Cisco Unified IP Phone 7960G User manual
Cisco Unified IP Phone 7960G is a feature-rich phone that helps you to stay connected and productive. The phone has a large, high-resolution display that makes it easy to see caller ID and other information. It also has a built-in speakerphone so you can make and receive calls hands-free.
Reklam
Reklam
IP Phone System:
Cisco 7960G and 7940G
Table of Contents: IP Phone System 7940G and 7960G
...................................................................................... 2
................................................ 2
............................................................................................ 3
.......................................................................................... 3
.............................................................................................. 5
......................................................................... 5
.................................................................................................. 5
.......................................................................................... 6
.............................................................................................. 7
NNOUNCE A CALL TO ANOTHER EXTENSION
......................................................................... 7
............................................................................................... 7
............................................................................................... 8
................................................................................. 8
............................................................................................ 9
................................................................................................. 9
............................................................................................ 10
.................................................................. 10
................................................................................................. 11
CUSTOMIZE PERSONAL VOICEMAIL GREETINGS AND MESSAGES AND OTHER SETTINGS ...... 12
......................................................... 13
............................................................................. 13
...................................................................................... 13
HONE EXTENSION DISPLAYED ON THE
. ............................................................ 13
. ........................... 13
............................................................. 13
Cisco IP Phone Road Map
Refer to the following illustrations and table to identify the buttons and parts on your Cisco IP
Phone and to find a description of related features.
Cisco IP Phone 7960
1 Handset with indicator light
Functions like a traditional handset.
The light strip at the top of the handset blinks when the phone rings and can be set to remain lit when you receive a voice mail message.
2
LCD screen Displays features such as the time, date, your phone number, caller ID, line/call status and soft key tabs.
Indicates your Cisco IP Phone model. 3 Cisco IP Phone model type
4 Line or speed dial button
Opens a new line or speed dials the number on the LCD screen. Phones in the Cisco IP Phone 7960 series have six line or speed dial buttons and phones in the 7940 series have two.
5 Base adjustment Allows you to adjust the angle of the phone base.
6
Directories button Provides access to call histories
7
? button
8 Settings button
9 Speaker button
Displays help on your LCD screen for a phone button or function
Provides access to phone settings such as contrast and ring sound, network configuration, and status information
Toggles the speaker on or off.
Cisco IP Phone 7940
10 Mute button Toggles the mute on or off.
11 Headset button
12 Volume button
Toggles the headset on or off.
Increases or decreases volume for the handset, headset, or speakerphone
(depending upon which is currently active). Also controls the ringer volume
(if the handset is in its cradle), and the
LCD screen contrast.
Provides access to a message system
Please Note: Button 13 is
NOT active on either the
7940 or 7960 phone..
14 Messages button
15 Navigation button
16 Dial pad
Enables you to scroll through text and select features displayed on the LCD screen
IP Phone System
17 Soft keys
Updated April 2006
Works exactly like the dial pad on a traditional telephone.
Soft keys point to feature options displayed along the bottom of your
LCD screen. Soft keys change depending on the status of your phone.
1
Navigate the Phone system and Use the LCD Screen
Use the Navigation button, the soft keys, and the keypad to make selections:
Soft keys
These will change as menus are selected and either the handset is used or the speakerphone or headset buttons. The soft keys will correspond to the options displayed along the bottom of the LCD screen. Soft keys change depending on the status of your phone. For example, you can see one set of soft key options when you pick up the handset, and another set when the phone is not in use.
The >> soft key allows you to re-position your cursor.
The << soft key allows you to delete a character or digit in an entry.
Press the << soft key or the Delete soft key if you make a mistake or need to edit an entry. The Delete soft key allows you to edit a character or digit--it does not delete the entire entry.
Use the Navigation button
You can choose menu items on your Cisco IP Phone in more than one way:
Press the Navigation button (this is the button with the up and down arrows) to select (or highlight) a menu item. Then press the Select soft key.
Use the Number Keypad
You can press the number on your phone's keypad that corresponds to the item number displayed on the
LCD screen. Use this method to select any menu item that has an item number to the left of it. To enter any letter on your LCD screen, use a corresponding number key. Press the key one or more times to display a particular letter. For example, press the
2 key one time for "a," twice quickly for "b," and three times quickly for "c." After you pause, the cursor automatically advances to allow you to enter the next letter. Press the
<< soft key if you make a mistake.
Customizing Your Cisco IP Phone
Adjust the Vertical Position of the Phone
Use the Base Adjustment lever on the right side of the phone to place phone in vertical position.
Adjust the Volume on Handset or Speakerphone for the Current Call
1.
2.
3.
4.
Pick up the Handset.
Press the Up or Down
Volume button.
Press the Speakerphone button.
Press the Up or Down
Volume button.
Adjust the Volume For All Calls
1.
2.
During a call, press the Up (+) or Down (-) Volume button.
Press the Save soft key to apply the new volume level to future calls.
Adjust the Ringer Volume
Press the up or down Volume button while the handset is in its cradle. Continue to press the Volume button to hear sample rings and to adjust the volume to the desired level. The ringer volume is automatically saved.
IP Phone System Updated April 2006 2
Select the Ring Type
1. Press the Settings button.
2. Press 2 for Ring Type, OR use the Navigation button to scroll to Ring Type and press the
Select soft key.
3. Use the Navigation button to scroll through the list of ring types. Press the Play soft key to hear a sample of the highlighted ring OR press the corresponding number of the ring you want and a sample will play automatically.
4. Once a ring is chosen, either highlight and select with navigation button or press the
number.
5. Press the OK soft key to select your setting OR press Cancel to exit to the previous menu without changing the setting.
6. Press the Exit soft key to return to the main directory menu.
Adjust the Display Contrast
1. Press the Settings button.
2. Press 1 for Contrast OR use the Navigation button to select the contrast soft key.
3. Use the Down or Up soft key OR the volume buttons to change the contrast.
4. Press the Ok soft key to set the desired contrast level.
5. Press the Save soft key to save the setting OR the Cancel soft key to exit to the previous menu without changing the setting.
6. Press the Exit soft key to return to the main directory menu.
Restore Settings or Factory Defaults
1. Press the Settings button.
2. To restore previously saved contrast setting--press the More soft key and then the Restore soft key.
3. Press the Exit soft key.
4. To restore the factory default contrast setting--press the More soft key and then the Default soft key.
5. Press the Exit soft key.
Place a Call
There are several ways to place a call. A call can be placed using the handset, the speakerphone or a headset.
Use the Handset
1.
2.
Lift the handset.
Dial the number using the number keypad.
Multiple Ways to Use the Speakerphone
1.
2.
3.
4.
Dial the number using the number keypad.
Press the Dial soft key.
OR
Press the line button for your extension
Dial the number using the number keypad.
OR
IP Phone System Updated April 2006 3
5.
6.
7.
8.
Press the Speaker button.
Dial the number using the number keypad.
OR
Press the New Call soft key.
Dial the number using the number keypad.
Use a Headset
1.
2.
Dial the number using the number keypad.
Press the Headset button.
Answer a Call
There are several ways to answer a call. A call can be answered using the handset, the speakerphone or a headset. When the light flashes on the hand set or the phone is ringing this indicates an incoming call.
Use the Handset
1. Lift the handset.
Use Speakerphone
1. Press the Answer soft key or the Speaker button.
Use a Headset
1. Press the Headset
button if it is not lit.
2. If the headset button is lit, then press the Answer soft key or the line button of the incoming call.
End a Call
Use the Handset
1. Hang up the handset.
Use a Headset
1. Press the Headset button or the EndCall soft key.
Use the Speakerphone
1. Press the Speaker button or the EndCall soft key.
IP Phone System Updated April 2006 4
Voice Mail Messaging (Cisco Unity)
Initialize Voice Mail/Message Center
Your first step in using Voice Mail is to enroll as a subscriber. The first-time enrollment conversation plays automatically the first time that you call Voice Mail. Listen carefully, and respond as prompted. The recorded instructions guide you as you do the following tasks:
•Record your name.
•Record a greeting that outside callers hear when you do not answer your phone.
•Set a password. (Longer passwords are more secure. Must be at least 3 characters)
1. Press Messages key.
2. Enter temporary password: “12345”.
First voice prompt is to record your name.
3. Say your name slowly and clearly.
4. Press # to accept the recorded name.
Second voice prompt is to either keep the standard greeting or create your own.
5. Create your own greeting if you do no want the standard greeting.
6. Type in your new password and press the # key to accept.
7. Re-enter your password, the same as before, followed by the # key.
These passwords must match.
8. Press Speaker button to end.
Please Note: If you hang up before completing enrollment, none of your changes are saved.
The first-time enrollment conversation plays again the next time you log on to Cisco Unity.
Create a Direct Voicemail Message on an Extension
1. Press the Messages key.
2. Press the # key to bypass the password.
3. Dial the extension.
4. Press # to bypass the greeting, if desired. (Voice Mail will be immediately accesses without any signal.
5. Leave a voicemail message.
6. Hang up.
Listen to New Voicemail Messages
Your phone handset should have a red light indicating that you have at least one new voicemail message.
1. Pick up handset.
2. Press Messages key.
3. Enter your password.
PLEASE NOTE:
If a message has been played and not saved, it will automatically be removed or deleted after 2 weeks, so it is important to save messages that you want to keep.
4. Press 1 to hear the voicemail message or messages. Hang up the handset when finished.
Use this table during message playback as applicable:
Key(s) Task Key(s) Task
2 Save
3 Delete
4 Slow playback
9 Fast-forward
# Fast-forward to end
11.Available on some systems.
## Save as is
IP Phone System Updated April 2006 5
Use the following keys to manage the message after listening to it.
Key(s) Task Key(s) Task
2 Save
3 Delete
4
42
Reply (Resend for
NDRs)
Reply to all the subscriber11.Available on some systems.
6 Save as new (The message waiting indicator (MWI) on your phone may light or remain lit.)
7 Rewind
8
9
#
Deliver an e-mail or fax to a fax machine1
Play message properties
Save as is
Reply to a Voicemail Message
1. Press the Messages key. (speakerphone)
2. Enter your password.
3. Press 1 to listen to new voicemail.
4. After listening to the message, press 4.
5. Record the message. Use the 8 to Pause or resume during message recording.
6. Press # to end recording.
7. Press # to send the message.
Forward a Voicemail Message
1. Press the Messages key. (speakerphone)
2. Enter your password.
3. Press 1 to listen to new voicemail.
4. After listening to the message, press
5.
5. Press the# key twice to bypass the lookup feature.
6. Enter 4 digit extension that is to receive the forwarded message.
7. To record an introduction to the message, press 2.
8. Press the # key to forward the call.
9. Disconnect from Voicemail.
Listen to Old/Saved Voicemail Message
1. Press the Messages key.(speakerphone)
2. Enter your password.
3. Press 3 to review old messages.
4. Press 1 to listen to first saved message.
5. The next message will automatically play.
6. Press the EndCall soft key or Speakerphone button when finished.
IP Phone System Updated April 2006 6
Forward Calls
If you cannot answer your phone or do not wish to be disturbed, call forwarding can be used to have someone else answer your calls or have the calls go directly to voicemail.
Please Note: If there is no answer at the forwarded number, either a person or voice mail, the call will be sent back to your voice mail system.
Forward to Another Extension
1. Press the CFwdAll soft key. You should hear two beeps.
2. Enter the extension to which you want to forward all of your calls.
After you enter the number, an animated phone icon with a flashing right arrow appears in the upper-right corner of the LCD screen. The LCD screen also displays a message confirming the number or extension to which your calls are being forwarded.
Forward Directly to Your Voicemail
1. Press the CFwdALL soft key.
2. Enter 7000.
Cancel Call Forwarding
1. To cancel call forwarding from your phone, press the CFwdAll soft key.
Transfer an Incoming Call
Transfer and Announce a call to another extension
1. During a call, press the
Trnsfer soft key. This puts the call on hold.
2. Dial
the number or office extension to which you want to transfer the call.
3. When it rings on the other end, tell the person that you wish to transfer a call to them. (Announce the call)
4. Press Trnsfer soft key.
5. If you are using a handset, hang up.
Transfer Call to Unattended Phone
1. Press the Transf soft key.
2. Dial the number or office extension to which you want to transfer the call.
3. Transfer person does not pick up phone.
4. If no one answers after 3 rings, press the EndCall soft key.
As an alternative: Before transferring the call, ask the caller if they would like voicemail if the person is not
at their desk. Then simply press the Transf key to send the caller directly into the transfer person’s voicemail after the 3 rd
ring.
5. If the receiver stays on the phone after the third ring, they will automatically go into the transfer person’s voicemail. The receiver is not the person who is trying to contact the transfer person.
6. Press the Resume soft key.
7. Tell the caller the transfer person is not available and ask if they would like to leave a message.
8. Caller wants to leave a voicemail message for transfer person.
9. Press the Transf soft key and hang up.
10. Caller leaves message for transfer person and hangs up phone.
IP Phone System Updated April 2006 7
Transfer Call Directly to Voicemail
1. Press the Transf soft key.
2. Dial extension 7000.
3. Press the # key to bypass the password.
4. Type in the transfer person’s 4-digit extension.
5. Press the Transf soft key.
6. Hang up the phone.
Transfer Call Not Accepted
1. Press the Transf soft key.
2. Dial the number or office extension to which you want to transfer the call.
3. Transfer person answers phone.
4. Receiver announces the person.
5. Transfer person does not want to accept call.
6. Press the EndCall soft key, to disconnect from transfer receiver.
7. Press the Resume soft key to reconnect with original caller.
8. Receiver tells caller that the transfer person is unavailable and offers them voice mail.
Transfer a call when a New Call is Displaying
The screen will highlight the incoming call and show an Answer soft key. Voicemail will activate after 3 rings.
1. Use the Navigation UP arrow key to highlight the active call.
2. The Transf soft key will now display on the LCD screen.
3. Press the Transf soft key.
4. Enter the 4-digit extension.
5. Press the Transf soft key.Hang up the phone.
Place a Call on Hold and Dial a New Call
When you put a call on hold, the call remains active even though you and the other party cannot hear one another. You can answer other calls while a call is on hold.
1. Answer the phone.
2. Press the Hold soft key.
3. Press the New Call soft key.
4. Use the number keypad to dial the new number.
5. To speak to the Caller on hold, press the Resume soft key.
Answer a Call While on Another Call
While on a call you will be notified two ways if another call is trying to get through:
The new phone number will flash on the LCD screen.
A short beep tone should be heard in the receiver of the phone.
1. Press the Answer soft key below the LCD screen. This will automatically put the initial call on Hold.
2. To resume the first call when the other call is completed, use the Navigation bar in the middle of the phone if necessary to select the call and press the Resume soft key.
3. To end the first call, place the current call on Hold, by pressing the Hold soft key. Press the
Resume soft key to return to the first call. End the call and Resume the second call.
IP Phone System Updated April 2006 8
Use the Directories Button
Lookup an Entry in the CLC Directory
(PLEASE NOTE: If you wish to view ALL entries in the directory, just press the Search soft key without entering any information.)
1. Press the Directories button.
2. Press 4.
3. Use the Navigation button (up and down) to move to the Last Name field.
4. Enter the first few letters of the person’s last name using the number keypad Pay special attention to the LCD screen for letter input.
5. Press the Search soft key. A list of all matching entries will be displayed.
6. Either use the navigation button to scroll to the correct name or type in the number corresponding to the correct name.
7. Press the Dial soft key to call the person.
View the Call History/Phone Logs
This section applies to recent calls that are received, placed or missed. These calls can be viewed and also used to re-dial recent calls.
1. Press the Directories button.
2. Use the Navigation button to scroll to the desired call list, either missed, received or placed..
3. Press the Select soft key, OR
4. Press 1 on the number keypad for missed calls.
5. Press 2 on the number key pad for received calls.
6. Press 3 on the number keypad for placed calls.
7. Press the Exit soft key to return to the previous directory menu.
Place a Call from Call History
1. Use the Navigation button to scroll through the call history list.
2. Use the Select soft key to select a phone number. The digits will appear on the phone display.
3. Press the Dial soft key to dial the number as it appears on the LCD screen.
4. Press the EditDial soft key to place the cursor at the beginning of a number that IS NOT a
CLC extension. YOU MUST ADD an 8 at the beginning of the dialing sequence. Use the dial pad to edit the digits as needed. Use the backspace (<<) soft key to erase digits that were entered incorrectly.
5. Press the Dial soft key to place the call or pickup the handset.
Clear All Call History
1. Press the Directories
button.
2. Press the Clear soft key.
Note The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.
IP Phone System Updated April 2006 9
Delete Voicemail Messages
All played voicemail messages that are not saved are automatically deleted after two weeks. The messages can also be deleted manually by the user. You cannot restore deleted messages.
Delete Voicemail Messages Manually
You can delete new and saved messages by phone during message playback or after you listen to the entire message.
1. Press Messages key.
2. Enter your password.
3. Press 1 to listen to new messages or press 3 to review old messages followed by 1 to listen to saved messages.
4. During or after message playback, Press 3 to delete the message.
Delete Voicemail Messages in the Deleted Items Folder
1. Press Messages key.
2. Enter your password.
3. Press 3
to review old messages.
