Juniper M320 Data Sheet

Page 1

Datasheet

M-series

Routing Platforms

Juniper Networks M-series routers deliver the same features and predictable performance across platforms. This consistency accelerates time to revenue, improves cost efficiency while scaling the network, and decreases operational overhead.

“We've offered a very popular residential Metro Ethernet service,

Megapass Ntopia, for the last two years. To support the expansion of

Metro Ethernet to enterprise customers, we selected the Juniper

Networks M-series [platform] for its high performance and strong feature set, including stable and rich MPLS Layer 2 VPN and the quality of service (QoS) control necessary to meet the requirements of businesses..”

Man-joon Ghil

KT

M-series Routing Platforms

Juniper Networks M-series Multiservice Edge platforms are deployed in the world's largest networks delivering advanced IP/MPLS services at scale, enabling service providers to reduce costs through network consolidation while simultaneously generating new revenues. Constructed with a clean separation between control plane, forwarding plane, and services plane, M-series routers support multiple services over any type of access connection without compromise on a single platform - maximizing revenue and minimizing operational and capital costs. These services include a broad array of VPNs, network-based security, real-time voice and video, bandwidth on demand, rich multicast of premium content, IPv6 services, granular accounting and much more. This service portfolio continues to grow with every release of JUNOS software, leveraging the tremendous flexibility and performance headroom of the service-built architecture.

Enhanced for the Edge

The M-series platforms are extremely versatile as they can be deployed at the edge of provider networks, in small and medium cores, and in peering, route reflector, and data center applications. However, recent Mseries platforms innovations have dramatically expanded their edge capabilities by leveraging the highly programmable Internet Processor II ASIC and IP/MPLS-rich JUNOS software. M-series routers are now deployed and scaling services at the edge of some of the world's largest production networks.

Consistent Services to All Customers

The M-series platforms boast a portfolio that spans from 5 Gbps up to 320 Gbps of throughput, including the M7i, M10i, M20, M40e, M160, and M320 platforms. Because the same scalable and productionhardened JUNOS software runs on all M-series platforms, a consistent set of capabilities is available at all network locations regardless of customer connection or serving area density.

Access Agnostic with Leading Density

With its broad interface portfolio, a single M-series platform can provide a single point of edge aggregation for thousands of customers over any access type including ATM, Frame Relay, Ethernet, and TDM as well as at any speed from DS0 up to OC-192/STM-64 and 10 Gigabit Ethernet. Leveraging dense Ethernet and highly channelized interfaces, the M-series platforms boast leading densities for virtually all port types.

Most Comprehensive VPN Portfolio

The M-series platforms also support the industry's most comprehensive VPN portfolio with the ability to simultaneously run and scale Layer 2 virtual circuits, Layer 2 VPNs, Layer 2.5 Interworking VPNs, Layer 3

2547 VPNs, VPLS, IPSec, GRE, IP over IP and other tunneling mechanisms with no performance compromise. This broad set of VPNs meets the needs of the widest possible set of customers, maximizing the service provider's revenue while minimizing required infrastructure. For example, a provider can use

Layer 3 VPNs to deliver an outsourced routing service and can also use Layer 2 VPNs to provide a point-topoint ATM service over a common IP/MPLS infrastructure.

Granular QoS and Statistics

Rich packet processing enables the M-series platforms to support multiple levels of granular QoS per-port, per-logical circuit (DLCI, VC/VP, VLAN), and per-channel (to DS0) for traffic prioritization. These comprehensive QoS functions include classification, rate limiting, shaping, weighted round robin scheduling, strict priority queuing, weighted random early detection, random early detection, and packet marking. For network convergence applications, Layer 2 CoS can be mapped to Layer 3 CoS on a per DLCI, per VP/VC, or per VLAN basis. Simultaneously, extensive statistics can be collected and diagnostics performed at this same level of granularity to enable flexible billing, traffic planning, and rapid troubleshooting.

M-series Routing Platforms

Page 2

Rich Packet Processing

A broad portfolio of services can be layered on top of VPNs for additional revenue generation. A comprehensive suite of multicast capabilities, including multicast over MPLS VPNs, enables efficient distribution of premium content.

