details, see the loss-priority match condition.
loss-priority-except level
NOTE: This match condition is not supported on PTX series packet transport switches.
Related
Documentation
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Terminating Actions on page 99
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic
You can configure a standard stateless firewall filter with match conditions for Layer 2
circuit cross-connect (CCC) traffic (family ccc).
96
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
The following restrictions apply to firewall filters for Layer 2 CCC traffic:
•
The input-list filter-names and output-list filter-names statements for firewall filters for
the ccc protocol family are supported on all interfaces with the exception of
management interfaces and internal Ethernet interfaces (fxp or em0), loopback
interfaces (lo0), and USB modem interfaces (umd).
•
Only on MX Series routers and EX Series switches, you cannot apply a Layer 2 CCC
stateless firewall filter (a firewall filter configured at the [edit firewall filter family ccc]
hierarchy level) as an output filter. On MX Series routers and EX Series switches, firewall
filters configured for the family ccc statement can be applied only as input filters.
Table 11 on page 97 describes the match-conditions you can configure at the [edit firewall
family ccc filter filter-name term term-name from] hierarchy level.
Table 11: Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic
Match Condition
Description
apply-groups
Specify which groups to inherit configuration data from. You can specify more than one group
name. You must list them in order of inheritance priority. The configuration data in the first group
takes priority over the data in subsequent groups.
apply-groups-except
Specify which groups not to inherit configuration data from. You can specify more than one group
name.
destination-mac-address
address
(MX Series routers and EX Series switches only) Match the destination media access control
(MAC) address of a virtual private LAN service (VPLS) packet.
To have packets correctly evaluated by this match condition when applied to egress traffic flowing
over a CCC circuit from a logical interface on an I-chip DPC in a Layer 2 virtual private network
(VPN) routing instance, you must make a configuration change to the Layer 2 VPN routing instance.
You must explicitly disable the use of a control word for traffic flowing out over a Layer 2 circuit.
The use of a control word is enabled by default for Layer 2 VPN routing instances to support the
emulated virtual circuit (VC) encapsulation for Layer 2 circuits.
To explicitly disable the use of a control word for Layer 2 VPNs, include the no-control-word
statement at either of the following hierarchy levels:
•
[edit routing-instances routing-instance-name protocols l2vpn]
•
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
l2vpn]
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see “Disabling the Control Word for Layer 2 VPNs” in the Junos OS VPNs
Configuration Guide.
forwarding-class class
Forwarding class. Specify assured-forwarding, best-effort, expedited-forwarding, or network-control.
forwarding-class-except
class
Do not match on the forwarding class. Specify assured-forwarding, best-effort,
expedited-forwarding, or network-control.
Copyright © 2013, Juniper Networks, Inc.
97
PTX Series Packet Transport Switch Software Documentation
Table 11: Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic (continued)
Match Condition
Description
interface-group
group-number
Match the logical interface on which the packet was received to the specified interface group or
set of interface groups. For group-number, specify a single value or a range of values from 0 through
255.
To assign a logical interface to an interface group group-number, specify the group-number at the
[interfaces interface-name unit number family family filter group] hierarchy level.
NOTE: This match condition is not supported on PTX series packet transport switches.
For more information, see Filtering Packets Received on a Set of Interface Groups Overview.
interface-group-except
number
Do not match the logical interface on which the packet was received to the specified interface
group or set of interface groups. For details, see the interface-group match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
learn-vlan-1p-priority number
(MX Series routers and EX Series switches only) Match on the IEEE 802.1p learned VLAN priority
bits in the provider VLAN tag (the only tag in a single-tag frame with 802.1Q VLAN tags or the
outer tag in a dual-tag frame with 802.1Q VLAN tags). Specify a single value or multiple values
from 0 through 7.
Compare with the user-vlan-1p-priority match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
learn-vlan-1p-priority-except
number
(MX Series routers and EX Series switches only) Do not match on the IEEE 802.1p learned VLAN
priority bits. For details, see the learn-vlan-1p-priority match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
loss-priority level
Packet loss priority (PLP) level. Specify a single level or multiple levels: low, medium-low,
medium-high, or high.
Supported on M120 and M320 routers; M7i and M10i routers with the Enhanced CFEB (CFEB-E);
and MX Series routers and EX Series switches.
For IP traffic on M320, MX Series, T Series routers with Enhanced II Flexible PIC Concentrators
(FPCs) and EX Series switches, you must include the tri-color statement at the [edit
class-of-service] hierarchy level to commit a PLP configuration with any of the four levels specified.
If the tri-color statement is not enabled, you can only configure the high and low levels. This
applies to all protocol families.
For information about the tri-color statement and for information about using behavior aggregate
(BA) classifiers to set the PLP level of incoming packets, see the Junos OS Class of Service
Configuration Guide.
loss-priority-except level
Do not match on the packet loss priority level. Specify a single level or multiple levels: low,
medium-low, medium-high, or high.
NOTE: This match condition is not supported on PTX series packet transport switches.
For information about using behavior aggregate (BA) classifiers to set the PLP level of incoming
packets, see the Junos OS Class of Service Configuration Guide.
98
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 11: Standard Firewall Filter Match Conditions for Layer 2 CCC Traffic (continued)
Match Condition
Description
user-vlan-1p-priority number
(MX Series routers and EX Series switches only) Match on the IEEE 802.1p user priority bits in the
customer VLAN tag (the inner tag in a dual-tag frame with 802.1Q VLAN tags). Specify a single
value or multiple values from 0 through 7.
Compare with the learn-vlan-1p-priority match condition.
NOTE: This match condition is not supported on PTX series packet transport switches.
(MX Series routers and EX Series switches only) Do not match on the IEEE 802.1p user priority
bits. For details, see the user-vlan-1p-priority match condition.
user-vlan-1p-priority-except
number
NOTE: This match condition is not supported on PTX series packet transport switches.
Related
Documentation
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Terminating Actions on page 99
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Terminating Actions
Standard stateless firewall filters support different sets of terminating actions for each
protocol family.
NOTE: You cannot configure the next term action with a terminating action
in the same filter term. However, you can configure the next term action with
another nonterminating action in the same filter term.
Table 12 on page 99 describes the terminating actions you can specify in a standard
firewall filter term.
Table 12: Terminating Actions for Standard Firewall Filters
Terminating
Action
Description
Protocols
accept
Accept the packet.
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
family
ethernet-switching
(for EX Series
switches only)
Copyright © 2013, Juniper Networks, Inc.
99
PTX Series Packet Transport Switch Software Documentation
Table 12: Terminating Actions for Standard Firewall Filters (continued)
Terminating
Action
discard
Description
Protocols
Discard a packet silently, without sending an Internet Control Message Protocol
(ICMP) message. Discarded packets are available for logging and sampling.
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
family
ethernet-switching
(for EX
Series
switches
only)
logical-system
logical-system-name
Direct the packet to the specified logical system.
NOTE: This action is not supported on PTX series packet transport switches.
reject message-type
Reject the packet and return an ICMPv4 or ICMPv6 message:
•
If no message-type is specified, a destination unreachable message is returned by
default.
•
If tcp-reset is specified as the message-type, tcp-reset is returned only if the packet
is a TCP packet. Otherwise, the administratively-prohibited message, which has a
value of 13, is returned.
•
If any other message-type is specified, that message is returned.
•
family inet
•
family inet6
•
family inet
•
family inet6
•
family inet
•
family inet6
•
family inet
•
family inet6
NOTE: Rejected packets can be sampled or logged if you configure the sample or
syslog action.
The message-type can be one of the following values: address-unreachable,
administratively-prohibited, bad-host-tos, bad-network-tos, beyond-scope,
fragmentation-needed, host-prohibited, host-unknown, host-unreachable,
network-prohibited, network-unknown, network-unreachable, no-route,
port-unreachable, precedence-cutoff, precedence-violation, protocol-unreachable,
source-host-isolated, source-route-failed, or tcp-reset.
routing-instance
routing-instance-name
Direct the packet to the specified routing instance.
NOTE: This action is not supported on PTX series packet transport switches.
topology
topology-name
Direct the packet to the specified topology.
NOTE: This action is not supported on PTX series packet transport switches.
Each routing instance (master or virtual-router) supports one default topology to
which all forwarding classes are forwarded. For Multitopology Routing, you can
configure a firewall filter on the ingress interface to match a specific forwarding class,
such as expedited forwarding, with a specific topology. The traffic that matches the
specified forwarding class is then added to the routing table for that topology.
100
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Related
Documentation
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Nonterminating Actions on page 101
Standard Firewall Filter Nonterminating Actions
Standard stateless firewall filters support different sets of nonterminating actions for
each protocol family.
NOTE: You cannot configure the next term action with a terminating action
in the same filter term. However, you can configure the next term action with
another nonterminating action in the same filter term.
Table 13 on page 101 describes the nonterminating actions you can configure for a standard
firewall filter term.
Table 13: Nonterminating Actions for Standard Firewall Filters
Nonterminating
Action
Description
Protocol
Families
count counter-name
Count the packet in the named counter.
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
(for EX
Series
switches
only)
Copyright © 2013, Juniper Networks, Inc.
101
PTX Series Packet Transport Switch Software Documentation
Table 13: Nonterminating Actions for Standard Firewall Filters (continued)
Nonterminating
Action
dscp value
Protocol
Families
Description
Set the IPv4 Differentiated Services code point (DSCP) bit. You can specify a
numerical value from 0 through 63. To specify the value in hexadecimal form, include
0x as a prefix. To specify the value in binary form, include b as a prefix.
family inet
The default DSCP value is best effort, that is, be or 0.
You can also specify on the following text synonyms:
•
af11—Assured forwarding class 1, low drop precedence
•
af12—Assured forwarding class 1, medium drop precedence
•
af13—Assured forwarding class 1, high drop precedence
•
af21—Assured forwarding class 2, low drop precedence
•
af22—Assured forwarding class 2, medium drop precedence
•
af23—Assured forwarding class 2, high drop precedence
•
af31—Assured forwarding class 3, low drop precedence
•
af32—Assured forwarding class 3, medium drop precedence
•
af33—Assured forwarding class 3, high drop precedence
•
af41—Assured forwarding class 4, low drop precedence
•
af42—Assured forwarding class 4, medium drop precedence
•
af43—Assured forwarding class 4, high drop precedence
•
be—Best effort
•
cs0—Class selector 0
•
cs1—Class selector 1
•
cs2—Class selector 2
•
cs3—Class selector 3
•
cs4—Class selector 4
•
cs5—Class selector 5
•
cs6—Class selector 6
•
cs7—Class selector 7
•
ef—Expedited forwarding
NOTE: This action is not supported on PTX Series packet transport switches.
NOTE: The actions dscp 0 or dscp be are supported only on T320, T640, T1600, TX
Matrix, TX Matrix Plus,and M320 routers and on the 10-Gigabit Ethernet Modular Port
Concentrators (MPC), 60-Gigabit Ethernet MPC, 60-Gigabit Ethernet Queuing MPC,
and 60-Gigabit Ethernet Enhanced Queuing MPC on MX Series routers (and EX Series
switches). However, these actions are not supported on Enhanced III Flexible PIC
Concentrators (FPCs) on M320 routers.
NOTE: On T4000 routers, the dscp 0 action is not supported during the interoperation
between a T1600 Enhanced Scaling Type 4 FPC and a T4000 Type 5 FPC.
102
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 13: Nonterminating Actions for Standard Firewall Filters (continued)
Nonterminating
Action
forwarding-class
class-name
Description
Protocol
Families
Classify the packet to the named forwarding class:
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
•
forwarding-class-name
•
assured-forwarding
•
best-effort
•
expedited-forwarding
•
network-control
(for EX
Series
switches
only)
ipsec-sa ipsec-sa
Use the specified IPsec security association.
family inet
NOTE: This action is not supported on MX Series routers and EX Series switches,
Type 5 FPCs on T4000 routers, and PTX Series packet transport switches.
load-balance
group-name
Use the specified load-balancing group.
family inet
NOTE: This action is not supported on MX Series routers, EX Series switches, or PTX
Series packet transport switches.
Log the packet header information in a buffer within the Packet Forwarding Engine.
You can access this information by issuing the show firewall log command at the
command-line interface (CLI).
•
family inet
•
family inet6
logical-system
logical-system-name
Direct packets to a specific logical system.
•
family inet
•
family inet6
loss-priority (high |
medium-high |
medium-low | low)
Set the packet loss priority (PLP) level.
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
log
You cannot also configure the three-color-policer nonterminating action for the same
firewall filter term. These two nonterminating actions are mutually exclusive.
Supported on M120 and M320 routers; M7i and M10i routers with the Enhanced CFEB
(CFEB-E); and MX Series routers.
For IP traffic on M320, MX Series, T Series routers with Enhanced II Flexible PIC
Concentrators (FPCs), and EX Series switches, you must include the tri-color
statement at the [edit class-of-service] hierarchy level to commit a PLP configuration
with any of the four levels specified. If the tri-color statement is not enabled, you can
only configure the high and low levels. This applies to all protocol families.
For information about the tri-color statement and for information about using behavior
aggregate (BA) classifiers to set the PLP level of incoming packets, see the Junos OS
Class of Service Configuration Guide.
next-hop-group
group-name
Use the specified next-hop group.
Copyright © 2013, Juniper Networks, Inc.
(for EX
Series
switches
only)
family inet
103
PTX Series Packet Transport Switch Software Documentation
Table 13: Nonterminating Actions for Standard Firewall Filters (continued)
Nonterminating
Action
Description
Protocol
Families
next-interface
interface-name
(MX Series routers and EX Series switches) Direct packets to the specified outgoing
interface.
•
family inet
•
family inet6
next-ip ip-address
(MX Series routers and EX Series switches) Direct packets to the specified destination
IPv4 address.
family inet
next-ip6
ipv6-address
(MX Series routers and EX Series switches) Direct packets to the specified destination
IPv6 address.
family inet6
packet-mode
Updates a bit field in the packet key buffer, which specifies traffic that will bypass
flow-based forwarding. Packets with the packet-mode action modifier follow the
packet-based forwarding path and bypass flow-based forwarding completely. For
more information about selective stateless packet-based services, see the Junos OS
Security Configuration Guide.
family any
policer policer-name
Name of policer to use to rate-limit traffic.
•
family any
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
NOTE: For IPv6, applies to SRX100, SRX210, SRX220, SRX240, and SRX650 devices
only.
(for EX
Series
switches
only)
port-mirror
Port-mirror the packet based on the specified family. Supported on M120 routers,
M320 routers configured with Enhanced III FPCs, MX Series routers and EX Series
switches only.
•
family inet
•
family inet6
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
(for EX
Series
switches
only)
prefix-action
action-name
Count or police packets based on the specified action name.
family inet
NOTE: This action is not supported on PTX Series packet transport switches.
routing-instance
routing-instance-name
104
Direct packets to the specified routing instance.
•
family inet
•
family inet6
Copyright © 2013, Juniper Networks, Inc.
Chapter 10: Firewall Filters
Table 13: Nonterminating Actions for Standard Firewall Filters (continued)
Nonterminating
Action
Description
Protocol
Families
sample
Sample the packet.
•
family inet
•
family inet6
•
family mpls
•
family inet
•
family inet6
•
family inet
•
family inet6
•
family inet
•
family inet6
•
family inet
•
family inet6
•
family mpls
•
family vpls
•
family ccc
•
family bridge
•
family
ethernet-switching
NOTE: The Junos OS does not sample packets originating from the router or switch.
If you configure a filter and apply it to the output side of an interface, then only the
transit packets going through that interface are sampled. Packets that are sent from
the Routing Engine to the Packet Forwarding Engine are not sampled.
service-accounting
Count the packet for service accounting. The count is applied to a specific named
counter (__junos-dyn-service-counter) that RADIUS can obtain.
NOTE: This action is not supported on T4000 Type 5 FPCs and PTX Series packet
transport switches.
service-filter-hit
(Only if the service-filter-hit flag is marked by a previous filter in the current type of
chained filters) Direct the packet to the next type of filters.
Indicate to subsequent filters in the chain that the packet was already processed.
This action, coupled with the service-filter-hit match condition in receiving filters,
helps to streamline filter processing.
NOTE: This action is not supported on T4000 Type 5 FPCs and PTX Series packet
transport switches.
syslog
three-color-policer
(single-rate |
two-rate)
policer-name
Log the packet to the system log file.
Police the packet using the specified single-rate or two-rate three-color-policer.
You cannot also configure the loss-priority action for the same firewall filter term.
These two actions are mutually exclusive.
(for EX
Series
switches
only)
Copyright © 2013, Juniper Networks, Inc.
105
PTX Series Packet Transport Switch Software Documentation
Table 13: Nonterminating Actions for Standard Firewall Filters (continued)
Nonterminating
Action
traffic-class value
Protocol
Families
Description
Specify the traffic-class code point. You can specify a numerical value from 0 through
63. To specify the value in hexadecimal form, include 0x as a prefix. To specify the
value in binary form, include b as a prefix.
family inet6
The default traffic-class value is best effort, that is, be or 0.
In place of the numeric value, you can specify one of the following text synonyms:
•
af11—Assured forwarding class 1, low drop precedence
•
af12—Assured forwarding class 1, medium drop precedence
•
af13—Assured forwarding class 1, high drop precedence
•
af21—Assured forwarding class 2, low drop precedence
•
af22—Assured forwarding class 2, medium drop precedence
•
af23—Assured forwarding class 2, high drop precedence
•
af31—Assured forwarding class 3, low drop precedence
•
af32—Assured forwarding class 3, medium drop precedence
•
af33—Assured forwarding class 3, high drop precedence
•
af41—Assured forwarding class 4, low drop precedence
•
af42—Assured forwarding class 4, medium drop precedence
•
af43—Assured forwarding class 4, high drop precedence
•
be—Best effort
•
cs0—Class selector 0
•
cs1—Class selector 1
•
cs2—Class selector 2
•
cs3—Class selector 3
•
cs4—Class selector 4
•
cs5—Class selector 5
•
cs6—Class selector 6
•
cs7—Class selector 7
•
ef—Expedited forwarding
NOTE: The actions traffic-class 0 or traffic-class be are supported only on T Series
and M320 routers and on the 10-Gigabit Ethernet Modular Port Concentrator (MPC),
60-Gigabit Ethernet MPC, 60-Gigabit Ethernet Queuing MPC, and 60-Gigabit Ethernet
Enhanced Queuing MPC on MX Series routers (and EX Series switches). However,
these actions are not supported on Enhanced III Flexible PIC Concentrators (FPCs)
on M320 routers.
Related
Documentation
106
•
Guidelines for Configuring Standard Firewall Filters
•
Standard Firewall Filter Terminating Actions on page 99
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 11
Configuration Statements
Copyright © 2013, Juniper Networks, Inc.
107
PTX Series Packet Transport Switch Software Documentation
accept-source-mac
Syntax
Hierarchy Level
Release Information
Description
accept-source-mac {
mac-address mac-address {
policer {
input cos-policer-name;
output cos-policer-name;
}
}
}
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1 for PTX Packet Transport Switches.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
For Gigabit Ethernet intelligent queuing (IQ) interfaces only, accept traffic from and to
the specified remote media access control (MAC) address.
The accept-source-mac statement is equivalent to the source-address-filter statement,
which is valid for aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces
only.
On untagged Gigabit Ethernet interfaces, you should not configure the source-address-filter
statement and the accept-source-mac statement simultaneously. On tagged Gigabit
Ethernet interfaces, you should not configure the source-address-filter statement and
the accept-source-mac statement with an identical MAC address specified in both filters.
The statements are explained separately.
NOTE: The policer statement is not supported on PTX Series Packet Transport
Switches.
Required Privilege
Level
Related
Documentation
108
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring MAC Address Filtering
•
Configuring MAC Filtering on PTX Series Packet Transport Switches on page 17
•
source-filtering on page 139
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
action-fpc-restart-disable
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
action-fpc-restart-disable;
[edit chassis fabric degraded]
Statement added in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.1X48R4 for PTX Series Packet Transport
Switches.
Allow the user to disable restarting of the FPCs during healing from a degraded fabric
condition. The device can automatically recover from degraded fabric conditions by
restarting both the fabric planes and the FPCs. If the action-fpc-restart-disable statement
is configured, the healing attempt is limited to restarting the fabric planes only.
The system will detect a blackholing condition and try to heal the system.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Disabling FPC Restart on page 44
•
Traffic Black Hole Caused by Fabric Degradation on page 43
degraded
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
degraded {
action-fpc-restart-disable;
degraded-fabric-detection-enable;
degraded-fpc-bad-plane-threshold number-bad-planes;
}
[edit chassis fabric degraded]
Statement introduced in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.1X48R4 for PTX Series Packet Transport
Switches.
Configure options that apply to degraded chassis fabric conditions.
The statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Traffic Black Hole Caused by Fabric Degradation on page 43
•
Disabling FPC Restart on page 44
Copyright © 2013, Juniper Networks, Inc.
109
PTX Series Packet Transport Switch Software Documentation
degraded-fabric-detection-enable
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
degraded-fabric-detection-enable;
[edit chassis fabric degraded]
Statement introduced in Junos OS Release 12.1X48R4 for PTX Series Packet Transport
Switches.
Enable detection of an FPC with degraded fabric.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Traffic Black Hole Caused by Fabric Degradation on page 43
•
Disabling FPC Restart on page 44
degraded-fpc-bad-plane-threshold
Syntax
Hierarchy Level
Release Information
Description
Options
degraded-fpc-bad-plane-threshold number-bad-planes;
[edit chassis fabric degraded]
Statement introduced in Junos OS Release 12.1X48R4 for PTX Series Packet Transport
Switches.
Configure the number of bad planes that indicate an FPC is degraded.
number-bad-planes—Number of bad planes.
Range: 4 through 18
Default: 4
Required Privilege
Level
Related
Documentation
110
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Traffic Black Hole Caused by Fabric Degradation on page 43
•
Disabling FPC Restart on page 44
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
encapsulation (Logical Interface)
Syntax
encapsulation (atm-ccc-cell-relay | atm-ccc-vc-mux | atm-cisco-nlpid | atm-mlppp-llc |
atm-nlpid | atm-ppp-llc | atm-ppp-vc-mux | atm-snap | atm-tcc-snap | atm-tcc-vc-mux
| atm-vc-mux | ether-over-atm-llc | ether-vpls-over-atm-llc | ether-vpls-over-fr |
ether-vpls-over-ppp | ethernet | ethernet-vpls | ethernet-vpls-fr | frame-relay-ccc |
frame-relay-ether-type | frame-relay-ether-type-tcc | frame-relay-ppp | frame-relay-tcc
| gre-fragmentation | multilink-frame-relay-end-to-end | multilink-ppp | ppp-over-ether |
ppp-over-ether-over-atm-llc | vlan-bridge | vlan-ccc | vlan-vci-ccc | vlan-tcc | vlan-vpls);
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],
[edit interfaces rlsq number unit logical-unit-number]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches
(vlan-ccc and vlan-tcc options only).
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers. Only the atm-ccc-cell-relay and atm-ccc-vc-mux options are supported on ACX
Series routers.
Description
Options
Configure a logical link-layer encapsulation type.
atm-ccc-cell-relay—Use ATM cell-relay encapsulation.
atm-ccc-vc-mux—Use ATM virtual circuit (VC) multiplex encapsulation on CCC circuits.
When you use this encapsulation type, you can configure the ccc family only.
atm-cisco-nlpid—Use Cisco ATM network layer protocol identifier (NLPID) encapsulation.
When you use this encapsulation type, you can configure the inet family only.
atm-mlppp-llc—For ATM2 IQ interfaces only, use Multilink Point-to-Point (MLPPP) over
AAL5 LLC. For this encapsulation type, your router must be equipped with a Link
Services or Voice Services PIC. MLPPP over ATM encapsulation is not supported on
ATM2 IQ OC48 interfaces.
atm-nlpid—Use ATM NLPID encapsulation. When you use this encapsulation type, you
can configure the inet family only.
atm-ppp-llc—(ATM2 IQ interfaces and MX Series routers with MPC/MIC interfaces using
the ATM MIC with SFP only) Use PPP over AAL5 LLC encapsulation.
atm-ppp-vc-mux—(ATM2 IQ interfaces and MX Series routers with MPC/MIC interfaces
using the ATM MIC with SFP only) Use PPP over ATM AAL5 multiplex encapsulation.
atm-snap—(All interfaces including MX Series routers with MPC/MIC interfaces using
the ATM MIC with SFP) Use ATM subnetwork attachment point (SNAP)
encapsulation.
atm-tcc-snap—Use ATM SNAP encapsulation on translational cross-connect (TCC)
circuits.
Copyright © 2013, Juniper Networks, Inc.
111
PTX Series Packet Transport Switch Software Documentation
atm-tcc-vc-mux—Use ATM VC multiplex encapsulation on TCC circuits. When you use
this encapsulation type, you can configure the tcc family only.
atm-vc-mux—(All interfaces including MX Series routers with MPC/MIC interfaces using
the ATM MIC with SFP) Use ATM VC multiplex encapsulation. When you use this
encapsulation type, you can configure the inet family only.
ether-over-atm-llc—(All IP interfaces including MX Series routers with MPC/MIC interfaces
using the ATM MIC with SFP) For interfaces that carry IP traffic, use Ethernet over
ATM LLC encapsulation. When you use this encapsulation type, you cannot configure
multipoint interfaces.
ether-vpls-over-atm-llc—For ATM2 IQ interfaces only, use the Ethernet virtual private
LAN service (VPLS) over ATM LLC encapsulation to bridge Ethernet interfaces and
ATM interfaces over a VPLS routing instance (as described in RFC 2684, Multiprotocol
Encapsulation over ATM Adaptation Layer 5). Packets from the ATM interfaces are
converted to standard ENET2/802.3 encapsulated Ethernet frames with the frame
check sequence (FCS) field removed.
ether-vpls-over-fr—For E1, T1, E3, T3, and SONET interfaces only, use the Ethernet virtual
private LAN service (VPLS) over Frame Relay encapsulation to support Bridged
Ethernet over Frame Relay encapsulated TDM interfaces for VPLS applications, per
RFC 2427, Multiprotocol Interconnect over Frame Relay.
NOTE: The SONET/SDH OC3/STM1 (Multi-Rate) MIC with SFP, the
Channelized SONET/SDH OC3/STM1 (Multi-Rate) MIC with SFP, and the
DS3/E3 MIC do not support Ethernet over Frame Relay encapsulation.
ether-vpls-over-ppp—For E1, T1, E3, T3, and SONET interfaces only, use the Ethernet
virtual private LAN service (VPLS) over Point-to-Point Protocol (PPP) encapsulation
to support Bridged Ethernet over PPP-encapsulated TDM interfaces for VPLS
applications.
ethernet—Use Ethernet II encapsulation (as described in RFC 894, A Standard for the
Transmission of IP Datagrams over Ethernet Networks).
ethernet-vpls—Use Ethernet VPLS encapsulation on Ethernet interfaces that have VPLS
enabled and that must accept packets carrying standard Tag Protocol ID (TPID)
values.
NOTE: The built-in Gigabit Ethernet PIC on an M7i router does not support
extended VLAN VPLS encapsulation.
112
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
ethernet-vpls-fr—Use in a VPLS setup when a CE device is connected to a PE device over
a time-division multiplexing (TDM) link. This encapsulation type enables the PE
device to terminate the outer layer 2 Frame Relay connection, use the 802.1p bits
inside the inner Ethernet header to classify the packets, look at the MAC address
from the Ethernet header, and use the MAC address to forward the packet into a
given VPLS instance.
frame-relay-ccc—Use Frame Relay encapsulation on CCC circuits. When you use this
encapsulation type, you can configure the ccc family only.
frame-relay-ether-type—Use Frame Relay ether type encapsulation for compatibility with
Cisco Frame Relay. The physical interface must be configured with
flexible-frame-relay encapsulation.
frame-relay-ether-type-tcc—Use Frame Relay ether type TCC for Cisco-compatible Frame
Relay on TCC circuits to connect different media. The physical interface must be
configured with flexible-frame-relay encapsulation.
frame-relay-ppp—Use PPP over Frame Relay circuits. When you use this encapsulation
type, you can configure the ppp family only. J Series routers do not support
frame-relay-ppp encapsulation.
frame-relay-tcc—Use Frame Relay encapsulation on TCC circuits for connecting different
media. When you use this encapsulation type, you can configure the tcc family only.
gre-fragmentation—For adaptive services interfaces only, use GRE fragmentation
encapsulation to enable fragmentation of IPv4 packets in GRE tunnels. This
encapsulation clears the do not fragment (DF) bit in the packet header. If the packet’s
size exceeds the tunnel’s maximum transmission unit (MTU) value, the packet is
fragmented before encapsulation.
multilink-frame-relay-end-to-end—Use MLFR FRF.15 encapsulation. This encapsulation
is used only on multilink, link services, and voice services interfaces and their
constituent T1 or E1 interfaces, and is supported on LSQ and redundant LSQ interfaces.
multilink-ppp—Use MLPPP encapsulation. This encapsulation is used only on multilink,
link services, and voice services interfaces and their constituent T1 or E1 interfaces.
ppp-over-ether—For underlying Ethernet interfaces on J Series routers, use PPP over
Ethernet encapsulation. When you use this encapsulation type, you cannot configure
the interface address. Instead, configure the interface address on the PPP interface.
You also use PPP over Ethernet encapsulation to configure an underlying Ethernet
interface for a dynamic PPPoE logical interface on M120 and M320 routers with
Intelligent Queuing 2 (IQ2) PICs, and on MX Series routers with MPCs.
ppp-over-ether-over-atm-llc—(J Series routers and MX Series routers with MPCs using
the ATM MIC with SFP only) For underlying ATM interfaces, use PPP over Ethernet
over ATM LLC encapsulation. When you use this encapsulation type, you cannot
configure the interface address. Instead, configure the interface address on the PPP
interface.
Copyright © 2013, Juniper Networks, Inc.
113
PTX Series Packet Transport Switch Software Documentation
vlan-bridge—Use Ethernet VLAN bridge encapsulation on Ethernet interfaces that have
IEEE 802.1Q tagging, flexible-ethernet-services, and bridging enabled and that must
accept packets carrying TPID 0x8100 or a user-defined TPID.
vlan-ccc—Use Ethernet virtual LAN (VLAN) encapsulation on CCC circuits. When you use
this encapsulation type, you can configure the ccc family only.
vlan-vci-ccc—Use ATM-to-Ethernet interworking encapsulation on CCC circuits. When
you use this encapsulation type, you can configure the ccc family only.
vlan-tcc—Use Ethernet VLAN encapsulation on TCC circuits. When you use this
encapsulation type, you can configure the tcc family only.
vlan-vpls—Use Ethernet VLAN encapsulation on VPLS circuits.
Required Privilege
Level
Related
Documentation
114
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Layer 2 Switching Cross-Connects Using CCC
•
Configuring the Encapsulation for Layer 2 Switching TCCs
•
Configuring Interface Encapsulation on Logical Interfaces
•
Configuring MPLS LSP Tunnel Cross-Connects Using CCC
•
Circuit and Translational Cross-Connects Overview
•
Identifying the Access Concentrator
•
Configuring ATM Interface Encapsulation
•
Configuring VLAN Encapsulation
•
Configuring Extended VLAN Encapsulation
•
Configuring ISDN Logical Interface Properties
•
Configuring ATM-to-Ethernet Interworking
•
Configuring Interface Encapsulation on PTX Series Packet Transport Switches on
page 19
•
Configuring CCC Encapsulation for Layer 2 VPNs
•
Configuring TCC Encapsulation for Layer 2 VPNs and Layer 2 Circuits
•
Configuring ATM for Subscriber Access
•
Junos Services Interfaces Configuration Release 11.2
•
CoS on ATM IMA Pseudowire Interfaces Overview
•
Configuring Policing on an ATM IMA Pseudowire
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
encapsulation (Physical Interface)
Syntax
Hierarchy Level
Release Information
Description
Default
Options
encapsulation (atm-ccc-cell-relay | atm-pvc | cisco-hdlc | cisco-hdlc-ccc | cisco-hdlc-tcc |
ethernet-bridge | ethernet-ccc | ethernet-over-atm | ethernet-tcc | ethernet-vpls |
ethernet-vpls-fr | ether-vpls-over-atm-llc | ethernet-vpls-ppp |extended-frame-relay-ccc
| extended-frame-relay-ether-type-tcc | extended-frame-relay-tcc | extended-vlan-bridge
| extended-vlan-ccc | extended-vlan-tcc | extended-vlan-vpls | flexible-ethernet-services
| flexible-frame-relay | frame-relay | frame-relay-ccc | frame-relay-ether-type |
frame-relay-ether-type-tcc | frame-relay-port-ccc | frame-relay-tcc | generic-services |
multilink-frame-relay-uni-nni | ppp | ppp-ccc | ppp-tcc | vlan-ccc | vlan-vci-ccc | vlan-vpls);
[edit interfaces interface-name],
[edit interfaces rlsq number:number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches
(flexible-ethernet-services, ethernet-ccc, and ethernet-tcc options only).
Specify the physical link-layer encapsulation type. Not all encapsulation types are
supported on the switches. See the switch CLI.
ppp—Use serial PPP encapsulation.
atm-ccc-cell-relay—Use ATM cell-relay encapsulation.
atm-pvc—Use ATM PVC encapsulation.
cisco-hdlc—Use Cisco-compatible High-Level Data Link Control (HDLC) framing.
cisco-hdlc-ccc—Use Cisco-compatible HDLC framing on CCC circuits.
cisco-hdlc-tcc—Use Cisco-compatible HDLC framing on TCC circuits for connecting
different media.
ethernet-bridge—Use Ethernet bridge encapsulation on Ethernet interfaces that have
bridging enabled and that must accept all packets.
ethernet-ccc—Use Ethernet CCC encapsulation on Ethernet interfaces that must accept
packets carrying standard Tag Protocol ID (TPID) values. For 8-port, 12-port, and
48-port Fast Ethernet PICs, CCC is not supported.
ethernet-over-atm—For interfaces that carry IPv4 traffic, use Ethernet over ATM
encapsulation. When you use this encapsulation type, you cannot configure multipoint
interfaces. As defined in RFC 2684, Multiprotocol Encapsulation over ATM Adaptation
Layer 5, this encapsulation type allows ATM interfaces to connect to devices that
support only bridge protocol data units (BPDUs). Junos OS does not completely
support bridging, but accepts BPDU packets as a default gateway. If you use the
router as an edge device, then the router acts as a default gateway. It accepts
Ethernet LLC/SNAP frames with IP or ARP in the payload, and drops the rest. For
packets destined to the Ethernet LAN, a route lookup is done using the destination
Copyright © 2013, Juniper Networks, Inc.
115
PTX Series Packet Transport Switch Software Documentation
IP address. If the route lookup yields a full address match, the packet is encapsulated
with an LLC/SNAP and MAC header, and the packet is forwarded to the ATM interface.
ethernet-tcc—For interfaces that carry IPv4 traffic, use Ethernet TCC encapsulation on
interfaces that must accept packets carrying standard TPID values. For 8-port,
12-port, and 48-port Fast Ethernet PICs, TCC is not supported.
ethernet-vpls—Use Ethernet VPLS encapsulation on Ethernet interfaces that have VPLS
enabled and that must accept packets carrying standard TPID values. On M Series
routers, except the M320 router, the 4-port Fast Ethernet TX PIC and the 1-port,
2-port, and 4-port, 4-slot Gigabit Ethernet PICs can use the Ethernet VPLS
encapsulation type.
ethernet-vpls-fr—Use in a VPLS setup when a CE device is connected to a PE device over
a time division multiplexing (TDM) link. This encapsulation type enables the PE
device to terminate the outer layer 2 Frame Relay connection, use the 802.1p bits
inside the inner Ethernet header to classify the packets, look at the MAC address
from the Ethernet header, and use the MAC address to forward the packet into a
given VPLS instance.
ethernet-vpls-ppp—Use in a VPLS setup when a CE device is connected to a PE device
over a time division multiplexing (TDM) link. This encapsulation type enables the PE
device to terminate the outer layer 2 PPP connection, use the 802.1p bits inside the
inner Ethernet header to classify the packets, look at the MAC address from the
Ethernet header, and use it to forward the packet into a given VPLS instance.
ether-vpls-over-atm-llc—For ATM intelligent queuing (IQ) interfaces only, use the Ethernet
virtual private LAN service (VPLS) over ATM LLC encapsulation to bridge Ethernet
interfaces and ATM interfaces over a VPLS routing instance (as described in
RFC 2684, Multiprotocol Encapsulation over ATM Adaptation Layer 5). Packets from
the ATM interfaces are converted to standard ENET2/802.3 encapsulated Ethernet
frames with the frame check sequence (FCS) field removed.
extended-frame-relay-ccc—Use Frame Relay encapsulation on CCC circuits. This
encapsulation type allows you to dedicate DLCIs 1 through 1022 to CCC.
extended-frame-relay-ether-type-tcc—Use extended Frame Relay ether type TCC for
Cisco-compatible Frame Relay for DLCIs 1 through 1022. This encapsulation type is
used for circuits with different media on either side of the connection.
extended-frame-relay-tcc—Use Frame Relay encapsulation on TCC circuits to connect
different media. This encapsulation type allows you to dedicate DLCIs 1 through 1022
to TCC.
extended-vlan-bridge—Use extended VLAN bridge encapsulation on Ethernet interfaces
that have IEEE 802.1Q VLAN tagging and bridging enabled and that must accept
packets carrying TPID 0x8100 or a user-defined TPID.
116
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
extended-vlan-ccc—Use extended VLAN encapsulation on CCC circuits with Gigabit
Ethernet and 4-port Fast Ethernet interfaces that must accept packets carrying
802.1Q values. For 8-port, 12-port, and 48-port Fast Ethernet PICs, extended VLAN
CCC is not supported. For 4-port Gigabit Ethernet PICs, extended VLAN CCC is not
supported.
extended-vlan-tcc—For interfaces that carry IPv4 traffic, use extended VLAN encapsulation
on TCC circuits with Gigabit Ethernet interfaces on which you want to use 802.1Q
tagging. For 4-port Gigabit Ethernet PICs, extended VLAN TCC is not supported.
extended-vlan-vpls—Use extended VLAN VPLS encapsulation on Ethernet interfaces
that have VLAN 802.1Q tagging and VPLS enabled and that must accept packets
carrying TPIDs 0x8100, 0x9100, and 0x9901. On M Series routers, except the M320
router, the 4-port Fast Ethernet TX PIC and the 1-port, 2-port, and 4-port, 4-slot
Gigabit Ethernet PICs can use the Ethernet VPLS encapsulation type.
NOTE: The built-in Gigabit Ethernet PIC on an M7i router does not support
extended VLAN VPLS encapsulation.
flexible-ethernet-services—For Gigabit Ethernet IQ interfaces and Gigabit Ethernet PICs
with small form-factor pluggable transceivers (SFPs) (except the 10-port Gigabit
Ethernet PIC and the built-in Gigabit Ethernet port on the M7i router), use flexible
Ethernet services encapsulation when you want to configure multiple per-unit
Ethernet encapsulations. Aggregated Ethernet bundles can use this encapsulation
type. This encapsulation type allows you to configure any combination of route, TCC,
CCC, Layer 2 virtual private networks (VPNs), and VPLS encapsulations on a single
physical port. If you configure flexible Ethernet services encapsulation on the physical
interface, VLAN IDs from 1 through 511 are no longer reserved for normal VLANs.
flexible-frame-relay—For IQ interfaces only, use flexible Frame Relay encapsulation when
you want to configure multiple per-unit Frame Relay encapsulations. This
encapsulation type allows you to configure any combination of TCC, CCC, and
standard Frame Relay encapsulations on a single physical port. Also, each logical
interface can have any DLCI value from 1 through 1022.
frame-relay—Use Frame Relay encapsulation.
frame-relay-ccc—Use Frame Relay encapsulation on CCC circuits.
frame-relay-ether-type—Use Frame Relay ether type encapsulation for compatibility with
the Cisco Frame Relay.
frame-relay-ether-type-tcc—Use Frame Relay ether type TCC for Cisco-compatible Frame
Relay on TCC circuits to connect different media.
frame-relay-port-ccc—Use Frame Relay port CCC encapsulation to transparently carry
all the DLCIs between two customer edge (CE) routers without explicitly configuring
each DLCI on the two provider edge (PE) routers with Frame Relay transport. When
you use this encapsulation type, you can configure the ccc family only.
Copyright © 2013, Juniper Networks, Inc.
117
PTX Series Packet Transport Switch Software Documentation
frame-relay-tcc—Use Frame Relay encapsulation on TCC circuits to connect different
media.
generic-services—Use generic services encapsulation for services with a hierarchical
scheduler.
multilink-frame-relay-uni-nni—Use MLFR UNI NNI encapsulation. This encapsulation is
used on link services, voice services interfaces functioning as FRF.16 bundles, and
their constituent T1 or E1 interfaces, and is supported on LSQ and redundant LSQ
interfaces.
ppp—Use serial PPP encapsulation.
ppp-ccc—Use serial PPP encapsulation on CCC circuits. When you use this encapsulation
type, you can configure the ccc family only.
ppp-tcc—Use serial PPP encapsulation on TCC circuits for connecting different media.
When you use this encapsulation type, you can configure the tcc family only.
vlan-ccc—Use Ethernet VLAN encapsulation on CCC circuits.
vlan-vci-ccc—Use ATM-to-Ethernet interworking encapsulation on CCC circuits. When
you use this encapsulation type, you can configure the ccc family only. All logical
interfaces configured on the Ethernet interface must also have the encapsulation
type set to vlan-vci-ccc.
vlan-vpls—Use VLAN VPLS encapsulation on Ethernet interfaces with VLAN tagging and
VPLS enabled. Interfaces with VLAN VPLS encapsulation accept packets carrying
standard TPID values only. On M Series routers, except the M320 router, the 4-port
Fast Ethernet TX PIC and the 1-port, 2-port, and 4-port, 4-slot Gigabit Ethernet PICs
can use the Ethernet VPLS encapsulation type.
NOTE: Label-switched interfaces (LSIs) do not support VLAN VPLS
encapsulation. Therefore, you can only use VLAN VPLS encapsulation on a
PE-router-to-CE-router interface and not a core-facing interface.
Required Privilege
Level
118
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
Related
Documentation
•
Configuring Interface Encapsulation on Physical Interfaces
•
Configuring CCC Encapsulation for Layer 2 VPNs
•
Configuring Layer 2 Switching Cross-Connects Using CCC
•
Configuring TCC Encapsulation for Layer 2 VPNs and Layer 2 Circuits
•
Configuring ATM Interface Encapsulation
•
Configuring ATM-to-Ethernet Interworking
•
Configuring VLAN Encapsulation
•
Configuring Extended VLAN Encapsulation
•
Configuring Encapsulation for Layer 2 Wholesale VLAN Interfaces
•
Configuring Interfaces for Layer 2 Circuits
•
Configuring Interface Encapsulation on PTX Series Packet Transport Switches on
page 19
•
Configuring an MPLS-Based Layer 2 VPN (CLI Procedure)
•
Configuring MPLS LSP Tunnel Cross-Connects Using CCC
•
Configuring TCC
•
Configuring VPLS Interface Encapsulation
•
Configuring Interfaces for VPLS Routing
•
Defining the Encapsulation for Switching Cross-Connects
•
Understanding Encapsulation on an Interface
Copyright © 2013, Juniper Networks, Inc.
119
PTX Series Packet Transport Switch Software Documentation
framing (10-Gigabit Ethernet Interfaces)
Syntax
Hierarchy Level
Release Information
Description
framing (lan-phy | wan-phy);
[edit interfaces xe-fpc/pic/port]
Statement introduced in Junos OS Release 8.0.
For routers supporting the 10-Gigabit Ethernet interface, configure the framing format.
WAN PHY mode is supported on MX240, MX480, MX960, T640, T1600, and T4000
routers only.
NOTE:
Default
Options
•
The T4000 Core Router supports only LAN PHY mode in Junos OS Release
12.1R1. Starting with Junos OS Release 12.1R2, WAN PHY mode is supported
on the T4000 routers with the 12-port 10-Gigabit Ethernet LAN/WAN PIC
with SFP+ (PF-12XGE-SFPP). Starting with Junos OS Release 12.2, WAN
PHY mode is supported on the T4000 routers with the 24-port 10-Gigabit
Ethernet LAN/WAN PIC with SFP+ (PF-24XGE-SFPP).
•
When the PHY mode changes, interface traffic is disrupted because of port
reinitialization.
Operates in LAN PHY mode.
lan-phy—10GBASE-R interface framing format that bypasses the WIS sublayer to directly
stream block-encoded Ethernet frames on a 10-Gigabit Ethernet serial interface.
wan-phy—10GBASE-W interface framing format that allows 10-Gigabit Ethernet wide
area links to use fiber-optic cables and SONET devices.
Required Privilege
Level
Related
Documentation
120
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
10-Gigabit Ethernet Framing Overview on page 15
•
Configuring SONET Options for 10-Gigabit Ethernet Interfaces
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
flexible-vlan-tagging
Syntax
Hierarchy Level
Release Information
Description
flexible-vlan-tagging;
[edit interfaces ge-fpc/pic/port],
[edit interfaces et-fpc/pic/port]
[edit interfaces interface-name]
Statement introduced in Junos OS Release 8.1.
Support for aggregated Ethernet added in Junos OS Release 9.0.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Simultaneously supports transmission of 802.1Q VLAN single-tag and dual-tag frames
on logical interfaces on the same Ethernet port.
This statement is supported on M Series and T Series routers, for Fast Ethernet and
Gigabit Ethernet interfaces only on Gigabit Ethernet IQ2 and IQ2-E, IQ, and IQE PICs, and
for aggregated Ethernet interfaces with member links in IQ2, IQ2-E, and IQ PICs or in MX
Series DPCs, or on Ethernet interfaces for PTX Series Packet Transport Switches.
The statements are explained separately.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Mixed Tagging
•
Configuring Flexible VLAN Tagging on PTX Series Packet Transport Switches on page 18
Copyright © 2013, Juniper Networks, Inc.
121
PTX Series Packet Transport Switch Software Documentation
forwarding-classes (Class-of-Service)
Syntax
Hierarchy Level
Release Information
Description
forwarding-classes {
class queue-num queue-number priority (high | low);
queue queue-number class-name priority (high | low) [ policing-priority (premium | normal) ];
}
[edit class-of-service]
Statement introduced before Junos OS Release 7.4.
policing-priority option introduced in Junos OS Release 9.5.
Statement introduced on PTX Series Packet Transport Switches in Junos OS Release
12.1.
Associate the forwarding class with a queue name and number. For M320, MX Series, T
Series routers and EX Series switches only, you can configure fabric priority queuing by
including the priority statement. For Enhanced IQ PICs, you can include the policing-priority
option.
NOTE: The priority add policing-priority options are not supported on PTX
Series Packet Transport Switches.
The statements are explained separately.
See Configuring Forwarding Classes, Overriding Fabric Priority Queuing, and Example:
Configuring CoS for a PBB Network. For the policing-priority option, see Configuring Layer
2 Policers on IQE PICs. For classification by egress interface, see Classifying Packets by
Egress Interface.
Required Privilege
Level
122
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
forwarding-mode (PTX Series Packet Transport Switches)
Syntax
Hierarchy Level
Release Information
Description
forwarding-mode {
sa-multicast
}
[edit chassis fpc slot pic slot port port-number]
Statement introduced in Junos OS Release 12.1X48R4.
Configure interoperability between 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP.
The remaining statement is explained separately.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4 on page 38
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
PF-1CGE-CFP
•
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs PF-1CGE-CFP
and PD-1CE-CFP-FPC4
Copyright © 2013, Juniper Networks, Inc.
123
PTX Series Packet Transport Switch Software Documentation
fru-poweron-sequence
Syntax
Hierarchy Level
Release Information
Description
fru-poweron-sequence fru-poweron-sequence;
[edit chassis]
Statement introduced in Junos OS Release 10.0.
Statement introduced in Junos OS Release 12.1 for PTX Series packet transport switches.
Statement introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Statement introduced in Junos OS Release 12.3 for T640, T1600, and T4000 routers.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
(MX Series 3D Universal Edge Routers only) Configure the power-on sequence for the
DPCs in the chassis for routers with the enhanced AC Power Entry Module (PEM).
(EX series switches, T640 routers, T1600 routers, T4000 routers, MX2020 routers, and
PTX Series packet transport switches) Configure the power-on sequence for Flexible
PIC Concentrators (FPCs) installed in the chassis.
Options
(MX Series 3D Universal Edge Routers only) fru-poweron-sequence—Power-on sequence
for the DPCs in the chassis. The numbers indicate the slot number of the DPCs.
NOTE: If the power-on sequence is not configured by including the
fru-poweron-sequence statement, Junos OS uses the /var/log/poweron_seq.log
file to determine the power-on sequence for the last power-on operation for
the DPCs and the same sequence is used. If the /var/log/boot_seq.log file, is
not available, Junos OS uses the ascending order of the slot numbers of the
DPCs as the sequence to power on the DPCs.
(EX series switches, T640 routers, T1600 routers, T4000 routers, MX2020 routers, and
PTX Series packet transport switches) fru-poweron-sequence—Power-on sequence
for the FPCs in the chassis. The numbers indicate the slot number of the FPCs.
NOTE:
Required Privilege
Level
124
•
If the configured sequence contains invalid numbers, Junos OS considers
only the valid numbers in the sequence. The invalid numbers are silently
discarded.
•
If the power-on sequence is not configured by including the
fru-poweron-sequence statement, Junos OS uses the ascending order of
the slot numbers of the FPCs as the sequence to power on the FPCs.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
Related
Documentation
•
Configuring the Power-On Sequence for DPCs on MX Series Routers with the Enhanced
AC PEM
•
Configuring the Power-On Sequence for FPCs on PTX Series Packet Transport Switches
on page 34
•
Configuring the Power-On Sequence for FPCs on T640, T1600, and T4000 Routers
hold-interval (OAM)
Syntax
Hierarchy Level
hold-interval minutes;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name continuity-check]
Release Information
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Description
The time to wait before flushing the maintenance association end point (MEP) database,
if no updates occur.
Options
Required Privilege
Level
Related
Documentation
minutes—Time to wait, in minutes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Continuity Check Protocol
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
Copyright © 2013, Juniper Networks, Inc.
125
PTX Series Packet Transport Switch Software Documentation
level
Syntax
Hierarchy Level
Release Information
Description
Options
level number;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
A number used in CFM messages to identify the maintenance association.
number—A number used to identify the maintenance domain to which the CFM message
belongs.
Range: 0 through 7
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring the Maintenance Domain Level
•
Example: Configuring Connectivity Fault Management for a PBB Network
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
loss-threshold
Syntax
Hierarchy Level
Release Information
loss-threshold number;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name continuity-check]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Description
Specify the number of continuity check messages lost before marking the remote MEP
as down.
Options
number—The number of continuity check messages that can be lost before the remote
MEP is considered down.
Required Privilege
Level
Related
Documentation
126
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Continuity Check Protocol
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
maintenance-domain
Syntax
Hierarchy Level
Release Information
Description
Options
maintenance-domain domain-name {
bridge-domain name <vlan-id [ vlan-ids ]>;
instance vpls-instance-name;
level number;
maintenance-association ma-name {
protect-maintenance-association protect-ma-name;
remote-maintenance-association remote-ma-name;
short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id);
continuity-check {
hold-interval minutes;
interval (10m | 10s | 1m | 1s| 100ms);
loss-threshold number
}
mep mep-id {
auto-discovery;
direction (up | down);
interface interface-name (protect | working);
lowest-priority-defect (all-defects | err-xcon | mac-rem-err-xcon | no-defect |
rem-err-xcon | xcon );
priority number;
remote-mep mep-id {
action-profile profile-name;
sla-iterator-profile profile-name {
data-tlv-size size;
iteration-count count-value;
priority priority-value;
}
}
}
mip-half-function(none | default | explicit);
name-format (character-string | none | dns | mac+2oct);
}
virtual-switch name {
bridge-domain name <vlan-id [ vlan-ids ]>;
}
}
[edit protocols oam ethernet connectivity-fault-management]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Configure the name of the maintenance domain in IEEE-compliant format.
domain-name—Name of the maintenance domain.
The remaining statements are explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2013, Juniper Networks, Inc.
127
PTX Series Packet Transport Switch Software Documentation
Related
Documentation
•
Creating the Maintenance Domain
•
Configuring a Maintenance Endpoint
•
Example: Configuring Connectivity Fault Management for a PBB Network
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
maximum-links
Syntax
Hierarchy Level
Release Information
Description
Options
maximum-links maximum-links-limit;
[edit chassis aggregated-devices]
Statement introduced in Junos OS Release 11.1 for T Series routers.
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
Statement introduced in Junos OS Release 12.2 for the M Series and MX Series routers.
Configure the maximum links limit for aggregated devices.
maximum-links-limit—Maximum links limit for aggregated devices.
Range: 16, 32; (PTX Series systems only in Junos OS Release 12.3) 64
Required Privilege
Level
Related
Documentation
128
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Junos OS for Supporting Aggregated Devices
•
Configuring an Aggregated Ethernet Interface
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
mtu
Syntax
mtu bytes;
Hierarchy Level
[edit interfaces interface-name],
[edit interfaces interface-name unit logical-unit-number family family],
[edit interfaces interface-range name],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family],
[edit logical-systems logical-system-name protocols l2circuit local-switching interface
interface-name backup-neighbor address],
[edit logical-systems logical-system-name protocols l2circuit neighbor address interface
interface-name],
[edit logical-systems logical-system-name protocols l2circuit neighbor address interface
interface-name backup-neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls neighbor address backup-neighbor address],
[edit protocols l2circuit local-switching interface interface-name backup-neighbor address],
[edit protocols l2circuit neighbor address interface interface-name]
[edit protocols l2circuit neighbor address interface interface-name backup-neighbor address],
[edit routing-instances routing-instance-name protocols vpls neighbor address
backup-neighbor address]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Support at the[set interfaces interface-name unit logical-unit-number family ccc] hierarchy
level introduced in Junos OS Release 12.3R3 for MX Series routers.
Description
Specify the maximum transmission unit (MTU) size for the media or protocol. The default
MTU size depends on the device type. Changing the media MTU or protocol MTU causes
an interface to be deleted and added again.
To route jumbo data packets on the routed VLAN interface (RVI) on EX Series switches,
you must configure the jumbo MTU size on the member physical interfaces and also on
the RVI itself (the vlan interface).
CAUTION: For EX Series switches, setting or deleting the jumbo MTU size on
the RVI (the vlan interface) while the switch is transmitting packets might
cause packets to be dropped.
NOTE: If a packet whose size is larger than the configured MTU size is received
on the receiving interface, the packet is eventually dropped. The value
considered for MRU (maximum receive unit) size is also the same as the MTU
size configured on that interface.
Copyright © 2013, Juniper Networks, Inc.
129
PTX Series Packet Transport Switch Software Documentation
NOTE: Not all devices allow you to set an MTU value, and some devices have
restrictions on the range of allowable MTU values. You cannot configure an
MTU for management Ethernet interfaces (fxp0, em0, or me0) or for
loopback, multilink, and multicast tunnel devices.
For more information about configuring MTU for specific interfaces and router or switch
combinations, see Configuring the Media MTU.
Options
bytes—MTU size.
Range: 256 through 9192 bytes, 256 through 9500 bytes (Junos OS 12.1X48R2 for PTX
Series systems)
Default: 1500 bytes (INET, INET6, and ISO families), 1448 bytes (MPLS), 1514 bytes (EX
Series switch interfaces)
Required Privilege
Level
Related
Documentation
130
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
•
Configuring Interfaces for Layer 2 Circuits
•
Configuring the Media MTU
•
Configuring Routed VLAN Interfaces (CLI Procedure)
•
Setting the Protocol MTU
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
name-format
Syntax
Hierarchy Level
Release Information
Description
Options
name-format (character-string | none | dns | mac+2oct);
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Specify the format of the maintenance domain name.
character-string—The name is an ASCII character string.
none—The maintenance domain name is not used.
dns—The name is in domain name service (DNS) format. For example: www.juniper.net.
mac+2oct—Name is the MAC address plus a two-octet maintenance association identifier.
For example: 08:00:22:33:44:55.100.
Default: character-string
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Creating a Maintenance Association
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
Copyright © 2013, Juniper Networks, Inc.
131
PTX Series Packet Transport Switch Software Documentation
oam
Syntax
132
oam {
ethernet {
connectivity-fault-management {
action-profile profile-name {
default-actions {
interface-down;
}
}
performance-monitoring {
delegate-server-processing;
hardware-assisted-timestamping;
sla-iterator-profiles {
profile-name {
disable;
calculation-weight {
delay delay-weight;
delay-variation delay-variation-weight;
}
cycle-time milliseconds;
iteration-period connections;
measurement-type (loss | statistical-frame-loss | two-way-delay);
}
}
}
linktrace {
age (30m | 10m | 1m | 30s | 10s);
path-database-size path-database-size;
}
maintenance-domain domain-name {
level number;
name-format (character-string | none | dns | mac+2octet);
maintenance-association ma-name {
short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id);
protect-maintenance-association protect-ma-name;
remote-maintenance-association remote-ma-name;
continuity-check {
convey-loss-threshold;
hold-interval minutes;
interface-status-tlv;
interval (10m | 10s | 1m | 1s| 100ms);
loss-threshold number;
port-status-tlv;
}
mep mep-id {
auto-discovery;
direction (up | down);
interface interface-name (protect | working);
lowest-priority-defect (all-defects | err-xcon | mac-rem-err-xcon | no-defect |
rem-err-xcon | xcon );
priority number;
remote-mep mep-id {
action-profile profile-name;
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
sla-iterator-profile profile-name {
data-tlv-size size;
iteration-count count-value;
priority priority-value;
}
}
}
}
}
}
link-fault-management {
action-profile profile-name {
action {
link-down;
send-critical-event;
syslog;
}
event {
link-adjacency-loss;
link-event-rate {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
protocol-down;
}
}
interface interface-name {
apply-action-profile
link-discovery (active | passive);
pdu-interval interval;
pdu-threshold threshold-value;
remote-loopback;
event-thresholds {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
negotiation-options {
allow-remote-loopback;
no-allow-link-events;
}
}
}
}
}
Hierarchy Level
Release Information
[edit protocols]
Statement introduced in Junos OS Release 8.2.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Copyright © 2013, Juniper Networks, Inc.
133
PTX Series Packet Transport Switch Software Documentation
Description
For Ethernet interfaces on M320, M120, MX Series, and T Series routers and PTX Series
Packet Transport Switches, provide IEEE 802.3ah Operation, Administration, and
Maitenance (OAM) support.
The remaining statements are explained separately.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
IEEE 802.3ah OAM Link-Fault Management Overview
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
protocol (Schedulers)
Syntax
Hierarchy Level
Release Information
Description
Options
protocol (any | non-tcp | tcp);
[edit class-of-service schedulers scheduler-name drop-profile-map]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Specify the protocol type for the specified scheduler.
any—Accept any protocol type.
non-tcp—(ACX Series Routers, M Series and T Series (except T4000) routers only)
Accept any protocol type other than TCP/IP.
NOTE: On ACX Series Routers, when you configure the non-tcp option, only
the any option is supported for loss-priority.
tcp—(ACX Series Routers, M Series and T Series (except T4000) routers only) Accept
TCP/IP protocol type.
Required Privilege
Level
Related
Documentation
134
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Schedulers
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
recovered-clock
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
recovered-clock {
port port-number;
}
[edit chassis fpc slot-number pic pic-number]
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
Select the port where the synchronous clock may be recovered.
port-number—Port number where the synchronous clock may be recovered.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Clock Sources for PTX Series Packet Transport Switches on page 27
•
Configuring an External Clock Synchronization Interface for PTX Series Packet Transport
Switches on page 30
•
synchronization on page 140
Copyright © 2013, Juniper Networks, Inc.
135
PTX Series Packet Transport Switch Software Documentation
sa-multicast (PTX Series Packet Transport Switches)
Syntax
Hierarchy Level
Release Information
Description
sa-multicast;
[edit chassis fpc slot pic slot port port-number forwarding-mode]
Statement introduced in Junos OS Release 12.1X48R4.
Configure source address (SA) multicast bit mode on the 100-Gigabit Ethernet PIC
P1-PTX-2-100GE-CFP to enable interoperability with 100-Gigabit Ethernet PIC
PD-1CE-CFP-FPC4.
NOTE: When SA multicast bit steering mode is configured on a PTX Series
Packet Transport Switch 100-Gigabit Ethernet port, VLANs are not supported
for that port.
Required Privilege
Level
Related
Documentation
136
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Interoperability Between the 100-Gigabit Ethernet PICs PD-1CE-CFP-FPC4 and
P1-PTX-2-100GE-CFP on page 37
•
Configuring the Interoperability Between the 100-Gigabit Ethernet PICs
P1-PTX-2-100GE-CFP and PD-1CE-CFP-FPC4 on page 38
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
short-name-format
Syntax
Hierarchy Level
Release Information
Description
Options
short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id);
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Specify the name format of the maintenance association name.
character-string—The name is an ASCII character string.
vlan—The primary VLAN identifier.
2octet—A number in the range 0 through 65,535.
rfc-2685-vpn-id—A VPN identifier that complies with RFC 2685.
Default: character-string
NOTE: The PTX Series Packet Transport Switches support the vlan and 2octet
options only.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Creating a Maintenance Association
•
Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 22
Copyright © 2013, Juniper Networks, Inc.
137
PTX Series Packet Transport Switch Software Documentation
source-address-filter
Syntax
Hierarchy Level
Release Information
source-address-filter {
mac-address;
}
[edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1 for PTX Packet Transport Switches.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Description
For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, Gigabit Ethernet IQ interfaces,
and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the
built-in Gigabit Ethernet port on the M7i router), specify the MAC addresses from which
the interface can receive packets. For this statement to have any effect, you must include
the source-filtering statement in the configuration to enable source address filtering. This
statement is not supported on the J Series Services Routers.
Options
mac-address—MAC address filter. You can specify the MAC address as nn:nn:nn:nn:nn:nn
or nnnn.nnnn.nnnn, where n is a decimal digit. To specify more than one address,
include multiple mac-address options in the source-address-filter statement.
If you enable the VRRP on a Fast Ethernet or Gigabit Ethernet interface, as described in
VRRP and VRRP for IPv6 Overview, and if you enable MAC source address filtering
on the interface, you must include the virtual MAC address in the list of source MAC
addresses that you specify in the source-address-filter statement. MAC addresses
ranging from 00:00:5e:00:01:00 through 00:00:5e:00:01:ff are reserved for VRRP,
as defined in RFC 3768, Virtual Router Redundancy Protocol. When you configure the
VRRP group, the group number must be the decimal equivalent of the last
hexadecimal byte of the virtual MAC address.
On untagged Gigabit Ethernet interfaces, you should not configure the source-address-filter
statement and the accept-source-mac statement simultaneously. On tagged Gigabit
Ethernet interfaces, you should not configure the source-address-filter statement
and the accept-source-mac statement with an identical MAC address specified in
both filters.
Required Privilege
Level
Related
Documentation
138
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Enabling Ethernet MAC Address Filtering
•
Configuring MAC Filtering on PTX Series Packet Transport Switches on page 17
•
source-filtering on page 139
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
source-filtering
Syntax
Hierarchy Level
Release Information
Description
(source-filtering | no-source-filtering);
[edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1 for PTX Packet Transport Switches.
For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and Gigabit Ethernet IQ
interfaces only, enable the filtering of MAC source addresses, which blocks all incoming
packets to that interface. To allow the interface to receive packets from specific MAC
addresses, include the source-address-filter statement.
If the remote Ethernet card is changed, the interface is no longer able to receive packets
from the new card because it has a different MAC address.
Default
Required Privilege
Level
Related
Documentation
Source address filtering is disabled.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Enabling Ethernet MAC Address Filtering
•
Configuring MAC Filtering on PTX Series Packet Transport Switches on page 17
•
accept-source-mac on page 108
•
source-address-filter on page 138
Copyright © 2013, Juniper Networks, Inc.
139
PTX Series Packet Transport Switch Software Documentation
synchronization (M Series, T Series, and PTX Series)
Syntax
Hierarchy Level
Release Information
Description
Options
synchronization {
primary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz |
gps-1-10mhz | gps-1-5mhz | bits-a | bits-b);
secondary (external-a | external-b | fpc-slot-number | gps-0-10mhz | gps-0-5mhz |
gps-1-10mhz | gps-1-5mhz | bits-a | bits-b );
signal-type (t1 | e1);
switching-mode (revertive | non-revertive);
transmitter-enable;
validation-interval seconds;
y-cable-line-termination;
}
[edit chassis]
Statement introduced in Junos OS Release 7.6.
Statement introduced in Junos OS Release 9.3 for M120 routers.
Statement introduced in Junos OS Release 10.2 for T320, T640, and T1600 routers.
Statement introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
(M320, M40e, M120, T320, T640, and T1600 routers and PTX Series Packet Transport
Switches only) Configure an external synchronization interface to synchronize the internal
Stratum 3 clock to an external source, and then synchronize the chassis interface clock
to that source.
primary—First external timing source specified in the configuration hierarchy. This
statement has the following suboptions:
•
external-a—Use external-a as the primary clock synchronization source.
•
external-b—Use external-b as the primary clock synchronization source.
•
fpc-slot-number—Use fpc-slot-number as the primary clock synchronization source.
For the PTX5000 Packet Transport Switch, replace slot-number with a value from 0
through 7.
•
gps-0-10mhz—Use gps-0-10mhz as the primary clock synchronization source.
•
gps-0-5mhz—Use gps-0-5mhz as the primary clock synchronization source.
•
gps-1-10mhz—Use gps-1-10mhz as the primary clock synchronization source.
•
gps-1-5mhz—Use gps-1-5mhz as the primary clock synchronization source.
•
bits-a—Use bits-a as the primary clock synchronization source.
•
bits-b—Use bits-b as the primary clock synchronization source.
secondary—Second external timing source specified in the configuration hierarchy.
140
•
external-a—Use external-a as the secondary clock synchronization source.
•
external-b—Use external-b as the secondary clock synchronization source.
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
•
fpc-slot-number—Use fpc-slot-number as the secondary clock synchronization source.
For the PTX5000 Packet Transport Switch, replace slot-number with a value from 0
to 7.
•
gps-0-10mhz—Usegps-0-10mhz as the secondary clock synchronization source.
•
gps-0-5mhz—Use gps-0-5mhz as the secondary clock synchronization source.
•
gps-1-10mhz—Use gps-1-10mhz as the secondary clock synchronization source.
•
gps-1-5mhz—Use gps-1-5mhz as the secondary clock synchronization source.
•
bits-a—Use bits-a as the secondary clock synchronization source.
•
bits-b—Use bits-b as the secondary clock synchronization source.
signal-type—Specify the line encoding mode for interfaces: either t1 or e1. For the M40e
router, only the t1 signal-type mode is supported.
Default: t1
switching-mode—Specify revertive if a lower-priority synchronization can be switched to
a valid, higher-priority synchronization.
Default: non-revertive
transmitter-enable—(M320 routers only) Control whether the diagnostic timing signal is
transmitted.
validation-interval—Validate the synchronized deviation. If revertive switching is enabled
and a higher-priority clock is validated, the clock module is directed to the
higher-priority clock, and all configured and active synchronizations are validated.
The validation timer resumes after the current validation interval expires. This feature
is not supported on PTX Series Packet Transport Switches.
Range: (M320, M40e, T320, T640, T1600 routers) 90 through 86,400 seconds. (M120
routers) 30 through 86,400 seconds.
Default: (M320, M40e, T320, T640, T1600 routers) 90 seconds. (M120 routers) 30
seconds
y-cable-line-termination—(M320 routers only) Specify that a single signal be wired to
both Control Boards (CBs) using a Y-cable.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring the Junos OS to Support an External Clock Synchronization Interface for M
Series and T Series Routers
Copyright © 2013, Juniper Networks, Inc.
141
PTX Series Packet Transport Switch Software Documentation
vlan-tags (Stacked VLAN Tags)
Syntax
vlan-tags inner tpid.vlan-id inner-range vid1—vid2 outer tpid.vlan-id;
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Description
For Gigabit Ethernet IQ and IQE interfaces only, bind TPIDs and 802.1Q VLAN tag IDs to
a logical interface.
NOTE: The inner-range vid1–vid2 option is supported on MX Series with IQE
PICs only.
Options
inner tpid.vlan-id—A TPID and a valid VLAN identifier.
Range: (most routers) For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging
the priority of frames.
Range: (PTX Series) For VLAN ID, 0 through 4094.
inner-range vid1–vid2—For MX Series routers with Enhanced IQ (IQE) PICs only; specify
a range of VLAN IDs where vid1 is the start of the range and vid2 is the end of the
range.
Range: For VLAN ID, 1 through 4094. VLAN ID 0 is reserved for tagging the priority of
frames.
outer tpid.vlan-id—A TPID and a valid VLAN identifier.
Range: (most routers) For VLAN ID, 1 through 511 for normal interfaces, and 512 through
4094 for VLAN CCC interfaces. VLAN ID 0 is reserved for tagging the priority of
frames.
Range: (PTX Series) For VLAN ID, 0 through 511 for normal interfaces, and 512 through
4094 for VLAN CCC interfaces.
NOTE: Configuring inner-range with the entire vlan-id range consumes system
resources and is not a best practice. It should be used only when a subset of
VLAN IDs of inner tag (not the entire range) needs to be associated with a
logical interface. If you specify the entire range (1–4094), it has the same
result as not specifying a range; however, it consumes Packet Forwarding
Engine resources such as VLAN lookup table entries, and so on.
The following examples illustrate this further:
[edit interfaces
142
interface-name]
Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Configuration Statements
stacked-vlan-tagging;
unit number {
vlan-tags outer vid inner-range 1-4094;
}
[edit interfaces interface-name]
vlan-tagging;
unit number {
vlan-id vid;
}
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
•
Configuring Dual VLAN Tags
•
Configuring Flexible VLAN Tagging on PTX Series Packet Transport Switches on page 18
•
stacked-vlan-tagging
Copyright © 2013, Juniper Networks, Inc.
143
PTX Series Packet Transport Switch Software Documentation
144
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 12
Differences Between PTX Series and T
Series
•
COS Feature Differences Between PTX Series Packet Transport Switches and T Series
Matrix Routers on page 145
•
Firewall and Policing Differences Between PTX Series Packet Transport Switches and
T Series Matrix Routers on page 147
COS Feature Differences Between PTX Series Packet Transport Switches and T Series
Matrix Routers
This topic provides a list of Class of Service features available on PTX Packet Transport
Switches and compares them with Class of Service features on T Series routers.
Classifiers
•
T Series routers support VRF table labels for Layer 3 VPNs. On PTX Series Packet
Transport Switches, this feature is not supported.
•
On T Series routers, IEEE 802.1 classifiers cannot co-exist with Layer 3 classifiers. On
PTX Series Packet Transport Switches, these classifiers can co-exist.
•
On T Series routers, IEEE classifiers are supported by using intelligent PICs. These PICs
have the flexibility of classifying traffic based on inner or outer VLAN tags. On PTX
Series Packet Transport Switches, IEEE classification is always based on outer VLAN
tags.
Rewrite
•
•
PTX Series Packet Transport Switches do not support rewrite of both exp and
inet-precedence fields using:
•
exp protocol mpls-any
•
exp protocol mpls-inet-both
•
exp protocol mpls-inet-both-non-vpn
PTX Series Packet Transport Switches support rewrite of both dscp and dscp-ipv6 .
On T Series routers, the dscp and dscp-ipv6 rewrite feature is not supported.
Copyright © 2013, Juniper Networks, Inc.
145
PTX Series Packet Transport Switch Software Documentation
•
PTX Series Packet Transport Switches also support layer 2 rewrite of 802.1p and
802.1ad, to either the outer vlan tag, or both outer and inner vlan tags.
Forwarding Class
•
On T Series routers, you can override the default fabric priority queuing of egress traffic
by including the priority statement at the following hierarchy level: .
[class-of-service forwarding-classes queue queue-number class-name]
priority (high |low);
On the PTX Series Packet Transport Switch, fabric priority queuing is not supported;
therefore, the priority statement for forwarding-classes is not supported.
Tri-color Marking
•
On T Series routers, the copy-plp-all statement needs to be configured to support
tricolor marking. On the PTX Series Packet Transport Switches, tricolor marking is
enabled by default.
Schedulers
146
•
T Series routers, which use egress queuing architecture, support chassis and fabric
schedulers. Alternatively, PTX Series Packet Transport Switches support a Virtual
Output Queuing (VOQ) architecture that does not require fabric schedulers. With the
VOQ architecture, packets are queued and dropped in the ingress during congestion.
•
On T Series routers, high priority queues have precedence to acquire excess bandwidth
and may consume all excess bandwidth. On PTX Series Packet Transport Switches,
excess bandwidth is shared based on the ratio of configured transfer rate. Therefore,
all priority queues get a share of excess bandwidth.
•
On T Series routers, strict-high priority queues and high priority queues are assigned
the same hardware priority. On PTX Series Packet Transport Switches, strict-high
priority queues and high priority queues are assigned different hardware priorities.
•
On T Series routers, if a strict-high priority queue is oversubscribed, it can block all other
queues except high priority queues. On PTX Series Packet Transport Switches, if a
strict-high priority queue is oversubscribed, it can block all other queues including high
priority queues.
•
To restrict the bandwidth of strict-high priority queues, the transmit-rate rate-limit
configuration statement has been implemented for PTX Series Packet Transport
Switches.
•
On both T Series routers and PTX Series Packet Transport Switches, if a strict-high
priority queue is oversubscribed and results in oversubscription of the guaranteed
bandwidth, the distribution of bandwidth that is not taken up by strict-high priority
queues is undetermined. T Series routers and PTX Series Packet Transport Switches
differently when distributing this unused bandwidth.
Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Differences Between PTX Series and T Series
Buffer Size and Latency
•
On T Series routers, memory allocation dynamic (MAD) is enabled by default and can
be disabled. On PTX Series Packet Transport Switches, MAD cannot be disabled.
•
On T Series routers, the maximum delay bandwidth buffering configured per queue is
50 MS. On the PTX, the maximum delay bandwidth buffering configured per queue is
100 MS.
•
On T Series routers, the maximum latency associated with a packet is fairly consistent
and independent of the number of sources sending the traffic to an interface. On the
PTX Series Packet Transport Switch, over-provisioning is possible. When traffic is sent
from multiple Packet Forwarding Engines, the latency is about 10%-15% higher than
when traffic is sent from one Packet Forwarding Engine.
•
On T Series routers, a high priority queue has lower latency than a low priority queue
with the same configured transfer rate and same offered load. On PTX Series Packet
Transport Switches, there is no latency difference.
Drop Profile
•
The Queuing and Memory Interfaces ASIC does not support drop-profile assignments
for a queue based on the protocol. As a consequence, the protocol option for the
drop-profile-map configuration statement is treated as protocol any.
Interface Queue Statistics (show interfaces queue output)
Related
Documentation
•
On T Series routers, transmitted byte counters are computed using Layer 3 packet
length. On PTX Series Packet Transport Switches, transmitted byte counters are
computed using Layer 2 packet length (excluding CRC).
•
On the PTX Series Packet Transport Switches, tail-dropped counters are always zero.
All the packet drops will be shown as random early detection (RED-dropped) in the
output for the show interfaces queue CLI command.
•
On T Series routers, the Tail-dropped counters and the RED-dropped counters are
displayed separately in the output.
•
Understanding CoS CLI Configuration Statements on PTX Series Packet Transport
Switches on page 53
Firewall and Policing Differences Between PTX Series Packet Transport Switches and
T Series Matrix Routers
This topic provides a list of firewall and policier features available on PTX Packet Transport
Switches and compares them with firewall and policing features on T Series routers.
Copyright © 2013, Juniper Networks, Inc.
147
PTX Series Packet Transport Switch Software Documentation
Firewall Filters
Junos OS firewall and policing software on PTX Series Packet Transport Switches supports
IPv4 filters, IPv6 filters, MPLS filters, CCC filters, interface policing, LSP policing, MAC
filtering, ARP policing, L2 policing, and other features. Exceptions are noted below.
•
148
PTX Series Packet Transport Switches do not support:
•
Filter Based Forwarding
•
Egress Forwarding Table Filters
•
Forwarding Table Filters for MPLS/CCC
•
Family VPLS
•
PTX Series Packet Transport Switches do not support nested firewall filters. The filter
statement at the [edit firewall family family-name filter filter-name term term-name]
hierarchy level is disabled.
•
Because no service PICs are present in PTX Series Packet Transport Switches, service
filters are not supported for both IPv4 and IPv6 traffic. The service-filter statement at
[edit firewall family (inet | inet6)] hierarchy level is disabled.
•
The PTX Series Packet Transport Switches exclude simple filters. These filters are
supported on Gigabit Ethernet intelligent queuing (IQ2) and Enhanced Queuing Dense
Port Concentrator (EQ DPC) interfaces only. The simple-filter statement at the [edit
firewall family inet)] hierarchy level is disabled.
•
Physical interface filtering is not supported. The physical-interface-filter statement at
the [edit firewall family family-name filter filter-name] hierarchy level is disabled.
•
The prefix action feature is not supported on PTX Series Packet Transport Switches.
The prefix-action statement at [edit firewall family inet] hierarchy level is disabled.
•
On T Series routers, you can collect a variety of information about traffic passing
through the device by setting up one or more accounting profiles that specify some
common characteristics of the data. The PTX Series Packet Transport Switches do
not support accounting configurations for firewall filters. The accounting-profile
statement at the [edit firewall family family-name filter filter-name] hierarchy level is
disabled.
•
The reject action is not supported on the loopback (lo0) interface. If you apply a filter
to the lo0 interface and the filter includes a reject action, an error message appears.
•
PTX Series Packet Transport Switches do not support aggregated ethernet logical
interface match conditions. However, child link interface matching is supported.
•
PTX Series Packet Transport Switches displays both counts if two different terms in
a filter have the same match condition but they have different counts. T Series routers
display one count only.
•
PTX Series Packet Transport Switches do not have separate policer instances when
a filter is bound to multiple interfaces. Use the interface-specific configuration statement
to create the configuration.
Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Differences Between PTX Series and T Series
•
On PTX Series Packet Transport Switches, when an ingress interface has CCC
encapsulation, packets coming in through the ingress CCC interface will not be
processed by the egress filters.
•
For CCC encapsulation, the PTX Series Packet Transport Switches append an extra 8
bytes for egress Layer 2 filtering. The T Series routers do not. Therefore, egress counters
on PTX Series Packet Transport Switches show an extra eight bytes for each packet
which impacts policer accuracy.
•
On PTX Series Packet Transport Switches, output for the show pfe statistics traffic CLI
command includes the packets discarded by DMAC and SMAC filtering. On T Series
routers, the command output does not include these discarded packets because MAC
filters are implemented in the PIC and not in the FPC.
•
The last-fragment packet that goes through a PTX firewall cannot be matched by the
is-fragment matching condition. This feature is supported on T Series routers.
A possible workaround on PTX Series Packet Transport Switches is to configure two
separate terms with same the actions: one term contains a match to is-fragment and
the other term contains a match to fragment-offset -except 0.
•
On PTX Series Packet Transport Switches, MAC pause frames are generated when
packet discards exceed 100 Mbps. This occurs only for frame sizes that are less than
105 bytes.
Traffic Policiers
Junos OS firewall and policing software on PTX Series Packet Transport Switches supports
IPv4 filters, IPv6 filters, MPLS filters, CCC filters, interface policing, LSP policing, MAC
filtering, ARP policing, L2 policing, and other features. Exceptions are noted below.
•
PTX Series Packet Transport Switches support ARP policing. T Series routers do not.
•
PTX Series Packet Transport Switches do not support LSP policing.
•
PTX Series Packet Transport Switches do not support the hierarchical-policer
configuration statement. .
•
PTX Series Packet Transport Switches do not support the interface-set configuration
statement. This statement groups a number of interfaces into a single, named interface
set.
•
PTX Series Packet Transport Switches do not support the following policer types for
both normal policers and three-color policers:
•
•
logical-bandwidth-policer — Policer uses logical interface bandwidth.
•
physical-interface-policer — Policer is a physical interface policer.
•
shared-bandwidth-policer — Share policer bandwidth among bundle links.
When a policer action and forwarding-class, loss-priority actions are configured within
the same rule (a Multifield Classification), the PTX Series Packet Transport Switches
work differently than T Series routers. As shown below, you can configure two rules in
the filter to make the PTX filter behave the same as the T Series filter:
PTX Series configuration:
Copyright © 2013, Juniper Networks, Inc.
149
PTX Series Packet Transport Switch Software Documentation
rule-1 {
match: {x, y, z}
action: {forwarding-class, loss-prio, next}
}
rule-2 {
match: {x, y, z}
action: {policer}
}
T Series configuration:
rule-1 {
match: {x, y, z}
action: {forwarding-class, loss-prio, policer}
}
Related
Documentation
150
•
Junos OS Firewall Filters and Traffic Policers Configuration Guide
Copyright © 2013, Juniper Networks, Inc.
PART 3
Administration
•
Managing PTX Series Packet Transport Switches on page 153
•
Managing the Boot Sequence on page 163
•
Monitoring Commands for PTX Series Packet Transport Switches on page 167
Copyright © 2013, Juniper Networks, Inc.
151
PTX Series Packet Transport Switch Software Documentation
152
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 13
Managing PTX Series Packet Transport
Switches
Copyright © 2013, Juniper Networks, Inc.
153
PTX Series Packet Transport Switch Software Documentation
request chassis ccg
Syntax
Release Information
Description
Options
request chassis ccg (offline | online) slot slot-number
Command introduced in Junos OS 12.1 for the PTX Series Packet Transport Switches.
(PTX Series Packet Transport Switches) Control the operation of the Centralized Clock
Generator (CCG).
offline—Take the CCG offline.
online—Bring the CCG online.
slot slot-number—CCG slot number. Replace slot-number with a value from 0 through 1.
Required Privilege
Level
List of Sample Output
Output Fields
maintenance
request chassis ccg on page 154
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis ccg
user@host> request chassis ccg offline slot 1
CCG 1 is offline, Backup CCG 0 is now online.
154
Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Managing PTX Series Packet Transport Switches
request chassis clock master switch
Syntax
Release Information
Description
Options
Additional Information
request chassis clock master switch
Command introduced in Junos OS Release 12.1.
(PTX Series Packet Transport Switches only) Control which Centralized Clock Generator
(CCG) is the master.
This command has no options.
By default, the CCG in slot 0 (CCG0) is the master and the CCG in slot 1 (CCG1) is the
backup. If you use this command to change the master, and then restart the chassis
software for any reason, the master reverts to the default setting. To change the default
master CCG, include the ccg statement at the [edit chassis redundancy] hierarchy level
in the configuration. For more information, see the Junos OS System Basics Configuration
Guide.
The configurations on the two CCGs do not have to be the same, and they are not
automatically synchronized. If you configure both CCGs as masters, when the chassis
software restarts for any reason, the CCG in slot 0 becomes the master and the one in
slot 1 becomes the backup.
The switchover from the primary CCG to the backup CCG is immediate.
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
maintenance
•
show chassis environment on page 179
request chassis clock master switch on page 155
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis clock master switch
user@host> request chassis clock master switch
CCG master switch initiated, use “show chassis environment ccg” to verify
Copyright © 2013, Juniper Networks, Inc.
155
PTX Series Packet Transport Switch Software Documentation
request chassis fpc
Syntax
request chassis fpc (offline | online | restart) slot slot-number
Syntax (TX Matrix and
TX Matrix Plus
Routers)
request chassis fpc (offline | online | restart) slot slot-number
<lcc number>
Syntax (MX Series
Routers)
request chassis fpc (offline | online | restart) slot slot-number
<all-members>
<local>
<member member-id>
Syntax (MX2020 3D
Universal Edge
Routers)
request chassis fpc (offline | online | restart) slot slot-number
Syntax (MX2010 3D
Universal Edge
Routers)
request chassis fpc (offline | online | restart) slot slot-number
Syntax (QFabric
System)
Syntax (PTX Series
Packet Transport
Switches)
request chassis fpc
<interconnect-device name slot slot-number (offline | online)>
<(offline | online) interconnect-device name slot slot-number>
<slot slot-number interconnect-device name (offline | online)>
request chassis fpc (offline | online | restart) slot slot-number
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS 11.3 for QFX Series.
Command introduced in Junos OS 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M20, M40, M40e, M120, M160, M320, MX Series, and T Series routers, QFabric systems,
EX Series switches, and PTX Series Packet Transport Switches only) Control the operation
of the Flexible PIC Concentrator (FPC). For information about the meaning of “FPCs” on
the switches, see EX Series Switches Hardware and CLI Terminology Mapping.
Options
offline—Take the FPC offline.
online—Bring the FPC online.
interconnect-device name—(QFabric systems only) Bring the Flexible Port Concentrator
(FPC) on the QFX3008-I Interconnect device either offline or online:
156
Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Managing PTX Series Packet Transport Switches
•
(QFabric System) On a QFabric system, specify the name of the QFX3008-I
Interconnect device containing the Flexible Port Concentrator (FPC) you want to
bring either offline or online.
restart—Restart the FPC.
slot slot-number—FPC slot number:
•
M20 router—0 through 3.
•
M120 router—0 through 5.
•
MX240 router—0 through 2. On the MX240 router, slot-number corresponds to
the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number
corresponds to the MPC slot number.
•
MX480 router—0 through 5. On the MX480 router, slot-number corresponds to
the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number
corresponds to the MPC slot number.
•
MX960 router—0 through 11. On the MX960 router, slot-number corresponds to
the Dense Port Concentrator (DPC) slot number. If an MPC is installed, slot-number
corresponds to the MPC slot number.
•
MX2020 router—0 through 19.
•
MX2010 router—0 through 9.
•
TX Matrix and TX Matrix Plus routers only—On the TX Matrix router, if you specify
the number of the T640 router by using the lcc number option (the recommended
method), replace slot-number with a value from 0 through 7. Otherwise, replace
slot-number with a value from 0 through 31.
Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 router
by using the lcc number option (the recommended method), replace slot-number
with a value from 0 through 7. Otherwise, replace slot-number with a value from
0 through 31. For example, the following commands have the same result:
user@host> request chassis fpc lcc 1 slot 1 offline
user@host> request chassis fpc slot 9 offline
•
Other routers—0 through 7.
•
QFabric System—Replace slot-number with a value from 0 through 2.
•
EX Series switches:
•
EX4200 switches in a Virtual Chassis configuration—Replace slot-number with
a value from 0 through 9.
•
EX6210 switches—Replace slot-number with a value from 0 through 9.
NOTE: These commands are not supported for slots 4 and 5 when
a Switch Fabric and Routing Engine (SRE) module is installed in
those slots. These commands are supported for slots 4 and 5 only
if a line card is installed in them.
Copyright © 2013, Juniper Networks, Inc.
157
PTX Series Packet Transport Switch Software Documentation
•
•
EX8208 switches—Replace slot-number with a value from 0 through 7.
•
EX8216 switches—Replace slot-number with a value from 0 through 15.
PTX5000 Packet Transport Switch—Replace slot-number with a value from 0
through 7.
all-members—(MX Series routers only) (Optional) Change FPC status of all members of
the Virtual Chassis configuration.
local—(MX Series routers only) (Optional) Change FPC status of the local Virtual Chassis
member.
member member-id—(MX Series routers only) (Optional) Change FPC status of the
specified member of the Virtual Chassis configuration. Replace member-id with a
value of 0 or 1.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
control the FPC in a specified T640 router that is connected to the TX Matrix router.
On a TX Matrix Plus router, control the FPC in a specified T1600 router that is
connected to the TX Matrix Plus router. Replace number with a value from 0 through
3.
Required Privilege
Level
Related
Documentation
maintenance
•
show chassis fpc on page 442
•
show chassis fpc-feb-connectivity
•
show chassis fabric fpcs on page 373
•
Configuring the Junos OS to Make a Flexible PIC Concentrator Stay Offline
•
Configuring the Junos OS to Resynchronize FPC Sequence Numbers with Active FPCs
when an FPC Comes Online
•
MX960 Flexible PIC Concentrator Description
List of Sample Output
request chassis fpc on page 158
request chassis fpc (MX Series Routers with Media Services Blade [MSB]) on page 159
request chassis fpc (MX2020 Router) on page 159
request chassis fpc (MX2010 Router) on page 159
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis fpc
user@host> request chassis fpc online slot 0
FPC 0 already online
158
Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Managing PTX Series Packet Transport Switches
request chassis fpc (MX Series Routers with Media Services Blade [MSB])
user@host> request chassis fpc slot 0
Possible completions:
offline
Take FPC offline
online
Bring FPC online
restart
Restart FPC
request chassis fpc (MX2020 Router)
user@host >request chassis fpc online slot 2
FPC 2 already online
request chassis fpc (MX2010 Router)
user@host >request chassis fpc offline slot 5
Offline initiated, use "show chassis fpc" to verify
Copyright © 2013, Juniper Networks, Inc.
159
PTX Series Packet Transport Switch Software Documentation
request chassis synchronization switch
Syntax
Syntax (M Series, T
Series)
request chassis synchronization switch
request chassis synchronization switch (external-a | external-b)
Syntax (PTX Series)
request chassis synchronization switch (bits-a | bits-b | fpc-slot-number | gps-0-10mhz |
gps-0-5mhz | gps-1-10mhz | gps-1-5mhz)
Release Information
Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 8.3 for M40e routers.
Command introduced in Junos OS Release 9.3 for M120 routers.
Command introduced in Junos OS Release 10.2 for T320, T640, and T1600 routers.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Description
(M320, M40e, M120, T320, T640, and T1600 routers and PTX Packet Transport Switches
only) Change the external clock source used for chassis synchronization.
Options
external-a—(Routing matrix only) Change the synchronization source to external source
A.
external-b—(Routing matrix only) Change the synchronization source to external source
B.
bits-a—(PTX Series only) Change the synchronization source to the BITS external source
A.
bits-b—(PTX Series only) Change the synchronization source to the BITS external source
B.
fpc-slot-number—(PTX Series only) Change the synchronization source to an FPC in the
slot specified. For the PTX5000 Packet Transport Switch, replace slot-number with
a value from 0 through7.
gps-0-10mhz—(PTX Series only) Change the synchronization source to the 10 MHz GPS
source on CCG port 0.
gps-0-5mhz—(PTX Series only) Change the synchronization source to the 5 MHz GPS
source on CCG port 0.
gps-1-10mhz—(PTX Series only) Change the synchronization source to the 10 MHz GPS
source on CCG port 1.
gps-1-5mhz—(PTX Series only) Change the synchronization source to the 5 Hz GPS source
on CCG port 1.
Required Privilege
Level
160
maintenance
Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Managing PTX Series Packet Transport Switches
Related
Documentation
List of Sample Output
Output Fields
•
show chassis synchronization on page 619
•
Configuring Clock Synchronization Interface for MX Series Routers
•
Supported Time Synchronization Standard
request chassis synchronization switch (M Series, T Series) on page 161
request chassis synchronization switch (PTX Series) on page 161
When you enter this command, you are provided feedback on the status of your request.
Not configured indicates that the source is not configured. Present indicates that the
source is configured and present. Qualified indicates that the source is being used for
synchronization.
Sample Output
request chassis synchronization switch (M Series, T Series)
user@host> request chassis synchronization switch external-a
switching to external-a, status: qualified
request chassis synchronization switch (PTX Series)
user@host> request chassis synchronization switch fpc-2
switching to fpc-2, status: qualified
Copyright © 2013, Juniper Networks, Inc.
161
PTX Series Packet Transport Switch Software Documentation
162
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 14
Managing the Boot Sequence
•
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and PTX
Series Routing Engines ) on page 163
Boot Sequence (M Series, MX Series, T Series, TX Matrix, TX Matrix Plus, and PTX
Series Routing Engines )
NOTE: For information about which Routing Engines are supported by each
device, see http://www.juniper.net/techpubs/en_US/release-independent/
junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html.
The M Series, MX Series (except for the MX80 routers), T Series, and TX Matrix routers
with a Routing Engine that has a hard disk attempt to boot from the storage media in
the following order:
1.
Removable media emergency boot device, such as a PC Card (if present)
2. CompactFlash card (if present)
3. Hard disk
The M Series and MX Series with a Routing Engine that has a solid-state drive (SSD)
attempt to boot from the storage media in the following order:
1.
USB media emergency boot device (if present)
2. CompactFlash card
3. Solid-state drive (SSD) in the SSD slot 1 or SSD slot 2 (if present)
MX80 routers attempt to boot from the storage media in the following order:
1.
USB media emergency boot device
2. Dual, internal NAND flash device (first da0, then da1)
The T series routers with a Routing Engine that has a solid-state drive (SSD) and TX
Matrix Plus routers attempt to boot from the storage media in the following order:
Copyright © 2013, Juniper Networks, Inc.
163
PTX Series Packet Transport Switch Software Documentation
1.
USB media emergency boot device
2. CompactFlash card (if present)
3. Solid-state drive (SSD) in the Disk 1 slot (if present)
NOTE: The Disk 2 slot is not currently supported.
4. Storage media available on the LAN
The PTX Series Packet Transport Switches attempt to boot from the storage media in
the following order:
1.
USB media emergency boot device
2. CompactFlash card
3. Solid-state drive (SSD) in the Disk 1 slot (if present)
4. Storage media available on the LAN
NOTE: Do not insert an emergency boot device during normal operations.
The router does not operate normally when it is booted from an emergency
boot device.
If the router boots from an alternate boot device, Junos OS displays a message indicating
this when you log in to the router. For example, the following message shows that the
software booted from the hard disk (/dev/ad1s1a):
login: username
Password: password
Last login: date on terminal
--- Junos 8.0 R1 built date
----- NOTICE: System is running on alternate media device (/dev/ad2s1a).
This situation results when the router detects a problem with the primary boot
device—usually the CompactFlash card—that prevents it from booting, and consequently
boots from the alternate boot device (the hard disk drive). When this happens, the primary
boot device is removed from the list of candidate boot devices. The problem is usually
a serious hardware error. We recommend you contact the Juniper Networks Technical
Assistance Center (JTAC).
When the router boots from the alternate boot device, the software and configuration
are only as current as the most recent request system snapshot command. However, if
the mirror-flash-on-disk command was enabled, then the hard disk drive contains a
synchronized, mirror image of the compact flash drive and therefore the current software
and configuration.
164
Copyright © 2013, Juniper Networks, Inc.
Chapter 14: Managing the Boot Sequence
Related
Documentation
•
Routing Engine Specifications
Copyright © 2013, Juniper Networks, Inc.
165
PTX Series Packet Transport Switch Software Documentation
166
Copyright © 2013, Juniper Networks, Inc.
CHAPTER 15
Monitoring Commands for PTX Series
Packet Transport Switches
Copyright © 2013, Juniper Networks, Inc.
167
PTX Series Packet Transport Switch Software Documentation
show chassis alarms
Syntax
show chassis alarms
Syntax (TX Matrix
Routers)
show chassis alarms
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
Syntax (MX Series
Routers)
show chassis alarms
<lcc number | sfc number>
show chassis alarms
<all-members>
<local>
<member member-id>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis alarms
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis alarms
Syntax (QFX Series)
show chassis alarms
<interconnect-device name>
<node-device name>
Syntax (PTX Series
Packet Transport
Switches)
show chassis alarms
Syntax (ACX Series
Universal Access
Routers)
show chassis alarms
Release Information
Description
Options
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option for the TX Matrix Plus router introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 12.1 for the PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Display information about the conditions that have been configured to trigger alarms.
none—Display information about the conditions that have been configured to trigger
alarms.
168
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
all-members—(MX Series routers only) (Optional) Display information about alarm
conditions for all the member routers of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display information about
alarm conditions for the Interconnect device.
lcc number — (TX Matrix and TX Matrix Plus routers only) (Optional) On the TX Matrix
router, show information about a specified T640 router (or line-card chassis) that
is connected to the TX Matrix router. On the TX Matrix Plus router, show information
about a specified T1600 router (or line-card chassis) that is connected to the TX
Matrix Plus router. Replace number with a value from 0 through 3.
local—(MX Series routers only) (Optional) Display information about alarm conditions
for the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display information about alarm
conditions for the specified member of the Virtual Chassis configuration. Replace
member-id with a value of 0 or 1.
node-device name—(QFabric systems only) (Optional) Display information about alarm
conditions for the Node device.
scc—(TX Matrix router only) (Optional) Show information about the TX Matrix router (or
switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Show information about the TX
Matrix Plus router (or switch-fabric chassis). Replace number with 0.
Additional Information
You cannot clear the alarms for chassis components. Instead, you must remedy the
cause of the alarm. When a chassis alarm is lit, it indicates that you are running the router
or switch in a manner that we do not recommend.
On routers, you can manually silence external devices connected to the alarm relay
contacts by pressing the alarm cutoff button, located on the craft interface. Silencing
the device does not remove the alarm messages from the display (if present on the
router) or extinguish the alarm LEDs. In addition, new alarms that occur after you silence
an external device reactivate the external device.
In Junos OS release 11.1 and later, alarms for fans also show the slot number of the fans
in the CLI output.
In Junos OS Release 11.2 and later, the command output on EX8200 switches shows the
detailed location (Plane/FPC/PFE) for link errors in the chassis.
In Junos OS Release 10.2 and later, an alarm is shown on T Series routers for a standby
sonic clock generator (SCG) that is offline or absent.
You may often see the following error messages, in which only the error code is shown
and no other information is provided:
Apr 12 08:04:10 send: red alarm set, device FPC 6, reason FPC 6 Major Errors - Error code:
257
Copyright © 2013, Juniper Networks, Inc.
169
PTX Series Packet Transport Switch Software Documentation
Apr 12 08:04:19 send: red alarm set, device FPC 1, reason FPC 1 Major Errors - Error code:
559
To understand what CM_ALARM error codes mean, you need to first identify the structure
of the CM Alarm codes. A CM_ALARM code has the following structure:
Bits:
Error type:
1-31
Major (1)
0
Minor (0)
As per the above table, the LSB (bit 0) identifies the Error Type (major alarm, if the bit
is set and minor alarm if the bit is unset). The rest of the bits (1 - 31) identify the actual
error code.
