advertisement
LaCie LaCinema Rugged
User Manual
Table of Contents
page 1
Table of Contents
LaCie LaCinema Rugged
User Manual
Table of Contents
page 2
LaCie LaCinema Rugged
User Manual
Copyrights
Copyright © 2008 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of LaCie.
Trademarks
Apple, Mac, and Macintosh are registered trademarks of Apple Inc. Microsoft, Windows 98, Windows 98 SE,
Windows 2000, Windows Millennium
Edition, Windows XP and Windows Vista are registered trademarks of Microsoft
Corporation. Other trademarks mentioned in this manual are the property of their respective owners.
Changes
The material in this document is for information only and subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy,
LaCie assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. LaCie reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes.
Canada Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
FCC Statement
LaCie LaCinema Rugged
Tested to comply with FCC standards for home or office use
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following conditions:
1. The devices may not cause harmful interference
2. The devices must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
❖ Reorient or relocate the receiving antenna.
Introduction
page 3
❖
❖
❖
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications to this product not authorized by LaCie could void the FCC &
Industry Canada regulations and negate your authority to operate the product.
Manufacturer’s Declaration for CE Certification
We, LaCie, solemnly declare that this product conforms to the following European standards: Class B EN60950,
EN55022, EN55024, EN61000-3-2:
2000, EN61000-3-3: 2001
With reference to the following conditions: 73/23/EEC Low Voltage Directive; 89/336/EEC EMC Directive
CAUTION: Modifications not authorized by the manufacturer may void the user’s authority to operate this device.
LaCie LaCinema Rugged
User Manual
Introduction
page 4
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designed collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the
Health and Safety Precautions
❖ Only qualified persons are authorized to carry out maintenance on this device.
❖ Read this User Manual carefully and follow the correct procedure when setting up the device.
❖ Do not open a disk drive or attempt to disassemble or modify it. Never insert any metallic object into the drive to avoid any risk of electrical shock, fire, short-circuiting or dangerous emissions. The disk drives
General Use Precautions
❖ Do not expose the LaCie LaCinema
Rugged to temperatures outside the range of 5° C to 30° C (41° F to 86°
F); or to operational humidity beyond
5-80%, non-condensing, or non-operating humidity beyond 10-90%, noncondensing. Doing so may damage the LaCie LaCinema Rugged or disfigure its casing. Avoid placing your LaCie LaCinema Rugged near a source of heat or exposing it to sunlight (even through a window). Inversely, placing your LaCie LaCinema Rugged in an environment that is too cold or humid may damage the unit.
❖ Always unplug the LaCie LaCinema time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
shipped with your LaCie LaCinema
Rugged contain no user-serviceable parts. If it appears to be malfunctioning, have it inspected by a qualified
LaCie Technical Support representative.
❖ Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing liquids on the LaCie
LaCinema Rugged, as they may spill into its openings. Doing so increases the risk of electrical shock,
CAUTION: The LaCie LaCinema Rugged’s warranty may be void as a result of the failure to respect the precautions listed above.
short-circuiting, fire or personal injury.
❖ Make sure that the computer and
LaCie LaCinema Rugged are electrically grounded. If the devices are not grounded, there is an increased risk of electrical shock. Power requirements 100-240 V~, 1.5 A,
60-50 Hz, (Supply voltage fluctuations not exceeding ± 10% of the nominal, transient over-voltages according to over-voltage category
II).
Rugged from the electrical outlet if there is a risk of lightning or if it will be unused for an extended period of time. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire.
❖ Use only the power supply shipped with the device.
❖ Do not place objects on top of the
LaCie LaCinema Rugged or use excessive force on it.
❖ Never use excessive force on your
LaCie LaCinema Rugged. If you detect a problem, see the Troubleshooting section in this manual.
CAUTION: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception.
It is essential that only the supplied power cord be used.
LaCie LaCinema Rugged
User Manual
Operating Environment Temperatures
❖ Do not expose the LaCie LaCinema Rugged to temperatures outside the range of 5° C to 30° C (41° F to 86° F). As high end audio/video appliance, the LaCie LaCinema Rugged has been designed with an efficient ventilation system. Allow
5 cm of clearance for airflow on all sides of the LaCinema
Rugged to prevent overheating. See Fig. A.
❖ Do not stack the LaCie LaCinema Rugged on another audio/video appliance such as a TV, VCR or DVD player.
Other audio/video appliances require sufficient airflow and carry the same precautions of use. See Fig. B.
ImpOrTANT INfO: Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no circumstances will LaCie be held liable for the recovery or restoration of this data. To help prevent the loss of your data, LaCie highly recommends that you keep TWO copies of your data; one copy on your external hard disk, for instance, and a second copy either on your internal hard disk, another external hard disk or some other form of removable storage media. LaCie offers a complete line of CD and DVD drives. If you would like more information on backup, please refer to our website.
ImpOrTANT INfO: 1GB = 1,000,000,000 bytes. 1TB =
1,000,000,000,000 bytes. Once formatted, the actual available storage capacity varies depending on operating environment (typically 5-10% less).
Fig. A
5 cm
Fig. B
5 cm
Introduction
page 5
5 cm
LaCie LaCinema Rugged
User Manual
1. Introduction
Congratulations on the purchase of your new LaCie LaCinema
Rugged! The portable LaCie LaCinema Rugged plugs directly into a wide array of audio/visual equipment for instant playback of stored home movies, music or photos. And with high-quality video and quality audio, there’s no compromise on performance.
To get started, use your Mac or PC to transfer your movies, music and photos to the LaCie LaCinema Rugged. Then, simply connect the LaCie LaCinema Rugged to your TV and use the included remote to easily navigate through the menus to listen to music, view photos or watch movies.
The LaCie LaCinema Rugged allows you to choose from
MPEG-1, MPEG-2 (AVI, VOB, IFO, ISO) and MPEG-4 (AVI,
XviD) video formats for easy playback.
