CYP QU-14S Operation Manual
Add to my manuals
10 Pages
CYP QU-14S is a high-performance HDMI splitter that distributes one HDMI input to four HDMI outputs, supporting 4Kx2K resolution, 3D, 12-bit Deep Color, and High Definition Lossless Audio. It's ideal for simultaneously displaying one HDMI source on multiple TVs or projectors, making it suitable for applications such as showroom displays, university lecture halls, retail sales displays, and commercial presentations.
advertisement
QU-14S
1 to 4 HDMI Distribution Amplifier (4K Resolution)
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 22/15/13 Preliminary release
RDV2 08/07/13 EDID behavior
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 1
6. Operation Controls and Functions ....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel .........................................3
7. Specifications ........................................ 4
8. Connection and Installation ................. 5
9. Acronyms ............................................... 6
1. INTRODUCTION
This range of high performance HDMI splitters provide one HDMI in to four HDMI outputs and support 4Kx2K, 3D, 12-bit Deep Coloer as well as High definition Lossless Audio. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
2. APPLICATIONS
• Simultaneously display one HDMI source on 4 TVs/projectors
• Showroom display
• University lecture hall display
• Retail sales display
• Commercial presentation switcher/scaler
3. PACKAGE CONTENTS
• 1 x 1 by 4 HDMI Splitter
• 1 x 5V DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI equipped source devices such as a DVD/Blu-ray play with
HDMI cables or DVI to HDMI cables
• HDMI equipped displays (TV or monitors) with HDMI cables
5. FEATURES
• Supports HDTV resolutions up to 4Kx2K/30Hz
• HDMI and DVI compatible
• Supports 1080p@60Hz, Deep Color 12-bit
• Supports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio
• Supports 3D
• Supports System reset and EDID selection functions
Note: Displaying HDMI 4Kx2K resolution require the standard 4Kx2K
HDMI cable and display in order for proper image displaying.
1
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER SYNC
1
HDMI OUT
2 3 4
4Kx2K
1 2 3
1
POWER LED
Once the power supply is connected the LED will illuminate.
2
SYNC
This LED will illuminate when the HDMI input port is connected to an active source.
3
HDMI OUT LEDs
These LEDs will illuminate when HDMI output are connected to TV or display monitor.
2
6.2 Rear Panel
HDMI IN
1 2
HDMI OUT
3 4
DC 5V
1 2 3 4 5 6
1
SYS RESET ON/OFF
This switch allows the user to perform a system reset. The default setting is OFF, leave as it is when in normal use. By switching
ON, the unit will perform a reset every 8~10 minutes, in order to perfrom this function the displays must have CEC supported.
When performed successfully, the system will automatically switch the displays to HDMI input 1. They system reset will not perform on those displays that do not have a CEC function.
2
EDID STD/TV
The default factory setting is on TV, leave as it is when the display is properly. The unit will detect the 1 st HDMI output’s EDID when it obtain a 4Kx2K EDID and send out the signal accordingly to all other output ports.
If the 1 st
HDMI output is without a 4Kx2K's EDID the unit will detect all output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device will use the last output port 1's EDID when output port 1 is not connected to a display after every power cycling or switch in between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID’s video at 1080p@60Hz and audio at LPCM 2CH.
3
SERVICE
This slot is reserved for factory service only.
4
HDMI IN
Connect with source equipment such as DVD/Blu-ray or PS3 player.
3
SYS
RESET EDID SERVICE
ON OFF
STD TV
5
HDMI OUT
Connect to HDMI display for instant image display or cascade with another family type transmitter.
6
DC 5V
Plug the 5V DC power supply into the unit and connected the adaptor to an AC outlet.
7. SPECIFICATIONS
Video Bandwidth
300Mbps/9Gbps
Input ports
Output ports
Resolution
Power Supply
Dimensions
Weight
Chassis Material
Silkscreen Color
ESD Protection
1 x HDMI,
1 x USB (Service only)
4 x HDMI
Up to 4kx2k (3840x2160@24/25/30Hz/4096x
2160@24Hz)
5V / 2.6 A DC (US/EU standards, CE/FCC/
UL certified)
215mm(W) x 140mm(D) x 48mm(H)
858 g
Metal
Black
Human Body Model: ±8kV (air-gap discharge)
±4kV (contact discharge)
Operating Temperature
0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature
-20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity
Power Consumption
20~90% RH (non-condensing)
4W
4
8. CONNECTION AND INSTALLATION
Blu-ray Player
HDMI Input
Example Shown:
1 to 4 HDMI Splitter
TV/Monitors
5
9. ACRONYMS
ACRONYM
DTS
EDID
HDCP
HDMI
HDTV
COMPLETE TERM
Digital Theater System
Extended Display Identification Data
High-bandwidth Digital Content Protection
High-Definition Multimedia Interface
High-Definition Television
6
www.cypeurope.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement