NUS Windows 7 Operating System Configuration Guide

 NUS Wireless Network Configuration Guide for Windows 7
1.
From Windows Start > type services.msc in the search box and then press Enter.
2.
Locate WLAN AutoConfig and right-click on it to choose Properties.
NUS Wireless Network Configuration Guide for Windows 7 Page 1 of 11 3.
Change Startup type to Automatic and click Start. Click OK.
4.
From Windows Start > click Control Panel.
NUS Wireless Network Configuration Guide for Windows 7 Page 2 of 11 5.
In Control Panel, click Network and Internet.
If your Control Panel is in classic view, double-click Network and Sharing Center, and
skip to step 7.
NUS Wireless Network Configuration Guide for Windows 7 Page 3 of 11 6.
Click Network and Sharing Center.
7.
From the left, click Manage wireless networks.
8.
Click Add.
NUS Wireless Network Configuration Guide for Windows 7 Page 4 of 11 9.
Click Manually create a network profile.
10.
Enter/select the following settings:

Network name: NUS

Security Type: WPA2-Enterprise

Encryption type: AES

Tick Start this connection automatically

Tick Connect even if the network is not broadcasting
Click Next.
NUS Wireless Network Configuration Guide for Windows 7 Page 5 of 11 11.
Click Change connection settings.
12.
Under Connection tab, tick only the following options:
 Check Connect automatically when this network is in range.
 Check Connect even if the network is not broadcasting its name (SSID)
NUS Wireless Network Configuration Guide for Windows 7 Page 6 of 11 13.
Under Security tab, select the following settings:

Security Type: WPA2-Enterprise

Encryption Type: AES

Tick Remember my credentials for this connection each time I’m logged on.

Choose a network authentication method: Microsoft Protected EAP (PEAP)
Click Settings.
Note: if you are using a common or shared notebook, you should not tick “Remember
my credential for this connection each time I’m logged on”.
NUS Wireless Network Configuration Guide for Windows 7 Page 7 of 11 14.
Select only the following settings:
 Tick Validate server certificate
 Tick Connect to these servers and enter: auth01.nw.nus.edu.sg
 Tick thawte Primary Root CA
 Tick Enable Fast Reconnect
 Select Authentication Method: Secured password (EAP-MSCHAP v2)
Click Configure…
15.
Untick Automatically use my Windows logon name and password (and domain if any)
and click OK.
NUS Wireless Network Configuration Guide for Windows 7 Page 8 of 11 16.
Click OK.
17.
Click Advanced settings.
NUS Wireless Network Configuration Guide for Windows 7 Page 9 of 11 18.
Tick Specify authentication mode and select User or computer authentication.
Click OK.
19.
Click OK.
NUS Wireless Network Configuration Guide for Windows 7 Page 10 of 11 20.
Click the pop up balloon “Additional information is needed to connect NUS.”
21.

Enter your NUSNET Username and Password and click OK.
Username
: (Enter your “Domain\NUSNET Username”)
(E.g. of Domain: NUSSTF/NUSSTU/NUSEXT)
Password
: (Enter your NUSNET Password)

22.
Now you are connected to NUS wireless network. Click Close.
NUS Wireless Network Configuration Guide for Windows 7 Page 11 of 11 ">