Nokia 2865 User`s Guide

9251716_2865_1_en_au_oth_v1.0.fm Page -9 Friday, September 1, 2006 10:18 PM

Nokia 2865 User’s Guide

i

9251716_2865_1_en_au_oth_v1.0.fm Page -8 Friday, September 1, 2006 10:18 PM

Copyright ©2006 Nokia. All rights reserved.

Nokia, Nokia Connecting People, Nokia 2865i, Pop-Port, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation.

Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

US Patent No 5818437 and other pending patents. T9 text input software Copyright

©1999-2006. Tegic Communications, Inc. All rights reserved.

Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 2865 product.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.”

EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO

THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE

RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

Copyright protections may prevent some images, music (including ringing tones), and the content from being copied, modified, transferred, or forwarded.

9251716

Issue 1

ii

9251716_2865_1_en_au_oth_v1.0.fm Page -7 Friday, September 1, 2006 10:18 PM

Contents

For your safety ............................... vii

About your device ............................... viii

Network services.....................................ix

Shared memory .......................................ix

Welcome ........................................... x

Getting help ............................................. x

Find your phone label ........................ x

Nokia support and contact information........................................... x

Updates.................................................. x

1. Phone at a glance ........................ 1

Keys and parts ........................................ 1

Standby mode......................................... 1

Shortcut keys .......................................... 2

Indicators and icons ............................. 2

Phone menus .......................................... 3

Scroll method...................................... 3

Main menu display ............................ 4

In-phone help...................................... 4

Security feature ..................................... 4

Go to functions ...................................... 5

Select options ..................................... 5

Organise functions............................. 5

Make calls................................................ 9

Keypad................................................... 9

Save contact option .......................... 9

Contacts list ........................................ 9

Use the last dialled number ............ 9

Make a conference call .................... 9

Answer calls .......................................... 10

Answer or silence an incoming call........................................................ 10

Adjust the earpiece volume .......... 10

Answer a call with the keypad locked .................................................. 10

Use the loudspeaker........................ 10

Mute phone during call.................. 10

Options during a call....................... 10

Keyguard ................................................ 11

3. Text entry ...................................12

Standard mode..................................... 12

Text (Abc) ........................................... 12

Numbers (123) .................................. 12

Punctuation and special characters........................................... 12

Predictive text mode .......................... 12

Activate or deactivate .................... 13

Enter text ........................................... 13

Change case and mode...................... 13

Delete text............................................. 14

2. Set up your phone ....................... 6

Antenna.................................................... 6

Battery ...................................................... 6

Remove the back cover .................... 6

Remove the battery........................... 7

UIM (CDMA SIM) card slot.............. 7

Replace the battery ........................... 7

Replace the back cover .................... 7

Charge the battery............................. 7

Turn your phone on or off................... 8

Connect the headset ............................ 8

4. Messaging ..................................15

Text messages....................................... 15

Text message folders and options 15

Write and send text messages ..... 16

Use a template.................................. 17

Read and reply to text messages. 17

Choose a text message option ..... 17

Use custom folders .......................... 18

Delete text messages ...................... 19

iii

9251716_2865_1_en_au_oth_v1.0.fm Page -6 Friday, September 1, 2006 10:18 PM

Text message settings .................... 19

Multimedia messages ........................ 20

Multimedia message folders and options................................................ 21

Write and send multimedia messages............................................ 21

Read and reply to multimedia messages............................................ 22

Choose a multimedia message option.................................................. 23

Delete multimedia messages........ 25

Multimedia message settings ...... 25

Allow multimedia reception ......... 26

Incoming multimedia messages.. 26

Allow or block advertisements .... 27

Distribution lists.................................. 27

Create distribution lists ................. 27

Add and remove contacts ............. 27

Use distribution lists....................... 27

Voice messages.................................... 27

Save voice mailbox number.......... 28

Call and set up your voice mailbox............................................... 28

Listen to your voice mail ............... 28

Automate voice mail ...................... 28

Minibrowser messages ...................... 29

Save a name and number ............. 34

Save a number (only) ..................... 34

Save a contact.................................. 34

Insert dialling codes........................ 34

Save multiple numbers .................. 34

Save other details............................ 35

Change default number................. 35

Send business cards........................ 35

Edit contacts ........................................ 36

Modify contact settings.................... 36

Set up caller groups ........................... 37

Create a caller group...................... 37

Add a contact to a caller group .. 37

Modify a caller group..................... 37

Set up voice tags................................. 37

Assign a voice tag ........................... 38

Use a voice tag................................. 38

Play back a voice tag...................... 38

Modify a voice tag .......................... 38

Delete a voice tag ........................... 38

Set up speed dial................................. 38

Assign a key to speed dial............. 39

Change speed dial numbers ......... 39

Delete speed dial numbers............ 39

Display phone number....................... 39

Delete contacts.................................... 39

Delete individual contacts ............ 39

Delete all contacts .......................... 39

5. Log .............................................. 30

View missed calls ................................ 30

View received calls ............................. 30

View dialled numbers......................... 30

Time of call........................................ 31

View Message Recipients ................. 31

Clear log lists........................................ 31

Call duration......................................... 31

Data or fax calls .................................. 32

Duration of minibrowser calls......... 32

6. Contacts ..................................... 33

View contacts....................................... 33

Search contacts................................... 33

Add new contacts ............................... 34

7. Gallery ........................................40

Open a folder ....................................... 40

Gallery options..................................... 41

Fun with images and clip art........... 41

8. Media..........................................42

Radio....................................................... 42

Turn the radio on and off.............. 42

Recorder ................................................ 43

Record speech or sound................. 43

Recording list.................................... 44

iv

9251716_2865_1_en_au_oth_v1.0.fm Page -5 Friday, September 1, 2006 10:18 PM

9. Settings ......................................45

Profiles.................................................... 45

Activate a profile.............................. 45

Personalise a profile ........................ 45

Set a timed profile........................... 45

Display .................................................... 46

Power saver........................................ 46

Standby mode settings................... 46

Screen saver....................................... 46

Banner ................................................. 46

Power saver........................................ 47

Sleep mode ........................................ 47

Backlight time-out .......................... 47

Themes.................................................... 47

Tones ....................................................... 47

Time and date....................................... 48

Clock .................................................... 48

Date...................................................... 48

Auto-update of date and time..... 48

Call........................................................... 49

Anykey answer .................................. 49

Automatic redial............................... 49

Speed dial........................................... 49

Data and fax calls ............................ 49

Call summary..................................... 50

Show call time on display ............. 50

Ringing tone for no caller ID ........ 50

Phone ...................................................... 50

Memory status.................................. 50

Automatic keyguard........................ 50

Navigation key .................................. 51

DTMF tones ........................................ 51

Start-up tone .................................... 51

Help text activation ........................ 51

Voice commands.................................. 52

Add a voice tag................................. 52

Activate a voice command............ 52

Voice command options................. 52

Connectivity .......................................... 52

Bluetooth connectivity................... 53

Data cable transfer.......................... 55

Enhancement settings........................ 56

Headset ............................................... 56

Handsfree ........................................... 56

Charger ............................................... 57

Security .................................................. 57

Phone lock.......................................... 57

Allowed number when phone locked .................................................. 58

Change lock code............................. 58

Call restrictions ................................ 58

Voice privacy ..................................... 59

Application settings............................ 59

Network.................................................. 60

Roaming options .............................. 60

Mode.................................................... 60

Network services ................................. 61

Store a feature code ....................... 61

My number selection ...................... 61

Restore factory settings .................... 62

Phone details ........................................ 62

10. Organiser ..................................63

Alarm clock ........................................... 63

Set an alarm ...................................... 63

Repeat alarm ..................................... 63

Set the alarm tone........................... 63

Set the snooze time-out ................ 64

Calendar ................................................. 64

Open calendar................................... 64

Calendar options .............................. 64

Make a calendar note..................... 65

View calendar notes (day view) ... 65

Options while viewing a day......... 65

Receive a note in calendar format

(vCal).................................................... 66

Modify calendar settings ............... 66

Notes....................................................... 66

Send a note........................................ 67

Notes options.................................... 67

To-do list................................................ 67

Send a to-do list note..................... 69

To-do list options............................. 69

Calculator .............................................. 69

v

9251716_2865_1_en_au_oth_v1.0.fm Page -4 Friday, September 1, 2006 10:18 PM

Currency converter ............................. 70

Timers ..................................................... 70

Normal timer .................................... 70

Interval timer .................................... 71

Stopwatch............................................. 72

Measure split or lap time .............. 72

Save a time........................................ 72

Stopwatch options .......................... 72

Operation note ................................. 73

17. Additional safety information 85

Operating environment .......................85

Medical devices .....................................85

Vehicles....................................................86

Potentially explosive environments.86

Emergency calls.....................................87

Certification information (SAR)........87

MANUFACTURER’S LIMITED

WARRANTY.....................................89

11. Extras ....................................... 74

Games..................................................... 74

Collection .............................................. 74

Index ...............................................92

12. Minibrowser ............................. 75

Mobile internet access ...................... 75

Sign on to the mobile internet........ 75

Navigate the mobile internet .......... 76

Phone keys......................................... 76

Receive a call while online ........... 76

Make an emergency call while online

76

Clear the cache and disconnect .. 76

13. PC connectivity........................ 78

PC data transfer .................................. 78

Nokia PC Suite ..................................... 78

14. Enhancements.......................... 79

15. Reference information ............ 81

Batteries and chargers....................... 81

Nokia battery authentication guidelines .............................................. 82

16. Care and maintenance ............ 84 vi

9251716_2865_1_en_au_oth_v1.0.fm Page -3 Friday, September 1, 2006 10:18 PM

For your safety

Read these simple guidelines.

Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws.

Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions.

Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions.

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN

REFUELLING

Do not use the phone at a refuelling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions.

Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

PLAY SAFELY

Use of vibration can aggravate injuries. Do not turn vibration on if you have any ailment in the bones or joints of your fingers, hands, wrists, or arms.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND

BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

vii

9251716_2865_1_en_au_oth_v1.0.fm Page -2 Friday, September 1, 2006 10:18 PM

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER

DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to standby mode.

Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

About your device

The wireless device described in this guide is approved for use on the CDMA

800, CDMA 1900, and 800 AMPS networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

When taking and using images or videos, obey all laws and respect local customs as well as privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

viii

9251716_2865_1_en_au_oth_v1.0.fm Page -1 Friday, September 1, 2006 10:18 PM

Network services

To use the phone you must have service from a wireless service provider or network operator. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilise network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply.

Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured.

This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols

(HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as

Mobile web

require network support for these technologies.

Shared memory

The following features in this device may share memory:

Messaging

,

Contacts

,

Gallery

,

Organiser

, and

Extras

. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many photos to the

Gallery

may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as

Messaging

and

Contacts

, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

ix

9251716_2865_1_en_au_oth_v1.0.fm Page 0 Friday, September 1, 2006 10:18 PM

x

Welcome

Congratulations on your purchase of this Nokia mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, media player, and more. Your phone can also connect to a PC, laptop, or other device using a

USB data cable or Bluetooth wireless technology.

Getting help

Find your phone label

and “Remove the battery”, p. 7, for more information.

Nokia support and contact information

For the latest version of this guide, downloads, services and additional information related to your

Nokia product, please visit www.nokia-asia.com/2865/support or your local Nokia web site.

Should you still require assistance, please refer to www.nokia-asia.com/ contactus.

To check for the nearest Nokia care center location for maintenance services, you may like to visit www.nokia-asia.com/repair.

If you need help, the Nokia Care

Contact Center is available for assistance. Before calling, we recommend that you write down the electronic serial number (ESN) or the mobile equipment ID (MEID) of your phone and have it available:

The ESN or MEID is found on the type label, which is located beneath the battery on the back of the phone.

See “Remove the back cover”, p. 6,

Updates

Check www.nokia-asia.com/2865/ supportor your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.

9251716_2865_1_en_au_oth_v1.0.fm Page 1 Friday, September 1, 2006 10:18 PM

P h o n e a t a g l a n c e

1. Phone at a glance

Keys and parts

• Left selection key (11)

• 2.5 mm Headset connector (12)

• Loudspeaker (13)

• Voice command key (14)

• Infrared (15)

• Volume and voice tag key (16)

Standby mode

Depending on your wireless service provider or network operator and the model number of your phone, some or all of the following selection keys may appear in standby mode.

• Earpiece port (1)

• Display screen (2)

• Four-way scroll and center selection key (3)

• Right selection key (4)

• Power key and end key (5)

• Keypad (6)

• Pop-Port™ connector (7)

• Microphone (8)

• Charger port (9)

• Call key (10)

The standby mode is home base and indicates your phone is idle.

Signal strength (1)—More bars indicate a stronger network signal.

1

9251716_2865_1_en_au_oth_v1.0.fm Page 2 Friday, September 1, 2006 10:18 PM

P h o n e a t a g l a n c e

Menu

(2)—Press the center selection key to select this option.

Go to

(3)—Press the left selection key to select this option.

Names

or network operator menu (4)—

Press the right selection key to select this option.

Battery level (5)—A filled-in battery icon indicates a fully charged battery.

Shortcut keys

Depending on your wireless service provider or network operator and your phone, some or all of the following scroll key shortcuts may be available in standby mode.

In standby mode, the four-way scroll and center selection keys instantly take you to frequently-accessed menus:

Scroll up—Go to the contacts list or network operator menu.

Scroll right—View the calendar.

Scroll down—Go to the contacts list.

Scroll left—Create a text message.

Center selection key—Selects menus and submenus to which you have scrolled.

Indicators and icons

Depending on your wireless service provider or network operator and your phone, some or all of the following indicators and icons may appear in standby mode.

You have one or more text or picture messages. See “Read and reply to text messages”, p. 17.

Your phone keypad is locked.

See “Keyguard”, p. 11.

You have one or more voice messages. See “Voice messages”, p. 27.

Your phone is set to the silent profile. See “Profiles”, p. 45.

The alarm clock is on.

See “Alarm clock”, p. 63.

The countdown timer is running. See “Timers”, p. 70.

The stopwatch timing is running in the background.

See “Stopwatch”, p. 72.

Integrated hands free or loudspeaker is active.

The timed profile is selected.

See “Profiles”, p. 45.

Hearing aid mode is active.

Bluetooth connectivity is enabled.

2

9251716_2865_1_en_au_oth_v1.0.fm Page 3 Friday, September 1, 2006 10:18 PM

P h o n e a t a g l a n c e

or Location sharing is set to on or to emergency only.

Phone menus

Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and personalise your phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.

Scroll method

You can use the four-way scroll key to scroll up, down, left, and right through the options.

An enhancement is connected to the phone.

Phone is being used outside of your home network.

Phone is in a digital network.

See “Network services”, p. ix.

Phone is in an analog network.

See “Network services”, p. ix.

Phone is in a 1XRTT network.

See “Network services”, p. ix.

1. To select

Menu

, use the center selection key. To scroll through the main menu, use the scroll key.

As you scroll through the menus, the menu number appears in the upper right corner of the display.

Below the battery level indicator is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the center selection key to enter submenus.

Select

Back

from the submenu level to return to the previous menu.

Press the end key to return to standby mode from any menu or submenu.

3

9251716_2865_1_en_au_oth_v1.0.fm Page 4 Friday, September 1, 2006 10:18 PM

P h o n e a t a g l a n c e

Main menu display

You can control whether your phone main menu is displayed as a

List

, or

Grid

. By default, the main menu displays in

Grid

format.

Select

Menu

>

Options

>

Main menu view

>

List

or

Grid

.

If supported by your wireless service provider or network operator, you can also change the order of menus in your main menu.

Select

Menu

>

Options

>

Organise

.

Scroll to a menu, select

Move

. Use the scroll key to move the menu to a new location, select

OK

. You can repeat the procedure to personalise your main menu.

In-phone help

Many features have brief descriptions

(help text) that can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about

15 seconds. Scroll down to view all of the description, or select

Back

to exit.

In order to view the descriptions, you must activate help text. See “Help text activation”, p. 51.

Security feature

The security feature protects your device from unauthorised outgoing calls or denies access to stored information with a lock or security code. The lock code and security code are both preset to 12345. By default, the security feature uses the lock code

(defaulted to 0000, 1234, or the last four digits of your phone number) to protect your phone.

To access the

Security

menu, do the following:

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

See “Security”, p. 57 for more information.

Note: Depending on your wireless service provider or network operator, the preset lock code may be 1234 or

0000 instead of the last four digits of your phone number.

If none of these work, contact your wireless service provider or network operator for more help.

To restore the factory settings, do the following:

1. Select

Menu

>

Settings

>

Restore settings

.

2. Enter the lock code, and select

OK

.

4

9251716_2865_1_en_au_oth_v1.0.fm Page 5 Friday, September 1, 2006 10:18 PM

P h o n e a t a g l a n c e

Note: Depending on your wireless service provider or network operator, your phone may ask for the security code

(default setting of 12345 or

00000) instead of the lock code.

Organise functions

Select

Go to

>

Options

>

Organise

.

Scroll to an option, select

Move

.

Scroll to move the option to a new location, and select

OK

. You can repeat the procedure to personalise your

Go to

menu.

Select

Done

>

Yes

to save the changes.

Go to functions

The

Go to

menu allows you to change the function of the left selection key on your phone so that your most frequently used functions can be quickly accessed from the

Go to

menu in standby mode.

Select options

1. Select

Go to

>

Options

>

Select options

.

2. Scroll to the options you want to add.

3. Select

Mark

to add an option or

Unmark

to remove an option.

