Smart Technologies Response 2012 Administrator's Guide
تبلیغات
تبلیغات
Education Software
Installer 2012 SP1
Windows® operating systems
System administrator’s guide
This guide is available in
HTML
.
Scan the following QR code to read the HTML version of this guide on your smart phone or other mobile device.
Trademark notice
SMART Notebook, SMART Ink, SMART Response, SMART Sync, SMART Classroom Suite, Senteo, SMART Board, SMART Document Camera, SMART Vantage, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. Microsoft,
Windows, Windows Vista, Internet Explorer, ActiveX DirectX and Visual Studio are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the U.S. and/or other countries. InstallShield, is a registered trademark or trademark of Flexera Software, Inc. and/or InstallShield Co. Inc. in the United States of America and/or other countries. All other third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2012 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
09/2012
i
Installation overview
Task
Ensure your computers meet the minimum requirements.
Obtain the installation packages and supporting files.
If previous versions of the software are installed on your computer, remove them.
Customize the installation packages using SMART Install Manager.
OR
Customize the installation packages using a third-party tool.
Deploy the installation packages.
If the software didn’t activate during installation, activate it.
Reference
OR
OR
N O T E
Please send any feedback on this guide to [email protected]
.
iii
Contents
Installation packages and supporting files
Chapter 2: Customizing installation packages
Chapter 3: Deploying the software
Using the command line interface
Using third-party imaging or remote management software
Activating the software after installation
Chapter 4: Updating the software
Using a Windows Installer update installation package (MSI file)
Using a Windows Installer patch (MSP file)
Chapter 5: Removing the software
Using the command line interface
Using third-party imaging or remote management software
Appendix A: Windows Installer properties and parameters
Appendix B: Language files and codes
Installation language files and codes
Appendix C: Installing and maintaining Gallery content
Changing Gallery content locations
Appendix D: Removing previous versions of SMART Board software
Removing SMART Board software 9.x
Removing SMART Board software 8.x
C O N T E N T S
Removing SMART Board software 7.x
iv
Chapter 1:
1
Chapter 1
Getting started
Installation packages and supporting files
This guide explains how to customize and deploy the following software: l
SMART Notebook™ collaborative learning software 11 l
SMART Notebook Math Tools software l
3D Tools for SMART Notebook software l
SMART Product Drivers 11 l
SMART Ink™ l
SMART Response™ 2012 assessment software l
SMART Sync™ 2011 Teacher software l
SMART Classroom Suite™ Teacher software l
SMART Common Files
N O T E S
l
For information on customizing and deploying previous versions of this software, see the appropriate system administrator’s guides at smarttech.com/support .
l
For information on installing SMART Sync Student software, SMART Sync Class List
Server and SMART Sync Administrator Tool, see the
SMART Sync 2011 system administrator’s guide
( smarttech.com/kb/160490 ).
2
C H A P T E R 1
Getting started
This guide is intended for IT administrators and others experienced with customizing, deploying and administering Windows® software in a networked environment. To use this guide, you must l
Know IT terminology such as “registry” and “domain controller” l
Know how to complete basic administrative tasks in Windows operating systems such as modifying the registry l
Have administrative privileges and access to servers l
Have access to the DVD or to the Internet
I M P O R T A N T
You must run the commands documented in this guide in an
Administrator Command Prompt
window. To open an
Administrator Command Prompt
window, right-click the
Command Prompt
icon, and then select
Run as Administrator
.
Computer requirements
N O T E
Operating systems and other third-party software released after this SMART software might not be supported.
Before you install the software, ensure your teachers’ computers meet the minimum requirements: l
Pentium® 4 processor or better l
1 GB of RAM (2 GB recommended) l
Free hard disk space:
Software
SMART Notebook software
Gallery Essentials
Lesson Activity Toolkit
SMART Product Drivers
SMART Ink
SMART Response software
SMART Sync Teacher software
SMART Common Files
Recommended total free hard disk space
Space required
277 MB
549 MB
111 MB
110 MB
46 MB
89 MB
37 MB
111 MB
2.5 GB
C H A P T E R 1
Getting started l
Windows XP SP3, Windows Vista® SP2 or Windows 7 operating system l
Microsoft® .NET framework 4.0 client for SMART Notebook software and SMART Ink l
Microsoft Visual Studio® Tools for Office for SMART Ink l
Adobe® Flash® Player 11.4 ActiveX® control for SMART Notebook software l
Adobe Flash Player 11.4 Firefox® plug-in for SMART Notebook software and
SMART Response software l
DirectX® technology 8.1 or later for SMART Video Player l
DirectX 9 compatible graphics hardware for 3D Tools for SMART Notebook software l
Internet Explorer® Internet browser 6.0 or later
N O T E
If you’re deploying SMART software to Windows XP or Windows Vista computers, you must first install Windows Installer 4.5 on these computers. You can download Windows Installer 4.5 from support.microsoft.com/kb/942288 .
3
Installation packages and supporting files
Before you can customize or deploy SMART software, you must locate the installation packages and supporting files.
Installation packages
Before deploying the Education Software Installer installation package, you must deploy the following third-party installation packages:
If you want to install this software:
SMART Notebook software
SMART Product Drivers
(including SMART Ink)
SMART Response software
Deploy these installation packages:
l l l
Microsoft .NET framework 4.0 client files
(
dotNetFx40_Client_x86_x64.exe
)
Adobe Flash Player ActiveX control
(
install_flash_player_11_active_x.msi
)
Adobe Flash Player plug-in
(
install_flash_player_11_plugin.msi
) l l l
Microsoft.NET framework 4.0 client files
(
dotNetFx40_Client_x86_x64.exe
)
Microsoft Visual Studio Tools for Office
(
vstor40_x86.exe
for 32-bit computers or
vstor40_x64.exe
for 64-bit computers running
32-bit or 64-bit versions of Microsoft Office)
Adobe Flash Player plug-in
(
install_flash_player_11_plugin.msi
)
4
C H A P T E R 1
Getting started
N O T E
You can run the
dotNetFx40_Client_x86_x64.exe
file to install all required Microsoft .NET
framework prerequisites and the Microsoft .NET framework 4.0 client files. However, SMART recommends that you download the latest version of the Microsoft .NET framework files from the
Microsoft website. For information on deploying the Microsoft .NET framework, refer to the
.NET
framework deployment guide for administrators
on the MSDN website
( msdn.microsoft.com/en-us/library/ee390831.aspx
).
The third-party installation packages are located on the DVD in
[DVD drive]
:\Administrators\Windows\Education Software Install\Support
.
The Education Software Installer installation package (
SMART Education Software 2012.msi
) is located on the DVD in
[DVD drive]
:\Administrators\Windows\Education Software Install
.
Alternatively, you can download the installation packages in a .zip file from smarttech.com/administratordownloads . The installation packages are located in the
Support
folder of the .zip file.
I M P O R T A N T
SMART recommends that you deploy SMART software using the
SMART Education Software 2012.msi
installation package. However, if you choose to deploy the software using individual installation packages, you need to do the following: l
Deploy the
SMART Common Files.msi
file first.
l
If you use a custom value for the
INSTALLDIR
property, ensure this value is identical across all the installation packages.
Save the installation packages in a location on your network that’s accessible to all computers on which you plan to install the software.
Language files
If you plan to deploy the installation packages in a language other than English (U.S.), ensure the corresponding MST file for the language is in the same folder as the MSI file (see
Installation language files and codes
Similarly, if you want users to be able to view and use the software in a language other than English, you must download and install the appropriate language pack (see
5
C H A P T E R 1
Getting started
These language packs are located on the DVD under
[DVD drive]
:\Administrators\Windows\Education Software Install\Support\Languages
or in the downloaded .zip file under
Support\Languages
.
Service pack files
After deploying the software using the Education Software Installer 2012 installation package, you need to deploy the Education Software Installer 2012 SP1 patches.
If you deployed:
Any software in the Education Software Installer
SMART Notebook software
SMART Product Drivers
SMART Ink
SMART Response
Deploy this patch:
CommonFiles_11_1_x_1.msp
notebook11_sp1.msp
drivers11.0sp2patch.msp
SMARTInk1.1.PATCH.msp
response_4.0_sp1.msp
The patches are located on the DVD in
[DVD drive]
:\Administrators\Windows\
Education Software Install\Patches
.
Alternatively, you can download the patches from smarttech.com/administratordownloads .
Save the patches in a location on your network that’s accessible to all computers on which you’ve installed the software.
I M P O R T A N T
Deploy the
CommonFiles_11_1_x_1.msp
file first.
Chapter 2:
Chapter 2
Customizing installation packages
Installing SMART Install Manager
Opening an installation package
Publishing your changes as an MST file
Customizing the installation package
You can customize installation packages using SMART Install Manager.
OR
You can customize installation packages using third-party tools and Windows Installer properties.
Using SMART Install Manager
SMART Install Manager enables you to customize SMART software installation packages (also known as MSI files) by publishing MST files. You can then deploy the MSI and MST files to computers using third-party imaging or remote management software.
Installing SMART Install Manager
Install SMART Install Manager from the DVD.
OR
Download and install SMART Install Manager from the SMART Support website.
g
To install SMART Install Manager from the DVD
1. Insert the DVD in your computer’s DVD drive.
A dialog box appears.
7
C H A P T E R 2
Customizing installation packages
N O T E
If the dialog box doesn’t appear, browse to and open
[DVD drive]
\CDBrowser.exe
in
Windows Explorer.
2. Click
Administrator Preparation and Tools
, and then click
Install
SMART Install Manager
.
The SMART Install Manager installation wizard appears.
3. Follow the on-screen instructions.
g
To install SMART Install Manager from the website
1. Go to smarttech.com/administratordownloads .
2. Scroll to
SMART Notebook collaborative learning software
, click
Choose a version
, and then select
SMART Notebook software > 11 for Windows
.
3. Click
Download SMART Install Manager
, and then click
Download
.
4. Save the
Install Manager.exe
file to your computer.
5. Double-click the
Install Manager.exe
file.
The SMART Install Manager installation wizard appears.
6. Follow the on-screen instructions.
Using SMART Install Manager
After you install SMART Install Manager, shortcuts to the software appear on the desktop and in the
Start menu under
All Programs > SMART Technologies > SMART Install Manager
.
With SMART Install Manager, you can do the following: l
Open and customize an installation package.
l
Save your changes to the installation package as an XML file.
l
Publish your changes to the installation packages as an MST file.
Opening an installation package
To customize an installation package, drag its MSI file into the SMART Install Manager window.
Alternatively, you can search for installation packages on your computer by clicking , or on CDs or
DVDs by clicking .
8
C H A P T E R 2
Customizing installation packages
N O T E
All installation packages you’ve previously opened in SMART Install Manager appear in the
Unmodified Packages
tab.
After you open an installation package, a set of pages for that installation package appears in
SMART Install Manager. Customize the installation package using the controls on these pages.
Saving your changes
After you customize an installation package, save your changes as an XML file by selecting
File >
Save As
. When you next start SMART Install Manager, load the XML file by selecting
File > Open
, or by opening the MSI file and then selecting
File > Import
.
Publishing your changes as an MST file
The final step in using SMART Install Manager to customize an installation package is to publish your changes as an MST file. To do this, select
File > Publish
, and then use the dialog box to define a location for and create the MST file.
T I P
If you use an older MST file created with an earlier version of the MSI file, it might not work properly.
Use the current MSI file to create your MST file. Publish the MST file in the same location as the
MSI file.
9
C H A P T E R 2
Customizing installation packages
Customizing the installation package
To customize the installation package, open the
SMART Education Software 2012.msi
file in
SMART Install Manager (see
Opening an installation package
on page 8), and then set the controls
on each page.
Control Procedure
General Options: Product Selection
Activate software during installation
SMART Product Drivers
Select to activate the software automatically during installation rather than manually after installation.
Select to install
SMART Product Drivers.
Notes
You must include the product key properties for the software you’re installing for this property to work.
For mass activation information, see
Activating the software after installation
Installing
SMART Product Drivers also installs SMART Ink.
SMART Notebook software Select to install SMART Notebook software.
Product key Type your 22- or 25-character product key for SMART Notebook software.
SMART Response software
Product key
Select to install
SMART Response software.
If you’re installing
SMART Response software and students use
SMART Notebook SE (Student
Edition) software or
SMART Response VE Internetenabled devices to answer questions, type your 22- or 25character product key for
SMART Response software.
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
If you choose to install
SMART Response software, you must also install and activate
SMART Notebook software.
When you select this check box,
SMART Install Manager automatically selects
SMART Notebook
.
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
10
C H A P T E R 2
Customizing installation packages
Control
SMART Notebook Math
Tools
Product key
SMART Notebook 3D
Tools
Product key
SMART Sync Teacher software
Product key
SMART Classroom Suite software
Procedure
Select to install SMART Notebook
Math Tools software.
Notes
If you choose to install
SMART Notebook Math Tools software, you must also install and activate SMART Notebook software.
Type your 22- or 25-character product key for SMART Notebook
Math Tools software.
Select to install 3D Tools for
SMART Notebook software.
Type your 22- or 25-character product key for 3D Tools for
SMART Notebook software.
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
If you choose to install 3D Tools for SMART Notebook software, you must also install and activate
SMART Notebook software.
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
Select to install SMART Sync
Teacher software.
Type your 22- or 25-character product key for SMART Sync
Teacher software.
Select to install
SMART Classroom Suite Teacher software.
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
When you select this check box,
SMART Install Manager automatically selects
SMART Notebook
,
SMART Product Drivers
,
SMART Response
and
SMART Sync Teacher
. (These programs are part of
SMART Classroom Suite
Teacher software.)
11
C H A P T E R 2
Customizing installation packages
Control
Product key
Procedure
Type your 22- or 25-character product key for
SMART Classroom Suite Teacher software.
Notes
You can type the product key with or without hyphens.
When you type a volume product key, the software activates when you deploy it to your network computers.
General Options: Installation Options
Installation directory Type the path to your preferred folder for the software.
If you specify a folder, include a back slash (\) at the end of the path.
If you don’t specify a folder,
Windows Installer installs the software in
C:\Program files\
SMART Technologies\
Education Software
where
[Program files]
is
C:\Program
Files
for 32-bit versions of
Windows operating systems or
C:\Program Files (x86)
for 64-bit versions of Windows operating systems.
Ensure the folder path is valid.
SMART Install Manager doesn’t verify the folder path.
Install Start menu and desktop shortcuts
Select to create shortcuts in the
Start menu and on the desktop.
General Options: Language Selection
Select the language packs you want to install
Select the language packs you want to install.
Don’t select more than 20 language packs (see smarttech.com/kb/170081 ).
Some SMART software doesn’t support all listed languages.
SMART Sync software language support is managed separately.
General Options: SMART Product Update
Install SMART Product
Update in Full mode
Select to install
SMART Product Update (SPU) in
Full mode.
In Full mode, users can view the installed versions of SMART software as well as their product keys, and download and install updates.
12
C H A P T E R 2
Customizing installation packages
Control
Install SMART Product
Update in Dashboard mode
Procedure Notes
Select to install SPU in Dashboard mode.
In Dashboard mode, users can view only the installed versions of
SMART software and their product keys.
Select to not install SPU.
Do not install SMART
Product Update
Check for updates Type the number of days (1 to 60) between SPU checks.
Notify users about SMART product updates
Select to notify users of available
SMART product updates through the Windows notification area.
General Options: Customer Experience
Enable the Customer
Experience Program on all devices
Select to automatically enable the
Customer Experience Program for all users.
Disable the Customer
Experience Program on all devices
Select to automatically disable the
Customer Experience Program for all users.
SMART Notebook: Gallery Content
See
Installing and maintaining Gallery content
SMART Notebook: Team Content
Team Content path Type the path to the
Team Content
folder, which is a location on your school’s network where users can store shared content.
SMART Notebook: My Content
My Content path Type the path to the
My Content
folder, which is a location on the user’s computer where he or she can store individual content.
SMART Notebook: Optional Settings
Install print capture driver Select to include the Print Capture
Driver in the installation.
This option is available only if you install SPU in Full mode.
By default, SPU checks for product updates every 30 days.
This option is available only if you install SPU in Full mode.
For information on creating a
Team Content
folder, see
Creating or connecting to Team
You can include environment variables in the path.
The Print Capture Driver is a printer driver that enables users to export content from other programs to SMART Notebook software by using the
SMART Notebook Document
Writer.
13
C H A P T E R 2
Customizing installation packages
Control
Register
SMART Document Camera drivers
Procedure
Select to enable the registration of
SMART Document Camera™ drivers.
Notes
Disable the registration of
SMART Document Camera drivers if they conflict with the third-party drivers on the computer.
If you choose to install 3D Tools for SMART Notebook software,
SMART Install Manager selects this check box automatically.
You’re unable to clear it.
Install Notebook Plugin IE
Helper Object
Select to enable a plug-in that allows you to download .notebook
files from Internet Explorer Internet browser.
If you don’t enable the plug-in,
Internet Explorer Internet browser changes .notebook files’ extensions to .zip when downloading them. As a result, users are unable to open the files in SMART Notebook software.
If you have a security policy restricting the installation of any
Internet Explorer ActiveX plug-ins
(32-bit operating systems), don’t enable the plug-in or the installation might not succeed.
SMART Response: Activation Options
Registry file If you’re installing
SMART Response software in standard, LE, PE, XE or mixed modes, type the path to the activation registry file.
SMART Response: Setup Tool
Contact SMART Support for details.
SMART Response LE Select to enable students to answer questions with
SMART Response LE clickers.
SMART Response PE Select to enable students to answer questions with
SMART Response PE clickers.
14
C H A P T E R 2
Customizing installation packages
Control
SMART Response XE
Procedure
Select to enable students to answer questions with
SMART Response XE clickers.
Notes
SMART Response/Senteo Select to enable students to answer questions with
SMART Response or Senteo™ clickers.
SMART Response VE Select to enable students to answer questions with
SMART Response VE Internetenabled devices.
SMART Notebook SE Select to enable students to answer questions with
SMART Notebook SE software in
SMART Response CE mode.
Multiple SMART Response devices in the same class
Select to enable students to answer questions with Senteo,
SMART Response,
SMART Response LE,
SMART Response PE or
SMART Response XE clickers or
SMART Notebook SE software.
Select
Include
SMART Response VE
to also enable students to answer questions with SMART Response
VE Internet-enabled devices.
SMART Response: Optional Settings
Start Desktop Menu at log in for all users
Select to start SMART Response software when the user logs on.
15
C H A P T E R 2
Customizing installation packages
Control
Install the education standards database
File port
Secure Base port
Certificate file
Procedure
Select to install the
SMART Response education standards database.
Type the port number for the file data channel.
OR
Type
*
to use a random port number for the file data channel.
Type the port number for the encrypted data channel.
OR
Type
*
to use a random port number for the encrypted data channel.
Type the path to the certificate file for SSL digital certificate encryption.
OR
Click
Browse
and then browse to and select the certificate file.
SMART Sync Teacher: Administrator Setup
Administer class lists using a SMART School file
Select to administer class lists using a SMART School file, and then type the path to the SMART
School file in the
File location
box or click
Browse
, and then browse to and select the SMART School file.
Connect students using
SMART Sync Classlist
Server
Select to connect students using
SMART Sync Class List Server, and then type the host name or IP address for SMART Sync Class
List Server in the
Hostname or
IP address
box.
SMART Product Drivers: Optional Settings
Enable Tablet PC Support Select to use Tablet PC functionality with your SMART interactive display without having to connect a Tablet PC.
Notes
This control is applicable only if students answer questions with
SMART Notebook SE software.
The default port is 23458.
This control is applicable only if students answer questions with
SMART Notebook SE software.
The default port is 23457.
This control is applicable only if students answer questions with
SMART Notebook SE software.
Before you can specify the path to a SMART School file, you must install the SMART Sync
Administrator Tool, and then use it to create the SMART School file.
This property is applicable for the
Windows Vista and Windows 7 operating systems. It has no effect on other operating systems.
Start SMART Board Tools at logon
Select to start SMART Board
Tools when the user logs on.
16
C H A P T E R 2
Customizing installation packages
Control Procedure
Start SMART Ink at logon Select to start SMART Ink when the user logs on.
Make SMART Ink Viewer the default PDF viewer
Select to make SMART Ink
Viewer to the default PDF viewer.
Start SMART Vantage
Services at logon
Select to enable
SMART Vantage™ and SNMP
Agent services.
Register unsigned drivers Select to enable the registration of unsigned third-party drivers.
Notes
Enable these services if your school or district is using
SMART Vantage software.
If you enable the registration of unsigned third-party drivers, the installation process could ask users if they trust the makers of the drivers during installation.
This can cause issues if you deploy the installation in Silent mode. Therefore, it’s best to disable the registration of third-party drivers if you deploy the installation in Silent mode.
Using third-party tools
You can customize SMART software installation packages by creating MST files using a third-party tool, such as Orca database editor, and the Windows Installer properties (see
Windows Installer properties and parameters
17
Chapter 3:
19
Chapter 3
Deploying the software
Using the command line interface
Installing prerequisite third-party software
Installing the Education Software Installer 2012 SP1 patches
Using third-party imaging or remote management software
Activating the software after installation
You can deploy installation packages using the command line interface.
OR
You can deploy installation packages using third-party imaging or remote management software.
I M P O R T A N T
l
Close any Firefox browser windows before installing the Adobe Flash Player plug-in.
l
Regardless of how you deploy the software, you must choose to install at least one of the software products. Otherwise, the
SMART Education Software 2012.msi
file does not install any of the software products.
l
If you are deploying SMART Product Drivers, the user must restart (Windows XP operating systems) or log off and log back on (Windows Vista and Windows 7 operating systems) after you deploy the software to start the SMART Board Service. In addition, an error message might appear after you deploy the software stating that the
SMARTBoardService.exe
file could not be found. The user can close this error message.
l
If you want to install language packs, you must do so when you first deploy the software. If you want to install a language pack after you first deploy the software, you must do so using the language pack’s individual MSI file.
N O T E
You might need to manually activate the software after you deploy it.
C H A P T E R 3
Deploying the software
Using the command line interface
Using the command line interface, you can deploy installation packages in many ways, including running commands from the Command Prompt window and including commands in batch script files.
After deploying the installation packages, you need to install the Education Software Installer 2012
SP1 patches.
Installing prerequisite third-party software
g
To install the Microsoft .NET framework 4.0 client files
N O T E
SMART recommends that you follow the instructions on deploying the Microsoft .NET
framework in the
.NET framework deployment guide for administrators
on the MSDN website ( msdn.microsoft.com/en-us/library/ee390831.aspx
).
Run the following command to install the files in UI mode:
[Path]
\dotNetFx40_Client_x86_x64.exe /passive /showfinalerror
OR
Run the following command to install the files in silent mode:
[Path]
\dotNetFx40_Client_x86_x64.exe /q
Where
[Path]
is the path to the
dotNetFx40_Client_x86_x64.exe
file.
g
To install Microsoft Visual Studio Tools for Office for 32-bit computers
Run the following command:
[Path]
\vstor40_x86.exe /q
Where
[Path]
is the path to the
vstor40_x86.exe
file.
g
To install Microsoft Visual Studio Tools for Office for 64-bit computers
Run the following command:
[Path]
\vstor40_x64.exe /q
Where
[Path]
is the path to the
vstor40_x64.exe
file.
20
C H A P T E R 3
Deploying the software g
To install the Adobe Flash Player ActiveX control
Run the following command: msiexec /i "
[Path]
\install_flash_player_11_active_x.msi"
[Parameter]
Where o
[Path]
is the path to the
install_flash_player_11_active_x.msi
file.
o
[Parameter]
is the installation parameter (see
g
To install the Adobe Flash Player plug-in
Run the following command: msiexec /i "
[Path]
\install_flash_player_11_plugin.msi"
[Parameter]
Where o
[Path]
is the path to the
install_flash_player_11_plugin.msi
file.
o
[Parameter]
is the installation parameter (see
Installing SMART software
g
To install SMART software
Run the following command if you created an MST file to customize the installation package: msiexec /i "
[Path]
\SMART Education Software 2012.msi"
TRANSFORMS="
[MST file]
"
[Parameter]
OR
Run the following command if you didn’t create an MST file to customize the installation package: msiexec /i "
[Path]
\SMART Education Software 2012.msi"
[Properties] [Parameter]
21
C H A P T E R 3
Deploying the software
Where o
[Path]
is the path to the
SMART Education Software 2012.msi
file and MST file.
o
[MST file]
is the name of the MST file.
o
[Properties]
is a set of properties you can include to customize the installation (see
o
[Parameter]
is the installation parameter (see
Installing the Education Software Installer 2012 SP1 patches
After installing the software in the Education Software Installer 2012, you need to install the
Education Software Installer 2012 SP1 patches to upgrade the software to the latest service packs.
g
To install the SMART Common Files patch
Run the following command: msiexec /update "
[Path]
\CommonFiles_11_1_x_1.msp" /quiet
Where
[Path]
is the path to the
CommonFiles_11_1_x_1.msp
file.
g
To install the SMART Notebook software patch
Run the following command: msiexec /update "
[Path]
\notebook11_sp1.msp" /quiet
Where
[Path]
is the path to the
notebook11_sp1.msp
file.
g
To install the SMART Product Drivers patch
Run the following command: msiexec /update "
[Path]
\drivers11.0sp2patch.msp" /quiet
Where
[Path]
is the path to the
drivers11.0sp2patch.msp
file.
g
To install the SMART Ink patch
Run the following command: msiexec /update "
[Path]
\SMARTInk1.1.PATCH.msp" /quiet
Where
[Path]
is the path to the
SMARTInk1.1.PATCH.msp
file.
22
C H A P T E R 3
Deploying the software g
To install the SMART Response software patch
Run the following command: msiexec /update "
[Path]
\response_4.0_sp1.msp" /quiet
Where
[Path]
is the path to the
response_4.0_sp1.msp
file.
Using third-party imaging or remote management software
The following procedure shows how to deploy SMART software using Group Policy-based deployment software. For information on deploying SMART software using your organization’s third-party imaging or remote management software, see the software’s documentation.
N O T E S
l
This procedure may vary depending on your version of Windows operating system and your system preferences.
l
Ensure your domain controller has Windows Installer 4.5.
l
After deploying the software, you need to install the Education Software Installer 2012 SP1 patches (see
g
To deploy an installation package
1. Copy the MSI file and the MST file to
\\
[Domain Controller]
\NETLOGON
, where
[Domain Controller]
is your domain controller.
2. Open Control Panel, double-click
Administrative Tools
, and then double-click
Active
Directory Users and Computers
.
The
Active Directory Users and Computers
window appears.
3. Right-click your domain, and then select
Properties
.
The
Properties
dialog box appears.
4. Click the
Group Policy
tab, and then click
Edit
.
The
Group Policy Object Editor
dialog box appears.
5. Browse to
Computer Configuration\Software Settings
.
6. Right-click
Software Installation
, select
New > Package
, and then browse to and select the
MSI file from step 1.
7. In the
Deploy Software
section, click
Advanced
, and then click
OK
.
23
C H A P T E R 3
Deploying the software
8. Click the
Modifications
tab, click
Add
, and then browse to and select the MST file from step 1.
9. Click
OK
to apply the MST file to the MSI file.
10. Close all open windows and dialog boxes.
The next time each computer on the domain starts, the computer automatically installs the software in Silent mode with the customizations defined in the MST file.
Activating the software after installation
There are two situations in which the software doesn’t activate completely: l
Imaging a computer:
Activation is linked to the hardware identifier of the computer the software is installed and activated on. If you clone a hard drive image with installed and activated software, you must activate the software on each cloned computer.
l
Reverting a computer to an earlier state:
If you use system recovery or protection software that periodically restores the computer to an earlier state, you might need to activate the software before locking the computer so that the activation record is not cleared each time the computer is restored.
Run the activation wizard while connected to the network or complete the following procedure to activate the software on each computer.
g
To activate SMART software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid education_ bundle
--m=
[Value]
--v=3 --a
[Optional flags] [Product keys]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
24
C H A P T E R 3
Deploying the software o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag Purpose
-monitor=
[Number]
-proxy=
[Host:Port]
Specify the monitor to display the activation wizard.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Specify the proxy host and port number to use for activation.
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product keys]
are one or more software product keys you want to activate. Each product key must be in the following form:
--pk
[Product key]
Where
[Product key]
is the software product key.
g
To activate only SMART Classroom Suite software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid education_ bundle
--m=
[Value]
--v=3 --a
[Optional flags]
--pk
[Product key]
25
C H A P T E R 3
Deploying the software
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag Purpose
-monitor=
[Number]
-proxy=
[Host:Port]
Specify the monitor to display the activation wizard.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Specify the proxy host and port number to use for activation.
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
g
To activate only SMART Notebook software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid notebook_10a
--uipack notebook_10 --m=
[Value]
--v=3 --a
[Optional flags]
--pk
[Product key]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
26
C H A P T E R 3
Deploying the software o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag Purpose
-monitor=
[Number]
-proxy=
[Host:Port]
Specify the monitor to display the activation wizard.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Specify the proxy host and port number to use for activation.
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
g
To activate only SMART Notebook Math Tools software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid education_ bundle
--m=
[Value]
--v=3 --a
[Optional flags]
--pk
[Product key]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag
-monitor=
[Number]
-proxy=
[Host:Port]
Purpose
Specify the monitor to display the activation wizard.
Specify the proxy host and port number to use for activation.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
27
C H A P T E R 3
Deploying the software g
To activate only 3D Tools for SMART Notebook software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid education_ bundle
--m=
[Value]
--v=3 --a
[Optional flags]
--pk
[Product key]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag
-monitor=
[Number]
-proxy=
[Host:Port]
Purpose
Specify the monitor to display the activation wizard.
Specify the proxy host and port number to use for activation.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
g
To activate only SMART Response software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid response_3a
--uipack response_3 --m=
[Value]
--v=3 --a
[Optional flags]
--pk
[Product key]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
28
C H A P T E R 3
Deploying the software o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag Purpose
-monitor=
[Number]
-proxy=
[Host:Port]
Specify the monitor to display the activation wizard.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Specify the proxy host and port number to use for activation.
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
N O T E
This command is applicable only if you’re running SMART Response software in CE mode
(students answer questions with SMART Notebook SE software) or VE mode (students answer questions with Internet-enabled devices). Instructions for activating all other modes are included in the SMART Response documentation.
29
C H A P T E R 3
Deploying the software g
To activate only SMART Sync software after installation
Run the following command:
"C:\Program Files\Common Files\SMART Technologies\
SMART Product Update\activationwizard.exe" --puid sync_10
--uipack sync_10 --m=
[Value]
--v=1 --a
[Optional flags]
--pk
[Product key]
Where o
[Value]
is 4 to run the activation wizard in unattended mode.
OR
[Value]
is 6 to run the activation wizard in user interface mode.
o
[Optional flags]
are optional flags you can include to configure the activation wizard.
Flag
-monitor=
[Number]
-proxy=
[Host:Port]
Purpose
Specify the monitor to display the activation wizard.
Specify the proxy host and port number to use for activation.
-proxyuser=
[User]
Specify the proxy user name to use for activation.
-proxypassword=
[Password]
Specify the proxy password to use for activation.
-locale=
[Code]
Display the activation wizard user interface in a specific language, where
[Code]
is your language code (see
Installation language files and codes
o
[Product key]
is the software product key.
30
Chapter 4:
31
Chapter 4
Updating the software
Using a Windows Installer update installation package (MSI file)
Using a Windows Installer patch (MSP file)
SMART periodically releases updates to its software. These updates add new features and resolve issues.
Go to smarttech.com/software to download the latest installation package. SMART provides updates in two file formats in the installation package: l
Windows Installer update installation packages (MSI files) l
Windows Installer patches (MSP files)
N O T E S
l
MSP files are available only for select updates as identified on the SMART website.
l
For information on installing the Education Software Installer 2012 SP1 patches, see
Installing the Education Software Installer 2012 SP1 patches
Which file format you use depends on the version of the software installed on your computers and the version of the update. If these versions are the same, you can use the MSP file, if available, to install the update. If these versions are different (because, for example, a previous version of the software is installed on your computers), you must first upgrade the software on your computers to the same version as the update using the MSI file and then install the update using the MSP file, if available.
After you download an installation package and extract the update files, place the update files in a location on your network that’s accessible to all the computers you plan to update.
I M P O R T A N T
You cannot roll back an update after installing it on your computers. You must remove the full version of the software using Control Panel or the command line interface (see
on page 35), and then install the previous version of the software.
C H A P T E R 4
Updating the software
Using a Windows Installer update installation package (MSI file)
The command line for running an update using a Windows Installer update installation package varies depending on whether the update is major or minor.
N O T E
The SMART website indicates whether an update is major or minor.
g
To run a major software update using a Windows Installer update installation package
Run the following command: msiexec /i "
[Path]
\
[File]
.msi"
[Parameter]
Where o
[Path]
is the path to the MSI file.
o
[File]
is the name of the MSI file.
o
[Parameter]
is the installation parameter (see
I M P O R T A N T
Do not include the REINSTALLMODE and REINSTALL properties.
g
To run a minor software update using a Windows Installer update installation package
Run the following command: msiexec /i "
[Path]
\
[File]
.msi" REINSTALLMODE=vomus REINSTALL=ALL
[Parameter]
Where o
[Path]
is the path to the MSI file.
o
[File]
is the name of the MSI file.
o
[Parameter]
is the installation parameter (see
I M P O R T A N T
You must include the REINSTALLMODE=vomus and REINSTALL=ALL properties for a minor update to succeed.
32
C H A P T E R 4
Updating the software
Using a Windows Installer patch (MSP file)
g
To run a software update using a Windows Installer patch
I M P O R T A N T
o
You must include the REINSTALLMODE=omus property for a patch to succeed.
o
Do not include any other properties.
Run the following command: msiexec /p "
[Path]
\
[File]
.msp" REINSTALLMODE=omus /q
Where o
[Path]
is the path to the MSP file.
o
[File]
is the name of the MSP file.
33
Chapter 5:
Chapter 5
Removing the software
Using the command line interface
Using third-party imaging or remote management software
You can remove SMART software using the command line interface.
OR
You can remove SMART software using third-party imaging or remote management software.
Using the command line interface
Using the command line interface, you can remove SMART software in many ways, including running commands from the Command Prompt window and including commands in batch script files.
I M P O R T A N T
Only remove SMART Common Files after removing all other SMART software.
N O T E
You can remove the software using the individual installation packages (
SMART Notebook.msi
,
SMART Response Software.msi
, and so on) if you have the DVD.
g
To remove all software
Run the following command: msiexec /x "
[Path]
\SMART Education Software 2012.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Education Software 2012.msi
file.
o
[Parameter]
is the installation parameter (see
35
C H A P T E R 5
Removing the software g
To remove SMART Notebook software
If you installed SMART Notebook software using the
SMART Notebook.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Notebook.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Notebook.msi
file.
OR o
[Parameter]
is the installation parameter (see
Run the following command to remove the software using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Notebook software you’re removing, including the braces (“{” and “}”).
Version
10.0.124.0
10.0.126.0
10.0.132.0
10.0.187.1
10.1.253.1
10.0.517.2
10.0.596.3
10.0.631.3
10.6.94.0
10.6.140.1
10.7
10.8
11.x
Product code
{3E926B45-3748-40F9-8A30-99B225E1D2E5}
{F581DF68-CAE9-4064-A6CD-705D95D1C756}
{F581DF68-CAE9-4064-A6CD-705D95D1C756}
{F581DF68-CAE9-4064-A6CD-705D95D1C756}
{D836B93F-3030-4047-99D3-65304A25839A}
{A51CDA36-B81D-4934-9C9D-B649A0DBF4CD}
{5C98A4FE-1F42-4F02-B738-F32886AE5467}
{5C98A4FE-1F42-4F02-B738-F32886AE5467}
{0A0719F0-AD56-42BA-B68C-EFFC330B6F13}
{47E6A509-37B7-4440-A252-7031E9A898D7}
{9550F8A6-3D21-4544-8B87-F9FE7E01B964}
{ED0FF410-41B9-441F-B457-4AC81782E8BF}
{AFE024C7-7CA7-4C8E-90EE-D877C7CD96A3} o
[Parameter]
is the installation parameter (see
36
C H A P T E R 5
Removing the software g
To remove SMART Response software
If you installed SMART Response software using the
SMART Response Software.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Response Software.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Response Software.msi
file.
OR o
[Parameter]
is the installation parameter (see
Run the following command to remove the software using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Response software you’re removing, including the braces (“{” and “}”).
