advertisement
Installation Instructions for
Lil Wok
700LMPCO_
920WOKSHD
1.6
ACCES SORIES
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product must be used with Tech Lighting systems only.
Installing the Lil Wok
1A
2 1
TAB
1C
3
MR16 LAMP LOUVER OR
GLASS LENS
SNAP LOUVER
LENS HOLDER
4
SOCKET
GROOVE
CURVED PORTION
OF THE SPRING
4 Snap the curved portion of the spring into the socket groove.
1B
3
1D
MR16 LAMP
BASE
MR16 LAMP
5 SILICON "O" RING
Use MAX 50 Watt MR16 Front Cover Halogen
Lamp with Silver, Gold, & Black Colors.
Use MAX 20 Watt MR16 Front Cover Halogen
Lamp With All Other Colors.
1 Place the louver or the glass lens (optional) into the
Snap Louver Lens Holder.
2 Place the MR16 lamp into the Snap Louver Lens Holder.
3 Press the tabs on both sides of the Snap Louver Lens
Holder against the MR16 lamp to keep it in the position.
5 Put the silicon ring over the MR16 lamp base.
1
1E
SOCKET PIN
LAMP PIN
SNAP LOUVER
LENS HOLDER
7
6
SPRING END
WOK SHADE
6 Place the Snap Louver Lens Holder assembly into the Lil
Wok shade.
7 With the other hand squeeze the spring ends towards each other; meanwhile, place the spring ends into the Lil
Wok shade and push the lamp pins all the way into the socket pins.
SAVE THESE INSTRUCTIONS!
2
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.
A Generation Brands Company
advertisement