METER COUNTER LOCATIONS
KYOCERA/COPYSTAR
KM-2030/2530/3530/4030
CS-250ci/CS-300ci/ CS-420/520/820/ CS-3050ci/3550ci
CS-3035/4035/5035
CS-1820/1650/2050/6030/2550/CS-3225E/CS-2525E
CS-3050/4050/5050
FS-C5016N/FS-9120DN/FS-9500/FS-5015N
FS-1128MFP/ FS-1350DN/ FS-3540MFP/ FS-3640MFP/
CS-221/255/ CS-205C
KM-C830D
KM-6230/RI-4530/5530/6330
KM-3130
CS-4000
CS-550
CS-1635
2015/9927/9935/9940/9945/9965/2055/2555/2070/2570/
2535/4035/2560/2545/4045/25105 (& all newer models)
9920/9925/9955/9035/9027/9115/9450/9550/9500(all old models)
Right hand side of machine, towards the front top
Press "COUNTER" button
Touch "Print Status Page" on screen
Press "Yes" to print
Press "DEFAULT SETTING/COUNTER" (*) button
Press "COUNTER" on touch screen
System "MENU" counter
Press "COUNTER CHECK"
Scroll down, press "PRINT COUNT REPORT"
Press "COUNTER" button
On LCD press "PRINTED PAGE COUNT" or "PRINT STATUS PAGE"
Press "MENU" Also: "Menu" "Life Counters" "Printed Pages"
Scroll down to "PRINTER STATUS"
Hit "ENTER" twice
Also: "OK"
Press "SYSTEM MENU/COUNTER" button
Press "REPORT", "REPORT PRINT", "STATUS PAGE"
or- "COUNTER CHECK", "PRINT COUNT REPORT"
Right hand side of machine, towards the back
Open door, upper left corner
Press "UTILITY" button; Touch "METER COUNT" on screen
Right hand side under power button
Press "COUNTER" Button; On Touch Screen press "PRINT TOTAL"
Press & hold the "CLEAR" button
Upper left hand corner of the control panel
Press "USER TOOLS/COUNTER"
Press "COUNTER" on the LCD screen
Open front panel door and odometer is located inside
TOSHIBA
e-Studio 200L/3511/4511/281c/351c/451c/600/2500c/
3500c/3510c
e-Studio 2040/2330/2551C/2830c/3040c/3540c/4520c/5520c /
Copystar: CS-550C
e-Studio 242/306
e-Studio 16/20/25
e-Studio 120/150/161
e-Studio 210c
e-Studio 550/650/810
e-Studio 455
e-Studio 28/35/45
Misc Toshiba
Select "USER FUNCTIONS", "COUNTER", "TOTAL COUNTER"
Then "PRINT/START" - orSelect "USER FUNCTIONS", "COUNTER"
then "PRINT OUT TOTAL COUNTER"
Press "COUNTER" button
The "PRINT OUT TOTAL COUNT"
then "CLOSE"
Press "USER FUNCTION" button
On Touch Screen Press "REPORTS" or "LISTS"
Then press "FUNCTION LIST"
Then press "ENTER" to print out meter report
Program, press downward arrow until #6, "TOTAL PRINT COUNTER", set
Press and hold down "CLEAR" key for 5 sec
Will display in two sets of three
Press "PROGRAM", "TOTAL COUNTER"
May have to press "pre" or "next" to go to the right screen
Counter on the top left
White "COUNTER" button
"JOB STATUS", then "STATUS"
If the odometer is not located on the left of the control panel
then follow these instructions:
Press "JOB STATUS", then "STATUS" on the LCD screen. The meter
will appear at the bottom right hand corner of the LCD screen
">
