Schlage AD-300 BlackBoard SA3000 Wieg Wiring Diagram
Below you will find brief information for door controller SA3000 MASTER CONTROLLER, door controller SA3000 DOOR CONTROLLER, lock AD300, power supply PIB300-2D. The illustrated wiring diagram is for a door controller in a security system. It details the wiring of the SA3000 Master Controller, the SA3000 Door Controller, the AD300 Electric Lock, and the PIB300-2D Power Supply. With this wiring diagram, you can wire your security system components properly and ensure the proper operation of your system.
Advertisement
Advertisement
Advertisement
Key features
SA3000 Master Controller
SA3000 Door Controller
AD300 Electric Lock
PIB300-2D Power Supply
Wiring diagram
Security system
Door controller
Wiegand
RS485
Frequently asked questions
The SA3000 Master Controller supports up to 8 AD400 locks on TS3.x or Universal Edition or up to 1 AD400 lock on Unix Edition.
Use Belden 9843x2 or equivalent cable for the RS485 line.
Place the ground shield on the Belden 9843 RS485 line at one location only.
The SA3000 Door Controller will support a single AD300 or WR1.
Use Belden 88103 or equivalent cable if plenum rated cable is required.
UL 294 power supplies used should not bond earth ground to signal ground.