User's manual | IRENIS HDE IPTV Network Encoder User’s Manual

Add to My manuals
36 Pages

advertisement

IRENIS HDE IPTV Network Encoder User's Manual | Manualzz

IPTV Network Encoder HDE

IPTV Streamer, Encoder, Recorder & Player

HDMI / YPbPr / S-Video / AV / USB to IPTV

User’s Manual

IRENIS HDE IPTV Network Encoder User’s Manual

Thank you for choosing our IRENIS HDE IPTV Streamer, Encoder, Recorder & Player (Network Encoder).

Please read this manual carefully to install, use and maintain the network encoder in the best conditions of performance. Keep this manual for future reference.

Directory

CHAPTER 1 Product Introductions .......................................................................... 1

General Description ................................................................................................ 1

System Connection Samples ................................................................................... 2

Key Features ............................................................................................................ 2

Technical Specifications ........................................................................................... 2

CHAPTER 2 Safety Instruction and Installations ...................................................... 4

Safety Instructions ................................................................................................... 4

Installations ............................................................................................................. 4

CHAPTER 3 Operations of TS Creator Software ....................................................... 7

Installation ............................................................................................................... 7

Operations of “Creator” .......................................................................................... 7

File Management .................................................................................................... 9

CHAPTER 5 Operations of Record TS and Play TS through USB Disk ..................... 16

CHAPTER 6 Operations of Web-GUI ...................................................................... 19

Login ...................................................................................................................... 19

Operation .............................................................................................................. 20

Chapter 7 Network Connection and Setup ........................................................... 29

Situation 1: LAN network ...................................................................................... 29

Situation 2: WAN network..................................................................................... 31

1 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 1 Product Introductions

General Description

This IRENIS HDE IPTV Network Encoder is an encoding device for IP broadcasting. The signals source could be from STB, PC, TV and etc. It can transfer the live program through the internet/LAN, and the output signals are to be received by PC, phone and other mobile terminals.

This device lets you access your IP STB, PC or TV anywhere to watch your programs. Whether you are in your house or across the globe, you'll never miss a game or your favorite show.

The device supports HDMI/YPbPr/S-Video/AV/USB input and encodes in MPEG-4 AVC/H.264 format, after that, it gives the IP signal output over UDP (multicast/unicast), RTP/RTSP, HTTP or

HLS.

The USB port is designed to record and save the encoded video (TS) in ts files in the USB Keys or

Hard Disks and play it back through IP out to increase your content options.

1 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

System Connection Samples

Key Features

Watch and control your live and recorded TV shows anywhere, anytime –up to

Full HD

Supports HDMI/YPbPr/S-Video/AV/USB input

Supports IP Output over UDP (unicast/multicast), RTP/RTSP, HTTP, HLS

Absolutely no monthly fees

Easy to connect and set up

HLS Protocol supporting 6-10 Apple terminals simultaneously running as per different resolution and bit rate setting

USB port for TS recording and playing back, increase signal source option

Technical Specifications

Encoder

Section

Resolution

1920x1080_60p, 1920x1080_50p

1920x1080_60i, 1920x1080_50i

1280x720_60p, 1280x720_50p

Video

HDMI input

Encoding

Bit rate

MPEG-4 AVC/H.264

1Mbps~19Mbps

Encoding MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC

Sample rate 48KHz Audio

Bitrate

YPbPr/CVBS/S-Video Video Encoding

64, 96, 128, 192, 256, 320, 384kbps

MPEG-4 AVC/H.264

2 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

(with an adapter to Interface CVBS *1, YPbPr*1, S-Video*1

VGA)

CVBS & S-Video:

Resolution

720x576_50i (PAL); 720x480_60i (NTSC)

YPbPr:

1920*1080_60i, 1920*1080_50i;

1280*720_60p, 1280*720_50P

Audio

Bit rate 64, 96,128, 192, 256, 320, 384kbps

Stream out

IP out over UDP (unicast/multicast), RTP/RTSP, HTTP, HLS (RJ45, 1000M)

Local control

Remote control

System

LCD + control buttons

Web-server NMS

Language

Upgrade

Chinese-English control interface

USB/Web-server

≤1Kg

Bit rate

Encoding

1Mbps~19Mbps

MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC

Interface 1*Stereo /2*mono

Sample rate 48KHz

General

Approx weight

Operation temperature

Power supply

Dimensions

0~45℃

DC12V

183*110*45mm

3 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 2 Safety Instruction and Installations

Safety Instructions

WARNING: Hot plug is not allowed since it may cause system halted.