Take an example of the following error code, which was logged on a T1600:
Apr 12 08:04:10 send: red alarm set, device FPC 1, reason FPC 1 Major Errors - Error code:
559
First, you have to convert 559 to binary; that is 1000101111. The LSB in this case is 1, which
means that this is a major alarm. After removing the LSB, you are left with 100010111,
which is equal to 279 in decimal. This is the actual error code, its meaning can be found
from the following list:
Chip Type: L Chip
Code
CMALARM_LCHIP_LOUT_DESRD_PARITY_ERR
1
CMALARM_LCHIP_LOUT_DESRD_UNINIT_ERR
2
CMALARM_LCHIP_LOUT_DESRD_ILLEGALLINK_ERR
3
CMALARM_LCHIP_LOUT_DESRD_ILLEGALSIZE_ERR
4
CMALARM_LCHIP_LOUT_HDRF_TOERR_ERR
5
CMALARM_LCHIP_LOUT_HDRF_PARITY_ERR
6
CMALARM_LCHIP_LOUT_HDRF_UCERR_ERR
7
CMALARM_LCHIP_LOUT_NLIF_CRCDROP_ERR
8
CMALARM_LCHIP_LOUT_NLIF_CRCERR_ERR
9
CMALARM_LCHIP_UCODE_TIMEOUT_ERR
10
CMALARM_LCHIP_LIN_SRCTL_ACCT_DROP_ERR
11
CMALARM_LCHIP_LIN_SRCTL_ACCT_ADDR_SIZE_ERR
12
170
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CMALARM_LCHIP_SRAM_PARITY_ERR
13
CMALARM_LCHIP_UCODE_OVFLW_ERR
14
CMALARM_LCHIP_LOUT_HDRF_MTU_ERR
15
Chip Type: M Chip
Code
CMALARM_MCHIP_ECC_UNCORRECT_ERR
128
Chip Type: N Chip
Code
CMALARM_NCHIP_RDDMA_JBUS_TIMEOUT_ERR
256
CMALARM_NCHIP_RDDMA_FIFO_OVFLW_ERR
257
CMALARM_NCHIP_RDDMA_FIFO_UNFLW_ERR
258
CMALARM_NCHIP_RDDMA_SIZE_ERR
259
CMALARM_NCHIP_RDDMA_JBUS_CRC_ERR
260
CMALARM_NCHIP_WRDMA_PKTR_ERR
261
CMALARM_NCHIP_WRDMA_PKT_CRC_ERR
262
CMALARM_NCHIP_WRDMA_JBUS_TIMEOUT_ERR
263
CMALARM_NCHIP_WRDMA_FIFO_OVFLW_ERR
264
CMALARM_NCHIP_WRDMA_FIFO_UNFLW_ERR
265
CMALARM_NCHIP_WRDMA_PKT_LEN_ERR
266
CMALARM_NCHIP_WRDMA_JBUS_CRC_ERR
267
CMALARM_NCHIP_PKTR_DMA_AGE_ERR
268
CMALARM_NCHIP_PKTR_ICELLSIG_ERR
269
CMALARM_NCHIP_PKTR_FTTL_ERR
270
CMALARM_NCHIP_RODR_OFFSET_OVFLW_ERR
271
CMALARM_NCHIP_PKTR_TMO_CELL_ERR
272
CMALARM_NCHIP_PKTR_TMO_OUTRANGE_ERR
273
CMALARM_NCHIP_PKTR_MD_REQUEST_Q_OVFLW_ERR
274
Copyright © 2013, Juniper Networks, Inc.
171
PTX Series Packet Transport Switch Software Documentation
CMALARM_NCHIP_PKTR_DMA_BUFFER_OVFLW_ERR
275
CMALARM_NCHIP_PKTR_GRT_OVFLW_ERR
276
CMALARM_NCHIP_FRQ_ERR
277
CMALARM_NCHIP_RODR_IN_Q_OVFLW_ERR
278
CMALARM_NCHIP_DBUF_CRC_ERR
279
Chip Type: R Chip
Code
CMALARM_RCHIP_SRAM_PARITY_ERR
512
Chip Type: R Chip
Code
CMALARM_ICHIP_WO_DESRD_ID_ERR
601
CMALARM_ICHIP_WO_DESRD_DATA_ERR
602
CMALARM_ICHIP_WO_DESRD_OFLOW_ERR
603
CMALARM_ICHIP_WO_HDRF_UCERR_ERR
604
CMALARM_ICHIP_WO_HDRF_MTUERR_ERR
605
CMALARM_ICHIP_WO_HDRF_PARITY_ERR
606
CMALARM_ICHIP_WO_HDRF_TOERR_ERR
607
CMALARM_ICHIP_WO_IP_CRC_ERR
608
CMALARM_ICHIP_WO_IP_INTER_ERR
609
CMALARM_ICHIP_WI_WAN_TIMEOUT_ERR
625
CMALARM_ICHIP_WI_FAB_TIMEOUT_ERR
626
CMALARM_ICHIP_RLDRAM_BIST_ERR
630
CMALARM_ICHIP_SDRAM_BIST_ERR
631
CMALARM_ICHIP_RLDRAM_PARITY_ERR
632
CMALARM_ICHIP_SDRAM_UNCORRECT_ERR
633
CMALARM_ICHIP_SDRAM_CORRECT_ERR
634
CMALARM_ICHIP_FUSE_DONE_ERR
635
172
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
According to the table above, the 279 error code corresponds to
CMALARM_NCHIP_DBUF_CRC_ERR; this means that new CRC errors were seen on the
NCHIP of this particular FPC, which is FPC as per the logs.
If you do not want to convert decimal to binary and vice-versa, you may use the following
shortcut:
For major alarms, the Actual Error Code = (Error Code - 1)/2, where Error Code is the
code that you get in the log message. For example, if you get the following log:
Apr 12 08:04:10 send: red alarm set, device FPC 6, reason FPC 6 Major Errors - Error
code: 257
Actual Error Code = (257-1)/2 = 128. Similarly, for minor alarms, Actual Error Code = (Error
Code)/2
Required Privilege
Level
Related
Documentation
view
•
Configuring an Alarm Entry and Its Attributes
•
Chassis Conditions That Trigger Alarms
List of Sample Output
show chassis alarms (Alarms Active) on page 174
show chassis alarms (No Alarms Active) on page 174
show chassis alarms (Fan Tray) on page 174
show chassis alarms (MX2020 Router) on page 174
show chassis alarms (MX2010 Router) on page 174
show chassis alarms (T4000 Router) on page 174
show chassis alarms (Unreachable Destinations Present on a T Series
Router) on page 175
show chassis alarms (FPC Offline Due to Unreachable Destinations on a T Series
Router) on page 175
show chassis alarms (SCG Absent on a T Series Router) on page 175
show chassis alarms (Alarms Active on a TX Matrix Router) on page 175
show chassis alarms (Alarms on a T4000 Router After the enhanced-mode Statement
is Enabled) on page 176
show chassis alarms (Backup Routing Engine) on page 176
show chassis alarms (Alarms Active on the QFX Series) on page 176
show chassis alarms node-device (Alarms Active on the QFabric System) on page 176
show chassis alarms (Alarms Active on the QFabric System) on page 177
show chassis alarms (Alarms Active on an EX8200 Switch) on page 177
show chassis alarms (Alarms Active on a PTX5000 Packet Transport
Switch) on page 177
show chassis alarms (Alarms Active on an ACX2000 Universal Access
Router) on page 178
Output Fields
Table 14 on page 174 lists the output fields for the show chassis alarms command. Output
fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
173
PTX Series Packet Transport Switch Software Documentation
Table 14: show chassis alarms Output Fields
Field Name
Field Description
Alarm time
Date and time the alarm was first recorded.
Class
Severity class for this alarm: Minor or Major.
Description
Information about the alarm.
Sample Output
show chassis alarms (Alarms Active)
user@host> show chassis alarms
3 alarms are currently active
Alarm time
Class Description
2000-02-07 10:12:22 UTC Major fxp0: ethernet link down
2000-02-07 10:11:54 UTC Minor YELLOW ALARM - PEM 1 Removed
2000-02-07 10:11:03 UTC Minor YELLOW ALARM - Lower Fan Tray Removed
show chassis alarms (No Alarms Active)
user@host> show chassis alarms
No alarms are currently active
show chassis alarms (Fan Tray)
user@host> show chassis alarms
4 alarms currently active
Alarm time
Class
2010-11-11 20:27:38 UTC Major
2010-11-11 20:27:13 UTC Minor
2010-11-11 20:27:13 UTC Major
2010-11-11 20:27:13 UTC Major
Description
Side Fan Tray
Side Fan Tray
Side Fan Tray
Side Fan Tray
7
7
5
0
Failure
Overspeed
Failure
Failure
show chassis alarms (MX2020 Router)
user@host> show chassis alarms
1 alarms currently active
Alarm time Class Description
2012-10-03 12:14:59 PDT Minor Plane 0 not online
show chassis alarms (MX2010 Router)
user@host> show chassis alarms
7 alarms currently active
Alarm time
Class
2012-08-07 00:46:06 PDT Major
2012-08-06 18:24:36 PDT Minor
2012-08-06 07:41:04 PDT Minor
2012-08-04 02:42:06 PDT Minor
2012-08-03 21:14:24 PDT Minor
2012-08-03 12:26:03 PDT Minor
2012-08-03 10:40:18 PDT Minor
Description
Fan Tray 2 Failure
Redundant feed missing for
Redundant feed missing for
Redundant feed missing for
Loss of communication with
Redundant feed missing for
Redundant feed missing for
PSM 6
PSM 8
PSM 5
Backup RE
PSM 4
PSM 7
show chassis alarms (T4000 Router)
user@host> show chassis alarms
174
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
9 alarms currently active
Alarm time
Class
2007-06-02 01:41:10 UTC Minor
2007-06-02 01:41:10 UTC Minor
2007-06-02 01:41:10 UTC Minor
2007-05-30 19:37:33 UTC Major
2007-05-30 19:37:29 UTC Minor
2007-05-30 19:37:13 UTC Major
2007-05-30 19:37:13 UTC Major
2007-05-30 19:37:03 UTC Major
2007-05-30 19:37:03 UTC Minor
Description
RE 0 Not Supported
CB 0 Not Supported
Mixed Master and Backup RE types
SPMB 1 not online
Front Bottom Fan Tray Absent
PEM 1 Input Failure
PEM 0 Not OK
PEM 0 Improper for Platform
Backup RE Active
show chassis alarms (Unreachable Destinations Present on a T Series Router)
user@host> show chassis alarms
10 alarms currently active
Alarm time
Class
2011-08-30 18:43:53 PDT Major
2011-08-30 18:43:53 PDT Major
2011-08-30 18:43:52 PDT Major
2011-08-30 18:43:52 PDT Major
2011-08-30 18:43:52 PDT Minor
2011-08-30 18:43:33 PDT Minor
2011-08-30 18:43:28 PDT Minor
2011-08-30 18:43:05 PDT Minor
2011-08-30 18:43:28 PDT Minor
2011-08-30 18:43:05 PDT Major
Description
FPC 7 has unreachable
FPC 5 has unreachable
FPC 3 has unreachable
FPC 2 has unreachable
SIB 0 Not Online
SIB 4 Not Online
SIB 3 Not Online
SIB 2 Not Online
SIB 1 Not Online
PEM 1 Not Ok
destinations
destinations
destinations
destinations
show chassis alarms (FPC Offline Due to Unreachable Destinations on a T Series Router)
user@host> show chassis alarms
10 alarms currently active
Alarm time
Class
2011-08-30 18:43:53 PDT Major
2011-08-30 18:43:53 PDT Major
2011-08-30 18:43:52 PDT Major
2011-08-30 18:43:52 PDT Major
2011-08-30 18:43:52 PDT Minor
2011-08-30 18:43:33 PDT Minor
2011-08-30 18:43:28 PDT Minor
2011-08-30 18:43:05 PDT Minor
2011-08-30 18:43:28 PDT Minor
2011-08-30 18:43:05 PDT Major
Description
FPC 7 offline due
FPC 5 offline due
FPC 3 offline due
FPC 2 offline due
SIB 0 Not Online
SIB 4 Not Online
SIB 3 Not Online
SIB 2 Not Online
SIB 1 Not Online
PEM 1 Not Ok
to
to
to
to
unreachable
unreachable
unreachable
unreachable
destinations
destinations
destinations
destinations
show chassis alarms (SCG Absent on a T Series Router)
user@host> show chassis alarms
4 alarms currently active
Alarm time
Class
2011-01-23 21:42:46 PST Major
Description
SCG 0 NO EXT CLK MEAS-BKUP SCG ABS
show chassis alarms (Alarms Active on a TX Matrix Router)
user@host> show chassis alarms
scc-re0:
-------------------------------------------------------------------------8 alarms currently active
Alarm time
Class Description
2004-08-05 18:43:53 PDT Minor LCC 0 Minor Errors
2004-08-05 18:43:53 PDT Minor SIB 3 Not Online
2004-08-05 18:43:52 PDT Major SIB 2 Absent
2004-08-05 18:43:52 PDT Major SIB 1 Absent
Copyright © 2013, Juniper Networks, Inc.
175
PTX Series Packet Transport Switch Software Documentation
2004-08-05 18:43:52 PDT Major SIB 0 Absent
2004-08-05 18:43:33 PDT Major LCC 2 Major Errors
2004-08-05 18:43:28 PDT Major LCC 0 Major Errors
2004-08-05 18:43:05 PDT Minor LCC 2 Minor Errors
lcc0-re0:
-------------------------------------------------------------------------5 alarms currently active
Alarm time
Class Description
2004-08-05 18:43:53 PDT Minor SIB 3 Not Online
2004-08-05 18:43:49 PDT Major SIB 2 Absent
2004-08-05 18:43:49 PDT Major SIB 1 Absent
2004-08-05 18:43:49 PDT Major SIB 0 Absent
2004-08-05 18:43:28 PDT Major PEM 0 Not OK
lcc2-re0:
-------------------------------------------------------------------------5 alarms currently active
Alarm time
Class Description
2004-08-05 18:43:35 PDT Minor SIB 3 Not Online
2004-08-05 18:43:33 PDT Major SIB 2 Absent
2004-08-05 18:43:33 PDT Major SIB 1 Absent
2004-08-05 18:43:33 PDT Major SIB 0 Absent
2004-08-05 18:43:05 PDT Minor PEM 1 Absent
show chassis alarms (Alarms on a T4000 Router After the enhanced-mode Statement is Enabled)
On T4000 routers, when you include the enhanced-mode statement at the [edit chassis
network-services] hierarchy level and reboot the system, only the T4000 Type 5 FPCs
present on the router are online while the remaining FPCs are offline, and FPC
misconfiguration alarms are generated. The show chassis alarm command output displays
FPC misconfiguration (FPC fpc-slot misconfig) as the reason for the generation of the
alarms.
user@host> show chassis alarms
2 alarms currently active
Alarm time
Class
2011-10-22 10:10:47 PDT Major
2011-10-22 10:10:46 PDT Major
Description
FPC 1 misconfig
FPC 0 misconfig
show chassis alarms (Backup Routing Engine)
user@host> show chassis alarms
2 alarms are currently active
Alarm time
Class
2005-04-07 10:12:22 PDT Minor
2005-04-07 10:11:54 PDT Major
Description
Host 1 Boot from alternate media
Host 1 compact-flash missing in Boot List
show chassis alarms (Alarms Active on the QFX Series)
user@switch> show chassis alarms
1 alarms currently active
Alarm time
Class Description
2012-03-05 2:10:24 UTC Major FPC 0 PEM 0 Airflow not matching Chassis Airflow
show chassis alarms node-device (Alarms Active on the QFabric System)
user@switch> show chassis alarms node-device ED3691
node-device ED3694
3 alarms currently active
Alarm time
Class Description
2011-08-24 16:04:15 UTC Major ED3694:fte-0/1/2: Link down
176
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
2011-08-24 16:04:14 UTC
2011-08-24 14:21:14 UTC
Major
Major
ED3694:fte-0/1/0: Link down
ED3694 PEM 0 is not supported/powered
show chassis alarms (Alarms Active on the QFabric System)
user@switch> show chassis alarms
IC-A0001:
-------------------------------------------------------------------------1 alarms currently active
Alarm time
Class Description
2011-08-24 16:04:15 UTC Minor Backup RE Active
ED3694:
-------------------------------------------------------------------------3 alarms currently active
Alarm time
Class Description
2011-08-24 16:04:15 UTC Major ED3694:fte-0/1/2: Link down
2011-08-24 16:04:14 UTC Major ED3694:fte-0/1/0: Link down
2011-08-24 14:21:14 UTC Major ED3694 PEM 0 is not supported/powered
SNG-0:
-------------------------------------------------------------------------NW-NG-0:
-------------------------------------------------------------------------1 alarms currently active
Alarm time
Class Description
2011-08-24 15:49:27 UTC Major ED3691 PEM 0 is not supported/powered
show chassis alarms (Alarms Active on an EX8200 Switch)
user@switch> show chassis alarms
6 alarms currently active
Alarm time
Class Description
2010-12-02 19:15:22 UTC Major Fan Tray Failure
2010-12-02 19:15:22 UTC Major Fan Tray Failure
2010-12-02 19:15:14 UTC Minor Check CB 0 Fabric Chip 1 on Plane/FPC/PFE: 1/5/0,
1/5/1, 1/5/2, 1/5/3, 1/7/0, 1/7/1, 1/7/2, 1/7/3, 2/5/0, 2/5/1, ...
2010-12-02 19:15:14 UTC Minor Check CB 0 Fabric Chip 0 on Plane/FPC/PFE: 1/5/0,
1/5/1, 1/5/2, 1/5/3, 1/7/0, 1/7/1, 1/7/2, 1/7/3, 2/5/0, 2/5/1, ...
2010-12-02 19:14:18 UTC Major PSU 1 Output Failure
2010-12-02 19:14:18 UTC Minor Loss of communication with Backup RE
show chassis alarms (Alarms Active on a PTX5000 Packet Transport Switch)
user@switch> show chassis alarms
23 alarms currently
Alarm time
2011-07-12 16:22:05
2011-07-12 16:22:05
2011-07-12 16:21:57
2011-07-12 16:21:57
2011-07-12 15:56:06
2011-07-12 15:56:06
2011-07-12 15:56:06
2011-07-12 15:28:20
2011-07-12 15:19:14
Copyright © 2013, Juniper Networks, Inc.
active
Class
PDT Minor
PDT Major
PDT Minor
PDT Major
PDT Major
PDT Minor
PDT Major
PDT Major
PDT Minor
Description
No Redundant Power for Rear Chassis
PDU 0 PSM 1 Not OK
No Redundant Power for Fan 0-2
PDU 0 PSM 0 Not OK
PDU 1 PSM 2 Not OK
No Redundant Power for FPC 0-7
PDU 0 PSM 3 Not OK
PDU 0 PSM 2 Not OK
Backup RE Active
177
PTX Series Packet Transport Switch Software Documentation
show chassis alarms (Alarms Active on an ACX2000 Universal Access Router)
user@host> show chassis alarms
7 alarms currently active
Alarm time
Class
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
2012-05-22 11:19:09 UTC Major
178
Description
xe-0/3/1: Link
xe-0/3/0: Link
ge-0/1/7: Link
ge-0/1/6: Link
ge-0/1/3: Link
ge-0/1/2: Link
ge-0/1/1: Link
down
down
down
down
down
down
down
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment
Syntax
Syntax (T320, T640,
T1600, and T4000
Routers)
show chassis environment
show chassis environment
<cb cb-slot-number>
<fpc fpc-slot-number>
<fpm>
<pem pem-slot-number>
<routing-engine re-slot-number>
<scg scg-slot-number>
<sib sib-slot-number>
Syntax (TX Matrix
Routers)
show chassis environment
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
show chassis environment
<lcc number | sfc number>
Syntax (MX Series
Routers)
show chassis environment
<all-members>
<local>
<member member-id>
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis environment
<adc adc-slot-number>
<cb cb-slot-number>
<fpc fpc-slot-number>
<fpm>
<monitored>
<psm psm-slot-number>
<routing-engine re-slot-number>
<sfb sfb-slot-number>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis environment
<adc adc-slot-number>
<cb cb-slot-number>
<fpc fpc-slot-number>
<fpm>
<monitored>
<psm psm-slot-number>
<routing-engine re-slot-number>
<sfb sfb-slot-number>
Syntax (EX Series
Switch)
show chassis environment
<all-members>
<cb cb-slot-number>
<fpc fpc-slot-number>
<local>
<member member-id>
<routing-engine re-slot-number>
Copyright © 2013, Juniper Networks, Inc.
179
PTX Series Packet Transport Switch Software Documentation
Syntax (EX Series
Switch)
Syntax (QFX Series)
show chassis environment
<all-members>
<cb cb-slot-number>
<fpc fpc-slot-number>
<local>
<member member-id>
<power-supply-unit psu-slot-number>
<routing-engine slot-number>
show chassis environment
<cb slot-number <interconnect-device name>>
<fpc slot-number <interconnect-device name>>
<interconnect-device name <slot-number>
<node-device name>
<pem slot-number (interconnect-device name slot-number) | (node-device name)>
<routing-engine name <interconnect-device name slot-number>>
Syntax (PTX Series
Packet Transport
Switches)
show chassis environment
<cb cb-slot-number>
<ccg ccg-slot-number >
<fpc fpc-slot-number>
<fpm>
<monitored>
<pdu pdu-slot-number>
<routing-engine re-slot-number>
<sib sib-slot-number>
Syntax (ACX Series
Universal Access
Routers)
show chassis environment
<cb cb-slot-number>
<pem pem-slot-number>
<routing-engine re-slot-number>
Release Information
Description
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
monitored option added in Junos OS Release 12.1 for PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
pem option introduced in Junos OS Release 12.3 for ACX4000 Universal Access Routers.
Display environmental information about the router or switch chassis, including the
temperature and information about the fans, power supplies, and Routing Engine.
In addition on ACX4000 routers, display temperature information about the different
channels of a Modular Interface Card (MIC). The number of channels displayed depends
on the type of MIC installed.
180
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Options
none—Display environmental information about the router or switch chassis. On a TX
Matrix router, display environmental information about the TX Matrix router and its
attached T640 routers. On a TX Matrix Plus router, display environmental information
about the TX Matrix Plus router and its attached T1600 routers.
all-members—(MX Series routers and EX Series switches only) (Optional) Display chassis
environmental information for all the members of the Virtual Chassis configuration.
adc adc-slot-number—(MX2020 and MX2010 routers only) (Optional) Display chassis
environmental information for the adapter cards. For MX2020 routers, replace
adc-slot-number with a value from 0 through 19. For MX2010 routers, replace
adc-slot-number with a value from 0 through 9.
cb cb-slot-number—(ACX Series Universal Access Routers, EX Series switches, M120,
M320, and M40e routers, MX Series routers, MX2020 routers, MX2010 routers, PTX
Series Packet Transport Switches, QFX Series, and T Series routers only) (Optional)
Display chassis environmental information for the Control Board. On devices other
than EX Series switches, replace cb-slot with 0 or 1. For the EX Series switches, see
EX Series Switches Hardware and CLI Terminology Mapping for information on CB
slot numbering.
cb interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Control Board on an Interconnect device.
ccg ccg-slot-number—(PTX Series only) (Optional) Display chassis environmental
information for the Centralized Clock Generator. Replace cb-slot with a value of 0
or 1.
fpc fpc-slot—(EX Series switches, M120, M320, and M40e routers, MX Series routers,
MX2010 routers, MX2020 routers, PTX Series Packet Transport Switches, QFX Series,
QFX3500 switches, QFabric systems, and T Series routers) (Optional) Display chassis
environmental information for a specified Flexible PIC Concentrator. For MX2010
routers, replace fpc-slot with a value from 0 through 9. For MX2020 routers, replace
fpc-slot with a value from 0 through 19. For information about FPC numbering, see
show chassis environment fpc. On a QFabric system, display chassis environmental
information for a specified Flexible PIC Concentrator on an Interconnect device. On
an EX Series switch, display chassis environmental information for a specified Flexible
PIC Concentrator; see EX Series Switches Hardware and CLI Terminology Mapping
for information on FPC numbering.
fpm—(M120, M320, and M40e routers, MX2010 routers, MX2020 routers, PTX Series,
Packet Transport Switches, and T Series routers only) (Optional) Display chassis
environmental information for the craft interface (FPM).
interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Interconnect device.
monitored—(MX2020 routers and PTX Series Packet Transport Switches only) (Optional)
Display chassis environmental information for monitored temperatures only.
Temperatures that are not included in temperature alarm computations are not
displayed.
Copyright © 2013, Juniper Networks, Inc.
181
PTX Series Packet Transport Switch Software Documentation
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display chassis environmental information for a specified T640 router (or line-card
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, display
chassis environmental information for a specified T1600 router (or line-card chassis)
that is connected to the TX Matrix Plus router. Replace number with a value from
0 through 3.
local—(MX Series routers and EX Series switches) (Optional) Display chassis
environmental information for the local Virtual Chassis member.
member member-id—(MX Series routers and EX Series switches only) (Optional) Display
chassis environmental information for the specified member of the Virtual Chassis
configuration. On MX Series routers, replace member-id with a value of 0 or 1. For EX
Series switches, see member for member ID values.
node-device name—(QFabric systems only) (Optional) Display chassis environmental
information for the Node device.
pdu pdu-slot-number—(PTX Series only) (Optional) Display chassis environmental
information for the specified power distribution unit.
pem—(QFX3500 switches and QFabric systems only) (Optional) Display chassis
environmental information for the Power Entry Module on the specified Interconnect
device or Node device.
pem pem-slot-number—(ACX Series Universal Access Routers, M120, M320, and M40e
routers, MX Series routers, QFX Series, and T Series routers only) (Optional) Display
chassis environmental information for the Power Entry Module on the specified
Power Entry Module. For information about the options, see show chassis environment
pem.
psm psm-slot-number—(MX2020 and MX2010 routers only) (Optional) Display chassis
environmental information for the power supply module. For MX2020 routers, replace
psm-slot-number with a value from 0 through 17. For MX2010 routers, replace
psm-slot-number with a value from 0 through 8.
psu psu-slot-number—(EX Series switches only) (Optional) Display chassis environmental
information for a specified power supply. See EX Series Switches Hardware and CLI
Terminology Mapping for detailed information.
routing-engine—(QFX3500 switches and QFabric systems only) (Optional) Display
chassis environmental information for the Routing Engine on the specified
Interconnect device.
routing-engine re-slot-number—(Optional) Display chassis environmental information
for the specified Routing Engine. For information about the options, see show chassis
environment routing-engine.
scg—(T Series routers only) (Optional) Display chassis environmental information about
the SONET Clock Generator.
182
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
scc—(TX Matrix routers only) (Optional) Display chassis environmental information
about the TX Matrix router (or switch-card chassis).
sfb sfb-slot-number—(MX2020 and MX2010 routers only) (Optional) Display chassis
environmental information for the power supply module. Replace sfb-slot-number
with a value from 0 through 7.
sfc number—(TX Matrix Plus routers only) (Optional) Display chassis environmental
information about the TX Matrix Plus router (or switch-fabric chassis). Replace
number with 0.
sib sib-slot-number—(M320 routers, PTX Series Packet Transport Switches, and T Series
routers only) (Optional) Display chassis environmental information about the
specified switch interface board. For information about the options, see show chassis
environment sib.
Required Privilege
Level
Related
Documentation
List of Sample Output
view
•
show chassis environment adc
•
show chassis environment cb on page 229
•
show chassis environment ccg on page 246
•
show chassis environment cip
•
show chassis environment fpc on page 248
•
show chassis environment fpm on page 273
•
show chassis environment mcs
•
show chassis environment monitored on page 279
•
show chassis environment pcg
•
show chassis environment pdu on page 292
•
show chassis environment pem
•
show chassis environment psm
•
show chassis environment psu
•
show chassis environment routing-engine on page 295
•
show chassis environment scg
•
show chassis environment sfb
•
show chassis environment sib on page 300
show chassis environment (J2300 Router) on page 186
show chassis environment (J4300 or J6300 Router) on page 186
show chassis environment (M5 Router) on page 186
show chassis environment (M7i Router) on page 187
show chassis environment (M10 Router) on page 187
Copyright © 2013, Juniper Networks, Inc.
183
PTX Series Packet Transport Switch Software Documentation
show chassis environment (M10i Router) on page 187
show chassis environment (M20 Router) on page 188
show chassis environment (M40 Router) on page 188
show chassis environment (M40e Router) on page 188
show chassis environment (M120 Router) on page 189
show chassis environment (M160 Router) on page 190
show chassis environment (M320 Router) on page 190
show chassis environment (MX240 Router) on page 191
show chassis environment (MX240 Router with Enhanced MX SCB) on page 192
show chassis environment (MX480 Router) on page 193
show chassis environment (MX480 Router with Enhanced MX SCB) on page 194
show chassis environment (MX960 Router) on page 195
show chassis environment (MX960 Router with Enhanced MX SCB) on page 196
show chassis environment (MX2020 Router) on page 198
show chassis environment (MX2010 Router) on page 208
show chassis environment (T320 Router) on page 213
show chassis environment (T640 Router) on page 214
show chassis environment (T4000 Router) on page 215
show chassis environment (TX Matrix Router) on page 216
show chassis environment (T1600 Router) on page 218
show chassis environment (TX Matrix Plus Router) on page 219
show chassis environment (EX4200 Standalone Switch) on page 221
show chassis environment (EX8216 Switch) on page 221
show chassis environment (QFX Series) on page 222
show chassis environment interconnect-device (QFabric System) on page 222
show chassis environment node-device (QFabric System) on page 224
show chassis environment pem node-device (QFabric System) on page 225
show chassis environment (PTX5000 Packet Transport Switch) on page 225
show chassis environment (ACX2000 Universal Access Router) on page 227
Output Fields
184
Table 15 on page 185 lists the output fields for the show chassis environment command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 15: show chassis environment Output Fields
Field Name
Field Description
Class
Information about the category or class of chassis component:
•
•
Power: Power information:
•
(M5, M10, M20, and M40 routers and EX Series switches only) Power supply status: OK, Testing,
(during initial power-on), Failed, or Absent.
•
(M7i, M10i, M40e, M120, M160, M320, and T Series routers and EX Series switches only) Power
Entry Modules status: OK, Testing, (during initial power-on), Check, Failed, or Absent.
•
(PTX Series only) Power information is reported in PDU or PSM combinations. The status is: OK,
Testing, (during initial power-on), Check, Failed, or Absent.
Temp: Temperature of air flowing through the chassis in degrees Celsius (C) and Fahrenheit (F).
•
On PTX Series Packet Transport Switches and MX2010 and MX2020 Routers, multiple cooling
zones are supported. FRU temperatures in each zone are coordinated with the fan speed of fan
trays in those zones.
•
EX2200 switches have a side-to-rear cooling system. The Local Intake temperature is measured
by the sensor on the right side of the chassis, and the Remote Intake temperature is measured
by the sensor on the left side of the chassis.
•
Pic: On ACX4000 Routers, multiple temperature channels on a MIC. The status is: OK and the
Measurement is in degrees Celsius (C) and Fahrenheit (F).
•
Fan: Fan status: OK, Testing (during initial power-on), Failed, or Absent.
On PTX Series Packet Transport Switches and MX2010 and MX2020 Routers, multiple fan trays
are supported. Fan status is reported in Fan Tray or Fan combinations. Measurement indicates
actual fan RPM (PTX and MX2010 and MX2020 Routers only).
•
Item
Misc: Information about other components of the chassis.
•
On some routers, this field indicates the status of one or more additional components.
•
On the M40e, M160, and M320 router, Misc includes CIP (Connector Interface Panel). OK indicates
that the CIP is present. Absent indicates that the CIP is not present.
•
On T Series routers, Misc includes CIP and SPMB (Switch Processor Mezzanine Board). OK
indicates that the CIP or SPMB is present. Absent indicates that the CIP or SPMB is not present.
•
On PTX Series Packet Transport Switches, Misc includes the SPMB (Switch Processor Mezzanine
Board). The SPMB is located on the control boards. OK indicates that the control board is present.
Absent indicates that the control board is not present.
(MX2010 and MX2020 Routers) Information about the chassis component: Routing Engines, Controls
Boards (CBs), Switch Fabric Boards (SFBs), PICs, Flexible PIC Concentrators (FPCs), and Adapter
Cards (ADCs).
Copyright © 2013, Juniper Networks, Inc.
185
PTX Series Packet Transport Switch Software Documentation
Table 15: show chassis environment Output Fields (continued)
Field Name
Field Description
Status
(MX2010 and MX2020 Routers) Status of the specified chassis component. For example, if the Class
is Fan, the fan status can be:
•
OK: The fans are operational.
•
Testing: The fans are being tested during initial power-on.
•
Failed: The fans have failed or the fans are not spinning.
•
Absent: The fan tray is not installed.
If the Class is Power, the power supply status can be:
Measurement
•
OK: The power component is operational.
•
Testing: The power component is being tested during initial power-on.
•
Check: There is insufficient power---that is, fewer than the minimum required feeds are connected.
•
Failed: The inputs leads have failed.
•
Absent: The power component is not installed.
(MX2010 and MX2020 Routers) Dependant on the Class. For example, if the Class is Temp, indicates
the temperature in degree Celsius and degrees Fahrenheit. If the Class is Fan, indicates actual fan
RPM.
Sample Output
show chassis environment (J2300 Router)
user@host> show chassis environment
Class Item
Status
Temp Routing Engine
OK
Fan
Fan
OK
Measurement
40 degrees C / 104 degrees F
show chassis environment (J4300 or J6300 Router)
user@host> show chassis environment
Class Item
Status
Temp Routing Engine
OK
Fan
Fan 0
OK
Fan 1
OK
Measurement
41 degrees C / 105 degrees F
show chassis environment (M5 Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply A
OK
Power Supply B
Absent
Temp FPC 0
OK
FEB
OK
PS Intake
OK
PS Exhaust
OK
Routing Engine
OK
Fans Left Fan 1
OK
Left Fan 2
OK
Left Fan 3
OK
Left Fan 4
OK
186
Measurement
30 degrees C / 86 degrees
33 degrees C / 91 degrees
27 degrees C / 80 degrees
27 degrees C / 80 degrees
34 degrees C / 93 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Misc
Craft Interface
OK
show chassis environment (M7i Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply 0
OK
Power Supply 1
Absent
Temp Intake
OK
FPC 0
OK
Power Supplies
OK
CFEB Intake
OK
CFEB Exhaust
OK
Routing Engine
OK
Fans Fan 1
OK
Fan 2
OK
Fan 3
OK
Fan 4
OK
Measurement
22 degrees C / 71 degrees
23 degrees C / 73 degrees
23 degrees C / 73 degrees
24 degrees C / 75 degrees
29 degrees C / 84 degrees
26 degrees C / 78 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
F
F
show chassis environment (M10 Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply A
OK
Power Supply B
Failed
Temp FPC 0
OK
FPC 1
OK
FEB
OK
PS Intake
OK
PS Exhaust
OK
Routing Engine
OK
Fans Left Fan 1
OK
Left Fan 2
OK
Left Fan 3
OK
Left Fan 4
OK
Misc Craft Interface
OK
Measurement
36 degrees C / 96 degrees
35 degrees C / 95 degrees
34 degrees C / 93 degrees
31 degrees C / 87 degrees
34 degrees C / 93 degrees
35 degrees C / 95 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
F
F
show chassis environment (M10i Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply 0
OK
Power Supply 1
OK
Power Supply 2
Absent
Power Supply 3
Absent
Temp Intake
OK
FPC 0
OK
FPC 1
OK
Lower Power Supplies
OK
Upper Power Supplies
OK
CFEB Intake
OK
CFEB Exhaust
OK
Routing Engine 0
OK
Routing Engine 1
OK
Fans Fan Tray 0 Fan 1
OK
Fan Tray 0 Fan 2
OK
Fan Tray 0 Fan 3
OK
Fan Tray 0 Fan 4
OK
Fan Tray 0 Fan 5
OK
Copyright © 2013, Juniper Networks, Inc.
Measurement
26 degrees C / 78 degrees
27 degrees C / 80 degrees
28 degrees C / 82 degrees
29 degrees C / 84 degrees
28 degrees C / 82 degrees
27 degrees C / 80 degrees
36 degrees C / 96 degrees
31 degrees C / 87 degrees
27 degrees C / 80 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
F
F
F
F
F
187
PTX Series Packet Transport Switch Software Documentation
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
0
0
0
1
1
1
1
1
1
1
1
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
6
7
8
1
2
3
4
5
6
7
8
OK
OK
OK
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (M20 Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply A
OK
Power Supply B
Absent
Temp FPC 0
OK
FPC 1
OK
Power Supply A
OK
Power Supply B
Absent
SSB 0
OK
Backplane
OK
Routing Engine 0
OK
Routing Engine 1
Testing
Fans Rear Fan
OK
Front Upper Fan
OK
Front Middle Fan
OK
Front Bottom Fan
OK
Misc Craft Interface
OK
Measurement
28 degrees C / 82 degrees F
27 degrees C / 80 degrees F
22 degrees C / 71 degrees F
30 degrees C / 86 degrees F
22 degrees C / 71 degrees F
26 degrees C / 78 degrees F
Spinning
Spinning
Spinning
Spinning
at
at
at
at
normal
normal
normal
normal
speed
speed
speed
speed
show chassis environment (M40 Router)
user@host> show chassis environment
Class Item
Status
Power Power Supply A
OK
Power Supply B
Absent
Temp FPC 3
OK
FPC 6
OK
SCB
OK
Backplane @ A1
OK
Backplane @ A2
OK
Routing Engine
OK
Fans Top Impeller
OK
Bottom impeller
OK
Rear Left Fan
OK
Rear Center Fan
OK
Rear Right Fan
OK
Misc Craft Interface
OK
Measurement
24 degrees C / 75 degrees
26 degrees C / 78 degrees
26 degrees C / 78 degrees
28 degrees C / 82 degrees
23 degrees C / 73 degrees
26 degrees C / 78 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
F
F
show chassis environment (M40e Router)
user@host> show chassis environment
Class Item
Status
Power PEM 0
OK
PEM 1
Absent
Temp PCG 0
OK
PCG 1
OK
188
Measurement
44 degrees C / 111 degrees F
47 degrees C / 116 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
Misc
Routing Engine 0
Routing Engine 1
MCS 0
MCS 1
SFM 0 SPP
SFM 0 SPR
SFM 1 SPP
SFM 1 SPR
FPC 0
FPC 1
FPC 2
FPC 4
FPC 5
FPC 6
FPC 7
FPM CMB
FPM Display
Rear Bottom Blower
Rear Top Blower
Front Top Blower
Fan Tray Rear Left
Fan Tray Rear Right
Fan Tray Front Left
Fan Tray Front Right
CIP
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
40 degrees C / 104 degrees F
37 degrees C / 98 degrees F
45 degrees C / 113 degrees F
42 degrees C / 107 degrees F
40 degrees C / 104 degrees F
44 degrees C / 111 degrees F
43 degrees C / 109 degrees F
45 degrees C / 113 degrees F
38 degrees C / 100 degrees F
40 degrees C / 104 degrees F
38 degrees C / 100 degrees F
34 degrees C / 93 degrees F
43 degrees C / 109 degrees F
41 degrees C / 105 degrees F
43 degrees C / 109 degrees F
28 degrees C / 82 degrees F
28 degrees C / 82 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (M120 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
FEB 3 Intake
FEB 3 Exhaust A
FEB 3 Exhaust B
FEB 4 Intake
FEB 4 Exhaust A
FEB 4 Exhaust B
FPC 2 Exhaust A
FPC 2 Exhaust B
FPC 3 Exhaust A
FPC 3 Exhaust B
FPC 4 Exhaust A
FPC 4 Exhaust B
Fans Front Top Tray Fan 1
Front Top Tray Fan 2
Front Top Tray Fan 3
Front Top Tray Fan 4
Front Top Tray Fan 5
Front Top Tray Fan 6
Front Top Tray Fan 7
Front Top Tray Fan 8
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
43 degrees C / 109 degrees F
44 degrees C / 111 degrees F
33 degrees C / 91 degrees F
36 degrees C / 96 degrees F
35 degrees C / 95 degrees F
34 degrees C / 93 degrees F
38 degrees C / 100 degrees F
35 degrees C / 95 degrees F
35 degrees C / 95 degrees F
37 degrees C / 98 degrees F
39 degrees C / 102 degrees F
33 degrees C / 91 degrees F
39 degrees C / 102 degrees F
36 degrees C / 96 degrees F
32 degrees C / 89 degrees F
31 degrees C / 87 degrees F
32 degrees C / 89 degrees F
33 degrees C / 91 degrees F
32 degrees C / 89 degrees F
30 degrees C / 86 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
189
PTX Series Packet Transport Switch Software Documentation
Front Bottom Tray Fan 1
Front Bottom Tray Fan 2
Front Bottom Tray Fan 3
Front Bottom Tray Fan 4
Front Bottom Tray Fan 5
Front Bottom Tray Fan 6
Front Bottom Tray Fan 7
Front Bottom Tray Fan 8
Rear Top Tray Fan 1
Rear Top Tray Fan 2
Rear Top Tray Fan 3
Rear Top Tray Fan 4
Rear Top Tray Fan 5
Rear Top Tray Fan 6
Rear Top Tray Fan 7
Rear Top Tray Fan 8
Rear Bottom Tray Fan 1
Rear Bottom Tray Fan 2
Rear Bottom Tray Fan 3
Rear Bottom Tray Fan 4
Rear Bottom Tray Fan 5
Rear Bottom Tray Fan 6
Rear Bottom Tray Fan 7
Rear Bottom Tray Fan 8
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
show chassis environment (M160 Router)
user@host> show chassis environment
Class Item
Status
Power PEM 0
OK
Temp PCG 0
OK
PCG 1
Absent
Routing Engine 0
OK
Routing Engine 1
Absent
MCS 0
OK
SFM 0 SPP
OK
SFM 0 SPR
OK
SFM 1 SPP
OK
SFM 1 SPR
OK
SFM 2 SPP
OK
SFM 2 SPR
OK
SFM 3 SPP
OK
SFM 3 SPR
OK
FPC 0
OK
FPC 6
OK
FPM CMB
OK
FPM Display
OK
Fans Rear Bottom Blower
OK
Rear Top Blower
OK
Front Top Blower
OK
Fan Tray Rear Left
OK
Fan Tray Rear Right
OK
Fan Tray Front Left
OK
Fan Tray Front Right
OK
Misc CIP
OK
Measurement
PEM 1
Absent
45 degrees C / 113 degrees F
35 degrees C / 95 degrees F
50 degrees C / 122 degrees F
47 degrees C / 116 degrees F
49 degrees C / 120 degrees F
50 degrees C / 122 degrees F
50 degrees C / 122 degrees F
51 degrees C / 123 degrees F
52 degrees C / 125 degrees F
52 degrees C / 125 degrees F
48 degrees C / 118 degrees F
45 degrees C / 113 degrees F
43 degrees C / 109 degrees F
31 degrees C / 87 degrees F
33 degrees C / 91 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (M320 Router)
user@host> show chassis environment
190
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0
CB 1
SIB 0
SIB 1
SIB 2
SIB 3
FPC 0 Intake
FPC 0 Exhaust
FPC 1 Intake
FPC 1 Exhaust
FPC 2 Intake
FPC 2 Exhaust
FPC 3 Intake
FPC 3 Exhaust
FPC 6 Intake
FPC 6 Exhaust
FPC 7 Intake
FPC 7 Exhaust
FPM GBUS
Fan
Top Left Front fan
Top Right Rear fan
Top Right Front fan
Top Left Rear fan
Bottom Left Front fan
Bottom Right Rear fan
Bottom Right Front fan
Bottom Left Rear fan
Rear Fan 1 (TOP)
Rear Fan 2
Rear Fan 3
Rear Fan 4
Rear Fan 5
Rear Fan 6
Rear Fan 7 (Bottom)
Misc CIP
Status
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
33 degrees C / 91 degrees F
32 degrees C / 89 degrees F
36 degrees C / 96 degrees F
36 degrees C / 96 degrees F
38 degrees C / 100 degrees F
29 degrees C / 84 degrees F
38 degrees C / 100 degrees F
41 degrees C / 105 degrees F
28 degrees C / 82 degrees F
40 degrees C / 104 degrees F
29 degrees C / 84 degrees F
39 degrees C / 102 degrees F
28 degrees C / 82 degrees F
38 degrees C / 100 degrees F
28 degrees C / 82 degrees F
39 degrees C / 102 degrees F
27 degrees C / 80 degrees F
39 degrees C / 102 degrees F
27 degrees C / 80 degrees F
42 degrees C / 107 degrees F
30 degrees C / 86 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (MX240 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 0 ACBC
CB 0 SF A
CB 0 SF B
CB 1 Intake
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
40 degrees C / 104 degrees F
45 degrees C / 113 degrees F
39
37
36
34
38
37
49
41
37
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
102 degrees F
98 degrees F
96 degrees F
93 degrees F
100 degrees F
98 degrees F
120 degrees F
105 degrees F
98 degrees F
191
PTX Series Packet Transport Switch Software Documentation
Fans
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 SF A
CB 1 SF B
FPC 1 Intake
FPC 1 Exhaust A
FPC 1 Exhaust B
FPC 1 I3 0 TSensor
FPC 1 I3 0 Chip
FPC 1 I3 1 TSensor
FPC 1 I3 1 Chip
FPC 1 I3 2 TSensor
FPC 1 I3 2 Chip
FPC 1 I3 3 TSensor
FPC 1 I3 3 Chip
FPC 1 IA 0 TSensor
FPC 1 IA 0 Chip
FPC 1 IA 1 TSensor
FPC 1 IA 1 Chip
FPC 2 Intake
FPC 2 Exhaust A
FPC 2 Exhaust B
FPC 2 I3 0 TSensor
FPC 2 I3 0 Chip
FPC 2 I3 1 TSensor
FPC 2 I3 1 Chip
FPC 2 I3 2 TSensor
FPC 2 I3 2 Chip
FPC 2 I3 3 TSensor
FPC 2 I3 3 Chip
FPC 2 IA 0 TSensor
FPC 2 IA 0 Chip
FPC 2 IA 1 TSensor
FPC 2 IA 1 Chip
Front Fan
Middle Fan
Rear Fan
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
34 degrees C / 93 degrees F
39 degrees C / 102 degrees F
38 degrees C / 100 degrees F
47 degrees C / 116 degrees F
41 degrees C / 105 degrees F
33 degrees C / 91 degrees F
38 degrees C / 100 degrees F
53 degrees C / 127 degrees F
50 degrees C / 122 degrees F
53 degrees C / 127 degrees F
49 degrees C / 120 degrees F
52 degrees C / 125 degrees F
47 degrees C / 116 degrees F
49 degrees C / 120 degrees F
44 degrees C / 111 degrees F
46 degrees C / 114 degrees F
45 degrees C / 113 degrees F
44 degrees C / 111 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
32 degrees C / 89 degrees F
40 degrees C / 104 degrees F
52 degrees C / 125 degrees F
52 degrees C / 125 degrees F
56 degrees C / 132 degrees F
52 degrees C / 125 degrees F
55 degrees C / 131 degrees F
49 degrees C / 120 degrees F
52 degrees C / 125 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
50 degrees C / 122 degrees F
48 degrees C / 118 degrees F
47 degrees C / 116 degrees F
53 degrees C / 127 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (MX240 Router with Enhanced MX SCB)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 0 ACBC
CB 0 XF A
CB 0 XF B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 XF A
CB 1 XF B
192
Status
OK
OK
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
40 degrees C / 104 degrees F
45 degrees C / 113 degrees F
39
37
36
34
38
37
49
41
37
34
39
38
47
41
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
102 degrees F
98 degrees F
96 degrees F
93 degrees F
100 degrees F
98 degrees F
120 degrees F
105 degrees F
98 degrees F
93 degrees F
102 degrees F
100 degrees F
116 degrees F
105 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
FPC 1 Intake
FPC 1 Exhaust A
FPC 1 Exhaust B
FPC 1 I3 0 TSensor
FPC 1 I3 0 Chip
FPC 1 I3 1 TSensor
FPC 1 I3 1 Chip
FPC 1 I3 2 TSensor
FPC 1 I3 2 Chip
FPC 1 I3 3 TSensor
FPC 1 I3 3 Chip
FPC 1 IA 0 TSensor
FPC 1 IA 0 Chip
FPC 1 IA 1 TSensor
FPC 1 IA 1 Chip
FPC 2 Intake
FPC 2 Exhaust A
FPC 2 Exhaust B
FPC 2 I3 0 TSensor
FPC 2 I3 0 Chip
FPC 2 I3 1 TSensor
FPC 2 I3 1 Chip
FPC 2 I3 2 TSensor
FPC 2 I3 2 Chip
FPC 2 I3 3 TSensor
FPC 2 I3 3 Chip
FPC 2 IA 0 TSensor
FPC 2 IA 0 Chip
FPC 2 IA 1 TSensor
FPC 2 IA 1 Chip
Front Fan
Middle Fan
Rear Fan
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
33 degrees C / 91 degrees F
38 degrees C / 100 degrees F
53 degrees C / 127 degrees F
50 degrees C / 122 degrees F
53 degrees C / 127 degrees F
49 degrees C / 120 degrees F
52 degrees C / 125 degrees F
47 degrees C / 116 degrees F
49 degrees C / 120 degrees F
44 degrees C / 111 degrees F
46 degrees C / 114 degrees F
45 degrees C / 113 degrees F
44 degrees C / 111 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
32 degrees C / 89 degrees F
40 degrees C / 104 degrees F
52 degrees C / 125 degrees F
52 degrees C / 125 degrees F
56 degrees C / 132 degrees F
52 degrees C / 125 degrees F
55 degrees C / 131 degrees F
49 degrees C / 120 degrees F
52 degrees C / 125 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
50 degrees C / 122 degrees F
48 degrees C / 118 degrees F
47 degrees C / 116 degrees F
53 degrees C / 127 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Status
OK
OK
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
35 degrees C / 95 degrees F
40 degrees C / 104 degrees F
show chassis environment (MX480 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 0 ACBC
CB 0 SF A
CB 0 SF B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 SF A
CB 1 SF B
FPC 0 Intake
FPC 0 Exhaust A
FPC 0 Exhaust B
FPC 0 I3 0 TSensor
FPC 0 I3 0 Chip
Copyright © 2013, Juniper Networks, Inc.
44
45
36
38
39
37
51
44
36
39
40
37
50
43
36
39
51
49
56
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
111 degrees F
113 degrees F
96 degrees F
100 degrees F
102 degrees F
98 degrees F
123 degrees F
111 degrees F
96 degrees F
102 degrees F
104 degrees F
98 degrees F
122 degrees F
109 degrees F
96 degrees F
102 degrees F
123 degrees F
120 degrees F
132 degrees F
193
PTX Series Packet Transport Switch Software Documentation
Fans
FPC 0 I3 1 TSensor
FPC 0 I3 1 Chip
FPC 0 I3 2 TSensor
FPC 0 I3 2 Chip
FPC 0 I3 3 TSensor
FPC 0 I3 3 Chip
FPC 0 IA 0 TSensor
FPC 0 IA 0 Chip
FPC 0 IA 1 TSensor
FPC 0 IA 1 Chip
FPC 1 Intake
FPC 1 Exhaust A
FPC 1 Exhaust B
FPC 1 I3 0 TSensor
FPC 1 I3 0 Chip
FPC 1 I3 1 TSensor
FPC 1 I3 1 Chip
FPC 1 I3 2 TSensor
FPC 1 I3 2 Chip
FPC 1 I3 3 TSensor
FPC 1 I3 3 Chip
FPC 1 IA 0 TSensor
FPC 1 IA 0 Chip
FPC 1 IA 1 TSensor
FPC 1 IA 1 Chip
Top Rear Fan
Bottom Rear Fan
Top Middle Fan
Bottom Middle Fan
Top Front Fan
Bottom Front Fan
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47 degrees C / 116 degrees F
52 degrees C / 125 degrees F
46 degrees C / 114 degrees F
48 degrees C / 118 degrees F
42 degrees C / 107 degrees F
45 degrees C / 113 degrees F
45 degrees C / 113 degrees F
45 degrees C / 113 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
37 degrees C / 98 degrees F
41 degrees C / 105 degrees F
52 degrees C / 125 degrees F
51 degrees C / 123 degrees F
57 degrees C / 134 degrees F
48 degrees C / 118 degrees F
52 degrees C / 125 degrees F
46 degrees C / 114 degrees F
50 degrees C / 122 degrees F
42 degrees C / 107 degrees F
46 degrees C / 114 degrees F
49 degrees C / 120 degrees F
48 degrees C / 118 degrees F
46 degrees C / 114 degrees F
50 degrees C / 122 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (MX480 Router with Enhanced MX SCB)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 0 ACBC
CB 0 XF A
CB 0 XF B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 XF A
CB 1 XF B
FPC 0 Intake
FPC 0 Exhaust A
FPC 0 Exhaust B
FPC 0 I3 0 TSensor
FPC 0 I3 0 Chip
FPC 0 I3 1 TSensor
FPC 0 I3 1 Chip
194
Status
OK
OK
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
35 degrees C / 95 degrees F
40 degrees C / 104 degrees F
44
45
36
38
39
37
51
44
36
39
40
37
50
43
36
39
51
49
56
47
52
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
111 degrees F
113 degrees F
96 degrees F
100 degrees F
102 degrees F
98 degrees F
123 degrees F
111 degrees F
96 degrees F
102 degrees F
104 degrees F
98 degrees F
122 degrees F
109 degrees F
96 degrees F
102 degrees F
123 degrees F
120 degrees F
132 degrees F
116 degrees F
125 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
FPC 0 I3 2 TSensor
FPC 0 I3 2 Chip
FPC 0 I3 3 TSensor
FPC 0 I3 3 Chip
FPC 0 IA 0 TSensor
FPC 0 IA 0 Chip
FPC 0 IA 1 TSensor
FPC 0 IA 1 Chip
FPC 1 Intake
FPC 1 Exhaust A
FPC 1 Exhaust B
FPC 1 I3 0 TSensor
FPC 1 I3 0 Chip
FPC 1 I3 1 TSensor
FPC 1 I3 1 Chip
FPC 1 I3 2 TSensor
FPC 1 I3 2 Chip
FPC 1 I3 3 TSensor
FPC 1 I3 3 Chip
FPC 1 IA 0 TSensor
FPC 1 IA 0 Chip
FPC 1 IA 1 TSensor
FPC 1 IA 1 Chip
Top Rear Fan
Bottom Rear Fan
Top Middle Fan
Bottom Middle Fan
Top Front Fan
Bottom Front Fan
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
46 degrees C / 114 degrees F
48 degrees C / 118 degrees F
42 degrees C / 107 degrees F
45 degrees C / 113 degrees F
45 degrees C / 113 degrees F
45 degrees C / 113 degrees F
44 degrees C / 111 degrees F
48 degrees C / 118 degrees F
37 degrees C / 98 degrees F
41 degrees C / 105 degrees F
52 degrees C / 125 degrees F
51 degrees C / 123 degrees F
57 degrees C / 134 degrees F
48 degrees C / 118 degrees F
52 degrees C / 125 degrees F
46 degrees C / 114 degrees F
50 degrees C / 122 degrees F
42 degrees C / 107 degrees F
46 degrees C / 114 degrees F
49 degrees C / 120 degrees F
48 degrees C / 118 degrees F
46 degrees C / 114 degrees F
50 degrees C / 122 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Status
Absent
Absent
Check
OK
OK
Absent
OK
OK
OK
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
Absent
OK
OK
OK
OK
OK
OK
Measurement
show chassis environment (MX960 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 1
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 SF A
CB 1 SF B
CB 2 Intake
CB 2 Exhaust A
CB 2 Exhaust B
CB 2 ACBC
CB 2 SF A
CB 2 SF B
FPC 4 Intake
FPC 4 Exhaust A
FPC 4 Exhaust B
FPC 7 Intake
FPC 7 Exhaust A
FPC 7 Exhaust B
Copyright © 2013, Juniper Networks, Inc.
35 degrees C / 95 degrees F
37 degrees C / 98 degrees F
24 degrees C / 75 degrees F
30 degrees C / 86 degrees F
27 degrees C / 80 degrees F
24
36
38
24
36
42
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
/
/
/
/
/
/
75 degrees F
96 degrees F
100 degrees F
75 degrees F
96 degrees F
107 degrees F
195
PTX Series Packet Transport Switch Software Documentation
Fans
Top Fan Tray Temp
Top Tray Fan 1
Top Tray Fan 2
Top Tray Fan 3
Top Tray Fan 4
Top Tray Fan 5
Top Tray Fan 6
Bottom Fan Tray Temp
Bottom Tray Fan 1
Bottom Tray Fan 2
Bottom Tray Fan 3
Bottom Tray Fan 4
Bottom Tray Fan 5
Bottom Tray Fan 6
Failed
OK
OK
OK
OK
OK
OK
Failed
OK
OK
OK
OK
OK
OK
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
show chassis environment (MX960 Router with Enhanced MX SCB)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
PEM 2
PEM 3
Routing Engine 0
Routing Engine 0 CPU
Routing Engine 1
Routing Engine 1 CPU
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 0 ACBC
CB 0 XF A
CB 0 XF B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
CB 1 ACBC
CB 1 XF A
CB 1 XF B
CB 2 Intake
CB 2 Exhaust A
CB 2 Exhaust B
CB 2 ACBC
CB 2 XF A
CB 2 XF B
FPC 0 Intake
FPC 0 Exhaust A
FPC 0 Exhaust B
FPC 0 I3 0 TSensor
FPC 0 I3 0 Chip
FPC 0 I3 1 TSensor
FPC 0 I3 1 Chip
FPC 0 I3 2 TSensor
FPC 0 I3 2 Chip
FPC 0 I3 3 TSensor
FPC 0 I3 3 Chip
FPC 0 IA 0 TSensor
FPC 0 IA 0 Chip
FPC 0 IA 1 TSensor
FPC 0 IA 1 Chip
FPC 1 Intake
196
Status
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
50
50
50
42
51
39
44
35
36
43
38
53
47
35
35
41
38
52
47
32
30
35
33
51
50
35
39
50
50
56
47
50
45
48
41
44
45
45
44
48
36
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
122 degrees F
122 degrees F
122 degrees F
107 degrees F
123 degrees F
102 degrees F
111 degrees F
95 degrees F
96 degrees F
109 degrees F
100 degrees F
127 degrees F
116 degrees F
95 degrees F
95 degrees F
105 degrees F
100 degrees F
125 degrees F
116 degrees F
89 degrees F
86 degrees F
95 degrees F
91 degrees F
123 degrees F
122 degrees F
95 degrees F
102 degrees F
122 degrees F
122 degrees F
132 degrees F
116 degrees F
122 degrees F
113 degrees F
118 degrees F
105 degrees F
111 degrees F
113 degrees F
113 degrees F
111 degrees F
118 degrees F
96 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
7
7
7
7
Exhaust A
Exhaust B
LU 0 TCAM TSensor
LU 0 TCAM Chip
LU 0 TSensor
LU 0 Chip
MQ 0 TSensor
MQ 0 Chip
LU 1 TCAM TSensor
LU 1 TCAM Chip
LU 1 TSensor
LU 1 Chip
MQ 1 TSensor
MQ 1 Chip
Intake
Exhaust A
Exhaust B
I3 0 TSensor
I3 0 Chip
I3 1 TSensor
I3 1 Chip
I3 2 TSensor
I3 2 Chip
I3 3 TSensor
I3 3 Chip
IA 0 TSensor
IA 0 Chip
IA 1 TSensor
IA 1 Chip
Intake
Exhaust A
Exhaust B
I3 0 TSensor
I3 0 Chip
I3 1 TSensor
I3 1 Chip
IA 0 TSensor
IA 0 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSensor
LU 0 Chip
LU 1 TSensor
LU 1 Chip
LU 2 TSensor
LU 2 Chip
LU 3 TSensor
LU 3 Chip
MQ 0 TSensor
MQ 0 Chip
MQ 1 TSensor
MQ 1 Chip
MQ 2 TSensor
MQ 2 Chip
MQ 3 TSensor
MQ 3 Chip
Intake
Exhaust A
Exhaust B
QX 0 TSensor
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47
43
53
57
53
60
53
56
51
52
51
53
51
58
35
39
54
52
59
48
52
47
49
41
44
47
46
45
49
34
34
47
48
52
46
48
41
40
42
42
53
53
54
53
61
53
51
53
53
47
52
47
52
47
46
47
45
36
35
33
42
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
116 degrees F
109 degrees F
127 degrees F
134 degrees F
127 degrees F
140 degrees F
127 degrees F
132 degrees F
123 degrees F
125 degrees F
123 degrees F
127 degrees F
123 degrees F
136 degrees F
95 degrees F
102 degrees F
129 degrees F
125 degrees F
138 degrees F
118 degrees F
125 degrees F
116 degrees F
120 degrees F
105 degrees F
111 degrees F
116 degrees F
114 degrees F
113 degrees F
120 degrees F
93 degrees F
93 degrees F
116 degrees F
118 degrees F
125 degrees F
114 degrees F
118 degrees F
105 degrees F
104 degrees F
107 degrees F
107 degrees F
127 degrees F
127 degrees F
129 degrees F
127 degrees F
141 degrees F
127 degrees F
123 degrees F
127 degrees F
127 degrees F
116 degrees F
125 degrees F
116 degrees F
125 degrees F
116 degrees F
114 degrees F
116 degrees F
113 degrees F
96 degrees F
95 degrees F
91 degrees F
107 degrees F
197
PTX Series Packet Transport Switch Software Documentation
Fans
FPC 7 QX 0 Chip
FPC 7 LU 0 TCAM TSensor
FPC 7 LU 0 TCAM Chip
FPC 7 LU 0 TSensor
FPC 7 LU 0 Chip
FPC 7 MQ 0 TSensor
FPC 7 MQ 0 Chip
FPC 8 Intake
FPC 8 Exhaust A
FPC 8 Exhaust B
FPC 8 I3 0 TSensor
FPC 8 I3 0 Chip
FPC 8 BDS 0 TSensor
FPC 8 BDS 0 Chip
FPC 8 IA 0 TSensor
FPC 8 IA 0 Chip
FPC 10 Intake
FPC 10 Exhaust A
FPC 10 Exhaust B
FPC 10 I3 0 TSensor
FPC 10 I3 0 Chip
FPC 10 I3 1 TSensor
FPC 10 I3 1 Chip
FPC 10 I3 2 TSensor
FPC 10 I3 2 Chip
FPC 10 I3 3 TSensor
FPC 10 I3 3 Chip
FPC 10 IA 0 TSensor
FPC 10 IA 0 Chip
FPC 10 IA 1 TSensor
FPC 10 IA 1 Chip
Top Fan Tray Temp
Top Tray Fan 1
Top Tray Fan 2
Top Tray Fan 3
Top Tray Fan 4
Top Tray Fan 5
Top Tray Fan 6
Bottom Fan Tray Temp
Bottom Tray Fan 1
Bottom Tray Fan 2
Bottom Tray Fan 3
Bottom Tray Fan 4
Bottom Tray Fan 5
Bottom Tray Fan 6
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47 degrees C / 116 degrees F
42 degrees C / 107 degrees F
44 degrees C / 111 degrees F
42 degrees C / 107 degrees F
46 degrees C / 114 degrees F
42 degrees C / 107 degrees F
45 degrees C / 113 degrees F
33 degrees C / 91 degrees F
33 degrees C / 91 degrees F
36 degrees C / 96 degrees F
38 degrees C / 100 degrees F
43 degrees C / 109 degrees F
37 degrees C / 98 degrees F
36 degrees C / 96 degrees F
37 degrees C / 98 degrees F
37 degrees C / 98 degrees F
38 degrees C / 100 degrees F
36 degrees C / 96 degrees F
41 degrees C / 105 degrees F
40 degrees C / 104 degrees F
42 degrees C / 107 degrees F
40 degrees C / 104 degrees F
44 degrees C / 111 degrees F
42 degrees C / 107 degrees F
43 degrees C / 109 degrees F
39 degrees C / 102 degrees F
44 degrees C / 111 degrees F
36 degrees C / 96 degrees F
36 degrees C / 96 degrees F
43 degrees C / 109 degrees F
42 degrees C / 107 degrees F
37 degrees C / 98 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
28 degrees C / 82 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Status
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
Absent
Absent
Measurement
show chassis environment (MX2020 Router)
user@host> show chassis environment
Class Item
Temp PSM 0
PSM 1
PSM 2
PSM 3
PSM 4
PSM 5
PSM 6
PSM 7
PSM 8
PSM 9
PSM 10
198
41
39
39
38
38
38
37
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
/
/
/
/
/
/
/
105 degrees F
102 degrees F
102 degrees F
100 degrees F
100 degrees F
100 degrees F
98 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PSM 11
PSM 12
PSM 13
PSM 14
PSM 15
PSM 16
PSM 17
PDM 0
PDM 1
PDM 2
PDM 3
CB 0 IntakeA-Zone0
CB 0 IntakeB-Zone1
CB 0 IntakeC-Zone0
CB 0 ExhaustA-Zone0
CB 0 ExhaustB-Zone1
CB 0 TCBC-Zone0
CB 1 IntakeA-Zone0
CB 1 IntakeB-Zone1
CB 1 IntakeC-Zone0
CB 1 ExhaustA-Zone0
CB 1 ExhaustB-Zone1
CB 1 TCBC-Zone0
SPMB 0 Intake
SPMB 1 Intake
Routing Engine 0
Routing Engine 0 CPU
Routing Engine 1
Routing Engine 1 CPU
SFB 0 Intake-Zone0
SFB 0 Exhaust-Zone1
SFB 0 IntakeA-Zone0
SFB 0 IntakeB-Zone1
SFB 0 Exhaust-Zone0
SFB 0 SFB-XF2-Zone1
SFB 0 SFB-XF1-Zone0
SFB 0 SFB-XF0-Zone0
SFB 1 Intake-Zone0
SFB 1 Exhaust-Zone1
SFB 1 IntakeA-Zone0
SFB 1 IntakeB-Zone1
SFB 1 Exhaust-Zone0
SFB 1 SFB-XF2-Zone1
SFB 1 SFB-XF1-Zone0
SFB 1 SFB-XF0-Zone0
SFB 2 Intake-Zone0
SFB 2 Exhaust-Zone1
SFB 2 IntakeA-Zone0
SFB 2 IntakeB-Zone1
SFB 2 Exhaust-Zone0
SFB 2 SFB-XF2-Zone1
SFB 2 SFB-XF1-Zone0
SFB 2 SFB-XF0-Zone0
SFB 3 Intake-Zone0
SFB 3 Exhaust-Zone1
SFB 3 IntakeA-Zone0
SFB 3 IntakeB-Zone1
SFB 3 Exhaust-Zone0
SFB 3 SFB-XF2-Zone1
SFB 3 SFB-XF1-Zone0
SFB 3 SFB-XF0-Zone0
Copyright © 2013, Juniper Networks, Inc.
OK
OK
OK
OK
OK
OK
OK
OK
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47
45
44
44
43
42
41
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
/
/
/
/
/
/
/
116
113
111
111
109
107
105
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
45
34
48
45
37
41
46
42
49
46
41
46
33
42
35
34
44
42
55
48
50
40
52
61
69
68
56
47
51
40
51
62
67
69
56
47
51
40
53
65
69
70
57
48
52
41
53
66
69
71
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
113 degrees F
93 degrees F
118 degrees F
113 degrees F
98 degrees F
105 degrees F
114 degrees F
107 degrees F
120 degrees F
114 degrees F
105 degrees F
114 degrees F
91 degrees F
107 degrees F
95 degrees F
93 degrees F
111 degrees F
107 degrees F
131 degrees F
118 degrees F
122 degrees F
104 degrees F
125 degrees F
141 degrees F
156 degrees F
154 degrees F
132 degrees F
116 degrees F
123 degrees F
104 degrees F
123 degrees F
143 degrees F
152 degrees F
156 degrees F
132 degrees F
116 degrees F
123 degrees F
104 degrees F
127 degrees F
149 degrees F
156 degrees F
158 degrees F
134 degrees F
118 degrees F
125 degrees F
105 degrees F
127 degrees F
150 degrees F
156 degrees F
159 degrees F
199
PTX Series Packet Transport Switch Software Documentation
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
200
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
58
49
54
42
53
64
68
71
58
50
53
43
54
66
69
74
58
49
53
43
53
65
68
72
57
50
53
43
54
68
69
73
41
48
62
59
62
59
64
59
53
59
53
47
49
47
51
47
44
47
45
40
49
58
55
56
55
58
55
49
55
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
136
120
129
107
127
147
154
159
136
122
127
109
129
150
156
165
136
120
127
109
127
149
154
161
134
122
127
109
129
154
156
163
105
118
143
138
143
138
147
138
127
138
127
116
120
116
123
116
111
116
113
104
120
136
131
132
131
136
131
120
131
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
51
47
48
47
50
47
44
47
44
39
49
61
58
60
58
65
58
51
58
53
47
50
47
52
47
45
47
46
40
49
61
58
61
58
62
58
51
58
53
48
50
48
54
48
45
48
48
40
49
62
59
62
59
65
59
51
59
53
48
52
48
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
123
116
118
116
122
116
111
116
111
102
120
141
136
140
136
149
136
123
136
127
116
122
116
125
116
113
116
114
104
120
141
136
141
136
143
136
123
136
127
118
122
118
129
118
113
118
118
104
120
143
138
143
138
149
138
123
138
127
118
125
118
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
201
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
202
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
53
48
46
48
47
41
50
63
60
63
60
66
60
56
60
54
49
52
49
53
49
48
49
47
42
51
63
61
64
61
66
61
56
61
56
50
56
50
59
50
49
50
49
41
51
63
60
61
60
65
60
54
60
53
50
53
50
54
50
47
50
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
127
118
114
118
116
105
122
145
140
145
140
150
140
132
140
129
120
125
120
127
120
118
120
116
107
123
145
141
147
141
150
141
132
141
132
122
132
122
138
122
120
122
120
105
123
145
140
141
140
149
140
129
140
127
122
127
122
129
122
116
122
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
7 MQ 3 Chip
8 Intake
8 Exhaust A
8 Exhaust B
8 LU 0 TSen
8 LU 0 Chip
8 LU 1 TSen
8 LU 1 Chip
8 LU 2 TSen
8 LU 2 Chip
8 LU 3 TSen
8 LU 3 Chip
8 MQ 0 TSen
8 MQ 0 Chip
8 MQ 1 TSen
8 MQ 1 Chip
8 MQ 2 TSen
8 MQ 2 Chip
8 MQ 3 TSen
8 MQ 3 Chip
9 Intake
9 Exhaust A
9 Exhaust B
9 LU 0 TSen
9 LU 0 Chip
9 LU 1 TSen
9 LU 1 Chip
9 LU 2 TSen
9 LU 2 Chip
9 LU 3 TSen
9 LU 3 Chip
9 MQ 0 TSen
9 MQ 0 Chip
9 MQ 1 TSen
9 MQ 1 Chip
9 MQ 2 TSen
9 MQ 2 Chip
9 MQ 3 TSen
9 MQ 3 Chip
10 Intake
10 Exhaust A
10 Exhaust B
10 LU 0 TSen
10 LU 0 Chip
10 LU 1 TSen
10 LU 1 Chip
10 LU 2 TSen
10 LU 2 Chip
10 LU 3 TSen
10 LU 3 Chip
10 MQ 0 TSen
10 MQ 0 Chip
10 MQ 1 TSen
10 MQ 1 Chip
10 MQ 2 TSen
10 MQ 2 Chip
10 MQ 3 TSen
10 MQ 3 Chip
11 Intake
11 Exhaust A
11 Exhaust B
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47
41
50
62
59
62
59
64
59
55
59
54
49
51
49
52
49
46
49
47
42
51
63
60
65
60
67
60
54
60
54
51
55
51
59
51
49
51
49
44
49
55
54
55
54
59
54
52
54
51
48
49
48
52
48
47
48
47
30
35
30
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
116 degrees F
105 degrees F
122 degrees F
143 degrees F
138 degrees F
143 degrees F
138 degrees F
147 degrees F
138 degrees F
131 degrees F
138 degrees F
129 degrees F
120 degrees F
123 degrees F
120 degrees F
125 degrees F
120 degrees F
114 degrees F
120 degrees F
116 degrees F
107 degrees F
123 degrees F
145 degrees F
140 degrees F
149 degrees F
140 degrees F
152 degrees F
140 degrees F
129 degrees F
140 degrees F
129 degrees F
123 degrees F
131 degrees F
123 degrees F
138 degrees F
123 degrees F
120 degrees F
123 degrees F
120 degrees F
111 degrees F
120 degrees F
131 degrees F
129 degrees F
131 degrees F
129 degrees F
138 degrees F
129 degrees F
125 degrees F
129 degrees F
123 degrees F
118 degrees F
120 degrees F
118 degrees F
125 degrees F
118 degrees F
116 degrees F
118 degrees F
116 degrees F
86 degrees F
95 degrees F
86 degrees F
203
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
204
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
57
58
57
62
57
53
57
54
52
52
52
57
52
48
52
52
40
47
52
51
52
51
55
51
47
51
50
46
46
46
50
46
44
46
46
40
48
52
51
52
51
55
51
48
51
48
46
46
46
50
46
44
46
46
40
50
51
50
50
50
54
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
134
136
134
143
134
127
134
129
125
125
125
134
125
118
125
125
104
116
125
123
125
123
131
123
116
123
122
114
114
114
122
114
111
114
114
104
118
125
123
125
123
131
123
118
123
118
114
114
114
122
114
111
114
114
104
122
123
122
122
122
129
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
14
14
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
17
17
17
17
17
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
XM 0 TSen
XM 0 Chip
XF 0 TSen
XF 0 Chip
PLX Switch TSen
PLX Switch Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
50
47
50
49
47
46
47
51
47
45
47
48
44
49
60
50
56
50
50
50
58
50
63
50
56
50
68
50
56
42
51
53
51
52
51
55
51
48
51
49
49
48
49
53
49
46
49
49
43
51
55
54
57
54
60
54
53
54
53
49
50
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
122
116
122
120
116
114
116
123
116
113
116
118
111
120
140
122
132
122
122
122
136
122
145
122
132
122
154
122
132
107
123
127
123
125
123
131
123
118
123
120
120
118
120
127
120
114
120
120
109
123
131
129
134
129
140
129
127
129
127
120
122
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
205
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
206
17 MQ 1 TSen
17 MQ 1 Chip
17 MQ 2 TSen
17 MQ 2 Chip
17 MQ 3 TSen
17 MQ 3 Chip
18 Intake
18 Exhaust A
18 Exhaust B
18 LU 0 TSen
18 LU 0 Chip
18 LU 1 TSen
18 LU 1 Chip
18 LU 2 TSen
18 LU 2 Chip
18 LU 3 TSen
18 LU 3 Chip
18 MQ 0 TSen
18 MQ 0 Chip
18 MQ 1 TSen
18 MQ 1 Chip
18 MQ 2 TSen
18 MQ 2 Chip
18 MQ 3 TSen
18 MQ 3 Chip
19 Intake
19 Exhaust A
19 Exhaust B
19 LU 0 TSen
19 LU 0 Chip
19 LU 1 TSen
19 LU 1 Chip
19 LU 2 TSen
19 LU 2 Chip
19 LU 3 TSen
19 LU 3 Chip
19 MQ 0 TSen
19 MQ 0 Chip
19 MQ 1 TSen
19 MQ 1 Chip
19 MQ 2 TSen
19 MQ 2 Chip
19 MQ 3 TSen
19 MQ 3 Chip
0 Intake
0 Exhaust
0 ADC-XF1
0 ADC-XF0
1 Intake
1 Exhaust
1 ADC-XF1
1 ADC-XF0
2 Intake
2 Exhaust
2 ADC-XF1
2 ADC-XF0
3 Intake
3 Exhaust
3 ADC-XF1
3 ADC-XF0
4 Intake
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
49
54
49
47
49
51
44
53
57
56
57
56
62
56
53
56
55
51
54
51
58
51
50
51
53
48
56
64
63
64
63
70
63
61
63
62
56
60
56
62
56
56
56
57
40
52
59
66
38
50
59
63
37
52
53
61
40
51
61
64
39
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
120 degrees F
129 degrees F
120 degrees F
116 degrees F
120 degrees F
123 degrees F
111 degrees F
127 degrees F
134 degrees F
132 degrees F
134 degrees F
132 degrees F
143 degrees F
132 degrees F
127 degrees F
132 degrees F
131 degrees F
123 degrees F
129 degrees F
123 degrees F
136 degrees F
123 degrees F
122 degrees F
123 degrees F
127 degrees F
118 degrees F
132 degrees F
147 degrees F
145 degrees F
147 degrees F
145 degrees F
158 degrees F
145 degrees F
141 degrees F
145 degrees F
143 degrees F
132 degrees F
140 degrees F
132 degrees F
143 degrees F
132 degrees F
132 degrees F
132 degrees F
134 degrees F
104 degrees F
125 degrees F
138 degrees F
150 degrees F
100 degrees F
122 degrees F
138 degrees F
145 degrees F
98 degrees F
125 degrees F
127 degrees F
141 degrees F
104 degrees F
123 degrees F
141 degrees F
147 degrees F
102 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
Fan
Fan
Copyright © 2013, Juniper Networks, Inc.
4 Exhaust
4 ADC-XF1
4 ADC-XF0
5 Intake
5 Exhaust
5 ADC-XF1
5 ADC-XF0
6 Intake
6 Exhaust
6 ADC-XF1
6 ADC-XF0
7 Intake
7 Exhaust
7 ADC-XF1
7 ADC-XF0
8 Intake
8 Exhaust
8 ADC-XF1
8 ADC-XF0
9 Intake
9 Exhaust
9 ADC-XF1
9 ADC-XF0
10 Intake
10 Exhaust
10 ADC-XF1
10 ADC-XF0
12 Intake
12 Exhaust
12 ADC-XF1
12 ADC-XF0
13 Intake
13 Exhaust
13 ADC-XF1
13 ADC-XF0
14 Intake
14 Exhaust
14 ADC-XF1
14 ADC-XF0
15 Intake
15 Exhaust
15 ADC-XF1
15 ADC-XF0
16 Intake
16 Exhaust
16 ADC-XF1
16 ADC-XF0
17 Intake
17 Exhaust
17 ADC-XF1
17 ADC-XF0
18 Intake
18 Exhaust
18 ADC-XF1
18 ADC-XF0
19 Intake
19 Exhaust
19 ADC-XF1
19 ADC-XF0
Tray 0 Fan 1
Tray 0 Fan 2
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
51 degrees
60 degrees
63 degrees
38 degrees
54 degrees
56 degrees
67 degrees
39 degrees
52 degrees
59 degrees
66 degrees
39 degrees
54 degrees
62 degrees
70 degrees
39 degrees
52 degrees
61 degrees
65 degrees
41 degrees
51 degrees
63 degrees
63 degrees
48 degrees
53 degrees
67 degrees
66 degrees
49 degrees
54 degrees
67 degrees
67 degrees
49 degrees
57 degrees
66 degrees
69 degrees
51 degrees
59 degrees
69 degrees
74 degrees
50 degrees
59 degrees
68 degrees
69 degrees
52 degrees
58 degrees
68 degrees
70 degrees
52 degrees
59 degrees
69 degrees
71 degrees
53 degrees
59 degrees
68 degrees
73 degrees
50 degrees
59 degrees
68 degrees
72 degrees
7440 RPM
7200 RPM
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
123
140
145
100
129
132
152
102
125
138
150
102
129
143
158
102
125
141
149
105
123
145
145
118
127
152
150
120
129
152
152
120
134
150
156
123
138
156
165
122
138
154
156
125
136
154
158
125
138
156
159
127
138
154
163
122
138
154
161
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
207
PTX Series Packet Transport Switch Software Documentation
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
0
0
0
0
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
6960
7200
7080
6840
6840
6960
6960
7080
6960
6960
8640
8640
8760
8760
8640
8640
8520
8520
8640
8640
8520
8520
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
7 degrees C
7 degrees C
7 degrees C
6 degrees C
6 degrees C
6 degrees C
6 degrees C
7 degrees C
7 degrees C
show chassis environment (MX2010 Router)
user@host> show chassis environment
Class Item
Temp PSM 0
PSM 1
PSM 2
PSM 3
PSM 4
PSM 5
PSM 6
PSM 7
PSM 8
PDM 0
PDM 1
CB 0 IntakeA-Zone0
CB 0 IntakeB-Zone1
CB 0 IntakeC-Zone0
CB 0 ExhaustA-Zone0
CB 0 ExhaustB-Zone1
CB 0 TCBC-Zone0
CB 1 IntakeA-Zone0
CB 1 IntakeB-Zone1
CB 1 IntakeC-Zone0
CB 1 ExhaustA-Zone0
CB 1 ExhaustB-Zone1
CB 1 TCBC-Zone0
SPMB 0 Intake
SPMB 1 Intake
Routing Engine 0
Routing Engine 0 CPU
Routing Engine 1
Routing Engine 1 CPU
SFB 0 Intake-Zone0
SFB 0 Exhaust-Zone1
SFB 0 IntakeA-Zone0
SFB 0 IntakeB-Zone1
SFB 0 Exhaust-Zone0
208
/
/
/
/
/
/
/
/
/
44
44
44
42
42
42
42
44
44
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
14 degrees C / 57 degrees F
7 degrees C / 44 degrees F
22 degrees C / 71 degrees F
14 degrees C / 57 degrees F
9 degrees C / 48 degrees F
11 degrees C / 51 degrees F
9 degrees C / 48 degrees F
5 degrees C / 41 degrees F
20 degrees C / 68 degrees F
12 degrees C / 53 degrees F
7 degrees C / 44 degrees F
10 degrees C / 50 degrees F
5 degrees C / 41 degrees F
4 degrees C / 39 degrees F
9 degrees C / 48 degrees F
9 degrees C / 48 degrees F
6 degrees C / 42 degrees F
6 degrees C / 42 degrees F
26 degrees C / 78 degrees F
17 degrees C / 62 degrees F
16 degrees C / 60 degrees F
11 degrees C / 51 degrees F
18 degrees C / 64 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SFB 0 SFB-XF2-Zone1
SFB 0 SFB-XF1-Zone0
SFB 0 SFB-XF0-Zone0
SFB 1 Intake-Zone0
SFB 1 Exhaust-Zone1
SFB 1 IntakeA-Zone0
SFB 1 IntakeB-Zone1
SFB 1 Exhaust-Zone0
SFB 1 SFB-XF2-Zone1
SFB 1 SFB-XF1-Zone0
SFB 1 SFB-XF0-Zone0
SFB 2 Intake-Zone0
SFB 2 Exhaust-Zone1
SFB 2 IntakeA-Zone0
SFB 2 IntakeB-Zone1
SFB 2 Exhaust-Zone0
SFB 2 SFB-XF2-Zone1
SFB 2 SFB-XF1-Zone0
SFB 2 SFB-XF0-Zone0
SFB 4 Intake-Zone0
SFB 4 Exhaust-Zone1
SFB 4 IntakeA-Zone0
SFB 4 IntakeB-Zone1
SFB 4 Exhaust-Zone0
SFB 4 SFB-XF2-Zone1
SFB 4 SFB-XF1-Zone0
SFB 4 SFB-XF0-Zone0
SFB 5 Intake-Zone0
SFB 5 Exhaust-Zone1
SFB 5 IntakeA-Zone0
SFB 5 IntakeB-Zone1
SFB 5 Exhaust-Zone0
SFB 5 SFB-XF2-Zone1
SFB 5 SFB-XF1-Zone0
SFB 5 SFB-XF0-Zone0
SFB 6 Intake-Zone0
SFB 6 Exhaust-Zone1
SFB 6 IntakeA-Zone0
SFB 6 IntakeB-Zone1
SFB 6 Exhaust-Zone0
SFB 6 SFB-XF2-Zone1
SFB 6 SFB-XF1-Zone0
SFB 6 SFB-XF0-Zone0
SFB 7 Intake-Zone0
SFB 7 Exhaust-Zone1
SFB 7 IntakeA-Zone0
SFB 7 IntakeB-Zone1
SFB 7 Exhaust-Zone0
SFB 7 SFB-XF2-Zone1
SFB 7 SFB-XF1-Zone0
SFB 7 SFB-XF0-Zone0
FPC 0 Intake
FPC 0 Exhaust A
FPC 0 Exhaust B
FPC 0 LU 0 TSen
FPC 0 LU 0 Chip
FPC 0 LU 1 TSen
FPC 0 LU 1 Chip
FPC 0 LU 2 TSen
FPC 0 LU 2 Chip
FPC 0 LU 3 TSen
Copyright © 2013, Juniper Networks, Inc.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
25 degrees C / 77 degrees F
23 degrees C / 73 degrees F
33 degrees C / 91 degrees F
27 degrees C / 80 degrees F
15 degrees C / 59 degrees F
20 degrees C / 68 degrees F
10 degrees C / 50 degrees F
19 degrees C / 66 degrees F
26 degrees C / 78 degrees F
27 degrees C / 80 degrees F
32 degrees C / 89 degrees F
21 degrees C / 69 degrees F
13 degrees C / 55 degrees F
18 degrees C / 64 degrees F
9 degrees C / 48 degrees F
16 degrees C / 60 degrees F
24 degrees C / 75 degrees F
21 degrees C / 69 degrees F
26 degrees C / 78 degrees F
28 degrees C / 82 degrees F
16 degrees C / 60 degrees F
18 degrees C / 64 degrees F
11 degrees C / 51 degrees F
19 degrees C / 66 degrees F
27 degrees C / 80 degrees F
27 degrees C / 80 degrees F
32 degrees C / 89 degrees F
22 degrees C / 71 degrees F
14 degrees C / 57 degrees F
18 degrees C / 64 degrees F
10 degrees C / 50 degrees F
17 degrees C / 62 degrees F
22 degrees C / 71 degrees F
29 degrees C / 84 degrees F
27 degrees C / 80 degrees F
27 degrees C / 80 degrees F
13 degrees C / 55 degrees F
19 degrees C / 66 degrees F
10 degrees C / 50 degrees F
20 degrees C / 68 degrees F
24 degrees C / 75 degrees F
32 degrees C / 89 degrees F
33 degrees C / 91 degrees F
25 degrees C / 77 degrees F
13 degrees C / 55 degrees F
14 degrees C / 57 degrees F
8 degrees C / 46 degrees F
17 degrees C / 62 degrees F
21 degrees C / 69 degrees F
21 degrees C / 69 degrees F
33 degrees C / 91 degrees F
13 degrees C / 55 degrees F
13 degrees C / 55 degrees F
14 degrees C / 57 degrees F
28 degrees C / 82 degrees F
25 degrees C / 77 degrees F
28 degrees C / 82 degrees F
27 degrees C / 80 degrees F
28 degrees C / 82 degrees F
19 degrees C / 66 degrees F
28 degrees C / 82 degrees F
209
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC 1 PLX
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
210
0 LU 3 Chip
0 XM 0 TSen
0 XM 0 Chip
0 XM 1 TSen
0 XM 1 Chip
0 PLX Switch
0 PLX Switch
1 Intake
1 Exhaust A
1 Exhaust B
1 LU 0 TSen
1 LU 0 Chip
1 LU 1 TSen
1 LU 1 Chip
1 LU 2 TSen
1 LU 2 Chip
1 LU 3 TSen
1 LU 3 Chip
1 XM 0 TSen
1 XM 0 Chip
1 XF 0 TSen
1 XF 0 Chip
1 PLX Switch
Switch Chip
2 Intake
2 Exhaust A
2 Exhaust B
2 LU 0 TSen
2 LU 0 Chip
2 LU 1 TSen
2 LU 1 Chip
2 LU 2 TSen
2 LU 2 Chip
2 LU 3 TSen
2 LU 3 Chip
2 XM 0 TSen
2 XM 0 Chip
2 XM 1 TSen
2 XM 1 Chip
2 PLX Switch
2 PLX Switch
3 Intake
3 Exhaust A
3 Exhaust B
3 LU 0 TSen
3 LU 0 Chip
3 LU 1 TSen
3 LU 1 Chip
3 LU 2 TSen
3 LU 2 Chip
3 LU 3 TSen
3 LU 3 Chip
3 MQ 0 TSen
3 MQ 0 Chip
3 MQ 1 TSen
3 MQ 1 Chip
3 MQ 2 TSen
3 MQ 2 Chip
3 MQ 3 TSen
3 MQ 3 Chip
4 Intake
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
TSen
Chip
TSen
OK
TSen
Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
23 degrees C / 73 degrees F
28 degrees C / 82 degrees F
33 degrees C / 91 degrees F
28 degrees C / 82 degrees F
26 degrees C / 78 degrees F
28 degrees C / 82 degrees F
26 degrees C / 78 degrees F
10 degrees C / 50 degrees F
24 degrees C / 75 degrees F
28 degrees C / 82 degrees F
22 degrees C / 71 degrees F
31 degrees C / 87 degrees F
22 degrees C / 71 degrees F
21 degrees C / 69 degrees F
22 degrees C / 71 degrees F
25 degrees C / 77 degrees F
22 degrees C / 71 degrees F
33 degrees C / 91 degrees F
22 degrees C / 71 degrees F
30 degrees C / 86 degrees F
22 degrees C / 71 degrees F
37 degrees C / 98 degrees F
22 degrees C / 71 degrees F
22 degrees C / 71 degrees F
9 degrees C / 48 degrees F
10 degrees C / 50 degrees F
10 degrees C / 50 degrees F
26 degrees C / 78 degrees F
25 degrees C / 77 degrees F
26 degrees C / 78 degrees F
26 degrees C / 78 degrees F
26 degrees C / 78 degrees F
17 degrees C / 62 degrees F
26 degrees C / 78 degrees F
22 degrees C / 71 degrees F
26 degrees C / 78 degrees F
34 degrees C / 93 degrees F
26 degrees C / 78 degrees F
26 degrees C / 78 degrees F
26 degrees C / 78 degrees F
20 degrees C / 68 degrees F
12 degrees C / 53 degrees F
16 degrees C / 60 degrees F
26 degrees C / 78 degrees F
23 degrees C / 73 degrees F
26 degrees C / 78 degrees F
23 degrees C / 73 degrees F
27 degrees C / 80 degrees F
23 degrees C / 73 degrees F
22 degrees C / 71 degrees F
23 degrees C / 73 degrees F
21 degrees C / 69 degrees F
15 degrees C / 59 degrees F
18 degrees C / 64 degrees F
15 degrees C / 59 degrees F
20 degrees C / 68 degrees F
15 degrees C / 59 degrees F
17 degrees C / 62 degrees F
15 degrees C / 59 degrees F
16 degrees C / 60 degrees F
11 degrees C / 51 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC 4 Exhaust A
FPC 4 Exhaust B
FPC 4 LU 0 TSen
FPC 4 LU 0 Chip
FPC 4 LU 1 TSen
FPC 4 LU 1 Chip
FPC 4 LU 2 TSen
FPC 4 LU 2 Chip
FPC 4 LU 3 TSen
FPC 4 LU 3 Chip
FPC 4 XM 0 TSen
FPC 4 XM 0 Chip
FPC 4 XF 0 TSen
FPC 4 XF 0 Chip
FPC 4 PLX Switch
FPC 4 PLX Switch
FPC 5 Intake
FPC 5 Exhaust A
FPC 5 Exhaust B
FPC 5 LU 0 TSen
FPC 5 LU 0 Chip
FPC 5 LU 1 TSen
FPC 5 LU 1 Chip
FPC 5 LU 2 TSen
FPC 5 LU 2 Chip
FPC 5 LU 3 TSen
FPC 5 LU 3 Chip
FPC 5 XM 0 TSen
FPC 5 XM 0 Chip
FPC 5 XM 1 TSen
FPC 5 XM 1 Chip
FPC 5 PLX Switch
FPC 5 PLX Switch
FPC 6 Intake
FPC 6 Exhaust A
FPC 6 Exhaust B
FPC 6 LU 0 TSen
FPC 6 LU 0 Chip
FPC 6 LU 1 TSen
FPC 6 LU 1 Chip
FPC 6 LU 2 TSen
FPC 6 LU 2 Chip
FPC 6 LU 3 TSen
FPC 6 LU 3 Chip
FPC 6 MQ 0 TSen
FPC 6 MQ 0 Chip
FPC 6 MQ 1 TSen
FPC 6 MQ 1 Chip
FPC 6 MQ 2 TSen
FPC 6 MQ 2 Chip
FPC 6 MQ 3 TSen
FPC 6 MQ 3 Chip
FPC 7 Intake
FPC 7 Exhaust A
FPC 7 Exhaust B
FPC 7 LU 0 TSen
FPC 7 LU 0 Chip
FPC 7 LU 1 TSen
FPC 7 LU 1 Chip
FPC 7 LU 2 TSen
FPC 7 LU 2 Chip
Copyright © 2013, Juniper Networks, Inc.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
TSen
Chip
OK
TSen
Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
22 degrees C
28 degrees C
22 degrees C
33 degrees C
22 degrees C
21 degrees C
22 degrees C
26 degrees C
22 degrees C
33 degrees C
22 degrees C
30 degrees C
22 degrees C
37 degrees C
22 degrees C
23 degrees C
12 degrees C
12 degrees C
12 degrees C / 53
27 degrees C
28 degrees C
27 degrees C
27 degrees C
27 degrees C
19 degrees C
27 degrees C
22 degrees C
27 degrees C
36 degrees C
27 degrees C
26 degrees C
27 degrees C
24 degrees C
12 degrees C
17 degrees C
28 degrees C
24 degrees C
29 degrees C
24 degrees C
30 degrees C
24 degrees C
24 degrees C
24 degrees C
22 degrees C
16 degrees C
19 degrees C
16 degrees C
20 degrees C
16 degrees C
17 degrees C
16 degrees C
16 degrees C
10 degrees C
10 degrees C
11 degrees C
26 degrees C
26 degrees C
26 degrees C
29 degrees C
26 degrees C
19 degrees C
/ 71 degrees
/ 82 degrees
/ 71 degrees
/ 91 degrees
/ 71 degrees
/ 69 degrees
/ 71 degrees
/ 78 degrees
/ 71 degrees
/ 91 degrees
/ 71 degrees
/ 86 degrees
/ 71 degrees
/ 98 degrees
/ 71 degrees
/ 73 degrees
/ 53 degrees
/ 53 degrees
degrees F
/ 80 degrees
/ 82 degrees
/ 80 degrees
/ 80 degrees
/ 80 degrees
/ 66 degrees
/ 80 degrees
/ 71 degrees
/ 80 degrees
/ 96 degrees
/ 80 degrees
/ 78 degrees
/ 80 degrees
/ 75 degrees
/ 53 degrees
/ 62 degrees
/ 82 degrees
/ 75 degrees
/ 84 degrees
/ 75 degrees
/ 86 degrees
/ 75 degrees
/ 75 degrees
/ 75 degrees
/ 71 degrees
/ 60 degrees
/ 66 degrees
/ 60 degrees
/ 68 degrees
/ 60 degrees
/ 62 degrees
/ 60 degrees
/ 60 degrees
/ 50 degrees
/ 50 degrees
/ 51 degrees
/ 78 degrees
/ 78 degrees
/ 78 degrees
/ 84 degrees
/ 78 degrees
/ 66 degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
211
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC 8 LU
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
212
7
7
7
7
7
7
7
7
8
8
8
8
8
1
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
0
0
0
0
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
LU 3 TSen
LU 3 Chip
XM 0 TSen
XM 0 Chip
XM 1 TSen
XM 1 Chip
PLX Switch
PLX Switch
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
XM 0 TSen
XM 0 Chip
XF 0 TSen
XF 0 Chip
PLX Switch
PLX Switch
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
XM 0 TSen
XM 0 Chip
XM 1 TSen
XM 1 Chip
PLX Switch
PLX Switch
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
TSen
Chip
OK
TSen
Chip
TSen
Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
26 degrees C / 78 degrees F
24 degrees C / 75 degrees F
26 degrees C / 78 degrees F
34 degrees C / 93 degrees F
26 degrees C / 78 degrees F
32 degrees C / 89 degrees F
26 degrees C / 78 degrees F
22 degrees C / 71 degrees F
10 degrees C / 50 degrees F
22 degrees C / 71 degrees F
28 degrees C / 82 degrees F
20 degrees C / 68 degrees F
33 degrees C / 91 degrees F
20 degrees C / 68 degrees F
23 degrees C / 73 degrees F
20 degrees C / 68 degrees F
26 degrees C / 78 degrees F
20 degrees C / 68 degrees F
33 degrees C / 91 degrees F
20 degrees C / 68 degrees F
29 degrees C / 84 degrees F
20 degrees C / 68 degrees F
38 degrees C / 100 degrees F
20 degrees C / 68 degrees F
24 degrees C / 75 degrees F
11 degrees C / 51 degrees F
11 degrees C / 51 degrees F
11 degrees C / 51 degrees F
25 degrees C / 77 degrees F
24 degrees C / 75 degrees F
25 degrees C / 77 degrees F
26 degrees C / 78 degrees F
25 degrees C / 77 degrees F
16 degrees C / 60 degrees F
25 degrees C / 77 degrees F
21 degrees C / 69 degrees F
25 degrees C / 77 degrees F
32 degrees C / 89 degrees F
25 degrees C / 77 degrees F
25 degrees C / 77 degrees F
25 degrees C / 77 degrees F
21 degrees C / 69 degrees F
12 degrees C / 53 degrees F
20 degrees C / 68 degrees F
26 degrees C / 78 degrees F
32 degrees C / 89 degrees F
11 degrees C / 51 degrees F
21 degrees C / 69 degrees F
24 degrees C / 75 degrees F
31 degrees C / 87 degrees F
14 degrees C / 57 degrees F
21 degrees C / 69 degrees F
28 degrees C / 82 degrees F
34 degrees C / 93 degrees F
13 degrees C / 55 degrees F
19 degrees C / 66 degrees F
24 degrees C / 75 degrees F
31 degrees C / 87 degrees F
9 degrees C / 48 degrees F
22 degrees C / 71 degrees F
28 degrees C / 82 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
ADC 4 ADC-XF0
ADC 5 Intake
ADC 5 Exhaust
ADC 5 ADC-XF1
ADC 5 ADC-XF0
ADC 6 Intake
ADC 6 Exhaust
ADC 6 ADC-XF1
ADC 6 ADC-XF0
ADC 7 Intake
ADC 7 Exhaust
ADC 7 ADC-XF1
ADC 7 ADC-XF0
ADC 8 Intake
ADC 8 Exhaust
ADC 8 ADC-XF1
ADC 8 ADC-XF0
ADC 9 Intake
ADC 9 Exhaust
ADC 9 ADC-XF1
ADC 9 ADC-XF0
Fans Fan Tray 0 Fan
Fan Tray 0 Fan
Fan Tray 0 Fan
Fan Tray 0 Fan
Fan Tray 0 Fan
Fan Tray 0 Fan
Fan Tray 1 Fan
Fan Tray 1 Fan
Fan Tray 1 Fan
Fan Tray 1 Fan
Fan Tray 1 Fan
Fan Tray 1 Fan
Fan Tray 2 Fan
Fan Tray 2 Fan
Fan Tray 2 Fan
Fan Tray 2 Fan
Fan Tray 2 Fan
Fan Tray 2 Fan
Fan Tray 3 Fan
Fan Tray 3 Fan
Fan Tray 3 Fan
Fan Tray 3 Fan
Fan Tray 3 Fan
Fan Tray 3 Fan
OK
OK
OK
OK
OK
OK
OK
OK
35 degrees C
12 degrees C
22 degrees C
28 degrees C
34 degrees C
11 degrees C
21 degrees C
26 degrees C
35 degrees C / 95
14 degrees C
22 degrees C
26 degrees C
34 degrees C
14 degrees C
21 degrees C
24 degrees C
31 degrees C
10 degrees C
22 degrees C
28 degrees C
36 degrees C
3480 RPM
3480 RPM
3480 RPM
3360 RPM
3360 RPM
3480 RPM
3360 RPM
3360 RPM
3360 RPM
3480 RPM
3480 RPM
3480 RPM
3360 RPM
3360 RPM
3480 RPM
3480 RPM
3360 RPM
3480 RPM
3360 RPM
3360 RPM
3480 RPM
3480 RPM
3480 RPM
3360 RPM
OK
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
/ 95 degrees
/ 53 degrees
/ 71 degrees
/ 82 degrees
/ 93 degrees
/ 51 degrees
/ 69 degrees
/ 78 degrees
degrees F
/ 57 degrees
/ 71 degrees
/ 78 degrees
/ 93 degrees
/ 57 degrees
/ 69 degrees
/ 75 degrees
/ 87 degrees
/ 50 degrees
/ 71 degrees
/ 82 degrees
/ 96 degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
show chassis environment (T320 Router)
user@host> show chassis environment
Class Item
Status
Power PEM 0
OK
PEM 1
Absent
Temp SCG 0
OK
SCG 1
OK
Routing Engine 0
OK
Routing Engine 1
OK
CB 0
OK
CB 1
OK
SIB 0
OK
SIB 1
OK
SIB 2
OK
Copyright © 2013, Juniper Networks, Inc.
