Control4 C4-16S2-E-B Audio Matrix Switch Installation and Setup Guide

WARNING! Do not expose the apparatus to dripping or splashing. Do not place
objects filled with liquids near the apparatus.
AVERTISSEMENT ! N’exposez pas l’appareil à l’égoutture ou à l’éclaboussement.
Ne placez pas les objets remplis de liquides près de l’appareil.
WARNING! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus. Setzen
Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat gefüllt werden.
Audio Matrix Switch
Installation and Setup Guide
WARNING! To reduce the risk of fire or electrical shock, do not expose this apparatus
to rain or moisture.
AVERTISSEMENT ! Pour réduire le risque du feu ou de choc électrique, n’exposez
pas cet appareil à la pluie ou à l’humidité.
WARNING! Um die Gefahr des Feuers oder des elektrischen Schlages zu verringern,
setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.
IMPORTANT! Using this product in a manner other than outlined in this document
voids your warranty. Further, Control4 is NOT liable for any damage incurred with the
misuse of this product. See “Limited 2 Year Warranty.”
IMPORTANT ! Employer ce produit en quelque sorte autre que décrit dans ce document vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dommage
encouru avec l’abus de ce produit. Voyez que « a limité la garantie de 2 ans. »
WICHTIG! Das Verwenden dieses Produktes in gewissem Sinne anders als umrissen
in diesem Dokument hebt Ihre Garantie auf. Weiter ist Control4 NICHT für irgendeine
Beschädigung verantwortlich, die mit der Fehlanwendung dieses Produktes genommen wird. Sehen Sie, daß „begrenzte eine 2 Jahr-Garantie.“
Supported Models
•
C4-16S2-E-B Control4® Audio Matrix Switch
Box Contents
•
•
•
Control4 Audio Matrix Switch
IEC Power Cord
Audio Matrix Switch Installation and Setup Guide (this document)
1. Read and keep these instructions.
2. Heed all warnings and follow all instructions for this product in this and other Control4® documents included with or related to this product.
3. Improper use of this product may result in potential electric shock.
4. Do not use this product near water.
5. Never spill liquid of any kind on this product.
6. Clean this product only with a damp or dry cloth. Do not use liquid cleaners or aerosol
cleaners to clean the product.
7. Install this product according to the manufacturer’s instructions.
8. Install this product according to the National Electrical Code ANSI/NFPA 70 and the
prevailing local codes and requirements.
9. This product should be operated with the type of power indicated on the marked label.
If you are not sure of the type of power available, consult your Control4 dealer or local
power company.
10.Slots and openings on a cabinet rack, and components used with this product are provided for ventilation, reliable operation, and protection from overheating of the product.
These slots and openings must not be blocked or covered.
11. This product should never be placed near or over a radiator or heat register, or in a
built-in installation unless proper ventilation is provided.
12.Never push objects of any kind into this product through cabinet slots because they
may touch dangerous voltage points or short out parts that could result in a fire or
electric shock.
13.Only use the attachments and accessories included with this product or recommended
by Control4.
14.Do not allow anything to rest on the power cord. Do not install or place this product
where people will walk on the cord.
15.Do not use extension cords with any products in a Control4 system.
16.If applicable, unplug this product during lightning storms or when unused for long
periods of time.
17.Do not exceed the maximum wire size (if specified) in this guide.
18.This product must be installed by qualified professionals only.
19.Do not attempt to service this product yourself except as noted in this guide. Opening
or removing covers of internal components may expose you to dangerous voltage
points or other risks.
20.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged or frayed in any way; for example, a power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into this product, this
product has been exposed to rain or moisture, this product does not operate normally,
or this product has been dropped.
Ethernet — Ethernet RJ-45 port for a 10/100 MB Ethernet connection.
3
Audio In (Left-Right Pairs) 1-16 — RCA jacks for stereo channel input for up to 16
stereo analog sources.
4
Audio Out (Left-Right Pairs) 1-16 — RCA jacks for stereo channel line output for up to
16 amplifiers.
