advertisement
Avaya 1200 Series IP Deskphones with SIP Software — User Guide
IP Office 7.0
Document Status: Standard
Document Version: 01.01
Document Number: AV40050-111
Date: March 2011
© 2011 Avaya Inc. All Rights Reserved.
Notices
While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
Documentation disclaimer
Avaya shall not be responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. End User agree to indemnify and hold harmless Avaya,
Avaya’s agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation, to the extent made by End User.
Link disclaimer
Avaya is not responsible for the contents or reliability of any linked Web sites referenced within this site or documentation(s) provided by Avaya. Avaya is not responsible for the accuracy of any information, statement or content provided on these sites and does not necessarily endorse the products, services, or information described or offered within them. Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages.
Warranty
Avaya provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language, as well as information regarding support for this product, while under warranty, is available to Avaya customers and other parties through the Avaya Support Web site: http://www.avaya.com/support
Please note that if you acquired the product from an authorized reseller, the warranty is provided to you by said reseller and not by
Avaya.
Licenses
THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE, HTTP://SUPPORT.AVAYA.COM/
LICENSEINFO/ ARE APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR INSTALLS AVAYA SOFTWARE,
PURCHASED FROM AVAYA INC., ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER (AS APPLICABLE)
UNDER A COMMERCIAL AGREEMENT WITH AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS OTHERWISE
AGREED TO BY AVAYA IN WRITING, AVAYA DOES NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED
FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN AVAYA AUTHORIZED RESELLER, AND AVAYA
RESERVES THE RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE USING OR SELLING THE
SOFTWARE WITHOUT A LICENSE. BY INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR AUTHORIZING
OTHERS TO DO SO, YOU, ON BEHALF OF YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,
DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER REFERRED TO INTERCHANGEABLY AS "YOU" AND
"END USER"), AGREE TO THESE TERMS AND CONDITIONS AND CREATE A BINDING CONTRACT BETWEEN YOU
AND AVAYA INC. OR THE APPLICABLE AVAYA AFFILIATE ("AVAYA").
Copyright
Except where expressly stated otherwise, no use should be made of the Documentation(s) and Product(s) provided by Avaya. All content in this documentation(s) and the product(s) provided by Avaya including the selection, arrangement and design of the content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property laws including the sui generis rights relating to the protection of databases. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way any content, in whole or in part, including any code and software. Unauthorized reproduction, transmission, dissemination, storage, and or use without the express written consent of Avaya can be a criminal, as well as a civil offense under the applicable law.
Third Party Components
Certain software programs or portions thereof included in the Product may contain software distributed under third party agreements
("Third Party Components"), which may contain terms that expand or limit rights to use certain portions of the Product ("Third Party
Terms"). Information regarding distributed Linux OS source code (for those Products that have distributed the Linux OS source code), and identifying the copyright holders of the Third Party Components and the Third Party Terms that apply to them is available on the Avaya Support Web site: http://support.avaya.com/Copyright.
Trademarks
The trademarks, logos and service marks ("Marks") displayed in this site, the documentation(s) and product(s) provided by Avaya are the registered or unregistered Marks of Avaya, its affiliates, or other third parties. Users are not permitted to use such Marks without prior written consent from Avaya or such third party which may own the Mark. Nothing contained in this site, the documentation(s) and product(s) should be construed as granting, by implication, estoppel, or otherwise, any license or right in and to the Marks
without the express written permission of Avaya or the applicable third party. Avaya is a registered trademark of Avaya Inc. All non-
Avaya trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support. Web site: http://www.avaya.com/support
Contact Avaya Support
Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Web site: http:// www.avaya.com/support
Contents
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
IP Deskphone controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
IP Deskphone display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning the IP Deskphone LCD display screen . . . . . . . 16
Context-sensitive soft keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Idle display screen after dial pad input . . . . . . . . . . . . . . . 20
In-call context-sensitive soft keys . . . . . . . . . . . . . . . . . . . 21
Navigation keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Available IP Deskphone call features . . . . . . . . . . . . . . . . . . . 31
Security features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Secure connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Regulatory and safety information . . . . . . . . . . . . . . . . . . . 33
DenAn regulatory notice for Japan . . . . . . . . . . . . . . . . . . . . . 35
Using your Avaya 1200 Series IP Deskphone . . . . . . . . . . 36
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Connecting the components . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Attaching the foot stand (optional) . . . . . . . . . . . . . . . . . . . . . 38
Connecting the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Connecting the headset (optional) . . . . . . . . . . . . . . . . . . . . . 39
Connecting AC power (optional) . . . . . . . . . . . . . . . . . . . . . . . 40
Connecting the LAN Ethernet cable . . . . . . . . . . . . . . . . . . . . 40
Connecting the PC Ethernet cable . . . . . . . . . . . . . . . . . . . . . 41
Wall mounting (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3
Contents
Entering text using the IP Deskphone dialpad . . . . . . . . . . . . 42
Configuring the dialpad to alphanumeric dialing . . . . . . . 45
Accessing the Avaya 1200 Series IP Deskphone . . . . . . . 47
Logging on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Automatic login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting the domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Password protection for domains . . . . . . . . . . . . . . . . . . . 49
Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Logging on to your IP Deskphone . . . . . . . . . . . . . . . . . . 51
Configuring the duration of the login . . . . . . . . . . . . . . . . 54
Timed logoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Timed logoff while the IP Deskphone is idle . . . . . . . . . . 55
Timed logoff while on a call . . . . . . . . . . . . . . . . . . . . . . . 55
Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
User Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Confirmation logon screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Logging off from the Avaya 1200 Series IP Deskphone . . . . . 58
Making an emergency call . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuring Avaya 1200 Series IP Deskphones . . . . . . . . 60
Adjusting the display screen contrast . . . . . . . . . . . . . . . . . . 60
Creating the idle screen text display . . . . . . . . . . . . . . . . . . . . 61
Configuring Menu auto back-out . . . . . . . . . . . . . . . . . . . . . . 62
Selecting a ring pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Adjusting the volume of the Handset, Headset, and Handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Selecting the date and time format . . . . . . . . . . . . . . . . . . . . . 69
4
Contents
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Making a call using off-hook dialing . . . . . . . . . . . . . . . . . . . . 75
Making a call using on-hook dialing . . . . . . . . . . . . . . . . . . . . 77
Using handsfree calling . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Making a call using redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Making an intercom call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Making paging calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Caller identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Answering an incoming call . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Ignoring an incoming call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Configuring Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Receiving intercom calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Receiving paging calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Receiving calls to a pickup group . . . . . . . . . . . . . . . . . . . . . . 88
Receiving voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Forwarding calls to another number . . . . . . . . . . . . . . . . . . . . 90
The Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Viewing the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Initiating a call from the Address Book . . . . . . . . . . . . . . . . . . 92
Adding a contact to your Address Book . . . . . . . . . . . . . . . . . 94
Editing a contact in your Address Book . . . . . . . . . . . . . . . . . 95
Copying information to the Address Book . . . . . . . . . . . . . . . 99
Searching for a contact in the Address Book . . . . . . . . . . . . 101
Using the Search feature in the Address Book . . . . . . . 102
Using the Search feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Using Local Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
5
Contents
Call Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Accessing the Call Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Managing calls in the Call Inbox while not on a call . . . . 106
Viewing the details of a call in the Call Inbox . . . . . . . . . 109
Managing missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Missed Calls Notification . . . . . . . . . . . . . . . . . . . . . . . . 111
Initiating a call from the Call Inbox . . . . . . . . . . . . . . . . . 113
Deleting calls in your Call Inbox . . . . . . . . . . . . . . . . . . . 114
Accessing the calls in your Call Inbox during a call . . . . 115
While on an active call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Making a new call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Initiating a call using the active call context-sensitive soft key menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Placing a call On Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Multiple calls On Hold . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Using call conferencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Transferring a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Using the Call Park feature . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Retrieving a Parked Call . . . . . . . . . . . . . . . . . . . . . . . . 130
Configuring custom settings . . . . . . . . . . . . . . . . . . . . . . . 131
Programmable keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Assigning functions to programmable keys . . . . . . . . . . . . . 132
Configuring speed dial keys . . . . . . . . . . . . . . . . . . . . . . . . . 134
Querying programmable keys . . . . . . . . . . . . . . . . . . . . . . . 135
Configuring Privacy settings . . . . . . . . . . . . . . . . . . . . . . . . . 136
Incoming call privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Outgoing call privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Audio Codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Audio Codec Selection . . . . . . . . . . . . . . . . . . . . . . . . . . 139
6
Contents
Audio Codec Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Maintaining the IP Deskphone . . . . . . . . . . . . . . . . . . . . . 140
Viewing additional phone information . . . . . . . . . . . . . . 140
Accessing the services menu . . . . . . . . . . . . . . . . . . . . . . . . 141
Checking for updates . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Resetting the IP Deskphone phone . . . . . . . . . . . . . . . . 143
Erasing the user data . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Automatic remote software updates . . . . . . . . . . . . . . . . . . . 150
File Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Visual indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Visual Alerter/Message Waiting Indicators . . . . . . . . . . . . . . 152
Monitoring other extensions . . . . . . . . . . . . . . . . . . . . . . . . . 152
Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Fixed keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Commonly used functions . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Context-sensitive soft keys . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Display screen icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Third party terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Third Party Terms for Avaya 11xx 12xx sw release 3.0 thru 4.0
(Aug - Nov 2010) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
GNU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Zlib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Libpng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Kern_random . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Wchar functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Libjpeg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
7
Contents
T-Rex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
8
Welcome
Welcome
The Avaya 1200 Series offers two models of IP Deskphones: the Avaya
1220 and the1230 IP Deskphones. The Avaya 1220 and 1230 IP
Deskphones bring voice and data to your desktop by connecting directly to a Local Area Network (LAN) through an Ethernet connection. The IP
Deskphones communicatee using Session Initiated Protocol (SIP) after the software is upgraded to a SIP-enabled version.
Basic features
The Avaya 1200 Series IP Deskphones include the following features:
• lines with 25-character display capability
— 1220 IP Deskphone: 5
— 1230 IP Deskphone: 9
• self-labeled line keys
— 1220 IP Deskphone: 4
— 1230 IP Deskphone: 10
• four context sensitive soft keys (self labeled)
• six specialized feature keys
• six fixed call processing keys (three with LED status):F
— Mute
— Handsfree
— Goodbye
— Applications
— Headset
— Hold
• volume up/down key to separately adjust the ringer, speaker, headset, and handset’s volume
• four-way navigation cluster plus Enter key
• wall-mountable
• LCD display screen
9
Welcome
• high quality speakerphone
• hearing aid compatibility
• handset jack
• headset jack
• 10/10 Ethernet ports
— one Ethernet port for LAN connection
— one Ethernet port for optional PC connection
• Power over Ethernet (PoE) through the LAN port, or power through a supported AC adapter
• Accessory Expansion Module (AEM) port to connect the expansion module.
IP Deskphone controls
The following figures show the location of controls on each model of IP
Deskphone. Figure 1 on page 11 shows the Avaya 1220 IP Deskphone; the Avaya 1230 IP Deskphone is shown in Figure 2 on page 12 .
10
Figure 1: Avaya 1220 IP Deskphone
Welcome
11
Welcome
Figure 2: Avaya 1230 IP Deskphone
This section describes the controls on the 1200 Series IP Deskphones.
Your IP Deskphone can have fixed keys with icons or with labels. This document presents both versions of the fixed key.
When a message is waiting, the red
Message Waiting/Incoming Call indicator
LED at the top center of the IP Deskphone flashes.
Also, if configured, this indicator glows when the ringer sounds.
12
(Copy)
(Services)
(Quit)
(Inbox)
Welcome
Line keys or speed dial keys are located on either side of the display area and are labeled on the LCD display. You can program these keys as either line or speed dial keys (for one touch dialing). These keys select which line is in use when the IP
Deskphone is active and also act as status monitoring keys when a number is set as a speed dial.
Context-sensitive soft keys are located below the display area. The LCD label above each key changes based on the active feature.
Press the Copy key to copy contact information from one source, such as the
Address Book to a destination, such as a feature key.
When the IP Deskphone is idle, press the
Services key to briefly display the software version, network address, and Ethernet address. When you navigate the menu, press the Services key to back up one level to the previous display.
Press the Quit key to close an active menu.
The state of active calls is not affected with you press the Quit key.
Press the Inbox key to access your Call
Inbox.The Call Inbox stores all incoming calls on an active IP Deskphone.
13
Welcome
(Redial)
(Directory)
(Volume)
(Mute)
Press the Redial key to display a list of 15 most recently dialed numbers.You can select a number from the redial list and then dial it, save in the phonebook, delete, or check information about the call.
Press the Directory key to access your phonebook.
Use the Navigation Key Cluster to scroll through menus and lists that appear on the
LCD display screen or for text entry. The outer part of this key cluster rocks for up, down, left, and right movements. For more information, see “Navigation keys” on page 29 .
Use the Volume control buttons to adjust the volume of the ringer, handset, headset, speaker, and the Handsfree feature. Press the top button to increase the volume, and press the bottom button to decrease the volume.
Press the Mute key to listen to the call without transmitting. Press the Mute key again to return to two-way conversation. The
Mute key applies to handsfree, handset, and headset microphones.
Note: When you enable mute, a red
LED on the Mute key remains lit.
14
(Handsfree)
(Goodbye)
(Headset)
(Hold)
Welcome
Press the Handsfree key to activate the built-in speaker and microphone.
Note: The Handsfree LED indicator on the Handsfree key lights to indicate when handsfree is active.
Use the Enter key, at the center of the
Navigation Key Cluster , to select menu items or to confirm changes.
Note: The Enter key has the same function as the context-sensitive soft keys Select and Set .
Press the Goodbye/Release key to terminate an active call. When multiple calls are active, press the Goodbye/Release key to end the highlighted call.
Use the Goodbye/Release to close menu navigation or cancel user tasks.
Press the Headset key to answer a call using the headset or to switch a call from the handset or handsfree to the headset.
Note: The Headset LED indicator on the
Headset key lights to indicate that the headset is in use.
Press the Hold key to put an active call on hold. Press the Hold fixed key to return to a call on hold.
You can have several calls in a hold state.
15
Welcome
(Expand)
Press the Expand key to access the Instant
Messaging Log.
Use the Dialpad to enter numbers and text.
To navigate to an item in a menu, press the corresponding number on the dialpad to activate the item or to continue to navigate the list of items.
IP Deskphone display
Your Avaya 1200 Series IP Deskphone display is divided into two display areas:
• The upper display area is for information such as caller number, caller name, feature prompt string, user-entered digits, date and time information, and telephone information.
• The lower display area provides labels for the four context-sensitive soft keys.
Cleaning the IP Deskphone LCD display screen
To clean the LCD display screen, gently wipe with a soft, dry cloth.
CAUTION
Do not use any liquids or powders on the
IP Deskphone. Using anything other than a soft, dry cloth can contaminate IP
Deskphone components and cause premature failure.
Context-sensitive soft keys
Your Avaya 1200 Series IP Deskphone has four context-sensitive soft keys beneath the LCD screen. The context-sensitive soft keys access
16
Welcome different features and menus depending on the state of the IP Deskphone and the menu you access.
Table 1 on page 17 lists the context-sensitive soft keys that you can use to access menu items..
Table 1: Menu items accessed through context-sensitive soft keys
(Part 1 of 4)
Item Function
Feature Press soft key to activate features on your phone. When you press the Feature soft key, a prompt displays, where you can enter the code of the feature you want to activate. Use the Feature soft key to activate the following functions:
— Conference
— Call Forward
— Last Number Redial
— Page
— Dial Voice Call (Intercom call)
— Call Park/Retrieve
— Call Pickup Group
— Call Pickup Extn
— Do Not Disturb
— Voice Mail Access
— Button Programming
(Programmable keys)
— Button Programming Query
The Feature soft key is contextsensitive.
17
Welcome
Table 1: Menu items accessed through context-sensitive soft keys
(Part 2 of 4)
Item Function
Msgs
Redial or New Call
Press the Msgs context-sensitive soft key to access the following features:
1.
Voice Mail—use to call your Voice
Mail number.
2.
Missed Call Notification—use to access your Missed Call details.
Press the Redial context-sensitive soft key to redial the last dialed number.
If there is no stored redial number, the
NewCall context-sensitive soft key appears and has the same effect as pressing the primary user line key
(dial prompt).
More… Press the More… context-sensitive soft key to view the following softkeys:
— abc
— Prefs abc or 123
Press the abc context-sensitive soft key to
• abc context-sensitive soft key must be displayed.
• abc context-sensitive soft key to display the 123 context-sensitive soft key on the menu list.
18
Welcome
Table 1: Menu items accessed through context-sensitive soft keys
(Part 3 of 4)
Item Function
Prefs Press the Prefs context-sensitive soft key to display the Preferences menu.
The menu items include the following:
1.
Display—use to adjust the display settings of the LCD screen.
2.
Audio—use to adjust tones and volume settings.
3.
Feature Options—use to configure the following:
— Call Ignore Action
— Missed Call Notification
19
Welcome
Table 1: Menu items accessed through context-sensitive soft keys
(Part 4 of 4)
Item Function
Prefs 4.
Language—use to change the interface language.
5.
Misc Options—use to access the following options:
— Alpha Dialing
— Search Method
— Incoming Privacy
— Outgoing Privacy
— Hold Mode: Private
— Time
6.
Network—use to access the following:
— Server Settings
— Device Settings
— Diagnostics
— Licensing
— Lock
Prefs 7.
User Settings - use to modify the following:
— Call Settings
Idle display screen after dial pad input
After you enter information using the dial pad (there is no dial tone or preceding line selection), the context-sensitive soft keys displayed on the idle screen appear as shown in Table 7 on page 43 .
20
Welcome
Table 2 on page 21 lists the context-sensitive soft keys that you can use to access menu items after dial pad input.
Table 2: Menu items accessed after dial pad input through context-sensitive soft keys
Item Function
Send abc or 123
Press the Send context-sensitive soft key to dial out the user input using the primary login of the IP Deskphone.
User input is run against the dialing plan.
Press the abc or 123 context-sensitive soft key to toggle between alpha and numeric input mode.
Subject Press the Subject context-sensitive soft key to set a subject line to your outgoing call before pressing the Send contextsensitive soft key.
In-call context-sensitive soft keys
When a call is active, use the context-sensitive soft keys to access menu items.
21
Welcome
Table 3 on page 22 lists the context-sensitive soft keys you can use to access menu items during an in-call session.
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 1 of 7)
Item Function
Trnsfer
Audio
Press the Trnsfer context-sensitive soft key to transfer the current call to another location or to another contact.
Press the Audio context-sensitive soft key to access the following features:
Tones
• Ring Pattern
— Select test patterns from 1 to 8
• Alerting Volume
— Set Desired volume
22
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 2 of 7)
Function Item
Audio Voice
• Set the volume for the following:
— Handset Volume
— Headset Volume
— Handsfree Volume
Codecs
Audio
Select the Audio Codecs:
• G722 (wideband codec)
• PCMU (standard u-law)
• G729 (729 codec)
• PCMA (standard a-law)
Note: You can change the audio settings to improve audio quality based on the available band width. If the Internet bandwidth is low, you can improve the audio quality by changing the audio setting to low.
• Monitor Audio Quality—used to view details about the audio quality of an active call.
OR
23
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 3 of 7)
Item
Activate
More…
Function
The Activate context-sensitive soft key appears when the call is not active. The most common usage of this key is when the call displayed onscreen is a call that was parked against the user (or a call that the user placed on hold).
Note: The Activate contextsensitive soft key never appears at the same time as the Audio context-sensitive soft key.
Press the More… context-sensitive soft key to select a new menu list of context-sensitive soft keys (three menu lists are available).
When you press the More… context-sensitive soft key, a different selection of contextsensitive soft keys appears.
24
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 4 of 7)
Item Function
More… • If you press the More… context-sensitive soft key once from the first menu list, you access the following contextsensitive soft keys:
[NewCall] [More.…]
• If you press the More… context-sensitive soft key from the first menu list twice, you access the following contextsensitive soft keys:
[Prefs] [ ] [ ] [More…
• If you press the More… context-sensitive soft key from the first menu list three times, you return to the first menu list with the following contextsensitive soft keys.
[Trnsfer] [Audio] [More…
When you press the More… context-sensitive soft key for the first time, the following context-sensitive soft keys appear on the menu list.
NewCall Press the NewCall contextsensitive soft key to obtain a dial tone to place another call during an active call or to a make a conference call.
The NewCall context-sensitive soft key behaves like the Conf contextsensitive soft key.
25
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 5 of 7)
Item Function
When you press the More… context-sensitive soft key for the second time, the following context-sensitive soft keys appear on the menu list.
Prefs Press the Prefs context-sensitive soft key to display the Preferences menu.
The menu items include the following:
1.
Display—use to adjust the display settings of the LCD screen.
26
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 6 of 7)
Item Function
Prefs
2.
Audio—use to adjust tones and volume setting.
3.
Feature Options—use to configure the following:
— Call Ignore Action
— Call Fwd Notification
— Answer Mode Settings appear when the Auto
Answer Mode is enabled on the IP Deskphone.
4.
Language—use to change the interface language.
5.
Misc Options—use to access the following options:
— Alpha Dialing
— Search Method
— Incoming Privacy
— Outgoing Privacy
— Hold Mode: Private
— Time
27
Welcome
Table 3: Menu items accessed during an in-call session through contextsensitive soft keys (Part 7 of 7)
Item Function
Prefs
More…
Unlock
6.
Network—use to access the following:
— Server Settings
— Device Settings
— Diagnostics
— Disable screensaver
— Licensing
— Lock
7.
User Settings—use to modify the following:
— Call Settings
Press the More… context-sensitive soft key to return to the first menu list of context-sensitive soft keys.
The next available menu list contains the following contextsensitive soft keys:
[Trnsfer] [Audio] [More…]
The Unlock context-sensitive soft key appears if you answer a call when the IP Deskphone is locked with a password protected screensaver.
28
Welcome
Navigation keys
This section provides information about keys you can use to navigate within the menus of your IP Deskphone.
You can select menu items in one of the following ways:
• Menu items are sorted by number. Press the corresponding number on the dialpad and then press the Select soft key.
• Use the navigation key to scroll through the menu to highlight the item you want to select and then press the Select soft key.
29
Welcome
Table 4 on page 30 describes the navigation keys and their functions.
Table 4: Navigation keys and functions (Part 1 of 2)
Key
Navigation Key Cluster
Navigation Key Cluster
Function
Press the Left or Right arrows on the
Navigation Key Cluster to:
• Scroll long lines of text when you view caller ID.
Note: The IP Deskphone automatically scrolls long lines of text from right to left for entries such as in your address book or your Call Inbox. When your Search
Method is set to Index Search, you can increase the speed of the scrolling by repeatedly pressing the right navigation key or decrease the scrolling speed by repeatedly pressing the left navigation key. For more information, see “Copying information to the Address Book” on page 99 .
• Change the slide adjustment from left to right when you adjust such things as contrast or volume.
Press the right side of the Navigation
Key Cluster to:
• Create a space when you enter and edit text.
• View the details of the selected call log entry in the Inbox.
30
Welcome
Table 4: Navigation keys and functions (Part 2 of 2)
Key
Navigation Key Cluster
Function
Press the left side of the Navigation
Key Cluster to:
• Move cursor to the left when you enter and edit text.
• Leave the detail view of the Inbox and return to the main Inbox.
Operates like the Back contextsensitive soft key.
Press the up or down arrows on the
Navigation Key Cluster to:
• Erase a character (backspace) when you enter and edit text.
• Highlight items in a list, such as
Address Book entries or items in your Call Inbox.
Note 1: Move the cursor from line to line when entering and editing text or data.
Note 2: To scroll through a list of items, you can press and hold the up or down key.
Available IP Deskphone call features
The 2000 Series IP Deskphones are supported by the Avaya IP Office 7.0 call server. Your system administrator uses IP Office to assign call features to your IP Deskphone. To determine which features are available or to activate features, contact your system administrator or service provider.
Note: Not all service providers support the entry of a SIP address to initiate a call; for example, [email protected]. Some service
31
Welcome providers require that you enter a Directory Number (DN) to initiate a call, for example, 555-5555. Contact your system administrator to determine whether your Call Server supports SIP address dialing.
Security features
Before you can use your IP Deskphone, an ID and password must be assigned to your IP Deskphone. This security measure ensures that, after you log off, calls cannot be made from your IP Deskphone and features, such as Address Book, are inaccessible. Your ID and password also prevent unauthorized access to your user profile.
Secure connection
Call security is identified by the presence of a security icon (padlock) that is displayed on the IP Deskphone screen.
After the IP Deskphone is registered with the SIP Proxy, you can view the security icon when:
• the IP Deskphone is idle
• you are on an active call
32
Regulatory and safety information
Regulatory and safety information
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body (excluding the handset). This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter.
Table 5 lists EMC compliance for various jurisdictions.
Table 5: EMC compliance (Part 1 of 2)
Jurisdiction Standard
United
States
Canada
Australia/
New
Zealand
FCC CFR 47 Part
15
ICES-003
AS/NZ CISPR 22
CISPR 22
Description
Class B Emissions: FCC Rules for
Radio Frequency Devices (see Notes
1 and 2)
Class B Emissions: Interference-
Causing Equipment Standard: Digital
Apparatus
Class B Emissions: Information technology equipment - Radio disturbance
33
Regulatory and safety information
Table 5: EMC compliance (Part 2 of 2)
Jurisdiction Standard
European
Community
EN 55022
Japan
EN 55024
EN 61000-3-2
EN 61000-3-3
VCCI
Description
Class B Emissions: Information technology equipment - Radio disturbance
Information technology equipment -
Immunity characteristics
Limits and methods of measurement
Limits for harmonic current emissions
(equipment input current <= 16 A per phase)
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <= 16
A
Regulations for voluntary control measures.
Table 6 lists Safety compliance for various jurisdictions.
Table 6: Safety compliance
Jurisdiction Standard Description
United States UL 60950-1
Canada
Safety of Information Technology Equipment
CSA 60950-1-30 Safety of Information Technology Equipment
EN 60950-1 European
Community
Australia/New
Zealand
AS/NZS
60950.1:2003
ITE equipment - Safety - Part 1: General requirements
Safety of Information Technology Equipment
Australia: AS/ACIF S004: Voice Frequency Performance Requirements for Customer Equipment
34
Regulatory and safety information
DenAn regulatory notice for Japan
35
Using your Avaya 1200 Series IP Deskphone
Using your Avaya 1200 Series IP
Deskphone
After you familiarize yourself with its features, you can start to use the
Avaya 1200 Series IP Deskphone.
Getting started
This section provides information about how to use the Avaya 1200
Series IP Deskphones. Carefully read each of the followoing sections before you operate your IP Deskphone:
• “Before you begin” on page 37
• “Connecting the components” on page 37
• “Entering text” on page 41
• “Accessing the Avaya 1200 Series IP Deskphone” on page 47
• “Configuring Avaya 1200 Series IP Deskphones” on page 60
36
Using your Avaya 1200 Series IP Deskphone
Before you begin
CAUTION
Damage to Equipment
Consult your system administrator to ensure that you plug your IP Deskphone into a 10/100/1000 BaseT Ethernet jack.
To avoid severe damage to your IP
Deskphone, do not plug your Avaya 1200
Series IP Deskphone into a regular phone jack.
CAUTION
Your Avaya 1200 Series IP Deskphone is designed for use in an indoor environment only.
Connecting the components
Figure 3 on page 38 shows the connections on the Avaya 1200 Series IP
Deskphones.
37
Using your Avaya 1200 Series IP Deskphone
Figure 3: Connections on Avaya 1200 Series IP Deskphones
WARNING Ensure that the protective rubber cap on the
Expansion Module port is in place when the port is not in use.
Connection of anything other than the proper Expansion
Module connector to this port can cause damage to the IP
Deskphone.
Attaching the foot stand (optional)
Attach the foot stand in the appropriate slots depending on the desired angle for your Avaya 1200 Series IP Deskphone. If you insert the foot stand into the upper slots, your IP Deskphone sits at a 25-degree angle.
38
Using your Avaya 1200 Series IP Deskphone
If you insert the foot stand into the lower slots, your IP Deskphone sits at a 55-degree angle.
1.
Align the bottom tabs on the foot stand with the position 1 slots or the position 2 slots on the back of your IP Deskphone.
In position 1, the IP Deskphone sits at a 25-degree angle.
In position 2, the IP Deskphone sits at a 55-degree angle.
Figure 3 on page 38 shows the slots on the back of the IP
Deskphone.
2.
Press the foot stand into the slots until it snaps into place.
Note: If you mount your IP Deskphone on a wall, do not attach the foot stand.
Connecting the handset
Use the following procedure to connect the handset to your IP
Deskphone:
1.
Plug the end of the handset cord with the short straight section into the handset.
2.
Plug the other end of the handset cord with the long straight section into the handset jack marked with the handset symbol as shown
Figure 3 on page 38 .
3.
(Optional) Thread the cord through the channel in the foot stand (if installed) so that it exits on the side of the foot stand.
Connecting the headset (optional)
You can connect a headset to the IP Deskphone as described in the following procedure:
1.
Plug the headset cord into the headset jack on the back of the IP
Deskphone as shown in Figure 3 on page 38 .
2.
Thread the cord through the channel in the side of the foot stand (if installed).
3.
Set up the headset according to the headset instructions.
39
Using your Avaya 1200 Series IP Deskphone
Connecting AC power (optional)
Your Avaya 1200 Series IP Deskphone supports AC power and Power over Ethernet (PoE). For AC power, use only the Avaya-approved Global
Power Supply (N0146475) and the country-specific IEC cable that you can order separately. To use PoE, your connected LAN must support
PoE.
1.
Connect the DC barrel connector to the power jack on the back of the
IP Deskphone.
2.
Thread the cable through the channel in the foot stand (if installed) to secure the cable.
3.
Plug the country-specific IEC cable into the Global Power Supply, and then plug the Global Power Supply into the nearest AC power outlet.
Connecting the LAN Ethernet cable
Connect your Avaya 1200 Series IP Deskphone to your LAN using a
CAT5e Ethernet cable to enable full functionality of your IP Deskphone. If your Ethernet port is equipped with Power over Ethernet (PoE), your IP
Deskphone can be powered through the LAN port. Do not extend the LAN
Ethernet cable outside the building.
1.
Plug one end of the supplied LAN Ethernet cable into the LAN
Ethernet port on the back of your IP Deskphone as shown in Figure 3 on page 38 .
2.
Thread the cable through the channel in the foot stand (if installed).
3.
Connect the other end of the cable to your LAN Ethernet connection.
The LAN LED on the back of the IP Deskphone lights when a LAN connection is established.
Note: When your LAN cable gets unplugged on an active IP
Deskphone, your IP Deskphone LCD displays an alert message “LAN cable unplugged”.
40
Using your Avaya 1200 Series IP Deskphone
Connecting the PC Ethernet cable
Connect a CAT5e PC Ethernet cable between your Avaya 1200 Series IP
Deskphone and your computer to enable your computer to access the
LAN.
1.
Plug one end of the PC Ethernet cable (not supplied) into the PC
Ethernet port on the back of your IP Deskphone as shown in Figure 3 on page 38 .
2.
Thread the cable through the channel in the foot stand (if installed).
3.
Connect the other end of the cable to the LAN port on your PC.
Wall mounting (optional)
You can mount your Avaya 1200 Series IP Deskphone on a wall. Wallmount the IP Deskphone using the two keyholes on the back of the it. You do not need the foot stand for wall-mounted applications.
1.
Remove the foot stand, if already attached.
2.
Ensure all cables are properly routed and the IP Deskphone is functioning.
3.
Make small marks on the wall where you want to align each keyhole slot.
4.
Insert the screws (not provided) so that they protrude slightly from the wall.
5.
Align the keyholes on the back of the IP Deskphone with the screws in the wall.
6.
Slide the IP Deskphone onto the screws to secure it in position.
Entering text
You can use combinations of the letters and numbers on the dialpad of your IP Deskphone to enter SIP addresses, create Address Book entries, and to designate labels for programmable keys.