Introduction
page 6
Features
❖ Connect directly to your TV for instant playback of movies, music or photos
❖
❖
Your multimedia on the go: take your movies, photos, and music to your friend’s house or on vacation
Entertainment center for exhibitions and promotions
Quick Links
Click a topic:
❖
❖
Connecting the LaCinema Rugged
❖
LaCie LaCinema Rugged
User Manual
1.1. Minimum System Requirements
Windows Users
❖
❖
500MHz Intel Pentium II processor or later
Windows 2000, XP or Vista
❖
❖
256MB RAM
USB interface port
❖ Internet connection (for downloading updates)
Introduction
page 7
Mac Users
❖
❖
G4 or later, or Intel Core Duo
Mac OS X
❖ 256MB RAM
❖
❖
USB interface port
Internet connection (for downloading updates)
Supported Formats – All Users
Video
❖ MPEG-1
❖ MPEG-2 (AVI, ISO, IFO, VOB)*
❖ MPEG-4 (AVI , XviD)
❖ Supported subtitle format: SUB, SRT,
SMI, SSI
Photo
❖ JPEG (up to 8MP)
❖ BMP
❖ PNG
❖ GIF
Audio
❖ WMA
❖ MP3
❖ MPEG-4 (AAC)
❖ AC3
❖ OGG
Supported Video Outputs:
❖ Composite video: NTSC/PAL
❖ Component video: Analog yPbPr (progressive or interlaced, scalable up to
1920x1080i or 1280x720p)
❖ HDMI (up to 1080i)
Supported Audio Outputs:
❖ Dual Stereo analog audio (left and right)
❖ Optical SPDIF
* Mac OS: DVD Video function is supported via VOB / IFO (Video_TS folder). DVD ISO file size cannot exceed more than 4GB. FAT32 /
MS-DOS file system does not support file sizes higher than 4GB. Do not format in HFS+ file system as it is not supported.
LaCie LaCinema Rugged
User Manual
1.2. Box Content
Your LaCie LaCinema Rugged package contains the system tower and an accessories box containing the items listed below.
1. LaCie LaCinema Rugged
2. Remote control
3. 2 x AAA batteries
4. Video composite + stereo cable
5. HDMI cable
6. USB cable
7. External power supply
8. Quick Install Guide
9. LaCie Utilities CD-ROM (with detailed User Manual and software)
ImpOrTANT INfO: Please save your packaging. In the event that the drive should need to be repaired or serviced, it must be returned in its original packaging.
1.3. Languages
Supported Languages
❖ English ❖ Greek
❖ French
❖ German
❖ Polish
❖ Russian
❖ Italian
❖ Spanish
❖ Portuguese
❖ Swedish
❖ Finnish
❖ Danish
LaCinema Classic
LaCie ‘1-Click’ Backup Software for Mac & Windows
71189
7 07
091
3
Introduction
page 8
LaCinema
R U G G E D
Quick Install Guide
LaCie LaCinema Rugged
User Manual
1.4. Views of the LaCinema
Rugged
1.4.1. Front View
1. Disk status LED – Flickering light indicates disk activity.
2. Infrared receiver – Receives the infrared signal from the remote control. Make sure the receiver is not obstructed.
1.4.2. Rear View
1. Power supply connector
2. USB port
3. Optical Audio S/PDIF
4. Video composite + stereo connector
5. HDMI connector
Fig. 1.4.1
Fig. 1.4.2
Introduction
page 9
LaCie LaCinema Rugged
User Manual
1.5. Cables and Connectors
1.5.1. A/V (Audio/Video) Cables
The A/V cables provide the audio and video signals to your stereo and TV. The LaCie LaCinema Rugged supports the A/V standards shown below:
1. Composite video/stereo audio – This is the most standard video connection (yellow) as well as left (white) and right
(red) stereo audio inputs. If your TV only has a SCART connector, you can purchase an adapter from your local retailer that will allow you to connect the composite video/ stereo audio plugs to the SCART connection.
2. HDMI (High-Definition Multimedia Interface) – This is the best audio/video method for connecting the LaCinema
Rugged to HDTVs.
1.5.2. USB Cable
USB is a serial input/output technology for connecting peripheral devices to a computer or to each other. Hi-Speed USB 2.0 is the latest implementation of this standard, and it provides the necessary bandwidth and data transfer rates to support high speed devices such as hard drives, CD/DVD drives and digital cameras.
Included USB Cable
Your LaCie LaCinema Rugged is shipped with a Hi-Speed USB
2.0 cable, to ensure maximum data transfer performance when connected to a Hi-Speed USB 2.0 port. The cable will also work when connected to a USB port, but drive performance will be limited to USB 1.1 transfer rates.
TeChNICAl NOTe: To achieve Hi-Speed USB 2.0 data transfer rates you need to be connected to a Hi-Speed USB 2.0 host interface. Otherwise, transfer rates will be limited to USB
1.1 speeds.
1
Fig. 1.5.1
2
Introduction
page 10
Hi-Speed USB 2.0 Benefits
❖ Backwards compatibility: Hi-Speed USB 2.0 works with the original USB specifications.
❖ Hot-pluggable: no need to shut down or restart your computer when adding or removing devices.
USB Cable Ends
LaCie LaCinema Rugged
User Manual
2. Uploading Multimedia Files
2.1. Connecting the LaCinema Rugged to Your Computer
1. Connect the USB cable to the LaCinema Rugged and to your computer (Fig. 2.1).
2. If your computer USB port does not provide enough power, you may need to connect the power supply which turns on the LaCinema Rugged.
3. The LaCinema Rugged icon will appear on your computer
(on the desktop for Mac users, and in the My Computer folder for Windows users) after a few seconds.
Proceed to section
2.2. Transferring Files to the LaCinema Rug�
ged .