Hardware-based IPv6 and a number of IPv6 migration tools such as IPv6 over

MPLS ease access to the benefits of this next-generation IP protocol without performance compromise. NAT and stateful firewall can be configured per VRF to enable network-based security for additional revenues and IPSec can be used to support a premium security service for end users with high security requirements. The M-series Service-Built Edge is continuously enhanced with new packet processing capabilities to ensure maximum revenue generation opportunities.

Highly Reliable

The M-series service-built architecture has been fundamentally constructed with scale and stability in mind, including the modular and fault-protected design of

JUNOS software along with a rigorous system testing process. Furthermore, all

M-series routers offer redundant power and cooling and the M10i, M20, M40e,

M160, and M320 offer fully redundant hardware including redundant Routing

Engines and Switching/Forwarding Engine Boards. JUNOS software features enhance this redundant architecture by enabling non-stop forwarding in the event of a routing engine failure via a Hitless Switchover and when a minor software upgrade is required by supporting In-service Software Upgrades. This functionality augments other high availability capabilities that include graceful protocol routing restart, MPLS fast reroute, VRRP, SONET APS, SDH MSP, BFD, and LACP.

Robust Security

All M-series platforms support highly scalable J-Protect filtering capabilities, unicast reverse path forwarding and high performance rate limiting for industry-leading DOS attack protection. The J-Protect security capabilities of the

M-series platforms can be further enhanced with the Adaptive Services PIC that accelerates, in hardware, additional network-based security services such as high-speed NAT, stateful firewall with attack detection, and J-Flow accounting.

With the rich feature set of JUNOS software combined with industry-leading

ASIC technology, the M-series Service-built Edge provides a new level of reliable and secure service delivery at the edge of service provider networks.

Advantage

Features Benefits Features Benefits

New Service

Models

• Industry's most comprehensive VPN portfolio meets the largest number of customer needs and maximizes provider revenues

• Run Layer 2 Virtual Circuit, Layer 2 VPN, Layer 2.5

Interworking VPNs, Layer 3 2547 VPN, VPLS, IPSec, IP over

IP, GRE simultaneously

• Highly scalable, supporting thousands of VPNs

• Granular QoS with low latency and jitter performance to support voice, video, and other real time applications

• Per DLCI, per VP, per VC, per VLAN, per channel (DS0), and per port QoS

• Classification, rate limiting, shaping, weighted round robin scheduling, strict priority scheduling, weighted random early detection, random early detection, and packet marking

Services

Everywhere

• Mapping Layer 2 (802.1p, CLP, DE) to Layer 3 QoS (IP

DSCP, MPLS EXP)

• Hardware-based IPv6 performance, IPv6 over MPLS, IPv6 over

IPv4 GRE tunnels, and IPv6/IPv4 dual stack functionality

• Robust multicast support including IGMP v1/v2/v3, PIM-SM, PIM-

DM, MLD, SSM, RP, MSDP, BSR, multicast in MPLS/BGP VPNs to support resource-efficient delivery of high-value content

• Network-based security services including NAT and stateful firewall, and NAT and stateful firewall per VRF

• MLPPP, MLFR .15 and MLFR .16, 802.3ad (including LACP) for aggregated links

• J-Flow accounting, source class usage, and destination class usage for flexible billing on a per application or per CoS resource usage basis and for distance-based billing.

• Multivendor network management solution through partnerships

• Industry-leading, XML-based JUNOScript API facilitates third-party and in-house OSS development

More from

Less

Infrastructure

• One feature-rich JUNOS image runs across all M-series platforms, ensuring consistent services and enabling providers to market all services to all users regardless of connection or serving area density

• From the smallest PoPs to the largest PoPs

• Over virtually any access technology including ATM,

FR, Ethernet, and TDM connections

• At any speed from DS0 to OC-192/STM-64

• Lowers operational costs

• Seamless migration to larger platforms to meet network growth

• Service-built architecture provides clean separation between control plane, forwarding plane, and services plane to support multiple services on a single platform

• Maximum revenue with the lowest possible capex and opex

• Consolidate functions previously performed by discrete devices such as NAT, stateful firewall, IPSec, and QoS into a single M-series platform

• Multiple services on a single platform allows customers to trial many different services without capital investment and then to scale successful services to large user populations

