Below you will find brief information for projector Pro Xtrax Multiverse. The projector can be used to project images from a laptop onto a screen, and is compatible with VGA and audio cables. The projector has a dedicated "Control Center" wall plate with a PC button to turn it on and off, a volume control, and an audio jack. A projection screen can be lowered and raised using a wall switch.
Advertisement
Advertisement
Advertisement
Project images from laptop
VGA cable with audio
Built-in volume control
Control Center wall plate
Projection screen switch
Press the PC button on the "Control Center" wall plate.
Use the VGA with audio cable in the table top compartment and plug it into your laptop.
There is volume control on the "Control Center" wall plate.
Press and hold the PC button for 5 seconds on the "Control Center" plate.
Use the switch on the wall to lower and raise the projection screen.
What should be done if the projector does not recognize the connected computer?
If the projector does not recognize the connected computer, it may be necessary to activate the video output from the laptop by simultaneously pressing the "Function" key and the appropriate "F" key with a monitor icon.
