1
User Manual for Firefly Microscope GT200 Version: 1.0
D
IGITAL
M
ICROSCOPE
GT200
User Manual
THANKS FOR SELECTING A FIREFLY MICROSCOPE
To take full advantage of this product’s advanced capabilities, and to properly and safely use this product, please read the manual carefully.
2
User Manual for Firefly Microscope GT200 Version: 1.0
Copyright 2011 by Firefly Global. All rights are reserved. No one is permitted to reproduce or duplicate, in any form, this manual or any part thereof without permission from Firefly
Global (www.fireflyglobal.com).
Firefly Global assumes no responsibility for any injury, or for any illegal or improper use of the product, that may result from failure to use this product in accordance with the instructions, cautions, warnings, or indications for use published in this manual.
Software in this product is copyright of Firefly Global and its vendors. All rights are reserved.
The software is protected by U.S. and international copyright laws and international treaty provisions applicable worldwide. Under such laws, the licensee is entitled to use the copy of the software incorporated with this instrument as intended in the operation of the product in which it is embedded. The software may not be copied, decompiled, reverse-engineered, disassembled or otherwise reduced to human-perceivable form.
This is not a sale of the software or any copy of the software; all rights, title, and ownership of the software remain with Firefly and/or its vendors.
Caution: Changes or modifications not expressly approved by Firefly Global will void the purchaser’s authority to operate the equipment and its warranty.
3
User Manual for Firefly Microscope GT200 Version: 1.0
T
ABLE OF
C
ONTENTS
Table of Contents.......................................................................................................3
Introduction ..............................................................................................................4
Warnings & Cautions .................................................................................................5
Warning .................................................................................................................................... 5
Caution...................................................................................................................................... 5
Check List ..................................................................................................................7
Nomenclature ............................................................................................................8
Operation...................................................................................................................8
Operation...................................................................................................................9
Setting up the software application
： .......................................................................................... 9
Connect to PC
：......................................................................................................................... 9
Power the Device On
： .............................................................................................................. 9
recommended holding position: ................................................................................................ 10 low ratio 10-100x:.................................................................................................................... 10
high ratio >100x: ..................................................................................................................... 11
Focus： ................................................................................................................................... 11
Brightness Adjustment: ............................................................................................................ 12
Using Focus:............................................................................................................................ 12
Using the image capture control: .............................................................................................. 12
Standby and Remove device:.................................................................................................... 13
Launch the Software Application: .............................................................................................. 14
Viewing the Images: ................................................................................................................ 14
Video and Image Settings......................................................................................................... 14
Maintenance and service .........................................................................................16
Cleaning recommendation......................................................................................................... 16
Recycling the system components ............................................................................................. 16
Service policy........................................................................................................................... 17
Specifications ..........................................................................................................18
Limited Warranty ...................................................................................................19
Troubleshooting.......................................................................................................21
Frequently Asked Questions (FAQs): ......................................................................................... 21
4
User Manual for Firefly Microscope GT200 Version: 1.0
I
NTRODUCTION
The Firefly Microscope System consists of a digital Microscope and software application. Only a computer equipped with a free USB port is needed to use the system.
The Firefly Microscope System is designed for effective operation under a variety of conditions and typical video parameters are set at the factory. The software allows users to adjust most parameters including
Saturation, Hue, Brightness, Contrast and Sharpness for desired applications.
System Requirements
The Firefly Microscope System requires a user PC system running Windows XP Service Pack 2 or later operating system, a viewing screen, and a PC with an available USB 1.1 or 2.0 port.
Intended use
The Firefly Microscope System is intended to conveniently enable mobile inspection of objects.
User Profile
The Firefly Microscope System is intended for applications such as:
Art / Watches / Jewelry inspection and repairs
Electronic components inspection and repairs
Coin examination for collectors
Schools and Science Education
Medical examinations
Insect dissection and examination
Plant anatomy inspection
Skin test
Textile inspection
Industrial inspection
Print Check
5
User Manual for Firefly Microscope GT200 Version: 1.0
WARNINGS
&
CAUTIONS
Please familiarize all operating personnel with the general safety information in this summary. Specific warnings and cautions are also found throughout this manual.
Warning
A warning statement in this manual identifies a condition or practice which if not corrected or discontinued immediately, could lead to injury, illness, or death.
Do not use in the presence of flammable anesthetics.
This product has no user serviceable/replaceable parts. Please refer all service to authorized service personnel.
This instrument is not intended to be used in the eye.
This product generates and records reference images from inputs obtained from the software application FireflyPro. These reference images are not intended for medical or other diagnostic purposes.
Caution
A caution statement in this manual identifies condition or practice, which if not corrected or discontinued immediately, could lead to equipment failure, e quipment damage, or data loss.
In order to obtain optimum performance and ensure patient safety, thoroughly read this manual.
Do not use the Firefly Microscope if you notice any signs of damage to the components of the system. Contact customer service for immediate assistance.
Do not attempt to disinfect the Firefly Microscope System using glutaraldehyde products, ethylene oxide gas, steam or any other liquid or gas disinfectant.
The signal output (USB Port) connector is intended for connection of only devices complying with IEC 60601-1, or other IEC standards (for example, IEC 60950), as appropriate to the device. Connecting additional devices to the Firefly Microscope System is not allowed. You are
6
User Manual for Firefly Microscope GT200 Version: 1.0
responsible for verifying that the system complies with the requirements of the system standard IEC 60601-1-1.
This product complies with current required standards for electromagnetic interference and should not present problems to other equipment or be affected by other devices. As a precaution, avoid using this device in close proximity to other equipment.
Do not apply alcohol, chemicals, or water to the lens. Any liquids entering the optical assembly will damage internal components.
7
User Manual for Firefly Microscope GT200 Version: 1.0
C
HECK
L
IST
Before starting, check that all the following items have been included with your product. If anything is
missing, contact your dealer.
Microscope x 1pc Tripod x 1 pc Tripod Adapter x 1 pc
Stand Holder x 1 pc Clip x 1pc
Software Application CD
8
User Manual for Firefly Microscope GT200 Version: 1.0
NOMENCLATURE
9
User Manual for Firefly Microscope GT200 Version: 1.0
O
PERATION
To obtain a clear image, please grip the Firefly Microscope; remain still and avoid vibration as much as possible during observation.
Setting up the software application
：
Prior to using the Firefly Microscope for the first time, install the FireflyPro software application following the instructions provided with the installation CD.
Connect to PC
：
Connect the Firefly Microscope to the PC’s USB port
Power the Device On
：
Setting the switch to "ON/LED" will activate the device, and the red indicator will turn on.
*** The first time you open the device, Windows operating system will automatically install the appropriate device driver, while the system is installing the drivers, DO NOT TURN OFF THE DEVICE - that is do not to move switch to the OFF position or pull out the USB connector
Please wait about 2 minutes to complete the driver installation)
… Please wait for about 2 minutes …
… Windows driver installation completed …
10
User Manual for Firefly Microscope GT200 Version: 1.0
Using the Firefly Microscope System: recommended holding position:
It is suggested to hold the microscope, transparent cover forward, with the thumb held on the equipment. This holding position offers relative stability and allows lens control. The index finger is still free to rotate and adjust the focus wheel (as shown).
low ratio 10-100x:
The digital microscope is placed in the "Base". The open viewing area at the bottom of the base allows placement of samples under the microscope for observation.
View Area
11
User Manual for Firefly Microscope GT200 Version: 1.0
high ratio >100x:
When there is a need to zoom in more than 100 times, maintaining body stability becomes more paramount.
In such instances, a microscope stand is recommended. When a stand is not available, it is suggested that the digital microscope focus wheel opening should be placed towards the user , and the transparent cover vertically downward. This enables easy access to the focus wheel and a very stable position. A smooth desktop may be used as an observation platform. (Shown below )
Device vertically downward (stable observation)
Focus：
Based on the relative height of the observed object, the focus wheel can be turned for a clear image.
When a higher magnification is required, the focus wheel can be turned to the left (see below). If a larger field of view is required, the microscope can be moved farther away and the wheel turned to the right.
12
User Manual for Firefly Microscope GT200 Version: 1.0
Brightness Adjustment:
On left rear side of the microscope, a knob allows the user to control the brightness of the LEDs:
Backward Turn: Decrease Brightness
Forward Turn: Increase Brightness
Using Focus:
Default Position: Match the scale 50 to arrow mark.
Free Focus:
Rotate wheel to fine tune the image.
Using the image capture control:
Press and release the Capture button to capture image frames. The system will generate a shutter sound from the PC speaker as confirmation. C a p t u r e
13
User Manual for Firefly Microscope GT200 Version: 1.0
Standby and Remove device:
To temporarily turn off or remove the device, slide the power button to the “OFF” position. The device must also be turned off through the Windows operating system:
•
On your Microsoft Windows Desktop, click My Computer in the left pane. Double-click the USB Video Device (Wireless Digital
Microscope in Windows Vista and Windows 7).
After turning off the device through Windows above, the m can be unplugged from the PC’s USB port. Using this sequence will avoid transient voltages from potentially causing hardware damage.
14
User Manual for Firefly Microscope GT200 Version: 1.0
Launch the Software Application:
Double-click the FireflyView.exe icon on your computer desktop:
Viewing the Images:
FireflyView software controls your Firefly Microscope. The Microscope communicates with the PC through a USB cable. The user can configure the video properties, review live images, capture images, record video clips and store them for further review.
The main features of FireflyView are shown below:
Record Video
Snapshot
Preview
Help
Set
Start and stop video recording
Press to capture snapshot images
Press to freeze/unfreeze microscope image
Access detailed Users Guide information
Change video and image properties as shown below
15
User Manual for Firefly Microscope GT200 Version: 1.0
Video and Image Settings
Pressing the SET button will provide access to the following capabilities
16
User Manual for Firefly Microscope GT200 Version: 1.0
M
AINTENANCE AND SERVICE
Cleaning recommendation
CAUTION Do not apply alcohol, chemicals, or water to the lens. Any liquids entering the optical assembly will damage internal components.
Use a dry cloth to clean the Digital Firefly Microscope System on a weekly basis.
Recycling the system components
Within the EU
Do not dispose of this product as unsorted municipal refuse. Submit for separate collection as specified by Directive 2002/96/EC of the European
Parliament and the Council of the European Union on Waste Electronic and
Electrical Equipment (WEEE).
If this product is contaminated, this directive does not apply. For more specific disposal information contact Customer Service.
Outside the EU
When the product and its components reach end of life, recycle the product according to national, state, and local regulations.
17
User Manual for Firefly Microscope GT200 Version: 1.0
Service policy
All repairs on products under warranty must be performed or approved by Firefly or its authorized resellers.
Unauthorized repairs will void the warranty. In addition, whether or not covered under warranty, any product repair shall exclusively be performed by Firefly-certified service personnel.
If the product fails to function properly — or if you need assistance, service, or spare parts — contact your Firefly reseller.
Before contacting your reseller, try to duplicate the problem and check all accessories to ensure that they are not causing the problem. When calling, please be prepared to provide:
Product name and model number and complete description of the problem.
Serial number of your product (if applicable).
Complete name, address and phone number of your facility.
For out-of-warranty repairs or spare parts orders, a purchase order (or credit card) number.
For parts orders, the required spare or replacement part numbers.
If your product requires warranty, extended warranty, or non-warranty repair service, please contact your Firefly reseller. A customer service representative will assist you in troubleshooting the problem and will make every effort to solve it over the phone, avoiding potential unnecessary returns. In case a return cannot be avoided, the representative will record all necessary information and will provide a
Return Authorization number, as well as the appropriate shipping address. The Return Authorization number must be obtained prior to any return.
If you have to return your product for service, follow these recommended packing instructions:
Disconnect all hoses, cables, sensors, power cords, and ancillary products (as appropriate) before packing, unless you suspect they are associated with the problem.
Wherever possible use the original shipping carton and packing materials.
Include a packing list and the Return Authorization number.
It is recommended that all returned goods be insured. Claims for loss or damage to the product are the responsibility of the sender.
18
User Manual for Firefly Microscope GT200 Version: 1.0
SPECIFICATIONS
Weight
Dimensions (approximate)
Approximately 100 g (0.22 lb)
Length: 13.0 cm (5.2 inches)
Height: 3.6 cm (1.5 inches)
Width: 4.0 cm (1.6 inches)
Power USB 5VDC, 150mA
Protection against ingress of
water
Operating conditions
Temperature
Relative humidity
Altitude
Shipping and storage conditions
Temperature
Relative humidity
IPXØ
+10°C to +40° C (+50°F to +104°F)
30% to 75% noncondensing
700 to 1060 hPa
-20°C to +49°C (-4°F to +120°F)
95% noncondensing max.
Safety Compliance FCC, CE and RoHS compliant
19
User Manual for Firefly Microscope GT200 Version: 1.0
L
IMITED
W
ARRANTY
Limited Hardware Warranty (through distributors & resellers)
FireFly Global hardware products purchased in the U.S. come with a 1-year limited hardware warranty. The warranty is extended through Firefly Global authorized representatives and resellers. If you have a warranty claim, please contact the store, distributor, or website through which the product was purchased.
What is covered by this limited hardware warranty?
This limited hardware warranty covers defects in materials and workmanship in your FireFly Global hardware products.
What is not covered by this limited hardware warranty?