• Robust Layer 2 VPNs, Layer 2.5 Interworking VPNs, and

Layer 2 to Layer 3 QoS mapping for transparently consolidating multiple networks to a common IP/MPLS infrastructure

• Logical routers enables providers to segment a router into multiple administrative and routing domains, so that two completely different organization can share infrastructure

Page 3

Datasheet

Advantage

Features Benefits Features

Proven

Dependability

• Production-proven services scaled in the world's largest networks

• Hitless switchover for RE switchover with non-stop forwarding

• In-service Software Upgrades for disruption-free minor upgrades

• MPLS FRR to ensure traffic can quickly reroute around failures

• MPLS TE path control for path optimization combined with predictable performance for latency-sensitive traffic such as voice and video

• Advanced OA&M features such as LSP ping for troubleshooting

MPLS

• IETF Graceful Protocol Restart mechanism for hitless restarts of

IS-IS, BGP, OSPF, OSPFv3, LDP, RSVP, Layer 2 VPN, and Layer 3

VPN

• Modular JUNOS software ensures that a failure of one module does not impact the entire operating system

• User-friendly commands for safely deploying new configurations to live networks and for rolling back to previous working configurations

Secure

Networks

Benefits

• High performance J-Protect NAT, stateful firewall, attack detection, and IPSec via the Adaptive Services PIC

• Separate routing plane and control plane enables stateful firewall protection of the control plane

• J-Flow stateful monitoring of packet flows with standard flowd v5 and v8 records for comprehensive monitoring of the network

• Highly scalable filtering, unicast RPF and rate limiting protects against IP spoofing and DOS attacks

• High performance IPSec and IPSec over MPLS with digital certificate support for an additional layer of security

• Additional ubiquitous security features such as port mirroring, encrypted management session traffic, secure tunneling capabilities, secure remote logins, and configurable privilege levels and user accounts

M-series Routers

Router Aggregate Half-

Duplex Throughput

M7i

M10i

M20

M40e

M320

8.4 Gbps

12.8 Gbps

25.6 Gbps

51.2 Gbps

320 Gbps

FPC Slots & Full

Duplex Throughput per Slot

1 built-in 3.2 Gbps + 1

Gbps FIC 3.5 x 17.5 x

2 built-in 3.2 Gbps

4 FPC slots 3.2 Gbps

8 FPC slots 3.2 Gbps

8 FPC slots 20 Gbps

Size

18 in

8.9 x 44.5 x 45.7 cm

8.5 x 17.5 x 18 in

22.2 x 44.5 x 45.7 cm

14 x 17.4 x 21 in

35.56 x 44.3 x 53.34 cm

35 x 17.4 x 26 in

88.9 x 44.3 x 66.66 cm

34.8 x 17.4 x 25.7 in

88.4 x 44.3 x 65.1 cm

PICs per Chassis

4+2 fixed FE or +1 fixed GE

8

16

32

32

9

5

2

2

Chassis per Rack

Switch Fabric and

Routing Engine

24

Redundancy

No

Yes

Yes

Yes

Yes

M7i Router

The M7i router is Juniper Networks most compact routing platform at 3.5

inches (8.9 cm) in height, supporting 7+ Gbps throughput. It is ideal as an

IP/MPLS provider edge router in small POPs or, with its integrated Adaptive

Services Module supporting hardware-accelerated NAT, stateful firewall, IPSec, and J-Flow accounting, it can be used as a campus border router or as head office customer premise equipment. The M7i supports either 2 fixed Fast

Ethernet ports or 1 fixed Gigabit Ethernet port via a Fixed Interface

Concentrator (FIC) as well as supporting 4 ejector-enabled PICs. It supports interface speeds of up to OC-12c/STM-4 and Gigabit Ethernet. PICs are interchangeable between the M7i and M10i routers.

M10i Router

At only 8.5 inches (22.2 cm) the Juniper Networks M10i router is the company's most compact and cost-effective fully redundant M-series edge router. The M10i boasts fully redundant common hardware components including redundant

Routing Engines, Compact Forwarding Engine Boards, fan trays, and power supplies. Combined with JUNOS reliability features, the M10i router is the product of choice for enabling reliable and secure services in small and medium

PoPs. The M10i supports 8 ejector-enabled PICs via 2 built-in Flexible PIC concentrators and interface speeds up to OC-12/STM-4 and Gigabit Ethernet.

