Traceable 5046 Timer Instructions
Below you will find brief information for 5046 Traceable Clip-It Timer. This document provides comprehensive instructions to help you utilize your new timer's full capabilities, including setting countdown alarms, using it as a stopwatch, recalling previous settings, and understanding its various functions. Learn how to clear the display, set specific times for countdown, and manage the alarm and count-up features effortlessly.
Advertisement
Advertisement
Advertisement
Key features
Countdown timing up to 99 hours, 59 minutes, 59 seconds
Count-up (stopwatch) timing up to 99 hours, 59 minutes, 59 seconds
1-second resolution for precise timing
Audible alarm that sounds for one minute
Memory recall function for the last countdown time
Rapid advance for setting hours, minutes, and seconds
Timeout function to pause and resume timing
Clear display to zero with a dedicated button
Frequently asked questions
If the timer is running, press the S/S button to stop it. Then, press the C button to clear the display to zero. This action also clears the previous countdown time from memory.
First, clear the display to zero using the C button. Then, press the H, M, or S buttons to advance the hours, minutes, or seconds digits respectively. You can press and hold these buttons for rapid advancement. Once your desired time is set, press the S/S button to begin countdown timing.
When the timer reaches zero, an alarm will sound for one minute, and the timer will automatically begin counting up. The alarm will turn off after one minute to conserve battery life, but the count-up timing will continue.
While the alarm is sounding, pressing any button will silence the alarm and simultaneously stop the count-up timing. After the one-minute alarm duration, pressing the S/S button will stop the count-up timing.
Yes, if timing repetitive intervals, the memory function allows you to recall the last countdown time. Once the count-up timing has been stopped (after an alarm or manually), press the S/S button to recall the original programmed time.
To use it as a stopwatch, first clear the display to zero. Then, press the S/S button to begin count-up timing. To stop the count-up timing, press the S/S button again. After timing is completed and stopped, press the C button to clear the display.