Planning Information

Built-In Model 642

Side-by-Side Refrigerator / Freezer

Model 642/F

Framed

Model 642/O

Overlay

Model 642/S (P/B)

Stainless Steel

Front venting allows unit to be completely built in

Serial and model number plate

Adjustable wire shelves

Automatic ice maker

Ice storage drawer

Roll-out freezer baskets

Four-sided magnetic gaskets

Removable kickplate

Hermetically sealed refrigeration units

Lighted electronic control panel

Adjustable dairy compartment

Adjustable roll-out utility basket

Adjustable spillproof glass shelves

Egg tray

Adjustable door shelves

High humidity crisper drawer

Door closers

(Stainless steel design shown)

With the installation of a harness kit, these appliances are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on star-k.org. You may purchase this harness kit through your Sub-Zero dealer.

To obtain local dealer information, visit the Locator section of our website, subzero.com.

The Sub-Zero Model 642 side-by-side refrigerator / freezer is available in your choice of the framed, overlay or stainless steel design application. Three stainless steel finishes are offered—classic (/S), platinum (/P) and carbon (/B).

J

ust six inches bigger than the Model 661, the Model

642 satisfies the need for additional storage. This midsize unit is one of the more popular Sub-Zero models of the side-by-side configuration. Storage in the doors and spacious interior seem to be everything a customer could need in their home.

Dimensions in parentheses are in millimeters unless otherwise specified.

11/06

1

Planning Information

Built-In Model 642

F E A T U R E S

42" (1067) wide side-by-side refrigerator / freezer

Framed, overlay and stainless steel applications provide complete design flexibility

Sub-Zero's dual refrigeration system ensures the freshest food and energy efficiency

Shallow-depth design means access is easy to any area of the refrigerator

Electronic digital controls are up front and easy to use

Bright interior lighting

Adjustable, spill-proof glass shelves

High-humidity crisper drawer is large with smooth sides for easy cleaning – there's even an added storage drawer

Door alarm will let you know with an audible beeping if your refrigerator or freezer door is left ajar

Automatic ice maker provides an ample supply of crescent-shaped ice

Solid core doors with magnetic gaskets and door closers

Front venting allows unit to be completely built in and serviced from the front

Meets strict Department of Energy requirements

UL approved for US and Canada

Two, five and twelve year residential warranty – exclusions apply; warranty information can be found on our website, subzero.com

O V E R A L L D I M E N S I O N S

84"

(2134)

42"

(1067)

Stainless steel design shown.

Dimensions may vary by ±

1

/

8

" (3).

Dimensions in parentheses are in millimeters unless otherwise specified.

24"

(610)

41

1

/

4

"

(1048)

3

/

8

"

(10)

FRAME EXTENSION

23

7

/

8

"

(606)

BEHIND

FRAME

25

9

/

16

"

(649)

42"

(1067)

2

Planning Information

Built-In Model 642

M O D E L O P T I O N S

Framed Design

Overlay Design

Classic Stainless Steel

Platinum Stainless Steel

Carbon Stainless Steel

642/F

642/O

642/S

642/P

642/B

You must allow 90 days from order to delivery for platinum and carbon finishes.

A C C E S S O R I E S

Louvered, panel or stainless steel grilles in 1" (25) increments from

10" (254) to 15" (381) high

Front and grille panels for framed design in white, almond and classic stainless steel

Side panels in white, almond and classic stainless steel

Extended framed handles

Stainless steel and polished chrome handles for overlay design

Gallon door shelf

Dozen egg container with lid

90˚ and 105˚ door stop kits

Accessories are available through your

Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.

S P E C I F I C A T I O N S

Model 642

Overall Width

Overall Height

Overall Depth

Refrigerator Capacity

Freezer Capacity

Minimum Height (levelers in)

Door Swing Clearance

Side-by-Side Refrigerator / Freezer

42" (1067)

84" (2134)

24" (610)

16.2 cu ft (459 L)

8.2 cu ft (232 L)

83" (2108)

25

9

/

16

" (649)

Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit

Plumbing Requirements

1

/

4

" copper line

Water Supply

Annual Energy Usage

(based on 9.06 cents per kilowatt hour)

Shipping Weight

20–100 psi

650 kWh / $ 59

Framed – 541 lbs (245 kg)

Overlay – 541 lbs (245 kg)

Stainless Steel – 582 lbs (264 kg)

Specifications are subject to change without notice.

Dimensions in parentheses are in millimeters unless otherwise specified.