PICs are interchangeable between the M7i and M10i routers.

M-series Routing Platforms

Page 4

M20 Router

Only 14 inches (35.56 cm) in height, the M20 design delivers increased port density, performance of 20+ Gbps throughput, scalability, and reliability in a space-efficient package. The M20 offers fully redundant hardware, including redundant switching fabrics and Routing Engines to increase system availability. The M20 supports 16 PICs and up to OC-48/STM-16 uplink speeds in a compact package ideal for the provider edge in medium and large PoPs.

M40e Router

The M40e router provides a dense, highly redundant platform primarily targeted for dense dedicated access aggregation and provider edge services in medium and large POPs. This 40+ Gbps platform supports 32 ejector-enabled

PICs via 8 FPCs and up to OC-48/STM-16 uplink speeds in a half-rack package.

The M40e offers common hardware redundancy including the switch fabrics,

Routing Engines, fan trays, and power supplies. This platform supports M160

PICs and many PICs are forward-portable to the T-series routing platforms.

M160 Router

The M160 router offers up to 8 OC-192c/STM-64 PICs per chassis (16 per rack) or up to 32 OC-48c/STM-16 PICs per chassis (64 per rack) with up to 160+

Gbps throughput. The M160 platform is ideal for medium-sized backbone cores requiring predictable performance for feature-rich infrastructures and also supports provider edge services in 10-gigabits POPs. In addition, this platform is ideal where switching fabric and Routing Engine redundancy are required. All major components are field replaceable, increasing system serviceability and reliability, and decreasing mean time to repair. For investment protection and smooth migration path, this platform supports M40e PICs. As well, many PICs are forward-portable to the T-series routing platforms.

M320 Router

The M320 is a high performance, 10Gbps-capable, distributed architecture edge router. It offers up to 16 OC-192c/STM-64 PICs per chassis (32 per rack) or up to 64 OC-48c/STM-16 ports per chassis (128 per rack) with up to 320 Gbps throughput. The M320 platform is ideal for medium-sized backbone cores requiring predictable performance for feature-rich infrastructures and also supports provider edge services in 10-gigabit POPs with the ability to support up to 32 type 1 and type 2 PICs and up to 16 type 3 PICs for 10 Gbps uplinks.

In addition, this platform is ideal where switching fabric and Routing Engine redundancy are required. All major components are field replaceable, increasing system serviceability and reliability, and decreasing mean time to repair. PICs are compatible with M40e, M160, T320, and T640.

Key Components

Key components of each M-series router are the Packet Forwarding Engine

(PFE) and the Routing Engine.

• The PFE is a logical entity that is responsible for packet forwarding. It physically consists of the PICs, FPCs, FIC, control/system/forwarding board, and state-of-the-art ASICs

• Physical Interface Cards provide a complete range of fiber optic and electrical transmission interfaces to the network. For a listing of available PICs, see the M-series PICs and FPCs datasheet.

• Flexible PIC Concentrators house PICs and connect them to the rest of the PFE. FPCs parse, prioritize, and queue the packets before forwarding them across the midplane to the appropriate destination interface. On egress, FPCs prioritize, queue, re-assemble, and forward packets out through the appropriate port. Up to four PICs can be mixed and matched within a single FPC slot, increasing configuration flexibility and network scalability, while maximizing POP efficiency.

The FPC required depends on the platform and on the PICs that are needed. For a listing of available FPCs, see the M-series PICs and FPCs datasheet.

• The Fixed Interface Concentrator is available only on the M7i and contains either 2 fixed Fast Ethernet interfaces or 1 fixed Gigabit

Ethernet Interface. The Gigabit Ethernet interface requires Small Form factor Pluggable optics (SFP ordered separately).

• On M7i, M10i, M20, M40e, and M160 platforms, the control/system/forwarding board performs route lookup and switching to the destination FPC. It makes forwarding decisions, distributes data cells throughout memory, processes exception and control packets, monitors system components, and controls FPC resets. There are different names for this component on various platforms:

• M7i/M10i Compact Forwarding Engine Board

• M20 System and Switch Board

• M40e/M160 Switching and Forwarding Module

• M320 uses a distributed architecture, where the PFE is contained entirely within the FPC. Route lookup and packet processing occurs on the ingress PFE, and is then switched across the Switch Interface

Board (switching fabric) to the egress PFE for final route lookup and packet processing. The feature-rich programmable ASICs deliver a comprehensive, hardware-based system for packet processing and support uncompromising 40 Gbps performance per PFE. To ensure a non-blocking forwarding path, all channels between the ASICs and between ingress and egress PFEs are oversized, dedicated paths.

• The feature-rich programmable ASICs deliver a comprehensive, hardware-based system for packet processing. To ensure a nonblocking forwarding path, all channels between the ASICs are oversized, dedicated paths.

• The Routing Engine maintains the routing tables and controls the routing protocols, as well as the JUNOS software processes that control the router's interfaces, the chassis components, system management, and user access to the router

• The Routing Engine processes all routing protocol updates from the network, so forwarding performance is not affected.

• The Routing Engine implements each routing protocol with a complete set of Internet features and provides full flexibility for advertising, filtering, and modifying routes. Routing policies are set according to route parameters, such as prefixes, prefix lengths, and

BGP attributes.

Cable & Wireless will provision new IP capabilities over consumer broadband services using Juniper Networks MPLSbased infrastructure. The delivery of multiple, concurrent IP services will have a positive impact on our total cost of

“

Juniper Networks M-series infrastructure will intelligently speed

IP traffic through our network.

Phil Green

Senior Vice President, Global Operations

Cable & Wireless

Page 5

Datasheet

Specifications

This section lists basic platform specifications. For further details, refer to the hardware installation manuals on www.juniper.net/techpubs/hardware/.

Specification Description

Physical Dimensions

(H x W x D)

Maximum Weight

Mounting

DC System Input

Power (Fully

Loaded)

DC Input Power

Supply (per individual power supply)

Nominal Voltage

Operating Range

M7i M10i M20 M40e M320

3.5 x 17.5 x 18 in

8.9 x 44.5 x 45.7 cm

8.75 x 17.5 x 18 in

22.2 x 44.5 x 45.7 cm

14 x 17.4 x 21 in

35.6 x 44.3 x 53.3 cm

35 x 17.4 x 26 in

88.9 x 44.3 x 73.7 cm

34.8 x 17.4 x 25.7 in

88.4 x 44.3 x 65.1 cm

38.2 lbs / 17.3 Kg 79 lbs / 36 Kg 150 lbs / 68 kg 370.5 lbs / 168 kg 439 / 199.6 kg

Front or center

10 A at –48 VDC

378 watts

Front or center

12 A at –48 VDC

576 watts

Front or center

24 A at -48 VDC

1,200 watts

Front or center

54 A at -48 VDC

2,600 watts

Front or center

65 A at -48 VDC

3,150 watts

-48, -60 VDC

-42 to -72 VDC

-48, -60 VDC

-42 to -72 VDC

-48, -60 VDC

-42 to -72 VDC

-48, -60 VDC

-42 to -72 VDC

-48, -60 VDC

-42 to -72 VDC

Power

Current Rating

378 watts

10 A at –48 VDC

576 watts

12 A at –48 VDC

1,200 watts

24 A at -48 VDC

3,150 watts

65 A at -48 VDC*

2,000 watts

42A at -48 VDC

AC System Input

Power (Fully

Loaded)

AC Input Power

Supply (per individual power supply)

# of power supplies required (nonredundant/ redundant)

1/2

Operating Range

4 to 2 A

100 to 240 VAC

47 to 63 Hz

400 watts

100, 120, 200, 208,

220, 240 VAC

100, 120, 200, 208,

220, 240 VAC

90 to 264 VAC

2/4

8 to 4 A

100 to 240 VAC

47 to 63 Hz

800 watts

90 to 264 VAC

1/2

12 to 6 A

200 to 240 VAC

47 to 63 Hz

1,950 watts

100, 120, 200, 208,

220, 240 VAC

90 to 264 VAC

1/2

15 to 13 A

200 to 240 VAC

47 to 63 Hz

3,000 watts

200, 208, 220,

240 VAC

180 to 264 VAC

Power

Current Rating

400 watts

4 to 2 A

100 to 240 VAC

800 watts

8 to 4 A

100 to 240 VAC

1,200 watts

12 to 6 A

100 to 240 VAC

3,000 watts

16 A

200 to 240 VAC

# of power supplies required (nonredundant/ redundant)

1/2 2/3 1/2 1/2

* The M40e router does not require circuit breakers greater than 60 A, and does not draw greater input current than 54 A.

