Rancilio EPOCA E, S coffee machine User manual

Uso e manutenzione
Emploi et entretien
Gebrauch und Instandhaltung
Use and maintenance
Uso y manutención
Uso e manutenção
Macchina per caffè
Machine à café
Kaffeemaschinen
Coffee machine
Máquina para café
Máquina para café
●E
●S
IT
FR
DE
EN
ES
PT
Gentile cliente,
grazie per averci accordato la Sua fiducia.
Siamo sicuri che il prodotto che Lei ha acquistato risponderà in pieno alle Sue aspettative, come
tutti gli altri articoli della produzione Rancilio. Il prodotto che Lei si accinge ad usare è il risultato
di approfonditi studi e meticolose sperimentazioni fatte dalla Rancilio per offrirLe quanto di più
funzionale, sicuro ed apprezzabile, anche sotto il profilo del design, si possa trovare sul mercato.
Il libretto di istruzioni per il corretto uso e manutenzione della macchina La aiuterà a sfruttare al
meglio le sue elevatissime possibilità e prestazioni.
Con l’augurio di poterLa sempre annoverare tra i nostri clienti, Le auguriamo una buona lettura.
Cher Client,
Nous Vous remercions pour Votre confiance.
Nous sommes certains que le produit que Vous avez acheté correspondra entièrement à Vos désirs,
comme du reste tous les articles de la production RANCILIO. Le produit que Vous allez employer est le
résultat d’études approfondies et de méticuleux essais effectués par RANCILIO afin de pouvoir Vous
offrir le produit le plus fonctionnel, le plus sûr et le plus remarquable, également du point de vue design,
que l’on puisse trouver sur le marché. Le petit livre d’instructions pour l’emploi correct et l’entretien de
la machine Vous aidera à tirer le maximum de ses grandes possibilités et performances. Nous sommes
certains que nos explications sont claires et espérons, cher client, mériter Votre fidélité.
Sehr geehrte Kundin/sehr geehrter Kunde,
Zuerst möchten wir Innen für das uns entgegengebrachte Vertrauen danken.
Wir hoffen, dass das von Ihnen gekaufte Produkt Ihren Erwartungen in jeder Hinsicht entsprechen wirdwie übrigens auch all unsere anderen Erzeugnisse. Das Produkt das Sie in Gebrauch nehmen werden,
ist das Resultat von sorgfältigen von RANCILIO Untersuchungen und Tests, um Ihnen in Bezug auf
Funktionalität, Sicherheit, Leitungsfähigkeit sowie Design ein Produkt anbieten zu können, das das Beste
auf Markt befindliche ist. Das Büchlein mit den Anwiesungen für eine korrekte Bedienung und Wartung
der Maschine wird Ihnen behilflich sein, das Beste aus Ihnem Gerät zu machen. Wir hoffen, dass unsere
Erklärungen verständlich sind und dass Sie auch in Zukunft zu unseren Kunden zählen dürfen.
Mit freundlichen Grüssen.
Dear Customer,
First of all, thank you choosing RANCILIO.
We are confident that the product you have purchased will come up to all your expectations-just as all
our other products are designed to do. The product that you are about to use is the outcome of painstaking research and tests. The Rancilio’s consistency assures quite sure that the equipment we have
supplied you with, is the most functional, safe and satisfactory of its kind to be found on the market, as
regards both its design and its efficency. The booklet of instructions for its correct use and maintenance
will help you to get the best possible service out of your machine. We trust you will find our explanations
clear and we may continue, in the future, to count you among our esteemed customers.
Muy estimado cliente:
muchas gracias por habernos acordado Su confianza.
Estamos seguros que el producto que Ud. ha adquirido responderà seguramente a Sus esperanzas,
asi como és por todos los demás articulos RANCILIO fabrica. El producto que Ud. se apresta a utilzar
és el resultado de particulares estudios y pruebas meticulosas hechas por la firma RANCILIO para
ofrecerle un producto funcional, seguro y apreciable, tambien por lo que se refiere al design, seguramente uno de los mejores que Ud. pueda encontrar en comercio. El manual de instrucciones para
utilizar correctamente y efectuar la manutención de la máquina, la ayudará a disfrutar a lo máximo las
elevadas posibilidades y prestaciones de la misma. Mientras confiamos que Ud. siga siendo siempre
Cliente nuetro, le deseamo una provechosa lectura.
Prezado Cliente,
Obrigado por nos ter dado a sua confiança.
Temos certeza que o produto que Você comprou responderá totalmente as suas expectativas, como
todos os outros artigos da produção RANCILIO. O produto que Você está para usar é o resultado de
estudos profundos e experiências meticulosas feitas pela RANCILIO, para oferece-lhe quanto de mais
funcional, seguro e considerável, também sob o perfil do disign, que se possa encontrar no mercado. O
manual de instruções para o uso correto e manutenção da máquina lhe ajudará a desfrutar ao máximo
as suas elevadíssimas possibilidades e desempenhos.
Com o desejo de poder tê-lo sempre entre os nossos clientes, desejamo-lhe uma boa leitura.
EUROPEAN UNION ONLY
Trattamento dei rifiuti delle apparecchiature elettriche ed elettroniche.
Smaltire il prodotto seguendo le norme vigenti relative allo smaltimento
differenziato presso centri di raccolta dedicati.
Non trattare come semplice rifiuto urbano.
Per qualsiasi informazione necessaria contattare il costruttore all’indirizzo indicato
nel libretto istruzioni.
Il prodotto risponde ai requisiti richiesti dalle nuove direttive introdotte a tutela
dell’ambiente e che deve essere smaltito in modo appropriato al termine del
suo ciclo di vita.
Sähköisten ja elektronisten laitteiden jätteiden käsittely
Hävitä tuote noudattaen seuraavia voimassa olevia lajitellun jätteiden käsittelyä koskevia määräyksiä asianmukaiseen jätteidenkäsittelylaitokseen.
Älä käsittele sitä tavallisena kaupunkijätteenä.
Mitä tahansa tietoja varten ota yhteyttä valmistajaan ohjekirjassa olevaan osoitteeseen.
Tuote on uusien ympäristöä suojaavien direktiivien vaatimusten mukainen ja
se tulee hävittää asianmukaisella tavalla sen käyttöiän päätyttyä.
Treatment of waste from electric/electronic equipment
Dispose of the product in accordance with current regulations concerning differentiated waste disposal in dedicated waste disposal areas.
Do not treat as simple urban waste.
For any information please contact the manufacturer at the address specified in the user
manual.
The product complies with the requirements of the new directives introduced for
the environmental safeguard and must be disposed of appropriately at the end
of its life cycle.
Traitement des ordures des équipements électriques et électroniques
Ecouler le produit conformément aux normes en vigueur concernant l’écoulement différencié auprès de centres de récolte dédiés.
Ne pas traiter comme simples ordures urbaines. Pour toute information nécessaire
contacter le constructeur à l’adresse indiquée dans le manuel d’emploi.
Le produit est conforme aux caractéristiques requises par les nouvelles directives introduites pour la sauvegarde de l’environnement et doit être écoulé de
façon appropriée à la fin de son cycle de vie.
Zaobchádzanie s odpadmi z elektrických / elektronických zariadení
Výrobok likvidujte podľa súčasných predpisov o likvidácii triedeného odpadu na k tomu určených skládkach.
Nezaobchádzajte s ním ako s bežným komunálnym odpadom.
Ak potrebujete akékoľvek informácie, kontaktujte, prosím, výrobcu na adrese uvedenej v návode na použitie.
Výrobok zodpovedá požiadavkám nových smerníc zavedených pre ochranu životného prostredia a zlikvidovať sa na konci svojej životnosti musí
príslušným spôsobom.
Entsorgung von elektrischen und elektronischen Geräten
Das ist Produkt gemäß den geltenden Normen für die Mülltrennung bei den
zuständigen Sammelzentren zu entsorgen.
Nicht wie normalen Müll behandeln.
Weitere Informationen sind beim Hersteller unter der in der Gebrauchsanleitung angegebenen Adresse zu erhalten.
Das Produkt entspricht den Erfordernissen den neuen Richtlinien über den
Umweltschutz, und muss an seinem Lebensende entsprechend entsorgt werden.
Az elektromos és elektronikai készülékek hulladékkezelése
A terméket az erre a célra kijelölt gyűjtőhelyekre adja le követve a szelektív
hulladékgyűjtéssel kapcsolatos jelenlegi jogszabályokat.
Ne kezelje közönséges városi hulladékként.
Bárminemű információért forduljon a gyártóhoz, melynek címét a használati útmutatóban találja.
A termék megfelel a környezet védelme érdekében újonnan bevezetett
irányelvek követelményeinek és ennek megfelelően kell kezelni az élettartamának végeztével.
Tratamiento de los desechos de los equipos eléctricos y electrónicos
Eliminar el producto en los centros de recolección especializados, siguiendo
las normas vigentes relativas a la eliminación diferenciada.
No tratar como simple desecho urbano.
Para cualquier información necesaria, contacten al fabricante en la dirección indicada en el manual de instrucciones.
El producto responde a los requisitos demandados en las nuevas directivas
introducidas para la protección del ambiente y debe ser eliminado de manera
apropiada al final de su ciclo de vida.
Zacházení s odpady z elektrických / elektronických zařízení
Výrobek likvidujte podle současných předpisů o likvidaci tříděného odpadu
na k tomu určených skládkách.
Nezacházejte s ním jako s běžným obecním odpadem.
Potřebujete-li jakékoli informace, kontaktujte prosím výrobce na adrese uvedené v
návodu pro použití.
Výrobek odpovídá požadavkům nových směrnic zavedených pro ochranu
životního prostředí a zlikvidovat se na konci své životnosti musí příslušným
způsobem.
Tratamento do lixo dos aparelhos elétricos e eletrônicos
Jogar o produtos seguindo as normas em vigor relativas à coleta diferenciada em centros de coleta apropriados.
Não tratar como simples lixo urbano.
Para qualquer informação necesssária contatar o construtor no endereço indicado
no manual de instruções.
O produto responde aos requisitos exigidos pelas novas diretrizes introduzidas para tutelar o ambiente e deve ser sucadato em modo apropriado ao
final do seu ciclo de vida.
