C2G Plug Assembly Instructions

 Co
Cat.6 Plug Assembly Instructions GET CONNECTED
Step: 1 Part 1 Part 2
*cable stripped approximately 3cm. H divider Insert
Step: 2
[BR] *Arrange 4 pairs of conductors with
H divider[part1],their positions as
shown.
*Caution:the positions of the BL and GN pairs are oppsite in two ends.
‘Step: 3
Conductors
*Untwisted and straighten the conductors which over and
above the H divider,which under the H divider are stay
twisted.
*Assure the H divider close the PVC tightly.
PIN ASSIGNMENT
[T568B]
1—-WH/OR
2—-—0R
3-—WH/GN
6———GN
4——-BL
5-—WH/BL
T-—WH/BR
8-———BR
Step: 4
*Ensure that the conductors are cut as short as possible to
keep the integrity of the twisted pairs before inserting them
into the load bar and connector.
re You ) fa et
BED
3555 Kettering Blvd. | Moraine OH | 45439 | www.c2g.com | 800.287.2843
[ TD68A]
1-—WH/GN
5——WH/BL
T——WH/BR
8—-— BR
">