To prevent fire or electrical shock, do not expose the device to rain or moisture.

The network encoder is powered with a voltage of 12V DC. The power supply voltage must not exceed the recommended voltage, which otherwise may cause irreparable damage to the device and the invalidation of the warranty. Therefore:

Do not replace power supply with a voltage greater than 12V DC.

Do not connect the device to the power if the power cord is damaged.

Do not plug the device into mains supply until all cables have been connected correctly.

Do not cut the cord.

Avoid placing the device next to central heating components and in areas of high humidity.

Do not cover the device with elements that obstruct the ventilation slots.

If the IRENIS HDE Network Encoder has been kept in cold conditions for a long time, keep it in a warm room minimum 2 hours before plugging into the mains.

Mount the device in vertical position with the connectors located on the top side.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutes may result in fire, electric shock or other hazards.

Safety check- Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the device is in proper condition.

Installations

RISK OF damage to the unit

Mechanically handling the unit may result in damage. Do not connect the unit to the

4 / 34

IRENIS HDE IPTV Network Encoder User’s Manual power supply before or during assembly. Connect the unit as below instructed.

NO HOT PLUG!

1. Mount and tighten the screws and plugs to secure the unit to the wall. Left 10 cm

1 of free space around from each unit.

2. Connect the signal input in the respective connectors. The signal source can be from a surveillance monitor, DVD, set-top box, CCTV and etc.

3. In case of connecting to a wired network, connect the encoder

Ethernet port

5

3 and terminal's

Ethernet port wiht ethernet

2 cable.

4. In case of connecting wireless network, following Step 2, connect the encoder Ethernet port and router port with Ethernet cable.

5. Power supply connection: a) Connect the earth cable; b) Connect the power plug to the unit mains connector; c) Connect the power plug to the mains socket.

4

5 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

TS Creator.exe Download link:

http://www.irenis.com/downloads/TScreator_1.1.7.22.zip

Download path: English→Tool→TS Creator xxx.rar

6 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 3 Operations of TS Creator Software

IRENIS HDE Network Encoder has a function to create TS videos with the software supplied with the product. Users can create *.ts files containing images, videos and audios in a simple and intuitive way, and play them on a television through this device’s

USB port.

File format supported include:

Image: JPG, PNG, BMP, GIF/Video: MP4, WMV, AVI, MPG, TS, MKV… /Audio: MP3, WAV

Installation

1. Download our “TS Creator” software package on your PC to get the installer and its auxiliary routine.

2. Occasionally, if your PC hasn’t installed “Net Frame 2.0” yet, double-click

“NetFx20SP2_x86.exe” until complete the installation.

3. Double-click “Setup.exe” application to install the “Creator” and generate a desktop shortcut.

Operations of “Creator”

Double-click the “Creator” shortcut icon below:

, it will trigger an operation interface like

7 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Click to add Images and videos

Click to adjust the order of Images/videos

Click to delete the Images/videos

Click to add audios

Click to set a save path for the TS video to be created.

To set time duration for every picture when playing the video

To set the resolution for the output video

The video is transformed based on VBR (Variable

Bit Rate). The number set here represents the highest bit rate for the output video and

8 / 34

IRENIS HDE IPTV Network Encoder User’s Manual bit rate will varies under the number.

Users can select H.264 encode format here.

NOTE: If you are to apply HLS as the output stream protocol, you need choose

H.264 here as HLS supports only H.264 Video format.

Users can filter the null packet to boost the video’s effect bit rate.

A single video can be maximum 2.0 GB in size.