41
Using your Avaya 1200 Series IP Deskphone
To make a call, you can dial an alphanumeric SIP address; for example, [email protected] can enter and edit text on your IP Deskphone using the following methods:
Attention: Some service providers support only the use of a
Directory Number (DN) such as 555-5555 to initiate a call to another
IP Deskphone. Contact your system administrator or service provider to determine if alphanumeric dialing is supported. Alphanumeric dialing consists of string of text that contain letters and numbers that make up; for example, a SIP address.
Entering text using the IP Deskphone dialpad
For applications that offer text input, when you use the dialpad to enter text the system activates the abc/123 context-sensitive soft key.
You can toggle between numeric and alphabetic input as follows:
• When the context-sensitive soft key label is abc , you can enter alphabetic text.
• When the context-sensitive soft key label is 123 , you can enter numbers.
For example, if you want to enter the lower case letter a, press the abc/
123 context-sensitive soft key to toggle to alphabetic input. Then press the number 2 key once. If you want to enter the upper case letter C, press the number 2 key six times. You can cycle through the letters (and the numeral) by pressing the number button repeatedly.
To create names or words that contain two adjacent letters that appear on the same button, for example, the word press, you can do the following:
1.
To enter the first character, press the dialpad key 6 .
2.
Pause briefly.
3.
To enter the next letter, press the dialpad key 6 twice to cycle to the letter r.
When entering alphanumeric information, the 1 key on the dialpad represents the characters in Table 7 on page 43 . To enter a special character, press the dialpad number 1 to cycle through the characters
42
Using your Avaya 1200 Series IP Deskphone
Character
;
:
/
\
,
)
(
!
~
=
+
^
?
‘
&
-
_
.
@ until you reach the one you need. For example, to enter a question mark
(?), press the number 1 key eight times.
Table 7: Alphanumeric characters for dialpad key 1 (Part 1 of 2)
Name at period dash underscore ampersand apostrophe carat question mark exclamation point left parentheses right parentheses comma backslash forward slash colon semi-colon tilde equal plus
43
Using your Avaya 1200 Series IP Deskphone
Table 7: Alphanumeric characters for dialpad key 1 (Part 2 of 2)
Character
1
Name numeral 1
Note: No letters are associated with the 0 key.
44
Using your Avaya 1200 Series IP Deskphone
Configuring the dialpad to alphanumeric dialing
To eliminate the need to press the abc/123 context-sensitive soft key when you enter text, you can set the Avaya 1200 Series IP Deskphone dialpad default to alphabetic mode.
To set the dialpad to alphabetic mode as the default:
On
Prefs
1.
Press the Prefs context-sensitive soft key, and then select Misc Options .
Highlight Alpha Dialing, and then press the Change context-sensitive soft key.
or
Back
2.
Choose one of the following:
— Press the On context-sensitive soft key to turn on alphanumeric dialing.
— Press the Back context-sensitive soft key to keep existing configurations and return to the
Preferences menu.
To disable alphabetic mode and set numeric mode as the default:
Prefs
1.
Press the Prefs context-sensitive soft key, and then select Misc Options .
Highlight Alpha Dialing, and then press the Change context-sensitive soft key.
45
Using your Avaya 1200 Series IP Deskphone
Off or
Back
2.
Choose one of the following:
— Press the Off context-sensitive soft key to turn on alphanumeric dialing.
— Press the Back context-sensitive soft key to keep existing configurations and return to the
Preferences menu.
46
Accessing the Avaya 1200 Series IP Deskphone
Accessing the Avaya 1200 Series IP
Deskphone
You require a log on ID and a password to log on to a server with your IP
Deskphone.
Logging on
Whenever you log on to your IP Deskphone you must do the following:
• confirm your logon ID
• enter your password
• select the duration of this session
Admin password protection for login prompt appears when you power up the IP Deskphone or after you log off.
When you log on to your IP Deskphone you must confirm your logon ID, enter your password, and select the duration of this session. However, the first time you use your IP Deskphone, you need to complete some of the following procedures:
• “Automatic login” on page 48
• “Setting the domain” on page 48
• “Selecting a language” on page 50
• “Logging on to your IP Deskphone” on page 51
• “Configuring the duration of the login” on page 54
• “Selecting a location” on page 56
• “User Profile” on page 56
• “Confirmation logon screen” on page 57
Note: The system automatically logs you back on after a power outage or software upgrade. The system administrator configures this feature on a network-wide basis.
47
Accessing the Avaya 1200 Series IP Deskphone
Automatic login
Before you first receive your IP Deskphone, your system administrator can configure your IP Deskphone with your user logon and password. If this is the case, after you plug in the IP Deskphone you can use it without further configuration.
Note: If the IP Deskphone is configured with automatic logon, you can not use the log off function, and you need a password to access some features and functions. Contact your system administrator or service provider for further information.
Setting the domain
Before the log on process, if you need to change the domain or confirm that the domain you log on to is correct, press the Domain contextsensitive soft key from the logon prompt. The current domain appears on the IP Deskphone LCD screen. You can edit the domain that is listed or press the Domain context-sensitive soft key to access a list of available domains to which you can choose to connect.
Note 1: You must enter the admin password to edit domains.
Note 2: Check with your system administrator before editing or changing domains.
To change the domain:
Domain
1.
Press the Domain context-sensitive soft key to change the current domain.
Note: You must enter an admin password before you can edit the domain in which the IP Deskphone connects.
2.
Press the Up/Down navigation key to highlight the new domain you want to use.
48
Accessing the Avaya 1200 Series IP Deskphone
Select
Back
Done
3.
Choose one of the following:
— Press the Select context-sensitive soft key to change the domain to the highlighted domain from the list. The
IP Deskphone returns to the Current
Domain page, and the new domain appears.
— Press the Back context-sensitive soft key to keep existing configurations and return to the previous menu.
4.
Press the Done context-sensitive soft key to confirm the new domain and return to the User Login screen.
Password protection for domains
This feature supports admin password protection for editing of the domain and is not required for switching domains. If you log on using the administrator password, you can use the editing domain option for both the Current Domain state and Domain List state.
After you press back on the edit page or on the password prompt, the idle display appears. You must enter the admin password to reenter the editing domain.
Password check to switch domains
When no one is logged on, a domain soft key appears. When you press the domain soft key, the current domain page appears without a password query.
Password protection for editing domain
When you press Edit for a domain, the admin password prompt appears.
The editing domain page appears after you enter the correct admin password. If you do not enter the correct password, the message
“incorrect password” appears with a prompt to retry.
49
Accessing the Avaya 1200 Series IP Deskphone
Password request in server settings mode
When you edit the domain from the server settings under the Network menu, you are prompted to enter the admin password. After you enter the password, the Domain page appears. When you press the Edit contextsensitive soft key, there is no prompt for the admin password because you have already entered the admin password to load the Server Settings menu.
Selecting a language
Your Avaya 1200 Series IP Deskphone has the capacity to operate using other languages, such as French. The system administrator can provision the IP Deskphone with up to six languages. If the IP Deskphone is provisioned with other languages, you can choose an available language during the login process by pressing the Lang context-sensitive soft key on the User Login page.
To change the language:
Change
Back
1.
Choose one of the following:
— Press the Change context-sensitive soft key to change the current language.
— Press the Back context-sensitive soft key to keep existing language and return to the User Login screen.
2.
Press the Up/Down navigation key to highlight the new language you want to use.
50
Accessing the Avaya 1200 Series IP Deskphone
Select
Back
3.
Choose one of the following:
— Press the Select context-sensitive soft key to change the language to the highlighted language from the list. The IP Deskphone returns to the
User Login screen and uses the selected language.
— Press the Back context-sensitive soft key to keep the existing language and return to the User
Login screen.
Logging on to your IP Deskphone
You need to log on to your IP Deskphone when you first install and restart your IP Deskphone and anytime you log off or reboot.
Note 1: When you log on to the Avaya 1200 Series IP Deskphone for the first time, the system prompts you for a location. For more information, see “Selecting a location” on page 56 .
Note 2: The IP Deskphone retains the previous user logon ID, which appears after the ID prompt whenever the IP Deskphone reboots.
To logon to the IP Deskphone : abc 1.
Press the abc/123 context-sensitive soft key to toggle between alphabetic or numeric input.
2.
Use the dialpad to enter your user ID login at the prompt.
Note: Use the left navigation key to backspace and remove a previous user
ID.
51
Accessing the Avaya 1200 Series IP Deskphone
Login 3.
Press the Login context-sensitive soft key.
If Authentication is enabled by your system administration, you are presented with the Authentication ID screen. The authentication ID is autofilled with your user ID.
If Authentication is not enabled, a new screen appears and prompts you for your password.
a. Press the abc/123 context-sensitive soft key to toggle between alphanumeric or numeric input. b. Use the dialpad to enter your authentication ID login at the prompt.
c. Press the Login context-sensitive soft key.
A new screen appears and prompts you for your user password.
4.
Enter your password by using the dialpad.
Note 1: When you enter your password, the last character entered appears.
However, all previous characters are hidden.
Note 2: When you enter your password and you use the navigation key to backspace, you erase all the characters and must completely reenter your password again.
52
Next
Cancel
Accessing the Avaya 1200 Series IP Deskphone
5.
Press the Next context-sensitive soft key.
Note: You can cancel the login process by pressing one of the following keys:
— Cancel context-sensitive soft key
— Goodbye fixed key
— Quit fixed keys
53
Accessing the Avaya 1200 Series IP Deskphone
Configuring the duration of the login
After you enter your logon ID and password the Duration screen appears. You can enter the maximum length of time of the session. If you choose to use the default duration Permanent, you remain logged on to the IP Deskphone until you log off.
To configure the login duration:
Next
Timed
1.
Choose one of the following:
— Press the Next context-sensitive soft key to set the logon duration to
Permanent. A login confirmation screen appears.
— Press the Timed context-sensitive soft key to open a screen to set a maximum time to remain logged in.
Note: If you press the Timed contextsensitive soft key, you must then set the duration of the login.
Period 2.
Press the Period context-sensitive soft key to toggle the logon duration entries between hours or days.
3.
Do one of the following:
— Use the dialpad to enter the number of hours or days you want to remain logged on and press the Next context-sensitive soft key.
Next
54
Back
Cancel
Accessing the Avaya 1200 Series IP Deskphone
— Press the Back context-sensitive soft key to return to the permanent logon screen.
— Press the Cancel context-sensitive soft key to return to the first logon screen.
Timed logoff
When you determine a logon time other than permanent, the IP
Deskphone reminds you of your expiry time.
Timed logoff while the IP Deskphone is idle
When the login time expires and the IP Deskphone is idle (not on a call), you can do one of the following at the prompt:
• Press the Yes context-sensitive soft key to log off immediately.
• Press the No context-sensitive soft key to switch to Permanent logon.
• Press the Quit or Release/Goodbye key to logout immediately.
If you do not respond, the prompt times out in 45 seconds and the IP
Deskphone logs off.
If you answer a call during the logout prompt, the logon switches to permanent login.
Timed logoff while on a call
When the login time expires while you are on a call, you can do one of the following at the prompt:
• Press the Yes context-sensitive soft key to log off immediately.
• Press the No context-sensitive soft key to switch to Permanent logon.
• Press the Quit key to dismiss the log out prompt and switch to permanent login.
55
Accessing the Avaya 1200 Series IP Deskphone
• Press the Release/Goodbye key to dismiss the logout prompt and switch to permanent login.
Note: If you press the Release/Goodbye key to dismiss the logout prompt, you also terminate the call.
If you do not respond, the prompt times out in 45 seconds and the IP
Deskphone switches to permanent login.
Selecting a location
When you first login to the IP Deskphone, the system prompts you for a location. The location you select is saved in your User Profile.
Depending on your service provider, the Enhanced Emergency Service uses the location you select or the Directory Number (DN) on the call server, when handling emergency calls. The configuration of the call server determines how emergency service calls are handled by your IP
Deskphone.
Note 1: During an emergency call, you cannot log out from the IP
Deskphone or release or disconnect the call. The IP Deskphone remains connected to the emergency service until the emergency service operator disconnects it.
Note 2: If the login time expires during an emergency call, a prompt does not appears and the IP Deskphone automatically switches to permanent login.
Note 3: When you set your user profile for the first time, you must confirm that the selected location is correct. You can view your location by accessing the IP Deskphone information screen. For more information, see “Viewing the IP Deskphone information” on page 140 .)
User Profile
Your User Profile contains your specific settings and data. You are prompted to create a User Profile the first time you log on to your IP
Deskphone. If you delete your User Profile, the IP Deskphone reboots, and you must log on and create a new User Profile. When you log on to
56
Accessing the Avaya 1200 Series IP Deskphone your IP Deskphone, your specific settings and data are automatically available for you.
The information stored in your user profile includes:
• Independent volume adjustments for handset, headset, and handsfree
• Alerting Volume adjustment
• Idle Screen display text
• Display Contrast and Backlight Screen Saver settings
• Voice Mail settings (number and mailbox ID)
• User location (from a server-provided list)
• Time, Date, and Zone format settings
• Default dialing (alpha/numeric)
• Call Ignore action (local/network)
• Search method (Name, First character, Index)
• Dialing pattern default (alpha/numeric)
• Address Book entries
• Call Inbox entries
• Programmable keys configuration
Confirmation logon screen
When you complete the logon process, the logon confirmation screen appears. Press the OK context-sensitive soft key to complete the logon process.
If the login is unsuccessful, a login error message Failed to login user, Authentication required appears. Press the OK contextsensitive soft key to return to the first logon screen. The most common cause for logon failure is the incorrect entry of your password.
Note: In case of login failures, the IP Deskphone displays the message “Failed to login user” and then automatically returns to the login screen.
57
Accessing the Avaya 1200 Series IP Deskphone
Logging off from the Avaya 1200 Series IP Deskphone
To log off from the IP Deskphone:
1.
Press the Services fixed key, and then select Logout from the menu.
abc
2.
Press the abc/123 context-sensitive soft key to toggle between alphabetic or numeric input.
3.
Use the dialpad to enter your password at the prompt.
Making an emergency call
You can use the Avaya 1200 Series IP Deskphone to make an emergency call to the Public Safety Answering Point (PSAP) from any accessible screen without logging on.
When you pick up the handset, press the handsfree button or headset button without logging on, a message “Emergency calls only” appears,
58
Logout or
Back
4.
Choose one of the following:
— Press the Logout context-sensitive soft key to complete the logout process. The IP Deskphone returns to the User Login screen.
— Press the Back context-sensitive soft key to remain logged on and return to the Services menu.
Accessing the Avaya 1200 Series IP Deskphone and the IP Deskphone can only be used to make an emergency call. All context-sensitive soft keys and feature keys are blank and unusable except for the second context-sensitive soft key which allows you to switch between numeric and alphabetic characters.
Note: When the IP Deskphone is waiting for the user to log on or it is blocked by a screen saver, you can still make an emergency call. If you pick up the handset, a message "Emergency calls only" appears and the IP Deskphone can be used for making only emergency calls.
To make an emergency call:
1.
Choose one of the following:
— Pick up the handset.
— Press the handsfree button.
— Press the headset button.
Note: Hang up or switch off the handset to return to normal state.
Send
2.
Dial the emergency number that is provided by your dialing plan.
3.
Press the Send context-sensitive soft key.
Note: If you try to dial the number that does not match the dialing plan, a message appears to inform you that the number is incorrect.
59
Configuring Avaya 1200 Series IP Deskphones
Configuring Avaya 1200 Series IP
Deskphones
You can adjust a few settings of the Avaya 1200 Series IP Deskphone to conform to the environment where you want to use the phone. These settings are saved to your User Profile. This chapter describes some of the settings that you can customize on your IP Deskphone.
• “Adjusting the display screen contrast” on page 60
• “Creating the idle screen text display” on page 61
• “Configuring Menu auto back-out” on page 62
• “Adjusting the volume” on page 64
• “Selecting a language” on page 68
• “Selecting the date and time format” on page 69
Adjusting the display screen contrast
Note: Adjusting the display screen contrast of the IP Deskphone also adjusts the Expansion Module contrast, if you have an Expansion
Module connected to your IP Deskphone.
To adjust the display screen contrast:
Prefs
1.