* The depth of all chassis are measured from the front flange to the rear of the product. Please add 4-6" for cables and airflow clearance.

2/4

17 A to 14 A

200 to 240 VAC

47-63 Hz

3,500 watts

200, 208, 220, 240 VAC

180 to 264 VAC

1,750 watts

10 to 8.5 A

200 to 240 VAC

3/4

M-series Routing Platforms

Page 6

Forwarding and

Switch Interface

Boards

M7i, M10i CFEB

Compact Forwarding Engine Board

• M7i router

• 8.4 Gbps throughput rate (4.2-Gbps full duplex)

• Optional Adaptive Services Module

• M10i router

• 12.8-Gbps throughput rate (6.4-Gbps full duplex)

• Does not support Adaptive Services Module

• 266-MHz CPU and supporting logic

• Internet Processor II-based ASIC for 16-Mpps packet lookup

• Two enhanced I/O Manager ASICs

• Parsing, prioritizing, and queuing of packets

• 4-MB parity-protected SSRAM per I/O Manager ASIC

• 8-MB SSRAM for forwarding tables associated with

ASICs

• 200 ms of delay-bandwidth buffering

• Two 512-KB boot flash EPROM (programmable on the board)

M20 SSB

System and Switch Board

• 25.6-Gbps throughput (12.8-Gbps full duplex)

• One Internet Processor II ASIC for 40-Mpps packet lookup

• Two Distributed Buffer Manager ASICs for coordinating pooled, single-stage buffering

• 33-MHz PCI bus, which connects the PowerPC 603e processor and the Internet

Processor II ASIC

• 512-KB boot flash EPROM (programmable on the board)

• Optional redundancy

• 16-MB Version

• PowerPC 603e processor running at 266 MHz for handling exception packets

• 16-MB SSRAM

• 256-MB DRAM

M40e SFM

Switching and Forwarding Module

• 51.2-Gbps throughput (25.6-Gbps full duplex)

• One Internet Processor II ASIC for 40-Mpps aggregate packet lookup

• Two Distributed Buffer Manager ASICs for coordinating pooled, single-stage buffering

• 256-KB parity-protected Level 2 cache

• Optional redundancy

• 16-MB Version

• PowerPC 603e processor running at 266 MHz

• 16-MB parity-protected SSRAM

• 256-MB parity-protected DRAM

M320 SIB

Switch Interface Board for interconnecting FPCs

• Four required per M320 chassis; all four active

• 80-Gbps throughput per SIB, 320 Gbps throughput per system

• Processor subsystem 300-MHz CPU

• System controller

• 256-MB DRAM

• Two Fast Ethernet interfaces

FPC

M20

• 3.2-Gbps full-duplex throughput per FPC

• Enhanced I/O Manager ASIC

• Parsing, prioritizing, and queuing of packets

• 2-MB parity-protected SSRAM per I/O Manager ASIC

• 200 ms of delay-bandwidth buffering per FPC

M320

• 4-Gbps full-duplex throughput per M320-FPC1

• 16-Gbps full-duplex throughput per M320-FPC2

• 20-Gbps full-duplex throughput per M320-FPC3

• Layer 2 / Layer 3 Packet Processing ASICs

• Switch Interface ASICs

• Internet Processor ASICs

• Memory subsystem, including Queuing and Memory Interface

ASICs

• Processor subsystem

M40e

• 3.2-Gbps full-duplex throughput per M40e-FPC, M40e-FPC1, and M40e-FPC2

• Two Packet Director ASICs for dispersing and balancing packets across the enhanced

I/O Manager ASICs

• Two enhanced I/O Manager ASICs

• Parsing, prioritizing, and queuing of packets

• 2-MB parity-protected SSRAM per I/O Manager ASIC

• 200 ms of delay-bandwidth buffering per FPC

Page 7

Datasheet

Routing Engine 400 MHz (M7i, M10i)