Measurement
28
28
31
30
32
32
33
33
34
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
82
82
87
86
89
89
91
91
93
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
213
PTX Series Packet Transport Switch Software Documentation
Fans
Misc
FPC 0 Top
OK
FPC 0 Bottom
OK
FPC 1 Top
OK
FPC 1 Bottom
OK
FPC 2 Top
OK
FPC 2 Bottom
OK
FPM GBUS
OK
FPM Display
OK
Top Left Front fan
OK
Top Left Middle fan
OK
Top Left Rear fan
OK
Top Right Front fan
OK
Top Right Middle fan
OK
Top Right Rear fan
OK
Bottom Left Front fan OK
Bottom Left Middle fan OK
Bottom Left Rear fan
OK
Bottom Right Front fan OK
Bottom Right Middle fan OK
Bottom Right Rear fan OK
Rear Tray Top fan
OK
Rear Tray Second fan
OK
Rear Tray Middle fan
OK
Rear Tray Fourth fan
OK
Rear Tray Bottom fan
OK
CIP
OK
SPMB 0
OK
SPMB 1
OK
38 degrees C / 100 degrees F
32 degrees C / 89 degrees F
38 degrees C / 100 degrees F
33 degrees C / 91 degrees F
36 degrees C / 96 degrees F
31 degrees C / 87 degrees F
26 degrees C / 78 degrees F
29 degrees C / 84 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (T640 Router)
user@host> show chassis environment
Class Item
Status
Temp PEM 0
Absent
PEM 1
OK
SCG 0
OK
SCG 1
OK
Routing Engine 0
Present
Routing Engine 1
OK
CB 0
Present
CB 1
OK
SIB 0
Absent
SIB 1
Absent
SIB 2
Absent
SIB 3
Absent
SIB 4
Absent
FPC 4 Top
Testing
FPC 4 Bottom
Testing
FPC 5 Top
Testing
FPC 5 Bottom
Testing
FPC 6 Top
Testing
FPC 6 Bottom
Testing
FPM GBUS
OK
FPM Display
Absent
Fans Top Left Front fan
OK
Top Left Middle fan
OK
Top Left Rear fan
OK
Top Right Front fan
OK
Top Right Middle fan
OK
Top Right Rear fan
OK
214
Measurement
22 degrees C / 71 degrees F
30 degrees C / 86 degrees F
30 degrees C / 86 degrees F
27 degrees C / 80 degrees F
33 degrees C / 91 degrees F
23 degrees C / 73 degrees F
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Misc
Bottom Left Front fan OK
Bottom Left Middle fan OK
Bottom Left Rear fan
OK
Bottom Right Front fan OK
Bottom Right Middle fan OK
Bottom Right Rear fan OK
Fourth Blower from top OK
Bottom Blower
OK
Middle Blower
OK
Top Blower
OK
Second Blower from top OK
CIP
OK
SPMB 0
OK
SPMB 1
OK
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
show chassis environment (T4000 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
SCG 0
SCG 1
Routing Engine 0
Routing Engine 0 CPU
Routing Engine 1
Routing Engine 1 CPU
CB 0
CB 1
SIB 0
SIB 1
SIB 2
SIB 3
SIB 4
FPC 0 Fan Intake
FPC 0 Fan Exhaust
FPC 0 PMB
FPC 0 LMB0
FPC 0 LMB1
FPC 0 LMB2
FPC 0 PFE1 LU2
FPC 0 PFE1 LU0
FPC 0 PFE0 LU0
FPC 0 XF1
FPC 0 XF0
FPC 0 XM1
FPC 0 XM0
FPC 0 PFE0 LU1
FPC 0 PFE0 LU2
FPC 0 PFE1 LU1
FPC 3 Fan Intake
FPC 3 Fan Exhaust
FPC 3 PMB
FPC 3 LMB0
FPC 3 LMB1
FPC 3 LMB2
FPC 3 PFE1 LU2
FPC 3 PFE1 LU0
FPC 3 PFE0 LU0
FPC 3 XF1
Copyright © 2013, Juniper Networks, Inc.
Status
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
33 degrees C / 91 degrees F
33
33
33
50
32
46
32
33
42
42
42
43
45
34
48
47
50
41
35
46
41
57
46
52
41
50
56
45
37
36
51
43
57
54
38
63
45
69
62
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
91 degrees F
91 degrees F
91 degrees F
122 degrees F
89 degrees F
114 degrees F
89 degrees F
91 degrees F
107 degrees F
107 degrees F
107 degrees F
109 degrees F
113 degrees F
93 degrees F
118 degrees F
116 degrees F
122 degrees F
105 degrees F
95 degrees F
114 degrees F
105 degrees F
134 degrees F
114 degrees F
125 degrees F
105 degrees F
122 degrees F
132 degrees F
113 degrees F
98 degrees F
96 degrees F
123 degrees F
109 degrees F
134 degrees F
129 degrees F
100 degrees F
145 degrees F
113 degrees F
156 degrees F
143 degrees F
215
PTX Series Packet Transport Switch Software Documentation
Fans
Misc
FPC 3 XF0
FPC 3 XM1
FPC 3 XM0
FPC 3 PFE0 LU1
FPC 3 PFE0 LU2
FPC 3 PFE1 LU1
FPC 5 Top
FPC 5 Bottom
FPC 6 Fan Intake
FPC 6 Fan Exhaust
FPC 6 PMB
FPC 6 LMB0
FPC 6 LMB1
FPC 6 LMB2
FPC 6 PFE1 LU2
FPC 6 PFE1 LU0
FPC 6 PFE0 LU0
FPC 6 XF1
FPC 6 XF0
FPC 6 XM1
FPC 6 XM0
FPC 6 PFE0 LU1
FPC 6 PFE0 LU2
FPC 6 PFE1 LU1
FPM GBUS
FPM Display
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
CIP
SPMB 0
SPMB 1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
63 degrees C / 145 degrees F
43 degrees C / 109 degrees F
67 degrees C / 152 degrees F
63 degrees C / 145 degrees F
66 degrees C / 150 degrees F
41 degrees C / 105 degrees F
39 degrees C / 102 degrees F
38 degrees C / 100 degrees F
33 degrees C / 91 degrees F
49 degrees C / 120 degrees F
40 degrees C / 104 degrees F
60 degrees C / 140 degrees F
58 degrees C / 136 degrees F
40 degrees C / 104 degrees F
69 degrees C / 156 degrees F
45 degrees C / 113 degrees F
71 degrees C / 159 degrees F
58 degrees C / 136 degrees F
65 degrees C / 149 degrees F
39 degrees C / 102 degrees F
66 degrees C / 150 degrees F
69 degrees C / 156 degrees F
69 degrees C / 156 degrees F
42 degrees C / 107 degrees F
24 degrees C / 75 degrees F
27 degrees C / 80 degrees F
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
Spinning at high speed
show chassis environment (TX Matrix Router)
user@host> show chassis environment
scc-re0:
-------------------------------------------------------------------------Class Item
Status
Measurement
Temp PEM 0
Absent
PEM 1
OK
29 degrees C / 84 degrees F
Routing Engine 0
OK
34 degrees C / 93 degrees F
Routing Engine 1
OK
34 degrees C / 93 degrees F
CB 0
OK
32 degrees C / 89 degrees F
216
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
Misc
CB 1
OK
SIB 0
OK
SIB 0 (B)
OK
FPM GBUS
OK
FPM Display
OK
Top Left Front fan
OK
Top Left Middle fan
OK
Top Left Rear fan
OK
Top Right Front fan
OK
Top Right Middle fan
OK
Top Right Rear fan
OK
Bottom Left Front fan OK
Bottom Left Middle fan OK
Bottom Left Rear fan
OK
Bottom Right Front fan OK
Bottom Right Middle fan OK
Bottom Right Rear fan OK
Rear Tray Top fan
OK
Rear Tray Second fan
OK
Rear Tray Third fan
OK
Rear Tray Fourth fan
OK
Rear Tray Fifth fan
OK
Rear Tray Sixth fan
OK
Rear Tray Seventh fan OK
Rear Tray Bottom fan
OK
CIP 0
OK
CIP 1
OK
SPMB 0
OK
SPMB 1
OK
32 degrees C / 89 degrees F
44 degrees C / 111 degrees F
44 degrees C / 111 degrees F
27 degrees C / 80 degrees F
32 degrees C / 89 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
lcc0-re0:
-------------------------------------------------------------------------Class Item
Status
Measurement
Temp PEM 0
OK
29 degrees C / 84 degrees F
PEM 1
Absent
SCG 0
OK
35 degrees C / 95 degrees F
SCG 1
Absent
Routing Engine 0
OK
39 degrees C / 102 degrees F
Routing Engine 1
OK
36 degrees C / 96 degrees F
CB 0
OK
32 degrees C / 89 degrees F
CB 1
OK
32 degrees C / 89 degrees F
SIB 0
OK
40 degrees C / 104 degrees F
SIB 0 (B)
OK
51 degrees C / 123 degrees F
FPC 0 Top
OK
45 degrees C / 113 degrees F
FPC 0 Bottom
OK
31 degrees C / 87 degrees F
FPC 1 Top
OK
34 degrees C / 93 degrees F
FPC 1 Bottom
OK
31 degrees C / 87 degrees F
FPM GBUS
OK
30 degrees C / 86 degrees F
FPM Display
OK
34 degrees C / 93 degrees F
Fans Top Left Front fan
OK
Spinning at normal speed
Top Left Middle fan
OK
Spinning at normal speed
Top Left Rear fan
OK
Spinning at normal speed
Top Right Front fan
OK
Spinning at normal speed
Top Right Middle fan
OK
Spinning at normal speed
Top Right Rear fan
OK
Spinning at normal speed
Bottom Left Front fan OK
Spinning at normal speed
Bottom Left Middle fan OK
Spinning at normal speed
Bottom Left Rear fan
OK
Spinning at normal speed
Bottom Right Front fan OK
Spinning at normal speed
Bottom Right Middle fan OK
Spinning at normal speed
Bottom Right Rear fan OK
Spinning at normal speed
Copyright © 2013, Juniper Networks, Inc.
217
PTX Series Packet Transport Switch Software Documentation
Misc
Rear
Rear
Rear
Rear
Rear
Rear
Rear
Rear
CIP
SPMB
SPMB
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Top fan
Second fan
Third fan
Fourth fan
Fifth fan
Sixth fan
Seventh fan
Bottom fan
0
1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
lcc2-re0:
-------------------------------------------------------------------------Class Item
Status
Measurement
Temp PEM 0
OK
29 degrees C / 84 degrees F
PEM 1
Absent
SCG 0
OK
32 degrees C / 89 degrees F
SCG 1
Absent
Routing Engine 0
OK
31 degrees C / 87 degrees F
Routing Engine 1
OK
32 degrees C / 89 degrees F
CB 0
OK
30 degrees C / 86 degrees F
SIB 0
OK
38 degrees C / 100 degrees F
SIB 0 (B)
OK
49 degrees C / 120 degrees F
FPC 0 Top
OK
45 degrees C / 113 degrees F
FPC 0 Bottom
OK
33 degrees C / 91 degrees F
FPC 1 Top
OK
37 degrees C / 98 degrees F
FPC 1 Bottom
OK
33 degrees C / 91 degrees F
FPM GBUS
OK
30 degrees C / 86 degrees F
FPM Display
OK
34 degrees C / 93 degrees F
Fans Top Left Front fan
OK
Spinning at normal speed
Top Left Middle fan
OK
Spinning at normal speed
...
show chassis environment (T1600 Router)
user@host> show chassis environment
Class Item
Temp PEM 0
PEM 1
SCG 0
SCG 1
Routing Engine 0
Routing Engine 1
CB 0
CB 1
SIB 0
SIB 0 (B)
SIB 1
SIB 1 (B)
SIB 2
SIB 2 (B)
SIB 3
SIB 3 (B)
SIB 4
SIB 4 (B)
FPC 0 Top
FPC 0 Bottom
FPC 1 Top
FPC 1 Bottom
FPM GBUS
218
Status
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
27 degrees C / 80 degrees F
31 degrees C / 87 degrees F
35 degrees C / 95 degrees F
30 degrees C / 86 degrees F
30 degrees C / 86 degrees F
31 degrees C / 87 degrees F
31 degrees C / 87 degrees F
41 degrees C / 105 degrees F
34 degrees C / 93 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
49 degrees C / 120 degrees F
50 degrees C / 122 degrees F
48 degrees C / 118 degrees F
49 degrees C / 120 degrees F
27 degrees C / 80 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
Misc
FPM Display
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
CIP
SPMB 0
SPMB 1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
30 degrees C / 86 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (TX Matrix Plus Router)
user@host> show chassis environment
sfc0-re0:
-------------------------------------------------------------------------Class Item
Status
Measurement
Temp PEM 0
OK
28 degrees C / 82 degrees F
PEM 1
Absent
Routing Engine 0
OK
27 degrees C / 80 degrees F
Routing Engine 1
OK
29 degrees C / 84 degrees F
CB 0 Intake
OK
26 degrees C / 78 degrees F
CB 0 Exhaust A
OK
25 degrees C / 77 degrees F
CB 0 Exhaust B
OK
25 degrees C / 77 degrees F
CB 1 Intake
OK
26 degrees C / 78 degrees F
CB 1 Exhaust A
OK
26 degrees C / 78 degrees F
CB 1 Exhaust B
OK
26 degrees C / 78 degrees F
SIB F13 0
OK
47 degrees C / 116 degrees F
SIB F13 0 (B)
OK
48 degrees C / 118 degrees F
SIB F13 1
OK
38 degrees C / 100 degrees F
SIB F13 1 (B)
OK
37 degrees C / 98 degrees F
SIB F2S 0/0
OK
27 degrees C / 80 degrees F
SIB F2S 0/2
OK
28 degrees C / 82 degrees F
SIB F2S 0/4
OK
27 degrees C / 80 degrees F
SIB F2S 0/6
OK
28 degrees C / 82 degrees F
SIB F2S 1/0
OK
26 degrees C / 78 degrees F
SIB F2S 1/2
OK
26 degrees C / 78 degrees F
SIB F2S 1/4
OK
26 degrees C / 78 degrees F
SIB F2S 1/6
OK
26 degrees C / 78 degrees F
SIB F2S 2/0
OK
25 degrees C / 77 degrees F
SIB F2S 2/2
OK
25 degrees C / 77 degrees F
SIB F2S 2/4
OK
23 degrees C / 73 degrees F
CIP 0 Intake
OK
23 degrees C / 73 degrees F
CIP 0 Exhaust A
OK
24 degrees C / 75 degrees F
CIP 0 Exhaust B
OK
24 degrees C / 75 degrees F
CIP 1 Intake
OK
24 degrees C / 75 degrees F
CIP 1 Exhaust A
OK
25 degrees C / 77 degrees F
Copyright © 2013, Juniper Networks, Inc.
219
PTX Series Packet Transport Switch Software Documentation
Fans
Misc
CIP 1 Exhaust B
Fan Tray 0 Fan 1
Fan Tray 0 Fan 2
Fan Tray 0 Fan 3
Fan Tray 0 Fan 4
Fan Tray 0 Fan 5
Fan Tray 0 Fan 6
Fan Tray 1 Fan 1
Fan Tray 1 Fan 2
Fan Tray 1 Fan 3
Fan Tray 1 Fan 4
Fan Tray 1 Fan 5
Fan Tray 1 Fan 6
Fan Tray 2 Fan 1
Fan Tray 2 Fan 2
Fan Tray 2 Fan 3
Fan Tray 2 Fan 4
Fan Tray 2 Fan 5
Fan Tray 2 Fan 6
Fan Tray 2 Fan 7
Fan Tray 2 Fan 8
Fan Tray 2 Fan 9
Fan Tray 3 Fan 1
Fan Tray 3 Fan 2
Fan Tray 3 Fan 3
Fan Tray 3 Fan 4
Fan Tray 3 Fan 5
Fan Tray 3 Fan 6
Fan Tray 3 Fan 7
Fan Tray 3 Fan 8
Fan Tray 3 Fan 9
Fan Tray 4 Fan 1
Fan Tray 4 Fan 2
Fan Tray 4 Fan 3
Fan Tray 4 Fan 4
Fan Tray 4 Fan 5
Fan Tray 4 Fan 6
Fan Tray 4 Fan 7
Fan Tray 4 Fan 8
Fan Tray 4 Fan 9
Fan Tray 5 Fan 1
Fan Tray 5 Fan 2
Fan Tray 5 Fan 3
Fan Tray 5 Fan 4
Fan Tray 5 Fan 5
Fan Tray 5 Fan 6
Fan Tray 5 Fan 7
Fan Tray 5 Fan 8
Fan Tray 5 Fan 9
SPMB 0
SPMB 1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
25 degrees C / 77 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
lcc0-re0:
-------------------------------------------------------------------------Class Item
Status
Measurement
Temp PEM 0
OK
27 degrees C / 80 degrees F
PEM 1
Absent
SCG 0
OK
31 degrees C / 87 degrees F
SCG 1
OK
35 degrees C / 95 degrees F
Routing Engine 0
OK
30 degrees C / 86 degrees F
Routing Engine 1
OK
30 degrees C / 86 degrees F
220
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
Misc
CB 0
CB 1
SIB 0
SIB 0 (B)
SIB 1
SIB 1 (B)
SIB 2
SIB 2 (B)
SIB 3
SIB 3 (B)
SIB 4
SIB 4 (B)
FPC 0 Top
FPC 0 Bottom
FPC 1 Top
FPC 1 Bottom
FPM GBUS
FPM Display
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
CIP
SPMB 0
SPMB 1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
31 degrees C / 87 degrees F
31 degrees C / 87 degrees F
41 degrees C / 105 degrees F
34 degrees C / 93 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
0 degrees C / 32 degrees F
49 degrees C / 120 degrees F
50 degrees C / 122 degrees F
48 degrees C / 118 degrees F
49 degrees C / 120 degrees F
27 degrees C / 80 degrees F
30 degrees C / 86 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Status
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
show chassis environment (EX4200 Standalone Switch)
user@switch> show chassis environment
Class Item
Power FPC 0 Power Supply 0
FPC 0 Power Supply 1
Temp FPC 0 CPU
FPC 0 EX-PFE1
FPC 0 EX-PFE2
FPC 0 GEPHY Front Left
FPC 0 GEPHY Front Right
FPC 0 Uplink Conn
Fans FPC 0 Fan 1
FPC 0 Fan 2
FPC 0 Fan 3
41 degrees C / 105 degrees F
42 degrees C / 107 degrees F
46 degrees C / 114 degrees F
25 degrees C / 77 degrees F
27 degrees C / 80 degrees F
29 degrees C / 84 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (EX8216 Switch)
user@switch> show chassis environment
Copyright © 2013, Juniper Networks, Inc.
221
PTX Series Packet Transport Switch Software Documentation
Class Item
Power PSU 0
PSU 1
PSU 2
PSU 3
PSU 4
PSU 5
Temp CB 0 Intake
CB 0 Exhaust
CB 1 Intake
CB 1 Exhaust
FPC 4 Intake
FPC 4 Exhaust
SIB 5 Intake
SIB 5 Exhaust
SIB 6 Intake
SIB 6 Exhaust
Fans Top Fan 1
Top Fan 2
Top Fan 3
Top Fan 4
Top Fan 5
Top Fan 6
Top Fan 7
Top Fan 8
Top Fan 9
Bottom Fan 1
Bottom Fan 2
Bottom Fan 3
Bottom Fan 4
Bottom Fan 5
Bottom Fan 6
Bottom Fan 7
Bottom Fan 8
Bottom Fan 9
Status
OK
OK
OK
Check
Absent
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Failed
OK
OK
Measurement
23 degrees C / 73 degrees F
26 degrees C / 78 degrees F
22 degrees C / 71 degrees F
25 degrees C / 77 degrees F
49 degrees C / 120 degrees F
59 degrees C / 138 degrees F
25 degrees C / 77 degrees F
35 degrees C / 95 degrees F
25 degrees C / 77 degrees F
38 degrees C / 100 degrees F
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
show chassis environment (QFX Series)
user@switch> show chassis environment
Class Item
Power FPC 0 Power Supply 0
FPC 0 Power Supply 1
Temp FPC 0 Sensor TopLeft I
FPC 0 Sensor TopRight I
FPC 0 Sensor TopLeft E
FPC 0 Sensor TopRight E
FPC 0 Sensor TopMiddle I
FPC 0 Sensor TopMiddle E
FPC 0 Sensor Bottom I
FPC 0 Sensor Bottom E
FPC 0 Sensor Die Temp
FPC 0 Sensor Mgmnt Brd I
FPC 0 Sensor Switch I
Fans FPC 0 Fan 1 (left)
FPC 0 Fan 2 (right)
FPC 0 Fan 3 (middle)
26
24
30
30
30
38
34
38
38
24
28
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
78 degrees F
75 degrees F
86 degrees F
86 degrees F
86 degrees F
100 degrees F
93 degrees F
100 degrees F
100 degrees F
75 degrees F
82 degrees F
Spinning at normal speed
Spinning at normal speed
show chassis environment interconnect-device (QFabric System)
user@switch> show chassis environment interconnect-device IC-A0004
222
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Class Item
CB 0
CB 0 L Intake
CB 0 R Intake
CB 0 L Exhaust
CB 0 R Exhaust
Routing Engine 0 CPU temp
CB 1
CB 1 L Intake
CB 1 R Intake
CB 1 L Exhaust
CB 1 R Exhaust
Routing Engine 1 CPU temp
FC 0 FPC 0
FPC 0 L Intake
FPC 0 R Intake
FPC 0 L Exhaust
FPC 0 R Exhaust
FC 7 FPC 7
FPC 7 L Intake
FPC 7 R Intake
FPC 7 L Exhaust
FPC 7 R Exhaust
RC 0 FPC 8
FPC 8 L Intake
FPC 8 R Intake
FPC 8 L Exhaust
FPC 8 R Exhaust
RC 7 FPC 15
FPC 15 L Intake
FPC 15 R Intake
FPC 15 L Exhaust
FPC 15 R Exhaust
Fans TFT 0 Fan 0
Fans TFT 0 Fan 1
Fans TFT 0 Fan 2
Fans TFT 0 Fan 3
Fans TFT 0 Fan 4
Fans TFT 0 Fan 5
Fans BFT 1 Fan 0
Fans BFT 1 Fan 1
Fans BFT 1 Fan 2
Fans BFT 1 Fan 3
Fans BFT 1 Fan 4
Fans BFT 1 Fan 5
Fans SFT 0 Fan 0 Rotor 0
Fans SFT 0 Fan 0 Rotor 1
Fans SFT 0 Fan 1 Rotor 0
Fans SFT 0 Fan 1 Rotor 1
Fans SFT 0 Fan 2 Rotor 0
Fans SFT 0 Fan 2 Rotor 1
Fans SFT 0 Fan 3 Rotor 0
Fans SFT 0 Fan 3 Rotor 1
Fans SFT 1 Fan 0 Rotor 0
Fans SFT 1 Fan 0 Rotor 1
Fans SFT 1 Fan 1 Rotor 0
Fans SFT 1 Fan 1 Rotor 1
Fans SFT 1 Fan 2 Rotor 0
Fans SFT 1 Fan 2 Rotor 1
Fans SFT 1 Fan 3 Rotor 0
Fans SFT 1 Fan 3 Rotor 1
Copyright © 2013, Juniper Networks, Inc.
Status
Measurement
OK
OK
OK
OK
OK
30
31
32
33
51
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
/
/
/
/
/
86 degrees F
87 degrees F
89 degrees F
91 degrees F
123 degrees F
OK
OK
OK
OK
OK
27
29
31
32
40
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
/
/
/
/
/
80 degrees F
84 degrees F
87 degrees F
89 degrees F
104 degrees F
OK
OK
OK
OK
25
28
28
29
degrees
degrees
degrees
degrees
C
C
C
C
/
/
/
/
77
82
82
84
degrees
degrees
degrees
degrees
F
F
F
F
OK
OK
OK
OK
25
26
28
29
degrees
degrees
degrees
degrees
C
C
C
C
/
/
/
/
77
78
82
84
degrees
degrees
degrees
degrees
F
F
F
F
OK
OK
OK
OK
25
26
32
30
degrees
degrees
degrees
degrees
C
C
C
C
/
/
/
/
77
78
89
86
degrees
degrees
degrees
degrees
F
F
F
F
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Check
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
24 degrees C / 75 degrees
25 degrees C / 77 degrees
33 degrees C / 91 degrees
31 degrees C / 87 degrees
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
F
F
F
F
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
223
PTX Series Packet Transport Switch Software Documentation
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Fans
Power
Power
Power
Power
Power
Power
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
PEM
PEM
PEM
PEM
PEM
PEM
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
0
1
2
3
4
5
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Absent
Absent
Absent
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
Spinning at normal speed
30 degrees C / 86 degrees F
30 degrees C / 86 degrees F
30 degrees C / 86 degrees F
show chassis environment node-device (QFabric System)
user@switch> show chassis environment node-device node1
Class Item
Status
Measurement
Power node1 Power Supply 0
Absent
node1 Power Supply 1
Absent
224
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
node1 Fan Tray 0
node1 Fan Tray 1
node1 Fan Tray 2
Testing
Testing
Testing
show chassis environment pem node-device (QFabric System)
user@switch> show chassis environment pem node-device node1
FPC 0 PEM 0 status:
State
Check
Airflow
Front to Back
Temperature
OK
AC Input:
OK
DC Output
Voltage(V) Current(A) Power(W) Load(%)
12
10
120
18
FPC 0 PEM 1 status:
State
Online
Airflow
Back to Front
Temperature
OK
AC Input:
OK
DC Output
Voltage(V) Current(A) Power(W) Load(%)
11
10
110
17
show chassis environment (PTX5000 Packet Transport Switch)
user@switch> show chassis environment
Class Item
Temp PDU 0
PDU 0 PSM 0
PDU 0 PSM 1
PDU 0 PSM 2
PDU 0 PSM 3
PDU 1
CCG 0
CCG 1
Routing Engine 0
Routing Engine 0 CPU
Routing Engine 1
Routing Engine 1 CPU
CB 0 Intake
CB 0 Exhaust A
CB 0 Exhaust B
CB 1 Intake
CB 1 Exhaust A
CB 1 Exhaust B
SIB 0 Intake
SIB 0 Exhaust
SIB 0 Junction
SIB 1 Intake
SIB 1 Exhaust
SIB 1 Junction
SIB 2 Intake
SIB 2 Exhaust
SIB 2 Junction
SIB 3 Intake
SIB 3 Exhaust
SIB 3 Junction
SIB 4 Intake
SIB 4 Exhaust
SIB 4 Junction
SIB 5 Intake
SIB 5 Exhaust
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
OK
OK
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Measurement
36
38
38
37
degrees
degrees
degrees
degrees
C
C
C
C
/
/
/
/
96 degrees F
100 degrees F
100 degrees F
98 degrees F
44
44
62
75
51
64
38
46
42
35
39
36
39
37
43
39
36
46
37
37
42
40
40
45
47
44
58
58
43
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
111 degrees F
111 degrees F
143 degrees F
167 degrees F
123 degrees F
147 degrees F
100 degrees F
114 degrees F
107 degrees F
95 degrees F
102 degrees F
96 degrees F
102 degrees F
98 degrees F
109 degrees F
102 degrees F
96 degrees F
114 degrees F
98 degrees F
98 degrees F
107 degrees F
104 degrees F
104 degrees F
113 degrees F
116 degrees F
111 degrees F
136 degrees F
136 degrees F
109 degrees F
225
PTX Series Packet Transport Switch Software Documentation
SIB
SIB
SIB
SIB
SIB
SIB
SIB
SIB
SIB
SIB
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
PIC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
PIC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
PIC
226
5 Junction
6 Intake
6 Exhaust
6 Junction
7 Intake
7 Exhaust
7 Junction
8 Intake
8 Exhaust
8 Junction
0 PMB
0 Intake
0 Exhaust A
0 Exhaust B
0 TL0
0 TQ0
0 TL1
0 TQ1
0 TL2
0 TQ2
0 TL3
0 TQ3
2 PMB
2 Intake
2 Exhaust A
2 Exhaust B
2 TL0
2 TQ0
2 TL1
2 TQ1
2 TL2
2 TQ2
2 TL3
2 TQ3
2/0 Ambient
3 PMB
3 Intake
3 Exhaust A
3 Exhaust B
3 TL0
3 TQ0
3 TL1
3 TQ1
3 TL2
3 TQ2
3 TL3
3 TQ3
3/1
5 PMB
5 Intake
5 Exhaust A
5 Exhaust B
5 TL0
5 TQ0
5 TL1
5 TQ1
5 TL2
5 TQ2
5 TL3
5 TQ3
5/0 Ambient
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Absent
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
71
57
42
65
58
42
66
57
42
70
35
33
51
43
48
53
56
58
55
56
59
59
35
34
51
52
53
53
57
58
54
59
60
64
49
34
35
54
49
49
55
56
58
56
59
62
63
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
159 degrees F
134 degrees F
107 degrees F
149 degrees F
136 degrees F
107 degrees F
150 degrees F
134 degrees F
107 degrees F
158 degrees F
95 degrees F
91 degrees F
123 degrees F
109 degrees F
118 degrees F
127 degrees F
132 degrees F
136 degrees F
131 degrees F
132 degrees F
138 degrees F
138 degrees F
95 degrees F
93 degrees F
123 degrees F
125 degrees F
127 degrees F
127 degrees F
134 degrees F
136 degrees F
129 degrees F
138 degrees F
140 degrees F
147 degrees F
120 degrees F
93 degrees F
95 degrees F
129 degrees F
120 degrees F
120 degrees F
131 degrees F
132 degrees F
136 degrees F
132 degrees F
138 degrees F
143 degrees F
145 degrees F
35
34
51
53
54
52
61
60
55
55
59
58
51
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
95 degrees F
93 degrees F
123 degrees F
127 degrees F
129 degrees F
125 degrees F
141 degrees F
140 degrees F
131 degrees F
131 degrees F
138 degrees F
136 degrees F
123 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fans
Misc
PIC 5/1 Ambient
PIC 5/1 cfp-5/1/0
PIC 5/1 cfp-5/1/1
FPC 6 PMB
FPC 6 Intake
FPC 6 Exhaust A
FPC 6 Exhaust B
FPC 6 TL0
FPC 6 TQ0
FPC 6 TL1
FPC 6 TQ1
FPC 6 TL2
FPC 6 TQ2
FPC 6 TL3
FPC 6 TQ3
FPC 7 PMB
FPC 7 Intake
FPC 7 Exhaust A
FPC 7 Exhaust B
FPC 7 TL0
FPC 7 TQ0
FPC 7 TL1
FPC 7 TQ1
FPC 7 TL2
FPC 7 TQ2
FPC 7 TL3
FPC 7 TQ3
FPM I2CS
Fan Tray 0 Fan 1
Fan Tray 0 Fan 2
Fan Tray 0 Fan 3
Fan Tray 0 Fan 4
Fan Tray 0 Fan 5
Fan Tray 0 Fan 6
Fan Tray 0 Fan 7
Fan Tray 0 Fan 8
Fan Tray 0 Fan 9
Fan Tray 0 Fan 10
Fan Tray 0 Fan 11
Fan Tray 0 Fan 12
Fan Tray 0 Fan 13
Fan Tray 0 Fan 14
Fan Tray 1 Fan 1
Fan Tray 1 Fan 2
Fan Tray 1 Fan 3
Fan Tray 1 Fan 4
Fan Tray 1 Fan 5
Fan Tray 1 Fan 6
Fan Tray 2 Fan 1
Fan Tray 2 Fan 2
Fan Tray 2 Fan 3
Fan Tray 2 Fan 4
Fan Tray 2 Fan 5
Fan Tray 2 Fan 6
SPMB 0 Intake
SPMB 1 Intake
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
34 degrees
34 degrees
36 degrees
36 degrees
33 degrees
51 degrees
39 degrees
44 degrees
54 degrees
59 degrees
58 degrees
60 degrees
57 degrees
65 degrees
60 degrees
35 degrees
33 degrees
53 degrees
40 degrees
46 degrees
58 degrees
53 degrees
59 degrees
56 degrees
61 degrees
63 degrees
63 degrees
37 degrees
3042 RPM
3042 RPM
3000 RPM
3042 RPM
3000 RPM
3042 RPM
3085 RPM
3042 RPM
3042 RPM
3085 RPM
3085 RPM
3128 RPM
3128 RPM
3042 RPM
2299 RPM
2399 RPM
2299 RPM
2266 RPM
2266 RPM
2366 RPM
2199 RPM
2133 RPM
2366 RPM
2233 RPM
2399 RPM
2233 RPM
50 degrees
40 degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
93 degrees F
93 degrees F
96 degrees F
96 degrees F
91 degrees F
123 degrees F
102 degrees F
111 degrees F
129 degrees F
138 degrees F
136 degrees F
140 degrees F
134 degrees F
149 degrees F
140 degrees F
95 degrees F
91 degrees F
127 degrees F
104 degrees F
114 degrees F
136 degrees F
127 degrees F
138 degrees F
132 degrees F
141 degrees F
145 degrees F
145 degrees F
98 degrees F
C / 122 degrees F
C / 104 degrees F
show chassis environment (ACX2000 Universal Access Router)
user@host> show chassis environment
Copyright © 2013, Juniper Networks, Inc.
227
PTX Series Packet Transport Switch Software Documentation
Class Item
PCB Left
SFP+ Xcvr
FEB
PCB Up
PCB Mid
Telecom Mod
Routing Engine
Heater off
228
Status
OK
OK
OK
OK
OK
OK
OK
Measurement
44 degrees C
50 degrees C
70 degrees C
63 degrees C
66 degrees C
65 degrees C
54 degrees C
/
/
/
/
/
/
/
111
122
158
145
150
149
129
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment cb
Syntax
show chassis environment cb
<slot>
Syntax (TX Matrix
Routers)
show chassis environment cb
<lcc number | scc>
<slot>
Syntax (TX Matrix Plus
Routers)
show chassis environment cb
<lcc number | sfc number >
<slot>
Syntax (MX Series
Routers)
show chassis environment cb
<slot>
<all-members>
<local>
<member member-id>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis environment cb
<slot>
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis environment cb
<slot>
Syntax (QFabric
System)
show chassis environment cb
<slot interconnect-device interconnect-device-name>
< interconnect-device interconnect-device-name slot>
Release Information
Command introduced before Junos Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
sfc option introduced for the TX Matrix Plus router in Junos Release 9.6.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M120, M320, MX Series, and T Series routers, EX8200 switches, and PTX Series Packet
Transport Switches only) Display environmental information about the Control Boards
(CBs). For information about the meaning of “CBs” on the switches, see EX Series Switches
Hardware and CLI Terminology Mapping.
Options
none—Display environmental information about all CBs. For a TX Matrix router, display
environmental information about all CBs on the TX Matrix router and its attached
T640 routers. For a TX Matrix Plus router, display environmental information about
all CBs on the TX Matrix Plus router and its attached T1600 routers.
Copyright © 2013, Juniper Networks, Inc.
229
PTX Series Packet Transport Switch Software Documentation
all-members—(MX Series routers only) (Optional) Display environmental information
about the CBs on all the members of the Virtual Chassis configuration.
interconnect-device—(QFabric systems only) Display environmental information about
the CBs on the Interconnect device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router,
display environmental information about the CBs in a specified T640 router (or
line-card chassis) that is connected to the TX Matrix router. For a TX Matrix Plus
router, display environmental information about the CBs in a specified T1600 router
(or line-card chassis) that is connected to the TX Matrix Plus router. Replace number
with a value from 0 through 3.
local—(MX Series routers only) (Optional) Display environmental information about the
CBs on the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display environmental
information about the CBs on the specified member of the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
scc—(TX Matrix router only) (Optional) Display environmental information about the
CBs in the TX Matrix router (or switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display environmental information
about the CBs in the TX Matrix Plus router (or switch-fabric chassis).
slot—(Optional) Display environmental information about the specified CB. On routers
and PTX Series Packet Transport Switches, replace slot with 0 or 1. On EX Series
switches replace slot with 0, 1, or 2. On QFX Series switches, replace slot with 0 or 1.
Required Privilege
Level
Related
Documentation
List of Sample Output
230
view
•
request chassis cb
•
Switching Control Board Redundancy
•
Routing Engine and Switching Control Board Redundancy Configuration Statements
show chassis environment cb (M120 Router) on page 231
show chassis environment cb (M320 Router) on page 232
show chassis environment cb (MX80 Router) on page 232
show chassis environment cb (MX240 Router) on page 233
show chassis environment cb (MX240 Router with Enhanced MX SCB) on page 233
show chassis environment cb (MX480 Router) on page 234
show chassis environment cb (MX480 Router with Enhanced MX SCB) on page 234
show chassis environment cb (MX960 Router) on page 235
show chassis environment cb (MX960 Router with Enhanced MX SCB) on page 235
show chassis environment cb (MX2020 Router) on page 236
show chassis environment cb (MX2010 Router) on page 236
show chassis environment cb (T4000 Core Router) on page 237
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment cb (TX Matrix Router) on page 238
show chassis environment cb (TX Matrix Plus Router) on page 239
show chassis environment cb (EX8200 Switch) on page 242
show chassis environment cb (EX8208 Switch) on page 243
show chassis environment cb (PTX5000 Packet Transport Switch) on page 244
show chassis environment cb (QFabric System) on page 245
Output Fields
Table 16 on page 231 lists the output fields for the show chassis environment cb command.
Output fields are listed in the approximate order in which they appear.
Table 16: show chassis environment cb Output Fields
Field Name
Field Description
State
Status of the CB. If two CBs are installed and online, one is functioning as the master, and the other
is the standby.
•
Online—CB is online and running.
•
Offline— CB is powered down.
NOTE: On the EX8208 switch, the installation can include three CBs. See EX Series Switches Hardware
and CLI Terminology Mapping.
Temperature
Temperature in Celsius (C) and Fahrenheit (F) of the air flowing past the CB.
•
Temperature Intake—Measures the temperature of the air intake to cool the power supplies.
•
Temperature Exhaust—Measures the temperature of the hot air exhaust.
NOTE: On the MX2010 and MX2020 routers, the intake temperature measures the temperature of
the air intake to cool the Control Board (CB). The MX2010 and MX2020 routers include intake and
exhaust temperatures for multiple zones (Intake A, Intake B, Intake C, Exhaust A, Exhaust B, and TCBC).
Power
Power required and measured on the CB. The left column displays the required power, in volts. The
right column displays the measured power, in millivolts.
BUS Revision
Revision level of the generic bus device. (Not on switches.)
FPGA Revision
Revision level of the field-programmable gate array (FPGA). (Not on switches.)
PMBus device (on
Enhanced SCB on MX 240, MX480, and MX960 routers allows the system to save power by supplying
only the amount of voltage that is required. Configurable PMBus devices are used to provide the
voltage for each individual device. There is one PMBus device for each XF ASIC so that the output can
be customized to each device. The following PMBus device information is displayed for routers with
Enhanced MX SCB:
MX240, MX480, and
MX960 routers with
Enhanced MX SCB)
•
Expected voltage
•
Measured voltage
•
Measured current
•
Calculated power
Sample Output
show chassis environment cb (M120 Router)
user@host> show chassis environment cb
Copyright © 2013, Juniper Networks, Inc.
231
PTX Series Packet Transport Switch Software Documentation
CB 0 status:
State
Temperature
Power
1.2 V
1.5 V
2.5 V
3.3 V
5.0 V
3.3 V bias
Bus Revision
FPGA Revision
CB 1 status:
State
Temperature
Power
1.2 V
1.5 V
2.5 V
3.3 V
5.0 V
3.3 V bias
Bus Revision
FPGA Revision
Online Master
33 degrees C / 91 degrees F
1214
1495
2494
3319
5085
3296
12
17
mV
mV
mV
mV
mV
mV
Online Standby
34 degrees C / 93 degrees F
1195
1495
2504
3312
5111
3296
12
17
mV
mV
mV
mV
mV
mV
show chassis environment cb (M320 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
29 degrees C / 84 degrees F
Power:
1.8 V
1805 mV
2.5 V
2501 mV
3.3 V
3293 mV
4.6 V
4725 mV
5.0 V
5032 mV
12.0 V
11975 mV
3.3 V bias
3286 mV
8.0 V bias
7589 mV
BUS Revision
40
FPGA Revision
7
CB 1 status:
State
Online Standby
Temperature
32 degrees C / 89 degrees F
Power:
1.8 V
1802 mV
2.5 V
2482 mV
3.3 V
3289 mV
4.6 V
4720 mV
5.0 V
5001 mV
12.0 V
11946 mV
3.3 V bias
3274 mV
8.0 V bias
7562 mV
BUS Revision
40
FPGA Revision
7
show chassis environment cb (MX80 Router)
user@host> show chassis environment cb
232
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CB 0 status:
State
Temperature
Power 1
1.0 V
1.0 V MQ
1.0 V LU
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
5.0 V
5.0 V bias
12.0 V
Online Master
36 degrees C / 96 degrees F
1034
1037
1005
1218
1524
1814
2558
3296
5233
5207
12162
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment cb (MX240 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Standby
Temperature
37 degrees C / 98 degrees F
Power 1
1.2 V
1208 mV
1.5 V
1521 mV
1.8 V
1811 mV
2.5 V
2513 mV
3.3 V
3332 mV
5.0 V
5059 mV
12.0 V
12162 mV
1.25 V
1260 mV
3.3 V SM3
3306 mV
5.0 V RE
5085 mV
12.0 V RE
11872 mV
Power 2
11.3 V bias PEM
11272 mV
4.6 V bias MidPlane
4827 mV
11.3 V bias FPD
11272 mV
11.3 V bias POE 0
11292 mV
11.3 V bias POE 1
11253 mV
Bus Revision
42
FPGA Revision
1
show chassis environment cb (MX240 Router with Enhanced MX SCB)
user@host> show chassis environment cb
CB 0 status:
State
Online Standby
Temperature
37 degrees C / 98 degrees F
Power 1
1.2 V
1208 mV
1.5 V
1521 mV
1.8 V
1811 mV
2.5 V
2513 mV
3.3 V
3332 mV
5.0 V
5059 mV
12.0 V
12162 mV
1.25 V
1260 mV
3.3 V SM3
3306 mV
5.0 V RE
5085 mV
12.0 V RE
11872 mV
Copyright © 2013, Juniper Networks, Inc.
233
PTX Series Packet Transport Switch Software Documentation
Power 2
11.3 V bias PEM
4.6 V bias MidPlane
11.3 V bias FPD
11.3 V bias POE 0
11.3 V bias POE 1
Bus Revision
FPGA Revision
PMBus
Expected
device
voltage
XF ASIC A
1000 mV
XF ASIC B
1000 mV
11272 mV
4827 mV
11272 mV
11292 mV
11253 mV
42
1
Measured
voltage
997 mV
996 mV
Measured
current
11031 mA
12125 mA
Calculated
power
10997 mW
12076 mW
show chassis environment cb (MX480 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
41 degrees C / 105 degrees F
Power 1
1.2 V
1202 mV
1.5 V
1511 mV
1.8 V
1798 mV
2.5 V
2507 mV
3.3 V
3312 mV
5.0 V
5027 mV
12.0 V
12200 mV
1.25 V
1260 mV
3.3 V SM3
3293 mV
5 V RE
5040 mV
12 V RE
11910 mV
Power 2
11.3 V bias PEM
11156 mV
4.6 V bias MidPlane
4801 mV
11.3 V bias FPD
11214 mV
11.3 V bias POE 0
11098 mV
11.3 V bias POE 1
11330 mV
Bus Revision
42
FPGA Revision
1
show chassis environment cb (MX480 Router with Enhanced MX SCB)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
41 degrees C / 105 degrees F
Power 1
1.2 V
1202 mV
1.5 V
1511 mV
1.8 V
1798 mV
2.5 V
2507 mV
3.3 V
3312 mV
5.0 V
5027 mV
12.0 V
12200 mV
1.25 V
1260 mV
3.3 V SM3
3293 mV
5 V RE
5040 mV
12 V RE
11910 mV
Power 2
11.3 V bias PEM
11156 mV
4.6 V bias MidPlane
4801 mV
234
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
11.3 V bias FPD
11.3 V bias POE 0
11.3 V bias POE 1
Bus Revision
FPGA Revision
PMBus
Expected
device
voltage
XF ASIC A
1000 mV
XF ASIC B
1000 mV
11214 mV
11098 mV
11330 mV
42
1
Measured
voltage
997 mV
996 mV
Measured
current
11031 mA
12125 mA
Calculated
power
10997 mW
12076 mW
show chassis environment cb (MX960 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
24 degrees C / 75 degrees F
Power 1
1.2 V
1965 mV
1.5 V
2465 mV
1.8 V
2990 mV
2.5 V
3296 mV
3.3 V
3296 mV
5.0 V
6593 mV
12.0 V
13187 mV
3.3 V bias
3296 mV
1.25 V
1994 mV
3.3 V SM3
3296 mV
5 V RE
6593 mV
12 V RE
13174 mV
Power 2
Sensor failure
Bus Revision
4
FPGA Revision
3
show chassis environment cb (MX960 Router with Enhanced MX SCB)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
24 degrees C / 75 degrees F
Power 1
1.2 V
1965 mV
1.5 V
2465 mV
1.8 V
2990 mV
2.5 V
3296 mV
3.3 V
3296 mV
5.0 V
6593 mV
12.0 V
13187 mV
3.3 V bias
3296 mV
1.25 V
1994 mV
3.3 V SM3
3296 mV
5 V RE
6593 mV
12 V RE
13174 mV
Power 2
Sensor failure
Bus Revision
4
FPGA Revision
3
PMBus
Expected
Measured
Measured Calculated
device
voltage
voltage
current
power
XF ASIC A
1000 mV
997 mV
11031 mA
10997 mW
XF ASIC B
1000 mV
996 mV
12125 mA
12076 mW
Copyright © 2013, Juniper Networks, Inc.
235
PTX Series Packet Transport Switch Software Documentation
show chassis environment cb (MX2020 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
IntakeA-Zone0 Temperature 44 degrees C /
IntakeB-Zone1 Temperature 34 degrees C /
IntakeC-Zone0 Temperature 45 degrees C /
ExhaustA-Zone0 Temperature 43 degrees C /
ExhaustB-Zone1 Temperature 36 degrees C /
TCBC-Zone0 Temperature
39 degrees C /
Power 1
1.0 V
1011 mV
1.2 V
1208 mV
1.8 V
1801 mV
2.5 V
2552 mV
3.3 V
3312 mV
5.0 V
5040 mV
5.0 V RE
4988 mV
12.0 V
12065 mV
12.0 V RE
12046 mV
Bus Revision
99
FPGA Revision
270
CB 1 status:
State
Online Standby
IntakeA-Zone0 Temperature 45 degrees C /
IntakeB-Zone1 Temperature 41 degrees C /
IntakeC-Zone0 Temperature 46 degrees C /
ExhaustA-Zone0 Temperature 44 degrees C /
ExhaustB-Zone1 Temperature 41 degrees C /
TCBC-Zone0 Temperature
45 degrees C /
Power 1
1.0 V
1008 mV
1.2 V
1208 mV
1.8 V
1798 mV
2.5 V
2539 mV
3.3 V
3325 mV
5.0 V
5033 mV
5.0 V RE
4950 mV
12.0 V
12046 mV
12.0 V RE
11968 mV
Bus Revision
99
FPGA Revision
0
111 degrees F
93 degrees F
113 degrees F
109 degrees F
96 degrees F
102 degrees F
113
105
114
111
105
113
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
show chassis environment cb (MX2010 Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
IntakeA-Zone0 Temperature 36 degrees C /
IntakeB-Zone1 Temperature 30 degrees C /
IntakeC-Zone0 Temperature 38 degrees C /
ExhaustA-Zone0 Temperature 36 degrees C /
ExhaustB-Zone1 Temperature 32 degrees C /
TCBC-Zone0 Temperature
34 degrees C /
Power 1
1.0 V
1015 mV
1.2 V
1205 mV
1.8 V
1804 mV
2.5 V
2552 mV
3.3 V
3325 mV
236
96 degrees F
86 degrees F
100 degrees F
96 degrees F
89 degrees F
93 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
5.0 V
5.0 V RE
12.0 V
12.0 V RE
Bus Revision
FPGA Revision
CB 1 status:
State
IntakeA-Zone0 Temperature
IntakeB-Zone1 Temperature
IntakeC-Zone0 Temperature
ExhaustA-Zone0 Temperature
ExhaustB-Zone1 Temperature
TCBC-Zone0 Temperature
Power 1
1.0 V
1.2 V
1.8 V
2.5 V
3.3 V
5.0 V
5.0 V RE
12.0 V
12.0 V RE
Bus Revision
FPGA Revision
5020
4988
12104
12026
100
270
mV
mV
mV
mV
Online
35 degrees
28 degrees
37 degrees
34 degrees
29 degrees
32 degrees
1011
1208
1788
2526
3319
5046
4975
12046
12007
100
0
C
C
C
C
C
C
/
/
/
/
/
/
95
82
98
93
84
89
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment cb (T4000 Core Router)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature
33 degrees C / 91 degrees F
Power 1
1.8 V
1805 mV
2.5 V
2523 mV
3.3 V
3324 mV
3.3 V bias
3296 mV
4.6 V
4680 mV
5.0 V
4893 mV
8.0 V bias
7572 mV
12.0 V
11916 mV
Power 2
1.0 V
993 mV
1.2 V
1210 mV
3.3 V RE
3330 mV
Bus Revision
51
FPGA Revision
5
CB 1 status:
State
Online Standby
Temperature
33 degrees C / 91 degrees F
Power 1
1.8 V
1810 mV
2.5 V
2496 mV
3.3 V
3308 mV
3.3 V bias
3286 mV
4.6 V
4692 mV
5.0 V
4954 mV
8.0 V bias
7282 mV
12.0 V
11926 mV
Power 2
Copyright © 2013, Juniper Networks, Inc.
237
PTX Series Packet Transport Switch Software Documentation
1.0 V
1.2 V
3.3 V RE
Bus Revision
FPGA Revision
993 mV
1185 mV
3316 mV
51
5
show chassis environment cb (TX Matrix Router)
user@host> show chassis environment cb
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
32 degrees C / 89 degrees F
Power:
1.8 V
1797 mV
2.5 V
2477 mV
3.3 V
3311 mV
4.6 V
4727 mV
5.0 V
5015 mV
12.0 V
12185 mV
3.3 V bias
3304 mV
8.0 V bias
7870 mV
BUS Revision
40
FPGA Revision
1
CB 1 status:
State
Online Standby
...
lcc0-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
32 degrees C / 89 degrees F
Power:
1.8 V
1787 mV
2.5 V
2473 mV
3.3 V
3306 mV
4.6 V
4793 mV
5.0 V
5025 mV
12.0 V
12156 mV
3.3 V bias
3289 mV
8.0 V bias
7609 mV
BUS Revision
40
FPGA Revision
5
CB 1 status:
State
Online Standby
....
BUS Revision
40
FPGA Revision
5
lcc2-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
...
CB 1 status:
State
Online Standby
...
238
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment cb (TX Matrix Plus Router)
user@host> show chassis environment cb
sfc0-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
38 degrees C / 100 degrees F
Power 1
1.0 V
1005 mV
1.1 V
1108 mV
1.2 V
1205 mV
1.25 V
1269 mV
1.5 V
1508 mV
1.8 V
1814 mV
2.5 V
2507 mV
3.3 V
3306 mV
3.3 V bias
3300 mV
9.0 V
9058 mV
9.0 V RE
9107 mV
Power 2
3.9 V
3963 mV
5.0 V
5020 mV
9.0 V
9087 mV
Bus Revision
79
FPGA Revision
23
CB 1 status:
State
Online Standby
Temperature
39 degrees C / 102 degrees F
Power 1
1.0 V
1002 mV
1.1 V
1105 mV
1.2 V
1198 mV
1.25 V
1276 mV
1.5 V
1504 mV
1.8 V
1804 mV
2.5 V
2507 mV
3.3 V
3300 mV
3.3 V bias
3293 mV
9.0 V
9039 mV
9.0 V RE
9049 mV
Power 2
3.9 V
3892 mV
5.0 V
5040 mV
9.0 V
9058 mV
Bus Revision
79
FPGA Revision
23
lcc0-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
39 degrees C / 102 degrees F
Power 1
1.8 V
1799 mV
2.5 V
2499 mV
3.3 V
3327 mV
3.3 V bias
3299 mV
4.6 V
4673 mV
5.0 V
4918 mV
8.0 V bias
7308 mV
Copyright © 2013, Juniper Networks, Inc.
239
PTX Series Packet Transport Switch Software Documentation
12.0 V
Power 2
1.0 V
1.2 V
3.3 V RE
Bus Revision
FPGA Revision
CB 1 status:
State
Temperature
Power 1
1.8 V
2.5 V
3.3 V
3.3 V bias
4.6 V
5.0 V
8.0 V bias
12.0 V
Power 2
1.0 V
1.2 V
3.3 V RE
Bus Revision
FPGA Revision
11887 mV
996 mV
1199 mV
3319 mV
51
3
Online Standby
40 degrees C / 104 degrees F
1800
2496
3322
3284
4680
4954
7284
11902
mV
mV
mV
mV
mV
mV
mV
mV
998 mV
1205 mV
3327 mV
51
3
lcc1-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
41 degrees C / 105 degrees F
Power 1
1.8 V
1804 mV
2.5 V
2517 mV
3.3 V
3300 mV
3.3 V bias
3284 mV
4.6 V
4681 mV
5.0 V
4927 mV
8.0 V bias
7357 mV
12.0 V
11907 mV
Power 2
1.0 V
991 mV
1.2 V
1202 mV
3.3 V RE
3301 mV
Bus Revision
51
FPGA Revision
3
CB 1 status:
State
Online Standby
Temperature
40 degrees C / 104 degrees F
Power 1
1.8 V
1805 mV
2.5 V
2528 mV
3.3 V
3324 mV
3.3 V bias
3289 mV
4.6 V
4694 mV
5.0 V
4959 mV
8.0 V bias
7311 mV
12.0 V
11926 mV
Power 2
1.0 V
998 mV
1.2 V
1200 mV
240
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
3.3 V RE
Bus Revision
FPGA Revision
3313 mV
51
3
lcc2-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
41 degrees C / 105 degrees F
Power 1
1.8 V
1805 mV
2.5 V
2494 mV
3.3 V
3333 mV
3.3 V bias
3296 mV
4.6 V
4673 mV
5.0 V
4901 mV
8.0 V bias
7343 mV
12.0 V
11916 mV
Power 2
1.0 V
993 mV
1.2 V
1213 mV
3.3 V RE
3328 mV
Bus Revision
51
FPGA Revision
3
CB 1 status:
State
Online Standby
Temperature
41 degrees C / 105 degrees F
Power 1
1.8 V
1804 mV
2.5 V
2523 mV
3.3 V
3334 mV
3.3 V bias
3291 mV
4.6 V
4697 mV
5.0 V
4969 mV
8.0 V bias
7308 mV
12.0 V
11936 mV
Power 2
1.0 V
996 mV
1.2 V
1200 mV
3.3 V RE
3328 mV
Bus Revision
51
FPGA Revision
3
lcc3-re0:
-------------------------------------------------------------------------CB 0 status:
State
Online Master
Temperature
37 degrees C / 98 degrees F
Power 1
1.8 V
1809 mV
2.5 V
2510 mV
3.3 V
3296 mV
3.3 V bias
3291 mV
4.6 V
4670 mV
5.0 V
4905 mV
8.0 V bias
7211 mV
12.0 V
11882 mV
Power 2
1.0 V
996 mV
1.2 V
1188 mV
3.3 V RE
3326 mV
Copyright © 2013, Juniper Networks, Inc.
241
PTX Series Packet Transport Switch Software Documentation
Bus Revision
FPGA Revision
CB 1 status:
State
Temperature
Power 1
1.8 V
2.5 V
3.3 V
3.3 V bias
4.6 V
5.0 V
8.0 V bias
12.0 V
Power 2
1.0 V
1.2 V
3.3 V RE
Bus Revision
FPGA Revision
51
5
Online Standby
38 degrees C / 100 degrees F
1813
2510
3322
3289
4692
4967
7194
11916
mV
mV
mV
mV
mV
mV
mV
mV
996 mV
1205 mV
3273 mV
51
5
show chassis environment cb (EX8200 Switch)
user@host> show chassis environment cb
CB 0 status:
State
Temperature Intake
Temperature Exhaust
Power 1
1.1 V
1.2 V
1.2 V *
1.2 V *
1.25 V
1.5 V
1.8 V
2.5 V
3.3 V
3.3 V bias
5.0 V
12.0 V
Power 2
3.3 V bias *
3.3 V bias *
3.3 V bias *
3.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
5.0 V bias
CB 1 status:
State
Temperature Intake
Temperature Exhaust
Power 1
1.1 V
1.2 V
242
Online Master
20 degrees C / 68 degrees F
24 degrees C / 75 degrees F
1086
1179
1182
1182
1211
1472
1756
2449
3254
3300
4911
11891
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
3615
3615
3567
3664
4224
4215
4224
4205
4195
4215
4920
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online Standby
19 degrees C / 66 degrees F
23 degrees C / 73 degrees F
1082 mV
1169 mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.2 V *
1.2 V *
1.25 V
1.5 V
1.8 V
2.5 V
3.3 V
3.3 V bias
5.0 V
12.0 V
Power 2
3.3 V bias *
3.3 V bias *
3.3 V bias *
3.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
5.0 V bias
CB 2 status:
State
Temperature Intake
Temperature Exhaust
Power 1
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
3.3 V bias
12.0 V
1179
1179
1214
1482
1759
2481
3248
3306
4911
11910
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
3644
3664
3586
3654
4224
4215
4224
4205
4244
4215
4930
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
19 degrees C / 66 degrees F
23 degrees C / 73 degrees F
1195
1511
1804
2526
3300
3306
12220
mV
mV
mV
mV
mV
mV
mV
show chassis environment cb (EX8208 Switch)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Temperature Intake
20 degrees C / 68 degrees F
Temperature Exhaust
24 degrees C / 75 degrees F
Power 1
1.1 V
1086 mV
1.2 V
1179 mV
1.2 V *
1182 mV
1.2 V *
1182 mV
1.25 V
1211 mV
1.5 V
1466 mV
1.8 V
1759 mV
2.5 V
2455 mV
3.3 V
3261 mV
3.3 V bias
3300 mV
5.0 V
4930 mV
12.0 V
11891 mV
Power 2
3.3 V bias *
3606 mV
3.3 V bias *
3615 mV
3.3 V bias *
3567 mV
3.3 V bias *
3673 mV
4.3 V bias *
4224 mV
Copyright © 2013, Juniper Networks, Inc.
243
PTX Series Packet Transport Switch Software Documentation
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
5.0 V bias
CB 1 status:
State
Temperature Intake
Temperature Exhaust
Power 1
1.1 V
1.2 V
1.2 V *
1.2 V *
1.25 V
1.5 V
1.8 V
2.5 V
3.3 V
3.3 V bias
5.0 V
12.0 V
Power 2
3.3 V bias *
3.3 V bias *
3.3 V bias *
3.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
4.3 V bias *
5.0 V bias
CB 2 status:
State
Temperature Intake
Temperature Exhaust
Power 1
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
3.3 V bias
12.0 V
4215
4234
4205
4186
4215
4940
mV
mV
mV
mV
mV
mV
Online Standby
19 degrees C / 66 degrees F
23 degrees C / 73 degrees F
1086
1169
1179
1179
1211
1479
1759
2475
3235
3306
4930
11891
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
3644
3664
3586
3654
4215
4224
4215
4215
4234
4224
4920
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
20 degrees C / 68 degrees F
24 degrees C / 75 degrees F
1202
1508
1804
2520
3300
3300
12200
mV
mV
mV
mV
mV
mV
mV
show chassis environment cb (PTX5000 Packet Transport Switch)
user@host> show chassis environment cb
CB 0 status:
State
Online Master
Intake Temperature
38 degrees C / 100 degrees F
Exhaust A Temperature
45 degrees C / 113 degrees F
Exhaust B Temperature
42 degrees C / 107 degrees F
Power 1
1.2 V
1200 mV
1.25 V
1250 mV
2.5 V
2500 mV
3.3 V
3300 mV
244
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Power 2
1.0 V
3.3 V bias
3.9 V
Bus Revision
FPGA Revision
CB 1 status:
State
Intake Temperature
Exhaust A Temperature
Exhaust B Temperature
Power 1
1.2 V
1.25 V
2.5 V
3.3 V
Power 2
1.0 V
3.3 V bias
3.9 V
Bus Revision
FPGA Revision
1000 mV
3293 mV
3921 mV
132
27
Online Standby
34 degrees C / 93 degrees F
39 degrees C / 102 degrees F
36 degrees C / 96 degrees F
1199
1250
2499
3299
mV
mV
mV
mV
1000 mV
3312 mV
3961 mV
132
28
show chassis environment cb (QFabric System)
user@switch> show chassis environment cb interconnect-device IC-123 0
CB 0 status:
State
Online Master
Left Intake Temperature
33 degrees C / 91 degrees F
Right Intake Temperature
33 degrees C / 91 degrees F
Left Exhaust Temperature
36 degrees C / 96 degrees F
Right Exhaust Temperature 35 degrees C / 95 degrees F
Power
OK
VDD 3V3
3294 mV
VDD 2V5
2436 mV
VDD 1V8
1746 mV
VDD 1V5
1460 mV
VDD 1V25
1210 mV
VDD 1V2
1164 mV
CPU CORE 1V2
1120 mV
VDD 1V0
968 mV
VDD 5V0
5088 mV
CPU MP BIAS 4V3
4050 mV
BIAS 3V3
3180 mV
VTT 0V9
866 mV
Copyright © 2013, Juniper Networks, Inc.
245
PTX Series Packet Transport Switch Software Documentation
show chassis environment ccg
Syntax
Release Information
show chassis environment ccg
<slot>
Command introduced in Junos OS Release 12.1.
Description
(PTX Series Packet Transport Switches only) Display environmental information about
the Centralized Clock Generators (CCGs).
Options
none—Display environmental information about all CCGs on the PTX Packet Transport
Switch.
slot —(Optional) Display environmental information about the specified CCG. Replace
slot with 0 or 1.
Required Privilege
Level
List of Sample Output
Output Fields
view
show chassis environment ccg (PTX5000) on page 246
Table 17 on page 246 lists the output fields for the show chassis environment ccg command.
Output fields are listed in the approximate order in which they appear.
Table 17: show chassis environment cb Output Fields
Field Name
Field Description
State
Status of the CCG: Online - Master clock , Online - Standby, or Offline. If
two CCGs are installed and online, one is functioning as the master clock,
and the other is the standby clock.
Temperature
Temperature of the air flowing past the CCG.
Power
Power required and measured on the CCG. The left column displays the
required power, in volts. The right column displays the measured power,
in millivolts.
BUS Revision
Revision level of the generic bus device.
Sample Output
show chassis environment ccg (PTX5000)
user@host> show chassis environment ccg
CCG 0 status:
State
Online - Master clock
Temperature
31 degrees C / 87 degrees F
Power
1.2 V bias
1200 mV
1.8 V
1799 mV
3.3 V
3300 mV
3.3 V bias
3300 mV
246
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Bus Revision
CCG 1 status:
State
Power
Temperature
Power
1.2 V bias
1.8 V
3.3 V
3.3 V bias
Bus Revision
Copyright © 2013, Juniper Networks, Inc.
103
Offline
Disabled
31 degrees C / 87 degrees F
1198
161
451
3311
103
mV
mV
mV
mV
247
PTX Series Packet Transport Switch Software Documentation
show chassis environment fpc
Syntax
show chassis environment fpc
<slot>
Syntax (TX Matrix and
TX Matrix Plus
Routers)
show chassis environment fpc
<lcc number>
<slot>
Syntax (MX Series
Routers)
show chassis environment fpc
<slot>
<all-members>
<local>
<member member-id>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis environment fpc
<slot>
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis environment fpc
<slot>
Syntax (QFX Series)
show chassis environment fpc
<fpc-slot>
interconnect-device name
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M40e, M120, M160, M320, MX Series, T Series routers, EX Series, QFX Series, and PTX
Series switches only) Display environmental information about Flexible PIC Concentrators
(FPCs).
Options
none—Display environmental information about all FPCs. On a TX Matrix router, display
environmental information about all FPCs on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router, display environmental information about
all FPCs on the TX Matrix Plus router and its attached T1600 routers.
all-members—(MX Series routers only) (Optional) Display environmental information
for the FPCs in all the members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Interconnect device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display environmental information about the FPC in a T640 router (or line-card
248
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, display
environmental information about the FPC in a T1600 router (or line-card chassis)
that is connected to the TX Matrix Plus router. Replace number with a value from
0 through 3.
local—(MX Series routers only) (Optional) Display environmental information for the
FPCs in the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display environmental
information for the FPCs in the specified member of the Virtual Chassis configuration.
Replace member-id with a value of 0 or 1.
slot or fpc-slot—(Optional) Display environmental information about an individual FPC:
•
(TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, if you specify
the number of the T640 router by using only the lcc number option (the
recommended method), replace slot with a value from 0 through 7. Similarly, on
a TX Matrix Plus router, if you specify the number of the T1600 router by using only
the lcc number option (the recommended method), replace slot with a value from
0 through 7. Otherwise, replace slot with a value from 0 through 31. For example,
the following commands have the same result:
user@host> show chassis environment fpc 1 lcc 1
user@host> show chassis environment fpc 9
•
M120 router—Replace slot with a value from 0 through 5.
•
MX240 router—Replace slot with a value from 0 through 2.
•
MX480 router—Replace slot with a value from 0 through 5.
•
MX960 router—Replace slot with a value from 0 through 11.
•
MX2010 router—Replace slot with a value from 0 through 9.
•
MX2020 router—Replace slot with a value from 0 through 19.
•
Other routers—Replace slot with a value from 0 through 7.
•
EX Series switches:
•
EX3200 switches and EX4200 standalone switches—Replace slot with 0.
•
EX4200 switches in a Virtual Chassis configuration—Replace slot with a value
from 0 through 9 (switch’s member ID).
•
EX6210 switches–Replace slot with a value from 0 through 3 (line card only),
4 or 5 (line card or Switch Fabric and Rotuing Engine (SRE) module), or 6 through
9 (line card only).
•
EX8208 switches—Replace slot with a value from 0 through 7 (line card).
•
EX8216 switches—Replace slot with a value from 0 through 15 (line card).
•
QFX3500 switches —Replace fpc-slot with 0 through 15.
•
PTX5000 Packet Transport Switch—Replace fpc-slot with 0 through 7.
Copyright © 2013, Juniper Networks, Inc.
249
PTX Series Packet Transport Switch Software Documentation
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
250
view
•
request chassis fpc on page 156
•
show chassis fpc on page 442
•
show chassis fpc-feb-connectivity
•
Configuring the Junos OS to Resynchronize FPC Sequence Numbers with Active FPCs
when an FPC Comes Online
•
MX960 Flexible PIC Concentrator Description
show chassis environment fpc (M120 Router) on page 252
show chassis environment fpc (M160 Router) on page 253
show chassis environment fpc (M320 Router) on page 253
show chassis environment fpc (MX2020 Router) on page 254
show chassis environment fpc (MX2010 Router) on page 257
show chassis environment fpc (MX240 Router) on page 259
show chassis environment fpc (MX480 Router) on page 260
show chassis environment fpc (MX960 Router) on page 261
show chassis environment fpc (MX480 Router with 100-Gigabit Ethernet
CFP) on page 262
show chassis environment fpc (MX240, MX480, MX960 with Application Services
Modular Line Card on page 263
show chassis environment fpc (T320, T640, and T1600 Routers) on page 263
show chassis environment fpc (T4000 Router) on page 264
show chassis environment fpc lcc (TX Matrix Router) on page 269
show chassis environment fpc lcc (TX Matrix Plus Router) on page 270
show chassis environment fpc (QFX Series) on page 271
show chassis environment fpc interconnect-device (QFabric Systems) on page 271
show chassis environment fpc 0 (PTX5000 Packet Transport Switch) on page 271
show chassis environment FPC 1 (MX Routers with Media Services Blade
[MSB]) on page 272
Table 18 on page 251 lists the output fields for the show chassis environment fpc command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 18: show chassis environment fpc Output Fields
Field Name
Field Description
State
Status of the FPC:
•
Unknown—FPC is not detected by the router.
•
Empty—No FPC is present.
•
Present—FPC is detected by the chassis daemon but is either not supported by the current version
of the Junos OS, or the FPC is coming up but not yet online.
•
Ready—FPC is in intermediate or transition state.
•
Announce online—Intermediate state during which the FPC is coming up but not yet online, and the
chassis manager acknowledges the chassisd FPC online initiative.
•
Online—FPC is online and running.
•
Offline—FPC is powered down.
•
Diagnostics—FPC is set to operate in diagnostics mode.
Temperature
(M40e and M160 routers and QFX Series only) Temperature of the air flowing past the FPC.
PMB Temperature
(PTX Series only) Temperature of the air flowing past the PMB (bottom of the FPC).
Temperature Intake
(M320 routers, MX2010 routers, MX2020 routers, and PTX Series only) Temperature of the air flowing
into the chassis.
Temperature Top
(T Series routers only) Temperature of the air flowing past the top of the FPC.
Temperature Exhaust
(M120 and M320 routers, MX2010 routers, MX2020 routers, and PTX Series only) Temperature of the
air flowing out of the chassis.
The PTX Series Packet Transport Switches, and the MX2010 and MX2020 routers include exhaust
temperatures for multiple zones (Exhaust A and Exhaust B).
Temperature Bottom
(T Series routers only) Temperature of the air flowing past the bottom of the FPC.
TL n Temperature
(PTX Series only) Temperature of the air flowing past the specified TL area of the packet forwarding
engine (PFE) on the FPC.
TQ n Temperature
(PTX Series only) Temperature of the air flowing past the specified TQ area of the packet forwarding
engine (PFE) on the FPC.
Temperature MMBO
(T640 router only) Temperature of the air flowing past the type 3 FPC.
Temperature MMB1
(M320 and T Series routers only) Temperature of the air flowing past the type 1, type 2, and type 3
FPC.
Power
Information about the voltage supplied to the FPC. The left column displays the required power, in
volts. The right column displays the measured power, in millivolts.
CMB Revision or BUS
revision
Revision level of the chassis management bus device (M Series router) or bus (T Series routers).
Copyright © 2013, Juniper Networks, Inc.
251
PTX Series Packet Transport Switch Software Documentation
Sample Output
show chassis environment fpc (M120 Router)
user@host> show chassis environment fpc
FPC 2 status:
State
Online
Temperature Exhaust A
32 degrees
Temperature Exhaust B
31 degrees
Power A-Board
1.2 V
1202 mV
1.5 V
1508 mV
1.8 V
1798 mV
2.5 V
2507 mV
3.3 V
3351 mV
5.0 V
4995 mV
3.3 V bias
3296 mV
1.2 V Rocket IO
1205 mV
1.5 V Rocket IO
1501 mV
I2C Slave Revision
12
FPC 3 status:
State
Online
Temperature Exhaust A
31 degrees
Temperature Exhaust B
33 degrees
Power A-Board
1.2 V
1211 mV
1.5 V
1501 mV
1.8 V
1798 mV
2.5 V
2471 mV
3.3 V
3293 mV
5.0 V
4930 mV
3.3 V bias
3296 mV
1.2 V Rocket IO
1205 mV
1.5 V Rocket IO
1501 mV
Power B-Board
1.2 V
1214 mV
1.5 V
1501 mV
2.5 V
2471 mV
3.3 V
3300 mV
5.0 V
4943 mV
3.3 V bias
3296 mV
1.2 V Rocket IO
1205 mV
1.5 V Rocket IO
1501 mV
I2C Slave Revision
12
FPC 4 status:
State
Online
Temperature Exhaust A
32 degrees
Temperature Exhaust B
30 degrees
Power A-Board
1.2 V
1195 mV
1.5 V
1504 mV
1.8 V
1801 mV
2.5 V
2504 mV
3.3 V
3293 mV
5.0 V
4917 mV
3.3 V bias
3296 mV
1.2 V Rocket IO
1202 mV
1.5 V Rocket IO
1492 mV
I2C Slave Revision
12
252
C / 89 degrees F
C / 87 degrees F
C / 87 degrees F
C / 91 degrees F
C / 89 degrees F
C / 86 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment fpc (M160 Router)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature
42 degrees C / 107 degrees F
Power:
1.5 V
1500 mV
2.5 V
2509 mV
3.3 V
3308 mV
5.0 V
4991 mV
5.0 V bias
4952 mV
8.0 V bias
8307 mV
CMB Revision
12
FPC 1 status:
State
Online
Temperature
45 degrees C / 113 degrees F
Power:
1.5 V
1498 mV
2.5 V
2501 mV
3.3 V
3319 mV
5.0 V
5020 mV
5.0 V bias
5025 mV
8.0 V bias
8307 mV
CMB Revision
12
show chassis environment fpc (M320 Router)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature Intake
27 degrees
Temperature Exhaust
38 degrees
Temperature MMB1
31 degrees
Power:
1.5 V
1487 mV
1.5 V *
1494 mV
1.8 V
1821 mV
2.5 V
2533 mV
3.3 V
3323 mV
5.0 V
5028 mV
3.3 V bias
3296 mV
5.0 V bias
4984 mV
CMB Revision
16
FPC 1 status:
State
Online
Temperature Intake
27 degrees
Temperature Exhaust
37 degrees
Temperature MMB1
32 degrees
Power:
1.5 V
1504 mV
1.5 V *
1499 mV
1.8 V
1820 mV
2.5 V
2529 mV
3.3 V
3328 mV
5.0 V
5013 mV
3.3 V bias
3294 mV
5.0 V bias
4984 mV
CMB Revision
16
FPC 2 status:
State
Online
Copyright © 2013, Juniper Networks, Inc.
C / 80 degrees F
C / 100 degrees F
C / 87 degrees F
C / 80 degrees F
C / 98 degrees F
C / 89 degrees F
253
PTX Series Packet Transport Switch Software Documentation
Temperature Intake
Temperature Exhaust
Temperature MMB1
Power:
1.5 V
1.5 V *
1.8 V
2.5 V
3.3 V
5.0 V
3.3 V bias
5.0 V bias
CMB Revision
FPC 3 status:
...
28 degrees C / 82 degrees F
38 degrees C / 100 degrees F
32 degrees C / 89 degrees F
1498
1487
1816
2531
3324
5025
3277
5013
17
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX2020 Router)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature Intake
41 degrees
Temperature Exhaust A
48 degrees
Temperature Exhaust B
60 degrees
Temperature LU 0 TSen
56 degrees
Temperature LU 0 Chip
59 degrees
Temperature LU 1 TSen
56 degrees
Temperature LU 1 Chip
61 degrees
Temperature LU 2 TSen
56 degrees
Temperature LU 2 Chip
52 degrees
Temperature LU 3 TSen
56 degrees
Temperature LU 3 Chip
52 degrees
Temperature MQ 0 TSen
49 degrees
Temperature MQ 0 Chip
49 degrees
Temperature MQ 1 TSen
49 degrees
Temperature MQ 1 Chip
52 degrees
Temperature MQ 2 TSen
49 degrees
Temperature MQ 2 Chip
45 degrees
Temperature MQ 3 TSen
49 degrees
Temperature MQ 3 Chip
46 degrees
Power
AS-BIAS3V3-zl2105
3299 mV
AS-VDD1V8-zl2006
1807 mV
AS-VDD2V5-zl2006
2512 mV
AS-AVDD1V0-zl2004
997 mV
AS-PCIE_1V0-zl2004
996 mV
AS-VDD3V3-zl2004
3294 mV
AS-VDD_1V5A-zl2004
1501 mV
AS-VDD_1V5B-zl2004
1498 mV
AS-LU0_1V0-zl2004
998 mV
AS-LU1_1V0-zl2004
1002 mV
AS-MQ0_1V0-zl2004
999 mV
AS-MQ1_1V0-zl2004
994 mV
AS-LU2_1V0-zl2004
1000 mV
AS-LU3_1V0-zl2004
998 mV
AS-MQ2_1V0-zl2004
1002 mV
AS-MQ3_1V0-zl2004
999 mV
AS-PMB_1V1-zl2006
1096 mV
I2C Slave Revision
68
FPC 1 status:
State
Online
254
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
105
118
140
132
138
132
141
132
125
132
125
120
120
120
125
120
113
120
114
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Temperature Intake
Temperature Exhaust A
Temperature Exhaust B
Temperature LU 0 TSen
Temperature LU 0 Chip
Temperature LU 1 TSen
Temperature LU 1 Chip
Temperature LU 2 TSen
Temperature LU 2 Chip
Temperature LU 3 TSen
Temperature LU 3 Chip
Temperature MQ 0 TSen
Temperature MQ 0 Chip
Temperature MQ 1 TSen
Temperature MQ 1 Chip
Temperature MQ 2 TSen
Temperature MQ 2 Chip
Temperature MQ 3 TSen
Temperature MQ 3 Chip
Power
AS-BIAS3V3-zl2105
AS-VDD1V8-zl2006
AS-VDD2V5-zl2006
AS-AVDD1V0-zl2004
AS-PCIE_1V0-zl2004
AS-VDD3V3-zl2004
AS-VDD_1V5A-zl2004
AS-VDD_1V5B-zl2004
AS-LU0_1V0-zl2004
AS-LU1_1V0-zl2004
AS-MQ0_1V0-zl2004
AS-MQ1_1V0-zl2004
AS-LU2_1V0-zl2004
AS-LU3_1V0-zl2004
AS-MQ2_1V0-zl2004
AS-MQ3_1V0-zl2004
AS-PMB_1V1-zl2006
I2C Slave Revision
FPC 2 status:
State
Temperature Intake
Temperature Exhaust A
Temperature Exhaust B
Temperature LU 0 TSen
Temperature LU 0 Chip
Temperature LU 1 TSen
Temperature LU 1 Chip
Temperature LU 2 TSen
Temperature LU 2 Chip
Temperature LU 3 TSen
Temperature LU 3 Chip
Temperature MQ 0 TSen
Temperature MQ 0 Chip
Temperature MQ 1 TSen
Temperature MQ 1 Chip
Temperature MQ 2 TSen
Temperature MQ 2 Chip
Temperature MQ 3 TSen
Temperature MQ 3 Chip
Power
AS-BIAS3V3-zl2105
Copyright © 2013, Juniper Networks, Inc.
39
48
55
52
54
52
56
52
49
52
50
48
48
48
51
48
45
48
45
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
3291
1786
2496
1000
1000
3294
1500
1498
1003
1000
1000
995
1002
997
1000
998
1096
68
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
102
118
131
125
129
125
132
125
120
125
122
118
118
118
123
118
113
118
113
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
102
118
136
131
134
131
145
131
123
131
125
118
122
118
125
118
116
118
116
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees
48 degrees
58 degrees
55 degrees
57 degrees
55 degrees
63 degrees
55 degrees
51 degrees
55 degrees
52 degrees
48 degrees
50 degrees
48 degrees
52 degrees
48 degrees
47 degrees
48 degrees
47 degrees
3299 mV
255
PTX Series Packet Transport Switch Software Documentation
AS-VDD1V8-zl2006
AS-VDD2V5-zl2006
AS-AVDD1V0-zl2004
AS-PCIE_1V0-zl2004
AS-VDD3V3-zl2004
AS-VDD_1V5A-zl2004
AS-VDD_1V5B-zl2004
AS-LU0_1V0-zl2004
AS-LU1_1V0-zl2004
AS-MQ0_1V0-zl2004
AS-MQ1_1V0-zl2004
AS-LU2_1V0-zl2004
AS-LU3_1V0-zl2004
AS-MQ2_1V0-zl2004
AS-MQ3_1V0-zl2004
AS-PMB_1V1-zl2006
I2C Slave Revision
FPC 3 status:
State
Temperature Intake
Temperature Exhaust A
Temperature Exhaust B
Temperature LU 0 TSen
Temperature LU 0 Chip
Temperature LU 1 TSen
Temperature LU 1 Chip
Temperature LU 2 TSen
Temperature LU 2 Chip
Temperature LU 3 TSen
Temperature LU 3 Chip
Temperature MQ 0 TSen
Temperature MQ 0 Chip
Temperature MQ 1 TSen
Temperature MQ 1 Chip
Temperature MQ 2 TSen
Temperature MQ 2 Chip
Temperature MQ 3 TSen
Temperature MQ 3 Chip
Power
AS-BIAS3V3-zl2105
AS-VDD1V8-zl2006
AS-VDD2V5-zl2006
AS-AVDD1V0-zl2004
AS-PCIE_1V0-zl2004
AS-VDD3V3-zl2004
AS-VDD_1V5A-zl2004
AS-VDD_1V5B-zl2004
AS-LU0_1V0-zl2004
AS-LU1_1V0-zl2004
AS-MQ0_1V0-zl2004
AS-MQ1_1V0-zl2004
AS-LU2_1V0-zl2004
AS-LU3_1V0-zl2004
AS-MQ2_1V0-zl2004
AS-MQ3_1V0-zl2004
AS-PMB_1V1-zl2006
I2C Slave Revision
FPC 4 status:
...
256
1805
2510
999
998
3296
1492
1497
997
1000
998
1001
996
995
998
997
1100
68
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
41 degrees
48 degrees
58 degrees
56 degrees
59 degrees
56 degrees
61 degrees
56 degrees
51 degrees
56 degrees
53 degrees
50 degrees
51 degrees
50 degrees
55 degrees
50 degrees
47 degrees
50 degrees
50 degrees
3305
1810
2508
999
1001
3294
1500
1498
998
998
999
998
1000
1001
996
998
1098
68
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
105
118
136
132
138
132
141
132
123
132
127
122
123
122
131
122
116
122
122
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment fpc (MX2010 Router)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature Intake
36 degrees
Temperature Exhaust A
42 degrees
Temperature Exhaust B
51 degrees
Temperature LU 0 TSen
49 degrees
Temperature LU 0 Chip
50 degrees
Temperature LU 1 TSen
49 degrees
Temperature LU 1 Chip
54 degrees
Temperature LU 2 TSen
49 degrees
Temperature LU 2 Chip
45 degrees
Temperature LU 3 TSen
49 degrees
Temperature LU 3 Chip
46 degrees
Temperature MQ 0 TSen
40 degrees
Temperature MQ 0 Chip
41 degrees
Temperature MQ 1 TSen
40 degrees
Temperature MQ 1 Chip
44 degrees
Temperature MQ 2 TSen
40 degrees
Temperature MQ 2 Chip
38 degrees
Temperature MQ 3 TSen
40 degrees
Temperature MQ 3 Chip
41 degrees
Power
AS-BIAS3V3-zl2105
3300 mV
AS-VDD1V8-zl2006
1805 mV
AS-VDD2V5-zl2006
2505 mV
AS-AVDD1V0-zl2004
998 mV
AS-PCIE_1V0-zl2004
999 mV
AS-VDD3V3-zl2004
3303 mV
AS-VDD_1V5A-zl2004
1497 mV
AS-VDD_1V5B-zl2004
1497 mV
AS-LU0_1V0-zl2004
998 mV
AS-LU1_1V0-zl2004
1003 mV
AS-MQ0_1V0-zl2004
998 mV
AS-MQ1_1V0-zl2004
998 mV
AS-LU2_1V0-zl2004
997 mV
AS-LU3_1V0-zl2004
1001 mV
AS-MQ2_1V0-zl2004
996 mV
AS-MQ3_1V0-zl2004
994 mV
AS-PMB_1V1-zl2006
1097 mV
I2C Slave Revision
68
FPC 1 status:
State
Online
Temperature Intake
34 degrees
Temperature Exhaust A
46 degrees
Temperature Exhaust B
54 degrees
Temperature LU 0 TSen
45 degrees
Temperature LU 0 Chip
55 degrees
Temperature LU 1 TSen
45 degrees
Temperature LU 1 Chip
44 degrees
Temperature LU 2 TSen
45 degrees
Temperature LU 2 Chip
50 degrees
Temperature LU 3 TSen
45 degrees
Temperature LU 3 Chip
58 degrees
Temperature XM 0 TSen
45 degrees
Temperature XM 0 Chip
51 degrees
Temperature XF 0 TSen
45 degrees
Temperature XF 0 Chip
63 degrees
Temperature PLX Switch TSen45 degrees
Copyright © 2013, Juniper Networks, Inc.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
96 degrees F
107 degrees F
123 degrees F
120 degrees F
122 degrees F
120 degrees F
129 degrees F
120 degrees F
113 degrees F
120 degrees F
114 degrees F
104 degrees F
105 degrees F
104 degrees F
111 degrees F
104 degrees F
100 degrees F
104 degrees F
105 degrees F
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
93 degrees F
114 degrees F
129 degrees F
113 degrees F
131 degrees F
113 degrees F
111 degrees F
113 degrees F
122 degrees F
113 degrees F
136 degrees F
113 degrees F
123 degrees F
113 degrees F
145 degrees F
113 degrees F
257
PTX Series Packet Transport Switch Software Documentation
Temperature PLX Switch Chip47 degrees
Power
MPC-BIAS3V3-zl2105
3300 mV
MPC-VDD3V3-zl6100
3294 mV
MPC-VDD2V5-zl6100
2505 mV
MPC-VDD1V8-zl2004
1796 mV
MPC-AVDD1V0-zl2004
991 mV
MPC-VDD1V2-zl6100
1196 mV
MPC-VDD1V5A-zl2004
1491 mV
MPC-VDD1V5B-zl2004
1492 mV
MPC-XF_0V9-zl2004
996 mV
MPC-PCIE_1V0-zl6100
1003 mV
MPC-LU0_1V0-zl2004
996 mV
MPC-LU1_1V0-zl2004
996 mV
MPC-LU2_1V0-zl2004
998 mV
MPC-LU3_1V0-zl2004
994 mV
MPC-12VA-BMR453
12031 mV
MPC-12VB-BMR453
12003 mV
MPC-PMB_1V1-zl2006
1104 mV
MPC-PMB_1V2-zl2106
1194 mV
MPC-XM_0V9-vt273m
911 mV
I2C Slave Revision
110
FPC 8 status:
State
Online
Temperature Intake
32 degrees
Temperature Exhaust A
44 degrees
Temperature Exhaust B
37 degrees
Temperature LU 0 TCAM TSen 41 degrees
Temperature LU 0 TCAM Chip 49 degrees
Temperature LU 0 TSen
41 degrees
Temperature LU 0 Chip
52 degrees
Temperature MQ 0 TSen
41 degrees
Temperature MQ 0 Chip
47 degrees
Temperature LU 1 TCAM TSen 39 degrees
Temperature LU 1 TCAM Chip 42 degrees
Temperature LU 1 TSen
39 degrees
Temperature LU 1 Chip
46 degrees
Temperature MQ 1 TSen
39 degrees
Temperature MQ 1 Chip
45 degrees
Power
MPC-BIAS3V3-zl2105
3296 mV
MPC-VDD3V3-zl2006
3298 mV
MPC-VDD2V5-zl2006
2505 mV
MPC-TCAM_1V0-zl2004
997 mV
MPC-AVDD1V0-zl2006
1007 mV
MPC-VDD1V8-zl2006
1803 mV
MPC-PCIE_1V0-zl2006
1004 mV
MPC-LU0_1V0-zl2004
1000 mV
MPC-MQ0_1V0-zl2004
999 mV
MPC-VDD_1V5-zl2004
1498 mV
MPC-PMB_1V1-zl2006
1102 mV
MPC-9VA-BMR453
9009 mV
MPC-9VB-BMR453
8960 mV
MPC-PMB_1V2-zl2105
1202 mV
MPC-LU1_1V0-zl2004
1005 mV
MPC-MQ1_1V0-zl2004
1000 mV
I2C Slave Revision
70
FPC 9 status:
State
Online
Temperature Intake
34 degrees
Temperature Exhaust A
41 degrees
258
C / 116 degrees F
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
89 degrees F
111 degrees F
98 degrees F
105 degrees F
120 degrees F
105 degrees F
125 degrees F
105 degrees F
116 degrees F
102 degrees F
107 degrees F
102 degrees F
114 degrees F
102 degrees F
113 degrees F
C / 93 degrees F
C / 105 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Temperature Exhaust B
Temperature LU 0 TSen
Temperature LU 0 Chip
Temperature LU 1 TSen
Temperature LU 1 Chip
Temperature LU 2 TSen
Temperature LU 2 Chip
Temperature LU 3 TSen
Temperature LU 3 Chip
Temperature MQ 0 TSen
Temperature MQ 0 Chip
Temperature MQ 1 TSen
Temperature MQ 1 Chip
Temperature MQ 2 TSen
Temperature MQ 2 Chip
Temperature MQ 3 TSen
Temperature MQ 3 Chip
Power
AS-BIAS3V3-zl2105
AS-VDD1V8-zl2006
AS-VDD2V5-zl2006
AS-AVDD1V0-zl2004
AS-PCIE_1V0-zl2004
AS-VDD3V3-zl2004
AS-VDD_1V5A-zl2004
AS-VDD_1V5B-zl2004
AS-LU0_1V0-zl2004
AS-LU1_1V0-zl2004
AS-MQ0_1V0-zl2004
AS-MQ1_1V0-zl2004
AS-LU2_1V0-zl2004
AS-LU3_1V0-zl2004
AS-MQ2_1V0-zl2004
AS-MQ3_1V0-zl2004
AS-PMB_1V1-zl2006
I2C Slave Revision
54
51
52
51
55
51
47
51
47
40
42
40
44
40
38
40
40
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
3302
1808
2513
997
999
3294
1503
1502
996
999
997
999
997
998
1000
1000
1102
68
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
129
123
125
123
131
123
116
123
116
104
107
104
111
104
100
104
104
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
93 degrees F
102 degrees F
127 degrees F
123 degrees F
129 degrees F
122 degrees F
127 degrees F
118 degrees F
123 degrees F
113 degrees F
118 degrees F
113 degrees F
113 degrees F
113 degrees F
120 degrees F
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX240 Router)
user@host> show chassis environment fpc
FPC 1 status:
State
Online
Temperature Intake
34 degrees
Temperature Exhaust A
39 degrees
Temperature Exhaust B
53 degrees
Temperature I3 0 TSensor
51 degrees
Temperature I3 0 Chip
54 degrees
Temperature I3 1 TSensor
50 degrees
Temperature I3 1 Chip
53 degrees
Temperature I3 2 TSensor
48 degrees
Temperature I3 2 Chip
51 degrees
Temperature I3 3 TSensor
45 degrees
Temperature I3 3 Chip
48 degrees
Temperature IA 0 TSensor
45 degrees
Temperature IA 0 Chip
45 degrees
Temperature IA 1 TSensor
45 degrees
Temperature IA 1 Chip
49 degrees
Power
1.5 V
1492 mV
2.5 V
2507 mV
3.3 V
3306 mV
Copyright © 2013, Juniper Networks, Inc.
259
PTX Series Packet Transport Switch Software Documentation
1.8 V PFE 0
1.8 V PFE 1
1.8 V PFE 2
1.8 V PFE 3
1.2 V PFE 0
1.2 V PFE 1
1.2 V PFE 2
1.2 V PFE 3
I2C Slave Revision
FPC 2 status:
State
Temperature Intake
Temperature Exhaust A
Temperature Exhaust B
Temperature I3 0 TSensor
Temperature I3 0 Chip
Temperature I3 1 TSensor
Temperature I3 1 Chip
Temperature I3 2 TSensor
Temperature I3 2 Chip
Temperature I3 3 TSensor
Temperature I3 3 Chip
Temperature IA 0 TSensor
Temperature IA 0 Chip
Temperature IA 1 TSensor
Temperature IA 1 Chip
Power
1.5 V
2.5 V
3.3 V
1.8 V PFE 0
1.8 V PFE 1
1.8 V PFE 2
1.8 V PFE 3
1.2 V PFE 0
1.2 V PFE 1
1.2 V PFE 2
1.2 V PFE 3
I2C Slave Revision
1801
1804
1798
1798
1169
1189
1182
1176
42
mV
mV
mV
mV
mV
mV
mV
mV
Online
33 degrees
41 degrees
53 degrees
53 degrees
58 degrees
52 degrees
56 degrees
50 degrees
52 degrees
46 degrees
49 degrees
51 degrees
49 degrees
48 degrees
53 degrees
1492
2445
3293
1827
1775
1788
1798
1250
1234
1231
1192
42
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
91 degrees F
105 degrees F
127 degrees F
127 degrees F
136 degrees F
125 degrees F
132 degrees F
122 degrees F
125 degrees F
114 degrees F
120 degrees F
123 degrees F
120 degrees F
118 degrees F
127 degrees F
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
96 degrees F
105 degrees F
131 degrees F
131 degrees F
134 degrees F
127 degrees F
127 degrees F
125 degrees F
120 degrees F
116 degrees F
116 degrees F
129 degrees F
136 degrees F
118 degrees F
127 degrees F
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX480 Router)
user@host> show chassis environment fpc
FPC 1 status:
State
Online
Temperature Intake
36 degrees
Temperature Exhaust A
41 degrees
Temperature Exhaust B
55 degrees
Temperature I3 0 TSensor
55 degrees
Temperature I3 0 Chip
57 degrees
Temperature I3 1 TSensor
53 degrees
Temperature I3 1 Chip
53 degrees
Temperature I3 2 TSensor
52 degrees
Temperature I3 2 Chip
49 degrees
Temperature I3 3 TSensor
47 degrees
Temperature I3 3 Chip
47 degrees
Temperature IA 0 TSensor
54 degrees
Temperature IA 0 Chip
58 degrees
Temperature IA 1 TSensor
48 degrees
Temperature IA 1 Chip
53 degrees
Power
260
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.5 V
2.5 V
3.3 V
1.8 V PFE 0
1.8 V PFE 1
1.8 V PFE 2
1.8 V PFE 3
1.2 V PFE 0
1.2 V PFE 1
1.2 V PFE 2
1.2 V PFE 3
I2C Slave Revision
1479
2542
3319
1811
1804
1804
1814
1192
1202
1205
1189
40
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX960 Router)
user@host> show chassis environment fpc
FPC 5 status:
State
Online
Temperature Intake
27 degrees
Temperature Exhaust A
34 degrees
Temperature Exhaust B
40 degrees
Temperature I3 0 TSensor
39 degrees
Temperature I3 0 Chip
41 degrees
Temperature I3 1 TSensor
38 degrees
Temperature I3 1 Chip
37 degrees
Temperature I3 2 TSensor
37 degrees
Temperature I3 2 Chip
34 degrees
Temperature I3 3 TSensor
32 degrees
Temperature I3 3 Chip
33 degrees
Temperature IA 0 TSensor
39 degrees
Temperature IA 0 Chip
44 degrees
Temperature IA 1 TSensor
36 degrees
Temperature IA 1 Chip
44 degrees
Power
1.5 V
1479 mV
2.5 V
2523 mV
3.3 V
3254 mV
1.8 V PFE 0
1798 mV
1.8 V PFE 1
1798 mV
1.8 V PFE 2
1807 mV
1.8 V PFE 3
1791 mV
1.2 V PFE 0
1173 mV
1.2 V PFE 1
1179 mV
1.2 V PFE 2
1179 mV
1.2 V PFE 3
1185 mV
I2C Slave Revision
6
FPC 6 status:
State
Online
Temperature Intake
25 degrees
Temperature Exhaust A
38 degrees
Temperature Exhaust B
38 degrees
Temperature I3 0 TSensor
40 degrees
Temperature I3 0 Chip
40 degrees
Temperature I3 1 TSensor
40 degrees
Temperature I3 1 Chip
38 degrees
Temperature I3 2 TSensor
37 degrees
Temperature I3 2 Chip
32 degrees
Temperature I3 3 TSensor
34 degrees
Temperature I3 3 Chip
33 degrees
Temperature IA 0 TSensor
45 degrees
Temperature IA 0 Chip
47 degrees
Copyright © 2013, Juniper Networks, Inc.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
80 degrees F
93 degrees F
104 degrees F
102 degrees F
105 degrees F
100 degrees F
98 degrees F
98 degrees F
93 degrees F
89 degrees F
91 degrees F
102 degrees F
111 degrees F
96 degrees F
111 degrees F
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
77 degrees F
100 degrees F
100 degrees F
104 degrees F
104 degrees F
104 degrees F
100 degrees F
98 degrees F
89 degrees F
93 degrees F
91 degrees F
113 degrees F
116 degrees F
261
PTX Series Packet Transport Switch Software Documentation
Temperature IA 1 TSensor
Temperature IA 1 Chip
Power
1.5 V
2.5 V
3.3 V
1.8 V PFE 0
1.8 V PFE 1
1.8 V PFE 2
1.8 V PFE 3
1.2 V PFE 0
1.2 V PFE 1
1.2 V PFE 2
1.2 V PFE 3
I2C Slave Revision
37 degrees C / 98 degrees F
42 degrees C / 107 degrees F
1485
2510
3332
1801
1814
1804
1820
1192
1189
1202
1156
40
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX480 Router with 100-Gigabit Ethernet CFP)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature Intake
32 degrees
Temperature Exhaust A
39 degrees
Temperature Exhaust B
37 degrees
Temperature QX 0 TSen
44 degrees
Temperature QX 0 Chip
48 degrees
Temperature LU 0 TCAM TSen 44 degrees
Temperature LU 0 TCAM Chip 47 degrees
Temperature LU 0 TSen
44 degrees
Temperature LU 0 Chip
48 degrees
Temperature MQ 0 TSen
44 degrees
Temperature MQ 0 Chip
47 degrees
Power
MPC-BIAS3V3-zl2105
3297 mV
MPC-VDD3V3-zl2105
3306 mV
MPC-VDD2V5-zl2105
2498 mV
MPC-TCAM_1V0-zl2004
999 mV
MPC-AVDD1V0-zl2006
999 mV
MPC-VDD1V8-zl2006
1796 mV
MPC-PCIE_1V0-zl2006
1002 mV
MPC-LU0_1V0-zl2004
997 mV
MPC-MQ0_1V0-zl2004
995 mV
MPC-VDD_1V5-zl2004
1496 mV
MPC-PMB_1V1-zl2006
1094 mV
MPC-9VA-BMR453
9054 mV
MPC-9VB-BMR453
9037 mV
MPC-PMB_1V2-zl2106
1191 mV
MPC-QXM0_1V0-zl2006
1000 mV
I2C Slave Revision
66
FPC 1 status:
State
Online
Temperature Intake
35 degrees
Temperature Exhaust A
50 degrees
Temperature Exhaust B
56 degrees
Temperature LU 0 TSen
46 degrees
Temperature LU 0 Chip
59 degrees
Temperature LU 1 TSen
46 degrees
Temperature LU 1 Chip
45 degrees
Temperature LU 2 TSen
46 degrees
Temperature LU 2 Chip
60 degrees
Temperature LU 3 TSen
46 degrees
262
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
89 degrees F
102 degrees F
98 degrees F
111 degrees F
118 degrees F
111 degrees F
116 degrees F
111 degrees F
118 degrees F
111 degrees F
116 degrees F
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
95 degrees F
122 degrees F
132 degrees F
114 degrees F
138 degrees F
114 degrees F
113 degrees F
114 degrees F
140 degrees F
114 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Temperature LU 3 Chip
Temperature XM 0 TSen
Temperature XM 0 Chip
Temperature XF 0 TSen
Temperature XF 0 Chip
Power
MPC-BIAS3V3-zl2105
MPC-VDD3V3-zl6100
MPC-VDD2V5-zl6100
MPC-VDD1V8-zl2004
MPC-AVDD1V0-zl2006
MPC-VDD1V2-zl6100
MPC-VDD1V5A-zl2004
MPC-VDD1V5B-zl2004
MPC-XF_0V9-zl2006
MPC-PCIE_1V0-zl6100
MPC-LU0_1V0-zl2004
MPC-LU1_1V0-zl2004
MPC-LU2_1V0-zl2004
MPC-LU3_1V0-zl2004
MPC-12VA-BMR453
MPC-12VB-BMR453
MPC-PMB_1V1-zl2006
MPC-PMB_1V2-zl2106
MPC-XM_0V9-vt273m
I2C Slave Revision
71 degrees C / 159 degrees F
46 degrees C / 114 degrees F
-18 degrees C / 0 degrees F
46 degrees C / 114 degrees F
76 degrees C / 168 degrees F
3292
3303
2501
1801
996
1199
1493
1498
996
1000
994
994
992
993
12003
12043
1091
1196
899
106
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (MX240, MX480, MX960 with Application Services Modular Line Card
user@host>show chassis environment fpc 1
FPC 1 status:
State
Online
Temperature Intake
36 degrees
Temperature Exhaust A
39 degrees
Temperature LU TSen
52 degrees
Temperature LU Chip
54 degrees
Temperature XM TSen
52 degrees
Temperature XM Chip
60 degrees
Temperature PCIe TSen
52 degrees
Temperature PCIe Chip
69 degrees
Power
MPC-BIAS3V3-zl2106
3302 mV
MPC-VDD3V3-zl6100
3325 mV
MPC-AVDD1V0-zl6100
1007 mV
MPC-PCIE_1V0-zl6100
904 mV
MPC-LU0_1V0-zl2004
996 mV
MPC-VDD_1V5-zl2004
1498 mV
MPC-12VA-BMR453
11733 mV
MPC-12VB-BMR453
11728 mV
MPC-XM_0V9-vt273m
900 mV
I2C Slave Revision
81
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
96 degrees F
102 degrees F
125 degrees F
129 degrees F
125 degrees F
140 degrees F
125 degrees F
156 degrees F
show chassis environment fpc (T320, T640, and T1600 Routers)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Temperature Top
42 degrees C / 107 degrees F
Temperature Bottom
36 degrees C / 96 degrees F
Temperature MMB1
39 degrees C / 102 degrees F
Power:
Copyright © 2013, Juniper Networks, Inc.