Press the Prefs context-sensitive soft key, select Display , Display Settings and then select Contrast .
2.
Press the Left/Right navigation key to increase or decrease the display contrast level.
60
Configuring Avaya 1200 Series IP Deskphones
Apply or
Cancel
3.
Choose one of the following:
— Press the Apply context-sensitive soft key to save the changes and return to the Display menu.
— Press the Cancel context-sensitive soft key to keep the existing configurations and return to the
Display menu.
Creating the idle screen text display
You can create a text to display on the screen, while the IP Deskphone is idle.
To create the idle screen display text:
Prefs abc
1.
Press the Prefs context-sensitive soft key, select Display , and select Idle
Screen Text Display .
2.
Press the abc/123 context-sensitive soft key to toggle between alphabetic or numeric input.
3.
Use the dialpad to enter the display text you want to appear on the idle screen display of the IP Deskphone.
61
Configuring Avaya 1200 Series IP Deskphones
Save or
Back
4.
Choose one of the following:
— Press the Save context-sensitive soft key to save the idle screen text display.
— Press the Back context-sensitive soft key to keep the existing screen display text and return to the
Display menu.
Configuring Menu auto back-out
You can use the Menu Auto back-out feature to configure the time interval required for the IP Deskphone to go back to the idle screen when the IP
Deskphone is left inactive.
To configure Menu Auto back-out:
Prefs
1.
Press the Prefs context-sensitive soft key, choose Display , and then Menu
Auto back-out .
Select or
Back
2.
Choose one of the following:
— Press the Select context-sensitive soft key.
— Press the Back context-sensitive soft key to return to the previous menu.
62
Configuring Avaya 1200 Series IP Deskphones
3.
Press the Up/Down navigation key to scroll through the screen and choose the required time interval.
Choose one of the following values:
— Never
— 10 min
— 5 min
— 2 min
— 1 min
— 30 sec
— 15 sec
Note: The Never option turns off Menu
Auto back-out.
Select or
Back
4.
Choose one of the following:
— Press the Select context-sensitive soft key to configure the Auto backout time to the selected (highlighted) value and return to the Display menu.
— Press the Back context-sensitive soft key to dismiss the Auto back-out time menu and return to the Display menu.
Note: When you enter the Auto back-out menu, the current configuration for the Menu Auto back-out time is pre-selected
(highlighted) on the list.
When you press the Select context-sensitive soft key, the time interval is flagged to commit to the configured preferences (done after the idle screen is displayed), and is used for menu auto back-outs from that point forward.
63
Configuring Avaya 1200 Series IP Deskphones
Selecting a ring pattern
You can use the ring pattern feature to select the ring pattern for an incoming call.
To select the ring pattern for an incoming call:
Prefs
Select
Test
Back
1.
Press the Prefs context-sensitive soft key, select Audio , select Tones , and then select Ring Pattern .
2.
Press the Up/Down navigation key to scroll through and highlight the different ring patterns displayed on the LCD screen.
3.
Choose one of the following:
— Press the Select context-sensitive soft key to set the ring pattern and return to the Tones menu.
— Press the Test context-sensitive soft key to briefly play the selected ring pattern.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the previous menu.
Adjusting the volume
You can adjust the volume of the IP Deskphone for the following:
• Ring Volume
• Handset Volume
• Headset Volume
64
Configuring Avaya 1200 Series IP Deskphones
• Handsfree Volume
A sliding scale appears on the LCD screen display when you adjust the volume. Adjusting the ring volume
You can adjust the ring volume for an incoming call.
To adjust the ring volume for an incoming call:
Prefs
1.
Press the Prefs context-sensitive soft key, select Audio , select Tones , and then select Alerting Volume .
2.
To adjust the ring volume of an incoming call do one of the following:
— Press the Left/Right navigation key.
— Press the Volume fixed keys to increase or decrease the volume.
Set or
Back
3.
Choose one of the following:
— Press the Set context-sensitive soft key to set the selected volume and return to the Tones menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Tones menu.
65
Configuring Avaya 1200 Series IP Deskphones
Adjusting the volume of the Handset, Headset, and Handsfree mode
You can adjust the volume for the handset, headset, and the handsfree speaker of the IP Deskphone.
To adjust the volume of the handset:
Prefs
1.
Press the Prefs context-sensitive soft key, select Audio , select Voice , and then select Handset .
Set
2.
To adjust the handset volume use one of the following methods:
— Press the Left/Right navigation key to increase or decrease the volume of the handset.
— Press the Volume + fixed key to increase the handset volume or press the Volume fixed key to decrease the handset volume.
Note: To adjust the volume during a call, use only the Volume + and
Volume fixed keys.
or
Back
3.
Choose one of the following:
— Press the Set context-sensitive soft key to set the selected volume and return to the Voice menu.
— Press the Back context-sensitive soft key to keep existing configurations and return to the
Voice menu.
You can adjust the headset volume on the IP Deskphone.
66
Configuring Avaya 1200 Series IP Deskphones
To adjust the headset volume:
Prefs
1.
Press the Prefs context-sensitive soft key, select Audio , select Voice , and then select Headset .
Set
2.
To adjust the handset volume use one of the following methods:
— Press the Left/Right navigation key to increase or decrease the volume of the handset.
— Press the Volume + fixed key to increase the handset volume or press the Volume fixed key to decrease the handset volume.
Note: To adjust the volume during a call, use only the Volume + and
Volume fixed keys. or
Back
3.
Choose one of the following:
— Press the Set context-sensitive soft key to set the selected volume and return to the Voice menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Voice menu.
You can adjust the handsfree mode volume on the IP Deskphone.
67
Configuring Avaya 1200 Series IP Deskphones
To adjust the handsfree mode volume:
Prefs
1.
Press the Prefs context-sensitive soft key, select Audio , select Voice , and then select Handsfree .
Set
2.
To adjust the handsfree volume use one of the following methods:
— Press the Left/Right navigation key to increase or decrease the volume of the handset.
— Press the Volume + fixed key to increase the handset volume or press the Volume fixed key to decrease the handset volume.
Note: To adjust the volume during a call, use only the Volume + and
Volume fixed keys.
or
Back
3.
Choose one of the following:
— Press the Set context-sensitive soft key to set the selected volume and return to the Voice menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Voice menu.
Selecting a language
The display is available in multiple languages. A maximum of six languages are accessible through the IP Deskphone. The system administrator determines which languages are available for your IP
Deskphone.
68
Configuring Avaya 1200 Series IP Deskphones
To select a language:
Prefs
Change
1.
Press the Prefs context-sensitive soft key, and then select Language . The current language displays.
2.
Press the Change context-sensitive soft key to change the language.
3.
Press the Up/Down navigation key to scroll and highlight the desired language
(for example, German [Deutsche]).
Select or
Back
4.
Choose one of the following:
— Press the Select context-sensitive soft key to save the desired language and return to the previous screen.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Preferences menu.
Selecting the date and time format
Several date and time formats are available. Formats are based on the
12-hour and 24-hour clocks.
69
Configuring Avaya 1200 Series IP Deskphones
To select a date format:
Prefs
1.
Press the Prefs context-sensitive soft key, select Misc Options , and then select Time .
Change
2.
Press the Change context-sensitive soft key.
3.
Press the Up/Down navigation key to highlight Date Format in the menu.
Change
4.
Press the Change context-sensitive soft key to change the Date Format.
5.
Press the Up/Down navigation key to scroll and highlight either a month/day
(MM/DD) or a day/month (DD/MM) format.
Select or
Back
6.
Choose one of the following:
— Press the Select context-sensitive soft key to save the format and return to the Time Format menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Time Format menu.
You can select a time zone for your IP Deskphone.
70
Configuring Avaya 1200 Series IP Deskphones
To select a time zone:
Prefs
1.
Press the Prefs context-sensitive soft key, select Misc Options , and then select Time .
Change
2.
Press the Change context-sensitive soft key.
3.
Press the Up/Down navigation key to highlight Timezone in the menu.
Change
4.
Press the Change context-sensitive soft key to change the Date Format.
5.
Press the Up/Down navigation key to scroll through and highlight the time zones.
Note: Time zones are listed based on
GMT format, for example:
— GMT -11:00 Samoa
— GMT -10:00 Hawaii
71
Configuring Avaya 1200 Series IP Deskphones
Select or
Back
6.
Choose one of the following:
— Press the Select context-sensitive soft key to save the time zone selection and return to the Time
Format menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Time Format menu.
You can select the time zone format for your IP Deskphone.
To select a time format:
Prefs
1.
Press the Prefs context-sensitive soft key, select Misc Options , and then select Time .
Change
2.
Press the Change context-sensitive soft key.
3.
Press the Up/Down navigation key to highlight Time Format in the menu.
Change
4.
Press the Change context-sensitive soft key change the date format.
72
Configuring Avaya 1200 Series IP Deskphones
5.
Press the Up/Down navigation key to scroll and highlight a time format:
— 12-hour
— 24-hour
— French
Select or
Back
6.
Choose one of the following:
— Press the Select context-sensitive soft key to save the time format and return to the Time Format menu.
— Press the Back context-sensitive soft key to keep the existing configurations and return to the
Time Format menu.
73
Making a call
Making a call
This section describes the methods you can use to make a call. You can make a call from your Avaya 1200 Series IP Deskphone using one of the following:
• “Making a call using off-hook dialing” on page 75
• “Making a call using on-hook dialing” on page 77
• “Making a call using redial” on page 79
• “Making an intercom call” on page 80
• “Making paging calls” on page 81
You can also initiate a call while using one of the following features:
• “The Address Book” on page 92
• “Call Inbox” on page 106
When an outgoing call fails to connect to the destination, one of the following messages appears:
• Declined, Temporarily unavailable
• Declined, Cannot find user
• Declined, User has declined call
74
Making a call
Making a call using off-hook dialing
To make a call using off-hook dialing:
1.
Make a call by using one of the following off-hook dialing methods:
— Press the Line feature key
— Lift the handset
— Press the Headset fixed key
— Press the Handsfree fixed key
The IP Deskphone produces a dial tone.
abc
2.
You can make a call using one of the following methods:
— Enter the phone number or SIP address by using the dialpad.
Note: The abc/123 context-sensitive soft key toggles between alphabetic and numeric input.
75
Making a call
Redial
Msgs
Send
— Press the Redial context-sensitive soft key to dial the last dialed number.
Note: The Redial context-sensitive soft key only appears if a number or address was previously entered.
— Press the Msgs context-sensitive soft key and select Voice Mail from the Messages menu to access your voice mail.
— Press the Speed dial feature key that you programed to call with a commonly used or important phone number or SIP address.
3.
Press the Send context-sensitive soft key to immediately initiate the call.
Note: The IP Deskphone automatically initiates a call shortly after you enter the
SIP address or phone number.
76
Making a call
Making a call using on-hook dialing
You can make a call by using on-hook dialing. Enter the SIP address or the phone number before going off-hook.
Note: When you use this method, you cannot toggle between alphabetic or numeric input.
To make a call using on-hook dialing:
1.
Dial the number or SIP address.
Chad
2.
Continue the call by using one of the following methods:
— Press the line feature key.
— Press the Headset fixed key.
— Press the Handsfree fixed key.
3.
To terminate the call, choose one of the following:
— Replace the handset into the cradle.
— Press the Goodbye key.
Using handsfree calling
While on an active call, you can switch between the handset and handsfree mode.
77
Making a call
To end a handsfree call:
Press the Goodbye key
To mute a handsfree call:
1.
Press the Mute key.
The LED indicator lights.
2.
Press the Mute key again to return to a two-way handsfree conversation.
To switch from the handsfree to handset mode:
Lift the handset.
To switch from the handset mode to handsfree mode:
1.
Press the Handsfree key.
The LED indicator lights with a solid red light.
2.
Replace the handset.
78
Making a call
To use a headset:
1.
Connect the headset to the headset jack or the handset jack.
2.
Press the Headset key.
The LED indicator lights.
3.
Press the Goodbye key or press the button on the wireless headset, if equipped, to release a call.
To switch from handsfree to headset:
1.
Press the Headset key.
The LED indicator lights.
Making a call using redial
Automatically redial the last telephone number that you dialed.
To make a call using redial:
1.
Redial the last number called by using one of the following methods:
79
Making a call
Redial
OR
Feature
— Press the Redial sofkey to immediately initiate the call.
Note: The Redial context-sensitive soft key only appears if a number or address was previously entered.
— Press the Feature soft key.
— Press the 5 on the key pad.
Enter — Press the Enter key, located in the center of the navigation key, to initiate the call.
Making an intercom call
To make a call using the intercom:
Feature 1.
Press the Feature soft key.
2.
Enter 66 on the keypad.
80
Enter
Making a call
3.
Press the Enter key, located in the center of the navigation key.
The deskphone displays the following prompt: Voice/AutoIC:>
4.
Enter the number you wish to call.
Done
5.
Press the Done soft key.
Making paging calls
To make a call using paging:
Feature
1.
Press the Feature soft key.
2.
Enter 60 on the keypad.
Enter
3.
Press the Enter key, located in the center of the navigation key.
The deskphone displays the following prompt: GrpPg:>
81
Making a call
4.
Enter the number (or group number) that you wish to page.
Done
5.
Press the Done soft key.
82
Receiving a call
Receiving a call
When you receive a call, you are typically notified by the alerting ring, and the incoming caller identification appears on the LCD screen.
Caller identification
When you receive an incoming SIP call, the Caller ID information appears on the LCD screen. When you receive a call from a contact that is entered in the IP Deskphone Address Book, the caller information appears as it is in the Address Book.
You can restrict the information displayed for incoming calls or for calls you make. For more information, see “Configuring Privacy settings” on page 136 .
This chapter contains information about the following topics:
• “Answering an incoming call” on page 83 .
• “Ignoring an incoming call” on page 84 .
• “Configuring Do Not Disturb” on page 85
• “Receiving intercom calls” on page 87 .
• “Receiving paging calls” on page 87 .
• “Receiving calls to a pickup group” on page 88
• “Receiving voice mail” on page 89
• “Forwarding calls to another number” on page 90
Answering an incoming call
When you can answer an incoming call, you can choose one of four methods.
83
Receiving a call
To answer an incoming call:
Answer
1.
Choose one of the following:
— Press the Answer context-sensitive soft key that activates a Handsfree call.
— Lift the handset.
— Press the Headset fixed key.
— Press the Handsfree fixed key.
Ignoring an incoming call
You can terminate an incoming call alert without answering the call or sending a Decline Call reason by pressing the Ignore context-sensitive soft key or by pressing the Goodbye fixed key. The caller continues to hear the ringing tone but is unaware that you are ignoring the call.
You can set the Call Ignore feature to either Local or Network. When Call
Ignore is set to Local, only that IP Deskphone is affected, and it stops ringing when you press the Ignore context-sensitive soft key. When Call
Ignore is set to Network and you press the Ignore context-sensitive soft key, the IP Deskphone stops ringing, and a message is sent to the network indicating that you are busy at all SIP IP Deskphones you are logged on to, and that server should stop trying to contact you.
To set the Ignore feature to Local or Network press the Prefs context- sensitive soft key, select Feature Options , and then select Call Ignore
Action from the menu. Press the Change context-sensitive key to change the Call Ignore setting to either Call Ignore: Local, or Call Ignore:
Network.
Note: When you are on active call and you receive an incoming call, do not press the Goodbye fixed key to ignore an incoming call. If you press the Goodbye fixed key, the current call disconnects. Press the
Ignore context-sensitive soft key to ignore the incoming call.
84
Receiving a call
To ignore an incoming call:
Prefs
Change
Ignore
1.
Press the Prefs context-sensitive soft key, select Feature Options , and then select Call Ignore Action from the menu.
2.
Press the Change context-sensitive key to change the Call Ignore setting to either Call Ignore: Local or Call Ignore:
Network
3.
To terminate an incoming call alert and ignore the incoming call, do one of the following:
— Press the Ignore context-sensitive soft key to terminate an incoming call.
— Press the Goodbye fixed key when you are not on an active call.
Configuring Do Not Disturb
You can use the Do Not Disturb feature to prevent incoming calls.
To prevent an incoming call:
Feature 1.
Press the Feature soft key.
85
Receiving a call
2.