Version
2.0.97.0
2.1.307.0
2.2.591.1
2.5.39.0
3.0.159.0
3.0.256.1
3.5
4.0
Product code
{BDB1F637-C890-4B86-A5A7-D20D8DBE176B}
{CFD7DD74-42F9-4B50-AFCD-1E0B0F5ABBA4}
{7A63D2B1-DE99-4DB3-93E7-8FDEDD49E3E3}
{D04D1BAC-D63F-498F-B613-FB7BCF2F6C52}
{6FFCF813-06AF-468A-AD64-7F9B04DD0EDA}
{8B4CE9CA-ECB7-47D1-845E-E1167FFB3F1B}
{3ABF6865-E84E-4DAB-B730-0EB9E8F37EB1}
{02885557-ACA5-4B6F-85D2-3F1A9B8580F5} o
[Parameter]
is the installation parameter (see
g
To remove SMART Sync Teacher software
If you installed SMART Sync Teacher software using the
SMART Sync Teacher.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Sync Teacher.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Sync Teacher.msi
file.
o
[Parameter]
is the installation parameter (see
37
C H A P T E R 5
Removing the software
OR
Run the following command to remove the software using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Sync Teacher software you’re removing, including the braces (“{” and “}”).
Version
7.0.27.1
7.0.44.2
8.1.92.6
8.1.107.7
9.0.37.2.0
10.0
10.0 (chained)
Product code
{0BA04E3D-ACE5-4706-B252-2D126EC0FAAE}
{0BA04E3D-ACE5-4706-B252-2D126EC0FAAE}
{96E3501E-D006-4D78-8FD6-C6C00CD8919A}
{E721B9EF-DBCA-4356-892E-93B98A019F1B}
{72B08261-5E61-47A5-8C75-A8B8C4A44E7A}
{9D81615E-B150-488B-90CA-1159E2113BE3}
{F5F5DBE0-1238-477C-963C-BE6C305A1C5F} o
[Parameter]
is the installation parameter (see
g
To remove SMART Product Drivers
If you installed SMART Product Drivers using the
SMART Product Drivers Installer.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Product Drivers Installer.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Product Drivers Installer.msi
file.
OR o
[Parameter]
is the installation parameter (see
Run the following command to remove the software using the product code: msiexec /x
[Product code] [Parameter]
38
C H A P T E R 5
Removing the software
Where o
[Product code]
is the product code for the version of SMART Product Drivers you’re removing, including the braces (“{” and “}”).
Version
10.0.124.0
10.0.131.0
10.0.163.1
10.0.165.1
10.0.186.2
10.0.188.3
10.0.232.4
10.0.255.5
10.0.314.5
10.0.392.6
10.0.528.7
10.0.532.7
10.6.48.0
10.6.106.1
10.6.175.2
10.7.81.0
10.7 SP1
10.8
11.x
Product code
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{FF7A64AB-214A-47D1-95E7-742BCBA7F6C9}
{00C68967-9790-40DA-86F7-FDB248A5CDB1}
{AA9C1126-50DD-4993-9CDC-0BED8167293C}
{984EAE92-6043-451A-B786-9327FF165310}
{2623A1E3-478A-4F4A-A522-3A3D784A0C9C}
{487F1117-8BDE-4518-A798-015172AE0410}
{333B0B76-FC96-4C51-9AF6-B6EFA15ACE99}
{1355416A-967D-47C5-823D-D493C3E0B97C}
{4CE6C6E8-0DAD-4757-86ED-7FB4035BA98B}
{67E6410C-1E97-4D03-BEC2-8E83323A6BBD}
{E3189F44-F7BD-4F96-B756-A0AEFAF61D3A} o
[Parameter]
is the installation parameter (see
g
To remove SMART Ink
If you installed SMART Ink using the
SMART Product Drivers Installer.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Product Drivers Installer.msi"
[Parameter]
Where
OR o
[Path]
is the path to the
SMART Product Drivers Installer.msi
file.
o
[Parameter]
is the installation parameter (see
39
C H A P T E R 5
Removing the software
Run the following command to remove SMART Ink using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Ink you’re removing, including the braces (“{” and “}”).
Version
1.0
1.1
Product code
{4A1F2472-6164-43FA-9D2F-B35E71A8DF32}
{4A1F2472-6164-43FA-9D2F-B35E71A8DF32} o
[Parameter]
is the installation parameter (see
g
To remove SMART Common Files
If you installed SMART Common Files using the
SMART Common Files.msi
file, run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Common Files.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Common Files.msi
file.
OR o
[Parameter]
is the installation parameter (see
Run the following command to remove SMART Common Files using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Common Files you’re removing, including the braces (“{” and “}”).
Version
2011 (10.8)
2012 (11.x)
Product code
{0E5DD7A3-BE29-430C-970B-C553F4A58C39}
{ED2455F7-6AA6-4D3C-85E9-A72297DD7051} o
[Parameter]
is the installation parameter (see
40
C H A P T E R 5
Removing the software
Using third-party imaging or remote management software
N O T E
This procedure may vary depending on your version of Windows operating system and your system preferences.
g
To remove a deployed installation package
1. Open Control Panel, double-click
Administrative Tools
, and then double-click
Active
Directory Users and Computers
.
The
Active Directory Users and Computers
window appears.
2. Right-click your domain, and then select
Properties
.
The
Properties
dialog box appears.
3. Click the
Group Policy
tab, and then click
Edit
.
The
Group Policy Object Editor
dialog box appears.
4. Browse to
Computer Configuration\Software Settings\Software Installation
.
5. Right-click the software you want to remove, and then select
All Tasks > Remove
.
6. Select
Immediately uninstall the software from users and computers
, and then click
OK
.
The next time each computer on the domain starts, the computer automatically removes the software.
41
Appendix A:
43
Appendix A
Windows Installer properties and parameters
Properties
The following are properties for the installation package.
Property
General properties
Allowed values
TRANSFORMS [String]: A language MST file for the installation (see
Installation language files and codes
ACTIVATE_
LICENSE
1 (default): Register the product keys and automatically activate the software.
[Empty string]: Register the product keys but don’t automatically activate the software.
Notes
Ensure the specified MST file is in the same folder as the MSI file.
This property defines the language of the installer’s user interface and the installed software’s icons and shortcuts. It doesn’t define the installed software’s user interface language. The installed software uses the computer’s operating system language if it’s supported, or English
(U.S.) if not.
You can also use the TRANSFORMS property to apply an MST file created by SMART Install Manager (see
a third-party tool.
You must include the product key properties for the software you’re installing for this property to work.
For mass activation information, see
Activating the software after installation
A P P E N D I X A
Windows Installer properties and parameters
Property
INSTALL_
NOTEBOOK
NB_PROD_KEY
INSTALL_BOARD 1: Install SMART Product Drivers.
INSTALL_
RESPONSE
RESP_PROD_
KEY
ENABLE_MATH_
TRIAL
MATH_PROD_
KEY
ENABLE_MR_
TRIAL
MIXED_PROD_
KEY
Allowed values
1: Install SMART Notebook software.
[String]: The 22- or 25-character product key for SMART Notebook software you received from SMART.
[String]: The 22- or 25-character product key for SMART Notebook
Math Tools software you received from SMART.
1: Install 3D Tools for
SMART Notebook software.
[String]: The 22- or 25-character product key for 3D Tools for
SMART Notebook software you received from SMART.
INSTALL_SYNC 1: Install SMART Sync Teacher software.
Notes
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
Installing SMART Product Drivers also installs SMART Ink.
1: Install SMART Response software. If you include the INSTALL_
RESPONSE property, Windows
Installer installs SMART Notebook software even if you don’t include the
INSTALL_NOTEBOOK property.
[String]: The 22- or 25-character product key for SMART Response software you received from SMART if students use SMART Notebook SE software or SMART Response VE
Internet-enabled devices to answer questions.
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
1: Install SMART Notebook
Math Tools software.
If you include the ENABLE_MATH_
TRIAL property, Windows Installer installs SMART Notebook software even if you don’t include the
INSTALL_NOTEBOOK property.
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
If you include the ENABLE_MR_
TRIAL property, Windows Installer installs SMART Notebook software even if you don’t include the
INSTALL_NOTEBOOK property.
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
44
A P P E N D I X A
Windows Installer properties and parameters
Property
SYNC_PROD_
KEY
INSTALL_
CLASSSUITE
CLASS_PROD_
KEY
INSTALLDIR
DESKTOP_
ICONS
CUSTOMER_
LOGGING
Allowed values
[String]: The 22- or 25-character product key for SMART Sync Teacher software you received from SMART.
Notes
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
1: Install the SMART Classroom Suite
Teacher software components: l
SMART Notebook software l
SMART Product Drivers l
SMART Response software l
SMART Sync Teacher software
[Empty string]: Don’t install the
SMART Classroom Suite Teacher software components.
[String]: The 22- or 25-character product key for
SMART Classroom Suite software you received from SMART.
[String]: The path to your preferred folder for the software.
This property automatically appears in the
Product Key
box in the activation wizard if you choose not to include the
ACTIVATE_LICENSE property.
If you specify a folder, include a back slash (\) at the end of the path.
If you don’t specify a folder, Windows
Installer installs the software in
C:\Program files\
SMART Technologies\
Education Software
where
[Program files]
is
C:\Program Files
for 32-bit versions of Windows operating systems or
C:\Program Files (x86)
for 64-bit versions of Windows operating systems.
1 (default): Include shortcuts to the software on the desktop.
[Empty string]: Don’t include shortcuts to the software on the desktop.
0: Disable the Customer Experience
Program.
1 (default): Enable the Customer
Experience Program.
45
A P P E N D I X A
Windows Installer properties and parameters
Property
SPU properties
INSTALL_SPU
Allowed values
SPU_TIME_
FRAME
PRODUCT_
NOTIFICATION
Notes
1 (default): Install SPU in Full mode.
2: Install SPU in Dashboard mode.
0: Don’t install SPU.
[Integer]: The time in days (1 to 60) between SPU checks.
1 (default): Notify the user when updates are available from SPU.
0: Don’t notify the user when updates are available from SPU.
In Full mode, users can view the installed versions of SMART software as well as their product keys, and download and install updates.
In Dashboard mode, users can view only the installed versions of SMART software and their product keys.
By default, SPU checks for product updates every 30 days.
This property is applicable only if you install SPU.
This property is applicable only if you install SPU.
46
A P P E N D I X A
Windows Installer properties and parameters
Property Allowed values
SMART Notebook software properties
CONTENT_
TARGET_
PATH
CONTENT_
SOURCE_
PATH
NETWORK_
CONTENT
If you’re installing Gallery content on each user’s computer from the
SMART website (option 1): l
Set CONTENT_TARGET_
PATH to the path of the folder where you want to install the
Gallery content (if you don’t want to use the default folder).
If you’re installing Gallery content on each user’s computer from a folder on your school’s network (option 2): l l
Set CONTENT_SOURCE_
PATH to the path of the folder on your school’s network that contains the
Gallery
Essentials
and
Lesson
Activity Toolkit
folders.
Set CONTENT_TARGET_
PATH to the path of the folder where you want to install the
Gallery content (if you don’t want to use the default folder).
If you’re installing Gallery content in a central location (option 3): l
Set NETWORK_CONTENT to 1.
l
Set CONTENT_TARGET_
PATH to the path of the the folder on your school’s network that contains the
Gallery
Essentials
and
Lesson
Activity Toolkit
folders.
FULL_GALLERY 1: Install the full Gallery Essentials collection.
ADMIN_
CONTENT
1: Install the Administration and
Evaluation category.
ARTS_CONTENT 1: Install the Arts category.
Notes
For more information on the three options, see
If you select option 3, Windows
Installer ignores the FULL_GALLERY and *_CONTENT properties.
The default Gallery folder on Windows
7 and Windows Vista computers is
[All users profile folder]
\SMART
Technologies
.
The default Gallery folder on Windows
XP computers is
[All users profile folder]
\Application Data\SMART
Technologies
.
Don’t include this property if you included the FULL_GALLERY category.
Don’t include this property if you included the FULL_GALLERY category.
47
A P P E N D I X A
Windows Installer properties and parameters
Property
ENGLISH_
CONTENT
GEOGRAPHY_
CONTENT
HISTORY_
CONTENT
Allowed values
1: Install the English and Language
Arts category.
1: Install the Geography category.
1: Install the History category.
Notes
Don’t include this property if you included the FULL_GALLERY category.
Don’t include this property if you included the FULL_GALLERY category.
Don’t include this property if you included the FULL_GALLERY category.
MATH_CONTENT 1: Install the Mathematics category.
Don’t include this property if you included the FULL_GALLERY category.
PEOPLE_
CONTENT
1: Install the People and Culture category.
Don’t include this property if you included the FULL_GALLERY category.
SCIENCE_
CONTENT
1: Install the Science and Technology category.
Don’t include this property if you included the FULL_GALLERY category.
SPECIAL_
CONTENT
SPORTS_
CONTENT
1: Install the Special Needs category.
Don’t include this property if you included the FULL_GALLERY category.
1: Install the Sports and Recreation category.
Don’t include this property if you included the FULL_GALLERY category.
LAT_CONTENT 1: Install the Lesson Activity Toolkit collection.
TEAM_
CONTENT_
PATH
MY_CONTENT
[String]: Specify the path to the
Team Content
folder, which is a location on your school’s network where users can store shared content.
[String]: Specify the path to the
My Content
folder, which is a location on the user’s computer where he or she can store individual content.
For information on creating a
Team Content
folder, see
Creating or connecting to Team Content folders
You must specify a path to an existing folder in this property.
You can include environment variables in the path.
This property is useful if you want to store content in a shared network folder so users can access their
My Content
folder from any computer on the network.
48
A P P E N D I X A
Windows Installer properties and parameters
Property
PRINT_
CAPTURE
Allowed values
1 (default): Install the Print Capture
Driver.
[Empty string]: Don’t install the Print
Capture Driver.
INSTALL_
DOCCAM_
DRIVERS
1 (default): Enable the registration of
SMART Document Camera drivers.
[Empty string]: Disable the registration of
SMART Document Camera drivers.
SMART Response software properties
RESPONSE_
ACTIVATION
[String]: The path to the
SMART Response software registry file.
Notes
The Print Capture Driver is a printer driver that enables users to export content from other programs to
SMART Notebook software by using the SMART Notebook Document
Writer.
Disable the registration of
SMART Document Camera drivers if they conflict with existing third-party drivers on the computer.
Contact SMART Support for details.
This property is applicable only if students answer questions using
Senteo, SMART Response,
SMART Response LE,
SMART Response PE or
SMART Response XE clickers.
49
A P P E N D I X A
Windows Installer properties and parameters
Property
RESPONSE_
MODE
LOSU_RDM
Allowed values
1: Install the software in standard mode. (Students answer questions using Senteo or SMART Response clickers.)
2: Install the software in CE mode.
(Students answer questions using
SMART Notebook SE software.)
4: Install the software in LE mode.
(Students answer questions using
SMART Response LE clickers.)
8 (default): Install the software in PE mode. (Students answer questions using SMART Response PE clickers.)
16: Install the software in XE mode.
(Students answer questions using
SMART Response XE clickers.)
32: Install the software in VE mode.
(Students answer questions using
SMART Response VE Internetenabled devices.)
64: Install the software in Mixed mode. (Students answer questions using Senteo, SMART Response,
SMART Response LE,
SMART Response PE or
SMART Response XE clickers or
SMART Notebook SE software.)
128: Install the software in Mixed mode with additional support for
SMART Response VE Internetenabled devices.
1 (default): Add the
SMART Response icon to the notification area when the user logs on.
[Empty string]: Don’t add the
SMART Response icon to the notification area when the user logs on.
Notes
You or the user can change the mode after installation using the
SMART Response Setup Tool.
50
A P P E N D I X A
Windows Installer properties and parameters
Property
LOSU_RHWS
INSTALL_
DATABASE
FILE_PORT
SECURE_BASE_
PORT
CERTIFICATE_
FOLDER
Allowed values
1 (default): Start the
SMART Response hardware service when the user logs on.
[Empty string]: Don’t start the
SMART Response hardware service when the user logs on.
1 (default): Install the
SMART Response education standards database.
[Empty string]: Don’t install the
SMART Response education standards database.
[String]: The port you want to use to receive assessment information from
SMART Notebook SE software.
[String]: The secure port you want to use to receive assessment information from
SMART Notebook SE software.
[String]: The path to and file name of the security certificate for Diffie-
Hellman encryption.
SMART Sync software properties
ENABLE_
ADMINISTERED_
CLASSLIST
1: Administer class lists using a
SMART School file.
[Empty string] (default): Don’t administer class lists using a SMART
School file.
Notes
This property is applicable only if you’re installing SMART Response software in CE mode.
This property is applicable only if you’re installing SMART Response software in CE mode.
This property is applicable only if you’re installing SMART Response software in CE mode.
If you want to administer class lists using a SMART School file, you must install SMART Sync Administrator
Tool, use it to create the file, and then specify the path to the file using the
SCHOOLFILE property.
For information on SMART Sync
Administrator Tool, see the
SMART Sync 2011 system administrator’s guide
( smarttech.com/kb/160490 ).
SCHOOLFILE [String]: The path to the SMART
School file.
51
A P P E N D I X A
Windows Installer properties and parameters
Property
ENABLE_
CONNECT_
STUDENTS_
USING_CLS
Allowed values
1: Connect students using
SMART Sync Class List Server.
0 (default): Don’t connect students using SMART Sync Class List
Server.
Notes
If you want to connect students using
SMART Sync Class List Server, you must install SMART Sync Class List
Server, and then specify the host name or IP address in the SYNC_
NAMINGSERVERLOC property.
For information on SMART Sync
Class List Server, see the
SMART Sync 2011 system administrator’s guide
( smarttech.com/kb/160490 ).
SYNC_NAMING
SERVERLOC
[String]: The host name or IP address of SMART Sync Class List Server.
SMART Product Drivers properties
ENABLE_
STPCS
LOSU_
BRDTOOLS
1 (default): Use Tablet PC functionality with the SMART Board interactive whiteboard without connecting a Tablet PC.
[Empty string]: Don’t use Tablet PC functionality with the SMART Board interactive whiteboard without connecting a Tablet PC.
1 (default): Start SMART Board Tools when the user logs on.
[Empty string]: Don’t start
SMART Board Tools when the user logs on.
LOSU_INK 1 (default): Start SMART Ink when the user logs on.
[Empty string]: Don’t start SMART Ink when the user logs on.
DEFAULT_PDF 1: Set SMART Ink Viewer as the default PDF viewer.
[Empty string] (default): Don’t set
SMART Ink Viewer as the default
PDF viewer.
This property is applicable for the
Windows Vista and Windows 7 operating systems. It has no effect on other operating systems.
If you specify [Null], users don’t have touch support at the Windows logon screen.
52
A P P E N D I X A
Windows Installer properties and parameters
Property Allowed values
LOSU_VANTAGE [Empty string] (default): Don’t enable the SMART Vantage and SNMP services.
1: Enable the SMART Vantage and
SNMP services and, if you’re installing the software in UI mode, start the service after the installation is complete.
START_
SNMP_SERVICE
1: Enable SMART SNMP Agent, allowing you to remotely monitor and control your SMART products and projectors from a central location.
[Empty string] (default): Disable
SMART SNMP Agent.
Notes
Alternatively, you can use the
START_VANTAGE_SERVICE and
START_SNMP_SERVICE properties.
Enable these services if your school or district is using SMART Vantage software.
INSTALL_
UNSIGNED_
DRIVERS
1: Enable the registration of
SMART Document Camera and unsigned third-party drivers.
0 (default): Disable the registration of
SMART Document Camera and unsigned third-party drivers.
Language pack properties
Don’t select more than 20 language packs (see smarttech.com/kb/170081 ).
SQ 1: Install the Albanian language pack.
If you enable the registration of unsigned third-party drivers, the installation process could ask users if they trust the makers of the drivers during installation. This can cause issues if you deploy the installation in
Silent mode. Therefore, it’s best to disable the registration of third-party drivers if you deploy the installation in
Silent mode.
AR
EU
CA
ZH_CN
ZH_TW
1: Install the Arabic language pack.
1: Install the Basque language pack.
1: Install the Catalan language pack.
1: Install the Chinese (Simplified) language pack.
1: Install the Chinese (Traditional) language pack.
HR
CS
DA
NL
EN_GB
ET
1: Install the Croatian language pack.
1: Install the Czech language pack.
1: Install the Danish language pack.
1: Install the Dutch language pack.
1: Install the English (UK) language pack.
1: Install the Estonian language pack.
53
Property
FI
FR
GA
GD
KK
KO
LV
LT
IS
IT
JA
KN_IN
GL
DE
EL
GU_IN
HE
HI_IN
HU
MK
MS
MI_IN
MI
MR_IN
NB
PL
PT_PT
PT_BR
A P P E N D I X A
Windows Installer properties and parameters
Allowed values
1: Install the Finnish language pack.
1: Install the French language pack.
1: Install the Gaelic (Ireland) language pack.
1: Install the Gaelic (Scotland) language pack.
1: Install the Galician language pack.
1: Install the German language pack.
1: Install the Greek language pack.
1: Install the Gujarati language pack.
1: Install the Hebrew language pack.
1: Install the Hindi language pack.
1: Install the Hungarian language pack.
1: Install the Icelandic language pack.
1: Install the Italian language pack.
1: Install the Japanese language pack.
1: Install the Kannada language pack.
1: Install the Kazakh language pack.
1: Install the Korean language pack.
1: Install the Latvian language pack.
1: Install the Lithuanian language pack.
1: Install the Macedonian language pack.
1: Install the Malay language pack.
1: Install the Malayalam language pack.
1: Install the Maori language pack.
1: Install the Marathi language pack.
1: Install the Norwegian language pack.
1: Install the Polish language pack.
1: Install the Portuguese (Portugal) language pack.
1: Install the Portuguese (Brazil) language pack.
Notes
54
A P P E N D I X A
Windows Installer properties and parameters
RU
SR
SK
SL
Property
RO
ES
ES_MX
Allowed values
1: Install the Romanian language pack.
1: Install the Russian language pack.
1: Install the Serbian language pack.
1: Install the Slovak language pack.
1: Install the Slovenian language pack.
1: Install the Spanish (Spain) language pack.
1: Install the Spanish (Mexico) language pack.
1: Install the Swahili language pack.
1: Install the Swedish language pack.
Notes
SW
SV
TA_IN
TE_IN
TR
UK
VA
1: Install the Tamil language pack.
1: Install the Telugu language pack.
1: Install the Turkish language pack.
1: Install the Ukrainian language pack.
1: Install the Valencian language pack.
CY 1: Install the Welsh language pack.
Internet access properties
ACC [Integer]: Enable Internet access for specified components.
l
0: No components l
1: Gallery Setup l
2: Language Setup l l l l
3: Gallery Setup and Language
Setup
13: All components except
Language Setup
14: All components except
Gallery Setup
15 (default): All components
55
A P P E N D I X A
Windows Installer properties and parameters
Parameters
The following are the standard Windows Installer parameters for the msiexec command.
Parameter
/q
/qb
/qb!
/qb+
/qb+!
/qr
/qf
/qn
/qn+
Use
Hide the installation wizard.
N O T E
This is Silent mode.
Show a basic installation wizard.
Show a basic installation wizard without a
Cancel
button.
Show a basic installation wizard with a dialog box signaling the end of the installation.
Show a basic installation wizard without a
Cancel
button but with a dialog box signaling the end of the installation.
Show a reduced installation wizard.
Show the full installation wizard, including a dialog box signaling the end of the installation or the
Fatal Error
,
User Exit
or
Exit
dialog box.
Hide the installation wizard and the dialog box signaling the end of the installation.
Hide the installation wizard but show the dialog box signaling the end of the installation.