4. Select

Done

when you have added all desired options.

5. Select

Yes

to save the changes.

6. Select

Go to

to display a list of the options that you selected in step 3.

5

9251716_2865_1_en_au_oth_v1.0.fm Page 6 Friday, September 1, 2006 10:18 PM

S e t u p y o u r p h o n e

2. Set up your phone

Antenna

Your device has an internal antenna.

Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do not touch the antenna area unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimises the antenna performance and the battery life.

Battery

Note: Always switch off the power, and disconnect the charger and any other device before removing the cover.

Avoid touching electronic components while changing the cover.

Always store and use the device with the cover attached.

Prolonged, continuous use of your device may increase the device temperature. The increased temperature is a normal function of this product and does not pose a safety concern for you or the device. If the temperature is uncomfortable to you, use a headset or allow your device to return to room temperature before your next call.

Remove the back cover

Slide the back cover toward the bottom of the phone, then lift the cover up and remove it.

6

9251716_2865_1_en_au_oth_v1.0.fm Page 7 Friday, September 1, 2006 10:18 PM

Remove the battery

S e t u p y o u r p h o n e

Replace the back cover

After you remove the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.

UIM (CDMA SIM) card slot

Your phone has a built-in UIM card slot. However, the UIM is not functional in this phone model.

Avoid placing anything into the UIM card slot.

2. Slide the back cover toward the top of the phone until the back cover is securely in place.

Replace the battery

1. Insert the battery, gold-coloured contact end first, into the battery slot.

2. Push down on the other end of the battery to snap the battery into place.

Charge the battery

1. Plug the charger transformer into a standard ac outlet.

2. Insert the charger output plug into the round jack at the bottom of the phone.

7

9251716_2865_1_en_au_oth_v1.0.fm Page 8 Friday, September 1, 2006 10:18 PM

S e t u p y o u r p h o n e

If necessary, you can use a CA-44 adapter cable (1) to connect a charger and the phone.

After a few seconds, the battery indicator in the display scrolls.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Connect the headset

Turn your phone on

or off

1. To turn your phone on or off, press and hold the end key for at least

3 seconds.

2. Enter the lock code, if necessary, and select

OK

.

A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement.

See “Enhancement settings”, p. 56 for information.

1. Plug the headset connector into the Pop-Port™ connector at the bottom of your phone. appears on the display.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

• Press the end key to end a call.

You can also plug a compatible headset into the 2.5-mm headset jack on the side of your phone to allow hands-free operation.

See “Enhancement settings”, p. 56.

8

9251716_2865_1_en_au_oth_v1.0.fm Page 9 Friday, September 1, 2006 10:18 PM

S e t u p y o u r p h o n e

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Use the last dialled number

1. In standby mode, press the call key to display the last 30 numbers dialled.

2. Scroll to the number or name you wish to redial, and press the call key.

Make calls

Keypad

1. Enter the phone number, and press the call key. To delete a character to the left of the cursor, select

Clear

.

2. To end the call, press the end key.

To cancel the call attempt, select

End call

.

Save contact option

1. In standby mode, enter the phone number and select

Save

, enter a name for the contact, and select

OK

.

2. To make the call, press the call key.

To return to standby mode, select

Done

.

Make a conference call

This service is network dependent.

1. Make a call to the first participant.

2. With the first participant on the line, select

Options

>

New call

.

3. Enter the phone number of the second participant; or, to retrieve a number from your contacts, select

Search

and the contact you want to call.

4. Press the call key. The first participant is put on hold.

5. When the second participant picks up, press the call key to connect the calls.

6. To end the conference call, select

Options

>

End all calls

, or press the end key.

Contacts list

1. In standby mode, scroll down to display your contacts.

2. Scroll to the contact you wish to dial, and press the call key. To view details of the entry, select

Details

.

9

9251716_2865_1_en_au_oth_v1.0.fm Page 10 Friday, September 1, 2006 10:18 PM

S e t u p y o u r p h o n e

Answer calls

Answer or silence an incoming call

1. To answer the call, press the call key or select

Answer

.

2. To reject the call, press the end key.

Select

Silence

to mute the ringing tone. Select

Dismiss

or do nothing, and the call is eventually forwarded to voice mail.

If your phone is set to

Silent

in the

Profiles

menu, select

Dismiss

, and the call is forwarded to voice mail.

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece.

When you adjust the volume, a bar chart indicates the volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key.

During the call, all features function normally. When you end or reject the call, the keypad automatically relocks.

See “Keyguard”, p. 11 for details.

When the device is locked, calls may be possible to the official emergency number programmed into your device.

Use the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.

You can use your phone loudspeaker during a call:

• To activate the loudspeaker, select

Loudsp.

.

• To deactivate the loudspeaker, select

Normal

.

The loudspeaker is deactivated automatically when a call or a call attempt ends or when certain enhancements are connected.

Mute phone during call

To mute your phone during a call, select

Mute

; to unmute the phone, select

Unmute

.

Options during a call

Many of the options that you can use during a call are network services.

Check with your wireless service provider or network operator for more information.

10

9251716_2865_1_en_au_oth_v1.0.fm Page 11 Friday, September 1, 2006 10:18 PM

S e t u p y o u r p h o n e

During a call, select

Options

and one of the following:

Loudspeaker

or

Normal

—Activate or deactivate the loudspeaker while in a call.

New call

—Initiate a conference call.

See “Make a conference call”, p. 9 for information.

Save

—Save a number entered during a call.

Add to contact

—Add a number entered during a call to a contact in your list.

End all calls

—Disconnect from all active calls.

DTMF tones

—Enter the numbers, and select

Tones

to send the numbers as tones.

Contacts

—View the contacts list.

Menu

—View the phone menu.

• To unlock the keypad, select

Unlock

, and press * within

2 seconds.

• To lock the keypad, select

Menu

, and press * within 2 seconds.

Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls or activation of features. If the keypad is locked, it unlocks when you receive a call.

After the call, the lock automatically reactivates.

When the keyguard is on, calls may be possible to the official emergency number programmed into your device.

11

9251716_2865_1_en_au_oth_v1.0.fm Page 12 Friday, September 1, 2006 10:18 PM

T e x t e n t r y

3. Text entry

You can use two methods for entering text and numbers: standard mode and predictive text mode.

Standard mode

Standard mode is the only way to enter text into the contacts list, and to rename caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.

• Press 0 to enter a space, thereby accepting a completed word.

• Press 1 as many times as necessary to scroll through a list of commonly used characters.

• Press * to display a complete list of special characters.

• Press and hold # to open

Editor settings

, and select

Number mode

,

Prediction on

or

Prediction off

.

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry screen to open the

Editor settings

.

Select

Number mode

, and the device returns to the message entry screen and switches the ABC icon in the middle of the display to the 123 icon.

To return to Abc mode, press and hold #.

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. Once a character is highlighted, select

Insert

to insert the character into your message.

Predictive text mode

Predictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.

12

9251716_2865_1_en_au_oth_v1.0.fm Page 13 Friday, September 1, 2006 10:18 PM

T e x t e n t r y

Activate or deactivate

At any text entry screen, select and hold

Options

to turn predictive text on or off depending on previous mode, or select

Options

>

Predictive text

>

Prediction on

or

Prediction off

. Press # twice to change from predictive text mode to standard mode and back.

• the specific number key to enter a number.

• # to select

Editor settings

>

Number mode

,

Prediction on

or

Prediction off

.

Enter text

The illustration below simulates your display each time a key is pressed.

For example, to write ’Nokia’ with predictive text on and with the English dictionary selected, press each of the following keys once:

6 6 5

4

2

Press 0 to enter a space and begin writing the next word. If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select

Prev.

If ? appears after a word, it is not in the dictionary. Select

Spell

to add the word to the dictionary.

Press 1 to insert a period into your message.

Press and hold:

• * to display special characters.

Press * again to cycle through all available characters.

Change case and

mode

Press # to switch between uppercase, lowercase, and sentence case, as well as standard and predictive text modes.

Case and mode are indicated by the following icons that appear in the upper left of the display screen.

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on. Only available at the beginning of a sentence.

Uppercase text: predictive text is on.

Lowercase text: predictive text is on.

Sentence case text: predictive text is on. Only available at the beginning of a sentence.

13

9251716_2865_1_en_au_oth_v1.0.fm Page 14 Friday, September 1, 2006 10:18 PM

T e x t e n t r y

Delete text

To delete text:

• select

Clear

to backspace the cursor and delete a character, or

• select and hold

Clear

to backspace continuously and delete characters.

14

9251716_2865_1_en_au_oth_v1.0.fm Page 15 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

4. Messaging

Your phone can create and receive text, multimedia, voice and minibrowser messages. Check with your service provider to see what messaging is available for you.

Text messages

Text messaging is a network service.

See “Network services”, p. ix, for more information. If your wireless service provider or network operator supports this feature, you can send and receive text messages to compatible phones that are also subscribed to the service.

When you write messages, the number of characters used is displayed on the upper right of the screen Special

(unicode) characters take more space than is indicated. Also, you can make distribution lists that contain phone numbers and names from your contact list. See “Distribution lists”, p. 27 for more information.

Note: When sending messages, your device may display

Message sent

. This is an indication that the message has been sent by your device to the message center number programmed into your device.

This is not an indication that the message has been received at the intended destination.

For more details about messaging services, check with your service provider.

Text message folders and options

Select

Menu

>

Messaging

>

Text messages

and from the following:

Create message

—Create and send messages.

Inbox

—Check for received text messages. Text messages are automatically stored in the

Inbox

when they are received. A notification appears when a message arrives in the

Inbox

.

15

9251716_2865_1_en_au_oth_v1.0.fm Page 16 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Outbox

—Check for outgoing text messages. Text messages are automatically stored in the

Outbox

as they are sent. If your service is interrupted while sending, the text message is stored in the

Outbox

until another delivery attempt is made.

Sent items

—Sent text messages are stored in

Sent items

.

Drafts

—View the list of messages saved for additional work.

Archive

—View the list of saved messages for later reference.

Templates

—Select from a collection of prewritten

Templates

, when creating text messages. Preloaded

Templates

can be edited and customised.

My folders

—Create and name personal folders.

Delete messages

—Delete messages from a selected folder or all folders.

Message settings

—Change settings to read, write, and send text messages.

Write and send text messages

1. Select

Menu

>

Messaging

>

Text messages

>

Create message

.

To go quickly to the

Create message

screen, scroll left in standby mode.

2. Compose a text message using the keypad. See “Choose a text message option”, p. 17, for options in composition.

3. Select

Send to

>

Recently used

,

Send to number

,

Send to many

, or

Send to distrib. list

(if you have created one).

4. Select a number or distribution list, enter the recipient’s phone number or e-mail address, or select

Search

to retrieve a number or e-mail address from your contacts list; select

Send

.

16

9251716_2865_1_en_au_oth_v1.0.fm Page 17 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Use a template

Templates are short, prewritten messages that can be retrieved and inserted into new text messages.

1. Select

Menu

>

Messaging

>

Text messages

>

Create message

>

Options

>

Use template

.

2. Select one of the available templates, and use the keypad to complete the text message.

Read and reply to text messages

When you receive a text message, a notification appears and the unopened letter icon ( ) is displayed.

1. Select

Show

to read the text message or

Exit

to dismiss the notification.

Scroll to view the whole message, if necessary.

When unopened messages are in your inbox, is shown in the upper left corner in standby mode as a reminder.

2. Select

Reply

>

Empty screen

,

Original text

,

Template

, or one of the predefined answers provided.

3. Compose your reply with the keypad, and select

Send

.

Choose a text message option

Create message options

When you create or reply to a text message, depending on the mode of text input you use and the features supported by your wireless service provider or network operator, some or all of the following are available:

Sending options

Mark

or

Unmark

a message as

Urgent

,

Delivery note

,

Callback no.

, or

Signature

.

Clear text

—Erase all text from your message.

Insert contact

—Insert detail from your contacts list into your message.

Insert number

—Insert a phone number or find a phone number in the contacts list.

Save

—Save the message in

Drafts

.

Exit editor

—Exit the message editor.

Use template

—Insert a predefined template.

Insert smiley

—Insert a smiley.

Insert word

or

Edit word

—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This is displayed only when predictive text is on.

Insert symbol

—Insert a special character. This is displayed only when predictive text is on.

17

9251716_2865_1_en_au_oth_v1.0.fm Page 18 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Prediction on

—Turn predictive text on or off, and select the language used for predictive text.

Read message options

When you read a text message, the following options are available:

Delete

—Discard the text message.

Use detail

>

Number

,

E-mail address

, or

Web address

—Select

Save

to create a new contact; select

Options

>

Add to contact

,

Send message

, or

Call

for other options. See “Save other details”, p. 35, to create and save details for a new contact.

Move

—Save the message to

Archive

,

Templates

, or a folder you have created.

Forward

—Forward the text message to another phone number.

Lock

or

Unlock

—Lock or unlock the text message. The appropriate option appears.

Rename

—Edit the title of the text message.

Use custom folders

Your phone has a folder system that saves and stores text messages.

Additionally you can create custom folders.

Create a custom folder

To organise your messages, create custom folders, and save messages you want to keep there.

1. Select

Menu

>

Messaging

>

Text messages

>

My folders

>

Add fold.

to create your initial custom folder.

Select

Menu

>

Messaging

>

Text messages

>

My folders

>

Options

>

Add folder

to create an additional custom folder.

2. Enter a name for the new folder, and select

OK

.

Rename a custom folder

1. Select

Menu

>

Messaging

>

Text messages

>

My folders

.

2. Scroll to the folder you wish to rename, and select

Options

>

Rename folder

.

3. Select and hold

Clear

to delete the existing entry; enter a new name for the folder; select

OK

to confirm or

Back

to exit.

Delete a custom folder

Only folders in

My folders

can be deleted. The

Inbox

,

Outbox

,

Sent items

,

Drafts

,

Archive

, and

Templates

folders are protected. When you delete a folder, all messages in the folder are also deleted.

18

9251716_2865_1_en_au_oth_v1.0.fm Page 19 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

1. Select

Menu

>

Messaging

>

Text messages

>

My folders

.

2. Scroll to the folder you wish to delete, and select

Options

>

Delete folder

.

3. Select

Yes

to delete or

No

to exit.

Delete text messages

If your message memory is full and you have more text messages waiting at the network, blinks in standby mode. You can do the following:

• Read some of the unread text messages, and delete them.

• Delete text messages from some of your folders.

All

—Deletes all text messages in the folder.

All read

—Deletes only the read text messages in the folder.

All unread

—Deletes all unread text messages in the

Inbox

.

2. If you select

All

or

All read

, select

Mark

or

Unmark

to choose the folders from which to delete text messages. Select

Options

>

Mark all

to choose all folders.

3. Select

Done

after choosing the folders.

4. Select

Yes

to delete the message or

No

to exit.

Delete a single text message

To delete a single text message, you must open it.

1. Select

Menu

>

Messaging

>

Text messages

.

2. Select the folder containing the text message you wish to delete.

3. Select and open the message you wish to delete and

Options

>

Delete

.

4. Select

Yes

to delete the message or

No

to exit.

Delete all messages in a folder

1. Select

Menu

>

Messaging

>

Text messages

>

Delete messages

and one of the following:

Text message settings

Sending options

Select

Menu

>

Messaging

>

Text messages

>

Message settings

>

Sending options

. Scroll to the setting or settings you wish to change:

Priority

>

Normal

or

Urgent

—to mark the priority of the message.

Delivery reports

—to receive a note confirming delivery of a text message.

Send callback number

>

On

—to send your default phone number to the recipient.

Signature

—to append a signature to an outgoing text message. If you have not created a signature, select

On

; enter a signature, and select

OK

.

19

9251716_2865_1_en_au_oth_v1.0.fm Page 20 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Other settings

Select

Menu

>

Messaging

>

Text messages

>

Message settings

>

Other settings

and the setting you wish to change:

Message font size

—Select the desired font size for the display.

Message overwriting

>

Sent items only

,

Inbox only

,

S. items & Inbox

, or

Off

—Set your phone to automatically replace old messages in

Inbox

or

Sent items

when new ones arrive. When the message memory is full, your phone cannot send or receive any new messages.

Save sent messages

—Select

Always save

or

Always prompt

to save sent text messages to

Sent items

. Select

Off

to not save messages.

Auto-playback of sounds

—If you have enhanced text messaging, select

On

or

Off

to control sound clips.

Queue msgs. when digital unavailable

—Select On or On prompt to store text messages in the Outbox until they can be sent with a digital service. Select Off to not store messages.

Multimedia messages

Multimedia messaging is a network service. See “Network services”, p. ix, for more information. If your wireless service provider or network operator supports this feature, you can send and receive multimedia messages to compatible phones that are also subscribed to the service.

A multimedia message can contain text, sound, a picture, or a video.

Your phone supports multimedia messages that are up to 300 KB. If the maximum size is exceeded, the phone may not be able to receive the message.

Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message.

Pictures are scaled to fit the display area of the phone. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.

Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. The wireless network may limit the size of multimedia messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by multimedia message.

Copyright protections may prevent some images, ringing tones, and other

20

9251716_2865_1_en_au_oth_v1.0.fm Page 21 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

content from being copied, modified, transferred, or forwarded.

Multimedia messaging only supports the following formats:

• Picture: JPEG, GIF, animated GIF,

BMP, and PNG

• Sound: MP3, eAAC+, SP-MIDI,

AMR audio, QCELP, and monophonic ringing tones

• Video: clips in H.264 format with

QCIF image size

You cannot receive multimedia messages if you have a call in progress, games or other applications running, or an active browsing session. Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely upon them for essential communications.