Press 85 on the key pad.
3.
Press the Enter key, located in the center of the navigation key.
The screen displays Do Not Disturb to indicate that the feature is activated.
To cancel Do Not Disturb:
Feature 1.
Press the Feature soft key.
2.
Press #85 on the key pad.
3.
Press the Enter key, located in the center of the navigation key.
The screen displays Allow Calls to confirm that incoming calls will not be blocked.
86
Receiving a call
Receiving intercom calls
Your IP Deskphone can be part of an intercom group. After you receive a call from the intercom group, the following occurs:
• You receive a call notification and the IP Deskphone rings; the display is similar to the display of a normal call.
• The IP Deskphone auto-answers the intercom call on handsfree after the configured number of seconds pass by.
• The IP Deskphone auto-answers only if you do not answer the call within the configured time limit.
• If you are on an active call, the IP Deskphone does not auto-answer the incoming intercom call.
Receiving paging calls
Your IP Deskphone can be part of a paging group. After you receive a call from the paging group, the following happens:
• The display on the screen includes a <<Paging>> tag, the From header, and optional subject.
• The IP Deskphone establishes a one-way speech path between the
IP Deskphone and the caller; that is, you can only hear the call, you cannot respond.
• The IP Deskphone does not display context-sensitive soft keys.
• The IP Deskphone blocks all key events, such as line keys and digit keys, except for the Volume up and down keys, the Mute on and off key, and the Release key (Goodbye key).
• If you are on an active call, the IP Deskphone does not auto-answer the page call.
• While the page call is active, Do Not Disturb (DND) is enabled on the
IP Deskphone; the IP Deskphone does not accept other incoming calls until the page call ends.
• If you are in the process of making an outgoing call and a page call comes in, the IP Deskphone ends the outgoing call and auto-answers the page call.
87
Receiving a call
Receiving calls to a pickup group
Your IP Deskphone can be part of a pickup group. In a pickup group, each member can answer another member’s calls. You can also pickup group calls at an extension number that is not assigned to the group.
Pickup groups are assigned by your system administrator.
To receive a call to a pickup group:
Feature 1.
Press the Feature soft key,
2.
Enter 75 on keypad.
3.
Press the Enter key, located in the center of the navigation key.
To receive a pickup group call at another extension:
Feature 1.
Press the Feature soft key.
2.
Enter 76 on keypad.
88
Receiving a call
3.
Press the Enter key, located in the center of the navigation key.
The IP deskphone displays the following prompt: DpkUp>.
4.
Enter the number of the phone from which you wish to pickup the call.
Done
5.
Press the Done soft key.
Receiving voice mail
To retrieve voice mail messages:
Msgs
1.
Choose one of the following methods:
— Press the Msgs soft key.
The IP deskphone immediately connects to your voice mail inbox.
OR
Feature — Press the Feature soft key.
— Enter 981 on the key pad.
89
Receiving a call
— Press the Enter key, located in the center of the navigation key.
Forwarding calls to another number
You can send your calls to another telephone in your system.
To activate call forwarding:
Feature
1.
Press the Feature soft key.
2.
Enter 4 on the keypad.
Enable
Edit
3.
Press the Enter key, located in the center of the navigation key.
4.
Press the Enable soft key. The screen displays Forward to:<None>
To activate the call forwarding always set the call forward number.
5.
Press the Edit soft key. The screen displays Forward to:>_
90
Save
Cancel
Receiving a call
6.
Enter the number that you want to forward the calls to.
— To save the call forward number that you set press the Save soft key. The screen displays Forward> and the number to which calls will be forwarded.
— To exit the edit mode press the
Cancel soft key.
Note: To exit the call forwarding feature without updating the changes press Quit soft key.
To cancel call forwarding:
Feature
1.
Press the Feature soft key.
2.
Enter 4 on the keypad.
Disable
3.
To disable the call forwarding feature press the Disable soft key.
The screen displays Cancel Forward .
Note: If the IP Deskphone is ringing or is in Do Not Disturb mode, you cannot forward the call.
91
The Address Book
The Address Book
The Address Book is a personal directory of contacts from which you can make a phone call.You can access the Address Book while on a call and start a new call from the highlighted contact. You can use the Address
Book for the following:
• “Viewing the Address Book” on page 92
• “Initiating a call from the Address Book” on page 92
• “Adding a contact to your Address Book” on page 94
• “Editing a contact in your Address Book” on page 95
• “Copying information to the Address Book” on page 99
• “Searching for a contact in the Address Book” on page 101
Viewing the Address Book
To access the Address Book, press the Directory fixed key or press the
View context-sensitive soft key, and then select Address Book from the menu. See Figure on page 92 .
To view information about a contact use the navigation button to highlight a name, and then press the View context-sensitive soft key. The name,
SIP address, and designation of contact or not as Friend appears.
When you view the details of a contact, you can:
• Edit the contact information. For more information, see “Editing a contact in your Address Book” on page 95 .
Initiating a call from the Address Book
You can initiate a call directly from your IP Deskphone Address Book.
Note: If your service provider requires that a Directory Number (DN) be used to initiate a call, the Address Book entry must have the DN to initiate a call.
92
The Address Book
First, go off-hook by using one of the methods described in the section
“Making a call using off-hook dialing” on page 75 .
You can also access the Address Book while on an active call and initiate a new call. The IP Deskphone automatically places the active call on hold when you initiate a new call.
To initiate a call to a contact stored in the Address Book:
1.
Press the Directory fixed key to select a contact from the Address Book to call.
2.
Press the Up/Down navigation key to highlight a contact on the list.
View
3.
Press the View context-sensitive soft key to make a call to the contact.
Call or
Back
4.
Choose one of the following:
— Press the Call context-sensitive soft key to make a call to the contact.
— Press the Back context-sensitive soft key to return to the off-hook screen.
93
The Address Book
Adding a contact to your Address Book
You can add a new contacts to the Address Book of the IP Deskphone.
To add a contact to your Address Book:
Add abc
Next
Back
1.
Choose one of the following:
— Press the Directory fixed key.
— Press the Add context-sensitive soft key, select Address Book from the menu, and then press the New context-sensitive soft key.
2.
Press the abc/123 context-sensitive soft key to toggle between alphabetic and numeric characters.
3.
Choose one of the following:
— Use the dialpad to enter a name for the new contact and press the Next context-sensitive soft key to continue.
— Press the Back context-sensitive soft key to return to the previous menu.
4.
Use the dialpad to enter a phone number or SIP address (URI) for the new contact.
94
The Address Book
Yes
No
Back
Ok
5.
Do one of the following to complete the entry:
— Press the Yes context-sensitive soft key to add the contact to a group and then select the group for the contact to be added.
— Press the No context-sensitive soft key if you do not want the contact to a group, and return to the address menu screen.
— Press the Back context-sensitive soft key to return to the previous menu.
6.
Press the Ok context-sensitive soft key to complete the entry and return to the
Address Book menu.
Editing a contact in your Address Book
You can edit a contact in your Address Book.
To edit a contact in your Address Book:
1.
Press the Directory fixed key.
95
The Address Book
View
Edit abc
Next
Back
2.
Press the Up/Down navigation key to highlight the contact you want to edit, and then press the View contextsensitive soft key.
3.
Press the Edit context-sensitive soft key to edit the contact information.
4.
Press the abc/123 context-sensitive soft key to toggle between alphabetic and numeric characters.
5.
Use the dialpad to enter the new name for the contact.
6.
Choose one of the following:
— Press the Next context-sensitive soft key to continue.
— Press the Back context-sensitive soft key to return to the previous menu.
Note: If you only need to change the SIP address or phone number for the contact, press the Next context-sensitive soft key without making changes to the name.
96
Next
Back
Yes
No
Back
The Address Book
7.
Use the dialpad to enter a new phone number or new SIP address (URI) for the contact.
8.
Choose one of the following:
— Press the Next context-sensitive soft key to continue.
— Press the Back context-sensitive soft key to return to the previous menu.
9.
Do one of the following to complete the entry:
— Press the Yes context-sensitive soft key to designate the contact as a friend and return to the address menu screen.
— Press the No context-sensitive soft key if you do not want a contact designated as a friend and return to the address menu screen.
Note: If the contact is already designated as a friend then the question
Remove from friends?
appears.
Press the Yes context-sensitive soft key to remove the contact from your friends list or press the No context-sensitive soft key to keep the contact on your friends list.
— Press the Back context-sensitive soft key to return to the previous menu.
97
The Address Book
Ok
10. Press the Ok context-sensitive soft key to complete the entry and return to the previous menu.
To delete a contact from your Address Book:
1.
Press the Up/Down navigation key to highlight the contact you want to delete and press the View context-sensitive soft key.
View
Edit
Delete
Ok
Back
Ok
2.
Press the Edit context-sensitive soft key to access the contact information.
3.
Press the Delete context-sensitive soft key to completely delete the contact from the Address Book.
4.
Choose one of the following:
— Press the Ok context-sensitive soft key to confirm.
— Press the Back context-sensitive soft key to return to the previous menu.
5.
Press the Ok context-sensitive soft key to complete the procedure and return to the Address Book.
98
The Address Book
Copying information to the Address Book
To copy information from the Call Inbox screen to the Address Book use the Copy fixed key.
To copy a contact to the Address Book:
Copy
1.
Press the Up/Down navigation key to highlight the contact in the Call Inbox that you want to add to your Address
Book and press the Copy fixed key.
A new screen appears offering the following destinations for the contact information:
— 1. Address Book
2.
Press the Up/Down navigation key to highlight the Address Book and press the Select context-sensitive soft key.
Select abc
3.
Press the abc context-sensitive soft key to toggle between alphanumeric and numeric characters.
4.
Use the dialpad to enter a name for the new entry.
99
The Address Book
Next
Back
5.
Choose one of the following:
— Press the Next context-sensitive soft key to continue.
— Press the Back context-sensitive soft key to return to the previous menu.
Note: If you do not need to change the name for the contact, press the Next context-sensitive soft key.
6.
Use the dialpad to enter a new phone number or new SIP address for the above contact.
Next
Back
7.
Choose one of the following:
— Press the Next context-sensitive soft key to continue.
— Press the Back context-sensitive soft key to return to the previous menu.
Note: If you do not need to change the name for the contact, press the Next context-sensitive soft key.
Yes
8.
Do one of the following to complete the entry:
— Press the Yes context-sensitive soft key to add the contact to a group and then select the group for the contact to be added.
100
No
Back
Yes
No
OK
The Address Book
— Press the No context-sensitive soft key if you do not want a contact designated as a friend and return to the address menu screen.
— Press the Back context-sensitive soft key to return to the previous menu.
9.
Choose one of the following:
— Press the Yes context-sensitive soft key to designate the contact as a friend.
— Press the No context-sensitive soft key if you do not want to designate the contact as a friend and return to the address menu screen.
10. Press the OK context-sensitive soft key to complete the entry and return to the previous menu.
Searching for a contact in the Address Book
When you access the IP Deskphone Address Book you can perform a search for a contact using one of the following methods:
• Index Search (performs a search based on the index number you enter)
• 1st Character Search (performs a search based on the first character you enter)
• Name Search (performs a search based on the name you enter)
101
The Address Book
To change the search method of the IP Deskphone:
Prefs
Change
Select
1.
Press the Prefs context-sensitive soft key, select Misc Options , and then highlight Search Method from the menu.
2.
Press the Change context-sensitive soft key.
3.
Press the Up/Down navigation key to highlight the Search Method you want to use as the default when you search for a contact:
— 1. Index Search
— 2. 1st Character Search
— 3. Name Search
4.
Press the Select context-sensitive soft key to select a search method, and then return to the previous menu.
Using the Search feature in the Address Book
To search for a contact while accessing your personal Address Book, use the dialpad to enter the search information. For example:
• Index Search—to search for a contact by using the Index Search method, enter the index number. When entering an index number larger than 9, you must enter the next digit quickly to move to that item on the list. For example, if the address you need is item 28 on the list, you must enter the digit 8 quickly after entering the digit 2.
• 1st Character Search—to search for a contact whose name begins with the letter d, using the dialpad, press the d (3) key on the dialpad.
The first entry in the Address Book that begins with the letter d appears.
102
The Address Book
• Name Search—to search for a specific name in your personal
Address Book, enter the name by using the dialpad.
Using the Search feature
You can search for a contact that is in your Avaya 1200 Series IP
Deskphone Address Book. You can save a contact name and SIP address found on the call server to your personal Address Book stored in your IP Deskphone.
Using Local Search
You can search for a contact that is stored in your Address Book.
To search for a contact stored in your Address Book:
1.
Press the Services fixed key, select
Search , and then select Local Search from the menu.
Select
2.
Press the Up/Down navigation key and then press the Select context-sensitive soft key to choose a search criteria:
— 1. User Name
— 2. Name
— 3. Phone Number abc
3.
Press the abc/123 context-sensitive soft key to toggle between alphabetic and numeric characters.
103
The Address Book
4.
Use the dialpad to enter the search information for the contact.
Search
Back
Call
Search
Exit
5.
Choose one of the following:
— Press the Search context-sensitive soft key.
— Press the Back context-sensitive soft key to return to the previous menu.
Note: When the search is unsuccessful, the following message appears:
No entries found for <search criteria>
6.
When a search result is successful, you can do one of the following:
— Press the Up/Down navigation key to highlight a contact, from the search result and press the Call context-sensitive soft key to initiate a call.
— Press the Search context-sensitive soft key to start a new search.
— Press the Exit context-sensitive soft key to return to the idle screen.
104
Search
Exit
The Address Book
7.
When a search result is not successful, you can do one of the following:
— Press the Search context-sensitive soft key to return to the search menu and begin a new search.
— Press the Exit context-sensitive soft key to return to the idle screen.
105
Call Inbox
Call Inbox
While your IP Deskphone is active, all incoming calls are saved in your
Call Inbox. You can view the following details about each call:
• Call status (Missed)
• Name of the caller
• SIP address
• Time of the call
• Number of consecutive calls each caller made to you
You can set the filter on your Call Inbox to display all incoming calls or missed calls. You can access your Call Inbox while the IP Deskphone is idle or while you are on a call.
Accessing the Call Inbox
You can access the Call Inbox and initiate a call when the IP Deskphone is:
• Idle. For more information, see “Managing calls in the Call Inbox while not on a call” on page 106 .
• Active. For more information, see “Accessing the calls in your Call
Inbox during a call” on page 115 .
Managing calls in the Call Inbox while not on a call
You can manage calls in the Call Inbox while you are not on a call.
To manage calls in the Call Inbox while not on a call:
1.
Press the Msg/Inbox fixed key.
106
Enter
Missed
All
Call Inbox
2.
Press the Up/Down navigation key to highlight a call from the list of calls in your Call Inbox.
Note: You can initiate a call to the highlighted caller. For more information, see “Initiating a call from the Call Inbox” on page 113 .
3.
Do one of the following:
— To place a call to the selected address using the primary login of the IP Deskphone, press the Enter key.
— To view the details of a highlighted call, press the Right navigation key.
See “Viewing the details of a call in the Call Inbox” on page 109 .
— To leave the detail view and return to the main inbox screen, press the
Left navigation key.
— Press the Missed context-sensitive soft key to toggle the view filter from the All context-sensitive soft key to the Missed context-sensitive soft key. See “Managing missed calls” on page 110 .
— The All context-sensitive soft key is displayed when the view mode is on
Missed , and displays all the calls in the Call Inbox.
107
Call Inbox
Delete
Exit
— Press the Delete context-sensitive soft key to delete the highlighted call or all calls in your Call Inbox. See
“Deleting calls in your Call Inbox” on page 114 .
— Press the Exit context-sensitive soft key to exit the Call Inbox.
Table 8 on page 108 provides a list of additional user interactions for the main inbox screen.
Table 8: Additional user interactions
Item Function
Use the Enter key to place a call to the selected address using the primary login of the IP Deskphone.
The Enter key has the same behavior as the Call context-sensitive soft key.
Use the Dial pad to select an item by index.
To place a call to the address of the selected call log entry from the primary logged in user of the IP Deskphone, do one of the following:
— Lift the handset.
— Press the Headset fixed key.
— Press the Handsfree fixed key.
