advertisement
OWNER’S MANUAL
2.1 ch
Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
LAS350B (LAS350B, S35A1-W) www.lg.com
1
2 Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible
NOTICE: For Product Identification and
Compliance/Safety labeling information please refer to Main Label on the bottom of Unit.
Getting Started 3
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery should not be exposed to excessive heat such as sunshine, fire or the like.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1
1
4 Getting Started
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and receiver.
y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
TEL. : +1-800-243-0000
Table of Contents
1 Getting Started
6 – Symbols used in this manual
10 Mounting the main unit on a wall
2 Connecting
12 – Attaching the subwoofer to the unit
13 Optional equipment connection
3 Operating
14 – DRC (Dynamic Range Control)
14 – Turn off the sound temporarily
14 – Displaying input information
14 – Adjusting the brightness of the display window
15 – Using your TV remote control
18 Using BLUETOOTH® technology
19 – Listening to music stored on the
Table of Contents 5
20 – Install “Music Flow Bluetooth” App onto Your BLUETOOTH Device
21 – Activate BLUETOOTH with “Music
22 – Adjust volume level automatically
23 – Adjust the woofer level settings
4 Troubleshooting
5 Appendix
1
2
3
4
5
6
1
6 Getting Started
Unique features
Auto power down
This unit will turn off by itself for energy saving consumption.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
LG Sound Sync
Controls volume level of this unit by the remote control of your LG TV that is compatible with LG
Sound Sync.
Accessories
Please check and identify the supplied accessories.
Designs and specifications of the accessories are subject to change without prior notice.
Remote control (1)
Wall bracket (2)
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages from abuse.
Screws (2)
Batteries (2)
Wall bracket install guide (1)
Cover foot (2)
Optical cable (1)
Remote control
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA) batteries with and matched correctly.
Getting Started 7
• • • • • • • • • • a • • • • • • • • •
1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode.
OPTICAL : Changes input source to OPTICAL.
VOL o/p : Adjusts speaker volume.
(Mute) : Mutes the sound.
: Adjusts sound level of Treble or Bass.
WOOFER LEVEL W/S : Adjusts sound level of
Sub-woofer.
h: Changes input source to Bluetooth.
LG TV : Changes input source to LG TV
PORT.IN : Changes input source to Portable.
• • • • • • • • • • b • • • • • • • • •
SOUND EFFECT : Selects a sound effect mode.
AV SYNC : Synchronizes the audio and video.
A/D : Selects Sound Effects or adjusts AV sync.
(Night mode) : Turns on or off Night mode.
• • • • • • • • • • c • • • • • • • • •
DRC : Turns on or off DRC function.
INFO :
- Displays the information of an input source and
Bluetooth address.
- Controls TV remote (Refer to the page 15)
SLEEP : Sets the system to turn off automatically at a specified time.
AUTO VOLUME : Turns on and off the AUTO
VOLUME mode.
AUTO POWER : Turns on or off AUTO POWER function. (Refer to the page 16.)
? : This button is not available.
1
1
8 Getting Started
Front panel
A Remote sensor
B Display window
Standby LED
It lights up in red on standby mode.
Rear panel
C 1/! (Standby/On)
D F (Function)
Selects the function and input source.
E p/o (Volume)
Adjusts volume level.
A Power cord
B SUB WOOFER(4Ω) Connector
C OPT. IN : Optical input
D PORT. IN : Portable input
Getting Started 9
Installing the sound bar
You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to
the device you want. (Refer to pages 12 - 13.)
Installing the cover foot
You can extend the height of the unit by using cover foot (height : 17 mm)
1. Turn the unit upside down.
2. Peel off a sticker attached to the cover foot.
Then place it on the existing foot of the unit.
3. Press the cover foot with adequate force to get it firmly fixed.
How to Affix the Ferrite Core
(Optional)
You may need to attach Ferrite core in order to reduce or eliminate any electrical interference.
1. Open
> Caution y For best performance of wireless connection such as Bluetooth, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit.
y Be careful not to make scratches on the surface of the Unit /Sub-Woofer when installing or moving them.
y Use caution when handling the Sub
Woofer. The speaker on the rear is exposed. Avoid making contact with the exposed speaker.
2. Wind (Twice)
1
3. Close
1
10 Getting Started
Mounting the main unit on a wall
You can mount the main unit on a wall.
1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position.
TV
> Caution
Because it is difficult to make a connection after installing this unit, you should connect the cables before installation.
Preparation materials
Unit
Wall bracket install guide
Wall bracket
Screws
(Not supplied)
Screws (A)
Wall plug
2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
3. Remove the Wall bracket install guide.
Getting Started 11
4. Fix the brackets with screws (A) as shown in the illustration below.
6. Fix the unit with the screws firmly.
1
, Note
Screws (A) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
5. Put the unit on the brackets to match screw holes on the bottom of the unit.
, Note
To detach the unit, perform it in reverse order.
> Caution y Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.
y Do not hang onto the installed unit and avoid any impact to the unit.
y Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.
y When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall.
2
12 Connecting
Connecting the subwoofer
Connecting to your TV
Attaching the subwoofer to the unit
To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad.
Connect the black wire to the terminals marked
- (minus) and the other end to the terminals(red tube) marked + (plus).
Using an OPTICAL cable
1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical cable
2. Set the INPUT source to OPTICAL. Press
OPTICAL on the remote control or F on the unit until the function is selected.
, Note y Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
y You can enjoy the TV audio through the speakers of this unit. In the case of some
TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.) y Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound output] [ [External speaker (Optical)] y Details of TV setting menu vary depending on the manufacturers or models of your TV.
Optional equipment connection
OPTICAL IN connection
Connect an optical output jack of external devices to the OPTICAL IN jack.
Connecting 13
PORTABLE IN connection
MP3 player, etc...
2
To the optical output jack of external device
1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your TV (or digital device etc.)
2. Select the input source to OPTICAL by pressing
OPTICAL on the remote control or F on the unit until the function is selected.
3. Listen to sound.
, Note
Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
Listening to music from your portable player
The unit can be used to play the music from many types of portable players or external devices.
1. Connect the portable player to the
PORTABLE IN connector of the unit by using 3.5 mm stereo cable.
2. Turn the power on by pressing 1 (Power).
3. Select the PORTABLE function by pressing
PORT.IN on the remote control or F on the unit until the function is selected.
4. Turn on the portable player or external device and start playing it.
3
14 Operating
Operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned down and prevent sudden increase of sound
(Dolby Digital only). Set to [DRC ON] by using DRC.
Turn off the sound temporarily
Press (Mute) to mute your unit.
You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window.
To cancel it, press (Mute) again on the remote control or change the volume level.
AV Sync
When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time.
1. Press AV SYNC.
2. Use A/D to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.
Displaying input information
You can display various information by pressing
INFO.
OPTICAL: Audio format, Audio channel
Bluetooth: Address of connected Bluetooth device
Sleep timer setting
This unit will be turned off automatically by your timer set.
Press SLEEP repeatedly to select the desired time period options (in minutes):
DISPLAY OFF (display window will turns off ) ->
DIMMER (display window will be darkened by half )
-> Sleep timer value (180 ~ 10) -> Display on
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
, Note
You can check the remaining time before the unit turns off . Press SLEEP the remaining time appears in the display window.
Adjusting the brightness of the display window
It helps you to watch TV without interruptions due to the light from the display window of this unit.
DISPLAY OFF
Select DISPLAY OFF to turn off the display window of this unit. If you input the buttons of the unit or the remote control, display shows the status of the unit and then turns off again after several seconds.
DIMMER
Select DIMMER to dim the display window.
Operating 15
Using your TV remote control
You can control some functions of this unit by your TV remote control even by other company’s product.
Controllable functions are volume up/down and mute.
Press and hold INFO on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control.
To check the status of this function, press and hold
INFO.
To turn off this function, press and hold INFO and press it once again while “ON - TV REMOTE” is scrolled.