Outbox

—Check for outgoing multimedia messages. Multimedia messages are automatically stored in the

Outbox

as they are sent. If your service is interrupted while sending, then messages are stored in the

Outbox

until another delivery attempt is made.

Sent items

—Sent multimedia messages are stored in

Sent items

.

Saved items

—Save multimedia messages for later use in

Saved items

.

Delete messages

—Delete multimedia messages from the

Inbox

,

Outbox

,

Sent items

, or

Saved items

.

Message settings

—Change the settings for multimedia messages.

Write and send multimedia messages

Multimedia message folders and options

Select

Menu

>

Messaging

>

Multimedia messages.

and from the following:

Create message

—Create and send multimedia messages.

Inbox

—Check for received multimedia messages. Multimedia messages are automatically stored in the

Inbox

when they are received. You receive a notification when a message arrives in your

Inbox

.

21

9251716_2865_1_en_au_oth_v1.0.fm Page 22 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

1. Select

Menu

>

Messaging

>

Multimedia msgs.

>

Create

Message

.

2. Compose a message using the keypad. See “Choose a multimedia message option”, p. 23 for composing options.

3. Select

Send to

>

Recently used

,

To phone number

,

To e-mail address

,

To many

,

Album

, or

Distribution lists

.

4. Select a number or distribution list, and enter the recipient’s phone number or email address; or select

Search

to retrieve a number or e-mail address from your contacts list.

5. Select

Send

.

The multimedia message is moved to the

Outbox

for sending.

The wireless network may limit the size of multimedia messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by multimedia messaging.

It takes more time to send a multimedia message than to send a text message. While the multimedia message is being sent, the animated indicator is displayed and you can use other functions on the phone.

If there is an interruption while the message is being sent, the phone automatically tries to resend it a few times. If this fails, the message remains in the

Outbox

and you can try to manually resend it later. Check your

Outbox

for unsent messages.

Note: When sending messages, your device may display the words

Multimedia message sent

. This is an indication that the message has been sent by your device to the message center number programmed into your device.

This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

Messages that you send are saved in

Sent items

if the setting

Save sent messages

is set to

Yes

. See

“Multimedia message settings”, p. 25.

This is not an indication that the message has been received at the intended destination.

Read and reply to multimedia messages

When a multimedia message is received, is displayed along with the percentage display indicating the download progress. Once the message is fully downloaded, and a notification are displayed.

22

9251716_2865_1_en_au_oth_v1.0.fm Page 23 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

1. To view the message, select

Show

.

To view the message later, select

Exit

.

To view a saved message, select

Menu

>

Messaging

>

Multimedia msgs.

>

Inbox

and the message you want to view. Select

Play

to play the entire message.

2. Select

Reply

or

Options

>

Reply to all

, and compose your reply.

3. Select

Send

.

memory full. View waiting message.

appears, the memory for multimedia messages is full. To view the waiting message, select

Show

. Before you can save the message, you need to delete some of your old messages. See “Delete multimedia messages”, p. 25 for more information.

Important: Exercise caution when opening messages.

Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.

Choose a multimedia message option

Create message options

The options available to you depend on the mode of text input you are using and the features supported by your wireless service provider or network operator. When you create or reply to a multimedia message, some or all of the following options are available:

Send to album

—Send message to an online album. This is an online network service. Check with your service provider for more information.

Insert

>

Image

,

Sound clip

, or

Video

Insert an image, sound clip, or video file. Open the desired folder, and select the file.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Insert

>

New sound clip

,

Business card

, or

Calendar note

—insert one of these items into the message.

Insert

>

Slide

—Insert a slide into your message. Each slide can contain text, a business card, a calendar note, one image, and one sound clip.

Delete

>

Image

,

Sound clip

, or

Video

, or

Slide

—Delete one of these files from your message. Only appears when your message has a file attachment.

Edit subject

—Edit the subject heading.

Clear text

—Erases all text from the current slide in your message.

Preview

—Preview the message or slide presentation before sending it. Select

Stop

to end the preview. Select

Play

to start the preview again or

Back

to return to the list of options.

23

9251716_2865_1_en_au_oth_v1.0.fm Page 24 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Previous slide

—Move to the previous slide. Option only appears if there is a previous slide.

Next slide

—Move to the next slide.

Option only appears if there is a next slide.

Slide list

—Shows a list of all slides.

Select the slide you wish to edit.

Slide timing

—Set the timing interval for each slide. By default, each slide appears for 12 seconds.

Place text first

or

Place text last

—Move text to the top or bottom of the slide.

By default, the text appears at the bottom or last.

Save

—Saves the message to

Saved items

.

More options

>

Insert contact

, or

Insert number

—Insert one of these items into your message.

More options

>

Message details

Shows the details of your multimedia message.

Exit editor

—Exits the message editor.

Insert smiley

—Insert a smiley.

Insert word

or

Edit word

—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This appears only when predictive text is on.

Insert symbol

—Insert a special character. This appears only when predictive text is on.

Prediction on

or

Prediction off

—Turn predictive text on or off.

Matches

—View matches found in the predictive text dictionary for the word you want to use. This appears only when predictive text is on.

Read message options

When you read a multimedia message, the following options are available:

Set contrast

—Adjust the contrast of an image. This option is only available when viewing an image.

Details

—Displays the details of a file attachment to which you have scrolled.

Save image

,

Save sound clip

, or

Save video clip

—Save the corresponding file to the

Gallery

. Images, sound clips, and videos must be opened before you can save them.

Save link

—Save the corresponding Web link. This appears only when you have scrolled to a Web link.

View text

—View only the text included in the message.

Activate image

,

Activate tone

, or

Activate video

—View or listen to the corresponding file.

Delete

—Delete the message you are viewing.

Reply

or

Reply to all

—Enter a reply and send it to the original sender and any other recipients of the message.

24

9251716_2865_1_en_au_oth_v1.0.fm Page 25 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Use detail

—Use a corresponding number or e-mail address. Scroll to the number or e-mail address.

Send to number

, or

Send to many

Forward the message to a phone number, to an e-mail address, or to multiple recipients.

Album

—Forward the message to an online album. This is an online network service. Check with your service provider for more information.

Message details

—View the sender’s name and phone number, the message center used, reception date and time, message size and type.

Delete a single multimedia message

1. Select

Menu

>

Messaging

>

Multimedia msgs.

2. Select the folder containing the multimedia message you wish to delete.

3. Select the message you wish to delete and select

Options

>

Delete

.

4. Select

Yes

to delete or

No

to exit.

Delete all multimedia messages in a folder

1. Select

Menu

>

Messaging

>

Multimedia msgs.

>

Delete messages

>

Inbox

,

Outbox

,

Sent items

, or

Saved items

.

2. Select

Yes

to delete the all messages in the folder or

No

to exit.

Delete multimedia messages

If your message memory is full and you have more multimedia messages waiting at the network, blinks in standby mode. You must delete some existing messages before you can open and view any messages. You can:

• read some of the unread multimedia messages, and delete them.

• delete multimedia messages from some of your folders.

Multimedia message settings

You can change how your messages are displayed or saved. Select

Menu

>

Messaging

>

Multimedia msgs.

>

Message settings

and one of the following items:

Save sent messages

>

No

or

Yes

—Save the multimedia messages that you send to the

Sent items

folder.

Delivery reports

>

On

or

Off

—Request delivery reports to inform you if a message is delivered.

25

9251716_2865_1_en_au_oth_v1.0.fm Page 26 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Scale image down

>

Yes

or

No

Request for images to be automatically scaled down.

Default slide timing

, enter a slide time, and select

OK

—Set the default time in mm:ss for the slides of a multimedia message.

Allow multimedia reception

Before you can use the multimedia message feature, you must specify whether you want to receive message at all times or only if you are in the service provider’s home system. This is a network service. Check with your service provider for more information.

The default setting of the multimedia message service is generally on. The appearance of a multimedia message may vary depending on the receiving device.

You can choose to receive all messages, to block all messages, or to receive messages only when you are in the service provider’s home network.

Select

Menu

>

Messaging

>

Multimedia msgs.

>

Message settings

>

Allow multimedia recept.

and one of the following:

Yes

—Allow all incoming messages.

In home network

—Allow incoming messages only if you are in the service provider’s home system. This is a network service. Check with your service provider for more information.

No

—Block all incoming messages.

Incoming multimedia messages

You can set how your phone retrieves incoming multimedia messages.

Select

Menu

>

Messaging

>

Multimedia msgs.

>

Message settings

>

Incoming multim. msgs.

and one of the following:

Retrieve

—Sets the phone to automatically retrieve all multimedia messages. When new messages arrive, you are notified that a multimedia message is received. If you choose to automatically retrieve messages, you can select

Show

to read the multimedia message or

Exit

to view them in your inbox later.

Retrieve manually

—Choose the messages you wish to retrieve. When new messages arrive, you are notified that a multimedia message is available for retrieval. If you select to manually retrieve messages, select

Show

to open the message notification, then

Retrieve

. Select

Exit

to save the notification to your inbox, and retrieve the message later.

Reject

—Sets the phone to reject multimedia messages.

26

9251716_2865_1_en_au_oth_v1.0.fm Page 27 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Allow or block advertisements

Allows you to block advertisements.

This setting is not available if multimedia reception is blocked.

To select whether to allow or block advertisements, select

Menu

>

Messaging

>

Multimedia msgs.

>

Message settings

>

Allow advertisements

>

Yes

or

No

.

This is a network service. Check with your service provider for more information.

Distribution lists

Distribution lists allow you to send messages to a designated group of people.

Create distribution lists

1. Select

Menu

>

Messaging

>

Distribution lists

>

New list

.

To create a second distribution list, select

Menu

>

Messaging

>

Distribution lists

>

Options

>

Create new list

.

2. Enter a name for the list, and select

OK

.

3. To add a contact to this list, select

Add new

, and add the contacts one by one.

A distribution list only contains phone numbers of recipients.

Add and remove contacts

Select

Menu

>

Messaging

>

Distribution lists

> the list of choices, and one of the following items:

Add new

—Add the contacts one by one.

Options

, and remove the contact name.

Use distribution lists

1. Select

Menu

>

Messaging

>

Distribution lists

.

2. Scroll to the list you wish to modify; select

Options

and one of the following:

Create new list

—Create a new distribution list.

Send message

—Send message to the distribution list.

Rename list

—Rename the distribution list.

Clear list

—Clear the distribution list of all current contacts.

Delete list

—Delete the distribution list.

Voice messages

Voice mail is a network service that allows callers to leave a voice message when you cannot be reached directly.

When you receive a voice message, your phone will beep, display a message, or both. If you receive more than one message, your phone shows the number of messages received.

27

9251716_2865_1_en_au_oth_v1.0.fm Page 28 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Save voice mailbox number

Your wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Select

OK

to leave the number unchanged. If not, your wireless provider will tell you the voice mailbox number, and you can save it.

1. Select

Menu

>

Messaging

>

Voice messages

>

Voice mailbox number

.

2. If the number is not displayed or incorrect, enter your voice mailbox area code and number.

3. Select

OK

.

• select

Menu

>

Messaging

>

Voice messages

>

Listen to voice messages

.

When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.

Automate voice mail

Voice mail services vary by service provider. The following instructions are examples of common operations.

Please check with your service provider for specific instructions for using your voice mail service.

Call and set up your voice mailbox

After you save the voice mailbox number, in standby mode, press and hold 1. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to set up your voice mailbox.

Listen to your voice mail

After you set up voice mail, you listen to your messages. You can:

• press and hold 1,

• select

Listen

if there is a notification on the display, or

Write down number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step.

Note that each voice mail service may vary. Your steps may resemble the following:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press

1234, and press *.

Be precise; you will need this information in “Set up voice mail with dialling codes”, p. 29.

28

9251716_2865_1_en_au_oth_v1.0.fm Page 29 Friday, September 1, 2006 10:18 PM

M e s s a g i n g

Set up voice mail with dialling codes

1. Select

Menu

>

Contacts

>

Speed dial

.

2. Scroll to an empty speed dial slot, and select

Assign

.

3. Enter your voice mailbox number.

4. Refer to dialling codes, and enter any codes as necessary. Use the information that you saved from

“Write down number and process”, p. 28.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example,

2145551212pp. For more information on dialling codes see

“Insert dialling codes”, p. 34.

5. Enter any remaining pauses or other information that allows you to listen to your messages, and select

OK

.

6. Enter a name (such as voice mail), and select

OK

.

To dial and listen to your voice mail, press and hold the assigned speed dial key in standby mode.

Minibrowser

messages

Minibrowser messaging is a network service. See “Network services”, p. ix, for more information.

Important: Exercise caution when opening messages.

E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

If your wireless service provider or network operator supports this feature, you can check for e-mail messages using the minibrowser. Select

Menu

>

Messaging

>

Minibrowser messages

.

See “Minibrowser”, p. 75 for more information on using your phone to access web pages.

29

9251716_2865_1_en_au_oth_v1.0.fm Page 30 Friday, September 1, 2006 10:18 PM

L o g

5. Log

Log

stores information about the last

30 missed, 30 received, or 30 dialled calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest.

Whether viewing missed, received, or dialled calls, the menu options are the same:

Time of call

—Display the date and time of the call.

Send message

—Send a message to the number.

Use number

—Edit the number and associate a name with the number.

Save

—Enter a name for the number and save it to your contacts list.

Add to contact

—Add the number to an existing name in your contacts list, if the number is not associated with a name.

Delete

—Clear the number from memory.

Call

—Call the number.

View missed calls

Missed calls are calls that were never answered. The missed calls feature does not function when your phone is switched off.

1. Select

Menu

>

Log

>

Missed calls

; if a missed call notification appears, select

List

.

2. Scroll to a name or number, select

Options

and a menu option.

View received calls

Received calls are calls that have been answered.

1. Select

Menu

>

Log

>

Received calls

.

2. Scroll to a name or number, select

Options

and a menu option.

View dialled numbers

Dialled calls are numbers you have previously dialled from your phone.

1. In standby mode, press the call key; or select

Menu

>

Log

>

Dialled numbers

.

2. Scroll to a name or number, select

Options

and a menu option.

30

9251716_2865_1_en_au_oth_v1.0.fm Page 31 Friday, September 1, 2006 10:18 PM

L o g

Time of call

You can make or receive up to five calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately.

1. While viewing a missed, received, or dialled call, select

Options

>

Time of call

.

2. Scroll down to view the most recent call times from this number.

3. Select

Back

to return to the options list.

View Message

Recipients

You can view the names of those to whom you have sent messages.

Select

Menu

>

Log

>

Message recipients

.

Clear log lists

You can delete any missed, dialled, or received calls from phone memory.

Select

Menu

>

Log

>

Clear log lists

>

All call lists

,

Missed calls

,

Received calls

,

Dialled numbers

, or

Message recipients

.

Call duration

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.

You can view the duration of your calls. Select

Menu

>

Log

>

Call duration

and one of the following options:

Last call duration

—Check the time of your last call.

Dialled calls' duration

—Check the combined time of calls you dialled for either

Home

or

Roaming

.

Received calls' duration

—Check the combined time of calls you received for either

Home

or

Roaming

.

All calls' duration

—Check the combined time of all calls.

Life timer

—Check the total airtime minutes logged on your phone.

Clear timers

—Enter your lock code, and select

OK

to clear all timers on your phone.

Note: Some timers, including the life timer, may be reset during service or software upgrades.

31

9251716_2865_1_en_au_oth_v1.0.fm Page 32 Friday, September 1, 2006 10:18 PM

L o g

Data or fax calls

Data/fax calls

are network services.

See “Network services”, p. ix, for more information. If your wireless service provider or network operator supports this feature, you can view the size or duration of sent or received data and fax calls.

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.

Select

Menu

>

Log

>

Data/fax calls

and one of the following options:

Last sent data/fax

—View the size (KB) of the last sent data or fax call.

Last received data/fax

—View the size

(KB) of the last received data or fax call.

All sent data/fax

—View the size (KB) of all sent data and fax calls.

All received data/fax

—View the size

(KB) of all received data and fax calls.

Duration of last data/fax call

—View the duration time of the last data or fax call.

Duration of all data/fax calls

—View the duration time of all calls.

Clear all data/fax registers

—Select

Yes

to clear all data and fax registers.

Duration of

minibrowser calls

Minibrowser is a network service.

See “Network services”, p. ix, for more information. If your wireless service provider or network operator supports this feature, you can view the size or duration of sent or received data from the minibrowser.

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.

Select

Menu

>

Log

>

Minibrowser calls

and one of the following options:

Last sent browser data

—View the size

(KB) of the last send browser data.

Last received browser data

—View the size (KB) of the last received data.

All sent browser data

—View the size

(KB) of all sent browser data.

All received browser data

—View the size (KB) of all received browser data.

Last browser session

—View the duration of the last browser session.

All browser sessions

—View the duration of all browser sessions.

Clear all browser logs

—Select

OK

>

Yes

to clear all browser logs.

32

9251716_2865_1_en_au_oth_v1.0.fm Page 33 Friday, September 1, 2006 10:18 PM

C o n t a c t s

6. Contacts

The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact.

The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.

Select

Menu

>

Contacts

and from the following options:

Names

—Display the list of contacts currently on your phone.

Settings

—Change your contact settings.

Groups

—Assign contacts to caller groups.

Voice tags

—Assign voice commands to phone numbers.

Speed dial

—Assign specific keys to phone numbers.

My number

—Show the current number assigned to the phone.

Delete all contacts

—Delete all contacts on your phone.