108
Call Inbox
Table 8: Additional user interactions
Item Function
Press the Line key to place a call to the address of the selected call log entry from the user logged in on the selected line key.
Viewing the details of a call in the Call Inbox
To view details of a call in the Call Inbox:
1.
When you view the details of a call in the
Call Inbox, you can do the following:
— Initiate a call to the caller displayed on the screen. For more information, see “Initiating a call from the Call
Inbox” on page 113.
Call
Prev
Next
Back
— Press the Call context-sensitive soft key to place a call to the selected address using the primary login of the IP Deskphone.
— Press the Prev context-sensitive soft key to select and display he details of the previous entry in the call log.
— Press the Next context-sensitive soft key to select and display the details of the next entry in the call log.
— Press the Back context-sensitive soft key to leave the detail view and return to the main inbox screen.
109
Call Inbox
Managing missed calls
When you do not answer incoming calls, the number of new calls appears on the IP Deskphone LCD screen. For example, if you miss three calls the following message appears: 3 new calls .
Note: When you view a missed call in your Call Inbox, the new call message no longer appears on the LCD screen. The new calls are stored as missed calls.
To view missed calls:
Msgs 1.
Press the Msg/Inbox fixed keyand press the Missed context-sensitive soft key.
All
2.
Press the Up/Down navigation key to highlight a call from the list of missed calls.
3.
Press the Right context-sensitive soft key to view the details of the missed call.
Note: You manage the missed call the same as any call that is in your Call
Inbox. For more information, see
“Viewing the details of a call in the Call
Inbox” on page 109 and “Initiating a call from the Call Inbox” on page 113 .
4.
To view all the calls in the Call Inbox, press the All context-sensitive soft key.
110
Call Inbox
Delete
Exit
5.
To delete the highlighted missed call or all missed calls, press the Delete context-sensitive soft key. For more information, see “Deleting calls in your
Call Inbox” on page 114 .
Note: The IP Deskphone deletes only the missed calls from the Call Inbox.
6.
To exit the Inbox and return to the idle IP
Deskphone screen, press the Exit context-sensitive soft key.
Missed Calls Notification
You can change the call log behavior so that the message xx new calls is cleared by entering the Inbox without having to select each missed call.
Changing the Missed Calls Notification behavior:
Msgs 1.
Press the Msgs context-sensitive soft key.
2.
Press the Up/Down navigation key to highlight Missed Calls Notification .
111
Call Inbox
Select
Auto
Manual
3.
Choose one of the following:
— Press the Select context-sensitive soft key.
— Press the Back context-sensitive soft key to abort the changing of the configurations and return to the
Message Options screen.
If you press the Select context-sensitive soft key, one of the following messages appears (based on the current setting of the option):
— Press Manual to change
Missed Call Notification
Message clearing mode
— Press Auto to change
Missed Call Notification
Message clearing mode
4.
Choose one of the following:
— Press the Auto context-sensitive soft key to change the clearing mode for the xx new calls missed call message for the IP Deskphone.
Note: Auto means that the message is cleared from the idle screen as soon as you enter the Inbox.
— Press the Manual context-sensitive soft key to change the clearing mode for the xx new calls missed call message for the IP Deskphone.
Note: Manual means that the message is cleared from the idle screen only after you look at the call detail for every newly missed call in the Inbox.
112
Call Inbox
Initiating a call from the Call Inbox
When you receive a call that is missed or answered, the calling number is listed in the Inbox. You can select the number, and then dial from the
Inbox, or you can edit the number in the Inbox.
To initiate a call from the Call Inbox, press the Msg/Inbox fixed key and select Inbox from the menu.
Note 1: If your service provider requires that a Directory Number
(DN) be used to initiate a call, the Call Inbox entry must have the DN to initiate a call.
Note 2: While you are on a call, you can initiate a new call from the
Call Inbox. For more information, see “Accessing the calls in your Call
Inbox during a call” on page 115 .
To initiate a call from the Call Inbox:
1.
Press the Msg/Inbox fixed key.
2.
Press the Up/Down navigation key to highlight a call from the list of calls in your Call Inbox.
3.
To view details of the call, press the
Right navigation key.
113
Call Inbox
Edit
Call
4.
To place a call to the selected address, do one of the following:
— Lift the handset.
— Press the Headset fixed key.
— Press the Handsfree fixed key.
or
Press the Edit context-sensitive soft key
Then press the Send context-sensitive soft key.
Deleting calls in your Call Inbox
When you delete calls from the Call Inbox, both missed calls and answered calls are deleted. When you view the missed calls and select delete, only the missed calls are deleted.
To delete calls from your Call Inbox:
1.
Press the Up/Down navigation key to highlight a call from the list of calls in your Call Inbox.
Delete
2.
Press the Delete context-sensitive soft key.
114
Select
Back
Call Inbox
Yes
AllUsr
All
No
3.
Select one of the following contextsensitive soft keys:
— Press the Yes context-sensitive soft key to delete the highlighted call.
— Press the AllUsr context-sensitive soft key to delete all the calls from the selected caller.
— Press the All context-sensitive soft key to clear all calls from the Call
Inbox.
— Press the No context-sensitive soft key to return to the Inbox.
Accessing the calls in your Call Inbox during a call
You can access the calls in your Call Inbox while you are in an active call.
To access the calls in your Call Inbox during a call:
1.
Press the Up/Down navigation key to highlight a call from the list of calls in your Call Inbox.
2.
Choose one of the following:
— Press the Select context-sensitive soft key to initiate a call to the highlighted caller.
Note: This places the current call on hold, if it is not already on hold.
— Press the Back context-sensitive soft key to return to the in-call screen.
115
While on an active call
While on an active call
You can use the following features during an active call:
• “Making a new call” on page 116
• “Call Waiting” on page 117
• “Placing a call On Hold” on page 117
• “Using call conferencing” on page 124
• “Transferring a call” on page 126
• “To park a call:” on page 129
You can use the Action context-sensitive soft key to perform the following actions with an active call:
1.
New Call—to begin a new call while other calls are on hold.
2.
Transfer Call—to transfer the call to another phone number or SIP address.
Making a new call
You can initiate a new call during a current call. If you do not place the current call on hold first, the IP Deskphone automatically places the current call on hold when you initiate a new call. You can initiate a new call by using any of the following methods:
• “Initiating a call using the active call context-sensitive soft key menu” on page 116
• “Initiating a call from the Address Book” on page 92
• “Initiating a call from the Call Inbox” on page 113
Initiating a call using the active call context-sensitive soft key menu
You can initiate a call using the active call context-sensitive soft key menu.
116
While on an active call
To initiate a call using the active call context-sensitive soft key menu:
More…
NewCall
Back
1.
Choose one of the following:
— While on a call, press the More… context-sensitive soft key, and then the NewCall context-sensitive soft key.
The IP Deskphone produces a dial tone.
2.
Choose one of the following:
— Use the dial pad to dial the number or SIP address.
Note: This places the current call on hold, if it is not already on hold, and you can continue to initiate the call as normally.
— Press the Back context-sensitive soft key to return to the in-call screen.
Call Waiting
While you are on an active call and you receive an incoming call. You are notified of an incoming call by a message on the LCD screen and a notifying beep. Answering the new call places the active call on hold you can also redirect the new call, decline the new call, transfer the new call, or ignore the new call. For more information, see “Receiving a call” on page 83 .
Placing a call On Hold
Use the Hold feature when you are talking to one contact and want to perform another action, such as answer a new incoming call, transfer a
117
While on an active call call, or initiate a new call. You can have a number of calls on hold at the same time.
To place a call on hold:
1.
Press the Hold fixed key.
The LCD on hold icon flashes beside the line on hold.
To retrieve a call on hold:
chad
1.
To retrieve a call on hold do one of the following:
— Press the Line feature key beside the flashing LCD indicator.
— Press the Hold fixed key.
Multiple calls On Hold
When you have more than one call on hold, use the navigation key to highlight a call on the LCD screen. You can perform an action with that call by using the context-sensitive soft keys on the In-call menu list. The context-sensitive soft keys displayed vary depending on the type of call that is currently selected. For example, a held call has the Activate context-sensitive soft key instead of the Audio context-sensitive soft key.
When you highlight a call that is not active, you can retrieve the call from on hold and make it active by pressing the Activate context-sensitive soft key.
Multiple calls In-call mode
When the IP Deskphone has multiple calls connected at the same time, you can access menu items.
118
While on an active call
Context-sensitive soft keys for the multiple calls In-call display screen
NewCall
Audio/Actvate
Press NewCall context-sensitive soft key to obtain a dial tone to place another call. The
NewCall context-sensitive soft key is used to make a conference call. This key behaves like the Conf context-sensitive soft key.
Press the Audio context-sensitive soft key to change the audio settings or the current active call.
The Actvate context-sensitive soft key appears when the highlighted call is not the selected call.
Press the Actvate context-sensitive soft key to place the current call on hold and activate the call you want to connect to.
This context-sensitive soft key is also used to retrieve calls parked against the user.
Note: The Actvate context-sensitive soft key never appears at the same time as the Audio context-sensitive soft key
119
While on an active call more…
Press the more… context-sensitive soft key to select a new menu list of context-sensitive soft keys.
When you press the more… contextsensitive soft key, a different selection of context-sensitive soft keys appears.
• If you press the more… contextsensitive soft key once from the first menu list, you access the following context-sensitive soft keys:
[Trnsfer] [more...]
• If you press the more… contextsensitive soft key from the first menu list twice, you access the following contextsensitive soft keys:
[Prefs] [more…]
• If you press the more… contextsensitive soft key from the first menu list three times, you return to the first menu list with the following context-sensitive soft keys.
[NewCall] [Audio] [more…]
When you press the more.… context-sensitive soft key for the first time, the following context-sensitive soft keys appear on the menu list.
Trnsfer Press the Trnsfer context-sensitive soft key to transfer the current call.
120
While on an active call more… Press the more… context-sensitive soft key to select a new menu list of context-sensitive soft keys.
The next available menu list contains the following context-sensitive soft keys:
[Conf] [Prefs] [more…]
When you press the more… context-sensitive soft key for the second time, the following context-sensitive soft keys appear on the menu list.
121
While on an active call
Prefs Press the Prefs context-sensitive soft key to display the Preferences menu.
The menu items include the following:
1.
Display—use to adjust the display settings of the LCD screen.
2.
Audio—use to adjust tones and volume settings.
3.
Feature Options—use to configure the following:
— Call Ignore Action
— Call Fwd Notification
— Answer Mode Settings appear when the Auto Answer Mode is enabled on the IP Deskphone.
4.
Language—use to change the interface language.
5.
Misc Options—use to access the following options:
— Alpha Dialing
— Search Method
— Incoming Privacy
— Outgoing Privacy
— Hold Mode: Private
— Time
122
Prefs more…
While on an active call
6.
Network—use to access the following:
— Server Settings
— Device Settings
— Diagnostics
— Disable screensaver
— Licensing
— Lock
7.
User Settings—use to modify the following:
— Call Settings
Press the more… context-sensitive soft key to return to the first menu list of contextsensitive soft keys.
The next available menu list contains the following context-sensitive soft keys:
[NewCall] [Audio] [more…]
To access a call on hold when multiple calls are on hold:
1.
Press the Up/Down navigation key to highlight a call on hold.
123
While on an active call
Chad
2.
To retrieve the highlighted call on hold do one of the following:
— Press the Line feature key beside the flashing LCD indicator.
— Press the Hold fixed key to retrieve a call on hold.
To make a call on hold the active call:
1.
Press the Up/Down navigation key to highlight a call on hold.
Actvate
2.
Press the Activate context-sensitive soft key to make the highlighted call on hold the active call.
This removes the call from on hold and automatically places the previous call on hold.
Using call conferencing
You can use the Conference feature to establish a conference call between the active call and calls on hold. The Conference feature is available when you are on an active call.
124
While on an active call
To use call conferencing:
1.
Enter the first phone number or SIP address that you want to call.
2.
Place the active call on hold.
3.
Make a second call.
Conf
Feature
4.
When the second call is connected, choose one of the following methods to establish a conference call:
— Press the Conf soft key and then press the line button of the first held call.
OR
— Press the Feature soft key.
— Enter 3 on the keypad.
125
While on an active call
— Press the Enter button.
— Press the Line button of the first held call.
Transferring a call
When more than one call is on hold, the call you want to transfer must be the active call. For more information, see “To make a call on hold the active call:” on page 124 .
Note 3: The IP Deskphone does not automatically place the call you want to transfer on hold. To prevent the caller from hearing the transfer process, place the caller on hold and then complete the transfer process.
To transfer a call to another phone:
1.
Press the Up/Down navigation key to highlight Transfer Call from the menu.
Trnsfer abc
2.
Press the Trnsfer context-sensitive soft key while on a call to access the Trnsfer menu.
3.
Press the abc/123 context-sensitive soft key to toggle between numeric and alphabetic input.
126
Select
Transfr
Clear
Back
While on an active call
4.
Choose one of the following:
— Enter the phone number or SIP address to which you are transferring the call.
— Select a contact from the Address
Book or Call Inbox by pressing the corresponding fixed key.
Highlight a contact from the list and then press the Select contextsensitive soft key.
5.
Choose one of the following:
— Press the Transfr context-sensitive soft key to connect the calling party.
— To erase the address you enter, press the Clear context-sensitive soft key.
— To return to the previous screen, press the Back context-sensitive soft key.
127
While on an active call
Yes
No
Back
The IP Deskphone prompts you with the following question, Consult with party?
6.
Select one of the following contextsensitive soft keys:
— Press the Yes context-sensitive soft key to consult with the contact to which you are transferring the call before completing the transfer.
— Press the No context-sensitive soft key to transfer the call without consulting the contact to whom you want to transfer the call.
— Press the Back context-sensitive soft key to return to the previous screen.
128
While on an active call
Using the Call Park feature
You can use the Call Park feature to temporarily park a call so that you or another user can retrieve the parked call from another phone. Using Call
Park does not tie up a line, because the call is held on the IP Office call server.
To park a call:
Feature 1.
Press the Feature soft key..
Park 2.
Enter 74 on the keypad.
3.
Press the Enter key, located in the center of the navigation key.
The deskphone displays the following prompt: PrkOn:>
4.
Using the key pad, enter an ID for the parked call. Enter an ID that is up to 9 digits in length. You will need to enter this ID when you retrieve the call from park.
5.
Press the Enter key.
Note: If there is currently an active called parked that uses the same ID as the one you have entered, the deskphone displays Forbidden. Enter a new ID.
129
While on an active call
Retrieving a Parked Call
You must have the retrieval code to retrieve a parked call from the server.
You can retrieve a parked call while the IP Deskphone is in the idle state or while on a call.
To retrieve a parked call:
Feature
1.
Press the Feature soft key.
2.
Press the #74 on the key pad.
3.
Press the Enter key, located in the center of the navigation key.
The deskphone displays the following prompt: UnPark:>
4.
Using the key pad, enter the ID for the parked call.
5.
Press the Enter key, located in the center of the navigation key.
Note: If there is not currently an active called parked that uses the ID that you have entered, the deskphone displays
Forbidden.
130
Configuring custom settings
Configuring custom settings
This chapter provides information about the following topics:
• “Programmable keys” on page 131
• “Assigning functions to programmable keys” on page 132
• “Configuring speed dial keys” on page 134
• “Querying programmable keys” on page 135
• “Configuring Privacy settings” on page 136
• “Audio Codecs” on page 138
Programmable keys
You can configure the programmable keys on the IP Deskphone or on a
Key Expansion Module (KEM) to activate specific features. When you configure a programmable key, it acts as a short cut so that you do not need to enter a feature codes in order to activate the feature.
The IP Deskphone numbers the programmable keys on the IP
Deskphone from 1 to 4. Key 1 is reserved as the line key for the IP
Deskphone.
131
Configuring custom settings
Note: Only the first and seventh expansion modules have been illustrated in this figure.
Assigning functions to programmable keys
You can program keys to activate any of the following features:
• Call Forward — feature code 4
• Paging — feature code 60
• Intercom Call — feature code 66
• Call Park — feature code 74
• Call Pickup group — feature code 75
• Call Pickup extension — feature code 76
• Do Not Disturb — feature code 85
132
Configuring custom settings
To access the button programming screen:
Feature
1.