Elektri- ja elektronseadmete jäätmete töötlemine
Tootest lahtisaamist peab läbi viima vastavalt käibivatele eeskirjadele, mis
käsitlevad jäätmetest eristatud lahtisaamist selleks mõeldud jäätmetest
lahtisaamise alades.
Mitte töödelda nagu tavalisi majapidamisjäätmeid.
Mistahes informatsiooni saamiseks pöörduge palun tootja poole aadressil, mis on
märgitud kasutaja käsiraamatus.
Toode vastab uuetele nõutele, mis on esitletud keskkonna kaitsmiseks ja sellest peab reeglipäraselt lahti saama selle elutsükli lõpus.
Afvalbehandeling van de elektrische en elektronische apparatuur
Verwerk het product volgens de geldende normen m.b.t. de gescheiden
afval bij de voorbestemde vuilniscentrums.
Behandel het product niet als eenvoudig stadsvuil.
Neem contact op met de constructeur op het aangegeven adres in deze handleiding
voor nadere informaties.
Het product beantwoordt aan de door de nieuwe richtlijnen verlangde vereisten ingevoerd ter bescherming van het milieu en moet op passende wijze op
het einde van zijn levenscyclus worden verwerkt.
Kur išmesti elektros \ elektroninės įrangos atliekas.
Šalinkite įrangos atliekas atitinkamai esamų taisyklių, kurios liečia tokios
rūšies atliekas apie specialias atliekų kaupimo vietas.
Nemeskite atliekas į paprastus miesto šiukšlių konteinerius. Papildomos informacijos kreipkitės į gamintoją nurodytu vartotojo instrukcijoje adresu .
Šis produktas atitinka įvestos ekologiniam saugumui naujos direktyvos
reikalavimams ir turi būti sunaikintas pasibaigus jo atitikties terminui.
Behandling af affald fra elektrisk/elektronisk udstyr
Bortskaf produktet i overensstemmelse med nuværende reguleringer vedr.
forskellige affaldsprodukter på deponeringssteder dedikeret til affald.
Må ikke behandles som alm. byaffald.
Kontakt producenten på den specificerede adresse i brugerhåndbogen for yderligere
oplysninger.
Produktet er i overensstemmelse med de nye direktiver, introduceret for miljøforanstaltningen og skal bortskaffes på behørig vis ved slutningen af dets
livscyklus.
Obdelava odpadkov električnih in elektronskih naprav
Odlaganje izdelkov je potrebno vršiti v skladu z veljavnimi predpisi v zvezi z
selektivnim odlaganjem odpadkov v centrih za zbiranje odpadkov ki so temu
namenjeni. Ne odlagajte ga kot običajne smeti.
Za kakršnokoli informacijo kontaktirajte proizvajalca na naslovu, ki je naveden v
priročniku z navodili.
Izdelek odgovarja zahtevam novih smernic, ki so uvedene zaradi zaščite
življenske sredine in mora biti odložen na ustrezen način po koncu življenjske
dobe.
Postępowanie z odpadami pochodzącymi z urządzeń elektrycznych/
elektronicznych
Produkt musi zostać poddany utylizacji zgodnie z obowiązującymi przepisami dotyczącymi segregowania odpadów w specjalnie do tego wyznaczonych miejscach. Nie wyrzucać razem ze zwykłymi odpadami miejskimi.
W celu uzyskania jakichkolwiek informacji proszę skontaktować się z producentem
pod adresem podanym w instrukcji obsługi dla użytkownika.
Ten produkt odpowiada wymogom zawartym w nowych dyrektywach
wprowadzonych w celu ochrony środowiska i po zakończeniu cyklu eksploatacji musi zostać zutylizowany we właściwy sposób.
Avfallshantering av elektriska och elektroniska apparate
Nedskrota produkten genom att följa gällande normer för differentierad sanering på seriösa uppsamlingsställen.
Behandla det inte som vanligt tätortsavfall.
Vid behov av ytterligare information, var vänlig ta kontakt med tillverkaren på den
adress som anges i bruksanvisningen.
Produkten motsvarar de krav som ställs i de nya miljödirektiven och den
måste nedskrotas på ett lämpligt sätt i slutet av sin livscykel.
Behandling av avfall fra elektrisk/elektronisk utstyr
Produktet skal avhendes i samsvar med gjeldende forskrifter angående differensiert avfallsavhending på dediserte avfallsavhendingsområder.
Det må ikke behandles som vanlig byavfall.
For videre opplysninger vennligst kontakt fabrikanten på adressen som er angitt i
bruksanvisningen.
Produktet etterkommer kravene i de nye miljødirektivene og skal avhendes
på en passende måte etter avsluttet bruk.
Kā utilizēt elektrisko/elektronisko iekārtu atkritumus
Iekārtu atkritumus nepieciešams utilizēt atbilstoši spēkā esošajiem noteikumiem,
kuri reglamentē dažādu veidu atkritumu utilizēšanu tikai speciālajās atkritumu
konteineros. Nemetiet šos atkritumus parastajos kopējos pilsētas atkritumu.
Lai saņemtu jebkuru informāciju, griezieties pie ražotāja, kura adrese uzrādīta
ekspluatācijas instrukcijā.
Dotais produkts atbilst jaunās direktīvas prasībām, kura attiecās uz
ekoloğisko drošību, un tas ir atbilstošā kārtībā utilizējams pēc tā, kad nobeigsies tā derīguma termiņš.
20010 Villastanza di Parabiago (MI)
Viale della Repubblica 40
DICHIARAZIONE DI CONFORMITA’ CE - DECLARATION DE CONFORMITE CE
EG-KONFORMITÄTSERKLÄRUNG - EC DECLARATION OF CONFORMITY
DECLARACIÓN DE CONFORMIDAD CE - DECLARAÇÃO DE CONFORMIDADE CE
Noi RANCILIO Macchine per caffè S.p.A.
Dichiariamo sotto la nostra responsabilità che il prodotto: Macchina per caffè per uso professionale
Déclarons, sous notre responsabilité, que le produit : Machine à café d’utilisation professionnel
Wir erklären auf unsere Verantwortung, daß das Produkt: Kaffeemaschine für Beruflichgebrauch
Declare under our responsibility that the product: Espresso coffee makers for commercial use
Declaramos bajo nuestra responsabilidad que el producto: Máquina para café de uso profesional
Declaramos sob a nossa responsabilidade que o produto: Máquina para café para uso profissional
al quale è riferita questa Dichiarazione, secondo quanto prescritto dalle direttive specifiche:
à laquelle se réfère cette déclaration, selon les prescriptions des directives spécifiques.
auf das sich diese Erklärung bezieht, Entsprechend der Vorschriften der spezifischen Richtlinien.
to which this declaration relates is, according to the provisions of the specific directives:
al cual se refiere esta Declaración, de acuerdo con lo prescrito por las específicas directivas:
ao qual se refere esta Declaração, segundo quanto prescrito pelas específicas diretrizes:
98/37/CE
Direttiva macchina - Direttiva machine - Richtlinie Maschine - Makers directive - Directiva máquina - Diretriz da máquina:
73/23/CEE, 93/68/CEE
Direttiva Bassa Tensione - Direttiva Basse Tension - Niederspannungsrichtline - Low Voltage Directive - Directiva Baja Tensiòn - Diretriz Baixa Tensão:
89/336/CEE, 93/68/CEE, 92/31/CEE
Direttiva EMC - Direttiva EMC - Richtlinie EMC - EMC Directive - Directiva EMC - Diretriz EMC
97/23/CE
Direttiva attrezzatura a pressione (PED)-Directive sur les appareillages sous pression (PED)-Richtlinie für unter Druck stehende Geräte (PED) Pressure
device directive (PED) - Directiva equipos de presión (PED) - Diretriz aparelhagem de pressão (PED)
è conforme alle seguenti norme: - conforme aux normes suivantes :
In Übereinstimmung mit den folgenden Normen: - it complies with the following norms:
es conforme a las siguientes normas: - É conforme as seguintes normas:
EN 60335-1, EN 60335-2-75, EN 55014-1, EN 55014-2, EN 61000-3, EN 61000-4, EN 50366
Norme EN armonizzate - Normes EN harmonisées - Harmonisierte EN-Norme - Harmonized EN norms - Normas EN armonizadas - Normes EN Harmonia
Il presidente - The president
La presente dichiarazione perde la sua validità se la macchina viene modificata senza la nostra espressa autorizzazione.
La présente déclaration perd sa validité dès lors que la machine est modifiée sans notre expresse autorisation.
Die vorliegende Erklärung verliert ihre Gültigkeit, wenn die Maschine ohne unsere ausdrückliche Genehmigung verändert wird.
The present declaration will become invalid should the machine be modified without our specific authorization.
La presente declaración pierde su validez si la máquina es modificada sin nuestra expresa autorización.
A presente declaração perde a validade se a máquina é modificada sem a nossa expressa autorização.
MD-CER.01 rev.0.0 del 16/05/05
Descrizione attrezzatura a pressione-Description de l’appareillage sous pression-Beschreibung der unter Druck stehenden GerätePressure device description-Descripción de los equipos de presión - Descrição dos equipamentos de pressão
Caldaia - Chaudière
Kessel - Boiler
Caldera - Caldeira
Scambiatore -Echangeur
Austauscher -Exchanger
Intercambiador
Intercambiador
Pressione - Pression
Druck - Pressure
Presión - Pressão
Temperatura - Température
Temperatur - Temperature
Temperatura - Temperatura
0,18/1,8 Mpa/bar
131,2 C°
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità lt-Capacité lt-Fähigkeit ltCapacity lt-Potencia lt- Potência it
Acqua/Vapore - Eau/Vapeur
Wasser/Dampf - Water/Steam
Agua/Vapor - Água/Vapor
2 gr.
