advertisement
Hetronic Wireless Foot and Hand Controls
Issued Aug. 2011 • Index No. AY/6.6
Wireless Remote Hand Control
Wireless
Controls
Quick
Specs
Industrial Applications
Construction
Manufacturing
Fabrication
Plant Maintenance
Processes
Stick (SMAW)
TIG (GTAW)
Pulsed TIG (GTAW-P)
Flux Cored (FCAW)*
MIG (GMAW)*
*Only with Voltage-Sensing Feeder.
Operating Range
300 ft (91 m)
Communication
2.4 Ghz Radio Frequency (ISM Band)
Input Power
Transmitter: (3) AA Batteries
Receiver: Miller 14-Pin Receptacle
Weight
0.8 lb (0.4 kg)
The Power of Blue .
®
Improves safety by eliminating control cord and reducing potential trip hazard.
Improves weld quality. Operators can easily adjust their machines to optimize the parameters for different joint configurations, electrodes, and wire types and sizes.
Reduces maintenance time and
cost. No cord repairs.
Improves productivity by allowing parameter adjustments up to
300 ft away from welder without returning to the machine or calling for assistance.
Easy-to-install receiver plugs directly into the 14-pin receptacle of
Miller machines. See chart on pg. 2.
Easily programmable. The Wireless
Remote Hand Control can be quickly and easily paired with any other
Miller 14-pin wireless receiver.
Comes Complete with:
Wireless hand control transmitter
Wireless 14-pin receiver
Battery box with three
AA batteries
Belt clip
Owner’s manual
Smart Touch ™ buttons increase or decrease machine parameters in
1% or 5% increments, for quick and accurate adjustments.
Multiple frequency sharing allows up to 20 systems to operate in a
90-ft (27.4 m) radius with accuracy and precision — and without delay, system interference, or crosstalk.
Digital meter display allows presetting percentage of machine output before welding, and viewing amperage and voltage while welding.
High-visibility color makes hand control easy to locate on the job site.
Warranted for 1 year, parts and labor.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Web Site www.MillerWelds.com
Specifications
(Subject to change without notice.)
Component
Hand Control
(Transmitter)
Power
Supply
(3) AA
Batteries
Rated Range*
300 ft (91 m)
Battery Life
250 hrs
Temperature
-13˚F to +158˚F
(-25˚C to +70˚C)
Radio
Frequency
2.4 Ghz
(ISM Band)
RF Power
<3 mW
Antenna
Internal
Dimensions
H: 5 in (127 mm)
W: 2-3/4 in (70 mm)
D: 1-3/8 in (35 mm)
D: 3-1/2 in (89 mm)
Dia: 1-1/2 in (38 mm)
Weight
0.6 lb (0.27 kg) w/Batteries
14-Pin
Receiver
10 – 35 V
AC or DC
N/A 0.16 lb
(0.07 kg)
*Some applications are not suitable for wireless communication. Keep in mind that the rated range is subjective, and depends on factors such as obstructions, frequency interference, transmission technology, and weather. The figures listed assume ideal conditions are present.
FCC ID: LW9-Miller-HC (hand control) and LW9-Miller-RX (receiver) Canada IC: 2119B-MillerHC (hand control) and 2119B-MillerRX (receiver)
Recommended Machines
The Wireless Remote Hand Control is recommended with the following Miller power sources:
Maxstar ® 200 1 /350/700
Dynasty ® Series
Gold Star ® Series
CST ™ 280
XMT ® Series
Dimension ™ Series
CST ™ 280 Rack
XMT ® 304 and 350 Rack
Trailblazer ® 275/302
2
Big Blue ® 300 Pro 3
Miller Du-Op ®
Big Blue ® 350 PipePro ®3
Big Blue ® 400 Eco Pro 3
Note: If your machine is not listed, visit
MillerWelds.com/wireless to check compatibility.
1
Excludes Maxstar ® 200 STR
2
Excludes XMT ® 350 VS
3
Requires Wireless Antenna Kit #300 749
Control Panel
3
4
1
2
1. Output ON LED Indicator
2. Digital Display
3. Increase Button
4. Decrease Button
5. Display Screen Button
(P=%, A = Amps, V= Volts)
6. Output Contactor On/Off
5
6
Genuine Miller Parts
Battery Box
Belt Clip
Belt Clip #249 233
Replacement clip allows convenient attachment of the control to your belt.
(Order from Miller Service Parts.)
Battery Box #249 297
Replacement quick-change battery box for easy, no-tool battery change.
(Order from Miller Service Parts.)
Ordering Information
Equipment
Wireless Hand Control and 14-Pin Receiver
Wireless Hand Control
Wireless 14-Pin Receiver
Parts and Accessories
Belt Clip
Battery Box
Adapter Cord (for Maxstar 150)
Wireless Antenna Kit
Stock No.
#300 430
#300 723
#300 722
#249 233
#249 297
#300 507
#300 749
Description
System
Sold individually
Sold individually
Replacement. Order from Miller Service Parts
Replacement. Order from Miller Service Parts
6-pin male, 14-pin female. 1 ft (0.3 m) long
Required for Pro series engine drives. Optional on other compatible Miller products where improved reception is desired
Total Quoted Price: Date:
Qty. Price
Distributed by:
Litho in USA
Issued Oct. 2010 • Index No. AY/6.5
Wireless Remote Foot Control
Wireless
Controls
Quick
Specs
Industrial Applications
Manufacturing
Fabrication
Plant Maintenance
Processes
TIG (GTAW)
Pulsed TIG (GTAW-P)
Operating Range
90 ft (27.4 m)
Communication
2.4 Ghz Radio Frequency (ISM Band)
Input Power
Transmitter: (3) AA Batteries
Receiver: Miller 14-Pin Receptacle
Weight
3.16 lb (1.43 kg)
The Power of Blue .
®
Improves productivity and
maneuverability by eliminating cord tangles. Reduces clean up time and work area cord clutter.
Improves safety by eliminating control cord and reducing potential trip hazard.
Improves reliability by eliminating control cord failure.
Multiple frequency sharing allows up to 20 systems to operate in a 90-ft (27.4 m) radius with accuracy and precision — and without delay, system interference, or crosstalk.
Auto On feature extends the battery life up to 250 hours of welding without turning the pedal on and off.
Easy-to-install receiver plugs directly into the 14-pin receptacle of Miller machines.
Comes Complete with:
Foot control with wireless transmitter
14-pin wireless receiver
Battery box with three
AA batteries
Four Easy-Glide
Wear Pads ™
Owner’s manual
Easily programmable. The
Wireless Remote Foot Control can be quickly and easily paired with any other Miller
14-pin wireless receiver.
(Control is preprogrammed when purchased with the receiver.)
Easy-Glide Wear Pads ™ glide across concrete, making it easy to reposition the pedal for comfort and speed.
Warranted for 1 year, parts and labor.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Web Site www.MillerWelds.com
Specifications
(Subject to change without notice.)
Component
Foot Control
(Transmitter)
Power
Supply
(3) AA
Batteries
Rated Range*
90 ft (27.4 m)
Battery Life
250 hrs
Temperature
-13˚F to +158˚F
(-25˚C to +70˚C)
Radio
Frequency
2.4 Ghz
(ISM Band)
RF Power
<3mW
Antenna
Internal
Dimensions
H: 6 in (292 mm)
W: 5-3/4 in (146 mm)
D: 11-1/2 in (152 mm)
D: 3-1/2 in (89 mm)
Dia: 1-1/2 in (38 mm)
Weight
3 lb (1.4 kg) w/Batteries
14-Pin
Receiver
10 – 35 V
AC or DC
N/A 0.16 lb
(0.07 kg)
*Some applications are not suitable for wireless communication. Keep in mind that the rated range is subjective, and depends on factors such as obstructions, frequency interference, transmission technology, and weather. The figures listed assume ideal conditions are present.
FCC ID: LW9-Miller-FC (foot control) and LW9-Miller-RX (receiver) Canada IC: 2119B-MillerFC (foot control) and 2119B-MillerRX (receiver)
Recommended Machines
The Wireless Remote Foot Control is recommended with following Miller power sources:
Dynasty ® 200 SD and DX
Dynasty ® 350
Dynasty ® 700
Maxstar ® 150 STL and STH*
Maxstar ® 200 SD, DX and LX
Maxstar ® 350
Maxstar ® 700
Syncrowave ® 250 DX
Syncrowave ® 350 LX
*Adapter cord required. See Ordering
Information below.
Note: If your machine is not listed, visit
MillerWelds.com/wireless to check compatibility.
Genuine Miller Parts and Accessories
Easy-Glide Wear Pad ™ #248 274
Replacement pads are sold individually.
(Order from Miller Service Parts.)
Battery Box #249 297
Replacement quick-change battery box for easy, no-tool battery change.
(Order from Miller Service Parts.)
Ordering Information
Equipment and Options
Wireless Foot Control and 14-Pin Receiver
Wireless Foot Control
Wireless 14-Pin Receiver
Parts and Accessories
Easy-Glide Wear Pad ™
Battery Box
Adapter Cord (14-pin for Maxstar 150)
Date:
Stock No.
#300 429
#300 724
#300 722
#248 274
#249 297
#300 507
Description
System
Sold individually
Sold individually
Replacement pad sold individually. Order from Miller Service Parts
Replacement part. Order from Miller Service Parts
Required for Maxstar 150 STL and STH
Total Quoted Price:
Qty. Price
Distributed by:
Litho in USA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement