Operations. LG LAS350B

3

14 Operating

Operations

DRC (Dynamic Range Control)

Make the sound clear when the volume is turned down and prevent sudden increase of sound

(Dolby Digital only). Set to [DRC ON] by using DRC.

Turn off the sound temporarily

Press (Mute) to mute your unit.

You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window.

To cancel it, press (Mute) again on the remote control or change the volume level.

AV Sync

When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time.

1. Press AV SYNC.

2. Use A/D to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.

Displaying input information

You can display various information by pressing

INFO.

OPTICAL: Audio format, Audio channel

Bluetooth: Address of connected Bluetooth device

Sleep timer setting

This unit will be turned off automatically by your timer set.

Press SLEEP repeatedly to select the desired time period options (in minutes):

DISPLAY OFF (display window will turns off ) ->

DIMMER (display window will be darkened by half )

-> Sleep timer value (180 ~ 10) -> Display on

To check the remaining time, press SLEEP.

To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press

SLEEP once again while “SLEEP 10” is displayed.

, Note

You can check the remaining time before the unit turns off . Press SLEEP the remaining time appears in the display window.

Adjusting the brightness of the display window

It helps you to watch TV without interruptions due to the light from the display window of this unit.

DISPLAY OFF

Select DISPLAY OFF to turn off the display window of this unit. If you input the buttons of the unit or the remote control, display shows the status of the unit and then turns off again after several seconds.

DIMMER

Select DIMMER to dim the display window.

Operating 15

Using your TV remote control

You can control some functions of this unit by your TV remote control even by other company’s product.

Controllable functions are volume up/down and mute.

Press and hold INFO on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control.

To check the status of this function, press and hold

INFO.

To turn off this function, press and hold INFO and press it once again while “ON - TV REMOTE” is scrolled.

, Note y Supported TV brands

LG

Sharp

Panasonic Philips Samsung

Sony Toshiba Vizio y Make sure that the sound output of your TV is set to [External speaker].

y Depending on the remote control, this function may not work well.

y This function may not work well when you use LG Sound Sync.

Auto power down

This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes.

So does this unit after six hours since Main unit has been connected to other device using analog input. (Ex : Portable, etc..)

3

3

16 Operating

AUTO POWER On/Off

This unit automatically turns on by an input source :

Optical, LG TV or Bluetooth.

When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and select the suitable function. You can hear the sound from your device.

If you try to connect your Bluetooth device, this unit turns on and ready to pair. Connect your

Bluetooth device and play your music.

This function turns on or off each time you press

AUTO POWER.

, Note y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync

(Optical/Wireless).

y After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device.

y If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal.

y Depending on the connected device, this function may not operate.

y If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turn off the unit.

y When you turn on this unit for the first time,

Auto Power function is turned on status.

Auto function change

This unit recognizes input signals such as optical,

Bluetooth and LG TV and then changes suitable function automatically.

When optical signal comes in

When you turn on the external device connected to this unit by an optical cable, this unit change the function to optical. You can hear the sound from your device.

When you try to connect

BLUETOOTH device

When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device.

When LG TV signal comes in

When you turn on your LG TV connected by

LG Sound Sync (Wireless connection), this unit changes the function to LG TV. You can hear the sound from your TV.

, Note

To change to optical function, it needs 5 seconds of no signal.

Operating 17

LG Sound Sync With wired connection

1. Connect your LG TV to the unit by using an optical cable.

You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG

Sound Sync. Make sure of the LG Sound Sync logo on your TV.

Controllable function by LG TV's remote control :

Volume up/down, mute

Refer to the TV's instruction manual for the details of LG Sound Sync.

Make one of the following connections, depending on the capabilities of your equipment.

, Note y You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV.

y When the connection fails, make sure of the condition of the TV and power.

y Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync.

- Turn off the unit.

- Changing the function to the others.

- Disconnecting the optical cable.

- Disconnecting the wireless connection caused by interference or a distance.

y The amount of time to turn off this unit is different depending on your TV when you set AUTO POWER function to ON.

y Details of TV setting menu vary depending on the models of your TV.

Optical cable

2. Set up the sound output of TV to listen to the sound through this unit :

TV setting menu [ [Sound] [ [TV Sound output] [ [LG Sound Sync (Optical)]

3. Turn on the unit by pressing 1 (Power) on the remote control.

4. Select OPTICAL function by using OPTICAL on the remote control or F on the unit until the function is selected.

You can see "LG OPT" on the display window if connecting normally between this unit and your TV.

3