Product Specifications
Inputs
# of Channels
16 L/R Stereo Pairs
Input Connectors
RCA Jacks
Input Impedance
10 kW typical
Nominal Input Level
-14 dBV
Maximum Input Level
+4 dBV
Outputs
# of Channels
16 L/R Stereo Pairs
Output Connectors
RCA Jacks
Output Impedance
50 W typical
Nominal Output Level
-14 dBV
Maximum Output Level
+4 dBV
ADVERTISSEMENT! L’équipement doit être relié à une sortie de douille de forces à
un raccordement de mise à la terre protecteur.
Available Gain
Mute (-75 dB) to -40 to +8 dB
Treble
-12 to +12 dB, 2 dB steps, High Shelving EQ
Bass
-12 to +12 dB, 2 dB steps, Low Shelving EQ
Balance
L/R
IMPORTANT ! Pour éviter de produire de la chaleur excessive, n’empilez pas les
points de haut-parleur sur l’un l’autre ou tout autre équipement.
WICHTIG! Um übermäßige Hitze zu erzeugen zu vermeiden, stapeln Sie Lautsprecher-Punkte nicht auf einander oder andere Ausrüstung.
Features and Benefits
•
2
Zone (Output) Control
IMPORTANT! To avoid generating excessive heat, do not stack Speaker Points on
top of each other or other equipment.
•
•
•
•
Power Plug Port — For standard IEC cord (included). Supports universal AC input
(100-240 VAC 50/60 Hz).
WARNING! Equipment must be connected to a Mains socket outlet with a protective
earthing connection.
WARNUNG! Ausrüstung muss an einen Hauptleitungseinfaßungsanschluß mit einem
schützenden Erdunganschluß angeschlossen werden.
Important Safety Instructions
1
Switches up to 16 input sources to up to 16 simultaneous output zones.
Adjustable gain, treble, bass, and balance for each zone
Audio sensing on inputs
Device chassis is three standard rack units (RU) tall and rack mountable conforming to
EIA 19” rack standards (5.25” x 17.34” x 14”)
Communicates with control devices via Ethernet 10/100 port and ZigBee (a wireless
standard for mesh-networking).
Backlighting feature turns on with any button push or Select Dial push and stays lit for a
preset time (default is 30 seconds).
Front and Rear Panel Description
Front Panel
Voltage
100-240V~
Frequency
50/60 Hz
Amps
0.12/0.06 Amps
Watts
14.4 Watts
Source Inputs
To set the network configuration:
1
At the In to Out Assignments screen, press the Network button.
2
On the Network Configuration screen, choose an Ethernet or ZigBee network by rotating and pressing the Select dial.
IMPORTANT! When making logical connections in Composer, identify the device as
the network type (Ethernet or Zigbee) that you choose on the device network configuration. To avoid unexpected behavior, do not identify the device as both network
types.
IMPORTANT! En établissant les rapports logiques dans le compositeur, identifiez
le dispositif comme type de réseau (Ethernet ou Zigbee) ce vous choisissent sur la
configuration réseau de dispositif. Pour éviter le comportement inattendu, n’identifiez
pas le dispositif en tant que les deux types de réseau.
WICHTIG! Wenn Sie logische Beziehungen im Komponisten herstellen, identifizierenen Sie die Vorrichtung als die Netzart (Ethernet oder Zigbee) diese Sie wählen
auf der VorrichtungsNetzwerkkonfiguration. Um unerwartetes Verhalten zu vermeiden, identifizierenen Sie die Vorrichtung nicht als beide Netzarten.
3
If the switch is set to use a ZigBee network, the EUID, Gateway, and ZigBee channel
number are displayed. This screen has these menu options:
•
•
4
Identify: When identifying the switch in Composer, press this button.
Back: Returns to the Network Configuration screen.
If the switch is set to use an Ethernet network, the MAC address, method of obtaining a
network IP address, the device’s IP address, Subnet Mask, and Gateway are displayed.
The Audio Matrix Switch, by default, uses DHCP to obtain a network IP address.