263
PTX Series Packet Transport Switch Software Documentation
1.8 V
2.5 V
3.3 V
5.0 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
BUS Revision
FPC 1 status:
State
Temperature Top
Temperature Bottom
Temperature MMB1
Power:
1.8 V
2.5 V
3.3 V
5.0 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
BUS Revision
FPC 2 status:
State
Temperature Top
Temperature Bottom
Temperature MMB1
Power:
1.8 V
2.5 V
3.3 V
5.0 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
BUS Revision
1959
2495
3344
5047
1787
3291
4998
7343
40
mV
mV
mV
mV
mV
mV
mV
mV
Online
42 degrees C / 107 degrees F
39 degrees C / 102 degrees F
40 degrees C / 104 degrees F
1956
2498
3340
5023
1782
3277
4989
7289
40
mV
mV
mV
mV
mV
mV
mV
mV
Online
43 degrees C / 109 degrees F
39 degrees C / 102 degrees F
41 degrees C / 105 degrees F
1963
2503
3340
5042
1797
3311
5013
7221
40
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc (T4000 Router)
user@host> show chassis environment fpc
FPC 0 status:
State
Online
Fan Intake
34 degrees
Fan Exhaust
48 degrees
PMB
47 degrees
LMB0
50 degrees
LMB1
41 degrees
LMB2
35 degrees
PFE1 LU2
46 degrees
PFE1 LU0
41 degrees
PFE0 LU0
57 degrees
XF1
47 degrees
XF0
52 degrees
XM1
41 degrees
XM0
50 degrees
PFE0 LU1
56 degrees
PFE0 LU2
45 degrees
PFE1 LU1
37 degrees
264
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
93 degrees F
118 degrees F
116 degrees F
122 degrees F
105 degrees F
95 degrees F
114 degrees F
105 degrees F
134 degrees F
116 degrees F
125 degrees F
105 degrees F
122 degrees F
132 degrees F
113 degrees F
98 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Power 1
1.0 V
1.2 V bias
1.8 V
2.5 V
3.3 V
3.3 V bias
12.0 V A
12.0 V B
Power 2
0.9 V
0.9 V PFE0
0.9 V PFE1
1.0 V PFE0
1.0 V PFE1
1.1 V
1.5 V_0
1.5 V_1
Power 3
1.0 V PFE0
1.0 V PFE1
1.0 V PFE0 *
1.0 V PFE1 *
1.8 V PFE 0
1.8 V PFE 1
2.5 V
12.0 V
Power 4
1.0 V PFE0 LU0
1.0 V PFE1 LU0
1.0 V PFE1 LU2
1.0 V PFE0 LU0 *
1.0 V PFE1 LU0 *
1.0 V PFE1 LU2 *
12.0 V
12.0 V C
Power (Base/PMB/MMB)
LMB0 VDD2V5
LMB0 VDD1V8
LMB0 VDD1V5
LMB0 PFE0 LU0 AVDD1V0
LMB0 PFE0 LU0 VDD1V0
LMB0 VDD12V0
LMB1 VDD2V5
LMB1 VDD1V8
LMB1 VDD1V5
LMB1 PFE0 LU2 AVDD1V0
LMB1 PFE0 LU2 VDD1V0
LMB1 VDD12V0
LMB2 VDD2V5
LMB2 VDD1V8
LMB2 VDD1V5
LMB2 PFE1 LU1 AVDD1V0
LMB2 PFE1 LU1 VDD1V0
LMB2 VDD12V0
PMB 1.05v
PMB 1.5v
PMB 2.5v
PMB 3.3v
Bus Revision
FPC 3 status:
Copyright © 2013, Juniper Networks, Inc.
991
1195
1788
2483
3289
3299
10608
10637
mV
mV
mV
mV
mV
mV
mV
mV
881
916
903
1012
1002
1095
1494
1479
mV
mV
mV
mV
mV
mV
mV
mV
1000
1002
995
995
1788
1789
2482
11614
mV
mV
mV
mV
mV
mV
mV
mV
1003
1003
1004
995
998
996
11643
11711
mV
mV
mV
mV
mV
mV
mV
mV
2488
1788
1496
1002
1000
10752
2472
1792
1480
994
1002
10800
2472
1792
1486
996
998
10704
1049
1500
2500
3299
113
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
265
PTX Series Packet Transport Switch Software Documentation
State
Fan Intake
Fan Exhaust
PMB
LMB0
LMB1
LMB2
PFE1 LU2
PFE1 LU0
PFE0 LU0
XF1
XF0
XM1
XM0
PFE0 LU1
PFE0 LU2
PFE1 LU1
Power 1
1.0 V
1.2 V bias
1.8 V
2.5 V
3.3 V
3.3 V bias
12.0 V A
12.0 V B
Power 2
0.9 V
0.9 V PFE0
0.9 V PFE1
1.0 V PFE0
1.0 V PFE1
1.1 V
1.5 V_0
1.5 V_1
Power 3
0.92 V PFE1
1.0 V PFE0
1.0 V PFE0 *
1.0 V PFE1 *
1.8 V PFE 0
1.8 V PFE 1
2.5 V
12.0 V
Power 4
1.0 V PFE0 LU0
1.0 V PFE1 LU0
1.0 V PFE1 LU2
1.0 V PFE0 LU0 *
1.0 V PFE1 LU0 *
1.0 V PFE1 LU2 *
12.0 V
12.0 V C
Power (Base/PMB/MMB)
LMB0 VDD2V5
LMB0 VDD1V8
LMB0 VDD1V5
LMB0 PFE0 LU0 AVDD1V0
LMB0 PFE0 LU0 VDD1V0
LMB0 VDD12V0
LMB1 VDD2V5
266
Online
37 degrees
51 degrees
43 degrees
57 degrees
54 degrees
38 degrees
63 degrees
45 degrees
69 degrees
62 degrees
63 degrees
43 degrees
67 degrees
63 degrees
66 degrees
41 degrees
1002
1201
1785
2485
3288
3285
10412
10515
mV
mV
mV
mV
mV
mV
mV
mV
882
920
905
1015
1001
1094
1495
1478
mV
mV
mV
mV
mV
mV
mV
mV
998
997
992
991
1780
1797
2492
11604
mV
mV
mV
mV
mV
mV
mV
mV
1003
1004
1003
1000
1001
1003
11653
11672
mV
mV
mV
mV
mV
mV
mV
mV
2512
1790
1500
1004
1002
10608
2472
mV
mV
mV
mV
mV
mV
mV
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
98 degrees F
123 degrees F
109 degrees F
134 degrees F
129 degrees F
100 degrees F
145 degrees F
113 degrees F
156 degrees F
143 degrees F
145 degrees F
109 degrees F
152 degrees F
145 degrees F
150 degrees F
105 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
LMB1 VDD1V8
LMB1 VDD1V5
LMB1 PFE0 LU2 AVDD1V0
LMB1 PFE0 LU2 VDD1V0
LMB1 VDD12V0
LMB2 VDD2V5
LMB2 VDD1V8
LMB2 VDD1V5
LMB2 PFE1 LU1 AVDD1V0
LMB2 PFE1 LU1 VDD1V0
LMB2 VDD12V0
PMB 1.05v
PMB 1.5v
PMB 2.5v
PMB 3.3v
Bus Revision
FPC 5 status:
State
Temperature Top
Temperature Bottom
Power
1.8 V
1.8 V bias
3.3 V
3.3 V bias
5.0 V bias
5.0 V TOP
8.0 V bias
Power (Base/PMB/MMB)
1.2 V
1.5 V
5.0 V BOT
12.0 V TOP Base
12.0 V BOT Base
1.1 V PMB
1.2 V PMB
1.5 V PMB
1.8 V PMB
2.5 V PMB
3.3 V PMB
5.0 V PMB
12.0 V PMB
0.75 MMB TOP
1.5 V MMB TOP
1.8 V MMB TOP
2.5 V MMB TOP
1.2 V MMB TOP
5.0 V MMB TOP
12.0 V MMB TOP
3.3 V MMB TOP
0.75 MMB BOT
1.5 V MMB BOT
1.8 V MMB BOT
2.5 V MMB BOT
1.2 V MMB BOT
5.0 V MMB BOT
12.0 V MMB BOT
3.3 V MMB BOT
APS 00
APS 01
APS 02
Copyright © 2013, Juniper Networks, Inc.
1788
1480
1000
1004
10672
2488
1798
1494
1000
1004
10528
1050
1500
2499
3299
113
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
38 degrees C / 100 degrees F
1804
1802
3294
3277
5008
5067
6642
mV
mV
mV
mV
mV
mV
mV
1202
1504
5079
11848
11780
1111
1189
1494
1819
2503
3294
5035
11788
766
1484
1772
2485
1137
4946
11772
3289
759
1482
1792
2490
1145
4922
11625
3282
2495
3308
3301
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
267
PTX Series Packet Transport Switch Software Documentation
5.0 V PIC 0
APS 10
APS 11
APS 12
5.0 V PIC 1
Bus Revision
FPC 6 status:
State
Fan Intake
Fan Exhaust
PMB
LMB0
LMB1
LMB2
PFE1 LU2
PFE1 LU0
PFE0 LU0
XF1
XF0
XM1
XM0
PFE0 LU1
PFE0 LU2
PFE1 LU1
Power 1
1.0 V
1.2 V bias
1.8 V
2.5 V
3.3 V
3.3 V bias
12.0 V A
12.0 V B
Power 2
0.9 V
0.9 V PFE0
0.9 V PFE1
1.0 V PFE0
1.0 V PFE1
1.1 V
1.5 V_0
1.5 V_1
Power 3
1.0 V PFE0
1.0 V PFE1
1.0 V PFE0 *
1.0 V PFE1 *
1.8 V PFE 0
1.8 V PFE 1
2.5 V
12.0 V
Power 4
1.0 V PFE0 LU0
1.0 V PFE1 LU0
1.0 V PFE1 LU2
1.0 V PFE0 LU0 *
1.0 V PFE1 LU0 *
1.0 V PFE1 LU2 *
12.0 V
12.0 V C
Power (Base/PMB/MMB)
268
4967
2512
3316
3304
5081
49
mV
mV
mV
mV
mV
Online
34 degrees
49 degrees
40 degrees
60 degrees
58 degrees
40 degrees
69 degrees
45 degrees
71 degrees
58 degrees
65 degrees
40 degrees
66 degrees
69 degrees
68 degrees
42 degrees
998
1191
1781
2487
3302
3300
10388
10388
mV
mV
mV
mV
mV
mV
mV
mV
902
921
907
996
974
1095
1495
1478
mV
mV
mV
mV
mV
mV
mV
mV
997
998
993
991
1796
1789
2465
11609
mV
mV
mV
mV
mV
mV
mV
mV
1003
1006
1002
1000
998
998
11638
11702
mV
mV
mV
mV
mV
mV
mV
mV
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
93 degrees F
120 degrees F
104 degrees F
140 degrees F
136 degrees F
104 degrees F
156 degrees F
113 degrees F
159 degrees F
136 degrees F
149 degrees F
104 degrees F
150 degrees F
156 degrees F
154 degrees F
107 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
LMB0 VDD2V5
LMB0 VDD1V8
LMB0 VDD1V5
LMB0 PFE0 LU0
LMB0 PFE0 LU0
LMB0 VDD12V0
LMB1 VDD2V5
LMB1 VDD1V8
LMB1 VDD1V5
LMB1 PFE0 LU2
LMB1 PFE0 LU2
LMB1 VDD12V0
LMB2 VDD2V5
LMB2 VDD1V8
LMB2 VDD1V5
LMB2 PFE1 LU1
LMB2 PFE1 LU1
LMB2 VDD12V0
PMB 1.05v
PMB 1.5v
PMB 2.5v
PMB 3.3v
Bus Revision
AVDD1V0
VDD1V0
AVDD1V0
VDD1V0
AVDD1V0
VDD1V0
2484
1780
1496
998
1004
10528
2472
1776
1474
994
1004
10544
2476
1790
1492
996
1010
10528
1050
1499
2500
3300
80
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment fpc lcc (TX Matrix Router)
user@host> show chassis environment fpc lcc 0
lcc0-re0:
-------------------------------------------------------------------------FPC 1 status:
State
Online
Temperature Top
30 degrees C / 86 degrees F
Temperature Bottom
25 degrees C / 77 degrees F
Temperature MMB0
Absent
Temperature MMB1
27 degrees C / 80 degrees F
Power:
1.8 V
1813 mV
2.5 V
2504 mV
3.3 V
3338 mV
5.0 V
5037 mV
1.8 V bias
1797 mV
3.3 V bias
3301 mV
5.0 V bias
5013 mV
8.0 V bias
7345 mV
BUS Revision
40
FPC 2 status:
State
Online
Temperature Top
37 degrees C / 98 degrees F
Temperature Bottom
26 degrees C / 78 degrees F
Temperature MMB0
32 degrees C / 89 degrees F
Temperature MMB1
27 degrees C / 80 degrees F
Power:
1.8 V
1791 mV
2.5 V
2517 mV
3.3 V
3308 mV
5.0 V
5052 mV
1.8 V bias
1797 mV
3.3 V bias
3289 mV
5.0 V bias
4991 mV
Copyright © 2013, Juniper Networks, Inc.
269
PTX Series Packet Transport Switch Software Documentation
8.0 V bias
BUS Revision
7477 mV
40
show chassis environment fpc lcc (TX Matrix Plus Router)
user@host> show chassis environment fpc lcc 0
lcc0-re0:
-------------------------------------------------------------------------FPC 1 status:
State
Online
Temperature Top
46 degrees C / 114 degrees F
Temperature Bottom
47 degrees C / 116 degrees F
Power
1.8 V
1788 mV
1.8 V bias
1787 mV
3.3 V
3321 mV
3.3 V bias
3306 mV
5.0 V bias
5018 mV
5.0 V TOP
5037 mV
8.0 V bias
7223 mV
Power (Base/PMB/MMB)
1.2 V
1205 mV
1.5 V
1503 mV
5.0 V BOT
5084 mV
12.0 V TOP Base
11775 mV
12.0 V BOT Base
11794 mV
1.1 V PMB
1108 mV
1.2 V PMB
1196 mV
1.5 V PMB
1499 mV
1.8 V PMB
1811 mV
2.5 V PMB
2515 mV
3.3 V PMB
3318 mV
5.0 V PMB
5030 mV
12.0 V PMB
11832 mV
0.75 MMB TOP
752 mV
1.5 V MMB TOP
1489 mV
1.8 V MMB TOP
1782 mV
2.5 V MMB TOP
2498 mV
1.2 V MMB TOP
1155 mV
5.0 V MMB TOP
4902 mV
12.0 V MMB TOP
11721 mV
3.3 V MMB TOP
3316 mV
0.75 MMB BOT
754 mV
1.5 V MMB BOT
1482 mV
1.8 V MMB BOT
1758 mV
2.5 V MMB BOT
2488 mV
1.2 V MMB BOT
1157 mV
5.0 V MMB BOT
4962 mV
12.0 V MMB BOT
11691 mV
3.3 V MMB BOT
3308 mV
APS 00
1484 mV
APS 01
2503 mV
APS 02
3313 mV
5.0 V PIC 0
5025 mV
APS 10
1501 mV
APS 11
2466 mV
APS 12
3311 mV
5.0 V PIC 1
5081 mV
Bus Revision
49
270
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment fpc (QFX Series)
user@switch> show chassis environment fpc 0
FPC 0 status:
State
Online
Temperature
42 degrees C / 107 degrees F
show chassis environment fpc interconnect-device (QFabric Systems)
user@switch> show chassis environment fpc interconnect-device interconnect1 0
FC 0 FPC 0 status:
State
Online
Left Intake Temperature
24 degrees C / 75 degrees F
Right Intake Temperature
24 degrees C / 75 degrees F
Left Exhaust Temperature
27 degrees C / 80 degrees F
Right Exhaust Temperature 27 degrees C / 80 degrees F
Power
BIAS 3V3
3330 mV
VDD 3V3
3300 mV
VDD 2V5
2502 mV
VDD 1V5
1496 mV
VDD 1V2
1194 mV
VDD 1V0
1000 mV
SW0 VDD 1V0
1020 mV
SW0 CVDD 1V025
1032 mV
SW1 VDD 1V0
1022 mV
SW1 CVDD 1V025
1030 mV
VDD 12V0 DIV3_33
3414 mV
show chassis environment fpc 0 (PTX5000 Packet Transport Switch)
user@switch> show chassis environment fpc 0
FPC 0 status:
State
Online
PMB Temperature
35 degrees C
Intake Temperature
33 degrees C
Exhaust A Temperature
51 degrees C
Exhaust B Temperature
43 degrees C
TL0 Temperature
48 degrees C
TQ0 Temperature
53 degrees C
TL1 Temperature
56 degrees C
TQ1 Temperature
58 degrees C
TL2 Temperature
55 degrees C
TQ2 Temperature
57 degrees C
TL3 Temperature
59 degrees C
TQ3 Temperature
59 degrees C
Power
PMB
1.05v
1049 mV
PMB
1.5v
1500 mV
PMB
2.5v
2500 mV
PMB
3.3v
3299 mV
PFE0 1.5v
1500 mV
PFE0 1.0v
999 mV
TQ0
0.9v
900 mV
TL0
0.9v
900 mV
PFE1 1.5v
1499 mV
PFE1 1.0v
999 mV
TQ1
0.9v
899 mV
TL1
0.9v
900 mV
PFE2 1.5v
1500 mV
PFE2 1.0v
1000 mV
Copyright © 2013, Juniper Networks, Inc.
/
/
/
/
/
/
/
/
/
/
/
/
95 degrees F
91 degrees F
123 degrees F
109 degrees F
118 degrees F
127 degrees F
132 degrees F
136 degrees F
131 degrees F
134 degrees F
138 degrees F
138 degrees F
271
PTX Series Packet Transport Switch Software Documentation
TQ2
0.9v
TL2
0.9v
PFE3 1.5v
PFE3 1.0v
TQ3
0.9v
TL3
0.9v
Bias 3.3v
FPC
3.3v
FPC
2.5v
SAM
0.9v
A
12.0v
B
12.0v
900
900
1499
1000
900
900
3327
3300
2500
900
2014
2030
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment FPC 1 (MX Routers with Media Services Blade [MSB])
user@switch> show chassis environment fpc 1
FPC 1 status:
State
Online
Temperature Intake
36 degrees
Temperature Exhaust A
39 degrees
Temperature LU TSen
52 degrees
Temperature LU Chip
54 degrees
Temperature XM TSen
52 degrees
Temperature XM Chip
60 degrees
Temperature PCIe TSen
52 degrees
Temperature PCIe Chip
69 degrees
Power
MPC-BIAS3V3-zl2106
3302 mV
MPC-VDD3V3-zl6100
3325 mV
MPC-AVDD1V0-zl6100
1007 mV
MPC-PCIE_1V0-zl6100
904 mV
MPC-LU0_1V0-zl2004
996 mV
MPC-VDD_1V5-zl2004
1498 mV
MPC-12VA-BMR453
11733 mV
MPC-12VB-BMR453
11728 mV
MPC-XM_0V9-vt273m
900 mV
I2C Slave Revision
81
272
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
96 degrees F
102 degrees F
125 degrees F
129 degrees F
125 degrees F
140 degrees F
125 degrees F
156 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment fpm
Syntax
show chassis environment fpm
Syntax (TX Matrix
Routers)
show chassis environment fpm
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
show chassis environment fpm
<lcc number | sfc number>
Release Information
Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M40e, M120, M160, M320, MX Series, and T Series routers and the PTX Series Packet
Transport Switches only) Display environmental information about the front panel module
in the router.
Options
none—(TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, display
environmental information about the front panel modules (craft interfaces) on the
TX Matrix router and its attached T640 routers. On a TX Matrix Plus router, display
environmental information about the front panel modules (craft interfaces) on the
TX Matrix Plus router and its attached T1600 routers.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display environmental information about the front panel module (craft interface)
on a specified T640 router (or line-card chassis) that is connected to the TX Matrix
router. On a TX Matrix Plus router, display environmental information about the front
panel module (craft interface) on a specified T1600 router (or line-card chassis)
that is connected to a TX Matrix Plus router. Replace number with a value from
0 through 3.
scc—(TX Matrix router only) (Optional) Display environmental information about the
front panel module (craft interface) on the TX Matrix router (or switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display environmental information
about the front panel module (craft interface) on the TX Matrix Plus router
(or switch-fabric chassis).
Required Privilege
Level
Related
Documentation
List of Sample Output
view
•
request chassis fpm resync
show chassis environment fpm (M40e and M160 Routers) on page 275
show chassis environment fpm (M320 Router) on page 275
Copyright © 2013, Juniper Networks, Inc.
273
PTX Series Packet Transport Switch Software Documentation
show chassis environment fpm (MX2010 Router) on page 275
show chassis environment fpm (MX2020 Router) on page 275
show chassis environment fpm (MX240 Router) on page 275
show chassis environment fpm (MX480 Router) on page 275
show chassis environment fpm (T Series Routers) on page 275
show chassis environment fpm lcc (TX Matrix Router) on page 276
show chassis environment fpm scc (TX Matrix Router) on page 276
show chassis environment fpm sfc (TX Matrix Plus Router) on page 276
show chassis environment fpm (T4000 Core Router) on page 277
show chassis environment fpm (PTX5000 Packet Transport Switch) on page 278
Output Fields
Table 19 on page 274 lists the output fields for the show chassis environment fpm command.
Output fields are listed in the approximate order in which they appear.
Table 19: show chassis environment fpm Output Fields
Field Name
Field Description
State
FPM status:
•
Online—FPM is online and running.
•
Offline—FPM is powered down.
FPM CMB Voltage
(M40e and M160 routers only) Information about the voltage supplied to the FPM chassis management
bus (CMB) device. The left column displays the required power, in volts. The right column displays
the measured power, in millivolts.
FPM GBUS Voltage
(M320 and T Series routers only) Information about the voltage supplied to the FPM generic bus
(GBUS) device. The left column displays the required power, in volts. The right column displays the
measured power, in millivolts.
FPM I2CS Voltage
(PTX Series only) Information about the voltage supplied to the FPM generic bus (I2CS) device. The
left column displays the required power, in volts. The right column displays the measured power, in
millivolts.
FPM Display Voltage
Information about the voltage supplied to the FPM display. The left column displays the required
power, in volts. The right column displays the measured power, in millivolts.
FPM CMB Temperature
(M40e and M160 routers only) Temperature of the air flowing past the FPM CMB device
FPM GBUS
Temperature
(M320 and T Series routers only) Temperature of the air flowing past the FPM GBUS device.
FPM I2CS Temperature
(PTX Series only) Temperature of the air flowing past the FPM I2CS device.
FPM Display
Temperature
Temperature of the air flowing past the FPM display.
CMB Revision
(M40e and M160 routers only) Revision level of the CMB device.
GBUS Revision
(M320 and T Series routers only) Revision level of the GBUS device.
I2CS Revision
(MX2010 routers, MX2020 routers, and PTX Series only) Revision level of the I2CS device.
274
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Sample Output
show chassis environment fpm (M40e and M160 Routers)
user@host> show chassis environment fpm
FPM status:
State
Online
FPM CMB Voltage:
5.0 V bias
5030 mV
8.0 V bias
8083 mV
FPM Display Voltage:
5.0 V bias
4998 mV
FPM CMB temperature
34 degrees C / 93 degrees F
FPM Display temperature 35 degrees C / 95 degrees F
CMB Revision
12
show chassis environment fpm (M320 Router)
user@host> show chassis environment fpm
FPM status:
State
Online
FPM GBUS Voltage:
5.0 V
5006 mV
1.8 V bias
1799 mV
3.3 V bias
3294 mV
5.0 V bias
4998 mV
8.0 V bias
7682 mV
FPM GBUS temperature
30 degrees C / 86 degrees F
GBUS Revision
51
show chassis environment fpm (MX2010 Router)
user@host > show chassis environment fpm
FPM status:
State
Online
I2CS Revision
4
show chassis environment fpm (MX2020 Router)
user@host > show chassis environment fpm
FPM status:
State
Online
I2CS Revision
3
show chassis environment fpm (MX240 Router)
user@host> show chassis environment fpm
FPM status:
State
Online
I2CS Revision
41
show chassis environment fpm (MX480 Router)
user@host> show chassis environment fpm
FPM status:
State
Online
I2CS Revision
41
show chassis environment fpm (T Series Routers)
user@host> show chassis environment fpm
Copyright © 2013, Juniper Networks, Inc.
275
PTX Series Packet Transport Switch Software Documentation
FPM status:
State
FPM GBUS Voltage:
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
FPM Display Voltage:
5.0 V
FPM GBUS temperature
FPM Display temperature
GBUS Revision
Online
1787
3286
4991
7162
mV
mV
mV
mV
4996 mV
29 degrees C / 84 degrees F
26 degrees C / 78 degrees F
37
show chassis environment fpm lcc (TX Matrix Router)
user@host> show chassis environment fpm lcc 0
lcc0-re0:
-------------------------------------------------------------------------FPM status:
State
Online
FPM GBUS Voltage:
1.8 V bias
1797 mV
3.3 V bias
3294 mV
5.0 V bias
5015 mV
8.0 V bias
7470 mV
FPM Display Voltage:
5.0 V
5018 mV
FPM GBUS temperature
25 degrees C / 77 degrees F
FPM Display temperature
29 degrees C / 84 degrees F
GBUS Revision
37
show chassis environment fpm scc (TX Matrix Router)
user@host> show chassis environment fpm scc
scc-re0:
-------------------------------------------------------------------------FPM status:
State
Online
FPM GBUS Voltage:
1.8 V bias
1789 mV
3.3 V bias
3296 mV
5.0 V bias
5003 mV
8.0 V bias
7592 mV
FPM Display Voltage:
5.0 V
5010 mV
FPM GBUS temperature
22 degrees C / 71 degrees F
FPM Display temperature
27 degrees C / 80 degrees F
GBUS Revision
37
show chassis environment fpm sfc (TX Matrix Plus Router)
user@host> show chassis environment fpm sfc
sfc0-re0:
-------------------------------------------------------------------------FPM status:
State
Online
FPM I2CS Voltage:
3.3 V
3300 mV
5.0 V
5001 mV
9.0 V FPD
8672 mV
FPM I2CS temperature
33 degrees C / 91 degrees F
276
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
I2CS Revision
69
lcc0-re0:
-------------------------------------------------------------------------FPM status:
State
Online
FPM GBUS Voltage:
1.8 V bias
1802 mV
3.3 V bias
3301 mV
5.0 V bias
4984 mV
8.0 V bias
7377 mV
FPM Display Voltage:
5.0 V
5015 mV
FPM GBUS temperature
30 degrees C / 86 degrees F
FPM Display temperature
32 degrees C / 89 degrees F
GBUS Revision
37
lcc1-re0:
-------------------------------------------------------------------------FPM status:
State
Online
FPM GBUS Voltage:
1.8 V bias
1789 mV
3.3 V bias
3311 mV
5.0 V bias
5013 mV
8.0 V bias
7467 mV
FPM Display Voltage:
5.0 V
5015 mV
FPM GBUS temperature
29 degrees C / 84 degrees F
FPM Display temperature
31 degrees C / 87 degrees F
GBUS Revision
37
show chassis environment fpm (T4000 Core Router)
user@host> show chassis environment fpm
CB 0 status:
State
Online Master
Temperature
34 degrees C / 93 degrees F
Power 1
1.8 V
1804 mV
2.5 V
2499 mV
3.3 V
3317 mV
3.3 V bias
3291 mV
4.6 V
4663 mV
5.0 V
4905 mV
8.0 V bias
7658 mV
12.0 V
11877 mV
Power 2
1.0 V
996 mV
1.2 V
1207 mV
3.3 V RE
3354 mV
Bus Revision
51
FPGA Revision
5
CB 1 status:
State
Online Standby
Temperature
36 degrees C / 96 degrees F
Power 1
1.8 V
1791 mV
2.5 V
2494 mV
3.3 V
3321 mV
3.3 V bias
3301 mV
Copyright © 2013, Juniper Networks, Inc.
277
PTX Series Packet Transport Switch Software Documentation
4.6 V
5.0 V
8.0 V bias
12.0 V
Power 2
1.0 V
1.2 V
3.3 V RE
Bus Revision
FPGA Revision
4666
4945
7645
11897
mV
mV
mV
mV
991 mV
1201 mV
3289 mV
51
5
user@host> show chassis environment fpm
FPM status:
State
Online
FPM GBUS Voltage:
1.8 V bias
1802 mV
3.3 V bias
3294 mV
5.0 V bias
5003 mV
8.0 V bias
7306 mV
FPM Display Voltage:
5.0 V
5010 mV
FPM GBUS temperature
26 degrees C / 78 degrees F
FPM Display temperature
29 degrees C / 84 degrees F
GBUS Revision
37
show chassis environment fpm (PTX5000 Packet Transport Switch)
user@host> show chassis environment fpm
FPM status:
State
FPM I2CS Voltage:
3.3 V
5.0 V
FPM I2CS temperature
I2CS Revision
278
Online
3300 mV
4975 mV
37 degrees C / 98 degrees F
109
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment monitored
Syntax
show chassis environment monitored
Release Information
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(PTX Series Packet Transport Switches, and MX2010 and MX2020 routers) Display
status information for monitored temperatures.
On the PTX Series Packet Transport Switches, and on MX2010 and MX2020 routers, you
can configure which temperatures are monitored for computing temperature alarms.
Use this command to display only the temperatures that are monitored. Temperatures
that are not included in the temperature alarm computations are not displayed.
Options
This command has no options.
Required Privilege
Level
view
List of Sample Output
show chassis environment monitored (PTX5000 Packet Transport Switch) on page 279
show chassis environment monitored (MX2010 Router) on page 280
show chassis environment monitored (MX2020 Router) on page 282
Output Fields
Table 20 on page 279 lists the output fields for the show chassis environment monitored
command. Output fields are listed in the approximate order in which they appear.
Table 20: show chassis environment monitored Output Fields
Field Name
Field Description
Item
Chassis component:
•
(PTX Series Packet Transport Switches, and MX2010 and MX2020 routers)—Information about
the chassis, Routing Engines, Control Boards (CBs), Switch Interface Boards (SIBs), PICs, and
Flexible PIC Concentrators (FPCs).
Status
Status of the specified item. Status can be OK or Alarm.
Measurement
Temperature of the air flowing past the specified chassis component. Temperature is displayed in
degrees Celsius (C) and degrees Fahrenheit (F).
Sample Output
show chassis environment monitored (PTX5000 Packet Transport Switch)
user@host> show chassis environment monitored
Class Item
Status
Routing Engine 0 CPU
OK
Routing Engine 1 CPU
OK
CB 0 Exhaust A
OK
CB 0 Exhaust B
OK
Copyright © 2013, Juniper Networks, Inc.
Measurement
71 degrees C
62 degrees C
45 degrees C
41 degrees C
/
/
/
/
159
143
113
105
degrees
degrees
degrees
degrees
F
F
F
F
279
PTX Series Packet Transport Switch Software Documentation
CB 1 Exhaust A
CB 1 Exhaust B
OK
OK
39 degrees C / 102 degrees F
36 degrees C / 96 degrees F
show chassis environment monitored (MX2010 Router)
user@host > show chassis environment monitored
Class Item
Status
Temp CB 0 IntakeA-Zone0
OK
CB 0 IntakeB-Zone1
OK
CB 0 IntakeC-Zone0
OK
CB 0 ExhaustA-Zone0
OK
CB 0 ExhaustB-Zone1
OK
CB 0 TCBC-Zone0
OK
CB 1 IntakeA-Zone0
OK
CB 1 IntakeB-Zone1
OK
CB 1 IntakeC-Zone0
OK
CB 1 ExhaustA-Zone0
OK
CB 1 ExhaustB-Zone1
OK
CB 1 TCBC-Zone0
OK
SPMB 0 Intake
OK
SPMB 1 Intake
OK
Routing Engine 0 CPU
OK
Routing Engine 1 CPU
Present
SFB 0 Intake-Zone0
OK
SFB 0 Exhaust-Zone1
OK
SFB 0 IntakeA-Zone0
OK
SFB 0 IntakeB-Zone1
OK
SFB 0 Exhaust-Zone0
OK
SFB 0 SFB-XF2-Zone1
OK
SFB 0 SFB-XF1-Zone0
OK
SFB 0 SFB-XF0-Zone0
OK
SFB 1 Intake-Zone0
OK
SFB 1 Exhaust-Zone1
OK
SFB 1 IntakeA-Zone0
OK
SFB 1 IntakeB-Zone1
OK
SFB 1 Exhaust-Zone0
OK
SFB 1 SFB-XF2-Zone1
OK
SFB 1 SFB-XF1-Zone0
OK
SFB 1 SFB-XF0-Zone0
OK
SFB 2 Intake-Zone0
OK
SFB 2 Exhaust-Zone1
OK
SFB 2 IntakeA-Zone0
OK
SFB 2 IntakeB-Zone1
OK
SFB 2 Exhaust-Zone0
OK
SFB 2 SFB-XF2-Zone1
OK
SFB 2 SFB-XF1-Zone0
OK
SFB 2 SFB-XF0-Zone0
OK
SFB 3 Intake-Zone0
OK
SFB 3 Exhaust-Zone1
OK
SFB 3 IntakeA-Zone0
OK
SFB 3 IntakeB-Zone1
OK
SFB 3 Exhaust-Zone0
OK
SFB 3 SFB-XF2-Zone1
OK
SFB 3 SFB-XF1-Zone0
OK
SFB 3 SFB-XF0-Zone0
OK
SFB 4 Intake-Zone0
OK
SFB 4 Exhaust-Zone1
OK
SFB 4 IntakeA-Zone0
OK
SFB 4 IntakeB-Zone1
OK
SFB 4 Exhaust-Zone0
OK
280
Measurement
37 degrees C
31 degrees C
39 degrees C
36 degrees C
32 degrees C
34 degrees C
36 degrees C
28 degrees C
38 degrees C
36 degrees C
30 degrees C
33 degrees C
30 degrees C
28 degrees C
32 degrees C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
98 degrees F
87 degrees F
102 degrees F
96 degrees F
89 degrees F
93 degrees F
96 degrees F
82 degrees F
100 degrees F
96 degrees F
86 degrees F
91 degrees F
86 degrees F
82 degrees F
89 degrees F
46
38
35
31
39
44
47
56
34
34
29
29
32
42
40
42
33
33
28
28
31
41
39
42
33
33
29
28
31
43
40
42
34
34
29
28
32
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
114 degrees F
100 degrees F
95 degrees F
87 degrees F
102 degrees F
111 degrees F
116 degrees F
132 degrees F
93 degrees F
93 degrees F
84 degrees F
84 degrees F
89 degrees F
107 degrees F
104 degrees F
107 degrees F
91 degrees F
91 degrees F
82 degrees F
82 degrees F
87 degrees F
105 degrees F
102 degrees F
107 degrees F
91 degrees F
91 degrees F
84 degrees F
82 degrees F
87 degrees F
109 degrees F
104 degrees F
107 degrees F
93 degrees F
93 degrees F
84 degrees F
82 degrees F
89 degrees F
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
XM 0 TSen
XM 0 Chip
XF 0 TSen
XF 0 Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
43
42
43
34
34
30
28
32
41
41
44
35
34
30
29
33
44
43
46
39
34
34
29
37
43
47
52
36
42
51
49
50
49
54
49
45
49
46
40
41
40
44
40
38
40
41
34
46
54
45
55
45
44
45
50
45
58
45
52
45
63
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
109 degrees F
107 degrees F
109 degrees F
93 degrees F
93 degrees F
86 degrees F
82 degrees F
89 degrees F
105 degrees F
105 degrees F
111 degrees F
95 degrees F
93 degrees F
86 degrees F
84 degrees F
91 degrees F
111 degrees F
109 degrees F
114 degrees F
102 degrees F
93 degrees F
93 degrees F
84 degrees F
98 degrees F
109 degrees F
116 degrees F
125 degrees F
96 degrees F
107 degrees F
123 degrees F
120 degrees F
122 degrees F
120 degrees F
129 degrees F
120 degrees F
113 degrees F
120 degrees F
114 degrees F
104 degrees F
105 degrees F
104 degrees F
111 degrees F
104 degrees F
100 degrees F
104 degrees F
105 degrees F
93 degrees F
114 degrees F
129 degrees F
113 degrees F
131 degrees F
113 degrees F
111 degrees F
113 degrees F
122 degrees F
113 degrees F
136 degrees F
113 degrees F
125 degrees F
113 degrees F
145 degrees F
281
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
1
1
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
0
0
0
0
1
1
1
1
8
8
8
8
9
9
9
9
PLX Switch TSen
PLX Switch Chip
Intake
Exhaust A
Exhaust B
LU 0 TCAM TSen
LU 0 TCAM Chip
LU 0 TSen
LU 0 Chip
MQ 0 TSen
MQ 0 Chip
LU 1 TCAM TSen
LU 1 TCAM Chip
LU 1 TSen
LU 1 Chip
MQ 1 TSen
MQ 1 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
Intake
Exhaust
ADC-XF1
ADC-XF0
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
45
47
32
44
37
41
49
41
52
41
47
39
42
39
46
39
45
34
41
54
51
52
51
55
51
47
51
47
40
42
40
44
40
38
40
40
35
44
48
59
34
45
53
56
35
41
52
55
33
42
55
56
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
113 degrees F
116 degrees F
89 degrees F
111 degrees F
98 degrees F
105 degrees F
120 degrees F
105 degrees F
125 degrees F
105 degrees F
116 degrees F
102 degrees F
107 degrees F
102 degrees F
114 degrees F
102 degrees F
113 degrees F
93 degrees F
105 degrees F
129 degrees F
123 degrees F
125 degrees F
123 degrees F
131 degrees F
123 degrees F
116 degrees F
123 degrees F
116 degrees F
104 degrees F
107 degrees F
104 degrees F
111 degrees F
104 degrees F
100 degrees F
104 degrees F
104 degrees F
95 degrees F
111 degrees F
118 degrees F
138 degrees F
93 degrees F
113 degrees F
127 degrees F
132 degrees F
95 degrees F
105 degrees F
125 degrees F
131 degrees F
91 degrees F
107 degrees F
131 degrees F
132 degrees F
Measurement
44 degrees C
34 degrees C
46 degrees C
44 degrees C
/
/
/
/
111 degrees F
93 degrees F
114 degrees F
111 degrees F
show chassis environment monitored (MX2020 Router)
user@host > show chassis environment monitored
Class Item
Status
Temp CB 0 IntakeA-Zone0
OK
CB 0 IntakeB-Zone1
OK
CB 0 IntakeC-Zone0
OK
CB 0 ExhaustA-Zone0
OK
282
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CB 0 ExhaustB-Zone1
CB 0 TCBC-Zone0
CB 1 IntakeA-Zone0
CB 1 IntakeB-Zone1
CB 1 IntakeC-Zone0
CB 1 ExhaustA-Zone0
CB 1 ExhaustB-Zone1
CB 1 TCBC-Zone0
SPMB 0 Intake
SPMB 1 Intake
Routing Engine 0 CPU
Routing Engine 1 CPU
SFB 0 Intake-Zone0
SFB 0 Exhaust-Zone1
SFB 0 IntakeA-Zone0
SFB 0 IntakeB-Zone1
SFB 0 Exhaust-Zone0
SFB 0 SFB-XF2-Zone1
SFB 0 SFB-XF1-Zone0
SFB 0 SFB-XF0-Zone0
SFB 1 Intake-Zone0
SFB 1 Exhaust-Zone1
SFB 1 IntakeA-Zone0
SFB 1 IntakeB-Zone1
SFB 1 Exhaust-Zone0
SFB 1 SFB-XF2-Zone1
SFB 1 SFB-XF1-Zone0
SFB 1 SFB-XF0-Zone0
SFB 2 Intake-Zone0
SFB 2 Exhaust-Zone1
SFB 2 IntakeA-Zone0
SFB 2 IntakeB-Zone1
SFB 2 Exhaust-Zone0
SFB 2 SFB-XF2-Zone1
SFB 2 SFB-XF1-Zone0
SFB 2 SFB-XF0-Zone0
SFB 3 Intake-Zone0
SFB 3 Exhaust-Zone1
SFB 3 IntakeA-Zone0
SFB 3 IntakeB-Zone1
SFB 3 Exhaust-Zone0
SFB 3 SFB-XF2-Zone1
SFB 3 SFB-XF1-Zone0
SFB 3 SFB-XF0-Zone0
SFB 4 Intake-Zone0
SFB 4 Exhaust-Zone1
SFB 4 IntakeA-Zone0
SFB 4 IntakeB-Zone1
SFB 4 Exhaust-Zone0
SFB 4 SFB-XF2-Zone1
SFB 4 SFB-XF1-Zone0
SFB 4 SFB-XF0-Zone0
SFB 5 Intake-Zone0
SFB 5 Exhaust-Zone1
SFB 5 IntakeA-Zone0
SFB 5 IntakeB-Zone1
SFB 5 Exhaust-Zone0
SFB 5 SFB-XF2-Zone1
SFB 5 SFB-XF1-Zone0
SFB 5 SFB-XF0-Zone0
SFB 6 Intake-Zone0
Copyright © 2013, Juniper Networks, Inc.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
36
39
46
43
47
45
42
46
33
43
34
42
52
45
47
38
49
59
65
65
53
45
48
39
48
60
64
66
54
46
48
39
50
63
67
67
54
46
50
40
50
64
66
68
55
48
51
42
51
63
66
68
55
49
51
43
51
65
66
71
55
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
96 degrees F
102 degrees F
114 degrees F
109 degrees F
116 degrees F
113 degrees F
107 degrees F
114 degrees F
91 degrees F
109 degrees F
93 degrees F
107 degrees F
125 degrees F
113 degrees F
116 degrees F
100 degrees F
120 degrees F
138 degrees F
149 degrees F
149 degrees F
127 degrees F
113 degrees F
118 degrees F
102 degrees F
118 degrees F
140 degrees F
147 degrees F
150 degrees F
129 degrees F
114 degrees F
118 degrees F
102 degrees F
122 degrees F
145 degrees F
152 degrees F
152 degrees F
129 degrees F
114 degrees F
122 degrees F
104 degrees F
122 degrees F
147 degrees F
150 degrees F
154 degrees F
131 degrees F
118 degrees F
123 degrees F
107 degrees F
123 degrees F
145 degrees F
150 degrees F
154 degrees F
131 degrees F
120 degrees F
123 degrees F
109 degrees F
123 degrees F
149 degrees F
150 degrees F
159 degrees F
131 degrees F
283
PTX Series Packet Transport Switch Software Documentation
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
SFB
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
284
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake-Zone0
Exhaust-Zone1
IntakeA-Zone0
IntakeB-Zone1
Exhaust-Zone0
SFB-XF2-Zone1
SFB-XF1-Zone0
SFB-XF0-Zone0
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
49
51
43
51
64
66
68
55
49
51
43
52
66
67
70
41
48
60
56
59
56
61
56
52
56
52
49
49
49
52
49
45
49
46
39
48
55
52
54
52
56
52
49
52
50
48
48
48
51
48
45
48
45
39
48
58
55
57
55
63
55
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
120
123
109
123
147
150
154
131
120
123
109
125
150
152
158
105
118
140
132
138
132
141
132
125
132
125
120
120
120
125
120
113
120
114
102
118
131
125
129
125
132
125
120
125
122
118
118
118
123
118
113
118
113
102
118
136
131
134
131
145
131
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
51
55
52
48
50
48
52
48
47
48
47
41
48
58
56
59
56
61
56
51
56
53
50
51
50
55
50
47
50
50
41
48
59
56
60
56
64
56
51
56
54
49
53
49
55
49
48
49
49
42
49
61
58
61
58
64
58
56
58
54
51
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
123
131
125
118
122
118
125
118
116
118
116
105
118
136
132
138
132
141
132
123
132
127
122
123
122
131
122
116
122
122
105
118
138
132
140
132
147
132
123
132
129
120
127
120
131
120
118
120
120
107
120
141
136
141
136
147
136
132
136
129
123
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
285
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
286
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
53
51
55
51
50
51
49
42
50
61
58
62
58
64
58
56
58
56
51
58
51
61
51
51
51
51
42
50
61
58
59
58
64
58
54
58
53
51
53
51
54
51
48
51
48
42
50
61
58
63
58
65
58
56
58
56
50
53
50
58
50
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
127
123
131
123
122
123
120
107
122
141
136
143
136
147
136
132
136
132
123
136
123
141
123
123
123
123
107
122
141
136
138
136
147
136
129
136
127
123
127
123
129
123
118
123
118
107
122
141
136
145
136
149
136
132
136
132
122
127
122
136
122
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
8 MQ 2 Chip
8 MQ 3 TSen
8 MQ 3 Chip
9 Intake
9 Exhaust A
9 Exhaust B
9 LU 0 TSen
9 LU 0 Chip
9 LU 1 TSen
9 LU 1 Chip
9 LU 2 TSen
9 LU 2 Chip
9 LU 3 TSen
9 LU 3 Chip
9 MQ 0 TSen
9 MQ 0 Chip
9 MQ 1 TSen
9 MQ 1 Chip
9 MQ 2 TSen
9 MQ 2 Chip
9 MQ 3 TSen
9 MQ 3 Chip
10 Intake
10 Exhaust A
10 Exhaust B
10 LU 0 TSen
10 LU 0 Chip
10 LU 1 TSen
10 LU 1 Chip
10 LU 2 TSen
10 LU 2 Chip
10 LU 3 TSen
10 LU 3 Chip
10 MQ 0 TSen
10 MQ 0 Chip
10 MQ 1 TSen
10 MQ 1 Chip
10 MQ 2 TSen
10 MQ 2 Chip
10 MQ 3 TSen
10 MQ 3 Chip
11 Intake
11 Exhaust A
11 Exhaust B
11 LU 0 TSen
11 LU 0 Chip
11 LU 1 TSen
11 LU 1 Chip
11 LU 2 TSen
11 LU 2 Chip
11 LU 3 TSen
11 LU 3 Chip
11 MQ 0 TSen
11 MQ 0 Chip
11 MQ 1 TSen
11 MQ 1 Chip
11 MQ 2 TSen
11 MQ 2 Chip
11 MQ 3 TSen
11 MQ 3 Chip
12 Intake
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
48
50
49
43
51
61
58
61
58
63
58
55
58
54
52
53
52
54
52
48
52
49
44
48
54
53
54
53
58
53
51
53
51
49
50
49
52
49
48
49
48
39
47
51
50
52
50
55
50
49
50
49
47
47
47
51
47
45
47
49
39
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
118
122
120
109
123
141
136
141
136
145
136
131
136
129
125
127
125
129
125
118
125
120
111
118
129
127
129
127
136
127
123
127
123
120
122
120
125
120
118
120
118
102
116
123
122
125
122
131
122
120
122
120
116
116
116
123
116
113
116
120
102
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
287
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
288
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
47
50
49
51
49
54
49
47
49
49
47
46
47
51
47
45
47
47
40
48
51
50
52
50
54
50
48
50
48
48
47
48
51
48
46
48
47
41
49
50
49
50
49
54
49
48
49
50
48
48
48
52
48
47
48
50
42
51
52
52
55
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
116
122
120
123
120
129
120
116
120
120
116
114
116
123
116
113
116
116
104
118
123
122
125
122
129
122
118
122
118
118
116
118
123
118
114
118
116
105
120
122
120
122
120
129
120
118
120
122
118
118
118
125
118
116
118
122
107
123
125
125
131
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
Copyright © 2013, Juniper Networks, Inc.
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
LU 3 TSen
LU 3 Chip
MQ 0 TSen
MQ 0 Chip
MQ 1 TSen
MQ 1 Chip
MQ 2 TSen
MQ 2 Chip
MQ 3 TSen
MQ 3 Chip
Intake
Exhaust A
Exhaust B
LU 0 TSen
LU 0 Chip
LU 1 TSen
LU 1 Chip
LU 2 TSen
LU 2 Chip
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
52
59
52
50
52
51
51
53
51
60
51
52
51
53
44
51
53
51
52
51
56
51
50
51
50
51
50
51
55
51
49
51
52
45
52
55
54
57
54
61
54
54
54
55
53
53
53
57
53
51
53
54
46
53
57
56
58
56
63
56
54
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
125
138
125
122
125
123
123
127
123
140
123
125
123
127
111
123
127
123
125
123
132
123
122
123
122
123
122
123
131
123
120
123
125
113
125
131
129
134
129
141
129
129
129
131
127
127
127
134
127
123
127
129
114
127
134
132
136
132
145
132
129
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
289
PTX Series Packet Transport Switch Software Documentation
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
FPC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
290
18 LU 3 TSen
18 LU 3 Chip
18 MQ 0 TSen
18 MQ 0 Chip
18 MQ 1 TSen
18 MQ 1 Chip
18 MQ 2 TSen
18 MQ 2 Chip
18 MQ 3 TSen
18 MQ 3 Chip
19 Intake
19 Exhaust A
19 Exhaust B
19 LU 0 TSen
19 LU 0 Chip
19 LU 1 TSen
19 LU 1 Chip
19 LU 2 TSen
19 LU 2 Chip
19 LU 3 TSen
19 LU 3 Chip
19 MQ 0 TSen
19 MQ 0 Chip
19 MQ 1 TSen
19 MQ 1 Chip
19 MQ 2 TSen
19 MQ 2 Chip
19 MQ 3 TSen
19 MQ 3 Chip
0 Intake
0 Exhaust
0 ADC-XF1
0 ADC-XF0
1 Intake
1 Exhaust
1 ADC-XF1
1 ADC-XF0
2 Intake
2 Exhaust
2 ADC-XF1
2 ADC-XF0
3 Intake
3 Exhaust
3 ADC-XF1
3 ADC-XF0
4 Intake
4 Exhaust
4 ADC-XF1
4 ADC-XF0
5 Intake
5 Exhaust
5 ADC-XF1
5 ADC-XF0
6 Intake
6 Exhaust
6 ADC-XF1
6 ADC-XF0
7 Intake
7 Exhaust
7 ADC-XF1
7 ADC-XF0
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
56
56
54
57
54
62
54
53
54
56
49
56
62
62
63
62
69
62
61
62
62
58
62
58
64
58
59
58
60
40
50
58
63
38
48
59
61
36
50
53
59
39
49
61
62
39
49
60
61
38
52
55
65
39
51
58
63
39
52
61
68
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
132 degrees F
132 degrees F
129 degrees F
134 degrees F
129 degrees F
143 degrees F
129 degrees F
127 degrees F
129 degrees F
132 degrees F
120 degrees F
132 degrees F
143 degrees F
143 degrees F
145 degrees F
143 degrees F
156 degrees F
143 degrees F
141 degrees F
143 degrees F
143 degrees F
136 degrees F
143 degrees F
136 degrees F
147 degrees F
136 degrees F
138 degrees F
136 degrees F
140 degrees F
104 degrees F
122 degrees F
136 degrees F
145 degrees F
100 degrees F
118 degrees F
138 degrees F
141 degrees F
96 degrees F
122 degrees F
127 degrees F
138 degrees F
102 degrees F
120 degrees F
141 degrees F
143 degrees F
102 degrees F
120 degrees F
140 degrees F
141 degrees F
100 degrees F
125 degrees F
131 degrees F
149 degrees F
102 degrees F
123 degrees F
136 degrees F
145 degrees F
102 degrees F
125 degrees F
141 degrees F
154 degrees F
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
Copyright © 2013, Juniper Networks, Inc.
8 Intake
8 Exhaust
8 ADC-XF1
8 ADC-XF0
9 Intake
9 Exhaust
9 ADC-XF1
9 ADC-XF0
10 Intake
10 Exhaust
10 ADC-XF1
10 ADC-XF0
11 Intake
11 Exhaust
11 ADC-XF1
11 ADC-XF0
12 Intake
12 Exhaust
12 ADC-XF1
12 ADC-XF0
13 Intake
13 Exhaust
13 ADC-XF1
13 ADC-XF0
14 Intake
14 Exhaust
14 ADC-XF1
14 ADC-XF0
15 Intake
15 Exhaust
15 ADC-XF1
15 ADC-XF0
16 Intake
16 Exhaust
16 ADC-XF1
16 ADC-XF0
17 Intake
17 Exhaust
17 ADC-XF1
17 ADC-XF0
18 Intake
18 Exhaust
18 ADC-XF1
18 ADC-XF0
19 Intake
19 Exhaust
19 ADC-XF1
19 ADC-XF0
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
39
50
64
63
41
50
60
62
46
53
66
65
46
53
63
64
47
53
65
65
48
55
65
67
49
57
68
72
50
56
68
68
51
57
67
68
51
57
69
69
52
58
67
72
50
58
68
71
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
102
122
147
145
105
122
140
143
114
127
150
149
114
127
145
147
116
127
149
149
118
131
149
152
120
134
154
161
122
132
154
154
123
134
152
154
123
134
156
156
125
136
152
161
122
136
154
159
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
291
PTX Series Packet Transport Switch Software Documentation
show chassis environment pdu
Syntax
Release Information
Description
show chassis environment pdu
<slot>
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
(PTX Series Packet Transport Switches only) Display Power Distribution Unit (PDU)
environmental status information.
On the PTX Series Packet Transport Switches, the power supply consists of Power
Distribution Units (PDUs) that contain Power Supply Modules (PSMs). There are four
PSMs for each PDU and each PSM provides power to a specific set of FRUs.
•
PSM 0: Fan Trays
•
PSM 1: Routing Engines, CBs, SIBs, FPD, and CCGs
•
PSM 2: FPCs
•
PSM 3: FPCs
This arrangement of PDUs and PSMs provide a modular power management design.
Depending on which FRUs are present in the chassis, the required number of PSMs change
enabling you to use only as much power as required to power the chassis.
Options
none—Display environmental information about all PDUs.
slot —(Optional) Display environmental information about an individual PDU. For the
PTX5000 Packet Transport Switch, replace slot with 0 or 1.
Required Privilege
Level
List of Sample Output
Output Fields
view
show chassis environment pdu (PTX5000 Packet Transport Switch) on page 293
Table 21 on page 292 lists the output fields for the show chassis environment pdu command.
Output fields are listed in the approximate order in which they appear.
Table 21: show chassis environment pdu Output Fields
Field Name
Field Description
PDU slot status
Number of the PDU slot.
PDU - State
Status of the PDU. Status can be Online, Present, or Absent.
PDU - Hours Used
Number of hours the PDU has been operational.
PDU - Firmware Version
Version level of the firmware running on the PDU.
PSM number status
PSM number. PSMs are numbered 0 through 3.
292
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 21: show chassis environment pdu Output Fields (continued)
Field Name
Field Description
PSM - State
Status of the PSM. Status can be Online, Present, or Absent.
PSM - Temperature
Temperature of the air flowing past the PSM.
PSM - Fans
Status of the cooling fans associated with the PSM.
PSM - AC Input
Status of the AC input for the specified component
PSM - AC Output
Status of the AC output for the specified component.
PSM - DC input
Status of the DC input for the specified component.
PSM - DC output
Status of the DC output for the specified component.
PSM - Hours Used
Number of hours the PSM has been operational.
PSM - Firmware Version
Version level of the firmware running on the PSM.
Sample Output
show chassis environment pdu (PTX5000 Packet Transport Switch)
user@host> show chassis environment pdu 0
PDU 0 status:
State
Online
Hours Used
4281
Firmware Version (MCU1)
00.02
Firmware Version (MCU2)
00.02
Firmware Version (MCU3)
00.02
Firmware Version (MCU4)
00.02
PDU 0 PSM 0 status:
State
Online
Temperature
OK
32 degrees C / 89 degrees F
Fans
OK
DC Input
OK
DC Output
OK
Hours Used
2864
Firmware Version
00.04
PDU 0 PSM 1 status:
State
Online
Temperature
OK
30 degrees C / 86 degrees F
Fans
OK
DC Input
OK
DC Output
OK
Hours Used
3540
Firmware Version
00.04
PDU 0 PSM 2 status:
State
Online
Temperature
OK
29 degrees C / 84 degrees F
Fans
OK
DC Input
OK
DC Output
OK
Copyright © 2013, Juniper Networks, Inc.
293
PTX Series Packet Transport Switch Software Documentation
Hours Used
Firmware Version
PDU 0 PSM 3 status:
State
Temperature
Fans
DC Input
DC Output
Hours Used
Firmware Version
294
3711
00.04
Online
OK
29 degrees C / 84 degrees F
OK
OK
OK
4243
00.04
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis environment routing-engine
Syntax
show chassis environment routing-engine
<slot>
Syntax (TX Matrix
Routers)
show chassis environment routing-engine
<lcc number | scc>
<slot>
Syntax (TX Matrix Plus
Routers)
show chassis environment routing-engine
<lcc number | sfc number>
<slot>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis environment routing-engine
<slot>
Syntax (MX Series
Routers)
show chassis environment routing-engine
<slot>
<all-members>
<local>
<member member-id>
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis environment routing-engine
<slot>
Syntax (QFX Series)
show chassis environment routing-engine
interconnect-device name
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 12.1 for the PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.1 for the T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
Options
Display Routing Engine environmental status information.
none—Display environmental information about all Routing Engines. For a TX Matrix
router, display environmental information about all Routing Engines on the TX Matrix
router and its attached T640 routers. For a TX Matrix Plus router, display
environmental information about all Routing Engines on the TX Matrix Plus router
and its attached T1600 routers.
all-members—(MX Series routers only) (Optional) Display environmental information
about the Routing Engines in all member routers in the Virtual Chassis configuration.
Copyright © 2013, Juniper Networks, Inc.
295
PTX Series Packet Transport Switch Software Documentation
interconnect-device name—(QFabric systems only) (Optional) Display environmental
information about the Routing Engines for the Interconnect device.
lcc number—(TX Matrix and TX Matrix routers only) (Optional) On a TX Matrix router,
display environmental information about the Routing Engine in a specified T640
router (or line-card chassis) that is connected to the TX Matrix router. On a TX Matrix
Plus router, display environmental information about the Routing Engine in a specified
T1600 router (or line-card chassis) that is connected to the TX Matrix Plus router.
Replace number with a value from 0 through 3.
local—(MX Series routers only) (Optional) Display environmental information about the
Routing Engines in the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display environmental
information about the Routing Engines in the specified member in the Virtual Chassis
configuration. Replace member-id with the value of 0 or 1.
scc—(TX Matrix router only) (Optional) Display environmental information about the
Routing Engine in the TX Matrix router (or switch-card chassis).
sfc—(TX Matrix Plus router only) (Optional) Display environmental information about
the Routing Engine in the TX Matrix Plus router (or switch-fabric chassis).
slot—(Optional) Display environmental information about an individual Routing Engine.
On M10i, M20, M40e, M120, M160, M320, MX Series, MX2020 routers, and T Series
routers, replace slot with 0 or 1. On M5, M7i, M10, and M40 routers and on the J Series
router, replace slot with 0. On EX3200 and EX4200 standalone switches, replace
slot with 0. On EX4200 switches in a Virtual Chassis configuration and on EX8208
and EX8216 switches, replace slot with 0 or 1. On the QFX3500 switch, there is only
one Routing Engine, so you do not need to specify the slot number. On PTX Series
Packet Transport Switches, replace slot with 0 or 1
Required Privilege
Level
Related
Documentation
List of Sample Output
296
view
•
request chassis routing-engine master
•
show chassis routing-engine on page 591
show chassis environment routing-engine (Nonredundant) on page 297
show chassis environment routing-engine (Redundant) on page 297
show chassis environment routing-engine (MX2010 Router) on page 297
show chassis environment routing-engine (MX2020 Router) on page 297
show chassis environment routing-engine (TX Matrix Plus Router) on page 298
show chassis environment routing-engine (T4000 Core Router) on page 298
show chassis environment routing-engine (QFX Series) on page 298
show chassis environment routing-engine interconnect-device (QFabric
System) on page 298
show chassis environment routing-engine (PTX5000 Packet Transport
Switch) on page 298
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Output Fields
Table 22 on page 297 lists the output fields for the show chassis environment routing-engine
command. Output fields are listed in the approximate order in which they appear.
Table 22: show chassis environment routing-engine Output Fields
Field Name
Field Description
Routing engine slot status
Number of the Routing Engine slot: 0 or 1.
State
Status of the Routing Engine:
•
Online Master—Routing Engine is online, operating as Master.
•
Online Standby—Routing Engine is online, operating as Standby.
•
Offline—Routing Engine is offline.
Temperature
Temperature of the air flowing past the Routing Engine.
CPU Temperature
(PTX Series and T4000 Core Routers only) Temperature of the air
flowing past the Routing Engine CPU.
Sample Output
show chassis environment routing-engine (Nonredundant)
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
27 degrees C / 80 degrees
show chassis environment routing-engine (Redundant)
user@host> show chassis environment routing-engine
Route Engine 0 status:
State:
Online Master
Temperature:
26 degrees C / 78 degrees F
Route Engine 1 status:
State:
Online Standby
Temperature:
26 degrees C / 78 degrees F
show chassis environment routing-engine (MX2010 Router)
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
37 degrees C / 98
CPU Temperature
37 degrees C / 98
Routing Engine 1 status:
State
Online Standby
Temperature
35 degrees C / 95
CPU Temperature
34 degrees C / 93
degrees F
degrees F
degrees F
degrees F
show chassis environment routing-engine (MX2020 Router)
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
35 degrees C / 95 degrees F
CPU Temperature
34 degrees C / 93 degrees F
Copyright © 2013, Juniper Networks, Inc.
297
PTX Series Packet Transport Switch Software Documentation
Routing Engine 1 status:
State
Temperature
CPU Temperature
Online Standby
44 degrees C / 111 degrees F
43 degrees C / 109 degrees F
show chassis environment routing-engine (TX Matrix Plus Router)
user@host> show chassis environment routing-engine
sfc0-re0:
-------------------------------------------------------------------------Routing Engine 0 status:
State
Online Master
Temperature
26 degrees C / 78 degrees F
Routing Engine 1 status:
State
Online Standby
Temperature
28 degrees C / 82 degrees F
lcc0-re0:
-------------------------------------------------------------------------Routing Engine 0 status:
State
Online Master
Temperature
30 degrees C / 86 degrees F
Routing Engine 1 status:
State
Online Standby
Temperature
29 degrees C / 84 degrees F
show chassis environment routing-engine (T4000 Core Router)
user@host> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
33 degrees C / 91 degrees F
CPU Temperature
50 degrees C / 122 degrees F
Routing Engine 1 status:
State
Online Standby
Temperature
33 degrees C / 91 degrees F
CPU Temperature
46 degrees C / 114 degrees F
show chassis environment routing-engine (QFX Series)
user@switch> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
42 degrees C / 107 degrees F
show chassis environment routing-engine interconnect-device (QFabric System)
user@switch> show chassis environment routing-engine interconnect-device interconnect1
routing-engine interconnect-device interconnect1
Routing Engine 0 status:
State
Online Standby
Temperature
52 degrees C / 125 degrees F
Routing Engine 1 status:
State
Online Master
Temperature
57 degrees C / 134 degrees F
show chassis environment routing-engine (PTX5000 Packet Transport Switch)
user@switch> show chassis environment routing-engine
Routing Engine 0 status:
State
Online Master
Temperature
55 degrees C / 131 degrees F
298
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CPU Temperature
Routing Engine 1 status:
State
Temperature
CPU Temperature
Copyright © 2013, Juniper Networks, Inc.
66 degrees C / 150 degrees F
Online Standby
52 degrees C / 125 degrees F
64 degrees C / 147 degrees F
299
PTX Series Packet Transport Switch Software Documentation
show chassis environment sib
Syntax
show chassis environment sib
<slot>
Syntax (TX Matrix
Router)
show chassis environment sib
<lcc number| scc>
<slot>
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
show chassis environment sib
<lcc number| sfc number>
<slot>
<f13 sib-slot>
<f2s sib-slot/sib-f2s-slot-number>
Command introduced before Junos OS Release 7.4.
sfc option introduced in Junos OS Release 9.6. for the TX Matrix Plus router.
Command introduced in Junos OS 12.1 for the PTX Series Packet Transport Switches.
Command introduced in Junos OS 12.1 for the T4000 Core Routers.
(M320, T Series, TX Matrix, and TX Matrix Plus routers, and PTX Packet Transport
Switches only) Display Switch Interface Boards (SIB) environmental information.
none—Display environmental information about all SIBs. On a TX Matrix router, display
environmental information about all SIBs on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router, display environmental information about
all SIBs on the TX Matrix Plus router and its attached T1600 routers.
f13 sib-slot—(TX Matrix Plus routers only) (Optional) Display SIB F13 environmental
information only. Replace sib-slot with one of the following values: 0, 1, 3, 4, 6, 7, 8,
9, 11, or 12. (Slots 2, 5, 10, 13, 14, and 15 are unused).
f2s sib-slot/sib-f2s-slot-number—(TX Matrix Plus routers only) (Optional) Display SIB
F2s environmental information only. Replace sib-slot with a value from 0 through 4,
followed by a sib-f2s-slot-number value of 0, 2, 4 or 6.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display environmental information about the SIB in a specified T640 router (or
line-card chassis) that is connected to the TX Matrix router. On a TX Matrix Plus
router, display environmental information about the SIB in a specified T1600 router
(or line-card chassis) that is connected to the TX Matrix Plus router. Replace number
with a value from 0 through 4.
scc—(TX Matrix routers only) (Optional) Display environmental information about the
SIB in the TX Matrix router (or switch-card chassis).
sfc—(TX Matrix Plus routers only) (Optional) Display environmental information about
the SIB in the TX Matrix Plus router (or switch-fabric chassis).
slot—(Optional) Display environmental information about the specified SIB. For the M320
router, replace slot with a value from 0 through 3. For the T640, T1600, T4000, and
300
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX Matrix routers, replace slot with a value from 0 through 4. For the TX Matrix Plus
router, see f13 sib-slot and f2s sib-slot/sib-f2s-slot-number. For the T320 router,
replace slot with a value from 0 through 2. For the PTX5000 Packet Transport Switch,
replace slot with a value from 0 through 8.
Required Privilege
Level
view
Related
Documentation
List of Sample Output
•
request chassis sib
•
show chassis sibs on page 611
•
Configuring the Junos OS to Upgrade and Downgrade Switch Interface Boards on a TX
Matrix Router
•
M320 SIB Description
show chassis environment sib (M320 Router) on page 302
show chassis environment sib 1 (T640 Router) on page 303
show chassis environment sib 1 (T4000 Router) on page 303
show chassis environment sib scc (TX Matrix Router) on page 304
show chassis environment sib (TX Matrix Plus Router) on page 304
show chassis environment sib sfc (TX Matrix Plus Router) on page 314
show chassis environment sib f13 (TX Matrix Plus Router) on page 320
show chassis environment sib f2s (TX Matrix Plus Router) on page 320
show chassis environment sib (PTX5000 Packet Transport Switch) on page 320
Output Fields
Table 23 on page 301 lists the output fields for the show chassis environment sib command.
Output fields are listed in the approximate order in which they appear.
Table 23: show chassis environment sib Output Fields
Field Name
Field Description
SIB slot status
SIB slot number:
•
0 through 3 on an M320 router.
•
0 or 2 on a T320 router.
•
0 through 4 on a T640, T1600, T4000, or TX Matrix router.
•
0, 1, 3, 4, 6, 7, 8, 9, 11, or 12 for F13 SIBs on a TX Matrix Plus router. (Slots 2, 5, 10, 13, 14, and 15 are
unused).
•
0 through 4, followed by 0, 2, 4, or 6 for F2S SIBs on a TX Matrix Plus router. For example, SIB F2S
0/4.
•
0 through 8 on a PTX5000 Packet Transport Switch.
Copyright © 2013, Juniper Networks, Inc.
301
PTX Series Packet Transport Switch Software Documentation
Table 23: show chassis environment sib Output Fields (continued)
Field Name
Field Description
State
Status of the SIB:
•
Online—SIB is online and running.
•
Offline—SIB is powered down.
•
Spare (T640, T1600, T4000, and TX Matrix routers only)—SIB is redundant and will move to active
state if one of the working SIBs fails.
Only four of the SIBs are active at any time. The fifth one is marked Spare. It is activated if there is a
fault on one of the active SIBs.
Online standby (TX Matrix Plus router only).
Temperature
Temperature of the air flowing past the SIB.
On PTX Series Packet Transport Switches, separate temperatures are displayed for Intake, Exhaust,
and Junction.
Power
Information about the voltage supplied to the SIB. The left column displays the required power, in
volts. The right column displays the measured power, in millivolts.
Sample Output
show chassis environment sib (M320 Router)
user@host> show chassis environment sib
SIB 0 status:
State
Online
Temperature
34 degrees C / 93 degrees F
Power:
GROUND
0 mV
1.8 V
1805 mV
2.5 V
2498 mV
3.3 V
3306 mV
1.8 V bias
1789 mV
3.3 V bias
3299 mV
5.0 V bias
5003 mV
8.0 V bias
7374 mV
SIB 1 status:
State
Online
Temperature
35 degrees C / 95 degrees F
Power:
GROUND
0 mV
1.8 V
1814 mV
2.5 V
2477 mV
3.3 V
3319 mV
1.8 V bias
1792 mV
3.3 V bias
3291 mV
5.0 V bias
4981 mV
8.0 V bias
7335 mV
SIB 2 status:
State
Online
Temperature
33 degrees C / 91 degrees F
Power:
GROUND
0 mV
1.8 V
1811 mV
302
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
2.5 V
3.3 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
SIB 3 status:
State
Temperature
Power:
GROUND
1.8 V
2.5 V
3.3 V
1.8 V bias
3.3 V bias
5.0 V bias
8.0 V bias
2489
3330
1797
3304
5025
7330
mV
mV
mV
mV
mV
mV
Online
37 degrees C / 98 degrees F
0
1798
2481
3328
1792
3313
5013
7467
mV
mV
mV
mV
mV
mV
mV
mV
show chassis environment sib 1 (T640 Router)
user@host> show chassis environment sib 1
SIB 1 status:
State
Online
Temperature
39 degrees C / 102 degrees F
Power:
GROUND
0 mV
1.8 V
1809 mV
2.5 V
2478 mV
3.3 V
3308 mV
1.8 V bias
1794 mV
3.3 V bias
3274 mV
5.0 V bias
4996 mV
8.0 V bias
7247 mV
show chassis environment sib 1 (T4000 Router)
user@host> show chassis environment sib 1
SIB 1 status:
State
Online
Temperature
42 degrees C / 107 degrees F
Power
8.0 V bias
8100 mV
3.3 V bias
3284 mV
0.9 V bias
904 mV
1.1 V bias
1090 mV
1.5 V bias
1488 mV
2.5 V bias
2504 mV
9.0 V
8940 mV
3.3 V
3288 mV
XF0 1.0 V
998 mV
XF0 1.0 V LDO
994 mV
PCIe SW 1.0 V
990 mV
XF0 1.8 V
1788 mV
XF1 1.0 V
1002 mV
XF2 1.0 V
1002 mV
XF3 1.0 V
998 mV
1.2 V
1194 mV
XF1 1.0 V LDO
1000 mV
XF2 1.0 V LDO
998 mV
XF3 1.0 V LDO
998 mV
Copyright © 2013, Juniper Networks, Inc.
303
PTX Series Packet Transport Switch Software Documentation
XF1 1.8 V
XF2 1.8 V
XF3 1.8 V
1.5 V
SW 3.3 V
1798
1800
1794
1488
3320
mV
mV
mV
mV
mV
show chassis environment sib scc (TX Matrix Router)
user@host> show chassis environment sib scc
scc-re0:
-------------------------------------------------------------------------SIB 3 status:
State
Offline
Reason
Offlined by button press
Temperature
0 degrees C / 32 degrees F
Power:
GROUND
0 mV
1.8 V
0 mV
2.5 V
0 mV
3.3 V
0 mV
1.8 V bias
0 mV
3.3 V bias
0 mV
5.0 V bias
0 mV
8.0 V bias
0 mV
SIB 4 status:
State
Online
Temperature
42 degrees C / 107 degrees F
Temperature (B)
41 degrees C / 105 degrees F
Power:
GROUND
0 mV
1.8 V
1787 mV
2.5 V
2488 mV
3.3 V
3294 mV
1.8 V bias
1787 mV
3.3 V bias
3306 mV
5.0 V bias
5010 mV
8.0 V bias
7418 mV
Power (B):
GROUND
0 mV
1.8 V
1785 mV
2.5 V
2485 mV
3.3 V
3289 mV
1.8 V bias
1799 mV
3.3 V bias
3284 mV
5.0 V bias
4979 mV
8.0 V bias
7882 mV
show chassis environment sib (TX Matrix Plus Router)
user@host> show chassis environment sib
sfc0-re0:
-------------------------------------------------------------------------SIB F13 0 status:
State
Online - Standby
Temperature
54 degrees C / 129 degrees F
Temperature (B)
50 degrees C / 122 degrees F
Power
1.2 V_0
1205 mV
1.2 V_1
1202 mV
1.2 V_2
1205 mV
1.2 V_3
1208 mV
304
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 1 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 3 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 4 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
Copyright © 2013, Juniper Networks, Inc.
1501
1508
1798
2510
3312
8991
0
mV
mV
mV
mV
mV
mV
mV
2510 mV
3318 mV
9024 mV
Online - Standby
45 degrees C / 113 degrees F
42 degrees C / 107 degrees F
1202
1198
1202
1202
1498
1501
1811
2504
3292
8991
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2507 mV
3306 mV
8970 mV
Online
48 degrees C / 118 degrees F
44 degrees C / 111 degrees F
1205
1202
1202
1202
1508
1504
1798
2520
3300
9009
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2504 mV
3312 mV
9006 mV
Online
44 degrees C / 111 degrees F
40 degrees C / 104 degrees F
1205
1205
1202
1205
1508
mV
mV
mV
mV
mV
305
PTX Series Packet Transport Switch Software Documentation
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 6 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 7 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 8 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
306
1508
1811
2510
3312
8970
0
mV
mV
mV
mV
mV
mV
2513 mV
3318 mV
9048 mV
Online
50 degrees C / 122 degrees F
46 degrees C / 114 degrees F
1195
1205
1202
1202
1495
1495
1801
2494
3300
8991
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2500 mV
3300 mV
9006 mV
Online
52 degrees C / 125 degrees F
49 degrees C / 120 degrees F
1202
1202
1198
1185
1501
1492
1795
2491
3286
8892
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2507 mV
3306 mV
8952 mV
Online
55 degrees C / 131 degrees F
50 degrees C / 122 degrees F
1208
1205
1205
1211
1514
1508
mV
mV
mV
mV
mV
mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 9 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 11 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 12 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
Copyright © 2013, Juniper Networks, Inc.
1807
2516
3324
9027
0
mV
mV
mV
mV
mV
2520 mV
3318 mV
9066 mV
Online
46 degrees C / 114 degrees F
41 degrees C / 105 degrees F
1208
1202
1208
1202
1504
1504
1817
2516
3312
9009
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2510 mV
3312 mV
9024 mV
Online
47 degrees C / 116 degrees F
42 degrees C / 107 degrees F
1202
1205
1202
1202
1501
1501
1801
2510
3312
8979
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2252 mV
5014 mV
9954 mV
Online
45 degrees C / 113 degrees F
40 degrees C / 104 degrees F
1211
1208
1205
1205
1511
1501
1817
mV
mV
mV
mV
mV
mV
mV
307
PTX Series Packet Transport Switch Software Documentation
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F2S 0/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
308
2504
3318
9027
0
mV
mV
mV
mV
2520 mV
3338 mV
9006 mV
Online - Standby
40 degrees C / 104 degrees F
0
1198
1198
1202
1498
1814
3300
3300
3286
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
40 degrees C / 104 degrees F
0
1198
1195
1202
1498
1807
3300
3300
3286
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
40 degrees C / 104 degrees F
0
1202
1198
1202
1504
1817
3300
3300
3306
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
39 degrees C / 102 degrees F
0
1202
1198
1202
1495
1814
3300
mV
mV
mV
mV
mV
mV
mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 2/0 status:
State
Copyright © 2013, Juniper Networks, Inc.
3300 mV
3280 mV
8250 mV
Online
39 degrees C / 102 degrees F
0
1195
1192
1195
1488
1798
3300
3300
3280
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1205
1202
1205
1501
1820
3300
3300
3306
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1198
1195
1195
1498
1811
3300
3300
3300
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1195
1195
1198
1498
1807
3306
3300
3292
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
309
PTX Series Packet Transport Switch Software Documentation
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 2/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 2/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 2/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 3/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
310
39 degrees C / 102 degrees F
0
1195
1195
1198
1498
1804
3300
3300
3286
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
38 degrees C / 100 degrees F
0
1195
1195
1198
1495
1807
3300
3300
3300
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
38 degrees C / 100 degrees F
0
1198
1195
1198
1501
1804
3286
3292
3300
8230
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
38 degrees C / 100 degrees F
0
1202
1198
1202
1501
1817
3300
3300
3318
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
38 degrees C / 100 degrees F
0 mV
1195 mV
1195 mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 3/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 3/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 3/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 4/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
Copyright © 2013, Juniper Networks, Inc.
1198
1501
1814
3300
3300
3274
8250
mV
mV
mV
mV
mV
mV
mV
Online
37 degrees C / 98 degrees F
0
1202
1195
1195
1495
1804
3300
3300
3286
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
37 degrees C / 98 degrees F
0
1205
1198
1202
1501
1811
3300
3300
3318
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
37 degrees C / 98 degrees F
0
1205
1202
1202
1511
1820
3306
3306
3318
8265
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
36 degrees C / 96 degrees F
0
1198
1198
1198
1501
1814
3292
3292
mV
mV
mV
mV
mV
mV
mV
mV
311
PTX Series Packet Transport Switch Software Documentation
3.3 V ASF
9.0 V
SIB F2S 4/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 4/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 4/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
3312 mV
8230 mV
Online
37 degrees C / 98 degrees F
0
1198
1192
1195
1495
1807
3300
3300
3300
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
36 degrees C / 96 degrees F
0 mV
1202 mV
1195 mV
1202 mV
1501 mV
1814 mV
3300 mV
3300 mV
3312 mV
8250 mV
Online
36 degrees C / 96 degrees F
0
1198
1195
1198
1498
1820
3292
3292
3286
8230
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
lcc0-re0:
-------------------------------------------------------------------------SIB 0 status:
State
Online - Standby
Temperature
49 degrees C / 120 degrees F
Temperature (B)
42 degrees C / 107 degrees F
Power
1.2 V
1204 mV
1.5 V
1484 mV
2.5 V
2500 mV
3.3 V
3312 mV
3.3 V bias
3312 mV
5.0 V bias
4956 mV
8.0 V bias
7740 mV
9.0 V
8880 mV
Power (B)
312
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.2 V
2.5 V
3.3 V
9.0 V
SIB 1 status:
State
Temperature
Temperature (B)
Power
1.2 V
1.5 V
2.5 V
3.3 V
3.3 V bias
5.0 V bias
8.0 V bias
9.0 V
Power (B)
1.2 V
2.5 V
3.3 V
9.0 V
SIB 2 status:
State
Temperature
Temperature (B)
Power
1.2 V
1.5 V
2.5 V
3.3 V
3.3 V bias
5.0 V bias
8.0 V bias
9.0 V
Power (B)
1.2 V
2.5 V
3.3 V
9.0 V
SIB 3 status:
State
Temperature
Temperature (B)
Power
1.2 V
1.5 V
2.5 V
3.3 V
3.3 V bias
5.0 V bias
8.0 V bias
9.0 V
Power (B)
1.2 V
2.5 V
3.3 V
9.0 V
SIB 4 status:
State
Temperature
Copyright © 2013, Juniper Networks, Inc.
1206
2500
3316
8988
mV
mV
mV
mV
Online
49 degrees C / 120 degrees F
42 degrees C / 107 degrees F
1202
1482
2500
3296
3288
4986
7800
8868
mV
mV
mV
mV
mV
mV
mV
mV
1206
2512
3312
8952
mV
mV
mV
mV
Online
49 degrees C / 120 degrees F
42 degrees C / 107 degrees F
1202 mV
1480 mV
2476 mV
3292 mV
3308 mV
5010 mV
7800 mV
8880 mV
1204
2516
3308
8988
mV
mV
mV
mV
Online
48 degrees C / 118 degrees F
42 degrees C / 107 degrees F
1204
1480
2500
3292
3292
4986
7812
8892
mV
mV
mV
mV
mV
mV
mV
mV
1198
2512
3308
8892
mV
mV
mV
mV
Online
48 degrees C / 118 degrees F
313
PTX Series Packet Transport Switch Software Documentation
Temperature (B)
42 degrees C / 107 degrees F
Power
1.2 V
1206 mV
1.5 V
1482 mV
2.5 V
2484 mV
3.3 V
3324 mV
3.3 V bias
3340 mV
5.0 V bias
4980 mV
8.0 V bias
7764 mV
9.0 V
8784 mV
Power (B)
1.2 V
1202 mV
2.5 V
2504 mV
3.3 V
3308 mV
9.0 V
8820 mV
lcc1-re0:
-------------------------------------------------------------------------SIB 0 status:
State
Online - Standby
Temperature
49 degrees C / 120 degrees F
Temperature (B)
43 degrees C / 109 degrees F
Power
1.2 V
1206 mV
1.5 V
1506 mV
2.5 V
2496 mV
3.3 V
3308 mV
3.3 V bias
3296 mV
5.0 V bias
4974 mV
8.0 V bias
7884 mV
9.0 V
8820 mV
Power (B)
1.2 V
1200 mV
2.5 V
2508 mV
3.3 V
3292 mV
9.0 V
8892 mV
...
show chassis environment sib sfc (TX Matrix Plus Router)
user@host> show chassis environment sib sfc
sfc0-re0:
-------------------------------------------------------------------------SIB F13 0 status:
State
Online - Standby
Temperature
54 degrees C / 129 degrees F
Temperature (B)
50 degrees C / 122 degrees F
Power
1.2 V_0
1205 mV
1.2 V_1
1205 mV
1.2 V_2
1208 mV
1.2 V_3
1208 mV
1.5 V_0
1501 mV
1.5 V_1
1508 mV
1.8 V
1804 mV
2.5 V
2504 mV
3.3 V
3312 mV
9.0 V
8991 mV
9.0 V bias
0 mV
Power (B)
2.5 V
2516 mV
3.3 V
3318 mV
314
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
9.0 V
SIB F13 1 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 3 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 4 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
Copyright © 2013, Juniper Networks, Inc.
9048 mV
Online - Standby
45 degrees C / 113 degrees F
42 degrees C / 107 degrees F
1202
1205
1198
1205
1498
1495
1801
2507
3306
8970
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2507 mV
3306 mV
8970 mV
Online
48 degrees C / 118 degrees F
43 degrees C / 109 degrees F
1208
1195
1202
1198
1504
1504
1801
2510
3312
8970
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2500 mV
3332 mV
8970 mV
Online
44 degrees C / 111 degrees F
40 degrees C / 104 degrees F
1205
1202
1205
1202
1508
1511
1811
2510
3312
8952
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2510 mV
3306 mV
9024 mV
315
PTX Series Packet Transport Switch Software Documentation
SIB F13 6 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 7 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 8 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 9 status:
316
Online
49 degrees C / 120 degrees F
46 degrees C / 114 degrees F
1195
1198
1202
1202
1501
1495
1801
2507
3306
8979
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2497 mV
3318 mV
9006 mV
Online
52 degrees C / 125 degrees F
48 degrees C / 118 degrees F
1198
1198
1202
1189
1498
1498
1804
2491
3292
8904
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2500 mV
3306 mV
8952 mV
Online
54 degrees C / 129 degrees F
49 degrees C / 120 degrees F
1211
1208
1208
1211
1508
1511
1801
2513
3324
9048
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2516 mV
3318 mV
9102 mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 11 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F13 12 status:
State
Temperature
Temperature (B)
Power
1.2 V_0
1.2 V_1
1.2 V_2
1.2 V_3
1.5 V_0
1.5 V_1
1.8 V
2.5 V
3.3 V
9.0 V
9.0 V bias
Power (B)
2.5 V
3.3 V
9.0 V
SIB F2S 0/0 status:
State
Copyright © 2013, Juniper Networks, Inc.
Online
46 degrees C / 114 degrees F
41 degrees C / 105 degrees F
1205
1202
1205
1198
1504
1504
1817
2507
3306
8991
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2510 mV
3332 mV
9006 mV
Online
47 degrees C / 116 degrees F
42 degrees C / 107 degrees F
1202
1205
1202
1198
1501
1504
1807
2510
3306
8991
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2249 mV
4994 mV
9936 mV
Online
44 degrees C / 111 degrees F
40 degrees C / 104 degrees F
1208
1202
1208
1205
1511
1508
1814
2507
3318
9039
0
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
2516 mV
3344 mV
9006 mV
Online - Standby
317
PTX Series Packet Transport Switch Software Documentation
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 0/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
318
40 degrees C / 104 degrees F
0
1198
1198
1202
1498
1814
3300
3300
3286
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
40 degrees C / 104 degrees F
0
1198
1195
1202
1498
1807
3300
3300
3292
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
40 degrees C / 104 degrees F
0
1198
1195
1202
1501
1817
3300
3300
3306
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online - Standby
39 degrees C / 102 degrees F
0
1202
1198
1198
1495
1814
3300
3300
3280
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0 mV
1195 mV
1192 mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/2 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/4 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 1/6 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
3.3 V ASF
9.0 V
SIB F2S 2/0 status:
State
Temperature
Power
1.2 V_1
1.2 V_ASF
1.2 V_ASF_B
1.2 V_ASF_D
1.5 V
1.8 V
3.3 V
3.3 V bias
Copyright © 2013, Juniper Networks, Inc.
1195
1492
1798
3300
3300
3280
8250
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1205
1202
1205
1504
1820
3300
3300
3306
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1202
1195
1198
1498
1811
3300
3300
3300
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
39 degrees C / 102 degrees F
0
1195
1192
1198
1498
1807
3306
3300
3292
8250
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
Online
38 degrees C / 100 degrees F
0
1195
1195
1198
1498
1804
3300
3300
mV
mV
mV
mV
mV
mV
mV
mV
319
PTX Series Packet Transport Switch Software Documentation
3.3 V ASF
9.0 V
3292 mV
8250 mV
...
show chassis environment sib f13 (TX Matrix Plus Router)
user@host> show chassis environment sib f13 0
SIB F13 0 status:
State
Online - Standby
Temperature
54 degrees C / 129 degrees F
Temperature (B)
50 degrees C / 122 degrees F
Power
1.2 V_0
1202 mV
1.2 V_1
1202 mV
1.2 V_2
1208 mV
1.2 V_3
1208 mV
1.5 V_0
1501 mV
1.5 V_1
1504 mV
1.8 V
1801 mV
2.5 V
2504 mV
3.3 V
3318 mV
9.0 V
8991 mV
9.0 V bias
0 mV
Power (B)
2.5 V
2510 mV
3.3 V
3318 mV
9.0 V
9024 mV
show chassis environment sib f2s (TX Matrix Plus Router)
user@host> show chassis environment sib f2s 0/2
SIB F2S 0/2 status:
State
Online - Standby
Temperature
40 degrees C / 104 degrees F
Power
1.2 V_1
0 mV
1.2 V_ASF
1198 mV
1.2 V_ASF_B
1195 mV
1.2 V_ASF_D
1202 mV
1.5 V
1501 mV
1.8 V
1807 mV
3.3 V
3300 mV
3.3 V bias
3300 mV
3.3 V ASF
3286 mV
9.0 V
8250 mV
show chassis environment sib (PTX5000 Packet Transport Switch)
user@host> show chassis environment sib
SIB 0 status:
State
Online
Intake Temperature
39 degrees C / 102 degrees F
Exhaust Temperature
37 degrees C / 98 degrees F
Junction Temperature
43 degrees C / 109 degrees F
Power
1.0 V
1000 mV
1.5 V
1499 mV
1.2 V
1199 mV
3.3 V
3300 mV
0.9 V
900 mV
2.5 V
2500 mV
3.3 V bias
3298 mV
320
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SIB 1 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 2 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 3 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 4 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 5 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
Copyright © 2013, Juniper Networks, Inc.
Online
39 degrees C / 102 degrees F
36 degrees C / 96 degrees F
45 degrees C / 113 degrees F
1000
1500
1200
3300
900
2499
3321
mV
mV
mV
mV
mV
mV
mV
Online
37 degrees C / 98 degrees F
37 degrees C / 98 degrees F
41 degrees C / 105 degrees F
999
1499
1199
3299
900
2500
3339
mV
mV
mV
mV
mV
mV
mV
Online
40 degrees C / 104 degrees F
40 degrees C / 104 degrees F
45 degrees C / 113 degrees F
1000
1500
1199
3299
900
2500
3328
mV
mV
mV
mV
mV
mV
mV
Online
47 degrees C / 116 degrees F
45 degrees C / 113 degrees F
57 degrees C / 134 degrees F
1000
1500
1199
3299
900
2499
3333
mV
mV
mV
mV
mV
mV
mV
Online
57 degrees C / 134 degrees F
43 degrees C / 109 degrees F
71 degrees C / 159 degrees F
1000 mV
1499 mV
1199 mV
321
PTX Series Packet Transport Switch Software Documentation
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 6 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 7 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
SIB 8 status:
State
Intake Temperature
Exhaust Temperature
Junction Temperature
Power
1.0 V
1.5 V
1.2 V
3.3 V
0.9 V
2.5 V
3.3 V bias
322
3300
900
2500
3307
mV
mV
mV
mV
Online
57 degrees C / 134 degrees F
42 degrees C / 107 degrees F
66 degrees C / 150 degrees F
1000
1499
1200
3300
899
2500
3311
mV
mV
mV
mV
mV
mV
mV
Online
58 degrees C / 136 degrees F
42 degrees C / 107 degrees F
67 degrees C / 152 degrees F
999
1500
1199
3299
900
2499
3307
mV
mV
mV
mV
mV
mV
mV
Online
57 degrees C / 134 degrees F
43 degrees C / 109 degrees F
71 degrees C / 159 degrees F
1000
1500
1199
3299
900
2500
3332
mV
mV
mV
mV
mV
mV
mV
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis ethernet-switch
Syntax
Syntax (EX8200
Switch)
show chassis ethernet-switch
<errors <port>>
show chassis ethernet-switch
<statistics <port> | switch <number>
Syntax (T4000
Router)
show chassis ethernet-switch
<errors <port> | statistics <port>>
Syntax (TX Matrix
Router)
show chassis ethernet-switch
<errors <port> | statistics <port>>
<lcc <number> | scc>
Syntax (TX Matrix Plus
Router)
Syntax (MX Series
Router)
Syntax (MX2010 and
MX2020 3D Universal
Edge Routers)
Syntax (PTX Series
Packet Transport
Switches)
Release Information
show chassis ethernet-switch
<errors <port> | switch <number>
<lcc number | sfc number>
<statistics <port> | switch <number>
show chassis ethernet-switch
<all-members>
<errors <port>>
<local>
<member member-id>
show chassis ethernet-switch
<errors <port> | statistics <port>>
show chassis ethernet-switch
<errors <port>>
<statistics <port>>
<port-state <port>>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M10i, M40e, M120, M160, M320, MX Series, and T Series routers and EX8200 and PTX
Series switches only) Display information about the ports on the Control Board (CB)
Ethernet switch.
Options
none—Display information about each connected port on the Ethernet switch. On a TX
Matrix router, display information about each connected port on the Ethernet switch
on the TX Matrix router and its attached T640 routers. On a TX Matrix Plus router,
display information about each connected port on the Ethernet switch on the TX
Matrix Plus router and its attached T1600 routers.
Copyright © 2013, Juniper Networks, Inc.
323
PTX Series Packet Transport Switch Software Documentation
all-members—(MX Series routers only) (Optional) Display information about the ports
on the CB Ethernet switch on all the members of the Virtual Chassis configuration.
errors—(Optional) Display the numbers and types of errors accumulated on all ports of
the Ethernet switch.
errors port—(Optional) Display the numbers and types of errors accumulated on the
specified port (0 through 15) of the Ethernet switch. On the TX Matrix router, replace
port with a value from 0 through 15. On the TX Matrix Plus router and EX8200 switch,
replace port with a value from 0 through 27. On the PTX Series Packet Transport
Switches, replace port with a value from 0 through 25. On the T4000 routers, MX2020
routers, and MX2010 routers, replace port with a value from 0 through 27.
errors switch number—(TX Matrix Plus router only) (Optional) Display the numbers and
types of errors accumulated on the specified switch. Replace number with a value
from 0 through 2.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display information about the ports on the CB's Ethernet switch on a specified T640
router (or line-card chassis) that is connected to a TX Matrix router. On a TX Matrix
Plus router, display information about the ports on the CB's Ethernet switch on a
specified T1600 router (or line-card chassis) that is connected to a TX Matrix Plus
router. Replace number with a value from 0 through 3.
local—(MX Series routers only) (Optional) Display information about the ports on the
CB Ethernet switch on the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display information about the
ports on the CB Ethernet switch on the specified member of the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
port-state—(PTX Series only) (Optional) Display information about current port operation
(Blocking, Listening, or Disabled).
scc—(TX Matrix router only) (Optional) Display information about the ports on the CB's
Ethernet switch on the TX Matrix router (or switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display information about the ports
on the CB’s Ethernet switch on the TX Matrix Plus router (or switch-fabric chassis).
Replace number with 0.
statistics—(Optional) Display traffic statistics for each connected port on the Ethernet
switch.
statistics port—(Optional) Display traffic statistics for the specified port on the Ethernet
switch. On the TX Matrix router, replace port with a value from 0 through 25. On the
TX Matrix Plus router or EX8200 switch, replace port with a value from 0 through
27. On the PTX Series Packet Transport Switches, replace port with a value from 0
through 25. On the T4000 routers, MX2020 routers, and MX2010 routers, replace
port with a value from 0 through 27.
324
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
statistics switch number—(TX Matrix Plus routers and EX8200 switch only) (Optional)
Display traffic statistics for the specified Ethernet switch number. On the TX Matrix
Plus router and EX8216 switch, replace number with a value from 0 through 2. On
the EX8208 switch, replace number with a value from 0 through 1.
