Husqvarna 326C, 326L, 326LX-Series, 326LDX

DECLARATION OF CONFORMITY

WE Hyundai IT COPR.

Ami-ri Bubal-Eub Ichon-Si Gyeonggi-Do

467-860 KOREA declare under our sole responsibility that the product:

Kind of equipment : LCD TV

Type-Designation : LT26AW001/LT32DW002/LT37DW000/LT42DW000/LT46DW000 to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

Safety : EN60065:2001 / IEC60065 : 2001

EMC : EN 55013 : 2001 + A1: 2003

EN 55022 : 1998 + A1:2000 + A2:2003

EN 55024 : 1998 + A1:2001 + A2:2003

EN 55020 : 2002 + A1:2003

EN 61000-3-2:2000 , EN 61000-3-3:1995+A1:2001 following the provisions of the Low Voltage Directive 73/23/EEC,

93/68/EEC and the EMC Directive 89/336/EEC.

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

KOREA /May 8 , 2006 BYUNG SUHIN, AHN

(Place and date of issue) ( Name and signature of authorized person)

Table of Contents

General Information

Important Tip/Image Sticking Precaution ...............................1

Safety Precaution .................................................................2

Contents of the Package .......................................................6

Products Sold Separately ......................................................6

Parts Names and Functions ..................................................7

Remote Control ...................................................................11

Connections

Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ...............13

Connecting Antenna input Connection to

External Equipments ...........................................................13

Before Connecting the Video/Audio Connections to

External Devices... .............................................................14

How to Connect a DTV Receiver or DVD Player ....................14

How to Connect a VCR, Cable Receiver, Camcoder,

Game Player .......................................................................15

How to Connect to a PC ......................................................15

Scart Connection to the External Input/Output .....................16

HDMI Connection (For HDMI model only) ............................17

How to Set the OSD Screen ................................................18

Picture Setup

How to Select the Picture Mode ..........................................19

How to Set the Desired Picture ...........................................19

How to Set the Desired Picture in PC, DVI,

HDMI Input Modes ..............................................................20

How to Set Image Adjust in PC Mode ..................................20

How to Select a Color Tone .................................................21

How to Set the Display Size ................................................21

How to Set Noise Reduction(NR) .........................................22

How to Set Film Mode .........................................................22

Sound Setup

How to Select the Audio Mode ............................................23

How to Adjust the Desired Audio Mode ..............................23

How to Select Auto Volume..................................................24

How to Select Sound Mode ..................................................24

How to Select Surround ......................................................25

Channel Setup

How to Select Auto Store ...................................................26

How to Select Manual Store ................................................26

How to Set the Program Edit(Add/Delete,Sort,Name) ...........27

How to Fine Tune ................................................................28

PIP Setup

How to Set PIP ....................................................................28

Function Setup

How to Reset ......................................................................30

How to Set Clock, Sleep Time, ON/OFF Time .......................30

Choosing the your Language ...............................................31

How to Set OSD Tone .........................................................32

How to Set Teletext in ATV ..................................................32

Selecting Teletext Display Options in ATV Mode ..................33

How to Set Key-Lock ..........................................................33

DTV Setup

How to Search Automatically ..............................................34

How to Search Manually .....................................................34

How to Check Channel State ...............................................35

How to Use the Guide (EPG : Electronic Program Guide) ......36

How to Select Channel List .................................................37

How to Set Favorite Channel ...............................................37

How to Use Channel List Mode ...........................................38

How to Lock Channel ..........................................................38

How to Set the Channel Order .............................................39

How to Delete Channel .......................................................39

How to Add Channel ...........................................................40

How to Factory Set .............................................................40

How to Day Light Saving Time(Summer Time) ...................41

How to TV/RADIO switching ................................................41

How to Subtitle / Audio .......................................................42

How to Select Channel / Information ...................................42

How to Set Teletext in DTV .................................................43

Appendix

Troubleshooting ..................................................................44

Product Specifications ........................................................46

1

General Information

Image Sticking Precaution

When watching a still Image within motion pictures and

Wide/Panorama/Zoom/ /4:3 screen/14:9

Wide,Panorama,Zoom,4:3,14:9, screen

Box still image

1. Note :

- When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retentions on the edges when watching for a long time

- This phenomenon happens also to products from other manufacturers. Please avoid watching a still image for a long time.

- If you watch a still image for a long time, this may damage your TV.

* This matter does not come under the warranty.


Safety Precaution

The contents of this section are provided for the safety of users and their property.

Please read the instructions carefully before using.

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA

No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Example of Grounding According to National Electrical Code

Instruction

Do not connect multiple electrical appliances to a single outlet.

- It may cause a fire due to overheating from the outlet.

Make sure to remove the speakers before moving the TV with speakers mounted on it.

- When the speakers are detached from the unit while carrying it, this may cause damage to the unit or personal injury.

Do not use or store a flammable spray or inflammable things near the

TV.

- They may cause explosion or fire.

Do not install the TV in a bookshelf, closet, or a place with poor air circulation.

- Fire may be caused due to the rise of internal temperature.

Any necessary action such as making the antenna cable loop at the entrance of the building should be taken to prevent rainwater on the outdoor antenna cable from possibly running indoor.

- If raindrop gets into the TV, it may cause a fire or an electric shock.

2

3



......................................................................................Continued from previous page



If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth.

- It may cause a fire or an electric shock.

Do not use a damaged power cord or plug, or loose outlet.

- It may cause electric shock or fire.

Do not put a water bowl, vase, candle, bug repellant smoke, cigarette, plants, or heavy thing on the TV.

- It may cause electric shock or fire and also heavy things may cause injury when they fall.

Firmly plug in the power cord so that it does not pull out.

- An unstable connection may cause fire.

Do not install in a place where there is oil, smoke, excessive humidity, or where water may be sprinkled on it.

- This may cause electric shock or fire.

Do not install on an unstable place or small support.

- This may cause the TV to fall, resulting in serious injury especially to children.

Never attempt to open, fix, or modify your TV.

- When there is a need for fixing, call a service center. Fire or electric shock may be caused.

When the TV produces abnormal noise, burning smell, or smoke, unplug the TV immediately and call a service center.

- Electric shock or fire may be caused.

Do not put a metallic object like chopstick, wire, or puncher or inflammables like paper or a match in a vent, headphone jack, or AV jacks of the TV.

- Electric shock or fire may be caused.


Please avoid touching the panel at the rear of

TV as it is producing high temperature.

- Direct contact with the hot surface may cause physical burns.

Do not place any heat sources such as radiators and heat registers, etc. near the TV.

- It may cause a fire.

Do not place toys and cookies, etc. on the TV, which may attract children’s attention.

- This may cause the TV to fall, resulting in serious injury.

Do not block ventilating slits with a table cloth.

- Blocking the ventilation slits may produce internal heat increase, resulting in a fire.