4. Press 2 to delete messages in the Deleted Items folder.
5. Press 1 to confirm that you want to delete messages or press 2 to cancel.
IP Phone System Updated April 2006 10
Additional Phone Features
Access Voice Mail Off Campus
1. Call your phone from any touch tone phone. (Ex>. 1.847.543.1234)
2. Press the * key on the phone.
3. The system will prompt for an ID. Enter your 4-digit extension.
4. Press the # key on the phone.
5. Type in your password.
6. Follow the voice prompts to listen to new mail, or saved mail.
Redial the Last Number Dialed
To redial the most recently dialed number.
1. Press the Redial soft key. Doing so without lifting the handset activates the speakerphone or headset.
Mute a Call
You can mute the handset, headset, or speakerphone during a call. The mute feature temporarily disables your phone's microphone. Mute prevents the party or parties on the other end of the line from hearing you, but does not interfere with your ability to hear them.
1. Press the Mute button.
2. The mute button works as a toggle switch. To disengage mute, press Mute again.
Pick Up Calls Within Your Group
Call pickup allows you to pick up incoming calls within your own group. A "group" in this sense is any consolidation of Cisco IP Phone extensions. For example, your group might contain co-workers in neighboring offices or cubes. Activate call pickup so that an incoming call delivered to another extension in your group rings on your extension.
1. Press any available line button on your Cisco IP Phone.
2. Press the
PickUp soft key. The call now rings on your phone.
3. Answer the incoming call.If there is more than one incoming call involved when you activate call pickup, the first unanswered call will ring at your phone.
Place a Conference Call
You can set up conference calls including up to 6 people. You will not want to include more than 6 people or the phone connections may be compromised.
1. Once connected to the first caller, press the
More soft key.
2. Press the
Confrn soft key to open a new line and put the first caller on hold.
3. Place a call to another number.
4. When the call connects, press
Confrn again to add the new party to the call.
5. Repeat these steps to add additional parties to the conference call.
Please Note: When the call originator disconnects, the conference call will be terminated.
You can drop the last party added by pressing the RmLstC soft key.
IP Phone System Updated April 2006 11
Customize Personal Voicemail Greetings and Messages and
Other Settings
Create Additional Greetings
You can create different kinds of greetings. There are 5 greetings available in the system: standard, closed, alternate, busy and internal greetings. You can set up the system to use one or a combination of greetings.
1. Pick up the handset.
2. Press the Messages button.
3. Type in Your Password.
4. Press 4 for setup options.
5. Press 1 for greetings.
Number on Keypad Meaning
2
3
0
6. Hang up the phone when complete.
Turn on/off Alternate Greeting
Edit other greetings
Help with greetings
Update Password
Under setup option 4 in Voicemail.
IP Phone System Updated April 2006 12
Addendum for Multi-Line Phones IP 7960
Transfer a Call Received to the Extension Receiving the Call
Many times when answering the phone for someone else in the office, it is possible that the person for whom the call is intended stepped away for a second or was on another call and was unable to physically answer the call. While on the phone, the intended receiver returns or finishes the call they were on and would like to answer the new call.
1. Press the Transfer soft key.
2. Enter the extension for the person who needs to receive the call.
3. Press the Transfer soft key again.
4. Hang up the phone.
Transfer Received call to Receiver’s Voice Mail
Instead of the person being at their desk to answer the call, the caller would like that person’s voice mail.
1. Press the Transfer soft key.
2. Type in extension 7000.
3. Press the # key to bypass the password.
4. Type in the receiver’s 4 digit extension.
5. Press the Transfer soft key again.
6. Hang up the phone
Displaying “Extension in Use” Phone Icon
As a user that answers multiple lines, it is necessary to see if the extension for an incoming call is in use.
The line in use should display a handset if the extension is busy. Is this is not the case, please contact the Help Desk at extension 2052.
Setup Configuration Options
The Help Desk at extension 2052 can help with the following Setup Options:
Name and/or Phone extension displayed on the LCD screen.
Make all Secondary Extensions Silent. Phone needs to Ring for
Primary Line only.
Give Distinguishing Rings for all Extensions on the Phone.
IP Phone System Updated April 2006 13
İndir
Herkese açık bağlantı güncellendi
Sohbetinize giden herkese açık bağlantı güncellendi. You may view and manage your chat links after registration here.
Belge herkese açık bağlantısı
Reklam