Required Privilege
Level
List of Sample Output
Output Fields
view
show chassis ethernet-switch on page 329
show chassis ethernet-switch (MX480 Router with MPC4E) on page 330
show chassis ethernet-switch (MX2010 Router) on page 331
show chassis ethernet-switch statistics (MX2010 Router) on page 333
show chassis ethernet-switch (MX2020 Router) on page 339
show chassis ethernet-switch statistics (MX2020 Router) on page 342
show chassis ethernet-switch (MX2020 Router with MPC4E) on page 350
show chassis ethernet-switch (TX Matrix Router) on page 351
show chassis ethernet-switch errors on page 352
show chassis ethernet-switch statistics on page 353
show chassis ethernet-switch errors (TX Matrix Plus Router) on page 354
show chassis ethernet-switch sfc errors (TX Matrix Plus Router) on page 355
show chassis ethernet-switch statistics (TX Matrix Plus Router) on page 356
show chassis ethernet-switch (T4000 Router) on page 360
show chassis ethernet-switch errors (T4000 Router) on page 361
show chassis ethernet-switch (PTX5000 Packet Transport Switch) on page 362
show chassis ethernet-switch statistics (PTX5000 Packet Transport
Switch) on page 363
show chassis ethernet-switch port-state (PTX5000 Packet Transport
Switch) on page 366
Table 24 on page 326 lists the output fields for the show chassis ethernet-switch command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
325
PTX Series Packet Transport Switch Software Documentation
Table 24: show chassis ethernet-switch Output Fields
Field Name
Field Description
Link is good on port n
connected to device
Information about the link between each port on the CB's Ethernet switch and one of the following
devices:
or
•
FPC0 (Flexible PIC Concentrator 0) through FPC7
•
Local controller
•
Routing Engine
•
Other Routing Engine (on a system with two Routing Engines)
•
SPMB (Switch Processor Mezzanine Board)
•
(TX Matrix router only) LCCO (line-card chassis 0) through LCC3
Link is good on Fast
Ethernet port n
connected to device
or
Link is good on Gigabit
Ethernet port n
connected to device
or
Link is down on Gigabit
Ethernet port connected
to device
Speed is
Speed at which the Ethernet link is running: 10 Mb or 100 Mb. When the device is RE or Other RE on the
TX Matrix router, the speed is 1000 Mb.
NOTE: Irrespective of the device, the speed is 1000 Mb on the MX2010 and MX2020 routers.
Duplex is
Duplex type of the Ethernet link: full or half.
Autonegotiate is
Enabled (or Disabled)
By default, built-in Fast Ethernet ports on a PIC autonegotiate whether to operate at 10 Mbps or 100
Mbps. All other interfaces automatically choose the correct speed based on the PIC type and whether
the PIC is configured to operate in multiplexed mode (using the no-concatenate statement at the
[edit chassis] hierarchy level, as described in the Junos OS System Basics Configuration Guide).
Flow Control TX is
Enabled (or Disabled)
(MX2010 routers, MX2020 routers, and PTX Series) Flow control in the transmit direction is enabled
(or disabled). Flow control regulates the flow of packets from the switch to the remote side of the
connection.
Flow Control RX is
Enabled (or Disabled)
(MX2010 routers, MX2020 routers, and PTX Series) Flow control in the receive direction is enabled
(or disabled). Flow control regulates the flow of packets from the remote side of the connection to
the switch.
MLT3
Number of multilevel threshold-3 (MLT-3) Fast Ethernet errors detected.
Accumulated error counts for port n connected to device FPCn: (error output only)
Lock
Number of lock errors detected.
Xmit
Number of transmission errors detected.
ESD
Number of electrostatic discharge (ESD) errors detected.
False Carrier
Number of false carrier errors detected.
326
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 24: show chassis ethernet-switch Output Fields (continued)
Field Name
Field Description
Disconnects
Number of disconnect errors detected.
FX mode
Number of errors detected on an Ethernet link over optical fiber.
Statistics for port n connected to device FPCn (statistics output only)
TX Packets 64 Octets
(MX2010 and MX2020 routers) Number of packets of size 64 octets transmitted.
TX Packets 65 - 127
Octets
(MX2010 and MX2020 routers) Number of packets of size 65 through 127 octets transmitted.
TX Packets 128 - 255
Octets
(MX2010 and MX2020 routers) Number of packets of size 128 through 255 octets transmitted.
TX Packets 256 - 511
Octets
(MX2010 and MX2020 routers) Number of packets of size 256 through 511 octets transmitted.
TX Packets 512 - 1023
Octets
(MX2010 and MX2020 routers) Number of packets of size 512 through 1023 octets transmitted.
TX Packets 1024 - 1518
Octets
(MX2010 and MX2020 routers) Number of packets of size 1024 through 1518 octets transmitted.
TX Packets 1519 - 2047
Octets
(MX2010 and MX2020 routers) Number of packets of size 1519 through 2047 octets transmitted.
TX Packets 2048 4095 Octets
(MX2010 and MX2020 routers) Number of packets of size 2048 through 4095 octets transmitted.
TX Packets 4096 - 9216
Octets
(MX2010 and MX2020 routers) Number of packets of size 4096 through 9216 octets transmitted.
TX 1519 - 1522 Good
Vlan frms
(MX2010 and MX2020 routers) Number of transmitted frames of size 1519 through 1522 octets that
are good VLAN frames.
TX Octets
Number of octets sent.
TX Unicast packets
Number of unicast packets sent.
TX Multicast packets
Number of multicast packets sent.
TX Broadcast packets
Number of broadcast packets sent.
TX Single Collision
frames
(MX2010 and MX2020 routers) Number of packets sent after one collision.
TX Mult. Collision
frames
(MX2010 and MX2020 routers) Number of packets sent after multiple collisions.
Copyright © 2013, Juniper Networks, Inc.
327
PTX Series Packet Transport Switch Software Documentation
Table 24: show chassis ethernet-switch Output Fields (continued)
Field Name
Field Description
TX Late collisions
Number of packets aborted during sending because of collisions after 64 bytes.
TX Excessive collisions
Number of packets not sent because of too many collisions.
TX Dropped packets
Number of transmitted packets that were dropped.
TX PAUSEMAC Ctrl
Frames
Number of Media Access Control (MAC) frames containing PAUSE commands that were sent.
TX Oversize Packets
Number of oversize packets that were sent.
TX FCS Error Counter
Number of packets discarded because of frame check sequence errors.
TX Fragment Counter
Number of fragmented packets sent.
TX Byte Counter
Number of bytes sent.
TX Packet OK Counter
Number of viable packets sent.
TX Pause Packet
Counter
Number of PAUSE packets sent.
RX Packets 64 Octets
(MX2010 and MX2020 routers) Number of packets of size 64 octets received.
RX Packets 65 - 127
Octets
(MX2010 and MX2020 routers) Number of packets of size 65 through 127 octets received.
RX Packets 128 - 255
Octets
(MX2010 and MX2020 routers) Number of packets of size 128 through 255 octets received.
RX Packets 256 - 511
Octets
(MX2010 and MX2020 routers) Number of packets of size 256 through 511 octets received.
RX Packets 512 - 1023
Octets
(MX2010 and MX2020 routers) Number of packets of size 512 through 1023 octets received.
RX Packets 1024 - 1518
Octets
(MX2010 and MX2020 routers) Number of packets of size 1024 through 1518 octets received.
RX Packets 1519 - 2047
Octets
(MX2010 and MX2020 routers) Number of packets of size 1519 through 2047 octets received.
RX Packets 2048 4095 Octets
(MX2010 and MX2020 routers) Number of packets of size 2048 through 4095 octets received.
RX Packets 4096 - 9216
Octets
(MX2010 and MX2020 routers) Number of packets of size 4096 through 9216 octets received.
328
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 24: show chassis ethernet-switch Output Fields (continued)
Field Name
Field Description
RX Octets
Number of octets received.
RX Unicast packets
Number of unicast packets received.
RX Multicast packets
Number of multicast packets received.
RX Broadcast packets
Number of broadcast packets received.
RX FCS Errors
Number of packets discarded because of frame check sequence errors.
RX Alignment Errors
Number of incomplete octets received.
RX Dropped Packets
Number of incoming packets that were dropped.
RX Fragments
Number of fragmented packets received.
RX Symbol Errors
Number of symbols received that the router did not correctly decode.
RX MAC Control
Number of Media Access Control (MAC) packets received.
RX Oversize Packets
Number of oversize packets received.
RX Undersize Packets
Number of undersize packets received.
RX Jabbers
Total number of frames received that exceed the maximum byte count and contain CRC errors .
RX Control Frame
Counter
Number of control frames received.
RX Pause Frame
Counter
Number of pause frames received.
RX FCS Errors
Number of packets discarded because of frame check sequence errors.
RX Fragments
Number of fragmented packets received.
RX Byte Counter
Number of bytes received.
RX Packet OK Counter
Number of viable packets received.
Sample Output
show chassis ethernet-switch
user@host> show chassis ethernet-switch
Link is good on port 0 connected to device: FPC0
Speed is 100 MB
Duplex is full
Copyright © 2013, Juniper Networks, Inc.
329
PTX Series Packet Transport Switch Software Documentation
Link is good on port 1 connected to device: FPC1
Speed is 100 MB
Duplex is full
Link is good on port 2 connected to device: FPC2
Speed is 100 MB
Duplex is full
Link is good on port 3 connected to device: FPC3
Speed is 100 MBb
Duplex is full
Link is good on port 7 connected to device: Local controller
Speed is 100 MB
Duplex is full
Link is good on port 9 connected to device: SPMB
Speed is 100 MB
Duplex is full
Link is good on port 13 connected to device: FPC5
Speed is 100 MB
Duplex is full
show chassis ethernet-switch (MX480 Router with MPC4E)
user@host> show chassis ethernet-switch
Displaying summary for switch 0
Link is down on GE port 0 connected to device: FPC0
Link is down on GE port 1 connected to device: FPC1
Link is good on GE port 2 connected to device: FPC2
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 3 connected to device: FPC3
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 4 connected to device: FPC4
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 5 connected to device: FPC5
Link is down on GE port 6 connected to device: FPC6
Link is down on GE port 7 connected to device: FPC7
330
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Link is down on GE port 8 connected to device: FPC8
Link is down on GE port 9 connected to device: FPC9
Link is down on GE port 10 connected to device: FPC10
Link is down on GE port 11 connected to device: FPC11
Link is good on GE port 12 connected to device: Other RE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 13 connected to device: RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 14 connected to device: Debug-GigE
show chassis ethernet-switch (MX2010 Router)
user@host > show chassis ethernet-switch
Displaying summary for switch 0
Link is good on GE port 0 connected to device: FPC0
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 1 connected to device: FPC1
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 2 connected to device: FPC3
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 3 connected to device: FPC2
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 4 connected to device: FPC5
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Copyright © 2013, Juniper Networks, Inc.
331
PTX Series Packet Transport Switch Software Documentation
Flow Control RX is Disabled
Link is good on GE port 5 connected to device: FPC4
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 6 connected to device: FPC6
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 7 connected to device: FPC7
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 8 connected to device: FPC8
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 9 connected to device: FPC9
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 20 connected to device: Other RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 21 connected to device: RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 22 connected to device: Debug-GigE
Link is good on GE port 23 connected to device: SPMB
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on XE port 24 connected to device: SFP+ 0
332
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Link is down on XE port 25 connected to device: SFP+ 1
Link is down on XE port 26 connected to device: RE-10GigE
Link is down on XE port 27 connected to device: Other RE-10GigE
show chassis ethernet-switch statistics (MX2010 Router)
user@host > show chassis ethernet-switch statistics
Displaying port statistics for switch 0
Statistics for port 0 connected to device FPC0:
TX Packets 64 Octets
5088623
TX Packets 65-127 Octets
2637257
TX Packets 128-255 Octets
84829
TX Packets 256-511 Octets
120193
TX Packets 512-1023 Octets 252371
TX Packets 1024-1518 Octets 7189736
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
15373009
TX Multicast Packets
14
TX Broadcast Packets
1679654
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
3041239292
RX Packets 64 Octets
874260
RX Packets 65-127 Octets
26066124
RX Packets 128-255 Octets
1386532
RX Packets 256-511 Octets
150539
RX Packets 512-1023 Octets 4636799
RX Packets 1024-1518 Octets 92601
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
33206855
RX Multicast Packets
0
RX Broadcast Packets
279416
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
Copyright © 2013, Juniper Networks, Inc.
333
PTX Series Packet Transport Switch Software Documentation
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
958929187
Statistics for port 1 connected to device FPC1:
TX Packets 64 Octets
5109146
TX Packets 65-127 Octets
2779473
TX Packets 128-255 Octets
2441286
TX Packets 256-511 Octets
173102
TX Packets 512-1023 Octets 1547504
TX Packets 1024-1518 Octets 7190581
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
19241092
TX Multicast Packets
14
TX Broadcast Packets
1673369
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
4213380187
RX Packets 64 Octets
865914
RX Packets 65-127 Octets
26612151
RX Packets 128-255 Octets
1090153
RX Packets 256-511 Octets
25126
RX Packets 512-1023 Octets 101158
RX Packets 1024-1518 Octets 78092
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
28772594
RX Multicast Packets
0
RX Broadcast Packets
285669
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
2327283837
334
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Link is down on GE port 2 connected to device: FPC3
Link is down on GE port 3 connected to device: FPC2
Link is down on GE port 4 connected to device: FPC5
Link is down on GE port 5 connected to device: FPC4
Link is down on GE port 6 connected to device: FPC6
Link is down on GE port 7 connected to device: FPC7
Statistics for port 8 connected to device FPC8:
TX Packets 64 Octets
5341094
TX Packets 65-127 Octets
2625310
TX Packets 128-255 Octets
3315158
TX Packets 256-511 Octets
174805
TX Packets 512-1023 Octets 976908
TX Packets 1024-1518 Octets 7181498
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
19614773
TX Multicast Packets
14
TX Broadcast Packets
1673831
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
3946762991
RX Packets 64 Octets
955509
RX Packets 65-127 Octets
27568588
RX Packets 128-255 Octets
1460936
RX Packets 256-511 Octets
153248
RX Packets 512-1023 Octets 2856206
RX Packets 1024-1518 Octets 76419
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
33070906
RX Multicast Packets
0
RX Broadcast Packets
285183
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
Copyright © 2013, Juniper Networks, Inc.
335
PTX Series Packet Transport Switch Software Documentation
RX
RX
RX
RX
RX
RX
Jabbers
1519-1522 Good Vlan frms
MTU Exceed Counter
Control Frame Counter
Pause Frame Counter
Byte Counter
0
0
0
0
0
4256093824
Statistics for port 9 connected to device FPC9:
TX Packets 64 Octets
5237213
TX Packets 65-127 Octets
3268775
TX Packets 128-255 Octets
2320476
TX Packets 256-511 Octets
1789844
TX Packets 512-1023 Octets 501022
TX Packets 1024-1518 Octets 7800455
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
20917785
TX Multicast Packets
14
TX Broadcast Packets
1673368
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
747012161
RX Packets 64 Octets
1036527
RX Packets 65-127 Octets
27590367
RX Packets 128-255 Octets
1590059
RX Packets 256-511 Octets
328257
RX Packets 512-1023 Octets 75975
RX Packets 1024-1518 Octets 73556
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
30694741
RX Multicast Packets
0
RX Broadcast Packets
285586
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
336
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
RX Byte Counter
2727836941
Statistics for port 20 connected to device Other RE-GigE:
TX Packets 64 Octets
1682540
TX Packets 65-127 Octets
3454
TX Packets 128-255 Octets
659
TX Packets 256-511 Octets
0
TX Packets 512-1023 Octets 1
TX Packets 1024-1518 Octets 0
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1686654
TX Multicast Packets
6
TX Broadcast Packets
1673798
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
108042476
RX Packets 64 Octets
710214
RX Packets 65-127 Octets
35785510
RX Packets 128-255 Octets
4616
RX Packets 256-511 Octets
232
RX Packets 512-1023 Octets 565
RX Packets 1024-1518 Octets 28798
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
36529935
RX Multicast Packets
8
RX Broadcast Packets
285546
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
2676440958
Statistics for port 21 connected to device RE-GigE:
TX Packets 64 Octets
4805310
TX Packets 65-127 Octets
143798628
Copyright © 2013, Juniper Networks, Inc.
337
PTX Series Packet Transport Switch Software Documentation
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
Packets 128-255 Octets
Packets 256-511 Octets
Packets 512-1023 Octets
Packets 1024-1518 Octets
Packets 1519-2047 Octets
Packets 2048-4095 Octets
Packets 4096-9216 Octets
1519-1522 Good Vlan frms
Octets
Multicast Packets
Broadcast Packets
Single Collision frames
Mult. Collision frames
Late Collisions
Excessive Collisions
Collision frames
PAUSEMAC Ctrl Frames
MAC ctrl frames
Frame deferred Xmns
Frame excessive deferl
Oversize Packets
Jabbers
FCS Error Counter
Fragment Counter
Byte Counter
Packets 64 Octets
Packets 65-127 Octets
Packets 128-255 Octets
Packets 256-511 Octets
Packets 512-1023 Octets
Packets 1024-1518 Octets
Packets 1519-2047 Octets
Packets 2048-4095 Octets
Packets 4096-9216 Octets
Octets
Multicast Packets
Broadcast Packets
FCS Errors
Align Errors
Fragments
Symbol errors
Unsupported opcodes
Out of Range Length
False Carrier Errors
Undersize Packets
Oversize Packets
Jabbers
1519-1522 Good Vlan frms
MTU Exceed Counter
Control Frame Counter
Pause Frame Counter
Byte Counter
5532385
671059
7684123
344021
0
0
0
0
162835526
8
1673409
0
0
0
0
0
0
0
0
0
0
0
0
0
105857355
14537137
11445505
8161767
2257944
3277807
29373209
0
0
0
69053369
6
285935
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2980410755
Link is down on GE port 22 connected to device: Debug-GigE
Statistics for port 23 connected to device SPMB:
TX Packets 64 Octets
1885878
TX Packets 65-127 Octets
138845
TX Packets 128-255 Octets
18
TX Packets 256-511 Octets
1
TX Packets 512-1023 Octets 2
TX Packets 1024-1518 Octets 16391
338
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
Packets 1519-2047 Octets
Packets 2048-4095 Octets
Packets 4096-9216 Octets
1519-1522 Good Vlan frms
Octets
Multicast Packets
Broadcast Packets
Single Collision frames
Mult. Collision frames
Late Collisions
Excessive Collisions
Collision frames
PAUSEMAC Ctrl Frames
MAC ctrl frames
Frame deferred Xmns
Frame excessive deferl
Oversize Packets
Jabbers
FCS Error Counter
Fragment Counter
Byte Counter
Packets 64 Octets
Packets 65-127 Octets
Packets 128-255 Octets
Packets 256-511 Octets
Packets 512-1023 Octets
Packets 1024-1518 Octets
Packets 1519-2047 Octets
Packets 2048-4095 Octets
Packets 4096-9216 Octets
Octets
Multicast Packets
Broadcast Packets
FCS Errors
Align Errors
Fragments
Symbol errors
Unsupported opcodes
Out of Range Length
False Carrier Errors
Undersize Packets
Oversize Packets
Jabbers
1519-1522 Good Vlan frms
MTU Exceed Counter
Control Frame Counter
Pause Frame Counter
Byte Counter
0
0
0
0
2041135
14
1707267
0
0
0
0
0
0
0
0
0
0
0
0
0
148066476
374994
183398
749
13658
13421
9
0
0
0
586229
0
252034
0
0
0
0
0
0
0
0
0
0
0
0
0
0
51431942
Link is down on XE port 24 connected to device: SFP+ 0
Link is down on XE port 25 connected to device: SFP+ 1
Link is down on XE port 26 connected to device: RE-10GigE
Link is down on XE port 27 connected to device: Other RE-10GigE
show chassis ethernet-switch (MX2020 Router)
user@host > show chassis ethernet-switch
Copyright © 2013, Juniper Networks, Inc.
339
PTX Series Packet Transport Switch Software Documentation
Displaying summary for switch 0
Link is good on GE port 0 connected to device: FPC0
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 1 connected to device: FPC1
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 2 connected to device: FPC3
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 3 connected to device: FPC2
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 4 connected to device: FPC5
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 5 connected to device: FPC4
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 6 connected to device: FPC6
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 7 connected to device: FPC7
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 8 connected to device: FPC8
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
340
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 9 connected to device: FPC9
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 10 connected to device: FPC10
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 11 connected to device: FPC11
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 12 connected to device: FPC13
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 13 connected to device: FPC12
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 14 connected to device: FPC14
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 15 connected to device: FPC15
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 16 connected to device: FPC17
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 17 connected to device: FPC16
Speed is 1000Mb
Copyright © 2013, Juniper Networks, Inc.
341
PTX Series Packet Transport Switch Software Documentation
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 18 connected to device: FPC18
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 19 connected to device: FPC19
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 20 connected to device: Other RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 21 connected to device: RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 22 connected to device: Debug-GigE
Link is good on GE port 23 connected to device: SPMB
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on XE port 24 connected to device: SFP+ 0
Link is down on XE port 25 connected to device: SFP+ 1
Link is down on XE port 26 connected to device: RE-10GigE
Link is down on XE port 27 connected to device: Other RE-10GigE
show chassis ethernet-switch statistics (MX2020 Router)
user@host > show chassis ethernet-switch statistics
Displaying port statistics for switch 0
Statistics for port 0 connected to device FPC0:
TX Packets 64 Octets
1468564
TX Packets 65-127 Octets
153896
TX Packets 128-255 Octets
237
TX Packets 256-511 Octets
286
TX Packets 512-1023 Octets 599
TX Packets 1024-1518 Octets 22803
342
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1646385
TX Multicast Packets
6
TX Broadcast Packets
970939
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
130470290
RX Packets 64 Octets
180266
RX Packets 65-127 Octets
519030
RX Packets 128-255 Octets
1390
RX Packets 256-511 Octets
42857
RX Packets 512-1023 Octets 3482
RX Packets 1024-1518 Octets 8147
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
755172
RX Multicast Packets
0
RX Broadcast Packets
42822
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75374021
Statistics for port 1 connected to device FPC1:
TX Packets 64 Octets
1493739
TX Packets 65-127 Octets
126996
TX Packets 128-255 Octets
241
TX Packets 256-511 Octets
283
TX Packets 512-1023 Octets 604
TX Packets 1024-1518 Octets 33687
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1655550
TX Multicast Packets
6
Copyright © 2013, Juniper Networks, Inc.
343
PTX Series Packet Transport Switch Software Documentation
TX Broadcast Packets
969032
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
141832690
RX Packets 64 Octets
155655
RX Packets 65-127 Octets
545561
RX Packets 128-255 Octets
1394
RX Packets 256-511 Octets
42811
RX Packets 512-1023 Octets 3514
RX Packets 1024-1518 Octets 8171
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
757106
RX Multicast Packets
0
RX Broadcast Packets
44509
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75691392
Statistics for port 2 connected to device FPC3:
TX Packets 64 Octets
1465749
TX Packets 65-127 Octets
152849
TX Packets 128-255 Octets
238
TX Packets 256-511 Octets
289
TX Packets 512-1023 Octets 602
TX Packets 1024-1518 Octets 38903
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1658630
TX Multicast Packets
6
TX Broadcast Packets
968873
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
344
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
147427010
RX Packets 64 Octets
181636
RX Packets 65-127 Octets
517526
RX Packets 128-255 Octets
1405
RX Packets 256-511 Octets
42806
RX Packets 512-1023 Octets 3515
RX Packets 1024-1518 Octets 8168
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
755056
RX Multicast Packets
0
RX Broadcast Packets
44490
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75381869
Statistics for port 3 connected to device FPC2:
TX Packets 64 Octets
1473828
TX Packets 65-127 Octets
145643
TX Packets 128-255 Octets
253
TX Packets 256-511 Octets
285
TX Packets 512-1023 Octets 612
TX Packets 1024-1518 Octets 26603
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1647224
TX Multicast Packets
6
TX Broadcast Packets
968925
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
Copyright © 2013, Juniper Networks, Inc.
345
PTX Series Packet Transport Switch Software Documentation
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
134293832
RX Packets 64 Octets
174230
RX Packets 65-127 Octets
525756
RX Packets 128-255 Octets
1404
RX Packets 256-511 Octets
42815
RX Packets 512-1023 Octets 3530
RX Packets 1024-1518 Octets 8176
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
755911
RX Multicast Packets
0
RX Broadcast Packets
44499
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75517355
Statistics for port 4 connected to device FPC5:
TX Packets 64 Octets
1466664
TX Packets 65-127 Octets
151155
TX Packets 128-255 Octets
238
TX Packets 256-511 Octets
277
TX Packets 512-1023 Octets 615
TX Packets 1024-1518 Octets 54674
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1673623
TX Multicast Packets
6
TX Broadcast Packets
968610
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
164247790
RX Packets 64 Octets
180006
RX Packets 65-127 Octets
518217
RX Packets 128-255 Octets
1406
346
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
RX Packets 256-511 Octets
42787
RX Packets 512-1023 Octets 3515
RX Packets 1024-1518 Octets 8164
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
754095
RX Multicast Packets
0
RX Broadcast Packets
44457
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75311970
Statistics for port 5 connected to device FPC4:
TX Packets 64 Octets
1464770
TX Packets 65-127 Octets
154498
TX Packets 128-255 Octets
225
TX Packets 256-511 Octets
280
TX Packets 512-1023 Octets 637
TX Packets 1024-1518 Octets 26355
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1646765
TX Multicast Packets
6
TX Broadcast Packets
968730
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
134058606
RX Packets 64 Octets
169269
RX Packets 65-127 Octets
515285
RX Packets 128-255 Octets
1527
RX Packets 256-511 Octets
42804
RX Packets 512-1023 Octets 3521
RX Packets 1024-1518 Octets 9142
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
Copyright © 2013, Juniper Networks, Inc.
347
PTX Series Packet Transport Switch Software Documentation
RX Octets
741548
RX Multicast Packets
0
RX Broadcast Packets
44470
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75498393
Statistics for port 6 connected to device FPC6:
TX Packets 64 Octets
1475260
TX Packets 65-127 Octets
143324
TX Packets 128-255 Octets
260
TX Packets 256-511 Octets
274
TX Packets 512-1023 Octets 603
TX Packets 1024-1518 Octets 40631
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1660352
TX Multicast Packets
6
TX Broadcast Packets
968466
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
149212764
RX Packets 64 Octets
172275
RX Packets 65-127 Octets
526519
RX Packets 128-255 Octets
1394
RX Packets 256-511 Octets
42777
RX Packets 512-1023 Octets 3514
RX Packets 1024-1518 Octets 8161
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
754640
RX Multicast Packets
0
RX Broadcast Packets
44443
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
348
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75386517
Statistics for port 7 connected to device FPC7:
TX Packets 64 Octets
1472361
TX Packets 65-127 Octets
145646
TX Packets 128-255 Octets
251
TX Packets 256-511 Octets
250
TX Packets 512-1023 Octets 580
TX Packets 1024-1518 Octets 49530
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
1668618
TX Multicast Packets
6
TX Broadcast Packets
968317
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
158689814
RX Packets 64 Octets
174618
RX Packets 65-127 Octets
523421
RX Packets 128-255 Octets
1393
RX Packets 256-511 Octets
42764
RX Packets 512-1023 Octets 3514
RX Packets 1024-1518 Octets 8158
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
753868
RX Multicast Packets
0
RX Broadcast Packets
44429
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
Copyright © 2013, Juniper Networks, Inc.
349
PTX Series Packet Transport Switch Software Documentation
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
75309863
Statistics for port 8 connected to device FPC8:
...
show chassis ethernet-switch (MX2020 Router with MPC4E)
user@host > show chassis ethernet-switch
Displaying summary for switch 0
Link is good on GE port 0 connected to device: FPC0
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 1 connected to device: FPC1
Link is down on GE port 2 connected to device: FPC3
Link is down on GE port 3 connected to device: FPC2
Link is down on GE port 4 connected to device: FPC5
Link is down on GE port 5 connected to device: FPC4
Link is down on GE port 6 connected to device: FPC6
Link is down on GE port 7 connected to device: FPC7
Link is down on GE port 8 connected to device: FPC8
Link is good on GE port 9 connected to device: FPC9
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 10 connected to device: FPC10
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 11 connected to device: FPC11
Link is down on GE port 12 connected to device: FPC13
Link is down on GE port 13 connected to device: FPC12
Link is good on GE port 14 connected to device: FPC14
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
350
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Flow Control RX is Disabled
Link is down on GE port 15 connected to device: FPC15
Link is down on GE port 16 connected to device: FPC17
Link is down on GE port 17 connected to device: FPC16
Link is down on GE port 18 connected to device: FPC18
Link is good on GE port 19 connected to device: FPC19
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 20 connected to device: Other RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on GE port 21 connected to device: RE-GigE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on GE port 22 connected to device: Debug-GigE
Link is good on GE port 23 connected to device: SPMB
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is down on XE port 24 connected to device: SFP+ 0
Link is down on XE port 25 connected to device: SFP+ 1
Link is down on XE port 26 connected to device: RE-10GigE
Link is down on XE port 27 connected to device: Other RE-10GigE
show chassis ethernet-switch (TX Matrix Router)
user@host> show chassis ethernet-switch
scc-re0:
-------------------------------------------------------------------------Link is good on FE port 4 connected to device: LCC0
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 6 connected to device: LCC2
Speed is 100 MB
Duplex is full
Copyright © 2013, Juniper Networks, Inc.
351
PTX Series Packet Transport Switch Software Documentation
Autonegotiate is Enabled
Link is good on FE port 8 connected to device: SPMB
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
lcc0-re0:
-------------------------------------------------------------------------Link is good on FE port 1 connected to device: FPC1
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 2 connected to device: FPC2
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 8 connected to device: SPMB
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 10 connected to device: SCC
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
lcc2-re0:
-------------------------------------------------------------------------Link is good on FE port 0 connected to device: FPC0
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 1 connected to device: FPC1
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 2 connected to device: FPC2
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 8 connected to device: SPMB
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
Link is good on FE port 10 connected to device: SCC
Speed is 100 MB
Duplex is full
Autonegotiate is Enabled
show chassis ethernet-switch errors
user@host> show chassis ethernet-switch errors
Accumulated error counts for port 0 connected to device FPC0:
MLT3
2
352
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Lock
0
Xmit
0
ESD
0
False carrier 2
Disconnects
0
FX mode
0
Accumulated error counts
MLT3
2
Lock
0
Xmit
0
ESD
0
False carrier 2
Disconnects
0
FX mode
0
Accumulated error counts
MLT3
2
Lock
0
Xmit
0
ESD
0
False carrier 3
Disconnects
0
FX mode
0
Accumulated error counts
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
Accumulated error counts
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
...
for port 1 connected to device FPC1:
for port 2 connected to device FPC2:
for port 3 connected to device FPC3:
for port 4 connected to device Nothing:
show chassis ethernet-switch statistics
user@host> show chassis ethernet-switch statistics
Statistics for port 0 connected to device FPC0:
TX Unicast packets
68113
TX Multicast packets
0
TX Broadcast packets
20851
TX Late collisions
0
TX Excessive collisions
0
TX Dropped packets
0
RX
RX
RX
RX
RX
RX
RX
RX
Unicast packets
Multicast packets
Broadcast packets
FCS Errors
Alignment Errors
Dropped Packets
Fragments
Symbol Errors
67410
0
20852
0
0
0
0
0
Statistics for port 1 connected to device FPC1:
TX Unicast packets
66496
Copyright © 2013, Juniper Networks, Inc.
353
PTX Series Packet Transport Switch Software Documentation
TX
TX
TX
TX
TX
Multicast packets
Broadcast packets
Late collisions
Excessive collisions
Dropped packets
0
20080
0
0
0
RX
RX
RX
RX
RX
RX
RX
RX
Unicast packets
Multicast packets
Broadcast packets
FCS Errors
Alignment Errors
Dropped Packets
Fragments
Symbol Errors
66037
0
20080
0
0
0
0
0
Statistics for port 2 connected to device FPC2:
TX Unicast packets
64206
TX Multicast packets
0
TX Broadcast packets
21183
TX Late collisions
0
TX Excessive collisions
0
TX Dropped packets
0
RX Unicast packets
63671
RX Multicast packets
0
RX Broadcast packets
21183
RX FCS Errors
0
RX Alignment Errors
0
RX Dropped Packets
0
RX Fragments
0
RX Symbol Errors
0
Statistics for port 3 connected to device FPC3:
...
show chassis ethernet-switch errors (TX Matrix Plus Router)
user@host> show chassis ethernet-switch errors
sfc0-re0:
-------------------------------------------------------------------------Displaying error for switch 0
Displaying error for switch 1
Accumulated error counts for port 0 connected to device LCC0:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
lcc0-re0:
-------------------------------------------------------------------------Displaying error for switch 0
Accumulated error counts for port 6 connected to device FPC0:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 5
Disconnects
0
354
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FX mode
0
Accumulated error counts for port 7 connected to device FPC1:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 7
Disconnects
0
FX mode
0
Accumulated error counts for port 19 connected to device Other RE:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
Accumulated error counts for port 20 connected to device SFC0:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
show chassis ethernet-switch sfc errors (TX Matrix Plus Router)
user@host> show chassis ethernet-switch errors switch sfc
sfc0-re0:
-------------------------------------------------------------------------Displaying error for switch 1
Accumulated error counts for port 0 connected to device LCC0:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
Accumulated error counts for port 2 connected to device LCC1:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
Accumulated error counts for port 4 connected to device LCC2:
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 0
Disconnects
0
FX mode
0
Accumulated error counts for port 6 connected to device LCC3:
MLT3
0
Lock
0
Xmit
0
ESD
0
Copyright © 2013, Juniper Networks, Inc.
355
PTX Series Packet Transport Switch Software Documentation
False carrier
Disconnects
FX mode
0
0
0
lcc0-re0:
-------------------------------------------------------------------------error: command is not valid on the t1600
lcc1-re0:
-------------------------------------------------------------------------error: command is not valid on the t1600
lcc2-re0:
-------------------------------------------------------------------------error: command is not valid on the t1600
lcc3-re0:
-------------------------------------------------------------------------error: command is not valid on the t1600
show chassis ethernet-switch statistics (TX Matrix Plus Router)
user@host> show chassis ethernet-switch statistics
sfc0-re0:
-------------------------------------------------------------------------Displaying port statistics for switch 0
Statistics for port 1 connected to device 1GSW:
TX Packets 64 Octets
5183577
TX Packets 65-127 Octets
67820
TX Packets 128-255 Octets
772
TX Packets 256-511 Octets
136
TX Packets 512-1023 Octets 68
TX Packets 1024-1518 Octets 10881
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
5263254
TX Multicast Packets
16
TX Broadcast Packets
723403
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
349922253
TX Packet OK Counter
5263254
TX Pause Packet Counter
0
TX Unicast Counter
4539835
RX Packets 64 Octets
6513629
RX Packets 65-127 Octets
88761
RX Packets 128-255 Octets
6382
RX Packets 256-511 Octets
22027
RX Packets 512-1023 Octets 4319
RX Packets 1024-1518 Octets 49922
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Packets 9217-16383 Octets 0
RX Octets
6685040
RX Multicast Packets
4
RX Broadcast Packets
2137376
356
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
RX FCS Errors
0
RX Fragments
0
RX MAC Control Packets
0
RX Out of Range Length
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
509224602
RX Unicast Frame Count
4547660
RX Packet OK Count
6685040
Statistics for port 9 connected to device RE1:
TX Packets 64 Octets
2500318
TX Packets 65-127 Octets
443
TX Packets 128-255 Octets
0
TX Packets 256-511 Octets
0
TX Packets 512-1023 Octets 0
TX Packets 1024-1518 Octets 0
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
2500761
TX Multicast Packets
4
TX Broadcast Packets
2500757
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
160049670
TX Packet OK Counter
0
TX Pause Packet Counter
0
TX Unicast Counter
0
RX Packets 64 Octets
701191
RX Packets 65-127 Octets
5882
RX Packets 128-255 Octets
2
RX Packets 256-511 Octets
0
RX Packets 512-1023 Octets 17965
RX Packets 1024-1518 Octets 7
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Packets 9217-16383 Octets 0
RX Octets
725047
RX Multicast Packets
8
RX Broadcast Packets
2500757
RX FCS Errors
0
RX Fragments
0
RX MAC Control Packets
0
RX Out of Range Length
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
62402656
RX Unicast Frame Count
0
RX Packet OK Count
0
Statistics for port 17 connected to device RE0:
TX Packets 64 Octets
7214818
Copyright © 2013, Juniper Networks, Inc.
357
PTX Series Packet Transport Switch Software Documentation
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
Packets 65-127 Octets
94640
Packets 128-255 Octets
6384
Packets 256-511 Octets
22027
Packets 512-1023 Octets 22284
Packets 1024-1518 Octets 49929
Packets 1519-2047 Octets 0
Packets 2048-4095 Octets 0
Packets 4096-9216 Octets 0
Packets 9217-16383 Octets 0
Octets
7410082
Multicast Packets
12
Broadcast Packets
2497247
PAUSEMAC Ctrl Frames
0
Oversize Packets
0
FCS Error Counter
0
Fragment Counter
0
Byte Counter
571626932
Packet OK Counter
0
Pause Packet Counter
0
Unicast Counter
0
Packets 64 Octets
4823701
Packets 65-127 Octets
67812
Packets 128-255 Octets
772
Packets 256-511 Octets
136
Packets 512-1023 Octets 68
Packets 1024-1518 Octets 10881
Packets 1519-2047 Octets 0
Packets 2048-4095 Octets 0
Packets 4096-9216 Octets 0
Packets 9217-16383 Octets 0
Octets
4903370
Multicast Packets
8
Broadcast Packets
2497247
FCS Errors
0
Fragments
0
MAC Control Packets
0
Out of Range Length
0
Undersize Packets
0
Oversize Packets
0
Jabbers
0
Control Frame Counter
0
Pause Frame Counter
0
Byte Counter
326889517
Unicast Frame Count
0
Packet OK Count
0
Displaying port statistics for switch 1
Statistics for port 0 connected to device LCC0:
TX Packets 64 Octets
5053443
TX Packets 65-127 Octets
59737
TX Packets 128-255 Octets
768
TX Packets 256-511 Octets
87
TX Packets 512-1023 Octets 68
TX Packets 1024-1518 Octets 85
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
5114188
TX Multicast Packets
16
TX Broadcast Packets
1125742
358
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
TX MAC ctrl frames
0
TX Frame deferred Xmns
0
TX Frame excessive deferl
0
TX Oversize Packets
0
TX Jabbers
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
329291449
RX Packets 64 Octets
5640175
RX Packets 65-127 Octets
79875
RX Packets 128-255 Octets
6338
RX Packets 256-511 Octets
165
RX Packets 512-1023 Octets 4317
RX Packets 1024-1518 Octets 10
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Octets
5730880
RX Multicast Packets
4
RX Broadcast Packets
1735007
RX FCS Errors
0
RX Align Errors
0
RX Fragments
0
RX Symbol errors
0
RX Unsupported opcodes
0
RX Out of Range Length
0
RX False Carrier Errors
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX 1519-1522 Good Vlan frms 0
RX MTU Exceed Counter
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
371282850
Statistics for port 18 connected to device SPMB:
TX Packets 64 Octets
2990326
TX Packets 65-127 Octets
8572
TX Packets 128-255 Octets
4
TX Packets 256-511 Octets
49
TX Packets 512-1023 Octets 0
TX Packets 1024-1518 Octets 10793
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX 1519-1522 Good Vlan frms 0
TX Octets
3009744
TX Multicast Packets
20
TX Broadcast Packets
2458322
TX Single Collision frames 0
TX Mult. Collision frames
0
TX Late Collisions
0
TX Excessive Collisions
0
TX Collision frames
0
TX PAUSEMAC Ctrl Frames
0
Copyright © 2013, Juniper Networks, Inc.
359
PTX Series Packet Transport Switch Software Documentation
TX
TX
TX
TX
TX
TX
TX
TX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
...
MAC ctrl frames
Frame deferred Xmns
Frame excessive deferl
Oversize Packets
Jabbers
FCS Error Counter
Fragment Counter
Byte Counter
Packets 64 Octets
Packets 65-127 Octets
Packets 128-255 Octets
Packets 256-511 Octets
Packets 512-1023 Octets
Packets 1024-1518 Octets
Packets 1519-2047 Octets
Packets 2048-4095 Octets
Packets 4096-9216 Octets
Octets
Multicast Packets
Broadcast Packets
FCS Errors
Align Errors
Fragments
Symbol errors
Unsupported opcodes
Out of Range Length
False Carrier Errors
Undersize Packets
Oversize Packets
Jabbers
1519-1522 Good Vlan frms
MTU Exceed Counter
Control Frame Counter
Pause Frame Counter
Byte Counter
0
0
0
0
0
0
0
203712524
873454
8886
44
21862
2
49912
0
0
0
954160
0
402369
0
0
0
0
0
0
0
0
0
0
0
0
0
0
137941752
show chassis ethernet-switch (T4000 Router)
user@host> show chassis ethernet-switch
Displaying summary for switch 0
Link is good on GE port 6 connected to device: FPC0
Speed is 100Mb
Duplex is full
Autonegotiate is Enabled
False carrier sense count = 04
Link is good on GE port 9 connected to device: FPC3
Speed is 100Mb
Duplex is full
Autonegotiate is Enabled
False carrier sense count = 03
Link is good on GE port 11 connected to device: FPC5
Speed is 100Mb
Duplex is full
Autonegotiate is Enabled
False carrier sense count = 03
Link is good on GE port 12 connected to device: FPC6
Speed is 100Mb
360
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Duplex is full
Autonegotiate is Enabled
False carrier sense count = 03
Link is good on GE port 14 connected to device: SPMB
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
Link is good on GE port 18 connected to device: RE
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Link is good on GE port 19 connected to device: Other RE
Speed is 1000Mb
Duplex is full
Autonegotiate is Enabled
show chassis ethernet-switch errors (T4000 Router)
user@host> show chassis ethernet-switch errors
Displaying error for switch 0
Accumulated error counts for port
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 4
Disconnects
0
FX mode
0
Accumulated error counts for port
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 3
Disconnects
0
FX mode
0
Accumulated error counts for port
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 3
Disconnects
0
FX mode
0
Accumulated error counts for port
MLT3
0
Lock
0
Xmit
0
ESD
0
False carrier 3
Disconnects
0
FX mode
0
Accumulated error counts for port
MLT3
0
Lock
0
Xmit
0
ESD
0
Copyright © 2013, Juniper Networks, Inc.
6 connected to device FPC0:
9 connected to device FPC3:
11 connected to device FPC5:
12 connected to device FPC6:
19 connected to device Other RE:
361
PTX Series Packet Transport Switch Software Documentation
False carrier
Disconnects
FX mode
0
0
0
show chassis ethernet-switch (PTX5000 Packet Transport Switch)
user@host> show chassis ethernet-switch
Displaying summary for switch 0
Link is good on XE port 2 connected to device: SPMB
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 11 connected to device: FPC7
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 12 connected to device: FPC6
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 13 connected to device: FPC5
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 15 connected to device: FPC3
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 16 connected to device: FPC2
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 18 connected to device: FPC0
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 19 connected to device: OTHER RE
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
362
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Flow Control TX is Disabled
Flow Control RX is Disabled
Link is good on XE port 20 connected to device: RE
Speed is 1000Mb
Duplex is full
Autonegotiate is Disabled
Flow Control TX is Disabled
Flow Control RX is Disabled
show chassis ethernet-switch statistics (PTX5000 Packet Transport Switch)
user@host> show chassis ethernet-switch statistics
Displaying port statistics for switch 0
Statistics for port 2 connected to device SPMB:
TX Packets 64 Octets
10942
TX Packets 65-127 Octets
843
TX Packets 128-255 Octets
2
TX Packets 256-511 Octets
2
TX Packets 512-1023 Octets 0
TX Packets 1024-1518 Octets 6862
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
18651
TX Multicast Packets
6
TX Broadcast Packets
10331
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
8105166
TX Packet OK Counter
0
TX Pause Packet Counter
0
TX Unicast Counter
0
RX Packets 64 Octets
8679
RX Packets 65-127 Octets
2364
RX Packets 128-255 Octets
531
RX Packets 256-511 Octets
112
RX Packets 512-1023 Octets 26
RX Packets 1024-1518 Octets 8
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Packets 9217-16383 Octets 0
RX Octets
11720
RX Multicast Packets
0
RX Broadcast Packets
10331
RX FCS Errors
0
RX Fragments
0
RX MAC Control Packets
0
RX Out of Range Length
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
938105
RX Unicast Frame Count
0
RX Packet OK Count
0
Copyright © 2013, Juniper Networks, Inc.
363
PTX Series Packet Transport Switch Software Documentation
Statistics for port 11 connected to device FPC7:
TX Packets 64 Octets
14492
TX Packets 65-127 Octets
3542
TX Packets 128-255 Octets
6
TX Packets 256-511 Octets
45
TX Packets 512-1023 Octets 60
Continued...
Statistics for port 18 connected to device FPC0:
TX Packets 64 Octets
15212
TX Packets 65-127 Octets
3810
TX Packets 128-255 Octets
6
TX Packets 256-511 Octets
43
TX Packets 512-1023 Octets 66
TX Packets 1024-1518 Octets 169
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
19306
TX Multicast Packets
0
TX Broadcast Packets
10886
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
1569412
TX Packet OK Counter
0
TX Pause Packet Counter
0
TX Unicast Counter
0
RX Packets 64 Octets
17994
RX Packets 65-127 Octets
8006
RX Packets 128-255 Octets
230
RX Packets 256-511 Octets
19
RX Packets 512-1023 Octets 53
RX Packets 1024-1518 Octets 11
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Packets 9217-16383 Octets 0
RX Octets
26313
RX Multicast Packets
0
RX Broadcast Packets
10886
RX FCS Errors
0
RX Fragments
0
RX MAC Control Packets
0
RX Out of Range Length
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX Control Frame Counter
2
RX Pause Frame Counter
2
RX Byte Counter
1836287
RX Unicast Frame Count
0
RX Packet OK Count
0
Statistics for port 19 connected to device OTHER RE:
TX Packets 64 Octets
10234
TX Packets 65-127 Octets
162
TX Packets 128-255 Octets
0
TX Packets 256-511 Octets
0
364
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
TX Packets 512-1023 Octets 0
TX Packets 1024-1518 Octets 0
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
10396
TX Multicast Packets
8
TX Broadcast Packets
10317
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
666260
TX Packet OK Counter
0
TX Pause Packet Counter
0
TX Unicast Counter
0
RX Packets 64 Octets
4073
RX Packets 65-127 Octets
325
RX Packets 128-255 Octets
1
RX Packets 256-511 Octets
0
RX Packets 512-1023 Octets 0
RX Packets 1024-1518 Octets 72
RX Packets 1519-2047 Octets 0
RX Packets 2048-4095 Octets 0
RX Packets 4096-9216 Octets 0
RX Packets 9217-16383 Octets 0
RX Octets
4471
RX Multicast Packets
0
RX Broadcast Packets
10317
RX FCS Errors
0
RX Fragments
0
RX MAC Control Packets
0
RX Out of Range Length
0
RX Undersize Packets
0
RX Oversize Packets
0
RX Jabbers
0
RX Control Frame Counter
0
RX Pause Frame Counter
0
RX Byte Counter
387333
RX Unicast Frame Count
0
RX Packet OK Count
0
Statistics for port 20 connected to device RE:
TX Packets 64 Octets
658856
TX Packets 65-127 Octets
45535
TX Packets 128-255 Octets
1900
TX Packets 256-511 Octets
532
TX Packets 512-1023 Octets 372
TX Packets 1024-1518 Octets 191
TX Packets 1519-2047 Octets 0
TX Packets 2048-4095 Octets 0
TX Packets 4096-9216 Octets 0
TX Packets 9217-16383 Octets 0
TX Octets
707386
TX Multicast Packets
0
TX Broadcast Packets
10421
TX PAUSEMAC Ctrl Frames
0
TX Oversize Packets
0
TX FCS Error Counter
0
TX Fragment Counter
0
TX Byte Counter
46608676
Copyright © 2013, Juniper Networks, Inc.
365
PTX Series Packet Transport Switch Software Documentation
TX
TX
TX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
RX
Packet OK Counter
0
Pause Packet Counter
0
Unicast Counter
0
Packets 64 Octets
27394
Packets 65-127 Octets
20271
Packets 128-255 Octets
78
Packets 256-511 Octets
215
Packets 512-1023 Octets 269
Packets 1024-1518 Octets 253370
Packets 1519-2047 Octets 0
Packets 2048-4095 Octets 0
Packets 4096-9216 Octets 0
Packets 9217-16383 Octets 0
Octets
301597
Multicast Packets
8
Broadcast Packets
10421
FCS Errors
0
Fragments
0
MAC Control Packets
0
Out of Range Length
0
Undersize Packets
0
Oversize Packets
0
Jabbers
0
Control Frame Counter
0
Pause Frame Counter
0
Byte Counter
275043436
Unicast Frame Count
0
Packet OK Count
0
Continued ...
show chassis ethernet-switch port-state (PTX5000 Packet Transport Switch)
user@host>
Displaying
Port
Target
show chassis ethernet-switch port-state
port state for switch 0
: 02
: SPMB
Error reading port 2 connected to device: SPMB
366
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fabric degraded-fabric-reachability
Syntax
show chassis fabric degraded-fabric-reachability
Release Information
Command introduced in Junos OS Release 12.1X48R4 for PTX Series Packet Transport
Switches.
Description
Display the current state of reachability between the Packet Forwarding Engines in the
system.
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
view
•
show chassis fabric errors on page 369
•
show chassis fabric reachability
•
degraded on page 109
show chassis fabric degraded-fabric-reachability on page 367
Table 25 on page 367 lists the output fields for the show chassis fabric
degraded-fabric-reachability command. Output fields are listed in the approximate order
in which they appear.
Table 25: show chassis fabric degraded-fabric-reachability Output Fields
Field Name
Field Description
FPC
Display fabric reachability for the displayed FPC slot.
PFE
Display fabric reachability for the displayed PFE slot on a per SIB and plane basis.
SIBx_Plane y
Display the SIB (x) and plane (y) where link errors occurred.
Link errors FPC/PFEs
Display the list of FPC and PFE slots that are unreachable for the displayed SIB and plane
due to link errors.
Sample Output
show chassis fabric degraded-fabric-reachability
user@host> show chassis fabric degraded-fabric-reachability
Degraded Fabric reachability Information:
FPC #0
PFE #0
SIB0_Plane 0
Link errors FPC/PFEs
2/0 5/0 5/1 5/2 5/3
SIB0_Plane 1
Link errors FPC/PFEs
2/0 5/0
PFE #1
SIB0_Plane 0
Copyright © 2013, Juniper Networks, Inc.
367
PTX Series Packet Transport Switch Software Documentation
Link errors
SIB0_Plane 1
Link errors
368
FPC/PFEs
2/0 5/0 5/1 5/2 5/3
FPC/PFEs
2/0 5/0
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fabric errors
Syntax
Syntax (PTX Series
Packet Transport
Switches)
Release Information
Description
show chassis fabric errors
<fpc slot-number lcc number>
<sib (slot | f13 sib-slot | f2s sib-slot/sib-f2s-slot-number | lcc number)>
show chassis fabric errors
(autoheal | fpc slot-number | sib sib-slot)
Command introduced in Junos OS Release 10.0.
Command introduced in Junos OS Release 12.1X48 for the PTX Series Packet Transport
Switches.
Display the first ten and last ten fabric errors for the FPC or Switch Interface Boards
(SIBs).
NOTE: This command can only be issued on a master Routing Engine.
Options
autoheal—(PTX Series Packet Transport Switches only) Show an error log of the first
100 autoheal actions taken on the system.
fpc slot-number—Show error log of the first ten and last ten errors for the specified FPC.
(PTX5000 Packet Transport Switches only)—Replace slot-number with a value from
0 through 7.
(TX Matrix Plus routers only)—Replace slot-number with a value from 0 through 31.
This option has the following suboptions:
•
lcc number—Show error log of the first ten and last ten errors for the specified FPC
on a specific network device (or line-card chassis) that is part of the routing matrix.
Replace number with a value from 0 through 3.
If you specify the number of the network device by using only the lcc number option
(the recommended method), replace slot-number with a value from 0 through 7.
Otherwise, replace slot-number with a value from 0 through 31. For example, the
following commands have the same result:
user@host> show chassis fabric errors fpc 1 lcc 1
user@host> show chassis fabric errors fpc 9
sib—Show error log of the first ten and last ten errors for the specified SIB. This option
has the following suboptions:
•
(TX Matrix Plus routers)sib-slot—Specify a value ranging from 0 through 4.
•
(PTX Series Packet Transport Switches) sib-slot—Specify a value ranging from 0
through 8.
Copyright © 2013, Juniper Networks, Inc.
369
PTX Series Packet Transport Switch Software Documentation
•
f13 sib-slot—(Optional) Show SIB F13 errors. Specify a valid SIB value number: 0,
1, 3, 4, 6, 7, 8, 9, 11, or 12.
•
f2s sib-slot/sib-f2s-slot-number—(Optional) Show SIB F2S errors. Replace sib-slot
with a value from 0 through 4, followed by a sib-f2s-slot-number value 0, 2, 4 or 6.
•
lcc number—(Optional) Show error log of the first ten and last ten SIB errors for
the specified network device (or line-card chassis). Replace number with a value
from 0 through 3.
NOTE: The lcc number suboption is mandatory when using the following
format for the command: show chassis fabric errors sib lcc number sib
slot-number. For instance, issuing show chassis fabric errors sib lcc 2 3
displays errors detected on LCC 2, SIB 3.
This suboption is not required when the f13 or f2s suboptions are used
with the sib slot-number option.
Required Privilege
Level
view
List of Sample Output
show chassis fabric errors (F13 SIB Errors on a TX Matrix Plus Router) on page 371
show chassis fabric errors (F2S SIB Errors on a TX Matrix Plus Router) on page 371
show chassis fabric errors (SIB Errors Specific to an LCC Connected to a TX Matrix
Plus Router) on page 371
show chassis fabric errors (FPC Errors Specific to an LCC Connected to a TX Matrix
Plus Router) on page 372
show chassis fabric errors fpc or sib (PTX Series Packet Transport Switches) on page 372
show chassis fabric errors autoheal (PTX Series Packet Transport Switches) on page 372
Output Fields
Table 26 on page 370 lists the output fields for the show chassis fabric errors command.
Output fields are listed in the approximate order in which they appear.
Table 26: show chassis fabric errors Output Fields
Field Name
Field Description
Time
Time the error was logged.
(PTX Series Packet Transport Switches only) For the autoheal
option, shows the timestamp when autoheal was attempted on a
SIB that was in fault state.
370
Error log of first 10 errors
List of the first ten errors.
Error log of last 10 errors
List of the last ten errors.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 26: show chassis fabric errors Output Fields (continued)
Field Name
Field Description
Error log of first 100 errors
Indicates the autoheal action taken on the SIB. The following actions
can occur:
•
Req—A SIB autoheal request was made on a faulty SIB.
•
Action—Autohealing (taking the SIB offline and then online) is
initiated.
•
Denied—Autohealing (taking the SIB offline and then online) is
denied because the SIB went to a fault state before the autoheal
configuration period completed.
•
Set info—Setting information to force skipping autoheal on the
SIB so that no further attempts to autoheal the faulty SIB are
made.
•
Clear info— if a user takes a SIB offline and then online, then the
autoheal information of the SIB is cleared. If the SIB goes to a
fault state, autoheal is attempted on the SIB.
fpc slot number
(PTX5000 Packet Transport Switch only)—Range is 0 through 7.
sib slot number
(PTX Series Packet Transport Switches only)—Range is 0 through
8.
lcc number
Not supported on PTX Series Packet Transport Switches.
Sample Output
show chassis fabric errors (F13 SIB Errors on a TX Matrix Plus Router)
user@host> show chassis fabric errors sib f13 11
Time
2009-10-06 02:21:17 PDT
Error log of first 10 errors
LOS on Cable-D(1,0)
show chassis fabric errors (F2S SIB Errors on a TX Matrix Plus Router)
user@host> show chassis fabric errors sib f2s 0/0
Time
2009-10-06 13:51:42 PDT
Error log of first 10 errors
Cell drop errors on CLOS F2 SF 0 Port 0 link
show chassis fabric errors (SIB Errors Specific to an LCC Connected to a TX Matrix Plus Router)
user@host> show chassis fabric errors sib 1 lcc 0
lcc0-re0:
-------------------------------------------------------------------------Time
Error log of first 10 errors
2009-10-06 02:23:16 PDT
Cell drop errors on FPC7_T link
2009-10-06 02:23:16 PDT
Cell drop errors on FPC7_B link
Copyright © 2013, Juniper Networks, Inc.
371
PTX Series Packet Transport Switch Software Documentation
show chassis fabric errors (FPC Errors Specific to an LCC Connected to a TX Matrix Plus Router)
user@host> show chassis fabric errors fpc 5 lcc 0
lcc0-re0:
-------------------------------------------------------------------------Time
Error log of first 10 errors
2009-10-06 13:56:59 PDT
PFE_T has link error on plane 1
show chassis fabric errors fpc or sib (PTX Series Packet Transport Switches)
user@host> show chassis fabric errors fpc 1
Time
Error log of first 10 errors
2012-01-06 16:27:03 PST
Link errs on PFE 2, SIB 0, Plane 0
user@host> show chassis fabric errors sib 1
Time
Error log of first 10 errors
2012-01-06 15:34:33 PST
Link errs on PFE 0, FPC 0, Plane 2
show chassis fabric errors autoheal (PTX Series Packet Transport Switches)
user@host>
Time
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
2012-04-13
372
show chassis fabric errors autoheal
Error log of first 100 errors
10:35:48 PDT
Req: sib 2
10:35:53 PDT
Action: SIB 2 (autohealing)
10:35:54 PDT
Req: sib 3
10:35:57 PDT
Action: SIB 3 (autohealing)
10:35:59 PDT
Req: sib 5
10:35:59 PDT
Action: SIB 5 (autohealing)
10:37:01 PDT
Req: sib 2
10:37:02 PDT
Denied: Sib 2 (time less than user configured)
10:37:02 PDT
Set info: SIB 2 (skip autoheal)
10:37:05 PDT
Clear info: SIB 2
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fabric fpcs
Syntax
show chassis fabric fpcs
<lcc number>
Syntax (MX Series
Routers)
show chassis fabric fpcs
Syntax (EX Series
Switches)
show chassis fabric fpcs
<all-members>
<local>
<member member-id>
Syntax (T4000 Core
Router)
show chassis fabric fpcs
Syntax (PTX Series
Packet Transport
Switches)
Release Information
Description
Options
show chassis fabric fpcs <slot fpc-slot>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
(M320, MX Series, and T Series routers, EX8200 switches, and PTX Series Packet
Transport Switches only) Display the state of the electrical switch fabric links between
the Flexible PIC Concentrators (FPCs) and the Switch Interface Boards (SIBs).
none—Display the switch fabric link state. On a TX Matrix router, display the switching
fabric link states for the FPCs in all T640 routers connected to the TX Matrix router.
On a TX Matrix Plus router, display the switching fabric link states for the FPCs in all
T1600 routers connected to the TX Matrix Plus router.
all-members—(EX Series switches only) (Optional) Display the switching fabric link states
for the FPCs in all members of the Virtual Chassis configuration.
lcc number—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
display the switch fabric link state for the FPCs in the specified T640 router (or
line-card chassis) that is connected to the TX Matrix router. On a TX Matrix Plus
router, display the switch fabric link state for the FPCs in the specified T1600 router
(or line-card chassis) that is connected to the TX Matrix Plus router. Replace number
with a value from 0 through 3.
local—(EX Series switches only) (Optional) Display the switching fabric link states for
the FPCs in the local Virtual Chassis member.
member member-id—(EX Series switches only) (Optional) Display the switching fabric
link states for the FPCs in the specified member of the Virtual Chassis configuration.
Replace member-id with a value of 0 or 1.
Copyright © 2013, Juniper Networks, Inc.
373
PTX Series Packet Transport Switch Software Documentation
slot fpc-slot—(PTX Series Packet Transport Switches only) (Optional) Display the fabric
state of the specified FPC slot. If no value is provided, display the status of all FPCs.
Required Privilege
Level
List of Sample Output
Output Fields
374
view
show chassis fabric fpcs (M320 Router) on page 375
show chassis fabric fpcs (MX240 Router) on page 376
show chassis fabric fpcs (MX480 Router) on page 376
show chassis fabric fpcs (MX960 Router) on page 377
show chassis fabric fpcs (MX240 with AS MLC Modular Carrier Card) on page 378
show chassis fabric fpcs (MX480 with AS MLC Modular Carrier Card) on page 379
show chassis fabric fpcs (MX480 Router with MPC4E) on page 380
show chassis fabric fpcs (MX960 Router with AS MLC Modular Carrier Card on page 381
show chassis fabric fpcs (MX2010 Router) on page 383
show chassis fabric fpcs (MX2020 Router) on page 386
show chassis fabric fpcs (MX2020 Router with MPC4E) on page 389
show chassis fabric fpcs (T320 Router) on page 390
show chassis fabric fpcs (T640 Router) on page 391
show chassis fabric fpcs (TX Matrix Router) on page 391
show chassis fabric fpcs (T1600 Router) on page 393
show chassis fabric fpcs (T4000 Core Router) on page 394
show chassis fabric fpcs (TX Matrix Plus Router) on page 395
show chassis fabric fpcs lcc (TX Matrix Plus Router) on page 403
show chassis fabric fpcs (EX8200 Switch) on page 404
show chassis fabric fpcs (PTX Series Packet Transport Switches) on page 405
Table 27 on page 375 lists the output fields for the show chassis fabric fpcs command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 27: show chassis fabric fpcs Output Fields
Field Name
Field Description
Fabric management FPC
state
Switching fabric link (link from SIB to FPC) state for each FPC:
•
Unused—FPC is not present.
(On MX240 and MX480 routers with AS- MLC modular carrier
card or MPC4E only) the fabric plane from the pair that share
physical links (1 and 5, and 3 and 7) is inactive.
•
Destination error on PFEs list of PFE numbers—Destination errors
to the listed Packet Forwarding Engines. Indicates that the link
is not carrying traffic to the listed Packet Forwarding Engines.
NOTE: In Junos OS Release 9.6 and later, the list of Packet
Forwarding Engines with destination errors is displayed in the output.
In Junos OS Releases before 9.6, the output only indicates that there
are destination errors. However, the list of Packet Forwarding
Engines with destination errors is not displayed.
•
Links ok—Link between the spare SIB and FPC is eligible to carry
traffic.
•
Link error—Link between the SIB and FPC has CRC errors.
However, the link is still eligible to carry traffic.
•
Plane disabled—Fabric plane has been disabled for the following
reasons:
•
Destination errors have exceeded the thresholds.
•
Run-time link errors have exceeded the thresholds.
•
Initialization time link errors detected, and link training was
unsuccessful.
•
Plane Disabled, Links Error (PTX Series Packet Transport
Switches only)—The plane is disabled because of link errors
detected at the FPC RX.
•
Plane Disabled, Links Down (PTX Series Packet Transport
Switches only)—The plane is disabled because of link errors
detected at the SIB RX.
•
Plane enabled—Link between the active SIB and FPC is eligible
to carry traffic.
NOTE: On the Enhanced MX SCB with MPC, a maximum of 4 planes
are operational and running. On all the other SCBs with MPC, all the
planes are operational and running.
•
Plane Enabled, Links OK (PTX Series Packet Transport Switches
only)—The FPC CCL RX link is eligible to carry traffic.
Sample Output
show chassis fabric fpcs (M320 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC #2
PFE #1
SIB #0
Plane enabled
Copyright © 2013, Juniper Networks, Inc.
375
PTX Series Packet Transport Switch Software Documentation
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
show chassis fabric fpcs (MX240 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC 2
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
PFE #2
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
PFE #3
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
show chassis fabric fpcs (MX480 Router)
user@host> show chassis fabric fpcs
FPC 0
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
376
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 1
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
6: Links ok
7: Links ok
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Links
Links
Links
Links
enabled
enabled
enabled
enabled
ok
ok
ok
ok
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Links
Links
Links
Links
enabled
enabled
enabled
enabled
ok
ok
ok
ok
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Links
Links
Links
Links
enabled
enabled
enabled
enabled
ok
ok
ok
ok
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
show chassis fabric fpcs (MX960 Router)
user@host> show chassis fabric fpcs
FPC 0
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
PFE #1
Copyright © 2013, Juniper Networks, Inc.
377
PTX Series Packet Transport Switch Software Documentation
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
FPC 1
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
FPC 2
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
...
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
Plane
Plane
Plane
Plane
Links
enabled
enabled
enabled
enabled
ok
show chassis fabric fpcs (MX240 with AS MLC Modular Carrier Card)
In the following output, FPC 1 is the AS MLC modular carrier card (AS MCC).
378
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
user@host>show chassis fabric fpcs
FPC 1
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Unused
Plane 6: Plane enabled
Plane 7: Unused
FPC 2
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
show chassis fabric fpcs (MX480 with AS MLC Modular Carrier Card)
In the following output, FPC 5 is the AS MLC modular carrier card (AS MCC).
user@host>show chassis fabric fpcs
FPC 2
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 4
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
PFE #2
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
FPC 5
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
379
PTX Series Packet Transport Switch Software Documentation
Plane
Plane
Plane
Plane
Plane
3:
4:
5:
6:
7:
Plane enabled
Plane enabled
Unused
Plane enabled
Unused
show chassis fabric fpcs (MX480 Router with MPC4E)
In the following output, FPC 4 is the MPC4E (MPC4E-3D-32XGE-SFPP) card.
user@host>show chassis fabric fpcs
Fabric management FPC state:
FPC 0
PFE #0
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Links ok
Plane 6: Plane enabled
Plane 7: Links ok
PFE #1
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Links ok
Plane 6: Plane enabled
Plane 7: Links ok
FPC 1
PFE #0
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Links ok
Plane 6: Plane enabled
Plane 7: Links ok
PFE #1
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Links ok
Plane 6: Plane enabled
Plane 7: Links ok
PFE #2
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Links ok
Plane 6: Plane enabled
Plane 7: Links ok
PFE #3
Plane 0: Links ok
380
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane
Plane
Plane
Plane
Plane
Plane
FPC 3
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 4
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
1:
2:
3:
4:
5:
6:
Links
Plane
Plane
Plane
Links
Plane
ok
enabled
enabled
enabled
ok
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Links
Links
Plane
Plane
Plane
Links
Plane
Links
ok
ok
enabled
enabled
enabled
ok
enabled
ok
0:
1:
2:
3:
4:
5:
6:
7:
Links ok
Links ok
Plane enabled
Plane enabled
Plane enabled
Unused
Plane enabled
Unused
0:
1:
2:
3:
4:
5:
6:
7:
Links ok
Links ok
Plane enabled
Plane enabled
Plane enabled
Unused
Plane enabled
Unused
show chassis fabric fpcs (MX960 Router with AS MLC Modular Carrier Card
In the following output, FPC 5 is the AS MLC modular carrier card (AS MCC).
user@host>show chassis fabric fpcs
Fabric management FPC state:
FPC 0
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
FPC 1
PFE #0
Plane 0: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
381
PTX Series Packet Transport Switch Software Documentation
Plane
Plane
Plane
Plane
Plane
FPC 4
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
FPC 5
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
FPC 8
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
382
1:
2:
3:
4:
5:
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
0: Plane enabled
1: Plane enabled
2: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
3: Plane enabled
4: Links ok
5: Links ok
0:
1:
2:
3:
4:
5:
Plane
Plane
Plane
Plane
Links
Links
enabled
enabled
enabled
enabled
ok
ok
show chassis fabric fpcs (MX2010 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC 0
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 1
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 2
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
383
PTX Series Packet Transport Switch Software Documentation
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 3
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #2
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #3
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 4
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 5
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
384
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 6
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #2
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #3
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 7
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane disabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
385
PTX Series Packet Transport Switch Software Documentation
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 8
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 9
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
disabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
disabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
disabled
enabled
enabled
enabled
enabled
show chassis fabric fpcs (MX2020 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC 0
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #2
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
386
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 1
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 2
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Copyright © 2013, Juniper Networks, Inc.
5: Plane enabled
6: Plane enabled
7: Plane enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0: Plane enabled
387
PTX Series Packet Transport Switch Software Documentation
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 3
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
388
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane 7: Plane enabled
FPC 4
...
show chassis fabric fpcs (MX2020 Router with MPC4E)
In the following output, FPC 14 is the MPC4E (MPC4E-3D-2CGE-8XGE) card.
user@host>show chassis fabric fpcs
Fabric management FPC state:
FPC 0
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 9
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 10
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Plane 6: Plane enabled
Plane 7: Plane enabled
FPC 14
PFE #0
Plane 0: Plane enabled
Copyright © 2013, Juniper Networks, Inc.
389
PTX Series Packet Transport Switch Software Documentation
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
FPC 19
PFE #0
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #1
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #2
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
PFE #3
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
0:
1:
2:
3:
4:
5:
6:
7:
Plane
Plane
Plane
Plane
Plane
Plane
Plane
Plane
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
show chassis fabric fpcs (T320 Router)
user@host> show chassis fabric fpcs
FPC #3
PFE #1
SIB #0
Links ok
390
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SIB #1
Plane enabled
SIB #2
Plane enabled
FPC #5
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
FPC #7
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
show chassis fabric fpcs (T640 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC #2
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
SIB #4
...
show chassis fabric fpcs (TX Matrix Router)
user@host> show chassis fabric fpcs
lcc0-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #0
PFE #1
SIB #0
Links ok
Copyright © 2013, Juniper Networks, Inc.
391
PTX Series Packet Transport Switch Software Documentation
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #2
PFE #1
SIB #0
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
SIB #4
...
FPC #4
PFE #0
SIB #4
PFE #1
SIB #4
FPC #5
PFE #1
SIB #4
FPC #6
PFE #1
SIB #4
Links ok
Links ok
Links ok
Links ok
lcc2-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #0
PFE #1
SIB #4 Links ok
FPC #1
PFE #1
SIB #4 Links ok
FPC #2
PFE #0
SIB #4 Links ok
PFE #1
SIB #4 Links ok
FPC #4
PFE #0
SIB #4 Links ok
PFE #1
SIB #4 Links ok
FPC #5
392
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PFE #1
SIB #4 Links ok
show chassis fabric fpcs (T1600 Router)
user@host> show chassis fabric fpcs
Fabric management FPC state:
FPC #0
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #1
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #2
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
Copyright © 2013, Juniper Networks, Inc.
393
PTX Series Packet Transport Switch Software Documentation
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #4
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
SIB #4
show chassis fabric fpcs (T4000 Core Router)
Fabric management
FPC #2
PFE #0
SIB #0
Links
SIB #1
Plane
SIB #2
Plane
SIB #3
Plane
SIB #4
Plane
FPC #3
PFE #0
SIB #0
Links
SIB #1
Plane
SIB #2
394
FPC state:
ok
enabled
enabled
enabled
enabled
ok
enabled
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #5
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
FPC #6
PFE #0
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
PFE #1
SIB #0
Links ok
SIB #1
Plane enabled
SIB #2
Plane enabled
SIB #3
Plane enabled
SIB #4
Plane enabled
show chassis fabric fpcs (TX Matrix Plus Router)
user@host> show chassis fabric fpcs
lcc0-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #0
PFE #1
SIB #0
Copyright © 2013, Juniper Networks, Inc.
395
PTX Series Packet Transport Switch Software Documentation
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #2
PFE #0
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
Destination error on PFEs
8
9
10
11
12
13
0
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
SIB #4
FPC #4
PFE #0
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Unused
SIB #1
Links ok
SIB #2
396
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #6
PFE #0
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #7
PFE #0
SIB #0
Unused
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
lcc1-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #2
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
Copyright © 2013, Juniper Networks, Inc.
397
PTX Series Packet Transport Switch Software Documentation
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #4
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Destination error on PFEs
93
1
8
9
29
40
65
72
73
104
SIB #4
Links ok
FPC #6
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #7
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
398
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Links ok
SIB #3
Links ok
SIB #4
Links ok
lcc2-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #0
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #2
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #4
PFE #0
SIB #0
Links ok
SIB #1
Links ok
Copyright © 2013, Juniper Networks, Inc.
399
PTX Series Packet Transport Switch Software Documentation
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #5
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #6
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #7
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
400
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Links ok
SIB #4
Links ok
lcc3-re0:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #0
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #2
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #4
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
Copyright © 2013, Juniper Networks, Inc.
401
PTX Series Packet Transport Switch Software Documentation
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #5
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
FPC #6
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
PFE #1
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
402
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FPC #7
PFE #0
SIB #0
Links ok
SIB #1
Links ok
SIB #2
Links ok
SIB #3
Links ok
SIB #4
Links ok
show chassis fabric fpcs lcc (TX Matrix Plus Router)
user@host> show chassis fabric fpcs lcc 0
lcc0-re1:
-------------------------------------------------------------------------Fabric management FPC state:
FPC #3
PFE #1
SIB #2
Plane enabled
SIB #3
Link error
Destination error on PFEs
0
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
SIB #4
Destination error on PFEs
0
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
FPC #4
PFE #0
SIB #0 Links ok
SIB #1 Links ok
SIB #2 Links ok
SIB #3 Links ok
SIB #4 Links ok
PFE #1
SIB #0 Links ok
SIB #1 Links ok
SIB #2 Links ok
SIB #3 Links ok
SIB #4 Links ok
FPC #6
PFE #0
SIB #0 Links ok
SIB #1 Links ok
SIB #2 Links ok
SIB #3 Links ok
SIB #4 Links ok
PFE #1
SIB #0 Links ok
SIB #1 Links ok
SIB #2 Links ok
SIB #3 Links ok
SIB #4 Links ok
FPC #7
PFE #0
SIB #0 Links ok
SIB #1 Links ok
SIB #2 Links ok
Copyright © 2013, Juniper Networks, Inc.
7
21
7
21
403
PTX Series Packet Transport Switch Software Documentation
SIB #3 Links ok
SIB #4 Links ok
show chassis fabric fpcs (EX8200 Switch)
user@host> show chassis fabric fpcs
Fabric management FPC state
FPC 6
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
Plane 8: Plane enabled
Plane 9: Plane enabled
Plane 10: Plane enabled
Plane 11: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
Plane 8: Plane enabled
Plane 9: Plane enabled
Plane 10: Plane enabled
Plane 11: Plane enabled
FPC 7
PFE #0
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
Plane 8: Plane enabled
Plane 9: Plane enabled
Plane 10: Plane enabled
Plane 11: Plane enabled
PFE #1
Plane 0: Plane enabled
Plane 1: Plane enabled
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Links ok
Plane 5: Links ok
Plane 6: Links ok
Plane 7: Links ok
Plane 8: Plane enabled
Plane 9: Plane enabled
404
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane 10: Plane enabled
Plane 11: Plane enabled
show chassis fabric fpcs (PTX Series Packet Transport Switches)
user@host> show chassis fabric fpcs slot 0
Fabric management FPC state:
FPC #0
PFE #0
SIB0_Fcore0 (plane 0)
Plane
SIB0_Fcore1 (plane 1)
Plane
SIB1_Fcore0 (plane 2)
Plane
SIB1_Fcore1 (plane 3)
Plane
SIB2_Fcore0 (plane 4)
Plane
SIB2_Fcore1 (plane 5)
Plane
SIB3_Fcore0 (plane 6)
Plane
SIB3_Fcore1 (plane 7)
Plane
SIB5_Fcore0 (plane 10)
Plane
SIB5_Fcore1 (plane 11)
Plane
SIB6_Fcore0 (plane 12)
Plane
SIB6_Fcore1 (plane 13)
Plane
SIB7_Fcore0 (plane 14)
Plane
SIB7_Fcore1 (plane 15)
Plane
SIB8_Fcore0 (plane 16)
Plane
SIB8_Fcore1 (plane 17)
Plane
Copyright © 2013, Juniper Networks, Inc.
Enabled, Links OK
Enabled, Links OK
Disabled, Links Down
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
Enabled, Links OK
405
PTX Series Packet Transport Switch Software Documentation
show chassis fabric plane-location
Syntax
show chassis fabric plane-location
Syntax (MX Series
Routers)
show chassis fabric plane-location
<all-members>
<local>
<member member-id>
Syntax (MX2010 3D
Universal Edge
Routers)
show chassis fabric plane-location
Syntax (MX2020 3D
Universal Edge
Routers)
show chassis fabric plane-location
Release Information
Command introduced in Junos OS Release 8.0.
Command introduced in Junos OS Release 9.4 for EX Series switches.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(M120, MX Series routers, and EX8200 switches only) Display the Control Board (CB)
location of each plane. This command can be used on the master Routing Engine or the
backup Routing Engine. For information about the meaning of “CBs” and “fabric plane”
on the switches, see EX Series Switches Hardware and CLI Terminology Mapping.
(TX Matrix Plus routers only) Display the SIB location of each fabric plane.
(PTX Series Packet Transport Switches only) Display the fabric plane location of each
SIB.
(MX2010 and MX2020 Routers only) Display the fabric plane location of each Switch
Fabric Board (SFB).
Options
all-members—(MX Series routers only) (Optional) Display the CB location of each fabric
plane on the Routing Engines in all member routers in the Virtual Chassis
configuration.
local—(MX Series routers only) (Optional) Display the CB location of each fabric plane
on the Routing Engines in the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display the CB location of each
fabric plane on the Routing Engines in the specified member in the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
Required Privilege
Level
List of Sample Output
406
view
show chassis fabric plane-location (M120 Router) on page 407
show chassis fabric plane-location (MX240 and MX480 Routers) on page 407
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fabric plane-location (MX960 Router) on page 408
show chassis fabric plane-location (MX2010 Router) on page 408
show chassis fabric plane-location (MX2020 Router) on page 408
show chassis fabric plane-location (TX Matrix Plus Router) on page 408
show chassis fabric plane-location (EX8200 Switch) on page 408
show chassis fabric plane-location (PTX Series Packet Transport Switches) on page 409
Output Fields
Table 28 on page 407 lists the output fields for the show chassis fabric plane-location
command. Output fields are listed in the approximate order in which they appear.
Table 28: show chassis fabric plane-location Output Fields
Field Name
Field Description
Plane n
Plane number.
(PTX Series Packet Transport Switches only) Plane numbers
associated with the SIB.
(MX2010 and MX2020 Routers only) Plane numbers associated
with the SFB.
Control Board n
Control board number.
SFC ABS-SIB-F13
(TX Matrix Plus routers only) Switch Interface Board (SIB) slot
number on the F13 SIB.
SFC ABS-SIB-F2S
(TX Matrix Plus routers only) SIB slot number on the F2S.
LCC ST-SIB-L
(TX Matrix Plus routers only) Line-card chassis (LCC) SIB slot
number.
SIB
(PTX Series Packet Transport Switches only) SIB number.
Switch Fabric Board n
(MX2010 and MX2020 Routers only) SFB number.
Sample Output
show chassis fabric plane-location (M120 Router)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Control Board 0
Plane 1
Control Board 0
Plane 2
Control Board 1
Plane 3
Control Board 1
show chassis fabric plane-location (MX240 and MX480 Routers)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Control Board 0
Plane 1
Control Board 0
Plane 2
Control Board 0
Plane 3
Control Board 0
Plane 4
Control Board 1
Copyright © 2013, Juniper Networks, Inc.
407
PTX Series Packet Transport Switch Software Documentation
Plane 5
Plane 6
Plane 7
Control Board 1
Control Board 1
Control Board 1
show chassis fabric plane-location (MX960 Router)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Control Board 0
Plane 1
Control Board 0
Plane 2
Control Board 1
Plane 3
Control Board 1
Plane 4
Control Board 2
Plane 5
Control Board 2
show chassis fabric plane-location (MX2010 Router)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Switch Fabric Board 0
Plane 1
Switch Fabric Board 1
Plane 2
Switch Fabric Board 2
Plane 3
Switch Fabric Board 3
Plane 4
Switch Fabric Board 4
Plane 5
Switch Fabric Board 5
Plane 6
Switch Fabric Board 6
Plane 7
Switch Fabric Board 7
show chassis fabric plane-location (MX2020 Router)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Switch Fabric Board 0
Plane 1
Switch Fabric Board 1
Plane 2
Switch Fabric Board 2
Plane 3
Switch Fabric Board 3
Plane 4
Switch Fabric Board 4
Plane 5
Switch Fabric Board 5
Plane 6
Switch Fabric Board 6
Plane 7
Switch Fabric Board 7
show chassis fabric plane-location (TX Matrix Plus Router)
user@host> show chassis fabric plane-location
Fabric Plane Locations :
Plane
SFC ABS-SIB-F13
SFC ABS-SIB-F2
0
0, 1
0/0, 0/2, 0/4, 0/6
1
3, 4
1/0, 1/2, 1/4, 1/6
2
6, 7
2/0, 2/2, 2/4, 2/6
3
8, 9
3/0, 3/2, 3/4, 3/6
4
11, 12
4/0, 4/2, 4/4, 4/6
LCC ST-SIB-L
0
1
2
3
4
show chassis fabric plane-location (EX8200 Switch)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------Plane 0
Control Board 0
Plane 1
Control Board 0
Plane 2
Control Board 0
Plane 3
Control Board 0
Plane 4
Control Board 1
Plane 5
Control Board 1
408
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Plane 6
Plane 7
Plane 8
Plane 9
Plane 10
Plane 11
Control
Control
Control
Control
Control
Control
Board
Board
Board
Board
Board
Board
1
1
2
2
2
2
show chassis fabric plane-location (PTX Series Packet Transport Switches)
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------SIB
Planes
0
0
1
1
2
3
2
4
5
3
6
7
4
8
9
5
10
11
6
12
13
7
14
15
8
16
17
Copyright © 2013, Juniper Networks, Inc.
409
PTX Series Packet Transport Switch Software Documentation
show chassis fabric summary
Syntax
show chassis fabric summary
Release Information
Command introduced in Junos OS Release 8.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Description
(MX Series routers and EX8200 switches only) Display the state of all fabric planes and
the elapsed uptime.
Options
Required Privilege
Level
List of Sample Output
Output Fields
This command has no options.
view
show chassis fabric summary (MX240 Router) on page 412
show chassis fabric summary (MX480 Router) on page 412
show chassis fabric summary (MX480 Router with MPC4E) on page 412
show chassis fabric summary (MX960 Router) on page 413
show chassis fabric summary (MX2010 Router) on page 413
show chassis fabric summary (MX2020 Router) on page 413
show chassis fabric summary (MX2020 Router with MPC4E) on page 413
show chassis fabric summary (EX8200 Switch) on page 413
show chassis fabric summary (PTX Series Packet Transport Switch) on page 414
Table 29 on page 410 lists the output fields for the show chassis fabric summary command.
Output fields are listed in the approximate order in which they appear.
Table 29: show chassis fabric summary Output Fields
410
Field Name
Field Description
Plane
(MX Series, MX2020 and MX2010 Routers only) Plane number.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 29: show chassis fabric summary Output Fields (continued)
Field Name
Field Description
State
(EX8200 Switches and PTX Series only) State of the SIB or FPC:
•
Online—(PTX Series) Switch Interface Board (SIB) is operational
and running.
NOTE: On an Enhanced SCB in MX Series routers with MPCs, a
maximum of 4 planes are operational and running. On all the other
SCBs in MX Series routers with MPCs, all the planes are operational
and running.
•
Empty—SIB is powered down.
•
Check—SIB is in the Check state because of the following reasons:
•
SIB is not inserted properly.
•
Some destination errors are detected on the SIB. In this case,
the Packet Forwarding Engine stops using the SIB to send
traffic to the affected destination Packet Forwarding Engine.
•
Some link errors are detected on the channel between the SIB
and a Packet Forwarding Engine. Link errors can be detected
at initialization time or runtime:
• Link errors caused by a link training failure at initialization
time—The Packet Forwarding Engine does not use the SIB
to send traffic. The show chassis fabric fpcs command shows
Plane disabled as status for this link.
•
Link errors caused by CRC errors detected at runtime—The
Packet Forwarding Engine continues to use the SIB to send
traffic. The show chassis fabric fpcs command shows Link
error as the status for this link.
NOTE: The Check state does not apply to PTX Series Packet
Transport Switches because there are no SIBs in the Check state.
For information about link and destination errors, issue the show
chassis fabric fpcs commands.
•
Spare—SIB is redundant and will move to active state if one of
the working SIBs fails.
NOTE: Spare does not apply to PTX Series Packet Transport
Switches because there are no spare SIBs in the device.
(MX Series) State of the Switch Control Board (SCB):
•
Online—SCB is operational and running.
•
Offline—SCB is powered down.
•
Spare—SCB is redundant and moves to active state if one of the
operational SCBs fail.
•
Check—SCB is in the check state.
(MX2010 and MX2020 Routers) State of the Switch fabric Board
(SFB):
Copyright © 2013, Juniper Networks, Inc.
•
Online—SFB is operational and running.
•
Offline—SFB is powered down.
•
Check—SFB is in the check state.
411
PTX Series Packet Transport Switch Software Documentation
Table 29: show chassis fabric summary Output Fields (continued)
Field Name
Field Description
Errors
(PTX Series only) Indicates whether there is any error on the SIB.
•
None—No errors
•
Link Errors—Fabric link errors were found on the SIB RX link.
•
Cell drops—Fabric cell drops were found on the SIB ASIC.
•
Link, Cell drops—Both Link errors and cell drops were detected
on at least one of the FPC’s fabric links.
NOTE: The Errors column is empty only when the FPC or SIB is
offline.
Uptime
(MX Series, MX2010 and MX2020 Routers) Elapsed time the plane
has been online.
Sample Output
show chassis fabric summary (MX240 Router)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
23 hours, 26 minutes,
1
Online
23 hours, 26 minutes,
2
Check
18 hours, 33 minutes,
3
Online
23 hours, 26 minutes,
4
Spare
23 hours, 26 minutes,
5
Spare
23 hours, 26 minutes,
6
Spare
23 hours, 26 minutes,
7
Spare
23 hours, 26 minutes,
54
54
42
54
54
54
54
54
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
show chassis fabric summary (MX480 Router)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
8 hours, 45 minutes,
1
Online
8 hours, 45 minutes,
2
Online
8 hours, 45 minutes,
3
Online
8 hours, 45 minutes,
4
Spare
8 hours, 45 minutes,
5
Spare
8 hours, 45 minutes,
6
Spare
8 hours, 45 minutes,
7
Check
6 hours, 10 minutes,
29
28
28
28
28
28
28
12
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
show chassis fabric summary (MX480 Router with MPC4E)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
2 hours, 16 minutes,
1
Online
2 hours, 15 minutes,
2
Online
2 hours, 16 minutes
3
Online
2 hours, 15 minutes,
4
Online
2 hours, 15 minutes,
5
Spare
2 hours, 14 minutes,
6
Online
2 hours, 14 minutes,
412
11 seconds
45 seconds
30 seconds
1 second
40 seconds
24 seconds
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
7
Spare
2 hours, 14 minutes, 4 seconds
Note:
For FPC slots with MPC Type 4 or MCC:
Fabric planes 1 and 5, 3 and 7 use shared physical links.
Those slots may run in a reduced bandwidth in case both
plane 1 and 5, or both 3 and 7 are active.
show chassis fabric summary (MX960 Router)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
3 hours, 7 minutes,
1
Online
3 hours, 7 minutes,
2
Online
3 hours, 6 minutes,
3
Online
3 hours, 6 minutes,
4
Empty
5
Empty
9 seconds
4 seconds
59 seconds
54 seconds
show chassis fabric summary (MX2010 Router)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
1 day, 13 hours, 20
1
Online
1 day, 13 hours, 19
2
Online
1 day, 13 hours, 19
3
Offline
4
Online
1 day, 13 hours, 19
5
Check
1 day, 13 hours, 19
6
Online
1 day, 13 hours, 19
7
Online
1 hour, 43 minutes,
minutes, 10 seconds
minutes, 59 seconds
minutes, 49 seconds
minutes, 28 seconds
minutes, 17 seconds
minutes, 6 seconds
5 seconds
show chassis fabric summary (MX2020 Router)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
8 hours, 24 minutes,
1
Online
8 hours, 47 minutes,
2
Online
8 hours, 47 minutes,
3
Online
8 hours, 47 minutes,
4
Online
8 hours, 47 minutes,
5
Online
8 hours, 47 minutes,
6
Online
8 hours, 47 minutes,
7
Online
8 hours, 46 minutes,
1 second
54 seconds
44 seconds
33 seconds
22 seconds
12 seconds
1 second
50 seconds
show chassis fabric summary (MX2020 Router with MPC4E)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
20 hours, 48 minutes,
1
Online
20 hours, 48 minutes,
2
Online
20 hours, 48 minutes,
3
Online
20 hours, 48 minutes,
4
Online
20 hours, 48 minutes,
5
Online
20 hours, 48 minutes,
6
Online
20 hours, 48 minutes,
7
Online
20 hours, 48 minutes,
28
28
28
28
28
28
28
28
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
show chassis fabric summary (EX8200 Switch)
user@host> show chassis fabric summary
Plane
State
Uptime
0
Online
12 days, 50 minutes, 54 seconds
Copyright © 2013, Juniper Networks, Inc.
413
PTX Series Packet Transport Switch Software Documentation
1
2
3
4
5
6
7
8
9
10
11
Online
Online
Online
Spare
Spare
Spare
Spare
Online
Online
Online
Online
12
12
12
12
12
12
12
12
12
12
12
days,
days,
days,
days,
days,
days,
days,
days,
days,
days,
days,
50
50
50
50
50
50
50
50
50
50
50
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
minutes,
53
53
52
49
47
47
46
52
50
50
49
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
seconds
show chassis fabric summary (PTX Series Packet Transport Switch)
user@host> show chassis fabric summary
FRU
State
Errors
414
SIB0
SIB1
SIB2
SIB3
SIB4
SIB5
SIB6
SIB7
SIB8
Online
Online
Online
Online
Offline
Online
Online
Online
Online
None
Link Errors
None
Cell drops
FPC0
FPC1
FPC2
FPC3
FPC4
FPC5
FPC6
FPC7
Online
Online
Online
Offline
Online
Online
Empty
Empty
None
Link Errors
None
None
Link, Cell drops
None
Link, Cell drops
None
None
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fabric topology
Syntax
show chassis fabric topology
<lcc number | scc>
<sib-slot>
Syntax (TX Matrix
Router)
show chassis fabric topology
<lcc number | scc>
<sib-slot>
Syntax (TX Matrix Plus
Router)
show chassis fabric topology
<lcc number | sfc number>
<sib-slot>
Syntax (T4000 Core
Router)
show chassis fabric topology
<sib-slot>
Syntax (PTX Series
Packet Transport
Switches)
show chassis fabric topology
Release Information
Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Description
(TX Matrix routers only) Display the state of the switching fabric topology for the Switch
Interface Board (SIB) connection between the TX Matrix router and the T640 routers.
(TX Matrix Plus routers only) Display the state of the switching fabric topology for the
SIB connection between the TX Matrix Plus router and the T1600 routers.
(T320, T640, T1600, and T4000 routers only) Display the state of the switching fabric
topology for the connection between the Switch Interface Board (SIB) and the FPCs.
(PTX Series Packet Transport Switches only) Display the input-output link topology.
Options
none—(TX Matrix routers only) Display the state of the switching fabric topology for the
Switch Interface Board (SIB) connection between the TX Matrix router and the T640
routers.
(TX Matrix Plus routers only) Display the state of the switching fabric topology for
the SIB connection between the TX Matrix Plus router and the T1600 routers.
(T320, T640, T1600, and T4000 routers only) Display the state of the switching
fabric topology for the connection between the Switch Interface Board (SIB) and
the FPCs.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display the fabric topology state for a specified T640 router (or line-card chassis)
that is connected to a TX Matrix router. On a TX Matrix Plus router, display the fabric
topology state for a specified T1600 router (or line-card chassis) that is connected
to the TX Matrix Plus router. Replace number with a value from 0 through 3.
Copyright © 2013, Juniper Networks, Inc.
415
PTX Series Packet Transport Switch Software Documentation
scc—(TX Matrix routers only) (Optional) Display the fabric topology state for the TX
Matrix router (or switch-card chassis).
sfc number—(TX Matrix Plus routers only) (Optional) Display the fabric topology for the
TX Matrix Plus router (or switch-fabric chassis). Replace number with 0.
sib-slot—(Optional) Display the fabric topology state for a specified SIB slot. Replace
sib-slot with a value from 0 through 4. On a TX Matrix Plus router, replace sib-slot
with a value from 0 through 15.
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
view
•
Layer 2 Wholesale Network Topology Overview
show chassis fabric topology scc (TX Matrix Router) on page 419
show chassis fabric topology lcc on page 421
show chassis fabric topology (TX Matrix Plus Router) on page 423
show chassis fabric topology sfc (TX Matrix Plus Router) on page 424
show chassis fabric topology lcc (TX Matrix Plus Router) on page 425
show chassis fabric topology (T4000 Core Router) on page 426
show chassis fabric topology (PTX Series Packet Transport Switches) on page 427
Table 30 on page 416 lists the output fields for the show chassis fabric topology command.
Output fields are listed in the approximate order in which they appear.
Table 30: show chassis fabric topology Output Fields
416
Field
Name
Field Description
in-links
Fabric topology for receive side links.
out-links
Fabric topology for transmit side links.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 30: show chassis fabric topology Output Fields (continued)
Field
Name
Field Description
state
State of the fabric link:
•
RESET—Link between the SIB and the FPC/DPC is powered down on purpose.
This is done in all non-dual Packet Forwarding Engine–based boards.
•
UP—Link between the SIB and the FPC/DCP is up and running.
•
DOWN—Link between the SIB and the FPC/DCP is powered down.
•
FAULT—The SIB is in the alarmed state, in which the SIB’s plane is not operational
for one or more of the following reasons:
•
On-board F-chip is not operational.
•
Fiber-optic connector faults.
•
FPC connector faults.
•
SIB midplane connector faults.
NOTE: The following state descriptions are applicable only to PTX Series Packet
Transport Switches.
•
OK—The link between the SIB and the FPC is operational.
•
Down—The link between the SIB and the FPC is powered down.
•
Error—The CCL link between the SIB and FPC is not operational for one or more
of the following reasons:
Copyright © 2013, Juniper Networks, Inc.
•
FPC midplane connector failure.
•
SIB midplane connector failure.
•
CCL link CRC error.
417
PTX Series Packet Transport Switch Software Documentation
Table 30: show chassis fabric topology Output Fields (continued)
Out-Links:
and
In-Links
(TX
Matrix
Plus
router
only)
State of the links from the F13 SIB to the LCC or vice-versa. Out-Links indicate Tx
links. In-Links indicate an Rx link. The following additional fields are displayed for
each SIB:
•
VCSEL Status—Optical (VCSEL channel) link status for the corresponding electrical
(HSL2) link. The states include:
•
OK—Optical signal power is good.
•
Error—Internal error.
•
LOS—Loss of Signal detected.
•
High Cur—The Tx Bias-current is higher than threshold on this channel. This is
applicable only to Tx Channels.
•
Low Cur —The Tx Bias-current is lower than threshold on this channel. This is
applicable only to Tx Channels.
•
HSL2 Channel—HSL2 is the electrical link used to connect ASICs to the in-link and
out-link. The channel number corresponds to the link and varies based on the
ASIC or configuration.
•
HSL2 Status —The status of the HSL2 Channel. Includes the following states:
•
Up—Channel is up.
•
Down—Channel is down.
•
Reset—Channel has been reset.
•
Fault—Channel has faults.
The following is a sample output with description of the fields displayed in the output
for Out-Links:
Out-Links:
=========
SF_30_13_FB_A(21,09) -> FPC7_B_SG(3,3,6)_FB_A(18,09)
203
Up
418
OK
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 30: show chassis fabric topology Output Fields (continued)
•
SF_30_13—Name of the ASIC, with Fabric F1 or F3 mode. In this case, 3 is the F3
direction and is used in the Tx path and 0 identifies the serial link on the SF chip
(in this case, link goes to sf-3 chip number 0). You can also have F1 mode and Rx
path instead.
•
FB_A (21, 09)—Fiber bundle A, with VCSEL unit number 21 within the SIB, and
channel number 9 within the unit number.
•
FPC7_B_SG(3,3,6—FPC 7.with bottom Packet Forwarding Engine (T for top PFE
and B for bottom PFE), SG ASIC, with number 3 and port number 3, with HSL2
link number with the SIB as 6.
•
FB_A(18, 09)—Fiber Bundle, with VCSEL unit number 18 within the SIB, and VCSEL
channel number 9 within the unit number.
The following is a sample output with description of the fields displayed in the output
for In-Links:
In-Links:
=========
FPC0_T_SG(0,0,0)_FB_D(04,11)
0
Up
-> SF_10_00_FB_D(01,11)
OK
•
FPC0—FPC 0.
•
T—Top Packet Forwarding Engine.
•
SG (0, 0, 0)—SG ASIC with port number 0 and link 0.
•
FB_D (04,11)—Fiber Bundle D with VCSEL 4, channel 11.
•
SF_10—Indicates F1 mode chip number 0 and Rx path.
•
SF_10_00_FB_D(01,11) —Indicates F1 mode chip number 0 and Rx path with port
0, fiber bundle D, with VCSEL 1, channel 11.
Sample Output
show chassis fabric topology scc (TX Matrix Router)
user@host> show chassis fabric topology scc
scc-re1:
-------------------------------------------------------------------------------fchip (mode)
in-links
state
out-links
state
-------------------------------------------------------------------------------Sib #0 :
--------SIB0_F0 (F2 ):
LCC0_SIB-L0_F0,03->SIB-S0_F0,00
LCC1_SIB-L0_F0,03->SIB-S0_F0,01
LCC2_SIB-L0_F0,03->SIB-S0_F0,02
LCC3_SIB-L0_F0,03->SIB-S0_F0,03
LCC0_SIB-L0_F0,02->SIB-S0_F0,04
LCC1_SIB-L0_F0,02->SIB-S0_F0,05
LCC2_SIB-L0_F0,02->SIB-S0_F0,06
LCC3_SIB-L0_F0,02->SIB-S0_F0,07
LCC0_SIB-L0_F0,07->SIB-S0_F0,08
LCC1_SIB-L0_F0,07->SIB-S0_F0,09
LCC2_SIB-L0_F0,07->SIB-S0_F0,10
LCC3_SIB-L0_F0,07->SIB-S0_F0,11
LCC0_SIB-L0_F0,06->SIB-S0_F0,12
Copyright © 2013, Juniper Networks, Inc.