If the local area network does not support DHCP, you can configure the switch to use a
Static IP address instead:
The front display lets you set or change audio source routing and change zone settings for
volume, bass, treble, and mute. The display also shows the current source and zone activity.
a
Press the Select dial to enter edit mode.
b
Press the Down or Up button (or rotate the Select dial) to choose Static IP.
a
Press OK (or press the Select dial).
b
Press Save (or press the Select dial).
This device operates as part of the Control4 home system, which requires physical and logical connections to function as designed.
1
2 3
1.
2.
3.
4.
Connect input and output devices
Connect to the network and power
Set up logical connections
Static IP modifications
This section describes, in general terms, how to set up physical connections required for the
Audio Matrix Switch and all associated devices. Refer to any device-specific documentation
for additional installation instructions.
To set up the logical connections required, refer to Control4 Composer Pro User Guide for
details.
Connect Input and Output Devices
1.
2.
4
Network Configuration
Front Display
Essential setup tasks include:
3
So far you have set up the physical connections for the Control4 Audio Matrix Switch. To
complete the logical setup, trained installers must use a PC connected (and with Control4
Composer software installed) to the home network. If you are a trained Control4 installer,
refer to the Control4 Composer Help file.
The best method of initially setting up system routing for the Audio Matrix Switch is using
Composer Pro. You can also make adjustments from the front display.
Buttons— For choosing options or
menus displayed in the front panel user
interface.
2
Set Up Logical Connections
Physical and logical connections are required in order to control, navigate, and use the
Audio Matrix Switch as designed.
Audio Outputs
2
1
If you are using an Ethernet connection for the Audio Matrix Switch, plug the data
cable from the home network connection into the Audio Matrix Switch RJ-45 port
(labeled Ethernet) and the network port in your wall or at the network hub or switch.
Connect the power cord provided into the back of the Audio Matrix Switch and to the
power outlet. When the power cord is connected, the Audio Matrix Switch should
power up.
The system automatically creates generic source names displayed in the front of the device.
To change these names, you must update your system using Composer Pro. For more
information, refer to the documentation that shipped with your Control4 Controller or contact
your Control4 Installer or Reseller.
Set Up the Audio Matrix Switch
Back Panel
2.
Each of the 16 signal sensing analog audio inputs (the RCA style ports) is labeled
1-16 for each individual source.
Front Display— For displaying or setting audio switch settings and navigating
system menus.
Select Dial— For scrolling through and
selecting screen elements or options
displayed in the LCD.
1.
Input Power Requirements
1
3
Connect to the Network and Power
Connect audio source devices (such as CD Changers or players, tuners, iPods, or
tape players) you want included in the system to the Audio In jacks.
Connect amplifiers or amplified speakers as needed to the Audio Out jacks.
5
Edit the IP, Mask, and Gateway fields for the Static IP network: Use the Select dial to
select a line, and then press the dial.
WARNING! Do not expose the apparatus to dripping or splashing. Do not place
objects filled with liquids near the apparatus.
AVERTISSEMENT ! N’exposez pas l’appareil à l’égoutture ou à l’éclaboussement.
Ne placez pas les objets remplis de liquides près de l’appareil.
WARNING! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus. Setzen
Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat gefüllt werden.
Audio Matrix Switch
Installation and Setup Guide
WARNING! To reduce the risk of fire or electrical shock, do not expose this apparatus
to rain or moisture.
AVERTISSEMENT ! Pour réduire le risque du feu ou de choc électrique, n’exposez
pas cet appareil à la pluie ou à l’humidité.
WARNING! Um die Gefahr des Feuers oder des elektrischen Schlages zu verringern,
setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.
IMPORTANT! Using this product in a manner other than outlined in this document
voids your warranty. Further, Control4 is NOT liable for any damage incurred with the
misuse of this product. See “Limited 2 Year Warranty.”