Do not allow children to climb or play on the

TV.

- This may cause the TV to fall resulting in serious injury.

Unplug when you do not use your TV for a long time.

- If dust is stacked on the TV, electric shock or fire may be caused from heat, fire, or deterioration of insulation.

When cleaning the TV, make sure to disconnect the power plug and use a dry, soft cloth for a cleanup.

- Please avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito spray, air freshener, lubricant or synthetic detergent.

Never touch the power plug or outlet with wet hands.

- This may cause electric shock.

When moving the TV, two or more people are advised to carry it.

- This may cause damage to the unit or personal injury.

4



......................................................................................Continued from previous page



Unplug the product during lightning or thunderstorms and never touch the antenna cable.

- It may cause a fire or an electric shock.

5

Do not install the product on the floor.

- This may cause the TV to fall resulting in serious injury.

When replacing batteries, make sure to match the batteries to the (+) and (-) marks in the battery compartment.

- Mismatching of polarities may result in internal damage to batteries, fire due to leakage or contamination.

Keep the remote control batteries out of sight and out reach of children.

- If your child swallows a battery, see your doctor immediately.

Always use the standard batteries and avoid using old batteries together with new ones.

- Otherwise it may result in internal damage to batteries, fire due to leakage or contamination.

In the event of damaging or dropping the product, switch off the power and remove the plug.

- Using a damaged product may cause an electric shock or a fire.

- Contact your local service center.

Consult a service center or customer service for inside cleaning about once a year.

- When dust is piled inside the TV for a long time, fire or malfunction may be caused.

Before moving the product, ensure to switch off the power and unplug all the electrical cords and the external connection cords such as an antenna cable and other source connections, etc.

- Electrical cords may be damaged, resulting in a fire or an electrical shock.

Ensure the power cord doesn’t trail across any hot objects like a heater.

- This may cause a fire or an electric shock.


Contents of the Package

When opening the package, please ensure to check the following accessories.

Antenna Cable

(coaxial cable)

Power Cord Remote Control &

2 batteries (1.5V AAA)

User's Guide

Products Sold Separately

If you want to purchase the following accessories, consult a service center, electronics shops, or parts seller.

Component(Y, Pb, Pr) cable Composite(Video & Audio) cable DVI PC video(digital) cable

S-video cable PC signal cable Scart cable

HDMI cable Audio Cable (DVI/DVD) Audio Cable (PC)

Wall mounting frame Wall mounting frame

6


Parts Names and Functions

Front View

- E260D/E320D/E370D/E420D/E460D MODEL

7

* This product image may be a bit different from the actual product.

Volume buttons

Use these buttons to adjust sound levels.

These buttons also serve as the cursors of

Select/Adjust in Menu mode.

Channel buttons

Use these buttons to change channels. These buttons also serve as the cursors of Down and

Up buttons in Menu mode.

Select button

Use this button to select each item from the menu mode.

Menu button

Use this button to display or exit from the menu mode.

Source button

Use this button to switch among inputs connected to the TV.

Power button

Use this button to turn on or off the TV.

Remote sensor and power LED.

- Point the remote control toward LED.

- It displays standby or operation status.

- Power Indicator Status -

Indicator Status

Red

Green

Standby

Power on

Power switch (For 37”/42”/46” model only)

Use this switch to turn on/off power.

Rear View




Power switch (For 26”/32” model only)

Power (AC) input terminal

HDMI input terminal

D-SUB input terminal

D-SUB Audio input terminal

Video(CVBS) output terminal

Audio(CVBS) output terminal

Audio(CVBS/S-Video) input terminal

S-Video input terminal

* Extend an RS-232 input for ATV communication

Component Video input terminal

Component Audio input terminal

Video(CVBS) input terminal

* Upgrade terminal

Full Scart input terminal

Antenna input terminal

Digital Audio output terminal for coaxial cable

Half Scart input terminal

SPDIF Optical audio output terminal

* Extend an RS-232 input for DTV communication

Handler (only for 26 inch)

✓ * * * - it's for technical service do not use at home.

8


Front View


9


Volume buttons

Use these buttons to adjust sound levels.

These buttons also serve as the cursors of

Select/Adjust in Menu mode.

Channel buttons

Use these buttons to change channels. These buttons also serve as the cursors of Down and

Up buttons in Menu mode.

Select button

Use this button to select each item from the menu mode.

Menu button

Use this button to display or exit from the menu mode.

Source button

Use this button to switch among inputs connected to the TV.

Power button

Use this button to turn on or off the TV.

Remote sensor and power LED.

- Point the remote control toward LED.

- It displays standby or operation status.

- Power Indicator Status -

Indicator

Red

Green

Status

Standby

Power on

Power switch (For 37”/42”/46” model only)

Use this switch to turn on/off power.

Rear View




Power switch (For 26”/32” model only)

Power (AC) input terminal

HDMI input terminal

D-SUB input terminal

D-SUB Audio input terminal

Video(CVBS) output terminal

Audio(CVBS) output terminal

Audio(CVBS/S-Video) input terminal

S-Video input terminal

* Extend an RS-232 input for ATV communication

Component Video input terminal

Component Audio input terminal

Video(CVBS) input terminal

* Upgrade terminal

Full Scart input terminal

Antenna input terminal

Digital Audio output terminal for coaxial cable

Half Scart input terminal

SPDIF Optical audio output terminal

* Extend an RS-232 input for DTV communication

Handler (only for 26 inch)

✓ * * * - it's for technical service do not use at home.

10


Remote Control

SOURCE

SLEEP INFO

CH-LIST GUIDE TV/RADIO S.MODE

PIP

P-SOURCE

SUB-PR

0

PICTURE SOUND

VOL

MUTE A/D

PR

TTX/MIX INDEX LIST/FLOF STORE

STAND ROT

TV VCR DVD SAT SET

1. POWER/STANDBY

2. POWER LED

3. SOURCE

Use this button to select External Input.

4. STILL

5. INFOMATION

Use this button to display resolution or various programs.

6. S-MODE

7. PIP FUNCTIONS

- PIP : Use this button for PIP On/Off.

- PIP SOURCE : Use this button to select the input source of sub-picture.

8. PIP CHANNEL SELECTION

9. PREVIOUS PROGRAM

10. EXIT

11. MENU SELECTION

Use this button to select menu items.

12. LEFT/RIGHT MOVE/ADJUST

- Use these buttons to move between menu items or adjust each item.

- Use UP/DOWN buttons to select Analog TV channels.

13. SOUND MODE

Use this button to call the OSD on the screen.

14. PROGRAM SELECTION

15. A/D TV

Use this button to switch the input source from analog to digital.

16. AUTO SWIVEL ADJUST (Option)

17. Use this buttons to use other manufacturer’s DVD or

VCR.

18. MUTE

19. VOLUME

20. PICTURE MODE

21. MENU

Use this button to call the OSD on the screen.

