TEKNA® Copper HE

TEKNA ® Guns and Accessories
www.autorefinishdevilbiss.com
TEKNA®
Copper HE
Gravity Spray Gun
4 Models Available!
Cupped or Uncupped
TEKNA® Copper HE Basecoat/Clearcoat
Gravity Feed Spray Guns
Includes:
•7E7 high efficiency air cap
•HAV-555 air adjusting valve with
digital gauge
•Extra needle/nozzle set
•Gun wrench and color ID rings
•DeKups ® Adapter (DPC-43) –
Uncupped only
Order No. Needle/Nozzle
Cup
Air Cap
703488
703489
703496
703497
Uncupped
900cc Aluminum
Uncupped
900cc Aluminum
7E7
7E7
7E7
7E7
1.2mm, 1.3mm
1.2mm, 1.3mm
1.3mm, 1.4mm
1.3mm, 1.4mm
TEKNA® Copper HE Air Caps
#7E7 Base coats, clearcoats
air cap Air Cap Order/Model No 703062
(HE)
9–11 CFM @ 16–22 PSI inlet
for HVLP approved areas
*
#202 Base coats (solvent)
air cap Air Cap Order/Model No. 702723
(HVLP) 13.5–15.5 CFM @ 18–22 PSI inlet
HAV-555
EPA Compliant.
Approved in most
EPA and
SCAQMD
HVLP areas.
Approved
* Waterborne compatible when using a
plastic or disposable cup system.
703488,
703496
703489,
703497
The DeKups ® System is covered by U.S. Patent Nos. 6,820,824
and 7,374,111, owned by 3M Innovative Properties Co., and U.S.
Patent Nos. 7,380,680; 7,354,074; 7,353,964; 7,350,418; 7,344,040;
7,263,893; 7,165,732; 7,086,549; owned by Illinois Tool Works Inc.
#909 Clearcoats, waterborne
air cap base coats
(HVLP) Air Cap Order/Model No. 702724
14–16 CFM @ 22–26 PSI inlet
Fluid
Tips
Ref.
No. Description
Fluid Nozzle
Fluid Nozzle/
Size I.D. (mm) Needle Set No.
1.1
1.2
1.3
1.4
1.5
702711
702712
702713
702714
702715
NOTE: When replacing the fluid nozzle or fluid needle,
replace both at the same time. Lightly lubricate the threads
of the fluid nozzle before reassembling. Torque 14–16 nm
(10–12 ft-lbs). Don’t over tighten the fluid nozzle. Use 10 mm
wrench supplied with gun.
Recommended
Inlet Pressure
Air Cap No. Bar/Psi
7
Air Flow
Lpm/Scfm
702723
Base coats
#202 HVLP 1.2–1.5 BAR/18–22 PSI 382–434 LPM
13.5–15.5 SCFM
702724
Clearcoats
#909 HVLP 1.5–1.8 BAR/22–26 PSI 396–453 LPM
Waterborne Base
14–16 SCFM
703062
Base coats,
clearcoats
#7E7 HE
1.1–1.5 BAR/16–22 PSI
(HVLP approved areas)
255–312 LPM/9–11 SCFM
(HVLP approved areas)
1.5–2.0 BAR/22–30 PSI 312–368 LPM11–13
(non–HVLP
SCFM
approved areas)
(non–HVLP
approved areas)
6
1
2
3
4
5
6
6
Chart 2: Air Cap Replacement Parts
Air Cap
Order No. Application
Ref.
No. Description
8
9
*10
11
*12
13
14
15
*16
*17
18
19
*20
Air Cap Retaining Ring
Slip Ring
Air Cap
Air Cap Retaining Clip
Retaining Ring Seal
Base Cap & Ring (202)
(see Chart 1)
Clear Cap & Ring (909)
(see Chart 1)
Air Cap Retaining Ring
& Seals
Fluid Nozzle (see Chart 1)
Air Separator
Air Separator Seal (kit
of 2)
Air Separator & Seal Kit
Body Bushing Gasket
Body Bushing
Body Bushing & Gasket
Fluid Needle (see Chart 1)
Needle Spring
Needle Spring Pad
Fluid Adjusting Knob
Fluid Adjusting Knob,
Spring, & Pad Kit
Retaining Clip
Part
No.
702723
Qty
1
1
1
1
1
1
702724
702725
1
702726
1
1
1
702727
702728
702729
12½"
Air Cap
Pattern
13"
Air Cap
Pattern
12"
1.1mm, 1.2mm, 1.3mm, 1.4mm,
1.5mm (for hot climate waterborne)
Refer to Technical Bulletin: TB-1002
Chart 1: Fluid Nozzle & Fluid Needle Replacement Parts
Air Cap
Pattern
1
1
1
1
1
1
1
1
1
1
21 Spreader Valve Body
*22 Spreader Valve Seal
23 Spreader Valve Adjusting
Knob
*24 Spreader Valve Pin
25 Spreader Valve Assembly
*26 Needle Packing
*27 Packing Spring
28 Packing Nut
29 Packing, Spring & Packing
Nut Kit
30 Air Valve Body
31 Air Valve Cage
32 Air Valve Poppet
33 Air Valve Spring
34 Air Valve Spring Pad
35 Air Valve Seal
36 Air Valve Assembly
*37 Trigger Stud Screw (T20
TORX)
38 Trigger
*39 Trigger Stud
40 Trigger, Stud & Screw Kit
41 Plug
42 Air Inlet
43 Colour ID Ring Kit (4
Colours)
44 Gun Body
*39 Trigger Stud
40 Trigger, Stud & Screw Kit
41 Plug
42 Air Inlet
43 Colour ID Ring Kit (4
Colours)
44 Gun Body
Part
No.
Qty
1
1
1
702730
702731
702732
702733
702734
702735
702733
702734
702735
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
* The TEKNA Spray Gun Repair Kit (702736)
contains all the parts indicated with an asterisk.
OTHER SALABLE PARTS /ACCESSORIES
Wrench (10 & 14mm)
#202 Test Cap (HVLP)
#909 Test Cap (HVLP)
Spray Gun Repair Kit
TEKNA Replacement 900cc
Aluminum Cup
Disposable Lid Kit (2)
Paint Filter Kit
702740
702738
702739
702736
702576
GFC-404-K2
KGP-5-K5