IMPORTANT ! Employer ce produit en quelque sorte autre que décrit dans ce document vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dommage
encouru avec l’abus de ce produit. Voyez que « a limité la garantie de 2 ans. »
WICHTIG! Das Verwenden dieses Produktes in gewissem Sinne anders als umrissen
in diesem Dokument hebt Ihre Garantie auf. Weiter ist Control4 NICHT für irgendeine
Beschädigung verantwortlich, die mit der Fehlanwendung dieses Produktes genommen wird. Sehen Sie, daß „begrenzte eine 2 Jahr-Garantie.“
Supported Models
•
C4-16S2-E-B Control4® Audio Matrix Switch
Box Contents
•
•
•
Control4 Audio Matrix Switch
IEC Power Cord
Audio Matrix Switch Installation and Setup Guide (this document)
1. Read and keep these instructions.
2. Heed all warnings and follow all instructions for this product in this and other Control4® documents included with or related to this product.
3. Improper use of this product may result in potential electric shock.
4. Do not use this product near water.
5. Never spill liquid of any kind on this product.
6. Clean this product only with a damp or dry cloth. Do not use liquid cleaners or aerosol
cleaners to clean the product.
7. Install this product according to the manufacturer’s instructions.
8. Install this product according to the National Electrical Code ANSI/NFPA 70 and the
prevailing local codes and requirements.
9. This product should be operated with the type of power indicated on the marked label.
If you are not sure of the type of power available, consult your Control4 dealer or local
power company.
10.Slots and openings on a cabinet rack, and components used with this product are provided for ventilation, reliable operation, and protection from overheating of the product.
These slots and openings must not be blocked or covered.
11. This product should never be placed near or over a radiator or heat register, or in a
built-in installation unless proper ventilation is provided.
12.Never push objects of any kind into this product through cabinet slots because they
may touch dangerous voltage points or short out parts that could result in a fire or
electric shock.
13.Only use the attachments and accessories included with this product or recommended
by Control4.
14.Do not allow anything to rest on the power cord. Do not install or place this product
where people will walk on the cord.
15.Do not use extension cords with any products in a Control4 system.
16.If applicable, unplug this product during lightning storms or when unused for long
periods of time.
17.Do not exceed the maximum wire size (if specified) in this guide.
18.This product must be installed by qualified professionals only.
19.Do not attempt to service this product yourself except as noted in this guide. Opening
or removing covers of internal components may expose you to dangerous voltage
points or other risks.
20.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged or frayed in any way; for example, a power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into this product, this
product has been exposed to rain or moisture, this product does not operate normally,
or this product has been dropped.
Ethernet — Ethernet RJ-45 port for a 10/100 MB Ethernet connection.
3
Audio In (Left-Right Pairs) 1-16 — RCA jacks for stereo channel input for up to 16
stereo analog sources.
4
Audio Out (Left-Right Pairs) 1-16 — RCA jacks for stereo channel line output for up to
16 amplifiers.
Product Specifications
Inputs
# of Channels
16 L/R Stereo Pairs
Input Connectors
RCA Jacks
Input Impedance
10 kW typical
Nominal Input Level
-14 dBV
Maximum Input Level
+4 dBV
Outputs
# of Channels
16 L/R Stereo Pairs
Output Connectors
RCA Jacks
Output Impedance
50 W typical
Nominal Output Level
-14 dBV
Maximum Output Level
+4 dBV
ADVERTISSEMENT! L’équipement doit être relié à une sortie de douille de forces à
un raccordement de mise à la terre protecteur.
Available Gain
Mute (-75 dB) to -40 to +8 dB
Treble
-12 to +12 dB, 2 dB steps, High Shelving EQ
Bass
-12 to +12 dB, 2 dB steps, Low Shelving EQ
Balance
L/R
IMPORTANT ! Pour éviter de produire de la chaleur excessive, n’empilez pas les
points de haut-parleur sur l’un l’autre ou tout autre équipement.
WICHTIG! Um übermäßige Hitze zu erzeugen zu vermeiden, stapeln Sie Lautsprecher-Punkte nicht auf einander oder andere Ausrüstung.