Examples
The following example installs SMART Notebook software and SMART Product Drivers in Silent mode: msiexec /i "
[Path]
\SMART Education Software.msi" INSTALL_NOTEBOOK=1
INSTALL_BOARD=1 /q
The following example installs SMART Notebook software in Silent mode, providing a product key and automatically activating the software upon completion of the installation: msiexec /i "
[Path]
\SMART Education Software.msi" INSTALL_NOTEBOOK=1
NB_PROD_KEY=
[22- or 25-character product key]
ACTIVATE_LICENSE=1 /q
The following example installs SMART Notebook software in Silent mode, linking to centrally located
Gallery content: msiexec /i "
[Path]
\SMART Education Software.msi" INSTALL_NOTEBOOK=1
NETWORK_CONTENT=1 CONTENT_TARGET_PATH="\\SchoolServer\Gallery" /q
56
A P P E N D I X A
Windows Installer properties and parameters
The following example installs SMART Response software in CE mode in Silent mode: msiexec /i "
[Path]
\SMART Education Software.msi" INSTALL_RESPONSE=1
RESPONSE_MODE=2 /q
The following example installs SMART Sync software in Silent mode, specifying the location of the
SMART School file: msiexec /i "
[Path]
\SMART Education Software.msi" INSTALL_SYNC=1
SCHOOLFILE="\\SchoolServer\SchoolFile\SchoolFile.school" /q
57
Appendix B:
59
Appendix B
Language files and codes
Installation language files and codes
Installation language files and codes
Language
English (U.S.)
English (UK)
Arabic
Basque
Catalan
Chinese (Simplified)
Chinese (Traditional)
Croatian
Czech
Danish
Dutch
Finnish
French (France)
French (Canada)
German
Greek
Hebrew
Hungarian
Italian
Japanese
Korean
Norwegian
Polish
1038
1040
1041
1042
1044
1045
1030
1043
1035
1036
3084
1031
1032
1037
Code
1033
2057
1025
1069
1027
2052
1028
1050
1029
1030.mst
1043.mst
1035.mst
1036.mst
3084.mst
1031.mst
1032.mst
1037.mst
1038.mst
1040.mst
1041.mst
1042.mst
1044.mst
1045.mst
File
1033.mst
2057.mst
1025.mst
1069.mst
1027.mst
2052.mst
1028.mst
1050.mst
1029.mst
A P P E N D I X B
Language files and codes
Language
Portuguese (Portugal)
Portuguese (Brazil)
Romanian
Russian
Serbian
Slovak
Slovenian
Spanish (Spain)
Spanish (Mexico)
Swedish
Turkish
Code
2070
1046
1048
1049
3098
1051
1060
1034
2058
1053
1055
File
2070.mst
1046.mst
1048.mst
1049.mst
3098.mst
1051.mst
1060.mst
1034.mst
2058.mst
1053.mst
1055.mst
Language packs
File albanian_language_pack.msi
arabic_language_pack.msi
basque_language_pack.msi
bengali_language_pack.msi
catalan_language_pack.msi
chinese_(simplified)_language_ pack.msi
chinese_(traditional)_language_ pack.msi
croatian_language_pack.msi
czech_language_pack.msi
danish_language_pack.msi
dutch_language_pack.msi
english_(united_kingdom)_language_ pack.msi
estonian_language_pack.msi
finnish_language_pack.msi
french_language_pack.msi
gaelic_(ireland)_language_pack.msi
gaelic_(scotland)_language_pack.msi
galician_language_pack.msi
Code
{DCE79A79-D05E-45E4-B473-0E43A82A4958}
{9F6226AA-088E-453F-8A0C-1EC0F3E53876}
{66026B64-FB7E-4AF3-886C-22CA4C9303BF}
{E7B5044D-927A-4338-8CD2-4F67BB36B26F}
{27E2441F-9F1F-4126-996F-CE953D9924BB}
{0507C320-0AAC-48C5-A9E2-5EF1939EDF56}
{7ECCD035-2DA2-42B1-BE34-C71044C5CE8F}
{139CE9AD-B37F-4A8D-96B9-82836CADAD7D}
{D4D68022-BE82-4C7B-87D5-2460A9BDB001}
{1EAB215B-E60D-4734-81C6-20D2A7A3B5A3}
{9B2B8676-0C52-4F97-9869-3E0CC87C85E0}
{AD53E305-0F31-426E-85D1-35C63D913639}
{DBBA7E9F-5C67-4495-9CF3-0B4C7F47ECE9}
{D31510A9-657B-4B88-8BFA-16218345D3BE}
{015BE11B-72BE-44C4-99BA-36CA831757E4}
{F9B00A43-6B90-4485-BA35-C31E744DF036}
{6ADECEE0-1A97-4223-92BC-76BBD2E91424}
{69D5E617-C1C0-43CD-AE1D-D5D625A941BA}
60
A P P E N D I X B
Language files and codes
File german_language_pack.msi
greek_language_pack.msi
gujarati_language_pack.msi
hebrew_language_pack.msi
hindi_language_pack.msi
hungarian_language_pack.msi
icelandic_language_pack.msi
italian_language_pack.msi
japanese_language_pack.msi
kannada_language_pack.msi
kazakh_language_pack.msi
korean_language_pack.msi
latvian_language_pack.msi
lithuanian_language_pack.msi
macedonian_language_pack.msi
malayalam_language_pack.msi
malaysian_language_pack.msi
maori_language_pack.msi
{1BD9BC37-580E-4AC4-ABE1-088E4F95800B}
{B2AA7B7B-DBFE-4B9C-845B-41A9A8607D93}
{0078E046-7BED-4EDF-ADFE-45CF884CB5BA}
{611B5F17-BABE-43BE-A436-4989E005706A}
{D1912344-2EF0-4940-BD1C-D70DE2CA1690}
{EB212790-F42D-491C-B658-E36C7130167C}
{902F0C70-0C0C-472D-A556-CBF42EC9AB0F}
{C803F88D-EAB2-4CE1-8AC6-4986AE3037E5}
marathi_language_pack.msi
norwegian_language_pack.msi
polish_language_pack.msi
{C7D8B229-0BD6-4350-BF79-259E3609F96C}
{E5B6189B-2FEE-4B0F-98DE-F86F04975528}
{B009E70F-71B7-43EA-A4A2-EED4D65751AB}
portuguese_(portugal)_language_ pack.msi
{F9914964-383B-4B92-ADEC-6A5608566219}
portuguese_(brazil)_language_pack.msi
{97A542D0-3E82-4F73-A594-7E284559C66F}
romanian_language_pack.msi
russian_language_pack.msi
serbian_language_pack.msi
slovak_language_pack.msi
slovenian_language_pack.msi
spanish_language_pack.msi
spanish_(international_latin_american)_ language_pack.msi
swahili_language_pack.msi
swedish_language_pack.msi
tamil_language_pack.msi
telugu_language_pack.msi
Code
{5C3C89CB-A719-46C5-80C7-2E2237AD3692}
{BCC482A0-4667-4D8A-A010-490F05F5BD2D}
{60880B5B-AD27-4A85-B84D-39970194E02D}
{CEE72F7E-A775-4A9B-9F9F-9F197FDBC5CA}
{2CC18069-C248-4AEB-AB9D-FCE39BDDB4AE}
{452B064F-DBD5-4A79-85AB-CEEF2F2D54C8}
{0E96E801-76A4-4830-B3C2-E6666526F702}
{DB9D6AF8-FC14-43B2-B3CE-5A6C8C89CF44}
{649C11F3-9B7D-423C-BB0F-AD5F985DE03A}
{8DB49BC1-D17F-4607-BE3C-03B3ECA157E7}
{2E200EE3-41B5-4600-889D-5AE9D18D4739}
{6BDED2D7-9987-49B1-81B8-6EB2B38B559A}
{CEB2A81D-EC54-4BCD-9B51-F89CD5B6501B}
{8957DF90-DFFD-4EB7-90B0-88FED799B82C}
{23530579-1E05-4581-BFA7-5B3A94E11928}
{29ADE094-DA64-46EC-835C-1DEC4A035614}
{F7C06E3B-9BC3-411C-867E-53CAE223DB13}
{BE1B26E6-2BDF-4D75-8C13-779DB0E3DD7A}
{640A01FF-E76A-458B-A630-EE8BCDBF4649}
{A015689E-13BC-4F91-9E74-E242508DB63D}
{2D5485F9-841F-4B65-99B6-BD372C0275DB}
61
A P P E N D I X B
Language files and codes
File turkish_language_pack.msi
ukrainian_language_pack.msi
urdu_language_pack.msi
valencian_language_pack.msi
welsh_language_pack.msi
Code
{C1F6AEE2-93BE-408B-8941-856A8B69E1B7}
{E6A6D3E5-B167-4F9C-BAFF-1B48DA490969}
{C771107E-53B7-42AE-94E4-CC0CD2E11AAF}
{523CA98D-E3EB-46A9-A2AF-36C90679C397}
{39CBF505-6D5E-4FB1-AB83-E6954019817B}
62
Appendix C:
63
Appendix C
Installing and maintaining
Gallery content
Installing Gallery content on each computer from the SMART website
Configuring Gallery content using the command line interface
Configuring Gallery content using SMART Install Manager
Installing Gallery content on each computer from a folder on your school’s network
Configuring Gallery content using the command line interface
Configuring Gallery content using SMART Install Manager
Installing Gallery content in a central location
Configuring Gallery content using the command line interface
Configuring Gallery content using SMART Install Manager
Downloading a Gallery collection
Downloading certain categories of a Gallery collection
Installing a Gallery collection
Installing certain categories of a Gallery collection
Registering installed Gallery collections
Changing Gallery content locations
Starting the software in Administration mode
Changing the location of the My Content folder
Creating or connecting to Team Content folders
A P P E N D I X C
Installing and maintaining Gallery content
Gallery content includes the following: l
Gallery Essentials, which is a collection of educational photos and other images, audio files, and Adobe Flash Player compatible files.
l
Lesson Activity Toolkit, which contains objects teachers can use to create their own lesson activities.
You can access Gallery content from the
Gallery
tab in SMART Notebook software.
Installing Gallery content
There are three options for installing Gallery content.
Option
1
2
3
Description
Install Gallery content on each user’s computer from the SMART website.
Install Gallery content on each user’s computer from a folder on your school’s network.
Install Gallery content in a central location, and then configure the software to refer to that location.
T I P
Option 3 is ideal for environments where hard disk space on computers is limited.
Installing Gallery content on each computer from the SMART website
Configuring Gallery content using the command line interface
If you’re customizing the software using the command line interface, include the CONTENT_
TARGET_PATH property in the installation package customization. You can also include the FULL_
GALLERY and *_CONTENT properties to define the Gallery content you want to install. For more information on these properties, see
Windows Installer properties and parameters
Configuring Gallery content using SMART Install Manager
If you’re customizing the software using SMART Install Manager, complete the procedure in this section to configure Gallery content.
g
To configure Gallery content using SMART Install Manager
1. Open the software installation package in SMART Install Manager.
2. Click
Product Selection
.
The
Product Selection
page appears.
64
A P P E N D I X C
Installing and maintaining Gallery content
3. Select
SMART Notebook
(and any other products you want to install).
4. Click
Gallery Content
.
The
Gallery Content
page appears.
5. Click
Install the Gallery on each computer
.
6. In the
Destination location
box, type the path of the location on each computer where you want to install the Gallery collections (if you don’t want to use the default folder).
7. Select the Gallery collections you want to install.
8. Publish your changes as an MST file, and then deploy the MSI and MST files.
Installing Gallery content on each computer from a folder on your school’s network
Downloading Gallery content
Download Gallery content from the DVD or the Internet to a folder on your school’s network following the procedures in this section, and then install the content on each computer from this folder.
N O T E
To download Gallery content from the DVD, you must have Gallery Setup on your computer.
Gallery Setup is included with SMART Install Manager, SMART Notebook software and
SMART Notebook SE software.
g
To download Gallery content from the DVD
1. Insert the DVD in your computer’s DVD drive.
2. If the DVD browser appears, close it.
3. In Windows Explorer, browse to
[DVD drive]
\Content\Gallery Essentials
.
4. Double-click
SMARTEssentials.gallerycollection
.
Gallery Setup starts.
5. In the
Content
tab, select the categories you want to include and clear the categories you don’t want to include.
6. In the
Languages
tab, select the language packs you want to include and clear the language packs you don’t want to include.
T I P
To see the language pack names in English, clear
Show native names
.
65
A P P E N D I X C
Installing and maintaining Gallery content
7. In the
Installation folder for Gallery content
box, type the path to the folder where you want to store the Gallery collection.
8. Click
OK
.
Gallery Setup installs the selected Gallery collection.
9. Click
Finish
.
10. Repeat steps 3 to 9 for the Lesson Activity Toolkit (
[DVD drive]
\Content\Lesson Activity
Toolkit\Lesson Activity Toolkit.gallerycollection
).
g
To download Gallery content from the Internet
1. Open the DVD software installation package in SMART Install Manager.
2. Click
Product Selection
.