Fig. 2.1
Uploading Multimedia Files
page 11
LaCie LaCinema Rugged
User Manual
2.2. Transferring Files to the LaCinema Rugged
2.2.1. Uploading Multimedia Files
When the LaCie LaCinema Rugged is recognized by your computer, you can start adding your music, photos and videos. To add files, simply drag and drop the appropriate files and folders.
Organize folders any way you want.
To remove files from their folders, simply drag them to the Trash or the Recycle Bin.
After transferring files, make sure to safely disconnect the LaCinema Rugged and its power supply. For details, see 2.3. Discon�� necting Your LaCie LaCinema Rugged .
ImpOrTANT INfO: If you want to remove files from the LaCie LaCinema Rugged, you must empty the Trash or Recycle Bin after placing the files there. Otherwise, the files will still have a reference and occupy hard drive space.
Fig. 2.2.2
2.2.2. Data File Storage
You can also use your LaCie LaCinema Rugged to store standard data files. Just create a separate folder (such as “Backup”) on the drive for storage and simply drag and drop files into it.
Uploading Multimedia Files
page 12
LaCie LaCinema Rugged
User Manual
2.3. Disconnecting Your LaCie LaCinema Rugged
External USB devices feature “plug & play” connectivity, which means that your drive can be connected and disconnected while the computer is running. To prevent failures, however, it is important to follow these steps when disconnecting your LaCie hard drive.
Windows Users
Uploading Multimedia Files
page 13
Mac Users
1. From the System Tray (located in the lower right-hand side of your screen), click the Eject icon (a small green arrow over a hardware image).
2. A message will appear, listing the devices the Eject icon controls (it should say, “Safely remove...”). Click on the LaCie hard drive in this prompt.
3. This message will appear: “Safe to Remove Hardware”
(or similar). It is now safe to disconnect the device.
1. Drag the LaCinema Rugged drive icon to the trash.
(The icon pictured below is a generic USB device icon.
Your drive may be represented by an icon that looks like the drive itself.)
2. When the icon disappears from the desktop, the drive can be disconnected.
LaCie LaCinema Rugged
User Manual
Connecting the LaCinema Rugged
page 14
3. Connecting the LaCinema Rugged to Your TV
The LaCie LaCinema Rugged can be connected to your television only or to your television and to your stereo.
3.1. Power Connection
Connect the external power supply to the LaCinema Rugged and to a grounded electrical outlet (Fig. 3.1)
3.2. Audio/Video Connection
3.2.1. Composite Video & Stereo Audio
Cable
To connect the LaCinema Rugged to TV via a stereo audio and composite video cable, power on the LaCinema Rugged as de-
scribed in section 3.1. Power Connection
and follow the diagram below.
Fig. 3.1
ImpOrTANT INfO: The LaCie LaCinema Rugged cannot be connected to a TV and computer at the same time.
Fig. 3.2.1
LaCie LaCinema Rugged
User Manual
3.2.2. HDMI Video Cable
To connect the LaCinema Rugged to a TV via HDMI video, power on the LaCinema Rugged as described in section 3.1. Power
Connection and follow the diagram below.
Once connected, press the “gear” button and select the
Video menu in order to adjust, if necessary, the video output resolution of the product to match your TV’s resolution from
720p to 1080p.
TeChNICAl NOTe: By default your LaCinema Rugged is set to Composite Video Out mode (the yellow connector). To switch to HDMI mode, turn on the LaCinema Rugged using the power button on the remote control and then press the Info button.
HDMI
Fig. 3.2.2
Connecting the LaCinema Rugged
page 15
LaCie LaCinema Rugged
User Manual
3.2.3. Optical Connection
The cable allows you to connect the LaCinema Classic to a Digital Audio amplifier. Power on LaCinema Rugged as described in section 3.1. Power Connection and follow the diagram below.
ImpOrTANT INfO: Make sure that you have enabled Digital Audio in the setup menu instead of the default analog audio. See section 5.5.2. TV Mode .
OPTICAL
Fig. 3.2.3
Optical
Connecting the LaCinema Rugged
page 16
LaCie LaCinema Rugged
User Manual
4. Using the Remote Control
Some of the buttons of the remote control have different functions or no function at all depending on the type of file you are viewing. This chapter discusses the button functions for each type of file (movies, photos and music) and battery installation.
4.1. Battery Installation
The remote control uses two AAA batteries. The batteries are not pre-installed, so you will need to install them before you can use the remote control.
To install the batteries:
1. Remove the battery compartment cover.
2. Load the batteries onto the battery compartment. Position the batteries so that the “+” symbols on the batteries face the same direction as the “+” symbols on the battery compartment.
3. Slide the battery compartment cover back into the remote.
ImpOrTANT INfO: If you will not be using the remote control for an extended period of time, LaCie recommends that you remove the batteries.
LaCie LaCinema Rugged Remote Control
page 17
LaCie LaCinema Rugged
User Manual
4.2. Remote Control Key Index
The LaCie LaCinema Rugged’s remote control allows you to control the LaCie LaCinema Rugged while its connected to your TV or home theatre center.
Button
1. Power
2. Next
3. Previous
4. Volume down
5. Volume up
6. Stop
7. Play / Select
8. Direction
9. Home / Now playing
10. Info / contextual menu
11. Pause/play
12. Mute
13. Setup
Function
Power on/off
Skip to next track
Back to previous track
Adjust volume down
Adjust volume up
Stop the current file playback
Play selected file / confirm selection
❖ Right and left buttons: navigate in the menu
❖ Up and down buttons: scroll in the list
Back to main menu / go to “now playing” music track
Display info and on screen menu
Pause playback
Turn off sound output
Enter main set up menu
2
4
6
8
9
10
LaCie LaCinema Rugged Remote Control
page 18
1
3
5
7
11
12
13
LaCie LaCinema Rugged
User Manual
5. Playing Multimedia Files
The following sections provide an overview of the different menu options of the LaCie LaCinema Rugged while it is connected to your TV.