Features and Benefits
•
2
Zone (Output) Control
IMPORTANT! To avoid generating excessive heat, do not stack Speaker Points on
top of each other or other equipment.
•
•
•
•
Power Plug Port — For standard IEC cord (included). Supports universal AC input
(100-240 VAC 50/60 Hz).
WARNING! Equipment must be connected to a Mains socket outlet with a protective
earthing connection.
WARNUNG! Ausrüstung muss an einen Hauptleitungseinfaßungsanschluß mit einem
schützenden Erdunganschluß angeschlossen werden.
Important Safety Instructions
1
Switches up to 16 input sources to up to 16 simultaneous output zones.
Adjustable gain, treble, bass, and balance for each zone
Audio sensing on inputs
Device chassis is three standard rack units (RU) tall and rack mountable conforming to
EIA 19” rack standards (5.25” x 17.34” x 14”)
Communicates with control devices via Ethernet 10/100 port and ZigBee (a wireless
standard for mesh-networking).
Backlighting feature turns on with any button push or Select Dial push and stays lit for a
preset time (default is 30 seconds).
Front and Rear Panel Description
Front Panel
Voltage
100-240V~
Frequency
50/60 Hz
Amps
0.12/0.06 Amps
Watts
14.4 Watts
Source Inputs
To set the network configuration:
1
At the In to Out Assignments screen, press the Network button.
2
On the Network Configuration screen, choose an Ethernet or ZigBee network by rotating and pressing the Select dial.
IMPORTANT! When making logical connections in Composer, identify the device as
the network type (Ethernet or Zigbee) that you choose on the device network configuration. To avoid unexpected behavior, do not identify the device as both network
types.
IMPORTANT! En établissant les rapports logiques dans le compositeur, identifiez
le dispositif comme type de réseau (Ethernet ou Zigbee) ce vous choisissent sur la
configuration réseau de dispositif. Pour éviter le comportement inattendu, n’identifiez
pas le dispositif en tant que les deux types de réseau.
WICHTIG! Wenn Sie logische Beziehungen im Komponisten herstellen, identifizierenen Sie die Vorrichtung als die Netzart (Ethernet oder Zigbee) diese Sie wählen
auf der VorrichtungsNetzwerkkonfiguration. Um unerwartetes Verhalten zu vermeiden, identifizierenen Sie die Vorrichtung nicht als beide Netzarten.
3
If the switch is set to use a ZigBee network, the EUID, Gateway, and ZigBee channel
number are displayed. This screen has these menu options:
•
•
4
Identify: When identifying the switch in Composer, press this button.
Back: Returns to the Network Configuration screen.
If the switch is set to use an Ethernet network, the MAC address, method of obtaining a
network IP address, the device’s IP address, Subnet Mask, and Gateway are displayed.
The Audio Matrix Switch, by default, uses DHCP to obtain a network IP address.
If the local area network does not support DHCP, you can configure the switch to use a
Static IP address instead:
The front display lets you set or change audio source routing and change zone settings for
volume, bass, treble, and mute. The display also shows the current source and zone activity.
a
Press the Select dial to enter edit mode.
b
Press the Down or Up button (or rotate the Select dial) to choose Static IP.
a
Press OK (or press the Select dial).
b
Press Save (or press the Select dial).
This device operates as part of the Control4 home system, which requires physical and logical connections to function as designed.
1
2 3
1.
2.
3.
4.
Connect input and output devices
Connect to the network and power
Set up logical connections
Static IP modifications
This section describes, in general terms, how to set up physical connections required for the
Audio Matrix Switch and all associated devices. Refer to any device-specific documentation
for additional installation instructions.
To set up the logical connections required, refer to Control4 Composer Pro User Guide for
details.
Connect Input and Output Devices
1.
2.
4
Network Configuration
Front Display
Essential setup tasks include:
3
So far you have set up the physical connections for the Control4 Audio Matrix Switch. To
complete the logical setup, trained installers must use a PC connected (and with Control4
Composer software installed) to the home network. If you are a trained Control4 installer,
refer to the Control4 Composer Help file.