, Note y Supported TV brands
LG
Sharp
Panasonic Philips Samsung
Sony Toshiba Vizio y Make sure that the sound output of your TV is set to [External speaker].
y Depending on the remote control, this function may not work well.
y This function may not work well when you use LG Sound Sync.
Auto power down
This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes.
So does this unit after six hours since Main unit has been connected to other device using analog input. (Ex : Portable, etc..)
3
3
16 Operating
AUTO POWER On/Off
This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.
When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and select the suitable function. You can hear the sound from your device.
If you try to connect your Bluetooth device, this unit turns on and ready to pair. Connect your
Bluetooth device and play your music.
This function turns on or off each time you press
AUTO POWER.
, Note y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync
(Optical/Wireless).
y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device.
y If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal.
y Depending on the connected device, this function may not operate.
y If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turn off the unit.
y When you turn on this unit for the first time,
Auto Power function is turned on status.
Auto function change
This unit recognizes input signals such as optical,
Bluetooth and LG TV and then changes suitable function automatically.
When optical signal comes in
When you turn on the external device connected to this unit by an optical cable, this unit change the function to optical. You can hear the sound from your device.
When you try to connect
BLUETOOTH device
When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by
LG Sound Sync (Wireless connection), this unit changes the function to LG TV. You can hear the sound from your TV.
, Note
To change to optical function, it needs 5 seconds of no signal.
Operating 17
LG Sound Sync With wired connection
1. Connect your LG TV to the unit by using an optical cable.
You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details of LG Sound Sync.
Make one of the following connections, depending on the capabilities of your equipment.
, Note y You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV.
y When the connection fails, make sure of the condition of the TV and power.
y Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync.
- Turn off the unit.
- Changing the function to the others.
- Disconnecting the optical cable.
- Disconnecting the wireless connection caused by interference or a distance.
y The amount of time to turn off this unit is different depending on your TV when you set AUTO POWER function to ON.
y Details of TV setting menu vary depending on the models of your TV.
Optical cable
2. Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1 (Power) on the remote control.
4. Select OPTICAL function by using OPTICAL on the remote control or F on the unit until the function is selected.
You can see "LG OPT" on the display window if connecting normally between this unit and your TV.
3
3
18 Operating
With wireless connection
1. Turn on the unit by pressing 1 (Power) on the remote control.
2. Select LG TV function by using LG TV on the remote control or F on the unit until the function is selected.
3. Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound output] [ [LG Sound Sync (Wireless)]
"PAIRED" appears on the display window for about 3 seconds and then you can see "LG TV" on the display window if connecting normally between this unit and your TV.
, Note y If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will be disconnected. To use this function again, you should reconnect the TV and the unit.
y Details of TV setting menu vary depending on the models of your TV.
Using BLUETOOTH® technology
About BLUETOOTH
Bluetooth is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
BLUETOOTH Profiles
In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Operating 19
Listening to music stored on the BLUETOOTH devices
Pairing your unit and BLUETOOTH device
Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Select the Bluetooth function by using h on the remote control or F on the unit until the function is selected.
Appears “BT” and then “BT READY” in display window.
2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG LAS350B (XX)”.
, Note y XX means the last two digits of
Bluetooth address. For example, if your unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG LAS350B (08)” on your Bluetooth device.
y Depending on the Bluetooth device type, some device have a different pairing way.
Enter the PIN code (0000) as needed.
y You can connect this unit with up to 3
Bluetooth device simultaneously same method as above description.
y The multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be supported depending on the connected device specifications.) y Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn't supported multi pairing.
3. When this unit is successfully connected with your Bluetooth device, “PAIRED” will be appear on the display window and change to
Bluetooth device name soon.
, Note y "PAIRED" will be momentarily appear on the display when you connect other devices for multi pairing.
y If it is unavailable to display device name on the unit, "_" will be displayed.
4. Listen to music.
To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
, Note y When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance.
However it may not work well in the case below :
- There is a obstacle between the unit and the Bluetooth device.