For quick access to your contacts, scroll up or down while in standby mode.

View contacts

Select

Menu

>

Contacts

>

Names

, or scroll down to see your current list of contacts. While viewing your contact list, you can select

Details

for the contact information or

Options

and one of the following:

Search

—Search your contacts.

Add new

—Add a new contact.

Add new group

—Add a new caller group.

Delete contact

—Delete the selected contact.

To make a call, scroll to a contact, and select

Call

.

Search contacts

Select

Menu

>

Contacts

>

Names

>

Options

>

Search

. Enter the first character of the contact name, and scroll to the contact you wish to view.

If the right selection key on your phone is

Names

, you can select

Names

>

Options

>

Search

in standby mode.

33

9251716_2865_1_en_au_oth_v1.0.fm Page 34 Friday, September 1, 2006 10:18 PM

C o n t a c t s

Add new contacts

Save a name and number

1. In standby mode, enter the phone number you wish to save.

2. Select

Save

.

3. Enter the name, and select

OK

>

Done

.

When you enter a number, you can select

Options

>

Insert pause ('p')

to insert a pause code or

Options

>

Insert wait ('w')

to insert a wait code.

See “Insert dialling codes”, p. 34, for more information.

wait, bypass, or accept the numbers that follow them in the dialling string.

Automate voice mail with dialling codes. For more information, see

“Automate voice mail”, p. 28.

Press * repeatedly to cycle through dialling codes. When the desired code is displayed, pause briefly, and the code is inserted into the dialling string.

The following dialling codes are available:

Save a number (only)

In standby mode, enter the phone number you wish to save, and select and hold

Options

.

Save a contact

1. Select

Menu

>

Contacts

>

Names

>

Options

>

Add new

.

2. Enter the name, and select

OK

.

3. Enter the phone number, and select

OK

.

Dialling code

*

Indicates...

+ p w

Bypasses a set of instructions.

Causes the international access code to be replaced by +.

Pauses for 2.5 seconds before sending any numbers that follow.

Waits for you to press the call key before sending the numbers or codes that follow.

Insert dialling codes

Insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a

Speed dial

location. Dialling codes instruct the receiving system to pause,

Save multiple numbers

You can save different types of phone numbers per contact. The first number you save for any entry is automatically set as the default, but the default number can always be changed.

34

9251716_2865_1_en_au_oth_v1.0.fm Page 35 Friday, September 1, 2006 10:18 PM

C o n t a c t s

1. In standby mode, scroll down to display your list of contacts.

2. Select the contact to which you want to add a phone number.

3. Select

Details

>

Options

>

Add detail

>

Number

>

General

,

Mobile

,

Home

,

Office

, or

Fax

.

4. Enter the phone number, and select

OK

.

If you want to change the number type, scroll to the number, and select

Details

>

Options

>

Change type

>

General

,

Mobile

,

Home

,

Office

, or

Fax

.

3. Select

Details

>

Options

>

Add detail

>

Image

to save an image from the gallery or

Tone

to select the default tone or a new tone from the gallery.

Change default number

To change the default number for an existing contact.

1. In standby mode, scroll down to display your list of contacts.

2. Select the contact to change the default number and

Details

.

3. Scroll to the new default number, and select

Options

>

Set as default

.

Save other details

To add an address or a note to an existing contact, do the following:

1. In standby mode, scroll down to display your list of contacts.

2. Scroll to the contact to which you want to add an address or note.

3. Select

Details

>

Options

>

Add detail

>

E-mail address

,

Web address

,

Postal address

, or

Note

.

4. Enter the text for the note or address, and select

OK

.

To associate an image or tone to an existing contact, do the following:

1. In standby mode, scroll down to display your list of contacts.

2. Scroll to the contact to which you want to add an image or a tone.

Send business cards

You can send a business card to a compatible phone or other handheld device.

1. In standby mode, scroll down to display your list of contacts.

2. Select the contact to send as a business card and

Details

.

3. Select the number to use and

Options

>

Send bus. card

>

Via multimedia

,

Via text message

,

Via

Bluetooth

, or

Via infrared

.

4. Select

Default number

or

All details

to send all the personal details that have been defined.

35

9251716_2865_1_en_au_oth_v1.0.fm Page 36 Friday, September 1, 2006 10:18 PM

C o n t a c t s

5. Enter the number for your recipient, or select

Search

to retrieve a number from your contacts; select

OK

.

Edit contacts

1. In standby mode, scroll down to display your list of contacts.

2. Scroll to a contact, select

Details

.

3. Scroll to the name, number, detail, or image you wish to edit, and select

Options

. The type of detail to which you scroll determines your selection of options. Choose one of the following options:

View

—View the phone number of the contact.

Add detail

>

Name

—Add a name to the contact. This option appears only if the contact does not have a name.

Add detail

>

Number

>

General

,

Mobile

,

Home

,

Office

, or

Fax

—Add a number to the contact.

Add detail

>

E-mail address

,

Web address

,

Postal address

,

Note

,

Image

, or

Tone

—Add an additional detail to the contact.

Edit name

,

Edit number

, or

Edit detail

—Edit the detail of the contact.

Change image

—Change the selected image associated with the contact.

Delete contact

—Delete the entire contact entry from your contacts.

Delete

—Delete the detail from this contact.

Send message

—Create and send a text message to the contact.

Use number

—Display the phone number, ready for use.

Set as default

—Make the number the default for the contact.

Change type

>

General

,

Mobile

,

Home

,

Office

, or

Fax

—Change the number type.

Add voice tag

—Add a voice tag to the contact.

Save to gallery

—Save the image to your

Gallery

.

Send bus. card

>

Via text message

,

Via Bluetooth

,

Via infrared

, or

Via multimedia

—Send the contact as a business card to another phone.

Add to group

—Add the contact to a previously created call group.

Speed dial

—Assign the contact to your speed dial list.

Modify contact

settings

Select

Menu

>

Contacts

>

Settings

and the setting you wish to change:

Scrolling view

—Select

Normal name list

,

Name and number

,

Large name list

, or

Name and image

view.

36

9251716_2865_1_en_au_oth_v1.0.fm Page 37 Friday, September 1, 2006 10:18 PM

C o n t a c t s

Memory status

—View the amount of phone memory used as well as the amount of phone memory available.

Set up caller groups

You can add contacts to caller groups that you create and assign a unique ringing tone or graphic to each group.

This enables you to identify callers from the group by their unique ringing tone or graphic.

Create a caller group

You can create a new caller group and store a list of contacts in the group.

Select

Contacts

>

Groups

>

Options

>

Add new group

; enter the name of the new group, and select

OK

.

Add a contact to a caller group

1. In standby mode, scroll down to display your list of contacts.

2. Scroll to a contact, select

Details

.

3. Scroll to a number, and select

Options

>

Add to group

and the existing caller group to which you wish to add the number.

Modify a caller group

Select

Menu

>

Contacts

>

Groups

>

Options > Group details

and one of the following options:

Group name

—Rename the group to your preference.

Group ringing tone

—Set the ringing tone for the group.

Group image

—Turn the graphic for the caller group on or off.

Group members

—Add or remove members from the caller group.

Set up voice tags

Before using voice tags, note the following:

• Voice tags are not language-dependent. They are dependent on the speaker's voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.

• Very short names are not accepted.

Use long names, and avoid similar names for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.

37

9251716_2865_1_en_au_oth_v1.0.fm Page 38 Friday, September 1, 2006 10:18 PM

C o n t a c t s

Assign a voice tag

To use voice dialling, you must first assign a voice tag to a number.

1. In standby mode, scroll down to your list of contacts.

2. Scroll to a contact, and select

Details

.

3. Scroll to the number you want to assign a voice tag, and select

Options

>

Add voice tag

.

4. Select

Start

, then speak clearly into the microphone. Do not select

Quit

unless you want to cancel the recording.

5. After you finish speaking, the phone automatically stops recording, saves, and replays the voice tag.

appears next to the phone numbers which have voice tags assigned.

Use a voice tag

1. Select and hold

Names

.

2. When you hear several beeps and

Speak now

appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the phone finds the voice tag, a notification appears, and the phone automatically dials the number. If the phone does not locate a number or recognise the voice tag,

No match found

appears.

Play back a voice tag

1. Select

Menu

>

Contacts

>

Voice tags

.

2. Scroll to the voice tag you want to play back, and select

Playback

.

Modify a voice tag

1. Select

Menu

>

Contacts

>

Voice tags

.

2. Scroll to the voice tag you want to change, and select

Change

.

3. Select

Start

, and speak clearly into the microphone. The phone repeats your voice tag, and

Voice tag changed

appears.

Delete a voice tag

1. Select

Menu

>

Contacts

>

Voice tags

.

2. Scroll to the voice tag you want to delete, and select

Delete

.

Delete voice tag?

appears.

3. Select

Yes

to erase the voice tag.

Set up speed dial

You can associate any entry in your contacts with a key from 2 to 9; to dial those entries, select and hold the assigned key.

38

9251716_2865_1_en_au_oth_v1.0.fm Page 39 Friday, September 1, 2006 10:18 PM

C o n t a c t s

Assign a key to speed dial

1. Select

Menu

>

Contacts

>

Speed dial

.

2. Scroll to any empty slot, and select

Assign

.

3. Enter the number, and select

OK

; or select

Search

to retrieve a number from your contacts.

4. If necessary, enter the contact name for the number, and select

OK

.

If

Speed dial

is off, the phone displays a prompt asking if you want to activate

Speed dial

. Select

Yes

to activate

Speed dial

.

Delete speed dial numbers

1. Select

Menu

>

Contacts

>

Speed dial

.

2. Scroll to the

Speed dial

location you wish to delete.

3. Select

Options

>

Delete

>

Yes

to delete the key assignment.

Display phone

number

Select

Menu

>

Contacts

>

My number

to display your phone number.

Delete contacts

Change speed dial numbers

1. Select

Menu

>

Contacts

>

Speed dial

.

2. Scroll to the

Speed dial

entry you wish to change, and select

Options

>

Change

.

3. Enter the new number, or select

Search

to retrieve a number from your contacts; select

OK

.

4. If necessary, enter the contact name for the number, and select

OK

to change the key assignment.

Delete individual contacts

1. In standby mode, scroll down to display your list of contacts.

2. Scroll to a contact, and select

Options

>

Delete contact

>

Yes

or

No

.

Delete all contacts

1. Select

Menu

>

Contacts

>

Delete all contacts

>

Yes

.

2. Enter your lock code, and select

OK

.

See “Security”, p. 57 for more information.

39

9251716_2865_1_en_au_oth_v1.0.fm Page 40 Friday, September 1, 2006 10:18 PM

G a l l e r y

7. Gallery

You can save pictures, videos, recordings, music files, and ringing tones to folders in the

Gallery

, and add new folders to the ones already there.

To download images and tones, use multimedia messaging, text messaging, mobile Internet sites, or

Nokia PC Suite.

Your phone supports a digital rights management system to protect content that you have acquired.

A piece of content, such as a ringing tone, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period. The rules are defined in the content activation key that can be delivered with the content or separately, depending on the service provider. You may be able to update these activation keys. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.

Copyright protection may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Your phone has about 12 MB of memory for storing files in the

Gallery

.

This memory is not shared with other functions, such as contacts. If the phone displays a message that the memory is full, delete some existing files before proceeding.

Open a folder

Select

Menu

>

Gallery

to view the folder system. The phone folder system includes:

Images

—By default, received pictures are saved to this folder.

Video clips

—By default, received videos are saved to this folder.

Themes

—A set of themes included with your phone are stored here.

Graphics

—A set of graphics included with your phone are stored here.

Tones

—A set of ringing tones included with your phone are stored here.

Recordings

—By default, voice recordings are saved to this folder.

Received files

—Files sent directly to your phone are stored here.

Folders you create appear after the preset folders.

To open a folder, scroll to the folder, and select

Open

. Once you open the folder list and scroll to a file, you can

40

9251716_2865_1_en_au_oth_v1.0.fm Page 41 Friday, September 1, 2006 10:18 PM

G a l l e r y

access the file or the options associated with that specific file type.

Gallery options

Select

Menu

>

Gallery

>

Options

and one of the following:

Delete folder

—Delete a folder you have created. You cannot delete a preset folder.

Move

—Move the selected folder into another folder. After selecting

Move

, scroll to another folder, and select

Move to

. You cannot move a preset folder.

Rename folder

—Rename a folder you have created. You cannot rename a preset folder.

Details

—Show the name, size, and date of creation of the selected folder.

Type of view

—Choose whether to view the folders as a list with details, list only or grid.

Sort

—Sort the contents of the selected folder by name, date, format, or size.

Add folder

—Create a new folder.

Memory status

—Check the available memory for the phone handset.

Activation key list

—View the list of available activation keys. You can delete activation keys if desired.

Mark

or

Mark all

—Allows you to mark folders to be moved into another folder. This function only applies to folders you have created.

Other options appear depending on the type of files that exist in the folders.

Fun with images and

clip art

In the gallery, you can select photos and clip art and save them as screensavers and wallpaper.

Personalise photos, clip-art, screensavers, and wallpaper by adding your own text, changing the size of an image, placing one image inside another, and adjusting the contrast.

Select

Menu

>

Gallery

>

Images

> scroll to an image >

Open

>

Options

>

Edit image

>

Options

> and select a choice.

You can also personalise clip-art, existing wallpapers and screensavers with text and images.

When adding text, you can select the font style, size, and colour. Plus, the font can be rotated.

41

9251716_2865_1_en_au_oth_v1.0.fm Page 42 Friday, September 1, 2006 10:18 PM

M e d i a

8. Media

Radio

Your phone has an FM radio that also functions as an alarm clock radio.

To listen to the FM radio on your phone, connect a compatible music stand, a stereo headset to the connector on the bottom of the phone.

The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.The quality of a radio broadcast depends on coverage of the radio station in that particular area.

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.

Turn the radio on and off

1. Connect the phone to a compatible headset or music stand.

2. Select

Menu

>

Media

>

Radio

.

The channel location number, the name of the radio channel (if you have saved the channel), and the frequency of the radio channel are displayed.

To use the graphical keys

, , or

,

on the display, scroll left or right to the desired key, and select it.

If you have already saved radio channels, select or to scroll to the channel you would like to listen to.

To select a radio channel location, briefly press the corresponding number keys.

3. To turn off the radio, select

Options

>

Turn off

. A long press on of the end key also turns the radio off.

Options

With the radio on, select

Options

and one of the following:

Turn off

—Turn off the radio.

Save station

—Save the current station to one of 20 locations (only available with a new station entered).

Stations

—Scroll up or down to select a channel from 20 locations. WIth an existing channel highlighted, select

Options

>

Delete station

or

Rename

to delete or rename the saved channel.

42

9251716_2865_1_en_au_oth_v1.0.fm Page 43 Friday, September 1, 2006 10:18 PM

M e d i a

Mono output

or

Stereo output

—Listen to the radio in monaural mode

(default) or in stereo. Stereo output is available through a stereo enhancement.

Loudspeaker

or

Headset

—Listen to the radio through the speakerphone or through the headset.

Set frequency

—Manually enter the frequency of a known radio station.

To set the radio frequency, press * and use the keypad to enter the frequency of a known radio station.

To adjust the radio volume, press the volume up and down keys.

When an application using a browser connection is sending or receiving data, it may interfere with the radio.

When you place or receive a call, the radio automatically mutes. When the call ends, the radio switches back on.

Tune and save a radio channel

1. You can save a preset station to any one of 20 locations in memory.

When the radio is on, select

to change the radio frequency in 0.1 MHz steps, or

or select and hold or to start the channel search. Searching stops when a channel is found.

2. To save the channel, select

Options

>

Save station

.

To save the channel to a memory location 1 to 9, press and hold the corresponding number key while the radio is playing. To save the channel in the memory location from 10 to 20, press briefly 1 or 2 and the desired number key 0 to 9.

3. Enter a name for the channel, and select

OK

.

4. Select an

(empty)

location to save the channel.

Recorder

Voice recorder allows you to make a short (up to 3 minutes) recording and save it to the

Recordings

folder or another folder in the

Gallery

.

The recorder cannot be used when a data call is active.

Record speech or sound

1. Select

Menu

>

Media

>

Recorder

.

2. To start the recording, select the red record virtual button.

3. Hold the phone in the normal position near your ear, and record your message.

4. When you are finished recording, select the green stop virtual button.

The recording is given a default name and saved to the

Recordings list

.

The default location of the

Recordings list

is the

Recordings

folder in the

Gallery

.

43

9251716_2865_1_en_au_oth_v1.0.fm Page 44 Friday, September 1, 2006 10:18 PM

M e d i a

After you have made a recording, select

Play last recorded

to replay the recording and

Send last recorded

>

Via Bluetooth

,

Via infrared

, or

Via multimedia

to send the recording to a compatible phone. These options are only available during the current recording session.

Recording list

1. Select

Menu

>

Media

>

Recorder

>

Recordings list

.

2. Navigate through the

Recordings

folder, and select a recording you want to modify.

3. Select

Open

to open and play the recording, or select

Options

to use the

Gallery

options.

44

9251716_2865_1_en_au_oth_v1.0.fm Page 45 Friday, September 1, 2006 10:18 PM

S e t t i n g s

9. Settings

Use the

Settings

menu to personalise the functions of your phone.

Profiles

Profiles

define how your phone reacts when you receive a call or message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the available profiles can be left at their default setting, or customised to suit your needs.

The following profiles are available:

Normal

,

Silent

,

Meeting

,

Outdoor

, and two customisable profiles.

Profiles are also available for enhancements such as a headset and car kit. See “Enhancement settings”, p. 56.

Activate a profile

Select

Menu

>

Settings

>

Profiles

>

Normal

,

Silent

,

Meeting

,

Outdoor

, or custom profile >

Activate

.

Personalise a profile

To modify a profile, select

Menu

>

Settings

>

Profiles

> select a profile >

Personalise

> and a profile option.

You cannot rename the

Normal

profile.

To personalise profile tones, see

“Tones”, p. 47.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to

Silent

before the event starts, but you forget to return it to

Normal

until long after the event.

A timed profile can prevent missed calls by returning your phone to the default profile at a time you specify.

To set a timed profile, do the following:

1. Select

Menu

>

Settings

>

Profiles

>

Normal

,

Silent

,

Meeting

,

Outdoor

, or custom profile >

Timed

.

2. Enter the time for the profile to expire, and select

OK

.

Timed profiles can be set up to 24 hours in advance.

45

9251716_2865_1_en_au_oth_v1.0.fm Page 46 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Display

Your phone has a high resolution colour display.

colour

. Scroll to select a colour from the colour grid.

Power saver

When this feature is enabled, the display shows only a simplified display after a time-out period. Select

Menu

>

Settings

>

Display

>

Power saver

>

On

or

Off

Standby mode settings

You can choose settings for the standby screen on the display.

Wallpaper

You can set either an

Image

or a

Slide set

for the phone display.

Select

Menu

>

Settings

>

Display

>

Standby mode settings

>

Wallpaper

and one of the following:

On

—Activate wallpaper on your phone.

Off

—Deactivate wallpaper on your phone.

Wallpapers

>

Images

> the image of your choice—Select an image to use as wallpaper.

Wallpapers

>

Slide set

—Use a series of images displayed as wallpaper.

Font colour

To set font colour of your phone select

Menu

>

Settings

>

Display

>

Standby mode settings

>

Standby mode font

Screen saver

You can choose a screen saver for the display. Select

Menu

>

Settings

>

Display

>

Screen saver

and one of the following:

On

—Activate screen saver on your phone.

Off

—Deactivate screen saver on your phone.

Screen savers

>

Image

,

Slide set

,

Video

, or

Digital clock

—Choose an image, video or other option to act as your screen saver.

Time-out

—Modify the idle time before the screen saver activates.

Note: Power saver is automatically activated after the time-out of the screen saver to optimise battery life.

Banner

If your wireless service provider or network operator supports this feature, you can choose whether the display shows the operator logo or a custom banner, when the phone is in standby mode. Select

Menu

>

Settings

>

Display

>

Banner

>

Default

or

Personalise

.

46

9251716_2865_1_en_au_oth_v1.0.fm Page 47 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Power saver

When this feature is enabled, the display shows only a simplified display after a time-out period. Select

Menu

>

Settings

>

Display

>

Power saver

>

On

, or

Off

.

Sleep mode

Sleep mode

is a power-saving feature that turns the phone display off during inactivity. You can activate the sleep mode feature on your phone. Select

Menu

>

Settings

>

Display

>

Sleep mode

>

On

or

Off

.

When

Sleep mode

is activated the display is completely blank. A blinking

LED indicator shows that the phone is still on.

Backlight time-out

You can control the time-out of the backlight on your phone. Select

Menu

>

Settings

>

Display

>

Backlight time-out

.

Themes

Themes allows you to personalise the ringtone, screensaver and background on your phone. Select

Menu

>

Settings

>

Themes

>

Select theme

and a theme of your choice.

Tones

You can adjust the ringing volume, keypad tones, and more for the active profile. Select

Menu

>

Settings

>

Tones

and one of the following:

Incoming call alert

—Select how your phone will alert you when there is an incoming call:

Ringing

,

Ascending

,

Ring once

,

Beep once

,

Off

.

Ringing tone

—Select

Open Gallery

>

Tones

to select the ringing tone for incoming calls.

Incoming call video

>

Off

or

Incoming call video

—Select a video to be displayed when you receive an incoming call.

Ringing volume

—Use the scroll key to set the volume of your ringing tone.

Vibrating alert

—Activate the vibrating call alert. Select

On

to activate the vibrating alert.

Message alert tone

—Select the alert tone for incoming messages:

Off

,

Standard

,

Special

,

Beep once

,

Long & loud

,

Ringing tone

.

Keypad tones

—Scroll to set the volume of your keypad tones (or turn them off).

Warning tones

—Turn warning and confirmation tones on or off.

Alert for

—Set the phone to alert only when a member of a selected caller group calls. See “Set up caller groups”, p. 37 for more information.

47

9251716_2865_1_en_au_oth_v1.0.fm Page 48 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Time and date

Clock

Show or hide the clock

Select

Menu

>

Settings

>

Time and date

>

Clock

>

Show clock

or

Hide clock

.

Set the time

1. Select

Menu

>

Settings

>

Time and date

>

Clock

>

Set the time

.

2. Enter the time (in hh:mm format), and select

OK

.

3. Select

am

or

pm

(this option is displayed only when 12-hour format is in use).

Date

Show or hide the date

Select

Menu

>

Settings

>

Time and date

>

Date

>

Show date

or

Hide date

.

Set the date

Select

Menu

>

Settings

>

Time and date

>

Date

>

Set the date

, enter the date, and select

OK

.

Change the format

Select

Menu

>

Settings

>

Time and date

>

Date

>

Date format

or

Date separator

and the format of your choice.

Change the time zone

Select

Menu

>

Settings

>

Time and date

>

Clock

>

Time zone

and your time zone based on Greenwich Mean

Time (GMT), plus or minus hours in your time zone.

For example, GMT-8 is US Pacific time in Los Angeles, CA. GMT does not include Daylight savings time, so add or subtract accordingly.

Change the format

Select

Menu

>

Settings

>

Time and date

>

Clock

>

Time format

>

24-hour

or

12-hour

.

Auto-update of date and time

Auto-update is a network service.

See “Network services”, p. ix, for more information.

If your wireless service provider or network operator supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area (for example, when you have traveled to another network or time zone).

Select

Menu

>

Settings

>

Time and date

>

Auto-update of date & time

>

On

,

Confirm first

, or

Off

.

48

9251716_2865_1_en_au_oth_v1.0.fm Page 49 Friday, September 1, 2006 10:18 PM

S e t t i n g s

If you use the

Auto-update of date & time

option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you reenter your digital network.

You may may be prompted to enter the time manually, if the battery is removed or discharged while you are outside the digital network and the battery is installed or recharged while you are still outside of the digital network.

Call

Speed dial

To activate or deactivate

Speed dial

, select

Menu

>

Settings

>

Call

>

Speed dial

>

On

or

Off

. For more information on

Speed dial

, see “Set up speed dial”, p. 38.

Data and fax calls

Data and fax calling is a network service. See “Network services”, p. ix.

If your network operator supports this feature, you can set up the device to send or receive data and fax calls when connected to a device such as a PDA or

PC.

Anykey answer

When

Anykey answer

is on, briefly press any key except the right selection or end key to answer a call.

Select

Menu

>

Settings

>

Call

>

Anykey answer

>

On

or

Off

.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial.

With automatic redial activated, your phone redials the number, and notifies you once the network is available.

Select

Menu

>

Settings

>

Call

>

Automatic redial

>

On

or

Off

.

Receive data or fax calls

For better performance during data or fax calls, place the device on a stationary surface. Do not move the device or hold it in your hand during a data call.

If your wireless service provider or network operator supports this feature, you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected. See “Network services”, p. ix, for more information.

For more information on connectivity, refer to the PC/PDA Connectivity

Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at http://www.nokia-asia.com.

49

9251716_2865_1_en_au_oth_v1.0.fm Page 50 Friday, September 1, 2006 10:18 PM

S e t t i n g s

1. Select

Menu

>

Settings

>

Call

>

Data/fax calls

>

Incoming data/fax call

and view the following options:

Normal

—The phone receives incoming calls as usual.

Data calls only

—The phone receives only data calls.

Fax calls only

—The phone receives only fax calls.

2. Select

Data calls only

or

Fax calls only

.

3. When you are finished receiving the fax or data call, repeat steps 1 and 2, and select

Normal

.

View data transfer

You can view the transmission speed when sending or receiving data or fax calls. Select

Menu

>

Settings

>

Call

>

Data/fax calls

>

Data rate display

>

Graphic

or

Off

.

Call summary

Your phone can display the time spent on a call when you hang up.

Select

Menu

>

Settings

>

Call

>

Call summary

>

On

or

Off

.

Ringing tone for no caller ID

You can select a different ringing tone for calls received from a restricted number or with no caller ID. Select

Menu

>

Settings

>

Call

>

Ringing tone for no caller ID

>

On

or

Off

.

See “Personalise a profile”, p. 45 for more information on selecting a ringing tone.

Phone

Memory status

You can view the memory usage of your phone. Some or all of the following options are available on your phone. Select

Menu

>

Settings

>

Phone

>

Memory status

and one of the following possible options.

Free mem.

—Shows the amount of phone memory available for file storage.

Gallery

—Shows the amount of phone memory currently used for the Gallery.

Applications

—Shows the amount of phone memory currently used for applications.

Show call time on display

Your phone can display the call time during the phone call. Select

Menu

>

Settings

>

Call

>

Show call time on display

>

On

or

Off

.

Automatic keyguard

Automatic keyguard

allows you to automatically lock your phone after a defined time. Select

Menu

>

Settings

>

Phone

>

Automatic keyguard

>

On

or

Off

.

50

9251716_2865_1_en_au_oth_v1.0.fm Page 51 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Navigation key

If supported by your wireless service provider or network operator, you can set the features that are activated when you press the scroll key.

1. Select

Menu

>

Settings

>

Phone

>

Navigation key

.

2. Scroll in one direction, and select

Change

.

3. Select a function to assign to the action.

Fixed

—Use to send tones of the duration you specify in the

DTMF tone length

option.

Off

—Use to turn off tones. No tones are sent when you press a key.

Set length

You can specify DTMF tone length when using the

Fixed

option.

Select

Menu

>

Settings

>

Phone

>

DTMF tones

>

DTMF tone length

>

Short

(0.1 seconds) or

Long

(0.5 seconds).

DTMF tones

DTMF tones

are the tones that sound when you press the keys on your phone keypad. You can use

DTMF tones

for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password.

DTMF tones

are sent during an active call. You can send them manually from your phone keypad, or send them automatically by saving them in your phone.

Set type

Select

Menu

>

Settings

>

Phone

>

DTMF tones

>

Manual DTMF tones

and one of the following:

Continuous

—The tone sounds for as long as you press and hold a key.

Start-up tone

If the

Start-up tone

is activated, the tone sounds when you turn on your phone. Select

Menu

>

Settings

>

Phone

>

Start-up tone

>

On

or

Off

.

Help text activation

Your phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about

15 seconds and wait for the help text to display. Scroll to page through the full help text, if necessary.

The default setting for help text is on.

However, you can turn help text on or off.

Select

Menu

>

Settings

>

Phone

>

Help text activation

>

On

or

Off

.

51

9251716_2865_1_en_au_oth_v1.0.fm Page 52 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Voice commands

You can set up to five

Voice commands

, which allow hands-free operation of certain phone features.

When the phone finds the voice command tag,

Found:

appears, and the phone plays the recognised voice command tag through the earpiece.

The function you requested is activated.

Add a voice tag

Before using

Voice commands

, you must first add a voice tag to the phone function.

1. Select

Menu

>

Settings

>

Voice commands

.

2. Select a function option you wish to tag, and select

Add

.

3. Select

Start

, and speak the voice tag clearly into the microphone.

Do not select

Quit

unless you want to cancel the recording.

The phone replays then saves the recorded tag. appears next to the function option for which you add a voice tag.

Voice command options

You can modify voice command tags.

Select

Menu

>

Settings

>

Voice commands

, scroll to the voice command tag, and select one of the following options:

Playback

—Listen to the voice command tag.

Options

>

Change

—Change the voice command tag.

Options

>

Delete

—Erase the voice command tag.

Activate a voice command

After you have associated a voice command tag with a phone function, you can issue a command by speaking the voice command tag.

1. Select and hold

Names

.

2. When

Speak now

appears, pronounce the voice tag clearly into the microphone.

Connectivity

You can also connect the phone to a compatible PC using a USB data cable or an infrared connection; and use the phone as a modem to connect with a

PC. Remember to make back-up copies of important data.

For more information, see the Nokia PC

Suite online help. Nokia PC Suite and all related software can be downloaded from http://www.nokiaasia.com/pcsuite.

52

9251716_2865_1_en_au_oth_v1.0.fm Page 53 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Bluetooth connectivity

Bluetooth technology connectivity enables cost-free wireless connections between electronic devices and can be used to send and receive images, texts, gallery files, voice recordings, videos, notes, business cards, and calendar notes. It can also be used to connect wirelessly to products that use

Bluetooth wireless technology, such as computers. You can synchronise your phone and your PC using Bluetooth connectivity.

Since devices with Bluetooth connectivity communicate using radio waves, your phone and the other device do not need to be in direct line-of-sight.

The two devices only need to be within a maximum of 30 feet (10 meters) of each other. The connection can be subject to interference from obstructions such as walls or other electronic devices.

The Bluetooth wireless technology application whether used actively or in the background, consumes the battery and reduces the operating time of the phone.

This device is compliant with

Bluetooth Specification 2.0 and supports the following profiles:

• Object push profile (OPP)

• File transfer profile (FTP)

• Dial-up networking profile (DUN)

• Generic object exchange profile

(GOEP)

• Headset profile (HSP)

• Hands-free profile (HFP)

• Generic access profile (GAP)

• Service Discovery Protocol (SDP)

• Serial port profile (SPP)

To ensure interoperability between other devices supporting Bluetooth technology, use only enhancements approved by Nokia for this model.

Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using

Bluetooth technology in some locations. Check with your local authorities or service provider. If you want more information on this function, visit the Bluetooth

Technology organisation website: https://www.bluetooth.org/.

53

9251716_2865_1_en_au_oth_v1.0.fm Page 54 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Pairing

You can set up a permanent association (pairing) between your phone and another device with

Bluetooth technology. Some devices may require pairing before data transfer can take place.

To pair with a device, you and the owner of the other device must agree on a pass code of 1–16 numeric characters. The first time you try to connect the devices, you must each enter the same pass code. Once the devices are paired, you will not need to use the pass code again, so there is no need to remember it.

Paired devices are placed in your paired device list. You can view the list even when Bluetooth connectivity is not active or when the devices in the list are not available for connection.

Select

Menu

>

Settings

>

Connectivity

>

Bluetooth

>

Paired devices

>

Options

and one of the following:

Assign short name

—Give a nickname to the selected device (visible to you only).

Auto-conn. without confirmation

Select

No

, if you want the phone to connect to the selected device automatically or

Yes,

if you want the phone to ask for your permission first.

Delete pairing

—Delete the pairing to the selected device.

Pair new device

—Search for active devices with Bluetooth technology within range, scroll to the desired device, and select

Pair

to establish pairing with that device. Do not accept

Bluetooth connectivity from sources you do not trust.

Bluetooth connectivity settings

You can define how your phone is shown to other devices with Bluetooth connectivity. Select

Menu

>

Settings

>

Connectivity

>

Bluetooth

>

Bluetooth settings

and one of the following:

My phone's visibility

—Select

Perm. visibil.

to permanently show the phone to all other devices with Bluetooth connectivity,

Temp. visibil.

to show the phone to all other devices for two minutes only, or

Hidden

to show the phone only to the paired devices.

Operating the phone in hidden mode is a safer way to avoid malicious software.

My phone's name

—Change your phone name that is seen by other users.

Set up a connection

1. Select

Menu

>

Settings

>

Connectivity

>

Bluetooth

>

On

.

The active Bluetooth technology connection is indicated by at the top of the display.

2. Select

Search for audio enhancements

to search for

54

9251716_2865_1_en_au_oth_v1.0.fm Page 55 Friday, September 1, 2006 10:18 PM

S e t t i n g s

compatible devices with Bluetooth connectivity. The list of found devices appears in the display.

3. Select the desired device. If required, enter the Bluetooth connectivity pass code of the device to complete the pairing.

4. If required, enter the Bluetooth connectivity pass code of the device to pair with the device.

Your phone connects to the device.

You can start data transfer.

To view the device you are connected to, select

Menu

>

Settings

>

Connectivity

>

Bluetooth

>

Active device

.

To deactivate Bluetooth connectivity, select

Menu

>

Settings

>

Connectivity

>

Bluetooth

>

Off

.

Deactivation of the Bluetooth technology connection will not affect other functions of the phone.

Receive a data transfer

When a Bluetooth technology connection is active in your phone, you can receive notes, business cards, videos, and other types of data transfers from another device with

Bluetooth connectivity. When you receive a data transfer, an alarm sounds, and a message appears on the screen.

To view the transferred item immediately from standby mode, select

Show

. To view the item at a later time, select

Exit

.

Depending on the nature of the item, it is saved in the appropriate menu in your phone. For example, a business card would be saved in

Contacts

, and a calendar note would be saved in

Calendar

.

Send data

Instead of using the

Connectivity

menu, you can use other phone menus to send various types of data to other devices with Bluetooth connectivity.

For example, you can send a video from the

Video clip

folder of the

Gallery

menu. See the appropriate sections of the user guide for information about sending different types of data.

Data cable transfer

To transfer data from your phone to a compatible PC or from a compatible PC to your phone, use a CA-53 or a DKU-2

USB data cable. To disconnect the cable from the device, hold the connector, and remove the cable.