(IRENIS HDE Network Encoder cannot play a video bigger than 2GB.)

After setting all the parameters, click to start the transformation. Click “OK” when it prompts “The operation completed normally.” completed.

Click this button to stop the transformation before the operation

After finishing the transform operation, users can click this button to play the generated TS video.

File Management

After finishing the transformation, users can find out the videos files generated according the Saving Directory. For example, we save the video in “D:\ABC” so we can find it in Disk D\Folder ABC.

Management:

1. Three files will be generated if the Null Packet has been filtered.

TS video for preview through the “Creator” interface by clicking “Play” button

TS video and information files: Users need to save the two files together in the USB memory, and then this device can read them and play the video.

2. Two files will be generated if the Null Packet has not been filtered.

TS video for preview through the “Creator” interface by clicking “Play” button

TS video: Users need to save it in the USB memory, and then NDS3558A can read it and play the video.

Remarks:

All the file names are automatically generated.

Rename the files before creating a new video to avoid covering the previous files.

If you rename “FinalOutput-204-0.ts” or “FinalOutput-204-0.tsinfo”, always keep

9 / 34

IRENIS HDE IPTV Network Encoder User’s Manual the names the same (Extension excluded) and then this network encoder can read them and play the video.

10 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 4 Devices Operations and Management

IRENIS HDE Network Encoder is controlled and managed through the key board and

LCD display.

LCD Display – It presents the selected menu and the parameter settings. The backlight in the display is on when the power is applied.

LED Indicators – These lights indicate the working status

Power: It lights on when the power supply is connected.

Alarm: It lights on when the there is error, such as the signal source loss.

USB: It lights on when the USB device is properly connected and blocks out when the USB device get removed.

Left/Right/Up/Down buttons – Use these buttons to turn the screen pages, shift the target items by moving the triangle, or change the parameter settings in the program mode.

Enter – Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting the value of certain items when the corresponding underline flash with Up and Down buttons;

Hue

1

Enter

Hue

+001

Hue

+001

► ►

Hue

+002

Press it to activate the hidden selections and change the setting with Up and Down (or

Left and Right) buttons.

Audio Bit rate

128

Enter

Audio Bit rate

*128

Enter

Audio Bit rate

►128

► ►

Audio Bit rate

►192

Menu – Press this button to step back

Lock – Locking the screen / cancelling the lock state, and entering the main menu after the initialization of the device. After pressing lock key, the system will question the users to save present setting or not. If not, the LCD will display the current configuration state.

11 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

When the power is connected, the LCD will start to initialize the program. The LCD menu goes as below chart.

12 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Initializing

Network Encoder

..Input=Lock Encoder..

1

Up Down Enter Menu Lock

Main Menu

Status

Main Menu

Encoder

Main Menu

USB Device

Main Menu

Network Config

Status

Alarm

Status

Uptime

Encoder

Video

Encoder

Audio

Encoder

Program Info

USB Device

Record TS

USB Device

Play TS

USB Device

Disk Usage

USB Device

Update

USB Device

Connect device

USB Device

Remove device

Network Config

IP Address

Network Config

Subnet Mask

Network Config

Gateway

Network Config

Web Port

Network Config

MAC Address

2

3

Video

Interface

Video In Status

Resolution

Vedio Bit Rate

Rate Mode

H.264 Profile

H.264 Level

Brightness

Contrast

Saturation

Video Normal

Audio

Audio Bitrate

Audio Format

Program Info

Program Name

Provider Name

Service ID

PMT PID

PCR PID

Video PID

Audio PID

Record TS

Record Start

Advanced Config

Play TS

Play Start

Advance Config

Disk Usage x.xxxG/x.xxxG

Update

[FPGA]

9

10

4

5

6

7

8

11

Yes

12

Yes

IP Address xxx.xxx.xxx.xxx

Subnet Mask xxx.xxx.xxx.xxx

Gateway xxx.xxx.xxx.xxx

Web Port xxxx

MAC Address xxx.xxx.xxx.xxx

13

14

15

16

17

13 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Main Menu

System

System

Save Config

Save Config?