When you first power on the LaCie LaCinema Rugged, the Main
Menu appears after a few seconds. From this menu, you can choose from four different media:
❖ Movies
❖ Music
❖ Photos
❖ All Media
TeChNICAl NOTe: The LaCinema will perform a hard disk scan. The duration of the scan will depend on the number of files on the disk.
Fig. 5
Playing Multimedia Files and Settings
page 19
LaCie LaCinema Rugged
User Manual
5.1. Movies Menu
You can scroll through the menus using the navigation buttons.
To confirm your choice and enter a menu, press the Play button.
This menu will display all of the video files that you have uploaded to your LaCie LaCinema Rugged.
Only files recognized as movie files will be displayed. Music and photo files will not be displayed. To view all file types, select the
Browser menu.
You can scroll through the list of movie files and folders using the
Up and Down buttons, Right button to open a folder and Left to move to upper folder level.
To confirm your choice, press the Play button.
A loading animation will appear while the movie is being analyzed to ensure optimum playback experience.
TeChNICAl NOTe: Movie loading can take up to 15 seconds depending on file length and encoding parameters.
During the file playback, you can retrieve movie information and adjust several playback parameters. Press the i button to display or exit the on-screen menu.
Fig. 5.1-A
Playing Multimedia Files and Settings
page 20
Fig. 5.1-B
LaCie LaCinema Rugged
User Manual
5.1.1. File information
The information screen gives you main movie and playback information.
ImpOrTANT INfO: The LaCie LaCinema Rugged is not designed, intended or may be used to violate any one’s copyright or other IP (Intellectual Property) rights. Each LaCie LaCinema
Rugged user may only use their LaCie LaCinema Rugged in conjunction with materials legally owned or licensed by such user, and only to the extent that such ownership or license rights permit such use.
5.1.2. Auto Bookmark
If a movie has been stopped before its end and is played back again later on, a message will ask whether to resume from the last stop position or to start from the beginning. The last five movies will be kept in memory for future playback resumption.
Playing Multimedia Files and Settings
page 21
LaCie LaCinema Rugged
User Manual
5.2. Music Menu
You can scroll through the menu using the navigation buttons.
To confirm your choice and enter a menu, press the Play button.
This menu will display all of the audio files that you have uploaded to your LaCie LaCinema Rugged. Only files recognized as movie files will be displayed. Movies and photo files will not be displayed. To view all file types, select the Browser menu.
You can scroll through the list of music tracks and folders using the Up and Down buttons, Right button to open a folder and
Left to move to upper folder level. To confirm your choice, press the Play button.
During the file playback, you can adjust several playback parameters. Press the i button to display or exit the on-screen menu.
Screensaver
After one minute of music playback, a screensaver will appear.
Press the Play button to display the Music menu.
Fig. 5.2-A
Playing Multimedia Files and Settings
page 22
Fig. 5.2-B
LaCie LaCinema Rugged
User Manual
5.3. Photos Menu
You can scroll through the menu using the navigation buttons.
To confirm your choice and enter a menu, press the Play button.
This menu will display all of the image files that you have uploaded to your LaCie LaCinema Rugged. Only files recognized as movie files will be displayed. Movies and music files will not be displayed. To view all file types, select the Browser menu.
You can scroll through the list of photos and folders using the
Up and Down buttons, Right button to open a folder and Left to move to upper folder level. To confirm your choice, press the
Play button.
To change the settings of the Photos Menu, please go to the
Settings menu.
5.4. File Browser Mode
This menu will display all the multimedia files (not categorized by Movies, Music, etc.) that you have up loaded to your LaCie
LaCinema Classic.
You can scroll through the menu using the navigation buttons.
To confirm your choice and enter a menu, press the Play button.
You can scroll through the list of photos and folders using the
Up and Down buttons, Right button to open a folder and Left to move to upper folder level. To confirm your choice, press the
Play button.
Fig. 5.3-A
Fig. 5.3-B
Playing Multimedia Files and Settings
page 23
Fig. 5.4
LaCie LaCinema Rugged
User Manual
5.5. Setup Menu
The LaCie LaCinema Rugged Setup menu will help you to properly configure and customize your device.
Scroll through the Setup menu using the Up and Down buttons.
To display the available options of a setup category, press the
Right button. To confirm your choice, press the Play button. All changes are automatically saved.
Press the Setup button to display the main menu on the screen.
When the setup menu is shown, the playback will be automatically paused.
Press the Up and Down buttons to select the desired setup, then press the Play button to confirm. Press the Left and Right buttons to select the submenu, then press Play .
To select another option, press the Left button to go back to an previous menu. Press the Setup button again to exit the setup menu from the screen.
5.5.1. Audio Out
Analog – Select Analog if your LaCie LaCinema Rugged is connected to a standard TV set or stereo with the red and white analog audio connectors.
Digital – Select Digital if your LaCie LaCinema Rugged is connected to an audio system with the optical or coaxial connector.
Playing Multimedia Files and Settings
page 24
Fig. 5.5.1
LaCie LaCinema Rugged
User Manual
5.5.2. TV Mode
❖ NTSC C/SVhs (NTSC Composite, S-Video): TV method in
America, Korea, Japan
❖ PAL C/SVhs (PAL Composite, S-Video): TV method in European countries
❖ HDTV/480p – Component(YpbPr) Out: This is for HD TV that supports this connection.
❖ HDTV/720p – Component(YpbPr) Out: This is for HD TV that supports this connection.
❖ HDTV/1080i – This is for HDTV that supports this connection.
5.5.3. TV Type
❖ 4 : 3 Letterbox : Select this option when using a standard
4:3 TV. When you play a widescreen (letterbox) movie, there will be margins on the upper and lower sides of the screen.
❖ 4 : 3 Pan & Scan : Select this option when using a standard
4:3 TV. The picture will be adjusted to the height of the screen.
❖ 16 : 9 Wide : Select this option when using a widescreen
16:9 TV.
