3.2.2. HDMI Video Cable. LaCie 301460KUA, 301459KUA, LaCinema Rugged, LaCinema Rugged Support

LaCie LaCinema Rugged

User Manual

3.2.2. HDMI Video Cable

To connect the LaCinema Rugged to a TV via HDMI video, power on the LaCinema Rugged as described in section 3.1. Power

Connection and follow the diagram below.

Once connected, press the “gear” button and select the

Video menu in order to adjust, if necessary, the video output resolution of the product to match your TV’s resolution from

720p to 1080p.

TeChNICAl NOTe: By default your LaCinema Rugged is set to Composite Video Out mode (the yellow connector). To switch to HDMI mode, turn on the LaCinema Rugged using the power button on the remote control and then press the Info button.

HDMI

Fig. 3.2.2

Connecting the LaCinema Rugged

page 15