- There is a device using same frequency with Bluetooth technology such as a medical equipment, a microwave or a wireless LAN device.
y You should connect your Bluetooth device to this unit again when you restart it.
y Even if this unit connected up to 3
Bluetooth devices, you can play and control music by using only one of the connected devices.
y When this unit connected with multiple
Bluetooth devices, only one device which you are playing keeps Bluetooth connection when you change the function to the others.
3
3
20 Operating
, Note y The sound may be interrupted when the connection interfered by the other electronic wave.
y You may not control the Bluetooth device with this unit.
y Depending on the type of the device, you may not be able to use the Bluetooth function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc..
y The more distance between the unit and the Bluetooth device, the lower the sound quality becomes.
y Bluetooth connection will be disconnected when the unit is turned off or the
Bluetooth device gets far from the unit.
y When Bluetooth connection is disconnected, connect the Bluetooth device to the unit again.
y When not connected the Bluetooth, “BT
READY” appears on the display window.
y When you connect Bluetooth device
(iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other.
Using BLUETOOTH
App
, Note
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.
About “Music Flow Bluetooth” App
“Music Flow Bluetooth” app brings a suite of new features to this unit.
To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth” app.
Install “Music Flow Bluetooth”
App onto Your BLUETOOTH
Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App through QR code
1. Install “Music Flow Bluetooth” app through QR code. Use the scanning software to scan the QR code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
, Note y Make sure that your Bluetooth device is connected to the Internet.
y Make sure that your Bluetooth device has a scanning software application. If you don’t have one, download one from “Google
Android Market (Google Play Store)”.
y Depending on area, QR code may not work.
Install “Music Flow Bluetooth” App through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
, Note y Make sure that your Bluetooth device is connected to the Internet.
y Make sure that your Bluetooth device is equipped with “Google Android Market
(Google Play Store)”.
Activate BLUETOOTH with
“Music Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app, and go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate, tap [Setting] and turn on the User guide.
Operating 21
, Note y “Music Flow Bluetooth ” app will be available in the software version as follow;
- Android O/S : Ver 4.0.3 (or later) y If you use “Music Flow Bluetooth ” app for operation, there would be some differences between “Music Flow Bluetooth ” app and the supplied remote control. Use the supplied remote control as necessary.
y Depending on the Bluetooth device,
“Music Flow Bluetooth ” app may not work.
y After connection of “Music Flow Bluetooth” app, music may be output from your device.
In this case, try connecting procedure again.
y If you operate the other applications or change the settings on your Bluetooth device while using “Music Flow Bluetooth
” app, “Music Flow Bluetooth ” app may operate abnormally.
y When “Music Flow Bluetooth ” app operates abnormally, check your Bluetooth device and the connection of “Music Flow
Bluetooth ” app and then try to connect again.
y Depending on the smart phone's operating system, you have some differences for
“Music Flow Bluetooth ” operation.
y Even though Bluetooth connection will be disconnected, you can use “Music Flow
Bluetooth ” app when you change the function.
3
3
22 Operating
Sound adjustment
Setting sound effect
This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT.
Press SOUND EFFECT repeatedly or press SOUND
EFFECT and then, press A/D.
The displayed items for the equalizer may be different depending on sound sources and effects.
On Display
STANDARD
MUSIC
CINEMA
Description
You can enjoy optimized sound.
You can enjoy comfortable and natural sound.
You can enjoy more immersive and cinematic surround sound.
Provides balanced sound.
FLAT
BOOST
Boosts the mid-range for sound reinforcement.
TRE / BASS
(TREBLE / BASS)
Reinforces the treble and bass.
, Note y In some of sound effect mode, some speakers, there’s no sound or low sound.
It depends on the mode of sound and the source of audio, it is not defective.
y You may need to reset the sound effect mode, after switching the input, sometimes even after the sound file changed.
Adjust volume level automatically
This unit supports Auto volume function that automatically adjusts the volume level.
