STTH100W06C
Features
■
■
■
■
■
■
Ultrafast switching
Low reverse recovery current
Low thermal resistance
Reduces switching losses
ECOPACK
®
2 compliant component
Ribbon bonding for more robustness
Description
The STTH100W06CW, uses ST Turbo 2, 600 V technology. It is especially suited to be used for
DC/DC and DC/AC converters in secondary stage of MIG/MMA/TIG welding machine. Housed in
ST's TO-247, this device offers high power integration for all welding machines and industrial applications.
Turbo 2 ultrafast high voltage rectifier
Datasheet
production data
A2
A1
K
A1
K
A2
TO-247
STTH100W06CW
Table 1.
Device summary
Symbol
I
F(AV)
V
RRM t rr
(typ)
T j
(max)
V
F
(typ)
Value
2 x 50 A
600 V
55 ns
175 °C
0.92 V
October 2012
This is information on a product in full production.
Doc ID 023615 Rev 1 1/8 www.st.com
8
Characteristics
1 Characteristics
STTH100W06C
Table 2.
Absolute ratings (limiting values, at 25 °C, unless otherwise specified, per diode)
Parameter Value Unit Symbol
V
RRM
I
F(RMS)
I
I
F(AV)
FSM
T stg
T j
Repetitive peak reverse voltage
Forward rms current
Average forward current,
= 0.5
T c
= 135 °C Per diode
T c
= 120°C Per device
Surge non repetitive forward current t p
= 10 ms sinusoidal
Storage temperature range
Maximum operating junction temperature
600
75
50
100
V
A
A
360 A
-65 to + 175 °C
+ 175 °C
Table 3.
Symbol
Thermal resistance
Parameter Value Unit
R th(j-c)
Junction to case
Per diode
Total
R th(c)
Coupling
When diodes 1 and 2 are used simultaneously:
T j
(diode 1) = P(diode 1) x R th(j-c)
(per diode) + P(diode 2) x R th(c)
0.55
0.35
0.15
°C / W
°C / W
Table 4.
Symbol
Static electrical characteristics (per diode)
Parameter Test conditions
I
R
(1)
Reverse leakage current
T j
= 25 °C
T j
= 125 °C
V
R
= V
RRM
V
F
(2)
Forward voltage drop
T j
= 25 °C
T j
= 150 °C
T j
= 25 °C
T j
= 150 °C
I
F
= 50A
I
F
= 100 A
1.
Pulse test: t p
= 5 ms,
< 2%
2.
Pulse test: t p
= 380 µs,
< 2%
To evaluate the conduction losses use the following equation:
P = 0.85 x I
F(AV)
+ 0.006 I
F
2
(RMS)
Min.
Typ.
Max.
Unit
20
20
200
1.45
0.92
1.15
1.65
1.15
1.45
µA
V
2/8 Doc ID 023615 Rev 1
STTH100W06C Characteristics
Table 5.
Symbol
I
RM
Q
RR
S factor
Dynamic electrical characteristics (per diode)
Parameter
Reverse recovery current
Reverse recovery charge
Softness factor
Test conditions
T j
= 125 °C
I
F
= 50 A, V
R
= 400 V dI
F
/dt = -200 A/µs t rr t fr
V
FP
Reverse recovery time
Forward recovery time
Forward recovery voltage
T j
= 25 °C
T j
= 25 °C
T j
= 25 °C
I
F
= 1 A, V
R
= 30 V dI
F
/dt = -100 A/µs
I
F
= 50 A, V
FR
= 1.0V
dI
F
/dt = 200 A/µs
Min.
Typ.
Max.
Unit
30
3700
0.3
40 A nC
55
1.3
75
200
2
Figure 1.
Average forward power dissipation versus average forward current
(per diode)
Figure 2.
Forward voltage drop versus forward current (per diode) ns ns
V
80
P
F(AV)
(W)
70
60
50
40
30
20
10
0
0 10
δ = 0.05
δ
= 0.
1
20
δ
= tp/T
30
δ = 0.2
T tp
40
δ = 0.5
δ = 1
50 60
I
F(AV)
(A)
70
1000.0
I
FM
(A)
100.0
T j
=150 °C
(Typical values)
T j
=150°C
(Maximum values)
10.0
1.0
0.1
0.0
0.4
0.8
1.2
T j
=25 °C
(Maximum values)
1.6
V
FM
(V)
2.0
2.4
Figure 3.
Relative variation of thermal impedance junction to case versus pulse duration
Figure 4.