The
Product Selection
page appears.
3. Select
SMART Notebook
.
4. Click
Gallery Content
.
The
Gallery Content
page appears.
5. Click
Install the Gallery on each computer
.
6. Click
Download
, and then select the location to download the Gallery content to.
7. Click
OK
to start the download.
8. Click
Close
when the download is complete.
Configuring Gallery content using the command line interface
If you’re customizing the software using the command line interface, include the CONTENT_
SOURCE_PATH and CONTENT_TARGET_PATH properties in the installation package customization. You can also include the FULL_GALLERY and *_CONTENT properties to define the
Gallery content you want to install. For more information on these properties, see
Windows Installer properties and parameters
Configuring Gallery content using SMART Install Manager
If you’re customizing the software using SMART Install Manager, complete the procedure in this section to configure Gallery content.
66
A P P E N D I X C
Installing and maintaining Gallery content g
To configure Gallery content using SMART Install Manager
1. Open the software installation package in SMART Install Manager.
2. Click
Product Selection
.
The
Product Selection
page appears.
3. Select
SMART Notebook
(and any other products you want to install).
4. Click
Gallery Content
.
The
Gallery Content
page appears.
5. Click
Install the Gallery on each computer
.
6. In the
Source location
box, type the path to the folder on your school’s network that contains the Gallery content (if you downloaded Gallery collections to your school’s network).
7. In the
Destination location
box, type the path of the location on each computer where you want to install the Gallery collections (if you don’t want to use the default folder).
8. Clear the Gallery collections you don’t want to install.
9. Publish your changes as an MST file, and then deploy the MSI and MST files.
Installing Gallery content in a central location
Downloading Gallery content
To place and use Gallery content in a central location on your school’s network, you must first download the content from the DVD or the Internet to that location by performing one of the procedures in this section.
N O T E
To download Gallery content from the DVD, you must have Gallery Setup on your computer.
Gallery Setup is included with SMART Install Manager, SMART Notebook software and
SMART Notebook SE software.
g
To download Gallery content from the DVD
1. Insert the DVD in your computer’s DVD drive.
2. If the DVD browser appears, close it.
3. In Windows Explorer, browse to
[DVD drive]
\Content\Gallery Essentials
.
4. Double-click
SMARTEssentials.gallerycollection
.
Gallery Setup starts.
67
A P P E N D I X C
Installing and maintaining Gallery content
5. In the
Content
tab, select the categories you want to include and clear the categories you don’t want to include.
6. In the
Languages
tab, select the language packs you want to include and clear the language packs you don’t want to include.
T I P
To see the language pack names in English, clear
Show native names
.
7. In the
Installation folder for Gallery content
box, type the path to the folder where you want to store the Gallery collection.
8. Click
OK
.
Gallery Setup installs the selected Gallery collection.
9. Click
Finish
.
10. Repeat steps 3 to 9 for the Lesson Activity Toolkit (
[DVD drive]
\Content\Lesson Activity
Toolkit\Lesson Activity Toolkit.gallerycollection
).
g
To download Gallery content from the Internet
1. Open the DVD software installation package in SMART Install Manager.
2. Click
Product Selection
.
The
Product Selection
page appears.
3. Select
SMART Notebook
.
4. Click
Gallery Content
.
The
Gallery Content
page appears.
5. Click
Share Gallery content with all computers from a common network location
.
6. If you want to download the Gallery Essentials collection, click
Install
beside
Essentials for Educators
, and then follow the on-screen instructions.
7. If you want to download the Lesson Activity Toolkit collection, click
Install
beside
Lesson Activity Toolkit
, and then follow the on-screen instructions.
Configuring Gallery content using the command line interface
If you’re customizing the software using the command line interface, include the NETWORK_
CONTENT and CONTENT_TARGET_PATH properties in the installation package customization.
For more information on these properties, see
Windows Installer properties and parameters
68
A P P E N D I X C
Installing and maintaining Gallery content
Configuring Gallery content using SMART Install Manager
If you’re installing the software using SMART Install Manager, complete the procedure in this section to configure Gallery content.
g
To configure Gallery content using SMART Install Manager
1. Open the software installation package in SMART Install Manager.
2. Click
Product Selection
.
The
Product Selection
page appears.
3. Select
SMART Notebook
(and any other products you want to install).
4. Click
Gallery Content
.
The
Gallery Content
page appears.
5. Click
Share Gallery content with all computers from a common network location
.
6. In the
Gallery location
box, type the path to the folder on your school’s network that contains the Gallery content.
7. Publish your changes as an MST file, and then deploy the MSI and MST files.
Modifying Gallery content
After installing the software, you can modify Gallery content using Gallery Setup. This program is available under
[Programs folder]
\Common Files\SMART Technologies\SMART Product
Update
and you can run it from a graphical user interface or the command line.
g
To run Gallery Setup from a graphical user interface
1. In Windows Explorer, browse to
[Programs folder]
\Common
Files\SMART Technologies\SMART Product Update
.
2. Double-click
Gallery Setup.exe
.
The
Select a Gallery
dialog box appears.
3. Select the Gallery collection you want to modify, and then click
OK
.
Gallery Setup starts.
4. In the
Content
tab, select the categories you want to include and clear the categories you don’t want to include.
69
A P P E N D I X C
Installing and maintaining Gallery content
5. In the
Languages
tab, select the language packs you want to include and clear the language packs you don’t want to include.
T I P
To see the language pack names in English, clear the
Show native names
check box.
6. In the
Installation folder for Gallery content
box, type the path to the folder where you want to store the Gallery collection.
7. Click
OK
.
Gallery Setup updates the selected Gallery collection.
8. Click
Finish
.
g
To run Gallery Setup from the command line
1. Open a Command Prompt window.
2. Type the following command:
"
[Path]
\Gallery Setup.exe"
[Command] [Flags] [Parameters]
Where: o
[Path]
is the path to the
Gallery Setup.exe
file.
N O T E
The default path is
[Programs folder]
\Common
Files\SMART Technologies\SMART Product Update
.
o
[Command]
is a command (see
o
[Flags]
is one or more optional flags for the command (see
o
[Parameters]
is one or more parameters for the command (see
N O T E S
o
For example commands, see
o
Gallery Setup doesn’t support Windows Installer options.
3. Press ENTER.
Gallery Setup updates the selected Gallery collection.
70
A P P E N D I X C
Installing and maintaining Gallery content
Commands
The following table defines available commands for Gallery Setup.
Command
-downloadall
-downloadsome
-installall
-installsome
-teamcontent
-mycontent
-repair
-uninstall
-register
Purpose
Download the entire Gallery collection to a source folder.
Notes
Download specific categories of the
Gallery collection to a source folder.
Install the entire Gallery collection from the source folder to the destination folder.
Install specific categories of the
Gallery collection from the source folder to the destination folder.
Set the default My Content path to the folder specified by the
-destination
parameter.
Attempt to detect and optionally remove corrupted galleries.
If you omit the
-source
parameter,
Gallery Setup doesn’t use a default path unless you provide the
-allowdownload
flag.
If you omit the
-destination
parameter, Gallery Setup uses the default path defined in the Gallery collection’s configuration.
Specify which categories you want to download using the
-c
parameter.
Register additional Team Content at the folder specified by the
-destination
parameter.
You must enter an existing Gallery destination.
Include the galleries.
-allowcleanup
parameter to delete corrupted
Remove the installed Gallery collection.
Specify which categories you want to download using the
-c
parameter.
If you omit the
-source
parameter,
Gallery Setup doesn’t use a default path unless you provide the
-allowdownload
flag.
If you omit the
-destination
parameter, Gallery Setup uses the default path defined in the Gallery collection’s configuration.
Define the location of Gallery content.
Use this command with the
-destination
and
-configuration
parameters, or with the
-guid
parameter.
71
A P P E N D I X C
Installing and maintaining Gallery content
Flags
The following table defines available flags for Gallery Setup.
Flag
-remote
-verbose
-overrideproxy
-allowdownload
-forcedest
Purpose
Prevent Gallery Setup from registering itself with the SMART software.
Output progress of operations to standard output when working in command line mode.
Set Gallery Setup to ignore default
(system-wide or previously set) proxy settings where applicable, and use a proxy specified by the
-proxy
parameter (
server:port
format), using a user name and password provided by the
-username
and
-password
parameters.
Notes
This disables the
Check for
Updates
feature and prevents users from updating the content.
You can set a user name and password without
-overrideproxy
, and still use it for authentication with the default proxy.
Download the Gallery collection from the default URL specified in the configuration.
Share Gallery content across users.
Use this flag with the
-installall
or
-installsome
parameters when you omit the
-source
parameter.
Parameters
The following table defines available parameters for Gallery Setup.
Parameter
-source
Value
[Path]
-destination
[Path]
-configuration
[Path]
Purpose
Define the path to a local or network folder where the Gallery content is stored before installation.
Define the path to a local or network folder where Gallery
Setup installs the Gallery content.
Define the full path to a
.gallerycollection file, including the file name.
Notes
If you omit this parameter, the installation program uses the default URL from the Gallery configuration, as specified by the
-guid
or
-configuration
parameters.
If you omit this parameter,
Gallery Setup uses this default path found in the computer’s registry.
If you omit this parameter, you must provide the
-guid
parameter to specify a known
Gallery collection.
72
A P P E N D I X C
Installing and maintaining Gallery content
Parameter
-proxy
--
--
-guid c ui
Value Purpose Notes
[Server:Port]
Specifies the proxy used by
Gallery Setup when you include the
-overrideproxy
flag.
[Identifier]
[Alias]
Specify a known Gallery collection to work with.
A Gallery collection is known if
Gallery Setup has already opened its .gallerycollection file.
In this situation, use this parameter instead of the
-configuration
parameter.
Download or install the category of the Gallery collection identified by
[Alias]
.
Use this parameter with the
-downloadsome
and
-installsome
commands.
You can include several
-c
parameters in a single command.
Valid
[Alias]
values for the
Gallery Essentials collection are: l
admin
l
arts
l
english
l
geography
l
history
l
math
l
people
l
science
l
special
l
sports
N/A Specify the user interface level.
Use this parameter to show a progress indicator and error messages. If you don’t include this parameter, Gallery Setup works silently without a user interface.
Use
-register
with the
-downloadall
or
-downloadsome
parameters to display the full user interface.
Use
-register
with the
-installall
or
-installsome
parameters to display a minimal user interface.
Examples
Downloading a Gallery collection
Use the following command to copy a Gallery collection from a specific source folder to a common destination folder:
"
[Path]
\Gallery Setup.exe" --downloadall --destination "
[Path]
"
--configuration "
[Path]
"
73
A P P E N D I X C
Installing and maintaining Gallery content
Downloading certain categories of a Gallery collection
Use the following command to copy only certain categories of a Gallery collection from a specific source folder to a common destination folder:
"
[Path]
\Gallery Setup.exe" --downloadsome --destination "
[Path]
"
--configuration "
[Path]
" --c "
[Alias 1]
" --c "
[Alias 2]
"
Installing a Gallery collection
Use the following command to install a Gallery collection from the default source (as defined in the
.gallerycollection file) to a specific destination folder:
"
[Path]
\Gallery Setup.exe" --installall --allowdownload --destination
"
[Path]
" --configuration "
[Path]
"
Installing certain categories of a Gallery collection
Use the following command to install certain categories of a Gallery collection from the default source
(as defined in the .gallerycollection file) to a specific destination folder:
"
[Path]
\Gallery Setup.exe" --installsome --remote --source "
[Path]
"
--allowdownload --destination "
[Path]
" --configuration "
[Path]
"
--c "
[Alias 1]
" --c "
[Alias 2]
"
Registering installed Gallery collections
If you installed Gallery collections to a network location, use the following command to register the
Gallery content with the SMART software on each user’s computer:
"
[Path]
\Gallery Setup.exe" --register --remote --forcedest
--destination "
[Path]
" --configuration "
[Path]
"
Removing a Gallery collection
Use the following command to remove the Gallery Essentials collection:
"
[Path]
\Gallery Setup.exe" --uninstall --guid gallery.smarttech.com
T I P
To automate the removal of a Gallery collection, you can use the command in a batch file as a startup script.