22. PROGRAM EDIT

23. NUMERIC KEYS

24. ASPECT RATIO

Use this button to change the picture size.

25. Other external device selection(Option)

11


Teletext & Fastext Function

(See pages 36 for more details.)


PICTURE

0

PIP

P-SOURCE

SUB-PR

SOUND

VOL

MUTE A/D

PR


1. CH. LIST

To watch the channel list for Digital TV. Press key to confirm or press EXIT to return to previous channels.

2. GUIDE (EPG-Electronic Program Guide)

To watch the program information. Press once more to return to normal mode.

3. TV-RADIO

To switch between the TV channel and radio channel for

Digital TV.

4. S.MODE

To adjust the subtitle and audio condition/status of the current channel for Digital TV

5. WHITE rubber

DTV : To add a new channel to the Channel List menu.

6. ORANGE rubber

DTV : To see variant channel lists for user’s convenience in the

Channel List menu.

7. RED rubber

- DTV : To setup favorite channel lists in the Channel List menu.

- ATV : To delete a channel in the Program Edit menu.

8. GREEN rubber

- DTV : To lock favorite channel lists in the channel list menu.

- ATV : To sort channels in the Program Edit menu.

9. YELLOW rubber

- DTV : To move favorite channel lists in the channel list menu.

- ATV : To edit channel names in the Program Edit menu.

10. BLUE rubber

DTV : To delete a channel from the channel List menu. To show extended program information in the EPG menu.

11. TTX/MIX

To see Teletext Service Data for Analog TV and Digital TV.

How to Insert Batteries in the Remote Controller

* Battery type :1.5V/AAA

1 2 3

Press and hold part and push to open cover.

Insert batteries with proper polarities of + and -.

Use the remote control with cover closed.

12

Connections

Connecting Indoor/Outdoor TV Antenna(UHF/VHF)

- Antenna or Cable service without cable box connections

- For on optimum picture quality, adjust the direction of antenna if needed.

VHF Antenna

UHF Antenna

Antenna cable

✓

When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.

✓

If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.

Connecting Antenna Input Connection to External Equipments

1. Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.

2. Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on your TV.

VCR/Cable Receiver

Antenna cable

13

Connections

Before Connecting the Video/Audio Connections to External Devices...

Please make sure to read the following instruction to enjoy the best picture quality.

Best picture quality is displayed in the following order.

HDMI

HDMI,

DVI-I, D-Sub

COMPONENT FULL SCART S-VIDEO COMPOSITE HALF SCAT

The superior picture quality starts from the far left side.

How to Connect a DTV Receiver or DVD Player

1. Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the input terminals (Y, Pb, Pr) of DTV/DVD (576i/576p/720p/1080i) on the rear of TV.

(Connect the jacks to terminals in the same color.)

2. Connect the Audio cable between Audio output terminals of DTV receiver or DVD player and Audio input terminal for DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)

DTV receiver

/ DVD Player

Audio cable

Video (Y, Pb, Pr) cable

✓

Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr according to the type of DVD player models.

✓

If your DVD player or Set Top Box supports HDMI/DVI or D-SUB, see Connecting to a PC (page 13) for connection. You can enjoy more clearer picture quality.

14

Connections

How to Connect a VCR, Cable Receiver, Camcoder, Game Player

1. Connect the Video cable or S-Video cable between Video/S-Video output terminals of VCR or Cable receiver and

Video/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)

2. Connect the Audio cable (Left: white, Right: red) between Audio output terminals of VCR or cable receiver and

Audio input terminal of TV. (Connect the jacks to terminals in the same color.)

Game Player

Camcorder

Video

/Cable receiver

Audio cable

Video cable or S-Video Cable

✓ To enjoy a better picture quality, use the S-Video cable rather than the composite cable.

How to Connect to a PC

1. Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of TV.

2. Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV.

(Connect the jacks to terminals in the same color.)

Audio Cable

D-SUB cable

15

✓ If you use DVI/HDMI connection, you can enjoy better picture quality.

✓ This product supports Plug-and-Play function.

✓ We recommend the above method if the DVD player or set top box supports DTV signal with DVI or HDMI cable for better picture quality.

✓ If you input an unsupported resolution in PC or DVI/HDMI mode, the screen won’t be displayed properly.

✓ DTV Timing is not guaranteed on the PC D-Sub mode

Connections

Resolutions Supported in PC

Model

Resolution

640 x 350

640 x 480

720 x 400

800 x 600

Horizontal frequency

31.47

-

37.86

31.50

-

-

31.47

37.88

46.88

48.08

26” / 32” / 37” / 42” / 46

Vertical frequency

70.00

-

72.80

75.00

-

-

70.08

60.32

75.00

72.19

832 x 624

1024 x 768

1280 x 1024

1366 x 768

49.73

48.36

56.48

60.02

63.98

61.27

74.55

60.00

70.07

75.03

60.02

74.99

Scart Connection to the External Input/Output

If you have a second VCR and wish to copy cassettes tape. Connect the source VCR to “F Scart” and the target VCR to “H Scart” so that you can redirect the signal from “F Scart” to “H Scart”.

* “F Scart” sends the TV broadcast signal received through an antenna to a set-top box and receives the descrambled signal back, which allows you to view TV broadcasts in AV Mode.

* “H Scart” you are capable to record live TV broadcasts on the TV screen. (Please make sure that your TV is “ON”.)

VCR

SET TOP BOX

VIDEO(CVBS)

+ Audio(L/R)

TV OUT

TV IN

F SCART

DVD

Video Game Device

Video Disc Player

Satellite Receiver

- F Scart Input : RGB, CVBS - F Scart Output : CVBS

- H Scart Input : CVBS - H Scart Output : CVBS

✓ When switching voltage comes into the Scart-Pin 8 during viewing a TV program, the current mode will be switched to Scart mode.

16

Connections

HDMI Connection

(For HDMI model only)

HDMI*

1

(High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information.

To the HDMI™ input terminal, you can connect an EIA/CEA-861/861*

2

compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI output terminal.

HDMI

DVD Player

Set Top Box

If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the

HDMI terminal.

HDMI Cable

Compatible VIDEO Signal

Model

1080i

576p

720p

Resolution

1,920 x 1,080i

720 x 576p

640 x 576p

1280 x 720p

Vertical frequency

50

50

50

50

- This input terminal is not intended for use with computers.

Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz

➥

Notes :

• This HDMI connector is Type A.

• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or

VIDEO input terminal on the TV so you can enjoy an analog signal.

• The DIGITAL IN terminal can only be used with 1080i, 720p or 576p picture signals. Set the Digital Set -Top -Box

DIGITAL OUT terminal Output setting to 1080i, 720p or 576p. For detailed information, refer to the Digital Set -Top

- Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have a

DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal.