11
Pressione - Pression
Druck - Pressure
Presión - Pressão
Temperatura - Température
Temperatur - Temperature
Temperatura - Temperatura
Fluido - Fluide
Flüssig - Fluid
Fluido - Fluído
Capacità-Capacité
Fähigkeit -Capacity
Potencia-Potência
1.2/12 Mpa/bar
131,2 C°
Acqua - Eau
Wasser- Water
Agua - Água
Numero scambiatore -Numéro de l’échangeur
Nummer des AustauschersExehanger number-Número intercambiador
Número Intercambiador
2 gr.
0.35 l
2
Fig. 1
Fig. 2
mod. E
1
3
6
1
2
4
8
9
2
5
mod. S
1
3
6
1
2
4
8
9
2
5
Fig. 3
12
11
10
Fig. 4
7
H
B
A
D
C
Fig. 5
1 (Ø30mm)
4
ota
vo
LL
2 (3/8"G)
Fig. 6
mod. E
C
D
mod. S
4
E
3
B
A
9
6
5
10
2
1
8
7
Fig. 7
10
Fig. 8
Fig. 9
1
2
3
1
Fig. 10
Fig. 11
11
IT
ITALIANO
12 -23
FR FRANCAIS
24-35
DE DEUTSCH
36-47
EN ENGLISH
48-59
ES ESPAÑOL
60-71
PT
72-83
Português
SCHEMI ELETTRICI SCHEMAS ELECTRIQUES
SCHALTPLANE WIRING DIAGRAMS
ESQUEMAS ELECTRICOS
ESQUEMAS ELÉTRICOS�
EN ENGLISH
CONTENTS
Machine identification data........................... 49
1. General safety rules................................... 49
2.
Description.................................................. 50
2.1. Specifications and composition............. 50
2.2. Machine equipment............................... 50
2.3. Mechanical protective devices.............. 50
2.4. Electric safety devices........................... 51
2.5. Aerial noise............................................ 51
2.6. Vibrations.............................................. 51
3. Technical data............................................. 51
3.1. Dimensions and weights....................... 51
4. Use............................................................... 51
4.1. Precautionary measures....................... 51
84-89
SCHEMI IDRAULICI SCHÉMAS HYDRAULIQUES
HYDRAULIKPLÄNE HYDRAULIC DIAGRAMS
72-83
ESQUEMAS HIDRÁULICOS
ESQUEMAS HIDRÁULICOS
5. Transport..................................................... 51
5.1. Packaging.............................................. 51
5.2. Inspection on receipt............................. 51
6.
Installation.................................................. 52
6.1.Connections to be made by the user...... 52
6.1.1. Water supply..................................... 52
6.1.2. Electric supply.................................... 52
6.2. Connections ......................................... 53
7.
Operation.................................................... 53
7.1. Controls................................................. 53
7.2. Control instruments............................... 54
7.3. Starting up............................................. 54
8.
Use............................................................... 54
8.1. Preparing coffee.................................... 54
8.2. Preparing cappuccino............................ 55
8.3. . Warming a beverage........................... 55
8.4. Preparing tea, camomile, etc.................55
9. Adjustments and settings of the dose..... 55
9.1.For models DE....................................... 55
9.1.1. Adjusting the dose.............................. 55
10. Advanced functions electronic card e06... 56
10.1. Heater pressure regulation from
push-button panel......................................... 56
10.2. Auto-test components.......................... 56
10.3.Diagnostic programming...................... 57
The operations marked with this symbol
are to be undertaken exclusively by an
installation technician
The operations marked with this symbol are
to be undertaken by the user.
48
11.
Maintenance................................................ 58
11.1. Daily..................................................... 58
11.2. Weekly................................................. 58
11.3. Periodical............................................. 58
11.3.1. Renewal of water . .......................... 58
11.3.2. Softener regeneration....................... 59
12. Stopping the machine................................ 59
13. Troubleshooting......................................... 59
NAME:
Coffee machine, EPOCA series
MODEL:
E-S
VERSIONS:
2 GROUPS
The label illustrated on the EC Declaration of Conformity of this instruction manual corresponds to the identification label placed on the machine Fig. 2. (Pos. A).
1
2
3
4
5
6
7
8
9
10
11 12 13 Manufacturer
Model and version
Voltage
EC conformity mark (if required)
Serial number
Boiler data
Machine total absorption Protection level
Motor power
Heating element power
Frequency
Conformity marks
Year of manufacture
Symbols
Warning signal. The instructions which refer to this signal must be followed with great care in order to
avoid accidents or damage to the machine.
This manual is an integral and essential part of the product and must be delivered to the user. The warnings
contained in it must be read carefully, as they supply important indications relating to the safety of installation, use and maintenance. Keep this manual for future reference.
1. GENERAL SAFETY RULES
●Don’t leave the packing elements (plastic bags,
expanded polystyrene, nails, cardboard, etc.)
within the reach of children, as these elements
are potential sources or danger.
●Check that the data on the machine corresponds
to that of the electrical supply network, before
connecting the equipment.
●Adaptors, multiple sockets and /or extensions must
not be used.
●In doubt, request an accurate control of the plant
by qualified personnel. The electric plant must be
provided with the following safety devices:
- efficient earth connection;
- section of conductors suitable for absorption capacity
- efficient earth leakage protection circuit
breaker.
●Install the machine on a water repellent surface
(laminate, steel, ceramic, etc.) away from heat
sources (oven, cooking stove, fireplace, etc.) and
in conditions in which the temperature may not go
below 5°C. KEEP WARM.
●Do not leave the machine exposed to atmospheric agents or place them in damp rooms such as
bathrooms.
●Do not obstruct the suction or dispersion grilles
and do not cover with cloths, etc.
●Keep the packed machine in a dry place, not exposed to atmospheric agents and in conditions in
which the temperature does not go below 5°C.
Do not stack more than three items of the same
kind. Do not place heavy items on the packaging.
●In an emergency, such as the breaking out of a fire,
unusual noise, overheating, etc., take immediate
action, disconnecting the power and closing gas
and water taps.
● Only use original spare parts in order to avoid
compromising the safety and proper functioning
of the machine.
Erroneous installation can cause damage
to people, animals and things for which the
manufacturer cannot be considered responsible
49
2. DESCRIPTION
The machines in the EPOCA series have been designed to prepare express coffee and hot beverages.
A positive-displacement pump inside the machine
powers the heater in which the water is heated. By
pressing the appropriate buttons, water is supplied
to the spouts in the form of hot water or steam, according to needs.
The water to be used for the beverages is supplied
directly by the water supply, pressurized by the pump
and immediately heated by the steam produced by
the boiler.
The machine is composed of a steel carrying structure on which the mechanical and electrical components are fitted. These are completely covered with
panels made of painted polyurethane and stainless
steel.
The beverages are dispensed at the front of the
machine, where all the buttons, control devices and
dispensers are to be found.
There is a cup-warming plate on the top of the machine.
2.1. Specifications and composition
A
B
C
D
E
E
-
ok
2
2
1
S
ok
-
2
2
1
Legend:
On request:
● cup-warmer.
1 2 3 4 5 6 7 8 9 10 11
12
2.2. Machine equipment
2.3. Mechanical protective devices
A Semiautomatic system; manual dispensing start
and stop.
B Automatic system; electronic control of coffee and hot water doses dispensed.
C N. of coffee dispensing units.
D N. of steam spouts.
E N. of hot water spouts.
2 GROUP
1 dose filter holder
1
2 dose filter holder
2
Filters
3
Blind filter
1
1 mt. supply pipe
1
1,5 mt. supply pipe
1
1,5 mt. drainage pipe
1
Pipe connections
1
Doser and presser
1
Instruction manual
1
Brush
1
Wiring diagram
1
50
Steam tap
Steam spout
Hot water tap
Hot water spout
Coffee dispensing unit
Coffee dispensing button
Manual water supply tap
Level indicator
Gauge
Power on-off switch and led
Switch and boiler resistance engagement light.
Cup heater switch and indicator
The machine is equipped with the following protective
devices:
●complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
●cup-warmer plate supplied with a tray to collect
spilt liquids;
●work surface provided with grill and tray to collect
spilt liquids;
●expansion valve in the hydraulic system and valve
on the boiler to avoid overpressure;
●nonreturn valve on the hydraulic system to avoid
flowing back to the main supply.
2.4. Electric safety devices
The safety devices provided are:
●5V low tension push buttons an the DE control key
panel;
●thermal protection on the pump motor;
●safe resistance thermal.
2.5. Aerial noise
Noise level in the working place does not usually
exceed 70dB(A).
2.6. Vibrations
The machine is supplied with rubber vibration damping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
3. TECHNICAL DATA
4.1. precautionary measures
3.1. Dimensions and weights (Fig.5)
2 GROUP
A mm
780
B mm
750
C mm
560
D mm
400
H mm
480
Boiler capacity in litr.
11
Machine weight kg
53
Water inlet
Ømm drainage
3/8”
30
Packaging
Volume cm3
Dimensions L x P x H mm
Gross weight kg
The user must not:
●touch the hot surfaces and dispensing areas;
●place liquids containers on the machine;
●put his hands under the spouts during use;
●transport the machine or carry out maintenance
operations when the plug is connected or when
the machine is hot;
●wash the machine with water or steam jet;
● dip completely or partially the machine in water;
● use the machine if the cable is damaged;
●touch the machine when his hands or feet are wet
or damp;
● use the machine when there are children in its
proximity;
●allow the machine to be used by children or unfit
people;
● obstruct the suction or dispersal grilles with cloth
or any other thing;
●do not use the machine when wet or very damp.
423
910x670x720
67
You’ll find all the technical data on electric
connection, on the machine identification
label Fig. 1.
4. USE
The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held responsible for any damage caused to people
or things due to unsuitable, erroneous or
irrational use of the machine.
The operator must always follow the indications
contained in this manual. In the case of a failure or if
the machine is not working properly, switch it off and
do not attempt any direct repair. Refer exclusively
to a service centre.
This machine may only be used with foodstuffs. It
cannot be used for heating liquids or grinding any
other kind of product that could damage and pollute
it.
The manufacturer cannot be held responsible
for damage to people or things caused by
unsuitable, erroneous or irrational use.
5. TRANSPORT
5.1. Packaging
The machine is delivered in a strong cardboard box
with internal protection.
The packaging bears symbols which must be observed during handling and stocking of the item.