Important: Disconnect the

USB data cable from the phone to make a call.

55

9251716_2865_1_en_au_oth_v1.0.fm Page 56 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Enable default mode connection

Connect to your PC in

Default mode

to transfer phone data and files between your phone and PC using PC Suite.

1. Connect your PC and your phone with a USB data cable.

A notification is displayed that asks which mode you want to select.

2. Select

Accept

>

Default mode

.

A notification is displayed stating that a connection is active.

You can now use PC Suite to connect to your phone.

Disable data storage connection

1. To disable the USB data cable, double-click the green arrow on the task bar at the bottom of your

PC screen.

A window pops up that shows

Unplug or Eject Hardware.

2. Click on USB Device in the

Hardware devices window.

A popup window shows Stop a

Hardware device.

3. Scroll to a USB device, and click

OK.

The Safe to Remove Hardware popup window is displayed with the following message “The ‘USB

Device’ device can now be safely

removed from the system.

4. Click OK.

Enhancement

settings

The

Enhancement settings

menu displays the hearing aid compliant option by default, but shows other options only if the phone is or has been connected to a compatible enhancement type.

Headset

Select

Menu

>

Settings

>

Enhancements

>

Headset

and one of the following:

Default profile

—Choose the profile you wish to be automatically activated when a headset is connected.

Automatic answer

—Calls are answered automatically after one ring when a headset is connected. Select

On

or

Off

.

Note: Automatic answer will only be active whilst

Default profile

is active.

Handsfree

Select

Menu

>

Settings

>

Enhancements

>

Handsfree

and one of the following:

Default profile

—Choose the profile you wish to be automatically activated when a car kit is connected.

56

9251716_2865_1_en_au_oth_v1.0.fm Page 57 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Automatic answer

—Calls are answered automatically after one ring when a car kit is connected. Select

On

or

Off

.

Note:Automatic answer will only be active whilst

Default profile

is active.

Lights

—Choose to keep the phone lights always on, or to shut off automatically after several seconds.

Select

On

or

Automatic

.

Charger

Select

Menu

>

Settings

>

Enhancements

>

Charger

and one of the following:

Default profile

—Select the profile you want to activate automatically when your phone is connected to the charger.

Lights

—Select

On

or

Automatic

to keep the phone lights always on or to shut off automatically after several seconds.

Security

To access

Security

for the first time, you must enter the preset lock code.

By default, the the preset lock code may be a four digit number such as

1234 or 0000, or the last four digits of your phone number. If none of these work, contact your wireless service provider or network operator for help.

Phone lock

The phone lock feature protects your phone from unauthorised outgoing calls or unauthorised access to information stored in the phone.

When phone lock is activated,

Phone locked

is displayed each time you turn your phone on.

By default, the preset lock code is the last four digits of your phone number.

Depending on your wireless service provider or network operator, the preset lock code may be a four-digit number such as 1234 or 0000. If none of these work, contact your wireless service provider or network operator for help.

When the device is locked, you can still call the official emergency number programmed into your phone.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

3. Select

Phone lock

and one of the following:

Off

—Immediately turns off the phone lock feature.

Lock now

—Immediately turns on the phone lock feature.

On power-up

—Turns on the phone lock feature the next time you turn the phone on.

57

9251716_2865_1_en_au_oth_v1.0.fm Page 58 Friday, September 1, 2006 10:18 PM

S e t t i n g s

If you select

Lock now

, you must enter your lock code before the phone will function normally. After the lock code is accepted, your phone functions normally.

Call not allowed

appears if you attempt to place a call while your phone is locked.

To answer a call with phone lock on, select

Answer

, or press the call key.

Allowed number when phone locked

With phone lock on, the only outgoing calls you can make are to the emergency number programmed into your phone and the numbers stored in the

Allowed no. when phone locked

location.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

3. Select

Allowed no. if lock active

>

Assign

and one of the three slots.

4. Enter the phone number, or select

Search

to retrieve the number from the phone book; select

OK

.

To place a call to an allowed number when the phone is locked, enter the allowed number and press the call key.

Change lock code

When changing the lock code, avoid using codes similar to emergency numbers to prevent accidental dialling of an emergency number.

If you enter an incorrect lock code five times in a row, your phone may ask you for the security code. By default, the security code is the five-digit number,

12345.

To change the phone lock code, do the following:

1. Select

Menu

>

Settings

>

Security

.

2. Enter the current lock code, and select

OK

.

3. Select

Change lock code

.

4. Enter the new lock code (only 4 characters), and select

OK

.

5. Enter the new lock code again for verification, and select

OK

.

When you change your lock code, make sure to remember it. If necessary, write it down and store it in a safe place away from your phone.

Call restrictions

Call restrictions

allows you to block or permit numbers for incoming or outgoing calls.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

58

9251716_2865_1_en_au_oth_v1.0.fm Page 59 Friday, September 1, 2006 10:18 PM

S e t t i n g s

3. Select

Call restrictions

and the type of calls you wish to restrict:

Restrict outgoing calls

—Set restrictions on making calls.

Restrict incoming calls

—Set restrictions on receiving calls.

4. Select whether to block or allow numbers:

Blocked numbers

—Set numbers that are blocked on incoming calls, allowing all other numbers. When a number is blocked, the call is sent to voice mail.

Allowed numbers

—Set numbers that are allowed, blocking all other numbers.

5. To modify the restriction list, select from the following options:

Select

—Add numbers to the restriction list.

Add restriction

—Add a restriction to a number (unavailable if memory is full).

Edit

—Edit a restriction on a number.

Delete

—Delete a number from restriction list.

When calls are restricted, calls may be possible to the official emergency number programmed into your device.

Voice privacy

Voice privacy

is a network service, and its function depends on a variety of services. Contact your service provider for more information.

If your wireless service provider or network operator supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

3. Select

Voice privacy

>

On

or

Off

.

Application settings

The

Application settings

menu changes game and application settings.

Select

Menu

>

Settings

>

Application settings

and one of the following:

Application sounds

>

On

or

Off

—Play sounds during an application.

Application lights

>

App. defined

or

Default

—Play lights during an application.

Application vibration

>

On

or

Off

Vibrate phone during an application.

59

9251716_2865_1_en_au_oth_v1.0.fm Page 60 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Network

The menu options you see in your phone are based on your service provider’s network. The network determines which options actually appear in the phone menu. Check with your service provider for more information.

The

Network

menu customises the way your phone chooses a network in which to operate while you are within or outside of your primary or home system. Your phone is set to search for the most cost-effective network.

If your phone cannot find a preferred network, it selects a network automatically based on the option you choose in the

Network

menu.

applies when not in the home service area.

Automatic A

—The phone automatically searches for service in another digital network. The roaming rate applies when not in the home service area.

Automatic B

—The phone automatically searches for service in another digital network. If one is not found, the phone uses analog service. The roaming rate applies when not in the home service area.

Roaming options

If supported by your wireless service provider or network operator, you can select which roaming option you wish to use. Depending on your service provider, some options may be different or may not appear.

Select

Menu

>

Settings

>

Network

>

Roaming options

and one of the following.

Home only

—You can make and receive calls in your home area only.

Automatic

—The phone automatically searches for service in another digital network. If one is not found, the phone uses analog service. The roaming rate

Mode

If supported by your wireless service provider or network operator, you can choose whether your phone will use digital or analog service. Depending on your service provider, some options may be different or may not appear.

Select

Menu

>

Settings

>

Network

>

Mode

and one of the following.

Digital preferred

—You prefer to make calls on a digital network, but will find another network, if necessary.

Analog only

—You can make and receive calls on an analog network only.

Analog per call

—You can select an analog network on a call to call basis.

IS-95 per call

—You can select an IS-95 network on a call to call basis.

Digital only

—You can make and receive calls on a digital network only.

60

9251716_2865_1_en_au_oth_v1.0.fm Page 61 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Network services

The following features are network services. See also “Network services”, p. ix.

Store a feature code

Network feature setting

allows you to activate network services in your phone using feature codes received from your service provider.

1. Select

Menu

>

Settings

>

Network services

>

Network feature setting

.

2. Enter the feature code from your service provider (for example, *900 for activating

Divert if busy

), and select

OK

.

3. Select

Call divert

.

4. Scroll to the type of diverting that matches the feature code you entered (for example,

Divert if busy

), select

Activate

.

The activated feature code is now stored in your phone, and you are returned to the

Feature code:

prompt.

Continue entering other feature codes

(for example, *900 to cancel

Divert if busy

), or press the end key to return to standby mode.

When you enter a network feature code successfully the feature becomes visible in the

Network services

menu.

Call divert

Call divert tells your network to redirect incoming calls to another number.

Call divert

is a network service and may not work the same in all networks, so contact your wireless provider for availability and information.

To activate, do the following:

1. Select Menu > Settings > Network services >

Call divert

and one of the following:

Divert all calls

—Divert all calls to the number you specify.

2. Select

Activate

.

3. Enter the number to which your calls, data, or other information are diverted, and select

OK

.

To cancel, select Menu > Settings >

Network services >

Call divert

>

Cancel all call diverting .

Cancel all call diverting

may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.

My number selection

Select

Menu

>

Settings

>

Network services

>

My number selection

.

This feature is carrier dependent.

61

9251716_2865_1_en_au_oth_v1.0.fm Page 62 Friday, September 1, 2006 10:18 PM

S e t t i n g s

Restore factory

settings

You can reset some of the menu settings to their original values.

Data that you have entered or downloaded is not deleted

(for example, entries in your contacts list are not affected).

1. Select

Menu

>

Settings

>

Restore factory sett.

2. Enter the lock code, and select

OK

.

Note: Depending on your wireless service provider or network operator, your device may request the security code

(defaulted to 12345) instead of the lock code.

Phone details

You can view the current details of your phone. Select

Menu

>

Settings

>

Phone details

and one of the following options:

User details

—Shows the phone’s current number details.

Version details

—Shows the hardware, software and browser version information for the phone.

System details

—Shows the digital network the phone is on.

Icon details

—Shows the icons used.

62

9251716_2865_1_en_au_oth_v1.0.fm Page 63 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

10. Organiser

Your phone contains features to help organise your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch.

Alarm clock

Set an alarm

The alarm clock is based on the phone clock. It sounds an alert any time you specify and even works if the phone is turned off.

1. Select

Menu

>

Organiser

>

Alarm clock

>

Alarm time

.

2. Enter the time for the alarm in hh:mm format, and select

OK

.

3. Select

am

or

pm

if 12-hour clock format is on.

Alarm on

appears briefly in the display, and appears in standby mode.

If you need to reset the alarm select

Menu

>

Organiser

>

Alarm clock

>

Alarm time

>

On

from standby mode.

To turn off the alarm, select

Menu

>

Organiser

>

Alarm clock

>

Alarm time

>

Off

from standby mode.

Repeat alarm

You can set the alarm to repeat every day or only on certain days of the week.

1. Select

Menu

>

Organiser

>

Alarm clock

>

Repeat alarm

>

On

.

2. Check the day or days of the week you wish to repeat the alarm, and select

Mark

. Select

Unmark

to remove a day.

3. Select

Done

when you have added all desired days.

If you need to revise the days for a repeated alarm, select

Menu

>

Organiser

>

Alarm clock

>

Repeat alarm

>

Repetition days

from standby mode.

If you need to stop a repeated alarm, select

Menu

>

Organiser

>

Alarm clock

>

Repeat alarm

>

Off

in standby mode.

Set the alarm tone

To set which tone to play when the alarm sounds, select

Menu

>

Organiser

>

Alarm clock

>

Alarm tone

>

Standard

,

Radio

, or

Open Gallery

to choose the tone you want to use.

63

9251716_2865_1_en_au_oth_v1.0.fm Page 64 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

If you set your alarm to

Radio

, use an accessory that supports FM stereo.

Set the snooze time-out

You can set the

Snooze time-out

for the alarm.

Select

Menu

>

Organiser

>

Alarm clock

>

Snooze time-out

and choose a snooze time.

When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the currently active profile), and lights up.

With the phone on, select

Stop

to shut the alarm off or

Snooze

. If you select

Snooze

, the alarm stops for 10 minutes.

If you do not press a key, the alarm stops (snoozes) for the

Snooze time-out

, then sounds again.

If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you select

Stop

, the device asks whether you want to activate the phone for calls. Select

No

to switch off the device or

Yes

to make and receive calls. Do not select

Yes

when wireless phone use may cause interference or danger.

Calendar

The calendar keeps track of reminders, calls you need to make, meetings, memo, and birthdays. It can even sound an alarm for any of these events.

The default monthly view provides an overview of the selected month and weeks. You can also jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. A short summary of notes for the day appear at the bottom of the screen.

Open calendar

Select

Menu

>

Organiser

>

Calendar

.

Scroll to move the cursor in the calendar view.

Calendar options

Select

Menu

>

Organiser

>

Calendar

>

Options

and one of the following:

Week view

—View your calendar by weeks. To return to month view select

Back

, while in the

Week view

.

Make a note

—Create a note on the selected date.

Go to date

—Jump to a specific date.

Enter the date (for example, 15/07/

2005), and select

OK

.

Go to today

—Jump to the current date.

Settings

—Modify the calendar settings.

64

9251716_2865_1_en_au_oth_v1.0.fm Page 65 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Go to to-do list

—Go directly to your to-do list.

Delete all notes

—Delete all calendar notes. This option appears only if a calendar note has been created.

Memo

—Enter the subject, and select

Save

. Enter a start and end date. Choose an alarm option.

Reminder

—Enter the reminder, and select

Save

. Choose an alarm option.

Make a calendar note

You can make a calendar note for a specific date. You can choose from five types of notes. Your phone asks for further information depending on which note you select. You can also set an alarm for your note.

1. Select

Menu

>

Organiser

>

Calendar

.

2. Scroll to the date for which you want to make a note. Scroll or select

Options

>

Go to date

.

3. Select

Options

>

Make a note

and one of the following:

Meeting

—Enter the subject, and select

Save

. Enter a location, and select

Save

. Enter a start and end time. Choose an alarm option.

Call

—Enter the phone number, and select

Save

. Enter a name, and select

Save

. Enter a time. Choose an alarm option. You can also select

Options

>

Search

to search your contacts.

Birthday

—Enter the person’s name, and select

Save

. Enter the year of birth. Choose an alarm option.

View calendar notes

(day view)

You can view the calendar notes for a day.

1. Select

Menu

>

Organiser

>

Calendar

.

2. Scroll to the date you want to view or select

Options

>

Go to date

. Days with notes appear in bold type.

3. Select

View

to see the list of notes for that day.

To view a specific note, scroll to the note, and select

View

again. If there are no notes for that date, select

Add note

to create a new calendar note.

Options while viewing a day

When viewing the list of notes for a day, you can scroll to a note, select

Options

and one of the following:

Make a note

—Create a new note for the selected date.

Delete

—Delete the note.

Edit

—Edit the note.

Use detail

—Use a detail contained in the note.

65

9251716_2865_1_en_au_oth_v1.0.fm Page 66 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Move

—Move the note to another date on your calendar.

Repeat

—Enable the note to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly).

Repeat

is not available for

Birthday

note.

Go to date

—Jump to another date on your calendar.

Go to today

—Return to the current date.

Send note

>

Send as message

,

Via calendar

,

Via infrared

, or

Via

Bluetooth

—Send a calendar note in calendar format (vCal), in a text message, in a multimedia message, or directly to another device.

Copy

—Copy the note. You can paste the note to another date.

Settings

—Modify the calendar settings.

Go to to-do list

—Go directly to your to-do list.

Receive a note in calendar format (vCal)

When you receive a calendar note in calendar-to-calendar format (vCal), your phone displays

Calendar note received

.

Select

Show

to view the calendar note.

Select

Save

to save the note to your calendar or

Options

>

Discard

to discard the note.

Modify calendar settings

Select

Menu

>

Organiser

>

Calendar

>

Options

>

Settings

and one of the following:

Set the date

—Enter the current date, and select

OK

. Appears only when the date has not yet been set.

Set the time

—Enter the current time, and select

OK

. Appears only when the time has not yet been set.

Time zone

—Select your current time zone.

Date format

—Select your preferred date format.

Date separator

—Select your preferred date separator.

Time format

—Select your preferred time format.

Default view

—Select a monthly or weekly view.

Week starts

—Select the day the week starts.

Auto-delete notes

—Select when to delete past notes.

Notes

You can write text notes with the

Notes

. You can also send notes using text messaging or Bluetooth connectivity.

Select

Menu

>

Organiser

>

Notes

to see your current list of notes. If there are no notes, select

Add note

to create

66

9251716_2865_1_en_au_oth_v1.0.fm Page 67 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

a note. If there are existing notes, scroll to a note, and select

View

.

Create your note, and select

Save

.

To write additional notes, select

Menu

>

Organiser

>

Notes

>

Options

>

Make a note

. Create your note, select any note options, and select

Save

.

When you create a note, the following options are available:

Insert time & date

—Adds the time and date to your note.

Close

—Returns you to the notes list.

Insert smiley

—Inserts a smiley into your message.

Insert word

or

Edit word

—Enter or edit the text of a new word that might not appear in the predictive text dictionary. Option only appears when predictive text is on.

Insert symbol

—Inserts a special character into your message. Option only appears when predictive text is on.

Prediction on

or

Prediction off

—Turn predictive text on or off.

Matches

—View matches found in the predictive text dictionary for the word you want to use. This displays only when predictive text is on.

Send a note

1. Select

Menu

>

Organiser

>

Notes

.