UP
UP
RESET
RESET
UP
UP
RESET
RESET
UP
UP
RESET
RESET
UP
SIB-S0_F0,00->LCC0_SIB-L0_F1,00
SIB-S0_F0,01->LCC1_SIB-L0_F1,08
SIB-S0_F0,02->LCC2_SIB-L0_F1,08
SIB-S0_F0,03->LCC3_SIB-L0_F1,00
SIB-S0_F0,04->LCC0_SIB-L0_F1,01
SIB-S0_F0,05->LCC1_SIB-L0_F1,09
SIB-S0_F0,06->LCC2_SIB-L0_F1,09
SIB-S0_F0,07->LCC3_SIB-L0_F1,01
SIB-S0_F0,08->LCC0_SIB-L0_F1,04
SIB-S0_F0,09->LCC1_SIB-L0_F1,12
SIB-S0_F0,10->LCC2_SIB-L0_F1,12
SIB-S0_F0,11->LCC3_SIB-L0_F1,04
SIB-S0_F0,12->LCC0_SIB-L0_F1,05
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
419
PTX Series Packet Transport Switch Software Documentation
LCC1_SIB-L0_F0,06->SIB-S0_F0,13
LCC2_SIB-L0_F0,06->SIB-S0_F0,14
LCC3_SIB-L0_F0,06->SIB-S0_F0,15
SIB0_F1 (F2 ):
LCC0_SIB-L0_F0,11->SIB-S0_F1,00
LCC1_SIB-L0_F0,11->SIB-S0_F1,01
LCC2_SIB-L0_F0,11->SIB-S0_F1,02
LCC3_SIB-L0_F0,11->SIB-S0_F1,03
LCC0_SIB-L0_F0,10->SIB-S0_F1,04
LCC1_SIB-L0_F0,10->SIB-S0_F1,05
LCC2_SIB-L0_F0,10->SIB-S0_F1,06
LCC3_SIB-L0_F0,10->SIB-S0_F1,07
LCC0_SIB-L0_F0,15->SIB-S0_F1,08
LCC1_SIB-L0_F0,15->SIB-S0_F1,09
LCC2_SIB-L0_F0,15->SIB-S0_F1,10
LCC3_SIB-L0_F0,15->SIB-S0_F1,11
LCC0_SIB-L0_F0,14->SIB-S0_F1,12
LCC1_SIB-L0_F0,14->SIB-S0_F1,13
LCC2_SIB-L0_F0,14->SIB-S0_F1,14
UP
LCC3_SIB-L0_F0,14->SIB-S0_F1,15
UP
SIB0_F2 (F2 ):
LCC3_SIB-L0_F0,13->SIB-S0_F2,00
LCC2_SIB-L0_F0,13->SIB-S0_F2,01
UP
LCC1_SIB-L0_F0,13->SIB-S0_F2,02
LCC0_SIB-L0_F0,13->SIB-S0_F2,03
LCC3_SIB-L0_F0,12->SIB-S0_F2,04
UP
LCC2_SIB-L0_F0,12->SIB-S0_F2,05
LCC1_SIB-L0_F0,12->SIB-S0_F2,06
LCC0_SIB-L0_F0,12->SIB-S0_F2,07
LCC3_SIB-L0_F0,09->SIB-S0_F2,08
UP
LCC2_SIB-L0_F0,09->SIB-S0_F2,09
UP
LCC1_SIB-L0_F0,09->SIB-S0_F2,10
LCC0_SIB-L0_F0,09->SIB-S0_F2,11
LCC3_SIB-L0_F0,08->SIB-S0_F2,12
UP
LCC2_SIB-L0_F0,08->SIB-S0_F2,13
UP
LCC1_SIB-L0_F0,08->SIB-S0_F2,14
LCC0_SIB-L0_F0,08->SIB-S0_F2,15
SIB0_F3 (F2 ):
LCC3_SIB-L0_F0,05->SIB-S0_F3,00
UP
LCC2_SIB-L0_F0,05->SIB-S0_F3,01
UP
LCC1_SIB-L0_F0,05->SIB-S0_F3,02
LCC0_SIB-L0_F0,05->SIB-S0_F3,03
LCC3_SIB-L0_F0,04->SIB-S0_F3,04
UP
LCC2_SIB-L0_F0,04->SIB-S0_F3,05
UP
LCC1_SIB-L0_F0,04->SIB-S0_F3,06
LCC0_SIB-L0_F0,04->SIB-S0_F3,07
LCC3_SIB-L0_F0,01->SIB-S0_F3,08
UP
LCC2_SIB-L0_F0,01->SIB-S0_F3,09
420
UP
RESET
RESET
SIB-S0_F0,13->LCC1_SIB-L0_F1,13 UP
SIB-S0_F0,14->LCC2_SIB-L0_F1,13 UP
SIB-S0_F0,15->LCC3_SIB-L0_F1,05 UP
UP
UP
RESET
RESET
UP
UP
RESET
RESET
UP
UP
RESET
RESET
UP
UP
RESET
SIB-S0_F1,00->LCC0_SIB-L0_F1,08 UP
SIB-S0_F1,01->LCC1_SIB-L0_F1,00 UP
SIB-S0_F1,02->LCC2_SIB-L0_F1,00 UP
SIB-S0_F1,03->LCC3_SIB-L0_F1,08 UP
SIB-S0_F1,04->LCC0_SIB-L0_F1,09 UP
SIB-S0_F1,05->LCC1_SIB-L0_F1,01 UP
SIB-S0_F1,06->LCC2_SIB-L0_F1,01 UP
SIB-S0_F1,07->LCC3_SIB-L0_F1,09 UP
SIB-S0_F1,08->LCC0_SIB-L0_F1,12 UP
SIB-S0_F1,09->LCC1_SIB-L0_F1,04 UP
SIB-S0_F1,10->LCC2_SIB-L0_F1,04 UP
SIB-S0_F1,11->LCC3_SIB-L0_F1,12 UP
SIB-S0_F1,12->LCC0_SIB-L0_F1,13 UP
SIB-S0_F1,13->LCC1_SIB-L0_F1,05 UP
SIB-S0_F1,14->LCC2_SIB-L0_F1,05
RESET
SIB-S0_F1,15->LCC3_SIB-L0_F1,13
RESET
RESET
SIB-S0_F2,00->LCC3_SIB-L0_F1,14 UP
SIB-S0_F2,01->LCC2_SIB-L0_F1,06
UP
UP
RESET
SIB-S0_F2,02->LCC1_SIB-L0_F1,06 UP
SIB-S0_F2,03->LCC0_SIB-L0_F1,14 UP
SIB-S0_F2,04->LCC3_SIB-L0_F1,15
RESET
UP
UP
RESET
SIB-S0_F2,05->LCC2_SIB-L0_F1,07 UP
SIB-S0_F2,06->LCC1_SIB-L0_F1,07 UP
SIB-S0_F2,07->LCC0_SIB-L0_F1,15 UP
SIB-S0_F2,08->LCC3_SIB-L0_F1,10
RESET
SIB-S0_F2,09->LCC2_SIB-L0_F1,02
UP
UP
RESET
SIB-S0_F2,10->LCC1_SIB-L0_F1,02 UP
SIB-S0_F2,11->LCC0_SIB-L0_F1,10 UP
SIB-S0_F2,12->LCC3_SIB-L0_F1,11
RESET
SIB-S0_F2,13->LCC2_SIB-L0_F1,03
UP
UP
SIB-S0_F2,14->LCC1_SIB-L0_F1,03
SIB-S0_F2,15->LCC0_SIB-L0_F1,11
UP
UP
RESET
SIB-S0_F3,00->LCC3_SIB-L0_F1,06
RESET
SIB-S0_F3,01->LCC2_SIB-L0_F1,14
UP
UP
RESET
SIB-S0_F3,02->LCC1_SIB-L0_F1,14 UP
SIB-S0_F3,03->LCC0_SIB-L0_F1,06 UP
SIB-S0_F3,04->LCC3_SIB-L0_F1,07
RESET
SIB-S0_F3,05->LCC2_SIB-L0_F1,15
UP
UP
RESET
SIB-S0_F3,06->LCC1_SIB-L0_F1,15 UP
SIB-S0_F3,07->LCC0_SIB-L0_F1,07 UP
SIB-S0_F3,08->LCC3_SIB-L0_F1,02
RESET
SIB-S0_F3,09->LCC2_SIB-L0_F1,10
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
UP
LCC1_SIB-L0_F0,01->SIB-S0_F3,10
LCC0_SIB-L0_F0,01->SIB-S0_F3,11
LCC3_SIB-L0_F0,00->SIB-S0_F3,12
UP
LCC2_SIB-L0_F0,00->SIB-S0_F3,13
UP
LCC1_SIB-L0_F0,00->SIB-S0_F3,14
LCC0_SIB-L0_F0,00->SIB-S0_F3,15
Sib #1 :
--------SIB1_F0 (F2 ):
LCC0_SIB-L1_F0,03->SIB-S1_F0,00
LCC1_SIB-L1_F0,03->SIB-S1_F0,01
LCC2_SIB-L1_F0,03->SIB-S1_F0,02
LCC3_SIB-L1_F0,03->SIB-S1_F0,03
LCC0_SIB-L1_F0,02->SIB-S1_F0,04
LCC1_SIB-L1_F0,02->SIB-S1_F0,05
LCC2_SIB-L1_F0,02->SIB-S1_F0,06
LCC3_SIB-L1_F0,02->SIB-S1_F0,07
LCC0_SIB-L1_F0,07->SIB-S1_F0,08
LCC1_SIB-L1_F0,07->SIB-S1_F0,09
LCC2_SIB-L1_F0,07->SIB-S1_F0,10
LCC3_SIB-L1_F0,07->SIB-S1_F0,11
LCC0_SIB-L1_F0,06->SIB-S1_F0,12
LCC1_SIB-L1_F0,06->SIB-S1_F0,13
LCC2_SIB-L1_F0,06->SIB-S1_F0,14
LCC3_SIB-L1_F0,06->SIB-S1_F0,15
SIB1_F1 (F2 ):
LCC0_SIB-L1_F0,11->SIB-S1_F1,00
LCC1_SIB-L1_F0,11->SIB-S1_F1,01
LCC2_SIB-L1_F0,11->SIB-S1_F1,02
LCC3_SIB-L1_F0,11->SIB-S1_F1,03
LCC0_SIB-L1_F0,10->SIB-S1_F1,04
LCC1_SIB-L1_F0,10->SIB-S1_F1,05
LCC2_SIB-L1_F0,10->SIB-S1_F1,06
LCC3_SIB-L1_F0,10->SIB-S1_F1,07
LCC0_SIB-L1_F0,15->SIB-S1_F1,08
LCC1_SIB-L1_F0,15->SIB-S1_F1,09
LCC2_SIB-L1_F0,15->SIB-S1_F1,10
LCC3_SIB-L1_F0,15->SIB-S1_F1,11
LCC0_SIB-L1_F0,14->SIB-S1_F1,12
LCC1_SIB-L1_F0,14->SIB-S1_F1,13
LCC2_SIB-L1_F0,14->SIB-S1_F1,14
UP
UP
RESET
SIB-S0_F3,10->LCC1_SIB-L0_F1,10 UP
SIB-S0_F3,11->LCC0_SIB-L0_F1,02 UP
SIB-S0_F3,12->LCC3_SIB-L0_F1,03
RESET
SIB-S0_F3,13->LCC2_SIB-L0_F1,11
UP
UP
SIB-S0_F3,14->LCC1_SIB-L0_F1,11
SIB-S0_F3,15->LCC0_SIB-L0_F1,03
UP
UP
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
SIB-S1_F0,00->LCC0_SIB-L1_F1,00
SIB-S1_F0,01->LCC1_SIB-L1_F1,08
SIB-S1_F0,02->LCC2_SIB-L1_F1,08
SIB-S1_F0,03->LCC3_SIB-L1_F1,00
SIB-S1_F0,04->LCC0_SIB-L1_F1,01
SIB-S1_F0,05->LCC1_SIB-L1_F1,09
SIB-S1_F0,06->LCC2_SIB-L1_F1,09
SIB-S1_F0,07->LCC3_SIB-L1_F1,01
SIB-S1_F0,08->LCC0_SIB-L1_F1,04
SIB-S1_F0,09->LCC1_SIB-L1_F1,12
SIB-S1_F0,10->LCC2_SIB-L1_F1,12
SIB-S1_F0,11->LCC3_SIB-L1_F1,04
SIB-S1_F0,12->LCC0_SIB-L1_F1,05
SIB-S1_F0,13->LCC1_SIB-L1_F1,13
SIB-S1_F0,14->LCC2_SIB-L1_F1,13
SIB-S1_F0,15->LCC3_SIB-L1_F1,05
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
SIB-S1_F1,00->LCC0_SIB-L1_F1,08
SIB-S1_F1,01->LCC1_SIB-L1_F1,00
SIB-S1_F1,02->LCC2_SIB-L1_F1,00
SIB-S1_F1,03->LCC3_SIB-L1_F1,08
SIB-S1_F1,04->LCC0_SIB-L1_F1,09
SIB-S1_F1,05->LCC1_SIB-L1_F1,01
SIB-S1_F1,06->LCC2_SIB-L1_F1,01
SIB-S1_F1,07->LCC3_SIB-L1_F1,09
SIB-S1_F1,08->LCC0_SIB-L1_F1,12
SIB-S1_F1,09->LCC1_SIB-L1_F1,04
SIB-S1_F1,10->LCC2_SIB-L1_F1,04
-S1_F1,11->LCC3_SIB-L1_F1,12,05
SIB-S1_F1,12->LCC0_SIB-L1_F1,13
SIB-S1_F1,13->LCC1_SIB-L1_F1,05
SIB-S1_F1,14->LCC2_SIB-L1_F1,05
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
show chassis fabric topology lcc
user@host> show chassis fabric topology lcc 0
lcc0-re0:
-------------------------------------------------------------------------fchip (mode)
in-links
state
out-links
state
------------------------------------------------------------------Sib #2 :
--------SIB2_F0 (F1 ):
FPC0_T->SIB-L2_F0,00
DOWN
SIB-L2_F0,00->SIB-S2_F3,15 DOWN
FPC0_B->SIB-L2_F0,01
UP
SIB-L2_F0,01->SIB-S2_F3,11 DOWN
FPC1_T->SIB-L2_F0,02
DOWN
SIB-L2_F0,02->SIB-S2_F0,04 DOWN
FPC1_B->SIB-L2_F0,03
DOWN
SIB-L2_F0,03->SIB-S2_F0,00 DOWN
FPC2_T->SIB-L2_F0,04
DOWN
SIB-L2_F0,04->SIB-S2_F3,07 DOWN
Copyright © 2013, Juniper Networks, Inc.
421
PTX Series Packet Transport Switch Software Documentation
FPC2_B->SIB-L2_F0,05
DOWN
FPC3_T->SIB-L2_F0,06
DOWN
FPC3_B->SIB-L2_F0,07
DOWN
FPC4_T->SIB-L2_F0,08
DOWN
FPC4_B->SIB-L2_F0,09
DOWN
FPC5_T->SIB-L2_F0,10
DOWN
FPC5_B->SIB-L2_F0,11
DOWN
FPC6_T->SIB-L2_F0,12
DOWN
FPC6_B->SIB-L2_F0,13
UP
FPC7_T->SIB-L2_F0,14
DOWN
FPC7_B->SIB-L2_F0,15
DOWN
SIB2_F1 (F3 ):
SIB-S2_F0,00->SIB-L2_F1,00 UP
SIB-S2_F0,04->SIB-L2_F1,01 UP
SIB-S2_F3,11->SIB-L2_F1,02 UP
SIB-S2_F3,15->SIB-L2_F1,03 UP
SIB-S2_F0,08->SIB-L2_F1,04 UP
SIB-S2_F0,12->SIB-L2_F1,05 UP
SIB-S2_F3,03->SIB-L2_F1,06 UP
SIB-S2_F3,07->SIB-L2_F1,07 UP
SIB-S2_F1,00->SIB-L2_F1,08 UP
SIB-S2_F1,04->SIB-L2_F1,09 UP
SIB-S2_F2,11->SIB-L2_F1,10 UP
SIB-S2_F2,15->SIB-L2_F1,11 UP
SIB-S2_F1,08->SIB-L2_F1,12 UP
SIB-S2_F1,12->SIB-L2_F1,13 UP
SIB-S2_F2,03->SIB-L2_F1,14 UP
SIB-S2_F2,07->SIB-L2_F1,15 UP
Sib #4 :
--------SIB4_F0 (F1 ):
FPC0_T->SIB-L4_F0,00
RESET
FPC0_B->SIB-L4_F0,01
UP
FPC1_T->SIB-L4_F0,02
RESET
FPC1_B->SIB-L4_F0,03
RESET
FPC2_T->SIB-L4_F0,04
RESET
FPC2_B->SIB-L4_F0,05
RESET
FPC3_T->SIB-L4_F0,06
RESET
FPC3_B->SIB-L4_F0,07
RESET
FPC4_T->SIB-L4_F0,08
RESET
FPC4_B->SIB-L4_F0,09
RESET
FPC5_T->SIB-L4_F0,10
RESET
FPC5_B->SIB-L4_F0,11
RESET
FPC6_T->SIB-L4_F0,12
RESET
FPC6_B->SIB-L4_F0,13
UP
FPC7_T->SIB-L4_F0,14
RESET
FPC7_B->SIB-L4_F0,15
RESET
SIB4_F1 (F3 ):
SIB-S4_F0,00->SIB-L4_F1,00 UP
SIB-S4_F0,04->SIB-L4_F1,01 UP
SIB-S4_F3,11->SIB-L4_F1,02 UP
SIB-S4_F3,15->SIB-L4_F1,03 UP
SIB-S4_F0,08->SIB-L4_F1,04 UP
SIB-S4_F0,12->SIB-L4_F1,05 UP
SIB-S4_F3,03->SIB-L4_F1,06 UP
SIB-S4_F3,07->SIB-L4_F1,07 UP
SIB-S4_F1,00->SIB-L4_F1,08 UP
SIB-S4_F1,04->SIB-L4_F1,09 UP
SIB-S4_F2,11->SIB-L4_F1,10 UP
SIB-S4_F2,15->SIB-L4_F1,11 UP
SIB-S4_F1,08->SIB-L4_F1,12 UP
422
SIB-L2_F0,05->SIB-S2_F3,03
SIB-L2_F0,06->SIB-S2_F0,12
SIB-L2_F0,07->SIB-S2_F0,08
SIB-L2_F0,08->SIB-S2_F2,15
SIB-L2_F0,09->SIB-S2_F2,11
SIB-L2_F0,10->SIB-S2_F1,04
SIB-L2_F0,11->SIB-S2_F1,00
SIB-L2_F0,12->SIB-S2_F2,07
SIB-L2_F0,13->SIB-S2_F2,03
SIB-L2_F0,14->SIB-S2_F1,12
SIB-L2_F0,15->SIB-S2_F1,08
SIB-L2_F1,00->FPC7_B
SIB-L2_F1,01->FPC7_T
SIB-L2_F1,02->FPC6_B
SIB-L2_F1,03->FPC6_T
SIB-L2_F1,04->FPC5_B
SIB-L2_F1,05->FPC5_T
SIB-L2_F1,06->FPC4_B
SIB-L2_F1,07->FPC4_T
SIB-L2_F1,08->FPC3_B
SIB-L2_F1,09->FPC3_T
SIB-L2_F1,10->FPC2_B
SIB-L2_F1,11->FPC2_T
SIB-L2_F1,12->FPC1_B
SIB-L2_F1,13->FPC1_T
SIB-L2_F1,14->FPC0_B
SIB-L2_F1,15->FPC0_T
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
SIB-L4_F0,00->SIB-S4_F3,15
SIB-L4_F0,01->SIB-S4_F3,11
SIB-L4_F0,02->SIB-S4_F0,04
SIB-L4_F0,03->SIB-S4_F0,00
SIB-L4_F0,04->SIB-S4_F3,07
SIB-L4_F0,05->SIB-S4_F3,03
SIB-L4_F0,06->SIB-S4_F0,12
SIB-L4_F0,07->SIB-S4_F0,08
SIB-L4_F0,08->SIB-S4_F2,15
SIB-L4_F0,09->SIB-S4_F2,11
SIB-L4_F0,10->SIB-S4_F1,04
SIB-L4_F0,11->SIB-S4_F1,00
SIB-L4_F0,12->SIB-S4_F2,07
SIB-L4_F0,13->SIB-S4_F2,03
SIB-L4_F0,14->SIB-S4_F1,12
SIB-L4_F0,15->SIB-S4_F1,08
SIB-L4_F1,00->FPC7_B
SIB-L4_F1,01->FPC7_T
SIB-L4_F1,02->FPC6_B
SIB-L4_F1,03->FPC6_T
SIB-L4_F1,04->FPC5_B
SIB-L4_F1,05->FPC5_T
SIB-L4_F1,06->FPC4_B
SIB-L4_F1,07->FPC4_T
SIB-L4_F1,08->FPC3_B
SIB-L4_F1,09->FPC3_T
SIB-L4_F1,10->FPC2_B
SIB-L4_F1,11->FPC2_T
SIB-L4_F1,12->FPC1_B
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SIB-S4_F1,12->SIB-L4_F1,13 UP
SIB-S4_F2,03->SIB-L4_F1,14 UP
SIB-S4_F2,07->SIB-L4_F1,15 UP
SIB-L4_F1,13->FPC1_T
SIB-L4_F1,14->FPC0_B
SIB-L4_F1,15->FPC0_T
UP
UP
UP
show chassis fabric topology (TX Matrix Plus Router)
user@host> show chassis fabric topology
sfc0-re0:
-------------------------------------------------------------------------F13_SIB0
=========
Out-Links:
=========
SFC0_F13_SIB_00
VCSEL
HSL2
HSL2
Status
Channel Status
================================================================================
SF_30_00_FB_D(04,11) -> FPC0_T_SG(0,0,0)_FB_D(01,11)
OK
112
Up
SF_30_00_FB_D(04,10) -> FPC0_T_SG(0,0,1)_FB_D(01,10)
OK
112
Up
SF_30_00_FB_D(04,09) -> FPC0_T_SG(0,0,2)_FB_D(01,09)
OK
112
Up
SF_30_00_FB_D(04,08) -> FPC0_T_SG(0,0,3)_FB_D(01,08)
OK
112
Up
SF_30_00_FB_D(04,07) -> FPC0_T_SG(0,0,4)_FB_D(01,07)
OK
112
Up
SF_30_00_FB_D(04,06) -> FPC0_T_SG(0,0,5)_FB_D(01,06)
OK
112
Up
SF_30_00_FB_D(04,05) -> FPC0_T_SG(0,0,6)_FB_D(01,05)
OK
112
Up
SF_30_00_FB_D(04,04) -> FPC0_T_SG(0,0,7)_FB_D(01,04)
OK
112
Up
SF_30_01_FB_B(16,11) -> FPC4_T_SG(2,0,0)_FB_B(13,11)
OK
119
Up
SF_30_01_FB_B(16,10) -> FPC4_T_SG(2,0,1)_FB_B(13,10)
OK
119
Up
SF_30_01_FB_B(16,09) -> FPC4_T_SG(2,0,2)_FB_B(13,09)
OK
119
Up
SF_30_01_FB_B(16,08) -> FPC4_T_SG(2,0,3)_FB_B(13,08)
OK
119
Up
SF_30_01_FB_B(16,07) -> FPC4_T_SG(2,0,4)_FB_B(13,07)
OK
119
Up
SF_30_01_FB_B(16,06) -> FPC4_T_SG(2,0,5)_FB_B(13,06)
OK
119
Up
SF_30_01_FB_B(16,05) -> FPC4_T_SG(2,0,6)_FB_B(13,05)
OK
119
Up
SF_30_01_FB_B(16,04) -> FPC4_T_SG(2,0,7)_FB_B(13,04)
OK
119
Up
SF_30_02_FB_D(05,08) -> FPC1_T_SG(0,2,0)_FB_D(02,08)
OK
126
Up
SF_30_02_FB_D(05,07) -> FPC1_T_SG(0,2,1)_FB_D(02,07)
OK
126
Up
SF_30_02_FB_D(05,06) -> FPC1_T_SG(0,2,2)_FB_D(02,06)
OK
126
Up
SF_30_02_FB_D(05,05) -> FPC1_T_SG(0,2,3)_FB_D(02,05)
OK
126
Up
SF_30_02_FB_D(05,03) -> FPC1_T_SG(0,2,4)_FB_D(02,03)
OK
126
Up
SF_30_02_FB_D(05,02) -> FPC1_T_SG(0,2,5)_FB_D(02,02)
OK
126
Up
SF_30_02_FB_D(05,01) -> FPC1_T_SG(0,2,6)_FB_D(02,01)
OK
126
Up
SF_30_02_FB_D(05,00) -> FPC1_T_SG(0,2,7)_FB_D(02,00)
OK
126
Up
SF_30_03_FB_B(17,08) -> FPC5_T_SG(2,2,0)_FB_B(14,08)
OK
133
Up
SF_30_03_FB_B(17,07) -> FPC5_T_SG(2,2,1)_FB_B(14,07)
OK
133
Up
SF_30_03_FB_B(17,06) -> FPC5_T_SG(2,2,2)_FB_B(14,06)
OK
133
Up
SF_30_03_FB_B(17,05) -> FPC5_T_SG(2,2,3)_FB_B(14,05)
OK
133
Up
SF_30_03_FB_B(17,03) -> FPC5_T_SG(2,2,4)_FB_B(14,03)
OK
133
Up
SF_30_03_FB_B(17,02) -> FPC5_T_SG(2,2,5)_FB_B(14,02)
OK
133
Up
SF_30_03_FB_B(17,01) -> FPC5_T_SG(2,2,6)_FB_B(14,01)
OK
133
Up
SF_30_03_FB_B(17,00) -> FPC5_T_SG(2,2,7)_FB_B(14,00)
OK
133
Up
SF_30_04_FB_C(10,11) -> FPC2_T_SG(1,0,0)_FB_C(07,11)
OK
140
Up
SF_30_04_FB_C(10,10) -> FPC2_T_SG(1,0,1)_FB_C(07,10)
OK
140
Up
SF_30_04_FB_C(10,09) -> FPC2_T_SG(1,0,2)_FB_C(07,09)
OK
140
Up
SF_30_04_FB_C(10,08) -> FPC2_T_SG(1,0,3)_FB_C(07,08)
OK
140
Up
SF_30_04_FB_C(10,07) -> FPC2_T_SG(1,0,4)_FB_C(07,07)
OK
140
Up
SF_30_04_FB_C(10,06) -> FPC2_T_SG(1,0,5)_FB_C(07,06)
OK
140
Up
SF_30_04_FB_C(10,05) -> FPC2_T_SG(1,0,6)_FB_C(07,05)
OK
140
Up
SF_30_04_FB_C(10,04) -> FPC2_T_SG(1,0,7)_FB_C(07,04)
OK
140
Up
SF_30_05_FB_A(22,11) -> FPC6_T_SG(3,0,0)_FB_A(19,11)
OK
147
Up
SF_30_05_FB_A(22,10) -> FPC6_T_SG(3,0,1)_FB_A(19,10)
OK
147
Up
SF_30_05_FB_A(22,09) -> FPC6_T_SG(3,0,2)_FB_A(19,09)
OK
147
Up
Copyright © 2013, Juniper Networks, Inc.
-> LCC00_ST_SIB_L00
423
PTX Series Packet Transport Switch Software Documentation
SF_30_05_FB_A(22,08)
SF_30_05_FB_A(22,07)
SF_30_05_FB_A(22,06)
SF_30_05_FB_A(22,05)
SF_30_05_FB_A(22,04)
SF_30_06_FB_C(11,08)
SF_30_06_FB_C(11,07)
SF_30_06_FB_C(11,06)
SF_30_06_FB_C(11,05)
SF_30_06_FB_C(11,03)
SF_30_06_FB_C(11,02)
SF_30_06_FB_C(11,01)
SF_30_06_FB_C(11,00)
…
->
->
->
->
->
->
->
->
->
->
->
->
->
FPC6_T_SG(3,0,3)_FB_A(19,08)
FPC6_T_SG(3,0,4)_FB_A(19,07)
FPC6_T_SG(3,0,5)_FB_A(19,06)
FPC6_T_SG(3,0,6)_FB_A(19,05)
FPC6_T_SG(3,0,7)_FB_A(19,04)
FPC3_T_SG(1,2,0)_FB_C(08,08)
FPC3_T_SG(1,2,1)_FB_C(08,07)
FPC3_T_SG(1,2,2)_FB_C(08,06)
FPC3_T_SG(1,2,3)_FB_C(08,05)
FPC3_T_SG(1,2,4)_FB_C(08,03)
FPC3_T_SG(1,2,5)_FB_C(08,02)
FPC3_T_SG(1,2,6)_FB_C(08,01)
FPC3_T_SG(1,2,7)_FB_C(08,00)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
147
147
147
147
147
154
154
154
154
154
154
154
154
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
show chassis fabric topology sfc (TX Matrix Plus Router)
user@host> show chassis fabric topology sfc 0
sfc0-re0:
-------------------------------------------------------------------------F13_SIB0
=========
Out-Links:
=========
SFC0_F13_SIB_00
VCSEL
HSL2
HSL2
Status
Channel Status
================================================================================
SF_30_00_FB_D(04,11) -> FPC0_T_SG(0,0,0)_FB_D(01,11)
OK
112
Up
SF_30_00_FB_D(04,10) -> FPC0_T_SG(0,0,1)_FB_D(01,10)
OK
112
Up
SF_30_00_FB_D(04,09) -> FPC0_T_SG(0,0,2)_FB_D(01,09)
OK
112
Up
SF_30_00_FB_D(04,08) -> FPC0_T_SG(0,0,3)_FB_D(01,08)
OK
112
Up
SF_30_00_FB_D(04,07) -> FPC0_T_SG(0,0,4)_FB_D(01,07)
OK
112
Up
SF_30_00_FB_D(04,06) -> FPC0_T_SG(0,0,5)_FB_D(01,06)
OK
112
Up
SF_30_00_FB_D(04,05) -> FPC0_T_SG(0,0,6)_FB_D(01,05)
OK
112
Up
SF_30_00_FB_D(04,04) -> FPC0_T_SG(0,0,7)_FB_D(01,04)
OK
112
Up
SF_30_01_FB_B(16,11) -> FPC4_T_SG(2,0,0)_FB_B(13,11)
OK
119
Up
SF_30_01_FB_B(16,10) -> FPC4_T_SG(2,0,1)_FB_B(13,10)
OK
119
Up
SF_30_01_FB_B(16,09) -> FPC4_T_SG(2,0,2)_FB_B(13,09)
OK
119
Up
SF_30_01_FB_B(16,08) -> FPC4_T_SG(2,0,3)_FB_B(13,08)
OK
119
Up
SF_30_01_FB_B(16,07) -> FPC4_T_SG(2,0,4)_FB_B(13,07)
OK
119
Up
SF_30_01_FB_B(16,06) -> FPC4_T_SG(2,0,5)_FB_B(13,06)
OK
119
Up
SF_30_01_FB_B(16,05) -> FPC4_T_SG(2,0,6)_FB_B(13,05)
OK
119
Up
SF_30_01_FB_B(16,04) -> FPC4_T_SG(2,0,7)_FB_B(13,04)
OK
119
Up
SF_30_02_FB_D(05,08) -> FPC1_T_SG(0,2,0)_FB_D(02,08)
OK
126
Up
SF_30_02_FB_D(05,07) -> FPC1_T_SG(0,2,1)_FB_D(02,07)
OK
126
Up
SF_30_02_FB_D(05,06) -> FPC1_T_SG(0,2,2)_FB_D(02,06)
OK
126
Up
SF_30_02_FB_D(05,05) -> FPC1_T_SG(0,2,3)_FB_D(02,05)
OK
126
Up
SF_30_02_FB_D(05,03) -> FPC1_T_SG(0,2,4)_FB_D(02,03)
OK
126
Up
SF_30_02_FB_D(05,02) -> FPC1_T_SG(0,2,5)_FB_D(02,02)
OK
126
Up
SF_30_02_FB_D(05,01) -> FPC1_T_SG(0,2,6)_FB_D(02,01)
OK
126
Up
SF_30_02_FB_D(05,00) -> FPC1_T_SG(0,2,7)_FB_D(02,00)
OK
126
Up
SF_30_03_FB_B(17,08) -> FPC5_T_SG(2,2,0)_FB_B(14,08)
OK
133
Up
SF_30_03_FB_B(17,07) -> FPC5_T_SG(2,2,1)_FB_B(14,07)
OK
133
Up
SF_30_03_FB_B(17,06) -> FPC5_T_SG(2,2,2)_FB_B(14,06)
OK
133
Up
SF_30_03_FB_B(17,05) -> FPC5_T_SG(2,2,3)_FB_B(14,05)
OK
133
Up
SF_30_03_FB_B(17,03) -> FPC5_T_SG(2,2,4)_FB_B(14,03)
OK
133
Up
SF_30_03_FB_B(17,02) -> FPC5_T_SG(2,2,5)_FB_B(14,02)
OK
133
Up
SF_30_03_FB_B(17,01) -> FPC5_T_SG(2,2,6)_FB_B(14,01)
OK
133
Up
SF_30_03_FB_B(17,00) -> FPC5_T_SG(2,2,7)_FB_B(14,00)
OK
133
Up
424
-> LCC00_ST_SIB_L00
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SF_30_04_FB_C(10,11)
SF_30_04_FB_C(10,10)
SF_30_04_FB_C(10,09)
SF_30_04_FB_C(10,08)
SF_30_04_FB_C(10,07)
SF_30_04_FB_C(10,06)
SF_30_04_FB_C(10,05)
SF_30_04_FB_C(10,04)
SF_30_05_FB_A(22,11)
SF_30_05_FB_A(22,10)
SF_30_05_FB_A(22,09)
SF_30_05_FB_A(22,08)
SF_30_05_FB_A(22,07)
SF_30_05_FB_A(22,06)
SF_30_05_FB_A(22,05)
SF_30_05_FB_A(22,04)
SF_30_06_FB_C(11,08)
SF_30_06_FB_C(11,07)
SF_30_06_FB_C(11,06)
SF_30_06_FB_C(11,05)
SF_30_06_FB_C(11,03)
SF_30_06_FB_C(11,02)
SF_30_06_FB_C(11,01)
SF_30_06_FB_C(11,00)
…
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
FPC2_T_SG(1,0,0)_FB_C(07,11)
FPC2_T_SG(1,0,1)_FB_C(07,10)
FPC2_T_SG(1,0,2)_FB_C(07,09)
FPC2_T_SG(1,0,3)_FB_C(07,08)
FPC2_T_SG(1,0,4)_FB_C(07,07)
FPC2_T_SG(1,0,5)_FB_C(07,06)
FPC2_T_SG(1,0,6)_FB_C(07,05)
FPC2_T_SG(1,0,7)_FB_C(07,04)
FPC6_T_SG(3,0,0)_FB_A(19,11)
FPC6_T_SG(3,0,1)_FB_A(19,10)
FPC6_T_SG(3,0,2)_FB_A(19,09)
FPC6_T_SG(3,0,3)_FB_A(19,08)
FPC6_T_SG(3,0,4)_FB_A(19,07)
FPC6_T_SG(3,0,5)_FB_A(19,06)
FPC6_T_SG(3,0,6)_FB_A(19,05)
FPC6_T_SG(3,0,7)_FB_A(19,04)
FPC3_T_SG(1,2,0)_FB_C(08,08)
FPC3_T_SG(1,2,1)_FB_C(08,07)
FPC3_T_SG(1,2,2)_FB_C(08,06)
FPC3_T_SG(1,2,3)_FB_C(08,05)
FPC3_T_SG(1,2,4)_FB_C(08,03)
FPC3_T_SG(1,2,5)_FB_C(08,02)
FPC3_T_SG(1,2,6)_FB_C(08,01)
FPC3_T_SG(1,2,7)_FB_C(08,00)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
140
140
140
140
140
140
140
140
147
147
147
147
147
147
147
147
154
154
154
154
154
154
154
154
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
show chassis fabric topology lcc (TX Matrix Plus Router)
user@host> show chassis fabric topology lcc 0
lcc0-re0:
-------------------------------------------------------------------------SIB0
=========
Out-Links:
=========
LCC00_ST_SIB_L00
VCSEL
HSL2
HSL2
Status
Channel Status
================================================================================
FPC0_T_SG(0,0,0)_FB_D(04,11) -> SF_10_00_FB_D(01,11)
OK
12
Up
FPC0_T_SG(0,0,1)_FB_D(04,10) -> SF_10_00_FB_D(01,10)
OK
12
Up
FPC0_T_SG(0,0,2)_FB_D(04,09) -> SF_10_00_FB_D(01,09)
OK
12
Up
FPC0_T_SG(0,0,3)_FB_D(04,08) -> SF_10_00_FB_D(01,08)
OK
12
Up
FPC0_T_SG(0,0,4)_FB_D(04,07) -> SF_10_00_FB_D(01,07)
OK
12
Up
FPC0_T_SG(0,0,5)_FB_D(04,06) -> SF_10_00_FB_D(01,06)
OK
12
Up
FPC0_T_SG(0,0,6)_FB_D(04,05) -> SF_10_00_FB_D(01,05)
OK
12
Up
FPC0_T_SG(0,0,7)_FB_D(04,04) -> SF_10_00_FB_D(01,04)
OK
12
Up
FPC0_B_SG(0,1,0)_FB_D(03,07) -> SF_10_10_FB_D(00,07)
OK
15
Up
FPC0_B_SG(0,1,1)_FB_D(03,06) -> SF_10_10_FB_D(00,06)
OK
15
Up
FPC0_B_SG(0,1,2)_FB_D(03,05) -> SF_10_10_FB_D(00,05)
OK
15
Up
FPC0_B_SG(0,1,3)_FB_D(03,04) -> SF_10_10_FB_D(00,04)
OK
15
Up
FPC0_B_SG(0,1,4)_FB_D(03,03) -> SF_10_10_FB_D(00,03)
OK
15
Up
FPC0_B_SG(0,1,5)_FB_D(03,02) -> SF_10_10_FB_D(00,02)
OK
15
Up
FPC0_B_SG(0,1,6)_FB_D(03,01) -> SF_10_10_FB_D(00,01)
OK
15
Up
FPC0_B_SG(0,1,7)_FB_D(03,00) -> SF_10_10_FB_D(00,00)
OK
15
Up
FPC1_T_SG(0,2,0)_FB_D(05,08) -> SF_10_02_FB_D(02,08)
OK
18
Up
FPC1_T_SG(0,2,1)_FB_D(05,07) -> SF_10_02_FB_D(02,07)
OK
18
Up
FPC1_T_SG(0,2,2)_FB_D(05,06) -> SF_10_02_FB_D(02,06)
OK
18
Up
FPC1_T_SG(0,2,3)_FB_D(05,05) -> SF_10_02_FB_D(02,05)
OK
18
Up
FPC1_T_SG(0,2,4)_FB_D(05,03) -> SF_10_02_FB_D(02,03)
OK
18
Up
Copyright © 2013, Juniper Networks, Inc.
-> SFC0_F13_SIB_00
425
PTX Series Packet Transport Switch Software Documentation
FPC1_T_SG(0,2,5)_FB_D(05,02)
FPC1_T_SG(0,2,6)_FB_D(05,01)
FPC1_T_SG(0,2,7)_FB_D(05,00)
FPC1_B_SG(0,3,0)_FB_D(04,03)
FPC1_B_SG(0,3,1)_FB_D(04,02)
FPC1_B_SG(0,3,2)_FB_D(04,01)
FPC1_B_SG(0,3,3)_FB_D(04,00)
FPC1_B_SG(0,3,4)_FB_D(03,11)
FPC1_B_SG(0,3,5)_FB_D(03,10)
FPC1_B_SG(0,3,6)_FB_D(03,09)
FPC1_B_SG(0,3,7)_FB_D(03,08)
FPC2_T_SG(1,0,0)_FB_C(10,11)
FPC2_T_SG(1,0,1)_FB_C(10,10)
FPC2_T_SG(1,0,2)_FB_C(10,09)
FPC2_T_SG(1,0,3)_FB_C(10,08)
FPC2_T_SG(1,0,4)_FB_C(10,07)
FPC2_T_SG(1,0,5)_FB_C(10,06)
FPC2_T_SG(1,0,6)_FB_C(10,05)
FPC2_T_SG(1,0,7)_FB_C(10,04)
FPC2_B_SG(1,1,0)_FB_C(09,07)
FPC2_B_SG(1,1,1)_FB_C(09,06)
FPC2_B_SG(1,1,2)_FB_C(09,05)
FPC2_B_SG(1,1,3)_FB_C(09,04)
FPC2_B_SG(1,1,4)_FB_C(09,03)
FPC2_B_SG(1,1,5)_FB_C(09,02)
FPC2_B_SG(1,1,6)_FB_C(09,01)
FPC2_B_SG(1,1,7)_FB_C(09,00)
FPC3_T_SG(1,2,0)_FB_C(11,08)
FPC3_T_SG(1,2,1)_FB_C(11,07)
FPC3_T_SG(1,2,2)_FB_C(11,06)
FPC3_T_SG(1,2,3)_FB_C(11,05)
FPC3_T_SG(1,2,4)_FB_C(11,03)
FPC3_T_SG(1,2,5)_FB_C(11,02)
FPC3_T_SG(1,2,6)_FB_C(11,01)
...
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
->
SF_10_02_FB_D(02,02)
SF_10_02_FB_D(02,01)
SF_10_02_FB_D(02,00)
SF_10_11_FB_D(01,03)
SF_10_11_FB_D(01,02)
SF_10_11_FB_D(01,01)
SF_10_11_FB_D(01,00)
SF_10_11_FB_D(00,11)
SF_10_11_FB_D(00,10)
SF_10_11_FB_D(00,09)
SF_10_11_FB_D(00,08)
SF_10_04_FB_C(07,11)
SF_10_04_FB_C(07,10)
SF_10_04_FB_C(07,09)
SF_10_04_FB_C(07,08)
SF_10_04_FB_C(07,07)
SF_10_04_FB_C(07,06)
SF_10_04_FB_C(07,05)
SF_10_04_FB_C(07,04)
SF_10_14_FB_C(06,07)
SF_10_14_FB_C(06,06)
SF_10_14_FB_C(06,05)
SF_10_14_FB_C(06,04)
SF_10_14_FB_C(06,03)
SF_10_14_FB_C(06,02)
SF_10_14_FB_C(06,01)
SF_10_14_FB_C(06,00)
SF_10_06_FB_C(08,08)
SF_10_06_FB_C(08,07)
SF_10_06_FB_C(08,06)
SF_10_06_FB_C(08,05)
SF_10_06_FB_C(08,03)
SF_10_06_FB_C(08,02)
SF_10_06_FB_C(08,01)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
18
18
18
21
21
21
21
21
21
21
21
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
18
18
18
18
18
18
18
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
show chassis fabric topology (T4000 Core Router)
user@host> show chassis fabric topology 0
fchip (mode)
In-links
State
Out-links
State
--------------------------------------------------------------------------------
SIB0 :
--------Onboard Links
------------SIB0_XF1,14_0->SIB0_XF,00_0
SIB0_XF,00_0->SIB0_XF1,14_0
SIB0_XF1,13_0->SIB0_XF,01_0
SIB0_XF,01_0->SIB0_XF1,13_0
SIB0_XF1,12_0->SIB0_XF,02_0
SIB0_XF,02_0->SIB0_XF1,12_0
SIB0_XF1,11_0->SIB0_XF,03_0
SIB0_XF,03_0->SIB0_XF1,11_0
SIB0_XF1,10_0->SIB0_XF,04_0
SIB0_XF,04_0->SIB0_XF1,10_0
SIB0_XF1,09_0->SIB0_XF,05_0
SIB0_XF,05_0->SIB0_XF1,09_0
426
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
SIB0_XF,00_0->SIB0_XF1,14_0
SIB0_XF1,14_0->SIB0_XF,00_0
SIB0_XF,01_0->SIB0_XF1,13_0
SIB0_XF1,13_0->SIB0_XF,01_0
SIB0_XF,02_0->SIB0_XF1,12_0
SIB0_XF1,12_0->SIB0_XF,02_0
SIB0_XF,03_0->SIB0_XF1,11_0
SIB0_XF1,11_0->SIB0_XF,03_0
SIB0_XF,04_0->SIB0_XF1,10_0
SIB0_XF1,10_0->SIB0_XF,04_0
SIB0_XF,05_0->SIB0_XF1,09_0
SIB0_XF1,09_0->SIB0_XF,05_0
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SIB0_XF2,14_0->SIB0_XF,06_0
SIB0_XF,06_0->SIB0_XF2,14_0
SIB0_XF2,13_0->SIB0_XF,07_0
SIB0_XF,07_0->SIB0_XF2,13_0
SIB0_XF2,12_0->SIB0_XF,08_0
SIB0_XF,08_0->SIB0_XF2,12_0
SIB0_XF2,11_0->SIB0_XF,09_0
SIB0_XF,09_0->SIB0_XF2,11_0
SIB0_XF2,10_0->SIB0_XF,10_0
SIB0_XF,10_0->SIB0_XF2,10_0
SIB0_XF2,09_0->SIB0_XF,11_0
SIB0_XF,11_0->SIB0_XF2,09_0
SIB0_XF3,13_0->SIB0_XF,12_0
SIB0_XF,12_0->SIB0_XF3,13_0
SIB0_XF3,12_0->SIB0_XF,13_0
SIB0_XF,13_0->SIB0_XF3,12_0
SIB0_XF3,11_0->SIB0_XF,14_0
SIB0_XF,14_0->SIB0_XF3,11_0
SIB0_XF3,10_0->SIB0_XF,15_0
SIB0_XF,15_0->SIB0_XF3,10_0
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
SIB0_XF,06_0->SIB0_XF2,14_0
SIB0_XF2,14_0->SIB0_XF,06_0
SIB0_XF,07_0->SIB0_XF2,13_0
SIB0_XF2,13_0->SIB0_XF,07_0
SIB0_XF,08_0->SIB0_XF2,12_0
SIB0_XF2,12_0->SIB0_XF,08_0
SIB0_XF,09_0->SIB0_XF2,11_0
SIB0_XF2,11_0->SIB0_XF,09_0
SIB0_XF,10_0->SIB0_XF2,10_0
SIB0_XF2,10_0->SIB0_XF,10_0
SIB0_XF,11_0->SIB0_XF2,09_0
SIB0_XF2,09_0->SIB0_XF,11_0
SIB0_XF,12_0->SIB0_XF3,13_0
SIB0_XF3,13_0->SIB0_XF,12_0
SIB0_XF,13_0->SIB0_XF3,12_0
SIB0_XF3,12_0->SIB0_XF,13_0
SIB0_XF,14_0->SIB0_XF3,11_0
SIB0_XF3,11_0->SIB0_XF,14_0
SIB0_XF,15_0->SIB0_XF3,10_0
SIB0_XF3,10_0->SIB0_XF,15_0
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
PFE Links
--------------FPC2PFE0->SIB0_XF1,05_0
FPC3PFE0->SIB0_XF2,15_0
FPC5PFE0->SIB0_XF2,05_0
FPC5PFE1->SIB0_XF2,07_0
FPC6PFE0->SIB0_XF3,01_0
FPC6PFE0->SIB0_XF3,01_1
FPC6PFE0->SIB0_XF3,02_0
FPC6PFE1->SIB0_XF3,03_0
FPC6PFE1->SIB0_XF3,03_1
FPC6PFE1->SIB0_XF3,02_1
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
SIB0_XF1,05_0->FPC2PFE0
SIB0_XF2,15_0->FPC3PFE0
SIB0_XF2,05_0->FPC5PFE0
SIB0_XF2,07_0->FPC5PFE1
SIB0_XF3,01_0->FPC6PFE0
SIB0_XF3,01_1->FPC6PFE0
SIB0_XF3,02_0->FPC6PFE0
SIB0_XF3,03_0->FPC6PFE1
SIB0_XF3,03_1->FPC6PFE1
SIB0_XF3,02_1->FPC6PFE1
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
show chassis fabric topology (PTX Series Packet Transport Switches)
user@host> show chassis fabric topology
In-link : FPC# FE# TQ# (TQ-TX sub-chnl #) ->
SIB# TF#_FCORE# (TF-RX port#, TF-RX sub-chn#, TF-RX inst#)
Out-link : SIB# TF#_FCORE# (TF-TX port#, TF-TX sub-chn#, TF-TX inst#) ->
FPC# FE# TQ# (TQ-RX sub-chnl #)
(6, 4, 06) in FPC02FE0TQ0(02)->S01F0_0(6,4,06) will be TF Rx Port 6, TF CCL Rx
Sub-Channel 4, TF CCL Rx Instance 6.
(2, 7, 10) in S01F0_0(2,7,10)->FPC02FE0TQ0(02) will be TF-Tx Port 2, TF CCL Tx
Sub-channel 7, TF CCL Tx Instance 10.
SIB 0 FCHIP 0 FCORE 0 :
----------------------In-links
State
Out-links
State
-------------------------------------------------------------------------------FPC00FE0TQ0(00)->S00F0_0(7,4,07) OK
S00F0_0(3,7,11)->FPC00FE0TQ0(00) OK
FPC00FE1TQ1(00)->S00F0_0(7,6,07) OK
S00F0_0(3,5,11)->FPC00FE1TQ1(00) OK
FPC00FE2TQ2(00)->S00F0_0(7,5,07) OK
S00F0_0(3,6,11)->FPC00FE2TQ2(00) OK
FPC00FE3TQ3(00)->S00F0_0(7,7,07) OK
S00F0_0(3,4,11)->FPC00FE3TQ3(00) OK
FPC01FE0TQ0(00)->S00F0_0(7,0,07) OK
S00F0_0(3,3,11)->FPC01FE0TQ0(00) OK
FPC01FE1TQ1(00)->S00F0_0(7,1,07) OK
S00F0_0(3,1,11)->FPC01FE1TQ1(00) OK
FPC01FE2TQ2(00)->S00F0_0(7,2,07) OK
S00F0_0(3,2,11)->FPC01FE2TQ2(00) Error
FPC01FE3TQ3(00)->S00F0_0(7,3,07) OK
S00F0_0(3,0,11)->FPC01FE3TQ3(00) OK
FPC02FE0TQ0(00)->S00F0_0(6,4,06) OK
S00F0_0(2,7,10)->FPC02FE0TQ0(00) OK
FPC02FE1TQ1(00)->S00F0_0(6,5,06) OK
S00F0_0(2,5,10)->FPC02FE1TQ1(00) OK
FPC02FE2TQ2(00)->S00F0_0(6,6,06) OK
S00F0_0(2,6,10)->FPC02FE2TQ2(00) OK
Copyright © 2013, Juniper Networks, Inc.
427
PTX Series Packet Transport Switch Software Documentation
FPC02FE3TQ3(00)->S00F0_0(6,7,06)
FPC03FE0TQ0(00)->S00F0_0(6,0,06)
FPC03FE1TQ1(00)->S00F0_0(6,1,06)
FPC03FE2TQ2(00)->S00F0_0(6,2,06)
FPC03FE3TQ3(00)->S00F0_0(6,3,06)
FPC04FE0TQ0(00)->S00F0_0(5,4,05)
FPC04FE1TQ1(00)->S00F0_0(5,5,05)
FPC04FE2TQ2(00)->S00F0_0(5,6,05)
FPC04FE3TQ3(00)->S00F0_0(5,7,05)
FPC05FE0TQ0(00)->S00F0_0(5,0,05)
FPC05FE1TQ1(00)->S00F0_0(5,1,05)
FPC05FE2TQ2(00)->S00F0_0(5,2,05)
FPC05FE3TQ3(00)->S00F0_0(5,3,05)
FPC06FE0TQ0(00)->S00F0_0(4,4,04)
FPC06FE1TQ1(00)->S00F0_0(4,5,04)
FPC06FE2TQ2(00)->S00F0_0(4,6,04)
FPC06FE3TQ3(00)->S00F0_0(4,7,04)
FPC07FE0TQ0(00)->S00F0_0(4,2,04)
FPC07FE1TQ1(00)->S00F0_0(4,0,04)
FPC07FE2TQ2(00)->S00F0_0(4,1,04)
FPC07FE3TQ3(00)->S00F0_0(4,3,04)
OK
Down
Down
Down
Down
OK
OK
OK
OK
OK
OK
OK
OK
Down
Down
Down
Down
Down
Down
Down
Down
S00F0_0(2,4,10)->FPC02FE3TQ3(00)
S00F0_0(2,3,10)->FPC03FE0TQ0(00)
S00F0_0(2,0,10)->FPC03FE1TQ1(00)
S00F0_0(2,2,10)->FPC03FE2TQ2(00)
S00F0_0(2,1,10)->FPC03FE3TQ3(00)
S00F0_0(1,7,09)->FPC04FE0TQ0(00)
S00F0_0(1,6,09)->FPC04FE1TQ1(00)
S00F0_0(1,4,09)->FPC04FE2TQ2(00)
S00F0_0(1,5,09)->FPC04FE3TQ3(00)
S00F0_0(1,3,09)->FPC05FE0TQ0(00)
S00F0_0(1,0,09)->FPC05FE1TQ1(00)
S00F0_0(1,2,09)->FPC05FE2TQ2(00)
S00F0_0(1,1,09)->FPC05FE3TQ3(00)
S00F0_0(0,7,08)->FPC06FE0TQ0(00)
S00F0_0(0,5,08)->FPC06FE1TQ1(00)
S00F0_0(0,6,08)->FPC06FE2TQ2(00)
S00F0_0(0,4,08)->FPC06FE3TQ3(00)
S00F0_0(0,3,08)->FPC07FE0TQ0(00)
S00F0_0(0,0,08)->FPC07FE1TQ1(00)
S00F0_0(0,1,08)->FPC07FE2TQ2(00)
S00F0_0(0,2,08)->FPC07FE3TQ3(00)
OK
Down
Down
Down
Down
OK
OK
OK
OK
OK
OK
OK
OK
Down
Down
Down
Down
Down
Down
Down
Down
SIB 0 FCHIP 0 FCORE 1 :
----------------------In-links
State
Out-links
State
-------------------------------------------------------------------------------FPC00FE0TQ0(01)->S00F0_1(3,4,11) OK
S00F0_1(7,6,07)->FPC00FE0TQ0(01) OK
FPC00FE1TQ1(01)->S00F0_1(3,5,11) OK
S00F0_1(7,4,07)->FPC00FE1TQ1(01) OK
FPC00FE2TQ2(01)->S00F0_1(3,6,11) OK
S00F0_1(7,7,07)->FPC00FE2TQ2(01) OK
FPC00FE3TQ3(01)->S00F0_1(3,7,11) OK
S00F0_1(7,5,07)->FPC00FE3TQ3(01) OK
FPC01FE0TQ0(01)->S00F0_1(3,0,11) OK
S00F0_1(7,2,07)->FPC01FE0TQ0(01) OK
FPC01FE1TQ1(01)->S00F0_1(3,1,11) OK
S00F0_1(7,0,07)->FPC01FE1TQ1(01) OK
FPC01FE2TQ2(01)->S00F0_1(3,2,11) OK
S00F0_1(7,3,07)->FPC01FE2TQ2(01) OK
FPC01FE3TQ3(01)->S00F0_1(3,3,11) OK
S00F0_1(7,1,07)->FPC01FE3TQ3(01) OK
FPC02FE0TQ0(01)->S00F0_1(2,4,10) OK
S00F0_1(6,5,06)->FPC02FE0TQ0(01) OK
FPC02FE1TQ1(01)->S00F0_1(2,5,10) OK
S00F0_1(6,4,06)->FPC02FE1TQ1(01) OK
FPC02FE2TQ2(01)->S00F0_1(2,6,10) OK
S00F0_1(6,7,06)->FPC02FE2TQ2(01) OK
FPC02FE3TQ3(01)->S00F0_1(2,7,10) OK
S00F0_1(6,6,06)->FPC02FE3TQ3(01) OK
FPC03FE0TQ0(01)->S00F0_1(2,0,10) Down
S00F0_1(6,1,06)->FPC03FE0TQ0(01) Down
FPC03FE1TQ1(01)->S00F0_1(2,1,10) Down
S00F0_1(6,0,06)->FPC03FE1TQ1(01) Down
FPC03FE2TQ2(01)->S00F0_1(2,2,10) Down
S00F0_1(6,3,06)->FPC03FE2TQ2(01) Down
FPC03FE3TQ3(01)->S00F0_1(2,3,10) Down
S00F0_1(6,2,06)->FPC03FE3TQ3(01) Down
FPC04FE0TQ0(01)->S00F0_1(1,4,09) OK
S00F0_1(5,5,05)->FPC04FE0TQ0(01) OK
FPC04FE1TQ1(01)->S00F0_1(1,5,09) OK
S00F0_1(5,4,05)->FPC04FE1TQ1(01) OK
FPC04FE2TQ2(01)->S00F0_1(1,6,09) OK
S00F0_1(5,7,05)->FPC04FE2TQ2(01) OK
FPC04FE3TQ3(01)->S00F0_1(1,7,09) OK
S00F0_1(5,6,05)->FPC04FE3TQ3(01) OK
FPC05FE0TQ0(01)->S00F0_1(1,0,09) OK
S00F0_1(5,1,05)->FPC05FE0TQ0(01) OK
FPC05FE1TQ1(01)->S00F0_1(1,1,09) OK
S00F0_1(5,0,05)->FPC05FE1TQ1(01) OK
FPC05FE2TQ2(01)->S00F0_1(1,2,09) OK
S00F0_1(5,3,05)->FPC05FE2TQ2(01) OK
FPC05FE3TQ3(01)->S00F0_1(1,3,09) OK
S00F0_1(5,2,05)->FPC05FE3TQ3(01) OK
FPC06FE0TQ0(01)->S00F0_1(0,4,08) Down
S00F0_1(4,7,04)->FPC06FE0TQ0(01) Down
FPC06FE1TQ1(01)->S00F0_1(0,5,08) Down
S00F0_1(4,0,04)->FPC06FE1TQ1(01) Down
FPC06FE2TQ2(01)->S00F0_1(0,6,08) Down
S00F0_1(4,6,04)->FPC06FE2TQ2(01) Down
FPC06FE3TQ3(01)->S00F0_1(0,7,08) Down
S00F0_1(4,1,04)->FPC06FE3TQ3(01) Down
FPC07FE0TQ0(01)->S00F0_1(0,0,08) Down
S00F0_1(4,3,04)->FPC07FE0TQ0(01) Down
FPC07FE1TQ1(01)->S00F0_1(0,1,08) Down
S00F0_1(4,4,04)->FPC07FE1TQ1(01) Down
FPC07FE2TQ2(01)->S00F0_1(0,2,08) Down
S00F0_1(4,2,04)->FPC07FE2TQ2(01) Down
FPC07FE3TQ3(01)->S00F0_1(0,3,08) Down
S00F0_1(4,5,04)->FPC07FE3TQ3(01) Down
SIB 1 FCHIP 0 FCORE 0 :
-----------------------
428
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
In-links
State
Out-links
State
-------------------------------------------------------------------------------FPC00FE0TQ0(02)->S01F0_0(7,4,07) Error
S01F0_0(3,7,11)->FPC00FE0TQ0(02) Down
FPC00FE1TQ1(02)->S01F0_0(7,6,07) OK
S01F0_0(3,5,11)->FPC00FE1TQ1(02) OK
FPC00FE2TQ2(02)->S01F0_0(7,5,07) OK
S01F0_0(3,6,11)->FPC00FE2TQ2(02) OK
FPC00FE3TQ3(02)->S01F0_0(7,7,07) OK
S01F0_0(3,4,11)->FPC00FE3TQ3(02) OK
FPC01FE0TQ0(02)->S01F0_0(7,0,07) OK
S01F0_0(3,3,11)->FPC01FE0TQ0(02) OK
FPC01FE1TQ1(02)->S01F0_0(7,1,07) OK
S01F0_0(3,1,11)->FPC01FE1TQ1(02) OK
FPC01FE2TQ2(02)->S01F0_0(7,2,07) OK
S01F0_0(3,2,11)->FPC01FE2TQ2(02) OK
FPC01FE3TQ3(02)->S01F0_0(7,3,07) OK
S01F0_0(3,0,11)->FPC01FE3TQ3(02) OK
FPC02FE0TQ0(02)->S01F0_0(6,4,06) OK
S01F0_0(2,7,10)->FPC02FE0TQ0(02) OK
FPC02FE1TQ1(02)->S01F0_0(6,5,06) OK
S01F0_0(2,5,10)->FPC02FE1TQ1(02) OK
FPC02FE2TQ2(02)->S01F0_0(6,6,06) OK
S01F0_0(2,6,10)->FPC02FE2TQ2(02) OK
FPC02FE3TQ3(02)->S01F0_0(6,7,06) OK
S01F0_0(2,4,10)->FPC02FE3TQ3(02) OK
FPC03FE0TQ0(02)->S01F0_0(6,0,06) Down
S01F0_0(2,3,10)->FPC03FE0TQ0(02) Down
FPC03FE1TQ1(02)->S01F0_0(6,1,06) Down
S01F0_0(2,0,10)->FPC03FE1TQ1(02) Down
FPC03FE2TQ2(02)->S01F0_0(6,2,06) Down
S01F0_0(2,2,10)->FPC03FE2TQ2(02) Down
FPC03FE3TQ3(02)->S01F0_0(6,3,06) Down
S01F0_0(2,1,10)->FPC03FE3TQ3(02) Down
FPC04FE0TQ0(02)->S01F0_0(5,4,05) OK
S01F0_0(1,7,09)->FPC04FE0TQ0(02) OK
FPC04FE1TQ1(02)->S01F0_0(5,5,05) OK
S01F0_0(1,6,09)->FPC04FE1TQ1(02) OK
FPC04FE2TQ2(02)->S01F0_0(5,6,05) OK
S01F0_0(1,4,09)->FPC04FE2TQ2(02) OK
FPC04FE3TQ3(02)->S01F0_0(5,7,05) OK
S01F0_0(1,5,09)->FPC04FE3TQ3(02) OK
FPC05FE0TQ0(02)->S01F0_0(5,0,05) OK
S01F0_0(1,3,09)->FPC05FE0TQ0(02) OK
FPC05FE1TQ1(02)->S01F0_0(5,1,05) OK
S01F0_0(1,0,09)->FPC05FE1TQ1(02) OK
FPC05FE2TQ2(02)->S01F0_0(5,2,05) OK
S01F0_0(1,2,09)->FPC05FE2TQ2(02) OK
FPC05FE3TQ3(02)->S01F0_0(5,3,05) OK
S01F0_0(1,1,09)->FPC05FE3TQ3(02) OK
FPC06FE0TQ0(02)->S01F0_0(4,4,04) Down
S01F0_0(0,7,08)->FPC06FE0TQ0(02) Down
FPC06FE1TQ1(02)->S01F0_0(4,5,04) Down
S01F0_0(0,5,08)->FPC06FE1TQ1(02) Down
FPC06FE2TQ2(02)->S01F0_0(4,6,04) Down
S01F0_0(0,6,08)->FPC06FE2TQ2(02) Down
FPC06FE3TQ3(02)->S01F0_0(4,7,04) Down
S01F0_0(0,4,08)->FPC06FE3TQ3(02) Down
FPC07FE0TQ0(02)->S01F0_0(4,2,04) Down
S01F0_0(0,3,08)->FPC07FE0TQ0(02) Down
FPC07FE1TQ1(02)->S01F0_0(4,0,04) Down
S01F0_0(0,0,08)->FPC07FE1TQ1(02) Down
FPC07FE2TQ2(02)->S01F0_0(4,1,04) Down
S01F0_0(0,1,08)->FPC07FE2TQ2(02) Down
FPC07FE3TQ3(02)->S01F0_0(4,3,04) Down
S01F0_0(0,2,08)->FPC07FE3TQ3(02) Down
SIB 1 FCHIP 0 FCORE 1 :
----------------------In-links
State
Out-links
State
-------------------------------------------------------------------------------FPC00FE0TQ0(03)->S01F0_1(3,4,11) OK
S01F0_1(7,6,07)->FPC00FE0TQ0(03) OK
FPC00FE1TQ1(03)->S01F0_1(3,5,11) OK
S01F0_1(7,4,07)->FPC00FE1TQ1(03) OK
FPC00FE2TQ2(03)->S01F0_1(3,6,11) OK
S01F0_1(7,7,07)->FPC00FE2TQ2(03) OK
FPC00FE3TQ3(03)->S01F0_1(3,7,11) OK
S01F0_1(7,5,07)->FPC00FE3TQ3(03) OK
FPC01FE0TQ0(03)->S01F0_1(3,0,11) OK
S01F0_1(7,2,07)->FPC01FE0TQ0(03) OK
FPC01FE1TQ1(03)->S01F0_1(3,1,11) OK
S01F0_1(7,0,07)->FPC01FE1TQ1(03) OK
FPC01FE2TQ2(03)->S01F0_1(3,2,11) OK
S01F0_1(7,3,07)->FPC01FE2TQ2(03) OK
FPC01FE3TQ3(03)->S01F0_1(3,3,11) OK
S01F0_1(7,1,07)->FPC01FE3TQ3(03) OK
FPC02FE0TQ0(03)->S01F0_1(2,4,10) OK
S01F0_1(6,5,06)->FPC02FE0TQ0(03) OK
FPC02FE1TQ1(03)->S01F0_1(2,5,10) OK
S01F0_1(6,4,06)->FPC02FE1TQ1(03) OK
FPC02FE2TQ2(03)->S01F0_1(2,6,10) OK
S01F0_1(6,7,06)->FPC02FE2TQ2(03) OK
FPC02FE3TQ3(03)->S01F0_1(2,7,10) OK
S01F0_1(6,6,06)->FPC02FE3TQ3(03) OK
FPC03FE0TQ0(03)->S01F0_1(2,0,10) Down
S01F0_1(6,1,06)->FPC03FE0TQ0(03) Down
FPC03FE1TQ1(03)->S01F0_1(2,1,10) Down
S01F0_1(6,0,06)->FPC03FE1TQ1(03) Down
FPC03FE2TQ2(03)->S01F0_1(2,2,10) Down
S01F0_1(6,3,06)->FPC03FE2TQ2(03) Down
FPC03FE3TQ3(03)->S01F0_1(2,3,10) Down
S01F0_1(6,2,06)->FPC03FE3TQ3(03) Down
FPC04FE0TQ0(03)->S01F0_1(1,4,09) OK
S01F0_1(5,5,05)->FPC04FE0TQ0(03) OK
FPC04FE1TQ1(03)->S01F0_1(1,5,09) OK
S01F0_1(5,4,05)->FPC04FE1TQ1(03) OK
FPC04FE2TQ2(03)->S01F0_1(1,6,09) OK
S01F0_1(5,7,05)->FPC04FE2TQ2(03) OK
FPC04FE3TQ3(03)->S01F0_1(1,7,09) OK
S01F0_1(5,6,05)->FPC04FE3TQ3(03) OK
FPC05FE0TQ0(03)->S01F0_1(1,0,09) OK
S01F0_1(5,1,05)->FPC05FE0TQ0(03) OK
FPC05FE1TQ1(03)->S01F0_1(1,1,09) OK
S01F0_1(5,0,05)->FPC05FE1TQ1(03) OK
Copyright © 2013, Juniper Networks, Inc.
429
PTX Series Packet Transport Switch Software Documentation
FPC05FE2TQ2(03)->S01F0_1(1,2,09)
FPC05FE3TQ3(03)->S01F0_1(1,3,09)
FPC06FE0TQ0(03)->S01F0_1(0,4,08)
FPC06FE1TQ1(03)->S01F0_1(0,5,08)
FPC06FE2TQ2(03)->S01F0_1(0,6,08)
FPC06FE3TQ3(03)->S01F0_1(0,7,08)
FPC07FE0TQ0(03)->S01F0_1(0,0,08)
FPC07FE1TQ1(03)->S01F0_1(0,1,08)
FPC07FE2TQ2(03)->S01F0_1(0,2,08)
FPC07FE3TQ3(03)->S01F0_1(0,3,08)
430
OK
OK
Down
Down
Down
Down
Down
Down
Down
Down
S01F0_1(5,3,05)->FPC05FE2TQ2(03)
S01F0_1(5,2,05)->FPC05FE3TQ3(03)
S01F0_1(4,7,04)->FPC06FE0TQ0(03)
S01F0_1(4,0,04)->FPC06FE1TQ1(03)
S01F0_1(4,6,04)->FPC06FE2TQ2(03)
S01F0_1(4,1,04)->FPC06FE3TQ3(03)
S01F0_1(4,3,04)->FPC07FE0TQ0(03)
S01F0_1(4,4,04)->FPC07FE1TQ1(03)
S01F0_1(4,2,04)->FPC07FE2TQ2(03)
S01F0_1(4,5,04)->FPC07FE3TQ3(03)
OK
OK
Down
Down
Down
Down
Down
Down
Down
Down
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis fan
Syntax
show chassis fan
Syntax (ACX4000
Series Router)
show chassis fan
Syntax (MX Series
Router)
show chassis fan
<all-members>
<local>
<member member-id>
Syntax (T Series
Routers)
show chassis fan
Syntax (MX2010 3D
Universal Edge Router)
show chassis fan
Syntax (MX2020 3D
Universal Edge Router)
show chassis fan
Syntax (QFabric
Systems)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
show chassis fan
<interconnect-device name>
show chassis fan
<lcc number | scc>
show chassis fan
<lcc number | sfc number>
Command introduced in Junos OS Release 10.0 on MX Series 3D Universal Edge Routers,
M120 routers, and M320 routers, T320 routers, T640 routers, T1600 routers, TX Matrix
Routers, and TX Matrix Plus Routers.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 11.4 for EX Series switches.
Command introduced in Junos OS Release 12.3 for PTX5000 Packet Transport Switches.
Command introduced in Junos OS Release 12.1 for T4000 routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for ACX Series Routers.
(T Series routers, TX Matrix routers, TX Matrix Plus router, M120 routers, M320 routers,
MX2010 routers, MX2020 routers, MX Series 3D Universal Edge Routers, QFX3008-I
Interconnect devices, EX Series switches, and PTX Series Packet Transport Switches
only) Show information about the fan tray and fans.
all-members—(MX Series routers only) (Optional) Display information about the fan tray
and fans for all members of the Virtual Chassis configuration.
local—(MX Series routers only) (Optional) Display information about the fan tray and
fans for the local Virtual Chassis member.
Copyright © 2013, Juniper Networks, Inc.
431
PTX Series Packet Transport Switch Software Documentation
member member-id—(MX Series routers only) (Optional) Display information about the
fan tray and fans for the specified member of the Virtual Chassis configuration. For
an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.
interconnect-device name—(QFX3000-G QFabric systems only) (Optional) Display
information about the fan tray and fans for the specified QFX3008-I Interconnect
device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display information about the fan tray and fans for the specified T640 router (or
line-card chassis) that is connected to a TX Matrix router. On a TX Matrix Plus router,
display information about the fan tray and fans for the specified T1600 router (or
line-card chassis) that is connected to a TX Matrix Plus router. Replace number with
a value from 0 through 3.
scc —(TX Matrix router only) (Optional) Display information about the fan tray and fans
for the TX Matrix router (or switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display information about the fan
tray and fans for the TX Matrix Plus router (or switch-fabric chassis). Replace number
with 0.
Required Privilege
Level
List of Sample Output
Output Fields
view
show chassis fan on page 433
show chassis fan (QFabric Systems) on page 434
show chassis fan (EX Series Switches) on page 435
show chassis fan (T320 Router) on page 435
show chassis fan (T640 Router) on page 436
show chassis fan (T1600 Router) on page 436
show chassis fan (T4000 Core Router) on page 436
show chassis fan (TX Matrix Router) on page 437
show chassis fan (TX Matrix Plus Router) on page 438
show chassis fan (PTX5000 Packet Transport Switch) on page 439
show chassis fan (MX2010 Router) on page 439
show chassis fan (MX2020 Router) on page 440
show chassis fan (ACX4000 Router) on page 440
Table 31 on page 432 lists the output fields for the show chassis fan command. Output
fields are listed in the approximate order in which they appear.
Table 31: show chassis fan Output Fields
432
Field Name
Field Description
Item
Fan item identifier.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 31: show chassis fan Output Fields (continued)
Field Name
Field Description
Status
Status of the fan:
•
OK-Fan is running properly and within the normal range.
•
Check-Fan is in Check state because of some fault or alarm
condition.
RPM
(T Series routers, TX Matrix routers, TX Matrix Plus router, MX Series
3D Universal Edge Routers, QFX3108 Interconnect devices, and EX
Series switches only) Fan speed in revolutions per minute (RPM).
% RPM
(MX2010 routers, MX2020 routers, and PTX Series Packet Transport
Switches only) Percentage of the fan speed being used.
Measurement
(T Series routers, TX Matrix routers, TX Matrix Plus router, MX Series
3D Universal Edge Routers, QFX3108 Interconnect devices, and EX
Series switches only) Fan speed status based on different chassis
cooling requirements:
•
Spinning at high speed
•
Spinning at intermediate speed
•
Spinning at normal speed
•
Spinning at low speed (except EX Series switches)
(MX2010 routers, MX2020 routers, and PTX Series Packet Transport
Switches only) Fan speed in revolutions per minute (RPM) for each
fan in the fan tray.
Sample Output
show chassis fan
user@host> show chassis fan
user@host> show chassis fan
Item
Top Tray Fan 1
Top Tray Fan 2
Top Tray Fan 3
Top Tray Fan 4
Top Tray Fan 5
Top Tray Fan 6
Top Tray Fan 7
Top Tray Fan 8
Top Tray Fan 9
Top Tray Fan 10
Top Tray Fan 11
Top Tray Fan 12
Bottom Tray Fan 1
Bottom Tray Fan 2
Bottom Tray Fan 3
Bottom Tray Fan 4
Bottom Tray Fan 5
Bottom Tray Fan 6
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
RPM
3790
3769
3769
3790
3790
3769
3790
3769
3769
3790
3790
3769
2880
2912
2928
2896
2896
2928
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
433
PTX Series Packet Transport Switch Software Documentation
show chassis fan (QFabric Systems)
user@host> show chassis fan interconnect-device interconnect1
Item
TFT 0
TFT 0
TFT 0
TFT 0
TFT 0
TFT 0
BFT 1
BFT 1
BFT 1
BFT 1
BFT 1
BFT 1
SFT 0
SFT 0
SFT 0
SFT 0
SFT 0
SFT 0
SFT 0
SFT 0
SFT 1
SFT 1
SFT 1
SFT 1
SFT 1
SFT 1
SFT 1
SFT 1
SFT 2
SFT 2
SFT 2
SFT 2
SFT 2
SFT 2
SFT 2
SFT 2
SFT 3
SFT 3
SFT 3
SFT 3
SFT 3
SFT 3
SFT 3
SFT 3
SFT 4
SFT 4
SFT 4
SFT 4
SFT 4
SFT 4
SFT 4
SFT 4
SFT 5
SFT 5
SFT 5
SFT 5
434
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
0
1
2
3
4
5
0
1
2
3
4
5
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
RPM
2849
2821
2735
2815
2828
2863
2941
3008
3073
2925
2863
2933
15472
14477
15561
14210
16167
14248
16463
14099
15083
13533
16071
14400
15517
14210
16413
14400
15297
14634
15561
14285
15835
14400
15789
14323
16314
14876
15835
14323
16265
14594
16071
14323
15652
14438
16167
14555
16023
14361
16216
14438
15297
14173
15472
13846
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
SFT
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
2
2
3
3
0
0
1
1
2
2
3
3
0
0
1
1
2
2
3
3
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
Rotor
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
15340
13917
15835
13917
15743
14594
16167
14634
16167
14516
16666
14438
15517
14438
15517
14361
16167
14555
15697
14361
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
RPM
3477
3477
3479
3508
3517
3531
3439
3424
3413
3439
3446
3432
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
RPM
2850
2820
2970
2790
2640
2790
2520
2610
2550
2610
2880
2790
2130
2190
2250
2220
2280
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
show chassis fan (EX Series Switches)
user@host> show chassis fan
Item
Fan 1
Fan 2
Fan 3
Fan 4
Fan 5
Fan 6
Fan 7
Fan 8
Fan 9
Fan 10
Fan 11
Fan 12
show chassis fan (T320 Router)
user@host> show chassis fan
Item
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Middle fan
Rear Tray Fourth fan
Rear Tray Bottom fan
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
435
PTX Series Packet Transport Switch Software Documentation
show chassis fan (T640 Router)
user@host> show chassis fan
Item
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
RPM
3420
3420
3420
3420
3420
3450
3390
3420
3390
3390
3390
3390
5220
5220
5220
5220
5220
5220
5220
5220
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
RPM
3420
3420
3450
3420
3420
3390
3420
3420
3390
3390
3420
3390
5190
5190
5190
5190
5190
5190
5190
5190
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
Spinning at
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
RPM
5190
5220
5190
5160
Measurement
Spinning at
Spinning at
Spinning at
Spinning at
high
high
high
high
show chassis fan (T1600 Router)
user@host> show chassis fan
Item
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
show chassis fan (T4000 Core Router)
user@host> show chassis fan
Item
Top Left Front fan
Top Left Middle fan
Top Left Rear fan
Top Right Front fan
436
Status
OK
OK
OK
OK
speed
speed
speed
speed
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Top Right Middle fan
Top Right Rear fan
Bottom Left Front fan
Bottom Left Middle fan
Bottom Left Rear fan
Bottom Right Front fan
Bottom Right Middle fan
Bottom Right Rear fan
Rear Tray Top fan
Rear Tray Second fan
Rear Tray Third fan
Rear Tray Fourth fan
Rear Tray Fifth fan
Rear Tray Sixth fan
Rear Tray Seventh fan
Rear Tray Bottom fan
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
5190
5160
6030
6090
6090
6030
6060
6060
10000
10000
10000
10000
10000
10000
10000
10000
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
at
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
high
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
speed
show chassis fan (TX Matrix Router)
user@host> show chassis fan
scc-re0:
-------------------------------------------------------------------------Item
Status
RPM
Measurement
Top Left Front fan
OK
3420
Spinning at normal speed
Top Left Middle fan
OK
3390
Spinning at normal speed
Top Left Rear fan
OK
3420
Spinning at normal speed
Top Right Front fan
OK
3390
Spinning at normal speed
Top Right Middle fan
OK
3420
Spinning at normal speed
Top Right Rear fan
OK
3390
Spinning at normal speed
Bottom Left Front fan
OK
3420
Spinning at normal speed
Bottom Left Middle fan
OK
3450
Spinning at normal speed
Bottom Left Rear fan
OK
3420
Spinning at normal speed
Bottom Right Front fan
OK
3420
Spinning at normal speed
Bottom Right Middle fan
OK
3420
Spinning at normal speed
Bottom Right Rear fan
OK
3420
Spinning at normal speed
Rear Tray Top fan
OK
3420
Spinning at normal speed
Rear Tray Second fan
OK
5190
Spinning at normal speed
Rear Tray Third fan
OK
5190
Spinning at normal speed
Rear Tray Fourth fan
OK
5190
Spinning at normal speed
Rear Tray Fifth fan
OK
3420
Spinning at normal speed
Rear Tray Sixth fan
OK
3420
Spinning at normal speed
Rear Tray Seventh fan
OK
3420
Spinning at normal speed
Rear Tray Bottom fan
OK
3420
Spinning at normal speed
lcc2-re0:
-------------------------------------------------------------------------Item
Status
RPM
Measurement
Top Left Front fan
OK
3420
Spinning at normal speed
Top Left Middle fan
OK
3420
Spinning at normal speed
Top Left Rear fan
OK
3450
Spinning at normal speed
Top Right Front fan
OK
3420
Spinning at normal speed
Top Right Middle fan
OK
3450
Spinning at normal speed
Top Right Rear fan
OK
3360
Spinning at normal speed
Bottom Left Front fan
OK
3420
Spinning at normal speed
Bottom Left Middle fan
OK
3480
Spinning at normal speed
Bottom Left Rear fan
OK
3420
Spinning at normal speed
Bottom Right Front fan
OK
3420
Spinning at normal speed
Bottom Right Middle fan
OK
3390
Spinning at normal speed
Bottom Right Rear fan
OK
3420
Spinning at normal speed
Rear Tray Top fan
OK
3420
Spinning at normal speed
Rear Tray Second fan
OK
3420
Spinning at normal speed
Copyright © 2013, Juniper Networks, Inc.
437
PTX Series Packet Transport Switch Software Documentation
Rear
Rear
Rear
Rear
Rear
Rear
Tray
Tray
Tray
Tray
Tray
Tray
Third fan
Fourth fan
Fifth fan
Sixth fan
Seventh fan
Bottom fan
OK
OK
OK
OK
OK
OK
3420
3420
3420
3420
3420
3420
Spinning
Spinning
Spinning
Spinning
Spinning
Spinning
at
at
at
at
at
at
normal
normal
normal
normal
normal
normal
speed
speed
speed
speed
speed
speed
show chassis fan (TX Matrix Plus Router)
user@host> show chassis fan
sfc0-re0:
-------------------------------------------------------------------------Item
Status
RPM
Measurement
Fan Tray 0 Fan 1
OK
4350
Spinning at normal speed
Fan Tray 0 Fan 2
OK
4380
Spinning at normal speed
Fan Tray 0 Fan 3
OK
4410
Spinning at normal speed
Fan Tray 0 Fan 4
OK
4380
Spinning at normal speed
Fan Tray 0 Fan 5
OK
4350
Spinning at normal speed
Fan Tray 0 Fan 6
OK
4380
Spinning at normal speed
Fan Tray 1 Fan 1
OK
4410
Spinning at normal speed
Fan Tray 1 Fan 2
OK
4380
Spinning at normal speed
Fan Tray 1 Fan 3
OK
4410
Spinning at normal speed
Fan Tray 1 Fan 4
OK
4380
Spinning at normal speed
Fan Tray 1 Fan 5
OK
4410
Spinning at normal speed
Fan Tray 1 Fan 6
OK
4410
Spinning at normal speed
Fan Tray 2 Fan 1
OK
4380
Spinning at normal speed
Fan Tray 2 Fan 2
OK
4380
Spinning at normal speed
Fan Tray 2 Fan 3
OK
4380
Spinning at normal speed
Fan Tray 2 Fan 4
OK
4410
Spinning at normal speed
Fan Tray 2 Fan 5
OK
4380
Spinning at normal speed
Fan Tray 2 Fan 6
OK
4410
Spinning at normal speed
Fan Tray 2 Fan 7
OK
4410
Spinning at normal speed
Fan Tray 2 Fan 8
OK
4380
Spinning at normal speed
Fan Tray 2 Fan 9
OK
4380
Spinning at normal speed
Fan Tray 3 Fan 1
OK
4350
Spinning at normal speed
Fan Tray 3 Fan 2
OK
4380
Spinning at normal speed
Fan Tray 3 Fan 3
OK
4410
Spinning at normal speed
Fan Tray 3 Fan 4
OK
4440
Spinning at normal speed
Fan Tray 3 Fan 5
OK
4380
Spinning at normal speed
Fan Tray 3 Fan 6
OK
4410
Spinning at normal speed
Fan Tray 3 Fan 7
OK
4410
Spinning at normal speed
Fan Tray 3 Fan 8
OK
4380
Spinning at normal speed
Fan Tray 3 Fan 9
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 1
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 2
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 3
OK
4380
Spinning at normal speed
Fan Tray 4 Fan 4
OK
4380
Spinning at normal speed
Fan Tray 4 Fan 5
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 6
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 7
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 8
OK
4410
Spinning at normal speed
Fan Tray 4 Fan 9
OK
4410
Spinning at normal speed
Fan Tray 5 Fan 1
OK
4350
Spinning at normal speed
Fan Tray 5 Fan 2
OK
4380
Spinning at normal speed
Fan Tray 5 Fan 3
OK
4380
Spinning at normal speed
Fan Tray 5 Fan 4
OK
4350
Spinning at normal speed
Fan Tray 5 Fan 5
OK
4380
Spinning at normal speed
Fan Tray 5 Fan 6
OK
4410
Spinning at normal speed
Fan Tray 5 Fan 7
OK
4410
Spinning at normal speed
Fan Tray 5 Fan 8
OK
4380
Spinning at normal speed
Fan Tray 5 Fan 9
OK
4410
Spinning at normal speed
438
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
lcc0-re0:
-------------------------------------------------------------------------Item
Status
RPM
Measurement
Top Left Front fan
OK
3420
Spinning at normal speed
Top Left Middle fan
OK
3420
Spinning at normal speed
Top Left Rear fan
OK
3420
Spinning at normal speed
Top Right Front fan
OK
3450
Spinning at normal speed
Top Right Middle fan
OK
3420
Spinning at normal speed
Top Right Rear fan
OK
3420
Spinning at normal speed
Bottom Left Front fan
OK
3420
Spinning at normal speed
Bottom Left Middle fan
OK
3420
Spinning at normal speed
Bottom Left Rear fan
OK
3390
Spinning at normal speed
Bottom Right Front fan
OK
3420
Spinning at normal speed
Bottom Right Middle fan
OK
3390
Spinning at normal speed
Bottom Right Rear fan
OK
3390
Spinning at normal speed
Rear Tray Top fan
OK
7050
Spinning at normal speed
Rear Tray Second fan
OK
7050
Spinning at normal speed
Rear Tray Third fan
OK
7050
Spinning at normal speed
Rear Tray Fourth fan
OK
7050
Spinning at normal speed
Rear Tray Fifth fan
OK
7050
Spinning at normal speed
Rear Tray Sixth fan
OK
7050
Spinning at normal speed
Rear Tray Seventh fan
OK
7050
Spinning at normal speed
Rear Tray Bottom fan
OK
7050
Spinning at normal speed
show chassis fan (PTX5000 Packet Transport Switch)
user@host> show chassis fan
user@host> show chassis fan
Item
Fan Tray 0 Fan 1
Fan Tray 0 Fan 2
Fan Tray 0 Fan 3
Fan Tray 0 Fan 4
Fan Tray 0 Fan 5
Fan Tray 0 Fan 6
Fan Tray 0 Fan 7
Fan Tray 0 Fan 8
Fan Tray 0 Fan 9
Fan Tray 0 Fan 10
Fan Tray 0 Fan 11
Fan Tray 0 Fan 12
Fan Tray 0 Fan 13
Fan Tray 0 Fan 14
Fan Tray 1 Fan 1
Fan Tray 1 Fan 2
Fan Tray 1 Fan 3
Fan Tray 1 Fan 4
Fan Tray 1 Fan 5
Fan Tray 1 Fan 6
Fan Tray 2 Fan 1
Fan Tray 2 Fan 2
Fan Tray 2 Fan 3
Fan Tray 2 Fan 4
Fan Tray 2 Fan 5
Fan Tray 2 Fan 6
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
% RPM
29%
29%
29%
29%
30%
30%
29%
30%
30%
30%
30%
30%
31%
30%
42%
42%
43%
43%
45%
43%
29%
30%
30%
33%
29%
32%
Measurement
2700 RPM
2700 RPM
2742 RPM
2700 RPM
2828 RPM
2828 RPM
2700 RPM
2785 RPM
2828 RPM
2828 RPM
2785 RPM
2828 RPM
2871 RPM
2828 RPM
3033 RPM
3066 RPM
3099 RPM
3166 RPM
3266 RPM
3133 RPM
2099 RPM
2199 RPM
2166 RPM
2399 RPM
2133 RPM
2366 RPM
show chassis fan (MX2010 Router)
user@host > show chassis fan
Copyright © 2013, Juniper Networks, Inc.
439
PTX Series Packet Transport Switch Software Documentation
Item
Status
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
Tray
0
0
0
0
0
0
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
Fan
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
% RPM
Measurement
3360 RPM
3480 RPM
3360 RPM
3360 RPM
3480 RPM
3360 RPM
3480 RPM
3600 RPM
3480 RPM
3480 RPM
3480 RPM
3480 RPM
3480 RPM
3720 RPM
3480 RPM
3480 RPM
3480 RPM
3480 RPM
3480 RPM
3600 RPM
3600 RPM
3600 RPM
3600 RPM
3480 RPM
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
37%
38%
37%
37%
38%
37%
38%
40%
38%
38%
38%
38%
38%
41%
38%
38%
38%
38%
38%
40%
40%
40%
40%
38%
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
% RPM
37%
37%
36%
37%
37%
37%
37%
37%
37%
37%
37%
36%
37%
37%
37%
37%
37%
38%
38%
38%
38%
37%
37%
37%
show chassis fan (MX2020 Router)
user@host > show chassis fan
Item
Fan Tray 0 Fan 1
Fan Tray 0 Fan 2
Fan Tray 0 Fan 3
Fan Tray 0 Fan 4
Fan Tray 0 Fan 5
Fan Tray 0 Fan 6
Fan Tray 1 Fan 1
Fan Tray 1 Fan 2
Fan Tray 1 Fan 3
Fan Tray 1 Fan 4
Fan Tray 1 Fan 5
Fan Tray 1 Fan 6
Fan Tray 2 Fan 1
Fan Tray 2 Fan 2
Fan Tray 2 Fan 3
Fan Tray 2 Fan 4
Fan Tray 2 Fan 5
Fan Tray 2 Fan 6
Fan Tray 3 Fan 1
Fan Tray 3 Fan 2
Fan Tray 3 Fan 3
Fan Tray 3 Fan 4
Fan Tray 3 Fan 5
Fan Tray 3 Fan 6
Measurement
3360 RPM
3360 RPM
3240 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3240 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3360 RPM
3480 RPM
3480 RPM
3480 RPM
3480 RPM
3360 RPM
3360 RPM
3360 RPM
show chassis fan (ACX4000 Router)
user@host > show chassis fan
440
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Item
Fan 1
Fan 2
Copyright © 2013, Juniper Networks, Inc.
Status
OK
OK
RPM
4140
4200
Measurement
Spinning at normal speed
Spinning at normal speed
441
PTX Series Packet Transport Switch Software Documentation
show chassis fpc
Syntax
Syntax (EX Series
Switches)
Syntax (T4000
Routers)
show chassis fpc
<detail <slot>> | <pic-status <slot>>
show chassis fpc
<detail <fpc-slot>> | <pic-status <fpc-slot>>
<fpc-slot>
show chassis fpc
<detail <fpc-slot>>
<pic-status <fpc-slot>>
Syntax (TX Matrix and
TX Matrix Plus
Routers)
show chassis fpc
<detail <fpc-slot>> | <pic-status <fpc-slot>>
<slot>
Syntax (MX Series
Routers and EX Series
switches)
show chassis fpc
<detail <slot>> | <pic-status <slot>>
<all-members>
<local>
<member member-id>
Syntax (MX2010 and
MX2020 3D Universal
Edge Routers)
show chassis fpc
<slot> detail | <detail <slot>> | <pic-status <slot>>
<fpc-slot>
Syntax (QFX Series)
show chassis fpc
<detail>
<interconnect-device name <fpc-slot fpc-slot>>
<node-device name>
Syntax (PTX Series
Packet Transport
Switches)
show chassis fpc
<detail <fpc-slot>> | <pic-status <fpc-slot>>
<fpc-slot>
Syntax (ACX Series
Universal Access
Routers)
show chassis fpc
<detail <fpc-slot>> | <pic-status <fpc-slot>>
<fpc-slot>
Release Information
Description
442
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Display status information about the installed Flexible PIC Concentrators (FPCs)and
PICs.
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Options
none—Display status information for all FPCs. On a TX Matrix router, display status
information for all FPCs on the attached T640 routers in the routing matrix. On a TX
Matrix Plus router, display status information for all FPCs on the attached T1600
routers in the routing matrix.
NOTE: In EX8200 switches, line cards initialize Packet Forwarding Engine
during startup. If an error occurs during hardware initialization, the FPCs
with bad hardware parts power down after transferring the debug
information to the Routing Engine. The Routing Engine marks the FPC
offline, logs the error in system log messages (/var/log/messages), and
generates an alarm to inform the user.
See the following sample output:
user@host> show chassis fpc
Temp CPU Utilization (%)
Utilization (%)
Slot State
(C) Total Interrupt
Buffer
0 Empty
1 Empty
2 Empty
3 Empty
4 Empty
5 Offline
---Hard FPC error--6 Empty
7 Online
26
4
0
32
Memory
DRAM (MB) Heap
1024
0
The following sample output shows the alarm raised for the failed FPCs.
user@host > show chassis alarms
4 alarms currently active
Alarm time
Class
2011-03-24 00:52:51 UTC Major
2011-03-24 00:52:31 UTC Major
2011-03-24 00:52:31 UTC Major
2011-03-24 00:51:26 UTC Minor
RE
Copyright © 2013, Juniper Networks, Inc.
Description
FPC 5 Hard errors
Fan Tray Failure
Fan Tray Failure
Loss of communication with Backup
443
PTX Series Packet Transport Switch Software Documentation
NOTE: On T4000 routers, when you include the enhanced-mode
statement at the [edit chassis network-services] hierarchy level and reboot
the system, only the T4000 Type 5 FPCs present on the router become
online while the remaining FPCs are offline, and FPC misconfiguration
alarms are generated. The show chassis alarm command output displays
FPC misconfiguration (FPC fpc-slot misconfig) as the reason for the
generation the alarms.
The following sample output shows the FPC status after the
enhanced-mode statement is configured on the T4000 router. The T4000
Type 5 FPC present in slot 5 becomes online while the remaining FPCs
are offline.
user@host> show chassis fpc
Temp CPU Utilization (%)
Utilization (%)
Slot State
(C) Total Interrupt
Buffer
0 offline
---FPC misconfiguration--1 offline
---FPC misconfiguration--2 offline
---FPC misconfiguration--3 Empty
4 Empty
5 Online
66
50
0
27
Memory
DRAM (MB) Heap
2816
29
The following sample output shows FPC misconfiguration alarms.
user@host > show chassis alarms
3 alarms currently active
Alarm time
Class
2011-03-24 00:52:51 PST Major
2011-03-24 00:52:31 PST Major
2011-03-24 00:52:31 PST Major
Description
FPC 1 misconfig
FPC 2 misconfig
FPC 3 misconfig
detail—(Optional) Display detailed status information for all FPCs or for the FPC in the
specified slot (see fpc-slot or slot).
all-members—(MX Series routers and EX Series switches only) (Optional) Display status
information for all FPCs on all members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display status information
for all FPCs on the Interconnect device.
fpc-slot—(Optional) FPC slot number:
•
444
(TX Matrix and TX Matrix Plus router only—On a TX Matrix router, if you specify
the number of the T640 router (or line-card chassis) by using the lcc number option
(the recommended method), replace fpc-slot with a value from 0 through 7.
Otherwise, replace fpc-slot with a value from 0 through 31. Likewise, on a TX Matrix
Plus router, if you specify the number of the T1600 router (or line-card chassis)
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
by using the lcc number option (the recommended method), replace fpc-slot with
a value from 0 through 7. Otherwise, replace fpc-slot with a value from 0 through
31. For example, the following commands have the same result:
user@host> show chassis fpc detail 1 lcc 1
user@host> show chassis fpc detail 9
•
M120 router—Replace fpc-slot with a value from 0 through 5.
•
MX80 router—Replace fpc-slot with a value from 0 through 1.
•
MX240 router—Replace fpc-slot with a value from 0 through 2.
•
MX480 router—Replace fpc-slot with a value from 0 through 5.
•
MX-960 router—Replace fpc-slot with a value from 0 through 11.
•
MX2010 router—Replace fpc-slot-number with a value from 0 through 9.
•
MX2020 router—Replace fpc-slot-number with a value from 0 through 19.
•
Other routers—Replace fpc-slot with a value from 0 through 7.
•
EX Series switches:
•
•
•
EX3200 switches and EX4200 standalone switches—Replace fpc-slot with 0.
•
EX4200 switches in a Virtual Chassis configuration—Replace fpc-slot with a
value from 0 through 9.
•
EX6210 switches—Replace fpc-slot with a value from 0 through 9.
•
EX8208 switches—Replace fpc-slot with a value from 0 through 7.
•
EX8216 switches—Replace fpc-slot with a value from 0 through 15.
QFX Series:
•
QFX3500 switches—Replace fpc-slot with 0.
•
QFabric systems—Replace fpc-slot with 0 through 31 on the Interconnect device.
PTX Series Packet Transport Switches:
•
•
PTX5000 Packet Transport Switch—Replace fpc-slot with a value from 0 through
7.
ACX Series Universal Access Routers:
•
ACX1000 and ACX2000 Universal Access Routers—Replace fpc-slot with 0.
local—(MX Series routers and EX Series switches only) (Optional) Display status
information for all FPCs on the local Virtual Chassis member.
member member-id—(MX Series routers and EX Series switches only) (Optional) Display
status information for all FPCs on the specified member of the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
node-device name—(QFabric systems only) (Optional) Display status information for
each Node device. Each Node device is equivalent to an FPC.
Copyright © 2013, Juniper Networks, Inc.
445
PTX Series Packet Transport Switch Software Documentation
pic-status—(Optional) Display status information for all PICs or for the PIC in the specified
slot (see fpc-slot).
NOTE: On T1600 routers, Type 4 FPCs with ASICs based on the SL2.0
chipset do not support the 10-Gigabit Ethernet LAN/WAN PIC with SFP+
(10x10GE [LAN/WAN] SFPP). If you issue the show chassis fpc command
with the pic-status option, the CLI displays the string “Not Supported”
for 10x10GE(LAN/WAN) SFPP PICs installed on such FPCs. The following
is a sample output:
user@host> show chassis fpc pic-status
Slot 0
Online
E2-FPC Type 1
PIC 0 Online
1x G/E SFP, 1000 BASE
PIC 1 Online
Adaptive Services-II
PIC 2 Online
1x G/E IQ, 1000 BASE
PIC 3 Online
1x G/E IQ, 1000 BASE
Slot 1
Online
FPC Type 3-ES
PIC 0 Present
UNUSED- Not Supported
Slot 2
Online
FPC Type 4-ES
PIC 0 Offline
4x OC-192 SONET XFP
PIC 1 Present
10x10GE(LAN/WAN) SFPP- Not Supported
<<<<<<
Slot 4
Offline
FPC Type 1-ES
Slot 5
Offline
FPC Type 2-ES
Slot 6
Online
E2-FPC Type 3
PIC 0 Online
1x OC-192 SONET XFP
PIC 1 Online
4x OC-48 SONET
PIC 2 Online
4x OC-48 SONET
PIC 3 Online
MultiServices 500
Slot 7
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
PIC 1 Online
4x 10GE (LAN/WAN) XFP
In addition, an entry is logged in the system log messages
(/var/log/messages) that the PIC is not supported. The following is a
sample message logged in the system log:
Apr 5 08:47:36 router1 chassisd[2770]: CHASSISD_UNSUPPORTED_PIC:
PIC 1 in FPC 2 (type 763, version 257) is not supported
lcc number—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
display status information for a T640 router (or line-card chassis) that is connected
to the TX Matrix router. On a TX Matrix Plus router, display status information for a
T1600 router (or line-card chassis) that is connected to the TX Matrix Plus router.