This limited hardware warranty does not cover:
•
Software, including the operating system and software added to or bundled with the FireFly Global hardware products
•
Problems that result from:
•
External causes such as accident, abuse, misuse, or problems with electrical power
•
Servicing not authorized by FireFly Global
•
Usage that is not in accordance with product instructions
•
Failure to follow the product instructions
•
Problems caused by using accessories, parts, or components not supplied by FireFly Global
•
Products with missing or altered serial numbers
•
Products for which FireFly Global or its distributors have not received payment
•
Normal wear and tear
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE (OR JURISDICTION TO JURISDICTION). FIREFLY GLOBAL'S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN
HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED
WARRANTY PERIOD REFLECTED ON YOUR PACKING SLIP OR INVOICE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED HARDWARE WARRANTY OR FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILITY FOR THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR
20
User Manual for Firefly Microscope GT200 Version: 1.0
LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS
THE MAXIMUM AMOUNT FOR WHICH WE ARE RESPONSIBLE.
How long does this limited hardware warranty last?
The limited hardware warranty on all FireFly Global products begins on the date of the packing slip, invoice, or receipt. The warranty period is not extended if a warranted product or any parts are repaired or replaced. FireFly Global may change the availability of limited hardware warranties, at its discretion, but any changes will not be retroactive.
What do I do if I need warranty service?
Before the warranty expires, please contact the store, distributor, or website through which the product was purchased.
What will FireFly Global do?
FireFly Global or its authorized representative or reseller will repair any FireFly Global hardware products returned that prove to be defective in materials or workmanship. If FireFly Global or its authorized representativse are not able to repair the product, we will replace it with a comparable product that is new or refurbished.
When you contact our authorized representatives or resellers via phone or email, they will issue a Return Material Authorization
Number for you to include with your return. You must return the products in their original or equivalent packaging, prepay shipping charges, and insure the shipment or accept the risk if the product is lost or damaged in shipment. The repaired or replacement products will be returned to you. The reseller or authorized representative will pay to ship the repaired or replaced products to you if you use an address in the United States (excluding Puerto Rico and U.S. possessions and territories). Otherwise, the product will be shipped to you freight collect.
If it is determined that the problem is not covered under this warranty, you will be notified and informed of service alternatives that are available to you on a fee basis.
How will you fix my product?
We use new and refurbished parts made by various manufacturers in performing warranty repairs and in building replacement parts and systems. Refurbished parts and systems are parts or systems that have been returned to FireFly Global, some of which were never used by a customer. All parts and systems are inspected and tested for quality. Replacement parts and systems are covered for the remaining period of the limited hardware warranty for the product you bought. FireFly Global owns all parts removed from repaired products.
May I transfer the limited hardware warranty?
Limited hardware warranties are not transferable.
21
User Manual for Firefly Microscope GT200 Version: 1.0
T
ROUBLESHOOTING
Frequently Asked Questions (FAQs):
Q1. What do I do if my Firefly Microscope and FireflyPro software suddenly stops working?
Answer: a) Shutdown the Firefly Microscope and disconnect the USB data cable from the computer. b) Close the FireflyPro software. c) Wait for one minute, reconnect the USB data cord to system and switch the Microscope on. d) Double-click the FireflyPro icon on desktop to launch the software application again.
Q2. When using the first version of Vista (not Vista SP1), there is a black visible region that randomly appears, what can I do to fix this?
Answer:
Please update Windows Vista through Microsoft update, or click Toolbar - "Set -" default” – “OK” to refresh the display.
Q3. What do I do when my computer is woken-up from standby or hibernation and FireflyPro software stops working?
Answer:
Please close and try restarting the software application again.
Q4. Why is there no image displayed on FireflyPro image windows?
Answer: a. Please verify whether the device is connected properly b. Please switch the Microscope device “OFF” and back to either “LED1” or “LED2”
Q5. The Microscope is connected to the PC, but why can it not be used?
Answer: a. Make sure the FireflyPro software is installed completely and properly. b. Please verify whether the device is connected properly c. Make sure the compact receiver is connected to the PC’s USB port. d. Please unplug the compact receiver and plug into the PC’s USB port again.
Q6. How do I uninstall the FireflyPro software?
Answer:
To uninstall, go to Start -> Settings -> Control Panel -> Programs and Features -> Uninstall
Q7. Why does the video stream appear like a mosaic and update slowly (or not smoothly)?
Answer: a. Too many software programs may be running simultaneously and overloading the CPU, or the physical memory has reached its saturation. Please close unnecessary programs. If video stream doesn’t improve, please reboot the system in order to release previously used memory.
22
User Manual for Firefly Microscope GT200 Version: 1.0
b. Check whether the system is infected by a virus. c. The PC may be too old to properly drive the video stream and does not meet the minimum standards set forth in the instructions. Please use faster system.
Q8. What to do if the FireflyPro software application crashes?
Answer:
If the system crashes, disconnect the USB data cable and switch off the Microscope. Re-boot the PC and, after system reboot, reconnect the Microscope, switch on and restart the FireflyPro application.