Peak reverse recovery current versus dI
F
/dt (typical values, per diode)
IRM(A)
1.0
Zth(j-c)/Rth(j-c)
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
Single pulse
0.1
0.0
1.E-04 1.E-03 1.E-02 1.E-01 tp(s)
1.E+00
70
60
50
40
30
20
10
0
0
I
F
=I
F(AV)
V
R
=400 V
T j
=125 °C
50 100 150 200 250 300 350 dIF/dt(A/µs)
400 450 500
Doc ID 023615 Rev 1 3/8
Characteristics STTH100W06C
Figure 5.
Reverse recovery time versus dI
F
/dt
(typical values, per diode)
Figure 6.
Reverse recovery charges versus dI
F
/dt (typical values, per diode)
400 trr(ns)
350
300
I
F
=I
F(AV)
V
R
=400 V
T j
=125 °C
7000
Q
RR
(nC)
6000
I
F
=I
F(AV)
V
R
=400 V
T j
=125 °C
5000
250
4000
200
3000
150
2000
100
1000
50 dIF/dt(A/µs) dIF/dt(A/µs)
0
0 50 100 150 200 250 300 350 400 450 500
0
0 50 100 150 200 250 300 350 400 450 500
Figure 7.
Reverse recovery softness factor versus dI
F
/dt (typical values, per diode)
0.7
S factor
0.6
I
F
=I
F(AV)
V
R
=400 V
T j
=125 °C
0.5
0.4
0.3
0.2
0.1
0.0
0 dIF/dt(A/µs)
50 100 150 200 250 300 350 400 450 500
Figure 8.
Relative variation of dynamic parameters versus junction temperature
2.0
1.5
1.0
0.5
0.0
25
S
FACTOR
I
RM
Q
RR
50 75
I
V
R
F
=I
F(AV)
=400 V
Reference: T j
=125 °C
100
Tj(°C)
125
Figure 9.
Transient peak forward voltage versus dI
F
/dt (typical values, per diode)
5
VFP(V)
I
F
=I
F(AV)
T j
=125 °C
4
Figure 10.
250 tfr(ns)
200
Forward recovery time versus dI
(typical values, per diode)
I
F
=I
F(AV)
V
FR
=1 V
T j
=125 °C
F
/dt
3 150
2
1
0
200 250 300 350 400 dIF/dt(A/µs)
450 500
100
50
0
200 250 300 350 400 dIF/dt(A/µs)
450 500
4/8 Doc ID 023615 Rev 1
STTH100W06C Characteristics
Figure 11.
Junction capacitance versus reverse voltage applied (typical values, per diode)
1000
C(pF)
F=1 MHz
V
OSC
=30 mV
RMS
T j
=25 °C
100
10
1 10 100
V
R
(V)
1000
Doc ID 023615 Rev 1 5/8
Package information STTH100W06C
●
●
●
Epoxy meets UL94, V0
Cooling method: by conduction (C)
Recommended torque value: 0.55 N·m (1.0 N·m maximum)
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Table 6.
TO-247 dimensions
Dimensions
Millimeters Inches Ref.
Min.
Typ.
Max.
Min.
Typ.
Max.
D
L
S
L1
E
∅R
1 2 3 b1 b2 b e
L2
A1
A c
Heat-sink plane
∅P
3 2 1
BACK VIEW
A 4.85
A1 2.20
b 1.00
b1 2.00
5.15
0.191
2.60
0.086
1.40
0.039
2.40
0.078
0.203
0.102
0.055
0.094
b2 3.00
c
D
(1)
0.40
19.85
3.40
0.80
0.118
0.015
20.15 0.781
0.133
0.031
0.793
E 15.45
e 5.30
5.45
15.75 0.608
5.60
0.620
0.209 0.215 0.220
L 14.20
14.80 0.559
0.582
L1 3.70
4.30
0.145
0.169
L2
P (2)
3.55
R
4.50
18.50 typ.
3.65
0.139
5.50
0.177
0.728 typ.
0.143
0.217
S 5.30
5.50
5.70
0.209 0.216 0.224
1.
Dimension D plus gate protrusion does not exceed 20.5 mm
2.
Resin thickness around the mounting hole is not less than 0.9 mm
6/8 Doc ID 023615 Rev 1
STTH100W06C Ordering information
Table 7.
Ordering information
Ordering type Marking
STTH100W06CW STTH100W06CW
Package
TO-247
Weight Base qty Delivery mode
4.46 g 50 Tube
Table 8.
Date
05-Oct-2012
Document revision history
Revision
1 First issue.
Changes
Doc ID 023615 Rev 1 7/8
STTH100W06C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8 Doc ID 023615 Rev 1
