Kodak Advantix Flash One-Time-Use film camera Instructions
Pubblicità
Pubblicità
CIS-174
April 1996
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK ADVANTIX Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
1
Wind Off
Frame
Counter
Access Hole
Shutter Button
2 b
Thumbwheel
• Check the Frame Counter window, X’s must
be visible.
• Check the Access Hole, it must be black.
• If not, grip camera, press Shutter Button and turn Thumbwheel until it stops.
2 a
Remove Film
Access Hole
• Push down until film cassette pops out.
3
Remove Battery
• Insert the punch end of the opening tool into the Access Hole.
NOTE: The film cassette door is closed only when the Access Hole is black.
Bend Here
• Remove cardboard cover.
• Insert special tool into end slot.
• Use tool to bend cover back and remove battery.
CAUTION: To avoid injury, use tool carefully. Do not hit camera against object to open or the film door may open and fogg the film.
©Eastman Kodak Company, 1996
4
Opened Camera with Film and Battery
Battery
Other
5 • Place in recycle bin.
• Return to Kodak for recycling.
Film
CAUTION: This camera body contains a high voltage capacitor and circuit board. To avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board.
Current Information Summaries provide information of limited or specific application. Responsibility for judging the timeliness and applicability of the information to a specific photographic use rests with the end user.
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650
CIS-174
Opening Instructions for the KODAK
ADVANTIX Flash One-Time-Use Camera
Kodak, Advantix, and the
Advanced Photo System symbol and logotype are trademarks.
Minor Revision 12-98
Printed in U.S.A.
Scarica
Pubblicità