Always keep the package in a vertical position
during transport. Do not turn it over or lay it
on its side and avoid bumping and exposure
to atmospheric agents.
5.2. Inspection on receipt
Check that the machine received corresponds to
the one indicated on the delivery note, including any
accessories.
Check that it has not been damaged during transport
and, if so, inform the forwarder and our customer
service office immediately.
The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must
not be left within reach of children as they are
potential sources of danger.
51
6. INSTALLATION
The appliance is only to be installed in
locations where use and maintenance is
restricted to trained personnel.
The machines are fitted with height adjustable feet.
The support surface shall be levelled, dry, smooth,
steady and stable and at such a height that the cupwarming surface is at over 150 cm from ground. Do
not use water jets or install where water jets are
used.
In order to guarantee normal operation, the machine
must be installed in areas that the environmental
temperature is between +5°C ÷ +32°C end humidity
of not over 70%.
It does not need to be anchored to the surface and it
does not require any technical operations to dampen
vibrations in order to operate properly.
It is recommended to leave the area around the machine free to facilitate its use and the performance
of any maintenance operations.
If the machine is wet or very damp, wait until it is
completely dry before installing or using it. It is always
necessary to request an accurate control to qualified
service people in order to find any possible damage
to the electric components.
Reserve an area near the machine for the installation of the coffee grinding and dosage machine (see
relevant documentation).
The machine is usually equipped with a water softener, type DP2 or DP4, which must be connected
by the user in compliance with the laws in force.
Should a different softener be installed, refer to the
documentation of the relevant product.
A dreg drawer should be fitted by the installer.
6.1. Connections to be made by the
user.
Hook-up must be carried out by qualified
personnel in full accordance with federal,
state and local regulations.
6.1.1. Water supply (Fig.6)
This equipment is to be installed to
comply with the applicable federal, state
or local plumbing codes.
Connections must be installed close to the machine.
●Water drainage pipe 1, having a minimum internal
diameter of 30 mm, equipped with a water-trap
accessible for inspection.
●Water supply pipe 2, with a 3/8"G cut-off tap.
Make sure that the maximum supply pressure does not exceed 6.5 bar; otherwise, install
a pressure reducer.
52
6.1.2. Electric supply
The machine is supplied ready for connection
according to the required electrical specifications.
Before connecting the machine ensure that the plate
details comply with those of the electric distribution
network.
The electrical connection cable must be directly
connected to the connection provided according to
current legislation. Ensure that the earthing system
is efficient and in compliance with current legal requirements.
The earthing system and the lightening protection
system must be realized in accordance with the
provisions of current legislation.
For the supply network use a cable in compliance with
standards with protective conductor (earthing wire).
For three-phase power use a cable with 5 conductors
( 3 phases + neutral + earth).
For single phase power supply use a cable with 3
conductors (phase + neutral + earth).
In both cases it is necessary to provide an automatic
differential switch (Fig. 6) at the start of the power
cable, complete with magnetic release elements in
accordance with the identification plate details (Fig.
1). The contacts must have an opening of equal or
over 3 mm and with dispersed current protection of
30 mA.
Remember that each machine must be fitted with its
own safety elements.
WARNING:
Should the power supply cable be damaged
it is to be replaced by the manufacturer or by
its technical assistance service or by person
with equivalent qualification, in order to prevent any risks.
6.2. Connections
7. Operation
● Place the machine on the horizontal surface previously prepared.
7.1. Controls Fig.7
Before connecting, thoroughly wash the mains water
pipes:
●Leave the water supply taps running at full pressure for several minutes.
●Connect to the mains water supply.
●Connect the machine to the socket.
Thoroughly wash all the water pipes of the machine:
●Leave the water supply taps running at full pressure.
●Switch on main switch 1: wait until the boiler fills
up to the level set.
●Switch on main switch 2 to begin heating the water
in the boiler.
●Operate each unit in order to allow the water to
escape for about one minute; repeat the operation
twice.
●Deliver steam from the steam jets for about one
minute.
●Deliver hot water for about one minute; repeat the
operation twice.
●Switch off switches 1 and 2.
●Empty the water from the boiler: see point 10.3
1 Main switch.
Two-position switch with led.
Turn on the switch, led on, the machine is turned
(apart from the boiler) and the pump is turned on
to fill the boiler;
2 Boiler resistance switch.
Two-position switch with led.
On activating the switch, the led comes on, and
power is supplied to the resistance for the boiler
water.
3 Coffee dispenser switch (mod. S)
On pressing the button, continuous coffee dispensing begins and the led comes on.
On re-pressing the switch, the coffee delivery stops
and the led goes out.
4 Electronic coffee delivery button panel.(mod.
E). Five buttons with relative led:
A Press the button for a second, led on, release
button; a small coffee is dispensed.
The led turns off and dispensing ceases.
B Press the button for a second, led on, release
the button; two small coffees ar dispensed from
the same unit.
The led turns off and dispensing ceases.
IMPORTANT
Should the machine not deliver water for over
24 hours, wash the internal components before beginning work, repeating the operations
as described above
C Press the button for a second, led on, release
the button; a big cup of coffee is dispensed.
The led turns off and dispensing ceases.
ATTENTION
Please be informed that in order to avoid
pressure falls during the boiler filling we fitted
into the filling solenoid valve a restription Ø
1.25 mm.
If, during the installation, the machino get in
security mode (the on/off selection on the
touch pad will flash) reset the machine using
the main switch.
D Press the button for a second, led on, release
the button; two big cups of coffee are dispensed
from the same unit.
The led turns off and dispensing ceases.
E Press the button for a second, led on, release
the button; coffee is continuously dispensed.
Press the button for a second, led off, release
button; continuous dispensing of coffee ceases.
To interrupt brewing once the operation has been
activated with buttons A-B-C-D, press the same
button again or press E.
5 Hot water supply tap.
Tap: turn in an anticlockwise direction to open and
clockwise to close.
6 Steam supply handwheel.
Tap: turn in an anticlockwise direction to open and
clockwise to close.
7 Supplementary manual water supply tap positioned under the cup-stand grille and normally
kept turned off.
Turn on the tap to fill the boiler and turn it off when
the correct level is reached.
53
7.2. Control instruments (Fig.7)
8 Gauge with mobile needle on a fixed dial with a
double scale.
Visual control of the pump (lower manometer ) and
of the boiler pressure (upper manometer) (mod.
E-S).
9 Minimum and maximum water level indicator .
Visual control of water level in boiler (green
Led).
10 Cup-heater switch (optional).
Two-position switch with led.
By turning on the switch (led on), the cup heating
resistance is power supplied.
7.3. Starting up
Model S
●Turn on the water supply tap 2 Fig.6.
●Turn the main switch 1; the pump is activated,
filling the boiler.
●When the level has been reached the pump stops,
then activate switch 2 to begin heating the water
in the boiler then turn each one until water begins
to flow from them.
● Wait for the machine to reach its working pressure,
and to reach the correct thermal balance.
Model E
●Turn on the water supply tap 2 Fig.6.
●Turn on main switch 1 and resistance switch 2.
The pump for boiler filling will activate (red led on
level indicator 9).
●Only after reaching the level (green led on level
indicator 9) the resistances for water heating in
the boiler are powered,then activate every single
group until water comes out.
●During the heating phase the leds of the keys
switch on in sequence from left to right until the
working pressure is reached.
Only when the rated pressure is reached it is
possible to adjust the doses.
Warning! This sequence will be repeated at
every switching on.
54
8. USE
The machine has a top shelf on which the cups are
kept and heated, ready for use.
This is very important to obtain good coffee as the
pre-warmed cup stops the coffee from growing cold
too quickly.
8.1. Preparing coffee
●Unclamp the filter-holder from the dispensing unit
and knock any grouts out into the drawer especially provided for this purpose, taking care not to
damage the rim of the filter.
●Use the filter for 1 or 2 coffees, according to
need.
●Fill the filter with the measure of coffee, level it off
and press it down gently with the presser.
●Remove any ground coffee that has stuck to the
rim of the filter while pressing.
If ground coffee is left on the rim of the filter, a
leaktight seal is not ensured, with consequent
leaking of water and coffee grounds.
●Lock the filter-holder into the dispensing unit firmly
to obtain a leaktight seal.
●Place the cups under the spouts and start pouring
using control 3 or button panel 4 according to
model (Fig.7).
●When the coffee has been poured, leave the filterholder attached to the dispensing unit until the next
coffee is required.
When pouring, beware of the hot parts of the
machine, especially the coffee dispensing
units, the steam and hot water spouts. Do not
put your hands for any reason under the units
and the spouts when they are operating.
The grinding of the coffee beans is of fundamental
importance to the making of good coffee, and the
granular texture of the resulting grounds should
be such that it takes 25-30 seconds to produce the
beverage. If the coffee is ground too coardsely the
coffee will be pale in colour and weak in flavour, with
only a very small amount of white cream, and if the
grounds are too fine, the coffee will be dark with no
cream. Good coffee can only be made if the beans
are freshly and uniformly ground (only possible when
the blades of the coffee grinder are sharp) and are
then measured out into the correct quantities (roughly 6 grams per measure). For a correct use, set
the boiler at 1 bar.
The importance of freshly ground coffee beans is
due to the fact that once ground, they rapidly lose
their aromatic qualities, and fats present in the beans
go rancid.
●Make cup of cappuccino with the express coffee.
9. ADJUSTMENT AND SETTING OF THE
DOSE (where available)
●Use a high and narrow jug, half-filled with milk.
9.1. Models E
8.2. Preparing cappuccino (Fig.8)
● Place the jug under the spout so that the nozzle
touches the bottom.
●Turn on the steam tap and lower the jug so that
the nozzle is almost at the surface of the milk.
●Continuously move the jug up and down so that
the nozzle moves in and out of the milk, causing
it to froth.
●Turn off the steam tap and pour the milk into the
cup.
Immediately after carrying out this operation,
clean the spout with a sponge or a clean
cloth so that the milk does not dry on it. Be
careful as the spout is hot and may burn
your hand.
8.3. Heating a beverage
●Immerse the steam spout into the liquid to be
heated.