3

Planning Information

Built-In Model 642

I N S T A L L A T I O N S P E C I F I C A T I O N S

24"

(610)

ROUGH

EXTEND WATER LINE

APPROX. 36" (914)

FROM BACK WALL

OPENING

DEPTH

SHUT-OFF

VALVE

TOP VIEW

LOCATE ELECTRICAL

WITHIN SHADED AREA

7"

(178)

E

6"

(152)

83

3

/

4

"

(2127)

ROUGH

OPENING

HEIGHT

WITH

STANDARD

11" (279)

GRILLE

41

1

/

2

"

(1054)

ROUGH OPENING WIDTH

3"

(76)

LOCATE WATER SUPPLY

WITHIN SHADED AREA

18"

(457)

6"

(152)

W

FRONT VIEW

75

1

/

2

"

(1918)

D I M E N S I O N S

Finished Rough Opening Width

Finished Rough Opening Height

Finished Rough Opening Depth

Location of Electrical

Location of Water Supply

41

1

/

2

" (1054)

83

3

/

4

" (2127)

24" (610)

Within upper shaded area

Within lower shaded area

See Installation Instructions shipped with unit for detailed specifications.

Refer to the Sub-Zero Design Guide pdf file for additional specifications.

Dimensions in parentheses are in millimeters unless otherwise specified.

4

Planning Information

Built-In Model 642

I N S T A L L A T I O N N O T E S

Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.

Allow the doors to open a minimum of 90˚ or you'll have problems removing drawers. With the doors opening at 90˚, you may have to move drawers slightly to clear the door interior.

Refer to the minimum door swing clearances in the specifications chart.

For corner installations, allow for a minimum

3" (76) filler so that the door can open to 90˚.

If you're using raised panels, consider using a wider filler. A 90˚ door stop is available as an accessory.

Be sure to add the filler strip width to your finished rough opening dimension. In any sideby-side installation without a filler strip, add an additional

1

/

2

" (13) to your combined numbers.

This will allow for the proper width.

Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.

If your client has chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front panels.

If your client has chosen the framed or overlay design, you will be adding front panels to give the unit the custom Sub-Zero look. The overlay design also allows you to add your own handles, or you may choose accessory handles available through your Sub-Zero dealer. Refer to pages 6–10 for detailed information on adding panels.

For Built-In models with an automatic ice maker, rough in the water supply line. Connect a

1

/

4

" OD copper line to the house supply, being sure to use an easily accessible shut off valve between the supply and the unit.

Do not use self-piercing valves. A saddle valve kit (4200880) is available from your

Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.

A line filter is required when water conditions have a high sediment content. The ice maker operates on water pressure of 20 psi

(1.4 bar) to 100 psi (6.9 bar). In some cases a reverse osmosis water filter system may not be able to maintain the minimum water pressure consistently.

The water line should be routed up through the floor within

1

/

2

" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor.

Locate water supply within the shaded area shown in the installation illustration.

Regardless of the routing, allow 3' (.9 m) of excess copper tubing to remain outside the wall or floor for easy connection to the unit.

A 115 volt, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separate circuit, serving only this appliance, be provided.

All Built-In models are equipped with a 6'

(1.8 m) power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle.

Locate electrical within the shaded area shown in the installation illustration.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clearance between the unit and the soffit of 1" (25) or less, you won't need to block the unit.

For installations with clearances of more than 1" (25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Built-In unit.

Refer to the Built-In Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly.

Dimensions in parentheses are in millimeters unless otherwise specified.

5

Planning Information

Built-In Model 642

F R A M E D P A N E L S

PANELS

1

/

4

"

(6) THICK OR LESS

Trim reveal

1

/

4

"

(6)

min

1

/

4

"

(6)

Panel

Framed door panel

1

/

4

" (6) thick or less

PANELS THICKER THAN

1

/

4

"

(6)

Trim reveal

1

/

4

"

(6)

min

Rout to

1

/

4

"

(6) thickness

Framed door panel thicker than

1

/

4

" (6)

A D D I N G P A N E L S

In your plan for panels, be sure you are working with the

Sub-Zero panel design family called for in your design. If you have chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front door panels.

If you and your client have ordered a framed or overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. Specifications on the following pages provide installation considerations for framed and overlay door panels.

Side panels can be used with the framed, overlay and stainless steel design applications. Refer to specifications on page 10.

F R A M E D P A N E L S

If the thickness of the custom panels is less than

1

/

4

"

(6), they must be backed up with a sheet of shim material to build the total thickness to

1

/

4

" (6). If the panel is thicker than

1

/

4

" (6), an edge must be routed around the panel to ensure a proper fit. Refer to the illustrations on this page.

IMPORTANT NOTE: Routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale illustrations on pages 11–14.

IMPORTANT NOTE: The weight of each panel cannot exceed 50 lbs (23 kg).

The traditional framed models come with an 11" (279) louvered grille and elegant full-length handle. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your

Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.

For framed door panel dimensions and dimensions for the optional panel grille for the framed application, refer to specifications on page 7.

To install framed panels, refer to the installation instructions shipped with each unit. These instructions can also be found on our website, subzero.com.

Dimensions in parentheses are in millimeters unless otherwise specified.

6

Planning Information

Built-In Model 642

W

H

A

14"

(356)

H

W W

Framed Door Panels

Framed Grille Panel

F R A M E D P A N E L S

An 11" (279) louvered grille is standard on framed applications. Optional louvered grilles are available in 1" (25) height increments from 10" (254) to 15" (381).

You may choose to use Sub-Zero's optional panel grille for the framed application. Optional panel grilles are available in 1" (25) height increments from 10" (254) to 15" (381).

Refer to the chart below for panel dimensions.

F R A M E D P A N E L D I M E N S I O N S

Refrigerator Door Panel

Freezer Door Panel

Handle Recess Location

Maximum Weight (per panel)

WIDTH HEIGHT

24" (610) 67

11

/

16

" (1719)

15

5

/

8

" (397) 67

11

/

16

" (1719)

A – 38

5

/

32

" (969)

50 lbs (23 kg)

F R A M E D G R I L L E P A N E L D I M E N S I O N S

10" (254) Grille

11" (279) Grille

12" (305) Grille

13" (330) Grille

14" (356) Grille

15" (381) Grille

WIDTH

40

3

/

16

" (1021)

HEIGHT

8

15

/

16

" (227)

40

3

/

16

" (1021) 9

15

/

16

" (252)

40

3

/

16

" (1021) 10

15

/

16

" (278)

40

3

/

16

" (1021) 11

15

/

16

" (303)

40

3

/

16

" (1021) 12

15

/

16

" (329)

40

3

/

16

" (1021) 13

15

/

16

" (354)

Dimensions in parentheses are in millimeters unless otherwise specified.

7

Planning Information

Built-In Model 642

O V E R L A Y P A N E L S

Spacer Panel

.10"

(3) Overlay Panel

1

/

4

"

(6)

Backer Panel

5

/

16

"

(8)

min

5

/

32

"

(4)

1

/

16

"

(2)

Door / Drawer /

Grille Trim

Three panel assembly—cross section

Overlay Panel

Spacer Panel

~

3

/

4

"

(19)

.10"

(3)

1

/

4

"

(6)

Backer

Panel

Three panel assembly—rear view

O V E R L A Y P A N E L S

The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. To achieve this look, the most common way is to work with three panels—the decorative overlay panel, a .10" (3) spacer panel and a

1

/

4

"

(6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or more likely, three different panels.

Regardless of the physical construction of the panels

(routing or three panel assembly), you will need to follow the exact dimensions and panel placement to ensure a proper fit.

The top illustration on this page is a cross section view of the three panel assembly showing placement of the door / drawer / grille trim. The bottom illustration shows a rear view of the three panel assembly and critical dimensions, standard for all overlay models.

Overlay models will come with no handle hardware, because the beauty of this design is that you can match the surrounding cabinetry hardware. These models will come with an 11" (279) panel grille which will accept decorative panel inserts to match the look of the door panels. For overlay door and grille panel dimensions, refer to specifications on page 9.

IMPORTANT NOTE: Keep in mind that the Sub-Zero door panels have the potential for hitting adjacent cabinets and/or countertops when they are opened. You need to be aware of your surrounding cabinetry and space limitations when using the overlay models. Refer to the full-scale illustrations on pages 13–14.

IMPORTANT NOTE: The weight of each door panel assembly cannot exceed 50 lbs (23 kg). The total thickness of all panels for an overlay model must be at least

5

/

8

" (16) thick.

To install overlay panels, refer to the installation instructions shipped with each unit. These instructions can also be found on our website, subzero.com.

Do not exceed the dimensions listed for the overlay grille panel. The decorative panel cannot be any larger or it may restrict the air flow to the compressor area and cause problems with the operation of the unit.

Dimensions in parentheses are in millimeters unless otherwise specified.

8

Planning Information

Built-In Model 642

W

H

H

W W

Overlay Door Panels

Overlay Grille Panel

O V E R L A Y P A N E L S

An 11" (279) panel grille is standard on overlay applications. Optional panel grilles are available in 1" (25) height increments from 10" (254) to 15" (381).

O V E R L A Y P A N E L D I M E N S I O N S

WIDTH HEIGHT

Refrigerator Door Panel

Refrigerator Door Spacer

Refrigerator Door Backer

Freezer Door Panel

Freezer Door Spacer

Freezer Door Backer

24

5

/

16

" (618)

15

15

/

16

" (405)

Maximum Weight (per panel assembly)

68" (1727)

23

3

/

8

" (594) 67

1

/

16

" (1703)

24" (610) 67

11

/

16

" (1719)

68" (1727)

15" (381) 67

1

/

16

" (1703)

15

5

/

8

" (397) 67

11

/

16

" (1719)

50 lbs (23 kg)

O V E R L A Y G R I L L E P A N E L D I M E N S I O N S

10" (254) Grille Panel

10" (254) Grille Spacer

10" (254) Grille Backer

11" (279) Grille Panel

11" (279) Grille Spacer

11" (279) Grille Backer

12" (305) Grille Panel

12" (305) Grille Spacer

12" (305) Grille Backer

13" (330) Grille Panel

13" (330) Grille Spacer

13" (330) Grille Backer

14" (356) Grille Panel

14" (356) Grille Spacer

14" (356) Grille Backer

15" (381) Grille Panel

15" (381) Grille Spacer

15" (381) Grille Backer

WIDTH

40

7

/

16

" (1027)

39

1

/

2

" (1003)

40

1

/

8

" (1019)

40

7

/

16

" (1027)

39

1

/

2

" (1003)

40

1

/

8

" (1019)

HEIGHT

9

1

/

4

" (235)

8

5

/

16

" (211)

8

15

/

16

" (227)

10

1

/

4

" (260)

9

5

/

16

" (237)

9

15

/

16

" (252)

40

7

/

16

" (1027)

39

1

/

2

" (1003)

11

10

5

1

/

4

" (286)

/

16

" (262)

40

1

/

8

" (1019) 10

15

/

16

" (278)

40

7

/

16

" (1027)

39

1

/

2

" (1003)

12

11

5

1

/

4

" (311)

/

16

" (287)

40

1

/

8

" (1019) 11

15

/

16

" (303)

40

7

/

16

" (1027)

39

1

/

2

" (1003)

13

12

5

1

/

4

" (337)

/

16

" (313)

40

1

/

8

" (1019) 12

15

/

16

" (329)

40

7

/

16

" (1027) 14

1

/

4

" (362)

39

1

/

2

" (1003) 13

5

/

16

" (338)

40

1

/

8

" (1019) 13

15

/

16

" (354)

Dimensions in parentheses are in millimeters unless otherwise specified.

9

Planning Information

Built-In Model 642

S I D E P A N E L S

13

1

/

4

"

(337)

1

/

4

"

(6)

23

7

/

8

"

(606)

BEHIND FRAME

1

1

/

4

"

(6)

4"

(102)

3"

(76)

3"

(76)

Cut-outs for grille and toe kick area

S I D E P A N E L S

Side panels can be used with the framed, overlay and stainless steel design applications. When planning for side panels with the installation of the Built-In model, you need to be aware of space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel will vary.

Cut-outs around the toe kick and grille area are required if a

1

/

4

" (6) thick panel will be inserted into the main frame channel. The panel will need to be 24" (610) deep. Refer to the illustration on this page for placement of toe kick and grille area cut-outs. If a

3

/

8

" (10) thick panel is used, the panel will abut the main frame and should be 23

7

/

8

" (606) deep. The toe kick area may or may not be cut out depending on the look you want to achieve.

IMPORTANT NOTE: The use of side panels may change the width of your rough opening.

H A R D W A R E C O N S I D E R A T I O N S

Overlay models come without handle hardware. The beauty of this design is that you can match the surrounding cabinet hardware. You or the cabinet manufacturer must provide handle hardware to match the overall decorating scheme.

The handle hardware must be installed before installing the panel assembly. Use larger D-style handles. If screws with thick heads are used, the screws will need to be countersunk into the door before the panel is put into place. Refer to the full-scale illustrations on pages 11–12 for handle hardware considerations.

IMPORTANT NOTE: Sub-Zero does not recommend using single pull knobs on any of its Built-In models.

Optional stainless steel handles are available in a variety of diameters and lengths in the classic, platinum and carbon stainless steel finishes and polished chrome. Contact your Sub-Zero dealer for specifics. To obtain local dealer information, visit the Locator section of our website, subzero.com.

Dimensions in parentheses are in millimeters unless otherwise specified.

10

Planning Information

Built-In Model 642

H A N D L E P R O F I L E – F R A M E D A P P L I C A T I O N

OPTIONAL

EXTENDED

FULL-LENGTH

HANDLE

STANDARD

FULL-LENGTH

HANDLE

1"

(25)

2"

(51)

1

/

4

"

(6)

FRAMED PANEL

3"

(76)

1

1

/

4

"

(32) PANEL

1"

(25) PANEL

3

/

4

"

(19) PANEL

1

/

2

"

(13) PANEL

1

/

4

"

(6) PANEL

DOOR

F U L L - S C A L E T E M P L A T E S

The following full-scale illustrations enable you to understand some of the unique situations you may face as you design the Built-In units into homes. These templates can be easily photocopied or used in your tracings.

H A N D L E P R O F I L E

The full-scale illustration above shows handle placement for the framed application standard full-length handle and the optional extended full-length handle shown in the dashed line.

Dimensions in parentheses are in millimeters unless otherwise specified.

11

Planning Information

Built-In Model 642

H A N D L E P R O F I L E – S T A I N L E S S S T E E L / O V E R L A Y A P P L I C A T I O N S

STANDARD STAINLESS STEEL HANDLE

1"

2"

(51)

3"

(76)

1

1

/

4

"

(32) PANEL

1"

(25) PANEL

3

/

4

"

(19) PANEL

5

/

8

"

(16) PANEL

1

/

2

"

(13) PANEL

1

/

4

"

(6) PANEL

1

/

4

"

(6) APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR

DOOR

NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE

MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.

P A N E L A N D H A N D L E P R O F I L E

The full-scale illustration above shows handle placement for the standard stainless steel handle on the wrapped stainless steel door and on overlay panel applications shown in the dashed line.

IMPORTANT NOTE: For overlay applications, the optional stainless steel handle must be mounted on a panel at least

5

/

8

" (16) thick.

For overlay applications, mount door handles close to the opening edge of the door for ease of opening.

Dimensions in parentheses are in millimeters unless otherwise specified.

12

Planning Information

Built-In Model 642

P A N E L A N D H A N D L E P R O F I L E – 1 3 0 ˚ D O O R O P E N I N G

SUB-ZERO UNIT

130˚ DOOR OPENING

WITH 2" (51) FILLER STRIP

(TOP VIEW)

SUB-ZERO UNIT

DOOR CLOSED

FILLER STRIP

2"

(51)

ALLOW FOR FILLER LAP

BEHIND FLANGE

MAIN FRAME

OVERLAY PANEL

3/4" (19) THICK

(NOMINAL)

HINGE

APPROX

PROFILE OF

STAINLESS

STEEL DOOR

AND HANDLE

STANDARD

FRAMED

FULL-LENGTH

HANDLE

1

1

/

4

"

(3

2)

PA

N

E

L

1"

(2

5)

3

/

4

"

PA

N

E

L

(1

9)

PA

N

E

L

PA

N

E

L

1

/

2

"

(1

3)

*

1

/

4

"

(6

)

PA

N

E

L

OPTIONAL

FRAMED EXTENDED

FULL-LENGTH HANDLE

DOOR OPEN @ 130˚

The full-scale illustration above shows the panel and handle profile of a 130˚ door opening with

2" (51) filler strip for framed applications.

Interference of door panels with handles at maximum door swing may require the use of an optional 90˚ door stop available through your

Sub-Zero dealer.

*Approximate thickness of wrapped stainless steel door.

Dimensions in parentheses are in millimeters unless otherwise specified.

To obtain local dealer information, visit the

Locator section of our website, subzero.com.

The full-scale illustration on the following page lets you see what considerations you need to make for any overlay panel applications, and how they may interact with adjacent cabinets and/or countertops.

13

0"

(0)

1

/

4

"

(6)

1

/

2

"

(25)

3

/

4

"

(19)

1"

(25)

1

1

/

4

"

(32)

1

1

/

2

"

(38)

1

3

/

4

"

(44)

2"

(51)

2

1

/

4

"

(57)

2

1

/

2

"

(63)

2

3

/

4

"

(70)

3"

(76)

3

1

/

4

"

(83)

3

1

/

2

"

(89)

Planning Information

Built-In Model 642

O V E R L A Y P A N E L A P P L I C A T I O N – 9 0 ˚ D O O R O P E N I N G

90˚ DOOR OPENING

(TOP VIEW)

NOMINAL OVERALL

WIDTH OF SUB-ZERO

SUB-ZERO UNIT

23

7

/

8

"

(606) TO REAR

OF SUB-ZERO

MAIN FRAME

HINGE

DOOR OPEN @ 90˚

DOOR CLOSED

OVERLAY PANEL

3/4" (19) THICK (NOMINAL)

*Approximate thickness of wrapped stainless steel door.

Dimensions in parentheses are in millimeters unless otherwise specified.

14