Yes

►No

18

System

Load Saved CFG

Load SavedCFG?

Yes

►No 19

System

Factory Reset

20

System

LCD Time-out

System

Product ID

Reset all sets?

Yes

►No

LCD Time-out

►30 s xxxxxxxxxxxxxx xxxxxxxxxxxxxx

21

22

System

Version Number

Version Number

SW:1.6 HW:A.20

23

Main Menu

IP Stream

IP Stream

Program Name

IP Stream

HTTP&RTSP

Program Name

Program 1

HTTP&RTSP

HTTP/RTSP Enable

HTTP/RTSP Port

24

25

IP Stream

UDP

UDP

UDP Enable

UDP Port

26

IP Stream

HLS

HLS

HLS Enable

HLS Port

27

1) Network Encoder; Input=Lock; Encoder Rate=x.xxMbps; Valid Rate=x.xxMbps;

Max Rate=x.xxMbps.

2) Alarm Status: For example, if the signal cable disconnected, it will display Input

UnLock under this menu.

3) Uptime: It displays the working time duration of the device. It times upon power on.

4) Video Parameters: User can enter the items respectively to set video parameters.

Interface: select a right interface type from the options provided. The device then can automatically search the signal and starts to encode. Resolution: signal source resolution, read-only. Video Bit rate: adjust in range of 1.000~19.000 Mbps. Rate

Mode: this unit user can choose CBR or VBR. User can also adjust values of rest items (H.264 profile, H.264 level, Brightness: 0-128 & Contrast: 0-255 & Saturation:

0-128; Hue: -128 - +127; Video Normal)

5) Audio Bit rate: Select audio bit rate from the options provided: 64, 96, 128, 192,

256, 320, 384kbps.

Audio Format: Select audio format among MPEG2, MPEG2-AAC and MPEG4-AAC.

14 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

NOTE: If you are to apply HLS as the output stream protocol, you need choose

MPEG2-AAC here, as HLS supports only MPEG2-AAC Audio format.

6) Program Information: User can enter the sub-menus to edit the Program Name,

Provider Name, Service ID, and PIDs of PMT, PCR, Video and Audio.

7) – 12) Please refer to Chapter 5 for details.

13) IP Address: To configure IP address here.

14) Subnet Mask: To configure subnet mask here.

15) Gateway: To configure gateway here.

16) Web Port: To configure web port here.

17) MAC Address: To view MAC address here.

18) Save Config: Yes/No-to save/give up the adjustment of setting.

19) Load Saved CFG: Yes/No-to load/ not to load the saved configuration.

20) Factory reset: Yes/No-choose/not choose the factory’s default configuration.

21) LCD Time out: Set the time limit that LCD will light off.

22) Product ID: User can view the serial number of this device. It is read-only and unique

23) Version: It displays the version information of this device.

24) Program name: Set the program name of the IP output stream.

25) – 27) HTTP/RTSP/UDP/HLS: User can choose the output protocol and output port at this interface.

15 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 5 Operations of Record TS and Play TS through USB Disk

IRENIS HDE Network Encoder has functions of:

1. *.ts Video Creation

See Chapter 3.

2. TS Record and Save

Main Menu

USB Device

USB Device

Record TS

Record TS

Record Start

Record TS

Advanced Config

Record mode select

►Single File

Segment File

Loop Record

Advanced Config

File name

File size

Data Mode

Start Record Stop Record

1) Connect the signal source, enter “Record Start” and then choose one record mode to start recording the encoded TS. And, press UP key and then Enter key to stop recording.

There are 3 record modes provided:

“Single file”: For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically stops recording TS.

“Segment file”: For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically saves the files and continues to record

TS and save it to next file until the USB memory is full.

“Loop record”: It automatically saves the files and continues to record TS and save it to next file. When the USB memory is full, it replaces the previous file.

2) Advanced Config:

File Name: Users can enter this menu to edit name for the *.ts files to be recorded.