●Gradually turn on the steam tap 6 Fig.7; the steam
that bursts in the liquid heats it to the desired temperature.
●Turn off the steam tap when the desired temperature has been reached.
Immediately after carrying out this operation,
clean the spout with a sponge or clean cloth.
Be careful as the spout is hot and may burn
your hand.
8.4. Preparing tea, camomile, etc.
●Place the jug under the hot water spout and turn
the water tap 5 (Fig.7). When the desired quantity
has been obtained, turn off the tap.
●Add the beverage desired.
When purified water is used, these beverages often
assume a darker colour.
Should the user prefer a lighter coloured drink, draw
fresh water from an ordinary tap and proceed with
the heating phase as described in point 8.3.
It is possible to adjust the dose of coffee dispensed
E models.
9.1.1. Adjusting the dose
The coffee dose adjustments are made by acting
on the group keyboads with machine at rated pressure.
1 Press the button E on any button panel and hold
it down for 8-10 seconds until water stops flowing
from the dispensing unit and the led of the continuons button on the first button panel on the left
begins flashing.
2 It is necessary to act as to make 1 or 2 cups in order to reach the correct coffee amount adjustment
in the cup.
3 Put the filter-holder (with ground coffee) on the left
unit and the cup under the spout.
4 Operate the selected button (i.e. button A for one
small cup).
5 One the required coffee amount in the cup has
been reached, press the stop button E. Coffe will
stop pouring and the microprocessor will store the
dose.
6 Press the continuous button E again; the led will go
out and the machine will store the new quantity.
7 Make the coffee and check the cup amount in order
to check that programming is correct.
If some doses have to be changed (B-C-D), once
at point 5 repeat the instructions in points 3-4-5 for
each dose, remembering to use the filter-holder with
relevant filter and freshly ground coffee.
Then carry out point 6 and repeat point 7 to check
all changed doses.
If all units are to be programmed with the same doses,
the selection of coffee doses is finished. If the dosage
of another unit is to be changed (1-2-3-4 doses), proceed as indicated in the above-mentioned point 1-7,
using only the button panel of the selected unit.
55
10. ADVANCED FUNCTIONS ELECTRONIC
CARD E06
10.1. Heater pressure regulation from pushbutton panel
With card E06 it is possible to regulate heater pressure directly from the push-button panel without any
need whatsoever of a technician to intervene on the
internal electronics of the machine
This is possible thanks to an electronic pressure transducer that detects heater pressure in real time.
To enter the regulation menu proceed as follows:
- Switch off the machine.
- Keeping push-button E of the first group pressed
(fig. 7) switch on the machine.
- Push-buttons A and B will light up to indicate 1-bar
default regulation.
In this menu, only push buttons A, B, C, D (fig. 7)
of the first group are active with the following functions:
A = Push button + (pressure increase with 0.1-bar
step).
B = Push button – (pressure decrease with 0.1-bar
step).
C = 1 bar (factory set at 1 bar).
D = ESC (regulation save and exit from menu).
To increase pressure
Press push button A, considering that each time it is
pressed, heater pressure increases by 0.1-bar step
up to a maximum 1.4 bars.
Pressure increases instantly (regulation visible by
means of heater pressure gauge).
To decrease pressure
Press B, considering that each time it is pressed
pressure decreases in real time by 0.1 bar step to a
maximum of 0.6 bars.
Opening the steam head, the new pressure regulation
can be assessed immediately by means of the heater
pressure gauge.
Push buttons A and B flash to indicate setting of
heater pressure as follows:
56
LED PUSH
BUTTON A
LED PUSH
BUTTON B
PRESSURE
[bar]
ON
4 flashes
0,6
ON
3 flashes
0,7
ON
2 flashes
0,8
ON
1 flash
0,9
ON
ON
1,0
1 flash
ON
1,1
2 flashes
ON
1,2
3 flashes
ON
1,3
4 flashes
ON
1,4
By pressing button C the factory 1-bar regulation
is set.
After having regulated the desired pressure, press D
to save the setting and quit the menu.
ATTENTION: during programming, water dispensing is interrupted while heater pressure control is
in use.
10.2. Auto-test components
Electronic card E 06 foresees auto-testing
with which it is possible to verify operation of the
electric/electronic components of the machine one
by one.
In order to utilise this function it is necessary to enter
the electronic card by dismantling the left panel of the
machine (a descriptive label of the auto-test function
is attached to the inside of the panel).
The sequence is guided by means of the display at
the centre of the electronic card.
Since the auto-test is carried out on the open
machine, be careful not to touch the parts
under voltage.
To enter the auto-test menu proceed as follows:
- Switch off the machine.
- Keeping push button A of the first group pressed
(fig. 7) switch on the machine.
- Push buttons A, B, C and D (fig. 7) light up and
the card display indicates 0 (auto-test menu in
operation).
In this menu only push buttons A, B, C, D of the first
group operate with the following functions:
A = Push button + (increases the number/letter corresponding to the component to be activated).
B = Push button – (decreases the number/letter corresponding to the component to be activated).
C = Enter (component activation).
D = ESC (quit component activation).
During activation of the component, the display point
will flash.
Each value indicated on the display corresponds to
the auto-test of the following components:
0 = auto-test ON
1 = electro-valve group 1 (ON for 3 seconds)
2 = electro-valve group 2 (ON for 3 seconds) (*)
3 = electro-valve group 3 (ON for 3 seconds) (*)
4 = electro-valve hot water supply
(ON for 3 seconds) (*)
5 = electro-valve charge (ON for 3 seconds)
6 = pump motor (ON for 3 seconds)
7 = 1st heater resistance element (ON for 5 seconds) (**)
8 = 2nd heater resistance element (ON for 5 seconds) (**)
9 = 3rd heater resistance element (ON for 5 seconds) (**)
A = push-button panel/LED (pressing each button,
the corresponding LED flashes)
B = volumetric meter group 1 (100-pulse supply)
C = volumetric meter group 2
(100-pulse supply) (*)
D = volumetric meter group 3
(100-pulse supply) (*)
E = heater level (water charge if level is not
sufficient)
F = pressure transducer (heater resistance ON until
heater pressure set-point is reached)
(*) Only for predisposed machines.
(**) Only for machines with star resistance connection.
Some of the auto-test operations involve the
dispensing of hot water and steam; take care
in order to avoid possible burns.
Push buttons A and B (fig. 7) scroll display numbers
and letters after being positioned on the letter corresponding to the component to be tested. Press C
to activate;
Push-button D quits component activation.
To quit auto-test menu switch off the machine then
switch on again.
Note: Press esc to quit operations A, E and F
During auto-test, brewing will be interrupted and the
heater will not be fed (except for test F).
10.3. Diagnostic programming
Electronic card E 06 allows the operation of diagnostic programming with which possible machine
failures or malfunctions can be signalled.
In order to utilise this function it is necessary to access the electronic card by dismantling the left panel
of the machine (a descriptive label of the auto-test
function is attached to the inside of the panel).
As the use of diagnostic programming is carried out on the open machine, take care not
to touch the parts under voltage).
Malfunctions are visualised on the display situated
at the centre of the electronic card.
Electronic card E 06 allows the operation of diagnostic programming with which possible machine
failures or malfunctions can be signalled.
In order to utilise this function it is necessary to access the electronic card by dismantling the left panel
of the machine (a descriptive label of the auto-test
function is attached to the inside of the panel).
As the use of diagnostic programming is carried out
on the open machine, take care not to touch the parts
under voltage).
Malfunctions are visualised on the display situated
at the centre of the electronic card
Possible failures in course are indicated on the
electronic card display by means of numbers or letters (in case of more than one failure simultaneously,
the corresponding numbers/letters are alternately
displayed):
1 = Time-out Heater filling level: time limit for correct
heater filling has been exceeded.
2 = Time-out Heater pressure set-point: the time
limit to reach heater pressure set-point has been
exceeded
3 = Electronic card 12Vdc short: short circuit in the
electronic card E 06
4 = Capacity level sensor 12Vdc short: capacity level
sensor supply has short-circuited. (*).
5 = Pressure transducer 12Vdc short: pressure transducer supply has short-circuited.
6 = Volumetric counter 12Vdc short: short circuit on
the supply of volumetric counters.
7 = 5Vdc push-button panel short: the push-button
panel has short-circuited.
8 = Transducer/probe short on output signal: short
circuit on output signal from the pressure temperature probe / transducer.
9 = Open transducer/probe signal: the output signal
from the temperature probe/transducer has been
interrupted.
A = Absence of volumetric counter impulses group
1: the volumetric counter of the first group is not
transmitting impulses to the electronic card.
B = Absence of volumetric counter impulses group 2:
the volumetric counter of the second group is not
transmitting impulses to the electronic card. (*).
C = Absence of volumetric counter impulses group
3: the volumetric counter of the third group is not
transmitting impulses to the electronic card (*).
(*) Only for predisposed machines.
The failures identified by numbers 1 to 9 block machine utilisation. Apart from the failure being indicated on
the display, the push-button panel LED will flash simultaneously informing the user of the malfunction.
After having identified and resolved the failure,
switch the machine off and then on again for normal
utilisation.
NOTE: The problems identified with the letters A, B
and C do not interrupt the functions of the machine.
They are identified on the display and during dispensing from the corresponding group, the LED of the
button pressed will flash.
57
11. MAINTENANCE
Maintenance operations have to be carried
out when the machine is off and cold and
the plug is disconnected. Some particular
operations have to be effected when the
machine is operating.
Do not clean the machine by using metal or
abrasive devices, such as steel wool, metal
brushes, needles, etc. or general detergents
(alcohol, solvents, etc.)
When necessary, use special detergents
for coffee machines that can be bought in
specialized service centres.
11.1. Daily (Fig.9)
Use a clean cloth or sponge that does not leave hairs
or fluff (preferably cotton or linen).
● Carefully clean the outside surface, following the
grain of the satin finish on the parts in stainless
steel.
●Clean the steam and hot water spouts, check that the
nozzles are not encrusted (if they become encrusted,
be careful not to deform or damage them).
●Clean the spray units and the seals under the casing of the delivery units using the special brush
supplied
●Remove the filter-holders of the machine and remove the filters and the clamp which secures the
filter, use a brush to remove any coffee deposits
and rinse with hot water in order to dissolve any
grease deposits.
11.2. Weekly
Operations to be carried out with the machine
operative and under pressure.
●Place the supplied blind filter in the filter-holder,
put in a spoonful of detergent in powder for coffee
machines and fit the filter-holder in the unit to be
cleaned.
●Press the coffee dispensing button and draw water
for approx. 30 seconds.
●Stop and start dispensing several times until clean
water comes out of the discharge unit tube.
●Remove the filter-holder, take out the blind filter and
insert a normal one.Replace the filter-holder on the
unit and rinse by drawing water several times.
●Make a coffee to eliminate any unpleasant taste.
58
Cleaning the filters and delivery heads (Fig.9)
Operation to be carried out when the machine is off
and cold.
●Prepare a solution of 4 sachets of detergent
powder Code 69000124 dissolved in a litre of
boiling water in a stainless steel, plastic or glass
recipient (NOT ALUMINIUM OR IRON).
●Remove the filters and immerse them with the filter
holders in the prepared solution, leaving them for
at least 10/20 minutes (all night is better).
●Remove them from the container and rinse them
thoroughly in running water.
Tank cleaning (Fig.10)
●Remove the cup-stand grille 1 (Fig.10) and
clean.
11.3. Periodical maintenance
Operation to be carried out with the machine
under pressure.
●Discharge the water from the boiler (about four
litres) with hot water delivery switch 6.
●Wait until the machine has returned to heat equilibrium before reuse.
11.3.1. Renewal of water in the boiler
To be carried out only by qualified personnel.
●Turn off the machine and wait for the pressure in
the boiler to diminish (gauge needl on “0”).
● Remove the cup-holder grid.
●Insert a rubber hose (1) into the hose-end fitting (2)
●Loosen the hose-end fitting (2).
●Allow the water to flow out completely; then, close
the fitting (2) and remove the rubber hose (1).
●Refill the boiler (paragraph 7.3.).
11.3.2. Regeneration
Softener DP2 - DP4
Regenerate the water softener within the time-limits specified for the softener as follows:
DP2
nr.1 regeneration per month for 500 coffees/day;
nr.2 regenerations per month (once a fortnight) for
1000 coffees/day.
DP4
nr.1
day;
nr.2
regeneration per month for 1000 coffees/
regenerations per month (once a fortnight) for 2000 coffees/day.
This table has been drawn up according to a water hardness of 25 degress calculated on the French scale.
See the documentation included with the softener
for the instructions for use.
12. STOPPING THE MACHINE
A - Temporary stop
13. PROBLEMS AND REMEDIES
Check operations to be carried out by the
user with the plug disconnected.
For any type of problem or inconvenience
not specifically indicated, disconnect the
plug and contact our service centre without
attempting any direct repairs.
A)The machine does not start:
- check that the plug is connected;
-In case of power failure wait for the power to return
and check if the earth leakage protection circuit
breaker or the main switch is on;
- check the condition of the plug and the supply
cable; if damaged have them replaced by qualified
personnel.
B)There is water under the machine:
- check that the drainage tray is not obstructed.
C) Slow dispensing:
- check that the filters and delivery heads are
clean;
- check that the coffee is not too finely ground.
D)Irregular steam delivery:
- check that the nozzles are not obstructed.
●Carry out cleaning and maintenance operations.
●Wind up the cable and fasten it to the machine
with sticky tape.
●Cover the machine and place it in a dry room. Do
not leave it exposed to atmospheric agents and
do not allow it to be touched by children or unift
persons.
To disconnect from the main power supply, consult
qualified personnel.
B - Definitive stop
●Besides carrying out the operations necessary for
a temporary stop, cut off the cable, pack the machine in cardboard, polystyrene or other packing
material and consign it to firms authorized for its
disposal or to second-hand goods dealers.
59
SCHEMI ELETTRICI
SCHEMAS ELECTRIQUES
SCHALTPLANE
WIRING DIAGRAMS
ESQUEMAS ELECTRICOS
ESQUEMA ELÉTRICO
IT
FR
DE
EN
ES
PT CA = Centralina autolivello Controle de niveau Wasserniveaukont
Water level control
Transd. autonivel
Central auto nível
de l’eau
rolle
CPU = Scheda CPU
Fiche CPU
Karte CPU
CPU Board
Tarjeta CPU
Placa CPU
CV = Contatore volumetrico Compteur volumetrique Volumenzaehler
Flow Meter
Contador volum.
Contador volumétrico
EA = Elettrovalvola acqua
Electrovanne eau
Wasserelektroventil
Water electrovelve
Electrovalvula agua
Válvula Elétrica da água
EAR = Elettrovalvola aria
Electrovanne air
Luftelektroventil Air electrovalve Electrovalvula aire
Válvula Elétrica do ar
EC = Elettrovalvola carico
Electr. de chargement Speisungselektroventil Feeding electrovalve Electrovalv. carga
Válvula Elétrica abast.
EE = Elettr. Economizzatore Electr. economizeur
Ekonomiserelektroventil Economizer electr.
Electr. Economizador V.Eletr. Economizador
EG = Elettrovalvola gruppo Electr. du groupe
Gruppeelektroventil
Group Electrovalve Electrovalvula grupo
Válvula Elétrica grupo
EV = Elettrovalvola vapore Electrovanne vapeur Dampfelektroventil Steam valve Electrovalvula vapor
Válvula Elétrica vapor
F
= Fusibile
Fusible
Sicherung
Fuse
Fusible
Fusível
IG
= Interruttore generale
Interrupteur general
Hauptschalter
Main switch
Interruptor general
Interruptor geral
IG1-4= Interruttori gruppo
Interrupteurs groupe
Gruppenschalter
Group switches
Interruptores grupo
Interruptores do grupo
IA
= Interruttori acqua
Interrupteurs eau
Wasserschalter
Water switches
Interruptores agua
Interruptores da água
IR = Interruttore Resistenza Interrupteur resistance Heizungsschalter
Resistance Switch
Interruptor resist.
Interruptor da Resist.
IS
= Interruttore scaldatazze Interrupteur chauffe Schalter Tassenwärmer Cup heating switch
Interruptor calienta Interruptor aquec.
tasses
tazas
xícaras
LC = Lampada livello
Lampe niveau
Lampe für WasserstandLevel lamp
Lámpara de nivel
Lâmpada nível
M
= Morsettiera allacciam. Boit a bornes pour Anschhlussklemmleiste Mains Power Bloque de terminales Conj. bornes ligação
branchement
Connection
MP = Motore pompa
Moteur pompe
Pumpen motor
Motor Pump
Motor bomba
Motor da bomba
MRE = Micro Relé pompa
Micro Relé pompe
Micro Relé pumpen
Pump micro Comtactor Micro Relé bomba
Micro Relé bomba
MT = Morsetto di terra
Borne du sol
Erdklammer
Earth connection
Conexion de tierra
Borne do terra
P
= Pressostato
Pressostat mecanique Mech. druckwaechter Mechanic pressure Presostato mecanico Interrup. Mec. Pressão
switch
RC = Resistenza caldaia
Resistance chaudiere Kesselheizung
Boiler Heating Resist. Resist. Caldera
Resistência da caldeira
RS = Resistenza scaldatazze Resistance chauffe Tassen warmerheizung Cups Heating Resist. Calienta tazas Resistência aquec.
tasse
Resistance
xícaras
RP = Relé pompa
Relé pompe
Relé pumpen
Pump contactor
Relé bomba
Relé bomba
SA = Scheda autolivello
Carte autoniveau
Wasserstandkarte
Autolevel board
Ficha de autonivel
Placa auto nível
SL = Sonda Livello
Sonde niveau
Standfühler
Level feeler
Sonda nivel
Sonda nível
SP = Sensore di pressione Capteur de pression
Drucksensor
Autolevel board
Detector de presión
Sensor de pressão
ST = Sonda temperatura
Sonde Temperature
Temperatur Sonde
Temperature Probe
Sonda de temp.
Sonda temperatura
STS = Sonda temp.TS/TSC Sonde Temperature Temperatur Sonde Temperature Probe Sonda de temp. Sonda temperatura
TS/TSC
TS/TSC
TS/TSC
TS/TSC
TS/TSC
TA = Tasto acqua
Touche eau
Wassertaste
Key water
Tecla agua
Tecla água
TF = Tastiera funzioni/servizi Clavier function/service Funktion/Dienst druck Function/service Botonera/Funciòn/
Teclado funções/
keyboard
servicio
serviços
TG = Tastiera gruppo
Clavier groupe
Gruppedruckknoepfe Group Keyboard
Botonera grupo
Teclado grupo
TM = Trasformatore
transformateur
Transformator
Transformer
Transformador
Trasformador
TP = Tastiera programmazione Clavier de programmation Programmiertastatur
Program Keyboard
Botonera programación Teclado programação
TR = Teleruttore
Télérupteur
Fernschalter
Transformer
Telerruptor
Contador
TS = Termostato di sicurezza Thermostat de sécurité Sicherheitsdruckwächter Safety thermostat
Termóstato de seguridad Termostato de segurança
TTSC= Tastiera TSC
Clavier TSC
Tastatur TSC
TSC keyboard
Botonera TSC
Teclado TSC
Ar = Arancio
Orange
Orange-farbig
B
= Blu
Bleu
Blau
Bi
= Bianco
Blanc
Weiss
BiB = Bianco-Blu
Blanc-Bleu
Weiss-Blau
BiN = Bianco-Nero
Blanc-Noir
Weiss- Braun
G
= Giallo
Jaune
Gelb
GV = Giallo-Verde
Jaune-vert
Gelb-gruen
M
= Marrone Marron
Braun
N
= Nero
Noir Schwarz
R
= Rosso
Rouge
Rot
Ro = Rosa
Rose
Rosa
V
= Verde
Vert
Gruen
Vi
= Viola
Violette
Violett
84
Orange
Blue
White
White-Blue
White-Black
Yellow
Yellow-green
Brown
Black
Red
Rose
Green
Violet
Naranja
Azul
Blanco
Blanco-Azul
Blanco-Negro
Amarillo
Amarillo-verde
Marron
Negro
Rojo
Rosado
Verde
Morado
Laranja
Azul
Branco
Branco-Azul
Branco-Preto
Amarelo
Amarelo-Verde
Marrom
Preto
Vermelho
Rosa
Verde
Roxo
85
N
L1
L2
L3
M1
TS
REV.
