STTH6010
Ultrafast recovery - high voltage diode
Main product characteristics
I
F(AV)
V
RRM
T j
V
F
(typ) t rr
(typ)
60 A
1000 V
175° C
1.3 V
49 ns
Features and benefits
■
■
■
■
■
Ultrafast, soft recovery
Very low conduction and switching losses
High frequency and/or high pulsed current operation
High reverse voltage capability
High junction temperature
Description
The high quality design of this diode has produced a device with low leakage current, regularly reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability.
Such demanding applications include industrial power supplies, motor control, and similar mission-critical systems that require rectification and freewheeling. These diodes also fit into auxiliary functions such as snubber, bootstrap, and demagnetization applications.
The improved performance in low leakage current, and therefore thermal runaway guard band, is an immediate competitive advantage for this device.
A
Order codes
Part Number
STTH6010W
K
K
DO-247
STTH6010W
A
Marking
STTH6010W
March 2006 Rev 1 1/8 www.st.com
8
Characteristics
1 Characteristics
STTH6010
Table 1.
Symbol
V
RRM
I
F(RMS)
I
F(AV)
I
FRM
I
FSM
T stg
T j
Absolute ratings (limiting values at 25° C, unless otherwise specified)
Parameter
Repetitive peak reverse voltage
RMS forward current
Average forward current, δ = 0.5
Repetitive peak forward current t p
= 5 µs, F = 5 kHz square
Surge non repetitive forward current t p
= 10 ms Sinusoidal
Storage temperature range
T c
= 75° C
Maximum operating junction temperature
Value
1000
80
60
450
400
-65 to + 175
175
Table 2.
Thermal parameters
Symbol
R th(j-c)
Junction to case
Parameter Value
0.78
Unit
°C/W
Unit
A
A
°C
°C
V
A
A
Table 3.
Symbol
Static electrical characteristics
Parameter Test conditions
I
R
(1)
V
F
(2)
Reverse leakage current
Forward voltage drop
T j
= 25° C
T j
= 125° C
T j
= 25° C
T j
= 100° C
T j
= 150° C
V
R
= V
RRM
I
F
= 60 A
1.
Pulse test: t p
= 5 ms,
δ
< 2 %
2.
Pulse test: t p
= 380 µs,
δ
< 2 %
To evaluate the conduction losses use the following equation:
P = 1.3 x I
F(AV)
+ 0.0067 I
F
2
(RMS)
Min.
Typ
20
1.4
1.3
Max.
Unit
20
200
2.0
1.8
1.7
µA
V
2/8
STTH6010 Characteristics
Table 4.
Symbol t rr
I
RM
S t fr
V
FP
Dynamic characteristics
Parameter
Reverse recovery time
Reverse recovery current
Softness factor
Forward recovery time
Forward recovery voltage
Figure 1.
Conduction losses versus average current
140
P(W)
=0.5
120
=0.2
100
=0.1
=0.05
80
=1
60
40
20
0
0 10 20 30
I
F(AV)
(A)
40 50 60
T
70 80
Test conditions
I
F
= 1 A, dI
F
/dt = -50 A/µs,
V
R
= 30 V, T j
= 25° C
I
F
= 1 A, dI
F
/dt = -100 A/µs,
V
R
= 30 V, T j
= 25° C
I
F
= 1 A, dI
F
/dt = -200 A/µs,
V
R
= 30 V, T j
= 25° C
I
F
= 60 A, dI
F
/dt = -200 A/µs,
V
R
= 600 V, T j
= 125° C
I
F
= 60 A, dI
F
/dt = -200 A/µs,
V
R
= 600 V, T j
= 125° C
I
F
= 60 A dI
F
/dt = 100 A/µs
V
FR
= 1.5 x V
Fmax
, T j
= 25° C
I
F
= 60 A, dI
F
/dt = 100 A/µs,
T j
= 25° C
Figure 2.
Forward voltage drop versus forward current
I
FM
(A)
200
180
160
140
120
100
80
60
40
20
0
0.0
0.5
T j
=150°C
(Maximum values)
T j
=150°C
(Typical values)
1.0
1.5
Min.
Typ Max.
Unit
2.0
61
49
31
1
4
T j
=25°C
(Maximum values)
V
FM
(V)
2.5
115
80
65
40
750
3.0
ns
A ns
V
3.5
Figure 3.
Relative variation of thermal impedance junction to case versus pulse duration
1.0
Z th(j-c)
/R th(j-c)
Single pulse
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1.E-03 1.E-02 1.E-01 1.E+00
Figure 4.
Peak reverse recovery current versus dI
F
/dt (typical values)
40
30
20
10
0
0
70
I
RM
(A)
60
V
R
=600V
T j
=125°C
50
50
I
F
=0.5 x I
F(AV)
I
F
= I
F(AV)
I
F
= 2 x I
F(AV)
100 150 200 250 300 350 400 450 500
3/8
Characteristics STTH6010
Figure 5.
Reverse recovery time versus dI
F
/dt (typical values)
700
600
500
400
300
200
100
0
0
I
F
= 2 x I
F(AV)
I
F
= I
F(AV)
I
F
=0.5 x I
F(AV)
V
R
=600V
T j
=125°C
50 100 150 200 250 300 350 400 450 500
Figure 6.
Reverse recovery charges versus dI
F
/dt (typical values)
10
9
8
7
6
5
4
3
2
1
0
0
V
R
=600V
T j
=125°C
50
I
F
= 2 x I
F(AV)
I
F
= I
F(AV)
I
F
=0.5 x I
F(AV)
100 150 200 250 300 350 400 450 500
Figure 7.
Softness factor versus dI
F
/dt (typical values)
1.50
S factor
I
F
= 2 x I
F(AV)
V
R
=600V
T j
=125°C
1.25
1.00
0.75
0.50
0 50 100 150 200 250 300 350 400 450 500
Figure 8.
Relative variations of dynamic parameters versus junction temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
25
I
RM
Q
RR
50
S factor t
RR
75
I
F
V
= I
F(AV)
R
=600V
Reference: T j
=125°C
100 125
4/8
STTH6010 Characteristics
Figure 9.
Transient peak forward voltage versus dI
F
/dt (typical values)
V
FP
(V)
20
18
I
F
= I
F(AV)
T j
=125°C
16
14
12
10
8
6
4
2
0
0 100 200 300 400 500
Figure 11.
Junction capacitance versus reverse voltage applied (typical values)
1000
C(pF)
F=1MHz
V osc
T j
=30mV
RMS
=25°C
Figure 10.
Forward recovery time versus dI
F
/dt
(typical values)
1200
V
FR
I
F
= I
F(AV)
= 1.5 x V
F max.
T j
=125°C
1000
800
600
400
200
0 100 200 300 400 500
100
10
1 10 100 1000
5/8
Package information STTH6010
Epoxy meets UL94, V0
Cooling method: by conduction (C)
Recommended torque value: 0.80 Nm
Maximum torque value: 1.0 Nm
Table 5.
DO-247 dimensions
L
L3
L5
V
V
V2
H
G
F
Dia
L2
L4
F2
F3
L1
D
M
A
E
DIMENSIONS
Millimeters Inches REF.
Min.
Max Min.
Max.
A
D
E
F
4.85
2.20
0.40
1.00
5.15
0.191
2.60
0.086
0.80
0.015
1.40
0.039
0.203
0.102
0.031
0.055
F2
F3 2.00
G
2.00
10.90
H 15.45
L 19.85
L1 3.70
2.40
0.078
15.75 0.608
20.15 0.781
4.30
0.145
0.078
0.429
0.094
0.620
0.793
0.169
L5
M
V
L2 18.50
0.728
L3 14.20
L4 34.60
14.80 0.559
1.362
0.582
5.50
0.216
V2
2.00
Dia.
3.55
5°
60°
3.00
3.65
0.078
0.139
5°
60°
0.118
0.143
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
6/8
STTH6010 Ordering information
Part Number
STTH6010W
Marking
STTH6010W
Package
DO-247
Weight
4.4 g
Base qty Delivery mode
30 Tube
Date
02-Mar-2006
Revision
1 First issue.
Description of Changes
7/8
STTH6010
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8
