Tech Lighting ISO Head Instructions

Installation Instructions for

ISO

H EADS -L OW V OLTAGE

G P I :

This product is ETL listed and suitable only for indoor dry locations and approved for use at any height above the finished floor.

CAUTION:

To reduce the risk of a burn or electric shock during accessory installation, disconnect the power to the fixture.

1A

LENS RING

700FJISO_

920FJISO

1.0

LENS ACCESSORY

1 Unscrew the lens ring.

2 Place the optional lens accessory inside the lens ring.

3 Screw the lens ring back on.

1

SAVE THESE INSTRUCTIONS!

2

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

© 2013 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.

A Generation Brands Company