IR
IG
TR
IS
DESCRIZIONE
GV
RS
IG1
2
1
5
4
EG1
TR
DATA
GV
IG2
5
4
EG2
FIRMA
2
1
N° CTI
Viale della Repubblica 40
20010 Villastanza di Parabiago-Mi-Italia
Tel +39 0331 408200
Fax +39 0331 551437
www.rancilio.com [email protected]
P
EC
CODICE:
MC
M
N
M
MC
SE_1279_2007
AR
SCHEMA
ELETTRICO
MP
GR
B
346 - 415 V/3N~
EPOCA 2
LC
VERS. S 2 gr.
DENOMINAZIONE:
PROGETTO:
RC
6
RO SL
N
C
R N.O.
AR N.O.
8
9
Formato:
Firma:
Data:
A4
U.T.
26/09/07
Diffusione e riproduzione
vietata a termini di legge
senza nostra autorizzazione.
CA
4
GV SR
7
1
2
F
N
N
B
SL
86
N
L1
L2
L3
TS
IR
IG
M1
TR
IS
RS
RC
SP
TR
MP
M
1
J1
F1 = T1A
J5
J13
J4
J12
F2 = T4A
EC
J6 J7
J10
LC
FT1
J8
Viale della Repubblica 40
20010 Villastanza di Parabiago-Mi-Italia
Tel +39 0331 408200
Fax +39 0331 551437
www.rancilio.com [email protected]
CPU
J11
J14
1
EPOCA 2
SCHEMA
ELETTRICO
CODICE:
SE_1328_2007
VERS. E 2 gr. 346 - 415 V/3N~
DENOMINAZIONE:
PROGETTO:
EG2
TG2
TG1
SL
Formato:
Firma:
Data:
A4
U.T.
26/09/07
Diffusione e riproduzione
vietata a termini di legge
senza nostra autorizzazione.
EG1
CV2
CV1
COLLEGAMENTO ELETTRICO
BRANCHEMENT ELECTRIQUE
STROMANSCHLUSS
ELECTRONIC CONNECTION
CONEXION ELECTRICA
R
S
L3
M
L2
N
T
L1
GR
346V ÷ 400V / 3N~
N
COLLEGAMENTO TRIFASE A STELLA CON NEUTRO
BRANCHEMENT TRIPHASE EN ETOILE AVEC NEUTRE
DREIPHASIGER STERN ANSCHLUSS MIT MITTELEITER
THREE-PHASE STAR CONNECTION WITH NEUTRAL
CONEXION TRIFASICA A ESTRELLA CON NEUTRO
LIGAÇÃO TRIFÁSICA EM FORMA DE ESTRELA, COM NEUTRA
N
GV
B
2 GR.
L
L3
L2
200V ÷ 240V
N
L1
M
COLLEGAMENTO MONOFASE
BRANCHEMENT MONOPHASE
EINPHASINGER ANSCHLUSS
SINGLE-PHASE CONNECTION
CONEXION MONOFASICA
LIGAÇÃO MONOFÁSICA
N
B
H07RN-F 5x2,5 mm2
GV
2 GR.
H07RN-F 3x2,5 mm2
120V~ / 220V~ U.S.A.
L
L3
L2
N
L1
N
COLLEGAMENTO MONOFASE
BRANCHEMENT MONOPHASE
EINPHASINGER ANSCHLUSS
SINGLE-PHASE CONNECTION
CONEXION MONOFASICA
LIGAÇÃO MONOFÁSICA
N
BI
V-GV
2 GR.
2 GR
100V÷120V~
200V÷240V~
SO, SJO, SJTO 3x10 AWG
SO, SJO, SJTO 3x12 AWG
PONTICELLI FORNITI IN DOTAZIONE
JUMPERS ARE WITH THE SUPPLIED
ZUSATZBRUCKEN SIND IN AUSSTATTUNG
PONTETS INSERES DANS LA DOTATION
PUENTES ESTAN INCLUIDOS EN EL MATERIAL DE DOTACION
PONTINHAS FORNECIDAS
IL CONDUTTORE DI TERRA (GV) DEVE ESSERE PIU' LUNGO DI 9 cm RISPETTO AI RIMANENTI
THE EARTH CONDUCTOR (GV) MUST BE LONGER THAN THE OTHERS OF 9 cm
DER ERD STROMLEITER MUSS LAENGER ALS 9 cm IN BEZUG AUF DEN RESTLICHEN STROMLEITER SEIN
LE CONDUCTEUR DE TERRE DOIT ETRE PLUS LONG DE 9 cm PAR RAPPORT A LES AUTRES
LA LONGITUD DE LA TOMA DE TIERRA TIEN ESSER SUPERIOR A 9 cm RESPECTO AL RESTO
O FIO TERRA (GV) DEVE SER 9 cm MAIS COMPRIDO DO QUE OS RESTANTES
M
N
B
BI
V
GV
BIN
BIB
VI
R
=
=
=
=
=
=
=
=
=
=
MARRONE
NERO
BLU
BIANCO
VERDE
GIALLO-VERDE
BIANCO-NERO
BIANCO-BLU
VIOLA
ROSSO
MARRON
NOIR
BLEU
BLANC
VERT
JAUNE-VERT
BLANC-NOIR
BLANC-BLEU
VIOLET
ROUGE
BRAUN
SCHWARZ
BLAU
WEISS
GRUEN
GELB-GRUEN
WEISS-SCHWARZ
WEISS-BLAU
VIOLET
ROT
BROWN
BLACK
BLUE
WHITE
GREEN
YELLOW-GREEN
WHITE-BLACK
WHITE-BLUE
VIOLETT
RED
MARRON
NEGRO
AZUL
BLANCO
VERDE
AMARILLO-VERDE
BLANCO-NEGRO
BLANCO-AZUL
VIOLETA
ROJO
MARROM
PRETO
AZUL
BRANCO
VERDE
AMARELO-VERDE
BRANCO-PRETO
BRANCO-AZUL
ROXO
VERMELHO
87
SCHEDA ELETTRONICA - Carte électronique - Elektronikkarte Electric board - Tarjeta electrónica - PLACA ELETRÔNICA
mod. epoca e
LV
Sensori livello
Level sensors
Capteurs de niveau
Pegelstandsensoren
Detectores de nivel
Sensores de nivel
Sensore capacitativo
Capacitive sensors
Capteur capacitif
Kapazitiver Sensor
Detector capacitivo
Sensor capacitivo
Sensore resistivo
Resistive sensors
Capteur résistif
Kapazitiver Sensor
Detector resistivo
Sensor resistivo
Sensore caldaia
Sensors boiler
Sonde chaudière
Sensor-Dampfkessel
Sensor de caldera
Sensor da caldeira
1-2 Sonda temperatura PTC
1-2 PTC Temperature probe
1-2 Sonde température PTC
1-2 Temperatursonde PTC
1-2 Sonda temperatura PTC
1-2 Sonda temperatura PTC
2-3 Trasduttore di pressione
2-3 Pressure trasducer
2-3 Transducteur de pression
2-3 Druckgeber
2-3 Transductor de presión
2-3 Transdutor de pressão
Programmazione dosi
Dose program
Programme doses
Programmier. der Dosierungen
Programa dosis
Programar doses
Abilitata
Enabled
Habilitée
Freigegeben
Habilitado
Habilitada
Disabilitata
Disabled
Non habilitée
Nicht freigegeben
No habilitado
Não habilitada
Potenza resistenza
Power resistance
Puissance résistance
Widerstandskraft
Potencia de la resistencia
Potência da resistência
Piena potenza
Full power
Puissance complète
Volle Leistung
Potencia total
Plena potência
2/3 di potenza
2/3 power
2/3 de puissance
2/3 der Leistung
2/3 de potencia
2/3 de potência
Alimentazione resistenze
Resistance power supply
Alimentation résistances
Wasserstand im Heizkessel
Alimentación resistencias
Alimentação das resistências
PV
Led Pompa
Pump led
Led pompe
LED Pumpe
Luz testigo bomba
Led da bomba
SL
Livello acqua in caldaia
Boiler water level
Niveau eau dans la chaudiere
Wasserstand im Heizkessel
Nivel agua en la caldera
Nível da água na caldeira
+5V
+5V
+5V
+5V
+5V
+5V
PT
DO
PW
RS1
RS2
RS3
+5V
DIP-SWITCH
n.1 OFF Regolazione pressione caldaia da tastiera - Réglage de la pression de la chaudière à partir du clavier Kesseldruckregelung an Tastenfeld - Heater pressure regulation from push-button panel Regulación de la presión de la caldera desde el teclado - Regulação pressão caldeira através do teclado
n.1 ON Regolazione pressione R33 - Réglage de la pression R33 - Druckregelung R33 - Heater pressure regulation R33 Regulación de la presión R33 - Regulação pressão R33
n.2 OFF Trasduttore pressione - Transducteur
����������������������������������������
de pression - Druckgeber Pressure trasducer - Transductor de presión - Transdutor de pressão
n.2 ON Trasduttore pressione - ����������������������������������������
Transducteur de pression - Druckgeber Pressure trasducer - Transductor de presión - Transdutor de pressão
n.3-4
88
non toccare - do not touch - ne touchez pas - berühren Sie sich nicht - no toque - não toque
200-240 3V~ mod. e
COLLEGAMENTO-Raccordement-Verbindung-Connection-ConexiónLIGAÇÃO
R
S
T
N
L3
L2
L1
N
M
N
GR
GV
1) Collegare il cavo alimentazione come indicato in
figura.
2) Spostare il collegamento delle resistenze dal connettore siglato 3VN~ in quello 3V~ sulla scheda di
potenza
1) Raccorder le câble d’alimentation comme indiqué
dans la figure.