17

*1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

*2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

How to Set the OSD Screen

SOURCE

SLEEP INFO


PIP

P-SOURCE

SUB-PR

0

ANALOG TV - Terrestrial broadcasting for supporting analog PAL/SECAM system.

H-SCART - Basically the same as Full SCART in function but not supporting RGB Video signals.

Connections

F-SCART - For supporting composite video and RGB video signals. SCART connectors is used with many

European video equipments.

AV : For supporting the color shade(chrominance) and brightness(luminance) information into one video signal.

S-VIDEO : For supporting better resolution than composite video, which carries the signals together.

Component : For supporting greater color accuracy than composite video or S-VIDEO by splitting chrominance into one video signal.

HDMI : High Definition Multi media Interface that supports both video and audio information.

PC : For supporting Personal Computer connection.

iDTV : Digital Terrestrial broadcasting for supporting DVB-T

System.

Different OSD Menu

You can confirm OSD menu of three different types.

PICTURE SOUND

VOL

MUTE A/D

PR


✓

In case of the source in ATV

✓

In case of the source in iDTV

18

Picture Setup

How to Select the Picture Mode

Users can automatically adjust the picture mode according to the input mode.

1

2

3

Press MENU button.

Menu items appear on the screen.

Press button to select “Picture” Icon.

“PICTURE MODE” is highlighted.

Press / or buttons to select “Picture mode”.

4

5

The menu changes in the following order.

CUSTOM

➛ DYNAMIC ➛ STANDARD ➛ MOVIE ➛ MILD

Press EXIT button to TV viewing or press MENU button to return to the previous menu.

♦ CUSTOM : When the user wants to set the values directly.

♦ DYNAMIC : Clear display

♦ STANDARD : Most video contents are appropriate to this mode.

♦ MOVIE : When watching a movie

♦ MILD : Soft display.

✓ In the custom’s mode, the users can adjust their desired brightness, contrast,

colour, Tint, sharpness and backlight.

How to Set the Desired Picture

Users can manually adjust their desired picture

4

5

2

3

1

Press MENU button.




Press / buttons to move to “Custom” and press / or buttons to select CUSTOM .

Select required option by pressing the / or button, then Press / button to adjust.


♦ BRIGHTNESS : Adjust the brightness of the entire picture.

♦ CONTRAST : Adjust the brightness and darkness of the object and backgrounds.

♦ COLOUR : Adjust colors into deeper or lighter colors.(not operational in pc mode)

♦ TINT : Adjust colors naturally.(not operational in pc iDTV and component mode)

♦ SHARPNESS : Adjust the clarity of object outlines.(not operational in pc iDTV and component mode)

♦ PHASE : To remove the picture shaking.

To eliminate the Shake of picture(operational in component and iDTV

Mode)

♦ BACKLIGHT : Adjust the brighten or darken of the screen.

19

Picture Setup

How to Set the Desired Picture in PC, HDMI Input Modes

Users can adjust Color as users want.

1

2

3

4

5

6

7

Press MENU button.



picture mode is highlighted.

Press / or buttons to select to ”picture mode”.

The menu changes in the following order.

➛ CUSTOM ➛ HIGH ➛ MIDDLE ➛ LOW

After selecting Color Tone, then the menu changes in the following order.

➛ CUSTOM ➛ COOL2 ➛ COOL1 ➛ NORMAL ➛ WARM1 ➛ WARM2

If you choose “ CUSTOM” in “COLOR TONE” you can adjust R.G.B.


♦ CUSTOM : When the user wants to set the degree of RGB directly.

♦ COOL : For cool colors with bluish tone.

♦ NORMAL : For a general Color Tone.

♦ WARM : For warm colors with reddish tone.

How to Set Image Adjust in PC Mode

1

2

3

4

5

6

7

Press MENU button.




Press / buttons to move to “PC” and Press / or select to “pc”

“AUTO ADJUST” is high lighted.

Press button to execute the “AUTO ADJUST”

Select required option by pressing the / or buttons, then press

/ button to adjust

Press EXIT button to TV viewing or press NEW button to return to the previous menu

♦ Auto ADJUST : Horizontal/vertical positions are automatically adjusted.

♦ PHASE : To eliminate the shake of the picture.

♦ H-POSITION : To adjust the horizontal position of the picture.

♦ V-POSITION : To adjust the vertical position of the picture.

♦ FREQUENCY : To eliminate the shake of picture.

20

Picture Setup

How to Select a Color Tone

Users can adjust Color as users want.

1

2

3

4

5

6

Press MENU button.




Press / buttons to move to “COLOR TONE”.

Press / or buttons to select “COLOR TONE”.

Press / buttons, then the menu changes in the following order.

➛ COOL2 ➛ COOL1 ➛NORMAL ➛ WARM1 ➛ WARM2


♦ COOL : For cool colors with bluish tone.

♦ NORMAL : For a general Color Tone.

♦ WARM : For warm colors with reddish tone.

21

How to Set the Display Size

Users can adjust the display scale as they want

1

2

3

4

5

Press MENU button.




Press / buttons to move to “SIZE”.

Press / or buttons and press / then the mode change in the following order.

COMPONENT Input :

➛ WIDE ➛ PANORAMA ➛ ZOOM ➛ 4:3 ➛ 14:9

PC/HDMI inputs :

➛ WIDE ➛ 4:3 ➛

Under other inputs :

➛ AUTOSIZE ➛ WIDE ➛ PANORAMA ➛ ZOOM

➛ 4:3 ➛ 14:9 ➛


♦ AUTO SIZE - Screen size adjust automatically by screen signal.

♦ WIDE - General broadcast picture is adjusted to 16:9.

♦ PANORAMA - Picture enlarged to 16:9 format, letter box format.

♦ ZOOM - Zoom in 16:9 in vertical direction

♦ 4:3 - 4:3 general picture size

♦ 14:9 - 14:9 picture size

Picture Setup

How to Set Noise Reduction(NR)

User can eliminate noises on the screen in Video mode

1

2

5

6

3

4

Press MENU button.




Press / buttons to move to “NR”.

Press / buttons to select to “NR”.

Press

/

or buttons to set ON/OFF .


How to Set Film Mode

Set Film Mode to receive a crisp, clear picture without flickering.

1

2

5

6

3

4

Press MENU button.




Press / buttons to move to “FILM MODE”.

Press / or buttons to select to “FILM MODE”.

Press

/ or

buttons to set ON/OFF .


✓ During the reproduction of a DVD or VCR it can come to a distortion of the picture

edges. Usually it happens due to a low quality film edition. In case you experience this, please switch in the menu the function "film mode" to "ON".

✓ You may experience tearing effects on the flowing texts during general

broadcasting. If you come across this symptom, select ‘OFF’ in the Film Mode.

22

Sound Setup

How to Select the Audio Mode

Users can adjust sound mode automatically as they want.

1

2

3

4

5

Press MENU button.


Press / buttons to move to “SOUND” icon.