5.5.4. Other Settings
❖ Slideshow Delay Time : Set interval between slide changes from 5 seconds to 60 seconds.
continued on the next page
Fig. 5.5.2
Fig. 5.5.3
Playing Multimedia Files and Settings
page 25
Fig. 5.5.4-A
LaCie LaCinema Rugged
User Manual
❖ Slideshow Effect :
• Fade – Current picture fades out, and next picture is fades in.
• Off – No transition effect between pictures.
❖ Subtitle Color : Set color of subtitles to white, yellow or green.
❖ Subtitle Font Size and Subtitles Off
• Large – Subtitle size is set as large.
• Small – Subtitle size is set as small.
• Off – No subtitles displayed.
continued on the next page
Fig. 5.5.4-B
Playing Multimedia Files and Settings
page 26
Fig. 5.5.4-C
Fig. 5.5.4-D
LaCie LaCinema Rugged
User Manual
❖ Language Selection : Change the system language to
English, French, Italian, German or Spanish. Select Eastern
Europe to show system language in English and with subtitles in East European languages.
❖ Auto Run :
• File – Plays the selected song only.
• File (Repeat) – Plays back the selected song repeatedly.
• Folder – Plays back all files in the selected folder in sequence.
• Shuffle – Plays back all files in the selected folder randomly.
• My Music – Without TV, all music files in the ‘mymusic’ folder are played back automatically after booting up again.
❖ Osd Background :
• Default – Use the original background.
❖ Factory Reset : Select On to reset the LaCie LaCinema
Rugged to all default factory values.
Fig. 5.5.4-E
Playing Multimedia Files and Settings
page 27
Fig. 5.5.4-F
Fig. 5.5.4-G
LaCie LaCinema Rugged
User Manual
5.6. Firmware Update
The LaCie LaCinema Rugged allows you to update its firmware by loading downloaded firmware updates in the Update folder.
To update the firmware:
1. Go to www.lacie.com/support and click on the Downloads link.
2. Select the most recent LaCinema Rugged firmware download. Connect your LaCinema Rugged to your computer.
Drag the firmware file you just downloaded into the Update folder on the LaCinema Rugged. Disconnect the LaCinema
Rugged from your computer and connect it to your TV.
3. Go to Browser view from the main menu.
4. Select the Update folder and press the OK button to open it.
5. Select ‘ lacieLaCinema Ruggedfw.bin’ file and press the OK button. The firmware update will begin.
6. When the firmware update is completed at 100% and shows
“Power Off Player …” (Fig. 5.6), power off LaCie LaCinema
Rugged by disconnecting the AC adapter jack on the back of the product.
7. Reconnect the power jack and power on the LaCie LaCinema Rugged to restart the product using the new firmware.
CAUTION: Never turn off the LaCie LaCinema Rugged during the Firmware Update process! Doing so may damage your device. If, for any reason, the procedure fails (e.g. a power failure occurs during the update), you may not be able to use your LaCie LaCinema Rugged. Please contact your reseller or
LaCie Customer Support for more information.
Fig. 5.6
Playing Multimedia Files and Settings
page 28
LaCie LaCinema Rugged
User Manual
Reformatting the LaCinema Rugged
page 29
6. Reformatting the LaCie LaCinema Rugged
6.1. Windows Users
ImpOrTANT INfO: The drive should not be reformatted to a file system other than FAT32 or NTFS. If the drive is formatted in a different format (such as HFS+), files will NOT appear on your television screen. For details, see 1.4. Views of the
LaCinema Rugged .
The process of formatting a drive on a computer running Windows 2000, Windows XP or Windows Vista consists of two steps:
(1) installing a signature on the drive, and (2) formatting the drive. These steps will erase anything that is on the disk.
CAUTION: Following these steps will erase everything from the LaCinema Rugged. If you have information that you want to protect or continue to use, back up this information before performing these steps.
1. Connect the drive to the computer via the interface port.
2. Right-click My Computer and select Manage.
3. From the “Computer Management” window, select Disk
Management (located below the Storage group). See Fig.
6.1-A.
4. If the “Initialize and Convert Disk Wizard” window appears, click Cancel.
5. Windows will list the Hard Disks that are installed on the system. Locate the drive that is represented by the icon.
Right-click the icon and select Initialize.
6. In the box to the right that says Unallocated, right-click and select New Partition…
7. On the first page of the “New Partition Wizard,” click Next.
See Fig. 6.1-A.
continued on next page...]
Fig. 6.1-A
Fig. 6.1-B
LaCie LaCinema Rugged
User Manual
8. Click Next.
9. Click Next.
10. Click Next.
11. Click Next.
12. On the Format Partition window, select Quick Format.
Click Next.
ImpOrTANT INfO: The drive should not be reformatted to a file system other than FAT 32. If the drive is formatted in a non-FAT32 format (such as HFS+), files will NOT appear on your television screen.
13. Click Finish to begin the formatting process.
14. Windows Disk Management will format and partition the disk according to your settings (Fig. 6.1-D.), and your drive will appear in My Computer, ready to use.
Fig. 6.1-C
Reformatting the LaCinema Rugged
page 30
Fig. 6.1-D
LaCie LaCinema Rugged
User Manual
6.2. Mac Users
CAUTION: Following these steps will erase everything from the LaCinema Rugged. If you have information that you want to protect or continue to use, back up this information before performing these steps.
ImpOrTANT INfO: The drive should not be reformatted to a file system other than FAT32 or NTFS. If the drive is formatted in a different format (such as HFS+), files will NOT appear on your television screen. For details, see 1.4. Views of the
LaCinema Rugged .
1. Connect the drive to the computer and turn on the drive.
2. Select Utilities from the Go menu in the Finder menu bar.
3. In the Utilities folder, double-click Disk Utility.
4. The Disk Utility window will open. Select the volume labeled
LaCie Hard Disk from the list of available hard disks on the left side of the window.