2) Déplacer le raccordement des résistances du
connecteur avec sigle 3VN~ dans celui 3V~ sur la
carte de puissance
1) Das Versorgungskabel anbringen, wie es auf der
Abbildung angegeben ist.
2) Die Verbindung der Widerstände von Verbinder
3VN~ auf Verbinder 3V~ auf der Leistungskarte
umstecken.
1)Connect cable as shown in the picture.
2) On the power board, move resistance connection
from connector marked 3VN~ to connector marked
3V~
1) Conectar el cable de alimentación como se ilustra
en la figura.
2) Cambiar la conexión de las resistencias del conector
con la sigla 3VN~ a 3V~ en la tarjeta de potencia.
1) Ligar o fio de alimentação como indicado na figura.
2) Transferir a ligação das resistências do conector siglado 3VN~ para àquele 3V~ na placa de potência.
200-240 3V~ mod. S
COLLEGAMENTO-Raccordement-Verbindung-Connection-Conexión-LIGAÇÃO
R
S
T
N
L3
L2
L1
N
M
N
GR
GV
1) Collegare il cavo alimentazione come indicato in
figura.
2) Scollegare i cavi azzurri (neutri) dalla resistenza
elettrica ed isolarli.
1) Raccorder le câble d’alimentation comme indiqué
dans la figure.
2) Débrancher les câbles bleus (neutres) de la résistance électrique et les isoler.
3)Raccorder la résistance électrique de la chaudière
selon le schéma reporté ci-dessus.
1) Das Versorgungskabel anbringen, wie es auf der
Abbildung angegeben ist.
2) Die blauen Kabel (Nullleiter) vom elektrischen
Widerstand abtrennen und isolieren.
3)Den elektrischen Widerstand des Kessels anschließen, wie es weiter oben abgebildet ist.
1)Connect cable as shown in the picture.
2) Disconnect the light blue cables (neutral) from
electric resistance and insulate them.
3) Connect boiler electric resistance according to the
diagram below.
R
S
T
3) Collegare la resistenza elettrica della caldaia secondo lo schema sopra riportato.
1) Conectar el cable de alimentación como se ilustra
en la figura.
2) Desconectar los cables azules (neutros) de la resistencia eléctrica e aislarlos.
3)Conectar la resistencia eléctrica de la caldera según
el esquema que se ilustra arriba.
1) Ligar o fio de alimentação como indicado na figura
2) Desligar os fios azuis (neutros) da resistência
elétrica e isolá-los
3) Ligar a resistência elétrica da caldeira, segundo o
esquema acima.
89
SCHEMI IDRAULICI
SCHÉMAS HYDRAULIQUES
HYDRAULIKPLÄNE
HYDRAULIC DIAGRAMS
ESQUEMAS HIDRÁULICOS
ESQUEMA HIDRÁULICO
IT
FR
DE
EN
ES
PT
CA = Centralina autolivello
Controle de niveau de l’eau
Wasserniveaukontrolle Water level control
Transd. autonivel
Central auto nível
CL
= Caldaia
Chaudière
Kessel
CV
= Contatore volumetrico
Compteur volumetrique Volumenzaehler
EA
= Elettrovalvola acqua
Electrovanne eau
EAR = Elettrovalvola aria
Electrovanne air
EC = Elettrovalvola carico
abast.
Electr. de chargement Speisungselektroventil Feeding electrovalve
EE
= Miscelatore Mélangeur
Mixer
EG
= Elettrovalvola gruppo
Electr. du groupe
Gruppeelektroventil
ES
= Valvola di espansione
valve d’expansion
Expansionsventil
EV
= Elettrovalvola vapore
GR
Boiler
Caldera
Caldeira
Flow Meter
Contador volum.
Contador volumétrico
Wasserelektroventil
Water electrovelve
Electrovalvula agua
Válvula Elétrica da água
Luftelektroventil Air electrovalve Electrovalvula aire
Válvula Elétrica do ar
Electrovalv. carga
Válvula Elétrica
Mixer Mezclador
Misturador
Group Electrovalve Electrovalvula grupo
Válvula Elétrica grupo
exspansion valve
Válvula de expansión
Válvula de expansão
Electrovanne vapeur Dampfelektroventil Steam valve
Electrovalvula vapor
Válvula Elétrica vapor
= Gruppo erogatore
Groupe de distribution Brühgruppe
Group
Grupo erogador
Grupo distribuidor
IL
= Indicatore livello
Indicateur de niveau
Pegelanzeiger Level indicator
Indicador de nivel
Indicador do nível
LC
= Lampada livello
Lampe niveau
Lampe für Wasserstand Level lamp
Lámpara de nivel
Lâmpada do nível
MA
= Manometro
Manomètre
Manometer
Manometer
Manómetro
Manômetro
MA1 = Manometro Pompa
Manomètre pompe
Manometer Pumpe Manometer pump
Manómetro bomba
Manômetro Bomba
MA2 = Manometro Caldaia
Manomètre chaudière Manometer Kessel Manometer boiler
Manómetro caldera
Manômetro Caldeira
P
= Pressostato
Pressostat mecanique Mech. druckwaechter Mechanic pressure switch
Presostato mecanico
Interrup. Mec. Pressão
PV
= Pompa volumetrica
pompe volumétrique
Volumetrische Pumpe Volumetric pump
Bomba volumétrica
Bomba volumétrica
RA
= Rubinetto Acqua
Robinet eau
Wasserhahn
Water tap
Grifo de agua
Torneira Água
RL
= Rubinetto Carico
Robinet d’arrivée
Auffüllhahn
Inlet water tap
Grifo de carga
Torneira Abastecimento
RV
= Rubinetto Vapore
Robinet vapeur
Dampfhahn
Steam tap
Grifo de vapor
Torneira Vapor
SA
= Scheda autolivello
Fiche autoniveau
Wasserstandkarte
Autolevel board
Ficha de autonivel
Placa auto nível
SC
= Scambiatore di calore
Échangeur de chaleur Wärmaustauscher
Heat-exchanger
Intercambiador de calor Intercambiador de calor
SL
= Sonda Livello
Sonde niveau
Standfühler
Level feeler
Sonda nivel
Placa Nível
SP
= Sensore di pressione
Capteur de pression
Drucksensor
Pressure sensor
Detector de presión
Sensor de pressão
ST
= Sonda temperatura
Sonde Temperature
Temperatur Sonde
Temperature Probe
Sonda de temp.
Sonda temperatura
VA
= Valvola antidepressione Vanne antidépression Unterdruckventil
Antivacuum valve
Válvula antidepresión
Válvula anti depressão
VP
= Pompa a vibrazione
Pompe à vibration
Vibrationspumpe
Vibration pump
Bomba de vibración
Bomba com vibração
VR
= Valvola di ritegno
Valve de retenue
Rückschlagventil
Check-valve
Válvula de retención
Válvula de retenção
VS
= Valvola di sicurezza
Clapet de sûreté
Sicherheitsventil Safety valve
Válvula de seguridad
Válvula de segurança
90
91
RA
RV
RV
MA1
PV
IL
GR
SC
CV
VS
GR
PROGETTO:
ES
CV
VA
EPOCA
VR
CODICE:
RL
SI_EPOCA_E
VERS. E 2 GR.
DENOMINAZIONE:
SC
Viale della Repubblica 40
20010 Villastanza di Parabiago-Mi-Italia
Tel +39 0331 408200
Fax +39 0331 551437
www.rancilio.com [email protected]
CL
SL
SCHEMA
IDRAULICO
MA2
SP
Formato:
Firma:
Data:
A4
U.T.
18/07/07
Diffusione e riproduzione
vietata a termini di legge
senza nostra autorizzazione.
EC
92
RA
RV
RV
MA1
IL
PV
GR
SC
GR
Viale della Repubblica 40
20010 Villastanza di Parabiago-Mi-Italia
Tel +39 0331 408200
Fax +39 0331 551437
www.rancilio.com [email protected]
CL
SL
VS
ES
EPOCA
CODICE:
VR
SI_EPOCA_S
VERS. S 2 GR.
DENOMINAZIONE:
PROGETTO:
SC
VA
SCHEMA
IDRAULICO
RL
MA
P
Formato:
Firma:
Data:
A4
U.T.
17/09/07
Diffusione e riproduzione
vietata a termini di legge
senza nostra autorizzazione.
EC
IT
Proprietà riservata.
E’ vietata la riproduzione totale o parziale del presente manuale senza l’autorizzazione scritta della Rancilio S.P.A.
La ditta RANCILIO si riserva il diritto di apportare in ogni momento le modifiche che riterrà necessarie.
FR
Propriété réservée.
Il est interdit de reproduire totalement ou partiellement ce manuel sans l’autorisation écrite de la Société RANCILIO
S.P.A.
La maison RANCILIO se réserve le droit d’apporter à tout moment les éventuelles modifications qu’elle jugera nécessaires.
DE
Eigentumsrecht Vorbehalt.
Der teilweise oder gesamte Nachdruck dieses Handbuches, ohne schriftliche Genehmigung der Fa. RANCILIO SPA ist
verboten.
Die firma RANCILIO behält sich vor, eventuell notwendige Änderungen jederzeit durchzuführen.
EN
Reserved property.
Partial or total reproduction of this manual is forbidden without written authorisation of RANCILIO S.P.A..
RANCILIO reserves the right to effectuate, in any given moment, any modifications which are considered necessary.
ES
Propriedad reservada.
Prohibida la reproducciòn total o parcial del presente manual sin la autorizaciòn escrita de la RANCILIO S.P.A.
RANCILIO se reserva el derecho de aportar eventuales modificaciones que reputarà necesarias en cualquier momento.
PT
Propriedade riservada.
É proibida a reprodução total ou parcial do presente manual sem a autorização escrita da Rancilio S.P.A.
A fábrica RANCILIO reserva-se o direito de fazer, em qualquer momento, as modificações que julgar necessárias.
RANCILIO MACCHINE PER CAFFÉ
STABILIMENTI E SEDE CENTRALE - 20010 VILLASTANZA DI PARABIAGO - MI (ITALY)
VIALE DELLA REPUBBLICA, 40 - TEL. 0331/408200 - TELEFAX 0331/551437
Cod. 46900142
REV.--
10/2007
">