Press the Feature soft key.
2.
Enter *3 on the dialpad.
Feature
3.
Press the Enter key.
The Button Programming screen displays and prompts you to Press a button.
4.
Press the programmable key that you want to assign a feature to.
The screen prompts you to enter a feature code.
5.
Press the Feature soft key.
The screen displays the following prompt: F> .
6.
Enter a feature code using the keypad.
133
Configuring custom settings
7.
Press the Enter key.
The screen displays ‘Programmed’ and a label displays next to the programmable key to indicate the name of the assigned feature.
Configuring speed dial keys
You can configure the programmable keys for speed dialing.
To configure speed dialing:
Feature
1.
Press the Feature soft key.
2.
Enter *1 or *2 on the dialpad.
3.
Press the Enter key.
The Speed Dial screen displays and prompts you to Press a button.
4.
Press the programmable key that you want to assign a feature to.
The screen prompts you to enter a phone number.
134
Configuring custom settings
5.
Enter a phone number using the keypad.
OK
6.
Press the Ok softkey.
The screen prompts you to enter a label.
Enter a label using the keypad, or press
Enter to use the phone number as the label.
7.
Press the Enter key.
The screen displays ‘Programmed’ and a label displays next to the programmable key to indicate the name of the assigned feature.
Querying programmable keys
You can query any of the programmable keys to confirm which function has been assigned to the key.
To query button programming:
Feature 1.
Press the Feature soft key.
135
Configuring custom settings
2.
Enter *0 on the dialpad.
Exit
3.
Press the Enter key.
The Button Inquiry screen displays for 3 seconds and prompts you to press a button.
4.
Press the programmable key that you want to query.
The screen displays text to indicate the name of the assigned feature for 3 seconds and prompts you to press a button for another query.
5.
When you are finished querying programmable buttons, press the Exit soft key.
Configuring Privacy settings
You can restrict caller information coming to the IP Deskphone or caller information leaving the IP Deskphone. You can restrict the name, SIP address, or both from appearing on the screen.
Incoming call privacy
You can restrict the information for incoming calls to your IP Deskphone by configuring the Incoming Call Privacy setting.
136
Configuring custom settings
To configure Incoming Call Privacy:
Prefs 1.
Press the Prefs context-sensitive soft key, select Misc Options , and then
Incoming Privacy from the menu.
Change
Back
2.
Choose one of the following:
— Press the Change context-sensitive soft key to change the Incoming
Privacy restriction to the highlighted restriction.
— Press the Back context-sensitive soft key to return to the previous menu without implementing any changes.
3.
Press the Up/Down navigation key to highlight one of the following:
— None (no restriction)
— Name (restricts only the name)
— Address (restricts only the address)
— All (restricts name and number)
Outgoing call privacy
You can restrict the information for outgoing calls from your phone by configuring the Outgoing Call Privacy setting.
137
Configuring custom settings
To configure Outgoing Call Privacy:
Prefs 1.
Press the Prefs context-sensitive soft key, select Misc Options , and then
Outgoing Privacy from the menu.
Change
Back
2.
Choose one of the following:
— Press the Change context-sensitive soft key to change the Outgoing
Privacy restriction to the highlighted restriction.
— Press the Back context-sensitive soft key to return to the previous menu without implementing any changes.
3.
Press the Up/Down navigation key to highlight one of the following:
— None (no restriction)
— Name (restricts only the name)
— Address (restricts only the address)
— All (restricts name and number)
Audio Codecs
This feature allows you to specify a codec to which you can switch to during an active call. You can use the Preferences menu to modify the order of preference of the codecs between calls.
You can select an audio codec by name during a call, or while the handset is idle. The Audio Codecs feature also gives you control over the audio configuration that is used for inbound and outbound calls.
138
Configuring custom settings
To change the codec while on the call, select Audio , Change codec , and then press OK .
The following context-sensitive soft keys are available on the Audio
Codes page:
• Ok —to view the Audio Codec Selection screen.
• Back —to return to the previous screen.
Audio Codec Selection
The Audio Codec Selection allows you to select a codec to use during inbound and outbound calls.
The following context-sensitive soft keys are available for selecting the audio codes:
• Select : The IP Deskphone attempts to renegotiate the codec for the current call to use the selected codec.
• Back : Allows you to return to the Audio Codec screen.
Audio Codec Ordering
The Audio Codec Ordering allows you to modify the order of preference of codecs to use during inbound and outbound calls.
The following context-sensitive soft keys are available for the audio codec ordering page:
• Save —to save the current order as the new preferred codec order.
• MoveUp —to move the highlighted codec up in the list.
• MoveDwn —to move the highlighted codec down in the list.
• Back —to return to the Audio Codec screen.
The Audio Codec Ordering screen allows you to modify the order of preference of the codecs. You can reorder the preferences, and the changes to the ordering are saved.
139
Maintaining the IP Deskphone
Maintaining the IP Deskphone
The following chapter describes the following advanced features:
• “Viewing the IP Deskphone information” on page 140
• “Accessing the services menu” on page 141
• “Network menu” on page 149
• “Maintaining the IP Deskphone” on page 140
• “File Manager” on page 151
Viewing the IP Deskphone information
To view the Phone information for the IP Deskphone
1.
Press the Services hard key and select
Phone Information from the menu.
You can view the following information:
• Load Ver
• Software
• E.M Software
• FeatActv
• Srv Pkg Location
Note: You cannot make any changes to the setting from this menu.
Viewing additional phone information
When you view the Phone Information menu, you can use the following context-sensitive soft keys to display additional information:
• Details
140
Maintaining the IP Deskphone
• E911
Press the Details context-sensitive soft key to show:
• Primary User
• Primary Domain
• MAC
• IP
• License server
— Status
The contents of this screen include user and IP Deskphone identifiable information that may need to be protected (per US Federal/DoD requirements/guidelines).
Attention: The administrator can disable the Details contextsensitive soft key on the main Phone Information screen to hide information that is protected. If the Details context-sensitive soft key is disabled, you cannot view details on the Phone Information details screen.
To view information about E911 press the E911 context-sensitive soft key after you access the Phone Information screen.
Accessing the services menu
Some of the system features require your user password. You must consult with the system administrator or service provider before you can access some of the features.
To access the services menu:
1.
Press the Services hard key.
2.
Select File Manager .
141
Maintaining the IP Deskphone
The IP Deskphone displays the following menu:
1.
Search—use to perform local/global search.
2.
Login.
3.
Logout— use to logoff the IP Deskphone. For more information, see
“Logging off from the Avaya 1200 Series IP Deskphone” on page 58 .
4.
Check for Updates—use to check for the latest software update for the IP Deskphone. For more information, see “Checking for updates” on page 142 .
5.
Reset Phone— use to perform a reset of the IP Deskphone. For more information, see “Resetting the IP Deskphone phone” on page 143 .
6.
File Manager—For more information, see “Erasing the user data” on page 144 .
7.
Logging System—use to enable/disable SIP logging.
8.
Phone Information—use to view phone details. For more information, see “Viewing the IP Deskphone information” on page 140 .
Checking for updates
You can check for the latest software update for your IP Deskphone.
To check for the latest software update:
1.
Press the Services fixed key.
Select
2.
Select Check For Updates .
3.
Press the Select context-sensitive soft key.
142
Maintaining the IP Deskphone
Yes
No
4.
Choose one of the following:
— Press the Yes context-sensitive soft key check for the latest software update for your IP Deskphone.
— Press the No context-sensitive soft key to return to the previous menu without checking for an update.
Note: While the IP Deskphone checks for an update, it activates Do Not Disturb
(DND).
Resetting the IP Deskphone phone
You can use this feature to reset the phone without unplugging the power cable.
To reset the IP Deskphone:
1.
Press the Services fixed key, and then select Reset Phone .
Select
2.
Press the Select context-sensitive soft key.
abc
3.
Press the abc/123 context-sensitive soft key to toggle between alphabetic or numeric input.
4.
Use the dialpad to enter your password.
143
Maintaining the IP Deskphone
Ok
Back
Yes
No
5.
Choose one of the following:
— Press the Ok context-sensitive soft key.
— Press the Back context-sensitive soft key to return to the previous menu.
The IP Deskphone prompts you with Reset
Phone?
.
6.
Choose one of the following:
— Press the Yes context-sensitive soft key to proceed.
— Press the No context-sensitive soft key to return to the System menu.
Erasing the user data
The IP Deskphone stores user files that you may eventually want to delete. These files include:
1.
Profiles—user profile settings
2.
Sounds—downloaded tones or audio alerts
3.
Languages—downloaded language files
4.
System file—IP Deskphone system configuration file (Deleting this file returns the IP Deskphone to the factory default configuration settings.)
You can delete some or all of these files. The deletion of files is often necessary when the IP Deskphone is redeployed to a different user.
144
Maintaining the IP Deskphone
To delete user data files:
1.
Press the Services fixed key.
abc
2.
Select File Manager .
Note: You must enter your login password to access the File Manager menu.
3.
Press the abc/123 context-sensitive soft key to toggle between alphabetic or numeric input.
4.
Use the dialpad to enter your password.
Ok
Back
5.
Choose one of the following:
— Press the Ok context-sensitive soft key.
— Press the Back context-sensitive soft key to return to the previous menu.
145
Maintaining the IP Deskphone
Select
Delete
Exit
Back
6.
Press the Up/Down navigation key to highlight one of the following:
— Profiles
— Sounds
— Languages
— System file
— All files
7.
Choose one of the following:
— To enter the selected folder, press the Select context-sensitive soft key.
— To delete contents of the selected folder, press the Delete contextsensitive soft key.
Note: Folders cannot be deleted because they are on the IP Deskphone.
— If you are at the root folder of the flash disk, press the Exit contextsensitive soft key to return to the previous menu.
— If you are already inside the folder, press the Back context-sensitive soft key to return to the previous menu.
146
Maintaining the IP Deskphone
To delete a user profile:
Delete
Back
1.
Press the Up/Down navigation key to highlight the user profile you want to delete.
2.
Choose one of the following:
— Press the Delete context-sensitive soft key to delete the highlighted user profile from the list.
— Press the Back context-sensitive soft key to return to the previous menu.
3.
Log off or restart the IP Deskphone to complete the process.
To delete a sound file:
Delete
Back
1.
Press the Up/Down navigation key to highlight the sound file you want to delete.
2.
Choose one of the following:
— Press the Delete context-sensitive soft key to delete the highlighted sound file from the list.
— Press the Back context-sensitive soft key to return to the previous menu.
147
Maintaining the IP Deskphone
To delete a language file:
Delete
Back
1.
Press the Up/Down navigation key to highlight the language file you want to delete.
2.
Choose one of the following:
— Press the Delete context-sensitive soft key to delete the highlighted language file from the list.
— Press the Back context-sensitive soft key to return to the previous menu.
To delete a log file:
1.
Press the Up/Down navigation key to highlight the log file you want to delete.
Delete
Back
2.
Choose one of the following:
— Press the Delete context-sensitive soft key to delete the highlighted language file from the list.
— Press the Back context-sensitive soft key to return to the previous menu.
148
Maintaining the IP Deskphone
To delete the system file without deleting the user profile:
Next
Back
1.
Choose one of the following:
— Press the Next context-sensitive soft key to delete the system file.
— Press the Back context-sensitive soft key to return to the previous menu.
2.
Log out or restart the IP Deskphone to complete the process.
To delete all files:
Next
Back
1.
Choose one of the following:
— Press the Next context-sensitive soft key to delete the system file and user profiles.
— Press the Back context-sensitive soft key to return to the previous menu.
2.
Log out or restart the IP Deskphone to complete the process.
Network menu
Primarily, the system administrator is the only person authorized to access the network menu and to use an administration password to access the items.
The following Network menu items are available:
149
Maintaining the IP Deskphone
• Server Settings—to select and edit domains
• Device Settings—to configure the network settings
• Diagnostics—to run a trace route or send a ping to diagnose the network connection
— IP Set and DHCP information
— Network Diagnostics tools
— Ethernet Statistics
— IP Network Statistics
— Advanced Diag Tools
— Test Key
• Lock Menu—to access to the Network Menu
To access the Network menu:
Prefs
1.
Choose one of the following:
— Press the Services fixed key twice quickly.
— Press the Prefs context-sensitive soft key, and then select Network from the menu.
Note: You need to enter an administration password to access the
Network menu items.
Automatic remote software updates
Note: Your system administrator must enable Remote check for
update for this feature to work.
Your IP Deskphone may be configured to perform automatic software updates. If this feature is configured, the IP Deskphone displays when a software update is scheduled to occur, and Yes and No context-sensitive
150
Maintaining the IP Deskphone soft keys are displayed. If the IP Deskphone is idle and no key is pressed, the software update begins in one minute.
If you press Yes , the software download begins.
If you are using your IP Deskphone (this includes on hold, on a conference call, or when your IP Deskphone is ringing) and you press No , the call is not disconnected and the software update does not occur. The
IP Deskphone displays the software download prompt again in three minutes a total of three times.
If, after the third notification, you press No or no key is pressed, the software update does not occur. Your IP Deskphone attempts the software download process again in two hours.
Note: If you allow the update to proceed and the server is down, the
IP Deskphone does not ask for updates again.
File Manager
You can use File Manager to navigate to the IP Deskphone file system.
Acess the File Manager menu through the Services menu.
151
Visual indicators
Visual indicators
The Avaya 1200 Series IP Deskphones use visual indicators or cues to indicate incoming calls and messages. The display icons on the IP
Deskphone also indicate the current call state.
Visual Alerter/Message Waiting Indicators
The red LED light at the top right of the IP Deskphone lights to indicate incoming calls or when a caller leaves you voice mail.
Table 9 on page 152 lists the visual indicator and the LED status.
Table 9: Visual Alerter/Message Waiting Indicator
LED
Red LED
Visual indicator
Voice mail left by caller
Incoming call (IP
Deskphone ringing)
LED status
Steady red light until message is reviewed.
Fast blinking red light.
Monitoring other extensions
Your system administrator may enable you to monitor the status of other lines. When this feature is enabled, you can use the visual indicators on your IP deskphone to monitor whether other extensions are idle or busy.
You can also answer calls to those extensions.
152
Visual indicators
Table 10 on page 153 lists the status visual indicators that the IP deskphone uses to show the status of the line that you are monitoring.
Table 10: Visual indicators for monitored lines
Icon Line status
Idle
Flashing Ringing
Solid
Busy
153
Visual indicators
154
Quick reference
Quick reference
This section provides a quick reference guide for the Avaya 1200 Series
IP Deskphone. See the following sections for more information:
• “Fixed keys” on page 155
• “Commonly used functions” on page 157
• “Context-sensitive soft keys” on page 158
• “Display screen icons” on page 162
Fixed keys
The fixed keys on Nortel IP Phone 1120E are available with either icons or English text..
Short-cut and navigation function keys
Copy
Copy information from the Address Book,
Inbox and Outbox.
Services
Access Search, Login, Logout, Check For
Updates, Reset Phone, File Manager,
Logging System, and Phone Information.
Press twice quickly to access the Network menu.
Quit
Quit or exit from a menu.
Inbox
Access your inbox to view all calls or missed calls and to return a call.
155
Quick reference
Directory
Access your address book to view, add or edit entries or initiate a call.
Enter
Telephone feature keys
Use the Enter key to select highlighted menu items and to set preferences. The
Enter key duplicates the function of the phone and select context-sensitive soft keys.
Mute
Handsfree
Goodbye
Use to increase the volume of the handset, headphones, phone speaker
(handsfree) and alerting volume (phone ringing).
Use to decrease the volume of the handset, headphones, phone speaker
(handsfree) and alerting volume (phone ringing).
Use mute to listen to the call without transmitting. The red LED on the Mute key lights when the Mute feature is enabled.
Activates the built in speaker and microphone. The red LED on the
Handsfree key lights when the Handsfree feature is enabled.
Use to release a call (hang up) and to exit a menu when not on an active call.
156
Quick reference
Headset
Hold
Activates your IP Deskphone headset when connected. The red LED of the
Headset key lights when you use a headset.
Use to place a call on hold or to retrieve a call on hold.