Press button to select “SOUND” Icon.

“MODE” is highlighted.

Press / or buttons, to select to “SOUND MODE” then the menu changes in the following order.

CUSTOM

➛ STANDARD ➛ MUSIC ➛ MOVIE ➛ SPEECH ➛


♦ CUSTOM : When the user wants to set the values directly.

♦ STANDARD : For the general sound. Most audio contents are appropriate to this mode.

♦ MUSIC : For enjoying original sound.

♦ MOVIE : Grandiose sound.

♦ SPEECH : Clear sound.

➥ How To Directly Select Sound : Press Sound button.

Users can select custom CUSTOM

➛ STANDARD ➛ MUSIC ➛ MOVIE ➛ NEWS in order.

How to Adjust the Desired Audio Mode

Users can adjust sound mode automatically as they want.

6

7

1

2

3

4

5

Press MENU button.



Press button to select “SOUND” icon.


Press / buttons to move to “Balance or Equalizer”.

Press buttons to select Balance or Equalizer .

Balance or Equalizer menu appears.

Select required option by pressing the / buttons, then Press / buttons to adjust.

Press EXIT button to TV viewing or press MENU button to return to the previous menu

♦ BALANCE : Adjusts the balance of left and right speakers.

♦ EQUALIZER : Adjusts the audio output signal in the desired band.

23

Sound Setup

How to Select Auto Volume

This function will automatically give a similar volume size to each channel.

1

2

3

6

7

4

5

Press MENU button.



Press button to select “SOUND” icon.


Press / buttons to move to “AUTO VOLUME ” .

Press / or buttons to select ON/OFF .

Press / or buttons to set to ON/OFF .

Press EXIT button to TV viewing or press MENU button to return to the previous menu

How to Select Sound Mode

Depending on the particular program being broadcast, you can select stereo or mono.

1

2

3

4

5

6

Press MENU button.




Press / buttons to move to “SOUND MODE”.

Press

/

or buttons to select to SOUND MODE .

Press / buttons to select to MONO

STEREO .

Press exit button to TV viewing or press MENU button to return to the previous menu

➥ How To Directly Select S. MODE : Press S. MODE button.

To select “MONO” or “STEREO”.

♦ Choose “STEREO” for channels that are broadcasting in STEREO.

♦ Choose “MONO” for channels that are broadcasting in MONO, or if you are having difficultly receiving a STEREO signal.

✓ If the signal reception conditions deteriorate, setting to Mono will make sound

conditions better.

✓ If you select Mono L or R you could listen one sound signal by both speakers.

24

Sound Setup

How to Select Surround

This function processes multi-channel surround sound through two speakers.

1

2

3

4

5

6

Press MENU button.




Press / buttons to move to “SURROUND”.

Press

/

or

buttons to select to SURROUND .

Press /

or

buttons to set to ON/OFF


✓ You can enjoy the most suitable surround effect in Stereo-mode.

25

Channel Setup

How to Select Auto Store

Auto store enables to search/store channels of countries where the user is located automatically.

1

2

3

6

7

4

5

8

9

Press MENU button.


Press / buttons to move to “CHANNEL” icon.

Press button to select “CHANNEL” Icon.

“COUNTRY” is highlighted.

Press / or buttons to select “COUNTRY”

Press / or buttons to set YOUR COUNTRY .

Press / buttons to move to “AUTO STORE”.

Press / or buttons to select AUTO STORE .

Auto store menu appears, and “START” is highlighted.

Press / buttons to select “START” or “STOP”, then Press to store.


How to Select Manual Store

Manual store enables to searching channels which the user want manually.

1

4

5

6

7

2

3

8

Press MENU button.


Press / Buttons to move to “CHANNEL” icon.

Press button to select “CHANNEL” Icon.


Press / Buttons to move to “MANUAL STORE”.

Press / or button to select “MANUAL STORE”.

Manual program menu appears, then “PROG.” is highlighted.

Press / buttons to select program No.

Select required option by pressing the / button, then Press / or

/ buttons to set or adjust.

To store the setting, press / buttons, move to “Store” and press button to store and finish.

26

Channel Setup

How to Set the Program Edit(Add/Delete, Sort, Name)

Program edit enables users to edit the searched programs.

P r o g .

P 2

P 3

P 4

P 5

P 6

A d d / D e l e t e

E r a s e d

E r a s e d

E r a s e d

E r a s e d

E r a s e d

C h a n n e l N a m e

– – – – – – – –

– – – – – – – –

– – – – – – – –

– – – – – – – –

– – – – – – – –

P r o g . C h a n n e l N a m e

– – – – – – – –

1

4

5

2

3

6

Press MENU button.


Press / Buttons to move to “CHANNEL” icon.

Press buttons to select “CHANNEL” Icon.


Press / Buttons to move to “add/delete, sort,name”.

Press button to select “add/delete”.

The program table appears on the screen. One program table contains five programs.

Press / Buttons to move the program list, and press / buttons to move the menu list select “added” or “Erased”

☞

Sorting the Stored Channels

a. Place to buttons to select and / buttons to choose the swapping PR number.

b. To store the setting, press / or buttons.

☞

Assigning Names to Channel press

button to select and / Buttons to set to “NAME” a. Place the cursor on NAME and Select a letter (A~Z), a number (0~9) or blank space. b. To store the setting, press the button once again.

7


P r o g . C h a n n e l

P 2 – – –

P 3

P 4

– – –

– – –

P 5

P 6

– – –

– – –

N a m e

5 G

*

– –

– – – – –

– – – – –

– – – – –

– – – – –

27

Channel/PIP Setup

How to fine tune

if the reception is clear, you do not have to fine tune, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

1

2

3

4

5

6

Press Menu button.


Press button to select "channel"icon

"country"is highlighted.

Press / buttons to move to "fine tune".

Press / or buttons to select to "fine tune".

Press / or / buttons to adjust "to fine tune".


How to Set PIP

This is to set PIP(Picture In Picture).

You can watch two programs or source at the same time.

<PIP>

1

2

3

Press Menu button.


Press / buttons to move to “PIP” icon.

Press button to select “PIP”.

“PIP” is highlighted.

4

Press / or buttons to select “PIP”.

New Menu items appear, then “OFF” is highlighted.

5

Press / or buttons to select to “ON/OFF”.

➥

How to Directly Turn PIP FUNCTION ON/OFF : Press PIP button.

After setting this, go to step 6 to set the SOURCE.

6

7

Press / buttons to move to “INPUT SOURCE” and Press / or buttons

Press / button, then source changes.

➟ see the refer supported PIP table.

➥ How To Directly Change Sub Source : Press SOURCE button.

In case of PIP mode, go to step 8 if you need to set the “SIZE” of Sub picture.

8

9

Press / buttons to move to “Size” and Press / or button

Press / button, then mode will changes in order below.