The best method of initially setting up system routing for the Audio Matrix Switch is using
Composer Pro. You can also make adjustments from the front display.
Buttons— For choosing options or
menus displayed in the front panel user
interface.
2
Set Up Logical Connections
Physical and logical connections are required in order to control, navigate, and use the
Audio Matrix Switch as designed.
Audio Outputs
2
1
If you are using an Ethernet connection for the Audio Matrix Switch, plug the data
cable from the home network connection into the Audio Matrix Switch RJ-45 port
(labeled Ethernet) and the network port in your wall or at the network hub or switch.
Connect the power cord provided into the back of the Audio Matrix Switch and to the
power outlet. When the power cord is connected, the Audio Matrix Switch should
power up.
The system automatically creates generic source names displayed in the front of the device.
To change these names, you must update your system using Composer Pro. For more
information, refer to the documentation that shipped with your Control4 Controller or contact
your Control4 Installer or Reseller.
Set Up the Audio Matrix Switch
Back Panel
2.
Each of the 16 signal sensing analog audio inputs (the RCA style ports) is labeled
1-16 for each individual source.
Front Display— For displaying or setting audio switch settings and navigating
system menus.
Select Dial— For scrolling through and
selecting screen elements or options
displayed in the LCD.
1.
Input Power Requirements
1
3
Connect to the Network and Power
Connect audio source devices (such as CD Changers or players, tuners, iPods, or
tape players) you want included in the system to the Audio In jacks.
Connect amplifiers or amplified speakers as needed to the Audio Out jacks.
5
Edit the IP, Mask, and Gateway fields for the Static IP network: Use the Select dial to
select a line, and then press the dial.
Use the Select dial to scroll the number up or down and edit as needed, and then press
the Select dial to move to the next field within the number.
Configure an Output
To change output source or settings:
1
Regulatory Compliance
On the Output to Input screen, press the Setup button to view the output settings of the
default output screen (which is the last output screen accessed).
IMPORTANT! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
North America
FCC/Industry Canada
FCC ID: R33C416S2EB / IC : R33C416S2EB
6
When you’re finished editing, press Save.
Use Audio Matrix Switch
This section introduces the user interface available to Audio Matrix Switch users and common system tasks you can perform with the Audio Matrix Switch from the front display.
Note: Following initial setup, you may never need to change settings on the Audio Matrix
Switch manually. This device is managed by the Control4 system. The use of this section is
completely optional.
From the output screen, you can: (1) change to another output screen; (2) change the
output settings on the screen; or (3) toggle to the Input Signal Sensing screen.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
2
If the output-specific screen you want to view did not display, use the Select Dial to
highlight and select the output number and then change it.
3
(Optional) Change settings for the current output using the supported ranges:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
•
This device assists in fulfilling a room-specific music request. To play music, use a Navigator
available for the room to choose a specific music source or a device. That device may or
may not need to make use of this switch.
View Output Assignments
When you complete the physical and logical setup tasks, you can view or change setup
configuration in the Audio Matrix Switch front display.
When you power up the Audio Matrix Switch, the following System Status screen appears
momentarily.
The System Status screen is then replaced by the In to Out Assignments screen.
Input: Displays the number of the currently assigned input source and any label
given to the input source. You can change this setting to any available input
sources.
Gain: Supported range: Mute and -44 to +4 dB (default: 0 dB)
Treble: Supported range: -12 to +12 dB (default: 0 dB)
Bass: Supported range: -12 to +12 dB (default: 0 dB)
Balance: Supported range: -50 to +50dB (default: 0 dB)
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canada ICES-003.
4
To toggle to view input signal sensing information, press the Inputs button.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5
To exit the screen, press the Exit button.
Electrical Testing Laboratory (ETL)
6
Rotate the Select Dial to highlight a setting.
7
Press the Select Dial to enter edit mode.
This product has been tested by ETL and has been found to be in compliance
with:UL 60065, CAN/CSA C22.2 No. 60065-03, IEC 60065, 7th Edition.
