Guidelines on using the Multimedia Teaching Equipment
(A) General Procedures
2
1
1) Switch on the power before using any equipment
2) Turn on and move down the electrical screen
3) Open the equipment cabinet. Select image source – click the Display Selector to choose PC or visualizer for projection
3
Display Selector
1. PC
2. Visualizer
4) Use the remote device to switch on (off) the multimedia
projector and to choose the Computer mode (RGB mode)
.
(B) Using the Desktop PC
1) Switch on the monitor and the main unit of the desktop PC
Display Selector
2) At the Display Selector, choose PC as the image source
3) For output of sound, turn on the amplifier at the wall and adjust
the volume by using its button
*In the classroom PC, software has been provided for word processing, PowerPoint slides,
audio/video content (in CD / VCD / DVD) or web browsing. You can also use it with your USB flash
drive but don’t save your data file in the hard disk as the PC has been installed with the re-born card.
1. PC
2. Visualizer
Display Selector
(C) Using the Visualizer
1) Switch on the power button of the visualizer
2
1
2) Press the Display Selector to choose visualizer
as the image source
1. PC
2. Visualizer
After using the equipment, please put back the remote device to the cabinet. Thank you for your co-operation.
For any question, you are welcome to contact the staff of the Multimedia Services of the Rotary
International District 3450 Learning Resources Centre at tel. no.: 22567 642/ 644/ 645/ 640/ 641.
If you need further assistance or support during 5:30 pm
6:30 pm, please contact us at tel. no.: 2694 7655.
班房教學器材(多媒體投射機及電腦器材)使用說明
2
1
3
Display Selector
1. PC
2. Visualizer
Display Selector
1. PC
PowerPoint
2. Visualizer
USB Flash Drive
Display Selector
2
1
1. PC
2. Visualizer
如在下午 5:30 – 6:30 需要有關支援或協助，請撥電話 2694 7655 向當值職員査詢。
">