• 400-MHz Celeron processor with default 256-KB Level 2 cache

• 256-MB SDRAM DIMMs, upgradeable to 512-MB or 768-MB SDRAM in

256-MB increments

• 20-GB IDE hard drive for secondary storage

• Fast Ethernet RJ-45 port for out-of-band management

• Two RS-232 (DB-9 connector) asynchronous serial ports for console and remote management

• Backup boot media

• Optional PCMCIA card adapter and 256-MB compact flash card

1.6 GHz (M320)

• 1.6-GHz Pentium IV processor with integrated 256-KB Level 2 cache

• 2-GB DRAM

• 256-MB Compact flash drive for primary storage

• 30-GB IDE hard drive for secondary storage

• 10/100 Base-T autosensing RJ-45 Ethernet port for out-of-band management

• Two RS-232 (DB9 connector) asynchronous serial ports for console and remote management

• Optional redundancy

600 MHz (M20, M40e)

• 600-MHz Intel Pentium III

• Memory

• M20, M40e: 2-GB ECC DRAM

• 256-MB flash drive for primary storage

• 30-GB IDE hard drive for secondary storage

• Tertiary storage

• M20, M40e: 128-MB flash PC card

Control Systems M40e, M160

Miscellaneous Control Subsystem

• 19.44-MHz stratum 3 reference clock for PICs

• Controller to monitor the status of router components

Agency Approvals Safety

• CAN/CSA-C22.2 No. 60950-00/UL 60950—Third Edition, Safety of

Information Technology Equipment

• EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification,

Requirements and User's Guide

• EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre

Communication Systems

• EN 60950 Safety of Information Technology Equipment

EMC (M7i, M10i)

• AS/NZS 3548 Class B (Australia / New Zealand)

• BSMI Class B (Taiwan)

• EN 55022 Class B Emissions (Europe)

• FCC Part 15 Class B (USA)

• VCCI Class B (Japan)

M320

Control Board

• Provides buses and control processors used for chassis management

• 10/100Base-T/TX Ethernet switch for intermodule communication

• Processor subsystem

• Two external clock inputs for 19.44-MHz stratum 3 reference clock

• Optional redundancy

EMC (M20, M40e, M160, M320)

• AS/NZS 3548 Class A (Australia / New Zealand)

• BSMI Class A (Taiwan)

• EN 55022 Class A Emissions (Europe)

• FCC Part 15 Class A (USA)

• VCCI Class A (Japan)

Immunity

• EN 61000-3-2 Power Line Harmonics

• EN 61000-4-2 ESD

• EN 61000-4-3 Radiated Immunity

• EN 61000-4-4 EFT

• EN 61000-4-5 Surge

• EN 61000-4-6 Low Frequency Common Immunity

• EN 61000-4-11 Voltage Dips and Sags

ETSI

• ETS-300386-2 Telecommunication Network Equipment Electromagnetic

Compatibility Requirements

Environment

NEBS

M7i, M10i, M20, M40e: Compliant

M320: Designed to meet these standards

• GR-63-Core: NEBS, Physical Protection

• GR-1089-Core: EMC and Electrical Safety for Network

Telecommunications Equipment

• SR-3580 NEBS Criteria Levels (Level 3 Compliance)

Temperature

• 32 to 104 degrees F / 0 to 40 degrees C

Relative Humidity

• 5 to 90 percent noncondensing

Maximum Altitude

• No performance degradation to 10,000 ft / 3,048 m

Seismic / Earthquake

• Designed to meet Telecordia Technologies Zone 4 earthquake requirements

Page 8

Ordering Information

This section lists only the base units and basic options. Note, PICs are not included as part of the base units and must be ordered separately. For PIC ordering information, see the PICs datasheets at www.juniper.net. For further details on bundles, options, and spares, contact your nearest Juniper Networks sales representative