5. Select the Partition tab.
6. From the Volume Scheme: menu, choose the number of partitions you want to divide the drive into (Mac OS X gives you the option of dividing the drive into at most 16 partitions). You can adjust the size of each partition using the slide bar between the partitions in the Volume Scheme: area.
7. In the Volume Information section, enter a name for each volume (partition), choose the volume format.
8. Once you have finalized the volume options, click Partition. Click Partition again when the alert message appears to continue.
9. Mac Disk Utility will format and partition the disk according to your settings, and your drive will be ready to use.
Fig. 6.2
Reformatting the LaCinema Rugged
page 31
LaCie LaCinema Rugged
User Manual
7. Technical Information
7.1. XviD Compatibility
The LaCie LaCinema Rugged is fully compatible with the XviD format (an ISO, MPEG-4 compliant video codec), and can play any video encoded with this compression format.
7.2. Optimizing Data Transfers
Data transfers are the flow of data that accomplishes a task, usually related to moving data from storage to computer RAM, or between storage devices. With external drives, such as the LaCie
LaCinema Rugged, the data is transferred from the drive to the computer via the USB interface. The data is fed from the drive through the USB port on the drive, and passes to the computer through the USB host-bus adapter interface.
USB
To utilize the enhanced Hi-Speed USB 2.0 performance, your computer must be equipped with a Hi-Speed USB 2.0 host bus adapter card (either sold separately, or integrated by your computer’s manufacturer) and the appropriate drivers. These host bus adapter cards, which include one or more USB ports, are shipped with special Hi-Speed USB 2.0 drivers that enable the computer to control the card. These drivers must be installed in order for USB 2.0 devices connected to the port to work at their correct speeds.
Computers running Windows XP and Windows Vista automatically manage Hi-Speed USB 2.0 devices and drivers, while Windows 98 SE and Windows Me will require that drivers be installed before a Hi-Speed USB 2.0 device is attached.
Mac OS 9.x does not support Hi-Speed USB 2.0 functionality, and all Hi-Speed USB 2.0 devices will only operate at the original USB specifications. Mac OS 10.2.7 and later supports
Hi-Speed USB 2.0. Contact your LaCie reseller or LaCie Customer Support for information about Hi-Speed USB 2.0 PCI or
PC Cards, or visit our Web site: www.lacie.com
.
Technical Information
page 32
LaCie LaCinema Rugged
User Manual
8. Troubleshooting
Troubleshooting
page 33
If your LaCie LaCinema Rugged is not working correctly, please refer to the following checklist to determine the source of the problem.
If you have gone through all of the points on the checklist and your
LaCinema Rugged still does not work properly, please check the FAQs that are regularly published on our website – www.lacie.com. One of these FAQs may provide an answer to your specific question. You can also visit the downloads page, where the most recent software updates will be available.
If you need further assistance, please contact your LaCie reseller
or LaCie Customer Support (see section 9. Contacting Customer
Manual Updates
LaCie strives to give you the most up-to-date, comprehensive user manuals available on the market. It is our goal to provide you with a friendly, easy-to-use format that will help you quickly install and utilize the many functions of your new device.
If your user manual does not reflect the configuration of the product you purchased, please check our website for the most current version of the user manual.
www.lacie.com
8.1. Troubleshooting: Mac Users
Problem
The drive is not recognized by the computer.
Question
Does an icon for the drive appear on the desktop?
Answer
There should be an icon for the LaCie drive on the desktop. If the drive does not appear, follow the rest of the Troubleshooting tips to isolate the problem.
See section
1.1. Minimum System Requirements
for more information.
Does your computer’s configuration meet the minimum system requirements for use with this drive?
Is the drive’s power supply connected?
Did you follow the correct installation steps for the specific interface and operating system?
Are both ends of the USB cable securely attached?
Make sure that the power supply is properly connected (see section
2.1. Connecting the LaCinema Rugged to Your Computer ) and that the
outlet the power supply is connected to is working.
Review the installation steps in section
.
Only use a USB cable provided by LaCie. Check both ends of the USB cable to make sure they are fully seated in their respective ports. Try disconnecting the cables, waiting 10 seconds, and then reconnecting them. If the drive is still not recognized, restart your computer and try again.
Contact LaCie Technical Support for help.
Is there a conflict with other device drivers or extensions?
Does your computer’s operating system support the file system?
Check your computer’s documentation and see section
7. Reformat� ting the LaCinema Rugged
for more information.
LaCie LaCinema Rugged
User Manual
Troubleshooting
page 34
Problem
Error messages under
Mac OS 10.x.
Question
Did you get an “Error –50” message while copying to a FAT 32
(MSDOS) volume?
The drive is not running noticeably faster when connected via
Hi-Speed USB 2.0.
Are you operating in Mac OS 9.x?
Is the drive connected to a standard USB port on your computer?
Is the drive connected to a Hi-
Speed USB 2.0 port on your computer?
Does your computer or operating system support Hi-Speed USB 2.0?
Answer
When copying files or folders from Mac OS 10.x to a FAT 32 volume, file names with certain characters cannot be copied. These characters include, but are not limited to:
? < > / \ :
Check your files and folders to ensure that these types of characters are not being used.
Apple does not support the Hi-Speed USB 2.0 standard under Mac
OS 9.x. You will be limited to the slower transfer rates of the original
USB standard. For more information, please see section
7.4. Optimiz� ing Data Transfers
.
If your drive is connected to a standard USB port, this is normal. A
Hi-Speed USB 2.0 device can only operate at Hi-Speed USB 2.0 performance levels when it is connected directly to a Hi-Speed USB
2.0 port. Otherwise, the Hi-Speed USB 2.0 device will operate at the slower USB transfer rates. For more information, please see sections
7.4. Optimizing Data Transfers and
.
Check to see that the Hi-Speed USB 2.0 drivers for both your host bus adapter and device have been installed correctly. If in doubt, un-install the drivers and re-install them. Also, make sure that you are connected directly to a Hi-Speed USB 2.0 port on your computer.
