SMART Sync 2010 classroom management software System Administrator’s Guide
تبلیغات
تبلیغات
P L E A S E T H I N K B E F O R E Y O U P R I N T
SMART Sync™ 2010 (Beta)
System Administrator’s Guide
Windows® Operating Systems
Product Registration
If you register your SMART product, we’ll notify you of new features and software upgrades.
Register online at www.smarttech.com/registration .
Keep the following information available in case you need to contact SMART
Technical Support.
Product Key: ___________________________________________________
Date of Purchase: ___________________________________________________
Trademark Notice
SMART Sync, smarttech and the SMART logo are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. Microsoft, Windows, Windows Vista, DirextX, Internet Explorer and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.All other thirdparty product and company names are mentioned for identification purposes only and may be trademarks of their respective owners.
Copyright Notice
©2008–2010 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
Patents pending.
02/2010
Check Lists
N O T E S l
A basic installation includes the minimum components required to get
SMART Sync™ classroom management software up and running. The pages of this guide applicable to a basic installation are marked with a green stripe in the top-left corner.
l
A complete installation includes all components.
Basic Installation
Check Task
Ensure your environment meets SMART Sync’s minimum requirements.
If you’re installing SMART Sync using the command line interface, or third-party imaging or remote management software, locate the installation packages and supporting files.
Install SMART Sync Teacher on teachers’ computers.
Install SMART Sync Student on students’ computers.
Reference
OR
OR
OR
OR
i i | C H E C K L I S T S
Complete Installation
Check Task
Ensure your environment meets SMART Sync’s minimum requirements.
If you’re installing SMART Sync using the command line interface, or third-party imaging or remote management software, locate the installation packages and supporting files.
Install SMART Sync Teacher on teachers’ computers.
Reference
Install SMART Sync Student on students’ computers.
Install SMART Sync Class List Server and Administrator
Tool.
OR
OR
OR
OR
OR
OR
Export information from third-party applications to CSV files. page 14
Set up a SMART School file.
Configure SMART Sync Class List Server (if necessary).
Configure SMART Sync Student (if necessary).
Contents
Using the Installation Wizards
Using the Command Line Interface
Using Third-Party Imaging or Remote Management Software
Configuring SMART Sync Class List Server
Configuring SMART Sync Student
Modifying or Removing SMART Sync
Using the Command Line Interface
Using Third-Party Imaging or Remote Management Software
Windows Installer Properties, Parameters and Examples
Installing SMART Install Manager
Customizing the SMART Sync Teacher Installation Package
Customizing the SMART Sync Student Installation Package
B A S I C I N S T A L L A T I O N
Chapter 1
Getting Started
Computer and Network Requirements
Teachers’ and Administrators’ Computers
This guide explains how to install and configure SMART Sync classroom management software.
This guide is intended for IT administrators and others experienced with installing, configuring and administering Windows software in a networked environment. To use this guide, you must: l
Know IT terminology such as “registry” and “domain controller” l
Know how to complete basic administrative tasks in Windows® operating systems such as opening the Control Panel or modifying the registry l
Have administrative privileges and access to your school’s servers l
Have the SMART Sync CD or access to the SMART Support website
B A S I C I N S T A L L A T I O N 2 | C H A P T E R 1 – G E T T I N G S T A R T E D
About SMART Sync
SMART Sync consists of four components.
Component
Teacher
Student
Class List
Server
Administrator
Tool
Purpose
Connects teachers’ and students’ computers
Allows teachers and administrators to create and edit SMART School files, which are central repositories of student, teacher, class, computer lab and computer information, and application and Internet blocking rules
Typical Location
Allows teacher to connect with students and other teachers (as teacher aides)
Teachers’ computers
Allows students to connect with teachers Students’ computers
Server accessible to all teachers’ and students’ computers
Teachers’ or administrators’ computers
N O T E
SMART Sync Class List Server and Administrator Tool are optional. You don’t need to install them to use SMART Sync Teacher and Student. However, there are benefits to installing them.
Preparing Your Environment
Before installing SMART Sync, read this chapter to ensure your school’s computers and network meet the software’s minimum requirements.
Computer and Network Requirements
Teachers’ and Administrators’ Computers l
Pentium® III 600 MHz processor l
256 MB of RAM l
100 MB of free hard disk space l
Windows XP, Windows Vista® or Windows 7 operating system l
800 × 600 or higher resolution display with 16-bit color quality
B A S I C I N S T A L L A T I O N 3 | C H A P T E R 1 – G E T T I N G S T A R T E D l
Internet Explorer® Internet browser version 5.0 or later l
DirectX® technology version 7.0a or later
Students’ Computers l
Pentium III 500 MHz processor l
128 MB of RAM l
55 MB of free hard disk space l
Windows XP, Windows Vista or Windows 7 operating system l
600 × 480 or higher resolution display with 16-bit color quality l
Internet Explorer Internet browser version 5.0 or later l
DirectX technology version 7.0a or later
Network l
10 Mbps TCP/IP network interface adapter
Display Settings
SMART Sync works best when the teachers’ and students’ computers are set to the same screen resolution and color depth. However, the software makes adjustments for different color settings and resolutions. For example, if a broadcasting computer (either teacher or student) runs at a higher resolution than a viewing computer, scroll bars appear on the viewing computer so you can view the entire higher-resolution screen.
Similarly, if a broadcasting computer has a higher color setting than a viewing computer, the broadcasting computer’s colors are reduced so the user can see it at the viewing computer. For example, if a student’s computer has a higher color setting than the teacher’s computer, the teacher sees a Color Reduced message below the thumbnail.
When the teacher views a live, full-screen image, the colors appear slightly degraded.
For information on how to change the display settings of your school’s monitors, see the instructions that came with the operating system.
SMART Sync works best when the screen resolution is 1024 × 768. Refer to the following table for the optimal screen resolution and color depth for your school’s monitors.
Color Depth/Screen Resolution High Color (16-bit)
1024 × 768 or lower
1152 × 864
1280 × 1024
1600 × 1200
Optimal
Acceptable
Acceptable
Acceptable
True Color (32-bit)
Optimal
Acceptable
Acceptable
Not recommended
B A S I C I N S T A L L A T I O N 4 | C H A P T E R 1 – G E T T I N G S T A R T E D
Network Size and Speed
The preferred TCP/IP network configuration for SMART Sync is a switch or a switching hub that restricts network traffic to a particular segment of your local area network. In this configuration, other network traffic doesn’t affect your system and SMART Sync doesn’t slow down other segments of the network. Network activity is faster when the number of connected students is smaller.
Network Type
10 Mbps
100 Mbps
Wireless (single 802.11 a/g access point)
Maximum Number of Students
40
80
30
T I P
Graphics-rich backgrounds on your students’ screens may slow SMART Sync’s performance. Performance is best if your students’ screens have simple, single-color backgrounds.
Internet Connection Firewalls
If you install SMART Sync on a computer that has an active Internet connection firewall, the firewall can cause network problems. If possible, set the firewall to allow network traffic from SMART Sync. If this doesn’t resolve the problem, ensure the following network communication ports are open:
Port
5463
5485
5496
5491
5493
46200
Type
TCP
TCP
UDP
UDP
UDP
TCP
Purpose
Main teacher to student communications port
Main teacher to teacher communications port
Teacher discovery port
Broadcast port
Broadcast recovery port
Class List Server
B A S I C I N S T A L L A T I O N
Chapter 2
Installing SMART Sync
Locating Installation Packages
Using the Installation Wizards
Installing SMART Sync Teacher, Class List Server and Administrator Tool
Using the Command Line Interface
Installing the SMART Sync Components
Customizing Your Installations
Using Third-Party Imaging or Remote Management Software
You can install SMART Sync using one of the following tools: l
Installation wizards l
Command line interface l
Third-party imaging or remote management software
This chapter describes these tools and shows you how to use them to complete a basic installation of SMART Sync.
Locating Installation Files
If you’re installing SMART Sync using the command line interface, or third-party imaging or remote management software, first locate the installation packages and supporting files as documented in this section.
B A S I C I N S T A L L A T I O N 6 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
Locating Installation Packages
There are two installation packages (also known as MSI files) for SMART Sync:
File Name Components Installation
Package
SMART Sync
Teacher
SMART Sync
Student
SMART Sync
2010.msi
SMART Sync
Student 2010.msi
SMART Sync Teacher, Class List Server and Administrator Tool
SMART Sync Student
Both installation packages are located on the SMART Sync CD. The SMART Sync
Teacher installation package is located in the TeacherSetup folder, and the SMART
Sync Student installation package is located in the StudentSetup folder.
Alternatively, you can download both packages from www.smarttech.com/downloads
(click SMART Sync software (Windows) under Admin tools).
Save the packages in a location on your school’s network that is accessible to all computers on which you plan to install SMART Sync.
B A S I C I N S T A L L A T I O N 7 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
Locating Language Files
If you plan to install SMART Sync in a language other than English (U.S.), ensure the corresponding MST file for that language is in the same folder as the MSI file.
File
1033.mst
2057.mst
1025.mst
2052.mst
1029.mst
1030.mst
1043.mst
1035.mst
1036.mst
1031.mst
1032.mst
1038.mst
1040.mst
1044.mst
2070.mst
1046.mst
1049.mst
1034.mst
2058.mst
1053.mst
1055.mst
Language
English (U.S.)
English (UK)
Arabic
Chinese (Simplified)
Czech
Danish
Dutch
Finnish
French
German
Greek
Hungarian
Italian
Norwegian
Portuguese (Portugal)
Portuguese (Brazil)
Russian
Spanish (Spain)
Spanish (Mexico)
Swedish
Turkish
The MST files are available from the same locations as the MSI files.
Using the Installation Wizards
Use the installation wizards if you’re installing SMART Sync on a small number of computers or if teachers and students are responsible for installing software on their own computers.
You can start the installation wizards by inserting the SMART Sync CD into the computer or downloading executable (.exe) files from the SMART website.
B A S I C I N S T A L L A T I O N 8 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
To install the software from the CD
Installing SMART Sync Teacher, Class List Server and
Administrator Tool
1. Insert the SMART Sync CD in the computer.
The SMART Sync Classroom Management Software dialog box appears.
N O T E
If the dialog box doesn’t appear, browse to and open
[CD Drive]\CDBrowser.exe.
2. Click Install Teacher Edition.
The SMART Sync Teacher installation wizard appears.
3. Follow the on-screen instructions to install SMART Sync Teacher, Class List
Server and Administrator Tool.
To install the software from the website
1. Go to www.smarttech.com/downloads .
2. Click Windows operating system under SMART Sync classroom management
software.
3. Follow the on-screen instructions to download the SMART Sync Teacher installation wizard executable file.
4. Double-click the executable file.
5. Follow the on-screen instructions to install SMART Sync Teacher, Class List
Server and Administrator Tool.
To install the software from the CD
Installing SMART Sync Student
1. Insert the SMART Sync CD in the computer.
The SMART Sync Classroom Management Software dialog box appears.
N O T E
If the dialog box doesn’t appear, browse to and open
[CD Drive]\CDBrowser.exe.
B A S I C I N S T A L L A T I O N 9 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
To install the software from the website
2. Click Install Student Edition.
The SMART Sync Student installation wizard appears.
3. Follow the on-screen instructions to install SMART Sync Student.
1. Go to www.smarttech.com/downloads .
2. Click Windows operating system under SMART Sync classroom management
software.
3. Follow the on-screen instructions to download the SMART Sync Student installation wizard executable file.
4. Double-click the executable file.
5. Follow the on-screen instructions to install SMART Sync Student.
To install SMART Sync
Teacher
Using the Command Line Interface
Use the command line interface if you prefer to install SMART Sync using a command line interface rather than a GUI installation wizard.
Installing the SMART Sync Components
For basic installations, install SMART Sync Teacher and Student. For complete installations, install all components.
1. Open a Command Prompt window.
2. Type the following command: msiexec /i "[Path]\SMART Sync 2010.msi" /q
Where [Path] is the path to the SMART Sync 2010.msi file.
3. Press ENTER.
Windows Installer installs SMART Sync Teacher.
B A S I C I N S T A L L A T I O N 1 0 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
To install SMART Sync
Teacher, Class List Server and Administrator Tool
To install SMART Sync
Student
1. Open a Command Prompt window.
2. Type the following command: msiexec /i "[Path]\SMART Sync 2010.msi"
INSTALLCLASSLISTSERVER=1 INSTALLADMINTOOL=1 /q
Where [Path] is the path to the SMART Sync 2010.msi file.
3. Press ENTER.
Windows Installer installs SMART Sync Teacher, Class List Server and
Administrator Tool.
1. Open a Command Prompt window.
2. Type the following command: msiexec /i "[Path]\SMART Sync Student 2010.msi" /q
Where [Path] is the path to the SMART Sync Student 2010.msi file.
3. Press ENTER.
Windows Installer installs SMART Sync Student.
Customizing Your Installations
When installing the SMART Sync components using the command line interface, you can customize your installations by specifying properties. For example, you can allow students to close SMART Sync Student by setting the SYNC_DISPLAYEXIT property to 1. (By default, students can’t close SMART Sync Student.)
See Windows Installer Properties, Parameters and Examples on page 43 for a complete
list of these properties as well as available parameters and example commands.
Using Third-Party Imaging or Remote
Management Software
You can install SMART Sync on multiple computers using third-party imaging or remote management software. This option is best for large installations involving many computers.
B A S I C I N S T A L L A T I O N 1 1 | C H A P T E R 2 – I N S T A L L I N G S M A R T S Y N C
Use MST files to customize installation packages. You can create these files using
SMART Install Manager (see page 53) or third-party software.
The following procedure shows how to deploy SMART Sync using Windows operating systems’ Group Policy-based deployment software. For information on deploying
SMART Sync using your organization’s third-party imaging or remote management software, see the software’s documentation.
N O T E
This procedure may vary depending on your version of Windows operating system and your system preferences.
To deploy an installation package
1. Copy the MSI file and the MST file to \\[Domain Controller]\NETLOGON, where
[Domain Controller] is your school’s domain controller.
2. Open the Control Panel.
3. Double-click Administrative Tools.
4. Double-click Active Directory Users and Computers.
The Active Directory Users and Computers window appears.
5. Right-click your school’s domain, and then select Properties.
The Properties dialog box appears.
6. Click the Group Policy tab, and then click Edit.
The Group Policy Object Editor dialog box appears.
7. Browse to and open Computer Configuration\Software Settings.
8. Right-click Software Installation, and then select New > Package.
9. Browse to and select the MSI file from step 1.
10. In the Deploy Software section, click Advanced, and then click OK.
11. Click the Modifications tab, and then click Add.
12. Browse to and select the MST file from step 1.
13. Click OK to apply the MST file to the MSI file.
14. Close all open windows and dialog boxes.
The next time each computer on the domain starts, it automatically installs the software in Silent mode with the customizations defined in the MST file.
Chapter 3
Configuring SMART Sync
Using Information from Third-Party Applications
Creating or Opening a SMART School File
Locating SMART Sync Class List Server
Entering Student, Teacher and Class Information
Entering Computer Lab Information
Creating Administered Application Blocking Rules
Creating Administered Internet Blocking Rules
Reviewing the SMART School File
Configuring SMART Sync Class List Server
Stopping and Restarting SMART Sync Class List Server
Stopping SMART Sync Class List Server
Restarting SMART Sync Class List Server
Changing the SMART Sync Class List Server Port Number
Configuring SMART Sync Student
Running the SMART Sync Student Configuration Tool
Automatically Configuring SMART Sync Student Installations
After installing SMART Sync, you can set up SMART School files and configure
SMART Sync Class List Server and Student as described in this chapter.
Setting Up SMART School Files
SMART Sync Administrator Tool allows you to create and edit SMART School (.school) files.
A SMART School file contains information about students, teachers, classes and computer labs in your school as well as rules that teachers can apply to block student
1 4 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To create a student, teacher and class CSV file access to applications and websites. If you specify the location of a SMART School file in SMART Sync Teacher, teachers can use this information to connect to their students.
In most situations, you only need to create one SMART School file per school so that all teachers and students in the school can connect to each other. For security reasons, when you create the file, save it in a location accessible to teachers and network administrators, but not to students. After creating the file, you can update it.
Using Information from Third-Party Applications
If you manage school information using a third-party application, you may be able to export the school information to two CSV files (one for students, teachers and classes
and the other for computer labs) to use it in your SMART School file (see Importing
School Information on page 19).
The following is an example student, teacher and class CSV file:
ID,Last Name,First Name,Title,Class ID,Class Title,Type
S001,Adams,John,,Eng,English,0
S002,Brook,Sally,,Eng,English,0
S003,Williams,Ronald,,Eng,English,0
T001,Johnson,Adam,Mr.,Eng,English,1
The following is a an example computer lab file:
Hostname,Workstation Name,Lab ID,Lab Title
127.0.0.1,Main Lab WS1,Main,Main Lab
127.0.0.2,Main Lab WS2,Main,Main Lab
127.0.0.3,Main Lab WS3,Main,Main Lab
127.0.0.4,Main Lab WS4,Main,Main Lab
127.0.0.5,Main Lab WS5,Main,Main Lab
1. Export student, teacher and class information from the third-party application to a
CSV file.
N O T E
See the third-party application’s Help for instructions on exporting information to CSV files.
2. Open the CSV file using Excel® or another application that can open CSV files.
1 5 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
3. Ensure the CSV file contains the following columns:
Column Name
Person ID
Req’d?
Yes
Type
String
Last Name
First Name
Title
Class ID
Class Title
Type
Yes
Yes
No
No
No
Yes
String
String
String
String
String
Integer
(0 or 1)
Description
The student’s or the teacher’s unique ID.
N O T E
The ID must be unique to the student or teacher. For example, a student and a teacher can’t both have the ID
123456.
The student’s or the teacher’s last name.
The student’s or the teacher’s first name.
The student’s or the teacher’s title (for example,
Mr., Ms., or Dr.).
N O T E
SMART Sync
Administrator Tool only stores this information for teachers.
The unique ID of the student’s or the teacher’s class.
The name of the student’s or the teacher’s class.
If appropriate, include the class’s period to distinguish it from other classes.
0 for a student.
OR
1 for a teacher.
N O T E S o The first row of the spreadsheet must contain the column names as listed in the previous table.
o The string columns can contain any character except commas (,).
1 6 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
The following is an example:
To create a computer lab
CSV file
4. Save the CSV file.
1. Export computer lab information from the third-party application to a CSV file.
N O T E
See the third-party application’s Help for instructions on exporting information to CSV files.
2. Open the CSV file using Excel or another application that can open CSV files.
1 7 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
3. Ensure the CSV file contains the following columns:
Column Name
Hostname
Req’d?
Yes
Type
String
Workstation Name No
Lab ID
Lab Title
Yes
Yes
String
String
String
Description
The computer’s host name or IP address (for example,
127.0.0.1).
N O T E
If your network uses
DHCP, refer to the computer by host name rather than by
IP address.
The computer’s name.
The unique ID of the computer’s lab.
The name of the computer’s lab.
N O T E S o The first row of the spreadsheet must contain the column names as listed in the previous table.
o The string columns can contain any character except commas (,).
The following is an example:
4. Save the CSV file.
1 8 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To create a new SMART
School file
To open an existing
SMART School file
Creating or Opening a SMART School File
The first step in setting up a SMART School file is to start SMART Sync Administrator
Tool, and then create or open the file.
1. Double-click the SMART Sync Administrator Tool 2010 icon on your desktop.
OR
Select Start > All Programs > SMART Technologies > SMART Sync >
SMART Sync Administrator Tool 2010.
The SMART Sync Administrator Tool window appears.
2. Click School File.
3. Click Create a new SMART School file and save it as.
4. Click Browse.
The Select School File Location dialog box appears.
5. Browse to the folder where you want to create the SMART School file.
I M P O R T A N T
For security reasons, create the SMART School file in a folder accessible to teachers and network administrators, but not to students.
6. Type a name in the File name box.
7. Click Save.
The Select School File Location dialog box closes, and the path to the SMART
School file appears in the box below the Create a new SMART School file and
save it as option.
1. Double-click the SMART Sync Administrator Tool 2010 icon on your desktop.
OR
Select Start > All Programs > SMART Technologies > SMART Sync >
SMART Sync Administrator Tool 2010.
The SMART Sync Administrator Tool window appears.
2. Click School File.
3. Click Edit the existing SMART School file in this location.
1 9 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
4. Click Browse.
The Open School File dialog box appears.
5. Browse to and select the SMART School file.
6. Click Open.
The Open School File dialog box closes, and the path to the SMART School file appears in the box below the Edit the existing SMART School file in this location option.
To locate SMART Sync
Class List Server
Locating SMART Sync Class List Server
You must enter the host name or IP address of the computer hosting SMART Sync
Class List Server in your SMART School files.
1. Ensure SMART Sync Class List Server is running (see Stopping and Restarting
SMART Sync Class List Server on page 28).
2. Create or open a SMART School file (see Creating or Opening a SMART School
3. Click Class List Server.
4. Type the host name or IP address of the computer hosting SMART Sync Class
List Server in the Enter the IP address or hostname of your Class List Server box.
N O T E S o SMART Sync Class List Server uses port number 46200 by default.
However, you can change the port number (see Changing the
SMART Sync Class List Server Port Number on page 30). If you do
so, you must include the port number after the host name or IP address (for example, 127.0.0.1:46201).
o If your network uses DHCP, refer to the SMART Sync Class List
Server computer by host name rather than by IP address.
5. Click Test Connection to test the connection to the SMART Sync Class List
Server computer.
Importing School Information
You can manually enter students, teachers, classes and computer labs in SMART
School files using SMART Sync Administrator Tool. Alternatively, you can import this
2 0 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To import school information
information from CSV files generated from third-party applications (see Using
Information from Third-Party Applications on page 14).
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Import Information.
3. Click Browse to the right of the Student, Teacher, Class CSV file Location box.
The Open Classes CSV File dialog box appears.
4. Navigate to and select a student, teacher and class CSV file.
5. Click Open.
The Open Classes CSV File dialog box closes, and the path to the CSV file appears in the Student, Teacher, Class CSV file Location box.
6. Click Browse to the right of the Computer, Lab CSV File Location box.
The Open Labs CSV File dialog box appears.
7. Navigate to and select a computer lab CSV file.
8. Click Open.
The Open Labs CSV File dialog box closes, and the path to the CSV file appears in the Computer, Lab CSV File Location box.
To add a student
Entering Student, Teacher and Class Information
You can import student, teacher, and class information from a CSV file (see Importing
School Information on previous page). Alternatively, you can manually enter student,
teacher and class information in a SMART School file using SMART Sync Administrator
Tool.
Entering Student Information
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Students.
3. Click Add Student.
A new row appears in the table.