Note: The abc/123 context-sensitive soft key toggles between alphabetic and numeric input. When the context-sensitive soft key label is abc, you can enter alphabetic text and when the contextsensitive soft ley label is 123, you can enter numbers.
Commonly used functions
Procedures for the most commonly used functions are provided below.
Login
1.
Enter your User ID and press the Login key.
2.
Enter your password and press the Next key.
3.
To permanently login, press the Next key.
To login for a period of time, press the Timed key, enter the duration of your login, and press the Next key.
Logout
4.
Press the Services hard key and then select Logout.
5.
Press the abc/123 context-sensitive soft key to toggle between alphabet and numeric input.
6.
Press Logout context-sensitive key.
Making a call
157
Quick reference
• Lift the Handset or press the Headset key, Handsfree key or the
Line key and enter the SIP address or phone number and press send. Or, press the Redial key to call the previously entered SIP address or phone number.
• Press the Services hard key, select Search , select an entry in the
Address Book, and then press the Call key.Lift the Handset or press the
Headset key, Handsfree key or the Line feature key and dial from the
Address Book or Inbox as follows:
– 1. Press the Address Book or Inbox key.
– 2. Navigate to the required entry.
– 3. Press the Select key to conect.
Answering a call
Perform one of the following to answer a call:
• Press the Handsfree key
• Press the Headset key
• Press the Line key
• Press the Answer key
• Pick up the Handset.
If you choose not to answer the call, you can press one of the following keys:
Ignore—Stops call ringing
Making an emergency call
To make an emergency call, logging on is not required. Choose one of the following options:
• Lift the Handset and dial the emergency number.
• Press the Handsfree key and dial the emergency number.
• Press the Headset key and dial the emergency number.
Context-sensitive soft keys
The following context-sensitve key menus are provided below:
• “Idle phone display” on page 159
• “Active call display” on page 160
158
Idle phone display
Feature Msgs Redial More...
Quick reference
More… context-sensitive soft key menu (first)
Feature 123/abc Prefs More...
A description of the context-sensitive soft keys available with the phone is idle is provided below.
Redial or NewCall
Redial the last dialed number.
• If there is no stored redial number, NewCall appears and has the same effect as pressing the primary user line key (dial prompt).
abc or 123
Toggle between alpha and numeric input modes.
• To type letters, abc must be displayed.
• To type numbers, press abc to display 123 on the menu list.
Msgs
Display the Messages menu.
1.Voice Mail—Use to access your Voice Mail. The IP Deskphone connects to the server to retrieve your Voice Mail.
ScrnSvr
Activate the screensaver (only if the screensaver feature is enabled).
Prefs
159
Quick reference
Display the Preferences menu.
1. Display—Adjust screen display settings.
2. Audio—Adjust tones and volume settings.
3. Feature Options—Program call ignore actions and call fwd notification.
4. Language—Change language.
5. Misc Options—Set alpha dialing, search method, privacy settings, location, and time.
6. Network—Access Server Settings, Device Settings,
Diagnostics and Lock.
7. User Settings—Modify call settings, voice mail setting, and remembering settings.
More
Select a new menu list.
• When you press More..., the following context-sensitive soft keys appear:
– [abc] or [123]
– [Prefs]
Active call display
Feature Conf Trans More...
More… context-sensitive soft key menu
Feature Audio New Call More...
More… context-sensitive soft key menu
Feature Prefs More...
160
Quick reference
When you press the More… context-sensitive soft key for the third time, you return to the first menu list.
A description of the context-sensitive soft keys available with the phone is idle is provided below.
Conf
Obtain a dial tone to place another call during an active call.
• Use to make a conference call.
Trnsfer
• Transfer the current call to another location or contact.
Audio
1. Change audio setting—Use to change the audio settings based on the available bandwidth.
2. Monitor audio quality—Diagnostic tool to monitor the audio quality.
NewCall
Obtain a dial tone to place another call during an active call.
• Use to make a conference call.
• Behaves like the Conf Context-sensitive soft key.
Prefs
See “Idle phone display” on page 159 .
More…
Select a new menu list.
• When you press More..., a different selection of Context-sensitive soft keys appears.
– Press once to switch to: [NewCall].
– Press twice to switch to: [Prefs] [ ] [ ].
– Press three time to switch back to the main menu list: [Trnsfer]
[Audio].
161
Quick reference
Display screen icons
The table below provides a list of the following display screen icons:
• Call state—Icons to indicate the Call state of your phone.
• Inbox—Icons to indicate the status of each incoming calls in your
Inbox..
Call state
On hook
On the phone
On hold
Call Forward (enabled)
Do Not Disturb (enabled)
Outgoing call, Incoming call (ringing)
Missed call
Inbox
Incoming Call Answered
Incoming Call, Missed, New
Incoming Call, Missed, Reviewed
Icon
Icon
162
Limitations
Limitations
Table 11 on page 163 lists the limitations for Avaya 1200 Series IP
Deskphones when used with IP Office 7.0.
Table 11: Limitations
Item
Decline softkey
Call Subject
Function
The Call Decline feature is not supported. Pressing the Decline softkey that displays during an incoming call will not decline the call.
Call Decline Reasons are not supported. A menu item for Call
Decline Reasons displays on the IP deskphone when you select Prefs >
Feature Options, but will not function.
A menu item for # Ends Dialing displays on the IP deskphone when you select Prefs > Misc Options, but this feature is not supported. The option is disabled by default; Avaya recommends that you do not change this setting.
The Call Subject feature is not supported. A menu item for Call
Subject displays on the IP deskphone when you select Prefs > Feature
Options, but information that you enter here will not be.included in the call.
163
Limitations
164
Third party terms
Third party terms
Third Party Terms for Avaya 11xx 12xx sw release 3.0 thru 4.0 (Aug - Nov 2010)
Certain portions of the product ("Open Source Components") are licensed under open source license agreements that require Avaya to make the source code for such Open Source Components available in source code format to its licensees, or that require Avaya to disclose the license terms for such Open Source Components. For a period of three years from your date of purchase of a product containing any of the software listed below from Avaya Inc., any Avaya affiliate or an authorized Avaya reseller, we will provide upon request a complete machine readable copy of the source code for such Open Source Component on a medium customarily used for software interchange for a charge no more than our cost of physically performing source distribution. To get access to the source code, you may contact Avaya at (408) 577-7666.
The Open Source Components are provided "AS IS". ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDERS OR THE CONTRIBUTORS OF THE
OPEN SOURCE COMPONENTS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
165
Third party terms
The following component is licensed under Public Domain:
DateTime
* PUBLIC DOMAIN NOTICE
* National Center for Biotechnology Information
*
* This software/database is a "United States Government Work" under the terms of the United States Copyright Act. It was written as part of the author's official duties as a United States Government employee and thus cannot be copyrighted. This software/database is freely available to the public for use. The National Library of Medicine and the U.S. Government have not placed any restriction on its use or reproduction.
*
* Although all reasonable efforts have been taken to ensure the accuracy and reliability of the software and data, the NLM and the U.S.
Government do not and cannot warrant the performance or results that may be obtained by using this software or data. The NLM and the U.S.
Government disclaim all warranties, express or implied, including
166
Third party terms warranties of performance, merchantability or fitness for any particular purpose.
*
* Please cite the author in any work or product based on this material.
*
* =====================================================
*
* Authors: Anton Butanayev, Denis Vakatov, Vladimir Ivanov
END OF TERMS AND CONDITIONS
GNU
The following component is licensed under the GNU General Public
V2 license: libstdc++ Copyright (C) 1989, 1997, 1998, 1999 Free Software
Foundation, Inc.
GNU General Public V2 License
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C)
1989, 1991 Free Software Foundation, Inc. 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This General Public License applies to most of the Free Software
Foundation\'s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These
167
Third party terms restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author\'s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors\' reputations.
Finally, any free program is threatened constantly by software patents.
We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone\'s free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The
\"Program\", below, refers to any such program or work, and a \"work based on the Program\" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term \"modification\".) Each licensee is addressed as \"you\". Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the
Program does. 1. You may copy and distribute verbatim copies of the
Program\'s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the
Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a
168
Third party terms fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: * a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. * b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. * c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the
Program. In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the
Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: * a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be
169
Third party terms distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients\' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this
License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not
170
Third party terms excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the
Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The
Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and \"any later version\", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
171
Third party terms preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS
REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. END OF TERMS AND CONDITIONS How to Apply These
Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the \"copyright\" line and a pointer to where the full notice is found. one line to give the program\'s name and an idea of what it does.
Copyright (C) yyyy name of author This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details. You should have received a copy of the
172
Third party terms
GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with
ABSOLUTELY NO WARRANTY; for details type `show w\'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c\' for details. The hypothetical commands `show w\' and
`show c\' should show the appropriate parts of the General Public
License. Of course, the commands you use may be called something other than `show w\' and `show c\'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a
\"copyright disclaimer\" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision\' (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser
General Public License instead of this License.
END OF TERMS AND CONDITIONS
Zlib
The following component is licensed under zlib license:
Zlib 1.2.1
Zlib License
/* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.4, March 14th, 2010
Copyright (C) 1995-2010 Jean-loup Gailly and Mark
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this
173
Third party terms software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
END OF TERMS AND CONDITIONS
Libpng
The following component is licensed under libpng license:
Libpng 1.2.37 - June 4, 2009
Libpng License
This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this sentence.
libpng versions 1.2.6, August 15, 2004, through 1.2.34, December 18,
2008, are Copyright (c) 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-
1.2.5 with the following individual added to the list of Contributing Authors
Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are
Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed
174
Third party terms according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are
Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright
(c) 1996, 1997 Andreas Dilger
Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are
Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
175
Third party terms
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied "AS IS". The Contributing
Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG
Reference Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this
176
Third party terms source code in a product, acknowledgment is not required but would be appreciated.
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like:
printf("%s",png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files
"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open
Source is a certification mark of the Open Source Initiative.
Glenn Randers-Pehrson glennrp at users.sourceforge.net
December 18, 2008
END OF TERMS AND CONDITIONS
Kern_random
The following component is licensed under kern_random license:
Kern_random Copyright Theodore Ts'o, 1994, 1995. All rights reserved.
Kern-random License
.\" This code is derived from software contributed to Berkeley by Chris
Torek. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
.\" 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
.\"This product includes software developed by the University of
California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
177
Third party terms may be used to endorse or promote products derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
.\"
END OF TERMS AND CONDITIONS
Wchar functions
The following component is licensed under wchar functions license:
Wchar functions
Wchar functions License
.\" Copyright (c) 1990, 1991, 1993
.\"The Regents of the University of California. All rights reserved.
.\"
Copyright (c) <YEAR>, <OWNER>
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,
178
Third party terms this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the <ORGANIZATION> nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE
END OF TERMS AND CONDITIONS
Libjpeg
The following component is licensed under libjpeg license:
Libjpeg
Libpeg License
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this
README file must be included, with this copyright and no-warranty notice
179
Third party terms unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group".
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept
NO LIABILITY for damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the
Independent JPEG Group's software".
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor.
END OF TERMS AND CONDITIONS
T-Rex
The following component is licensed under the T-Rex license:
T-Rex
T-Rex License
Copyright (C) 2003-2004 Alberto Demichelis
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented;you must not claim that you wrote the original software.If you use this software in a
180
Third party terms product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
END OF TERMS AND CONDITIONS
181
Third party terms
182
advertisement
Related manuals
advertisement
Table of contents
- 3 Contents
- 9 Welcome
- 9 Basic features
- 10 IP Deskphone controls
- 16 IP Deskphone display
- 16 Cleaning the IP Deskphone LCD display screen
- 16 Context-sensitive soft keys
- 20 Idle display screen after dial pad input
- 21 In-call context-sensitive soft keys
- 29 Navigation keys
- 31 Available IP Deskphone call features
- 32 Security features
- 32 Secure connection
- 33 Regulatory and safety information
- 35 DenAn regulatory notice for Japan
- 36 Using your Avaya 1200 Series IP Deskphone
- 36 Getting started
- 37 Before you begin
- 37 Connecting the components
- 38 Attaching the foot stand (optional)
- 39 Connecting the handset
- 39 Connecting the headset (optional)
- 40 Connecting AC power (optional)
- 40 Connecting the LAN Ethernet cable
- 41 Connecting the PC Ethernet cable
- 41 Wall mounting (optional)
- 41 Entering text
- 42 Entering text using the IP Deskphone dialpad
- 45 Configuring the dialpad to alphanumeric dialing
- 47 Accessing the Avaya 1200 Series IP Deskphone
- 47 Logging on
- 48 Automatic login
- 48 Setting the domain
- 49 Password protection for domains
- 50 Selecting a language
- 51 Logging on to your IP Deskphone
- 54 Configuring the duration of the login
- 55 Timed logoff
- 55 Timed logoff while the IP Deskphone is idle
- 55 Timed logoff while on a call
- 56 Selecting a location
- 56 User Profile
- 57 Confirmation logon screen
- 58 Logging off from the Avaya 1200 Series IP Deskphone
- 58 Making an emergency call
- 60 Configuring Avaya 1200 Series IP Deskphones
- 60 Adjusting the display screen contrast
- 61 Creating the idle screen text display
- 62 Configuring Menu auto back-out
- 64 Selecting a ring pattern
- 64 Adjusting the volume
- 66 Adjusting the volume of the Handset, Headset, and Handsfree mode
- 68 Selecting a language
- 69 Selecting the date and time format
- 74 Making a call
- 75 Making a call using off-hook dialing
- 77 Making a call using on-hook dialing
- 77 Using handsfree calling
- 79 Making a call using redial
- 80 Making an intercom call
- 81 Making paging calls
- 83 Receiving a call
- 83 Caller identification
- 83 Answering an incoming call
- 84 Ignoring an incoming call
- 85 Configuring Do Not Disturb
- 87 Receiving intercom calls
- 87 Receiving paging calls
- 88 Receiving calls to a pickup group
- 89 Receiving voice mail
- 90 Forwarding calls to another number
- 92 The Address Book
- 92 Viewing the Address Book
- 92 Initiating a call from the Address Book
- 94 Adding a contact to your Address Book
- 95 Editing a contact in your Address Book
- 99 Copying information to the Address Book
- 101 Searching for a contact in the Address Book
- 102 Using the Search feature in the Address Book
- 103 Using the Search feature
- 103 Using Local Search
- 106 Call Inbox
- 106 Accessing the Call Inbox
- 106 Managing calls in the Call Inbox while not on a call
- 109 Viewing the details of a call in the Call Inbox
- 110 Managing missed calls
- 111 Missed Calls Notification
- 113 Initiating a call from the Call Inbox
- 114 Deleting calls in your Call Inbox
- 115 Accessing the calls in your Call Inbox during a call
- 116 While on an active call
- 116 Making a new call
- 116 Initiating a call using the active call context-sensitive soft key menu
- 117 Call Waiting
- 117 Placing a call On Hold
- 118 Multiple calls On Hold
- 124 Using call conferencing
- 126 Transferring a call
- 129 Using the Call Park feature
- 130 Retrieving a Parked Call
- 131 Configuring custom settings
- 131 Programmable keys
- 132 Assigning functions to programmable keys
- 134 Configuring speed dial keys
- 135 Querying programmable keys
- 136 Configuring Privacy settings
- 136 Incoming call privacy
- 137 Outgoing call privacy
- 138 Audio Codecs
- 139 Audio Codec Selection
- 139 Audio Codec Ordering
- 140 Maintaining the IP Deskphone
- 140 Viewing additional phone information
- 141 Accessing the services menu
- 142 Checking for updates
- 143 Resetting the IP Deskphone phone
- 144 Erasing the user data
- 149 Network menu
- 150 Automatic remote software updates
- 151 File Manager
- 152 Visual indicators
- 152 Visual Alerter/Message Waiting Indicators
- 152 Monitoring other extensions
- 155 Quick reference
- 155 Fixed keys
- 157 Commonly used functions
- 158 Context-sensitive soft keys
- 162 Display screen icons
- 163 Limitations
- 165 Third party terms
- 165 Third Party Terms for Avaya 11xx 12xx sw release 3.0 thru 4.0 (Aug - Nov 2010)
- 167 GNU
- 173 Zlib
- 174 Libpng
- 177 Kern_random
- 178 Wchar functions
- 179 Libjpeg
- 180 T-Rex