Component Description

Base Unit DC chassis

AC chassis

System

Switching and

Forwarding

Boards

Primary

8-MB DRAM

Redundant

8-MB DRAM

Adaptive Services

Module Option

Primary

16-MB DRAM Option

Redundant

16-MB DRAM Option

M320 Switch

Interface Board

Flexible PIC

Concentrator

FPC

FPC1

FPC2

FPC3

Routing Engine 400 MHz256 MB

Redundant

400 MHz 256 MB

600 MHz 512MB

600 MHz 2 GB

Redundant

600 MHz 2 GB

1.6 GHz 2 GB

Redundant

1.6 GHz 2 GB

Control Board Primary

MCS

JUNOS

Software

Redundant

Redundant

USA

Worldwide

M7i

M7iBASE-DC-2FETX or

M7iBASE-DC-1GE

M7iBASE-AC-2FETX or

M7iBASE-AC-1GE

In base bundle

—

FEB-M7i-SVCS-BB

—

—

—

Built into chassis

—

—

—

In base bundle

—

—

—

—

—

—

—

—

—

JUNOS

JUNOS-WW

M10i

M10iBASE-DC

M10iBASE-AC

In base bundle

FEB-M10i-M7i-R

—

—

—

—

Built into chassis

—

—

—

In base bundle

RE-400-256-R

—

—

—

—

—

—

—

—

JUNOS

JUNOS-WW

FPC-E

—

—

—

—

—

—

In base bundle

RE-600-2048-R

—

—

—

—

—

JUNOS

JUNOS-WW

Model Number

M20

M20BASE-DC

M20BASE-AC

In base bundle

SSB-E-M20

—

SSB-E-16-M20

SSB-E-16-M20

—

M40e

M40eBASE-DC

M40eBASE-AC

In base bundle

SFM-R

—

SFM-16-BB

SFM-16-R

—

M40e-FPC-S

M40e-FPC1

M40e-FPC2

—

—

—

—

In base bundle

RE-600-2048-R

—

—

—

—

MCS-R

JUNOS

JUNOS-WW

M320

M320BASE-DC

M320BASE-AC

—

—

—

—

—

4 included in base bundle

—

M320-FPC1

M320-FPC2

M320-FPC3

—

—

—

—

—

Included in base bundle

RE-1600-2048-R

Included in base bundle

CB-M-R

—

JUNOS

JUNOS-WW

CORPORATE HEADQUARTERS

AND SALES HEADQUARTERS

FOR NORTH AND SOUTH AMERICA

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, CA 94089 USA

Phone: 888-JUNIPER (888-586-4737) or 408-745-2000

Fax: 408-745-2100 www.juniper.net

EAST COAST OFFICE

Juniper Networks, Inc.

10 Technology Park Drive

Westford, MA 01886-3146 USA

Phone: 978-589-5800

Fax: 978-589-0800

ASIA PACIFIC REGIONAL

SALES HEADQUARTERS

Juniper Networks (Hong Kong) Ltd.

Suite 2507-11, Asia Pacific Finance Tower

Citibank Plaza, 3 Garden Road

Central, Hong Kong

Phone: 852-2332-3636

Fax: 852-2574-7803

EUROPE, MIDDLE EAST, AFRICA

REGIONAL SALES HEADQUARTERS

Juniper Networks (UK) Limited

Juniper House

Guildford Road

Leatherhead

Surrey, KT22 9JH, U. K.

Phone: 44(0)-1372-385500

Fax: 44(0)-1372-385501

Copyright © 2005 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, NetScreen, NetScreen Technologies, the

NetScreen logo, NetScreen-Global Pro, ScreenOS, and GigaScreen are registered trademarks of Juniper Networks, Inc. in the United States and other countries.

The following are trademarks of Juniper Networks, Inc.: ERX, E-series, ESP, Instant Virtual Extranet, Internet Processor, J2300, J4300, J6300, J-Protect,

J-series, J-Web, JUNOS, JUNOScope, JUNOScript, JUNOSe, M5, M7i, M10, M10i, M20, M40, M40e, M160, M320, M-series, MMD, NetScreen-5GT,

NetScreen-5XP, NetScreen-5XT, NetScreen-25, NetScreen-50, NetScreen-204, NetScreen-208, NetScreen-500, NetScreen-5200, NetScreen-5400,

NetScreen-IDP 10, NetScreen-IDP 100, NetScreen-IDP 500, NetScreen-Remote Security Client, NetScreen-Remote VPN Client, NetScreen-SA 1000

Series, NetScreen-SA 3000 Series, NetScreen-SA 5000 Series, NetScreen-SA Central Manager, NetScreen Secure Access, NetScreen-SM 3000,

NetScreen-Security Manager, NMC-RX, SDX, Stateful Signature, T320, T640, T-series, and TX Matrix. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. All specifications are subject to change without notice.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

100042-012 Feb 2005