Replace number with a value from 0 through 3.
Required Privilege
Level
Related
Documentation
446
view
•
request chassis fpc on page 156
•
show chassis fpc-feb-connectivity
•
show chassis fabric fpcs on page 373
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
List of Sample Output
•
Configuring the Junos OS to Resynchronize FPC Sequence Numbers with Active FPCs
when an FPC Comes Online
•
MX960 Flexible PIC Concentrator Description
•
ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping
•
enhanced-mode
show chassis fpc (EX6210 Switch) on page 450
show chassis fpc (M10 Router) on page 450
show chassis fpc (M20 Router) on page 450
show chassis fpc detail (M Series Routers) on page 450
show chassis fpc detail (MX80 Router) on page 451
show chassis fpc (MX240 Router) on page 451
show chassis fpc (EX Series Switch) on page 451
show chassis fpc (MX480 Router) on page 451
show chassis fpc (MX480 Router with 100-Gigabit Ethernet CFP) on page 451
show chassis fpc pic-status (MX480 Router with 100-Gigabit Ethernet CFP) on page 452
show chassis fpc pic-status (EX Series Switch) on page 452
show chassis fpc (MX480 Router with MPC4E) on page 452
show chassis fpc detail (MX480 Router with MPC4E) on page 452
show chassis fpc pic-status (MX480 Router with MPC4E) on page 453
show chassis fpc (MX960 Router) on page 453
show chassis fpc (MX240, MX480, MX960 Routers with Application Services Modular
Line Card on page 453
show chassis fpc (MX240, MX480, MX960 with Application Services Modular Line
Card on page 454
show chassis fpc (MX2010 Router) on page 454
show chassis fpc (MX2020 Router) on page 454
show chassis fpc (MX2020 Router with MPC4E) on page 454
show chassis fpc detail (MX2020 Router with MPC4E) on page 455
show chassis fpc pic-status (MX2020 Router with MPC4E) on page 456
show chassis fpc detail (MX Series Routers) on page 456
show chassis fpc detail (EX Series Switches) on page 456
show chassis fpc (Hardware Not Supported) on page 457
show chassis fpc detail (Hardware Not Supported) on page 457
show chassis fpc pic-status on page 457
show chassis fpc pic-status (M Series Routers) on page 457
show chassis fpc pic-status (M120 Router) on page 458
show chassis fpc pic-status (MX240, MX480, and MX960 Routers with Application
Services Modular Line Card) on page 458
show chassis fpc lcc (TX Matrix Router) on page 458
show chassis fpc pic-status (TX Matrix Router) on page 459
show chassis fpc pic-status lcc (TX Matrix Router) on page 459
show chassis fpc (TX Matrix Plus Router) on page 459
show chassis fpc lcc (TX Matrix Plus Router) on page 460
show chassis fpc detail (TX Matrix Plus Router) on page 460
show chassis fpc pic-status (TX Matrix Plus Router) on page 463
show chassis fpc (T1600 Router) on page 463
Copyright © 2013, Juniper Networks, Inc.
447
PTX Series Packet Transport Switch Software Documentation
show chassis fpc detail (T1600 Router) on page 464
show chassis fpc <fpc-slot> (EX Series Switch) on page 464
show chassis fpc slot (T1600 Router) on page 464
show chassis fpc pic-status (T1600 Router) on page 465
show chassis fpc (T4000 Router) on page 465
show chassis fpc detail (T4000 Router) on page 465
show chassis fpc pic-status (T4000 Router) on page 466
show chassis fpc (QFX Series) on page 466
show chassis fpc detail (QFX3500 Switches) on page 466
show chassis fpc pic-status (QFX3500 Switches) on page 466
show chassis fpc interconnect-device (QFabric System) on page 466
show chassis fpc interconnect-device (QFabric System) on page 467
show chassis fpc interconnect-device detail (QFabric System) on page 467
show chassis fpc pic-status interconnect-device (QFabric System) on page 467
show chassis fpc pic-status node-device (QFabric System) on page 468
show chassis fpc (PTX5000 Packet Transport Switch) on page 468
show chassis fpc detail (PTX5000 Packet Transport Switch) on page 468
show chassis fpc pic-status (PTX5000 Packet Transport Switch) on page 469
show chassis fpc (ACX2000 Universal Access Router) on page 469
show chassis fpc 0 (ACX2000 Universal Access Router) on page 469
show chassis fpc detail (ACX2000 Universal Access Router) on page 470
show chassis fpc pic-status (ACX2000 Universal Access Router) on page 470
show chassis FPC 1 (MX Routers with Media Services Blade [MSB]) on page 470
show chassis FPC 1 detail (MX Routers with Media Services Blade [MSB]) on page 470
Output Fields
Table 32 on page 448 lists the output fields for the show chassis fpc command. Output
fields are listed in the approximate order in which they appear.
Table 32: show chassis fpc Output Fields
Field Name
Field Description
Level of Output
Slot or Slot State
Slot number and state. The state can be one of the following conditions:
all levels
•
Dead—Held in reset because of errors.
•
Diag—Slot is being ignored while the FPC is running diagnostics.
•
Dormant—Held in reset.
•
Empty—No FPC is present.
•
Offline—(PTX Series Packet Transport Switches only) One of the following
two states is displayed:
•
FPC offlined due to unreachable destinations
•
FPC Offlined due to degraded FPC action
•
Online—FPC is online and running.
•
Present—FPC is detected by the chassis daemon but either is not supported
by the current version of Junos OS or is inserted in the wrong slot. The output
also states either Hardware Not Supported or Hardware Not In Right Slot. The
FPC is coming up but not yet online.
Logical slot
448
•
Probed—Probe is complete; awaiting restart of the Packet Forwarding Engine.
•
Probe-wait—Waiting to be probed.
Slot number.
all levels
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 32: show chassis fpc Output Fields (continued)
Field Name
Field Description
Level of Output
Temp (C) or
Temperature
Temperature of the air passing by the FPC, in degrees Celsius or in both Celsius
and Fahrenheit.
all levels
all levels
Temperature (PTX
Series)
On PTX Series Packet Transport Switches, temperature details are provided in
degrees Celsius and Fahrenheit. Output includes:
•
Temperature (PMB)—Temperature of the air passing by the Processor
Mezzanine Board (PMB) at the bottom of the FPC.
•
Temperature (Intake)—Temperature of the air flowing into the chassis.
•
Temperature (Exhaust)—Exhaust temperatures for multiple zones (Exhaust
A and Exhaust B).
•
Temperature (TLn)-–Temperature of the specified Lookup ASIC (TL) of the
packet forwarding engine on the FPC.
•
Temperature (TQn)-–Temperature of the specified Queuing and Memory
Interface ASIC (TQ) of the packet forwarding engine on the FPC.
detail
Total CPU
Utilization (%)
Total percentage of CPU being used by the FPC's processor.
all levels
Interrupt CPU
Utilization (%)
Of the total CPU being used by the FPC's processor, the percentage being used
for interrupts.
none specified
Memory DRAM
(MB)
Total DRAM, in megabytes, available to the FPC's processor.
none specified
Heap Utilization
(%)
Percentage of heap space (dynamic memory) being used by the FPC's processor.
If this number exceeds 80 percent, there may be a software problem (memory
leak).
none specified
NOTE: On MX Series routers and EX Series switches in a broadband edge
environment, heap utilization levels higher than 70 percent can affect unified
ISSU, router stability, or scaling capability.
Buffer Utilization
(%)
Percentage of buffer space being used by the FPC's processor for buffering
internal messages.
none specified
Total CPU DRAM
Amount of DRAM available to the FPC's CPU.
detail
Total RLDRAM
Amount of reduced latency dynamic random access memory (RLDRAM)
available to the FPC CPU.
detail
Total DDR DRAM
Amount of double data rate dynamic random access memory (DDR DRAM)
available to the FPC CPU.
detail
Total SRAM
Amount of static RAM (SRAM) used by the FPC's CPU.
detail
Total SDRAM
Total amount of memory used for storing packets and notifications.
detail
I/O Manager ASICs
information
I/O Manager version number, manufacturer, and part number.
detail
Copyright © 2013, Juniper Networks, Inc.
449
PTX Series Packet Transport Switch Software Documentation
Table 32: show chassis fpc Output Fields (continued)
Field Name
Field Description
Level of Output
Start time
Time when the Routing Engine detected that the FPC was running.
detail
Uptime
How long the Routing Engine has been connected to the FPC and, therefore,
how long the FPC has been up and running.
detail
PIC type
(pic-status output only) Type of PIC.
none specified
Sample Output
show chassis fpc (EX6210 Switch)
user@switch> show chassis fpc
Temp CPU Utilization (%)
Slot State
(C) Total Interrupt
0 Empty
1 Online
7
5
0
2 Empty
3 Empty
4 Online
25
17
2
5 Online
25
3
0
6 Online
6
5
0
7 Empty
8 Empty
9 Online
8
7
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
1024
0
32
2048
2048
1024
0
0
0
30
24
32
1024
0
32
show chassis fpc (M10 Router)
user@host> show chassis fpc
FPC status:
Temp
Slot State
(C)
0 Online
27
1 Online
28
show chassis fpc (M20 Router)
user@host> show chassis fpc
FPC status:
Temp CPU Utilization (%)
Slot State
(C) Total Interrupt
0 Empty
0
0
0
1 Online
38
0
0
2 Online
35
0
0
3 Empty
0
0
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
0
0
0
8
0
4
8
0
3
0
0
0
show chassis fpc detail (M Series Routers)
user@host> show chassis fpc detail 1
Slot 1 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
I/O Manager ASICs information
450
48
32
4
256
Online
degrees C
MB
MB
MB
Version 2.0, Foundry IBM, Part number 0
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
I/O Manager ASICs information
Start time
Uptime
Version 2.0, Foundry IBM, Part number 0
2000-02-08 02:18:49 UTC
14 hours, 41 minutes, 41 seconds
show chassis fpc detail (MX80 Router)
user@host> show chassis fpc detail
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 1 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
47
1024
331
1280
47
1024
331
1280
Online
degrees C / 116 degrees F
MB
MB
MB
2010-02-08 12:25:33 PST
2 hours, 13 minutes, 19 seconds
Online
degrees C / 116 degrees F
MB
MB
MB
2010-02-08 12:25:33 PST
2 hours, 13 minutes, 19 seconds
show chassis fpc (MX240 Router)
user@host> show chassis fpc
Temp
CPU Utilization (%)
Slot State
(C) Total Interrupt
0 Empty
1 Online
34
6
0
2 Online
33
9
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
1024
1024
18
24
30
30
show chassis fpc (EX Series Switch)
user@host> show chassis fpc
Temp
Slot State
(C)
0 Empty
1 Online
41
2 Online
42
CPU Utilization (%)
Total Interrupt
13
12
0
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
2048
2048
19
19
14
14
show chassis fpc (MX480 Router)
user@host> show chassis fpc
Temp
Slot State
(C)
0 Empty
1 Online
36
2 Empty
3 Empty
4 Empty
5 Empty
CPU Utilization (%)
Total Interrupt
9
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
1024
17
57
show chassis fpc (MX480 Router with 100-Gigabit Ethernet CFP)
user@host> show chassis fpc
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Online
33
4
0
2048
10
13
1 Online
36
7
0
2048
16
13
2 Online
29
6
0
1024
27
29
Copyright © 2013, Juniper Networks, Inc.
451
PTX Series Packet Transport Switch Software Documentation
3
4
5
Online
Online
Online
33
36
34
0
7
31
0
0
11
0
2048
2048
0
19
14
0
13
13
show chassis fpc pic-status (MX480 Router with 100-Gigabit Ethernet CFP)
user@host> show chassis fpc pic-status
Slot 1
Online
MPC Type 3
PIC 2 Online
1X100GE CFP
Slot 2 Online
DPCE 40x 1GE R EQ
PIC 0 Online
10x 1GE(LAN) EQ
PIC 1 Online
10x 1GE(LAN) EQ
PIC 2 Online
10x 1GE(LAN) EQ
PIC 3 Online
10x 1GE(LAN) EQ
Slot 3 Online
MPC Type 3
PIC 0 Online
1X100GE CFP
PIC 2 Online
1X100GE CFP
Slot 4 Online
MPC Type 3
PIC 0 Online
1X100GE CFP
PIC 2 Online
1X100GE CFP
Slot 5 Online
MPC Type 2 3D EQ
PIC 0 Online
2x 10GE XFP
PIC 1 Online
2x 10GE XFP
PIC 2 Online
10x 1GE(LAN) SFP
PIC 3 Online
10x 1GE(LAN) SFP
show chassis fpc pic-status (EX Series Switch)
user@host> show chassis fpc pic-status
Slot 1
Online
EX9200 32x10G SFP
PIC 0 Online
8X10GE SFPP
PIC 1 Online
8X10GE SFPP
PIC 2 Online
8X10GE SFPP
PIC 3 Online
8X10GE SFPP
Slot 2
Online
EX9200 32x10G SFP
PIC 0 Online
8X10GE SFPP
PIC 1 Online
8X10GE SFPP
PIC 2 Online
8X10GE SFPP
PIC 3 Online
8X10GE SFPP
show chassis fpc (MX480 Router with MPC4E)
user@host> show chassis fpc
Temp CPU Utilization (%)
Slot State
(C) Total
0 Empty
1 Empty
2 Online
38
7
3 Online
39
8
4 Online
39
7
5 Empty
Memory
Interrupt
0
0
0
Utilization (%)
DRAM (MB) Heap
2048
2048
2048
19
18
17
Buffer
14
14
14
show chassis fpc detail (MX480 Router with MPC4E)
user@host> show chassis fpc detail
Slot 2 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
452
Online
38
2048 MB
1036 MB
11264 MB
2013-02-18 05:06:57 PST
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Uptime:
Max Power Consumption
Slot 3 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 4 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Max Power Consumption
17 hours, 41 minutes, 9 seconds
610 Watts
Online
38
2048 MB
1036 MB
11264 MB
2013-02-18 05:07:00 PST
17 hours, 41 minutes, 6 seconds
610 Watts
Diagnostics
37
0
0
0
520
MB
MB
MB
Watts
show chassis fpc pic-status (MX480 Router with MPC4E)
user@host> show chassis fpc pic-status
Slot 2
Online
MPC4E 3D 32XGE
PIC 0 Online
8X10GE SFPP
PIC 1 Online
8X10GE SFPP
PIC 2 Online
8X10GE SFPP
PIC 3 Online
8X10GE SFPP
Slot 3
Online
MPC4E 3D 2CGE+8XGE
PIC 0 Online
4x10GE SFPP
PIC 1 Online
1X100GE CFP
PIC 2 Online
4x10GE SFPP
PIC 3 Online
1X100GE CFP
Slot 4
Diagnostics MPCE Type 3 3D
show chassis fpc (MX960 Router)
user@host> show chassis fpc
Temp CPU Utilization (%)
Memory
Slot State
(C) Total Interrupt
DRAM (MB) Heap
0 Empty
1 Empty
2 Empty
3 Online
25
19
0
1024
15
4 Empty
5 Online
26
27
0
1024
15
6 Empty
7 Empty
8 Empty
9 Empty
10 Empty
11 Empty
Utilization (%)
Buffer
57
57
show chassis fpc (MX240, MX480, MX960 Routers with Application Services Modular Line Card
user@host>show chassis fpc 1
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
1 Online
34
5
0
3072
5
Copyright © 2013, Juniper Networks, Inc.
Buffer
13
453
PTX Series Packet Transport Switch Software Documentation
show chassis fpc (MX240, MX480, MX960 with Application Services Modular Line Card
user@host>show chassis fpc 1 detail
Slot 1 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Online
34
3072 MB
259 MB
4864 MB
2012-06-19 10:51:43 PDT
16 minutes, 48 seconds
550 Watts
show chassis fpc (MX2010 Router)
user@host show chassis fpc
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
0 Online
34
9
0
2048
18
1 Online
32
9
0
2048
15
2 Empty
3 Empty
4 Empty
5 Empty
6 Empty
7 Empty
8 Online
31
13
0
2048
11
9 Online
33
10
0
2048
18
Buffer
13
13
13
13
show chassis fpc (MX2020 Router)
user@host show chassis fpc
Temp
Slot State
(C)
0 Online
10
1 Online
8
2 Online
7
3 Online
8
4 Online
9
5 Online
8
6 Online
8
7 Online
9
8 Online
9
9 Online
10
10 Online
16
11 Online
11
12 Online
10
13 Online
11
14 Online
12
15 Online
13
16 Online
13
17 Online
12
18 Online
12
19 Online
14
CPU Utilization (%)
Total Interrupt
12
0
9
0
9
0
10
0
10
0
9
0
10
0
9
0
10
0
9
0
8
0
10
0
10
0
9
0
10
0
9
0
9
0
9
0
8
0
10
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
2048
18
13
show chassis fpc (MX2020 Router with MPC4E)
user@host> show chassis fpc
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
0 Online
33
12
2
2048
11
454
Buffer
13
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Online
Online
Empty
Empty
Empty
Online
Empty
Empty
Empty
Empty
Online
31
32
10
7
0
0
2048
2048
11
14
13
13
28
12
0
2048
15
14
38
8
0
2048
18
13
show chassis fpc detail (MX2020 Router with MPC4E)
user@host> show chassis fpc detail
Slot 0 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 9 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 10 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 14 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 19 information:
State
Copyright © 2013, Juniper Networks, Inc.
Online
34
2048 MB
806 MB
2632 MB
2013-02-17 08:17:35 PST
1 day, 14 hours, 50 minutes, 39 seconds
368 Watts
Online
32
2048 MB
806 MB
2632 MB
2013-02-17 08:17:43 PST
1 day, 14 hours, 50 minutes, 31 seconds
368 Watts
Online
37
2048 MB
1036 MB
6656 MB
2013-02-17 08:17:54 PST
1 day, 14 hours, 50 minutes, 20 seconds
520 Watts
Online
32
2048 MB
1036 MB
11264 MB
2013-02-17 08:18:01 PST
1 day, 14 hours, 50 minutes, 13 seconds
610 Watts
Online
455
PTX Series Packet Transport Switch Software Documentation
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
38
2048 MB
1324 MB
5120 MB
2013-02-17 08:18:08 PST
1 day, 14 hours, 50 minutes, 6 seconds
440 Watts
show chassis fpc pic-status (MX2020 Router with MPC4E)
user@host> show chassis fpc pic-status
Slot 0
Online
MPC Type 2 3D EQ
PIC 0 Online
MIC-3D-1OC192-XFP
PIC 2 Online
MIC-3D-8OC3OC12-4OC48
Slot 9
Online
MPC Type 2 3D EQ
PIC 0 Online
2x 10GE XFP
PIC 1 Online
2x 10GE XFP
PIC 2 Online
MIC-3D-1OC192-XFP
Slot 10 Online
MPCE Type 3 3D
PIC 0 Online
1x 10GE XFP
PIC 1 Online
1x 10GE XFP
Slot 14 Online
MPC4E 3D 2CGE+8XGE
PIC 0 Online
4x10GE SFPP
PIC 1 Online
1X100GE CFP
PIC 2 Online
4x10GE SFPP
PIC 3 Online
1X100GE CFP
Slot 19 Online
MPC 3D 16x 10GE
PIC 0 Online
4x 10GE(LAN) SFP+
PIC 1 Online
4x 10GE(LAN) SFP+
PIC 2 Online
4x 10GE(LAN) SFP+
PIC 3 Online
4x 10GE(LAN) SFP+
show chassis fpc detail (MX Series Routers)
user@host> show chassis fpc detail 2
Slot 0 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Online
degrees C / 96 degrees F
MB
MB
MB
2009-08-11 21:20:30 PDT
2 hours, 8 minutes, 50 seconds
335 Watts
36
1024
256
4096
show chassis fpc detail (EX Series Switches)
user@host> show chassis fpc detail 2
Slot 1 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 2 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
456
Online
41
2048 MB
1036 MB
11264 MB
2013-04-02 00:04:52 PDT
7 days, 9 hours, 47 minutes, 46 seconds
610 Watts
Online
41
2048 MB
1036 MB
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
11264 MB
2013-04-02 00:04:56 PDT
7 days, 9 hours, 47 minutes, 42 seconds
610 Watts
show chassis fpc (Hardware Not Supported)
user@host> show chassis fpc
show chassis fpc
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Online
-------------------- CPU less FPC -------------------1 Present
------ Hardware Not In Right Slot -----2 Online
0
0
0
0
0
3 Present
------ Hardware Not Supported -----4 Empty
5 Empty
6 Online
0
0
0
0
0
show chassis fpc detail (Hardware Not Supported)
user@host> show chassis fpc detail
Slot 0 information:
State
Total CPU DRAM
Start time
Uptime
Slot 1 information:
State
Reason
Slot 2 information:
State
Total CPU DRAM
Start time
Uptime
Slot 3 information:
State
Reason
Total CPU DRAM
Slot 6 information:
State
Total CPU DRAM
Start time
Uptime
Online
---- CPU less FPC ---2006-07-07 03:21:00 UTC
27 minutes, 51 seconds
Present
--- Hardware Not In Right Slot --Online
32 MB
2006-07-07 03:20:59 UTC
27 minutes, 52 seconds
Present
--- Hardware Not Supported --0 MB
Online
32 MB
2006-07-07 03:21:01 UTC
27 minutes, 50 seconds
show chassis fpc pic-status
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 1
1x OC-12 ATM, MM
PIC 2
1x OC-12 ATM, MM
PIC 3
1x OC-12 ATM, MM
Slot 1 Online
PIC 0
1x OC-48 SONET, SMIR
Slot 2 Online
PIC 0
1x OC-192 SONET, SMSR
show chassis fpc pic-status (M Series Routers)
user@host> show chassis fpc pic-status
Copyright © 2013, Juniper Networks, Inc.
457
PTX Series Packet Transport Switch Software Documentation
Slot 1
PIC 0
PIC 1
Slot 2
PIC 0
PIC 1
PIC 3
Slot 3
PIC 0
PIC 2
Slot 4
PIC 0
PIC 1
PIC 2
PIC 3
Slot 5
...
Online
Present
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
FPC Type 1
2x OC-3 ATM, MM- Hardware Error
4x OC-3 SONET, SMIR
E-FPC Type 2
4x G/E, 1000 BASE-SX
2x G/E SFP, 1000 BASE
1x Tunnel
E-FPC Type 1
1x G/E IQ, 1000 BASE
1x G/E SFP, 1000 BASE
E-FPC Type 2
4x G/E SFP, 1000 BASE
4x G/E SFP, 1000 BASE
4x G/E SFP, 1000 BASE
4x G/E SFP, 1000 BASE
FPC Type 2
show chassis fpc pic-status (M120 Router)
user@host> show chassis fpc pic-status
Slot 1
Online
M120 CFPC 10GE
PIC 0 Online
1x 10GE(LAN/WAN) XFP
Slot 3
Online
M120 FPC Type 2 (proto)
PIC 0 Online
2x G/E IQ, 1000 BASE
PIC 1 Online
4x OC-3 SONET, SMIR
PIC 2 Online
2x G/E IQ, 1000 BASE
PIC 3 Online
8x 1GE(LAN), IQ2
Slot 4
Online
M120 FPC Type 3 (proto)
PIC 0 Online
10x 1GE(LAN), 1000 BASE
Slot 5
Online
M120 FPC Type 1 (proto)
PIC 0 Present
1x G/E, 1000 BASE-LX- Not Supported
PIC 1 Online
1x CHOC3 IQ SONET, SMLR
PIC 2 Online
4x CHDS3 IQ
PIC 3 Online
1x G/E SFP, 1000 BASE
show chassis fpc pic-status (MX240, MX480, and MX960 Routers with Application Services Modular Line Card)
In the following output Slot 1 and Slot 5 are the Application Services Modular Carrier
Cards (AS MCC), PIC 0 is the Application Services Modular Storage Card (AS MSC), and
PIC 2 is the Application Services Modular Processing Card (AS MXC).
user@host>show chassis fpc pic-status
Slot 2
Online
MPC Type 1 3D Q
Slot 1
Online
AS-MCC
PIC 0 Online
AS-MSC
PIC 2 Online
AS-MXC
Slot 4
Offline
MPC 3D 16x 10GE
Slot 5
Offline
AS-MCC
show chassis fpc lcc (TX Matrix Router)
user@host> show chassis fpc lcc 0
lcc0-re0:
-------------------------------------------------------------------------Temp CPU
Utilization (%) Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB)
Heap
Buffer
0 Empty
1 Online
27
2
0
256
8
44
2 Online
27
3
0
256
15
44
3 Empty
458
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
4
5
6
7
Empty
Empty
Empty
Empty
show chassis fpc pic-status (TX Matrix Router)
user@host> show chassis fpc pic-status
lcc0-re0:
-------------------------------------------------------------------------Slot 0
Online
FPC Type 3
PIC 0 Online
1x OC-192 SM SR1
PIC 1 Online
1x OC-192 SM SR2
PIC 2 Online
1x OC-192 SM SR1
PIC 3 Online
1x Tunnel
Slot 1
Online
FPC Type 2
PIC 0 Online
1x OC-48 SONET, SMSR
PIC 1 Online
1x OC-48 SONET, SMSR
lcc1-re0:
-------------------------------------------------------------------------lcc2-re0:
-------------------------------------------------------------------------Slot 1
Online
FPC Type 3
PIC 0 Online
1x OC-192 SM SR1
Slot 5
Online
FPC Type 2
PIC 0 Online
1x OC-48 SONET, SMSR
PIC 1 Online
2x G/E, 1000 BASE-LX
PIC 2 Online
2x G/E, 1000 BASE-LX
PIC 3 Online
1x OC-48 SONET, SMSR
lcc3-re0:
--------------------------------------------------------------------------
show chassis fpc pic-status lcc (TX Matrix Router)
user@host> show chassis fpc pic-status lcc 0
lcc0-re0:
-------------------------------------------------------------------------Slot 0
Online
FPC Type 3
PIC 0 Online
1x OC-192 SM SR2
Slot 1
Online
FPC Type 2
PIC 0 Online
2x OC-12 ATM2 IQ, MM
PIC 1 Online
1x OC-48 SONET, SMSR
PIC 2 Online
1x OC-48 SONET, SMSR
PIC 3 Online
4x G/E, 1000 BASE-SX
show chassis fpc (TX Matrix Plus Router)
user@host> show chassis fpc
lcc0-re0:
-------------------------------------------------------------------------Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Empty
1 Online
38
4
0
2048
3
24
2 Online
43
8
0
2048
6
24
3 Empty
4 Online
43
6
0
2048
6
24
5 Empty
6 Online
42
13
0
2048
6
24
Copyright © 2013, Juniper Networks, Inc.
459
PTX Series Packet Transport Switch Software Documentation
7
Online
45
7
0
2048
3
24
lcc2-re0:
-------------------------------------------------------------------------Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Online
42
10
0
2048
6
24
1 Empty
2 Online
42
11
0
2048
6
24
3 Online
40
5
0
2048
3
24
4 Online
33
26
0
1024
8
49
5 Empty
6 Online
43
8
0
2048
6
24
7 Online
46
6
0
2048
3
24
lcc3-re0:
-------------------------------------------------------------------------Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Empty
1 Empty
2 Online
39
30
0
2048
7
24
3 Empty
4 Online
41
8
0
2048
6
24
5 Online
41
12
0
2048
6
24
6 Online
40
8
0
2048
6
24
7 Online
42
4
0
2048
3
24
show chassis fpc lcc (TX Matrix Plus Router)
user@host> show chassis fpc lcc 0
lcc0-re0:
-------------------------------------------------------------------------Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
Buffer
0 Empty
1 Online
38
4
0
2048
3
24
2 Online
43
8
0
2048
6
24
3 Empty
4 Online
43
6
0
2048
6
24
5 Empty
6 Online
42
14
0
2048
6
24
7 Online
45
6
0
2048
3
24
show chassis fpc detail (TX Matrix Plus Router)
user@host> show chassis fpc details
lcc0-re0:
-------------------------------------------------------------------------Slot 1 information:
State
Online
Temperature
38 degrees C / 100 degrees F
Total CPU DRAM
2048 MB
Total SRAM
64 MB
Total SDRAM
1280 MB
Start time
2010-10-04 20:06:22 PDT
Uptime
1 hour, 32 minutes, 51 seconds
Slot 2 information:
State
Online
Temperature
43 degrees C / 109 degrees F
460
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 4 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 6 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 7 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
2048 MB
128 MB
2560 MB
2010-10-04 20:06:37 PDT
1 hour, 32 minutes, 36 seconds
43
2048
128
2560
42
2048
128
2560
45
2048
64
1280
Online
degrees C / 109 degrees F
MB
MB
MB
2010-10-04 20:06:40 PDT
1 hour, 32 minutes, 33 seconds
Online
degrees C / 107 degrees F
MB
MB
MB
2010-10-04 20:06:42 PDT
1 hour, 32 minutes, 31 seconds
Online
degrees C / 113 degrees F
MB
MB
MB
2010-10-04 20:06:43 PDT
1 hour, 32 minutes, 30 seconds
lcc2-re0:
-------------------------------------------------------------------------Slot 0 information:
State
Online
Temperature
42 degrees C / 107 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:06:35 PDT
Uptime
1 hour, 32 minutes, 38 seconds
Slot 2 information:
State
Online
Temperature
42 degrees C / 107 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:06:37 PDT
Uptime
1 hour, 32 minutes, 36 seconds
Slot 3 information:
State
Online
Temperature
40 degrees C / 104 degrees F
Total CPU DRAM
2048 MB
Total SRAM
64 MB
Total SDRAM
1280 MB
Start time
2010-10-04 20:06:28 PDT
Uptime
1 hour, 32 minutes, 45 seconds
Slot 4 information:
State
Online
Temperature
33 degrees C / 91 degrees F
Total CPU DRAM
1024 MB
Total SRAM
64 MB
Copyright © 2013, Juniper Networks, Inc.
461
PTX Series Packet Transport Switch Software Documentation
Total SDRAM
Start time
Uptime
Slot 6 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 7 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
1280 MB
2010-10-04 20:08:03 PDT
1 hour, 31 minutes, 10 seconds
43
2048
128
2560
46
2048
64
1280
Online
degrees C / 109 degrees F
MB
MB
MB
2010-10-04 20:06:44 PDT
1 hour, 32 minutes, 29 seconds
Online
degrees C / 114 degrees F
MB
MB
MB
2010-10-04 20:06:46 PDT
1 hour, 32 minutes, 27 seconds
lcc3-re0:
-------------------------------------------------------------------------Slot 2 information:
State
Online
Temperature
38 degrees C / 100 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:17:31 PDT
Uptime
1 hour, 21 minutes, 42 seconds
Slot 4 information:
State
Online
Temperature
41 degrees C / 105 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:17:34 PDT
Uptime
1 hour, 21 minutes, 39 seconds
Slot 5 information:
State
Online
Temperature
41 degrees C / 105 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:17:36 PDT
Uptime
1 hour, 21 minutes, 37 seconds
Slot 6 information:
State
Online
Temperature
40 degrees C / 104 degrees F
Total CPU DRAM
2048 MB
Total SRAM
128 MB
Total SDRAM
2560 MB
Start time
2010-10-04 20:17:39 PDT
Uptime
1 hour, 21 minutes, 34 seconds
Slot 7 information:
State
Online
Temperature
42 degrees C / 107 degrees F
Total CPU DRAM
2048 MB
Total SRAM
64 MB
Total SDRAM
1280 MB
462
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Start time
Uptime
2010-10-04 20:17:41 PDT
1 hour, 21 minutes, 32 seconds
show chassis fpc pic-status (TX Matrix Plus Router)
user@host> show chassis fpc pic-status
lcc0-re0:
-------------------------------------------------------------------------Slot 1
Online
FPC Type 2-ES
PIC 0 Online
8x 1GE(LAN), IQ2
Slot 2
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
Slot 4
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
Slot 6
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
PIC 1 Online
4x 10GE (LAN/WAN) XFP
Slot 7
Online
FPC Type 3-ES
PIC 0 Online
10x 1GE(LAN), 1000 BASE
PIC 2 Online
1x OC-192 SM SR2
PIC 3 Online
10x 1GE(LAN), 1000 BASE
lcc2-re0:
-------------------------------------------------------------------------Slot 0
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
Slot 2
Online
FPC Type 4-ES
PIC 0 Online
4x 10GE (LAN/WAN) XFP
PIC 1 Online
4x 10GE (LAN/WAN) XFP
Slot 3
Online
FPC Type 2-ES
PIC 0 Online
8x 1GE(LAN), IQ2
Slot 4
Online
FPC Type 4
PIC 0 Online
10x10GE(LAN/WAN) SFPP
Slot 6
Online
FPC Type 4-ES
PIC 0 Online
4x OC-192 SONET XFP
Slot 7
Online
FPC Type 3-ES
PIC 0 Online
10x 1GE(LAN), 1000 BASE
PIC 1 Offline
1x 10GE(LAN/WAN) IQ2E
PIC 2 Online
1x OC-192 SM SR2
PIC 3 Online
1x Tunnel
lcc3-re0:
-------------------------------------------------------------------------Slot 2
Online
FPC Type 4-ES
PIC 0 Online
10x10GE(LAN/WAN) SFPP
Slot 4
Online
FPC Type 4-ES
PIC 0 Online
4x OC-192 SONET XFP
Slot 5
Online
FPC Type 4-ES
PIC 0 Online
4x OC-192 SONET XFP
PIC 1 Online
4x 10GE (LAN/WAN) XFP
Slot 6
Online
FPC Type 4-ES
PIC 1 Online
4x 10GE (LAN/WAN) XFP
Slot 7
Online
FPC Type 3-ES
PIC 0 Online
10x 1GE(LAN), 1000 BASE
PIC 1 Online
8x 1GE(TYPE3), IQ2E
PIC 2 Online
4x OC-48 SONET
show chassis fpc (T1600 Router)
user@host> show chassis fpc
Copyright © 2013, Juniper Networks, Inc.
463
PTX Series Packet Transport Switch Software Documentation
Slot
0
1
2
3
4
5
6
7
State
Empty
Empty
Online
Online
Empty
Online
Empty
Online
Temp
(C)
CPU Utilization (%)
Total Interrupt
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
49
46
3
6
0
0
2048
2048
3
6
24
24
46
5
0
2048
3
24
44
8
0
1024
7
49
show chassis fpc detail (T1600 Router)
user@host> show chassis fpc detail
show chassis fpc detail
Slot 2 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 3 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 5 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 7 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
49
2048
64
1280
47
2048
128
2560
46
2048
64
1280
44
1024
64
1280
Online
degrees C / 120 degrees F
MB
MB
MB
2010-10-04 21:12:52 PDT
32 minutes, 9 seconds
Online
degrees C / 116 degrees F
MB
MB
MB
2010-10-04 21:13:06 PDT
31 minutes, 55 seconds
Online
degrees C / 114 degrees F
MB
MB
MB
2010-10-04 21:12:56 PDT
32 minutes, 5 seconds
Online
degrees C / 111 degrees F
MB
MB
MB
2010-10-04 21:14:34 PDT
30 minutes, 27 seconds
show chassis fpc <fpc-slot> (EX Series Switch)
user@host> show chassis fpc 2
Slot State
2 Online
Temp
(C)
40
CPU Utilization (%)
Total Interrupt
12
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
2048
19
14
show chassis fpc slot (T1600 Router)
user@host> show chassis fpc slot 2
Temp
464
CPU Utilization (%)
Memory
Utilization (%)
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Slot State
2 Online
(C)
49
Total
3
Interrupt
0
DRAM (MB) Heap
2048
3
Buffer
24
show chassis fpc pic-status (T1600 Router)
user@host> show chassis fpc pic-status
Slot 2
PIC 0
PIC 1
PIC 3
Slot 3
PIC 0
PIC 1
Slot 5
PIC 0
PIC 1
PIC 2
PIC 3
Slot 7
PIC 0
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
FPC Type 1-ES
Load Type 1
4x 1GE(LAN), IQ2E
1x OC-12-3 SFP
FPC Type 4-ES
4x 10GE (LAN/WAN) XFP
4x OC-192 SONET XFP
FPC Type 2-ES
Load Type 2
8x 1GE(LAN), IQ2E
8x 1GE(LAN), IQ2E
1x OC-48-12-3 SFP
FPC Type 4
4x 10GE (LAN/WAN) XFP
show chassis fpc (T4000 Router)
user@host> show chassis fpc
regress@stymphalian# run show chassis fpc
Temp CPU Utilization (%)
Slot State
(C) Total Interrupt
0 Online
48
15
0
1 Empty
2 Empty
3 Online
51
15
0
4 Empty
5 Online
39
8
0
6 Online
49
15
0
7 Empty
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
2816
21
27
2816
21
27
2048
2816
6
21
23
27
show chassis fpc detail (T4000 Router)
user@host> show chassis fpc detail
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 3 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 5 information:
State
Temperature
Total CPU DRAM
Total SRAM
Copyright © 2013, Juniper Networks, Inc.
Online
48 degrees C / 118 degrees F
2816 MB
1554 MB
10752 MB
2012-02-09 22:56:25 PST
2 hours, 40 minutes, 52 seconds
Online
51 degrees C / 123 degrees F
2816 MB
1554 MB
10752 MB
2012-02-09 22:56:22 PST
2 hours, 40 minutes, 55 seconds
Online
39 degrees C / 102 degrees F
2048 MB
128 MB
465
PTX Series Packet Transport Switch Software Documentation
Total SDRAM
Start time
Uptime
Slot 6 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
2560 MB
2012-02-09 22:51:27 PST
2 hours, 45 minutes, 50 seconds
Online
49 degrees C / 120 degrees F
2816 MB
1554 MB
10752 MB
2012-02-09 22:56:29 PST
2 hours, 40 minutes, 48 seconds
show chassis fpc pic-status (T4000 Router)
user@host> show chassis fpc pic-status
Slot 0
Online
FPC Type 5-3D
PIC 0 Online
12x10GE (LAN/WAN)
PIC 1 Online
12x10GE (LAN/WAN)
Slot 3
Online
FPC Type 5-3D
PIC 0 Online
1x100GE
PIC 1 Online
12x10GE (LAN/WAN)
Slot 5
Online
FPC Type 4-ES
PIC 0 Online
100GE
PIC 1 Online
100GE CFP
Slot 6
Online
FPC Type 5-3D
PIC 0 Online
12x10GE (LAN/WAN)
PIC 1 Online
12x10GE (LAN/WAN)
SFPP
SFPP
SFPP
SFPP
SFPP
show chassis fpc (QFX Series)
user@switch> show chassis fpc
Temp CPU Utilization (%)
Memory
Utilization (%)
Slot State
(C) Total Interrupt
DRAM (MB) Heap
0 Online
26
2
0
2820
0
Buffer
49
show chassis fpc detail (QFX3500 Switches)
user@switch> show chassis fpc detail
Slot 0 information:
State
Online
Temperature
28 degrees C / 82 degrees F
Total CPU DRAM
2820 MB
Total SRAM
0 MB
Total SDRAM
0 MB
Start time
2010-09-20 01:34:13 PDT
Uptime
3 days, 3 hours, 31 minutes, 48 seconds
show chassis fpc pic-status (QFX3500 Switches)
user@switch> show chassis fpc pic-status
Slot 0
Online
QFX 48x10G 4x40G Switch
PIC 0 Online
48x 10G-SFP+
PIC 1 Online
15x 10G-SFP+
show chassis fpc interconnect-device (QFabric System)
user@switch> show chassis fpc interconnect-device interconnect1
FPC status:
Temp
Slot State
(C)
0 Online
0
1 Online
0
466
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
0
0
0
0
0
0
0
0
0
0
0
0
0
0
show chassis fpc interconnect-device (QFabric System)
user@switch> show chassis fpc interconnect-device interconnect1 3
FPC status:
Temp
Slot State
(C)
3 Online
0
show chassis fpc interconnect-device detail (QFabric System)
user@switch> show chassis fpc interconnect-device interconnect1 3 detail
Slot 3 information:
State
Online
Temperature
0 degrees C / 32 degrees F
Start time
2011-08-18 10:45:04 PDT
Uptime
1 minute, 49 seconds
show chassis fpc pic-status interconnect-device (QFabric System)
user@switch> show chassis fpc pic-status interconnect-device interconnect1
Slot 0
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 1
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 2
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 3
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 4
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 5
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 6
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 7
Online
QFX 16-port QSFP+ Front Card
PIC 0 Online
16x 40G-QSFP+
PIC 1 Online
16x 40G-GE
Slot 8
Online
QFX Fabric Rear Card
PIC 0 Online
16x 40G-GE
Slot 9
Online
QFX Fabric Rear Card
Copyright © 2013, Juniper Networks, Inc.
467
PTX Series Packet Transport Switch Software Documentation
PIC 0
Slot 10
PIC 0
Slot 11
PIC 0
Slot 12
PIC 0
Slot 13
PIC 0
Slot 14
PIC 0
Slot 15
PIC 0
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
16x
QFX
16x
QFX
16x
QFX
16x
QFX
16x
QFX
16x
QFX
16x
40G-GE
Fabric
40G-GE
Fabric
40G-GE
Fabric
40G-GE
Fabric
40G-GE
Fabric
40G-GE
Fabric
40G-GE
Rear Card
Rear Card
Rear Card
Rear Card
Rear Card
Rear Card
show chassis fpc pic-status node-device (QFabric System)
user@switch> show chassis fpc pic-status node-device node1
Slot node1 Online
QFX 48x10G 4x40G Switch
PIC 0 Online
48x 10G-SFP+
PIC 1 Online
4x 40G-QSFP+
show chassis fpc (PTX5000 Packet Transport Switch)
user@host> show chassis fpc
Temp
Slot State
(C)
0 Empty
1 Empty
2 Online
50
3 Empty
4 Empty
5 Online
48
6 Empty
7 Online
49
CPU Utilization (%)
Total Interrupt
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
6
0
2816
5
27
9
0
2816
5
27
8
0
2816
5
27
show chassis fpc detail (PTX5000 Packet Transport Switch)
user@host> show chassis fpc detail
Slot 2 information:
State
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 5 information:
State
Temperature
Temperature
468
35
35
50
54
54
52
61
58
57
58
62
61
2816
0
0
Online
degrees C / 95 degrees F (PMB)
degrees C / 95 degrees F (Intake)
degrees C / 122 degrees F (Exhaust A)
degrees C / 129 degrees F (Exhaust B)
degrees C / 129 degrees F (TL0)
degrees C / 125 degrees F (TQ0)
degrees C / 141 degrees F (TL1)
degrees C / 136 degrees F (TQ1)
degrees C / 134 degrees F (TL2)
degrees C / 136 degrees F (TQ2)
degrees C / 143 degrees F (TL3)
degrees C / 141 degrees F (TQ3)
MB
MB
MB
2012-01-12 12:05:42 PST
3 hours, 14 minutes, 7 seconds
Online
35 degrees C / 95 degrees F (PMB)
34 degrees C / 93 degrees F (Intake)
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
Slot 7 information:
State
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time
Uptime
48
53
54
52
69
56
54
56
59
60
2816
0
0
35
33
50
55
56
56
61
57
55
59
62
62
2816
0
0
degrees C / 118 degrees F (Exhaust A)
degrees C / 127 degrees F (Exhaust B)
degrees C / 129 degrees F (TL0)
degrees C / 125 degrees F (TQ0)
degrees C / 156 degrees F (TL1)
degrees C / 132 degrees F (TQ1)
degrees C / 129 degrees F (TL2)
degrees C / 132 degrees F (TQ2)
degrees C / 138 degrees F (TL3)
degrees C / 140 degrees F (TQ3)
MB
MB
MB
2012-01-12 12:05:43 PST
3 hours, 14 minutes, 6 seconds
Online
degrees C / 95 degrees F (PMB)
degrees C / 91 degrees F (Intake)
degrees C / 122 degrees F (Exhaust A)
degrees C / 131 degrees F (Exhaust B)
degrees C / 132 degrees F (TL0)
degrees C / 132 degrees F (TQ0)
degrees C / 141 degrees F (TL1)
degrees C / 134 degrees F (TQ1)
degrees C / 131 degrees F (TL2)
degrees C / 138 degrees F (TQ2)
degrees C / 143 degrees F (TL3)
degrees C / 143 degrees F (TQ3)
MB
MB
MB
2012-01-12 12:05:44 PST
3 hours, 14 minutes, 5 seconds
show chassis fpc pic-status (PTX5000 Packet Transport Switch)
user@host> show chassis fpc pic-status
Slot 2
Online
FPC
PIC 0 Online
24x 10GE(LAN)
PIC 1 Online
24x 10GE(LAN)
Slot 5
Online
FPC
PIC 0 Online
24x 10GE(LAN)
PIC 1 Online
2x 40GE CFP
Slot 7
Online
FPC
PIC 0 Online
24x 10GE(LAN)
PIC 1 Online
2x 40GE CFP
SFP+
SFP+
SFP+
SFP+
show chassis fpc (ACX2000 Universal Access Router)
user@host> show chassis fpc
Temp
Slot State
(C)
0 Online
61
CPU Utilization (%)
Total Interrupt
17
6
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
512
21
37
show chassis fpc 0 (ACX2000 Universal Access Router)
user@host> show chassis fpc 0
Temp CPU Utilization (%)
Slot State
(C) Total Interrupt
0 Online
61
17
6
Copyright © 2013, Juniper Networks, Inc.
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
512
21
37
469
PTX Series Packet Transport Switch Software Documentation
show chassis fpc detail (ACX2000 Universal Access Router)
user@host> show chassis fpc detail
Slot 0 information:
State
Temperature
Total CPU DRAM
Start time
Uptime
Online
61 degrees C / 141 degrees F
512 MB
2012-05-29 02:52:06 PDT
27 minutes, 17 seconds
show chassis fpc pic-status (ACX2000 Universal Access Router)
user@host> show chassis fpc pic-status
Slot 0
Online
PIC 0 Online
16x CHE1T1, RJ48
PIC 1 Online
8x 1GE(LAN) RJ45
PIC 2 Online
2x 1GE(LAN) SFP
PIC 3 Online
2x 10GE(LAN) SFP+
show chassis FPC 1 (MX Routers with Media Services Blade [MSB])
user@switch> show chassis fpc 1
Temp CPU Utilization (%)
Slot State
(C) Total Interrupt
1 Online
34
5
0
Memory
Utilization (%)
DRAM (MB) Heap
Buffer
3072
5
13
show chassis FPC 1 detail (MX Routers with Media Services Blade [MSB])
user@switch> show chassis fpc 1 detail
Slot 1 information:
State
Online
Temperature
34
Total CPU DRAM
3072 MB
Total RLDRAM
259 MB
Total DDR DRAM
4864 MB
Start time:
2012-06-19 10:51:43 PDT
Uptime:
16 minutes, 48 seconds
Max Power Consumption
550 Watts
470
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis hardware
Syntax
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Syntax (EX Series)
show chassis hardware
<clei-models>
<detail | extensive>
<models>
Syntax (T4000
Router)
show chassis hardware
<clei-models>
<detail | extensive>
<models>
Syntax (TX Matrix
Router)
show chassis hardware
<clei-models>
<detail | extensive>
<models>
<lcc number | scc>
Syntax (TX Matrix Plus
Router)
show chassis hardware
<clei-models>
<detail | extensive>
<models>
<lcc number | sfc number>
Syntax (MX Series
Routers and EX Series
Switches)
show chassis hardware
<detail | extensive>
<clei-models>
<models>
<all-members>
<local>
<member member-id>
Syntax (MX2010 and
MX2020 3D Universal
Edge Routers)
show chassis hardware
<clei-models>
<detail | extensive>
<models>
Syntax (QFX Series)
Syntax (PTX Series
Packet Transport
Switches)
show chassis hardware
<detail | extensive>
<clei-models>
<interconnect-device name>
<node-device name>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Copyright © 2013, Juniper Networks, Inc.
471
PTX Series Packet Transport Switch Software Documentation
Syntax (ACX Series
Universal Access
Routers)
Release Information
Description
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Command introduced before Junos OS Release 7.4.
models option introduced in Junos OS Release 8.2.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Switches.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Display a list of all Flexible PIC Concentrators (FPCs) and PICs installed in the router or
switch chassis, including the hardware version level and serial number.
In the EX Series switch command output, FPC refers to the following:
•
On EX2200 switches, EX3200 switches, EX4200 standalone switches, and EX4500
switches—Refers to the switch; FPC number is always 0.
•
On EX4200 switches in a Virtual Chassis configuration—Refers to the member of a
Virtual Chassis; FPC number equals the member ID, from 0 through 9.
•
On EX8208 and EX8216 switches—Refers to a line card; FPC number equals the slot
number for the line card.
On a QFX3500 standalone switch, both the FPC and FPC number are always 0.
On Type 5 FPC on T4000 routers, there are no top temperature sensor or bottom
temperature sensor parameters. Instead, fan intake temperature sensor and fan exhaust
temperature sensors parameters are displayed.
Options
none—Display information about hardware. For a TX Matrix router, display information
about the TX Matrix router and its attached T640 routers. For a TX Matrix Plus router,
display information about the TX Matrix Plus router and its attached T1600 routers.
clei-models—(Optional) Display Common Language Equipment Identifier (CLEI) barcode
and model number for orderable field-replaceable units (FRUs).
detail—(Optional) Include RAM and disk information in output.
extensive—(Optional) Display ID EEPROM information.
all-members—(MX Series routers and EX Series switches only) (Optional) Display
hardware-specific information for all the members of the Virtual Chassis
configuration.
interconnect-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Interconnect device.
472
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display hardware information for a specified T640 router (or line-card chassis) that
is connected to the TX Matrix router. On a TX Matrix Plus router, display hardware
information for a specified T1600 router (or line-card chassis) that is connected to
the TX Matrix Plus router. Replace number with a value from 0 through 3.
local—(MX Series routers and EX Series switches only) (Optional) Display
hardware-specific information for the local Virtual Chassis members.
member member-id—(MX Series routers and EX Series switches only) (Optional) Display
hardware-specific information for the specified member of the Virtual Chassis
configuration. Replace member-id with a value of 0 or 1.
models—(Optional) Display model numbers and part numbers for orderable FRUs and,
for components that use ID EEPROM format v2, the CLEI code.
node-device name—(QFabric systems only) (Optional) Display hardware-specific
information for the Node device.
scc—(TX Matrix router only) (Optional) Display hardware information for the TX Matrix
router (or switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display hardware information for
the TX Matrix Plus router (or switch-fabric chassis). Replace number with 0.
Additional Information
The show chassis hardware detail command now displays DIMM information for the
following Routing Engines:
Table 33: Routing Engines Displaying DIMM Information
Routing Engines
Routers
RE-S-1800x2 and RE-S-1800x4
MX240, MX480, and MX960 routers
RE-A-1800x2
M120 and M320 routers
Required Privilege
Level
Related
Documentation
List of Sample Output
view
•
show chassis power on page 577
show chassis hardware (EX8216 Switch) on page 478
show chassis hardware clei-models (EX8216 Switch) on page 479
show chassis hardware clei-models (T1600 Router) on page 480
show chassis hardware detail (EX4200 Switch) on page 481
show chassis hardware models (EX4500 Switch) on page 481
show chassis hardware (J6350 Router) on page 481
show chassis hardware (J6300 Router) on page 481
show chassis hardware (M7i Router) on page 482
show chassis hardware (M10 Router) on page 482
show chassis hardware models (M10 Router) on page 483
Copyright © 2013, Juniper Networks, Inc.
473
PTX Series Packet Transport Switch Software Documentation
show chassis hardware (M20 Router) on page 483
show chassis hardware models (M20 Router) on page 484
show chassis hardware (M40 Router) on page 484
show chassis hardware (M40e Router) on page 485
show chassis hardware (M120 Router) on page 485
show chassis hardware detail (M120 Router) on page 486
show chassis hardware models (M120 Router) on page 487
show chassis hardware (M160 Router) on page 488
show chassis hardware models (M160 Router) on page 488
show chassis hardware detail (M160 Router) on page 489
show chassis hardware (M320 Router) on page 490
show chassis hardware models (M320 Router) on page 491
show chassis hardware (MX5 Router) on page 491
show chassis hardware (MX10 Router) on page 492
show chassis hardware (MX40 Router) on page 493
show chassis hardware (Fixed MX80 Router) on page 493
show chassis hardware (Modular MX80 Router) on page 494
show chassis hardware (MX240 Router) on page 494
show chassis hardware detail (MX240 Router with RE Displaying DIMM
information) on page 495
show chassis hardware (MX240 Router with Enhanced MX SCB) on page 495
show chassis hardware (MX480 Router) on page 496
show chassis hardware (MX480 Router with Enhanced MX SCB) on page 497
show chassis hardware (MX960 Router) on page 497
show chassis hardware (MX960 Router with Bidirectional Optics) on page 497
show chassis hardware (MX960 Router with Enhanced MX SCB) on page 498
show chassis hardware models (MX960 Router with Enhanced MX SCB) on page 500
show chassis hardware detail (MX960 Router) on page 501
show chassis hardware (MX2010 Router) on page 501
show chassis hardware detail (MX2010 Router) on page 503
show chassis hardware extensive (MX2010 Router) on page 508
show chassis hardware models (MX2010 Router) on page 514
show chassis hardware clei-models (MX2010 Routers) on page 514
show chassis hardware (MX2020 Router) on page 515
show chassis hardware detail (MX2020 Router) on page 524
show chassis hardware models (MX2020 Router) on page 532
show chassis hardware clei-models (MX2020 Router) on page 534
show chassis hardware (MX Series Routers with ATM MIC) on page 535
show chassis hardware (MX240, MX480, MX960 Routers with Application Services
Modular Line Card) on page 536
show chassis hardware extensive (MX240, MX480, MX960 Routers with Application
Services Modular Line Card) on page 536
show chassis hardware (MX480 Router with MPC4E) on page 537
show chassis hardware (MX2020 Router with MPC4E) on page 538
show chassis hardware (T320 Router) on page 540
show chassis hardware (T640 Router) on page 541
show chassis hardware models (T640 Router) on page 541
show chassis hardware extensive (T640 Router) on page 542
show chassis hardware (T4000 Router) on page 543
474
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis hardware (T4000 Router with 16 GB line card chassis (LCC) Routing
Engine) on page 545
show chassis hardware clei-models (T4000 Router) on page 545
show chassis hardware detail (T4000 Router) on page 546
show chassis hardware models (T4000 Router) on page 548
show chassis hardware lcc (TX Matrix Router) on page 548
show chassis hardware scc (TX Matrix Router) on page 549
show chassis hardware (T1600 Router) on page 549
show chassis hardware (TX Matrix Plus Router) on page 552
show chassis hardware sfc (TX Matrix Plus Router) on page 556
show chassis hardware extensive (TX Matrix Plus Router) on page 558
show chassis hardware clei-models (TX Matrix Plus Router) on page 559
show chassis hardware detail (TX Matrix Plus Router) on page 561
show chassis hardware models (TX Matrix Plus Router) on page 563
show chassis hardware (16-Port 10-Gigabit Ethernet MPC with SFP+ Optics [MX Series
Routers]) on page 566
show chassis hardware (MPC3E [MX Series Routers]) on page 566
show chassis hardware (QFX3500 Switches) on page 568
show chassis hardware detail (QFX3500 Switches) on page 568
show chassis hardware models (QFX3500 Switches) on page 569
show chassis hardware clei-models (QFX3500 Switches) on page 569
show chassis hardware interconnect-device (QFabric Systems) on page 569
show chassis hardware node-device (QFabric Systems) on page 570
show chassis hardware (PTX5000 Packet Transport Switch) on page 570
show chassis hardware clei-models (PTX5000 Packet Transport Switch) on page 571
show chassis hardware detail (PTX5000 Packet Transport Switch) on page 572
show chassis hardware models (PTX5000 Packet Transport Switch) on page 573
show chassis hardware extensive (PTX5000 Packet Transport Switch) on page 574
show chassis hardware (MX Routers with Media Services Blade [MSB]) on page 575
show chassis hardware extensive (MX Routers with Media Services Blade
[MSB]) on page 575
Output Fields
Table 34 on page 476 lists the output fields for the show chassis hardware command.
Output fields are listed in the approximate order in which they appear.
Copyright © 2013, Juniper Networks, Inc.
475
PTX Series Packet Transport Switch Software Documentation
Table 34: show chassis hardware Output Fields
Field Name
Field Description
Level of Output
Item
Chassis component:
All levels
•
(EX Series switches)—Information about the chassis, Routing Engine (SRE
and Routing Engine modules in EX8200 switches), power supplies, fan trays,
and LCD panel. Also displays information about Flexible PIC Concentrators
(FPCs) and associated Physical Interface Cards (PICs). Information about
the backplane, midplane, and SIBs (SF modules) is displayed for EX8200
switches. See EX Series Switches Hardware and CLI Terminology Mapping.
•
(MX Series routers and EX Series switches)—Information about the backplane,
Routing Engine, Power Entry Modules (PEMs), and fan trays. Also displays
information about Flexible PIC Concentrators (FPCs) and associated Physical
Interface Cards (PICs), Modular Port Concentrators (MPCs) and associated
Modular Interface Cards (MICs), or Dense Port Concentrators (DPCs). MX80
routers have a single Routing Engine and a built-in Packet Forwarding Engine
that attaches directly to MICs. The Packet Forwarding Engine has two
“pseudo” FPCs (FPC 0 and FPC1). MX80 routers also have a Forwarding
Engine Board (FEB).
•
(M Series routers, except for the M320 router)—Information about the
backplane; power supplies; fan trays; Routing Engine; maxicab (the connection
between the Routing Engine and the backplane, for the M40 router only);
SCB, SSB, SFM, or FEB; MCS and PCG (for the M160 router only); each FPC
and PIC; and each fan, blower, and impeller.
•
(M120, M320, and T Series routers)—Information about the backplane, power
supplies, fan trays, midplane, FPM (craft interface), CIP, PEM, SCG, CB, FPC,
PIC, SFP, SPMB, and SIB.
•
(QFX Series)—Information about the chassis, Routing Engine, power supplies,
fan trays, Interconnect devices, and Node devices. Also displays information
about Flexible PIC Concentrators (FPCs) and associated Physical Interface
Cards (PICs).
•
(PTX Series)—Information about the chassis, midplane, craft interface (FPM),
power distribution units (PDUs) and Power Supply Modules (PSMs),
Centralized Clock Generators (CCGs), Routing Engines, Control Boards (CBs)
and Switch Processor Mezzanine Boards (SPMBs), Flexible PIC Concentrators
(FPCs), PICs, Switch Interface Boards (SIBs), and fan trays (vertical and
horizontal).
•
(MX2010 and MX2020 routers)—Information about the chassis, midplane,
craft interface (FPM), power midplane (PMP), Power Supply Modules (PSMs),
Power Distribution Modules (PDMs), Routing Engines, Control Boards (CBs)
and Switch Processor Mezzanine Boards (SPMBs), Switch Fabric Boards
(SFBs), Flexible PIC Concentrators (FPCs), PICs, adapter cards (ADCs) and
fan trays.
Version
Revision level of the chassis component.
All levels
Part number
Part number of the chassis component.
All levels
Serial number
Serial number of the chassis component. The serial number of the backplane
is also the serial number of the router chassis. Use this serial number when you
need to contact Juniper Networks Customer Support about the router or switch
chassis.
All levels
Assb ID or
Assembly ID
(extensive keyword only) Identification number that describes the FRU hardware.
extensive
476
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Table 34: show chassis hardware Output Fields (continued)
Field Name
Field Description
Level of Output
Assembly Version
(extensive keyword only) Version number of the FRU hardware.
extensive
Assembly Flags
(extensive keyword only) Flags.
extensive
FRU model number
(clei-models, extensive, and models keyword only) Model number of the FRU
hardware component.
none specified
CLEI code
(clei-models and extensive keyword only) Common Language Equipment
Identifier code. This value is displayed only for hardware components that use
ID EEPROM format v2. This value is not displayed for components that use ID
EEPROM format v1.
none specified
EEPROM Version
ID EEPROM version used by the hardware component: 0x00 (version 0), 0x01
(version 1), or 0x02 (version 2).
extensive
Description
Brief description of the hardware item:
All levels
•
Type of power supply.
•
Type of PIC. If the PIC type is not supported on the current software release,
the output states Hardware Not Supported.
•
Type of FPC: FPC Type 1, FPC Type 2, FPC Type 3, FPC Type 4 , or FPC
TypeOC192.
On EX Series switches, a brief description of the FPC.
On the J Series routers, the FPC type corresponds to the Physical Interface
Module (PIM). The following list shows the PIM abbreviation in the output
and the corresponding PIM name.
•
2x FE—Either two built-in Fast Ethernet interfaces (fixed PIM) or dual-port
Fast Ethernet PIM
•
4x FE—4-port Fast Ethernet ePIM
•
1x GE Copper—Copper Gigabit Ethernet ePIM (one 10-Mbps, 100-Mbps, or
1000-Mbps port)
•
1x GE SFP—SFP Gigabit Ethernet ePIM (one fiber port)
•
4x GE Base PIC—Four built-in Gigabit Ethernet ports on a J4350 or J6350
chassis (fixed PIM)
•
2x Serial—Dual-port serial PIM
•
2x T1—Dual-port T1 PIM
•
2x E1—Dual-port E1 PIM
•
2x CT1E1—Dual-port channelized T1/E1 PIM
•
1x T3—T3 PIM (one port)
•
1x E3—E3 PIM (one port)
•
4x BRI S/T—4-port ISDN BRI S/T PIM
•
4x BRI U—4-port ISDN BRI U PIM
•
1x ADSL Annex A—ADSL 2/2+ Annex A PIM (one port, for POTS)
•
1x ADSL Annex B—ADSL 2/2+ Annex B PIM (one port, for ISDN)
•
1x TGM550—TGM550 Telephony Gateway Module (Avaya VoIP gateway
module with one console port, two analog LINE ports, and two analog
TRUNK ports)
Copyright © 2013, Juniper Networks, Inc.
477
PTX Series Packet Transport Switch Software Documentation
Table 34: show chassis hardware Output Fields (continued)
Field Name
Field Description
•
Level of Output
1x DS1 TIM510—TIM510 E1/T1 Telephony Interface Module (Avaya VoIP
media module with one E1 or T1 trunk termination port and ISDN PRI
backup)
•
4x FXS, 4xFX0, TIM514—TIM514 Analog Telephony Interface Module (Avaya
VoIP media module with four analog LINE ports and four analog TRUNK
ports)
•
4x BRI TIM521—TIM521 BRI Telephony Interface Module (Avaya VoIP media
module with four ISDN BRI ports)
•
Crypto Accelerator Module—For enhanced performance of cryptographic
algorithms used in IP Security (IPsec) services
•
MPC M 16x 10GE—16-port 10-Gigabit Module Port Concentrator that supports
SFP+ optical transceivers. (Not on EX Series switches.)
•
For hosts, the Routing Engine type.
•
For small form-factor pluggable transceiver (SFP) modules, the type of fiber:
LX, SX, LH, or T.
•
LCD description for EX Series switches (except EX2200 switches).
•
MPC2—1-port MPC2 that supports two separate slots for MICs.
•
MPC3E—1-port MPC3E that supports two separate slots for MICs
(MIC-3D-1X100GE-CFP and MIC-3D-20GE-SFP) on MX960, MX480, and
MX240 routers. The MPC3E maps one MIC to one PIC (1 MIC, 1 PIC), which
differs from the mapping of legacy MPCs.
•
100GBASE-LR4, pluggable CFP optics
•
Supports the Enhanced MX Switch Control Board with fabric redundancy
and existing SCBs without fabric redundancy.
•
Interoperates with existing MX Series line cards, including Flexible Port
Concentrators (FPC), Dense Port Concentrators (DPCs), and Modular Port
Concentrators (MPCs).
•
MPC4E—Fixed configuration MPC4E that is available in two flavors:
MPC4E-3D-32XGE-SFPP and MPC4E-3D-2CGE-8XGE) on MX2020, MX960,
MX480, and MX240 routers.
•
LCD description for MX Series routers and EX Series switches
Sample Output
show chassis hardware (EX8216 Switch)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
REV 06
Midplane
REV 06
710-016845
CB 0
REV 22
710-020771
CB 1
REV 22
710-020771
Routing Engine 1
BUILTIN
FPC 3
REV 19
710-020683
CPU
REV 13
710-020598
FPC 4
REV 17
710-020683
CPU
REV 10
710-020598
PIC 0
BUILTIN
Base-X
Xcvr 1
REV 01
740-011613
478
Serial number
CY0109220035
BA0909120112
AX0109197723
AX0109197726
BUILTIN
BC0109083125
BF0109144549
BC0108500127
BF0108460510
BUILTIN
Description
EX8216
EX8216-MP
EX8216-RE320
EX8216-RE320
RE-EX8216
EX8200-48F
EX8200-CPU
EX8200-48F
EX8200-CPU
48x 100 Base-QFX/1000
PE70V89
SFP-SX
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr 11
Xcvr 12
Xcvr 13
Xcvr 14
Xcvr 15
Xcvr 21
Xcvr 22
Xcvr 23
Xcvr 24
Xcvr 25
Xcvr 26
Xcvr 27
Xcvr 28
Xcvr 29
Xcvr 30
Xcvr 31
Xcvr 32
Xcvr 33
Xcvr 34
Xcvr 35
Xcvr 36
Xcvr 37
Xcvr 38
Xcvr 39
Xcvr 40
Xcvr 41
Xcvr 43
Xcvr 45
FPC 13
CPU
SIB 0
SIB 1
SIB 2
SIB 3
SIB 4
SIB 5
SIB 6
SIB 7
PSU 0
PSU 1
PSU 2
PSU 3
PSU 4
PSU 5
Top Fan Tray
FTC 0
FTC 1
Bottom Fan Tray
FTC 0
FTC 1
LCD 0
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
01
16
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011782
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
740-011613
710-016837
PE70YCE
PE70VSH
E08C02063
PE70VKU
E08E03372
PE70VAD
E08E01228
PE70VSL
E08E03409
PE70VL4
PDQ4L2Z
PE70WFK
PBD2B5U
PE70UQX
PE70VL5
PE70V0F
E08C02052
E08C02197
PE70V0L
E08E03390
PDQ4VL9
E08E03370
E08E03362
E08C02065
E08E03405
E08E03411
E08C02171
E08E03410
BB0109051344
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
EX8200-8XS
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
10
10
10
10
10
10
10
10
17
17
17
17
17
17
710-021613
710-021613
710-021613
710-021613
710-021613
710-021613
710-021613
710-021613
740-021466
740-021466
740-021466
740-021466
740-021466
740-021466
AY0109166244
AY0109166357
AY0109166362
AY0109166338
AY0109166350
AY0109166365
AY0109166361
AY0109166399
BG0709170003
BG0709170004
BG0709170020
BG0709170017
BG0709170008
BG0709170018
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8216-SF320
EX8200-AC2K
EX8200-AC2K
EX8200-AC2K
EX8200-AC2K
EX8200-AC2K
EX8200-AC2K
REV 4
REV 4
760-022620
760-022620
CX1209140212
CX1209140212
EX8216-FT
EX8216-FT
REV 4
REV 4
REV 04
760-022620
760-022620
710-025742
CX1209140211
CX1209140211
CE0109186919
EX8216-FT
EX8216-FT
EX8200 LCD
show chassis hardware clei-models (EX8216 Switch)
user@host> show chassis hardware clei-models
Hardware inventory:
Item
Version Part number CLEI code
Midplane
REV 08
710-016845
PSU 0
REV 05
740-023002
COUPAEAEAA
PSU 1
REV 05
740-023002
COUPAEAEAA
PSU 2
REV 05
740-023002
COUPAEAEAA
Copyright © 2013, Juniper Networks, Inc.
FRU model number
EX8200-PWR-AC3KR
EX8200-PWR-AC3KR
EX8200-PWR-AC3KR
479
PTX Series Packet Transport Switch Software Documentation
PSU 3
PSU 4
PSU 5
Top Fan Tray
Bottom Fan Tray
REV 05
REV 05
REV 05
740-023002
740-023002
740-023002
COUPAEAEAA
COUPAEAEAA
COUPAEAEAA
EX8200-PWR-AC3KR
EX8200-PWR-AC3KR
EX8200-PWR-AC3KR
show chassis hardware clei-models (T1600 Router)
user@host> show chassis hardware clei-models
Hardware inventory:
Item
Version Part number CLEI code
Midplane
REV 03
710-005608
FPM Display
REV 05
710-002897
CIP
REV 06
710-002895
PEM 0
Rev 07
740-017906
IPUPAC7KTA
PEM 1
Rev 18
740-002595
SCG 0
REV 15
710-003423
Routing Engine 0 REV 08
740-014082
Routing Engine 1 REV 07
740-014082
CB 0
REV 05
710-007655
CB 1
REV 03
710-017707
FPC 0
REV 07
710-013558
PIC 0
REV 01
750-010618
PIC 1
REV 06
750-001900
PIC 2
REV 14
750-001901
PIC 3
REV 07
750-001900
FPC 1
REV 06
710-013553
PIC 0
REV 08
750-001072
PIC 1
REV 10
750-012266
PIC 2
REV 22
750-005634
FPC 2
PIC 0
REV 16
750-007141
PIC 1
REV 06
750-015217
PIC 2
REV 05
750-004695
PIC 3
REV 17
750-009553
FPC 3
REV 01
710-010154
PIC 0
REV 07
750-012793
PIC 1
REV 25
750-007141
PIC 2
REV 17
750-009553
PIC 3
REV 32
750-003700
FPC 4
REV 16
710-013037
PIC 1
REV 06
750-034781
FPC 5
REV 02
710-013037
PIC 0
REV 16
750-012518
PIC 1
REV 01
750-010850
FPC 6
REV 14
710-013037
PIC 0
REV 11
750-017405
PIC 1
REV 13
750-017405
FPC 7
REV 09
710-007529
PIC 0
REV 10
750-012793
PIC 1
REV 01
750-015217
PIC 2
REV 01
750-015217
PIC 3
REV 15
750-009450
SIB 0
REV 07
710-013074
SIB 1
REV 07
710-013074
SIB 2
REV 07
710-013074
SIB 3
REV 07
710-013074
SIB 4
REV 07
710-013074
Fan Tray 0
480
FRU model number
CHAS-BP-T640-S
CRAFT-T640-S
CIP-L-T640-S
PWR-T1600-3-80-DC-S
PWR-T-DC-S
SCG-T-S
RE-A-2000-4096-S
RE-A-2000-4096-S
CB-T-S
CB-T-S
T640-FPC2-E2
PB-4GE-SFP
PB-1OC48-SON-SMSR
PB-4OC12-SON-SMIR
PB-1OC48-SON-SMSR
T640-FPC1-E2
P-1GE-SX
PB-4GE-TYPE1-SFP-IQ2
PB-1CHOC12SMIR-QPP
PC-10GE-SFP
PC-8GE-TYPE3-SFP-IQ2
PC-TUNNEL
PC-4OC48-SON-SFP
T640-FPC3-E
PC-1XGE-TYPE3-XFP-IQ2
PC-10GE-SFP
PC-4OC48-SON-SFP
PC-1OC192-SON-VSR
T1600-FPC4-ES
PD-1CE-CFP
T1600-FPC4-ES
PD-4OC192-SON-XFP
PD-1OC768-SON-SR
T1600-FPC4-ES
PD-4XGE-XFP
PD-4XGE-XFP
T640-FPC3
PC-1XGE-TYPE3-XFP-IQ2
PC-8GE-TYPE3-SFP-IQ2
PC-8GE-TYPE3-SFP-IQ2
PC-1OC192-SON-SR2
SIB-I-T1600-S
SIB-I-T1600-S
SIB-I-T1600-S
SIB-I-T1600-S
SIB-I-T1600-S
FANTRAY-T-S
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Fan Tray 1
Fan Tray 2
FANTRAY-T-S
FAN-REAR-TX-T640-S
show chassis hardware detail (EX4200 Switch)
user@host> show chassis hardware detail
Hardware inventory:
Item
Version Part number
Chassis
Routing Engine 0 REV 11
750-021256
Routing Engine 0
FPC 0
REV 11
750-021256
CPU
BUILTIN
PIC 0
BUILTIN
PIC 1
REV 03B 711-021270
BRD
REV 08
711-021264
Power Supply 0
REV 03
740-020957
Fan Tray
Serial number
BM0208327733
BM0208327733
BM0208327733
BM0208327733
BUILTIN
BUILTIN
AR0208162285
AK0208328289
AT0508346354
Description
EX4200-24T
EX4200-24T, 8 POE
EX4200-24T, 8 POE
EX4200-24T, 8 POE
FPC CPU
24x 10/100/1000 Base-T
4x GE SFP
EX4200-24T, 8 POE
PS 320W AC
Fan Tray
Serial number
GG0210271867
GG0210271867
BUILTIN
H884FS00JC09
FRU model number
EX4500-40F-FB-C
EX4500-40F-FB-C
EX4500-40F-FB-C
EX4500-PWR1-AC-FB
Serial number
JN1090E07ADB
NP1265
NN9950
Description
JSR6350
show chassis hardware models (EX4500 Switch)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Routing Engine 0 REV 01
750-035700
FPC 0
REV 01
750-035700
PIC 0
BUILTIN
Power Supply 1
REV 01
740-029654
show chassis hardware (J6350 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 03
710-014593
System IO
REV 01
710-016210
Crypto Module
Routing Engine
REV 08
710-015273
ad0
248 MB 256MB CKS
Flash
FPC 0
PIC 0
FPC 1
REV 06
750-010355
PIC 0
FPC 3
REV 06
750-011148
PIC 0
FPC 6
REV 06
750-013492
PIC 0
Power Supply 0
JX350 System IO
Crypto Acceleration
NM6509
RE-J6350-3400
00102006C24A00000039 Compact
AI07030023
AJ06520151
NC4170
FPC
4x
FPC
2x
FPC
2x
FPC
4x
GE Base PIC
T1
E1
FE
show chassis hardware (J6300 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 02.04 710-010001
System IO
REV 02.00 710-010003
Routing Engine
RevX2.6 750-010006
FPC 0
PIC 0
Copyright © 2013, Juniper Networks, Inc.
Serial number
JN000164AB
CORE99570
CORE100848
IWGS40735390
Description
J6300
System IO board
RE-J.3
FPC
2x FE
481
PTX Series Packet Transport Switch Software Documentation
FPC 1
PIC 0
FPC 2
PIC 0
FPC 3
PIC 0
RevX2.0
750-011380
N3960005
RevX2.0
750-011380
N3960002
REV 03
750-010354
N0780028
FPC
1xADSL pic Annex A
FPC
1xADSL pic Annex B
FPC
1x T3
show chassis hardware (M7i Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 02
710-008761
Power Supply 0
Rev 04
740-008537
Routing Engine
REV 01
740-008846
CFEB
REV 02
750-009492
FPC 0
PIC 0
REV 04
750-003163
PIC 1
REV 04
750-003163
PIC 2
REV 04
750-003163
PIC 3
REV 02
750-003163
FPC 1
PIC 2
REV 01
750-009487
PIC 3
REV 01
750-009098
Hardware inventory:
Item
Version
Chassis
Midplane
REV 05
Power Supply 0
Rev 08
Routing Engine
REV 07
CFEB
REV 09
FPC 0
PIC 0
REV 12
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
PIC 1
REV 03
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 3
REV 01
PIC 2
REV 15
PIC 3
REV 01
FPC 1
PIC 2
PIC 3
REV 09
Xcvr 0
REV 01
Fan Tray
Part number
Serial number
31959
CA0209
PD10272
1000396803
CA0166
HJ6416
HJ6423
HJ6421
HJ0425
HM2275
CA0142
710-008761
740-008537
740-011202
750-010463
Serial number
B1157
DM0840
TE53755
1000736567
DK6952
750-012838
740-011614
740-011615
740-011614
NON-JNPR
750-023116
740-012434
740-012434
740-016064
750-014895
750-025390
DL7993
PD94TDJ
PAD5EER
PD94THU
PDC2E7A
JT0203
AGT063832PS
AGT063832LY
C06J19018
DM5757
JW9448
BUILTIN
750-009099
740-012434
BUILTIN
DM0899
AGT07150HGJ
Description
M7i
M7i Midplane
AC Power Supply
RE-5.0
Internet Processor IIv1
E-FPC
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
1x G/E, 1000 BASE-SX
E-FPC
ASP - Integrated
2x F/E, 100 BASE-TX
Description
M7i
M7i Midplane
AC Power Supply
RE-850
Internet Processor II
E-FPC
4x 1GE(LAN), IQ2
SFP-LX10
UNSUPPORTED
SFP-LX10
SFP-LX10
4x CHSTM1 SDH CE SFP
SFP-SR
SFP-SR
SFP-LR
MultiServices 100
12x T1/E1 CE
E-FPC
1x Tunnel
1x G/E, 1000 BASE
UNSUPPORTED
Rear Fan Tray
show chassis hardware (M10 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 1.1 710-001950
Power supply A
Rev 01
740-002497
Power supply B
Rev 01
740-002497
Display
REV 1.2 710-001995
Host
482
Serial number
1122
S/N AC6626
S/N LC36095
S/N LC36100
S/N AC6656
18000005dfb3fb01
Description
M10
AC
AC
teknor
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
FEB
FPC 0
PIC 0
PIC 1
FPC 1
Fan Tray 0
Fan Tray 1
REV 01
710-001948
S/N AC6632
Internet Processor II
REV 08
REV 01
750-001072
750-000613
S/N AB2485
S/N AA1048
1x G/E, 1000 BASE-SX
1x OC-12 SONET, SMIR
FANTRAY-M10I-S
FANTRAY-M10I-S
show chassis hardware models (M10 Router)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Midplane
REV 04
710-008920
Power Supply 0
Rev 06
740-008537
Power Supply 1
Rev 06
740-008537
HCM 0
REV 03
710-010580
HCM 1
REV 03
710-010580
Routing Engine 0 REV 09
740-009459
CFEB 0
REV 05
750-010465
FPC 0
PIC 0
REV 10
750-002971
PIC 1
REV 11
750-002992
PIC 2
REV 03
750-002977
PIC 3
REV 08
750-005724
FPC 1
PIC 2
REV 12
750-008425
PIC 3
REV 13
750-005636
Fan Tray 0
Fan Tray 1
CLEI code
FRU model number
CHAS-MP-M10i-S
PWR-M10i-M7i-AC-S
PWR-M10i-M7i-AC-S
HCM-M10i-S
HCM-M10i-S
RE-400-256-S
FEB-M10i-M7i-S
PE-4OC3-SON-MM
PE-4FE-TX
PE-2OC3-ATM-MM
PE-2OC3-ATM2-MM
PE-AS
PE-4CHDS3-QPP
FANTRAY-M10I-S
FANTRAY-M10I-S
show chassis hardware (M20 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Backplane
REV 07
710-001517
Power supply B
Rev 01
740-001465
Display
REV 02
710-001519
Host 0
SSB slot 0
REV 01
710-001951
SSRAM bank 0
REV 01
710-001385
SSRAM bank 1
REV 01
710-001385
SSRAM bank 2
REV 01
710-001385
SSRAM bank 3
REV 01
710-001385
SSB slot 1
N/A
N/A
FPC 1
REV 01
710-001292
SSRAM
REV 01
710-000077
SDRAM bank 0
REV 01
710-000099
SDRAM bank 1
REV 01
710-000099
PIC 0
REV 03
750-000612
PIC 1
REV 01
750-000616
PIC 2
REV 01
750-000613
PIC 3
REV 01
750-002501
FPC 2
REV 01
710-001292
SSRAM
REV 01
710-000077
SDRAM bank 0
REV 01
710-000099
SDRAM bank 1
REV 01
710-000099
Fan Tray 0
Fan Tray 1
Copyright © 2013, Juniper Networks, Inc.
Serial number
20033
S/N AA7940
S/N 000001
S/N AA9704
98000004f8f27501
S/N AD5905
S00480
S00490
S001:?
S00483
N/A
S/N AB7528
S/N 304209
S/N 000603
S/N 000414
S/N AB8433
S/N AA1168
S/N AA1008
S/N AD5810
S/N AC0119
S/N 503241
S/N 306835
S/N 306832
Description
M20
AC
teknor
Internet Processor II
2 MB
2 MB
2 MB
2 MB
Backup
1 MB
64 MB
64 MB
2x OC-3 ATM, MM
1x OC-12 ATM, MM
1x OC-12 SONET, SMIR
4x E3
1 MB
64 MB
64 MB
Front Upper Fan Tray
Front Middle Fan Tray
483
PTX Series Packet Transport Switch Software Documentation
Fan Tray 2
Fan Tray 3
Front Bottom Fan Tray
Rear Fan Tray
show chassis hardware models (M20 Router)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Backplane
REV 03
710-002334
Power Supply A
REV 06
740-001465
Display
REV 04
710-001519
Routing Engine 0 REV 06
740-003239
Routing Engine 1 REV 06
740-003239
SSB 0
REV 02
710-001951
SSB 1
N/A
N/A
FPC 0
REV 03
710-003308
PIC 0
REV 08
750-002303
PIC 1
REV 07
750-004745
PIC 2
REV 03
750-002965
FPC 1
REV 03
710-003308
PIC 0
REV 03
750-002914
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
CLEI code
FRU model number
CHAS-MP-M20-S
PWR-M20-AC-S
CRAFT-M20-S
RE-333-768-S
RE-333-768-S
SSB-E-M20
FPC-E
P-4FE-TX
P-2MCDS3
PE-4CHDS3
FPC-E
P-2OC3-ATM-MM
FANTRAY-F-M20-S
FANTRAY-F-M20-S
FANTRAY-F-M20-S
FANTRAY-R-M20-S
show chassis hardware (M40 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Backplane
REV 02
710-000073
Power supply A
Rev 2
740-000235
Maxicab
REV X1
710-000229
Minicab
REV X1
710-000482
Display
REV 06
710-000150
Host
SCB
REV X1
710-000075
SSRAM bank 0
REV 02
710-000077
SSRAM bank 1
REV 02
710-000077
SSRAM bank 2
REV 02
710-000077
SSRAM bank 3
REV 02
710-000077
FPC 0
REV 01
710-000175
SSRAM
REV 01
710-000077
SDRAM bank 0
REV 01
710-000099
SDRAM bank 1
REV X1
710-000099
PIC 0
REV 04
750-000613
PIC 1
REV 04
750-000613
PIC 2
REV 04
750-000613
PIC 3
REV 04
750-000613
FPC 2
REV 01
710-000175
SSRAM
REV 02
710-000077
SDRAM bank 0
REV 01
710-000099
SDRAM bank 1
REV 01
710-000099
PIC 0
REV X1
750-000603
PIC 1
REV X1
750-000615
PIC 2
REV X1
750-000611
PIC 3
REV 04
750-000613
FPC 4
REV 01
710-000175
SSRAM
REV 01
710-000077
SDRAM bank 0
REV 01
710-000099
484
Serial number
S/N AA0053
S/N 000042
S/N AAO139
S/N AA0201
S/N AA0905
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
AA0158
AA2267
AA2270
AA2269
AA2268
AA0048
AA2333
AA2332
AA2337
aa0343
AA0379
AA0377
AA0378
AA0042
AA2288
AA2331
AA2330
AA0143
AA0149
AA0148
AA0330
AA0050
AA2327
AA2329
Description
DC
cpv5000
Internet Processor I
1 MB
1 MB
1 MB
1 MB
1 MB
64 MB
64 MB
1x OC-12 SONET, SMIR
1x OC-12 SONET, SMIR
1x OC-12 SONET, SMIR
1x Tunnel
1 MB
64 MB
64 MB
4x OC-3 SONET, SMIR
4x OC-3 SONET, MM
4x OC-3 SONET, MM
1x OC-12 SONET, SMIR
1 MB
64 MB
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SDRAM bank 1
PIC 0
PIC 2
PIC 3
FPC 5
SSRAM
SDRAM bank 0
SDRAM bank 1
PIC 1
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
04
05
08
10
01
01
01
01
710-000099
750-000613
750-000616
750-001072
710-000175
710-000077
710-000099
710-000099
750-001323
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
S/N
AA2328
AA0320
AA1341
AB2462
AA7663
501590
300949
300868
AB1670
64
1x
1x
1x
MB
OC-12 SONET, SMIR
OC-12 ATM, MM
G/E, 1000 BASE-SX
1 MB
64 MB
64 MB
1x Tunnel
show chassis hardware (M40e Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-005071
FPM CMB
REV 03
710-001642
FPM Display
REV 03
710-001647
CIP
REV 04
710-002649
PEM 0
Rev 01
740-003787
PEM 1
Rev 01
740-003787
PCG 0
REV 07
710-001568
PCG 1
REV 07
710-001568
Host 0
MCS 0
REV 11
710-001226
SFM 0 SPP
REV 07
710-001228
SFM 0 SPR
REV 05
710-002189
SFM 1 SPP
REV 07
710-001228
SFM 1 SPR
REV 05
710-002189
FPC 0
REV 01
710-011725
CPU
REV 01
710-004600
PIC 0
REV 03
750-003737
FPC 1
REV 01
710-005197
CPU
REV 01
710-004600
PIC 0
REV 07
750-001900
FPC 2
REV 02
710-005197
CPU
REV 01
710-004600
PIC 0
REV 03
750-003737
FPC 4
REV 02
710-005078
CPU
REV 01
710-004600
PIC 0
REV 03
750-001894
PIC 2
REV 01
750-002575
FPC 6
REV 02
710-005078
CPU
REV 01
710-004600
PIC 0
REV 02
750-002911
PIC 2
REV 01
750-002577
Serial number
AX3671
AR9074
AR7331
BB4449
MC12364
MC12383
AG1332
AR3789
3e000007c8176601
AN5813
AG4676
AE4735
AP1347
BE0063
BE0669
BD9504
AY3991
BD9842
BB4869
AR8278
BD9824
BD9531
AY3986
BE0664
BD9559
AG7963
AF2472
BE0652
BD9607
AN2286
AP6345
Description
m40e
Power Entry Module
Power Entry Module
Present
Internet Processor II
Internet Processor II
M40e-EP-FPC Type 1
4x G/E, 1000 BASE-SX
M40e-FPC Type 2
1x OC-48 SONET, SMSR
M40e-FPC Type 2
4x G/E, 1000 BASE-SX
M40e-FPC Type 1
1x G/E, 1000 BASE-SX
4x OC-3 SONET, SMIR
M40e-FPC Type 1
4x F/E, 100 BASE-TX
4x OC-3 SONET, MM
show chassis hardware (M120 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-013667
FPM Board
REV 02
710-011407
FPM Display
REV 02
710-011405
FPM CIP
REV 02
710-011410
PEM 0
Rev 05
740-011936
PEM 1
Rev 05
740-011936
Routing Engine 0 REV 03
740-014080
Copyright © 2013, Juniper Networks, Inc.
Serial number
JN000054AC
RB4170
CJ9186
CJ9173
CJ9221
RM28320
RM28321
1000642883
Description
M120
M120 Midplane
M120 FPM Board
M120 FPM Display
M120 FPM CIP
AC Power Entry Module
AC Power Entry Module
RE-A-1000
485
PTX Series Packet Transport Switch Software Documentation
CB 0
CB 1
FPC 1
PIC 0
Xcvr 0
FPC 3
PIC 0
Xcvr 0
Xcvr 1
PIC 1
PIC 2
Xcvr 0
Xcvr 1
PIC 3
Xcvr 0
Xcvr 6
Xcvr 7
Board B
FPC 4
PIC 0
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
03
16
01
01
09
16
01
01
07
01
01
01
02
02
16
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
FPC 5
PIC 0
PIC 1
REV
REV
REV
REV
REV
REV
REV
***
REV
01
740-011782
P922A1F
01
740-011782
P922A16
01
740-011782
P922A0U
01
740-011782
P9229UZ
01
740-009029
P11JXWP
01
740-011613
P9F1ALW
01
710-011388
CJ9088
Hardware Not Supported ***
05
750-012052
NB0410
REV
REV
REV
REV
REV
REV
01
01
01
04
04
04
0
1
2
3
4
6
PIC 2
PIC 3
Board B
FEB 3
FEB 4
FEB 5
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
REV 03
REV 06
REV 02
710-011403
710-011403
710-015908
BUILTIN
740-014279
710-011393
750-008155
740-011613
740-007326
750-007745
750-008155
740-011613
740-011613
750-011800
740-011613
740-011613
740-011782
710-011395
710-011398
750-007141
750-013167
750-010240
710-011390
710-011663
710-011663
710-011663
CM8346
CP6728
CP6925
BUILTIN
62E204N00007
CJ9234
NB5229
P9F15JB
P4Q0R9G
CG4360
ND7787
P9F12AS
P9F1ALU
JW1284
P9F1AM6
P9F16NN
P8C29Y7
CN3754
CP6741
NB2855
CM3824
CB5366
CJ9103
CP6673
CJ9368
CJ9386
M120 Control Board
M120 Control Board
M120 CFPC 10GE
1x 10GE(LAN/WAN) XFP
XFP-10G-LR
M120 FPC Type 2
2x G/E IQ, 1000 BASE
SFP-SX
SFP-SX
4x OC-3 SONET, SMIR
2x G/E IQ, 1000 BASE
SFP-SX
SFP-SX
8x 1GE(LAN), IQ2
SFP-SX
SFP-SX
SFP-SX
M120 FPC Mezz
M120 FPC Type 3
10x 1GE(LAN), 1000 BASE
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-LX
SFP-SX
M120 FPC Type 1
1x CHOC3 IQ SONET, SMLR
4x CHDS3 IQ
1x G/E SFP, 1000 BASE
M120 FPC Mezz Board
M120 FEB
M120 FEB
M120 FEB
Front Top Fan Tray
Front Bottom Fan Tray
Rear Top Fan Tray
Rear Bottom Fan Tray
show chassis hardware detail (M120 Router)
user@host> show chassis hardware detail
Hardware inventory:
Item
Version Part number Serial number
Description
Chassis
JN000054AC
M120
Midplane
REV 01
710-013667
RB4170
M120 Midplane
FPM Board
REV 02
710-011407
CJ9186
M120 FPM Board
FPM Display
REV 02
710-011405
CJ9173
M120 FPM Display
FPM CIP
REV 02
710-011410
CJ9221
M120 FPM CIP
PEM 0
Rev 05
740-011936
RM28320
AC Power Entry Module
PEM 1
Rev 05
740-011936
RM28321
AC Power Entry Module
Routing Engine 0 REV 03
740-014080
1000642883
RE-A-1000
ad0
248 MB SILICONSYSTEMS INC 256M 126CT505S0763SC00110 Compact Flash
ad2
38154 MB HTE541040G9SA00
MPBBT0X2HS2E3M
Hard Disk
CB 0
REV 03
710-011403
CM8346
M120 Control Board
CB 1
REV 06
710-011403
CP6728
M120 Control Board
FPC 1
REV 02
710-015908
CP6925
M120 CFPC 10GE
PIC 0
BUILTIN
BUILTIN
1x 10GE(LAN/WAN) XFP
486
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr 0
FPC 3
PIC 0
Xcvr 0
Xcvr 1
PIC 1
PIC 2
Xcvr 0
Xcvr 1
PIC 3
Xcvr 0
Xcvr 6
Xcvr 7
Board B
FPC 4
PIC 0
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
03
16
01
01
09
16
01
01
07
01
01
01
02
02
16
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
FPC 5
PIC 0
PIC 1
REV
REV
REV
REV
REV
REV
REV
***
REV
01
740-011782
P922A1F
01
740-011782
P922A16
01
740-011782
P922A0U
01
740-011782
P9229UZ
01
740-009029
P11JXWP
01
740-011613
P9F1ALW
01
710-011388
CJ9088
Hardware Not Supported ***
05
750-012052
NB0410
REV
REV
REV
REV
REV
REV
01
01
01
04
04
04
0
1
2
3
4
6
PIC 2
PIC 3
Board B
FEB 3
FEB 4
FEB 5
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
740-014279
710-011393
750-008155
740-011613
740-007326
750-007745
750-008155
740-011613
740-011613
750-011800
740-011613
740-011613
740-011782
710-011395
710-011398
750-007141
750-013167
750-010240
710-011390
710-011663
710-011663
710-011663
62E204N00007
CJ9234
NB5229
P9F15JB
P4Q0R9G
CG4360
ND7787
P9F12AS
P9F1ALU
JW1284
P9F1AM6
P9F16NN
P8C29Y7
CN3754
CP6741
NB2855
XFP-10G-LR
M120 FPC Type 2
2x G/E IQ, 1000 BASE
SFP-SX
SFP-SX
4x OC-3 SONET, SMIR
2x G/E IQ, 1000 BASE
SFP-SX
SFP-SX
8x 1GE(LAN), IQ2
SFP-SX
SFP-SX
SFP-SX
M120 FPC Mezz
M120 FPC Type 3
10x 1GE(LAN), 1000 BASE
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-LX
SFP-SX
M120 FPC Type 1
1x CHOC3 IQ SONET, SMLR
CM3824
CB5366
CJ9103
CP6673
CJ9368
CJ9386
4x CHDS3 IQ
1x G/E SFP, 1000 BASE
M120 FPC Mezz Board
M120 FEB
M120 FEB
M120 FEB
Front Top Fan Tray
Front Bottom Fan Tray
Rear Top Fan Tray
Rear Bottom Fan Tray
CLEI code
FRU model number
show chassis hardware models (M120 Router)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Midplane
REV 01
710-013667
FPM CIP
REV 02
710-011410
PEM 0
Rev 05
740-011936
PEM 1
Rev 05
740-011936
Routing Engine 0 REV 03
740-014080
CB 0
REV 03
710-011403
CB 1
REV 06
710-011403
FPC 1
REV 02
710-015908
FPC 3
PIC 0
REV 16
750-008155
PIC 1
REV 09
750-007745
PIC 2
REV 16
750-008155
PIC 3
REV 07
750-011800
FPC 4
PIC 0
REV 16
750-007141
FPC 5
PIC 1
REV 05
750-012052
PIC 2
REV 01
750-013167
Copyright © 2013, Juniper Networks, Inc.
CRAFT-M120-S
PWR-M120-AC-S
PWR-M120-AC-S
RE-A-1000-2048-S
CB-M120-S
CB-M120-S
M120-cFPC-1XGE-XFP
PB-2GE-SFP-QPP
PC-4OC3-SON-SMIR
PB-2GE-SFP-QPP
PB-8GE-TYPE2-SFP-IQ2
PC-10GE-SFP
PB-1CHOC3-SMIR-QPP
PE-4CHDS3-QPP
487
PTX Series Packet Transport Switch Software Documentation
PIC 3
Fan Tray
Fan Tray
Fan Tray
Fan Tray
REV 01
750-010240
PB-1GE-SFP
FFANTRAY-M120-S
FFANTRAY-M120-S
RFANTRAY-M120-S
RFANTRAY-M120-S
0
1
2
3
show chassis hardware (M160 Router)
user@host> show chassis hardware
Item
Version Part number
Chassis
Midplane
REV 02
710-001245
FPM CMB
REV 01
710-001642
FPM Display
REV 01
710-001647
CIP
REV 02
710-001593
PEM 0
Rev 01
740-001243
PEM 1
Rev 01
740-001243
PCG 0
REV 01
710-001568
PCG 1
REV 01
710-001568
Host 1
MCS 1
REV 03
710-001226
SFM 0 SPP
REV 04
710-001228
SFM 0 SPR
REV 02
710-001224
SFM 1 SPP
REV 04
710-001228
SFM 1 SPR
REV 01
710-001224
FPC 0
REV 03
710-001255
CPU
REV 02
710-001217
PIC 1
REV 05
750-000616
PIC 2
REV 05
750-000616
PIC 3
REV 01
750-000616
FPC 1
REV 02
710-001611
CPU
REV 02
710-001217
PIC 0
REV 03
750-001900
PIC 1
REV 01
710-002381
FPC 2
CPU
REV 03
710-001217
PIC 0
REV 01
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
Serial number
101
S/N AB4107
S/N AA2911
S/N AA2999
S/N AA9563
S/N KJ35769
S/N KJ35765
S/N AA9794
S/N AA9804
da000004f8d57001
S/N AA9777
S/N AA2975
S/N AA9838
S/N AA2860
S/N AB0139
S/N AA9806
S/N AA9590
S/N AA1527
S/N AA1535
S/N AA1519
S/N AA9523
S/N AA9571
S/N AA9626
S/N AD3633
Description
M160
DC
DC
teknor
Internet Processor I
Internet Processor I
FPC Type 1
1x OC-12
1x OC-12
1x OC-12
FPC Type
ATM, MM
ATM, MM
ATM, MM
2
1x STM-16 SDH, SMIR
2x G/E, 1000 BASE-SX
FPC Type OC192
S/N AB3329
1x OC-192 SM SR-2
Rear Bottom Blower
Rear Top Blower
Front Top Blower
Front Fan Tray
show chassis hardware models (M160 Router)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Midplane
REV 03
710-009120
FPM Display
REV 02
710-009351
CIP
REV 03
710-005926
PEM 2
Rev X4
740-009148
PEM 3
Rev X4
740-009148
Routing Engine 0 REV 02
740-008883
Routing Engine 1 REV 02
740-008883
FPC 0
REV 02
710-010419
PIC 0
REV 01
750-001323
PIC 1
REV 02
750-002987
PIC 2
REV 04
750-001894
PIC 3
REV 04
750-001896
FPC 1
REV 02
710-010419
PIC 0
REV 04
750-001894
488
CLEI code
FRU model number
CHAS-BP-M320-S
CRAFT-M320-S
CIP-M320-S
PWR-M-DC-S
PWR-M-DC-S
RE-1600-2048-S
RE-1600-2048-S
M320-FPC1
P-TUNNEL
PE-1OC12-SON-SMIR
PB-1GE-SX
PB-1OC12-SON-SMIR
M320-FPC1
PB-1GE-SX
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PIC 1
PIC 3
FPC 2
PIC 0
PIC 1
PIC 2
PIC 3
PIC 1
PIC 2
PIC 3
FPC 3
PIC 0
PIC 1
PIC 3
FPC 4
FPC 5
FPC 6
FPC 7
PIC 0
PIC 1
PIC 2
PIC 3
SIB 0
SIB 1
SIB 2
SIB 3
Fan Tray 0
Fan Tray 1
Fan Tray 2
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
04
03
02
10
10
07
07
10
07
07
750-001894
750-001894
710-010419
750-005634
750-005634
750-005634
750-005634
750-005634
750-005634
750-005634
PB-1GE-SX
PB-1GE-SX
M320-FPC1
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
REV
REV
REV
REV
REV
REV
03
04
04
02
02
02
750-001895
750-001894
750-003141
710-010419
710-010419
710-010419
PB-1OC12-SON-MM
PB-1GE-SX
PB-1GE-SX-B
M320-FPC1
M320-FPC1
M320-FPC1
REV
REV
REV
REV
REV
REV
REV
REV
15
06
07
05
03
03
03
03
750-001901
750-001900
750-001900
750-003737
710-009184
710-009184
710-009184
710-009184
PB-4OC12-SON-SMIR
PB-1OC48-SON-SMSR
PB-1OC48-SON-SMSR
PB-4GE-SX
SIB-M-S
SIB-M-S
SIB-M-S
SIB-M-S
FFANTRAY-M320-S
FFANTRAY-M320-S
RFANTRAY-M320-S
show chassis hardware detail (M160 Router)
user@host> show chassis hardware detail
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 02
710-001245
FPM CMB
REV 01
710-001642
FPM Display
REV 01
710-001647
CIP
REV 02
710-001593
PEM 0
Rev 01
740-001243
PEM 1
Rev 01
740-001243
PCG 0
REV 01
710-001568
PCG 1
REV 01
710-001568
Host 1
MCS 1
REV 03
710-001226
SFM 0 SPP
REV 04
710-001228
SFM 0 SPR
REV 02
710-001224
SSRAM bank 0
REV 01
710-000077
SSRAM bank 1
REV 01
710-000077
SSRAM bank 2
REV 01
710-000077
SSRAM bank 3
REV 01
710-000077
SFM 1 SPP
REV 04
710-001228
SFM 1 SPR
REV 01
710-001224
SSRAM bank 0
REV 01
710-000077
SSRAM bank 1
REV 01
710-000077
SSRAM bank 2
REV 01
710-000077
SSRAM bank 3
REV 01
710-000077
FPC 0
REV 03
710-001255
CPU
REV 02
710-001217
SSRAM
REV 01
710-000077
Copyright © 2013, Juniper Networks, Inc.
