Omega CN77PC Owner Manual

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, Inc. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from the date of purchase. OMEGA Warranty adds an additional one (1) year product warranty to cover handling and shipping time. This ensures that OMEGAÕs customers receive maximum coverage on each product.

If the unit should malfunction, it must be returned to the factory for evaluation.

OMEGAÕs Customer Service Department will issue an Authorized Return

(AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective it will be repaired or replaced at no charge. OMEGAÕs WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of being damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGAÕs control. Components which wear are not warranted, including but not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its v a r i o u s p r o d u c t s . H oweve r, O M E G A n e i t h e r a s s u m e s responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with infor mation provided by OMEGA, either verbal or written. OMEGA war rants only that the par ts manufactured by it will be as specified and free of defects.

O M E G A M A K E S N O OT H E R W A R R A N T I E S O R

REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED

OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED

W A R R A N T I E S I N C LU D I N G A N Y W A R R A N T Y O F

M E RC H A N TA B I L I T Y A N D F I T N E S S F O R A PA RT I C U L A R

P U R P O S E A R E H E R E B Y D I S C L A I M E D. L I M I TAT I O N O F

LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a ÒBasic ComponentÓ under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, or used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic

WARRANTY / DISCLAIMER language, and additionally purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.

RETURN REQUESTS / INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer

Service Department. BEFORE RETURNING ANY PRODUCT(S) TO

OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)

NUMBER FROM NEWPORTÕS CUSTOMER SERVICE DEPARTMENT (IN

ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

FOR WARRANTY RETURNS, please have the following information available BEFORE contacting

OMEGA:

1. P.O. number under which the product was PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the product.

FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:

1. P.O. number to cover the COST of the repair,

2. Model and serial number of product, and

3. Repair instructions and/or specific problems relative to the product.

OMEGAÕs policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.

OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

© Copyright 1999 OMEGA ENGINEERING, INC. All rights reserved.

This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of OMEGA ENGINEERING, INC.

PATENT NOTICE: This product is covered by one or more of the following patents: U.S. Patents Des. 336,895; 5,274,577 / FRANCE Brevet No. 91 12756 /

SPAIN 2039150; 2048066 / U.K. Patent No. GB2 248 954; GB2 249 837 / CANADA

2052599; 2052600 / ITALY 1249456; 1250938 / GERMANY DE 41 34398 C2. USED

UNDER LICENSE. Other US and International Patents pending or applied for.

MQS3481/1099

QUICK

START

MICROMEGA

¨

CN77PC PROGRAMMING BOX

OMEGAnet ¨ On-Line Service Internet e-mail www.omega.com [email protected]

USA:

Canada:

Servicing North America:

One Omega Drive, P.O. Box 4047

ISO 9001 Certified Stamford, CT 06907-0047

TEL: (203) 359-1660 e-mail: [email protected]

976 Bergar

Laval (Quebec) H7L 5A1

TEL: (514) 856-6928 e-mail: [email protected]

FAX: (203) 359-7700

FAX: (514) 856-6886

For immediate technical or application assistance:

USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA ¨

Customer Service: 1-800-622-2378 / 1-800-622-BEST ¨

Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN ¨

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

Mexico : TEL: (001)800 TC-OMEGA ¨ FAX: (001)203-359-7807 e-mail: [email protected]

Benelux:

Servicing Europe:

Postbus 8034, 1180 LA Amstelveen, The Netherlands

TEL: +31 (0)20 6418405 FAX: +31 (0)20 6434643

Toll Free in Benelux: 0800 0993344 e-mail: [email protected]

Czech Republic: RudŽ arm‡dy 1868, 733 01 Karvin‡ 8

TEL: +420 (0)69 6311899 e-mail: [email protected]

FAX: +420 (0)69 6311114

France: 9, rue Denis Papin, 78190 Trappes

TEL : +33 (0)130 621 400

Toll Free in France: 0800406342 e-mail: [email protected]

FAX: +33 (0)130 699 120

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

TEL : +49 (0)7056 9398-0 FAX: +49 (0)7056 9398-29

Toll Free in Germany: 0800-TC-OMEGA ¨ e-mail: [email protected]

United Kingdom: One Omega Drive

ISO 9002 Certified River Bend Technology Centre

Northbank, Irlam

Manchester M44 5EX, United Kingdom

TEL: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622

Toll Free in the UK: 0800 488 488 e-mail: [email protected]

START HERE

Using This Quick Start Manual

Use this Quick Start Manual to set up your programming box and begin operation.

Information is provided on how to:

¥ Connect communication cable

¥ Installing the meter

¥ Loading software

For complete information on all setup options, see the OperatorÕs Manual.

Before You Begin

In addition to the programming box and the related parts, you will need the following items to set up your meter:

¥

¥ ac power, as listed on meterÕs ID/Power Label

1 Ú

8

Ó flat blade screwdriver

Installing the Meter

1. Connect cable to programming box and to an available computer communications port (DB connector).

2. Plug in programming box to ac power source.

3. Turn on power. Internal safety switch will shut off power to connectors when meter is removed.

4. Load software: Insert disk 1, open and select

SETUP.EXE then follow on-screen instructions.

5. Install meter into programming box.

6. Make sure that the plug-in unit is CE version.

2

Figure 2 Rear View

Figure 3 Exploded View

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply.

OMEGA is constantly pursuing certification of its products to the European New Approach Directives.

OMEGA will add the CE mark to every appropriate device upon certification.

This device is marked with the international hazard symbol. It is important to read the Setup

Guide before installing or commissioning this device as it contains important information relating to safety and EMC.

WARNING: These products are not designed for use in, and should not be used for, patient connected applications.

The information contained in this document is believed to be correct but OMEGA Engineering, Inc.

accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.

TRADEMARK NOTICE:

, omega.com

¨ are trademarks of OMEGA Engineering, Inc.

Figure 1 Front View