4. Type the student’s last name in the Last Name column.
2 1 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To remove a student
5. Type the student’s first name in the First Name column.
6. Type the student’s ID in the Student ID column.
N O T E
SMART Sync Administrator Tool generates a random ID for the student if you don’t specify one.
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Students.
3. Select the student’s row in the table.
4. Click Remove Student.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
To add a teacher
Entering Teacher Information
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Teachers.
3. Click Add Teacher.
A new row appears in the table.
4. Type the teacher’s last name in the Last Name column.
5. Type the teacher’s first name in the First Name column.
6. Type the teacher’s title in the Title column (for example, Mr., Ms. or Dr.).
To remove a teacher
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2 2 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
2. Click Teachers.
3. Select the teacher’s row in the table.
4. Click Remove Teacher.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
To add a class
Entering Class Information
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Classes.
3. Click Add.
A new row appears in the table.
4. Type a name in the Class Name column (for example, 5th Grade Math).
If appropriate, include the class’s period to distinguish it from other classes.
5. Select the name of a teacher or student you want to include in the class in the All
Students and Teachers list, and then click list.
to move it to the Class Members
N O T E S o In the All Students and Teachers and Class Members lists, teachers’ names appear in red text and students’ names appear in black text.
o To remove teachers or students from a class, select their names in the Class Members list, and then click
Students and Teachers list.
to move them to the All
6. Repeat step 5 for each teacher or student that you want to add to the class.
2 3 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To remove a class
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Classes.
3. Select the class’s row in the table.
4. Click Remove.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
To add a computer lab
Entering Computer Lab Information
You can import computer lab information from a CSV file (see Importing School
Information on page 19). Alternatively, you can manually enter computer lab information
in a SMART School file using the Computer Labs section of SMART Sync Administrator
Tool.
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Computer Labs.
3. Click Add.
A new row appears in the computer lab table.
4. Type a name in the Lab Name column (for example, Main Lab).
5. Click Add Computer.
A new row appears in the computer table.
2 4 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To remove a computer lab
6. Type the host name or IP address of the computer in the Hostname column (for example, 127.0.0.1).
N O T E
If your network uses DHCP, refer to the computer by host name rather than by IP address.
7. Type the name of the computer in the Workstation Name column (for example,
Main Lab WS1).
8. Repeat steps 5 to 7 for each computer you want to add to the computer lab.
N O T E
To remove a computer from the computer lab, select the computer, and then click Remove Computer.
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Computer Labs.
3. Select the computer lab’s row in the computer lab table.
4. Click Remove.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
Creating Administered Application Blocking Rules
An application blocking rule allows teachers either to allow specific applications and block all others or to block specific applications and allow all others. For example, an
English teacher could allow access to Microsoft Word but block access to all other applications during the writing of an English paper.
Teachers can individually create and share application blocking rules in SMART Sync
Teacher. Alternatively, you can create centrally administered application blocking rules and include them in a SMART School file.
2 5 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To create a rule
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Application Blocking.
3. Click Add.
A new row appears in the application blocking rule table.
4. Type a name in the Rule Name column (for example, English Paper).
5. Select Block all applications except those listed below to block all applications except those you include in the rule.
OR
Select Allow all applications except those listed below to allow all applications except those you include in the rule.
6. Click Add Application.
The Select Application dialog box appears.
7. Navigate to and select the application’s executable (.exe) file.
T I P
Most executable files are located in C:\Program Files.
8. Click Open.
The Select Application dialog box closes, and a new row appears in the application table.
9. Type a name for the application in the Display Name column if you don’t want to use the default name.
10. Repeat steps 6 to 9 or each application you want to add to the application blocking rule.
N O T E
To remove an application from the application blocking rule, select the application, and then click Remove Application.
To delete a rule
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Application Blocking.
2 6 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
3. Select the rule’s row in the application blocking rule table.
4. Click Remove.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
To create a rule
Creating Administered Internet Blocking Rules
An Internet blocking rule allows teachers either to allow specific websites and block all others or to block specific websites and allow all others. For example, a history teacher could block access to online encyclopedias and other history resources during the writing of a history paper.
Teachers can individually create and share Internet blocking rules in SMART Sync
Teacher. Alternatively, you can create centrally administered Internet blocking rules and include them in a SMART School file.
1. Create or open a SMART School file (see Creating or Opening a SMART School
2. Click Internet Blocking.
3. Click Add.
A new row appears in the Internet blocking rule table.
4. Type a name in the Rule Name column (for example, History Paper).
5. Select Block all websites except those listed below to block all websites except those you include in the rule.
OR
Select Allow all websites except those listed below to allow all websites except those you include in the rule.
6. Click Add Website.
A new row appears in the website table.
2 7 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To delete a rule
7. Type the address of the website in the Website Address column (for example,
www.example.com).
8. Repeat steps 6 to 7 for each website you want to add to the Internet blocking rule.
N O T E
To remove a website from the Internet blocking rule, select the website, and then click Remove Website.
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Internet Blocking.
3. Select the rule’s row in the Internet blocking rule table.
4. Click Remove.
The Confirm Deletion dialog box appears.
5. Click Yes.
T I P
Select the Don’t warn me again this session check box to prevent the
Confirm Deletion dialog box from reappearing for the remainder of the
session.
Reviewing the SMART School File
After setting up a SMART School file, you can review it in the Summary section and then close SMART Sync Administrator Tool to save the file. You should complete the following tasks before reviewing and saving the file: l
Locate SMART Sync Class List Server (see Locating SMART Sync Class List
l
Import school information (see Importing School Information on page 19).
OR
Enter student, class and teacher information (see Entering Student, Teacher and
Class Information on page 20) and computer lab information (see Entering
Computer Lab Information on page 23).
l
Create administered application blocking rules (see Creating Administered
Application Blocking Rules on page 24).
2 8 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To review the SMART
School file l
Create administered Internet blocking rules (see Creating Administered Internet
1. Open a SMART School file (see Creating or Opening a SMART School File on page 18).
2. Click Summary.
If any warnings appear, read them and take the appropriate actions.
3. Click Exit.
Configuring SMART Sync Class List
Server
SMART Sync Class List Server is a Windows service that connects SMART Sync
Teacher and SMART Sync Student installations in your school.
In most situations, you don’t need to make any changes to SMART Sync Class List
Server after installation. However, in some situations, you may need to do the following: l
Stop and restart SMART Sync Class List Server.
l
Change the SMART Sync Class List Server port number.
N O T E
These procedures may vary depending on your version of Windows operating system and your system preferences.
Stopping and Restarting SMART Sync Class List Server
SMART Sync Class List Server starts automatically after you install it and each time you turn on the computer. You can manually stop and then restart SMART Sync Class
List Server if necessary.
2 9 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To stop Class List Server from a command prompt
Stopping SMART Sync Class List Server
1. Open a Command Prompt window.
2. Navigate to the folder containing the SMART Sync Class List Server executable file.
N O T E
In most installations, this folder is %PROGRAMFILES%\SMART
Technologies\SMART Sync 2010.
3. Type the following command:
SMARTSyncClassListServer.exe -stop
4. Press ENTER.
SMART Sync Class List Server stops.
To stop Class List Server from the Services window
1. Open the Control Panel.
2. Double-click Administrative Tools.
3. Double-click Services.
The Services window appears.
4. Scroll to and select SMART Sync Class List Server.
5. Click Stop.
SMART Sync Class List Server stops.
To restart Class List
Server from a command prompt
Restarting SMART Sync Class List Server
1. Open a Command Prompt window.
2. Navigate to the folder containing the SMART Sync Class List Server executable file.
N O T E
In most installations, this folder is %PROGRAMFILES%\SMART
Technologies\SMART Sync 2010.
3 0 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
To restart Class List
Server from the Services window
3. Type the following command:
SMARTSyncClassListServer.exe -start
4. Press ENTER.
SMART Sync Class List Server starts.
1. Open the Control Panel.
2. Switch to Classic view if necessary, and then double-click Administrative
Tools.
3. Double-click Services.
The Services window appears.
4. Scroll to and select SMART Sync Class List Server.
5. Click Start.
SMART Sync Class List Server starts.
To change the port
number
Changing the SMART Sync Class List Server Port Number
The default port number of SMART Sync Class List Server is 46200. You can change the port number if necessary.
1. Stop SMART Sync Class List Server (see Stopping SMART Sync Class List
2. Open a Command Prompt window.
3. Navigate to the folder containing the SMART Sync Class List Server executable file.
N O T E
In most installations, this folder is %PROGRAMFILES%\SMART
Technologies\SMART Sync 2010.
4. Type the following command:
SMARTSyncClassListServer.exe -u
5. Press ENTER.
The SMART Sync Class List Server service uninstalls.
3 1 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
6. Type the following command:
SMARTSyncClassListServer.exe -i [Port number]
7. Press ENTER.
The SMART Sync Class List Server service reinstalls with the new port number.
8. Restart SMART Sync Class List Server (see Restarting SMART Sync Class List
To run the SMART Sync
Student Configuration
Tool
Configuring SMART Sync Student
Use SMART Sync Student Configuration Tool to configure SMART Sync Student after installation. The tool creates a new file, SyncClient.ini, which you can then use to configure other SMART Sync Student installations without running the SMART Sync
Student Configuration Tool each time.
Running the SMART Sync Student Configuration Tool
If you want to configure a SMART Sync Student installation, you can manually run the
SMART Sync Student Configuration Tool.
1. Select Start > All Programs > SMART Technologies > SMART Sync >
SMART Sync Student Configuration Tool 2010.
OR
Navigate to and open %PROGRAMFILES%\SMART Technologies\SMART
Sync Student\StudentConfig.exe.
The SMART Sync Student Configuration Tool dialog box appears.
2. Click Next.
3 2 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
3. Select one of the following options:
Option
Visible to students
Hidden from students
Select this option to:
Show the SMART Sync user interface to the
student.
Hide the SMART Sync user interface from the
student.
N O T E
If you click Hidden from students, the student won’t be able to do the following: o Connect to a teacher by selecting the teacher’s name from a list o Manually start SMART Sync Student o Manually enter an ID after starting SMART Sync Student
The relevant controls in SMART Sync Student Configuration Tool will be disabled or hidden.
3 3 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
4. Select one of the following options:
Option
Allows the student to select from a list of available teachers
Automatically connects with this Teacher ID
Automatically connects with this hostname or IP address
Uses this Class List
Server hostname or IP address
Select this option to:
Allow the student to select a teacher from a list.
N O T E
This option is disabled if you clicked
Hidden from student in step 3.
Connect SMART Sync to a specific teacher through the teacher’s ID.
Type the ID in the box to the right of the option.
Connect SMART Sync to a specific teacher through the host name or IP address.
Type the host name or IP address in the box to the right of the option.
N O T E
If your network uses DHCP, refer to the computer by host name rather than by IP
address.
Connect SMART Sync to a specific teacher using
SMART Sync Class List Server.
Type the host name or IP address of the SMART
Sync Class List Server computer in the box to the right of the option.
N O T E
If your network uses DHCP, refer to the
SMART Sync Class List Server computer by host name rather than by IP address.
5. If the computer has multiple network adapters, click Network Adapter Selection to specify the order of the network adapters.
6. Click Next.
7. Clear the Start SMART Sync Student automatically… check box if you don’t want SMART Sync Student to start when the student first logs on.
N O T E
This check box is disabled if you selected Hidden from student in step 3.
3 4 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
8. Select the following check box, and then click Next.
Check Box Select this check box to:
Ask questions
Chat
Allow the student to ask questions through SMART
Sync.
Allow the student to chat with other students through SMART Sync.
Submit files Allow the student to submit files through SMART
Sync.
Exit the Student program Allow the student to close SMART Sync Student.
N O T E
These check boxes aren’t visible if you clicked Hidden from student in step 3.
9. Select one of the following options, and then click Next.
Option
Student Controlled
The following
Found in this Active
Directory field…
Anonymous
Select this option to:
Allow the student to enter an ID when SMART
Sync Student starts.
N O T E
This option is disabled if you selected
Hidden from student in step 3.
Enter a specific student ID.
Type the ID in the box to the right of the option.
Find the student ID in an Active Directory directory service field of the student’s login account.
Type the Active Directory directory service field name in the box to the right of the option.
Allow the student to use SMART Sync Student without entering an ID.
10. Select one of the following options, and then click Next.
Option
My Documents folder
Custom folder
Click this option to:
Store files the teacher shares with the student in the My Documents folder (Windows XP and
Windows 7) or the Documents folder (Windows
Vista).
Store files in another folder.
Type the path to the folder in the box below the option.
3 5 | C H A P T E R 3 – C O N F I G U R I N G S M A R T S Y N C
11. Select one of the following options, and then click Next.
Option
No security
Allow only teachers with this class password
Allow only Teachers who are part of the following group(s)
Select this option to:
Allow any teacher with SMART Sync Teacher to connect to the student.
Allow only teachers who enter a specified password in SMART Sync Teacher to connect to the student.
Type the password in the two boxes to the right of the option.
Allow only teachers in certain groups to connect to the student.
Select the groups in the box below the option.
12. Click Finish.
The Restart Required to Apply Settings message appears.
13. Click OK.
14. Restart the computer.
Automatically Configuring SMART Sync Student Installations
After you configure one SMART Sync Student installation, copy its SyncClient.ini file to a central location on your network. (The SyncClient.ini file is located in
%PROGRAMFILES%\SMART Technologies\SMART Sync Student.) You can then: l
Copy the file to other SMART Sync Student installations to configure them automatically without running the configuration tool.
l
Refer to the file when installing SMART Sync Student using the command line interface.
Chapter 4
Modifying or Removing
SMART Sync
Using the Command Line Interface
Adding or Removing SMART Sync Teacher Components
Removing SMART Sync Teacher and Student
Using Third-Party Imaging or Remote Management Software
After installing SMART Sync, you may need to modify it or remove it. You can use the same tools you used to install SMART Sync to modify or remove it.
Using the Command Line Interface
Using the SMART Sync Teacher and SMART Sync Student installation packages (see
page 6), you can complete the following tasks from a command line interface:
l
Adding or removing SMART Sync Teacher components l
Removing SMART Sync Teacher l
Removing SMART Sync Student
Adding or Removing SMART Sync Teacher Components
After installing the SMART Sync Teacher on a computer, you may decide to add or remove components. For example, you may have installed SMART Sync Teacher on the same computer you now want to install SMART Sync Class List Server and
Administrator Tool on.
3 8 | C H A P T E R 4 – M O D I F Y I N G O R R E M O V I N G S M A R T S Y N C
To add a component
1. Open a Command Prompt window.
2. Type the following command: msiexec /i "[Path]\SMART Sync 2010.msi" [Installation
properties] [Add properties] /q
Where: o [Path] is the path to the SMART Sync 2010.msi file.
o [Installation properties] are the INSTALL properties of the components already installed.
T I P
If SMART Sync Teacher is already installed, you don’t need to include the INSTALLTEACHER property, as it’s enabled by default.
o [Add properties] is the set of properties for the component you want to add:
Components Add Properties
Teacher INSTALLTEACHER="1" REINSTALLMODE=voums
ADDLOCAL=Teacher
Class List Server INSTALLCLASSLISTSERVER="1"
REINSTALLMODE=voums
ADDLOCAL=ClassListServer
Administrator
Tool
INSTALLADMINTOOL="1"
REINSTALLMODE=voums ADDLOCAL=AdminTool
3. Press ENTER.
Windows Installer adds the component you specified.
3 9 | C H A P T E R 4 – M O D I F Y I N G O R R E M O V I N G S M A R T S Y N C
To remove a component
1. Open a Command Prompt window.
2. Type the following command: msiexec /i "[Path]\SMART Sync 2010.msi" [Remove
properties] /q
Where: o [Path] is the path to the SMART Sync 2010.msi file.
o [Remove properties] is the set of properties for the component you want to remove:
Components Add Properties
Teacher INSTALLTEACHER="" REINSTALLMODE=voums
REMOVE=Teacher
Class List Server INSTALLCLASSLISTSERVER=""
REINSTALLMODE=voums
REMOVE=ClassListServer
Administrator
Tool
INSTALLADMINTOOL="" REINSTALLMODE=voums
REMOVE=AdminTool
3. Press ENTER.
Windows Installer removes the component you specified.
Component Addition Examples
The following example installs SMART Sync Administrator Tool on a computer that already has SMART Sync Teacher (but not SMART Sync Class List Server): msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi"
INSTALLADMINTOOL=1 REINSTALLMODE=voums ADDLOCAL=AdminTools
/qb
The following example installs SMART Sync Teacher on a computer that already has
SMART Sync Administrator Tool (but not SMART Sync Class List Server): msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi"
INSTALLADMINTOOL=1 INSTALLTEACHER=1 REINSTALLMODE=voums
ADDLOCAL=Teacher /qb
4 0 | C H A P T E R 4 – M O D I F Y I N G O R R E M O V I N G S M A R T S Y N C
The following example installs SMART Sync Class List Server on a computer that already has SMART Sync Teacher and Administrator Tool: msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi"
INSTALLADMINTOOL=1 INSTALLCLASSLISTSERVER=1
REINSTALLMODE=voums ADDLOCAL=ClassListServer /qb
Component Removal Examples
The following example removes SMART Sync Administrator Tool: msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi"
INSTALLADMINTOOL="" REINSTALLMODE=voums REMOVE=AdminTools /qb
To remove SMART Sync
Teacher
Removing SMART Sync Teacher and Student
1. Open a Command Prompt window.
2. Type the following command: msiexec /x "[Path]\SMART Sync 2010.msi" /q
Where [Path] is the path to the SMART Sync 2010.msi file.
3. Press ENTER.
Windows Installer removes SMART Sync Teacher.
To remove SMART Sync
Student
1. Open a Command Prompt window.
2. Type the following command: msiexec /x "[Path]\SMART Sync Student 2010.msi" /q
Where [Path] is the path to the SMART Sync Student 2010.msi file.
3. Press ENTER.
Windows Installer removes SMART Sync Student.
4 1 | C H A P T E R 4 – M O D I F Y I N G O R R E M O V I N G S M A R T S Y N C
To remove a deployed installation package
Using Third-Party Imaging or Remote
Management Software
Using third-party imaging or remote management software, you can remove SMART
Sync.
The following procedure shows how to remove SMART Sync using Windows operating systems’ Group Policy-based deployment software. For information on removing software using your organization’s third-party imaging or remote management software, see the software documentation.
N O T E
This procedure may vary depending on your version of Windows operating system and your system preferences.
1. Open the Control Panel.
2. Double-click Administrative Tools.
3. Double-click Active Directory Users and Computers.
The Active Directory Users and Computers window appears.
4. Right-click your school’s domain, and then select Properties.
The Properties dialog box appears.
5. Click the Group Policy tab, and then click Edit.
The Group Policy Object Editor dialog box appears.
6. Browse to and open Computer Configuration\Software Settings\Software
Installation.
7. Right-click the software you want to remove, and then select All Tasks >
Remove.
8. Select Immediately uninstall the software from users and computers, and then click OK.
The next time each computer on the domain starts, it automatically removes the software.
Appendix A
Windows Installer
Properties, Parameters and
Examples
SMART Sync Teacher Installation Package
SMART Sync Student Installation Package
SMART Sync Teacher Installation Package
SMART Sync Student Installation Package
Basic Installation with No Restart
Customization Using a SyncClient.ini File
Customization Using Command Line Properties
The SMART Sync installation packages contain all of the information that Windows
Installer requires to install or remove the SMART Sync components. Run the MSI files from a command prompt to start Windows Installer and install or modify the software using available properties and parameters.
4 4 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S
Properties
SMART Sync Teacher Installation Package
The following are properties for the SMART Sync Teacher installation package: l
INSTALLDIR
Value
[String]
Enter this value to:
Specify the path to your preferred folder for SMART Sync.
N O T E
If you don’t include this property, Windows Installer installs SMART Sync in C:\Program Files\SMART Technologies\SMART Sync 2010.
l
INSTALLTEACHER
Value
1
[Null]
Enter this value to:
(Default) Install SMART Sync Teacher.
Not install SMART Sync Teacher.
l
INSTALLCLASSLISTSERVER
Value
1
[Null]
Enter this value to:
Install SMART Sync Class List Server.
(Default) Not install SMART Sync Class List Server.
l
INSTALLADMINTOOL
Value
1
[Null]
Enter this value to:
Install SMART Sync Administrator Tool.
(Default) Not install SMART Sync Administrator Tool.
l
ISX_SERIALNUM
Value
[String]
Enter this value to:
Specify the 22-character product key you received from
SMART Technologies.
4 5 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
INSTALL_SPU
Value
1
[Null]
Enter this value to:
(Default) Install SMART Product Update.
Not install SMART SMART Product Update.
l
PRODUCT_NOTIFICATION
Value
1
[Null]
Enter this value to:
(Default) Notify the user when updates are available from SMART
Product Update.
Not notify the user when updates are available from SMART
Product Update.
N O T E
This property is only applicable if you install SMART Product Update.
l
SPU_TIME_FRAME
Value
[Integer]
Enter this value to:
Specify the time in days between SMART Product Update checks.
N O T E S o By default, SMART Product Update checks for product updates every 30 days. You can set it to check for product updates at intervals of one to 60 days.
o This property is only applicable if you install SMART Product
Update.
l
SCHOOLFILE
Value
[String]
Enter this value to:
Specify the path to the SMART School file.
N O T E
Before you can specify the path to a SMART School file, you must install
SMART Sync Administrator Tool, and then use it to create the SMART
School file.
4 6 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
TRANSFORMS
Value
[String]
Enter this value to:
Specify a language MST file for the installation.
N O T E S o
See Locating Language Files on page 7 for a list of supported
languages and their MST files.
o Ensure the specified MST file is in the same folder as the MSI file.
o If you don’t specify a language using TRANSFORMS, SMART
Sync uses the computer’s system language, if it is one of the languages supported by SMART Sync, or English (U.S.), if otherwise.
SMART Sync Student Installation Package
The following are properties for the SMART Sync Student installation package: l
INSTALLDIR
Value
[String]
Enter this value to:
Specify the path to your preferred folder for SMART Sync.
N O T E
If you don’t include this property, Windows Installer installs SMART Sync in C:\Program Files\SMART Technologies\SMART Sync Student.
l
CREATE_SHORTCUTS
Value
1
[Null]
Enter this value to:
(Default) Include shortcuts to SMART Sync in the Start menu and on the desktop.
Not include shortcuts to SMART Sync in the Start menu and on the desktop.
4 7 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
PATHTOINI
Value
[String]
Enter this value to:
Specify the full path and file name for the SyncClient.ini file.
N O T E S o If you’ve previously installed SMART Sync, you can run the SMART
Sync Student Configuration Tool to create a SyncClient.ini file, which you can then refer to in this property.
o If you don’t include this property, you can configure SMART Sync using the SYNC_* properties described below.
o If you don’t include this property or the SYNC_* properties, Windows
Installer refers to the SyncClient.ini file in the same folder as the
MSI file. If Windows Installer can’t find a SyncClient.ini file in this folder, it uses a default SyncClient.ini file.
l
SYNC_VISIBLE
Value
1
0
Enter this value to:
(Default) Show the SMART Sync Student user interface to the user.
Hide the SMART Sync Student user interface from the user.
l
SYNC_CONTEACHID
Value
[String]
Enter this value to:
Specify a teacher ID to which SMART Sync will connect automatically.
N O T E S o If you set SYNC_VISIBLE to 0, you must include this property,
SYNC_CONNECTIP or SYNC_NAMINGSERVERLOC.
o If you include this property, don’t include SYNC_CONNECTIP and
SYNC_NAMINGSERVERLOC.
4 8 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
SYNC_CONNECTIP
Value
[String]
Enter this value to:
Specify a teacher host name or IP address to which SMART
Sync will connect automatically.
N O T E S o If you set SYNC_VISIBLE to 0, you must include this property,
SYNC_CONTEACHID or SYNC_NAMINGSERVERLOC.
o If you include this property, don’t include SYNC_CONTEACHID and SYNC_NAMINGSERVERLOC.
l
SYNC_NAMINGSERVERLOC
Value
[String]
Enter this value to:
Specify a SMART Sync Class List Server host name or IP address to which SMART Sync Student will connect automatically.
N O T E S o If you set SYNC_VISIBLE to 0, you must include this property,
SYNC_CONTEACHID or SYNC_CONNECTIP.
o If you include this property, don’t include SYNC_CONTEACHID and SYNC_CONNECTIP.
l
SYNC_AUTOSTART
Value
1
0
Enter this value to:
(Default) Start SMART Sync when the student first logs on.
Not start SMART Sync when the student first logs on.
N O T E
This property is only applicable if you set SYNC_VISIBLE to 1.
4 9 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
SYNC_ENABLEQUESTIONS
Value
1
0
Enter this value to:
(Default) Allow the student to ask questions through SMART Sync.
Not allow the student to ask questions through SMART
Sync.
N O T E
This property is only applicable if you set SYNC_VISIBLE to 1.
l
SYNC_ENABLECHAT
Value
1
0
Enter this value to:
(Default) Allow the student to chat with other students through
SMART Sync.
Not allow the student to chat with other students through
SMART Sync.
N O T E
This property is only applicable if you set SYNC_VISIBLE to 1.
l
SYNC_ENABLEFILETRANSFER
Value
1
0
Enter this value to:
(Default) Allow the student to submit files through SMART Sync.
Not allow the student to submit files through SMART Sync.
N O T E
This property is only applicable if you set SYNC_VISIBLE to 1.
l
SYNC_DISPLAYEXIT
Value
1
0
Enter this value to:
Allow the student to close SMART Sync.
(Default) Not allow the student to close SMART Sync.
N O T E
This property is only applicable if you set SYNC_VISIBLE to 1.
5 0 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S l
SYNC_STUDIDMODE
Value
0
1
2
3
Enter this value to:
Use a student ID found in an Active Directory directory service field specified in SYNC_ACTDIRSTUDID.
Use a student ID specified in SYNC_STUDENTID.
Allow the student to enter an ID when SMART Sync
Student starts.
Allow the student to use SMART Sync Student without entering an ID.
N O T E S o If you set SYNC_VISIBLE to 1, this property’s default value is 2.
o If you set SYNC_VISIBLE to 0, this property’s default value is 1. In this situation, you must include STUDENT_ID.
l
SYNC_STUDENTID
Value
[String]
Enter this value to:
Specify a student ID.
N O T E S
If you include this property, SYNC_STUDIDMODE is set to 1 automatically.
l
SYNC_ACTDIRSTUDID
Value
[String]
Enter this value to:
Specify the name or ID of an Activity Directory directory service field that contains the student’s ID.
N O T E S
If you include this property, SYNC_STUDIDMODE is set to 0 automatically.
l
SYNC_CUSTSHRDFOLDER
Value
[Null]
[String]
Enter this value to:
(Default) Store files the teacher shares with the student in the My
Documents folder (Windows XP and Windows 7) or
Documents folder (Windows Vista).
Store files the teacher shares with the student in another folder specified in this property.
5 1 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S
Parameters
The following are the parameters for SMART Sync:
/qr
/qf
/qn
/qn+
/qb
/qb!
/qb+
/qb+!
N O T E
These are standard Windows Installer parameters.
Parameter
/q
Use this parameter to:
Hide the installation wizard.
N O T E
This is Silent mode.
Show a basic installation wizard.
Show a basic installation wizard without a Cancel button.
Show a basic installation wizard with a dialog box signaling the end of the installation.
Show a basic installation wizard without a Cancel button but with a dialog box signaling the end of the installation.
Show a reduced installation wizard.
Show the full installation wizard, including a dialog box signaling the end of the installation or the Fatal Error, User Exit or Exit dialog box.
Hide the installation wizard and the dialog box signaling the end of the installation.
Hide the installation wizard but show the dialog box signaling the end of the installation.
Examples
SMART Sync Teacher Installation Package
The following example installs SMART Sync Teacher but not SMART Sync Class List
Server or Administrator Tool: msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi" /qb
5 2 | A P P E N D I X A – W I N D O W S I N S T A L L E R P R O P E R T I E S , P A R A M E T E R S
A N D E X A M P L E S
The following example installs SMART Sync Class List Server and Administrator Tool but not SMART Sync Teacher: msiexec /i "D:\TeacherSetup\SMART Sync 2010.msi"
INSTALLCLASSLISTSERVER="1" INSTALLADMINTOOL="1" /qb
SMART Sync Student Installation Package
Basic Installation with No Restart
The following example installs SMART Sync Student but prevents the computer from restarting automatically after the installation is complete: msiexec /i "D:\StudentSetup\SMART Sync Student 2010.msi" /qb
-norestart
Customization Using a SyncClient.ini File
The following example customizes SMART Sync Student using a SyncClient.ini file: msiexec /i "D:\StudentSetup\SMART Sync Student 2010.msi"
PATHTOINI="C:\Sync\StudentConfig\SyncClient.ini" /qb
Customization Using Command Line Properties
The following example customizes SMART Sync Student using command line properties: msiexec /i "D:\StudentSetup\SMART Sync Student 2010.msi"
SYNC_VISIBLE="1" SYNC_CONTEACHID="jsmith" SYNC_ENABLECHAT="0"
SYNCSTUDIDMODE="2" SYNC_CUSTSHRDFOLDER="C:\SyncShare" /qb
Appendix B
SMART Install Manager
Installing SMART Install Manager
Opening an Installation Package
Publishing Your Changes as an MST File
Customizing the SMART Sync Teacher Installation Package
Customizing the SMART Sync Student Installation Package
SMART Install Manager allows you to customize SMART software installation packages (also known as MSI files) by publishing MST files. You can then install the
MSI and MST files on computers using third-party imaging or remote management software.
To install the software from the CD
Installing SMART Install Manager
You can install SMART Install Manager from the included CD.
OR
You can download and install SMART Install Manager from the SMART Support website.
1. Insert the CD in your computer’s CD drive. A dialog box appears.
N O T E
If the dialog box doesn’t appear, browse to and open
[CD Drive]\CDBrowser.exe in Windows Explorer.
2. Click Administrator Preparation and Tools, and then click Install SMART
Install Manager.
The SMART Install Manager installation wizard appears.
3. Follow the on-screen instructions to install SMART Install Manager.
5 4 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
To install the software from the website
1. Go to www.smarttech.com/downloads .
2. Click the appropriate link under Admin tools.
3. Follow the on-screen instructions to download the Install Manager.exe file.
4. Double-click the Install Manager.exe file.
The SMART Install Manager installation wizard appears.
