NUS Wireless Communication User Manual

 NUS Wireless Network Configuration Guide for Windows 10
1.
Go to Windows 10 Desktop.
2.
Press the Windows key and R key from your keyboard to open “Run”. Enter services.msc
and click OK.
NUS Wireless Network Configuration Guide for Windows 10 Page 1 of 14 3.
Locate WLAN AutoConfig and right-click on it to choose Properties.
NUS Wireless Network Configuration Guide for Windows 10 Page 2 of 14 4.
Change Startup type to Automatic and click Start. Then click OK.
5.
Press Windows key and R key again to open “Run”. Enter control click OK.
NUS Wireless Network Configuration Guide for Windows 10 Page 3 of 14 6.
Click Network and Internet.
7.
Click on Network and Sharing Center.
NUS Wireless Network Configuration Guide for Windows 10 Page 4 of 14 8.
Click Set up a new connection or network.
9.
Choose Manually connect to a wireless network and click Next.
NUS Wireless Network Configuration Guide for Windows 10 Page 5 of 14 10.
Enter/select the following settings:
 Network Name: NUS
 Security Type: WPA2-Enterprise
 Encryption type: AES
 Tick Start this connection automatically
 Tick Connect even if the network is not broadcasting
Click Next.
NUS Wireless Network Configuration Guide for Windows 10 Page 6 of 14 11.
Click Change connection settings.
NUS Wireless Network Configuration Guide for Windows 10 Page 7 of 14 12.
Under Connection tab, tick only the following options:

Connect automatically when this network is in range.

Connect even if the network is not broadcasting its name (SSID)
NUS Wireless Network Configuration Guide for Windows 10 Page 8 of 14 13.
Under Security tab, choose the following settings:
 Security Type: WPA2-Enterprise
 Encryption Type: AES
 Tick Remember my credentials for this connection each time I’m logged on.
 Network Authentication Method: Microsoft Protected EAP (PEAP)
Click Settings.
Note: if you are using a common or shared notebook, you should Uncheck Remember
my credential for this connection each time I’m logged on.
NUS Wireless Network Configuration Guide for Windows 10 Page 9 of 14 14.
Select only the following options:

Tick Verify the server’s identity by validating the certificate

Tick thawte Primary Root CA

Tick Enable Fast Reconnect

Select Authentication Method: Secured password (EAP-MSCHAP v2)
Click Configure.
15.
Untick Automatically use my Windows logon name and password (and domain if any)
and click OK.
NUS Wireless Network Configuration Guide for Windows 10 Page 10 of 14 16.
Click OK.
17.
Click Advanced settings.
NUS Wireless Network Configuration Guide for Windows 10 Page 11 of 14 18.
Tick Specify authentication mode and select User or computer authentication.
19.
Click 802.11 settings tab and tick Enable Pairwise Master Key (PMK) caching
Click OK.
NUS Wireless Network Configuration Guide for Windows 10 Page 12 of 14 20.
Go to the bottom right of your Windows taskbar and click on the wireless icon.
21.
Click on NUS and click Connect.
22.

Enter NUSNET Username and Password and click OK.
Username
: (Enter your “Domain\NUSNET Username”)
(E.g. of Domain: NUSSTF/NUSSTU/NUSEXT)
Password
: (Enter your NUSNET Password)

NUS Wireless Network Configuration Guide for Windows 10 Page 13 of 14 23.
You are now connected to NUS wireless network.
NUS Wireless Network Configuration Guide for Windows 10 Page 14 of 14 ">