2. Scroll to the note you wish to send, and select

Options

>

Send note

>

Send as message

,

Via infrared

, or

Via Bluetooth

to send the note in a text message, in a multimedia message, or directly to another device.

Notes options

Select

Menu

>

Organiser

>

Notes

>

Options

and one of the following:

Make a note

—Create a new note.

Delete

—Delete the note you selected.

Edit

—Edit the note you selected.

Use detail

—Use a detail contained in the note.

Send note

>

Send as message

,

Via infrared

, or

Via Bluetooth

—Send a note in a text message, in a multimedia message, or directly to another device.

Delete all notes

—Delete all notes.

The note options appear only when you have created one or more notes.

To-do list

Use the

To-do list

feature to keep track of your tasks. You can save a task or errand as a to-do list note, select a priority level for the to-do list note, and mark it as done when you have

67

9251716_2865_1_en_au_oth_v1.0.fm Page 68 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

completed it. You can sort the to-do list notes by priority or by date.

Select

Menu

>

Organiser

>

To-do list

.

You see your current to-do list.

If there are no to-do tasks, select

Add note

to create your first to-do list note.

If there are existing to-do list notes, scroll to a to-do list note, and select

View

.

Select

Menu

>

Organiser

>

To-do list

>

Add note

. Enter the subject, and select

Save

>

High

,

Medium

, or

Low

.

To write additional notes, select

Menu

>

Organiser

>

To-do list

>

Options

>

Add

. Enter the subject, and select

Save

>

High

,

Medium

, or

Low

.

When you create a to-do list note, the following options are available:

Search

—Search for existing notes.

Insert smiley

—Insert a smiley into your message.

Insert word

or

Edit word

—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when predictive text is on.

Insert symbol

—Insert a special character into your message.

This displays only when predictive text is on.

Prediction on

or

Prediction off

—Turn predictive text on or off.

Matches

—View matches found in the predictive text dictionary for the word you want to use. This displays only when predictive text is on.

To edit the notes, select

Menu

>

Organiser

>

To-do list

>

View

>

Edit

.

Edit the subject, select

Save

.

To view to-do list notes, select

Menu

>

Organiser

>

To-do list

>

View

>

Options

, and one of the following choices:

Deadline

—Change the deadline of the to-do list note.

Mark note as done

or

Mark as not done

—Indicate whether the to-do list note is completed or not.

Delete

—Delete the to-do list note.

Use detail

—Use a detail contained in the note.

Edit priority

—Change the priority to

High

,

Medium

, or

Low

.

Send

>

Send as message

,

Via calendar

,

Via infrared

, or

Via Bluetooth

—Send the to-do list note.

Go to calendar

—Leave the to-do list, and go to the calendar.

Save to calendar

—Save the to-do list note to your calendar.

68

9251716_2865_1_en_au_oth_v1.0.fm Page 69 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Send a to-do list note

1. Select

Menu

>

Organiser

>

To-do list

.

2. Scroll to the note you wish to send, and select

Options

>

Send

>

Send as message

,

Via calendar

,

Via infrared

, or

Via Bluetooth

to send the to-do list note in calendar format (vCal), in a text message, in a multimedia message, or directly to another device.

To-do list options

Select

Menu

>

Organiser

>

To-do list

>

Options

and one of the following:

Add

—Create a new to-do list note.

Delete

—Delete the to-do list note you selected.

Mark note as done

or

Mark as not done

—Indicate whether the to-do list note is completed or not.

Use detail

—Use a detail contained in the note.

Sort by deadline

or

Sort by priority

Sort the to-do list by either date or priority.

Send

>

Send as message

,

Via calendar

,

Via infrared

, or

Via Bluetooth

—Send the to-do list note in calendar format

(vCal), in a text message, in a multimedia message, or directly to another device.

Go to calendar

—Leave the to-do list, and go to the calendar.

Save to calendar

—Save the to-do list note you selected to your calendar.

Delete done notes

—Delete the to-do list note you selected from your calendar.

Delete all notes

—Delete all the to-do list notes.

The to-do list options appear only when you have created one or more notes.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.

Note: This calculator has a limited accuracy and is designed for simple calculations.

To use the calculator:

1. Select

Menu

>

Organiser

>

Calculator

.

2. Enter the first number in the calculation.

Press # for a decimal point if necessary.

Press the scroll key up or down to change the sign of your number or value.

69

9251716_2865_1_en_au_oth_v1.0.fm Page 70 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Press * to cycle through the add (+), subtract (-), multiply (*), and divide

(/) characters. Pause briefly to select the displayed character.

3. Enter the second number in your calculation.

4. Select

Equals

.

To perform a square or square root calculation, select

Options

>

Square

or

Square root

.

2. Enter the exchange rate (press # to insert a decimal), and select

OK

.

3. Select

Back

to return to the

Calculator

screen, and enter the currency amount to convert.

4. Select

Options

>

To home

or

To foreign

.

To home

—Converts foreign currency to domestic currency.

To foreign

—Converts domestic currency to foreign currency.

5. If you have not already entered an exchange rate, the device prompts you to enter it. Select

OK

. You can edit the exchange rate at any time.

Currency converter

You can convert foreign currency to domestic, or vice versa, directly from standby mode or from the

Calculator

menu.

Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero.

1. Select

Menu

>

Organiser

>

Calculator

>

Options

>

Exchange rate

>

Foreign unit in domestic units

or

Home units in foreign units

.

Foreign unit in domestic units

—The number of home units it takes to make one unit of foreign currency.

Home units in foreign units

—The number of foreign units it takes to make one unit of your home currency.

Timers

Your device contains two event timers: a normal timer that counts down a set interval, and an interval timer that counts up set intervals.

The timers only work when the phone is on. Once you turn off your phone, the timers are no longer active.

Normal timer

This countdown timer enables you to enter a specific duration (up to 99 hours, 59 minutes, and 59 seconds).

When the time runs out, your device sounds an alarm.

To set the normal timer:

70

9251716_2865_1_en_au_oth_v1.0.fm Page 71 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

1. Select

Menu

>

Organiser

>

Timer

>

Normal timer

.

2. Enter the time (in hh:mm:ss format), and select

OK

.

3. Enter a note for the timer, and select

Start

.

and the timer (in hh:mm:ss format) appear in standby mode when the countdown timer is running.

When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights. If you are in standby mode, select

Restart

or

Exit

. If you are not in standby mode, press any key during the alarm to stop the timer.

After 60 seconds the timer alert expires automatically. Select

Exit

or press the end key to clear the timer note.

To change the time:

1. Select

Menu

>

Organiser

>

Timer

>

Change time

.

2. Enter the new time, and select

OK

.

3. Leave the note as it was, or enter a new note, and select

Start

.

To stop the timer before the alarm sounds, select

Menu

>

Organiser

>

Timer

>

Stop timer

.

Interval timer

The interval timer in your device allows you to store multiple interval timers.

You can define and store up to 10 timing periods for each interval timer.

Once at least one interval timer is set and stored, you can select the interval timer and one of the stored intervals for that timer. When the selected interval expires, your phone sounds an alarm, vibrates, and flashes its lights.

To set an interval timer:

1. Select

Menu

>

Organiser

>

Timer

>

Interval timer

.

2. Select

Add new timer

. This option only appears if you have already created an interval timer.

3. Enter a name for the timer, and select

Save

.

4. Enter a name for the first timer period, and select

Save

.

5. Enter the desired time interval, and select

OK

.

6. Select an existing stored period and

Edit period

,

Add period

,

Delete period

, or

Start timer

.

To use an interval timer:

1. Select

Menu

>

Organiser

>

Timer

>

Interval timer

, and one of the set interval timers.

Add new timer

is the only choice if you have not yet set any interval timers.

2. Select

Start timer

,

View timer

,

Edit timer

,

Add new timer

, or

Delete timer

. These options only appear if you have already created an interval timer.

71

9251716_2865_1_en_au_oth_v1.0.fm Page 72 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.

Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.

lap time. The clock stops, then immediately restarts from zero.

The lap time appears below the running time. Each time you select

Lap

, the new measured time appears at the beginning of the list.

The maximum number of laps is 20.

2. Select

Stop

to end timing and display total time.

Measure split or lap time

Use the split time or lap time functions for activities where you need to pace yourself.

1. Select

Menu

>

Organiser

>

Stopwatch

>

Split timing

or

Lap timing

>

Start

.

Split timing

—Use the split time function for such activities as a long distance race when you need to pace yourself. Select

Split

to note the lapsed time. The timer continues to run and the split time appears below the running time.

Each time you select

Split

, the new measured time appears at the beginning of the list. The maximum number of splits is 20.

Lap timing

—Use the lap time function when you want to track how long it takes to complete each cycle or lap. Select

Lap

to note the

Save a time

To save a time while the clock is running, select

Stop

>

Save

, enter a name for the measurement, and select

OK

. If you do not enter a name, the total time is used as the default title for the lap or split time.

Stopwatch options

Select

Menu

>

Organiser

>

Stopwatch

and one of the following:

Continue

—Continues to measure time.

Only appears if clock is running and you are returning to stopwatch screen.

Show last time

—View the last measured time.

Split timing

—Use the split time function.

Lap timing

—Use the lap time function.

View times

—Browse saved times.

Delete times

>

One by one

or

Delete all

—Delete saved times.

72

9251716_2865_1_en_au_oth_v1.0.fm Page 73 Friday, September 1, 2006 10:18 PM

O r g a n i s e r

Operation note

If you press the end key and return to standby mode, the clock continues to run in the background, and appears at the top of the screen.

To return to the

Stopwatch

screen, do the following:

1. Select

Menu

>

Organiser

>

Stopwatch

>

Continue

.

2. To stop the clock, select

Stop

.

73

9251716_2865_1_en_au_oth_v1.0.fm Page 74 Friday, September 1, 2006 10:18 PM

E x t r a s

11. Extras

Games

Select

Menu

>

Extras

>

Games

to display the games on your device.

Select

Options

to see additional choices.

Collection

Select

Menu

>

Extras

>

Collection

> and select an application. Select

Options

to see additional choices.

An application may require a few seconds to load. When the launch screen disappears, the application is ready.

Leaving applications running in the background increases the demand on battery power and reduces the battery life.

Note: Only install applications from sources that offer adequate protection against harmful software.

To view the memory available for application installations. Select

Menu

>

Extras

>

Collection

>

Options

>

Memory status

.

74

9251716_2865_1_en_au_oth_v1.0.fm Page 75 Friday, September 1, 2006 10:18 PM

M i n i b r o w s e r

12. Minibrowser

Minibrowser

is a network service.

See “Network services”, p. ix, for more information.

Your phone has a built-in mobile Web browser you can use to connect to selected services on the mobile internet. If your wireless service provider or network operator supports this feature, you can view weather reports, check news or flight times, view financial information, and much more. The Web browser on your phone can display WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with

Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any internet site.

If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The service provider secures the data transmission between the gateway and the content server.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

Mobile internet

access

Because mobile internet content is designed to be viewed from your phone, your wireless provider is now your mobile internet service provider as well.

Your wireless provider has created a home page and set up your browser to go to this page when you log on to the mobile internet. Once at your service provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your phone.

Normally this is done by your wireless provider when you subscribe to the feature. Contact your wireless provider if you have problems using the browser.

Sign on to the mobile

internet

Select

Menu

>

Minibrowser

.

After a brief pause, your phone attempts to connect to your wireless provider’s home page. If you receive an error message, your phone may not be set up for browsing. Contact your wireless provider to make sure that your phone is configured properly.

75

9251716_2865_1_en_au_oth_v1.0.fm Page 76 Friday, September 1, 2006 10:18 PM

M i n i b r o w s e r

Navigate the mobile

internet

Since your phone screen is much smaller than a computer screen, mobile internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a WAP site.

Phone keys

• To browse the WAP site, scroll up or down.

• Select a highlighted item.

• To enter text, press # to switch text input modes, and then press 0-9.

• To enter special characters, press *.

incoming calls are automatically forwarded to voice mail.

Make an emergency call while online

You can end your data connection and make an emergency call.

1. To close your mobile internet connection, press the end key.

2. Press the end key as many times as needed to clear the display and ready the phone for calls.

3. Enter the emergency number for your present location. Emergency numbers vary by location.

4. Press the call key.

Receive a call while online

Depending on your wireless service provider or network operator, you may still be able to receive a voice call while using the WAP browser.

• To answer the incoming call, press the call key.

• To reject the incoming call, press the end key.

After you end your voice call, the mobile internet connection automatically resumes.

If your wireless service provider or network operator does not support incoming calls while browsing,

Clear the cache and disconnect

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache.

To empty the cache while in the browser menu, select Navigate >

Advanced > Clear. Scroll to and select

Cache > Clear. The cache also clears when you press and hold the end key to power off your device.

76

9251716_2865_1_en_au_oth_v1.0.fm Page 77 Friday, September 1, 2006 10:18 PM

M i n i b r o w s e r

To close your mobile internet connection while browsing, press the end key.

77

9251716_2865_1_en_au_oth_v1.0.fm Page 78 Friday, September 1, 2006 10:18 PM

P C c o n n e c t i v i t y

13. PC connectivity

PC data transfer

You can transfer data, such as music, photos, and videos, from your device to a compatible PC or from a compatible

PC to your device using Bluetooth or infrared connectivity. For more information, see “Connectivity”, p. 52.

Nokia PC Suite

Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data. Each component is a separate program that includes online helps.

Nokia PC Suite software, installation instructions, and other documentation is provided free of charge and can be downloaded from the software downloads of the Nokia web site: http://www.nokia-asia.com/pcsuite.

Some of the features in your phone require network support. Contact your service provider for availability and configuration instructions.

78

9251716_2865_1_en_au_oth_v1.0.fm Page 79 Friday, September 1, 2006 10:18 PM

E n h a n c e m e n t s

14. Enhancements

Check the model number of any charger before use with this device.

This device is intended for use when supplied with power from the AC-3 or

AC-4 charger.

Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model.

The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

• Installation of any complex car enhancements must be made by qualified personnel only.

Power

• Standard Li-ion Battery (BL-6C)

• Compact Charger (AC-3)

• Travel Charger (AC-4)

• Mobile Charger (DC-4)

• Charger Adapter (CA-44)

Use the CA-44 charger adapter to connect the phone with Nokia chargers with a larger barrel size, including ACP-7, ACP-8, ACP-9,

ACP-12, AC-1 (retractable charger), and LCH-12 (mobile charger).

USB data cable

• Connectivity Cable (CA-53)

• Connectivity Cable (DKU-2)

Handsfree

• Headrest Handsfree (BHF-3)

• CDMA Headrest Handsfree (BHF-4)

79

9251716_2865_1_en_au_oth_v1.0.fm Page 80 Friday, September 1, 2006 10:18 PM

E n h a n c e m e n t s

• Easy to Use Car Handsfree (HF-3)

• Advanced Plug-in Car Handsfree

(HF-6)

• Wireless Plug-in Car Handsfree

(HF-6W)

Headsets

• Mono Headsets (HDB-4, HS-5,

HS-6, HS-8)

• Stereo Headsets (HDS-3, HS-3,

HS-23)

• Wireless Mono Headsets (HDW-3,

HS-4W, HS-11W, HS-21W,

HS-36W, HS-37W)

• Wireless Image Headsets (HS-13W)

• Wireless Stereo Headsets

(HS-12W)

Miscellaneous

• Inductive Loopset (LPS-4)

• TTY Adapter (HDA-10)

• Advanced Car Kit (CK-1W)

• Wireless Car Kit (CK-7W)

• Digital Pen (SU-1B)

• Audio Adapter (AD-15)

• Music Stand (MD-1)

80

9251716_2865_1_en_au_oth_v1.0.fm Page 81 Friday, September 1, 2006 10:18 PM

R e f e r e n c e i n f o r m a t i o n

15. Reference information

This section provides information about your phone batteries, enhancements, chargers, and safety guidelines. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change.

Batteries and

chargers

Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.

If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.

Unplug the charger from the electrical plug and the device when not in use.

Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime.

If left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery that is damaged.

Do not short-circuit the battery.

Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.)

This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and

77°F). A device with a hot or cold

81

9251716_2865_1_en_au_oth_v1.0.fm Page 82 Friday, September 1, 2006 10:18 PM

R e f e r e n c e i n f o r m a t i o n

battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original

Enhancements logo when looking from another angle.

Nokia battery

authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, look for the Nokia Original

Enhancements logo on the packaging and inspect the hologram label using the following steps:

Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorised

Nokia service point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the battery for authenticity. If authenticity

2. When you angle the hologram left, right, down, and up, you should see

1, 2, 3, and 4 dots on each side respectively.

3. Scratch the side of the label to reveal a 20-digit code, for example,

12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.

82

9251716_2865_1_en_au_oth_v1.0.fm Page 83 Friday, September 1, 2006 10:18 PM

R e f e r e n c e i n f o r m a t i o n

4. Confirm that the 20-digit code is valid by following the instructions at www.nokiaoriginals.com/check.

To create a text message enter the

20-digit code, for example,

12345678919876543210, and send to

+44 7786 200276.

To create a text message,

• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example,

12345678919876543210, and send to +61 427151515.

• For India only: Enter Battery followed by the 20-digit battery code, for example,

Battery 12345678919876543210, and send to 5555.

National and international operator charges will apply.

You should receive a message indicating whether the code can be authenticated.

If you need assistance confirming the battery code, contact your local

Nokia Care Centres listed at www.nokia-asia.com/ carecentrelocator.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.

To find out more about original

Nokia batteries, visit www.nokiaoriginals.com/battery.