5. Follow the on-screen instructions to install SMART Install Manager.
Using SMART Install Manager
After you install SMART Install Manager, shortcuts to the software appear on the desktop and in the Start menu under All Programs > SMART Technologies >
SMART Install Manager.
With SMART Install Manager, you can do the following: l
Open an installation package.
l
Save your changes to the installation package.
l
Publish your changes to the installation packages as an MST file.
Opening an Installation Package
To customize an installation package, open its MSI file in SMART Install Manager by doing one of the following: l
Select File > Open.
l l
Click .
Click and drag the MSI file into the SMART Install Manager window.
Alternatively, you can search for installation packages on your computer by clicking , or on CDs or DVDs by clicking .
T I P
All installation packages you’ve previously opened in SMART Install Manager appear in the Unmodified Packages tab.
5 5 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
After you open an installation package, a set of pages for that installation package appear in SMART Install Manager:
Customize the installation package using the controls in these pages.
Saving Your Changes
After customizing an installation package, you can save your changes as an XML file by selecting File > Save As. When you next start SMART Install Manager, you can load the XML file by selecting File > Open, or by opening the MSI file, and then selecting File
> Import.
T I P
All XML files you create or open in SMART Install Manager appear in the Modified
Packages tab of the Welcome page.
Publishing Your Changes as an MST File
The final step in using SMART Install Manager to customize an installation package is to publish your changes as an MST file. Do this by selecting File > Publish, and then using the dialog box to define a location for and create the MST file.
T I P
Publish the MST file in the same network location as the MSI file.
5 6 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
To set installation options
To configure SMART
Product Update
Customizing the SMART Sync Teacher
Installation Package
To customize the SMART Sync Teacher installation package, open the SMART Sync
2010.msi file in SMART Install Manager (see Using SMART Install Manager on page
54), and then complete the following procedures.
1. Click Installation Options.
The Installation Options page appears.
2. In the Installation directory box, type the path to your preferred folder for SMART
Sync.
N O T E
If you don’t include this property, Windows Installer installs SMART Sync in C:\Program Files\SMART Technologies\SMART Sync 2010.
3. Select the check boxes of the software components you want to install.
4. Click Product Key.
The Product Key page appears.
5. In the Product key box, type your school’s 22-character product key for SMART
Sync.
1. Click SMART Product Update (SPU) Options.
The SMART Product Update (SPU) Options page appears.
2. Select the Install SMART Product Update check box to install SMART Product
Update.
3. In the Check for updates box, type the number of days between SMART Product
Update checks.
N O T E
By default, SMART Product Update checks for product updates every 30 days. You can set it to check for product updates at intervals of one to 60 days.
5 7 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
To specify a SMART
School file
4. Select the Notify users about SMART product updates check box to notify the user when product updates are available.
1. Click SMART School File.
The SMART School File page appears.
2. In the SMART School file box, type the path to the SMART School file.
OR
Click Browse, and then use the resulting dialog box to browse to and select the
SMART School file.
N O T E
Before you can specify the path to a SMART School file, you must install
SMART Sync Administrator Tool, and then use it to create the SMART
School file.
To set installation options
Customizing the SMART Sync Student
Installation Package
To customize the SMART Sync Student installation package, open the SMART Sync
When customizing the SMART Sync Student installation package, you can configure the software by using either a SyncClient.ini file or the controls in SMART Install
Manager.
1. Click Installation Options.
The Installation Options page appears.
2. In the Installation directory box, type the path to your preferred folder for SMART
Sync.
N O T E
If you don’t include this property, Windows Installer installs SMART Sync in C:\Program Files\SMART Technologies\SMART Sync Student.
5 8 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
To configure SMART Sync
Student using a
SyncClient.ini File
To configure SMART Sync
Student using SMART
Install Manager
3. Select the Install Start menu and desktop shortcuts check box to create shortcuts to SMART Sync in the Start menu and on the desktop.
1. Click Student Configuration File.
The Student Configuration File page appears.
2. In the Configuration file box, type the full path and file name for the SyncClient.ini file.
OR
Click Browse, and then use the resulting dialog box to browse to and select the
SyncClient.ini file.
N O T E
If you’ve previously installed SMART Sync, you can run the SMART Sync
Student Configuration Tool to create a SyncClient.ini file, which you can then refer to in this box.
1. Click Interface.
The Interface page appears.
2. Select one of the following options:
Option
Visible to students
Hidden from students
Select this option to:
Show the SMART Sync user interface to the student.
Hide the SMART Sync user interface from the student.
N O T E
If you click Hidden from students, the student won’t be able to do the following: o Connect to a teacher by selecting his or her name from a list o Manually start SMART Sync Student o Manually enter an ID after starting SMART Sync Student
3. Click Startup.
The Startup page appears.
5 9 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
4. Select one of the following options:
Option
Allows the student to select from a list of available teachers
Automatically connects with this Teacher ID
Automatically connects with this hostname or IP address
Uses this Class List
Server hostname or IP address
Select this option to:
Allow the student to select a teacher from a list.
N O T E
This option is disabled if you clicked
Hidden from student in step 2.
Connect SMART Sync to a specific teacher through the teacher’s ID.
Type the ID in the box to the right of the option.
Connect SMART Sync to a specific teacher through the host name or IP address.
Type the host name or IP address in the box below the option.
N O T E
If your network uses DHCP, refer to the computer by host name rather than by IP
address.
Connect SMART Sync to a specific teacher using
SMART Sync Class List Server.
Type the host name or IP address of the SMART
Sync Class List Server computer in the box below the option.
N O T E
If your network uses DHCP, refer to the
SMART Sync Class List Server computer by host name rather than by IP address.
I M P O R T A N T
If you clicked Hidden from student in step 2 but do not provide a teacher
ID, host name or IP address in this step, the student will not be able to connect to a teacher.
5. Click Options.
The Options page appears.
6. Clear the Start SMART Sync automatically… check box if you do not want
SMART Sync Student to start when the student first logs on.
N O T E
This check box is disabled if you selected Hidden from student in step 2.
6 0 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
7. Select the following check boxes:
Check Box Select this check box to:
Ask questions
Chat
Allow the student to ask questions through SMART
Sync.
Allow the student to chat with other students through SMART Sync.
Submit files Allow the student to submit files through SMART
Sync.
Exit the Student program Allow the student to close SMART Sync Student.
N O T E
These check boxes aren’t visible if you clicked Hidden from student in step 2.
8. Click Student ID.
The Student ID page appears.
9. Select one of the following options:
Option
Student Controlled
The following
Found in this Active
Directory field…
Anonymous
Select this option to:
Allow the student to enter an ID when SMART
Sync Student starts.
N O T E
This option is disabled if you clicked
Hidden from student in step 2.
Enter a specific student ID.
Type the ID in the box to the right of the option.
Find the student ID in an Active Directory directory service field of the student’s login account.
Type the Active Directory directory service field name in the box to the right of the option.
Allow the student to use SMART Sync Student without entering an ID.
10. Click Shared Files Folder.
The Shared Files Folder page appears.
6 1 | A P P E N D I X B – S M A R T I N S T A L L M A N A G E R
11. Select one of the following options:
Option
My Documents folder
Custom folder
Select this option to:
Store files the teacher shares with the student in the My Documents folder (Windows XP or
Windows 7) or Documents folder (Windows Vista).
Store files in another folder.
Type the path to the folder in the box below the option.
Toll Free 1.866.518.6791 (U.S./Canada) or +1.403.228.5940
www.smarttech.com
دانلود
پیوند عمومی به روز شد
پیوند عمومی به چت شما به روز شده است. You may view and manage your chat links after registration here.
پیوند عمومی سند
تبلیغات