➛ SMALL ➛ LARGE ➛

28

PIP Setup

In case of PIP mode, go to step 10 if you need to set the “Position” of Sub picture.

10

11

Press / buttons to move to “Positon” and Press / or

Press / button, then the mode will changes the following order.

➛ RIGHT BOTTOM ➛ RIGHT TOP ➛ LEFT TOP ➛ LEFT BOTTOM ➛ button

In case of PIP mode, go to step 12 if you need to set the “SWAP” of Main and sub pictures.

12

Press / buttons to move to “Swap” and Press button

In case of PIP mode, go to step 13 if you need to set the “Sound Select” of Main and sound

13

14

Press / buttons to move to “Sound select” and / or button

Press / button, then source changes.

➛ MAIN ➛ SUB ➛

Supported PIP Table

Main

Sub

PC

HDMI

COMPONENT

AV

S-Video

FSCRT

HSCRT

Analog TV iDTV

O

O

O

O

O

X

X

X

PC

X

O

O

X

O

O

X

O

HDMI COMPONENT S-Video

X

X

X

X

O

O

X

O

O

O

X

X

O

X

O

O

X

X

X

O

AV

PIP : O

→ Supported, X → Not Supported

FSCRT HSCRT Analog TV iDTV

O O O O

X

O O O O

X

O O O O

X

X X X X

O

X X X X

O

X X X X

O

X X X X

O

O X X X

X

O O O O

X

29

How to Reset

Function Setup

1

2

3

4

5

Press MENU button.


Press button to select “Set up” Icon.

“Reset” is highlighted.

Press / or buttons to select to “RESET”.

Press buttons to choose to RESET .


✓

When you select “Reset” user setting value will initialize except channel value.

How to Set Clock, Sleep Time, ON/OFF Time

1

2

3

4

5

Press Menu button.


Press button to select “SET-UP” Icon.

“RESET” is highlighted.

Press / buttons to move to “TIME”.

Press / or buttons to select “TIME”.

Time menu appears, then “CLOCK” is highlighted.

Press / buttons to move between Hour, Minute and Press / buttons to set Hour, Minute.

✓ When the power supply(AC main power) is cut off, the clock is reset to the value

before the Time set.

30

Function Setup

Go to step 6 if you need to set the “ON or OFF TIME”.

6

7

8

Press / buttons to move to “ON or OFF TIME”.

Press

/

or

buttons to select “ON or OFF TIME”.

Press / buttons to move between Hour, Minute and on/off and Press

/ buttons to set Hour, Minute and on/off go to step 9 if you need to set the “ON TIME CHAMEL” or “ON TIME VOLUM”

9

10

Press / buttons to move to on time channel or Volume.

Press / buttons to adjust on time channel or Volume.

go to step 11 if you need to set the “SOURCE”

11

12

13

Press / buttons to move to “SOURCE”

Press /

or

buttons to select to “SOURCE”

Press /

or

buttons to set to “SOURCE”

Choosing the Your Languages

Using the TV for the first time, users must select their preferred language preference in order to display main menus and sub menus, etc.

1

2

3

4

Press MENU button.


Press button to select “SET UP” Icon.


Press / button to move to Language and press / or button to select to Language .

➛ ENGLISH ➛ FRANÇAIS➛ DEUTSCHLAND ➛ ITALIANO ➛ ESPAÑOL

➛ NEDERLAND ➛ SUOMI ➛


31

How to set osd tone

1

2

3

4

5

Press MENU button.


Press button to select "set up"icon


Press / buttons to move to "osd tone"

Press / or buttons to select to "osd tone".

Press / or buttons to set to "on/off".

Function Setup

How to Set Teletext in ATV

You can use Teletext service in analog TV mode.

If it is included in you receiving channels.

1

2

Press “TTX/MIX” button and wait.

If the “*” sign pops up left upside of the screen as the following picture, wait until the teletext service menu is displayed “*” means it provides teletext service. So wait a moment.

Select your interesting item with numeric keys.

32

Function Setup

Selecting Teletext Display Options in ATV Mode

When users have displayed a teletext page, they can have various options to suit their requirements.

DISPLAY(ACTION)

• Hidden Text (Answers to Quiz Games, for Example)

• The Normal Screen

• A Second Page

• Normal screen

• Double-Size Letters in the :

- Upper half of the screen

- Lower half of the screen

• Normal Screen :

Stops the automatic page change which will occur if teletext page consists of 2 or more sub pages.

The stop symbol is displayed at the top left-hand corner of the screen.

• FLOF

• TOP

INDEX (Full Level One Facility)

INFO. (Table of Page)

• To Store Page

• Return to List or FLOF mode

BUTTON

REVEAL

REVEAL AGAIN

SUB PAGE

SUB PAGE AGAIN

SIZE

- ONCE

- TWICE

- THREE TIMES

HOLD

HOLD AGAIN

INDEX

STORE

LIST/FLOF

How to Set Key-Lock

User can lock the control buttons on the front bottom of the TV.

1

2

3

6

7

4

5

Press MENU button.


Press / button to move to “SET UP” Icon.

Press button to select “SET UP” Icon.

“RESET” is highlighted

Press / buttons to move to “KEY LOCK”.

Press / or buttons to select to “KEY LOCK”.

Press

/ or

buttons to set to ON/OFF .


33

DTV Channel Setup

How to Search Automatically

This function can be used to get the latest program data while the receiver is still in use.

Through this function, the receiver searches for all the available program and saves them in the memory.

1

2

3

4

5

Press MENU button.


Press / Buttons to move to “DTV CHANNEL” icon.

Press button to select “DTV CHANNEL” Icon.

“AUTO SCAN” is highlighted.

Press buttons to select AUTO SCAN”

Automatic Scan menu appears, then auto scan activates.

While searching, you can see the following menu on the screen.

When scanning is finished, you can see the following information on the screen. After the scanning process, the first program of the last scanned channel will be displayed on the back screen


✓

Now you have completed all steps needed for watching programs. If you could not see the program after finishing these procedures, please contact your engineer or representative.

✓ If you press the MENU or EXIT button in the middle of AUTO SCAN, the first stored

channel will be displayed, and the AUTO SCAN stops.

How to Search Manually

You can edit parameters of certain channels and scan them.

1

Press MENU button.


4

5

6

7

2

3




Press / Buttons to move to “MANUAL SCAN”.

Press buttons to select MANUAL SCAN”

MANUAL Scan menu appears.

Press / buttons to move to “Channel”.

Press / buttons to select a channel or press button and choose them directly with using the numeric keys.

8

9

10

Press / buttons to move to “Tx Mode”.

Press / buttons, then mode changes in order below.

➛ Auto ➛ 8K➛ 2K ➛

Press / buttons to move to “Bandwidth”.

34

DTV Channel Setup

11

Press / buttons to select “Bandwidth”, and set the proper value for the selected Channel.

12

13

Press Up and Down buttons to move to “Scan”.

Press buttons to store all the entered channel data. Then you can get the following menu showing the scanning process.

After scanning process, the first channel of scanned channel will be displayed.

14


✓ If the scan fails, please check whether your entered values are correct or not

and the signal reception sensitivity is good or bad.

How to Check Channel State

Users can check parameters of certain channels and scan them.

1

4

5

6

7

2

3

Press MENU button.





Press / Buttons to move to “CHANNEL STATE” icon.

Press buttons to select CHANNEL STATE”

Tuner State menu appears.

Press / buttons to select the channel you want.


♦ Level : Indicating selected network signal strength level.

♦ Quality : Indicating signal to noise ratio.

✓ When the channel is selected, you can check the reception status of the signal.

If the reception signal status is bad, adjust antenna to get the following result.

♦ Tuner : Lock

♦ Level : over 30%

♦ FEC : 1/2, 2/3, 3/4, 5/6 or 7/8

♦ Quality : over 40%

35

DTV Channel Setup

How to Use the Guide (EPG : Electronic Program Guide)

Users can check the channel information on the channels of the transponder they are watching.

2

3

4

5

6

1

7

8

Press MENU button.





Press / Buttons to move to “GUIDE”.

Press buttons to select GUIDE”

Program Guide menu appears.

Press / buttons to select Channel, you can see the current or next program information of the selected channel.

➥ Press “GREEN” button. The current or next program information would be converted to the next or current program information respectively.

➥ Press “YELLOW” button. You can see the program schedule list of the selected channel.

If you want to see the program information of a program in the schedule list,

Press / buttons to select the program. You will see the information in the right window.

➥ Press “BLUE” button. You will see extended information of the selected program.


✓ supported by 7 language : English, French, German, Italian, Spanish,

Dutch, Suomi

36

DTV Channel Setup

How to Select Channel List

Users can change the current channel to any other channel they want.

1

2

3

4

5

6

7

8

Press MENU button.


Press / buttons to move to “DTV CHANNEL” icon.



Press / buttons to move to “CHANNEL LIST”.

Press buttons to select CHANNEL LIST”

Channel List menu will appear, detailed information of the selected channel will be displayed in the right section (Name of network, frequency, bandwidth, etc).

Press / (page up/down) or / buttons (scroll up/down) buttons to select the channel you want

Press buttons, The selected channel appears on the screen.


37

How to Set Favorite Channel

Users can store frequently watched channels to quickly access a preferred channel.

8

9

1

2

3

4

5

6

7

Press MENU button.


Press / buttons to move to “DTV CHANNEL” icon.



Press / buttons to move to “CHANNEL LIST”.

Press button to select CHANNEL LIST”

Press / (page up/down) or / buttons (scroll up/down) buttons to select the channel you want

➥ Press RED button, then Favorite State menu appears.

Press / buttons to move to favorite state list of 1~5.

➥ Press WHITE button. You can rename them for their convenience.

Press button. You favorite state list will be stored. An apple symbol will occur on the ALL LIST MENU.


How to Use Channel List Mode

Users can see variant channel lists which may enable them to edit and select channels more conveniently.

DTV Channel Setup

1

2

3

4

Press CH. LIST button.

Channel list appears on the screen.

Press “ORANGE” button, then you can see “Channel List Mode” window.

Select required option by pressing the / buttons, then Press / buttons to select you want.

Press buttons.

You will see the following mode.

♦ Favorite Mode : You can see favorite 1 ~ 5 channel list.

♦ Alphabet Mode : You can see the channel alphabetical listed.

- ABC : If you want to see all channels listed in alphabetic order, select ‘ABC’.

- ETC : If you want to see channels without numeric or alphabetic initials.

♦ Network Mode : You can see the channel list in network style.

5


How to Lock Channel

This menu enables users to prevent children from viewing programs unsuitable for their age.

1

2

3

4

5


Channel list menu appears on the screen.

Press / or / buttons to select the channel you want to lock.

Press “GREEN” button.

Then the selected channel is locked.

Press MENU, EXIT or button to finish the process.

Without entering you password, you cannot watch a locked channel’s program.

The original password is programmed to 0-0-0-0. Please refer to 38 page “How to Factory Set” for changing the password.

✓ If you want to cancel the channel lock, go to the channel list and select the

channel and press GREEN.

38

DTV Channel Setup

How to Set the Channel Order

Users can organize the number or sequence of the channels.

1

4

5

2

3

6



Press / or / buttons to select the channel you want to move.

Press “YELLOW” buttons.

Press

/ or /

buttons to move to the position you want to move.

Press buttons, the channels will move automatically to the programmed position.


How to Delete Channel

Users can delete channels from the channel list.

1

2

3

4



Press / or / buttons to select the channel you want to remove.

Press BLUE buttons.

Then, you need to confirm the deletion.

If you definitely want to delete, press buttons. If not, press EXIT.

You can find the deleted list in left window.


39

DTV Channel Setup

How to Add Channel

Users add channels they want.

1



2

Press WHITE buttons.

The Add Digital Channel window will appear.

3

4

Select the channels with / buttons or numeric keys.

Select required option by pressing the / buttons, then Press numeric keys to enter the proper value.

5


✓ The above mentioned VIDEO PID, AUDIO PID, PCR PID are very important for

optimal terrestrial signal reception. We recommend you to get professional advices where available. You can’t setup “VIDEO PID” for RADIO channels.

How to Factory Set

The status of the Digital-TV will return to factory default parameters by using this function.

6

7

1

4

5

2

3

Press MENU button.





Press / Buttons to move to “FACTORY SET”.

Press buttons to select FACTORY SET”

“Factory Set” is highlighted.

Press button to select “Factory Set”.

A window will appear, asking you to confirm.

When the menu asks you to confirm the reset, press if you want to reset or press EXIT key if you want to void the reset.

✓ When you forgot your new password, please consult the shop where you bought

the TV or the nearest dealer.

✓ After choosing Factory Set, reset the power.

40

DTV Channel Setup

Setting DayLight Saving Time(Summer Time)

Users can use this menu when they want to change a TV channel to a Radio channel or vice versa.

1

2

Press / buttons to select “DL Saving”

Press / buttons to select.

Then it will change “YES” or “NO”

YES : Set for daylight saving function activated. The current time automatically moves on hour ahead.

NO : Set for daylights saving function deactivated. The current time automatically moves on hour behind.

✓

Without current local time setting, this menu cannot be processed.

How to TV/RADIO switching

Users can use this menu when they want to change a TV channel to a Radio channel or vice versa.

➥ Press “TV/RADIO” button.

Avoid listening to the radio for a long time, without changing the screen image. It can cause “Image Sticking”.

Check “Image Retention Effect (Image Sticking)” at the beginning of the manual.

✓ it will convert to Black screen after 5-10 seconds for remove after image.

41

DTV Channel Setup

How to Subtitle / Audio

Users can adjust the subtitle and audio condition/status of the current channel.

1

2

Press “S.MODE” button.

Subtle and audio related window will be displayed on the screen.

Select required option by pressing the / buttons, then Press / buttons to select you want.

If Dig. Output is supported, you can select MPEG Stereo or Dolby Digital/AC3.

✓ These subtitle and audio parameters are workable only when the receiving

channel supports these functions

How to Select Channel / Information

Brief information is displayed, such as current channel type, name, local start/end time, guide information, current time, fav/normal mode, Audio mode and Audio ID.

➥ Press “INFO” button.

The information bar will pop-up.

✓ If you have no information : Check if your local time settings are correct or infor-

mation is not sent by the channel provider.

42

DTV Channel Setup

How to Set Teletext in DTV

You can use Teletext service in iDTV mode.

The icon on the screen means your TV is receiving Teletext service.

1

2

Press “TTX/MIX” button and wait.

If the “*” sign pops up left upside of the screen as the following picture, wait until the teletext service menu is displayed “*” means it provides teletext service. So wait a moment.

Select your interesting item with numeric keys.

43

Appendix

Troubleshooting

Symptom

How can I install an antenna?

Possible solution

Refer to page 13.

TV screen is not clear after installing an indoors antenna.

How can I view cable broadcasting?

Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna.

Please install a cable broadcasting receiver (Converter).

Symptom

Picture turns on slowly after power is on.


Neither picture nor sound comes up.

Check whether power is on.

Check whether the power is cut or whether the power cord is properly connected.

Try to plug another product’s power cord to the same outlet to check the outlet itself.

This symptom is not a malfunction. This delay is designed to prevent the distorted and noisy picture when the power is on. However, if the picture does not appear more than

5 minutes after the power is on, call a service center.

Picture is distorted or frozen while watching digital broadcasting.

This symptom may be caused by weak reception. Contact your local station or cable company.

Input Source information only appears on black screen.

Check whether your TV is properly connected to external devices.

Poor reception on some channels.

Check whether you selected proper channels. Try re-orienting your antenna. Ensure

LNA is activated.

Black and white on some channels.

Check other channels for black and white screen. Adjust colour.

TV won’t turn on.

Ensure the power cord is plugged.

Adjust brightness.

Screen is too bright or too dark.

Auto On does not work.

Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased.

44

Appendix

Troubleshooting

After setting the time,

I turned TV off and turn it on.

The programmed information has been erased.

Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased.

Symptom Possible solution

Too much noise occurs.

No sound while viewing a cable channel

Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound may be distorted in areas with poor reception or located far away from a TV broadcasting station.

Make sure audio or audio/video components are securely inserted into the appropriate jacks. Check other channels for sound. Check the volume settings on the cable broadcasting receiver.

Picture is OK but sound does not come out.

Try to press volume up/volume down buttons of your remote control.

One of the speakers does not produce sound.

Select sound balance and make proper adjustment. (Page 23)

Check the speaker connection cables.

Symptom

Remote control won't work.


Check whether there is a blocking object between the remote control and PDP.

Make sure your PDP is Power On. (Normally, the LED on the front panel is red.)

Check whether batteries are inserted with proper polarities(+, -).

When the batteries are worn out, replace them.

Connect the two Audio jacks from the S-Video cable to the left and right ports on the

Composite.

Where does the S-Video cable plug in for audio output?

Strange noises are heard.

Ticking noises during or after watching are caused by the change of ambient environment such as humidity and temperature, which is characterized by plastic products. Strange ticking noises occur because a signal is suddenly transmitted to the

PDP panel. So, It is not a malfunction.

I tried to use the TV screen as a PC monitor but it doesn’t work.

Adjust the resolution referring to the standard signal mode table. Check the specification of your video card installed in your PC. If your video card does not work in the supported hardware, try upgrading the video card’s driver.

45

Appendix

Product Specifications

Model

Input

Video Output

Audio Output

TV/Video

Full-Scart

Half-Scart

S-Video

Video (RCA)

Component(Y/Cb/Cr)

Antenna

PC Connection jack

Max. resolution

Audio

DVI-HDCP / HDMI

Digital SPDIF Optical

Digital SPDIF Coaxial

Subwoofer

Color system

Sound system

Video system

E260D

1 (A/V)

1 (A/V)

1 (A/V audio common)

1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,

Composite, PC, DVI/HDMI

Power Supply

Consumption power

AC 100 - 240 V, 50/60 Hz

Typical 120W

Stand-by power

Typical 3W

Dimension (W x D x H mm - Stand included)

684 x 194 x 541.5

Weigh (Stand included)

Control type

12.6 Kg

Remote control, Key control

E320D/E370D

1 (A/V)

1 (A/V)


1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,


E420D/E460D

1 (A/V)

1 (A/V)


1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,


AC 100 - 240 V, 50/60 Hz

Typical 150W

Typical 3W

E320D : 806x 229 x 617

E370D : 939x350 x728

E320D : 17.0 Kg

E370D : 26.6Kg


AC 100 - 240 V, 50/60 Hz

Typical 225W

Typical 3W

E420D : 1057 x 350 x 796

E460D : 1143 x 350 x845

E420D : 32.6 Kg

E460D : 31.0Kg


- The above specifications may be subject to change without prior notice.

46

Appendix

Product Specifications

Model

Input

Video Output

Audio Output

TV/Video

Full-Scart

Half-Scart

S-Video

Video (RCA)

Component(Y/Cb/Cr)

Antenna

PC Connection jack

Max. resolution

Audio

DVI-HDCP / HDMI

Digital SPDIF Optical

Digital SPDIF Coaxial

Subwoofer

Color system

Sound system

Video system

E261D

1 (A/V)

1 (A/V)


1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,


Power Supply

Consumption power

Stand-by power

Dimension (W x D x H mm - Stand included)

AC 100 - 240 V, 50/60 Hz

Typical 120W

Typical 3W

815 x 194 x 476.5

Weigh (Stand included)

Control type

12.6 Kg


E321D/E371D

1 (A/V)

1 (A/V)


1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,


AC 100 - 240 V, 50/60 Hz

Typical 150W

Typical 3W

E321D : 965x 229 x 551

E371D : 1090x310 x627

E321D : 17.0 Kg

E371D : 26.6Kg


E421D/E461D

1 (A/V)

1 (A/V)


1 (Audio included)

1 (Audio included)

1

D-SUB

1366 X 768 @ 75 Hz

L/R

1

1 (Audio included)

1

1

1

PAL/SECAM L

FM, NICAM

Component, S-Video,


AC 100 - 240 V, 50/60 Hz

Typical 225W

Typical 3W

E421D : 1057 x 350 x 796

E461D : 1143 x 350 x845

E421D : 32.6 Kg

E461D : 31.0Kg


- The above specifications may be subject to change without prior notice.

47

No results