For example, if users name it “Record-”, it will give name to the saved *.ts files

“Record-001.ts”, “Record-002.ts”… “Record-00N.ts”.

File Size: users can set the file size for the *.ts to be recorded. A single file can be maximum 2048M in size.

16 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Data Mode: There are 3 data modes:

Mode 1 (The ts files will be saved in 188-byte packages with null packet embedded.);

Mode 2 (The ts files will be saved in 188-byte packages with null packet filtered.

However, such ts files cannot be normally played with this device, but can be played on PC with some media player such as VLC.);

Mode 3 (The ts files will be saved in 204-byte packages with null packet filtered.).

3. TS Playback

Main Menu

USB Device

USB Device

Play TS

Play TS

Play Start

Play mode select

►Play one

Play one loop

Play all

Play all loop

File select

▼ xxx1.ts

xxx2.ts

Playing

Play TS

Advanced Config

Auto Mode On [Off]

1) Play Start:

User can select a play mode for the *.ts files as needed before playing the *.ts file and specify a video under ‘Play one’ / ‘Play one loop’ mode and press “Enter” button to start play. While under ‘Play all’ / ‘Play all loop’ mode, it automatically plays files from first to end.

2) Advanced Config:

Auto Mode is for saving the play mode for the device. When the auto mode is enabled, the device will automatically apply the play mode set before the power cut off and output ts files stored in the USB device through RF. While the auto mode is off, the device will play the encoded TS through RF when the power is connected.

4. Disk Usage

Main Menu

USB Device

USB Device

Disk Usage

Disk Usage

xx.xxG/x.xxG

Users can enter this menu to view the USB disk’s capacity left.

5. Update

Main Menu

USB Device

USB Device

Update

Updatee

►PFGA

17 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Choose one item to be updated and press Enter to confirm. Keep the update file stored in the USB device in *.dxf format.

6. Connect Device

Main Menu

USB Device

Press Enter key to re-connect the USB disk.

7. Remove Device

USB Device

Connect device

Main Menu

USB Device

USB Device

Remove device

Press Enter key to safely remove the USB disk. This network encoder will then automatically resume encoding process and playing the program input from the encoder module.

18 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

CHAPTER 6 Operations of Web-GUI

In addition to using front buttons to control the IRENIS HDE Network Encoder and USB device, users can also perform the same operation in an easier way with the web

Brower in the PC (Personal Computer).

Login

The default IP address of this device is 192.168.0.136. (You can modify the IP through the front panel.)

Connect the PC and the network encoder with a net cable, and use ping command to confirm they are on the same network segment.

I.G. the PC IP address is 192.168.99.252, we then change the device IP to

192.168.99.xxx (xxx can be 1 to 254 except 252 to avoid IP conflict).

Use web browser to connect the device with PC by inputting the device’s IP address in the browser’s address bar and press Enter.

It will display the Login interface as Figure-1. Input the Username and Password (Both the default Username and Password are “admin”.) and then click “OK” to start the device setting.

Figure-1

19 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Operation

Summary:

When we confirm the login, it displays the WELCOME interface as Figure-2 where users can have an overview of the device’s system information and working status.

System information

Input information and encoding working status.

User can click any item here to enter the corresponding interface to check information or set the parameters.

Alarm Area: Green light indicates the corresponding item is in normal status.

Otherwise the light is red.

Figure-2

Parameters → Encoder:

From the menu on left side of the webpage, clicking “Encoder”, it displays the interface where users can configure the encoding parameters for the input video/audio.

(Figure-3)

20 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Select an interface according to the signal source user connects and intends to encode.

For configuring

CVBS signal only

Figure-3

Parameters → IP Stream:

Click “IP Stream” from the left menu, it will display the screen as Figure-4 where to configure the IP Output.

After setting the parameters, click “Apply” to save the setting.

21 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

This device supports IP output over UDP

(Unicast/multicast), RTP/RTSP, HTTP, and

HLS.

User can choose the output protocol.

Figure-4

Parameters → USB:

From the menu on left side of the webpage, clicking “USB”, it displays the interface where users can operate USB device. (Figure-5)

To stop USB device recording or playing TS

For reading USB device status

1. Configure TS file parameters and click

‘set’ to start recording.

