Panasonic KX-T7130B Corded Phone

Panasonic
Proprietary Telephone
for Electronic Modular Switching System
MODEL NO. KX-T71 30
Reference Manual
KX-T7130 is compatible with the Panasonic Electronic Modular Switching Systems
and can perform most functions within each system
Please read before use
Connection
Connect as shown.
To the EMSS Control
Unit
Included accessories
Handset euro one Card holder with memory
station card... one
Initial setting
VOLUME
MAX uma MN RINGER
HANDSET TO
YOLUME HANDSET/HEADSET
HIGH =e OFF
LOW
\
Im |
NORMAL HIGH
HANDSET VOLUME Selector:
NORMAL: The handset volume will be soft.
HIGH: The handset volume will be loud.
RINGER VOLUME Selector:
HIGH: The ringing sound will be ioud.
LOW: The ringing sound will be soft.
OFF: The telephone will not ring.
VOLUME Control:
MAX: The volume will be loud.
MIN: The volume will be soft.
CONTRAST MEMORY
TO EMSS — |
MEMORY Switch:
Set to “SET”.
For station programming, set to
“PROGRAM”.
HANDSET/HEADSET Selector:
Set to “HANDSET”.
CONTRAST Selector:
Set to “LOW”, “MID” or “HIGH” to choose the best
display intensity.
Location of controls
fr \
Panasonic
©
=======
mI OO CCA ao ci —
O = =p =F c—=1—8
©) ©
5-0
(4 )(5)(6) > TO
7)(s)(9) 3 18
ES—1—0
pop 3 1—0
Ne J
& — (5
(9) —(6
KX-T71301s compatible with the Panasonic Electronic Modular
Switching Systems and can perform most functions within each
system
INTERCOM Button and
Indicator:
Used to make or receive an
intercom call.
CONFERENCE Button and
Indicator:
For talking among three
parties.
REDIAL Button:
For redialing the last dialed
number.
FLASH Button:
For sending the hooking
signal to the CO line.
LCD (Liquid Crystal Display)
Programmable Feature Buttons:
For dialing or system feature
access with one touch.
Flexible CO Line Buttons and
Indicator: . —.
Used for CO line, Direct
Station Selection, or
Programmable Feature
buttons.
This function requires
upgraded versions in case of.
KX-T30810B and |
KX-T61610B systems.
Flexible Message Waiting
Button and Indicator:
Used for Message Waiting,
Direct Station Selection, or
Programmable Feature
button.
This function requires
upgraded versions in case of
KX-T30810B,
KX-T61610B and
KX-T123210DB systems.
(9) SAVE Button:
Used to temporarily store the
number in the redial memory.
TRANSFER Button:
Used to transfer an outside
or an intercom call to any
extension.
PAUSE Button:
For pausing during a dialing .
operation.
AUTO DIAL/STORE Button and
Indicator:
For dialing the system speed
- dialing/For storing an
operating procedure into
memory.
AUTO ANSWER/MUTE
Button and Indicator:
For answering an intercom
call automatically/For
suspending your voice in
hands-free mode.
SP-PHONE Button and
Indicator:
-Used to make or receive a
phone call without using the
handset.
HOLD Button:
For placing a call on hold
during a conversation.
FWD/DND Button and Indicator:
- For setting or canceling the
CALL FORWARDING/DO
NOT DISTURB feature.
Using overlay
When the System Program Switch on the EMSS Control Unit is set to the
position for programming, the function of the KX-T7130 connected to your
EMSS Control Unit will change as follows.
E = | == | г
[1]
PAUSE
[ |
С
PREV FLASH END NEXT
L |
SECRET
«a
>
=f =f = ds |
C=3— CLEAR
CH PAUSE
IT ————STORE/AUTO
(== SELECT
PREV ———— NEXT
FLASH ——— ‘ -END
— 5 —
Installing the card holder
Match the marks (') on the
card holder and on the slide
rails on the unit.
Push two shaded portions
2 siightly and insert the edges
of the hoider under the slide
. rails and-then slide down in
- direction of arrow “A”.
Removing the card holder:
Push the card holder in the
direction of arrow “B” while
keeping the tip of the holder pulled
in the direction of arrow “C”, to
take off the holder.
Wall mounting
This unit can be mounted on the wall phone plate.
Turn around the handset 4 Place the stand.
hook. . "
| Mount the unit on the wall
- phone plate.
\
Rotate the stand in the To temporarily place the handset
direction of the arrow. down during a conversation, hook
as shown.
(
N
Matsushita Electric Industrial Co., Ltd.
Central P.O.Box 288, Osaka 530-91, Japan
Printed in Japan PQQX6404ZA F1290C2095