See sections
and
for more information.
8.2. Troubleshooting: Windows Users
Problem
The drive is not recognized by the computer.
Question
Has the drive been formatted?
Does your computer’s operating system support the file system?
Is there an icon for the drive in
My Computer?
Does your computer’s configuration meet the minimum system requirements for use with this drive?
Answer
Make sure that the drive has been formatted properly. Please see section
7. Reformatting the LaCinema Rugged
.
Check your computer’s documentation and see section 6. Reformatting the LaCinema Rugged.
Go into My Computer and look for an icon and drive letter assigned to the LaCie drive. If the drive does not appear, follow the rest of the
Troubleshooting tips to isolate the problem. Go into My Computer and look for an icon and drive letter assigned to the LaCie drive. If the drive does not appear, follow the rest of the Troubleshooting tips to isolate the problem.
See section 1.1. Minimum System Requirements for more informa-
tion.
LaCie LaCinema Rugged
User Manual
Troubleshooting
page 35
Problem
The drive is not recognized by the computer.
Question
Is the drive’s power supply connected?
Answer
Make sure that the power supply is properly connected (see section
2.2. Connecting the LaCinema Rugged to Your Computer
) and that the outlet the power supply is connected to is working.
Review the installation steps in section 2.2. Connecting the LaCinema
Did you follow the correct installation steps for the specific interface and operating system?
Are both ends of the USB cables firmly attached?
Check both ends of the USB cable to make sure they are fully seated in their respective ports. Try disconnecting the cables, waiting 10 seconds, and then reconnecting them. If the drive is still not recognized, restart your computer and try again.
Contact LaCie Technical Support for help.
The drive is not running noticeably faster when connected via Hi-Speed
USB 2.0.
Is there a conflict with other device drivers or extensions?
Is the drive connected to a standard USB port on your computer?
Is the drive connected to a
Hi-Speed USB 2.0 port on your computer?
If your drive is connected to a standard USB port, this is normal. A
Hi-Speed USB 2.0 device can only operate at Hi-Speed USB 2.0 performance levels when it is connected directly to a Hi-Speed USB
2.0 port. Otherwise, the Hi-Speed USB 2.0 device will operate at the slower USB transfer rates. For more information, please see sections
7.4. Optimizing Data Transfers and
.
Check to see that the Hi-Speed USB 2.0 drivers for both your host bus adapter and device have been installed correctly. If in doubt, uninstall the drivers and re-install them. Also, make sure that you are connected directly to a Hi-Speed USB 2.0 port on your computer.
The LaCie LaCinema Rugged will not work properly when connected to a hub.
See sections 1.1. System Requirements and
for more information.
Does your computer or operating system support Hi-Speed USB
2.0?
8.3. Troubleshooting: TV/Stereo Connection
Problem
Checking the firmware version.
Question
How do you know which firmware version your LaCie LaCinema Rugged is using?
How do you get new firmware, and how do you install it?
Answer
To check which firmware is currently installed on your LaCie LaCinema Rugged, attach it to your TV and use the remote control to navigate to the Settings menu. The firmware version is displayed in the upper left corner of the Settings menu.
For a detailed explanation, please see section 5.5. Firmware Update or go to www.lacie.com
.
LaCie LaCinema Rugged
User Manual
Troubleshooting
page 36
There is no picture being displayed.
The picture is in black and white or there is no picture being displayed.
Are all of the cables connected correctly?
Is the LaCie LaCinema Rugged’s
Video setting correctly set?
Ensure that all of the cables are connected correctly. If you are using the Composite A/V cable, make sure that the component cable is not plugged in at the same time. See section 4. Connecting The LaCie
LaCinema Rugged to Your TV and Stereo .
In the event that there is an error with the Video setting, press the i button on the remote control until the correct image is displayed. After the picture is being displayed, go into the Settings menu and select Video
Settings . From there, you can select the correct settings. For more information, please see section 4.2.1. Functions of the Basic Buttons .
Optimizing video connections.
There is no sound when connecting the LaCie LaCinema Rugged to a digital stereo.
Viewing photos.
What connectivity method will produce the best quality?
Have the Audio Settings been adjusted?
Does it take several seconds to load a picture?
For optimal quality and performance, the best video connection is the HDMI cable (included). For more information, please contact your LaCie reseller or LaCie Customer Support.
When using the A/V cable to connect the LaCie LaCinema Rugged to a TV, go into the Settings menu and select Audio Settings. From this menu, you will need to select the Analog option instead of Digital.
Depending on file size, photos may take several seconds to load properly. Reducing the photo’s resolution will reduce the file size, as well, and allow the file to load faster.
LaCie LaCinema Rugged
User Manual
Contacting Customer Support
page 37
9. Contacting Customer Support
Before You Contact Technical Support
1.
Read the manuals and review section 8. Troubleshooting
.
2. Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached.
If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can’t get your LaCie drive to work properly, contact us at www.lacie.com
. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand:
Information
1. LaCie hard drive serial number
3. Macintosh/PC model
4. Operating system version
5. Processor speed
6. Computer memory
7. The brands and models of other internal and external peripherals installed on your computer
Where to Find Information
Located on a sticker at the back of drive or on the original packaging
Mac users: Click on the Apple icon in the menu bar and select About
This Mac.
Windows users: Right click My Computer and select Properties >
General.
Mac users: Click on the Apple icon in the finder bar and select About
This Mac. Select More Info... The Apple System Profiler will launch and will list your internal and external peripherals.
Windows users: Right click My Computer and select Properties >
Hardware.