Serial number
101
S/N AB4107
S/N AA2911
S/N AA2999
S/N AA9563
S/N KJ35769
S/N KJ35765
S/N AA9794
S/N AA9804
da000004f8d57001
S/N AA9777
S/N AA2975
S/N AA9838
S/N 306456
S/N 306474
S/N 306388
S/N 306392
S/N AA2860
S/N AB0139
S/N 302917
S/N 302662
S/N 302593
S/N 100160
S/N AA9806
S/N AA9590
S/N 302836
Description
M160
DC
DC
teknor
Internet Processor I
1 MB
1 MB
1 MB
1 MB
Internet Processor I
1 MB
1 MB
1 MB
1 MB
FPC Type 1
1 MB
489
PTX Series Packet Transport Switch Software Documentation
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
PIC 1
PIC 2
PIC 3
FPC 1
CPU
SSRAM
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
SSRAM
SDRAM 0
SDRAM 1
PIC 0
PIC 1
FPC 2
... SSRAM
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
01
01
01
05
05
01
02
02
01
01
01
01
01
01
01
01
01
01
01
01
03
01
REV 01
710-001196
710-001196
710-000077
710-001196
710-001196
710-000077
710-001196
710-001196
710-000077
710-001196
710-001196
750-000616
750-000616
750-000616
710-001611
710-001217
710-000077
710-001196
710-001196
710-000077
710-001196
710-001196
710-000077
710-001196
710-001196
710-000077
710-001196
710-001196
750-001900
710-002381
710-000077
S00141
S0010;
S/N 302633
S00143
S00115
S/N 302952
S00135
S001=3
S/N 302892
S000?6
S001=5
S/N AA1527
S/N AA1535
S/N AA1519
S/N AA9523
S/N AA9571
S/N 306340
S00012
S0001?
S/N 306454
S00028
S0002?
S/N 306492
S00015
S00031
S/N 306363
S00013
S00032
S/N AA9626
S/N AD3633
32 MB
32 MB
1 MB
32 MB
32 MB
1 MB
32 MB
32 MB
1 MB
32 MB
32 MB
1x OC-12
1x OC-12
1x OC-12
FPC Type
S/N 306466
ATM, MM
ATM, MM
ATM, MM
2
1 MB
32 MB
32 MB
1 MB
32 MB
32 MB
1 MB
32 MB
32 MB
1 MB
32 MB
32 MB
1x STM-16 SDH, SMIR
2x G/E, 1000 BASE-SX
FPC Type OC192
1 MB
show chassis hardware (M320 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 05
710-009120
FPM GBUS
REV 04
710-005928
FPM Display
REV 05
710-009351
CIP
REV 04
710-005926
PEM 0
Rev 05
740-009148
PEM 1
Rev 05
740-009148
PEM 2
Rev 05
740-009148
PEM 3
Rev 05
740-009148
Routing Engine 0 REV 06
740-008883
CB 0
REV 07
710-009115
FPC 0
REV 02
710-005017
CPU
REV 01
710-011659
PIC 0
REV 07
750-001900
PIC 1
REV 03
750-001850
PIC 2
REV 05
750-010618
PIC 3
REV 06
750-001900
FPC 2
REV 02
710-005017
CPU
REV 01
710-011659
PIC 0
REV 05
750-003034
FPC 5
REV 02
710-005017
CPU
FPC 7
REV 02
710-005017
490
Serial number
67245
RB1202
HZ5697
HR1464
HT8672
QK34208
QK34262
QF10449
QJ18257
P11123901185
JB2382
CD9926
CJ6940
AT1594
HS2746
JE7117
HE6083
CH0319
CJ6942
BD8705
CD9938
Description
M320
M320 Midplane
M320 Board
M320 FPM Display
M320 CIP
DC Power Entry Module
DC Power Entry Module
DC Power Entry Module
DC Power Entry Module
RE-4.0
M320 Control Board
M320 FPC Type 2
M320 PCA SCPU
1x OC-48 SONET, SMSR
1x Tunnel
4x G/E SFP, 1000 BASE
1x OC-48 SONET, SMSR
M320 FPC Type 1
M320 PCA SCPU
4x OC-3 SONET, SMIR
M320 FPC Type 2
CD9934
M320 FPC Type 2
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CPU
SIB 0
SIB 1
SIB 2
SIB 3
Fan Tray 0
Fan Tray 1
Fan Tray 2
REV
REV
REV
REV
09
09
09
09
710-009184
710-009184
710-009184
710-009184
JA6540
HV9511
HW2057
JA6687
M320 SIB
M320 SIB
M320 SIB
M320 SIB
Front Top Fan Tray
Front Bottom Fan Tray
Rear Fan Tray
CLEI code
FRU model number
CHAS-BP-M320-S
CRAFT-M320-S
CIP-M320-S
PWR-M-DC-S
PWR-M-DC-S
RE-1600-2048-S
RE-1600-2048-S
M320-FPC1
P-TUNNEL
PE-1OC12-SON-SMIR
PB-1GE-SX
PB-1OC12-SON-SMIR
M320-FPC1
PB-1GE-SX
PB-1GE-SX
PB-1GE-SX
M320-FPC1
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
PB-1CHOC12SMIR-QPP
show chassis hardware models (M320 Router)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Midplane
REV 03
710-009120
FPM Display
REV 02
710-009351
CIP
REV 03
710-005926
PEM 2
Rev X4
740-009148
PEM 3
Rev X4
740-009148
Routing Engine 0 REV 02
740-008883
Routing Engine 1 REV 02
740-008883
FPC 0
REV 02
710-010419
PIC 0
REV 01
750-001323
PIC 1
REV 02
750-002987
PIC 2
REV 04
750-001894
PIC 3
REV 04
750-001896
FPC 1
REV 02
710-010419
PIC 0
REV 04
750-001894
PIC 1
REV 04
750-001894
PIC 3
REV 03
750-001894
FPC 2
REV 02
710-010419
PIC 0
REV 10
750-005634
PIC 1
REV 10
750-005634
PIC 2
REV 07
750-005634
PIC 3
REV 07
750-005634
PIC 1
REV 10
750-005634
PIC 2
REV 07
750-005634
PIC 3
REV 07
750-005634
FPC 3
PIC 0
REV 03
750-001895
PIC 1
REV 04
750-001894
PIC 3
REV 04
750-003141
FPC 4
REV 02
710-010419
FPC 5
REV 02
710-010419
FPC 6
REV 02
710-010419
FPC 7
PIC 0
REV 15
750-001901
PIC 1
REV 06
750-001900
PIC 2
REV 07
750-001900
PIC 3
REV 05
750-003737
SIB 0
REV 03
710-009184
SIB 1
REV 03
710-009184
SIB 2
REV 03
710-009184
SIB 3
REV 03
710-009184
Fan Tray 0
Fan Tray 1
Fan Tray 2
PB-1OC12-SON-MM
PB-1GE-SX
PB-1GE-SX-B
M320-FPC1
M320-FPC1
M320-FPC1
PB-4OC12-SON-SMIR
PB-1OC48-SON-SMSR
PB-1OC48-SON-SMSR
PB-4GE-SX
SIB-M-S
SIB-M-S
SIB-M-S
SIB-M-S
FFANTRAY-M320-S
FFANTRAY-M320-S
RFANTRAY-M320-S
show chassis hardware (MX5 Router)
user@host> show chassis hardware
Copyright © 2013, Juniper Networks, Inc.
491
PTX Series Packet Transport Switch Software Documentation
Hardware inventory:
Item
Version
Chassis
Midplane
REV 01
PEM 0
Rev 04
PEM 1
Rev 04
Routing Engine
TFEB 0
Processor
QXM 0
REV 05
FPC 0
MIC 0
PIC 0
FPC 1
MIC 0
REV 24
PIC 0
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
Xcvr 4
REV 01
Xcvr 9
REV 01
PIC 1
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
Xcvr 4
REV 01
Xcvr 5
REV 01
Xcvr 6
REV 01
Xcvr 7
REV 01
Xcvr 8
REV 01
Xcvr 9
REV 01
MIC 1
REV 20
PIC 2
PIC 3
Fan Tray
Part number
711-038215
740-028288
740-028288
BUILTIN
BUILTIN
Serial number
E1368
YF5288
VA01215
VA01218
BUILTIN
BUILTIN
Description
MX5-T
MX5-T
AC Power Entry Module
AC Power Entry Module
Routing Engine
Forwarding Engine
711-028408
BUILTIN
BUILTIN
BUILTIN
BUILTIN
750-028392
BUILTIN
740-031851
740-031851
740-031851
740-031851
740-031851
740-011613
BUILTIN
740-031851
740-011613
740-011613
740-011613
740-011613
740-011782
740-011613
740-011613
740-011613
740-011782
750-028380
BUILTIN
BUILTIN
ZA9136
BUILTIN
BUILTIN
BUILTIN
BUILTIN
YX9820
BUILTIN
AM1045SUAQ3
AM1045SUAPA
AM1045SUAN7
AM1045SU91Q
AM1045SUDDR
AM0848SB6A1
BUILTIN
AM1045SUAN0
AS0812S0719
AM0821SA121
PF21K21
AM0848SB69Z
P9P0XV3
AM0812S8WJN
PAM3G9Q
AM0848SB4A6
P9M0U37
ZG2657
BUILTIN
BUILTIN
MPC QXM
MPC BUILTIN
4x 10GE XFP
4x 10GE XFP
MPC BUILTIN
3D 20x 1GE(LAN) SFP
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
3D 2x 10GE XFP
1x 10GE XFP
1x 10GE XFP
Fan Tray
Serial number
E1372
YF5285
VB01678
BUILTIN
BUILTIN
Description
MX10-T
MX10-T
AC Power Entry Module
Routing Engine
Forwarding Engine
ZA9053
BUILTIN
BUILTIN
BUILTIN
BUILTIN
YX9436
BUILTIN
AM1107SUFQW
BUILTIN
MPC QXM
MPC BUILTIN
4x 10GE XFP
4x 10GE XFP
MPC BUILTIN
3D 20x 1GE(LAN) SFP
10x 1GE(LAN) SFP
SFP-SX
10x 1GE(LAN) SFP
Fan Tray
show chassis hardware (MX10 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
711-038211
PEM 0
Rev 04
740-028288
Routing Engine
BUILTIN
TFEB 0
BUILTIN
Processor
QXM 0
REV 05
711-028408
FPC 0
BUILTIN
MIC 0
BUILTIN
PIC 0
BUILTIN
FPC 1
BUILTIN
MIC 0
REV 24
750-028392
PIC 0
BUILTIN
Xcvr 0
REV 01
740-031851
PIC 1
BUILTIN
Fan Tray
492
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
show chassis hardware (MX40 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
711-038211
PEM 0
Rev 04
740-028288
PEM 1
Rev 04
740-028288
Routing Engine
BUILTIN
TFEB 0
BUILTIN
Processor
QXM 0
REV 05
711-028408
FPC 0
BUILTIN
MIC 0
BUILTIN
PIC 0
BUILTIN
Xcvr 0
REV 01
740-014279
Xcvr 1
NON-JNPR
FPC 1
BUILTIN
MIC 0
REV 24
750-028392
PIC 0
BUILTIN
Xcvr 0
REV 01
740-011613
Xcvr 1
REV 01
740-011613
Xcvr 2
REV 01
740-031851
Xcvr 3
REV 01
740-011613
Xcvr 4
REV 01
740-011613
Xcvr 5
REV 02
740-011613
Xcvr 6
REV 01
740-011782
Xcvr 7
REV 01
740-011782
Xcvr 8
REV 01
740-011613
Xcvr 9
REV 01
740-031851
PIC 1
BUILTIN
Xcvr 0
REV 01
740-011613
Xcvr 1
REV 01
740-031851
Xcvr 2
REV 01
740-031851
Xcvr 3
REV 01
740-011613
Xcvr 4
REV 01
740-031851
Xcvr 5
REV 01
740-031851
Xcvr 6
REV 01
740-031851
Xcvr 8
REV 01
740-011613
Xcvr 9
REV 01
740-011613
MIC 1
REV 01
750-021130
PIC 2
BUILTIN
Xcvr 0
REV 01
740-011571
PIC 3
BUILTIN
Xcvr 0
NON-JNPR
Fan Tray
Serial number
E1367
YF5284
VB01680
VB01700
BUILTIN
BUILTIN
Description
MX40-T
MX40-T
AC Power Entry Module
AC Power Entry Module
Routing Engine
Forwarding Engine
ZA9048
BUILTIN
BUILTIN
BUILTIN
M7067UPP
K9J02UN
BUILTIN
YX3504
BUILTIN
AM0812S8WTE
PFA6KV2
AM1045SUDDM
PD63C7M
PD63DJY
AA0950STLL9
PAR1YHC
P9P0XXL
PD63D95
AM1045SU9B8
BUILTIN
PF21L3Z
AM1045SU7M9
AM1045SUAPT
PFF2BZH
AM1045SUDDN
AM1039S00ZR
AM1045SUD6Y
PFM1QBS
PFF2E25
KG4391
BUILTIN
C645XJ04G
BUILTIN
CA49BK0AE
MPC QXM
MPC BUILTIN
4x 10GE XFP
4x 10GE XFP
XFP-10G-LR
XFP-10G-LR
MPC BUILTIN
3D 20x 1GE(LAN) SFP
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
3D 2x 10GE XFP
1x 10GE XFP
XFP-10G-SR
1x 10GE XFP
XFP-10G-SR
Fan Tray
Serial number
Description
MX80-48T
MX80-48T
Routing Engine
Forwarding Engine Board
MPC BUILTIN
4x 10GE XFP
4x 10GE XFP
XFP-10G-LR
show chassis hardware (Fixed MX80 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
711-031603
Routing Engine
BUILTIN
FEB 0
BUILTIN
FPC 0
BUILTIN
MIC 0
BUILTIN
PIC 0
BUILTIN
Xcvr 0
NON-JNPR
Copyright © 2013, Juniper Networks, Inc.
KF9250
BUILTIN
BUILTIN
BUILTIN
BUILTIN
BUILTIN
M6439D41
493
PTX Series Packet Transport Switch Software Documentation
Xcvr 1
Xcvr 2
Xcvr 3
FPC 1
MIC 0
PIC 0
PIC 1
MIC 1
PIC 2
PIC 3
Fan Tray
REV 01
REV 01
REV 01
REV 01
REV 01
740-014279
740-014289
740-014289
BUILTIN
711-029399
BUILTIN
BUILTIN
BUILTIN
BUILTIN
BUILTIN
6XE931N00202
C715XU05F
C650XU0EP
BUILTIN
JR6981
BUILTIN
BUILTIN
BUILTIN
BUILTIN
BUILTIN
XFP-10G-LR
XFP-10G-SR
XFP-10G-SR
MPC BUILTIN
12x 1GE(LAN)
12x 1GE(LAN)
12x 1GE(LAN)
12x 1GE(LAN)
12x 1GE(LAN)
12x 1GE(LAN)
Fan Tray
Part number
Serial number
711-031594
740-028288
BUILTIN
BUILTIN
JR7084
000018
BUILTIN
BUILTIN
Description
MX80
MX80
AC Power Entry Module
Routing Engine
Forwarding Engine Board
711-028408
BUILTIN
BUILTIN
BUILTIN
BUILTIN
750-028380
BUILTIN
740-014289
BUILTIN
740-014289
750-028380
BUILTIN
740-014289
BUILTIN
740-014289
JR7041
BUILTIN
BUILTIN
BUILTIN
BUILTIN
JR6598
BUILTIN
T07M86365
BUILTIN
T07M71094
JG8548
BUILTIN
T08L86302
BUILTIN
C810XU0BA
MPC QXM
MPC BUILTIN
4x 10GE XFP
4x 10GE XFP
MPC BUILTIN
3D 2x 10GE XFP
1x 10GE XFP
XFP-10G-SR
1x 10GE XFP
XFP-10G-SR
3D 2x 10GE XFP
1x 10GE XFP
XFP-10G-SR
1x 10GE XFP
XFP-10G-SR
Fan Tray
Serial number
JN10C7F7EAFC
TR1502
KD4017
000332
Description
MX240
MX240 Backplane
Front Panel Display
PS 1.2-1.7kW; 100-240V
000226
PS 1.2-1.7kW; 100-240V
1000703522
1000687625
KC9057
JY4760
KC7340
KD4078
BUILTIN
P9F18ME
RE-S-2000
RE-S-1300
MX SCB
MX SCB
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
SFP-SX
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
show chassis hardware (Modular MX80 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version
Chassis
Midplane
REV 02
PEM 0
Rev 01
Routing Engine
FEB 0
QXM 0
FPC 0
MIC 0
PIC 0
FPC 1
MIC 0
PIC 0
Xcvr
PIC 1
Xcvr
MIC 1
PIC 2
Xcvr
PIC 3
Xcvr
Fan Tray
REV 05
REV 02
0
REV 01
0
REV 01
REV 02
0
REV 02
0
REV 02
show chassis hardware (MX240 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-021041
FPM Board
REV 01
710-017254
PEM 0
Rev 02
740-017330
AC in
PEM 1
Rev 02
740-017330
AC in
Routing Engine 0 REV 06
740-013063
Routing Engine 1 REV 06
740-015113
CB 0
REV 07
710-013385
CB 1
REV 05
710-013385
FPC 1
REV 01
750-021679
CPU
REV 06
710-013713
PIC 0
BUILTIN
Xcvr 0
REV 01
740-011613
494
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PIC 1
PIC 2
PIC 3
FPC 2
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
Fan Tray
REV 04
REV 06
0
1
2
3
4
REV
REV
REV
REV
REV
01
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
0
REV
REV
REV
REV
REV
01
01
01
01
01
BUILTIN
BUILTIN
BUILTIN
710-016669
710-013713
BUILTIN
740-011613
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
710-021113
BUILTIN
BUILTIN
BUILTIN
JS4529
KB3969
BUILTIN
PBG3Y79
PBG3XU8
PBG3YG6
PBG3XUG
PBG3XTJ
BUILTIN
PBG3ZUM
PBG3Y5H
PBG3UZT
PBG3US1
BUILTIN
PBG3YG7
PBG3XZ9
PBG3XTY
PBG3UZG
BUILTIN
PBG3Y8W
PBG3YVX
PBG3YB3
PBG43VQ
JS4642
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
DPCE 40x 1GE R EQ
DPC PMB
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
MX240 Fan Tray
show chassis hardware detail (MX240 Router with RE Displaying DIMM information)
user@host> show chassis hardware detail
Item
Version Part number Serial number
Chassis
JN11279B4AFC
Midplane
REV 07
760-021404
TS2474
FPM Board
REV 03
760-021392
XC2643
PEM 0
Rev 03
740-017343
QCS0908A068
Routing Engine 0 REV 01
740-031117
AARCHOO
ad0
3764 MB STEC M2+ CF 9.0.2
STIM2Q3209239145303
ad1
28626 MB
usb0 (addr 1)
usb0 (addr 2)
DIMM 0
DIMM 1
DIMM 2
DIMM 3
CB 0
Fan Tray 0
Description
MX240 Backplane
MX240 Backplane
Front Panel Display
DC Power Entry Module
RE-S-1800x4
Removable Compact Flash
WDC SSD-F0030S-5000 C933Z036237215548S00 Compact Flash
EHCI root hub 0
Intel
uhub0
product 0x0020 32
vendor 0x8087
uhub1
VL31B5263E-F8S DIE REV-0 PCB REV-0
MFR ID-ce80
VL31B5263E-F8S DIE REV-0 PCB REV-0
MFR ID-ce80
VL31B5263E-F8S DIE REV-0 PCB REV-0
MFR ID-ce80
SL31B5263E-F8S DIE REV-0 PCB REV-0
MFR ID-ce80
REV 03
710-021523
XD7225
MX SCB
REV 01
710-021113
WZ4986
MX240 Fan Tray
show chassis hardware (MX240 Router with Enhanced MX SCB)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-021041
FPM Board
REV 01
710-017254
PEM 0
Rev 02
740-017330
AC in
PEM 1
Rev 02
740-017330
AC in
Copyright © 2013, Juniper Networks, Inc.
Serial number
JN10C7F7EAFC
TR1502
KD4017
000332
Description
MX240
MX240 Backplane
Front Panel Display
PS 1.2-1.7kW; 100-240V
000226
PS 1.2-1.7kW; 100-240V
495
PTX Series Packet Transport Switch Software Documentation
Routing Engine 0 REV 06
Routing Engine 1 REV 06
CB 0
REV 02
CB 1
REV 05
FPC 1
REV 01
CPU
REV 06
PIC 0
Xcvr 0
REV 01
PIC 1
PIC 2
PIC 3
FPC 2
REV 04
CPU
REV 06
PIC 0
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
Xcvr 4
REV 01
PIC 1
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 2
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 3
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
Fan Tray 0
REV 01
740-013063
740-015113
710-031391
710-031391
750-021679
710-013713
BUILTIN
740-011613
BUILTIN
BUILTIN
BUILTIN
710-016669
710-013713
BUILTIN
740-011613
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
710-021113
1000703522
1000687625
YE8494
YOP5764
KC7340
KD4078
BUILTIN
P9F18ME
BUILTIN
BUILTIN
BUILTIN
JS4529
KB3969
BUILTIN
PBG3Y79
PBG3XU8
PBG3YG6
PBG3XUG
PBG3XTJ
BUILTIN
PBG3ZUM
PBG3Y5H
PBG3UZT
PBG3US1
BUILTIN
PBG3YG7
PBG3XZ9
PBG3XTY
PBG3UZG
BUILTIN
PBG3Y8W
PBG3YVX
PBG3YB3
PBG43VQ
JS4642
RE-S-2000
RE-S-1300
Enhanced MX SCB
Enhanced MX SCB
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
SFP-SX
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
DPCE 40x 1GE R EQ
DPC PMB
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) EQ
SFP-SX
SFP-SX
SFP-SX
SFP-SX
MX240 Fan Tray
Serial number
JN10C7F7FAFB
TR2071
KB8459
QCS07519029
Description
MX480
MX480 Midplane
Front Panel Display
PS 1.2-1.7kW; 100-240V
QCS07519041
PS 1.2-1.7kW; 100-240V
QCS07519097
PS 1.2-1.7kW; 100-240V
1000733381
1000733540
KA8022
KA8303
KA8660
KA8185
BUILTIN
BUILTIN
BUILTIN
RE-S-2000
RE-S-2000
MX SCB
MX SCB
DPCE 40x 1GE
DPC PMB
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
show chassis hardware (MX480 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 04
710-017414
FPM Board
REV 02
710-017254
PEM 0
Rev 02
740-017330
AC in
PEM 1
Rev 02
740-017330
AC in
PEM 2
Rev 02
740-017330
AC in
Routing Engine 0 REV 07
740-013063
Routing Engine 1 REV 07
740-013063
CB 0
REV 07
710-013385
CB 1
REV 07
710-013385
FPC 0
REV 09
750-020452
CPU
REV 06
710-013713
PIC 0
BUILTIN
PIC 1
BUILTIN
PIC 2
BUILTIN
496
X EQ
EQ
EQ
EQ
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PIC 3
Fan Tray
BUILTIN
BUILTIN
10x 1GE(LAN) EQ
Left Fan Tray
Serial number
JN10C7F7FAFB
TR2071
KB8459
QCS07519029
Description
MX480
MX480 Midplane
Front Panel Display
PS 1.2-1.7kW; 100-240V
QCS07519041
PS 1.2-1.7kW; 100-240V
QCS07519097
PS 1.2-1.7kW; 100-240V
1000733381
1000733540
KA8022
KA8303
KA8660
KA8185
BUILTIN
BUILTIN
BUILTIN
BUILTIN
RE-S-2000
RE-S-2000
Enhanced MX SCB
Enhanced MX SCB
DPCE 40x 1GE X EQ
DPC PMB
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
10x 1GE(LAN) EQ
Left Fan Tray
Serial number
AA6082
000008
Description
MX960
MX960 Midplane
Power Inlet Module
000038
1000617944
JK6947
JM7617
PS 1.7kW; 200-240VAC in
RE-S-1300
MX960 Test SCB
MX960 Test DPC
BUILTIN
BUILTIN
JL9634
1x 10GE(LAN/WAN)
10x 1GE
MX960 Test DPC
BUILTIN
MYBG65I82C
BUILTIN
P7N0368
P8J1W27
P8J1VSD
P8J1W25
1x 10GE(LAN/WAN)
XFP-10G-SR
10x 1GE
SFP-SX
SFP-SX
SFP-SX
SFP-SX
Serial number
Description
show chassis hardware (MX480 Router with Enhanced MX SCB)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 04
710-017414
FPM Board
REV 02
710-017254
PEM 0
Rev 02
740-017330
AC in
PEM 1
Rev 02
740-017330
AC in
PEM 2
Rev 02
740-017330
AC in
Routing Engine 0 REV 07
740-013063
Routing Engine 1 REV 07
740-013063
CB 0
REV 07
710-013385
CB 1
REV 07
710-013385
FPC 0
REV 09
750-020452
CPU
REV 06
710-013713
PIC 0
BUILTIN
PIC 1
BUILTIN
PIC 2
BUILTIN
PIC 3
BUILTIN
Fan Tray
show chassis hardware (MX960 Router)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-013698
PIM
Rev 01
740-013110
PEM 2
PEM 3
Rev 01
740-013682
Routing Engine 0 REV 00
740-015113
CB 0
REV 05
710-013725
FPC 4
REV 01
710-013305
CPU
PIC 0
BUILTIN
PIC 1
BUILTIN
FPC 7
REV 01
710-013305
CPU
PIC 0
BUILTIN
Xcvr 0
NON-JNPR
PIC 1
BUILTIN
Xcvr 1
REV 01
740-011782
Xcvr 4
REV 01
740-011782
Xcvr 6
REV 01
740-011782
Xcvr 9
REV 01
740-011782
Fan Tray 0
Fan Tray 1
show chassis hardware (MX960 Router with Bidirectional Optics)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number
Copyright © 2013, Juniper Networks, Inc.
497
PTX Series Packet Transport Switch Software Documentation
Chassis
JN10BA5B9AFA
Midplane
REV 03
710-013698
TR0234
FPM Board
REV 03
710-014974
JA0878
PDM
Rev 03
740-013110
QCS11135028
PEM 0
Rev 03
740-013682
QCS11154036
PEM 1
Rev 03
740-013682
QCS11154010
PEM 2
Rev 03
740-013682
QCS11154022
Routing Engine 0 REV 06
740-013063
1000691458
CB 0
REV 07
710-013385
KA2190
CB 1
REV 07
710-013385
KA0837
FPC 3
REV 02
750-018122
KB3890
CPU
FPC 4
REV 01
750-018122
KB3889
CPU
REV 06
710-013713
KB3976
PIC 0
BUILTIN
BUILTIN
Xcvr 1
REV 01
740-020426
4910549
Xcvr 2
REV 01
740-020426
4910551
Xcvr 5
REV 01
740-021340
77E245N00006
Xcvr 6
REV 01
740-020425
4882821
Xcvr 8
REV 01
740-020425
4882820
PIC 1
BUILTIN
BUILTIN
Xcvr 0
REV 01
740-020465
77E555N00894
Xcvr 1
REV 01
740-020465
75E467X00818
Xcvr 2
REV 01
740-020465
75E467X00573
Xcvr 3
REV 01
740-020465
4888227
Xcvr 4
REV 01
740-020465
4888241
Xcvr 5
REV 01
740-021340
77E245N00005
Xcvr 6
REV 01
740-021340
76E245X00487
Xcvr 7
REV 01
740-021341
5255889
Xcvr 8
REV 01
740-021341
5255887
Xcvr 9
REV 01
740-021340
77E245N00004
PIC 2
BUILTIN
BUILTIN
Xcvr 0
REV 01
740-020424
5007582
Xcvr 1
REV 01
740-020424
4888187
Xcvr 2
REV 01
740-020424
4656500
Xcvr 5
REV 01
740-021341
5255886
Xcvr 7
REV 01
740-021340
77E245N00003
Xcvr 8
REV 01
740-021341
5255888
PIC 3
BUILTIN
BUILTIN
Xcvr 0
REV 01
740-017726
74S184H30341
Xcvr 1
REV 01
740-017726
4814061
Xcvr 5
REV 01
740-017726
6ZS184H31108
Xcvr 9
REV 01
740-021340
76E245X00486
Fan Tray 0
Fan Tray 1
REV 03
740-014971
TP0850
MX960
MX960 Backplane
Front Panel Display
Power Distribution Module
PS 1.7kW; 200-240VAC in
PS 1.7kW; 200-240VAC in
PS 1.7kW; 200-240VAC in
RE-S-2000
MX SCB
MX SCB
DPCE 40x 1GE R
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
SFP-1000BASE-BX40-D
SFP-1000BASE-BX40-D
SFP-1000BASE-BX10-U
SFP-1000BASE-BX40-U
SFP-1000BASE-BX40-U
10x 1GE(LAN)
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
10x 1GE(LAN)
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-D
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
SFP-1000BASE-BX10-U
10x 1GE(LAN)
SFP-EX
SFP-EX
SFP-EX
SFP-1000BASE-BX10-U
Fan Tray
show chassis hardware (MX960 Router with Enhanced MX SCB)
user@host> show chassis hardware
Hardware inventory:
Item
Version Part number Serial number
Chassis
JN1096805AFA
Midplane
REV 03
710-013698
TR0183
Fan Extender
REV 02
710-018051
JY5227
FPM Board
REV 03
710-014974
JZ6876
PDM
Rev 03
740-013110
QCS11035023
PEM 1
Rev 03
740-013682
QCS1109400L
PEM 2
Rev 03
740-013682
QCS11094015
PEM 3
Rev 03
740-013682
QCS11094012
Routing Engine 0 REV 06
740-013063
1000687969
Routing Engine 1 REV 06
740-013063
1000687955
498
Description
MX960
MX960 Backplane
Extended Cable Manager
Front Panel Display
Power Distribution Module
PS 1.7kW; 200-240VAC in
PS 1.7kW; 200-240VAC in
PS 1.7kW; 200-240VAC in
RE-S-2000
RE-S-2000
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CB 0
CB 1
CB 2
FPC 0
CPU
PIC 0
Xcvr 0
Xcvr 2
Xcvr 7
Xcvr 9
PIC 1
Xcvr 0
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 5
Xcvr 9
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 6
Xcvr 7
FPC 1
CPU
MIC 0
PIC 0
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
MIC 1
PIC 2
Xcvr
Xcvr
PIC 3
FPC 2
CPU
PIC 0
PIC 1
PIC 2
Xcvr 0
PIC 3
FPC 3
CPU
PIC 0
Xcvr 1
Xcvr 3
PIC 1
FPC 5
CPU
PIC 0
Xcvr 1
PIC 1
PIC 2
PIC 3
FPC 7
CPU
MIC 0
Copyright © 2013, Juniper Networks, Inc.
REV
REV
REV
REV
REV
11
11
11
01
06
REV
REV
REV
REV
01
01
01
01
REV 01
REV
REV
REV
REV
REV
01
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
16
06
07
0
1
REV 01
REV 02
0
1
REV 01
REV 01
REV 24
0
1
REV 02
REV 01
REV 08
REV 06
REV 03
REV
REV
REV
REV
REV
REV
REV
REV
10
03
17
01
01
32
25
10
REV 01
REV 02
REV 01
REV 08
750-031391
750-031391
750-031391
750-018122
710-013713
BUILTIN
740-011613
740-011782
740-011782
740-011782
BUILTIN
740-011613
BUILTIN
740-011613
740-011613
740-011613
740-011613
740-011782
BUILTIN
740-026192
740-026193
740-011613
740-011782
740-011782
750-031089
711-030884
750-028387
BUILTIN
740-014279
740-014289
BUILTIN
740-014279
740-014289
750-028387
BUILTIN
740-014279
740-014289
BUILTIN
710-014219
710-013713
BUILTIN
BUILTIN
BUILTIN
740-011571
BUILTIN
750-024199
710-022351
750-009553
740-011785
740-011785
750-003700
750-028467
711-029089
BUILTIN
740-031980
BUILTIN
BUILTIN
BUILTIN
750-031092
711-030884
750-028392
YZ6072
YZ6068
YZ6081
KA5576
KB3961
BUILTIN
P9F18GF
P9M0TL9
P9P0XXH
P9M0TN1
BUILTIN
PAJ4UHC
BUILTIN
PFF2CD0
PBG3ZUT
PFF2DDV
P8E2SST
PB8329N
BUILTIN
1U0201084503342
1U1201084503313
PAJ4Y5B
P9M0U3M
P9M0TLA
YL0719
YL1463
JR6500
BUILTIN
733019A00154
T09F55034
BUILTIN
913019B00791
98S803A90384
YJ3950
BUILTIN
T10B36134
T07M86354
BUILTIN
JY9654
JZ6549
BUILTIN
BUILTIN
BUILTIN
C931BK028
BUILTIN
XJ6692
XF5182
RJ2945
PCP3YLL
PDS0MRY
DP2113
YM8256
YL3029
BUILTIN
AHN0X1Z
BUILTIN
BUILTIN
BUILTIN
JR6658
JZ9038
JZ8737
Enhanced MX SCB
Enhanced MX SCB
Enhanced MX SCB
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN)
SFP-SX
10x 1GE(LAN)
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN)
SFP-100BASE-BX10-U
SFP-100BASE-BX10-D
SFP-SX
SFP-SX
SFP-SX
MPC Type 2 3D
MPC PMB 2G
3D 4x 10GE XFP
2x 10GE XFP
XFP-10G-LR
XFP-10G-SR
2x 10GE XFP
XFP-10G-LR
XFP-10G-SR
3D 4x 10GE XFP
2x 10GE XFP
XFP-10G-LR
XFP-10G-SR
2x 10GE XFP
DPCE 4x 10GE R
DPC PMB
1x 10GE(LAN/WAN)
1x 10GE(LAN/WAN)
1x 10GE(LAN/WAN)
XFP-10G-SR
1x 10GE(LAN/WAN)
MX FPC Type 3
DPC PMB
4x OC-48 SONET
SFP-SR
SFP-SR
1x OC-192 12xMM VSR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
MPC Type 1 3D Q
MPC PMB 2G
3D 20x 1GE(LAN) SFP
499
PTX Series Packet Transport Switch Software Documentation
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
QXM 0
FPC 8
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
PIC 1
Xcvr 0
Xcvr 3
FPC 10
CPU
PIC 0
Xcvr 5
Xcvr 6
PIC 1
PIC 2
Xcvr 0
Xcvr 5
Xcvr 6
Xcvr 8
PIC 3
Fan Tray 0
Fan Tray 1
0
2
4
7
8
REV 01
0
1
9
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
04
05
03
08
01
REV
REV
REV
REV
REV
REV
01
08
01
01
04
05
REV 01
REV 01
REV 01
REV 01
REV 01
REV
REV
REV
REV
01
01
01
01
REV 03
REV 03
BUILTIN
740-011782
NON-JNPR
740-011613
740-011613
740-011613
BUILTIN
740-011782
740-011613
740-011613
711-028408
750-024387
710-022351
750-014730
740-016065
NON-JNPR
740-011618
750-014637
740-011785
740-011785
710-013699
710-013713
BUILTIN
740-011782
740-011782
BUILTIN
BUILTIN
740-011782
740-011782
740-011782
740-011782
BUILTIN
740-014971
740-014971
BUILTIN
PBE2C6Y
U8105N8
PFM18EF
PFF2AM8
PFF2CT6
BUILTIN
PB82VHH
PFF2CSW
PFF2BY0
JR6372
JW9754
KF1651
DM3664
81S290N00077
2191844
PD81EE5
DM3671
PCK3UNK
PDS0MPZ
JY4654
JS9717
BUILTIN
PAR1L72
P8N1YQ4
BUILTIN
BUILTIN
P8Q2AVL
PAR1L7B
PAR1L2J
P8N1YMY
BUILTIN
TP0567
TP0702
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
MPC QXM
MX FPC Type 2
DPC PMB
4x OC-3 1x OC-12 SFP
SFP-SR
SFP-SR
SFP-IR
4x OC-12-3 SFP
SFP-SR
SFP-SR
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
SFP-SX
SFP-SX
10x 1GE(LAN)
10x 1GE(LAN)
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN)
Fan Tray
Fan Tray
show chassis hardware models (MX960 Router with Enhanced MX SCB)
user@host> show chassis hardware models
Hardware inventory:
Item
Version Part number
Midplane
REV 03
710-013698
Fan Extender
REV 02
710-018051
FPM Board
REV 03
710-014974
Routing Engine 0 REV 06
740-013063
Routing Engine 1 REV 06
740-013063
CB 0
REV 11
750-031391
CB 1
REV 11
750-031391
CB 2
REV 11
750-031391
FPC 0
REV 01
750-018122
FPC 1
REV 16
750-031089
MIC 0
REV 07
750-028387
MIC 1
REV 24
750-028387
FPC 2
REV 08
710-014219
FPC 3
REV 10
750-024199
PIC 0
REV 17
750-009553
PIC 1
REV 32
750-003700
FPC 5
REV 25
750-028467
FPC 7
REV 02
750-031092
MIC 0
REV 08
750-028392
FPC 8
REV 05
750-024387
PIC 0
REV 08
750-014730
500
Serial number
TR0183
JY5227
JZ6876
1000687969
1000687955
YZ6072
YZ6068
YZ6081
KA5576
YL0719
JR6500
YJ3950
JY9654
XJ6692
RJ2945
DP2113
YM8256
JR6658
JZ8737
JW9754
DM3664
FRU model number
CHAS-BP-MX960-S
ECM-MX960
CRAFT-MX960-S
RE-S-2000-4096-S
RE-S-2000-4096-S
SCBE-MX-S
SCBE-MX-S
SCBE-MX-S
DPCE-R-40GE-SFP
MX-MPC2-3D
MIC-3D-4XGE-XFP
MIC-3D-4XGE-XFP
DPC-R-4XGE-XFP
MX-FPC3
PC-4OC48-SON-SFP
PC-1OC192-SON-VSR
MPC-3D-16XGE-SFPP
MX-MPC1-3D-Q
MIC-3D-20GE-SFP
MX-FPC2
PB-4OC3-1OC12-SON2-SFP
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PIC 1
FPC 10
Fan Tray 0
Fan Tray 1
REV
REV
REV
REV
08
04
03
03
750-014637
710-013699
740-014971
740-014971
DM3671
JY4654
TP0567
TP0702
PB-4OC3-4OC12-SON-SFP
DPC-R-40GE-SFP
FFANTRAY-MX960-S
FFANTRAY-MX960-S
Serial number
AA6082
000008
Description
MX960
MX960 Midplane
Power Inlet Module
000038
1000617944
111419E1805T1141
NR0WT5925N77
JK6947
JM7617
PS 1.7kW; 200-240VAC in
RE-S-1300
Compact Flash
Hard Disk
MX960 Test SCB
MX960 Test DPC
BUILTIN
BUILTIN
JL9634
1x 10GE(LAN/WAN)
10x 1GE
MX960 Test DPC
BUILTIN
MYBG65I82C
BUILTIN
P7N0368
P8J1W27
P8J1VSD
P8J1W25
1x 10GE(LAN/WAN)
XFP-10G-SR
10x 1GE
SFP-SX
SFP-SX
SFP-SX
SFP-SX
Serial number
JN11E3217AFK
ABAB8506
ZY8296
ACAJ1388
ZX8744
VK00254
Description
MX2010
Lower Backplane
Upper Backplane
Power Midplane
Front Panel Display
DC 52V Power Supply
VG00015
DC 52V Power Supply
VH00097
DC 52V Power Supply
VJ00151
DC 52V Power Supply
VJ00149
DC 52V Power Supply
WA00008
WA00014
9009094134
9009094141
CAAB3491
CAAB3489
DC Power Dist Module
DC Power Dist Module
RE-S-1800x4
RE-S-1800x4
Control Board
Control Board
show chassis hardware detail (MX960 Router)
user@host> show chassis hardware detail
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
710-013698
PIM
Rev 01
740-013110
PEM 2
PEM 3
Rev 01
740-013682
Routing Engine 0 REV 00
740-015113
ad0
245 MB SanDisk SDCFB-256
ad2
38154 MB FUJITSU MHT2040BH
CB 0
REV 05
710-013725
FPC 4
REV 01
710-013305
CPU
PIC 0
BUILTIN
PIC 1
BUILTIN
FPC 7
REV 01
710-013305
CPU
PIC 0
BUILTIN
Xcvr 0
NON-JNPR
PIC 1
BUILTIN
Xcvr 1
REV 01
740-011782
Xcvr 4
REV 01
740-011782
Xcvr 6
REV 01
740-011782
Xcvr 9
REV 01
740-011782
Fan Tray 0
Fan Tray 1
show chassis hardware (MX2010 Router)
user@host > show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 01
750-044636
Midplane 1
REV 01
711-044557
PMP
REV 03
711-032426
FPM Board
REV 06
711-032349
PSM 4
REV 0C
740-033727
Module
PSM 5
REV 0B
740-033727
Module
PSM 6
REV 0B
740-033727
Module
PSM 7
REV 0C
740-033727
Module
PSM 8
REV 0C
740-033727
Module
PDM 0
REV 0B
740-038109
PDM 1
REV 0B
740-038109
Routing Engine 0 REV 02
740-041821
Routing Engine 1 REV 02
740-041821
CB 0
REV 08
750-040257
CB 1
REV 08
750-040257
Copyright © 2013, Juniper Networks, Inc.
501
PTX Series Packet Transport Switch Software Documentation
SPMB 0
SPMB 1
SFB 0
SFB 1
SFB 2
SFB 3
SFB 4
SFB 5
SFB 6
SFB 7
FPC 0
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
FPC 1
CPU
MIC 0
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
MIC 1
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
FPC 8
CPU
MIC 0
502
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
02
02
06
07
07
07
07
07
07
07
33
11
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
21
04
03
0
1
2
3
4
5
6
7
8
9
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
01
01
03
0
1
2
3
4
5
6
7
8
9
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
01
01
22
06
26
711-041855
711-041855
711-032385
711-032385
711-032385
711-032385
711-032385
711-032385
711-032385
711-032385
750-028467
711-029089
BUILTIN
740-021308
740-021308
740-021308
740-021308
BUILTIN
740-021308
740-021308
740-021308
740-021308
BUILTIN
740-021308
740-021308
740-021308
740-021308
BUILTIN
740-021308
740-021308
740-021308
740-021308
750-033205
711-035209
750-033307
BUILTIN
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-021308
740-021308
750-033307
BUILTIN
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-031980
740-021308
740-021308
750-031089
711-030884
750-028392
CAAA6135
CAAA6137
ZV1828
ZZ2568
ZZ2563
ZZ2564
ZZ2580
ZZ2579
CAAB4882
CAAB4898
CAAB1919
CAAB7174
BUILTIN
AMH02RE
AMH038C
AMH0390
AMG0SUA
BUILTIN
AMH0579
AMG0SGP
AMH04SV
AMH04X3
BUILTIN
AMH0135
AMH02NC
AMH02XB
AMH02PN
BUILTIN
AMH057Y
AMG0JHE
AMH02HT
AMH04V4
ZG5027
YT4780
ZV6299
BUILTIN
083363A00410
083363A00334
113363A00125
083363A00953
AHR013D
AJ40JUR
AJ40JKL
AJ30ECK
19T511100864
19T511100868
ZV6268
BUILTIN
AJC0JML
AJ403PC
AJ10N25
AJ40JF4
AJ40JSJ
AJ403V7
AJ40JN3
AJ40JSU
19T511100468
19T511101363
ZT9746
ZS1271
ABBS1150
PMB Board
PMB Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPCE Type 3D
HMPC PMB 2G
10X10GE SFPP
10X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
10X10GE SFPP
10X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC Type 2 3D
MPC PMB 2G
3D 20x 1GE(LAN) SFP
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
Xcvr
MIC 1
PIC 2
Xcvr
Xcvr
PIC 3
FPC 9
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
ADC 0
ADC 1
ADC 8
ADC 9
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
0
1
2
3
4
5
6
7
8
9
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
02
02
02
02
01
01
01
01
0
1
2
3
4
5
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
26
0
1
REV 11
REV 10
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
05
01
01
02
2A
2A
2A
2A
BUILTIN
740-031851
740-031851
740-011613
740-011613
740-011613
740-011613
740-031851
740-031851
740-031851
740-031851
BUILTIN
740-031851
740-031851
740-031851
740-031851
740-031851
740-031851
750-028387
BUILTIN
NON-JNPR
NON-JNPR
BUILTIN
750-036284
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-043596
750-043596
750-043596
750-043596
760-046960
760-046960
760-046960
760-046960
BUILTIN
PLG023C
PLG09C6
AM0950SF9L7
AM1001SFN1H
AM1001SFM9D
AM1001SFLTJ
AC1108S03L9
AC1102S00NC
AC1102S00MX
AC1102S0085
BUILTIN
AC1102S00KU
AC1102S00NG
AC1102S00K3
AC1102S008R
AM1107SUFVJ
AC1108S03LG
ABBR9582
BUILTIN
T10A91703
T09L42604
BUILTIN
ZL3591
ZL0513
BUILTIN
1YT517101825
1YT517101821
1YT517101682
ALQ13R6
BUILTIN
1YT517101828
1YT517101716
1YT517101732
ALP0TR1
BUILTIN
1YT517101741
1YT517101829
1YT517101669
ALQ14E3
BUILTIN
1YT517101826
1YT517101817
1YT517101735
ALQ159A
CAAC2073
ZV4117
ZV4107
ZW1555
ACAY0015
ACAY0019
ACAY0020
ACAY0021
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
10x 1GE(LAN) SFP
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
SFP-SX
3D 4x 10GE XFP
2x 10GE XFP
XFP-10G-SR
XFP-10G-SR
2x 10GE XFP
MPC 3D 16x 10GE EM
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
Adapter Card
Adapter Card
Adapter Card
Adapter Card
172mm FanTray - 6 Fans
172mm FanTray - 6 Fans
172mm FanTray - 6 Fans
172mm FanTray - 6 Fans
Serial number
JN11E233DAFK
ABAB9357
Description
MX2010
Lower Backplane
show chassis hardware detail (MX2010 Router)
user@host > show chassis hardware detail
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 26
750-044636
Copyright © 2013, Juniper Networks, Inc.
503
PTX Series Packet Transport Switch Software Documentation
Midplane 1
PMP
FPM Board
PSM 0
Module
PSM 1
Module
PSM 2
Module
PSM 3
Module
PSM 4
Module
PSM 5
Module
PSM 6
Module
PSM 7
Module
PSM 8
Module
PDM 0
Routing Engine 0
ad0
3831 MB
ad1
30533 MB
usb0 (addr 1)
usb0 (addr 2)
DIMM 0
DIMM 1
DIMM 2
DIMM 3
Routing Engine 1
ad0
3998 MB
ad1
30533 MB
CB 0
CB 1
SPMB 0
SPMB 1
SFB 0
SFB 1
SFB 2
SFB 3
SFB 4
SFB 5
SFB 6
SFB 7
FPC 0
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 1
Xcvr 0
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
504
REV
REV
REV
REV
01
04
08
01
711-044557
711-032426
760-044634
740-045050
ABAB8643
ACAJ1677
ABBV9726
1E02224000P
Upper Backplane
Power Midplane
Front Panel Display
DC 52V Power Supply
REV 01
740-045050
1E02224000M
DC 52V Power Supply
REV 01
740-045050
1E022240010
DC 52V Power Supply
REV 01
740-045050
1E02224000G
DC 52V Power Supply
REV 01
740-045050
1E022240013
DC 52V Power Supply
REV 01
740-045050
1E022240007
DC 52V Power Supply
REV 01
740-045050
1E02224001C
DC 52V Power Supply
REV 01
740-045050
1E02224001D
DC 52V Power Supply
REV 01
740-045050
1E02224001B
DC 52V Power Supply
REV 01
740-045234
1E262250067
DC Power Dist Module
REV 02
740-041821
9009099704
RE-S-1800x4
UGB30SFA4000T1
SFA4000T1 00000651 Compact Flash
UGB94BPH32H0S1-KCI
11000019592
Disk 1
EHCI root hub 0
Intel
uhub0
product 0x0020 32
vendor 0x8087
uhub1
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
REV 02
740-041821
9009099706
RE-S-1800x4
Virtium - TuffDrive VCF P1T0200262860208 114 Compact Flash
UGB94ARF32H0S3-KC
UNIGEN-499551-000404 Disk 1
REV 13
750-040257
CAAF8436
Control Board
REV 13
750-040257
CAAF8434
Control Board
REV 02
711-041855
ABBV3825
PMB Board
REV 02
711-041855
ABBV3833
PMB Board
REV 05
711-044466
ABBX5682
Switch Fabric Board
REV 05
711-044466
ABBX5676
Switch Fabric Board
REV 05
711-044466
ABBX5665
Switch Fabric Board
REV 05
711-044466
ABBX5699
Switch Fabric Board
REV 05
711-044466
ABBX5603
Switch Fabric Board
REV 05
711-044466
ABBX5587
Switch Fabric Board
REV 05
711-044466
ABBX5607
Switch Fabric Board
REV 05
711-044466
ABBX5669
Switch Fabric Board
REV 09
750-037355
CAAF0924
MPC Type 4-2
REV 08
711-035209
CAAB9842
HMPC PMB 2G
BUILTIN
BUILTIN
4x10GE SFPP
REV 01
740-021308
19T511101656
SFP+-10G-SR
REV 01
740-031980
AMA04RU
SFP+-10G-SR
REV 01
740-031980
193363A00558
SFP+-10G-SR
REV 01
740-031980
B10M00202
SFP+-10G-SR
BUILTIN
BUILTIN
1X100GE CFP
NON-JNPR
X12J00328
CFP-100G-SR10
BUILTIN
BUILTIN
4x10GE SFPP
REV 01
740-031980
AMA088W
SFP+-10G-SR
REV 01
740-031980
B10L04211
SFP+-10G-SR
REV 01
740-021308
19T511101602
SFP+-10G-SR
REV 01
740-031980
B10L04151
SFP+-10G-SR
BUILTIN
BUILTIN
1X100GE CFP
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr 0
FPC 1
CPU
MIC 0
PIC 0
Xcvr 0
MIC 1
PIC 2
Xcvr 0
FPC 2
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
FPC 3
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 2
Xcvr 0
Copyright © 2013, Juniper Networks, Inc.
NON-JNPR
X12J00332
REV 18
750-033205
ZE0128
REV 06
711-035209
ZG5431
REV 15
750-033199
ZP6435
BUILTIN
BUILTIN
REV 01
740-032210
J11E46118
REV 15
750-033199
ZP6442
BUILTIN
BUILTIN
REV 01
740-032210
UMN03T4
REV 16
750-037358
CAAL1001
REV 08
711-035209
CAAK7927
BUILTIN
BUILTIN
REV 01
740-031980
193363A00589
REV 01
740-021308
973152A00028
REV 01
740-031980
193363A00376
REV 01
740-021308
973152A00016
REV 01
740-031980
193363A00499
REV 01
740-021308
973152A00039
REV 01
740-031980
B11E01239
REV 01
740-021308
973152A00058
BUILTIN
BUILTIN
REV 01
740-031980
B10M00075
REV 01
740-021308
973152A00014
REV 01
740-031980
AMA0638
REV 01
740-021308
973152A00063
REV 01
740-031980
AMA0629
REV 01
740-021308
973152A00053
REV 01
740-031980
193363A00344
REV 01
740-021308
973152A00046
BUILTIN
BUILTIN
REV 01
740-031980
AMA062M
REV 01
740-021308
973152A00080
REV 01
740-031980
193363A00580
REV 01
740-021308
973152A00064
REV 01
740-031980
093363A01494
REV 01
740-021308
973152A00020
REV 01
740-031980
123363A00047
REV 01
740-021308
973152A00072
BUILTIN
BUILTIN
REV 01
740-021308
03DZ06A01033
REV 01
740-021308
973152A00022
REV 01
740-021308
03DZ06A01026
REV 01
740-021308
973152A00013
REV 01
740-021308
03DZ06A01028
REV 01
740-021308
973152A00079
REV 01
740-021308
03DZ06A01018
REV 01
740-021308
973152A00025
REV 33
750-028467
CAAF5400
REV 11
711-029089
CAAH7626
BUILTIN
BUILTIN
REV 01
740-021308
973152A00066
REV 01
740-021308
973152A00021
REV 01
740-021308
973152A00062
REV 01
740-021308
973152A00027
BUILTIN
BUILTIN
REV 01
740-021308
973152A00065
REV 01
740-021308
973152A00069
REV 01
740-021308
973152A00026
REV 01
740-021308
973152A00003
BUILTIN
BUILTIN
REV 01
740-021308
973152A00035
CFP-100G-SR10
MPCE Type 3D
HMPC PMB 2G
1X100GE CFP
1X100GE CFP
CFP-100G-LR4
1X100GE CFP
1X100GE CFP
CFP-100G-LR4
MPC Type 4-1
HMPC PMB 2G
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
505
PTX Series Packet Transport Switch Software Documentation
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
FPC 4
CPU
MIC 0
PIC 0
Xcvr
Xcvr
MIC 1
PIC 2
Xcvr
Xcvr
FPC 5
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
FPC 6
CPU
PIC 0
Xcvr 0
Xcvr 1
506
REV 01
REV 01
REV 01
REV
REV
REV
REV
REV
REV
REV
0
1
REV
REV
REV
0
1
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV 01
REV
REV
REV
REV
REV
REV
REV
REV
740-021308
973152A00004
740-021308
973152A00049
740-021308
973152A00055
BUILTIN
BUILTIN
01
740-021308
973152A00010
01
740-021308
973152A00001
01
740-021308
973152A00073
01
740-021308
973152A00012
21
750-033205
ZG5028
05
711-035209
YX3911
03
750-036233
ZL2036
BUILTIN
BUILTIN
01
740-032986
QB220708
01
740-032986
QB220735
03
750-036233
ZL2028
BUILTIN
BUILTIN
01
740-032986
QB220727
01
740-032986
QB220715
11
750-037358
CAAE2196
08
711-035209
CAAD9074
BUILTIN
BUILTIN
01
740-031980
AMA062S
01
740-031980
AMA062P
01
740-031980
AMA052R
01
740-031980
AMA0632
01
740-031980
193363A00564
01
740-031980
193363A00229
01
740-031980
193363A00363
01
740-031980
193363A00278
BUILTIN
BUILTIN
01
740-031980
AMA04CC
01
740-021308
AD0927A001W
01
740-031980
AMA04N2
01
740-031980
AMA062U
01
740-031980
193363A00491
01
740-031980
183363A01511
01
740-031980
193363A00565
01
740-031980
193363A00405
BUILTIN
BUILTIN
01
740-031980
AMA07QX
01
740-031980
AMA06MS
01
740-031980
193363A00318
01
740-031980
193363A00402
01
740-031980
193363A00174
01
740-031980
193363A00388
01
740-031980
193363A00377
01
740-031980
193363A00234
BUILTIN
BUILTIN
01
740-031980
AMA062T
01
740-031980
193363A00550
01
740-031980
193363A00364
740-031980
AMA0630
01
740-031980
193363A00509
01
740-031980
193363A00459
01
740-031980
113363A00191
01
740-031980
193363A00352
33
750-028467
CAAF5552
11
711-029089
CAAH7601
BUILTIN
BUILTIN
01
740-021308
AD0927A0036
01
740-021308
AD0927A003M
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPCE Type 3D
HMPC PMB 2G
2X40GE QSFP
2X40GE QSFP
QSFP+-40G-SR4
QSFP+-40G-SR4
2X40GE QSFP
2X40GE QSFP
QSFP+-40G-SR4
QSFP+-40G-SR4
MPC Type 4-1
HMPC PMB 2G
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr 2
Xcvr 3
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
FPC 7
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 1
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
PIC 3
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
Xcvr 4
Xcvr 5
Xcvr 6
Xcvr 7
FPC 8
CPU
MIC 0
PIC 0
Xcvr 0
Xcvr 1
Copyright © 2013, Juniper Networks, Inc.
REV 01
REV 01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
REV
REV
01
01
01
01
16
08
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
01
01
01
01
03
08
03
REV 01
REV 01
740-021308
AD0927A003G
740-021308
AD0927A0031
BUILTIN
BUILTIN
740-031980
193363A00331
740-031980
193363A00325
740-031980
193363A00417
740-031980
183363A02509
BUILTIN
BUILTIN
740-021308
T09K75140
740-031980
B11A04356
740-031980
B11K01952
740-031980
B11K01914
BUILTIN
BUILTIN
740-021308
T09K75157
740-021308
T09K75194
740-031980
B11K01926
740-031980
B11K01936
750-037358
CAAL1012
711-035209
CAAJ3851
BUILTIN
BUILTIN
740-031980
AMA04NK
740-031980
B11F00260
740-031980
B11E02192
740-031980
AMA04CP
740-031980
AJ40JKK
740-031980
B11F00238
740-031980
B10M00275
740-031980
193363A00211
BUILTIN
BUILTIN
740-031980
B11D05577
740-031980
B11G00586
740-031980
AMA08B7
740-031980
AMA04Q0
740-031980
B11D05840
740-031980
B11E00467
740-031980
B11E00029
740-021308
19T511101712
BUILTIN
BUILTIN
740-031980
193363A00568
740-031980
B10M00166
740-031980
B10M00212
740-031980
B11D05823
740-021308
03DZ06A01005
740-021308
03DZ06A01003
740-021308
03DZ06A01009
740-021308
03DZ06A01004
BUILTIN
BUILTIN
740-021308
03DZ06A01017
740-021308
03DZ06A01016
740-021308
03DZ06A01024
740-021308
03DZ06A01008
740-030658
AD0946A02UH
740-021308
T09J67913
740-021308
AD0837ES09G
740-021308
03DZ06A01015
750-045372
CAAD3111
711-035209
CAAD8033
750-036233
ZL2032
BUILTIN
BUILTIN
740-032986
QB230273
740-032986
QB230254
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC Type 4-1
HMPC PMB 2G
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
8X10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-USR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPCE Type 3D
HMPC PMB 2G
2X40GE QSFP
2X40GE QSFP
QSFP+-40G-SR4
QSFP+-40G-SR4
507
PTX Series Packet Transport Switch Software Documentation
MIC 1
PIC 2
Xcvr 0
Xcvr 1
FPC 9
CPU
PIC 0
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 1
PIC 2
Xcvr 0
Xcvr 1
Xcvr 2
Xcvr 3
PIC 3
ADC 0
ADC 1
ADC 2
ADC 3
ADC 4
ADC 5
ADC 6
ADC 7
ADC 8
ADC 9
Fan Tray 0
Fan Tray 1
Fan Tray 2
Fan Tray 3
REV 03
REV
REV
REV
REV
01
01
09
08
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
01
01
01
01
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
13
13
13
13
13
13
13
13
13
07
03
2A
2A
2A
750-036233
BUILTIN
740-032986
740-032986
750-037355
711-035209
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
760-046960
760-046960
760-046960
760-046960
ZL2021
BUILTIN
QB390962
QB390960
CAAF1531
CAAB9927
BUILTIN
193363A00525
193363A00504
193363A00368
AJ40JSS
BUILTIN
BUILTIN
123363A00042
B10M00023
AJ802EM
B11E02348
BUILTIN
ABBX5532
ABBX5550
ABBX5571
ABBX5568
ABBX5556
ABBX5553
ABBX5541
ABBX5578
ABBX5560
ABBV7188
ACAY0127
ACAY0068
ACAY0072
ACAY0070
2X40GE QSFP
2X40GE QSFP
QSFP+-40G-SR4
QSFP+-40G-SR4
MPC Type 4-2
HMPC PMB 2G
4x10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
1X100GE CFP
4x10GE SFPP
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
1X100GE CFP
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
Adapter Card
172mm FanTray
172mm FanTray
172mm FanTray
172mm FanTray
-
6
6
6
6
Fans
Fans
Fans
Fans
show chassis hardware extensive (MX2010 Router)
user@host > show chassis hardware extensive
Hardware inventory:
Item
Version Part number Serial number
Description
Chassis
JN11E233DAFK
MX2010
Jedec Code:
0x7fb0
EEPROM Version:
0x02
S/N:
JN11E233DAFK
Assembly ID: 0x0557
Assembly Version: 00.00
Date:
00-00-0000
Assembly Flags:
0x00
ID: MX2010
Board Information Record:
Address 0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I2C Hex Data:
Address 0x00: 7f b0 02 ff 05 57 00 00 00 00 00 00 00 00 00 00
Address 0x10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x20: 4a 4e 31 31 45 32 33 33 44 41 46 4b 00 00 00 00
Address 0x30: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Midplane
REV 26
750-044636
ABAB9357
Lower Backplane
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
750-044636
S/N:
S/N ABAB9357
Assembly ID: 0x0b66
Assembly Version: 01.26
Date:
08-28-2012
Assembly Flags:
0x00
Version:
REV 26
CLEI Code:
PROTOXCLEI
508
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
ID: Lower Backplane
FRU Model Number: PROTO-ASSEMBLY
Board Information Record:
Address 0x00: ad 01 08 00 2c 21 72 70 a0 00 ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 66 01 1a 52 45 56 20 32 36 00 00
Address 0x10: 00 00 00 00 37 35 30 2d 30 34 34 36 33 36 00 00
Address 0x20: 53 2f 4e 20 41 42 41 42 39 33 35 37 00 1c 08 07
Address 0x30: dc ff ff ff ad 01 08 00 2c 21 72 70 a0 00 ff ff
Address 0x40: ff ff ff ff 01 50 52 4f 54 4f 58 43 4c 45 49 50
Address 0x50: 52 4f 54 4f 2d 41 53 53 45 4d 42 4c 59 00 00 00
Address 0x60: 00 00 00 00 00 00 41 30 30 ff ff ff ff ff ff ff
Address 0x70: ff ff ff c2 ff ff ff ff ff ff ff ff ff ff ff ff
Midplane 1
REV 01
711-044557
ABAB8643
Upper Backplane
Jedec Code:
0x7fb0
EEPROM Version:
0x01
P/N:
711-044557
S/N:
S/N ABAB8643
Assembly ID: 0x0b65
Assembly Version: 01.01
Date:
07-27-2012
Assembly Flags:
0x00
Version:
REV 01
ID: Upper Backplane
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 01 ff 0b 65 01 01 52 45 56 20 30 31 00 00
Address 0x10: 00 00 00 00 37 31 31 2d 30 34 34 35 35 37 00 00
Address 0x20: 53 2f 4e 20 41 42 41 42 38 36 34 33 00 1b 07 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 00 ff ff ff ff ff ff ff ff ff ff ff
Address 0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
PMP
REV 04
711-032426
ACAJ1677
Power Midplane
Jedec Code:
0x7fb0
EEPROM Version:
0x01
P/N:
711-032426
S/N:
S/N ACAJ1677
Assembly ID: 0x045d
Assembly Version: 01.04
Date:
07-20-2012
Assembly Flags:
0x00
Version:
REV 04
ID: Power Midplane
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 01 ff 04 5d 01 04 52 45 56 20 30 34 00 00
Address 0x10: 00 00 00 00 37 31 31 2d 30 33 32 34 32 36 00 00
Address 0x20: 53 2f 4e 20 41 43 41 4a 31 36 37 37 00 14 07 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 00 ff ff ff ff ff ff ff ff ff ff ff
Address 0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
FPM Board
REV 08
760-044634
ABBV9726
Front Panel Display
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
760-044634
S/N:
S/N ABBV9726
Assembly ID: 0x0b64
Assembly Version: 01.08
Date:
09-10-2012
Assembly Flags:
0x00
Version:
REV 08
CLEI Code:
IPMYA4EJRA
ID: Front Panel Display
FRU Model Number: MX2010-CRAFT-S
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 64 01 08 52 45 56 20 30 38 00 00
Address 0x10: 00 00 00 00 37 36 30 2d 30 34 34 36 33 34 00 00
Address 0x20: 53 2f 4e 20 41 42 42 56 39 37 32 36 00 0a 09 07
Copyright © 2013, Juniper Networks, Inc.
509
PTX Series Packet Transport Switch Software Documentation
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 49 50 4d 59 41 34 45 4a 52 41 4d
Address 0x50: 58 32 30 31 30 2d 43 52 41 46 54 2d 53 00 00 00
Address 0x60: 00 00 00 00 00 00 41 00 00 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 93 ff ff ff ff ff ff ff ff ff ff ff ff
PSM 0
REV 01
740-045050
1E02224000P
DC 52V Power Supply
Module
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
740-045050
S/N:
1E02224000P
Assembly ID: 0x0478
Assembly Version: 01.01
Date:
12-06-2012
Assembly Flags:
0x00
Version:
REV 01
CLEI Code:
XXXXXXXXXX
ID: DC 52V Power Supply Module FRU Model Number: MX2000-PSM-HC-DC-S-A
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 04 78 01 01 52 45 56 20 30 31 00 00
Address 0x10: 00 00 00 00 37 34 30 2d 30 34 35 30 35 30 00 00
Address 0x20: 31 45 30 32 32 32 34 30 30 30 50 00 00 06 0c 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 58 58 58 58 58 58 58 58 58 58 4d
Address 0x50: 58 32 30 30 30 2d 50 53 4d 2d 48 43 2d 44 43 2d
Address 0x60: 53 2d 41 00 00 00 31 30 31 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 4a 00 00 00 00 00 00 00 00 00 00 00 00
PSM 1
REV 01
740-045050
1E02224000M
DC 52V Power Supply
Module
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
740-045050
S/N:
1E02224000M
Assembly ID: 0x0478
Assembly Version: 01.01
Date:
12-06-2012
Assembly Flags:
0x00
Version:
REV 01
CLEI Code:
XXXXXXXXXX
ID: DC 52V Power Supply Module FRU Model Number: MX2000-PSM-HC-DC-S-A
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 04 78 01 01 52 45 56 20 30 31 00 00
Address 0x10: 00 00 00 00 37 34 30 2d 30 34 35 30 35 30 00 00
Address 0x20: 31 45 30 32 32 32 34 30 30 30 4d 00 00 06 0c 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 58 58 58 58 58 58 58 58 58 58 4d
Address 0x50: 58 32 30 30 30 2d 50 53 4d 2d 48 43 2d 44 43 2d
Address 0x60: 53 2d 41 00 00 00 31 30 31 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 4a 00 00 00 00 00 00 00 00 00 00 00 00
...
PDM 0
REV 01
740-045234
1E262250067
DC Power Dist Module
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
740-045234
S/N:
1E262250067
Assembly ID: 0x047b
Assembly Version: 01.01
Date:
06-28-2012
Assembly Flags:
0x00
Version:
REV 01
CLEI Code:
IPUPAJSKAA
ID: DC Power Dist Module
FRU Model Number: MX2000-PDM-DC-S-A
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 04 7b 01 01 52 45 56 20 30 31 00 00
Address 0x10: 00 00 00 00 37 34 30 2d 30 34 35 32 33 34 00 00
Address 0x20: 31 45 32 36 32 32 35 30 30 36 37 00 00 1c 06 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 49 50 55 50 41 4a 53 4b 41 41 4d
Address 0x50: 58 32 30 30 30 2d 50 44 4d 2d 44 43 2d 53 2d 41
Address 0x60: 00 00 00 00 00 00 31 30 31 ff ff ff ff ff ff ff
510
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Address 0x70: ff ff ff 89 00 00 00 00 00 00 00 00 00 00 00 00
Routing Engine 0 REV 02
740-041821
9009099704
RE-S-1800x4
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
740-041821
S/N:
9009099704
Assembly ID: 0x09c0
Assembly Version: 01.02
Date:
03-15-2012
Assembly Flags:
0x00
Version:
REV 02
ID: RE-S-1800x4
FRU Model Number: RE-S-1800X4-16G-S
Board Information Record:
Address 0x00: 54 32 30 32 37 44 41 2d 34 34 47 42 23 41 23 00
I2C Hex Data:
Address 0x00: 7f b0 02 ff 09 c0 01 02 52 45 56 20 30 32 00 00
Address 0x10: 00 00 00 00 37 34 30 2d 30 34 31 38 32 31 00 00
Address 0x20: 39 30 30 39 30 39 39 37 30 34 00 00 00 0f 03 07
Address 0x30: dc ff ff ff 54 32 30 32 37 44 41 2d 34 34 47 42
Address 0x40: 23 41 23 00 01 00 00 00 00 00 00 00 00 00 00 52
Address 0x50: 45 2d 53 2d 31 38 30 30 58 34 2d 31 36 47 2d 53
Address 0x60: 00 00 00 00 00 00 41 30 30 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 8c ff ff ff ff ff ff ff ff ff ff ff ff
ad0
3831 MB UGB30SFA4000T1
SFA4000T1 00000651 Compact Flash
ad1
30533 MB UGB94BPH32H0S1-KCI
11000019592
Disk 1
usb0 (addr 1) EHCI root hub 0
Intel
uhub0
usb0 (addr 2) product 0x0020 32
vendor 0x8087
uhub1
DIMM 0
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
DIMM 1
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
DIMM 2
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
DIMM 3
SGU04G72H1BD2SA-BB DIE REV-52 PCB REV-54 MFR ID-ce80
Routing Engine 1 REV 02
740-041821
9009099706
RE-S-1800x4
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
740-041821
S/N:
9009099706
Assembly ID: 0x09c0
Assembly Version: 01.02
Date:
02-23-2012
Assembly Flags:
0x00
Version:
REV 02
ID: RE-S-1800x4
FRU Model Number: RE-S-1800X4-16G-S
Board Information Record:
Address 0x00: 54 32 30 32 37 44 41 2d 34 34 47 42 23 41 23 00
I2C Hex Data:
Address 0x00: 7f b0 02 ff 09 c0 01 02 52 45 56 20 30 32 00 00
Address 0x10: 00 00 00 00 37 34 30 2d 30 34 31 38 32 31 00 00
Address 0x20: 39 30 30 39 30 39 39 37 30 36 00 00 00 17 02 07
Address 0x30: dc ff ff ff 54 32 30 32 37 44 41 2d 34 34 47 42
Address 0x40: 23 41 23 00 01 00 00 00 00 00 00 00 00 00 00 52
Address 0x50: 45 2d 53 2d 31 38 30 30 58 34 2d 31 36 47 2d 53
Address 0x60: 00 00 00 00 00 00 41 30 30 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 8c ff ff ff ff ff ff ff ff ff ff ff ff
ad0
3998 MB Virtium - TuffDrive VCF P1T0200262860208 114 Compact Flash
ad1
30533 MB UGB94ARF32H0S3-KC
UNIGEN-499551-000404 Disk 1
CB 0
REV 13
750-040257
CAAF8436
Control Board
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
750-040257
S/N:
S/N CAAF8436
Assembly ID: 0x0b26
Assembly Version: 01.13
Date:
08-29-2012
Assembly Flags:
0x00
Version:
REV 13
CLEI Code:
PROTOXCLEI
ID: Control Board
FRU Model Number: PROTO-ASSEMBLY
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 26 01 0d 52 45 56 20 31 33 00 00
Address 0x10: 00 00 00 00 37 35 30 2d 30 34 30 32 35 37 00 00
Address 0x20: 53 2f 4e 20 43 41 41 46 38 34 33 36 00 1d 08 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Copyright © 2013, Juniper Networks, Inc.
511
PTX Series Packet Transport Switch Software Documentation
Address 0x40: ff ff ff ff 01 50 52 4f 54 4f 58 43
Address 0x50: 52 4f 54 4f 2d 41 53 53 45 4d 42 4c
Address 0x60: 00 00 00 00 00 00 41 30 30 ff ff ff
Address 0x70: ff ff ff c2 ff ff ff ff ff ff ff ff
...
SPMB 0
REV 02
711-041855
ABBV3825
Jedec Code:
0x7fb0
EEPROM Version:
P/N:
711-041855
S/N:
Assembly ID: 0x0b29
Assembly Version:
Date:
08-14-2012
Assembly Flags:
Version:
REV 02
ID: PMB Board
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 01 ff 0b 29 01 02 52 45 56 20
Address 0x10: 00 00 00 00 37 31 31 2d 30 34 31 38
Address 0x20: 53 2f 4e 20 41 42 42 56 33 38 32 35
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 00 ff ff ff ff ff ff ff
Address 0x50: ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x60: ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x70: ff ff ff ff 00 00 00 00 00 00 00 00
...
SFB 0
REV 05
711-044466
ABBX5682
Jedec Code:
0x7fb0
EEPROM Version:
P/N:
711-044466
S/N:
Assembly ID: 0x0b25
Assembly Version:
Date:
09-07-2012
Assembly Flags:
Version:
REV 05
CLEI Code:
ID: Switch Fabric Board
FRU Model Number:
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 25 01 05 52 45 56 20
Address 0x10: 00 00 00 00 37 31 31 2d 30 34 34 34
Address 0x20: 53 2f 4e 20 41 42 42 58 35 36 38 32
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 50 52 4f 54 4f 58 43
Address 0x50: 52 4f 54 4f 2d 41 53 53 45 4d 42 4c
Address 0x60: 00 00 00 00 00 00 41 30 30 ff ff ff
Address 0x70: ff ff ff c2 00 00 00 01 00 00 00 00
...
FPC 0
REV 09
750-037355
CAAF0924
Jedec Code:
0x7fb0
EEPROM Version:
P/N:
750-037355
S/N:
Assembly ID: 0x0b4e
Assembly Version:
Date:
05-21-2012
Assembly Flags:
Version:
REV 09
CLEI Code:
ID: MPC Type 4-2
FRU Model Number:
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 4e 01 09 52 45 56 20
Address 0x10: 00 00 00 00 37 35 30 2d 30 33 37 33
Address 0x20: 53 2f 4e 20 43 41 41 46 30 39 32 34
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 50 52 4f 54 4f 58 43
Address 0x50: 50 43 34 45 2d 32 43 47 45 2d 38 58
Address 0x60: 00 00 00 00 00 00 30 39 00 ff ff ff
Address 0x70: ff ff ff c6 ff ff ff ff ff ff ff ff
512
4c
59
ff
ff
45
00
ff
ff
49
00
ff
ff
50
00
ff
ff
PMB Board
0x01
S/N ABBV3825
01.02
0x00
ff ff ff ff
30
35
00
ff
ff
ff
ff
00
32
35
0e
ff
ff
ff
ff
00
00
00
08
ff
ff
ff
ff
00
00
00
07
ff
ff
ff
ff
00
Switch Fabric Board
0x02
S/N ABBX5682
01.05
0x00
PROTOXCLEI
PROTO-ASSEMBLY
ff ff ff ff
30
36
00
ff
4c
59
ff
00
35
36
07
ff
45
00
ff
00
00
00
09
ff
49
00
ff
48
00
00
07
ff
50
00
ff
00
MPC Type 4-2
0x02
S/N CAAF0924
01.09
0x00
PROTOXCLEI
MPC4E-2CGE-8XGE
ff ff ff ff
30
35
00
ff
4c
47
ff
ff
39
35
15
ff
45
45
ff
ff
00
00
05
ff
49
00
ff
ff
00
00
07
ff
4d
00
ff
ff
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
CPU
REV 08
711-035209
CAAB9842
HMPC PMB 2G
Jedec Code:
0x7fb0
EEPROM Version:
0x01
P/N:
711-035209
S/N:
S/N CAAB9842
Assembly ID: 0x0b04
Assembly Version: 01.08
Date:
05-17-2012
Assembly Flags:
0x00
Version:
REV 08
ID: HMPC PMB 2G
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 01 ff 0b 04 01 08 52 45 56 20 30 38 00 00
Address 0x10: 00 00 00 00 37 31 31 2d 30 33 35 32 30 39 00 00
Address 0x20: 53 2f 4e 20 43 41 41 42 39 38 34 32 00 11 05 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 00 ff ff ff ff ff ff ff ff ff ff ff
Address 0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x70: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
PIC 0
BUILTIN
BUILTIN
4x10GE SFPP
Jedec Code:
0x0000
EEPROM Version:
0x00
P/N:
BUILTIN
S/N:
BUILTIN
Assembly ID: 0x0a53
Assembly Version: 00.00
Date:
00-00-0000
Assembly Flags:
0x00
ID: 4x10GE SFPP
Board Information Record:
Address 0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I2C Hex Data:
Address 0x00: 00 00 00 00 0a 53 00 00 00 00 00 00 00 00 00 00
Address 0x10: 00 00 00 00 42 55 49 4c 54 49 4e 00 4d 58 43 00
Address 0x20: 42 55 49 4c 54 49 4e 00 4d 58 43 00 00 00 00 00
Address 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Address 0x70: 00 00 00 00 c0 02 ae 64 00 00 00 00 0a 52 00 00
Xcvr 0
REV 01
740-021308
19T511101656
SFP+-10G-SR
Xcvr 1
REV 01
740-031980
AMA04RU
SFP+-10G-SR
Xcvr 2
REV 01
740-031980
193363A00558
SFP+-10G-SR
Xcvr 3
REV 01
740-031980
B10M00202
SFP+-10G-SR
...
ADC 0
REV 13
750-043596
ABBX5532
Adapter Card
Jedec Code:
0x7fb0
EEPROM Version:
0x02
P/N:
750-043596
S/N:
S/N ABBX5532
Assembly ID: 0x0b3d
Assembly Version: 01.13
Date:
09-12-2012
Assembly Flags:
0x00
Version:
REV 13
CLEI Code:
IPUCBA8CAA
ID: Adapter Card
FRU Model Number: MX2000-LC-ADAPTER
Board Information Record:
Address 0x00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
I2C Hex Data:
Address 0x00: 7f b0 02 ff 0b 3d 01 0d 52 45 56 20 31 33 00 00
Address 0x10: 00 00 00 00 37 35 30 2d 30 34 33 35 39 36 00 00
Address 0x20: 53 2f 4e 20 41 42 42 58 35 35 33 32 00 0c 09 07
Address 0x30: dc ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Address 0x40: ff ff ff ff 01 49 50 55 43 42 41 38 43 41 41 4d
Address 0x50: 58 32 30 30 30 2d 4c 43 2d 41 44 41 50 54 45 52
Address 0x60: 00 00 00 00 00 00 41 00 00 ff ff ff ff ff ff ff
Address 0x70: ff ff ff 3a 00 00 00 00 00 00 00 00 00 00 00 00
...
Copyright © 2013, Juniper Networks, Inc.
513
PTX Series Packet Transport Switch Software Documentation
show chassis hardware models (MX2010 Router)
user@host > show chassis hardware models
Hardware inventory:
Item
Version Part number
FPM Board
REV 06
711-032349
PSM 4
REV 0C
740-033727
PSM 5
REV 0B
740-033727
PSM 6
REV 0B
740-033727
PSM 7
REV 0C
740-033727
PSM 8
REV 0C
740-033727
PDM 0
REV 0B
740-038109
PDM 1
REV 0B
740-038109
Routing Engine 0 REV 02
740-041821
Routing Engine 1 REV 02
740-041821
CB 0
REV 08
750-040257
CB 1
REV 08
750-040257
SFB 0
REV 06
711-032385
SFB 1
REV 07
711-032385
SFB 2
REV 07
711-032385
SFB 3
REV 07
711-032385
SFB 4
REV 07
711-032385
SFB 5
REV 07
711-032385
SFB 6
REV 07
711-032385
SFB 7
REV 07
711-032385
FPC 0
REV 33
750-028467
FPC 1
REV 21
750-033205
MIC 0
REV 03
750-033307
MIC 1
REV 03
750-033307
FPC 8
REV 22
750-031089
MIC 0
REV 26
750-028392
MIC 1
REV 26
750-028387
FPC 9
REV 11
750-036284
ADC 0
REV 05
750-043596
ADC 1
REV 01
750-043596
ADC 8
REV 01
750-043596
ADC 9
REV 02
750-043596
Fan Tray 0
REV 2A
760-046960
Fan Tray 1
REV 2A
760-046960
Fan Tray 2
REV 2A
760-046960
Fan Tray 3
REV 2A
760-046960
Serial number
ZX8744
VK00254
VG00015
VH00097
VJ00151
VJ00149
WA00008
WA00014
9009094134
9009094141
CAAB3491
CAAB3489
ZV1828
ZZ2568
ZZ2563
ZZ2564
ZZ2580
ZZ2579
CAAB4882
CAAB4898
CAAB1919
ZG5027
ZV6299
ZV6268
ZT9746
ABBS1150
ABBR9582
ZL3591
CAAC2073
ZV4117
ZV4107
ZW1555
ACAY0015
ACAY0019
ACAY0020
ACAY0021
FRU model number
711-032349
00000000000000000000000
00000000000000000000000
00000000000000000000000
00000000000000000000000
00000000000000000000000
RE-S-1800X4-16G-S
RE-S-1800X4-16G-S
750-040257
750-040257
711-032385
711-032385
711-032385
711-032385
711-032385
711-0323856
711-044170
711-044170
MPC-3D-16XGE-SFPP
MX-MPC3-3D
MIC3-3D-10XGE-SFPP
MIC3-3D-10XGE-SFPP
MX-MPC2-3D
MIC-3D-20GE-SFP
MIC-3D-4XGE-XFP
MPCE-3D-16XGE-SFPP
750-043596
750-043596
750-043596
750-043596
show chassis hardware clei-models (MX2010 Routers)
user@host > show chassis hardware clei-models
Hardware inventory:
Item
Version Part number CLEI code
FPM Board
REV 06
711-032349
PROTOXCLEI
PSM 4
REV 0C
740-033727
0000000000
PSM 5
REV 0B
740-033727
0000000000
PSM 6
REV 0B
740-033727
0000000000
PSM 7
REV 0C
740-033727
0000000000
PSM 8
REV 0C
740-033727
0000000000
PDM 0
REV 0B
740-038109
PDM 1
REV 0B
740-038109
Routing Engine 0 REV 02
740-041821
Routing Engine 1 REV 02
740-041821
CB 0
REV 08
750-040257
PROTOXCLEI
CB 1
REV 08
750-040257
PROTOXCLEI
SFB 0
REV 06
711-032385
PROTOXCLEI
SFB 1
REV 07
711-032385
PROTOXCLEI
514
FRU model number
711-032349
00000000000000000000000
00000000000000000000000
00000000000000000000000
00000000000000000000000
00000000000000000000000
RE-S-1800X4-16G-S
RE-S-1800X4-16G-S
750-040257
750-040257
711-032385
711-032385
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
SFB 2
SFB 3
SFB 4
SFB 5
SFB 6
SFB 7
FPC 0
FPC 1
MIC 0
MIC 1
FPC 8
MIC 0
MIC 1
FPC 9
ADC 0
ADC 1
ADC 8
ADC 9
Fan Tray
Fan Tray
Fan Tray
Fan Tray
0
1
2
3
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
07
07
07
07
07
07
33
21
03
03
22
26
26
11
05
01
01
02
2A
2A
2A
2A
711-032385
711-032385
711-032385
711-032385
711-032385
711-032385
750-028467
750-033205
750-033307
750-033307
750-031089
750-028392
750-028387
750-036284
750-043596
750-043596
750-043596
750-043596
760-046960
760-046960
760-046960
760-046960
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
COUIBAYBAA
COUIA15BAA
COUIA16BAA
CMUIACGBAA
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
PROTOXCLEI
711-032385
711-032385
711-032385
711-0323856
711-044170
711-044170
MPC-3D-16XGE-SFPP
MX-MPC3-3D
MIC3-3D-10XGE-SFPP
MIC3-3D-10XGE-SFPP
MX-MPC2-3D
MIC-3D-20GE-SFP
MIC-3D-4XGE-XFP
MPCE-3D-16XGE-SFPP
750-043596
750-043596
750-043596
750-043596
Serial number
JN11E2227AFJ
ABAB9384
ABAB9386
ACAJ1579
ACAJ1524
ABBT8837
1E022240056
Description
MX2020
Lower Power Midplane
Upper Backplane
Upper Power Midplane
Lower Power Midplane
Front Panel Display
DC 52V Power Supply
1E022240054
DC 52V Power Supply
1E02224005H
DC 52V Power Supply
1E022240053
DC 52V Power Supply
1E02224004K
DC 52V Power Supply
1E02224006W
DC 52V Power Supply
1E022240062
DC 52V Power Supply
1E02224005B
DC 52V Power Supply
1E02224005A
DC 52V Power Supply
1E022240052
DC 52V Power Supply
1E022240051
DC 52V Power Supply
1E022240058
DC 52V Power Supply
1E02224004L
DC 52V Power Supply
1E02224005M
DC 52V Power Supply
show chassis hardware (MX2020 Router)
user@host > show chassis hardware
Hardware inventory:
Item
Version Part number
Chassis
Midplane
REV 27
750-040240
Midplane 1
REV 04
711-032386
PMP 1
REV 05
711-032428
PMP 0
REV 04
711-032426
FPM Board
REV 06
760-040242
PSM 0
REV 01
740-045050
Module
PSM 1
REV 01
740-045050
Module
PSM 2
REV 01
740-045050
Module
PSM 3
REV 01
740-045050
Module
PSM 4
REV 01
740-045050
Module
PSM 7
REV 01
740-045050
Module
PSM 8
REV 01
740-045050
Module
PSM 9
REV 01
740-045050
Module
PSM 10
REV 01
740-045050
Module
PSM 11
REV 01
740-045050
Module
PSM 12
REV 01
740-045050
Module
PSM 13
REV 01
740-045050
Module
PSM 14
REV 01
740-045050
Module
PSM 15
REV 01
740-045050
Copyright © 2013, Juniper Networks, Inc.
515
PTX Series Packet Transport Switch Software Documentation
Module
PSM 16
REV 01
Module
PSM 17
REV 01
Module
PDM 0
REV 01
PDM 1
REV 01
PDM 2
REV 01
PDM 3
REV 01
Routing Engine 0 REV 02
Routing Engine 1 REV 02
CB 0
REV 14
CB 1
REV 08
SPMB 0
REV 01
SPMB 1
REV 02
SFB 0
REV 03
SFB 1
REV 05
SFB 2
REV 05
SFB 3
REV 05
SFB 4
REV 05
SFB 5
REV 05
SFB 6
REV 03
SFB 7
REV 05
FPC 0
REV 30
CPU
REV 10
PIC 0
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 1
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 2
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 3
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
FPC 1
REV 30
CPU
REV 10
PIC 0
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 1
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
Xcvr 3
REV 01
PIC 2
Xcvr 0
REV 01
Xcvr 1
REV 01
Xcvr 2
REV 01
516
740-045050
1E02224006S
DC 52V Power Supply
740-045050
1E02224005Z
DC 52V Power Supply
740-045234
740-045234
740-045234
740-045234
740-041821
740-041821
750-040257
750-040257
711-041855
711-041855
711-044466
711-044466
711-044466
711-044466
711-044466
711-044466
711-044466
711-044466
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
1E012150033
1E012150027
1E012150028
1E012150045
9009089704
9009094138
CAAF8430
CAAB3482
ZS2290
CAAA6141
ABBV6789
ABBX5666
ABBX5678
ABBX5687
ABBX5609
ABBX5675
ABBV6805
ABBX5701
ABBN0284
ABBN0507
BUILTIN
B11E00990
B11E04357
B11F01327
B11E04375
BUILTIN
B11E02760
B11E02904
B11E03963
B11E00756
BUILTIN
B11E04418
B11E01077
B11E01128
B11F01253
BUILTIN
B11E01140
B11F01626
B11E01075
B11E01177
ABBN0208
ABBJ1084
BUILTIN
B11E04745
B11F01570
B11E04388
B11F01439
BUILTIN
B11E04739
B11F01869
B11F01675
B11F01901
BUILTIN
B11F01346
B11F01288
B11F01824
DC Power Dist Module
DC Power Dist Module
DC Power Dist Module
DC Power Dist Module
RE-S-1800x4
RE-S-1800x4
Control Board
Control Board
PMB Board
PMB Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
Switch Fabric Board
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 2
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 3
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 4
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Copyright © 2013, Juniper Networks, Inc.
3
REV 01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
REV 01
REV 01
REV 01
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-031980
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
B11E04312
BUILTIN
B11E02811
B11E03847
B11F01495
B11F01265
ZM5111
ZP6607
BUILTIN
AK80LJA
AK80MFZ
AK80NKL
AK80KF4
BUILTIN
AK80FBJ
AK80MM2
AK80LJV
AK80NXV
BUILTIN
AK80N1H
AK80NLS
AK80FL5
AK80NL9
BUILTIN
AK80NG2
AK80KDU
AK80MG1
AK80MM0
ABBN0302
ABBN0495
BUILTIN
B11F01581
B11E01176
B11F01251
B11E02752
BUILTIN
B11E00786
B11E01020
B11E01023
B11E02819
BUILTIN
B11E02812
B11D04437
B11F01279
B11F01333
BUILTIN
B11E00978
B11E01018
B11F01784
AK80NKP
ABBN0308
ABBJ1095
BUILTIN
B11E04305
B11E01147
B11E01195
B11F01743
BUILTIN
B11F01892
B11E02880
B11E00725
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
517
PTX Series Packet Transport Switch Software Documentation
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 5
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 6
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 7
CPU
PIC 0
Xcvr
Xcvr
Xcvr
518
3
REV 01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
REV 01
REV 01
REV 01
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
B11E01057
BUILTIN
B11E02816
B11C04501
B11E02764
B11E00789
BUILTIN
B11F01250
B11E02847
B11E00787
B11E03803
ABBN0316
ABBJ1082
BUILTIN
B11K00523
B11K01848
B11K01865
B11K00540
BUILTIN
B11K00422
B11K00428
B11K00423
B11K01855
BUILTIN
B11K01847
B11K00526
B11K00529
B11K00525
BUILTIN
B11K00425
B11K00530
B11K01851
B11K00528
ABBN6832
ABBK6534
BUILTIN
AK80MB4
AK80FQ6
AK80N1F
AK80NLQ
BUILTIN
AK80KDR
AK80FGJ
AK80N5G
AK80KD8
BUILTIN
AK80LET
AK80N1X
AK80NRF
AK80NL2
BUILTIN
AK80N3D
AK80MRB
AK80LEQ
AK80LER
ABBN6811
ABBN7288
BUILTIN
AK80NK8
AK80LJG
AK80LBU
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 8
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 9
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 10
Copyright © 2013, Juniper Networks, Inc.
3
REV 01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
23
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
01
01
01
01
32
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-021308
740-031980
740-021308
740-021308
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
AK80N21
BUILTIN
AK80LEU
AK80NLM
AK80NL6
AK80LES
BUILTIN
AK80LEN
AK80ME0
AK80LMG
AK80MM1
BUILTIN
AK80MG7
AK80KF9
AK80NRQ
AK80NLE
YN2977
YP1856
BUILTIN
183363A00875
183363A00851
183363A00772
183363A00882
BUILTIN
183363A00735
183363A00169
183363A00726
183363A00077
BUILTIN
183363A00168
183363A00676
183363A00732
183363A00091
BUILTIN
183363A00725
183363A00642
183363A00871
183363A00853
ABBN6798
ABBK6556
BUILTIN
9ZDZ06A00055
183363A00239
AD0915E003K
AD0915E003A
BUILTIN
AK80MRC
AK80NL5
AK80NKN
AK80N3U
BUILTIN
AK80N1T
AJ808DJ
AK80NG4
AK80FND
BUILTIN
AK80FKQ
AK80NLT
AK80NKR
AK80LKM
ABBN6813
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
519
PTX Series Packet Transport Switch Software Documentation
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 11
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 12
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
520
REV 10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-021308
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
ABBK6542
BUILTIN
AK80NA3
AK80NLF
AK80MRH
AK80KE4
BUILTIN
973152A00030
AK80L9H
AK80ME8
AK80NLR
BUILTIN
AK80NG1
AK80MCA
AK80LFC
AK80LEM
BUILTIN
AK80N9X
AK80LAC
AK80LF2
AK80N8T
ABBN0281
ABBN0526
BUILTIN
B11F01326
B11E03973
B11E00950
B11E00674
BUILTIN
B11E00775
B11E04461
B11E01074
B11E02821
BUILTIN
B11E04501
B11E00757
B11F01623
B11E01022
BUILTIN
B11E04359
B11E02751
B11E02736
B11E01178
ABBN6796
ABBN7259
BUILTIN
B11K01856
B11K01853
B11K01863
163363A02863
BUILTIN
163363A02668
163363A02881
163363A01671
163363A02627
BUILTIN
163363A02725
163363A02692
163363A02730
163363A03081
BUILTIN
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr
Xcvr
Xcvr
Xcvr
FPC 13
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 14
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 15
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Copyright © 2013, Juniper Networks, Inc.
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-021310
740-021310
740-021310
740-021310
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-021308
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
163363A02736
163363A02568
163363A02747
163363A02579
ABBN0270
ABBJ0966
BUILTIN
AK80NL1
AK80NXW
AK80KD2
AK80FMD
BUILTIN
AK80NKQ
AK80MGH
AK80N38
AK80NL7
BUILTIN
AK80LEL
AK80NKD
AK80KCY
AK80LHK
BUILTIN
AK80M5J
AK80MBE
AK80NLG
AK80LFH
ABBN6790
ABBK6515
BUILTIN
AK80LZM
AK80MCC
AK80KCM
AK80KE0
BUILTIN
C10F99155
C10F99049
C10F99128
C10F99169
BUILTIN
AK80LF3
163363A02597
163363A03060
163363A03057
BUILTIN
AK80LEX
AK80FEU
AK80FNM
AJQ0Q5G
ABBN6791
ABBN7289
BUILTIN
B11K00424
B11K01849
B11K01862
B11K01852
BUILTIN
B11K00427
B11K00430
B11K01854
B11K00426
BUILTIN
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-LRM
SFP+-10G-LRM
SFP+-10G-LRM
SFP+-10G-LRM
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
521
PTX Series Packet Transport Switch Software Documentation
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 16
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 17
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 18
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
522
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
30
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-030658
740-030658
740-030658
740-031980
750-028467
711-029089
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
BUILTIN
740-030658
740-030658
740-030658
740-030658
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
B11K00429
B11K01864
B11K01850
B11K00522
BUILTIN
B11E01144
B11E00985
B11E00796
B11K01866
ABBM4592
ABBN0465
BUILTIN
B11F01435
B11E01052
B11F01328
B11F01254
BUILTIN
B11E02738
B11E02881
B11F01624
B11E00889
BUILTIN
B11E02883
B11E00681
B11E04306
B11E02813
BUILTIN
B11F01801
B11E02753
B11E01156
B11E04324
ABBN6810
ABBN7237
BUILTIN
163363A02638
163363A02082
163363A01674
163363A03058
BUILTIN
163363A03048
163363A02729
163363A02566
163363A02567
BUILTIN
163363A02878
163363A02739
163363A01959
163363A02660
BUILTIN
163363A02731
163363A02588
163363A02673
163363A02654
ABBM4739
ABBN0487
BUILTIN
163363A02569
163363A02886
163363A03082
133363A00297
BUILTIN
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
4x 10GE(LAN) SFP+
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
SFP+-10G-USR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
MPC 3D 16x 10GE
AMPC PMB
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
Copyright © 2013, Juniper Networks, Inc.
Chapter 15: Monitoring Commands for PTX Series Packet Transport Switches
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
FPC 19
CPU
PIC 0
Xcvr
Xcvr
Xcvr
Xcvr
PIC 1
Xcvr
Xcvr
Xcvr
Xcvr
PIC 2
Xcvr
Xcvr
Xcvr
Xcvr
PIC 3
Xcvr
Xcvr
Xcvr
Xcvr
ADC 0
ADC 1
ADC 2
ADC 3
ADC 4
ADC 5
ADC 6
ADC 7
ADC 8
ADC 9
ADC 10
ADC 11
ADC 12
ADC 13
ADC 14
ADC 15
ADC 16
ADC 17
ADC 18
ADC 19
Fan Tray
Fan Tray
Fan Tray
Fan Tray
Copyright © 2013, Juniper Networks, Inc.
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
01
01
01
01
32
10
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
01
01
01
01
0
1
2
3
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
REV
01
01
01
01
13
13
13
13
13
13
13
07
07
07
13
13
13
13
13
13
13
13
13
11
2A
2A
2A
2A
0
1
2
3
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031981
740-031981
740-031981
740-031981
750-028467
711-029089
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
BUILTIN
740-031980
740-031980
740-031980
740-031980
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
750-043596
760-046960
760-046960
760-046960
760-046960
163363A02726
163363A03050
163363A02884
163363A03076
BUILTIN
163363A02581
163363A02873
163363A02582
163363A03083
BUILTIN
UL70BU6
UL50QC6
UL708N6
UL603KK
ABBN6827
ABBK6508
BUILTIN
163363A01688
163363A01724
163363A01773
163363A02593
BUILTIN
163363A03061
163363A03056
163363A02669
163363A03070
BUILTIN
163363A02572
163363A02697
163363A02585
163363A03052
BUILTIN
163363A02591
163363A02649
163363A02577
163363A02698
ABBX5561
ABBX5546
ABBX5535
ABBX5552
ABBX5581
ABBX5545
ABBX5554
ABBV7194
ABBV7251
ABBV7202
ABBX5538
ABBX5566
ABBX5542
ABBX5539
ABBX5555
ABBX5557
ABBX5536
ABBX5559
ABBX5537
ABBW5685
ACAY0030
ACAY0039
ACAY0033
ACAY0062
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
SFP+-10G-SR
4x 10GE(LAN) SFP+
SFP+-10G-LR
SFP+-10G-LR
SFP+-10G-LR
SFP+-10G-LR
MPC 3D 16x 10GE
AMPC P">