”Audio, Video and Similar Electrical Apparatus — Safety Requirements”
8
Rotate the dial to change the setting; then press the dial to Save the new setting and
exit edit mode or, to exit without saving, use the Cancel button.
9
Press the Inputs button to go to the Input Signal Sensing screen, or press the Exit button to return to the Output to Input screen.
Check Signal Status
1
From the Output to Input screen, press the Setup button, and then press the Inputs
button to access the Input Signal Sensing screen.
Australia/New Zealand
This product has been tested to the requirements of, and shown to be in compliance with,
the following standards:
•
AS/NZS 4771:2001 +A1 2003
Limited 2-Year Warranty
For complete warranty information, including details on consumer legal rights as well as warranty exclusions, visit www.control4.com/warranty.
Recycling
For information on recycling, please go to www.control4.com/recycling.
When you make an assignment, the screen displays the assignment. For example, Output 1
is mapped to Input 1.
2
On the Input Signal Sensing screen, a shaded circle appears by the device connection
number of any input device with a signal present.
View Network Settings
1
Press Network.
Copyright ©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo
and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in
the United States and/or other countries. All other names and brands may be claimed as the property
of their respective owners. Pricing and specifications are subject to change without notice.
2
From the Network Configuration screen, select Ethernet or Zigbee.
Part Number: 200-00039, Rev D 3/31/2011
3
To return to the Network Configuration screen, press Back.
To view network settings:
Manage Outputs
View Output Assignments
To view output assignments:
1
2
Ensure your Audio Matrix Switch is powered up and that the In to Out Assignments
screen displays in the front display.
Set Front Display Preferences
On the In to Out Assignments screen, view the current input-to-output assignments.
1
The screen consists of 16 output zones and any assigned input source. The shaded arrow
indicates the Output currently selected.
To explore these menu options, press the buttons on the front panel:
•
•
•
Setup: Displays an output-specific screen. The most recent screen accessed is displayed by default, but you can choose to view a different output’s setting by changing
the Output number.
Network: Displays the Network Configuration screen. From this screen, you can
select Ethernet or Zigbee.
Display: Displays the Display Configuration Screen.
About this Document
To set your viewing preferences for the front display:
On the Output to Input screen, press the Display button. The Display Configuration
screen appears.
Use the buttons and/or the Select dial to choose a setting to change: When you press
the Select button (or press the dial), you enter edit mode.
In edit mode, use the buttons or Select dial to change the highlighted setting then press
the OK button (or press the dial) to save the change and exit.
•
•
•
Brightness: Supported range: 0 to 100
Contrast: Supported range: 0 to 100
Backlight Timeout: Supported settings are:
• OFF (always off)
• 1 to 90 seconds (default is 30 seconds)
• ON (always on)
• Reset Defaults: Restores factory defaults.
Use the Select dial to scroll the number up or down and edit as needed, and then press
the Select dial to move to the next field within the number.
Configure an Output
To change output source or settings:
1
Regulatory Compliance
On the Output to Input screen, press the Setup button to view the output settings of the
default output screen (which is the last output screen accessed).
IMPORTANT! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
North America
FCC/Industry Canada
FCC ID: R33C416S2EB / IC : R33C416S2EB
6
When you’re finished editing, press Save.
Use Audio Matrix Switch
This section introduces the user interface available to Audio Matrix Switch users and common system tasks you can perform with the Audio Matrix Switch from the front display.
Note: Following initial setup, you may never need to change settings on the Audio Matrix
Switch manually. This device is managed by the Control4 system. The use of this section is
completely optional.
From the output screen, you can: (1) change to another output screen; (2) change the
output settings on the screen; or (3) toggle to the Input Signal Sensing screen.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
2
If the output-specific screen you want to view did not display, use the Select Dial to
highlight and select the output number and then change it.
3
(Optional) Change settings for the current output using the supported ranges:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
•
This device assists in fulfilling a room-specific music request. To play music, use a Navigator
available for the room to choose a specific music source or a device. That device may or
may not need to make use of this switch.