LaCie LaCinema Rugged
User Manual
Contacting Customer Support
page 38
9.1. LaCie Technical Support Contacts
LaCie Asia, Singapore, and Hong Kong
Contact us at: http://www.lacie.com/asia/contact/
LaCie Belgium
Contact us at: http://www.lacie.com/be/contact/ (Français)
LaCie Denmark
Contact us at: http://www.lacie.com/dk/contact
LaCie France
Contact us at: http://www.lacie.com/fr/contact/
LaCie Italy
Contact us at: http://www.lacie.com/it/contact/
LaCie Netherlands
Contact us at: http://www.lacie.com/nl/contact/
LaCie Spain
Contact us at: http://www.lacie.com/es/contact/
LaCie Switzerland
Contact us at: http://www.lacie.com/chfr/contact/ (Français)
LaCie Ireland
Contact us at: http://www.lacie.com/ie/contact/
LaCie International
Contact us at: http://www.lacie.com/intl/contact/
LaCie Australia
Contact us at: http://www.lacie.com/au/contact/
LaCie Canada
Contact us at: http://www.lacie.com/caen/contact/ (English)
LaCie Finland
Contact us at: http://www.lacie.com/fi/contact/
LaCie Germany
Contact us at: http://www.lacie.com/de/contact/
LaCie Japan
Contact us at: http://www.lacie.com/jp/contact/
LaCie Norway
Contact us at: http://www.lacie.com/no/contact/
LaCie Sweden
Contact us at: http://www.lacie.com/se/contact
LaCie United Kingdom
Contact us at: http://www.lacie.com/uk/contact
LaCie USA
Contact us at: http://www.lacie.com/contact/
LaCie LaCinema Rugged
User Manual
10. Warranty Information
LaCie warrants your drive against any defect in material and workmanship, under normal use, for the period designated on your warranty certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its option, repair or replace the defective drive.
This warranty is void if:
❖ The drive was operated/stored in abnormal use or maintenance conditions;
❖ The drive is repaired, modified or altered, unless such repair, modification or alteration is expressly authorized in writing by LaCie;
❖ The drive was subjected to abuse, neglect, lightning strike, electrical fault, improper packaging or accident;
❖ The drive was installed improperly;
❖ The serial number of the drive is defaced or missing;
❖ The broken part is a replacement part such as a pickup tray, etc.
❖ The tamper seal on the drive casing is broken.
LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused as a result.
Warranty Information
page 39
LaCie will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited to, damage or loss of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or inconvenience caused by service interruptions.
Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no circumstances will LaCie be held liable for the recovery or restoration of this data.
Under no circumstances will any person be entitled to any sum greater than the purchase price paid for the drive.
To obtain warranty service, call LaCie Technical Support. You will be asked to provide your LaCie product’s serial number, and you may be asked to furnish proof of purchase to confirm that the drive is still under warranty.
All drives returned to LaCie must be securely packaged in their original box and shipped with postage prepaid.
ImpOrTANT INfO: Register online for free technical support: www.lacie.com/register
LaCie LaCinema Rugged
User Manual
11. Glossary
480p – Also known as 480 progressive, this is a form of standard-definition digital television (SDTV) which is similar to
VGA computer displays. A DVD’s resolution is 480p, but this resolution can only be seen when the DVD player outputs a progressive-scan signal, and the television has progressive-scan or component-video inputs.
720p – Also known as 720 progressive, this is one of two formats designated as a high-definition digital television (HDTV),
ATSC DTV standard. This technology uses progressive scanning and is comprised of 720 vertical pixels by 1,280 horizontal pixels.
1080i – Also known as 1080 interlaced, this is the second of two formats designated as a high-definition digital television
(HDTV), ATSC DTV standard. This technology uses interlaced scanning and is comprised of 1,080 vertical pixels by 1,920 horizontal pixels.
AC3 (Audio Coding 3) – This is an advanced audio compression technology that allows encoding of six separate channels at a bit rate of 448kbits/s.
AVI (Audio Video Interleave) – A file format that can contain audio/video compressed standards using different combinations of codecs (e.g. DivX® video file and a WMA audio file).
DivX® – A video codec developed from the new MPEG-4 compression standard, which allows for compression/decompression of videos into a specified format. The DivX® codec can play movies using any DivX®-enabled player, such as the
LaCie LaCinema Rugged. DivX® movies offer better compression and higher quality than standard MPEG movies.
DTS – Digital sound technology, which provides the technology for virtually all movie soundtracks.
Firmware – Permanent or semi-permanent instructions and data programmed directly into the circuitry of a programmable read-only memory or an electronically-erasable, programmable read-only memory chip. Used for controlling the operation of
Glossary
page 40
the computer or tape drive. Distinct from the software, which is stored in random access memory and can be altered.
ID3 Tag – An embedded tag in MP3 files that communicates a song’s title, artist and album. These tags can be edited.
MPEG (Motion Picture Experts Group) – These are the developers of the MPEG-1 (VideoCDs), MPEG-2 (DVDs and
SuperVCDs) and MPEG-4 (DivX®, WMV) video compression standards. The MPEG group is also responsible for the development of the MP3 and AAC audio compression standards.
NTSC (National Television Standards Committee) – This group is responsible for the development of a set of protocols used for transmission and reception of TV broadcasts in the
United States. An NTSC image has 525 horizontal lines per frame, which are interlaced from left to right, top to bottom.
NTSC signals are not directly compatible with computer systems.
PAL (Phase Alternation Line) – This is the analog TV display commonly used in Europe. The PAL image has 625 horizontal lines per frame, and the color definition differs slightly from the
NTSC standard.
VOB (Video OBjects) – The format in which DVD movies are stored. Within each VOB file, a number of video/audio/subpicture streams are stored. Subpicture streams refer to the subtitles on DVDs and other VOB files. These subtitles are video streams that overlay the main picture stream, and can be turned on or off.
WMA (Windows Media Audio) – An audio format developed by Microsoft® for audio streaming and compression.
XviD – A video codec, very similar to DivX®, based on the
MPEG-4 compression standard. This an open-source video codec that is currently being developed around the world. The
XviD codec can play movies using any XviD-enabled player, such as the LaCie LaCinema Rugged.
advertisement
Related manuals
advertisement