74
A P P E N D I X C
Installing and maintaining Gallery content
Changing Gallery content locations
After installing the software, you can do the following: l
Change the location of the
My Content
folder.
l
Create or connect to a
Team Content
folder.
l
Connect to an RSS feed.
Starting the software in Administration mode
Before you can maintain content folders, you must start the software in Administration mode.
g
To start SMART Notebook software in Administration mode
1. Open a Command Prompt window.
2. Type the following command:
"
[Path]
\Notebook.exe" /admin
Where
[Path]
is the path to the SMART Notebook software program folder.
N O T E
The default path is
[Programs folder]
\SMART Technologies\Education Software
.
3. Press ENTER.
SMART Notebook software starts in Administration mode.
Changing the location of the My Content folder
The
My Content
folder is a location where teachers and students can store content for their individual use.
You can specify the location of the
My Content
folder during installation or afterward.
g
To change the location of the My Content folder after installation
1. Start the software in Administration mode (see
Starting the software in Administration mode
2. Click the
Gallery
tab.
3. Click the
Click here for more Gallery options
icon , and then select
Administration:
Content Locations
.
The
Administration: Content Locations
dialog box appears.
75
A P P E N D I X C
Installing and maintaining Gallery content
4. Click
Browse
.
The
Browse For Folder
dialog box appears.
5. Browse to and select the new
My Content
folder, and then click
OK
.
6. Click
Close
.
7. Close the software.
Creating or connecting to Team Content folders
All users can create new content and save it in their
My Content
folders. To allow users to share content, you must create or connect to a
Team Content
folder.
T I P
If you create a
Team Content
folder on a computer’s hard disk, the folder is available only to users of that computer. However, if you create a
Team Content
folder on a server, the folder is available to all users on the school’s network with read and write access to the folder.
g
To create a new Team Content folder
1. Start the software in Administration mode (see
Starting the software in Administration mode
2. Click the
Gallery
tab.
3. Click the
Click here for more Gallery options
icon , and then select
Administration:
Content Locations
.
The
Administration: Content Locations
dialog box appears.
4. Click
Create New
.
The
Browse For Folder
dialog box appears.
5. Browse to and select the folder you want to designate as a
Team Content
folder, and then click
OK
.
N O T E
The software adds an
imsmanifest.xml
file to the
Team Content
folder after you click
OK
.
This file identifies the folder as a
Team Content
folder.
6. Click
Close
.
7. Close the software.
76
A P P E N D I X C
Installing and maintaining Gallery content g
To connect to an existing Team Content folder
1. Start the software in Administration mode (see
Starting the software in Administration mode
2. Click the
Gallery
tab.
3. Click the
Click here for more Gallery options
icon , and then select
Administration:
Content Locations
.
The
Administration: Content Locations
dialog box appears.
4. Click
Add Existing
.
The
Browse For Folder
dialog box appears.
5. Browse to and select the
Team Content
folder, and then click
OK
.
6. Click
Close
.
7. Close the software.
g
To disconnect a Team Content folder
1. Start the software in Administration mode (see
Starting the software in Administration mode
2. Click the
Gallery
tab.
3. Click the
Click here for more Gallery options
icon , and then select
Administration:
Content Locations
.
The
Administration: Content Locations
dialog box appears.
4. Select the folder in the
Team Content
list, and then click
Remove
.
I M P O R T A N T
If you installed the Gallery Essentials and Lesson Activity Toolkit collections, folders for those collections appear in the
Team Content
list. Do not remove these folders from the list, or users will not be able to access these collections.
5. Click
Close
.
6. Close the software.
Connecting to an RSS feed
You can connect to a public or private RSS feed to send information to your school’s
SMART Notebook software and SMART Notebook SE software users through the
Gallery
tab.
77
A P P E N D I X C
Installing and maintaining Gallery content
RSS is a format for delivering regularly changing web content. Many news-related websites, blogs and other publishers broadcast their content as RSS feeds.
g
To connect to an RSS feed
1. Start the software in Administration mode (see
Starting the software in Administration mode
2. Click the
Gallery
tab.
3. Click the
Click here for more Gallery options
icon , and then select
Administration:
Content Locations
.
The
Administration: Content Locations
dialog box appears.
4. Type the URL of the RSS feed in the
Online Resources
box.
5. Click
Close
.
6. Close the software.
78
Appendix D:
Appendix D
Removing previous versions of
SMART Board software
Removing SMART Board software 9.x
Removing SMART Board software 8.x
Removing SMART Board software 7.x
If you have version 9.0 or earlier of SMART Board software on your computers, SMART recommends that you remove it before installing new software.
Removing SMART Board software 9.x
You or your predecessor installed SMART Board software 9.x using the Windows Installer 3.1
installation utility.
You can remove SMART Board software 9.x using the installation package (if you still have it) or the product code.
g
To remove SMART Board software 9.x
Run the following command to remove the software using the installation package: msiexec /x "
[Path]
\SMART Board Software.msi"
[Parameter]
Where o
[Path]
is the path to the
SMART Board Software.msi
file.
OR o
[Parameter]
is the installation parameter (see
79
A P P E N D I X D
Removing previous versions of SMART Board software
Run the following command to remove the software using the product code: msiexec /x
[Product code] [Parameter]
Where o
[Product code]
is the product code for the version of SMART Notebook software you’re removing, including the braces (“{” and “}”).
Version
9.0.1.57
9.1.0.40
9.1.3.47
9.1.4.51
9.5.x.x
9.7.x.x
Product code
{D2EC1505-9F11-4A94-9644-DCD0299DE491}
{BD6516BA-2314-4F2C-9ECD-29BCB1074AFB}
{8D757887-9CD3-4F97-9873-E049E1C264CE}
{EE2A5345-CBE2-4932-83B0-D628D0D24AF8}
{B72EB184-2A42-4B3C-8F8F-D7EF163829B4}
{46486451-E60F-42C3-92D7-796D8594688A} o
[Parameter]
is the installation parameter (see
Removing SMART Board software 8.x
You or your predecessor installed SMART Board software 8.x using the InstallShield® installation utility.
You can remove SMART Board software 8.x by creating a
setup.iss
file and then using the file to remove the software from all computers.
N O T E
You need to create the
setup.iss
file only once. You can then use the file to remove the same version of SMART Board software from other computers on your network using a batch file or startup script.
Before completing the following procedures, determine the product code for the version of
SMART Board software installed on the computers.
Version
8.0.0.52
8.0.1
8.1.0
8.1.1.24
8.1.2.8
8.1.3.17
8.1.4.19
Product code
{7823065C-AA64-425D-A9A3-18BF7B99E944}
{F414173A-7BE1-46C6-811A-51277A4D9E7B}
{155FBC4E-CF09-4698-961B-DF9787E6B8B8}
{7AD771BB-B681-4659-B7FA-223FCB1FDF56}
{55C574CA-8D71-46F1-9897-98DAE55C0394}
{10D2A154-D221-4455-8426-E67D12C092F9}
{41CEFD25-0D33-44EA-A19C-5A1EBABFC041}
80
A P P E N D I X D
Removing previous versions of SMART Board software
The product code includes the braces (“{” and “}”).
g
To create the setup.iss file
1. Run the following command:
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /r/z-AddRemove --RemoveReg
The InstallShield installation utility removes SMART Board software and creates a
setup.iss
file in the root Windows folder.
2. Move the
setup.iss
file to a location where all computers can access it.
g
To remove SMART Board software 8.x
Run the following command:
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /s /z-AddRemove -RemoveReg
/f1"
[Path to the setup.iss file]
\setup.iss"/f2"
[Path to the uninst.log file]
\uninst.log"
Where o
[Path to the setup.iss file]
is the path to the
setup.iss
file you created in the previous procedure.
o
[Path to the uninst.log file]
is the path to the log file that the InstallShield installation utility creates when it removes the software.
Removing SMART Board software 7.x
You or your predecessor installed SMART Board software 7.x using the InstallShield installation utility.
You can remove SMART Board software 7.x by creating a
setup.iss
file and then using the file to remove the software from all computers.
N O T E
You need to create the
setup.iss
file only once. You can then use the file to remove the same version of SMART Board software from other computers on your network using a batch file or startup script.
81
A P P E N D I X D
Removing previous versions of SMART Board software
Before completing the following procedures, determine the product code for the version of
SMART Board software installed on the computers.
Version
7.0
7.1
7.1.1
7.1.2
7.1.3
GUID
{72226969-B20E-439E-B0A1-FD1EE5403CCF}
{93458E57-1D12-4F01-980D-62D5430048D0}
{14AE43DA-37FE-4B73-99C0-D02E01B48837}
{28E27E54-92A5-4717-A4E5-837D7E894AB4}
{FF332803-8B46-4392-A2F4-8790735F7B26}
The product code includes the braces (“{” and “}”).
g
To create the setup.iss file
1. Run the following command:
RunDll32
C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\0701\Intel32\
Ctor.dll,LaunchSetup "C:\Program Files\InstallShield
Installation Information\GUID\setup.exe" /r -l0x9 --AddRemove
The InstallShield installation utility removes SMART Board software and creates a
setup.iss
file in the root Windows folder.
2. Move the
setup.iss
file to a location where all computers can access it.
g
To remove SMART Board software 7.x
Run the following command:
RunDll32
C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\0701\Intel32\
Ctor.dll,LaunchSetup "C:\Program Files\InstallShield
Installation Information\GUID\setup.exe" /s -l0x9 --AddRemove
/f1"
[Path to the setup.iss file]
\setup.iss" /f2"
[Path to the setup.log file]
\setup.log"
Where o
[Path to the setup.iss file]
is the path to the
setup.iss
file you created in the previous procedure.
o
[Path to the setup.log file]
is the path to the log file that the InstallShield installation utility creates when it removes the software.
82
A P P E N D I X D
Removing previous versions of SMART Board software
Cleaning the registry
When you remove a previous version of SMART Notebook software, the removal process can leave behind registry entries, preventing you from installing the latest version of the software.
C A U T I O N
Use caution when you open the Windows registry editor. If you incorrectly modify the Windows registry, you can damage your computer’s operating system. Back up your registry before performing the following procedures.
If you’re still having difficulties with remaining registry files, ensure that you have administrator rights and manually search the registry for SMART Notebook software, SMART Board software or
SMART Product Drivers files.
C A U T I O N
Do not remove files for other SMART products you want to retain. If you are unsure, contact
SMART Support ( smarttech.com/contactsupport ).
g
To manually clean the registry
1. Press START+R.
The
Run
dialog box appears.
2. Type
regedit
, and click
OK
.
The
Registry Editor
window appears.
3. Locate SMART files in the following locations, and then delete them: o
HKEY_CURRENT_USER\Software\SMART Technologies Inc.
o
HKEY_LOCAL_MACHINE\Software\SMART Technologies Inc.
o
HKEY_CURRENT_USER\Software\SMART Technologies
o
HKEY_LOCAL_MACHINE\Software\SMART Technologies
4. Close the
Registry Editor
window.
5. Restart your computer.
83
85
Index
3
3D Tools for SMART Notebook
A
B
C
Customer Experience Program 13, 45
D
document camera See SMART Document
Camera
drivers
Print Capture See Print Capture Driver
E
education standards database 16
Essentials for Educators collection See Gallery Essentials collection
examples
Windows Installer command lines 56
F
Flash See Adobe Flash Player
I N D E X
G
Gallery content
H
I
Install Manager See SMART Install
Manager
J
K
86
L
Lesson Activity Toolkit collection 48
M
Math Tools See SMART Notebook Math
Tools
Microsoft .NET framework 3, 20
Microsoft Visual Studio Tools for Office 3, 20
N
O
P
people and culture content 48, 73
I N D E X
prerequisites
R
S
serial number See product key
SMART Document Camera 14, 49, 53
SMART Install Manager
about 7 downloading 7 installing 7
SMART Notebook Math Tools 11, 44
87
SMART Sync Class List Server 16
special needs content 48, 73 sports content 48, 73
T
third-party applications 23, 41
U
V
I N D E X
W
Windows 7 operating system 3, 16, 52
Windows Vista operating system 3, 16, 52
X
88
SMART Technologies smarttech.com/support smarttech.com/contactsupport
دانلود
پیوند عمومی به روز شد
پیوند عمومی به چت شما به روز شده است. You may view and manage your chat links after registration here.
پیوند عمومی سند
تبلیغات