View Output Assignments
When you complete the physical and logical setup tasks, you can view or change setup
configuration in the Audio Matrix Switch front display.
When you power up the Audio Matrix Switch, the following System Status screen appears
momentarily.
The System Status screen is then replaced by the In to Out Assignments screen.
Input: Displays the number of the currently assigned input source and any label
given to the input source. You can change this setting to any available input
sources.
Gain: Supported range: Mute and -44 to +4 dB (default: 0 dB)
Treble: Supported range: -12 to +12 dB (default: 0 dB)
Bass: Supported range: -12 to +12 dB (default: 0 dB)
Balance: Supported range: -50 to +50dB (default: 0 dB)
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canada ICES-003.
4
To toggle to view input signal sensing information, press the Inputs button.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5
To exit the screen, press the Exit button.
Electrical Testing Laboratory (ETL)
6
Rotate the Select Dial to highlight a setting.
7
Press the Select Dial to enter edit mode.
This product has been tested by ETL and has been found to be in compliance
with:UL 60065, CAN/CSA C22.2 No. 60065-03, IEC 60065, 7th Edition.
”Audio, Video and Similar Electrical Apparatus — Safety Requirements”
8
Rotate the dial to change the setting; then press the dial to Save the new setting and
exit edit mode or, to exit without saving, use the Cancel button.
9
Press the Inputs button to go to the Input Signal Sensing screen, or press the Exit button to return to the Output to Input screen.
Check Signal Status
1
From the Output to Input screen, press the Setup button, and then press the Inputs
button to access the Input Signal Sensing screen.
Australia/New Zealand
This product has been tested to the requirements of, and shown to be in compliance with,
the following standards:
•
AS/NZS 4771:2001 +A1 2003
Limited 2-Year Warranty
For complete warranty information, including details on consumer legal rights as well as warranty exclusions, visit www.control4.com/warranty.
Recycling
For information on recycling, please go to www.control4.com/recycling.
When you make an assignment, the screen displays the assignment. For example, Output 1
is mapped to Input 1.
2
On the Input Signal Sensing screen, a shaded circle appears by the device connection
number of any input device with a signal present.
View Network Settings
1
Press Network.
Copyright ©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo
and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in
the United States and/or other countries. All other names and brands may be claimed as the property
of their respective owners. Pricing and specifications are subject to change without notice.
2
From the Network Configuration screen, select Ethernet or Zigbee.
Part Number: 200-00039, Rev D 3/31/2011
3
To return to the Network Configuration screen, press Back.
To view network settings:
Manage Outputs
View Output Assignments
To view output assignments:
1
2
Ensure your Audio Matrix Switch is powered up and that the In to Out Assignments
screen displays in the front display.
Set Front Display Preferences
On the In to Out Assignments screen, view the current input-to-output assignments.
1
The screen consists of 16 output zones and any assigned input source. The shaded arrow
indicates the Output currently selected.
To explore these menu options, press the buttons on the front panel:
•
•
•
Setup: Displays an output-specific screen. The most recent screen accessed is displayed by default, but you can choose to view a different output’s setting by changing
the Output number.
Network: Displays the Network Configuration screen. From this screen, you can
select Ethernet or Zigbee.
Display: Displays the Display Configuration Screen.
About this Document
To set your viewing preferences for the front display:
On the Output to Input screen, press the Display button. The Display Configuration
screen appears.
Use the buttons and/or the Select dial to choose a setting to change: When you press
the Select button (or press the dial), you enter edit mode.
In edit mode, use the buttons or Select dial to change the highlighted setting then press
the OK button (or press the dial) to save the change and exit.
•
•
•
Brightness: Supported range: 0 to 100
Contrast: Supported range: 0 to 100
Backlight Timeout: Supported settings are:
• OFF (always off)
• 1 to 90 seconds (default is 30 seconds)
• ON (always on)
• Reset Defaults: Restores factory defaults.
">