When the output sound is too loud or too low, press AUTO VOLUME on the remote control. So you can enjoy the sound with appropriate levels.
To cancel this function, press the button again.
Adjust the Treble/Bass
You can adjust the sound level of Treble, Bass as your preference.
TREBLE/BASS : - 5 dB to 5 dB
1. Press button repeatedly to select TREBLE or
BASS
2. Press VOL o/p to adjust the sound level.
Adjust the woofer level settings
You can adjust the sound level of woofer from - 20 dB to + 6 dB.
Press WOOFER LEVEL W or WOOFER LEVEL S to adjust the sound level of the woofer.
Night mode
This function is useful when you want to watch movies at low volume late at night.
Press button on the remote control. So you can activate Night mode. To cancel it, press button again.
Operating 23
3
4 Troubleshooting
4
24 Troubleshooting
Troubleshooting
PROBLEM
The unit does not work properly.
No Power
No sound
CAUSE & CORRECTION y Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
y Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
y The power cord is unplugged.
Plug in the power cord.
y Check the condition by operating other electronic devices.
y Incorrect input source is selected.
Check the input source and select the correct input source.
y The mute function is activated.
Press (Mute) or adjust the volume level to cancel the mute function.
y When you are using connection with a external device (set top box, Bluetooth device etc.), adjust volume level of the device.
No woofer sound y Connect the unit and the subwoofer. (Refer to the page 12)
No display y The DISPLAY OFF function is activated.
Press SLEEP repeatedly to cancel the function. (Refer to the page 14)
The remote control does not work properly.
y The remote control is too far from the unit.
Operate the remote control within about 7 m.
y There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y The batteries in the remote control is exhausted.
Replace the batteries with new one.
The AUTO POWER function does not work.
y Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
y Depending on the connected device, this function may not operate.
LG Sound Sync does not work.
y Check whether your LG TV supports LG Sound Sync.
y Check connection of LG Sound Sync (Optical or wireless).
y Check sound setting of your TV and this unit.
Troubleshooting 25
PROBLEM CAUSE & CORRECTION
When you feel the output sound of the unit is low.
Check the details below and adjust the unit according to them.
y Switch [ON] state of DRC function to [OFF] by using remote controller.
y With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y Change Audio DRC setting on Player setup menu to [OFF] state.
4
5 Appendix
26 Appendix
Trademarks and licenses
All other trademarks are trademarks of their respective owners.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Bluetooth® wireless technology is a system which allows radio contact between electronic.
Connecting individual devices under Bluetooth® wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
5
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
Appendix 27
Specifications
General (LAS350B)
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Input/Output
OPT. IN
PORT. IN
Available Digital Input Audio
Sampling Frequency
Amplifier
Total
Front
Subwoofer
THD
Subwoofer (S35A1-W)
Type
Impedance
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
Net Weight (Approx.)
120 V ~ 60 Hz
21 W
880 mm x 59 mm x 90 mm (34.6 inch x 2.3 inch x 3.5 inch)
1.9 kg (4.2 lb)
41 °F to 95 °F (5 °C to 35 °C)
5 % to 90 %
3 V (p-p), Optical jack x 1
0.5 Vrms (3.5 mm stereo jack) x 1
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
120 W
25 W x 2 (6 Ω at 1 kHz)
70 W (4 Ω at 100 Hz)
10 %
1 Way 1 Speaker
4 Ω
70 W
140 W
156 mm x 300 mm x 288 mm (6.1 inch x 11.8 inch x 11.3 inch)
2.9 kg (6.4 lb)
5
5
28 Appendix
Bluetooth
Codec SBC y Designs and specifications are subject to change without prior notice.
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
y Do not use volatile liquids such as insecticide spray near the unit. y Wiping with strong pressure may damage the surface.
y Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Appendix 29
5
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 2.1 channels 120 W Dolby Digital, DTS
- Soundbar speaker RMS power: 50 W
- Passive subwoofer Subwoofer RMS power: 70 W
- Black
- Wired & Wireless Bluetooth 4.0
Related manuals
advertisement