2 Click ‘stop’ to stop recording TS and the playing section below is available to operate.

1 Configure TS playing parameters and click ‘set’ to start playing TS files.

2 Click ‘stop’ to stop playing TS and the recording section above is available to operate.

Figure-5

22 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

NOTE: It is necessary to connect USB device and signal source and activate encoding to operate TS recording.

NOTE: It is necessary to connect USB device when operate TS playing.

Detailed Explanation:

There are 3 record modes provided: s

“Single file”: For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically stops recording TS.

“Segment file”: For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically saves the files and continues to record TS and save it to next file until the USB memory is full.

“Loop record”: It automatically saves the files and continues to record TS and save it to next file. When the USB memory is full, it replaces the previous file.

Advanced Config:

File Name: Users can enter this menu to edit name for the *.ts files to be recorded.

For example, if users name it “Record-”, it will give name to the saved *.ts files

“Record-001.ts”, “Record-002.ts”… “Record-00N.ts”.

File Size: users can set the file size for the *.ts to be recorded. A single file can be maximum 2G in size.

Data Mode: There are 3 data modes:

Mode 1 (The ts files will be saved in 188-byte packages with null packet embedded.);

Mode 2 (The ts files will be saved in 188-byte packages with null packet filtered.

However, such ts files cannot be normally played with this device, but can be played on PC with some media player such as VLC.);

Mode 3 (The ts files will be saved in 204-byte packages with null packet filtered.).

Playing Auto Mode:

Auto Mode is for saving the play mode for the device. When the auto mode is enabled, the device will automatically apply the play mode set before the power cut off and output ts files stored in the USB device through IP. While the auto mode is off, this network encoder will play the encoded TS through RF when the power is connected.

23 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Parameters → NMS:

From the menu on left side of the webpage, clicking “NMS”, it displays the interface where users set the network configuration for the device. (Figure-6)

Input this address in the browser to connect the device and PC.

Figure-6

Parameters → LCD/Key:

From the menu on left side of the webpage, clicking “LCD/Key”, it displays the interface where users can set the time out for the LCD. (Figure-7)

24 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Figure-7

System → Password:

From the menu on left side of the webpage, clicking “Password”, it will display the screen as Figure-9 where to set the login account and password for the web NMS.

(Figure-8)

Figure-8

System → Save/Restore:

From the menu on left side of the webpage, clicking “Save/Restore”, it will display the screen as Figure-9 where to save or restore your configurations.

25 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Figure-9

System → Backup/Load:

From the menu on left side of the webpage, clicking “Backup/Load”, it will display the screen as Figure-10 where to backup or load your configurations.

Figure-10

System → Update (FPGA)/(CPU)/(Web):

From the menu on left side of the webpage, clicking “Update”, it will display the screen

26 / 34

IRENIS HDE IPTV Network Encoder User’s Manual as Figure-11-13 where to update the corresponding part for the device.

Figure-11

Figure-12

27 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Figure-13

28 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Chapter 7 Network Connection and Setup

Situation 1: LAN network

This is applicable for users in the LAN network, like at home.

STB/ Network Wi-Fi

DVD/ Encoder

Router

Mobile

Terminals

Steps:

Camera/

USB Pen

(used as

Server)

(Laptop/ Tablet/

Phone…)

1. Connect to STB/DVD etc with signal cable or insert USB memory with xx.ts files to provide signal source.

2. Connect to Wi-Fi router (Keep the encoder IP and router IP in the same network segment.)

3. Connect the Wi-Fi between the mobile terminals and the router.

4. Play the video/Audio

1) Play the video/audio on phone/Tablet under HLS protocol.

Apple devices can use “Safari” browser when HLS is applied as the output protocol, no need any 3 rd

party player.

Note:

Android devices need to install “HLS plug-in” to play when HLS is applied

(e.g. Http://192.168.0.136:12003 /prog1.m3u8)

29 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

2) Play the video/audio with media player ( VLC is recommended ) on phone/Tablet.

Click here

Click here

Click “Open

Network Stream”

30 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

3) Play the video/audio with media player ( VLC is recommended ) on computer

Click “Media” to unfold pull down menu

Click “Open

Network Stream”

To play program

Situation 2: WAN network

This is applicable for users far away from home and terminals need access to internet to watch programs.

STB/

DVD/

IRENIS

HDE

Router Wi-Fi

Router

Mobile Terminals

(Laptop/ Tablet/

Internet

Camera/ (used as (if Phone…)

USB Pen Server) needed)

31 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

Steps:

1. Connect to STB/DVD etc with signal cable or insert USB memory with xx.ts files to provide signal source.

2. Connect to router (Keep the encoder IP and router IP in the same network segment.)

3. Connect the router and the manage PC by entering the router IP in browser like below: (Keep the PC IP in the same network segment with encoder IP and router

IP.)

DMZ Host:

(Different router may have different interface and menu instruction, this picture is just for reference.)

4. Go to “DMZ host”, enable DMZ and enter the encoder IP like below: (Different router may have different interface and menu instruction, this picture is just for reference.)

DMZ Status Enable Disable

Input encoder IP here

DMZ host IP address

Save and Apply button

5. Find out the Internet IP address (It must be a Static IP, consult your operator if you

don’t know it.) that allocated to your account by your local operator, and operate terminal device as below:

(For example: Assume the internet IP in your home is 222.208.125.226.)

1) Enable the internet or Wi-Fi on your Laptop/Tablet/Phone.

2) Play the video/Audio, the steps are the same as LAN network, only the IP address is not the same:

IP address:

32 / 34

WAN: Allocated to your account by your local operator

LAN: The same IP address as the

IRENIS HDE IPTV Network Encoder User’s Manual

HLS Protocol:

Http://IP address: IP port/program name. m3u8

(e.g. Http:// 222.208.125.226:12003/prog1.m3u8)

HTTP Protocol:

Http://IP address: IP port/program name

(e.g. Http:// 222.208.125.226:12000/prog1)

RTSP Protocol:

Rtsp: //IP address: IP port/program name

(e.g. Rtsp://

222.208.125.226:12001/prog1)

UDP Protocol:

Udp: //IP address: IP port (e.g. Udp://@ 222.208.125.226:12002)

Here's a guide to what needed in the receiving terminals when watch through this network encoder.

UDP

RTSP

Http

HLS

Mobile Terminals

IOS Android

2

2

2

2

2

1 or 2

2

2 or 3

IP STB

4

4

4

4

PC

1 or 2

1 or 2

1 or 2

1 or 2

1: Browser

2: 3rd Party Media Player like VLC, Buzz Player etc

3: Browser with HLS plug-in

4: Depend on the protocols supported by the STB

33 / 34

IRENIS HDE IPTV Network Encoder User’s Manual

General Distributor Emea:

IRENIS GmbH

Owiesenkehre 1

D-22177 Hamburg

Germany [email protected] http://www.irenis.com

34 / 34

advertisement

Key Features

  • Watch live and recorded TV shows anywhere, anytime
  • Supports HDMI, YPbPr, S-Video, AV, and USB input
  • Encodes in MPEG-4 AVC/H.264 format
  • IP output over UDP, RTP/RTSP, HTTP, and HLS
  • USB port for TS recording and playing
  • Full HD support

Related manuals

Frequently Answers and Questions

What kind of input sources does the IRENIS HDE support?
The IRENIS HDE supports HDMI, YPbPr, S-Video, AV, and USB input.
What encoding format does the IRENIS HDE use?
The IRENIS HDE encodes in MPEG-4 AVC/H.264 format.
How can I connect the IRENIS HDE to my network?
You can connect the IRENIS HDE to your network via Ethernet cable. The manual includes instructions for both LAN and WAN network setups.
How do I record and play back content using the USB port?
The manual provides instructions on how to record and play back content using the USB port. You can record content in TS format and play it back through the device’s IP output.