83

9251716_2865_1_en_au_oth_v1.0.fm Page 84 Friday, September 1, 2006 10:18 PM

C a r e a n d m a i n t e n a n c e

16. Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.

If your device does get wet, remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use only the supplied or an approved replacement antenna.

Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and calendar notes, before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service.

84

9251716_2865_1_en_au_oth_v1.0.fm Page 85 Friday, September 1, 2006 10:18 PM

A d d i t i o n a l s a f e t y i n f o r m a t i o n

17. Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

device, because information stored on them may be erased.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Operating

environment

Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.

This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least

2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.

To transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic.

Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of

15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.

These recommendations are consistent with the independent research by and recommendations of Wireless

Technology Research. Persons with pacemakers should:

85

9251716_2865_1_en_au_oth_v1.0.fm Page 86 Friday, September 1, 2006 10:18 PM

A d d i t i o n a l s a f e t y i n f o r m a t i o n

• Always keep the device more than

15.3 centimeters (6 inches) from the pacemaker;

• Not carry the device in a breast pocket; and

• Hold the device to the ear opposite the pacemaker to minimise the potential for interference.

If you suspect interference, switch off your device and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids.

If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements.

For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft.

The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Potentially explosive

environments

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with

86

9251716_2865_1_en_au_oth_v1.0.fm Page 87 Friday, September 1, 2006 10:18 PM

A d d i t i o n a l s a f e t y i n f o r m a t i o n

a potentially explosive atmosphere are often but not always clearly marked.

They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas

(such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.

call. Consult this guide or your service provider.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

Emergency calls

Important: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.

To make an emergency call:

1. If the phone is not on, switch it on.

Check for adequate signal strength.

2. Press the end key as many times as needed to clear the display and ready the phone for calls.

3. Enter the official emergency number for your present location.

Emergency numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before you can make an emergency

Certification

information (SAR)

THIS DEVICE MEETS INTERNATIONAL

GUIDELINES FOR EXPOSURE TO RADIO

WAVES

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency

(RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.

The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies.

The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit stated in the international guidelines is

2.0 watts/kilogram (W/kg)*. Tests for

87

9251716_2865_1_en_au_oth_v1.0.fm Page 88 Friday, September 1, 2006 10:18 PM

A d d i t i o n a l s a f e t y i n f o r m a t i o n

SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device.

The highest SAR value for this device when tested for use at the ear is

0.60 W/kg.

SAR values may vary depending on national reporting and testing requirements and the network band.

Use of device accessories and enhancements may result in different

SAR values. Additional SAR information may be provided under product information at www.nokia-asia.com.

* The SAR limit for mobile devices used by the public is 2.0 W/kg averaged over

10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions, please look under product information at www.nokia.com.

Battery information

This section provides information about battery charging times with the

Compact Charger (AC-3), the Travel

Charger (AC-4), talk-times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.

Charging times

The following charging times are approximate with the BL-6C Li-ion battery:

Travel Charger (AC-4): up to 1 hour

45 minutes

Compact Charger (AC-3): up to 3 hours 45 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.

Talk time: 3 to 4 hours (digital)

Standby time: 6 to 10 days

88

9251716_2865_1_en_au_oth_v1.0.fm Page 89 Friday, September 1, 2006 10:18 PM

MANUFACTURER’S LIMITED WARRANTY

NOTE! This Limited Warranty is in addition to, and does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products.

Nokia Corporation (“Nokia”) provides this Limited Warranty to person who has purchased the Nokia product(s) included in the sales package (“Product”).

Nokia warrants to you that during the warranty period Nokia or a Nokia authorised service company will in a commercially reasonable time remedy defects in materials, design and workmanship free of charge by repairing or, should Nokia in its absolute discretion deem it necessary, replacing the Product in accordance with this Limited

Warranty (unless otherwise required by law). This Limited Warranty is only valid and enforceable in the country where you have purchased the Product provided that it is intended for sale in that country.

Warranty Period

The warranty period starts at the time of Product's original purchase by the first end-user. The Product may consist of several different parts and different parts may be covered by a different warranty period (hereinafter “Warranty

Period”). The different Warranty Periods are: a) twelve (12) months for the mobile device and accessories (whether included in the mobile device sales package or sold separately) other than the consumable parts and accessories listed in (b) and (c) below; b) six (6) months for the following consumable parts and accessories: batteries, chargers, desk stands, headsets, cables and covers; and c) ninety (90) days for the media on which any software is provided,e.g. CD-rom, memory card.

As far as your national laws permit, the Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, repair or replacement of the Product. However, repaired part(s) will be warranted for the remainder of the original Warranty Period or for sixty (60) days from the date of repair, whichever is longer.

How to get warranty service

If you wish to make a claim under the Limited Warranty, you may call the Nokia call center (where this is available and please note national rates apply to calls) and/or where necessary, return your Product or the affected part (if it is not the entire Product) to a Nokia care center or Nokia designated service location. Information about Nokia care centers, Nokia designated service locations and Nokia call centers can be found at local Nokia web pages where available.

You must return your Product or the affected part (if it is not the entire Product) to a Nokia care center or Nokia designated service location before the expiry of the Warranty Period.

When making a Limited Warranty claim you have to present: a) the Product (or affected part thereto), b) the legible and unmodified original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase, the product type and the IMEI or other serial number.

This Limited Warranty extends only to the original first end-user of the Product and is not assignable or transferable to any subsequent purchaser/end-user.

What is not covered?

1.

This Limited Warranty does not cover user manuals or any third party software, settings, content, data or links, whether included/downloaded in the Product, whether included during installment, assembly, shipping or at any other time in the delivery chain or otherwise and in any way acquired by you. To the extent permitted by applicable law(s), Nokia does not warrant that any Nokia software will meet your requirements, will work in combination with any hardware or software applications provided by a third party, that the operation of the software will be uninterrupted or error free or that any defects in the software are correctable or will be corrected.

2.

This Limited Warranty does not cover a) normal wear and tear (including, without limitation, wear and tear of camera lenses, batteries or displays), b) transport costs, c) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), d) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Nokia (e.g. as set out in the

Product's user guide) and/or e) other acts beyond the reasonable control of Nokia.

89

9251716_2865_1_en_au_oth_v1.0.fm Page 90 Friday, September 1, 2006 10:18 PM

3.

This Limited Warranty does not cover defects or alleged defects caused by the fact that the Product was used with, or connected to, a product, accessories, software and/or service not manufactured, supplied or authorised by Nokia or was used otherwise than for its intended use. Defects can be caused by viruses from your or from a third party's unauthorised access to services, other accounts, computer systems or networks. This unauthorised access can take place through hacking, password-mining or through a variety of other means.

4.

This Limited Warranty does not cover defects caused by the fact that the battery has been short-circuited or by the fact that the seals of the battery enclosure or the cells are broken or show evidence of tampering or by the fact that the battery has been used in equipment other than those for which it has been specified.

5.

This Limited Warranty does not apply if the Product has been opened, modified or repaired by anyone other than an authorised service centre, if it is repaired using unauthorised spare parts or if the Product’s serial number, the mobile accessory date code or the IMEI number has been removed, erased, defaced, altered or are illegible in any way and this shall be determined in the sole discretion of Nokia.

6.

This Limited Warranty does not apply if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions, to corrosion, to oxidation, to spillage of food or liquid or to influence from chemical products.

Other important notices

A third party, independent operator provides the SIM card and cellular and/or other network or system on which the

Product operates. Therefore, Nokia will not accept responsibility under this warranty for the operation, availability, coverage, services or range of the cellular or other network or system. Before the Product can be repaired or replaced, the operator may need to unlock any SIM-lock or other lock that may have been added to lock the product to a specific network or operator. Accordingly, Nokia does not accept responsibility for any delays in warranty repairs or for the inability of Nokia to complete warranty repairs that are caused by the operator's delay or failure to unlock any SIM-lock or other lock.

Please remember to make back-up copies or keep written records of all important content and data stored in your

Product, because content and data may be lost during repair or replacement of the Product. Nokia, in a manner consistent with the provisions of the section entitled “Limitation of Nokia's Liability” below, to the extent permitted by applicable law(s), shall not under any circumstances be liable, either expressly or impliedly, for any damages or losses of any kind whatsoever resulting from loss of, damage to, or corruption of, content or data during repair or replacement of the Product.

All parts of the Product or other equipment that Nokia has replaced shall become the property of Nokia. If the returned

Product is found not to be covered by the terms and conditions of the Limited Warranty, Nokia and its authorised service companies reserve the right to charge a handling fee. When repairing or replacing the Product, Nokia may use products or parts that are new, equivalent to new or re-conditioned.

Your Product may contain country specific elements, including software. If the Product has been re-exported from its original destination country to another country, the Product may contain country specific elements that are not considered to be a defect under this Limited Warranty.

Limitation of Nokia's liability

This Limited Warranty is your sole and exclusive remedy against Nokia and Nokia's sole and exclusive liability in respect of defects in your Product. However, this Limited Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under the applicable national laws or ii) any of your rights against the seller of the Product.

This Limited Warranty replaces all other Nokia warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. To the extent permitted by applicable law(s) Nokia does not assume any liability for loss of or damage to or corruption of data, for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Nokia’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply to death or personal injury resulting from Nokia’s proven negligence.

90

9251716_2865_1_en_au_oth_v1.0.fm Page 91 Friday, September 1, 2006 10:18 PM

Statutory obligations

This Limited Warranty must be read subject to any statutory provisions that imply warranties or conditions into this

Limited Warranty that cannot be excluded, restricted or modified or cannot be excluded, restricted or modified except to a limited extent. If such statutory provisions apply, to the extent to which Nokia is able to do so, its liability under those provisions will be limited, at its option to, in the case of goods: the replacement of the goods or the supply of equivalent goods, the repair of the goods, the payment of the cost of replacing the goods or of acquiring equivalent goods, or the payment of the cost of having the goods repaired; and in the case of services: the supplying of the services again or the payment of the cost of having the services supplied again.

NOTE! Your Product is a sophisticated electronic device. Nokia strongly encourages you to familiarise yourself with the user guide and instructions provided with and for the Product. Please also note that the Product might contain high precision displays, camera lenses and other such parts, which could be scratched or otherwise damaged if not handled very carefully.

All warranty information, product features and specifications are subject to change without notice.

Nokia Corporation

Keilalahdentie 2-4

FIN-02150 Espoo

Finland

91

9251716_2865_1_en_au_oth_v1.0.fm Page 92 Friday, September 1, 2006 10:18 PM

Index

A

About your device viii

Active profile 45

Alarm clock repeating 63 setting 63

Analog service 60

Answer calls 10

Antenna 6

Anykey answer 49

Applications collection 74 settings 59

Authenticate hologram 82

Automatic keyguard 50 redial 49 update of time and date 48 voice mail 28

B

Back cover remove 6 replace 7

Backlight time-out 47

Banner 46

Battery 6

,

88 charge 7 charging times 88 remove, replace 7 talk and standby times 88

Bluetooth connectivity 53 receive data 55 set up 54 settings 54

Business cards 35

C

Calendar 64 make notes 65 open 64 options 64 receive, send notes 66

92

settings 66 view 65

Call divert 61 duartion 31 log, see registers 30 register, see logs 30 settings 49 summary 50 time 31

Caller groups 37

Calls answer 10 conference 9 duration 31 make 9 mute phone during 10 options during 10 restrictions 58 show times on display 50 silence 10

Certification information (SAR) 87

Change lock code 58

Charger 57

,

81 connect 7 times 88

Clock settings, see time and date

Conference calls 9

Confirmation tones 47

Contacts add 34 delete 39 edit 36 search 33 settings 36 view 33

Countdown timer 70

Currency converter 70

Custom profile 45

D

Data call duration 32 calls 49

9251716_2865_1_en_au_oth_v1.0.fm Page 93 Friday, September 1, 2006 10:18 PM transfer 78

Date settings, see time and date

Dialled numbers 30

Dialling codes 34

Digital service 60

Display settings 46

Distribution lists 27

DTMF tones 51

E

Emergency calls 76

,

87

End calls 10

Enhancements 56 approved 79

Extras 74

F

Fax calls 32

,

49

Feature codes 61

Folders, see gallery

Font colour 46

G

Gallery opening folders 40 options 41

Games 74

Go to functions 5 organise 5 select 5

H

Handsfree settings 56

Headset connect 8 settings 56

Help get x in-phone 4 text activation 4

,

51

I

Indicators and icons 2

Internet, see wireless Internet

Interval timer 71

K

Keyguard automatic 50 lock and unlock 11

Keypad tones 47

L

Language 50

Lap time 72

Listen to voice mail 28

Lock code change 58 preset 57

Logs clearing 31 dialled numbers 30 missed calls 30 received calls 30

Loudspeaker 10

M

Main menu display 4

Make calls 9

Manufacturer’s limited warranty 89

Memory checking status 50 phone 50

Messages minibrowser, see minibrowser messages multimedia, see multimedia messages text, see text messages voice, see voice messages

Minibrowser 75 call duration 32 messages 29

Missed calls 30

Mobile web 75

Multimedia messages 20 create 21

,

23 delete 25 folders 21 read 22 reply 22 send 22 settings 25

Mute phone 10

93

9251716_2865_1_en_au_oth_v1.0.fm Page 94 Friday, September 1, 2006 10:18 PM

My phone number, display 39

N

Navigation key 51

Network services ix

,

61 settings 60

Network services ix

No caller IDs 50

Nokia battery authentication guidelines 82

Nokia Care Contact Center x

Nokia PC Suite 78

Nokia support and contact information x

Notes 66 options 67 send 67

O

Organiser 63

P

PC connectivity 78

Phone care and maintenance 84 details 62 lock 57 memory 50 set up your phone 6

Phone settings 50

Predictive text 12

Profiles 45

Q

Quick keys 2

R

Radio 42

Received calls 30

Recording sound 43

Repeating alarm 63

Restore factory settings 62

Ring volume 47

Ringing tone

94

for no caller ID 50

Roaming options 60

S

Safety guidelines vii

Safety information battery 88 explosive environments 86 hearing aids 86 pacemakers 85 vehicles 86

Screen saver 46

Scroll method 3

Security settings 57

Set alarm 63 date 48 time 48

Settings 45

Shared memory ix

Show call time 50

Sleep mode 47

Snooze time-out 64

Speed dial 38

,

49

Split time 72

Standby mode 1

Standby mode settings 46

Standby time 88

Start-up tone 51

Stopwatch 72

T

Talk time 88

Text entry predictive 12 standard 12

Text messages create 16 delete 19 folders 15 read 17 reply 17 send 16 settings 19 templates 17

9251716_2865_1_en_au_oth_v1.0.fm Page 95 Friday, September 1, 2006 10:18 PM

Theme 47

Time and date 48

Timed profiles 45

Timer countdown 70 interval 71

Timers 70

To-do list options 69 send 69

Tones 47

DTMF 51 start-up 51

Turn phone on or off 8

V

Vibrating alert 47

Voice commands 52 privacy 59 recorder 43

Voice messages automate 28 listen 28 mailbox number 28 setting up mailbox 28

Voice tags assign 38 delete 38 modify 38 use 38

Volume adjusting 10

W

Wallpaper 46

Warning tones 47

Wireless Internet access 75 make emergency call while online 76 sign on 75

Wireless internet clear cache 76 disconnect 76 make emergency calls 76 receive call while online 76

95

9251716_2865_1_en_au_oth_v1.0.fm Page 96 Friday, September 1, 2006 10:18 PM

SOFTWARE

USER’S GUIDE

INTERACTIVE

DEMONSTRATIONS

SETTINGS

Nokia Care Online

The Nokia Care web support provides you with more information on our online services.

INTERACTIVE DEMONSTRATIONS

Learn how to set up your phone for the first time, and find out more about its features. Interactive Demonstrations give step-by-step instructions on using your phone.

USER’S GUIDE

The online User’s Guide contains detailed information on your phone.

Remember to check regularly for updates.

SOFTWARE

Make the most of your phone with software for your phone and PC. Nokia

PC Suite connects your phone and PC so you can manage your calendar, contacts, music and images, while other applications complement its use.

SETTINGS

Certain phone functions, such as multimedia messaging, mobile browsing and email*, may require settings before you can use them.

Have them sent to your phone free of charge.

*Not available on all phones.

9251716_2865_1_en_au_oth_v1.0.fm Page 97 Friday, September 1, 2006 10:18 PM

HOW DO I USE MY PHONE?

The Set Up section, at www.nokia-asia.com/setup , helps you prepare your phone for use. Familiarise yourself with phone functions and features by referring to the

Guides and Demos section at www.nokia-asia.com/guides .

HOW DO I SYNCHRONISE MY PHONE AND PC?

Connecting your phone to a compatible PC with the requisite Nokia PC Suite version from www.nokia-asia.com/pcsuite lets you synchronise your calendar and contacts.

WHERE CAN I GET SOFTWARE FOR MY PHONE?

Get more out of your phone with downloads from the Software section at www.nokia-asia.com/software .

WHERE CAN I FIND ANSWERS TO COMMON QUESTIONS?

Look up the FAQ section at www.nokia-asia.com/faq for answers to your questions on your phone and other Nokia products and services.

HOW DO I KEEP UP WITH NOKIA NEWS?

Subscribe online to Nokia Connections at www.nokia-asia.com/signup , and be the first to know about the latest products, promotions and upcoming events.

Should you still require further assistance, please refer to www.nokia-asia.com/contactus .

For additional information on repair services, please visit www.nokia-asia.com/repair .

Please visit www.nokia-asia.com/support for details.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents